Powerlight 1212D Powerlight 612D

Powerlight 1212D Powerlight 612D
Powerlight 1212D
P owerlight 1212D is a 12-channel digital dimmer (12A), mounted in a
sturdy metal 3U rack container.
A ll the controls and settings are accessible by means of the buttons on the
front panel and can be monitored on the built-in display.
The on-board microcomputer controls a comprehensive series of functions
(soft patch, channel mode, channel level, pre-heat, equalization curves, etc.).
P owerlight 1212D was designed paying great attention to reliability and
adopts avant-garde technical solutions, including internal self-diagnosis,
forced ventilation with air flow proportional to the temperature and
output protection with a thermal magnetic circuit-breaker on each
channel.
P owerlight 1212D can also be used without an external controller: in
fact, it’s possible to program 4 different chases with a maximum of 32
steps each.
O n-board software can be upgraded via RS-232. On request, 4 connector
panels are available: ILME 24, Cabur, Socapex and Powercon.
ILME 24
CABUR
SOCAPEX
POWERCON
ILME 16
Powerlight 612D
P owerlight 612D is a 6-channel digital dimmer (12A), mounted in a
sturdy metal 2U rack container.
A ll functions can be adjusted with the buttons on the front panel
and monitored on the handy backlit display.
T he on-board microcomputer controls the main functions of the
SOCAPEX
Powerlight 612D, including soft patch, channel mode, channel level,
pre-heat and various equalization curves, etc.
Powerlight 612D’s total reliability is ensured by an efficient series of electronic protections, including: overheating
protection, overvoltage protection, short-circuit protection and protection against incorrect wiring.
Powerlight 612D can also be used as a stand-alone unit: in fact, it’s possible to program 8 different chases with a
maximum of 32 steps each. Three connector panels are available on request: ILME 16, Cabur and Socapex.
CABUR
Powerlight 612D Powerlight 1212D
Number of dimmer channels
Amps per channel
Thermal magnetic circuit-breaker for each channel
Equalization curves per channel
Programmable chases
Switch-on with recall of previous status
Filter ramp time (peak to peak)
Software upgrade via DMX
DMX In and link-thru connectors
Automatic frequency selection (50/60 Hz)
110/220V 50/60Hz single-phase power supply
380V 50/60Hz 3-phase power supply
Forced ventilation cooling
Dimensions (H x L x W)
Weight
19” rack units
6
12A
7
8
70 microsec
•
•
•
•
Variable
84x442x330mm
6Kg
2
12
12A
•
7
4
•
250 microsec
•
•
•
•
•
Variable
133x442x400mm
18Kg
3
10
11
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising