FINAL THD160 Brochure with warranty change

FINAL THD160 Brochure with warranty change
®
THD-160 24-inch Load Center Forklifts
THD-160
Rated Capacity 16,000-lbs.
Taylor Tough THD-160
THD-160 16,000-lbs. capacity at 24-in. load center
92-in. wheelbase
• Tier II Cummins B4.5T-C99 mechanical turbocharged diesel
engine
• Heavy-duty 3-speed fully reversing modulated power shift
transmission
• Rugged high-strength, all welded chassis and
frames
• Ergonomically designed operator stations
• Full hydrostatic steer-on-demand steering system
• Lower fan speed and engine speed for less noise
• Large capacity steel wall fuel and hydraulic tanks
• Cooling system with wide fin spacing to reduce dirt
build-up and provide optimum engine cooling
THD-160
Engines
4-cylinder Tier II Cummins B4.5T-C99 mechanical
turbocharged diesel engine has 275 cubic-in. displacement,
and 99 gross brake horsepower at 2200 rpm. Peak torque is
305 ft.-lbs. at 1500 rpm. The fuel tank capacity is 28 gallons.
Transmission
Heavy-duty 3-speed fully reversing modulated, powershift
transmission has inching with brakes behind inching feature
and electric roll shift control and flex plate drive. Heavy-duty
spin-on oil filter is easily accessible. Separate air to oil transmission cooler.
Drive axle
Steer axle
Steer Axle
Single hydraulic cylinder design with heavy-duty links directly
from the cylinder ram to the tapered roller bearing mounted
spindles. Axle is full power hydrostatic with cast wheels with
bolt-on hub caps.
The hydrostatic steer-on-demand steering systems provide
constant response at all engine speeds and precise handling
in restricted areas. Fixed-length tie links eliminate adjustments and mechanical linkages.
Drive Axle
The bolted heavy-duty inboard planetary drive axle utilizes a
spiraled, beveled, ring gear and pinion.
Hydraulic System
Tank capacity is 26.7 gallons with
spin-on tank breather utilizing a
gear-type pump. Control valves
are separate, stacked, spooltype, and controlled with
hydraulic remotes. Dual lift
cylinders have chrome plated
rods and self-adjusting packing.
Conveniently located control
levers.
Cummins B4.5T-C99 turbocharged diesel engine
Electrical System
One piece, flip-down instrument panel for easy servicing is
prewired to accommodate heavy-duty accessories; All wiring
is color coded; 12-volt electrical system; key-type anti-restart
ignition system; heavy-duty battery; 100-amp alternator;
mechanical pressure gauges; reset circuit breakers; lighted
instruments; gauges include fuel level, hour meter, and engine
coolant temperature.
Brake System
Inboard force cooled, wet disc, air actuated over hydraulic
service brakes provide full power. Separate air to oil cooler for
brake cooling. The transmission is equipped with a springapplied/air off dry disc brake for parking.
Operator Station
Ergonomically designed to provide maximum comfort and ease
of control for the operator. The spacious rubber mounted, center
mounted operator station has removable floorboard panels
which provide easy access to components. Cab is optional.
Levers located on the operator’s right control lifting, tilting,
optional side shifting, and independent fork positioning. A tilt
steering and suspension seat for operator comfort is standard.
One piece instrument panel flips down for
convenient service access and is prewired to
accommodate heavy-duty accessories.
All wiring is color coded.
Conveniently mounted gauges and systems
warning lights and controls
Tilt steering
Hydraulic remote controls for smooth precise
control. Side shift and fork positioning optional
Anti-slip steps and handrails for 3 point
mounting and dismounting (meets new
proposed ANSI B56.1 standard)
Mast
The 11-ft. ULTRA-VU 2-stage mast provides
outstanding forward visibility through the mast
assembly. Two double-acting lift cylinders are located behind
the mast beams. Tilt cylinders are double-acting with anti-cavitation feature. Lift and tilt cylinder rods are chrome plated
and have self-adjusting packing. Tilt cylinders have adjustable
ears.
Hinge down instrument panel
Chassis
All-welded frame has an integral, sloped, counterweight and
spring-assisted hood. Removable panels provide access to components. The rubber-mounted, center mounted, operator station
and overhead guard is integral with the base assembly.
Carriage and Rollers
The 60-in. pin type carriage has
high strength-to-weight ratio;
fully adjustable from 60-in. outside to 2-in. inside forks. The
mast and carriage main rollers
are common and use sealed,
tapered, roller bearings. Chain
rollers use sealed ball bearings. Adjustable side bearings
compensate for wear.
Forks
The pin-mounted forks are
hammer forged from heat treated steel with increased thickness in critical heel sections.
2.5-in. x 6-in. x 48-in. forks are
standard.
Excellent visibility through mast, forward and rear, meeting
proposed visibility standards
Note: Components are subject to change without
notice.
Standard ULTRA-VU 2-stage
mast with excellent visibility
After Market Support
"You Can Depend On Big Red" is a personal and collective commitment from the Taylor
"Big Red" Team to every customer. Customer needs and expectations are priorities for
Taylor engineering, manufacturing, marketing, and service organizations. Sudden Service,
Inc. and our worldwide Taylor dealer network are ready to respond to your requests for
support requirements twenty-four hours a day, seven days a week!
Warranty - 12 month or 2,000 hours parts and labor. Optional warranties are available.
THD-160 with furnace charger ram
THD-160
Standard Equipment List
Cummins B4.5T-C99 Turbocharged Diesel Engine • Lockable Fuel Cap w/Strainer • Donaldson Dry-type Air Cleaner w/Safety Element, Restriction
Indicator and TaylorMax Precleaner • Muffler w/Stack Guard • 12-Volt Electrical System w/100 Amp Alternator • Reset Circuit Breakers • Antirestart Ignition Switch • Tilt Steering • Heavy-Duty Battery • Electric Horn • Keyswitch-actuated Amber Strobe Light • Reverse-actuated Backup
Alarm • Forward Alarm • Rear View Mirrors • Powershift Transmission - 3 speed w/Inching, Modulated, w/Electric Shift Control • Taylor Steer
Axle • Inboard Planetary Drive Axle • Inboard Wet Disc Air Over Hydraulic Actuated Brakes • Hydrostatic Power Steering • Pilot Operated Controls • Center Mount Operator and Overhead Guard w/Skyview Window • Adjustable Vinyl Covered Suspension Seat w/Seat Belt • Full Flow Wire
Mesh Suction Strainers and Full Flow 10-Micron Return Filter in Tank • 11’ ULTRA-VU Mast • Pin Type Carriage, 60” Wide • 8.25x15-14PR Tires •
2.5”x 6”. x 48” Forks
TAYLOR MACHINE WORKS, INC.
®
650 North Church Avenue
Louisville, Mississippi 39339-2017
(662) 773-3421 / Fax (662) 773-9146
www.taylorbigred.com
TMW-BR-100-02 (01/05)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising