A18SUB is a horn-loaded low frequency enclosure

A18SUB is a horn-loaded low frequency enclosure
A18SUB is a horn-loaded low frequency enclosure
featuring proprietary symmetric loading (patent pending).
As a horn-loaded design A18SUB is able to maintain
high efficiency and extremely fast peak response with
low distortion even at high sound pressure levels.
A18SUB features single 18” long excursion neodymium cone driver. Unique enclosure design also enables the use of 15mm birch plywood still maintaining
rigidity with free of unwanted vibrations. This makes the
enclosure lighter than average without using fibre-class
or other composite materials.
A18SUB is equipped with heavy duty wheels, ABS
handles and large corner mouldings for easy and safe
ground stacking.
Keep the pressure in sound, not on your back!
Medium size and club touring
Drum fills in bi-amped systems
Small to medium size installations
Low frequency extension for C12, C15, A8 and A6
Unique patented horn design
Extremely accurate and dynamic low
frequency reproduction
High power, long excursion 18” cone driver
Extreme power to size ratio
Rugged birch plywood construction
Textured semi-matt black paint finish
Frequency Response (-10 dB): 50 Hz – 250 Hz
Horizontal Coverage (-6 dB): 360 degrees
Vertical Coverage (-6 dB): 360 degrees
Max SPL : 133/139 dB (half space)
Sensitivity, 1w/1m: 100 dB (free space)
Impedance: 8 ohms
Crossover: 80 Hz – 200 Hz active
Power handling: 1000 W cont, 4000 W peak
Recommended HP-filter: 40 Hz, 12 dB/octave
LF: (1) x 18” neodymium magnet cone driver, 4” voice coil
Enclosure material: Birch plywood, textured black paint finish
Grille: Cold rolled steel grille, textured black paint finish
Connectors: (2) x NL4, +/-1: Input, +/-2: Linked
Dimensions: 800 mm x 500 mm x 500 mm (840 w/wheels)
Weight: 30 kg
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF