CPC304 - Elatec
CPC304
PC/104Plus AMD Geode LX800
based SBC
Best solutions
to fit your demands!
http://www.fastwel.com
AMD Geode LX800 processor;
500 MHz; from longterm
manufacturing program
PC/104 and PC/104Plus expansion
modules support; 16bit ISA
and 32bit PCI buses
256 MB soldered DDR SDRAM
Supported resolutions up to
1920×1440; VGA and LVDS interfaces;
LCD panels support
Soldered NAND flash disk 1 GB
CompactFlash Type I/II socket
Two 10/100BaseT Fast Ethernet ports
Two USB 2.0; four COM ports
Industrial operating temperature range:
–40°C to +85°C
Protective coating (option)
CPC304
PC/104Plus AMD Geode LX800 based SBC
Features
AMD Geode LX800 processor; 500 MHz
256 MB soldered DDR SDRAM
PC/104 and PC/104Plus expansion modules support;
16bit ISA and 32bit PCI buses
Supported resolutions up to 1920×1440; VGA and LVDS interfaces;
LCD panels support
Soldered NAND flash disk 1 GB
CompactFlash Type I/II socket
Two 10/100BaseT Fast Ethernet ports
Two USB 2.0; four COM ports (two isolated RS232/485 ports)
Industrial operating temperature range: –40°C to +85°C
Protective coating (option)
Technical Specifications
Overview
CPC304 is a PC/104Plus single board
computer for embedded applications. It is desig
ned for use in mission critical onboard systems
requiring low power consumption and wide
operating temperature range. CPC304
architecture is based on AMD Geode LX800 CPU
and AMD CS5536 I/O companion. CPC304
provides full support for PC/104 and PC/104
Plus expansion modules and data exchange via
both 16bit ISA and 32bit PCI buses.
All key components including CPU, chipset,
memory, and periphery controllers are soldered
onboard providing excellent vibration stability
and increased efficiency of protective conformal
coating.
CPC304 offers wide variety of data display
capabilities. System developers can take
advantage of simultaneous operation of standard
VGA interface with resolution up to 1920×1440,
24bit LVDS interface, and 18bit interface for
TFT or DSTN LCD panels connection.
Data storage subsystem is based on single
channel IDE controller, that is able to drive any
two devices out of a number of selected in BIOS
Setup and available for connection IDE devices:
two external hard drives connected via onboard
connectors, CompactFlash card, or soldered on
board 1 GB flash disk.
For data exchange, CPC304 uses two
independent Fast Ethernet ports, four COM ports,
two USB 2.0 ports, and eight programmable
discrete input/output lines.
System control and management capabilities
of CPC304 include two watchdog timers, opto
isolated remote reset input, external signal
system wakeup controller, reserved BIOS, and
possibility to save system configuration and
emergency parameters in FRAM chip.
CPC304 is manufactured in two versions:
CPC30401, full function version, and CPC304
02, "lightweight" version without LVDS interface
and onboard 1 GB NAND flash disk, with one
Fast Ethernet channel and two COM ports.
CPC304 is designed for operation within indust
rial temperature range from –40°C to +85°C.
CPC304 supports wide range of operating
systems — MS DOS, QNX, Windows XPe, Win
dows CE, RTOS32, and Linux.
http://www.fastwel.com
System
• CPU: AMD Geode LX 800 (500 MHz): 32bit x86
kernel, 64bit coprocessor, 64bit memory bus;
64 KB L1, 128 KB L2; MMX®, 3Dnow!™
technologies support
• 256 MB soldered PC333 DDR SDRAM
• MTBF: 170 000 hours
Flash BIOS
•
•
•
•
®
General Software
• 2 х 512 KB, reserved
• Insystem modification
Graphics
• Video controller: 2D accelerator, video memory
up to 64 MB (shared with system)
• LCD (TFT or DSTN) panels support, resolutions
up to 1024×768 at 60 Hz, 18bit color depth via
TFT interface, 24bit via LVDS interface
• RGB monitor support, resolutions up to
1600×1200 at 85 Hz or 1920×1440 at 75 Hz, 32 bit
Storage
• Flash disk: soldered, 1 GB NAND flash, IDE
interface
• CompactFlash Type I/II socket
• EIDE: one primary channel, up to two devices
connection (when flash disk is disabled in BIOS
Setup and there is no storage device in
CompactFlash socket), UltraDMA/100 support
•
•
•
•
COM3, COM4: RS422 / RS485, isolated,
up to 115.2 Kb/s
Console operation via COM1 serial port
Audio controller: AC97 compatible, stereo line
input/output, microphone input
PS/2: keyboard and mouse port
Digital input/output: eight 8bit input/output lines,
individually programmable
External PME signal use: awakens a sleeping
system in response to an external wakeup signal
CMOS+SFRAM for storage of configuration
parameters
RTC with lithium battery
Optoisolated reset/interrupt
Two watchdog timers: one programmable timer,
one hardware based timer with fixed timeout
period
Mechanical
• Dimensions: 115.6×101.5×23.7 mm
(4.55"×4"×0.93")
• Weight: 0.1 kg
Power requirements
• 5 V ±5%, 1.3 A
Environmental conditions
•
•
•
•
Operating temperature range: –40°C to +85°C
Storage temperature range: –55°C to +90°C
Humidity: 0% to 95%, noncondensing
Shocks/vibration: 50G/10G
Software support
•
•
•
•
•
Fastwel DOS™ (MS™ DOS compatible)
QNX 6.3х, QNX 4.25
Windows XPE, CE
RTOS32
Linux 2.4.20
Interfaces
• Two Fast Ethernet controllers, 10/100 BaseT
(10/100 Mb/s)
• USB 1.1, USB 2.0 support, up to two devices
connection
• Shared FDD/LPT connector: FDD controller and
universal parallel port with EPP and ECP support
share one connector
• Serial ports:
COM1, COM2: RS232, full control,
up to 115.2 Kb/s
List of deliverables
• CPC304 module with heatsink installed
• Ribbon cable for 2.5" HDD connection, 44 threads
• Adapter for 3.5" HDD and CDROM drive
connection
• IDC10DB9 adapter cable for connection of a
console to COM port
• Lithium battery
• CD with software and documentation
• Package
Warranty:
• 3 years for parts and labor
CPC304
PC/104Plus AMD Geode LX800 based SBC
Board Layout
Top wiew
Bottom wiew
Accessories
KIB380 Interface Adapter Module for CPC304
KIB380 makes interfaces of the processor module
available via standard PC connectors – VGA, Audio
(Mic, Line In, Line Out), four COM ports, two LAN,
two USB, two PS/2 for keyboard and mouse, and
LPT.
Please, see User Manual for details.
Top view
http://www.fastwel.com
Bottom view
CPC304
PC/104Plus AMD Geode LX800 based SBC
Ordering Information
CPC304 Configuration
CPC304 01 \Options
Device Type
CPС30401 PC/104Plus board, AMD Geode LX800
500 MHz CPU, AMD CS5536 I/O, RAM
256 MB, VGA, LCD, LVDS, 16bit ISA,
32bit PCI, 2 Ethernet 10/100 BaseT, IDE
flash disk 1 GB, CompactFlash socket, 2
USB 2.0, COM1 COM4, –40°C to +85°C
CPС30402 PC/104Plus board, AMD Geode LX800
500 MHz CPU, AMD CS5536 I/O, RAM
256 MB, VGA, LCD, 16bit ISA, 32bit PCI,
1 Ethernet 10/100 BaseT, CompactFlash
socket, 2 USB 2.0, COM1 COM2,
–40°C to +85°C
Options
\xxx
Choose available options from the table
CPC304 Available Options
Compact Flash Module
\CF1024
\CF2G
\CF4G
\CF8G
\CF16G
Coating
\COATED
Operating System Presetting
\FDOS
\QNX
\WCE
\LNX
1024 MB Compact Flash, industrial
2 GB Compact Flash, industrial
4 GB Compact Flash, industrial
8 GB Compact Flash, industrial
16 GB Compact Flash, industrial
Protective Coating
Fastwel DOS
QNX 6
Windows CE
Linux 2.4.20
Other configurations and options are available upon request.
Example
CPC30401\CF1024\COATED\WCE
PC/104Plus board, AMD Geode LX800 500 MHz CPU, AMD CS5536 I/O, RAM 256 MB,
VGA, LCD, LVDS, 16bit ISA, 32bit PCI, 2 Ethernet 10/100 BaseT, IDE flash disk 1 GB,
CompactFlash socket, 2 USB 2.0, COM1 COM4, –40°C to +85°C
1024MB Compact Flash, industrial
Portective coating
Windows CE
Ver. 1.01 2012
Product specifications are subject to change without notice
Applications
Mobile
Industrial Automation
Communications
Embedded
Corporate Offices
V
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising