E thernet S w itc h
ES4626F/ES4650F
Managed 24/48 port Gigabit Stackable
L3 Ethernet Switch with 4 combo SFP slots
Product Overview
The Edge-Core ES4600 series is a stackable Gigabit Ethernet routing switch with a choice of 24 or 48 Gigabit
10/100/1000BASE-T ports, 4 combo Gigabit Ethernet SFP slots and 2 optional 10 Gigabit Ethernet slots and 2 stacking
ports on the rear panel. The ES4600 series is ideal for service provider edge aggregation, Enterprise wiring closets,
data center aggregation and network core deployment. It provides high performance, resilient stacking, wire speed L2
switching and L3 routing, comprehensive QoS and advanced security to deliver the scalability and resiliency to increase
your company’s productivity while reducing operation cost.
Key Features and Benefits
Resilient Stacking up to 8 units
The Edge-core ES4600 series currently includes 2 different models
ES4626F and ES4650F with dual optional10 Gigabit Ethernet uplinks.
The two models provide fully non-blocking performance to fulfill the
most network demands for voice and video streaming. Optional
10GBASE-XFP10 transceivers can support up to 40km for fiber uplinks.
The Edge-core ES4600 series provides two stacking ports for hardware
stacking up to 320Gbps throughput. Any combination of ES4600 series
units can be stacked up to 8 units high or to a maximum of 400 ports.
The stack acts as a single switching unit that is managed by a master
switch, elected from one of the member switches. The master switch
automatically creates and updates all the switching and optional routing
tables. A working stack can add new members or delete old ones
without service interruption.
High Availability
Ethernet Switch
With IEEE 802.1w Rapid Spanning Tree Protocol, the Edge-Core
ES4600 series provides a loop free network and redundant links to the
core network with rapid convergence less than 2 second. IEEE 802.1s
Multiple Spanning Tree Protocol allows a spanning-tree instance per
VLAN, for Layer 2 load sharing on redundant links.
The Edge-Core 4600 series supports IEEE 802.3ad Link Aggregation
Control Protocol (LACP). It increases bandwidth by automatically
aggregating several physical links together as a logical trunk and offers
load balancing and fault tolerance for uplink connections.
Adding Optional Redundant Power Supply ensures that the Edge-Core
ES4600 series delivers the stable and redundant power support for
today’s high-availability, mission-critical environments.
Comprehensive QoS
The Edge-Core ES4600 series offers advance QoS for marking,
classification, and scheduling to deliver best-in-class performance for
data, voice, and video traffic at wire speed. 8 egress queues per port
enable differentiated management of up to 8 traffic types across the
stack. Traffic is prioritized according to 802.1p, DSCP, IP precedence
and TCP/UDP port number to provide optimal performance to real-time
applications. Weight Round Robin (WRR) and strict priority ensure
differential prioritization of packet flows and avoid congestion of ingress
and egress queues.
With bidirectional rate-limiting, per port or traffic class, the Edge-Core
ES4600 series preserves network bandwidth and allows full control of
network resources.
Enhanced Security
The Edge Core ES4600 series provides enhanced security features for
connectivity and access control, including ACLs, authentication and
port-level security with IEEE 802.1X. Access Control Lists (ACLs) can
be used to restrict access to sensitive network resources by denying
packets based on L2/L3/L4 headers. SSH and RADIUS authentication
protect data communication and ensure data privacy. IEEE 802.1X
port-based access control ensures dynamic, port-based security and
user authentication for network access
IP source guard prevents a malicious user from spoofing or taking over
another user's IP address by creating a binding table between client's
IP and MAC address, port, and VLAN.
Simplified Management
For IP multicast traffic, the Edge-Core enables IGMP snooping to
provide fast client joins and leaves of multicast streams. It prevents
flooding of IP multicast traffic, and limits bandwidth intensive video
traffic to only the subscribers.
The Edge-Core ES4600 series supports IPv6 management functions in
SNMP/HTTP/Telnet/TFTP/ICMP, SSH, RADIUS/TACACS+
authentication and IPv6 QoS remapping when connecting to the switch
or stack.
The Edge-Core ES4600 series can be managed through By industry
standard Command Line Interface (CLI) which provides a common
industry look and feel to reduce training and operating costs. It also
provides easy-of use Web GUI interface through a standard web
browser.
With four groups of RMON, the Edge-Core ES4600 series can easily
backup and restore Firmware and configuration files via TFTP.
Advanced IPv6 and IPv4 Routing
The Edge-Core ES4600 series supports hardware based IPv6 and IPv4
routing hardware for maximum performance. It provides seamless
migration path from IPv4 to IPv6 for future network upgrades and
investment protection.
Advanced routing protocols such as RIP and OSPF provide dynamic
routing by exchanging routing information with other Layer 3 switches
or routers. Multicast routing is supported under independent multicast
protocol, including PIM-DM*, and PIM-SM*. DVMRP* is also supported
to interconnect two multicast-enabled networks across non-multicast
networks. VRRP prevents your system from failing by dynamically
backing up multiple L3 switches for routing.
www.Edge-Core.com
ES4626F/ES4650F Product Specifications
Features
Physical Ports
20 or 44 RJ-45 10/100/1000Base-T ports
4 Combo G (RJ-45/SFP) ports
2 stacking ports on the rear panel
2 optional I/O Slots for 10G uplink
1 RJ-45 console port
1 Redundant Power Supply Connector
Performance
Switching Capacity: 88Gbps/136Gbps
Forwarding Rate: 65.5Mpps/101.2Mpps
MAC Address Table Size: 16K
Packet Buffer Size: 2MB/4MB
L2 Features
Auto-negotiation for port speed and duplex mode
Flow Control: IEEE 802.3x & Back-Pressure
Spanning Tree Protocol:
IEEE 802.1D Spanning Tree Protocol (STP)
IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
VLANs:
 Support 4K IEEE 802.11Q VLANs, port-based VLANs, GVRP
 Private VLAN
Link Aggregation:
Static Trunk, IEEE 802.3ad Link Aggregation Control Protocol
Trunk groups: 8
Trunk links: 2~8 for Gigabit Ethernet port
Trunk links: 2~4 for 10 Gigabit Ethernet port
IGMP Snooping: IGMP v1 , v2 and v3* snooping and IGMP queries
L3 Features
2K IP Address entries
512 static routes
ARP
Multi-netting, Super-netting (CIDR)
RIPv1, RIPv2
OSPF
DVMRP*, PIM-DM* , PIM-SM*
VRRP
IPv6 hardware IP routing, future firmware upgrade
Policy based routing
DHCP/BootP relay, DHCP server
QoS Features
Priority Queues: 8 hardware queues per port
Traffic classification based on IEEE 802.1p CoS, IP Precedence, DSCP,
TCP/UDP port number, Access Control List, Marking
DiffServ
Supports WRR and Strict Priority
Port Rate Limiting
Security
Port Security
IP Source Guard*
Supports IEEE 802.1X port-based and MAC based access control
IP filtering configuration for management interface (SNMP, Telnet, Web)
RADIUS authentication
Access Control List
SSH v2
HTTPS/SSL
Management
Switch Management:
CLI via console port or Telnet
WEB management
SNMP v1, v2c, v3
IGMP snooping (v1/v2)
Firmware & Configuration:
Dual firmware images
Firmware upgrade via TFTP/FTP/Xmodem
Multiple configuration files
Configuration file upload/download via TFTP/FTP server
Supports RMON (groups 1, 2, 3 and 9)
Supports BOOTP, DHCP for IP address assignment
DHCP Snooping*
DHCP option 82*
Supports SNTP
Supports Event/Error log/ System log
IPv6:
SNMP/HTTP/Telnet/SSH/ICMP/RADIUS/SSH/SMTP/ACL/Dual
Stack/Neighbor discover/ DSCP remapping CoS/System log/DNS
resolver/TFTP/Remote Ping
SNMP Standards
RFC 1907 SNMPv2-MIB (MIB-II)
RFC 2011 IP-MIB (MIB-II)
RFC 2012 TCP-MIB (MIB-II)
RFC 2013 UDP-MIB (MIB-II)
IEEE 802.1X IEEE8021-PAE-MIB
RFC 1493 Bridge MIB
RFC 2863 IF-MIB
RFC 2819 RMON MIB
RFC 2618 RADIUS MIB
RFC 2665 Etherlike MIB
RFC 2737 Entity MIB
RFC 2674 P-bridge, Q-bridge
V-Bridge MIB
RFC 3036 MAU MIB
RFC 1612 DNS Reslover MIB
RFC 3411 SNMP FrameWork
RFC 3412 SNMP MPD MIB
RFC 3413 SNMP Target MIB, SNMP Notify MIB
RFC 3415 SNMP View-Based ACM MIB
SNMP Trap Supported:
RFC 1215, 1907, 2863, 1493, 1757, 2819
Private MIB
Mechanical
Dimensions (H x W x D): 4.4 x 44 x 41.5 cm (1RU)
LED Indicators: Port, Uplink, System, Diagnostic
AC Power Input: 100 ~ 240VAC, 50 ~ 60Hz
Weight:
ES4626F: 3.72 kg (8.44 lbs)
ES4650F: 4.34 kg (9.59 lbs)
Safety
CSA/NRTL (UL60950, CSA 22.2.No 60950-00)
TUV/GS (EN60950)
CB
Electromagnetic Compatibility
CE Mark(EN50081-1: EN55022 Class A, EN50082-1:IEC 1000-4-2/3/4/6),
EN60555-2 Class A, EN60555-3
FCC Class A
VCCI Class A
* Future Release
TEL: 886-3-5053801 FAX: 886-3-5780764
1, Creation Rd. 3, Hsinchu Science Park Hsinchu Taiwan 30077
sales_ec@edge-core.com
www.edge-core.com
DS_ES4626F_4650F
08/2009
ES4626F/ES4650F Product Specifications
Features
Environmental Specifications
Temperature:
IEC 68-2-14
0℃ to 50℃ (Standard Operating)
-40℃ to 70℃ (Non-Operating)
Humidity:5% to 95% (Non-condensing)
Vibration: IEC 68-2-36, IEC 68-2-6
Shock: IEC 68-2-29
Drop: IEC 68-2-32
Reliability
ES4626F
MTBF 25℃
MTBF 550℃
ES4650F
MTBF 25℃
MTBF 55℃
122,388 hours
35,535 hours
132,087 hours
45,739 hours
Warranty
Electrical
Limited lifetime warranty
Power Consumption (Max.):
ES4626F
 49.6 Watts (without expansion XFP modules)
 63.96 Watts (with two expansion XFP modules)
ES4650F
 98.16 Watts (without expansion XFP modules)
 104.16 Watts (with two expansion XFP modules)
Power characteristics:
Voltage:
100-240V AC auto-ranging
Frequency:
47-63Hz
Current:
ES4626F
 0.58 A @ 110 VAC (without expansion XFP modules)
 0.74 A @ 110 VAC (with two expansion XFP modules)
 0.312 A @ 240 VAC (without expansion XFP modules)
 0.375 A @ 240 VAC (with two expansion XFP modules)
ES4650F
 0.995 A @ 110 VAC (without expansion XFP modules)
 1.21 A @ 110 VAC (with two expansion XFP modules)
 0.54 A @ 240 VAC (without expansion XFP modules)
 0.605 A @ 240 VAC (with two expansion XFP modules)
Standards & Compliance
IEEE 802.1D (STP)
IEEE 802.1p (Cos)
IEEE 802.1Q (VLANs)
IEEE 802.1w Rapid Reconfiguration Spanning Tree
IEEE 802.2 (LLC)
IEEE 802.3 10Base-T
IEEE 802.3u 100BASE-TX and 100BASE-FX
IEEE 802.3x flow control support
IEEE 802.3z (1000Base-SX/LX)
IEEE 802.3ab (1000Base-TX)
IEEE 802.3ac (VLAN tag)
IEEE 802.3ad (Link Aggregation)
IEEE 802.1Q (VLANs)
Ordering Information
Optional Accessories
RPS600WA
EM4625-STKCABLE-S
EM4625-STKCABLE-L
EM4626H-XG-XFP
ET4201-SX
ET4201-LX
ET4201-LHX
ET4201-ZX
ET5302-SR
ES5302-LR
ET5302-ER
TEL: 886-3-5053801 FAX: 886-3-5780764
1, Creation Rd. 3, Hsinchu Science Park Hsinchu Taiwan 30077
sales_ec@edge-core.com
www.edge-core.com
Product Description
4 DC output redundant power supply connectors (Supports max. power output
150W/12V per port)
1 port 10GBase-LR module with XFP connector
DS_ES4626F_4650F
08/2009
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising