Volume 1: Basic devices and single-space systems

Volume 1: Basic devices and single-space systems
Volume 1: Basic devices and single-space systems
Specification guide to wallbox dimmers, switches, sensors
and accessories for commercial and residential applications
Volume 1: Basic devices and single-space systems
Lutron products for every application:
• Residential or commercial
• Retrofit, renovation or new construction
• In this guide: basic devices and single-space systems
for North and South America (120 V, 277 V and 347 V)
Solutions available for applications worldwide: consult www.lutron.com/international
Basic devices
Single-space systems
Radio Frequency (RF) and Infrared (IR)
Dimmers
Switches
RF dimmers and
switches
RF occupancy/
vacancy and
daylight sensors
Occupancy/
vacancy sensors
Accessories
RF controls
IR dimmers and controls
Table of contents
2Scalable
light
management solutions
4
New energy-saving products
Four steps to selecting your control
5 Step 1. Select your control by style
6Step 2. Consider the required number of
control locations
7Step 3. Select your model by lighting load
type and quantity
11A Step 4. Additional selection considerations
Dimmer families
12 14
New Architectural wallplate opening
Vierti®
20
26 34
42
Architectural wallplate opening
Vareo®
Nova Tb®
Nova ®
Centurion ®
46
60
68
76
86
94
100
104
Designer wallplate opening
Maestro ®
Maestro IR ®
Maestro Wireless ®
Spacer System ®
Diva ®
Lyneo ® Lx
Skylark ContourTM
Skylark ®
114
120
124
130
134
Traditional wallplate opening
Abella ®
Ceana ®
Ariadni ®
Glyder ®
Rotary
138
Lamp dimmers
Credenza ® and Attaché ®
www.lutron.com | 1.800.523.9466 |
140
144
146
Sensors
Maestro® wallbox occupancy/vacancy sensor
Radio Powr Savr TM occupancy/vacancy sensor
Radio Powr Savr TM daylight sensor
148
152
160
166
New Architectural
Architectural
Designer | Claro ® and Satin Colors ®
Traditional | Fassada ®
Wallplates and accessories
169 170 174 180 196 202 225 Control mounting requirements
Ganging and derating
Lighting load interfaces
Wiring diagrams
Glossary
Visual index
Patents, trademarks and product approvals
Appendix
Other volumes
Small area and multiple room systems
Integrated solutions for small areas or multiple room
Entire home, building or campus systems
Integrated solutions for whole home, building or
campus of buildings
Shading systems
Shade and drapery systems that can function as a
standalone shading system, or can be integrated
within the above systems
Ballasts, drivers and fixtures
Fluorescent dimming ballasts, LED drivers and
complete dimmable lighting fixtures
1
Lutron | Scalable light management solutions
Basic energy-saving devices
Switches
On = 100% light, 100% energy
Off = 0% light, 0% energy
light
level/
energy
off
on
off
time
Dimmers
All Lutron dimmers save energy.
Light level is proportional
to energy use. 50% dimmed
uses only 60% of the energy—
saves 40%.
light
level
50
60
energy
used
Occupancy/vacancy sensors
Occupancy/vacancy sensors
guarantee energy savings by
turning lights off when rooms
are unoccupied.
occupied
on
unoccupied
off
Daylight sensors
As daylight increases in the room,
electrical light energy is reduced.
daylight
energy
used
www.lutron.com | 1.800.523.9466 |
2
System solutions
1.Single-space systems
Commercial
Residential
Tie multiple dimmers and switches together
with wireless sensors and remote controls
•Perfect for retrofit, renovation or
new construction
•
2.Small areas and larger rooms
Add integrated control of window shades
and tie in with A/V or other building systems
•Wired or wireless communication for retrofit,
renovation or new construction
•
3.Multiple rooms
Expand control across multiple rooms—
even an entire floor
•Wireless components and digital
devices provide for easy reconfiguration
without re-wiring
•
4.Entire home, building or campus
Manage control of daylight and electric
light on any scale
•Homeowners and facility managers can
maximize energy efficiency, comfort,
convenience and productivity
•Display and optimize light and energy
use across the entire system
•
www.lutron.com | 1.800.523.9466 |
3
New energy-saving products
New C•L dimmers
Dimmers and switches
C•LTM dimmers offer more
reliable dimming performance
over standard dimmers when
dimming CFLs and LEDs. They
also provide full range dimming for
incandescent and halogen bulbs
as well as mixed loads types.
eco-dimTM dimmer
guarantees at least
15% energy savings
compared to a
standard switch
eco-timer switch
includes countdown timer
with 30 minute maximum
(no “always-on”), automatically
turns off fans or lights
Radio Powr SavrTM
ceiling mounted wireless
daylight sensor
Maestro® digital dimmer
or switch with integrated
occupancy/vacancy sensor
PicoTM Wireless controls
compatible with all Maestro
Wireless radio frequency
(RF) devices
Maestro Wireless 3-wire
fluorescent dimmers and
2-wire switches
Sensors
Radio Powr SavrTM
ceiling or wall-mounted wireless
occupancy/vacancy sensor
eliminates power pack and
wiring expense
Wireless single-space controls
Maestro Wireless® plug-in
modules for plug-in lamp and
appliance loads
www.lutron.com | 1.800.523.9466 |
4
Four steps to selecting your control | Step 1
1. Select your control by style
M Multi-location dimming—see pg. 8
Occupancy/vacancy sensor—see pg. 144
Color options and available models are
detailed in each product family section.
Daylight sensor—see pg. 146
New Architectural
Architectural
Vierti®
M Touch slider
pg. 14
Vareo®
Big switch
little slider
pg. 20
Nova Tb®
Slider
pg. 26
Maestro®
M Preset rocker*
pg. 46
Maestro IR®
M Preset rocker*
pg. 60
Maestro Wireless®
M Preset rocker*
pg. 68
Spacer System®
M Preset rocker*
pg. 76
Diva®
Big switch
little slider
pg. 86
Ceana®
Preset slider
pg. 120
Nova®
Slider
pg. 34
Centurion®
Rotate
pg. 42
Lyneo® Lx
Preset slider
pg. 94
Skylark ContourTM
Preset slider
pg. 100
Skylark®
Preset slider
pg. 104
Ariadni®**
Big switch
little slider
pg. 124
Glyder®
Slider
pg. 130
Rotary
Rotate
pg. 134
Designer
Traditional
Abella®
M Preset rocker*
pg. 114
www.lutron.com | 1.800.523.9466 |
*Rocker is also referred to as raise/lower
**Also known as TogglerTM
5
Four steps to selecting your control | Step 2
2. Consider the required number of control locations
The number of desired dimming and switching
control locations determines the control types
and quantities required.
a.Control lights from one location only
Single-pole dimmer required (3-way and
multi-location dimmers may also be used).
Lighting
Source
Single-pole
Dimmer
3-way
Dimmer
3-way
Dimmer
Multilocation
Dimmer
Companion
Dimmer
Additional
Companion
Dimmers
e.Wireless multi-location dimming
True dimming from all locations,
Maestro Wireless® and PicoTM Wireless
control(s) required.
3-way
Switch
c. Control lights from three or
more locations
Dimming from one location, switching from
other locations, 3-way dimmer required.
Lighting
Source
d.Multi-location dimming
True dimming from all locations. Multi-location
electronic dimmer and companion dimmer(s)
required. Indicated by M in selection tables,
pg. 8–9, 10–11.
Lighting
Source
b.Control lights from two locations
Dimming from one location, switching from
second location. 3-way dimmer required.
Lighting
Source
4-way
Switch
(1 or more)
www.lutron.com | 1.800.523.9466 |
3-way
Switch
Lighting
Source
Wireless
Maestro
Dimmer
Pico Wireless
Control
(1 or more)
Pico wireless mounting options
Handheld
Control
Wall-Mount
(Surface
Mount or
Wallbox)
Tabletop Control
(Single or Dual
Mount Pedestal)
6
Four steps to selecting your control | Step 3
3.Select your model by lighting load type and quantity
Lutron dimmers are designed, tested and UL
listed for specific load types up to a maximum
capacity. To select a specific dimmer by load
type, see pg. 8.
Incandescent/halogen lighting (INC)
Excellent color rendering and can dim
to off.
Loads are quantified in Watts (W).
Incandescent/halogen dimmers required.
ELV or MLV dimmers can also be used to
dim incandescent/halogen.
Electronic low-voltage lighting (ELV)
Track and recessed lights typically use
electronic low-voltage transformers and
halogen low-voltage lamps.
Loads are quantified in Watts (W).
ELV dimmers are required.
Magnetic low-voltage lighting (MLV)
Fluorescent lighting (FL)
Linear, U-bent, twin-tube and 4-pin compact
fluorescent lamps are dimmable when paired
with the appropriate electronic dimming ballast.
Fluorescent lamp and ballast loads are quantified
in Amps (A) and are determined by the specific
type and number of ballasts being used.
Dimmers must also match the control signal
required by the ballast (i.e., 3-wire, 2-wire
or 0-10 V).
For information on Lutron dimming ballasts,
see www.lutron.com/ballasts
For dimmable screw-base CFL options,
see pg. 11A.
Light Emitting Diode lighting (LED)
LED light sources are composed of the LED
array (lamp module) and a driver which powers
the array.
Today, there is no common industry standard
for rating and control of LED sources.
Lutron's recommended approach to
control LED lamp modules is the use of a
Lutron Hi-lume® LED driver and a 3-wire
fluorescent dimmer.
Track and recessed lights can also use
magnetic low-voltage transformers and
halogen low-voltage lamps.
Loads are quantified in Volt-Ampere (VA),
combining the total lamp wattage with
20% additional load due to heat losses in
the MLV transformer.
MLV dimmers are required.
Other Lutron approved lamp module/driver
combinations can be dimmed with specific
Lutron controls.
See www.lutron.com/LED for a list of approved
fixtures with Lutron drivers and other approved
fixture/control combinations.
For dimmable screw-base LED bulbs,
see pg. 11A.
Neon-cold cathode lighting (NCC)
Dimming NCC requires a dimmable
electronic or magnetic step-up transformer
and a matching dimmer.
NCC loads are quantified in Watts (W) or
Volt-Ampere (VA).
NCC is typically dimmable using a Lutron®
3-wire fluorescent dimmer with a power
interface. See pg. 174 for more information
on lighting load interfaces.
www.lutron.com | 1.800.523.9466 |
• For further information on selecting the right
lamp type, go to www.lutron.com/bulb.
•
Load capacity must be reduced if controls are
ganged. For further information on derating,
see pg. 170.
7
Four steps to selecting your control | Step 3 continued
3. Select your control by load type
New Architectural and Architectural style
Dimmer capabilities and
interface requirements
Compatible
dimmer (no interface)
M Multi-location—true dimming from each location
I Lighting load interface solutions may be available for
additional load types, see pg. 174 for more details
Vierti®
pg. 14
Vareo®
pg. 20
Nova Tb® Nova®
pg. 34
pg. 26
Centurion®
pg. 42
M
Dimmers
Voltage
Incandescent/halogen
120 V
eco-dim® incandescent/halogen
120 V
eco-minderTM incandescent/halogen
120 V
Dimmable CFL/LED (screw-base)
120 V
Magnetic low-voltage
Electronic low-voltage
Neon/cold cathode
LED with Hi-lume® LED driver
LED with 0-10 V LED driver
120 V
277 V
I
120 V
I
277 V
I
I
120 V
I
I
I
I
120 V
277 V
120/277 V
I
I
I
Dimmers for fluorescent ballasts
3-wire: Hi-lume®, Compact SETM
Hi-lume® 3D, EcoSystem®, Eco-10®
120 V
277 V
I
2-wire: Tu-Wire®
120 V
I
0-10 VDC control
120/277 V
I
I
I
I
Fan controls
Quiet
Fully variable
Fan/light
120 V
120 V
120 V
Switches and timers
120 V
Electronic switch
Mechanical switch
Countdown timer switch
120 V
eco-timer switch
120 V
www.lutron.com | 1.800.523.9466 |
277 V
120 V
277 V
8
Designer style
Maestro®
pg. 46
M
I
Maestro
IR®
pg. 60 M
Maestro
Wireless®
pg. 68 M
Spacer
System®
pg. 76 M
I
I
I
I
I
I
I
I
I
I
I
I
I
I
Diva®
pg. 86
Lyneo® Lx Skylark
pg. 94
ContourTM
pg.100
Skylark®
pg. 104
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
www.lutron.com | 1.800.523.9466 |
9
Four steps to selecting your control | Step 3 continued
3. Select your control by load type
Dimmer capabilities and
interface requirements
Traditional style
Compatible
dimmer (no interface)
M Multi-location—true dimming from each location
I Lighting load interface solutions may be available for
additional load types, see pg. 174 for more details
Abella®
pg. 114
Ceana®
pg. 120
Ariadni®
pg. 124
Glyder®
pg. 130
Rotary
pg. 134
M
Dimmers
Voltage
Incandescent/halogen
120 V
eco-dim® incandescent/halogen
120 V
eco-minderTM incandescent/halogen
120 V
Dimmable CFL/LED (screw-base)
120 V
Magnetic low-voltage
Electronic low-voltage
Neon/cold cathode
LED with Hi-lume® LED driver
LED with 0-10 V LED driver
120 V
277 V
I
120 V
I
277 V
I
120 V
I
120 V
277 V
120/277 V
I
Dimmers for fluorescent ballasts
3-wire: Hi-lume®, Compact SETM
Hi-lume® 3D, EcoSystem®, Eco-10®
120 V
2-wire: Tu-Wire®
120 V
I
0-10 VDC control
120/277 V
I
277 V
Fan controls
Quiet
Fully variable
Fan/light
120 V
120 V
120 V
Switches and timers
120 V
Electronic switch
Mechanical switch
Countdown timer switch
120 V
eco-timer switch
120 V
www.lutron.com | 1.800.523.9466 |
277 V
I
120 V
277 V
10
Four steps to selecting your control | Step 3 continued
Sensor dimmers
and switches
Wireless occupancy/ Daylight
vacancy sensors†
sensors†
Maestro occupancy/
vacancy sensors
pg. 140
Radio Powr SavrTM
pg. 144
Lamp dimmers
Credenza® Attaché®
Radio
pg. 139
Powr Savr pg. 139
pg. 146
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
Wireless
lamp
dimmers
Wireless lamp/
appliance
modules
Maestro®
wireless
pg. 70
Maestro®
wireless
pg. 70
Radio Powr Savr now works with Maestro
Wireless® dimmers or switches as indicated
*LOS series available, see pg. 140
**Switching model only
www.lutron.com | 1.800.523.9466 |
†
11
Four steps to selecting your control | Step 4
4.Additional selection
considerations
Ganging and derating
Ganging is the mounting of two or more
dimmers or accessory devices side-by-side
under a multi-gang wallplate. When you
combine two or more dimmers, you may
need to derate the power rating and remove
a portion of the dimmer beneath the wallplate.
See pg. 170 for details.
Lighting load interfaces
To dim larger loads on a single dimmer, you can
use a power interface. Interfaces require 3-wire
dimmers and may require additional power feeds
from distribution panels. See pg. 174 for details.
Dimmable Compact Fluorescent
(CFL) and LED bulbs (screw-base)
Dimmable CFL and LED lamps offer energy
efficiency and long life. C•LTM dimmers are UL
listed for controlling a broad range of dimmable
CFLs and LEDs. They offer more reliable dimming
performance over standard dimmers when
dimming CFLs and LEDs.
CFL and LED loads are quantified in Watts (W).
Lutron offers dimmers designed specifically
for dimmable CFL and LED lighting loads.
See Diva® (pg. 86), Skylark ContourTM (pg. 100)
and Credenza® (pg. 138) families for
available models.
For a complete list of approved bulbs visit our
web site, www.lutron.com/dimcflled.
www.lutron.com | 1.800.523.9466 |
11A
Product information for basic devices and single-space systems
Product families are organized
by wallplate opening style.
Within each family section are:
Color options
Specification features
Lighting load type compatibility
Model numbers
Coordinating accessories
New Architectural wallplate opening •
•
•
•
Architectural wallplate opening
•
Customize solutions that
are right for you.
Designer wallplate opening
Traditional wallplate opening
www.lutron.com | 1.800.523.9466 |
12
Product family sections by wallplate opening style
New Architectural product families
pg. 14
•
Exclusive New Architectural style opening with squared edges
•
Coordinates with New Architectural wallplates and Architectural accessories
•
Single-gang wallplate included with control
Architectural product families
pg. 20
•
Architectural style opening with squared edges
•
Coordinates with Architectural wallplates and Architectural accessories
•
Single-gang wallplate included with control
Designer product families
pg. 46
•
Designer style opening with rounded edges to match Designer style controls
•
Coordinates with Claro®/Satin Colors® wallplates and accessories
•
Controls fit standard Designer opening wallplates
•
Wallplates available separately
Traditional product families
pg. 114
•
Traditional style opening with rounded edges to match standard toggle switches
•
Coordinates with Fassada® style wallplates and Claro/Satin Colors accessories
•
Wallplates available separately
www.lutron.com | 1.800.523.9466 |
13
Abella dimmers and switches
®
2.86 in (73 mm)
Product family features
True multi-location dimming from every location
•
Light fades on/off to preset level
•
Delayed off provides light as you exit the room
•
Line frequency compensation maintains stable
light levels, despite power line frequency and
voltage variations
•
LEDs indicate light level and glow softly in the dark as a locator light
•
4.60 in (117 mm)
Traditional
wallplate opening
Advanced programming allows customized functions
•
100% factory tested
•
Coordinating Fassada® and Stainless Steel
wallplates only available separately
•
Custom engraving available for wallplates,
see pg. 155
•
Control types
.23 in
(5.8 mm)
profile
Single-pole (one location)
Multi-location (up to ten locations)
Direct load type compatibility
Shown actual size: Abella dimmer and
1-gang Fassada wallplate in White (WH).
Incandescent/halogen lighting
Magnetic low-voltage lighting
Lighting load interfaces are not compatible
with this family.
www.lutron.com | 1.800.523.9466 |
114
Traditional
wallplate opening
Abella dimmers and switches
®
Available finishes
Use BOLD color code in model number (Example: AB-600M-LA)
Gloss finishes*
WH
White
LA
Light Almond
AL
Almond
IV
Ivory
BL
Black
SS
Stainless Steel
*Coordinating wallplates only available separately. For wallplate information, see pg. 166.
Stainless Steel wallplate includes black plastic trim/adapter, visible from side. Match with separate
Black (BL) controls.
www.lutron.com | 1.800.523.9466 |
115
Traditional
wallplate opening
Abella dimmers and switches
®
Dimmers and companion dimmers
Switches and companion switches
Digital fade dimmers
Digital switches
Press on to favorite level;
press off
•
Press twice for full on
•
Large, easy-to-use, one-touch
button turns light on/off
•
LED indicates on/off
•
Press, hold and release for
gradual fade-to-off
•
Touch buttons to adjust light level
•
Advanced programming
options available
•
Companion dimmers
For use with multi-location
dimmers only—use up to nine
companion dimmers with one
Abella multi-location dimmer
•
Provides true dimming from
every location
•
Companion switches
Large, easy-to-use, one-touch
button turns light on/off
•
For use with multi-location
switches only—use up to nine
companion switches with one
Abella® multi-location switch
•
Advanced programming features include:
Adjusting fade on/fade off time.
•
Locked preset lighting level.
•
Abella advanced programming manual (Application Note #212) is available, visit
www.lutron.com/applicationnotes.
www.lutron.com | 1.800.523.9466 |
116
Traditional
wallplate opening
Abella dimmers and switches
®
Connections overview
Load connections*
Incandescent/
Halogen
Magnetic
Low-Voltage
Switched
Lighting/Fans
MLV
Transformer
(by others)
Incandescent/
Halogen
Dimmer
MLV
Dimmer
Switch
Control types (for 2 or more locations)
Dim from multiple-locations (up to 10)
Switch from multiple-locations (up to 10)
Light
Source
Light
Source
MultiLocation
Dimmer
Up to 9 Companion
Dimmers
MultiLocation
Switch
Up to 9 Companion
Switches
*For illustration purposes only. Consult model number pages for specific voltage and
capacity information.
www.lutron.com | 1.800.523.9466 |
117
Traditional
wallplate opening
Abella dimmers and switches
®
Dimmer model numbers
Switch and companion control
model numbers
Incandescent/halogen dimmers**
Switches
Digital fade dimmers
Digital switch*
Multi-location/single-pole
120 V 600 W
Multi-location/single-pole
120 V 1000 W
AB-600M-CC3
Multi-location/single-pole
120 V 6 A light 3 A fan
AB-1000M-CC3
Rated for: incandescent/halogen, magnetic
low-voltage, electronic low-voltage, non-dim
fluorescent ballasts, general purpose fans and
most non-dim LED drivers.
Magnetic low-voltage dimmers**
Digital fade dimmers
Multi-location/single-pole
120 V 600 VA (450 W)
Multi-location/single-pole
120 V 1000 VA (800 W)
ABLV-600M-CC3
AB-S6AM-CC3
Companion controls
Companion dimmer
ABLV-1000M-CC3
120 V No derating required if ganged.
The stated VA (Volt-Ampere) rating includes
the magnetic transformer heat losses and the
lamp load. The stated W (Watt) rating is the
maximum lamp wattage based on assumed
20% transformer loss.
Companion switch
120 V www.lutron.com | 1.800.523.9466 |
AB-AS-CC3
No derating required if ganged.
CC3:Gloss color codes, see pg. 115
(Wallplates not included, order separately,
see pg. 168)
AB-AD-CC3
All models must be derated if ganged unless
otherwise noted, see pg. 170.
*Requires neutral wire connection.
**Minimum load is 40 W/VA.
118
Abella dimmers and switches
®
Accessories
Wallplates
4.67 in (119 mm)
Shown actual size:
2-gang Fassada®
wallplate in White (WH).
For more information
about Traditional wallplates,
see pg. 166.
4.60 in (117 mm)
Traditional
wallplate opening
.23 in
(5.8 mm)
profile
Coordinated electrical devices
For more information
about coordinated
Designer electrical
devices, see pg. 163.
Tamper resistant
GFCI receptacle
Customizable
6-port frame
www.lutron.com | 1.800.523.9466 |
Cable jack
119
Ceana dimmers
®
2.86 in (73 mm)
Product family features
Distinctive design enhances any décor
•
Large, curved button is easy to use
•
Button and slider glow—easy to find in the dark
•
The locator light is best visible on the lighter colors
•
100% factory tested
•
Coordinating Fassada and Stainless Steel
wallplates only available separately
•
4.60 in (117 mm)
Traditional
wallplate opening
Custom engraving available for wallplates,
see pg. 155
•
Control types
Single-pole (one location)
3-way or 4-way (two or more locations)
Direct load type compatibility
.23 in
(5.8 mm)
profile
Incandescent/halogen lighting
Magnetic low-voltage lighting
Lighting load interfaces are not compatible
with this family.
Shown actual size: Ceana dimmer and
1-gang Fassada wallplate in White (WH).
www.lutron.com | 1.800.523.9466 |
120
Traditional
wallplate opening
Ceana dimmers
®
Available finishes
Use BOLD color code in model number (Example: CN-600P-AL)
Gloss finishes*
WH
White
LA
Light Almond
AL
Almond
IV
Ivory
BL
Black
SS
Stainless Steel
Dimmers and switches
Dimmers
Push button turns lights
on/off
•
Move slider up to brighten;
down to dim
•
Includes locator light
•
*Coordinating wallplates only available separately. For wallplate information, see pg. 166.
Stainless Steel wallplate includes black plastic trim/adapter, visible from side. Match with separate
Black (BL) controls.
www.lutron.com | 1.800.523.9466 |
121
Traditional
wallplate opening
Ceana dimmers
®
Connections overview
Load connections*
Dimmer and switch model numbers
Incandescent/halogen dimmers
Preset dimmers
Incandescent/
Halogen
Magnetic
Low-Voltage
MLV
Transformer
(by others)
Single-pole
120 V 600 W
Single-pole
120 V 1000 W
CN-600P-CC3
3-way
120 V 600 W
3-way
120 V 1000 W
CN-603P-CC3
CN-10P-CC3
CN-103P-CC3
Magnetic low-voltage dimmers
Preset dimmers
Incandescent/
Halogen
Dimmer
MLV
Dimmer
Control types (for 2 or more locations)
Dim from one location, switch from others
Light
Source
3-way
Dimmer
3-way
Switch
Light
Source
3-way
Dimmer
4-way
Switch
(1 or more)
Single-pole
120 V 600 VA (450 W)
CNLV-600P-CC3
3-way
120 V 600 VA (450 W)
CNLV-603P-CC3
The stated VA (Volt-Ampere) rating includes
the magnetic transformer heat losses and the
lamp load. The stated W (Watt) rating is the
maximum lamp wattage based on assumed
20% transformer loss.
3-way
Switch
CC3:Gloss color codes, see pg. 121
(Wallplates not included, order separately,
see pg. 168)
*For illustration purposes only. Consult
model number pages for specific voltage
and capacity information.
www.lutron.com | 1.800.523.9466 |
All models must be derated if ganged unless
otherwise noted, see pg. 170.
122
Ceana dimmers
®
Accessories
Wallplates
4.67 in (119 mm)
Shown actual size:
2-gang Fassada®
wallplate in White (WH).
For more information
about Traditional wallplates,
see pg. 166.
4.60 in (117 mm)
Traditional
wallplate opening
.23 in
(5.8 mm)
profile
Coordinated electrical devices
For more information
about coordinated
Designer electrical
devices, see pg. 163.
Tamper resistant
GFCI receptacle
Customizable
6-port frame
www.lutron.com | 1.800.523.9466 |
Cable jack
123
Ariadni dimmers and fan controls
®
2.86 in (73 mm)
Product family features
Matches existing switches
•
Toggle-style switch turns light on to level
set by slider
•
Slide adjusts light to your favorite level
•
eco-dim® model available
•
1000 W preset dimmers have voltage compensation
which maintains stable light levels, despite line
voltage variations
•
4.60 in (117 mm)
Traditional
wallplate opening
100% factory tested
•
Coordinating Fassada® and Stainless Steel
wallplates only available separately
•
Custom engraving available for wallplates,
see pg. 155
•
Control types
.23 in
(5.8 mm)
profile
Single-pole (one location)
3-way or 4-way (two or more locations)
Direct load type compatibility
Shown actual size: Ariadni dimmer and
1-gang Fassada wallplate in White (WH).
Incandescent/halogen lighting
Magnetic low-voltage lighting
Fluorescent lighting
LED lighting
Ceiling fans
Ceiling fan/lights
Load type requiring load interface
Electronic low-voltage lighting
Neon/cold cathode lighting
Lighting load interfaces may be applicable
for some additional load type, voltage and
capacity combinations.
For additional information, see pg. 174.
www.lutron.com | 1.800.523.9466 |
124
Traditional
wallplate opening
Ariadni dimmers and fan controls
®
Available finishes
Use BOLD color code in model number (Example: AY-600P-BL)
Gloss finishes*
WH
White
LA
Light Almond
AL
Almond
IV
Ivory
BR
Brown
BL
Black
SS
Stainless Steel
*Coordinating wallplates only available separately. For wallplate information, see pg. 166.
Stainless Steel wallplate includes black plastic trim/adapter, visible from side. Match with separate
Black (BL) controls.
www.lutron.com | 1.800.523.9466 |
125
Traditional
wallplate opening
Ariadni dimmers and fan controls
®
Dimmers
Fan and fan/light controls
Dimmers
Fan controls
Toggle turns on/off
•
Slide up to brighten;
down to dim
•
eco-dim® model guarantees at
least 15% energy savings
compared to a standard switch
•
Toggle turns fan on/off
•
Slide up to increase speed;
down to decrease
•
3-quiet fan speeds for
increased comfort
•
For use with only one
ceiling paddle fan
•
Quiet 3-speed designed to
prevent motor hum
•
Dimmers with locator light
Toggle turns lights on/off
•
Slide up to brighten;
down to dim
•
Includes amber locator light
Fan/light controls
Fan control (left)
•
Not available in black
Slide up to on/increase fan
speed; down to decrease
fan speed/off
•
•
3-quiet fan speeds for
increased comfort
•
For use with only one ceiling
paddle fan
•
Quiet 3-speed designed to
prevent motor hum
•
Dimmer (right)
Toggle turns light on/off
•
Slide up to brighten;
down to dim
•
www.lutron.com | 1.800.523.9466 |
126
Traditional
wallplate opening
Ariadni dimmers and fan controls
®
Connections overview
Load connections*
Incandescent/
Halogen
Magnetic
Low-Voltage
MLV
Transformer
(by others)
eco-dim®
Dimmer
Incandescent/
Halogen
Dimmer
MLV
Dimmer
Fluorescent
Lighting
Lutron ®
Dimming
Ballasts
Fluorescent
Dimmer
LED
Ceiling
Fan
Ceiling
Fan/Light
Lutron Hi-lume ®
LED Driver
Fluorescent
Dimmer
(3-wire only)
Fan
Control
Fan/
Light
Control
Control types (for 2 or more locations)
Dim from one location, switch from the others
Light
Source
3-way
Dimmer
3-way
Switch
Light
Source
3-way
Dimmer
4-way
Switch
(1 or more)
3-way
Switch
For more information on ballasts, visit www.lutron.com/ballasts.
For more information on LED drivers, visit www.lutron.com/LED.
*For illustration purposes only. Consult model number pages for specific voltage and
capacity information.
www.lutron.com | 1.800.523.9466 |
127
Traditional
wallplate opening
Ariadni dimmers and fan controls
®
Dimmer model numbers
Dimmer, fan and fan/light control
model numbers
Incandescent/halogen dimmers
3-wire fluorescent dimmers*
Preset dimmers
Preset dimmers
Single-pole
120 V 600 W
Single-pole
120 V 1000 W
AY-600P-CC
3-way
120 V 600 W
3-way
120 V 1000 W
AY-603P-CC3
For use with Hi-lume®, Hi-lume® Compact SE,
Hi-lume® 3D, Eco-10®, EcoSystem® ballasts.
AY-103P-CC3
Also compatible with Hi-lume® LED driver.
3-way/single-pole
120 V 8 A
3-way/single-pole
277 V 6 A
3
AY-10P-CC3
AYF-103P-CC3
AYF-103P-277-CC3
No derating required if ganged.
Adjustable low-end trim.
Preset dimmers with locator light
Single-pole
120 V 600 W
Single-pole
1000 W
AY-600PNL-CC3
3-way
120 V 600 W
3-way
120 V 1000 W
AY-603PNL-CC3
AY-10PNL-CC3
AY-103PNL-CC3
Hi-lume® LED drivers:
3-wire fluorescent dimmers*
Preset dimmers
3-way/single-pole
120 V 8 A
3-way/single-pole
277 V 6 A
AYF-103P-CC3
AYF-103P-277-CC3
For use with Hi-lume LED driver only.
eco-dim® preset dimmer
3-way/single-pole
120 V 600 W
AY-603PG-EE2
eco-dim model guarantees at least 15% energy
savings compared to a standard switch.
Magnetic low-voltage dimmers
Preset dimmers
For more information on Hi-lume LED drivers,
visit www.lutron.com/HilumeLED.
No derating required if ganged.
Adjustable low-end trim.
Fan control
Fan control—quiet 3-speed
Single-pole
120 V 600 VA (450 W)
AYLV-600P-CC3
3-way/single-pole
120 V 1.5 A
3-way
120 V 600 VA (450 W)
AYLV-603P-CC3
Fan/light control
The stated VA (Volt-Ampere) rating includes
the magnetic transformer heat losses and the
lamp load. The stated W (Watt) rating is the
maximum lamp wattage based on assumed
20% transformer loss.
CC3:Gloss color codes, see pg. 125
EE2:Available in White (WH), Ivory (IV), Almond
(AL) and Light Almond (LA)
(Wallplates not included, order separately,
see pg. 168)
www.lutron.com | 1.800.523.9466 |
AYFSQ-F-CC3
Fan control and dimmer—quiet 3-speed
Single-pole fan control
AY2-LFSQ-CC3
120 V 1.5 A (left)
Single-pole dimmer 120 V 300 W
incandescent/halogen (right)
All models must be derated if ganged unless
otherwise noted, see pg. 170.
For more information on ballasts, visit
www.lutron.com/ballasts.
*Requires neutral wire connection.
128
Ariadni dimmers and fan controls
®
Accessories
Wallplates
4.67 in (119 mm)
Shown actual size:
2-gang Fassada®
wallplate in White (WH).
For more information
about Traditional wallplates,
see pg. 166.
4.60 in (117 mm)
Traditional
wallplate opening
.23 in
(5.8 mm)
profile
Coordinated electrical devices
For more information
about coordinated
Designer electrical
devices, see pg. 163.
Tamper resistant
GFCI receptacle
Customizable
6-port frame
www.lutron.com | 1.800.523.9466 |
Cable jack
129
Glyder dimmers and fan controls
®
2.86 in (73 mm)
Product family features
Slide adjusts light to your desired level
•
100% factory tested
•
Coordinating Fassada® wallplates
only available separately
•
Custom engraving available for wallplates,
see pg. 155
•
4.60 in (117 mm)
Traditional
wallplate opening
Control types
Single-pole (one location)
3-way or 4-way (two or more locations)
Direct load type compatibility
Incandescent/halogen lighting
Magnetic low-voltage lighting
.23 in
(5.8 mm)
profile
Ceiling fans
Lighting load interfaces are not compatible
with this family.
Shown actual size: Glyder dimmer and
1-gang Fassada wallplate in White (WH).
www.lutron.com | 1.800.523.9466 |
130
Traditional
wallplate opening
Glyder dimmers and fan controls
®
Available finishes
Use BOLD color code in model number (Example: GL-600P-IV)
Gloss finishes*
WH
White
IV
Ivory
Dimmers and fan controls
Dimmers with on/off switch
Slide-to-off fan controls
Button turns on/off
•
Slide up to brighten;
down to dim
•
•
Slide up to on/increase speed;
down to decrease/off
•
For use with multiple ceiling
paddle fans or exhaust fans
Slide-to-off dimmers
Slide up to on/brighten;
down to dim/off
•
*Coordinating wallplates only available separately. For wallplate information, see pg. 166.
www.lutron.com | 1.800.523.9466 |
131
Traditional
wallplate opening
Glyder dimmers and fan controls
®
Connections overview
Dimmer, fan control and replacement knob
model numbers
Incandescent/halogen dimmers
Load connections*
Dimmers with on/off switch
Incandescent/
Halogen
Magnetic
Low-Voltage
Ceiling
Fan
MLV
Transformer
(by others)
Single-pole
120 V 600 W
Single-pole
120V 1000 W
GL-600P-CC3
3-way
120 V 600 W
3-way
120 V 1000 W
GL-603P-CC3
Fan
Control
MLV
Dimmer
GL-1000-CC3
Slide-to-off dimmer
Control types (for 2 or more locations)
Dim from one location, switch from the others
3-way
Dimmer
GL-600-CC3
Magnetic low-voltage dimmers
Single-pole
120 V 600 VA (450 W)
Light
Source
GL-103P-CC3
Slide-to-off dimmers
Single-pole
120 V 600 W
Single-pole
120 V 1000 W
Incandescent/
Halogen
Dimmer
GL-10P-CC3
3-way
Switch
GLV-600-CC3
The stated VA (Volt-Ampere) rating includes
the magnetic transformer heat losses and the
lamp load. The stated W (Watt) rating is the
maximum lamp wattage based on assumed
20% transformer loss.
Fan control
Slide-to-off fan control—fully variable
Single-pole fan control
120 V 5 A
Light
Source
3-way
Dimmer
4-way
Switch
(1 or more)
3-way
Switch
GFS-5E-CC3
Knobs
Slide-to-off
Preset
GK-CC3
GKP-CC3
CC3:Gloss White (WH) and Ivory (IV), see pg. 131
(Wallplates not included, order separately,
see pg. 168)
*For illustration purposes only. Consult
model number pages for specific voltage
and capacity information.
www.lutron.com | 1.800.523.9466 |
All models must be derated if ganged unless
otherwise noted, see pg. 170.
132
Glyder dimmers and fan controls
®
Accessories
Wallplates
4.67 in (119 mm)
Shown actual size:
2-gang Fassada®
wallplate in White (WH).
For more information
about Traditional wallplates,
see pg. 166.
4.60 in (117 mm)
Traditional
wallplate opening
.23 in
(5.8 mm)
profile
Coordinated electrical devices
For more information
about coordinated
Designer electrical
devices, see pg. 163.
Tamper resistant
GFCI receptacle
Customizable
6-port frame
www.lutron.com | 1.800.523.9466 |
Cable jack
133
Rotary dimmers and fan controls
2.86 in (73 mm)
Product family features
The original electronic dimmer—
first patented in 1959
•
Easy-turn knob adjusts light to your
favorite level
•
eco-dim® model available
•
100% factory tested
•
Coordinating Fassada® and Stainless Steel
wallplates only available separately
•
4.60 in (117 mm)
Traditional
wallplate opening
Custom engraving available for wallplates,
see pg. 155
•
Control types
.23 in
(5.8 mm)
profile
Single-pole (one location)
3-way or 4-way (two or more locations)
Direct load type compatibility
Incandescent/halogen lighting
Ceiling fans
Lighting load interfaces are not compatible
with this family.
Shown actual size: Rotary dimmer and
1-gang Fassada wallplate in White (WH).
www.lutron.com | 1.800.523.9466 |
134
Traditional
wallplate opening
Rotary dimmers and fan controls
Available finishes
Use BOLD color code in model number (Example: D-600P-IV)
Gloss finishes*
WH
White
IV
Ivory
Dimmers and fan controls
Dimmer with rotate on/off knob
Rotate on/off; rotate to adjust
light level
•
Dimmers with push on/off knob
and locator light
Push on/off; rotate to adjust
light level
•
Includes locator light
•
Dimmers with push on/off knob
Push on/off; rotate to adjust
light level
•
eco-dim® model guarantees
at least 15% energy savings
compared to a standard switch
•
Fan controls with rotate on/off knob
Rotate on/off; rotate to
adjust fan speed
•
Quiet 3-speed available for
use with one paddle fan
•
Quiet 3-speed designed to
prevent motor hum
•
Fully variable available for
use with multiple paddle or
exhaust fans
•
*Coordinating wallplates only available separately. For wallplate information, see pg. 166.
www.lutron.com | 1.800.523.9466 |
135
Traditional
wallplate opening
Rotary dimmers and fan controls
Connections overview
Dimmer, fan control and replacement knob
model numbers
Load connections*
Incandescent/halogen dimmers
Dimmers with push on/off knob
Incandescent/
Halogen
Ceiling
Fan
Single-pole
120 V 600 W
D-600P-CC3
3-way
120 V 600 W
D-603P-CC3
Dimmers with push on/off knob and locator light
Single-pole
120 V 600 W
DNG-600P-CC3
3-way
120 V 600 W
DNG-603P-CC3
Dimmer with rotate on/off knob
eco-dim® Incandescent/
Dimmer Halogen
Dimmer
Single-pole
120 V 600 W
Fan
Control
D-600R-CC3
eco-dim® dimmer with push on/off knob
3-way/single-pole
120 V 600 W
Control types (for 2 or more locations)
Dim from one location, switch from the others
D-603PG-CC3
eco-dim model guarantees at least 15% energy
savings compared to a standard switch.
Fan controls
Light
Source
Light
Source
3-way
Dimmer
3-way
Dimmer
Fan controls with rotate on/off knob—
fully variable
3-way
Switch
4-way
Switch
(1 or more)
3-way
Switch
Single-pole fan control
factory set minimum speed
120 V 5 A
Single-pole fan control
user adjustable minimum speed
120 V 5 A
FS-5F-CC3
FS-5E-CC3
Fan control with rotate on/off knob—
quiet 3-speed
CC3:Gloss White (WH) and Ivory (IV),
see pg. 135
(Wallplates not included, order
separately, see pg. 168)
*For illustration purposes only. Consult
model number pages for specific voltage
and capacity information.
www.lutron.com | 1.800.523.9466 |
Single-pole
120 V 1.5 A
FSQ-2F-CC3
Knobs
Standard knob
3-speed fan control knob, White
3-speed fan control knob, Ivory
RK-CC3
280-324-01
280-324-06
136
Rotary dimmers and fan controls
Accessories
Wallplates
4.67 in (119 mm)
Shown actual size:
2-gang Fassada®
wallplate in White (WH).
For more information
about Traditional wallplates,
see pg. 166.
4.60 in (117 mm)
Traditional
wallplate opening
.23 in
(5.8 mm)
profile
Coordinated electrical devices
For more information
about coordinated
Designer electrical
devices, see pg. 163.
Tamper resistant
GFCI receptacle
Customizable
6-port frame
www.lutron.com | 1.800.523.9466 |
Cable jack
137
®
4.67 in (119 mm)
Shown actual size:
Abella dimmers in a
2-gang Fassada
wallplate in White (WH).
4.60 in (117 mm)
Wallplates and accessories | Traditional | Fassada
.23 in
(5.8 mm)
profile
Product family features
Can be used in conjunction with the following
dimmer(s) and switch(es): Abella®, Ceana®,
Ariadni®, Glyder® and Rotary
•
All Lutron wallplates are screwless, seamless and
have no visible hardware; the front plate securely
snaps into the alignment adapter plate
Ganging and derating
Traditional wallplates use standard ganging
•
Requires fins to be removed from dimmers for
proper spacing (“Fins Broken” ganging),
see pg. 170
•
•
Traditional wallplates can be paired with
designer accessories to complete the look of
any room
•
May require derating (i.e., reduction of dimmer
capacity due to fin removal), see Derating
Tables, pg. 172
•
Customize your traditional wallplate with
engraving, contact customer service to get
started at 1.888.LUTRON1
•
www.lutron.com | 1.800.523.9466 |
166
Wallplates and accessories | Traditional | Fassada
®
Available finishes
Use BOLD color code in model number (Example: FG-1-AL)
Gloss finishes
WH
White
LA
Light Almond
AL
Almond
IV
Ivory
BL
Black
Metal finishes
SS
Stainless Steel*
*Stainless Steel finish wallplates include black plastic trim/adapter, visible from side. Match with separate
Black (BL) controls.
www.lutron.com | 1.800.523.9466 |
167
Wallplates and accessories | Traditional | Fassada
®
Wallplates for Abella®, Ceana®, Ariadni®,
Glyder® and Rotary
1-gang
Stainless Steel*
W: 2.86 in (73 mm); H: 4.60 in (117 mm);
D: .23 in (5.8 mm)
2-gang
Stainless Steel*
W: 4.67 in (119 mm); H: 4.60 in (117 mm);
D: .23 in (5.8 mm)
FG-1-CC3
FW-1-SS
FG-2-CC3
FW-2-SS
Combination opening
3-gang
Stainless Steel*
W: 6.48 in (165 mm); H: 4.60 in (117 mm);
D: .23 in (5.8 mm)
FG-3-CC3
FW-3-SS
Multiple devices with line and low-voltage can
be mounted behind a common wallplate using
a standard barrier backbox, see Application
Note #213 (Combining Low-Voltage and Line
Voltage Wiring Devices in a Multi-Gang Box) at
www.lutron.com/applicationnotes.
Controls must have heat-sink fins broken for
multi-gang installations. Removing this metal
reduces the amount of heat that the control can
dissipate, thus reducing the wattage capacity of
the control. Please derate dimmers and switches
as required.
Multi-gang dimmer installations may require
derating, see pg. 170.
Rotate the wallplate for
small/large or large/small
opening applications.
2-gang (1 traditional, FG-2-TD-CC3
1 designer opening)
Stainless Steel*
FW-2-TD-SS
W: 4.67 in (119 mm); H: 4.60 in (117 mm);
D: .23 in (5.8 mm)
CC3:Gloss color codes, see pg. 167
www.lutron.com | 1.800.523.9466 |
Controls must have heat-sink fins broken for
multi-gang installations.
Multi-gang dimmer installations may require
derating, see pg. 170.
*Stainless Steel wallplates include black plastic
trim/adapter, visible from side. Match with
separate Black (BL) controls.
168
Appendix | Mounting
Mounting requirements for dimmers, switches, sensors and accessories
Individual devices
Individual dimmers, switches, wall sensors and
accessories typically mount in standard 1-gang
electrical boxes (fig. A).
Standard ganging
Multiple dimmers, switches, wall sensors and
accessories typically mount in standard multi-gang
electrical backboxes (fig. B–D) under standard
multi-gang wallplates. Some devices may require
derating or reduction in maximum capacity. For more
information on standard ganging, see pg. 170.
A1-gang box
(W: 2 in x H: 3 in x D: 2.5 in)
B2-gang box
(W: 4 in x H: 3 in x D: 2.5 in)
C3-gang box
(W: 6 in x H: 3 in x D: 2.5 in)
D4-gang box
(W: 8 in x H: 3 in x D: 2.5 in)
Custom Architectural ganging
Architectural dimmers, switches and accessories
may be ganged without derating (fig. E), but
wider-than-standard electrical backboxes and
customized wallplates may be required. For more
information on custom Architectural ganging,
see pg. 170.
Light load power interfaces (pg. 178)
Interfaces typically mount to a standard electrical
junction box (fig. F); must be mounted within 7
degrees of vertical. Maximum output: 5.1 in x 6.3 in.
Interfaces project 1.2 in in front of box.
Ceiling/wall mount sensors (pgs. 144 and 146)
Wireless ceiling mount Radio Powr SavrTM sensors
(fig. G) mount to brackets provided with sensor using
adhesive strips or mounting hardware provided.
www.lutron.com | 1.800.523.9466 |
E(2) 1-gang boxes
with 3/4 in spacer
FJunction box
(W: 4 in x H: 4 in x D: 2.5 in)
GWireless sensor
mounting bracket
(3.2 in diameter footprint,
mounting brackets are
spaced 1.8 in)
169
Appendix
| Multi-ganging
derating
Appendix
| Ganging andand
derating
How to understand ganging and derating
Standard ganging
Ganging is the side-by-side mounting of two
or more dimmers or accessory devices under
a multi-gang wallplate.
Standard multi-gang installation:
•
Uses standard multi-gang electrical backboxes
•
Uses standard multi-gang wallplates
•
•
Requires fins to be removed from dimmers for
proper spacing (“Fins Broken” ganging)
May require derating (i.e., reduction of dimmer
capacity due to fin removal), see Derating
Tables, pgs. 172–173
Custom ganging for Architectural
style controls
For Architectural style dimmers and switches,
it is possible to retain the maximum capacity of
dimmers in multi-gang applications via custom
architectural multi-gang:
•
•
•
•
•
May require customized, wider-thanstandard wallplates
May require wider-than-standard
electrical backboxes
Allows full capacity (“No Fins Broken”) ganging
Required for Nova® dimmers and for larger width
(high capacity) architectural controls
Visit www.lutron.com/customganging for
additional information
Standard ganging for dimmers, switches and accessories
New Architectural
Architectural
Designer
Traditional
pg. 148
pg. 152
pg. 160
pg. 166
Vierti®
Vareo®
Nova Tb®
Maestro®
Maestro IR®
Maestro Wireless®
Spacer System®
Diva®
Lyneo® Lx
Skylark®
Skylark ContourTM
Abella®
Ceana®
Ariadni®
Glyder®
Rotary
Derating Table 1
pg. 172
Derating Table 2
pg. 173
Derating Table 1
pg. 172
Derating Table 1
pg. 172
www.lutron.com | 1.800.523.9466 |
170
Appendix | Ganging and derating
Standard ganging and fins broken derating examples:
=
+
No fins broken
Full capacity
One Nova Tb®
dimmer
=
Standard 1-gang
backbox
+
=
Three Nova Tb dimmers
“Fins Broken” ganging
Standard 1-gang
architectural wallplate
+
Standard 2-gang
backbox
One fin broken*
Partial derating
Two Nova Tb dimmers
“Fins Broken” ganging
+
+
Standard 2-gang
architectural wallplate
+
Standard 3-gang
backbox
Inside: Two fins broken*
Full derating
Standard 3-gang
architectural wallplate
Outside: One fin broken*
Partial derating
Custom Architectural ganging example:
=
Two Nova Tb dimmers
“No Fins Broken” ganging
+
+
No fins broken
Full capacity
Backbox with
chase nipple
Custom architectural
wallplate
For further information on ganging and derating, visit www.lutron.com/multigang.
*The fins are scored and designed to be removed easily.
www.lutron.com | 1.800.523.9466 |
171
Appendix
| Multi-ganging
derating
Appendix
| Ganging andand
derating
Derating Table 1
New Architectural | Vierti®
Designer | Maestro®, Maestro IR®, Maestro Wireless®, Spacer System®, Diva®, Lyneo® Lx, Skylark ContourTM, Skylark®
Traditional | Abella®, Ceana®, Ariadni®, Glyder®, Rotary
No fins broken
1 fin broken
2 fins broken
600 W
500 W
400 W
1000 W
800 W
650 W
300 W
250 W
200 W
300 W
250 W
200 W
600 VA / 450 W
500 VA / 400 W
400 VA / 300 W
1000 VA / 800 W
800 VA / 650 W
650 VA / 500 W
300 W
250 W
200 W
500 W
600 W
450 W
500 W
400 W
400 W
Incandescent
Dimmers
Dual dimmers
Magnetic low-voltage
Dimmers
Electronic low-voltage
Dimmers
Fluorescent
Hi-lume®/Hi-lume® Compact SE/Eco-10®/EcoSystem®
Vierti
60 ballasts / 6 A
50 ballasts / 5 A
35 ballasts / 3.5 A
Maestro /Spacer System
20 ballasts / 6 A
20 ballasts / 5 A
20 ballasts / 3.5 A
no derating
no derating
no derating
5 A
4 A
3.3 A
Quiet 7-speed
1.0 A / 300 W
1.0 A / 300 W
1.0 A / 300 W
Quiet 3-speed
1.5 A
1.5 A
1.5 A
5 A
4 A
3 A
Quiet 7-speed
1.0 A / 300 W
1.0 A / 300 W
1.0 A / 300 W
Quiet 3-speed
1.5 A / 300 W
1.5 A / 300 W
1.5 A / 300 W
1.5 A / 360 W
1.5 A / 360 W
1.5 A / 360 W
2.5 A / 300 W
2.1 A / 250 W
1.7 A / 200 W
Vierti
6 A / 3 A
5 A / 3 A
3.5 A / 3 A
Maestro (light/fan)
8 A / 3 A
6.5 A / 3 A
5 A / 3 A
Abella (light/fan)
6 A / 3 A
5 A / 3 A
3.5 A / 3 A
Diva, Skylark, Lyneo Lx and Ariadni
Tu-Wire®: Spacer System, Diva, Skylark
Fan controls
Fully variable
Fan/light controls
Fully variable
Electronic switches
www.lutron.com | 1.800.523.9466 |
172
Appendix
and derating
Appendix| |Multi-ganging
Ganging and derating
Derating Table 2
Architectural | Vareo®, Nova Tb®
No fins broken
1 fin broken
2 fins broken
600 W
500 W
300 W
1000 W
900 W
700 W
1500 W
1250 W
1000 W
1950 W
–
–
600 VA / 450 W
500 VA / 400 W
300 VA / 250 W
1000 VA / 800 W
900 VA / 750 W
700 VA / 500 W
1500 VA / 1200 W
1250 VA / 1000 W
1000 VA / 800 W
300 W
300 W
250 W
600 W
500 W
400 W
20 ballasts / 8 A
20 ballasts / 6 A
20 ballasts / 4.5 A
6 A
no derating
no derating
8 A
no derating
no derating
16 A
no derating
no derating
30 mA ballasts
no derating
no derating
5 A
4 A
3.3 A
1.5 A
no derating
no derating
Fully variable
6 A
4.2 A
2.5 A
Fully variable
12 A
10 A
8.3 A
VETS-1000-
1000 W
800 W
650 W
VETS-1000-SL-
1000 W
900 W
700 W
VETN-1000-
1000 VA
700 VA
550 VA
Incandescent
Dimmers
Magnetic low-voltage
Dimmers
Electronic low-voltage
Dimmers
Fluorescent
Hi-lume®/Hi-lume® Compact SE/Eco-10®/EcoSystem®
Vareo
Nova Tb
0-10 VDC control1
Tu-Wire®
Fan controls
Quiet 3-speed
Electronic tapswitches2
For further information on ganging Nova®, visit www.lutron.com/customganging.
PowerPack required for line voltage switching.
VETS-R-Auxiliary electronic tapswitches do not require derating.
1
2
www.lutron.com | 1.800.523.9466 |
173
Appendix | Lighting load interfaces
Dimmer capabilities and
interface requirements
ulti-location—true dimming from each location
M
E eco-model available
Compatible dimmer (no interface)
WBX TVI 3F PA Requires interface, see notes below
M
Dimmers
Vierti®*
pg. 14
capacity†
Incandescent/halogen 120 V Magnetic low-voltage 120 V
Vareo®
pg. 20
Nova Tb® Nova®
pg. 34
pg. 26
Centurion®
pg. 42
M
600 W
M
1000 W
M
1500 W
WBX
2000 W
WBX
600 VA (450 W)
1000 VA (800 W)
1500 VA (1200 W)
WBX
2000 VA (1600 W)
WBX
600 VA (450 W)
WBX
WBX
1000 VA (800 W)
WBX
WBX
300 W
WBX
450 W
WBX
600 W
WBX
16 A
WBX
WBX
WBX
WBX
Magnetic low-voltage 277 V
Electronic low-voltage 120 V
Electronic low-voltage 277 V
Neon/cold cathode
WBX
WBX
WBX
WBX
3-wire ballasts and Hi-lume® LED driver 120 V 6 A
Hi-lume, Hi-lume Compact SE,
8 A
Eco-10® and EcoSystem® ballasts
16 A
3F
3-wire ballasts and Hi-lume LED driver 277 V 6 A
3F
Hi-lume, Hi-lume Compact SE,
8 A
3F
16 A
3F
5 A
PA
Eco-10 and EcoSystem ballasts
Tu-Wire® ballasts 120 V
0-10 VDC (ballasts or LED Drivers) 120/277 V
WBX: Wallbox Phase Adaptive Power Module
(PHPM-WBX-DV-WH)
3F: Fluorescent Power Module
(PHPM-3F-DV-WH)
16 A
TVI
3F
3F
TVI
T VI: 0-10 V Interface
(GRX-TVI)
PA: Phase Adaptive Power Module
(PHPM-PA-DV-WH)
See pgs. 178–179 for specific compatible dimmer models and switching interface solutions.
*Consult Lutron Technical Support for information on interfaces with Vierti.
†
UL listed for FULL wattage indicated (derate capacity only if ganged with other devices).
www.lutron.com | 1.800.523.9466 |
174
Appendix | Lighting load interfaces
Dimmer capabilities and
interface requirements
ulti-location—true dimming from each location
M
E eco-model available
Compatible dimmer (no interface)
WBX TVI 3F PA Requires interface, see notes below
M
Dimmers
Maestro® Maestro Maestro Spacer
pg. 46
IR® pg. 60 Wireless® System®
pg. 68
pg. 76
capacity†
M
600 W
E
Incandescent/halogen 120 V M
M
Diva®
pg. 86
M
E
1000 W
1500 W
WBX
WBX
WBX
WBX
2000 W
WBX
WBX
WBX
WBX
1500 VA (1200 W)
WBX
WBX
WBX
WBX
2000 VA (1600 W)
WBX
WBX
WBX
WBX
600 VA (450 W)
WBX
WBX
WBX
WBX
1000 VA (800 W)
WBX
WBX
WBX
WBX
Magnetic low-voltage 120 V
600 VA (450 W)
1000 VA (800 W)
Magnetic low-voltage 277 V
Electronic low-voltage 120 V
Electronic low-voltage 277 V
300 W
WBX
450 W
WBX
WBX
600 W
WBX
WBX
16 A
WBX
Neon/cold cathode
WBX
WBX
WBX
WBX
WBX
3-wire ballasts and Hi-lume® LED driver 120 V 6 A
Hi-lume, Hi-lume Compact SE,
Eco-10® and EcoSystem® ballasts
8 A
3F
3F
3F
16 A
3F
3F
3F
3F
8 A
3F
3F
3F
3F
16 A
3F
3F
3F
3F
5 A
PA
PA
16 A
TVI
TVI
TVI
TVI
3-wire ballasts and Hi-lume LED driver 277 V 6 A
Hi-lume, Hi-lume Compact SE,
Eco-10 and EcoSystem ballasts
Tu-Wire® ballasts 120 V
0-10 VDC (ballasts or LED Drivers) 120/277 V
WBX: Wallbox Phase Adaptive Power Module
(PHPM-WBX-DV-WH)
3F: Fluorescent Power Module
(PHPM-3F-DV-WH)
T VI: 0-10 V Interface
(GRX-TVI)
PA: Phase Adaptive Power Module
(PHPM-PA-DV-WH)
See pgs. 178–179 for specific compatible dimmer models and switching interface solutions.
†
UL listed for FULL wattage indicated (derate capacity only if ganged with other devices).
www.lutron.com | 1.800.523.9466 |
175
Appendix | Lighting load interfaces
Dimmer capabilities and
interface requirements
ulti-location—true dimming from each location
M
E eco-model available
Compatible dimmer (no interface)
WBX TVI 3F PA Requires interface, see notes below
M
Dimmers
Lyneo® Lx Skylark
pg. 94
ContourTM
pg.100
Skylark®
pg. 104
Abella®
pg. 114
capacity†
Incandescent/halogen 120 V M
600 W
E
E
1000 W
Magnetic low-voltage 120 V
1500 W
WBX
WBX
2000 W
WBX
WBX
600 VA (450 W)
1000 VA (800 W)
WBX
1500 VA (1200 W)
WBX
WBX
2000 VA (1600 W)
WBX
WBX
600 VA (450 W)
WBX
WBX
1000 VA (800 W)
WBX
WBX
Magnetic low-voltage 277 V
Electronic low-voltage 120 V
Electronic low-voltage 277 V
300 W
450 W
WBX
600 W
WBX
16 A
Neon/cold cathode
WBX
WBX
WBX
WBX
3F
3F
3-wire ballasts and Hi-lume® LED driver 120 V 6 A
Hi-lume, Hi-lume Compact SE,
Eco-10® and EcoSystem® ballasts
8 A
16 A
3-wire ballasts and Hi-lume LED driver 277 V 6 A
Hi-lume, Hi-lume Compact SE,
8 A
3F
3F
Eco-10 and EcoSystem ballasts
16 A
3F
3F
5 A
PA
16 A
TVI
Tu-Wire® ballasts 120 V
0-10 VDC (ballasts or LED Drivers) 120/277 V
WBX: Wallbox Phase Adaptive Power Module
(PHPM-WBX-DV-WH)
3F: Fluorescent Power Module
(PHPM-3F-DV-WH)
TVI
TVI: 0-10 V Interface
(GRX-TVI)
PA: Phase Adaptive Power Module
(PHPM-PA-DV-WH)
See pgs. 178–179 for specific compatible dimmer models and switching interface solutions.
†
UL listed for FULL wattage indicated (derate capacity only if ganged with other devices).
www.lutron.com | 1.800.523.9466 |
176
Appendix | Lighting load interfaces
Dimmer capabilities and
interface requirements
ulti-location—true dimming from each location
M
E eco-model available
Compatible dimmer (no interface)
WBX TVI 3F PA Requires interface, see notes below
M
Dimmers
Ceana®
pg. 120
Ariadni®
pg. 124
Glyder®
pg. 130
Rotary
pg. 134
capacity†
Incandescent/halogen 120 V 600 W
E
E
1000 W
Magnetic low-voltage 120 V
1500 W
WBX
2000 W
WBX
600 VA (450 W)
1000 VA (800 W)
1500 VA (1200 W)
WBX
2000 VA (1600 W)
WBX
600 VA (450 W)
WBX
1000 VA (800 W)
WBX
300 W
WBX
450 W
WBX
600 W
WBX
16 A
WBX
Magnetic low-voltage 277 V
Electronic low-voltage 120 V
Electronic low-voltage 277 V
Neon/cold cathode
WBX
3-wire ballasts and Hi-lume® LED driver 120 V 6 A
Hi-lume, Hi-lume Compact SE,
8 A
Eco-10® and EcoSystem® ballasts
16 A
3F
3-wire ballasts and Hi-lume LED driver 277 V 6 A
Hi-lume, Hi-lume Compact SE,
Eco-10 and EcoSystem ballasts
Tu-Wire® ballasts 120 V
0-10 VDC (ballasts or LED Drivers) 120/277 V
WBX: Wallbox Phase Adaptive Power Module
(PHPM-WBX-DV-WH)
3F: Fluorescent Power Module
(PHPM-3F-DV-WH)
8 A
3F
16 A
3F
5 A
PA
16 A
TVI
TVI: 0-10 V Interface
(GRX-TVI)
PA: Phase Adaptive Power Module
(PHPM-PA-DV-WH)
See pgs. 178–179 for specific compatible dimmer models and switching interface solutions.
†
UL listed for FULL wattage indicated (derate capacity only if ganged with other devices).
www.lutron.com | 1.800.523.9466 |
177
Appendix | Lighting load interfaces
Dimmer models/load interface compatibility
Incandescent, magnetic
and electronic
low-voltage (120/277 V)
3-wire Fluorescent
ballasts or Hi-lume®
LED drivers (120/277 V)
0-10 VDC Ballasts
or LED drivers
(120/277 V)
WBX
3F
TVI
Wallbox Phase Adaptive
Power Module*
Fluorescent
Power Module*
0-10 V
Interface
PHPM-WBX-DV-WH
PHPM-3F-DV-WH
GRX-TVI
Dimmer
Family
Singlepole
3-way or
multi-location
Singlepole
3-way or
multi-location
Singlepole
3-way or
multi-location
Abella®
–
–
–
–
–
–
Ariadni®
–
AYF-103P-
–
AYF-103P-
–
AYF-103P-
Ceana®
–
–
–
–
–
–
–
DVF-103P-
–
DVF-103P-
–
DVF-103P-
–
DVSCF103P-
–
DVSCF103P-
–
DVSCF103P-
Glyder®
–
–
–
–
–
–
Lyneo® Lx
–
LXF-103PL-
–
LXF-103PL-
–
LXF-103PL-
Diva®
Gloss
Diva
Satin Colors®
Maestro®
Gloss
Maestro®
Satin Colors®
Maestro
Wireless®
–
MAF-6AM-
–
MAF-6AM-
–
MAF-6AM-
–
MSCF-6AM-
–
MSCF-6AM-
–
MSCF-6AM-
–
MRF2F6AN-DV-
–
MRF2F6AN-DV-
–
MRF2F6AN-DV-
Nova®
NF-10-
NF-103P-
NF-10-
NF-103P-
NF-10-
NF-103P-
Nova Tb®
NTF-10-
NTF-103P-
NTF-10-
NTF-103P-
NTF-10-
NTF-103P-
Skylark®
SF-10P-
SF-103P-
SF-10P-
SF-103P-
SF-10P-
SF-103P-
Spacer
System®
–
SPSF-6AM-
–
SPSF-6AM-
SPSF-S6A-
SPSF-6AM-
Vareo®
–
VF-10-
–
VF-10-
–
VF-10-
contact Lutron
–
VTF-6AM-
Vierti®
contact Lutron
Use only dimmer model numbers listed.
*Dual 120/277 V model given,120 V only versions are also available.
Please see Technical notes, pg. 179.
www.lutron.com | 1.800.523.9466 |
178
Appendix | Lighting load interfaces
Dimmer models/load interface compatibility
Tu-Wire® Fluorescent
Ballasts (120 V)
Switched Lighting
(120/277 V)
PA
SW
Phase Adaptive
Power Module*
Switching
Power Module*
PHPM-PA-DV-WH
PHPM-SW-DV-WH
Dimmer
Family
Singlepole
3-way or
multi-location
Singlepole
3-way or
multi-location
Abella®
–
–
–
AB-S6AM-
Ariadni®
–
AYF-103P-
–
–
Ceana®
–
–
–
–
–
DVF-103P-
–
–
–
DVSCF-103P-
–
–
Glyder®
–
–
–
–
Lyneo® Lx
–
LXF-103PL-
LX-1PSL-
LX-3PSL-
Diva®
Gloss
Diva
Satin Colors®
Technical notes
Maestro®
Gloss
Maestro®
Satin Colors®
Maestro
Wireless®
–
MAF-6AM-
–
MA-S8AM-
–
MSCF-6AM-
–
MSC-S8AM-
–
MRF2F6AN-DV-
–
MRF2-6ANS-
Nova®
NF-10-
NF-103P-
–
–
Nova Tb®
NTF-10-
NTF-103P-
–
–
Skylark®
SF-10P-
SF-103P-
–
–
Spacer
System®
SPSFS6A-
SPSF-6AM-
SPSFS6A-
SPSF-S6AM-
Vareo®
–
VF-10-
–
VETN-1000-
Vierti®
contact Lutron
contact Lutron
Lighting load interfaces
must be matched to
load type and voltage
•
•
•
•
•
•
All load interfaces
for dimmed load
are controlled by
a 120 V 3-wire
fluorescent dimmer
Power feed to dimmer
may differ from lighting
load/interface voltage
Interfaces typically require
additional power feeds
For wiring information,
consult wiring diagrams,
see pgs. 193-195
For assistance and
additional solutions,
consult Lutron
Technical Support
at 1.800.523.9466
(24 hours/7 days)
Interface mounting
PHPM interfaces mount
to 2-gang electrical
backbox (W: 6.30 in x
H: 5.10 in)
•
•
GRX-TVI enclosure is
surface mount only (W:
6.10 in x H: 12.50 in x
D: 3.30 in)
Use only dimmer model numbers listed.
*Dual 120/277 V model given,120 V only versions are also available.
Please see Technical notes, pg. 179.
www.lutron.com | 1.800.523.9466 |
179
Appendix | Wiring diagrams
Wiring diagrams are for reference. The most up-to-date information is supplied with product installation sheets.
Wiring diagram #1
Single-pole wiring................................................. 182
Wiring diagram #2
Single-pole wiring of 3-way controls..................... 182
Wiring diagram #3
Single-pole wiring with neutral
wire connection.................................................... 182
Wiring diagram #4
Single-pole wiring of a 3-way control with
neutral wire connection......................................... 182
Wiring diagram #5
3-way wiring with neutral
wire connection.................................................... 182
Wiring diagram #6
3-way wiring......................................................... 183
Wiring diagram #7
4-way wiring......................................................... 183
Wiring diagram #8
Single-location wiring of
multi-location control............................................ 184
Wiring diagram #9
Line side multi-location wiring............................... 184
Wiring diagram #10
Load side multi-location wiring.............................. 184
www.lutron.com | 1.800.523.9466 |
Wiring diagram #11
Single-pole wiring of multi-location
control with neutral wire connection...................... 185
Wiring diagram #12
Line side multi-location wiring with
neutral wire connection......................................... 185
Wiring diagram #13
Multi-location switch wiring with
neutral wire connection......................................... 185
Wiring diagram #14
Vareo® switch wiring with
neutral wire connection......................................... 186
Wiring diagram #15
Nova Tb® Omnislide wiring................................... 186
Wiring diagram #16
AC motor wiring of double-pole,
double-throw switch............................................. 187
Wiring diagram #17
Single-pole wiring, fan control............................... 187
Wiring diagram #18
Single-pole wiring, fan and light control................. 187
Wiring diagram #19
Single-pole wiring, dual light control...................... 187
Wiring diagram #20
Single-pole wiring, dual fan/light control................ 187
180
Appendix | Wiring diagrams
Wiring diagram #21
Spacer System® wall-mounted master
control wiring with dimmers.................................. 188
Wiring diagram #31
Single-pole wiring of multi-location
3-wire fluorescent control..................................... 191
Wiring diagram #22
Spacer System® master control wiring
with IR blaster (remotely mounted)........................ 188
Wiring diagram #32
Multi-location wiring of
3-wire fluorescent control..................................... 192
Wiring diagram #23
Cable jack wiring.................................................. 189
Wiring diagram #38
Single-pole wiring of 0-10 V
fluorescent control and a PP-277H....................... 192
Wiring diagram #24
Telephone jack wiring, 6-conductor...................... 189
Wiring diagram #25
Telephone jack wiring, 8-conductor...................... 189
Wiring diagram #26
Receptacle wiring................................................. 189
Wiring diagram #27
GFCI receptacle wiring......................................... 189
Wiring diagram #28
Single-pole wiring of 3-way,
3-wire fluorescent control..................................... 190
Wiring diagram #39
PHPM-WBX-DV-WH with any Lutron®
3-wire fluorescent control wiring........................... 193
Wiring diagram #40
PHPM-SW-DV-WH with any
Lutron switch........................................................ 193
Wiring diagram #41
PHPM-3F-DV-WH with any Lutron
3-wire fluorescent control wiring........................... 194
Wiring diagram #42
GRX-TVI with any Lutron
3-wire fluorescent control wiring........................... 195
Wiring diagram #29
3-way wiring of 3-wire
fluorescent control................................................ 190
Wiring diagram #30
Single-pole wiring of 3-wire
fluorescent control................................................ 191
www.lutron.com | 1.800.523.9466 |
181
Appendix | Wiring diagrams
Wiring diagram #2
Single-pole wiring of 3-way control
Wiring diagram #1
Single-pole wiring
Dimmer, Switch,
Fan Control
Black*
Black or Red *
Hot
120 VAC
60 Hz Feed
Dimmer, Switch,
Fan Control
Hot
Red**(†)
Lighting
Load or Fan
Green **
Red**
Black *
120 VAC
60 Hz Feed
Green ***
Neutral
Neutral
* or Brass screw terminal
** or Green screw terminal
* or Copper/Black screw terminal
** or Brass/Gold screw terminal
***or Green screw terminal
Lighting
Load or Fan
† or Silver screw terminal
Wiring diagram #3
Single-pole wiring with neutral wire connection
Hot
Wiring diagram #4
Single-pole wiring of 3-way control with
neutral wire connection
Dimmer, Switch
Black
Red or Yellow
120 VAC
60 Hz Feed
Green
Dimmer
Hot
Yellow *
Red**†
Lighting
Load
White
Red**
120 VAC
60 Hz Feed
Green
White††
Lighting
Load
Neutral
Neutral
*or Copper/Black screw terminal
**or Brass/Gold screw terminal
† or Red/White stripe (cap off)
††or Silver screw terminal
Wiring diagram #5
3-way wiring with neutral wire connection
Control
Load Side
Hot
3-Way
Switch
**
*
120 VAC
60 Hz Feed
* or Copper/Black screw terminal
** or Brass/Gold screw terminal
Dimmer
*
Red **
Red **
Yellow*
† or Red/White stripe (cap off)
†† or Silver screw terminal
†
Green
White††
Lighting
Load
Neutral
www.lutron.com | 1.800.523.9466 |
182
Appendix | Wiring diagrams
Wiring diagram #6
3-way wiring
Control
Line Side
Hot
Dimmer, Switch,
Fan Control
Red *
Black **
Red *†
120 VAC
60 Hz Feed
Control
Load Side
3-Way
Switch
*
Hot
**
**
*
Green ***
OR
***
120 VAC
60 Hz Feed
Lighting
Load
or Fan
*
Dimmer, Switch,
Fan Control
Red *
Black **
*
Red *†
3-Way
Switch
***
Green ***
Lighting
Load
or Fan
Neutral
Neutral
* or Brass/Gold screw terminal
** or Copper/Black screw terminal
*** or Green screw terminal
† or Red/White screw terminal
Wiring diagram #7
4-way wiring
Control
Line Side
Dimmer, Switch,
Fan Control
Red *
Hot Black **
Red *†
120 VAC
60 Hz Feed
4-Way
Switch
3-Way
Switch
*
**
*
*
**
*
Green ***
**
Lighting
Load or
Fan
***
Neutral
OR
Control
Load Side
Hot
3-Way
Switch
**
4-Way
Switch
*
*
**
Dimmer, Switch,
Fan Control
Red *
Black **
*
*
**
Red *†
120 VAC
60 Hz Feed
Green ***
Lighting
Load or
Fan
Neutral
* or Copper/Black screw terminal
** or Brass/Gold screw terminal
***or Green screw terminal
† or Red/White stripe
www.lutron.com | 1.800.523.9466 |
183
Appendix | Wiring diagrams
Wiring diagram #8
Single-location wiring of multi-location control
Hot
Dimmer,
Tapswitch
Black*
Red**
* or Copper/Black screw terminal
** or Brass/Gold screw terminal
Blue†
120 VAC
60 Hz Feed
Cap
Off
Green
† or Blue stripe
Lighting
Load
Neutral
Wiring Diagram #9
Line side multi-location wiring
Control
Line Side
Hot
Dimmer
Control
Black*
120 VAC Green
60 Hz Feed
Companion
Companion
Companion
Red**
Red** Black*
Red** Black*
Red** Black*
Blue†
Green
Neutral
Blue†
Green
Blue†
Green
Blue†
Lighting
Load
Up to Nine Total Companion Dimmers
* or Copper/Black screw terminal
** or Brass/Gold screw terminal
Control: Dimmer, Smart Dimmer, Tapswitch
Accessory: Accessory Dimmer, Auxiliary Tapswitch
† or Blue stripe
Wiring diagram #10
Load side multi-location wiring
Control
Load Side
Hot
Companion
Companion
Black*
Black* Red**
120 VAC Green
60 Hz Feed
Blue†
Green
Neutral
Blue†
Dimmer
Control
Companion
Red**
Black* Red**
Black*
Green
Blue†
Green
Blue†
Lighting
Load
Up to Nine Total Companion Dimmers
* or Copper/Black screw terminal
** or Brass/Gold screw terminal
† or Blue stripe
www.lutron.com | 1.800.523.9466 |
Control: Dimmer, Smart Dimmer, Tapswitch
Accessory: Accessory Dimmer, Auxiliary Tapswitch
184
Appendix | Wiring diagrams
Wiring diagram #11
Single-pole wiring of multi-location control with neutral wire connection
Control
Hot
Black*
Red**
Blue†
120/277 VAC
60 Hz Feed
Green
White††
Cap
Off
Lighting
Load or Fan
* or Copper/Black screw terminal
** or Brass/Gold screw terminal
† or Blue screw terminal
††or Silver screw terminal
Neutral
Control: Dimmer, Smart Dimmer, Electronic Switch, Tapswitch
Wiring diagram #12
Line side multi-location wiring with neutral wire connection
Control
Line Side
Hot
Tapswitch
Red**
Black*
Blue†
120 VAC Green
60 Hz Feed
Auxiliary
Tapswitch
Red**
Black*
Blue†
Green
*or Copper/Black screw terminal
** or Brass/Gold screw terminal
Lighting
Load
† or Blue screw terminal
†† or Silver screw terminal
White††
Neutral
Up to Nine Total Auxiliary Tapswitches
Wiring diagram #13
Multi-location switch wiring with neutral wire connection
Control
Load Side
Hot
Companion
Black*
Red**
120/277 VAC
60 Hz Feed
Blue†
Neutral
Green
Companion
Black*
Red**
Blue†
Green
Companion
Red**
Black*
Blue†
Green
Switch
Control
Black*
Green
Blue†
Red or Yellow
White††
Lighting
Load or Fan
Up to Nine Total Companions
Control: Dimmer, Smart Dimmer, Electronic Switch, Tapswitch
Accessory: Accessory Dimmer, Accessory Switch, Auxiliary Tapswitch
www.lutron.com | 1.800.523.9466 |
* or Copper/Black screw terminal
** or Brass/Gold screw terminal
† or Blue screw terminal
†† or Silver screw terminal
185
Appendix | Wiring diagrams
Wiring diagram #14
Vareo® switch wiring with neutral wire connection
Control
Line Side
Hot
Black
VETS-1000-SL
VETS-A-SL
Red
Black
Red
Blue
120 VAC
60 Hz Feed
Green
White
Orange
VETS-A-SL
Black
Red
Orange
Blue
Green
Blue
Lighting
Load or Fan
Green
Neutral
Up to Four Total VETS-A-SL Units
Control
Load Side
OR
Hot
VETS-A-SL
Black
Red
Orange
Blue
120 VAC
60 Hz Feed
Green
Neutral
Red
VETS-A-SL
Black
Blue
Red
Orange
VETS-1000-SL
Black
Blue
Green
Green
Lighting
Load or Fan
White
Up to Four Total VETS-A-SL Units
Wiring diagram #15
Nova Tb® OmnislideTM wiring
Base Control
Line Side
Hot
120 VAC
60 Hz Feed
Base
Dimmer
Black
Green
Base Control
Load Side
Auxiliary
Dimmer
Red
Red
Blue
Orange
Black
Hot
Auxiliary
Dimmer
Black
Red
Base
Dimmer
Black
Red
Orange Blue
OR
Green
120 VAC
60 Hz Feed
Neutral
www.lutron.com | 1.800.523.9466 |
Green
Green
Lighting
Load
Lighting
Load
Neutral
186
Appendix | Wiring diagrams
Wiring diagram #16
AC motor wiring of double-pole, double throw switch
Rear View of
NT-DPDT-CO-MO-,
NT-DPDT-CO-MA-
Hot
Motor
Lower
120 VAC
60 Hz Feed
Raise
A1 A2
L1
L2
B1 B2
Hot
Motor
Lower
120 VAC
60 Hz Feed
Raise
Neutral
Neutral
Wiring diagram #17
Single-pole wiring, fan only control
Wiring diagram #18
Single-pole wiring, fan and light control
Fan
Control
Fan
Control
Hot
Black
120 VAC
60 Hz Feed
Hot
Red
Yellow (Cap off)*
Green
Black
120 VAC
60 Hz Feed
Fan
Red to Fan
Yellow to Light*
Green
Fan
Incandescent
Load
Neutral
Neutral
* Switched full voltage only
* Switched full voltage only
Wiring diagram #19
Single-pole wiring, control
Wiring diagram #20
Single-pole wiring, dual fan/light control
Hot
Dual
Control
Dual Light
Control
Black*
Red**
Hot
Lighting
Load
Yellow**
120 VAC
60 Hz Feed
Green
Lighting
Load
Neutral
120 VAC
60 Hz Feed
Black
Yellow to Fan
Red to Light
Green
Incandescent
Load
Fan
Neutral
* or Black screw terminal
** or Brass/Gold screw terminal
www.lutron.com | 1.800.523.9466 |
187
Appendix | Wiring diagrams
Wiring diagram #21
Spacer System® wall-mounted master control wiring with dimmers
Hot
Master
Control
Black
120 VAC
60 Hz Feed
Neutral
Green
White
Rear View of Spacer System Dimmers
and SPS-5WC- Ganged Together
<<
>>>>>>>
SPS-5WC- emits signal
that travels up to 4 dimmers
in either direction.
Wiring diagram #22
Spacer System master control wiring with IR blaster (remotely mounted)
Spacer System Infrared Blaster
Wall-Mounted Master Control
Hot
Black
Master
Control
120 VAC
60 Hz Feed
Neutral
Red/White Stripe
Traveler
Red/White Stripe
Red/White Stripe
Traveler
Red/White Stripe
Rear View of 5 Spacer System
Dimmers Ganged Together
< < <
White
> > >
Spacer System
Dimmer
Green
Infrared Blaster emits signal
that travels up to 2 dimmers
in either direction.
Wallbox
Wallbox
Spacer System Infrared Blaster
(Optional)
Traveler
Red/White Stripe
Traveler
Red/White Stripe
Spacer System
Dimmer
Wallbox
www.lutron.com | 1.800.523.9466 |
188
Appendix | Wiring diagrams
Wiring diagram #23
Cable jack wiring
75-Ohm
Cable
Wiring diagram #24
Telephone jack wiring, 6 conductor
Jack
Position
1
2
3
4
6-Conductor
Telephone Jack* 5
6
75-Ohm
Cable
Cable
Jack
Wire
Color
White
Black
Red
Green
Yellow
Blue
*Accepts most 4-conductor jacks
Wiring diagram #25
Telephone jack wiring, 8 conductor
Jack
Position
1
2
3
4
8-Conductor
5
Telephone Jack*
6
7
8
Wiring diagram #26
Receptacle wiring
Receptacle
(15 A Shown)
Wire
Color
Blue
Orange
Black
Red
Green
Yellow
Brown
White
Hot
White
Black
Brass *
Screws
120 VAC
60 Hz Feed
Nickel
Plated
Screws
Green Screw
Building Ground
(to metal box) or
Isolated Ground
*Accepts most 4- or 6-conductor jacks
Neutral
*For split circuit wiring, break off tab on brass side only
Wiring diagram #27
GFCI receptacle wiring
Neutral
White
Receptacle
(15 A Shown)
Not Protected
120 VAC
60 Hz Feed
GFCI Receptacle
(15 A Shown)
Protected
Hot
Neutral
Load Hot
Green
Load Neutral
Green
Receptacle
(15 A Shown)
Protected
Brass
Screws
Green
Nickel
Plated
Screws
Black
Hot
www.lutron.com | 1.800.523.9466 |
189
Appendix | Wiring diagrams
Wiring diagram #28
Single-pole wiring of 3-way, 3-wire fluorescent control
Hot
Blue
Dimmer
120/277 VAC
60 Hz Feed
Red
Black
Yellow or Orange
White
Green
Dimming Ballast
Orange or Brown
Violet or Blue
Black
White
White
Dimming Ballast
Orange or Brown
Neutral
To Additional Ballasts
Wiring diagram #29
3-way wiring of 3-wire fluorescent control
Control
Load
Side
Hot
3-Way
Switch*
††
Dimmer
†
Blue
Red
White
†
120/277 VAC
60 Hz Feed
Green
Black
Violet
or Blue
Green
Yellow or
Orange
White
Orange or Brown
Dimming Ballast
Black
White
Neutral
Orange or Brown
Dimming Ballast
To Additional Ballasts
† or Copper/Black screw terminal
†† or Brass/Gold screw terminal
www.lutron.com | 1.800.523.9466 |
190
Appendix | Wiring diagrams
Wiring diagram #30
Single-pole wiring of 3-wire fluorescent control
Dimmer
Hot
Black*
Red**
Black
Yellow or Orange
Orange or Brown *
White††
120/277 VAC Green
60 Hz Feed
Dimming Ballast
White **
Black
* or Copper/Black screw terminal
** or Brass/Gold screw terminal
†† or Silver screw terminal
Orange or Brown *
Dimming Ballast
White **
Neutral
To Additional Ballasts
Wiring diagram #31
Single-pole wiring of multi-location 3-wire fluorescent control
Hot
Black*
Dimmer
Orange
Orange
Red**
Black
Blue†
Green
120/277 VAC
60 Hz Feed
White††
White
Dimming Ballast
Orange
Black
* or Copper/Black screw terminal
** or Brass/Gold screw terminal
† or Blue screw terminal
†† or Silver screw terminal
Dimming Ballast
White
Neutral
To Additional Ballasts
www.lutron.com | 1.800.523.9466 |
191
Appendix | Wiring diagrams
Wiring diagram #32
Multi-location wiring of 3-wire fluorescent control
Control
Load Side
Companion
Hot Black*
Companion
Red** Black*
Red** Black*
Blue†
Green
Dimmer
Blue†
Green
120/277 VAC
60 Hz Feed
Orange
Orange
Red**
Black
Dimming Ballast
White
Green
Blue†
Orange
Black
††
Dimming Ballast
White
White
Up to Nine Total Accessories
Neutral
To Additional Ballasts
Accessory: Accessory Dimmer, Auxiliary Tapswitch
* or Copper/Black screw terminal
** or Brass/Gold screw terminal
† or Blue screw terminal
†† or Silver screw terminal
Wiring diagram #38
Single-pole wiring of 0-10 V fluorescent control and a Power Pack (PP-277H shown)
Neutral
White
277 VAC
60 Hz Feed
Red
Black
Hot
White
Black (120 VAC) *
Red
Black
White
Lutron
PP-277 H
Red
Red
Blue
Blue
Violet (+)
Gray (-)
Black
Violet (+)
Class 2 Wiring
#20 AWG
0-10 V
Dimming Ballast
Gray (-)
White
Black (Cap off)
Black
Violet (+)
Gray (-)
0-10 V
Wall Control
To Additional Ballasts
(60 Maximum)
0-10 V
Dimming Ballast
0-10 V Control Signal Wires –
DO NOT CONNECT TO LINE VOLTAGE.
Lutron is not liable for damage due to miswiring.
* Wiring is similar for PP-120H, PP-230H, and PP-347H
For PP-20, contact Lutron Technical Support at 1.800.523.9466
www.lutron.com | 1.800.523.9466 |
192
Appendix | Wiring diagrams
Wiring diagram #39
Power interfaces with 3-wire fluorescent control wiring:
Incandescent/halogen/magnetic low-voltage/electronic low-voltage
Rear View of PHPM-WBX-DV-WH
120/277 VAC
60 Hz Feed
Hot
H/L
N
Neutral
Zone In
Orange
Control Neutral
DH
Red
Lighting
Loads
Wire single-pole,
3-way, or
multi-location
3-wire fluorescent
dimmer as normal
except run the
control wire to the
zone in terminal.
Hot
Hot
120 VAC
60 Hz Feed
From Distribution
Panel
Green
Neutral
Neutral
For neon/cold cathode loads, the B-wire dimmers low-end trim needs to be adjusted. Select a 3-wire dimmer that has an adjustable low-end trim.
*For Tu-Wire® loads replace PHPM-WBX-DV with a PHPM-PA-DW and wire the same
Wiring diagram #40
Switching power interface:
Incandescent/halogen, MLV, ELV, Magnetic and Electronic fluorescent ballasts, HID
Rear View of PHPM-SW-DV-WH
120/277 VAC
60 Hz Feed
Hot
H/L
N
SH
Neutral
Lighting
Loads
Zone In
Black
Control Neutral
Wire single-pole,
3-way, or
multi-location
switch as normal
except run the
control wire to the
zone in terminal.
Hot
Hot
120 VAC
60 Hz Feed
From Distribution
Panel
Green
Neutral
Neutral
*Also compatible with motor loads.
www.lutron.com | 1.800.523.9466 |
193
Appendix | Wiring diagrams
Wiring diagram #41
Fluorescent dimming ballast interface (PHPM-3F-DV-WH) with 3-wire fluorescent dimmer wiring
Rear View of PHPM-3F-DV-WH
120/277 VAC
60 Hz Feed
Hot
H/L
N
SH
DH
Neutral
Zone In
Orange
Control Neutral
Red
Wire single-pole,
3-way, or
multi-location
3-wire fluorescent
dimmer as normal
except run the
control wire to the
zone in terminal.
Hot
Hot
120 VAC
60 Hz Feed
From Distribution
Panel
Green
Neutral
Neutral
Black
White
Orange or Brown
Dimming Ballast
Black
White
Orange or Brown
Dimming Ballast
To Additional Ballasts
www.lutron.com | 1.800.523.9466 |
194
Appendix | Wiring diagrams
Wiring diagram #42
0-10 V power interface (GRX-TVI) with 3-wire fluorescent dimmer wiring:
0-10 V fluorescent ballast wiring shown
L2/H2 is the Hot/Live feed that powers
the internal circuitry of the GRX-TVI.
Use L2/H2 100-127 V~ only if your
line/mains voltage is 100-127 V~.
Hot
Hot
120 VAC
60 Hz Feed
From Distribution
Panel
Green
Wire single-pole,
3-way, or
multi-location
3-wire fluorescent
dimmer as normal
except run the
control wire to the
DL2/DH2 terminal.
L1/H1
100277V
N1
N1 SL1/SH1
0-10 V
+
–
0-10V
Max 0.3A
Load Switched
L2/H2
220-240 V~/CE
L2/H2 100-127 V~
N2
DL2/DH2
NEUTRAL
EARTH/GROUND
CONNECTIONS
0-10 V
N2 DL2/DH2
Control Inputs
L1/H1 100-277 V~
N1
N1
SL1/SH1
220- 100240V 127V
L2/H2
L1/H1
N1
N1
SL1/SH1
L2/H2 220-240 V~
L2/H2 100-120 V~
N2
DL2/DH2
GRX-TVI
Orange
Red
EARTH/GROUND
CONNNECTIONS
Neutral
To Additional
Ballasts
120/277 VAC
60 Hz Feed
From Distribution
Panel
Neutral
White
Black
Violet (+)
Gray (-)
Hot
White
Black
Violet (+)
Gray (-)
Neutral
0-10 V Control Signal Wires –
DO NOT CONNECT TO LINE VOLTAGE.
Lutron is not liable for damage due
to miswiring.
0-10 V
0-10 V
Dimming Ballast
Dimming Ballast
Some 0-10 V LED and fluorescent loads require low-end trim adjustments. Select a 3-wire dimmer that has an adjustable low-end trim.
*0-10 VDC sink control
www.lutron.com | 1.800.523.9466 |
195
Addendum | Advanced conceptual connections
Table of contents
Vierti®.................................................................... A1
Diva®................................................................... A28
Vareo®................................................................... A4
Lyneo Lx®........................................................... A32
Nova Ta®.............................................................. A7
Skylark ContourTM. ............................................ A35
Nova®.................................................................. A11
Skylark®.............................................................. A36
Centurion®.......................................................... A14
Abella®................................................................ A39
Maestro®. ........................................................... A15
Ceana®................................................................ A40
Maestro IR®........................................................ A20
Ariadni®. ............................................................. A41
Maestro Wireless®............................................. A21
Glyder®. .............................................................. A44
Spacer System®................................................. A25
Rotary................................................................. A45
www.lutron.com | 1.800.523.9466 |
A2
Addendum | Advanced conceptual connections
Vierti *
®
3-wire
fluorescent
dimming
0-10 V
fluorescent
dimming
Lamps:
Lamps:
Linear
Lamps:
Lamps:
U-Bent
Linear
Hi-lume®
3D Ballasts
Compact
Twin Tube
U-Bent
Linear
Compact
Twin Tube
Compact SETM
Ballasts
Hi-lume®
Ballasts
EcoSystem®
Ballasts
0-10 V
Ballasts
(by others)
Eco-10®
Ballasts
0-10 V
Interface
3-Wire
Fluorescent
Dimmer
3-Wire
Fluorescent
Dimmer
For illustration purposes only. Consult model number pages for specific voltage and
capacity information.
For ballast information, visit www.lutron.com/ballasts.
*Consult Lutron Technical Support for information on interfaces with Vierti.
www.lutron.com | 1.800.523.9466 |
A1
Addendum | Advanced conceptual connections
Vierti *
®
LED
dimming
Low Voltage
dimming
Low Voltage
LED Lighting
Hi-lume®
LED Driver
0-10 V LED
Drivers
(by others)
Magnetic
Low Voltage
Electronic
Low Voltage
MLV
Transformer
(by others)
ELV
Transformer
(by others)
0-10 V
Interface
3-Wire
Fluorescent
Dimmer
3-Wire
Fluorescent
Dimmer
Incandescent/
MLV Dimmer
ELV
Dimmer
For illustration purposes only. Consult model number pages for specific voltage and
capacity information.
For more information on LED drivers, visit www.lutron.com/LED.
*Consult Lutron Technical Support for information on interfaces with Vierti.
www.lutron.com | 1.800.523.9466 |
A2
Addendum | Advanced conceptual connections
Vierti *
®
Incandescent
dimming
Incandescent/
Halogen
Switched
loads
Switched
Fan
Non-Dim
Lighting
†
Switching
Module
Incandescent/
MLV Dimmer
Switch
Switch
For illustration purposes only. Consult model number pages for specific voltage and
capacity information.
*Consult Lutron Technical Support for information on interfaces with Vierti.
†
Interface provides additional capacity and/or may be different voltage than dimmer.
www.lutron.com | 1.800.523.9466 |
A3
Addendum | Advanced conceptual connections
Vareo
®
3-wire
fluorescent
dimming
2-wire
fluorescent
dimming
Lamps:
Lamps:
0-10 V
fluorescent
dimming
Lamps:
Linear
Lamps:
Lamps:
U-Bent
Linear
Hi-lume®
3D Ballasts
Compact
Twin Tube
U-Bent
Linear
Compact
Twin Tube
Tu-Wire®
Ballasts
0-10 V
Ballasts
(by others)
3-Wire
Interface
Phase
Adaptive
Power
Interface
0-10 V
Interface
3-Wire
Fluorescent
Dimmer
3-Wire
Fluorescent
Dimmer
3-Wire
Fluorescent
Dimmer
Compact SETM
Ballasts
Hi-lume®
Ballasts
EcoSystem®
Ballasts
Eco-10®
Ballasts
†
3-Wire
Fluorescent
Dimmer
Compact
U-Bent
Linear
For illustration purposes only. Consult model number pages for specific voltage and
capacity information.
For ballast information, visit www.lutron.com/ballasts.
†
Interface provides additional capacity and/or may be different voltage than dimmer.
www.lutron.com | 1.800.523.9466 |
A4
Addendum
Addendum
| Advanced
| Advanced
conceptual
conceptual
connections
connections
Vareo
®
LED
dimming
Low Voltage
dimming
Low Voltage
LED Lighting
0-10 V LED
Drivers
(by others)
Hi-lume®
LED Driver
Magnetic
Low Voltage
Electronic
Low Voltage
MLV
Transformer
(by others)
ELV
Transformer
(by others)
†
†
3-Wire
Fluorescent
Dimmer
3-Wire
Interface
0-10 V
Interface
3-Wire
Fluorescent
Dimmer
3-Wire
Fluorescent
Dimmer
Incandescent/
MLV Dimmer
Wallbox
Phase
Adaptive
Interface
Wallbox
Phase
Adaptive
Interface
3-Wire
Fluorescent
Dimmer
3-Wire
Fluorescent
Dimmer
For illustration purposes only. Consult model number pages for specific voltage and
capacity information.
For ballast information, visit www.lutron.com/ballasts.
†
Interface provides additional capacity and/or may be different voltage than dimmer.
www.lutron.com | 1.800.523.9466 |
A5
Addendum | Advanced conceptual connections
Vareo
®
Incandescent
dimming
Neon/cold
cathode
dimming
Incandescent/
Halogen
Neon/Cold
Cathode
Switched
loads
Non-Dim
Lighting
Switched
Fan
Switched
Motors
†
Incandescent/
MLV Dimmer
Wallbox
Phase
Adaptive
Interface
Wallbox
Phase
Adaptive
Interface
3-Wire
Fluorescent
Dimmer
3-Wire
Fluorescent
Dimmer
†
Switch
Switching
Module
Switching
Module
Switch
Switch
For illustration purposes only. Consult model number pages for specific voltage and
capacity information.
†
Interface provides additional capacity and/or may be different voltage than dimmer.
www.lutron.com | 1.800.523.9466 |
A6
Addendum | Advanced conceptual connections
Nova Tb
®
3-wire
fluorescent
dimming
0-10 V
fluorescent
dimming
2-wire
fluorescent
dimming
Lamps:
Lamps:
Lamps:
Linear
Lamps:
Lamps:
U-Bent
Linear
Hi-lume®
3D Ballasts
Compact
Twin Tube
U-Bent
Linear
Compact
Twin Tube
Compact SETM
Ballasts
Hi-lume®
Ballasts
EcoSystem®
Ballasts
Compact
U-Bent
Linear
0-10 V
Ballasts
(by others)
Tu-Wire®
Ballasts
Eco-10®
Ballasts
†
†
Phase
Adaptive
Power
Interface
3-Wire
Interface
3-Wire
Fluorescent
Dimmer
3-Wire
Fluorescent
Dimmer
Tu-Wire
Fluorescent
Dimmer
3-Wire
Fluorescent
Dimmer
††
Power
Pack
0-10 V
Dimmer
0-10 V
Interface
3-Wire
Fluorescent
Dimmer
For illustration purposes only. Consult model number pages for specific voltage and
capacity information.
For ballast information, visit www.lutron.com/ballasts.
Interface provides additional capacity and/or may be different voltage than dimmer.
PowerPack provides on/off switching to 0-10 V load.
†
††
www.lutron.com | 1.800.523.9466 |
A7
Addendum | Advanced conceptual connections
Nova Tb
®
LED
dimming
Low Voltage
dimming
Magnetic
Low Voltage
Low Voltage
LED Lighting
0-10 V LED
Drivers
(by others)
Hi-lume®
LED Driver
Electronic
Low Voltage
MLV
Transformer
(by others)
ELV
Transformer
(by others)
†
†
3-Wire
Interface
3-Wire
Fluorescent
Dimmer
3-Wire
Fluorescent
Dimmer
Wallbox
Phase
Adaptive
Interface
††
Power
Pack
0-10 V
Dimmer
0-10 V
Interface
3-Wire
Fluorescent
Dimmer
†
MLV
Dimmer
3-Wire
Fluorescent
Dimmer
Wallbox
Phase
Adaptive
Interface
ELV
Dimmer
3-Wire
Fluorescent
Dimmer
For illustration purposes only. Consult model number pages for specific voltage and
capacity information.
For more information on LED drivers, visit www.lutron.com/LED.
Interface provides additional capacity and/or may be different voltage than dimmer.
PowerPack provides on/off switching to 0-10 V load.
†
††
www.lutron.com | 1.800.523.9466 |
A8
Addendum | Advanced conceptual connections
Nova Tb
®
Incandescent
dimming
Neon/cold
cathode
dimming
Incandescent/
Halogen
Neon/Cold
Cathode
Switched
loads
Non-Dim
Lighting
Switched
Fan
Switched
Motors
†
Incandescent
Dimmer
Wallbox
Phase
Adaptive
Interface
Wallbox
Phase
Adaptive
Interface
3-Wire
Fluorescent
Dimmer
3-Wire
Fluorescent
Dimmer
†
Switching
Module
Switch
Switch
For illustration purposes only. Consult model number pages for specific voltage and
capacity information.
†
Interface provides additional capacity and/or may be different voltage than dimmer.
www.lutron.com | 1.800.523.9466 |
A9
Addendum | Advanced conceptual connections
Nova Tb
®
Ceiling
fan
Ceiling Fan
Fan
Control
For illustration purposes only. Consult model number pages for specific voltage and
capacity information.
www.lutron.com | 1.800.523.9466 |
A10
Addendum | Advanced conceptual connections
Nova
®
3-wire
fluorescent
dimming
2-wire
fluorescent
dimming
0-10 V
fluorescent
dimming
Lamps:
Lamps:
Lamps:
Linear
Lamps:
Lamps:
U-Bent
Linear
Hi-lume®
3D Ballasts
Compact
Twin Tube
U-Bent
Linear
Compact
Twin Tube
Compact SETM
Ballasts
Hi-lume®
Ballasts
EcoSystem®
Ballasts
Compact
U-Bent
Linear
0-10 V
Ballasts
(by others)
Tu-Wire®
Ballasts
Eco-10®
Ballasts
†
†
Phase
Adaptive
Power
Interface
3-Wire
Interface
3-Wire
Fluorescent
Dimmer
3-Wire
Fluorescent
Dimmer
Tu-Wire
Fluorescent
Dimmer
3-Wire
Fluorescent
Dimmer
††
Power
Pack
0-10 V
Dimmer
0-10 V
Interface
3-Wire
Fluorescent
Dimmer
For illustration purposes only. Consult model number pages for specific voltage and
capacity information.
For ballast information, visit www.lutron.com/ballasts.
Interface provides additional capacity and/or may be different voltage than dimmer.
PowerPack provides on/off switching to 0-10 V load.
†
††
www.lutron.com | 1.800.523.9466 |
A11
Addendum | Advanced conceptual connections
Nova
®
LED
dimming
Low Voltage
dimming
Magnetic
Low Voltage
Low Voltage
LED Lighting
0-10 V LED
Drivers
(by others)
Hi-lume®
LED Driver
Electronic
Low Voltage
ELV
Transformer
(by others)
MLV
Transformer
(by others)
†
†
3-Wire
Interface
3-Wire
Fluorescent
Dimmer
3-Wire
Fluorescent
Dimmer
Wallbox
Phase
Adaptive
Interface
††
Power
Pack
0-10 V
Dimmer
0-10 V
Interface
3-Wire
Fluorescent
Dimmer
MLV
Dimmer
3-Wire
Fluorescent
Dimmer
Wallbox
Phase
Adaptive
Interface
ELV
Dimmer
3-Wire
Fluorescent
Dimmer
For illustration purposes only. Consult model number pages for specific voltage and
capacity information.
For more information on LED drivers, visit www.lutron.com/LED.
Interface provides additional capacity and/or may be different voltage than dimmer.
PowerPack provides on/off switching to 0-10 V load.
†
††
www.lutron.com | 1.800.523.9466 |
A12
Addendum | Advanced conceptual connections
Nova
®
Incandescent
dimming
Neon/cold
cathode
dimming
Incandescent/
Halogen
Neon/Cold
Cathode
†
3-Wire
Fluorescent
Dimmer
Non-Dim
Lighting
Switched
Fan
Switched
Motors
Ceiling Fan
†
†
Wallbox
Phase
Adaptive
Interface
Wallbox
Phase
Adaptive
Interface
Incandescent
Dimmer
Ceiling
fan
Switched
loads
MLV
Dimmer
3-Wire
Fluorescent
Dimmer
Switching
Module
Switch
Switch
Fan
Control
For illustration purposes only. Consult model number pages for specific voltage and
capacity information.
†
Interface provides additional capacity and/or may be different voltage than dimmer.
www.lutron.com | 1.800.523.9466 |
A13
Addendum | Advanced conceptual connections
Centurion
®
Incandescent
dimming
Incandescent/
Halogen
Incandescent
Dimmer
For illustration purposes only. Consult model number pages for specific voltage and
capacity information.
www.lutron.com | 1.800.523.9466 |
A14
Addendum | Advanced conceptual connections
Maestro
®
3-wire
fluorescent
dimming
2-wire
fluorescent
dimming
0-10 V
fluorescent
dimming
Lamps:
Lamps:
Lamps:
Linear
Lamps:
Lamps:
U-Bent
Linear
Hi-lume®
3D Ballasts
Compact
Twin Tube
U-Bent
Linear
Compact
Twin Tube
Tu-Wire®
Ballasts
0-10 V
Ballasts
(by others)
3-Wire Fluorescent
Interface
Phase
Adaptive
Power
Interface
0-10 V
Interface
3-Wire
Fluorescent
Dimmer
3-Wire
Fluorescent
Dimmer
3-Wire
Fluorescent
Dimmer
Hi-lume®
Ballasts
EcoSystem®
Ballasts
Compact SETM
Ballasts
Eco-10®
Ballasts
†
3-Wire
Fluorescent
Dimmer
Compact
U-Bent
Linear
For illustration purposes only. Consult model number pages for specific voltage and
capacity information.
For more information on LED drivers, visit www.lutron.com/LED.
†
Interface provides additional capacity and/or may be different voltage than dimmer.
www.lutron.com | 1.800.523.9466 |
A15
Addendum | Advanced conceptual connections
Maestro
®
LED
dimming
Low Voltage
dimming
Low Voltage
LED Lighting
Magnetic
Low Voltage
Electronic
Low Voltage
MLV
Transformer
(by others)
ELV
Transformer
(by others)
**
0-10 V LED
Drivers
(by others)
Hi-lume®
LED Driver
†
†
†
3-Wire
Fluorescent
Dimmer
3-Wire
Fluorescent
Interface
0-10 V
Interface
3-Wire
Fluorescent
Dimmer
3-Wire
Fluorescent
Dimmer
Wallbox
Phase
Adaptive
Interface
Wallbox
Phase
Adaptive
Interface
MLV
Dimmer
3-Wire
Fluorescent
Dimmer
ELV
Dimmer
3-Wire
Fluorescent
Dimmer
For illustration purposes only. Consult model number pages for specific voltage and
capacity information.
For more information on LED drivers, visit www.lutron.com/LED.
**Consult www.lutron.com/LED for compatible 0-10 V LED drivers.
†
Interface provides additional capacity and/or may be different voltage than dimmer.
www.lutron.com | 1.800.523.9466 |
A16
Addendum | Advanced conceptual connections
Maestro
®
Incandescent
dimming
Incandescent/
Halogen
†
Wallbox
Phase
Adaptive
Interface
Incandescent/
Halogen
Dimmer
Incandescent/
Halogen
eco-dim®
Dimmer
Incandescent/
Halogen Dimmer
with Occupancy
Sensor
3-Wire
Fluorescent
Dimmer
For illustration purposes only. Consult model number pages for specific voltage and
capacity information.
†
Interface provides additional capacity and/or may be different voltage than dimmer.
www.lutron.com | 1.800.523.9466 |
A17
Addendum | Advanced conceptual connections
Maestro
®
Switched
loads
Ceiling
fan
Ceiling
fan/light
Ceiling Fan
Fan/Light
*
Switched
Fan
Non-Dim
Lighting
Switched
Motors
Fan
Canopy
Module
Fan
Canopy
Module
Quiet Fan
Control
Fan/Light
Control
†
Switch with
Occupancy
Sensor
Switch
Countdown
Timer
Switching
Module
Switching
Module
Switch
Switch
For illustration purposes only. Consult model number pages for specific voltage and
capacity information.
*Refer to pg. 54 for specific load type.
Interface provides additional capacity and/or may be different voltage than dimmer.
†
www.lutron.com | 1.800.523.9466 |
A18
Addendum | Advanced conceptual connections
Maestro
®
Incandescent
dimming
Incandescent
dimming
Switched
loads
Incandescent
dimming
*
Incandescent/
Halogen
Incandescent/
Halogen
Dual Dimmer
(2 loads)
Incandescent/
Halogen
Dimmer/
Switch
(2 loads)
Non-Dim
Lighting
Switched
Fan
Dimmer/
Timer Control
(2 loads)
For illustration purposes only. Consult model number pages for specific voltage and
capacity information.
*Refer to pg. 54 for specific load type.
www.lutron.com | 1.800.523.9466 |
A19
Addendum | Advanced conceptual connections
Maestro IR
®
Low Voltage
dimming
Magnetic
Low Voltage
Electronic
Low Voltage
MLV
Transformer
(by others)
ELV
Transformer
(by others)
MLV Dimmer
& IR Remote
Control
ELV Dimmer
& IR Remote
Control
Incandescent
dimming
Ceiling
fan
Ceiling
fan/light
Incandescent/
Halogen
Ceiling Fan
Fan/Light
Fan
Canopy
Module
Incandescent/
Halogen Dimmer
& IR Remote
Control
IR Quiet
Fan Control
& Fan only
IR Remote
Control
Fan
Canopy
Module
IR Fan/Light
Control &
IR Fan/Light
Remote
Control
For illustration purposes only. Consult model number pages for specific voltage and
capacity information.
www.lutron.com | 1.800.523.9466 |
A20
Addendum
Addendum
| Advanced
| Advanced
conceptual
conceptual
connections
connections
Maestro Wireless
®
3-wire
fluorescent
dimming
2-wire
fluorescent
dimming
0-10 V
fluorescent
dimming
Lamps:
Lamps:
Lamps:
Linear
Lamps:
Lamps:
U-Bent
Linear
Hi-lume®
3D Ballasts
Compact
Twin Tube
U-Bent
Linear
Compact
Twin Tube
Tu-Wire®
Ballasts
0-10 V
Ballasts
(by others)
3-Wire Fluorescent
Interface
Phase
Adaptive
Power
Interface
0-10 V
Interface
3-Wire
Fluorescent
Dimmer
3-Wire
Fluorescent
Dimmer
3-Wire
Fluorescent
Dimmer
Compact SETM
Ballasts
Hi-lume®
Ballasts
EcoSystem®
Ballasts
Eco-10®
Ballasts
†
3-Wire
Fluorescent
Dimmer
Compact
U-Bent
Linear
For illustration purposes only. Consult model number pages for specific voltage and
capacity information.
For ballast information, visit www.lutron.com/ballasts.
†
Interface provides additional capacity and/or may be different voltage than dimmer.
www.lutron.com | 1.800.523.9466 |
A21
Addendum | Advanced conceptual connections
Maestro Wireless
®
LED
dimming
Neon/cold
cathode
dimming
Low Voltage
LED Lighting
Neon/Cold
Cathode
**
0-10 V LED
Drivers
(by others)
Hi-lume®
LED Driver
†
3-Wire
Fluorescent
Dimmer
3-Wire
Fluorescent
Interface
0-10 V
Interface
Wallbox
Phase
Adaptive
Interface
3-Wire
Fluorescent
Dimmer
3-Wire
Fluorescent
Dimmer
3-Wire
Fluorescent
Dimmer
For illustration purposes only. Consult model number pages for specific voltage and
capacity information.
For more information on LED drivers, visit www.lutron.com/LED.
**Consult www.lutron.com/LED for compatible 0-10 V LED drivers.
†
Interface provides additional capacity and/or may be different voltage than dimmer.
www.lutron.com | 1.800.523.9466 |
A22
Addendum | Advanced conceptual connections
Maestro Wireless
®
Incandescent
dimming
Low Voltage
dimming
Magnetic
Low Voltage
Incandescent/
Halogen
†
†
Wallbox
Phase
Adaptive
Interface
Incandescent/
Halogen
Dimmer
Lamp
Dimmer
Incandescent/
Halogen
MLV Dimmer
3-Wire
Fluorescent
Dimmer
Wallbox
Phase
Adaptive
Interface
Incandescent/
Halogen
MLV Dimmer
3-Wire
Fluorescent
Dimmer
For illustration purposes only. Consult model number pages for specific voltage and
capacity information.
For more information on LED drivers, visit www.lutron.com/LED.
†
Interface provides additional capacity and/or may be different voltage than dimmer.
www.lutron.com | 1.800.523.9466 |
A23
Addendum | Advanced conceptual connections
Maestro Wireless
®
Switched
loads
*
Switched
Fan
Non-Dim
Lighting
Switched
Motors
†
Switch
Switching
Module
Switching
Module
Switch
Switch
For illustration purposes only. Consult model number pages for specific voltage and
capacity information.
For more information on LED drivers, visit www.lutron.com/LED.
*Refer to pg. 74 for specific load type.
Interface provides additional capacity and/or may be different voltage than dimmer.
†
www.lutron.com | 1.800.523.9466 |
A24
Addendum | Advanced conceptual connections
Spacer System
®
3-wire
fluorescent
dimming
2-wire
fluorescent
dimming
0-10 V
fluorescent
dimming
Lamps:
Lamps:
Lamps:
Linear
Lamps:
Lamps:
U-Bent
Linear
Hi-lume®
3D Ballasts
Compact
Twin Tube
U-Bent
Linear
Compact
Twin Tube
Compact SETM
Ballasts
Hi-lume®
Ballasts
EcoSystem®
Ballasts
Compact
U-Bent
Linear
0-10 V
Ballasts
(by others)
Tu-Wire®
Ballasts
Eco-10®
Ballasts
†
†
3-Wire Fluorescent
Interface
3-Wire
Fluorescent
Dimmer
3-Wire
Fluorescent
Dimmer
Tu-Wire
Dimmer
Phase
Adaptive
Power
Interface
0-10 V
Interface
3-Wire
Fluorescent
Dimmer
3-Wire
Fluorescent
Dimmer
For illustration purposes only. Consult model number pages for specific voltage and
capacity information.
For ballast information, visit www.lutron.com/ballasts.
†
Interface provides additional capacity and/or may be different voltage than dimmer.
www.lutron.com | 1.800.523.9466 |
A25
Addendum | Advanced conceptual connections
Spacer System
®
LED
dimming
Low Voltage
dimming
Low Voltage
LED Lighting
Magnetic
Low Voltage
Electronic
Low Voltage
MLV
Transformer
(by others)
ELV
Transformer
(by others)
**
0-10 V LED
Drivers
(by others)
Hi-lume®
LED Driver
†
†
†
3-Wire
Fluorescent
Dimmer
3-Wire
Fluorescent
Interface
0-10 V
Interface
3-Wire
Fluorescent
Dimmer
3-Wire
Fluorescent
Dimmer
Wallbox
Phase
Adaptive
Interface
Wallbox
Phase
Adaptive
Interface
MLV
Dimmer
3-Wire
Fluorescent
Dimmer
ELV
Dimmer
3-Wire
Fluorescent
Dimmer
For illustration purposes only. Consult model number pages for specific voltage and
capacity information.
For more information on LED drivers, visit www.lutron.com/LED.
**Consult www.lutron.com/LED for compatible 0-10 V LED drivers.
†
Interface provides additional capacity and/or may be different voltage than dimmer.
www.lutron.com | 1.800.523.9466 |
A26
Addendum | Advanced conceptual connections
Spacer System
®
Incandescent
dimming
Switched
loads
Switched
Fan
Non-Dim
Lighting
Incandescent/
Halogen
Switched
Motors
†
†
Wallbox
Phase
Adaptive
Interface
Incandescent/
Halogen
Dimmer
3-Wire
Fluorescent
Dimmer
Switching
Module
Switch
Switch
Switching
Module
Switch
For illustration purposes only. Consult model number pages for specific voltage and
capacity information.
†
Interface provides additional capacity and/or may be different voltage than dimmer.
www.lutron.com | 1.800.523.9466 |
A27
Addendum | Advanced conceptual connections
Diva
®
3-wire
fluorescent
dimming
0-10 V
fluorescent
dimming
2-wire
fluorescent
dimming
Lamps:
Lamps:
Lamps:
Linear
Lamps:
Lamps:
U-Bent
Linear
Hi-lume®
3D Ballasts
Compact
Twin Tube
U-Bent
Linear
Compact
Twin Tube
Compact SETM
Ballasts
Hi-lume®
Ballasts
EcoSystem®
Ballasts
Compact
U-Bent
Linear
0-10 V
Ballasts
(by others)
Tu-Wire®
Ballasts
Eco-10®
Ballasts
†
†
†
Phase
Adaptive
Power
Interface
3-Wire Fluorescent
Interface
3-Wire
Fluorescent
Dimmer
3-Wire
Fluorescent
Dimmer
Tu-Wire
Fluorescent
Dimmer
3-Wire
Fluorescent
Dimmer
††
Power
Pack
0-10 V
Dimmer
0-10 V
Interface
3-Wire
Fluorescent
Dimmer
For illustration purposes only. Consult model number pages for specific voltage and
capacity information.
For ballast information, visit www.lutron.com/ballasts.
Interface provides additional capacity and/or may be different voltage than dimmer.
PowerPack provides on/off switching to 0-10 V load.
†
††
www.lutron.com | 1.800.523.9466 |
A28
Addendum | Advanced conceptual connections
Diva
®
LED
dimming
Low Voltage
dimming
Low Voltage
LED Lighting
0-10 V LED
Drivers
(by others)
Hi-lume®
LED Driver
Magnetic
Low Voltage
Electronic
Low Voltage
MLV
Transformer
(by others)
ELV
Transformer
(by others)
†
†
3-Wire
Fluorescent
Interface
3-Wire
Fluorescent
Dimmer
3-Wire
Fluorescent
Dimmer
†
†
Power
Pack
0-10 V
Dimmer
0-10 V
Interface
3-Wire
Fluorescent
Dimmer
Wallbox
Phase
Adaptive
Interface
Wallbox
Phase
Adaptive
Interface
††
MLV
Dimmer
3-Wire
Fluorescent
Dimmer
ELV
Dimmer
3-Wire
Fluorescent
Dimmer
For illustration purposes only. Consult model number pages for specific voltage and
capacity information.
For more information on LED drivers, visit www.lutron.com/LED.
Interface provides additional capacity and/or may be different voltage than dimmer.
PowerPack provides on/off switching to 0-10 V load.
†
††
www.lutron.com | 1.800.523.9466 |
A29
Addendum | Advanced conceptual connections
Diva
®
Incandescent
dimming
CFL/LED
dimming
Incandescent/
Halogen
Screw-base
CFL/LED
†
Wallbox
Phase
Adaptive
Interface
Incandescent/
Halogen
Dimmer
Incandescent/
Halogen
eco-dim®
Dimmer
C•LTM
Dimmer
3-Wire
Fluorescent
Dimmer
C •L
Dimmer
For illustration purposes only. Consult model number pages for specific voltage and
capacity information.
†
Interface provides additional capacity and/or may be different voltage than dimmer.
www.lutron.com | 1.800.523.9466 |
A30
Addendum | Advanced conceptual connections
Diva
®
Switched
loads
Non-Dim
Lighting
Switched
Fan
Ceiling
fan
Switched
Motors
Ceiling Fan
†
Switching
Module
Claro®
Switch
Claro
Switch
Fan
Control
For illustration purposes only. Consult model number pages for specific voltage and
capacity information.
www.lutron.com | 1.800.523.9466 |
A31
Addendum | Advanced conceptual connections
Lyneo Lx
®
3-wire
fluorescent
dimming
2-wire
fluorescent
dimming
Lamps:
Lamps:
Lamps:
Lamps:
U-Bent
Linear
Hi-lume®
3D Ballasts
Compact
Twin Tube
U-Bent
Linear
Compact
Twin Tube
Compact SETM
Ballasts
Hi-lume®
Ballasts
EcoSystem®
Ballasts
Compact
U-Bent
Linear
Tu-Wire®
Ballasts
Eco-10®
Ballasts
†
†
Phase
Adaptive
Power
Interface
3-Wire Fluorescent
Interface
3-Wire
Fluorescent
Dimmer
3-Wire
Fluorescent
Dimmer
Tu-Wire
Fluorescent
Dimmer
3-Wire
Fluorescent
Dimmer
For illustration purposes only. Consult model number pages for specific voltage and
capacity information.
For ballast information, visit www.lutron.com/ballasts.
†
Interface provides additional capacity and/or may be different voltage than dimmer.
www.lutron.com | 1.800.523.9466 |
A32
Addendum | Advanced conceptual connections
Lyneo Lx
®
0-10 V
fluorescent
dimming
LED
dimming
Lamps:
Low Voltage
LED Lighting
Linear
0-10 V LED
Drivers
(by others)
0-10 V
Ballasts
(by others)
3-Wire
Fluorescent
Interface
0-10 V
Interface
0-10 V
Interface
3-Wire
Fluorescent
Dimmer
3-Wire
Fluorescent
Dimmer
3-Wire
Fluorescent
Dimmer
Hi-lume®
LED Driver
†
3-Wire
Fluorescent
Dimmer
For illustration purposes only. Consult model number pages for specific voltage and
capacity information.
For more information on LED drivers, visit www.lutron.com/LED.
†
Interface provides additional capacity and/or may be different voltage than dimmer.
www.lutron.com | 1.800.523.9466 |
A33
Addendum | Advanced conceptual connections
Lyneo Lx
®
Low Voltage
dimming
Magnetic
Low Voltage
Electronic
Low Voltage
MLV
Transformer
(by others)
Ceiling Fan
Non-Dim
Lighting
Switched
Motors
ELV
Transformer
(by others)
†
†
Wallbox
Phase
Adaptive
Interface
MLV
Dimmer
Switched
loads
Ceiling
fan
3-Wire
Fluorescent
Dimmer
†
Wallbox
Phase
Adaptive
Interface
ELV
Dimmer
3-Wire
Fluorescent
Dimmer
Switching
Module
Fan
Control
Switch
Switch
For illustration purposes only. Consult model number pages for specific voltage and
capacity information.
†
Interface provides additional capacity and/or may be different voltage than dimmer.
www.lutron.com | 1.800.523.9466 |
A34
Addendum | Advanced conceptual connections
Skylark Contour
TM
Incandescent
dimming
CFL/LED
dimming
Incandescent/
Halogen
Screw-base
CFL/LED
Incandescent/
Halogen
eco-dim®
Dimmer
C•LTM
Dimmer
C •L
Dimmer
For illustration purposes only. Consult model number pages for specific voltage and
capacity information.
www.lutron.com | 1.800.523.9466 |
A35
Addendum | Advanced conceptual connections
Skylark
®
3-wire
fluorescent
dimming
2-wire
fluorescent
dimming
Lamps:
Lamps:
Lamps:
Lamps:
U-Bent
Linear
Hi-lume®
3D Ballasts
Compact
Twin Tube
U-Bent
Linear
Compact
Twin Tube
Hi-lume®
Ballasts
EcoSystem®
Ballasts
Compact SETM
Ballasts
Compact
U-Bent
Linear
Tu-Wire®
Ballasts
Eco-10®
Ballasts
†
†
Phase
Adaptive
Power
Interface
3-Wire Fluorescent
Interface
3-Wire
Fluorescent
Dimmer
3-Wire
Fluorescent
Dimmer
Tu-Wire
Fluorescent
Dimmer
3-Wire
Fluorescent
Dimmer
For illustration purposes only. Consult model number pages for specific voltage and
capacity information.
For ballast information, visit www.lutron.com/ballasts.
†
Interface provides additional capacity and/or may be different voltage than dimmer.
www.lutron.com | 1.800.523.9466 |
A36
Addendum
Addendum
| Advanced
| Advanced
conceptual
conceptual
connections
connections
Skylark
®
LED
dimming
Neon/cold
cathode
dimming
Low Voltage
LED Lighting
Neon/Cold
Cathode
0-10 V LED
Drivers
(by others)
Hi-lume®
LED Driver
Low Voltage
dimming
Magnetic
Low Voltage
Electronic
Low Voltage
MLV
Transformer
(by others)
ELV
Transformer
(by others)
†
†
†
†
3-Wire
Fluorescent
Dimmer
3-Wire
Fluorescent
Interface
0-10 V
Interface
Wallbox
Phase
Adaptive
Interface
3-Wire
Fluorescent
Dimmer
3-Wire
Fluorescent
Dimmer
3-Wire
Fluorescent
Dimmer
Wallbox
Phase
Adaptive
Interface
Wallbox
Phase
Adaptive
Interface
MLV
Dimmer
3-Wire
Fluorescent
Dimmer
ELV
Dimmer
3-Wire
Fluorescent
Dimmer
For illustration purposes only. Consult model number pages for specific voltage and
capacity information.
For more information on LED drivers, visit www.lutron.com/LED.
†
Interface provides additional capacity and/or may be different voltage than dimmer.
www.lutron.com | 1.800.523.9466 |
A37
Addendum | Advanced conceptual connections
Skylark
®
Incandescent
dimming
Ceiling
fan
Ceiling
fan/light
Ceiling
fan/light
Incandescent
dimming
Incandescent
dimming
Incandescent/
Halogen
Ceiling Fan
Fan/Light
Fan/Light
Incandescent/
Halogen
Incandescent/
Halogen
†
Wallbox
Phase
Adaptive
Interface
Incandescent/ Incandescent/ 3-Wire
Halogen
Halogen
Fluorescent
Dimmer
eco-dim®
Dimmer
Dimmer
Fan
Control
Fan/Light
Switch
Fan/Light
Control
Dual
Incandescent
Dimmer
For illustration purposes only. Consult model number pages for specific voltage and
capacity information.
†
Interface provides additional capacity and/or may be different voltage than dimmer.
www.lutron.com | 1.800.523.9466 |
A38
Addendum | Advanced conceptual connections
Abella
®
Low Voltage
dimming
Incandescent
dimming
Switched
loads
*
Magnetic
Low Voltage
Incandescent/
Halogen
Switched
Fan
Non-Dim
Lighting
MLV
Transformer
(by others)
†
Switching
Module
MLV
Dimmer
Incandescent/
Halogen
Dimmer
Switch
Switch
For illustration purposes only. Consult model number pages for specific voltage and
capacity information.
*Refer to pg. 118 for specific load type.
Interface provides additional capacity and/or may be different voltage than dimmer.
†
www.lutron.com | 1.800.523.9466 |
A39
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement