HID Proximity
HID Proximity
125 kHz Proximity Cards and Readers
For security managers, dealers, integrators and OEMs, HID
proximity cards and readers are recognized as the industry
standard for physical access control. Featuring 125 kHz RFID
technology, HID proximity products are robust, affordable,
and seamlessly integrate with access control systems.
15
HID Global Product Catalog
HID Proximity Readers
Did you know?
HID has a multilingual installation
manual for ProxPoint Plus, ThinLine II,
MiniProx, ProxPro II and Prox80 with
instructions in English, French, German,
Spanish, Portuguese, Japanese, Chinese,
Korean and Russian. The manual can be
downloaded from www.hidglobal.com.
ProxPoint® Plus
125 kHz value priced proximity card reader
Base Part Number • 6005, 6008
• Small sized reader features a beeper and multicolor LED which can be
host and/or locally controlled
• Can mount directly on metal with no change in read range performance
• Power requirements: 5-16 VDC
• Dimensions: 3.14˝ x 1.70˝ x 0.66˝ (7.96 cm x 4.3 cm x 1.68 cm)
• Read Range: up to 3.0˝ (7.5 cm)*
(Gray, Black, Beige, White)
MiniProx®
125 kHz mullion mount proximity card reader
Base Part Number • 5365, 5368
• Power requirements: 5-16 VDC
• Dimensions: 6.0˝ x 1.7˝ x 1.0˝ (15.2 cm x 4.3 cm x 1.91 cm)
• Read Range: up to 5.5˝ (14.0 cm)*
(Gray, Black, Beige, White)
Thinline® II
125 kHz low profile proximity card reader
Base Part Numbers • 5395, 5398
• The size of most standard U.S. switch plates
• Available with Wiegand or Clock-and-Data interface
• Power requirements: 5-16 VDC
• Dimensions: 4.7˝ x 3.0˝ x 0.68˝ (11.9 cm x 7.6 cm x 1.7 cm)
• Read Range: up to 5.5˝ (14.0 cm)*
(Gray, Black, Beige, White)
* Dependent upon installation conditions and credential type
HID Global Product Catalog
16
ProxPro®
125 kHz versatile proximity card reader
Base Part Numbers • 5355, 5352, 5358
• Ideal for medium-range applications
• Available with Wiegand, Serial (RS-232/RS-422) or
Clock-and-Data interface
• Power requirements: 10-28.5 VDC
• Dimensions: 5.0˝ x 5.0˝ x 1.0˝ (12.7 cm x 12.7 cm x 2.54 cm)
• Read Range: up to 8.0˝ (20.5 cm)*
(Black, Beige)
ProxPro® with keypad
125 kHz keypad proximity card reader with keypad
Base Part Numbers • 5355, 5352, 5358
• Ideal for medium-range applications
• Available with Wiegand, Serial (RS-232/RS-422) or
Clock-and-Data interface
• Power requirements: 10-28.5 VDC
• Dimensions: 5.0˝ x 5.0˝ x 1.0˝ (12.7 cm x 12.7 cm x 2.54 cm)
• Read Range: up to 8.0˝ (20.5 cm)*
(Black, Beige)
ProxPro® II
125 kHz new generation proximity card reader
Base Part Numbers • 5455, 5458
• Versatile Proximity Card Reader
• Optional glass mount kit available for mounting the
reader behind glass
• Power requirements: 5-16 VDC
• Dimensions: 5.0˝ x 5.0˝ x 1.0˝ (12.7 cm x 12.7 cm x 2.54 cm)
• Read Range: up to 8.0˝ (20.5 cm)*
(Gray, Black, Beige, White)
MaxiProx®
125 kHz long range proximity card reader
Base Part Number • 5375
• Auto-tune allows read range to be maintained within
four inches of metal
• RS-232, RS-422, and RS-485 output modes are
configurable
• “Parking hold” feature ensures accurate detection of
vehicles in parking lanes
• Reads all HID Formats
• Power requirements: 12 or 24 VDC (configurable)
• Dimensions: 12.0˝ x 12.0˝ x 1.0˝
(30.5 cm x 30.5 cm x 2.54 cm)
• Available in Wiegand or Clock-and-Data Interface
• Read Range: up to 24.0˝ (61.0 cm)*
(Gray)
* Dependent upon installation conditions and credential type
Did you know?
HID’s ProxPass® II active vehicle tag enables convenient, handsfree parking control when used with the MaxiProx reader.
17
HID Global Product Catalog
HID Proximity Readers
ProxPoint Plus®
MiniProx®
Thinline® II
ProxPro®
Base Model
Number
6005B/6008B
5365E/5368E
5395C/5398C
5355A/5352A/5358A
Dimensions
3.13˝ x 1.7˝ x .66˝
(8.0 cm x 4.5 cm
x 1.5 cm)
6.0˝ x 1.7˝ x 1.0˝
(15.0 cm x 4.5 cm
x 2.0 cm)
4.7˝ x 3.0˝ x .68˝
(12.0 cm x 7.5 cm
x 1.5 cm)
5.0˝ x 5.0˝ x 1.0˝
(12.5 cm x 12.5 cm x
2.5 cm)
3.6 oz (102 g)
7.89 oz (224 g)
7.33 oz (208 g)
9.62 oz (273 g)
Weight
Read Range
Up to 3.0˝ (7.5 cm)
Mounting
Up to 5.5˝ (14.0 cm)
Single-gang
electrical box
Mullion
Up to 8.0˝ (20.5 cm)
Single-gang electrical
box;
Glass Mount Kit
Available
Power Supply
5-16 VDC
10-28.5 VDC
Current
Requirements
35 mA
155 mA
Termination
Output Formats
Tamper
Pigtail
Pigtail or
Terminal Strip
Wiegand or
Clock-and-Data
Wiegand,
Clock-and-Data,
RS-232 or RS-422
No
Switch
Indoor/Outdoor
Both
Warranty
HID Global Product Catalog
Pigtail
Lifetime
18
Comparison Chart
ProxPro® II
ProxPro® with
Keypad
EntryProx™
MaxiProx®
Prox80™
5455B/5458B
5355A/5352A/5358A
4045C
5375A
5405A/5408A
5.25˝ x 2.75˝ x 1.37˝
(13.5 cm x 7.0 cm
x 3.5 cm)
12.0˝ x 12.0˝ x 1.0˝
(30.5 cm x 30.5 cm
x 2.5 cm)
3.15˝ x 3.15˝ x 0.8˝
(8.0 cm x 8.0 cm
x 2.0 cm)
11.76 oz (333 g)
50.8 oz (1440 g)
2.2 oz (63 g)
Up to 8.0˝ (20.5 cm)
Up to 3.0˝ (7.5 cm)
Up to 24.0˝ (61.0 cm)
Up to 5.5˝ (14.0 cm)
Single-gang electrical box;
Glass Mount Kit Available
US or EU single gang
box, wall surface, or
on glass with included
adhesive pads
Mount on nonmetallic surfaces for
optimal read range
performance.
EU/Asian
single-gang box
10-15 VDC
12 VDC or 24 VDC
5-16 VDC
5.0˝ x 5.0˝ x 1.0˝
(12.5 cm x 12.5 cm x 2.5 cm)
13.65 oz (387 g)
5-16 VDC
40 mA
9.62 oz (273 g)
10-28.5 VDC
155 mA
Pigtail
150 mA
200/700 mA
@ 12 VDC
260 mA/1.2 A
@ 24 VDC
Terminal Strip
Wiegand or
Clock-and-Data
Wiegand,
Clock-and-Data,
RS-232 or RS-422
No
Switch
Wiegand
35 mA
Pigtail
Wiegand, Clock-andData, RS-232, RS-422
and RS-485
Wiegand or
Clock-and-Data
Switch
No
Both
Lifetime
19
HID Global Product Catalog
What format do you need?
This is the question no one wants to ask or hear, but its answer is critical to program
and order any credential.
What is a format?
A format is the structure of the data stored in an access control credential. Basically
it is comprised of a set of binary digits – “bits”– put together a certain way to create
a binary number, which is converted into a credential number by an access control
system. The number of ones and zeros, and how they are put together, determines the
format and ultimately the credential number.
For example: A 26-bit format (H10301) is created like this
1-11111111-0001011111101100-1 with the first set of ones (in red) representing
the site code and the second set of ones and zeros (in blue) representing the
credential number. The access control system sees this format as card number 6124
with a site code 255. The 26-bit format is the most common format requested by
dealers and can be used by most access control systems available today. However,
there are many formats available and some formats are unique to access control
systems and do not work with other formats at the same time. This is why it is so
important to know the format when ordering credentials.
Here is some additional information about the 26-bit format (H10301) and other
formats you may have come across:
HID 26-Bit Format: H10301
General: The 26-bit format (Format number H10301) is the industry standard
format, and is an open format. The sale of this format is not limited to any one
company. The range of credential numbers available in this format is limited, and
therefore, the potential exists for credential numbers to be duplicated. It is important
to understand that HID does not insure that credential numbers will not be
duplicated. HID does not control or restrict the ordering of credentials programmed
with the standard 26-bit format. Convenience in ordering credentials and universal
access control panel acceptance are the primary benefits of using the standard 26-bit
card format.
Description: The 26-bit format consists of 255 possible facility codes. Within each
facility code, there are 65,535 unique card numbers.
Sales Policy: This format can be sold to any customer.
HID Proprietary 37-Bit Format: H10302
General: In an effort to provide an open format to the industry, while simultaneously
assuring that the numbers are unique and will not be duplicated, the 37-bit format
was developed. Under this format, HID controls the issuing of credential numbers
and does not duplicate the numbers.
Description: The 37-bit format can be used to program a wide range of unique
credential numbers. Although it is available to all customers, not all access control
systems can handle such a large data length format. In addition, many systems are
unable to handle a format that does not have a facility code.
HID Global Product Catalog
20
Sales Policy: Just like the 26-bit format, the 37-bit format can be sold to any customer.
Although it is available to all customers, HID controls the numbers generated for
each order. Buyers must confirm that the system that the credentials are to be used
on is capable of using a 37-bit number with no facility code.
HID Proprietary 37-Bit Format with Facility Code: H10304
General: The 37-bit format with facility code differs from the 37-bit format only in
that it also contains a facility code. Just like the 37-bit format without facility code,
this format provides the customer with an open format in which credential numbers
will not be duplicated because HID tracks the credential manufacturing process to
prevent duplication.
Description: This 37-bit format has 65,535 facility codes available and over 500,000
card numbers within each facility code. Just like the 37-bit format without facility
code, many systems are not capable of handling a format as large as 37 bits. In
addition, many systems are not capable of handling a facility code as large as 65,535.
Sales Policy: The 37-bit format with facility code is ideal for dealers who would like
to have their own format. This allows them to have the security of no credential
duplication, without dependence on a system supplier for a format. This format is
reserved for customers with a requirement for a large population of credentials.
Corporate 1000 Format (see the Corporate 1000 page for more details)
General: The Corporate 1000 format is a 35-bit format designed to provide large
end-users with their own proprietary format. This assures them that their credentials
will not be duplicated because HID reserves an exclusive Corporate 1000 format
for each end user. This format also provides the end-user the freedom to work with
any system and with any dealer of their choice. Some access systems are not capable
of handling a 35-bit format, but as a service to the customer, many OEM’s will make
enhancements to their control systems to allow the use of an HID Corporate 1000
format. The end-user is offered the security and flexibility of selecting and authorizing
the security dealer of his/her choice and controlling the issuance of credentials for
the organization.
Description: The Corporate 1000 format is a 35-bit format with a unique Company
ID Code and more than 1,000,000 available credential numbers.
Sales Policy: The Corporate 1000 format offers the end-user a large quantity of
available credential numbers and is typically reserved for customers with the need or
potential to badge a large number of cardholders. The Corporate 1000 format is also
available to large, geographically diverse organizations with a requirement to unify
the structure of their access control system around an exclusive access control card
format under their control.
We hope these brief explanations help answer some of the questions you may have
about formats. If you require further information, please contact us and we will work
to clarify your understanding.
21
HID Global Product Catalog
HID Proximity Credentials
ProxCard® II
Value priced 125 kHz proximity card
Base Part Number • 1326
• Price competitive with all other card technologies
• Thin enough to carry in a wallet or purse
ISOProx® II
125 kHz thin proximity card
Base Part Number • 1386
• Combines proximity technology and offers photo
identification capability on a single card
• Graphics quality surface for use with direct image printers
• Same size and thickness as a standard credit card
• Vertical or horizontal slot punch capability
DuoProx® II
125 kHz thin proximity card with magnetic stripe
Base Part Number • 1336
• Combines proximity technology and offers photo
identification capability on a single card
• Graphics quality surface for use with direct image
printers
• Same size and thickness as a standard credit card
• Vertical or horizontal slot punch capability
• Magnetic stripe technology
• Thin enough to be used with standard swipe or insert
readers
Smart ISOProx® II
125 kHz ISO-thin proximity card, contact smart
chip embeddable (optional magnetic stripe) 1
Base Part Number • 1397
• Allows a contact smart chip module to be embedded
for multi-technology applications
• Graphics quality surface for use with direct image printers
• Smart DuoProx II includes magnetic stripe
• Same size and thickness as a standard credit card
1 ISO 7816 compliant for embedding optional contact smart chip module. Some
custom graphics can increase overall card thickness.
HID Global Product Catalog
22
Smart DuoProx® II
125 kHz ISO-thin proximity card with magnetic
stripe, contact smart chip embeddable 1
Base Part Number • 1398
• Allows a contact smart chip module to be embedded for
multi-technology applications
• Graphics quality surface for use with direct image
printers
• Smart DuoProx II includes magnetic stripe
• Same size and thickness as a standard credit card
1 ISO 7816 compliant for embedding optional contact smart chip module.
Some custom graphics can increase overall card thickness.
MicroProx® Tag
125 kHz proximity adhesive tag
Base Part Number • 1391
• The size of a coin, the Tag easily attaches to all nonmetallic materials
• The Tag can be programmed in any HID proximity format, and is
compatible with all HID proximity readers
• The Tag is RF-programmable for ease of encoding with HID’s
ProxProgrammer®
Did you know?
You can add a MicroProx Tag
to a cellphone or PDA to create a secondary credential.
ProxKey® II
Convenient 125 kHz proximity keyfob
Base Part Number • 1346
• Small enough to fit on a key ring
• Universal compatibility with HID proximity readers
• Dimensions: 1.90˝ x 0.90˝ x 0.345˝ (4.83 x 2.29 x 0.88 cm)
• Weight: 0.26 oz. (7.3 gm)
ProxPass® II
Long range 125 kHz proximity active vehicle tag 2
Base Part Number • 1351
• Active tag for vehicle access control
• Provides up to eight-foot read range
• Solely compatible with the MaxiProx® reader and
all HID card formats
• One year warranty
• Replaceable battery
• Dimensions: 3.61˝ x 2.66˝ x 0.30˝ (91.6 x 67.5 x 7.6 mm)
2 ProxPass II features a one-year warranty and has a 2-5 year battery life,
depending on usage.
23
HID Global Product Catalog
HID Proximity Credentials
Did you know that most proximity, magnetic stripe and
iCLASS credentials purchased from HID since Sept 1, 2003
have the sales order number printed on them?
The example below explains where to look and how to identify the sales order number on
most credentials ordered today.
The benefits: The order identification number “Sales Order Number” enables us to help
trace a past order placed with HID. This number is useful when customers need to place an
order for a particular credential which requires information they may not have immediately
on-hand. A call to the HID Global Customer Service at 800-872-5359 with this Sales Order
Number allows us quickly to identify the style of credential including numbering (matching,
non-matching, etc.), format*, site code and most importantly, the previously ordered
credential numbers. So just remember this little bit of information the next time a customer
comes in with a credential or calls you wanting to order something but does not know
exactly what they need. With this simple printed Sales Order Number, you may have all the
information you need.
12345 = Card ID Number
Cover (Front)
base (back)
12345- YYYYYYYY-YY
* Proprietary format unavailable
YYYYYYYY-YY = Sales order number
ProxProgrammer®
Program proximity cards and tags ON DEMAND!
Base Part Number • 1050
• Programs all HID proximity cards and tags except for
ProxPass active tags
• Custom formats available
• Security features for controlled operation
• Ease of programming
• Dimensions: 5.0˝ x 5.0˝ x 4.3˝ (12.7 x 12.7 x 10.9 cm)
ProxCard® Plus
Wiegand and 125 kHz proximity card
Base Part Number • 169
• Combines Wiegand technology, proximity technology and
photo identification capability on a single card
• Graphics quality surface for use with direct image printers
HID Global Product Catalog
24
Multi-Technology Transition Cards
iCLASS® Read/Write Contactless Smart Chip & Coil
Operating Frequency: 13.56 MHz read/write technology
Memory Size: 2k bit (256 Byte) with two application areas, 16k bit (2k Byte) with two or 16 application
areas, or 32k bit (4k Bytes) with two or 16 application areas plus an additional 16k application area
Read Range: Up to 4.5˝ (11.4 cm) depending on local installation conditions and card reader selection
RF Interface: As suggested by ISO/IEC 15693
Format: Any proximity bit format up to 84 bits. For more information, use HID’s iCLASS Reference
Guide or visit our website at www.hidglobal.com/iclass.
Contact Smart Chip Module Guidelines
For customers who require a contact smart chip module, HID has developed partnerships with
the leading providers of application software and contact smart chip modules. Depending on your
specifications, HID can embed contact smart chip modules from a number of industry leaders. When
application software is needed, turn to HID’s partners. To learn more about HID’s smart card offerings
and partners, visit our website at www.hidglobal.com/smart.
MIFARE® Contactless Memory Chip and Coil
Operating Frequency: 13.56 MHz read/write technology
Memory Size: 8k bit (1k Byte)
Read Range: Up to 1.5˝ (3.8 cm) depending on local installation conditions and card reader selection.
RF Interface: As suggested by ISO/IEC 14443, Type A
Fixed Serial Number: Unique 32 bit.
For more information, use HID’s MIFARE Reference Guide or visit our website at www.hidglobal.com.
iCLASS® Prox Card
13.56 MHz iCLASS contactless smart card and
125 kHz proximity thin card
Base Part Number • 202
• 13.56 MHz iCLASS read/write technology and HID 125 kHz
proximity technology in a single ISO standard thickness card
• Enables contactless smart card applications to be added to an
existing HID proximity technology access control system
• Offers the ability to add a magnetic stripe, barcode, anticounterfeiting feature, custom artwork, or photo ID
• Meets ISO standards for thickness for use with direct image and
thermal transfer printers
MIFARE®/Prox Card
125 kHz thin proximity & 13.56 MHz MIFARE® card
(optional magnetic stripe)
Base Part Number • 1431
• Combine MIFARE 1K and HID proximity technologies to add
smart card applications, such as cashless vending, corporate
and campus applications, event ticketing, customer loyalty and
photo ID cards, to access control systems
• Provides high security with mutual authentication, data
encryption and unique 32-bit serial number and supports all
HID proximity card formats, including Corporate 1000
• Photo ID compatibility allows printing directly to the card
with a direct image or thermal transfer printer
• Cards can be produced with visual security and anticounterfeiting features such as holograms, ultra-violet
fluorescent inks, micro-printing or a custom logo
• Also Available in Composite Polyester / PVC and MIFARE
4K versions
25
HID Global Product Catalog
HID Proximity Credentials
Base Part Number
ProxCard® II
ISOProx® II
DuoProx® II
Smart
ISOProx II™
Smart
DuoProx® II
1326
1386/1586
1336/1536
1397/1597
1398/1598
Read Range: *
ProxPoint® Plus
Up to 3.0˝ (7.5 cm)
Up to 2.5˝ (6.5 cm)
®
MiniProx
Up to 5.5˝ (14.0 cm)
Up to 5.0˝ (12.5 cm)
Thinline II
Up to 5.5˝ (14.0 cm)
Up to 5.0˝ (12.5 cm)
ProxPro
Up to 8.0˝ (20.5 cm)
Up to 7.0˝ (18.0 cm)
ProxPro® II
Up to 9.0˝ (23.0 cm)
Up to 8.0˝ (20.0 cm)
MaxiProx®
Up to 29.0˝ (74.0 cm)
Up to 20.0˝ (51.0 cm)
Up to 3.0˝ (7.5 cm)
Up to 2.5˝ (6.5 cm)
®
®
EntryProx™
Prox80
™
Up to 5.5˝ (14.0 cm)
Up to 5.0˝ (12.5 cm)
Memory Size/
Application Area
N/A
HID Proximity 125 kHz
Yes
Contact Smart Chip
Module Embeddable
No
Yes**
Wiegand Strip
No
Magnetic Stripe
No
Yes
Printable ***
Visual Security Options
No
Yes
Yes
Standard HID Artwork
Slot Punch
Up to 2.5˝ (6.0 cm)
Optional
Vertical
(standard)
Horizontal or Vertical Optional
N/A
Vertical Optional
Yes
Additional Security
Options
Corp 1000
Warranty
Lifetime
* Dependant upon installation conditions.
** Contact smart chip module not included. Ask about HID’s SMARTS Program for off-the-shelf contact smart chip embedded cards.
*** Some types of printing processes can take these credentials out of ISO compliance for thickness. Consult factory for more information.
HID Global Product Catalog
26
Comparison Chart
iCLASS® Prox
MIFARE®/Prox
ProxCard®
Plus
ProxKey® II
MicroProx®
Tag
ProxPass® II
202X/212X;
203X/213X
1431
169
1346
1391
1351
Up to 1.0˝ (2.5 cm)
Up to 1.5˝ (4.0 cm)
Up to 2.0˝ (5.0 cm)
N/A
Up to 2.5˝ (6.5 cm)
N/A
Up to 3.0˝ (7.5 cm)
N/A
Up to 2.5˝ (6.5 cm)
Up to 5.0˝ (12.5 cm)
Up to 5.0˝ (12.5 cm)
Up to 2.0˝ (5.0 cm)
Up to 1.5˝ (4.0 cm)
Up to 2.0˝ (5.0 cm)
Up to 7.0˝ (18.0 cm)
Up to 3.0˝ (7.5 cm)
Up to 4.0˝
(10.0 cm)
N/A
Up to 8.0˝ (20.0 cm)
Up to 4.0˝ (10.0 cm)
Up to 4.5˝
(11.5 cm)
N/A
Up to 20.0˝ (51.0 cm)
Up to 13.0˝
(33.0 cm)
Up to 17.0˝
(43.0 cm)
Up to 15.0˝
(38.0 cm)
Up to 8.0´ (2.5 m)
Up to 2.5˝ (6.5 cm)
Up to 1.0˝ (2.5 cm)
Up to 1.5˝ (4.0 cm)
Up to 2.0˝ (5.0 cm)
N/A
Up to 5.0˝ (12.5 cm)
Up to 1.5˝
(3.5 cm)
Up to 2.0˝ (5.0 cm)
Up to 2.5˝
(6.0 cm)
N/A
MIFARE 1K: 1K Byte
(8k bits) in 16 64-byte
Sectors
2k bits with two
application areas;
16k bits with two
application areas, 16k
bits with 16 application
areas; 32k bits
(16k/2+16k/1), 32k
bits (16k/16+16k/1)
N/A
MIFARE 4K: 4K Byte
(32k bits) in 40
Sectors: 32 sectors of
64 bytes, 8 sectors of
256 bytes.
Yes
Optional**
No
No
Yes
No
Optional
No
Yes
No
Optional
No
Horizontal or
Vertical Optional
Vertical Optional
Yes
Yes
Key Ring Hole
N/A
No
N/A
Corp 1000
Lifetime
One Year
27
HID Global Product Catalog
Corporate 1000 Program
®
HID’s Corporate 1000 Program gives security professionals the ability to
standardize on a “Single Card Solution,” providing timely and educational
information to end-users regarding the securing of people, property and
assets. This program insures that advanced RFID technological solutions
continue to be developed to meet the demands of ever-changing
dynamics in the workplace.
HID’s Corporate 1000 program allows companies to standardize on one
card for their access control systems. See below for answers to common
questions.
HID Corporate 1000 Program
Frequently Asked Questions
1. What is the HID Corporate 1000 Program?
The Corporate 1000 Program allows HID to provide end-user customers
with a 35-bit card format that is developed specifically for each individual
end-user customer. Within this program, HID can provide the end-user
with just over 1,000,000 individual card numbers within the assigned
format. Card numbers are tracked in the manufacturing process to
ensure that card numbers are not duplicated.
2. What are the benefits of the Corporate 1000 Program?
• Security of the card and associated data is increased due to the
customized 35-bit format that is proprietary to each individual
end-user.
• HID tracks card number sequences to prevent card number
duplication; the end-user is guaranteed that the card can be used on
standard HID proximity card readers throughout the world. Individual
employees can carry just one card to gain access to any facility in
which they have been authorized. In addition, the end-user may order
cards from multiple sources (as designated by the end-user) and be
guaranteed that card number duplication will not occur.
• Due to the size of the available card population, the end-user is
assured that cards in the desired format will be available for years
to come.
• The end-user is free to choose the access control hardware/software
platform that best meets the needs of individual sites, while insuring
that the same HID reader and card can be used. This provides the
end-user with maximum flexibility in choosing the access control
system and integrator/dealer that best meets their requirements.
The common component is the HID reader and card.
• The end-user has the flexibility to choose the vendor(s) that they
wish to purchase cards from at any time. The end-user may choose
to have one source of supply or many.
HID Global Product Catalog
28
3. Does my company qualify to participate
in the Corporate 1000 Program?
Most end-users who request a Corporate
1000 Format are accepted into the
Program. Although HID doesn’t have a
formal list of qualifications to participate
in the Corporate 1000 Program, HID wants to insure that Program
participants will receive a high level of value from using a Corporate 1000
Format.
Those who receive value from this format include:
• End-users with multiple locations and/or decentralized decision
making on card purchases.
• End-users with card and/or reader populations that are large (or
are expected to grow over time). The lead-time for card delivery
is not impacted by use of the Corporate 1000 Format. No matter
which HID format is used, lead times are based on the card to be
purchased.
4. How long does it take to establish a Corporate 1000 Format?
Once the completed Corporate 1000 Request and Authorization Form
is received by HID, it will take up to five (5) working days to establish the
format. The end-user and the sponsoring system integrator/dealer or
OEM will receive the assigned format number and a copy of the format
via FedEx® from HID.
5. Are there any costs associated with participating in the
Corporate 1000 Program?
There is no charge for development of the Corporate 1000 Format
and initial set-up of the end-user in the Program. Once you determine
that you wish to participate in the Program, you will complete the
authorization forms and return them to HID. The end-user’s systems
integrator/dealer is charged a nominal fee for card management and card
number tracking by HID. Please check with your systems integrator/
dealer to determine what impact, if any, this will have on your card
purchase price.
6. How do I enroll to participate in the Corporate 1000 Program?
To enroll in the program, simply complete the Corporate 1000 Format
Request Form and the Corporate 1000 Change and Authorization Form.
These forms are available on the HID website at www.hidglobal.com.
If you need assistance completing the form, please contact HID at
(949) 598-1600 or (866) 607-7339.
29
HID Global Product Catalog
Corporate 1000 Program
®
7. Can the Corporate 1000 Format be programmed into any HID
proximity card?
The assigned Corporate 1000 Format can be programmed into any
HID card or keyfob. Please consult the How To Order Guide on HID’s
website or check with your systems’ integrator/dealer to determine
which proximity credential best meets your needs.
8. Is there a specific part number associated with the use of the
Corporate 1000 Format?
There is no special part number. When ordering cards, order the part
number for the card you want. Then, simply indicate that the cards are
to be programmed in Corporate 1000 Format HXXXXX, using the
next number up. (The Corporate 1000 Format number, HXXXXX, will
be a letter and five numbers. This will be assigned once your individual
Corporate 1000 Format is established.)
The HID direct customer who is ordering the cards will be aware of
the need to put a separate line item on their P.O. that is associated with
programming the cards in the Corporate 1000 Format.
9. The end-user is currently using HID proximity technology but with
another bit format. Will the existing cards be compatible with the
Corporate 1000 Format?
When using HID cards in a bit format other than the 35-bit format,
you have the option of replacing all cards at one time or transitioning
into the program. The existing cards will not be compatible with the
Corporate 1000 Format unless reprogrammed.
If you choose to transition into the program, there are a few
constraints of which you need to be aware:
• At an existing site that is using a card format other than a 35-bit
format, it is important to determine if the existing access control
hardware/software platform has the ability to manage multiple card
formats simultaneously. In other words, can the system manage two
or more bit formats simultaneously? If not, any system users with
access to the site would need to be: (1) re-badged with a card in the
new format; or (2) the access control hardware/software platform
would need to be upgraded to allow for the use of multiple bit
formats simultaneously.
• At any site, it is important to verify that the access control hardware/
software being used or proposed for use can manage a 35-bit card
format. There are some older platforms in use that do not have this
capability. There are also an extremely limited number of newer
platforms with similar limitations.
• If the existing system can handle multiple formats, it is also imperative that you confirm that the system can handle the same card number
within multiple formats.
HID Global Product Catalog
30
Technical Overview
10. With Card Number 100 and a 26-bit format with Card Number 100,
will the system “see” the two cards as different numbers?
Many systems “see” cards in different formats with the same number. If this
is the case, identify the highest card number used on the existing system.
HID will then block these numbers from being used to ensure
that the card numbers do not appear to be
duplicates.
11. Why does HID ask me to provide a
card start number? Why would I use any
number other than the number 1?
If you plan to use two or more bit formats
simultaneously on the same access control
hardware/software configuration,
there may be an issue with duplicate
card numbers.
For example, assume that the current
format in use is a 26-bit format with
a facility code of 100. The existing card numbers in use range
from 1 to 20,000. The plan is to transition to a 35-bit format
over time. This means that the existing hardware/software configuration
will be reading and managing two bit formats simultaneously.
Two cards are to be entered into the system. These are:
• A 26-bit format card, facility code 100, and card number 25
• A 35-bit format card, company ID code 150, and card number 25
It is possible that the access control hardware/software configuration will
report both of these cards as card number 25. Although the cards have
different bit formats and facility/company ID codes, the system may not
differentiate based on the same card number being used.
For this reason, many end-users choose to start their card numbering above
the highest card number currently in use. If you are not sure of the highest
card number in use and a 26-bit format is in use, it is safe to use a card start
number of 66,000.
12. I have other technical questions not answered here. What should I do?
You may call HID at (866) 607-7339 and ask for Technical Support.
31
HID Global Product Catalog
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising