Disney | DCR5000-P | User's Manual | Disney DCR5000-P User's Manual

DCR5000.O/M.QXD
1/28/03
7:21 AM
User’s Guide
CLOCK RADIO
DCR5000-P
Page 16
DCR5000.O/M.QXD
1/28/03
7:21 AM
Page 1
QUICK REFERENCE
The Quick Reference is given to provide basic operation of the unit.
Please completely read the user’s guide to take advantage of all the
features this unit has to offer.
Set the Radio preset/Set the Disney Alarm type
Activate the Sleep function
Set the clock and/or the alarm time
Turn the Alarm on or off
Decrease the frequency/Adjust the hour
Turn the radio on or off
Increase the frequency/Adjust the minute
Select the AM/FM band
Display
Activates Snooze feature
Select the wake sound
(radio or Disney melodies)
Increase the radio preset
Select 12 hour or 24 hour time display
Select low or high display
Adjust the volume
Disney Elements © Disney
1
DCR5000.O/M.QXD
1/28/03
7:21 AM
Page 2
QUICK REFERENCE (CONTINUED)
TO LISTEN TO THE RADIO:
1. Press the Radio On/Off button to turn the unit on; the AM or FM indicator will light.
2. Press the AM/FM Band button to select AM or FM.
3. Tune a station by pressing the Tuning Up/Minute or Tuning Down/Hour button. Press
and hold either button and the unit will scan and stop on the next strong station.
4. Adjust the volume using the Volume control.
5. Press the Radio On/Off button to turn the unit off.
TO SET OR RESET THE ACTUAL TIME:
1. With the unit off, press the Clock Set/Alarm Set button once to set the time; the
Time indicator will light and the display will blink.
2. Press the Tuning Down/Hour button to set the hour and the Tuning Up/Minute
button to set the minute. Make sure the appropriate AM/PM indicator is lit if using
the 12 hour mode. Wait 10 seconds, or press the Clock Set/Alarm Set button
twice and the time will be set.
TO SET OR RESET THE ALARM TIME:
1. With the unit off, press the Clock Set/Alarm Set button twice to set the alarm
time; the Alarm On indicator will light and the display will blink.
2. Press the Tuning Down/Hour button to set the alarm hour and the Tuning
Up/Minute button to set the alarm minute. Make sure the appropriate AM/PM
indicator is lit if using the 12 hour mode. Wait 10 seconds, or press the Clock
Set/Alarm Set button again and the alarm time will be set.
TO SET THE ALARM TO WAKE TO RADIO:
1. Set the alarm time as instructed above. Select a radio station and make sure
the Volume control is set as desired.
2. Press the Alarm On/Off button once and the Alarm On and Radio (Alarm)
indicators will light. When the actual time matches the selected preset alarm
time, the radio will automatically turn on.
3. Press the Alarm On/Off button to turn off the alarm.
TO SET THE ALARM TO WAKE TO DISNEY ALARM:
1. Follow steps 1 and 2 in TO SET THE ALARM TO WAKE TO RADIO above.
2. Press the Alarm Type button repeatedly to cycle through the five Disney alarm
choices. Press the Radio Preset Set/Disney Alarm Type button to confirm. When
the actual time matches the selected preset alarm time, the selected tone will play.
3. Press the Alarm On/Off button to turn off the alarm.
Disney Elements © Disney
2
DCR5000.O/M.QXD
1/28/03
7:21 AM
Page 3
SAFETY PRECAUTIONS
DANGEROUS VOLTAGE:
The lightning flash with arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
dangerous voltage within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
ATTENTION:
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying
the appliance.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
• Place the unit on a stable surface.
• Avoid installing the unit in locations described below:
• Places exposed to direct sunlight or close to heat radiating
appliances such as electric heaters.
• On top of other stereo equipment that radiates too much heat.
• Places lacking ventilation or dusty places.
• Places subject to constant vibration.
• Humid or moist places.
SURGE PROTECTORS:
It is recommended to use a surge protector for AC connection. Lightning
and power surges ARE NOT covered under warranty for this product.
3
DCR5000.O/M.QXD
1/28/03
7:21 AM
Page 4
IMPORTANT SAFETY INSTRUCTIONS
Before using the unit, be sure to read all
operating instructions carefully. Please note
that these are general precautions and may
not pertain to your unit. For example, this unit
may not have the capability to be connected
to an outdoor antenna.
1. READ INSTRUCTIONS
All the safety and operating instructions
should be read before the product is
operated.
2. RETAIN INSTRUCTIONS
The safety and operating instructions should
be retained for future reference.
3. HEED WARNINGS
All warnings on the product and in the
operating instructions should be adhered to.
4. FOLLOW INSTRUCTIONS
All operating and use instructions should be
followed.
5. CLEANING
Unplug this product from the wall outlet
before cleaning. Do not use liquid cleaners
or aerosol cleaners. Use a damp cloth for
cleaning.
6. ATTACHMENTS
Do not use attachments not recommended
by the product's manufacturer as they may
cause hazards.
7. WATER AND MOISTURE
Do not use this product near water- for
example, near a bathtub, washbowl, kitchen
sink, or laundry tub, in a wet basement, or
near a swimming pool.
8. ACCESSORIES
Do not place this product on an unstable
cart, stand, tripod, bracket, or table. The
product may fall, causing serious injury and
serious damage to the product. Use only
with a cart, stand, tripod, bracket, or table
recommended by the manufacturer or sold
with the product. Any mounting of the
product should follow the manufacturer’s
instructions, and should use a mounting
accessory recommended by the
manufacturer.
8A. An appliance and cart combination should
be moved with care. Quick
stops, excessive force, and
uneven surfaces may cause
the appliance and cart
combination to overturn.
9. VENTILATION
Slots and openings in the cabinet and in the
back or bottom are provided for ventilation
and to ensure reliable operation of the
product and to protect it from overheating.
These openings must not be blocked or
covered. The openings should never be
blocked by placing the product on a bed,
sofa, rug, or other similar surface. This
product should never be placed near or over
a radiator or heat source. This product
should not be placed in a built-in installation
such as a bookcase or rack unless proper
ventilation is provided or the manufacturer's
instructions have been adhered to.
10. POWER SOURCES
This product should be operated only from
the type of power source indicated on the
marking label. If you are not sure of the type
of power supply to your home, consult your
appliance dealer or local power company.
For products intended to operate from
battery power, or other sources, refer to the
operating instructions.
11. GROUNDING OR POLARIZATION
This product is equipped with a polarized
alternating-current line plug (a plug having
one blade wider than the other). This plug
will fit into the power outlet only one way.
This is a safety feature. If you are unable to
insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail
to fit, contact your electrician to replace your
obsolete outlet. Do not defeat the safety
purpose of the polarized plug.
12. POWER-CORD PROTECTION
Power-supply cords should be routed so
that they are not likely to be walked on or
pinched by items placed upon or against
them, paying particular attention to cords at
plugs, convenience receptacles, and the
PORTABLE CART WARNING
(symbol provided by RETAC)
4
DCR5000.O/M.QXD
1/28/03
7:21 AM
Page 5
IMPORTANT SAFETY INSTRUCTIONS
point where they exit from the appliance.
13. LIGHTNING
To protect your product from a lightning
storm, or when it is left unattended and
unused for long periods of time, unplug it
from the wall outlet and disconnect the
antenna or cable system. This will prevent
damage to the product due to lightning and
power-line surges.
14. POWER LINES
An outside antenna system should not be
located in the vicinity of overhead power
lines or other electric light or power circuits,
or where it can fall into such power lines or
circuits. When installing an outside antenna
system, extreme care should be taken to
keep from touching such power lines or
circuits as contact with them might be fatal.
15. OVERLOADING
Do not overload wall outlets and extension
cords as this can result in a risk of fire or
electric shock.
16. OBJECT AND LIQUID ENTRY
Never push objects of any kind into this
product through openings as they may
touch dangerous voltage points or short out
parts that could result in fire or electric
shock. Never spill or spray any type of liquid
on the product.
17. SERVICING
Do not attempt to service this product
yourself as opening or removing covers may
expose you to dangerous voltage or other
hazards. Refer all servicing to qualified
service personnel.
18. REPLACEMENT PARTS
When replacement parts are required, be
sure the service technician uses
replacement parts specified by the
manufacturer or those that have the same
characteristics as the original part.
Unauthorized substitutions may result in fire,
electric shock or other hazards.
19. SAFETY CHECK
Upon completion of any service or repairs to
this product, ask the service technician to
perform safety checks to determine that the
product is in proper operating condition.
20. WALL OR CEILING MOUNTING
The product should be mounted to a wall or
ceiling only as recommended by the
manufacturer.
21. DAMAGE REQUIRING SERVICE
Unplug the product from the wall outlet and
refer servicing to qualified service personnel
under the following conditions:
a. When the power-supply cord or plug is
damaged.
b. If liquid has been spilled, or objects have
fallen into the product.
c. If the product has been exposed to rain or
water.
d. If the product does not operate normally by
following the operating instructions. Adjust
only those controls that are covered by the
operating instructions, as an adjustment of
other controls may result in damage and will
often require extensive work by a qualified
technician to restore the product to its
normal operation.
e. If the product has been dropped or the
cabinet has been damaged.
f. When the product exhibits a distinct change
in performance - this indicates a need for
service.
22. HEAT
The product should be situated away from
heat sources such as radiators, heat
registers, stoves, or other products
(including amplifiers) that produce heat.
23. NOTE TO CATV SYSTEM INSTALLER
This reminder is provided to call the CATV
system installer's attention to Article 820-40
of the NEC that provides guidelines for
proper grounding and, in particular, specifies
that the cable ground shall be connected to
the grounding system of the building, as
close to the point of cable entry as practical.
24. NONUSE PERIODS
The power cord of the appliance should be
unplugged from the outlet when left unused
for a long period of time.
5
DCR5000.O/M.QXD
1/28/03
7:21 AM
Page 6
LOCATION OF CONTROLS
LEFT
RIGHT
11
1
2
3
4
5
6
7
8
9
12
13
14
15
16
10
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
17
Display
Volume Control
Tuning Up/Minute Button
Display Low/High Button
Radio On/Off Button
Alarm On/Off Button
Display (12/24hr) Switch
AM/FM Band Button
Radio Preset Up Button
Battery Compartment (Bottom
of Unit)
11.
12.
13.
14.
15.
Snooze Button
Clock Set/Alarm Set Button
Tuning Down/Hour Button
Sleep Button
Radio Preset Set/Disney Alarm
Type Button
16. Alarm Type Button
17. FM Antenna Wire (Bottom of
Unit)
DISPLAY
A B C DE F
AM
PM
kHz
MHz
AM
FM
GH
I
J
KL
A. Snooze
B. Time
C. Alarm On
D. Radio (Alarm)
E. Music (Alarm)
F. Preset
G. Sleep
6
H. AM/FM
I. Clock and
Timer
J. Preset Number
K. MHz/kHz
L. AM/PM
DCR5000.O/M.QXD
1/28/03
7:21 AM
Page 7
INSTALLATION
Ð
+
Ð
+
Unravel the AC cord and connect it to a
conveniently located AC outlet having 120V
and 60Hz only. The Clock Display will
AC Outlet
illuminate and “0:00” or “12:00” will blink in
the window.
NOTE: If the AC plug does not fit into a
AC Plug
nonpolarized outlet, do not file or cut the
wide blade. It is the user’s responsibility to have an electrician replace the
obsolete outlet.
If the AC cord is disconnected or if there is a power failure, this electronic
clock is designed to continue operating internally (without showing the time
on the Clock Display) with two (2) AAA size batteries (not included).
To install the batteries:
• Remove the battery compartment door by inserting a
small screwdriver, paper clip or similar item into the tab
while gently pushing to remove.
• Insert two (2) AAA size batteries into the battery
compartment. Be sure to observe the polarity markings
which are engraved inside the battery compartment. If the
batteries are inserted incorrectly, the unit will not operate.
• Replace the battery compartment door.
Be sure to check the condition of the batteries periodically by disconnecting
the AC cord and connecting it again two or three minutes later. The preset
times should continue operating. If the present time does not appear, it
indicates the battery is dead or not connected properly.
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated next
to the battery compartment. Reversed batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or
old batteries with fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to
prevent damage or injury from possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat
and rupture. (Follow battery manufacturer’s directions.)
7
DCR5000.O/M.QXD
1/28/03
7:21 AM
Page 8
OPERATION
TO LISTEN TO THE RADIO
1
2
2
1
1
2
Press the Radio On/Off button ❶ to
turn the unit on; the AM or FM
indicator will light. Press the AM/FM
Band button ❷ to select AM or FM.
3
2
1
Tune a station by pressing the Tuning
Up/Minute ❶ or Tuning Down/Hour ❷
button. Press and hold either button
and the unit will scan and stop on the
next strong station.
SETTING RADIO PRESETS
(10 FOR EACH BAND)
1
1
Adjust the volume using the Volume
control ❶.
Press the Radio On/Off button ❷ to
turn the unit off.
2
Tune a station as described in steps
1 and 2 above, then press the Radio
Antennas
Preset Set/Disney Alarm Type button
FM: Extend the FM antenna wire ❶ once; the Preset Number will blink.
(located in the battery compartment) Press the Radio Preset Up button ❷
for best reception.
to select a radio preset number, then
press the Radio Preset Set/Disney
AM: Turn the unit for better AM Alarm Type button ❶ again to confirm
and the radio preset will be set.
reception.
8
DCR5000.O/M.QXD
1/28/03
7:21 AM
Page 9
OPERATION (CONTINUED)
TO RECALL RADIO PRESETS
TO USE THE 12/24 HOUR SWITCH
1
1
To recall a Radio Preset, press the
Radio Preset Up button repeatedly
until the desired Radio Preset
appears in the display.
To set this unit for standard 12 hour
clock format, slide this switch to the
12HR position. To set the clock for
“military time”, slide it to the 24HR
position.
NOTE: Once a radio frequency is selected, the display will revert to the time
display after 10 seconds.
TO SET OR RESET THE ACTUAL TIME
1
2
With the unit off, press the Clock
Set/Alarm Set button once to set
the time; the Time indicator will light
and the display will blink.
1
3
2
Press the Tuning Down/Hour button
❶ to set the hour and the Tuning
Up/Minute button ❷ to set the
minute. Make sure the appropriate
AM/PM indicator is lit if using the 12
hour mode. Wait 10 seconds, or
press the Clock Set/Alarm Set button
❸ twice and the time will be set.
9
DCR5000.O/M.QXD
1/28/03
7:21 AM
Page 10
OPERATION (CONTINUED)
TO SET OR RESET THE ALARM TIME
1
2
With the unit off, press the Clock
Set/Alarm Set button twice to set
the alarm time; the Alarm On
indicator and the display will blink.
1
3
2
Press the Tuning Down/Hour button
❶ to set the alarm hour and the
Tuning Up/Minute button ❷ to set
the alarm minute. Make sure the
appropriate AM/PM indicator is lit if
using the 12 hour mode. Wait 10
seconds, or press the Clock
Set/Alarm Set button ❸ again and
the time will be set.
TO SET THE ALARM TO WAKE TO RADIO
1
2
Set the alarm time as previously
instructed. Select a radio station as
described on page 8 and make sure
the Volume control is set as desired.
NOTE: To avoid having the volume
set too low that it cannot be heard
when the alarm sounds, this unit will
automatically set the volume to a
preset level as needed.
Press the Alarm On/Off button and
the Alarm On and Radio (Alarm)
indicators will light. When the actual
time matches the selected preset
alarm time, the radio will
automatically turn on.
To shut off the alarm, see TO SHUT
THE ALARM OFF section on the
next page.
10
DCR5000.O/M.QXD
1/28/03
7:21 AM
Page 11
OPERATION (CONTINUED)
TO SET THE ALARM TO WAKE TO DISNEY ALARM MUSIC
1
2
2
Press the Alarm Type button ❶
repeatedly to cycle through the five
Disney alarm choices. Press the Radio
Preset Set/Disney Alarm Type button ❷
to confirm.
When the actual time matches the
selected preset alarm time, the selected
tone will play.
To shut off the alarm, see TO SHUT
THE ALARM OFF section below.
Set the alarm time as previously
instructed. Press the Alarm On/Off
button and the Alarm On and Radio
(Alarm) indicators will light.
NOTE: To avoid having the volume
set too low that it cannot be heard
when the alarm sounds, this unit will
automatically set the volume to a
preset level as needed.
TO SHUT THE ALARM OFF
1
SNOOZE
1
1
To shut the alarm off, press the Alarm
On/Off button once to turn off the alarm
and not set it for the next day. Press
the Alarm On/Off button again until the
Alarm On indicator lights and the alarm
time will be reset for the next day.
The alarm can be temporarily
turned off manually by pressing the
Snooze button; the alarm will turn
back on automatically 10 minutes
later. The Snooze indicator will
light when Snooze is activated.
11
DCR5000.O/M.QXD
1/28/03
7:21 AM
Page 12
OPERATION (CONTINUED)
TO ACTIVATE THE SLEEP FUNCTION
1
2
Tune the desired radio station as
described on page 8. Press the
Sleep button; the Sleep indicator will
light and “10” will appear on the
clock display, then release the
button. The unit will turn on for 10
minutes and then turn off.
To adjust the sleep time up to 90
minutes in 10 minute intervals,
repeatedly press the Sleep button.
DISPLAY LOW/HIGH
3
1
To cancel Sleep, press the Radio
On/Off button.
This unit has two levels of
brightness for the display.
Repeatedly press the Display
Low/High button until the desired
brightness appears in the display.
12
DCR5000.O/M.QXD
1/28/03
7:21 AM
Page 13
TROUBLESHOOTING GUIDE
Should this unit exhibit a problem, check the following before seeking service:
SYMPTOM
POSSIBLE
CAUSE
POSSIBLE
SOLUTION
GENERAL
Power does
AC line cord not
Insert plug firmly
not come on.
plugged in.
into AC outlet.
Radio On/Off button
Press the Radio On/Off
RADIO
No sound.
was not pressed.
button to turn the unit on.
Volume control at
Increase the volume.
minimum position.
Noise or sound
AM - Interference from
Turn the radio for
distorted on AM
traffic.
better AM reception.
or FM.
FM - Antenna Wire
Extend Antenna Wire.
not extended.
CLOCK
Flashing time.
Batteries connected
Check the batteries
improperly, not con-
and replace if
nected or dead.
necessary.
Clock not set.
Set the clock.
Alarm does not
Alarm On/Off button
Press the Alarm On/Off
turn on.
is not pressed.
button until the Alarm
On indicator lights.
Clock is not set.
Set the clock.
Alarm time not set.
Set alarm time.
13
DCR5000.O/M.QXD
1/28/03
7:21 AM
Page 14
For additional set-up or operating assistance, please visit our website
at www.memorexelectronics.com or contact customer service at 1-877DISNYCE (1-877-347-6923).
Please keep all packaging material for at least 90 days in case you need
to return this product to your place of purchase or Memcorp.
For parts and accessories, contact Fox International at 1-800-321-6993.
Distributed by Memcorp Inc., Weston Fl
Disney Elements © Disney 2003.
Download PDF