COAL 0383 CICA9000

COAL 0383 CICA9000
CICA90002009:COAL 0383 CICA9000
5/8/2009
11:25 AM
Page 1
MADE IN THE USA
Ball Valves
Butterfly Valves
Automation Products
Pipeline Strainers
Backflow Preventers
Plumbing and Heating Products
Safety Relief Valves
ALL PRODUCTS BROCHURE
CICA90002009:COAL 0383 CICA9000
5/8/2009
11:26 AM
Page 2
All Products Brochure
A History Of
Service And
Innovation
Now in its ninth decade, Conbraco Industries, Inc. is a leading manufacturer of flow control
products for U.S. and international markets. The company is based in Matthews, NC.
Conbraco has a history of new product development and innovation that dates back to the
company’s inception in 1928. Today, the Conbraco line of products includes ball valves;
butterfly valves; backflow prevention devices; ground key cocks for gas, air, gasoline, steam
and water; safety relief valves; water gauges; pipeline strainers; vacuum breakers; valve
actuators and more.
Conbraco’s vertically integrated manufacturing ensures a consistency of production, testing,
quality and availability. It’s your assurance that Conbraco flow control products will deliver longterm performance advantages. All Conbraco plants are registered to ISO 9001 quality standards.
The Conbraco line continues to expand — with new products, designs and advanced materials
— to better serve the needs of our customers in chemical processing, pulp and paper,
petroleum, residential and commercial plumbing and heating, manufacturing and other markets.
Air And Gas Cocks
Automation Products
Backflow Preventers
Ball Valves
Butterfly Valves
Check Valves
Pipeline Strainers
16
9-11
11-14
16
8
16
Mixing Valves
6-7
Safety And Relief Valves
3-4
Top Entry Ball Valves
2
5-6
15
Vacuum Breakers
8
Water Gauges
5
Water Pressure
Reducing Valves
8
Y Strainers
9
PAGELAND
BRONZE FOUNDRY AND
MANUFACTURING PLANT
CONWAY
STEEL FOUNDRY AND
MANUFACTURING PLANT
PAGELAND
FINAL ASSEMBLY AND
DISTRIBUTION CENTER
MATTHEWS
HEADQUARTERS
Customer Se rvice 1-704 -841-6 000
CICA90002009:COAL 0383 CICA9000
5/8/2009
11:26 AM
Page 3
All Products Brochure
Model No. RVW10 Series
Model No. RVS14 Series
Brass/bronze safety relief valves protect ASME
Section IV hot water heating boilers and
hydronic heating systems.
High-capacity design
features corrosionresistant construction.
Brass, satin or polished
chrome finishes available.
Set pressures 20 to 60
psig @ 250°F. Sizes 3/4"
and 1", male and female
inlet connections.
High-capacity safety valves for ASME Section
IV low pressure steam heating boilers. One
piece cast bronze body
features top guided
design, chrome-plated
seat and PTFE-faced
soft seat. Optional test
gag available permits
hydrostatic testing. Set
pressures 5 to 15 psig @
250°F. Sizes 2", 2-1/2"
and 3".
Model No. RVS/RVW Series
Model No. RVA14 Series
Part No. 10-100, 10-200,
10-300, 10-400 Series
Part No. 10-512/10-322 Series
Compact ASME Section VIII steam service
safety valves feature stainless steel springs
and elastomer soft
seating for dependable
operation. Standard
equipment on steam
sterilizers, cookers and
kettles. Brass, satin or
polished chrome finishes.
1/2" model available with
stainless steel wetted
trim. Set pressures to 60
psig @ 312°F. Sizes 1/2"
and 3/4".
Part No. 14-200 Series
Safety And
Relief Valves For
Steam,
Air And Gas
Model No. RVG16 Series
Part No. 14-400 Series
Part No. 16 Series
High-volume air relief valves designed for low
pressure non-code air and gas service. Rugged
bronze construction
features elastomer soft
seating and Teflon® coated
discs for dependable
operation. Used to protect
low pressure compressors
and tanks, high-volume
blowers, and pneumatic
conveying systems.
Pressure settings from 4
to 22 psig @ 400°F. Sizes
2", 2-1/2" and 3".
Economical relief valves for general purpose noncode overpressure protection and bypass relief
applications. Applications include liquid bypass or
thermal expansion relief of
well pumps, tanks, fire
protection systems and all
types of water or liquid piping
systems. Pressure settings.
Bronze bodies, stainless
steel springs and soft
seating. Standard pressure
settings from 50-175 psi.
Sizes 1/2" and 3/4".
Model No. RVW60 Series
Model No. RVV14 Series
Part No. 14-600 Series
Part No. 16-503, 16-504 Series
Heavy-duty bronze safety relief valves protect
ASME Section IV hot water heating boilers and
hydronic heating systems.
High-capacity design
features corrosion-resistant
construction, isolating
diaphragm and elastomer
soft seats. Set pressures
15 to 160 psig @ 250°F.
Available with standard or
expanded outlet, sizes 3/4"
through 2".
High-volume vacuum relief valves feature one
piece cast bronze bodies, Teflon® coated
discs and elastomer soft
seating to provide
accurate and dependable
operation. Relief settings
from 8 to 30" Hg @
400°F. Sizes 2", 2-1/2"
and 3".
Calibrated pressure relief valve allows for in-line
pressure adjustments without the need for
pressure gauge. Provides
static overpressure
protection for liquid filled
systems such as well
pumps, tanks, fire
protection systems. Preset
at 100 psig. Adjustable in
25 psig increments from
50 to 175 psig. Bronze
body. Inlet sizes 1/2" to
3/4". Outlet Size: 1/2".
Part No. 10-600 Series
Model No. RVS12 Series
Model No. RVA15 Series
Model No. RVG16C Series
Model No. RVG16A Series
Part No. 12 Series
Part No. 15 Series
Part No. 16-501 Series
Medium capacity safety valves protect ASME
Section IV low pressure steam heating boilers.
Cast bronze, full nozzle
design features PTFE
faced elastomer soft
seating for dependable
operation. Set pressures
5 to 15 psig @ 250°F.
Sizes 2", 2-1/2" and 3".
OEM-style brass barstock safety valves for air
and gas service. ASME Section VIII certified.
Used to protect air
compressors, receivers,
and instrument air
systems. Stainless steel
springs and elastomer soft
seating provide superior
seat tightness and
vibration resistance. Set
pressures to 250 psig
@ 325°F. Sizes 1/4", 3/8",
1/2", 3/4" and 1".
Adjustable relief valves protect equipment by
providing low volume liquid relief or bypass
control. Excess volume
may be discharged back
to the low pressure
source. Ideal for
agricultural sprayers and
simple commercial or
industrial pressurized
systems. 125 psig
standard set pressure;
adjustable by-pass relief
valve available.
Size 1/2".
www.apollova lves .com
3
CICA90002009:COAL 0383 CICA9000
5/8/2009
11:26 AM
Page 4
All Products Brochure
Safety And Relief
Valves For Steam,
Air And Gas
Model No. RVW17 Series
Part No. 17 Series
Bronze pressure-only relief valves protect
plumbing systems, storage tanks and tankless
coil water heaters from
excessive pressure. CSA
certified design conforms to
HUD/FHA requirements. 3/4"
model is ASME Section IV
certified from 75 - 150 psig.
Stainless steel springs and
elastomer soft seats are
standard. Set pressures to
160 psig @ 250°F. Sizes
1/2" and 3/4".
Model No. TPR Series
Part No. 18C-400 Series
Residential T & P relief valves protect hot water
heaters from excessive pressure
and temperatures. CSA certified
design conforms to HUD/FHA
requirements. 3/4" model is
ASME Section IV certified at 125
and 150 psig settings. Choice of
element lengths. Available with
extended body length to suit
water heaters with extra thick
insulation. Set pressures to
150 psig @ 210°F. Sizes 1/2"
and 3/4".
Model No. TPC Series
4
Model 29 Series
Model 510/520 Series
Compact OEM-style bronze safety valves for
steam, air/gas service. ASME Section I and VIII
certified for use on steam
boilers, sterilizers, pressure
vessels and cookers. Standard
features include stainless steel
springs, tapped drain
connections and patented
Teflon® soft seat for superior
seat tightness. Optional
stainless steel wetted trim. Set
pressures to 200 psig @ 406°F.
Sizes 3/8" through 1-1/4".
High-performance bronze safety relief valves are
ASME Section VIII certified for steam, air/gas and
liquid service. Rugged top-guided
full nozzle design features flat
lapped metal seating, self aligning
disc insert and a lower control
ring for exceptional performance
and durability. Available with
choice of brass or stainless steel
trim. Wide range of options
includes elastomer
O-ring or PCTFE soft seating and
cryogenic preparation. Set
pressures to 1200 psig @ 422°F.
Sizes 1/2" through 2".
Model 119 Series
High-capacity cast iron flanged safety valves for
steam or air/gas service. ASME Section I and
VIII certified. Used to protect
steam boilers, pressure
vessels and pressure piping
systems. Rugged top-guided
design features flat lapped
metal seating and two ring
control for repeatable
performance and extended
service life. Stainless steel
wetted trim standard. Set
pressures to 250 psig @
450°F. Sizes 1-1/2" through 6".
Model DPE Series
Cast iron drip pan elbows connect to the
discharge outlet of steam service safety
valves to safely direct the
steam discharge and
condensate away from the
valve. Isolates the valve
from piping stresses which
can adversely affect valve
performance. Sizes 3/4"
through 8", threaded and
flanged connections.
Part No. 18C-500 Series
Model 19 Series
High-capacity commercial T & P relief valves
protect hot water heaters from excessive
pressure and temperatures.
CSA certified design conforms
to ASME Section IV and
ANSI Z21.22 requirements.
Corrosion-resistant all-bronze
body, isolating diaphragm and
screw-in cage that eliminates
rusting steel screws. Stainless
steel springs and thermostats.
Choice of element lengths.
Set pressures to 150 psig @
210°F. Sizes 3/4" through 2".
Bronze high-capacity safety valves for steam or
air/gas service. ASME Section I and VIII
certified. Protects steam boilers,
pressure vessels and pressure
piping systems. Standard
features include stainless
steel springs, tapped drain
connections and Teflon® soft
seat for superior performance.
Metal to metal seating and
stainless steel trim options
available. Set pressures to
300 psig @ 422°F. Sizes 1/2"
through 2-1/2".
Customer Se rvice 1-704 -841-6 000
Model 530 Series/540 Series
High-performance industrial safety relief valves feature
carbon steel or all stainless steel construction. ASME
Section VIII certified for steam,
air/gas and liquid service. Rugged
top-guided full nozzle design features
flat lapped metal seating, self aligning
disc insert and a lower control ring for
exceptional performance and
durability. Wide range of options
includes elastomer O-ring or PCTFE
soft seating and cryogenic
preparation. Set pressures to 1200
psig @ 800°F. Sizes 1/2" through 2".
Model No. FWR Series
Part No. 35 Series
Bronze feed water pressure regulators;
individually set at 15 psig; adjusts from 10
to 25 psig; fast fill feature;
high-capacity; screw in
bonnet; in-line stainless
steel strainer; 210°F max.
temperature; max.
pressure: 100 psig; 1/2"
union threaded, threaded
and solder connections.
Model No. VRV Series
Part No. 37 Series
Brass or bronze vacuum relief valves; max.
temperature: 250°F; Max. water pressure:
200 psig. CSA certified.
Sizes: 1/2" and 3/4".
CICA90002009:COAL 0383 CICA9000
5/8/2009
11:26 AM
Water Gauges
Model No. WG Series
Part No. 20 Series
Rough bronze water gauges;
aluminum or composition
wheel; needle drain valve in
lower arm; ball checks
(optional) prevent operator
scalding in case of glass
breakage: chain lever and
expansion tank models
available. Sizes: 3/8", 1/2"
and 3/4".
Model No. WG1E, WG2E Series
Part No. 21 Series
Page 5
All Products Brochure
Model No. WG239, WG35 Series
Part No. 24 Series
Rough bronze direct reading
water gauges; ASME
automatic or non-automatic
models available; also
available with chain lever;
ball valve drain. Sizes: 1/2"
and 3/4".
Water Gauges,
Boiler Drains,
Air And
Gas Cocks
Model No. WG2P, WG3P,
WG3SP Series
Part No. 25 Series
Rough bronze water gauges
with extended shank; 1-3/4"
shank length; aluminum or
composition handle. For 1/2"
pipe size.
Polished bronze and chrome
plated water gauges;
aluminum or composition
wheel; needle drain valve
in lower arm; non-automatic
and automatic models; chain
lever available. Sizes: 3/8"
to 3/4".
Model No. WG3S, WG6S Series
Model No. AC Series
Part No. 41 Series
Part No. 23 Series
Stainless steel direct reading
water gauges; max. working
pressure: 500 psig (subject to
limitation of gauge glass);
aluminum or composition
wheel; stainless steel ball
valve drain in lower arm;
non-automatic, automatic,
ASME automatic and
expansion tank models. Sizes:
1/2" and 3/4".
Polished and satin brass air cocks; with
“tee” handle or lever handle; spring and
nut bottom with
wide range of
connections available.
Boiler Drains
Model No. DV/WHDV Series
Part No. 31 Series
Rough bronze drain valves
for water heaters or heating
boilers; pressure
rated to 200 psig.
Shank lengths 5/8"
to 3-1/2". Pipe
sizes: 1/2" and
3/4".
www.apollova lves .com
Air And
Gas Cocks
94 MBV SERIES:
Mini Ball Valve. Competitive, conventional
port valves, constructed of heavy-duty forged
brass, with 100% Teflon®
seats and gland follower
with double Viton o-rings
to prevent stem leakage.
Reversible handle for tight
space applications. CSA
1/2 psig and ASME 2 and
5 psig gas ratings. Rated to
600 psig at 100°F.
Operating temperatures
from -40°F to 300°F.
Sizes 1/8" and 1/4".
5
CICA90002009:COAL 0383 CICA9000
5/8/2009
11:26 AM
Page 6
All Products Brochure
Air And
Gas Cocks,
Mixing Valves
Part No. GB-15, GB-16 Series
Model No. GCA Series
Model No. GBV Series
Part No. 54 Series
Gas hose-end shut-off valves; 1/8'' NPT
or standard tube sizes; capacity: 56,500
Btu/hour. Pipe
sizes: 3/8"
to 3/4".
Model No. GCP Series
Part No. 56 Series
Pilot gas cocks; 1/2 psig for 32°F to 125°F
service; CSA design certified.
1/8" MNPT x
various 1/4" tube
connections.
6
Model No. GBVU, GBVA Series
These gas appliance ball valves are
designed for natural gas, manufactured
and mixed gas,
liquefied petroleum
gases and LP
gas-air mixture
applications. They
comply with the
latest editions
of ANSI, CSA, and
UL published
standards.
Part No. GB-10 Series
CSA design-certified
manual shut-off
ball valves for many fuel
types; for up
to 5 psig. Capacities:
300,000 to 1.1 million
Btu/hour. Standard female
x female threaded
connection. Sizes: 3/8"
to 1".
Model No. GBVB Series
Part No. GB-50 Series
UL and CSA design-certified manual
gas shut-off ball valves for many fuel types
for up to 5 psig.
Standard female
threaded connections.
Available with single
or dual tapped gas
ports.
Sizes: 1/2" to 2".
Customer Se rvice 1-704 -841-6 000
Mixing Valves
Model No. MVA - MVH Series
Part No. 34A-34H Series
Thermostatic Mixing Valves. 34A Series ASSE
1017 certified Point of Source mixing valves are
designed for hot water distribution systems; 34H
Series are designed for radiant heat applications, to
provide better control of hot water supply. Numbered
indicator control allows easy setup and fingertip
control. Available in low or high temperature range
options depending
on application.
Integrated check
provides added
protection of
thermostat and cross
connection control.
Model No. MVB Series
Part No. 34B Series
Scald Protection Mixing Valves. 34B Series ASSE
1016 certified Point of Use mixing valves are designed
to be used for individual
fixtures for flow as high as
11 GPM. These valves
use a thermostatic
element that senses outlet
temperature and will
compensate for fluctuating
inlet temperature and
pressure. The mixed
water temperature range
is 85°-120°F and will hold
a desired temperature
within +/-3°F at all times.
The 34B also has an
adjustable temperature
limit stop to prevent the
valve from being set
above 120°F.
CICA90002009:COAL 0383 CICA9000
5/8/2009
11:26 AM
Page 7
All Products Brochure
Specialty Valves
Model No. MVC Series
Part No. 34C Series
Commercial High-Capacity Mixing Valves.
34C Series ASSE 1017 listed, high-capacity
mixing valves are
thermostatically
controlled regulating
valves designed for use
in large commercial
potable and non-potable
hot water systems.
Simple adjustment of
water temperature from
90°-140°F or 130°-180°F.
Model No. MVD Series
Part No. 34D Series
“Point of Use” Mini-Mixer Thermostatic
Valves. 34D ASSE 1016 and 1070 certified
mixing valves are designed to throttle both the
hot and cold water inlet
supplies to compensate for
temperature and pressure
fluctuations. The mixed water
temperature range is 85°120°F and will hold a desired
temperature within +/- 2°F at
all times. The 34D has built
in check valves, thermal
actuator protection and an
adjustable temperature limit
stop to prevent the valve
from exceeding 120°.
Available with cold water bypass option.
Specialty Valves
Model No. FCV Series
Part No. 35-FC Series
Bronze Body flow check provides positive gravity
shut-off in hydronic systems. Convenient override
permits continuous
circulation or drainage when
required. Available with NPT
or sweat connections, NPT
models are both angle and
horizontal checks. Expansion
tank may be installed on the
angle check. Maximum
temperature is 250˚F.
Max. pressure is 125 psig.
Apollo® PBS Series
Purge, balance and shut-off valve; has solid
brass “can’t lose” cap and chain; hose thread
connection
for blow off and easy
purging; maximum
temperature: 250°F;
maximum pressure:
600 psig CWP in open
position.
Model No. HCB Series
Part No. 58 Series
Balancing valves for hydronic flow control;
150 psig rating. Copper tube sizes: 1/2"
and 3/4".
Model No. EXV Series
Part No. 78-RV Series
Water heater shutoff/thermal expansion
control valves provide both water heater
shutoff and code
required thermal
expansion protection.
The 78-RV combination
valves are offered in
three pressure settings,
125, 100 and 80 psig.
Available in 3/4" and 1"
sizes with sweat,
threaded and pex
connections. CSA and
IAPMO listed.
Model No. MVHL Series
Part No. 34HL Series
Multiple-Fixture Hi-Lo
Mixing Valve. Fully ASSE
1069 and 1017 compliant, the
34HL Series protects against
scalding and thermal shock by
providing ±5° output
temperature control for multiple
fixtures in commercial and
institutional settings. Patented
design eliminates “dead-zones.
Made in USA.
www.a pollovalve s.com
7
CICA90002009:COAL 0383 CICA9000
5/8/2009
11:26 AM
Page 8
All Products Brochure
Pressure
Reducing Valves,
Vacuum Breakers,
Check Valves
Water Pressure
Reducing Valves
Model No. PRV Series
Part No. 36 Series
All bronze construction. Supply pressures to 300
psig; standard outlet range 25 to 75 psig; other
pressures available. Max.
working temperature of 180°F.
Bronze body; replaceable
cartridge; built in by-pass;
high-capacity stainless steel
strainer. Many end connection
options, union pipe end
standard. Meets ASSE, CSA
and ANSI standards and is listed with IAPMO.
Sizes: 1/2" to 2".
Model No. PRVC Series
Vacuum
Breakers
Compact and corrosion-resistant. Supply
pressures up to 400 psig; built-in by-pass relieves
excessive pressure buildup.
Working temperatures to
180°F; 50 psig standard
factory setting; easy screw
adjustment. Meets ASSE,
CSA and ANSI standards and
is listed with IAPMO. FNPT,
sweat union, PEX union or
FNPT union connections
available. Sizes: 1/2" to 1".
Ball cone check valves in bronze (to 3") and
316 stainless steel (to 2"). Reinforced PTFE
ball cone check provides excellent chemical
and corrosion resistance
and requires no radial
alignment. Standard
connection for bronze is
FNPT (to 3"), Male x
Female (to 2"). For
stainless steel,
FNPT only.
Economical, lightweight and compact
protection against back-siphonage and low
hazard cross connections.
Meets ASSE and CSA
standards; listed with IAMPO.
For hot and cold water service
up to 212°F at 125 psig for 1";
and up to 180°F at 125 psig for
1/4"-2".
Super-capacity pressure reducing valves for
heavy-duty applications. Complies with
ASSE and CSA standards
and is listed with IAPMO.
Bottom clean-out plug for
easy in-line servicing; NPT
connection standard; Flanged
connections available on 2”,
2-1/12” and 3” sizes.
Strainers optional. Sizes:
1/2” to 3”.
Part No. 38-502 Series
Potable water backflow protection for lab
faucets, community sinks, beauty salons,
barber shops. ASSE, CSA
approved; IAPMO listed.
Brass body, polished
chrome plating, stainless
steel internal parts. 3/8"
FNPT standard; 1/4"
optional. Adapters
simplify installation.
8
Part No. 61, 62 Series
Model No. PRVH Series
Model No. LFVB Series
Model No. CVS, CVB Series
Part No. 36C Series
Model No. AVB1 Series
Part No. 38-100 Series
Check Valves
Part No. 36H Series
A127 SERIES
Apollo control valves are ideal for a wide
range of commercial and industrial
applications,
wherever the flow,
pressure or level of
liquids needs to be
controlled.
Hydraulically operated
diaphragm main valve
automatically controls
non-corrosive, nonabrasive fluids by means of a wide range of
pilots.
Customer Se rvice 1-704 -841-6 000
Model No. CVBE/CVSE Series
Part No. 61-500/62-500 Series
Bronze check valves with standard EPR or
optional Nitrile seat for bubble-tight shut off to
2". Stainless steel check
valves with fluorocarbon
seat to 1". Optional 5 and
10 psig cracking pressure
through size 1". Standard
connection for bronze is
FNPT, bronze sweat
connection available to
1", for stainless steel
FNPT only.
Model No. CV Series
Part No. 61-700 Series
Ideally suited for all OEM applications
where space is a premium. Excellent for
use on water and
air. They feature a
bubble-tight soft seat
design with a very
light loaded stainless
steel spring.
CICA90002009:COAL 0383 CICA9000
5/8/2009
11:26 AM
Page 9
All Products Brochure
Y Strainers
Apollo® International
Strainers
Model No. YSB Series
Part No. 59 Series
Cast bronze body with 304 stainless steel
screen; 400 psig rating; wide variety of
mesh screens
available; optional
blow-out plug tapping.
Sizes: 1/8" to 4". UL
listed available on
sizes 1/8” - 1/2”.
Model No. YSBS Series
Part No. 59-300 Series
Model No. 125 YF/250 YF Series
Flanged ductile iron bodies with 304 stainless
steel screens. Sizes from 2” to 16” and
pressure ratings
from 150 psig to
500 psig. Screen
cover has a tapped
and plugged blowoff connection.
Model No. YCS Series
Compact corrosion-resistant bronze solder
end Y-strainers with stainless steel screens.
Generous socket
wall thickness
assures highstrength solder
joints; pressures
to 400 psig.
Sizes: 1/2" to 2".
FNPT cast carbon steel body with 304
stainless steel screen Rated at 600 psig
@839°F steam and
1480 psig at 100°F
water, oil, or gas.
Screen cover is NPT
tapped for blow-off
connection.
Model No. MSB Series
Model No. YCT Series
Part No. 59-V Series
Ideal for OEM applications where space is
a premium. Corrosion-resistant body and
cleanout cap with
standard 50 mesh
stainless steel screen.
Other screen sizes
available. Rated 400
psig at 210°F WOG
and 125 psig at 400°F
WSP. Sizes: 1/4" NPT.
Class 250 FNPT cast iron body with 304
stainless steel screen. Rated a 250 psig at
406°F steam and
400 psig at 150°F
water, oil, or gas.
Screen cover is NPT
tapped for blow-off
connection.
Y Strainers &
Backflow Preventers
Backflow Preventers
Model No. 4A-DC Series
Part No. 4A-100 Series
Bronze body double check assembly with top
access check valves and test cocks. Features
captured
spring
cartridges
and Apollo
ball valve
shutoffs with
stainless
steel trim. Contact local representative or
factory for approvals. Sizes 1/2” - 2”.
Model No. DC40 Series
Part No. 40-100 Series
Sizes 1/2" to 2": Bronze body double check
valves with Celcon® poppets and stainless
steel springs. Full
USC-FCCC&HR,
AWWA, ASSE, CSA
approvals; and
IAPMO listed. UL
classified and FM
approved models.
Model No. DC4SG Series
Part No. 4SG-100 Series
Model No. YSS Series
Cast CF8M stainless steel body with 304
stainless steel screen.
Rated at 600 psig for
1124°F steam and 1440
psig for CWP. Screen
cover is NPT tapped for
blow-off connection
www.apollova lves.com
Double Check Valves in sizes 2 1/2" - 8".
(10”-DC4S) Light-weight, short lay length,
low head loss, with individual access to the
check valves.
FDA-approved
epoxy-coated
ductile iron.
Available shut-offs:
monitored butterfly
valves with
supervisory switch,
OS&Y and NRS
gate valves. Horizontal and vertical
installation approvals.
9
CICA90002009:COAL 0383 CICA9000
5/8/2009
11:26 AM
Page 10
All Products Brochure
Backflow
Preventers
Model No. 4A-RP Series
Model No. DUC4N Series
Part No. 4N-300 Series
Bronze body dual check with two captured
spring cartridges. ASSE and CSA approved for
residential backflow
protection at the water
meter. Multiple
connection
combinations.
Sizes 3/8” - 1”.
Part No. 4A-200 Series
Model No. DUC-4FP Series
Bronze body reduced presure backflow
assembly with top access check valves and
test cocks.
Features
captured
spring
cartridges
and Apollo
ball valve
shutoffs with
stainless steel handles and trim. Contact local
representative or factory for approvals. Sizes
1/2” - 2”.
Bronze body dual check with two captured
spring cartridges. ASSE, CSA approved and UL
classified for residential
fire sprinkler systems.
Sizes 1”, 1-1/4”.
Model No. RP40 Series
Part No. 40-200 Series
Bronze body reduced pressure valves with
Celcon® poppets and stainless steel springs.
USCFCCC&HR,
ASSE, CSA
approved,
AWWA, UL
classified and
IAPMO listed.
Sizes 1/4” - 2”.
*Also available
in SS sizes
1/4” - 1”.
Model No. DCAP Series
Part No. 40-400 Series
Bronze body dual check with atmospheric
port. Noryl® poppets and stainless steel
springs. ASSE and
CSA approvals.
Sizes: 1/2" and 3/4".
Model No. PVB4V Series
Part No. 4V-500 Series
Pressure vacuum breaker protects
irrigation systems from freeze damage.
Designed with plastic
float and integral relief
valve for freeze
resistance; Apollo® ball
valves standard.
Max. working
pressure: 150 psig.
USC-FCCC&HR,
ASSE, and CSA
approvals.
Sizes 1/2" to 2".
Model No. SVB4W Series
Part No. 4W-500 Series
Spill-resistant pressure vacuum breaker (SVB) is
designed to prevent contamination of potable water
due to back-siphonage and
is ideally suited for indoor
and OEM applications
supplied
with continuous pressure
where water discharge could
cause problems. Full USCFCCC&HR, ASSE, and
CSA approvals. Sizes: 1/4"
to 1/2" Noryl Body.
Model No. DCDA4SG Series
Part No. 4SG-600 Series
Double Check Detector Assembly in sizes 2 1/2" – 8".
(10”-4S-600) Light-weight for ease of installation in fire
or automatic sprinkler systems. Provides precise
monitoring capability to
detect leakage or
unauthorized water
usage. Available shut-offs:
monitored butterfly valves
with supervisory switch
and resilient-seated
OS&Y gate valves.
Vertical and horizontal
approvals.
Model No. RP40 Series
Model No. 4A-PVB Series
Model No. RPDA40 Series
Sizes 2-1/2" to 10": Fusion epoxy coated
ductile iron body; 85-5-5-5 replacement seats
and stainless
steel springs.
Full USCFCCC&HR,
AWWA,
ASSE, CSA,
and FM
approvals and
IAPMO listed.
UL classified.
Bronze body pressure vacuum breaker with
internal freeze relief valve and captured
spring cartridge.
Features Apollo
ball valve
shutoffs with
stainless steel
handes and
trim. Contact
local
representative
or factory for
approvals.
Sizes 1/2” - 2”.
Reduced presure detector assembly. Detects
unauthorized use of water in fire and sprinkler
systems. Ductile iron
body is epoxy coated
with bronze metered
bypass. Working
pressures to 175
psig; operating
temperatures: 33˚F
to 140˚F. Approved
ASSE 1047, FM, UL
Classified, USC’s
FCCC&HR.
Sizes: 3" to 10".
Part No. 40-200 Series
10
Part No. 4A-500 Series
Customer Se rvice 1-704 -841-6 000
Part No. 40-700 Series
CICA90002009:COAL 0383 CICA9000
8/17/2009
11:59 AM
Page 11
All Products Brochure
Standard Apollo®
Ball Valves
Model No. CBBP Series
Part No. 4C-100 Series
ASSE 1022-approved carbonated beverage backflow
preventer. Protects against copper poisoning by
preventing carbonated water
from being drawn into copper
pipes. All wetted components
are non-toxic, corrosion
resistant, and approved
for use with potable water.
Suitable for supply pressures
to 150 psig and water
temperatures from 33˚ to 130˚F. CSA-certified to
NSF61. IAPMO approved. Sizes 1/4" and 3/8".
Model No. TKU Series
Backflow Test Kit
Apollo® three and five-valve test kits are
lightweight and portable. They come equipped
with a gauge,
hoses and all
required fittings
in a protective
molded plastic
case. For DCV,
RPZ, DVB and
SVB backflow
preventers.
New - Apollo now offers test kit calibration
Apollo Added Value
Apollo backflow prevention products are
designed, manufactured and individually tested
in Conbraco Industries South Carolina, USA
facilities.
Standard Ball Valve Ratings
Bronze Valves: 600 psig CWP, Cold, Non-shock.
(Exceptions: 3-way and Saturn valves) 150 SWP.
Stainless Steel Valves (76 & 96 Series):
1/4" through 1": 2,000 psig CWP
1-1/4" through 2": 1,500 psig CWP
Carbon Steel Valves (89 and 93 Series):
1/4" through 1": 2,000 psig WOG, 1-1/4" through
2": 1,500 psig WOG Cold, Non-shock
73A Series: 1/4" through 1": 2,000 psig WOG, 11/4" through 2": 1,500 psig WOG Cold, Non-shock
• Steel or 304 stainless steel handle with hole
for tagging.
• Blow-out resistant stem.
• Body: Bronze, stainless steel, carbon steel
(barstock, cast or forged), Alloy 20 and nickel.
• Ball: Chrome plated bronze or carbon steel,
stainless steel, Alloy 20 and nickel.
• RPTFE seats and seals, stuffing box ring and
seal washer.
Note: Seat material determines practical working
pressures. Pressures referenced are body ratings.
71 SERIES
7K SERIES
Bronze ball valve with
mounting pad; deadman
spring return handle
available. Sizes: 1/4"
to 3".
73A SERIES
Auto Draining; bronze fullport ball valve with 1/4" NPT
tap for drain. Available with
lock-closed-only lever.
Sizes: 1/4" to 2-1/2".
76 SERIES
Stainless steel standard
ball valve; investment cast
components; 2,000 WOG
to 1". 1,000 WOG 1-1/2" to
3"; Sizes: 1/4" to 3". 76-600
Series - Stainless steel
3-way diversion ball valve;
800 psig WOG; investment
cast components.
Forged carbon steel
construction, standard
port design 2,000 WOG to
1". 1,500 WOG 1-1/4" to
2". With actuator
mounting pads and raised
handle stops. NACE
compliant with SS trim.
Sizes 1/4" to 2".
“You can afford American made Apollo Backflow
Preventers.”
77W SERIES
Apollo-Press® ball valves are designed for
direct mechanical
connection to copper
tubing in sizes 1/2" - 2".
The 77W complies with
ANSI/NSF 61 Section 8
and is ideal for plumbing
and heating systems. The
press connection ensures
easy installation with
standard crimping tools.
www.apollovalves.c om
Standard Ball Valve Design Features
70 SERIES
Bronze ball valve with
threaded or solder ends;
chromium-plated ball;
available with latch lock
handle. Sizes: 1/4" through
4". 70-600 Series - Bronze
3-way diversion ball; large
ports; 600 WOG rating; 90°
operation. Sizes: 1/4" - 3".
11
CICA90002009:COAL 0383 CICA9000
Standard
Apollo® Ball
Valves
es
a lv
S ta n
dar
d
Ap
ol
lo
fi
V
ll
a
B
5/8/2009
11:26 AM
Page 12
All Products Brochure
89 SERIES
77C SERIES
Full-port “Contractor Series”
bronze ball valve with solid
chrome-plated ball for superior
flow characteristics. U.S.-made
cast bronze body and end-cap.
NPT and ANSI B16.18 solder
end connections available.
Sizes 1/4" to 2-1/2".
9A/90 SERIES
74 SERIES
Saturn® bronze one piece
ball valve; UL listed 300
psig (9A rated 600 psig
WOG); threaded ends; for
fuel, inert gas, flammable
liquids; “tee” or lever
handles. 90 Series sizes:
1/2" to 2". 9A Series sizes:
1/4" to 2".
76-300/400 SERIES
Stainless steel ball valve
with double union ends;
blow-out proof stem; all
wetted metallic parts are
316 stainless steel;
RPTFE seats and seals;
adjustable packing gland;
stainless steel lever and
nut. Sizes: 1/2" to 2".
Chemical resistant nickel
ball valve; blow-out
resistant stem; stainless
steel lever and nut;
precision investment
cast components.
Sizes: 1/2" to 2".
91 SERIES
77 SERIES
75 SERIES
92-100 SERIES
78 SERIES
32 SERIES
Reduced-port economy bronze
ball valve. Blow-out-proof stem
design. Adjustable packing gland.
400 psig CWP, cold non-shock.
125 psig saturated steam.
Vacuum service to 29" Hg. Sizes:
1/4" to 2". Available with solder
and threaded ends.
76F SERIES
Compact Saturn® bar
stock steel unibody ball
valve. Certified fire safe
with graphite packing;
RPTFE seats and seals,
blowout-proof stem
design. Sizes 1/4" to 2".
Choose from bronze ball
valve with solid brass
cap and chain, bronze
4" NPT ball valve,
bronze instrumentation
ball valve, or purge and
drain ball valve models;
many options available.
93 SERIES
80/81 SERIES
Economy stainless steel
full port valve, 1000# CWP
rating. Threaded ends,
blowout proof stem,
investment cast body, 316
SS components, including
stainless handle. RPTFE
seats and long-life MPTFE
packing. Sizes 1/4" to 2".
Saturn® bronze one
piece ball valve; rated
400 psig for WOG cold,
non-shock; threaded
and solder ends. Sizes:
1/4" to 2".
Bronze full-port ball
valve with mounting pad;
designed for easy
actuator mounting.
Sizes: 1/4" through 21/2". Available in NPT
and SAE threads.
Bronze padlockable ball
valve; rated 600 psig
WOG; stainless steel
lever and nut optional;
automatic drain available.
Sizes: 1/4" to 2".
12
Carbon steel ball valve
with threaded ends;
1,500 and 2,000 psig
WOG; easy actuator
mounting. Sizes 1/4"
to 3". (Actuator Ready
version: 89-ARX-64.)
Bronze ball valve for
LP gas, natural gas,
flammable liquids and
heated oil; adjustable
packing gland. UL listed;
Sizes: 1/4" to 3".
Customer Se rvice 1-704 -841-6 000
Saturn® carbon steel
unibody ball valve;
WOG rated 1,500 to
2,000 psig, cold, nonshock; optionally meets
API 607 fourth edition
fire safe standards.
Sizes: 1/4" to 2".
CICA90002009:COAL 0383 CICA9000
5/8/2009
11:26 AM
Page 13
All Products Brochure
95 SERIES
86A SERIES
Bronze stop and
drain ball valve; 400
psig WOG rating;
threaded or solder ends;
many handle options
available. Sizes: 1/2",
3/4" and 1".
96 SERIES
Saturn® stainless steel
unibody ball valve; WOG
rated 1,500 to 2,000 psig;
optionally meets API 607
fourth edition fire safe
design standards; “tee”,
round, cam lock or latch
lock handles available.
Sizes: 1/4" to 2".
Three Piece Ball Valve
82 SERIES
Bronze three piece fullport ball valve; rated
600 psig WOG;
threaded, solder and
brazed tube ends; in-line
maintenance. Sizes:
1/4" through 4".
83A SERIES
Carbon steel, full-port three piece
ball valve, 1500 psig CWP;
stainless ball and stem, ISO 5211
mounting pad, stainless enclosed
fasteners and topworks, multipiece V-ring packing, gland plate
style packing adjustment and
lockable. Available with threaded,
socket weld and butt weld ends.
Sizes: 3/8" to 2". Limited options.
83B SERIES
Carbon steel, full-port three
piece ball valve, class 600 (all
sizes): stainless ball & stem,
ASME B16.34, ISO 5211
mounting pad, enclosed B8M
fasteners, stainless topworks,
multi-piece
V-ring packing, gland plate style
packing adjustment, static
grounding, spiral gaskets and lockable. Available with
threaded, socket weld and butt weld ends. Sizes: 3/8"
to 2". Numerous options: including live-loading or
tested to API 607, 5th edition.
www.apollovalves.c om
Stainless steel, full-port
three piece ball valve,
1500 psig CWP; ISO 5211
mounting pad, enclosed
fasteners, multi-piece Vring packing, gland plate
style packing adjustment
and lockable. Available
with threaded, socket weld
and butt weld ends. Sizes: 3/8" to 2". Limited
options.
Three Piece &
AR Ball Valves
86B SERIES
Stainless steel, full-port three
piece ball valve, class 600;
ASME B16.34, (all sizes),
ISO 5211 mounting pad,
enclosed B8M fasteners,
multi-piece V-ring packing,
gland plate style packing
adjustment, static grounding,
spiral gaskets and lockable.
Available with threaded,
socket weld and butt weld ends. Sizes: 3/8" to 2".
Numerous options: including live-loading or tested
to API 607, 5th edition.
76-AR SERIES
Stainless steel standard
port ball valve;
investment cast
components; ISO
mounting pad;
advanced live-loaded
packing design; latch
lock handle available.
Sizes 1/4" to 3".
77-AR SERIES
Bronze full-port ball
valve with threaded
ends; ISO mounting
pad; advanced liveloaded packing design;
latch lock handle
available. Sizes 1/4"
to 2".
Apollo® AR™
Ball Valves
Apollo® AR™ actuator ready ball valves feature an ISO
5211-style mounting pad with no handle to throw away.
They are made for high cycle applications, and like all
Apollo valves, the bodies are cast to the highest
metallurgical standards for long service life.
77D SERIES
Full port bronze ball
valve with an integral
ISO 5211 mounting pad.
Double o-ring stem seal
and MPTFE seats and
bearings.Sizes 1/2” - 2”
with standard stainless
steel ball and stem.
They are available in stainless steel, carbon steel and
bronze. They feature a live loaded multi-stacked “V”ring stem packing. All models come standard with a
stainless steel ball and stem, and multifill seats, seals
and packing rated up to 2,000 psig or to 450˚F, or to
250 psig saturated steam. (Bronze rated to 600 psig.)
71-AR SERIES
89-AR SERIES
Bronze standard port
ball valve with
threaded ends; ISO
mounting pad;
advanced live-loaded
packing design; latch
lock handle available.
Sizes 3/4" to 3".
Carbon steel standard
port ball valve;
investment cast
components; ISO
mounting pad;
advanced live-loaded
packing design; latch
lock handle available.
Sizes 1/4" to 3".
13
CICA90002009:COAL 0383 CICA9000
5/8/2009
11:26 AM
Page 14
All Products Brochure
Heavy Duty Apollo®
Ball Valves &
Specialty Valves
88A SERIES
64W SERIES
Carbon steel Class 150
and 300 flanged valve;
regular or full-port; ISO
5211 actuator mounting
pad. Sizes: 1/2" to 12".
Specialty Valves
399/87A-400/401R SERIES
Heavy-Duty
Apollo® Ball
Valves
•
•
•
•
•
•
•
Blow-out proof stem
Field repairable
RPTFE seats and stuffing box rings
Meets WW-V-35C federal standards
Fire safe designs available
Expanded pressure ranges
High-performance alloys
Alloy 20 two piece,
three piece, and
Class 150 flanged
ball valves;
reinforced seats
and seals; options
available. Two
piece sizes: 1/4" to
2". Three piece sizes: 1/2" to
2". Flanged sizes: 1/2" to 4".
7K AND 77K SV SERIES
Full port bronze
secure-vent valves.
Ideal for automatic
venting of
compressed air for
powering tools and
equipment when
the valve is in the
closed position.
Live loaded seats
on upstream side.
Available in 1/4” - 2” size with
a variety of handles.
72 SERIES
Carbon steel high
pressure ball valve;
rated 3,000 psig.
Sizes 1/4" to 2".
Pressure is body rating.
87A SERIES
64 SERIES
Stainless steel Class
150 and 300 flanged
valve; regular or fullport; ISO 5211 actuator
mounting pad. Sizes:
1/2" to 12".
14
Apollo® International
Ball Valves
Apollo International
forged brass full port
ball valve. An
economical valve that
is available in 1/4” - 4”
NPT and 1/2” - 4” in
sweat connections.
Rated at 600 psig cold
working pressure.
Customer Se rvice 1-704 -841-6 000
Apollo International
Apollo-Press® ball
valve in 600 psig
brass body. Available
in 2-1/2” to 4” sizes.
Ideal for installation in
plumbing and heating
systems, including
potable water.
94A SERIES
Apollo
International
forged brass full
port ball valve in
thread and sweat
connections. An
economical valve
that is available in
1/4” to 4” in NPT and 1/2” to 4” in
sweat connections, Rated at 600 psig
cold working presure 1/4” - 2” and 400
psig 2-1/2” - 4”.
95A SERIES
Apollo
International
forged brass full
port stop and
waste ball valve.
Available in
threaded and
sweat
connections and rated at 600 psig.
This valve features a side drain ideal
for plumbing or hydronic heating
systems.
IBV-125 SERIES
Apollo
International
flanged cast iron
ball valves can be
used to replace
any IBBM
dimension gate
valve or plug
valve to give the convieneince of
quarter turn operation. Sizes 2” - 10”
rated at 125 WSP and 250 CWP. Also
available with FDA approved epoxy
coating.
CICA90002009:COAL 0383 CICA9000
5/8/2009
11:26 AM
Page 15
All Products Brochure
Top Entry
Apollo® Ball Valves
Features:
• Sizes 1/2" to 12"
• Temperatures - 150˚F to +1,000˚F
• ANSI Pressure Class 150, 300, 600
• High vacuum to 1,500 psig
• 16 seating materials, four
different configurations
• High-strength encapsulated metal
seat holders
• 11 body materials
• 11 ball and stem materials
• Six end configurations
• Standard bonnets, extended bonnets
and fugitive emissions bonnets all interchangeable
NPT AND SOCKET
WELD SERIES
Available in 300 ANSI
Class sizes 1/2" to 3";
and 600 ANSI Class 1/2"
to 2". Materials: Alloy 20, carbon
steel, Hastelloy C, M35-1,
nickel, stainless steel, titanium
and others upon request. Fullport available in 300 ANSI class
sizes 1/2" to 2" and 600 ANSI
class sizes 1/2" to 1-1/2".
Top Entry
Apollo® Ball
Valves
Steam Jacketed
Top Entry Valves
BUTT WELD SERIES
Available in ANSI
Class 300 to 8" and
Class 600 to 6" size.
Schedule 10, 40 and
some 80 pipe ends
offered. A full range
of body, seat and seal
materials are
available.
Fugitive Emissions
Bonnet Features
FLANGED SERIES
In 150, 300 and 600
ANSI Class.
Materials: Alloy 20,
carbon steel,
Hastelloy C, M35-1,
nickel, stainless steel,
titanium and others
upon request. Sizes
1/2" to 10".
FULL-PORT FLANGED SERIES
In 150, 300 and 600
ANSI Class. Materials:
Alloy 20, carbon steel,
Hastelloy C, M35-1,
nickel, stainless steel,
titanium and others
upon request. Sizes
1/2" to 6".
www.apollovalves.c om
• Incorporates a
monitoring port
between two packing
sets enabling
sensing of toxic
leakage before it
escapes to the
atmosphere.
• The lower packing
stack is pressure
activated as well as
live loaded by an
internal spring. Use
of bellville washers
will insure a positive
load to both the upper
and lower packing,
providing a longer
cycle life.
• The monitoring port
can be pressurized
with an inert media to
a value in excess of
internal valve
pressure insuring
zero leakage to the
atmosphere. Also, a
low pressure gauge
can be fitted here
or it can be used as
a sniff port.
Conbraco’s Apollo® Top Entry Ball Valves
are ideally suited for jacketed applications.
The top entry concept allows for continued
access to stem packings and valve internals
for ease of maintenance without disturbing
the jacket itself or removing the valve from
the pipeline.
15
CICA90002009:COAL 0383 CICA9000
5/8/2009
11:26 AM
Page 16
All Products Brochure
Apollo Actuators
& Butterfly Valves
®
Apollo® Electric Actuators
AE SERIES
Electric actuators;
torque output: 200 to
1,000 lb-in.; NEMA 4 &
4X (water tight &
corrosion-resistant)
enclosures; thru shaft
manual override.
Reversing motors in 24,
115, 220 VAC & 12 and
24 VDC. CSA Listed.
Apollo® Pneumatic
Actuators And Accessories
APOLLO® “ACUTORQUE”
STAINLESS STEEL ACTUATOR
Apollo® feature rack and pinion design. Available
in 12 sizes to complement torque requirements
of most Conbraco valves. Both spring return and
double acting versions are available. Spring
return torque ratings at 80 psig are from 72 to
10,735 lb-in.
Double acting torque ratings at 80 psig range
from 71 lb-in. to 25,469 lb-in. Apollo®
actuators feature ISO 5211 interface
dimensions and NAMUR solenoid and
accessory interface dimensions. Conbraco
also supplies pre-engineered stainless steel
valve/actuator mounting kits for all Apollo®
valves equipped for automation.
Accessories
• Mechanical and electronic position indicating
switches (various NEMA enclosure ratings).
• Pneumatic positioners
• Position transmitters (4-20 mA, 0-1000 OHMS).
• Solenoid valves (multiple voltages, AC or DC,
various electrical ratings).
• Air filter regulators.
16
CS/CL SERIES
Industrial quality reversing motor design
electric actuator; operating torques from
150 to 3,000 lb-in.;
AC and DC motors;
extended duty cycles;
NEMA 4 and 7
enclosures.
Apollo® International
Butterfly Valves
141/143 SERIES 2" TO 24"
The Apollo AcuTorque actuator is
manufactured with an integral internal air
manifold. Valve interface dimensions are
ISO 5211 standard. The solenoid mounting
pad and slotted shaft are manufactured
to NAMUR dimensional standards. For
applications not requiring a direct mount
solenoid valve, ports NPT threaded.
Investment cast steel body and unique
drive pinion make the AcuTorque an
excellent choice for tough applications.
Torque outputs from 21 to 20,929 lb-in.
LB SERIES
Electric actuators;
torque output: 300 to
54,000 lb-in.; on/off or
modulating control
available. 115 VAC50/60 Hz single phase.
220/440 VAC - 50/60 Hz
three phase.
Customer Se rvice 1-704 -841 -6000
General Purpose/Economy Design
For use in industrial and HVAC/
mechanical markets. The 141 Model is
a wafer style valve; the 143 Model is
a companion lug. Both are rated at
200 psig bubble-tight shut-off between
flanges. They feature an extended
neck length to provide a minimum 2"
clearance between valve top plate and
pipe flange. 141/143 Series meet MSS
SP-67 and API 609 specifications.
CICA90002009:COAL 0383 CICA9000
5/8/2009
11:26 AM
Page 17
All Products Brochure
Notes
www.a pollovalves.c om
17
CICA90002009:COAL 0383 CICA9000
5/8/2009
11:26 AM
Page 18
All Products Brochure
Notes
18
Customer Se rvice 1-704 -841 -6000
CICA90002009:COAL 0383 CICA9000
5/8/2009
11:26 AM
Page 19
All Products Brochure
Notes
www.a pollovalves.c om
19
CICA90002009:COAL 0383 CICA9000
5/8/2009
11:26 AM
Page 20
All Products Brochure
For more information contact your nearest Apollo / Conbraco / Distributor:
Conbraco Industries, Inc.
P.O. Box 247
Matthews, NC 28106
Phone: (704) 841-6000
Fax: (704) 841-6020
Conbraco Industries, Canada
Phone: (905) 761-6161
Fax: (905) 761-6666
www.apollovalves.com
Apollo® and Conbraco® are registered trademarks of Conbraco Industries, Inc.
Conbraco Industries reserves the right to change specifications without notice.
©2009 Conbraco Industries, Inc.
DKG 5M 3/09
CICA9000
Printed in USA
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement