ABH01F QSG v2 (English)

ABH01F QSG v2 (English)
Package Contents
Bluetooth Wireless Stereo Headphones
Quick Start Guide
Product Highlights
Button Operation
Answer Call / End Call / Power ON /
Power OFF / Pair Bluetooth Device / Play / Pause
Adjustable Headband
Your order has been carefully packaged and inspected. The following accessories should
be included in your package. Please inspect the contents of the package to ensure that
you have received all items and that nothing has been damaged. If you discover a problem,
please contact us immediately for assistance.
Microphone
aluratek.com
3.5 mm Cable
3.5 mm
LINE IN port
Registration Card
LED Indicator
Volume Control / Next / Previous Track
model ABH01F
qsg Q10405
button for 2 seconds. The blue LED will flash twice.
Power Off: Press the
button for 3 seconds. The red LED will flash twice.
Volume Adjust: Press the
Micro USB
Charging Port
USB Charging Cable
Power On: Press the
Copyright © 2016 Aluratek, Inc. All Rights Reserved.
Play/Pause: Short press the
or
buttons to adjust the volume.
button to play and pause music.
Previous: In standby status, long press the
previous music track.
Next: In standby status, long press the
music track.
Answer Call: Short press the
End call: Short press the
Reject call: Press the
button for 2 seconds to return to the
button for 2 seconds to advance to the next
button to answer phone calls.
button to end the phone call.
button for 2 seconds to reject a call.
Button Operation
Device Operation
Device Operation
Device Operation
Transfer call: During the phone call, press the
button for 2 seconds to switch the call
to your smartphone. Press the
button for 2 seconds again to switch the call back to the
headphones.
Charging the battery
The battery is not fully charged and it is highly recommended that you charge ABH01F
before you begin using it.
Note: The pairing mode will last 10 minutes. ABH01F will power off automatically if no devices can be
connected within 10 minutes.
3.5mm music line-in function
Connect the audio line-in 3.5mm cable to 3.5 audio jack for wired music.
Last number redial: In standby status, press the
number.
Note: Using ABH01F “out of the box” will not harm the device. You will experience reduced battery life as the
unit will not be fully charged.
button twice to redial the last
Call Mute function: Press the
button for 2 seconds to mute a call in progress. Press
the
button for 2 seconds again to unmute the call.
Battery Capacity status: When the headphones are connected to an iOS device, the
headphone battery power status is visible in the upper right corner.
Reset Mode: Connect the headphones to a computer via a micro USB cable. When the
red LED flashes, the reset is complete.
Connect the larger USB end of the provided cable to your computer / power adapter
(not included). Connect the smaller micro USB end to the USB port of ABH01F. Please
charge the battery for a minimum of 3 hours. The red LED will be on while charging.
When charging is complete, the blue LED will turn ON.
Function
Operation
Enter Pairing
Mode
Ensure ABH01F is turned OFF. Press and hold the
6 seconds. Red and blue LED will flash rapidly.
button for
Pairing with an iPhone, smartphone or tablet:
The pairing procedure will vary depending on the actual device. Please refer to the user
guide of your device for detail instruction. The pairing procedures are as follows:
1. Make sure the headphones are powered OFF.
2. To activate the headphone pairing mode, press and hold the
button for 6 seconds.
(Red and Blue LED will flash rapidly)
3. Activate your device’s Bluetooth function and set your device to search for Bluetooth
devices. Select ABT01FKIT when it is found.
4. For transmitter with Bluetooth version 2.1, you will not need to input a code. If you
are prompted for PIN, please enter “0000”.
5. If prompted by your device to connect, please select “Yes”.
6. After connecting successfully, the blue LED will flash 3 times every 5 seconds.
1. Connect the 3.5 audio wire to the headphone and audio player.
2. You can adjust the volume from the connected audio player or mobile phone.
Note: Phone function cannot be used in this mode
Note: Please make sure the audio output is set to Bluetooth for audio streaming from the device.
Power ON /
OFF
Press and hold the
button for 2 seconds.
A blue LED will flash twice for ON. A red LED will flash twice for OFF.
Technical Support
Radio and TV Interference Statement
Warranty
If you need further assistance, please contact the Aluratek support department for
troubleshooting prior to returning this device.
WARNING!!! This equipment has been tested and found to comply with the limits of a
Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
Aluratek warrants this product against defect in material or workmanship for 1 YEAR
from the date of purchase.
E-mail: [email protected]
Web: www.aluratek.com/helpdesk
Local (Irvine, CA): 714-586-8730
Toll free: 1-866-580-1978
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by whatever measures may be
required to correct the interference.
This warranty becomes invalid if the factory-supplied serial number or "warranty void" sticker has
been removed or altered on the product.
This warranty does not cover:
A) Cosmetic damage or damage due to acts of God
B) Accident, misuse, abuse, negligence or modification of any part of the product.
C) Damage due to improper operation or maintenance, connection to improper equipment,
or attempted repair by anyone other than Aluratek.
D) Products sold AS IS or WITH FAULTS.
IN NO EVENT SHALL ALURATEK'S LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT
FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF THE PRODUCT, IT'S ACCOMPANYING SOFTWARE, OR
IT'S DOCUMENTATION.
Aluratek makes no warranty or representation, expressed, implied, or statutory, with respect to it's
products, contents or use of this documentation and all accompanying software, and specifically
disclaims it's quality, performance, merchantability, or fitness for any particular purpose. Aluratek
reserves the right to revise or update it's product, software or documentation without obligation to
notify any individual or entity.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement