QUICK

SETUP GUIDE

24" LED TV

DX-24E310NA15

Thank you

for purchasing this state-of-the-art

Dynex television. We hope you enjoy the quality and reliability of this television for years to come.

START HERE

How do I attach the stand to my TV?

(not for wall mounting)

You’ll need: Phillips screwdriver and a soft surface to lay the TV on.

A Carefully place your TV face-down on a cushioned, clean surface.

B Find the front of the TV stand. Hook the tab on the stand column through the slot on the stand, then push the stand into place.

C Secure the TV stand to the stand column with the provided M4 (12 mm) screw.

- OR -

How do I prepare my TV for wall mounting

(not for use with a TV stand)

A Lay the TV down on a soft surface, then remove the three screws and the stand column.

B Attach the wall-mount bracket to your TV using either the four provided M4 × 8 mm or the

M4 x 28 mm screws that came with the TV.

WARNING: Do NOT use the screws that came with the wall mount because they may be too long.

If your wall mount uses spacers, use the M4 x 28 mm screws. If your wall mount does not use spacers,

use the M4 x 8 mm screws.

C See the instructions that came with the wall-mount bracket for information about how to correctly hang your TV.

A

A B

Front

B

C

M4 (12 mm) screws

C

Wall mount installation guide

(not included)

STOP!

Do not plug your power cord in until all other devices have been connected.

Which cables do you have?

Your TV has several different jacks for connecting devices. For the best video quality, use the best available connection.

Included accessories

1

4

7

2

5

8

PICTURE

0

AUDIO MTS/SAP SLEEP

3

6

9

INPUT

VOL CH

INFO*

CCD

ASPECT

FAV

HOM

E

ENTER

MENU EXIT

Remote control and two AAA batteries

DX-RC5NA-15

VIDEO QUALITY JACK TYPE CABLE CONNECTOR

BEST

GOOD

GOOD

HDMI video/audio

Composite video and analog audio (AV)

Coaxial video/audio

Note: You can also connect a DVI device to your TV. See your online User Guide for connection instructions. This TV only supports DVI video.

Features

Front view

Power Cord

FIND YOUR

USER GUIDE ONLINE!

We are going green so a copy of your

User Guide is not provided in the box but is available online.

Go to www.dynexproducts.com, click Support & Service, enter your model number in the box under Manual,

Firmware, Drivers & Product Information, then click Search.

TV stand

M4 screws

(12 mm length) (3 pcs.)

Wall mounting hardware

M4 screws (8 mm length) (4 pcs.)

Back view

Remote control sensor

Power indicator

MAKING CONNECTIONS

How do I watch TV (cable or satellite box) and/or connect a device such as a

DVD or Blu-ray disc player, game station, or camcorder?

Using an HDMI cable (BEST)

Using an AV cable (GOOD)

HDMI1 (D

AV cable option

AUDIO/VIDEO

OUT

DC IN

(12V)

USB

VIDEO

HDMI2

DC IN

(12V)

HDMI1

HDMI2 HDMI1

VIDEO

L IN R

L IN R

DIGITAL

OUTPUT

(COAXIAL)

OUTPUT

(COAXIAL)

SERVICE

PORT

ANT/

CABLE IN

AUDIO OUT

How do I connect my TV to an antenna or cable wall jack?

Multi-purpose jacks: You can plug any device that uses HDMI into either HDMI jack. However, certain devices must be connected to the DVI jack. See the instructions that came with your DVI device for more information.

Note: This TV only supports DVI video.

M4 screws (28 mm length) (4 pcs.)

Use these screws for wall-mounting.

Do NOT use the screws that came with the wall mount because they may be too long.

DC IN

(12V)

USB HDMI2 HDMI1/DVI

VIDEO L IN R

AV IN

DIGITAL

OUTPUT

(COAXIAL)

SERVICE

PORT

ANT/

CABLE IN

AUDIO OUT

Note: Images do not necessarily represent the exact design of your television.

Before using your new product, please read these instructions to prevent any damage.

DC IN

(12V)

USB HDMI2 HDMI1/DVI

VIDEO L IN R

AV IN

DIGITAL

OUTPUT

(COAXIAL)

ANT/

CABLE IN

AUDIO OUT

CABLE

OVER

CONNECTING AUDIO DEVICES

How do I connect my TV to external speakers?

Using digital audio

DIGITAL

AUDIO IN

24" LED T V I QUICK SETUP GUIDE I DX-24E310NA15

SOUNDBAR

Using your remote control

INPUT SOURCE

TV

AV

HDMI1

HDMI2

USB(Photos)

Power

Turns your TV on or off.

Sound Mode

Treble

Bass

Balance

Digital Audio/SPDIF

Audio Language

MTS/SAP

Reset Audio Settings

Picture Audio Settings Channels USB

Standard

50

50

50

PCM

English

Mono

Move Select

MENU

Adjust settings to affect sound quality

Back

EXIT

Exit

On your TV, set the Digital Audio/SPDIF option on the Audio menu to PCM.

DC IN

(12V)

USB

- OR -

Using analog audio

HDMI2 HDMI1/DVI

VIDEO L IN R

AV IN

DIGITAL

OUTPUT

(COAXIAL)

SERVICE

PORT

ANT/

CABLE IN

AUDIO OUT

Note: Refer to the instructions that came with your speakers for more information.

AUDIO IN

SOUNDBAR

What are my screen-size options?

NORMAL: Original aspect ratio is preserved.

Black bars are present if content is not wide-screen (16:9).

ZOOM: Expands the image to fill the screen.

The top and bottom of the image may be cropped.

WIDE: Displays content recorded in a

16:9 (wide-screen) aspect ratio.

CINEMA: Stretches the image at the edges, but keeps a clear image in the center.

AUTO: Automatically adjusts the image based on the screen size and the TV program. Select this option if you are uncertain which aspect ratio to choose.

Note: Auto is only available when Auto

Zoom in the Channels menu is set to On.

Enters a digital sub-channel number (for example 4.1).

.

PICTURE

Selects the video mode.

AUDIO

Selects the audio mode.

INPUT

Opens the INPUT SOURCE list.

Volume

Changes the volume.

CCD

Turns closed captioning on or off.

ASPECT

Changes how the picture is displayed on the screen.

MENU

Opens the on-screen menu.

ENTER

Confirms selections or changes.

DC IN

(12V)

USB HDMI2 HDMI1/DVI

VIDEO L IN R

AV IN

DIGITAL

OUTPUT

(COAXIAL)

SERVICE

PORT

AUDIO OUT

ANT/

AUDIO OUT

CABLE IN

Note: Refer to the instructions that came with your speakers for more information.

4

TURNING ON MY TV

When can I turn on my TV?

The best time to turn on your TV is after you have connected all devices.

Picture Mode

Contrast

Brightness

Color

Tint

Sharpness

Backlight

Advanced Video

Reset Picture Settings

Picture Settings Channels USB

Energy Savings

60

48

55

0

55

22

Move Select

MENU

Back

Adjust settings to affect picture quality

EXIT

Exit

1

4

7

2

5

8

PICTURE

0

AUDIO MTS/SAP SLEEP

3

6

9

INPUT

VOL CH

INFO*

CCD

ASPECT

FAV

HOME

ENTER

MENU EXIT

DX-RC5NA-15

MUTE

Mutes the sound.

Numbers

Enter channel numbers.

RECALL

Returns to the previous channel.

SLEEP

Sets the sleep timer.

MTS/SAP

Analog TV: Cycles through mono, stereo, and secondary audio.

Digital TV: Selects the audio language from the current channel.

INFO*

Opens a TV status banner.

Channel

Changes the TV channels.

HOME

Opens the on-screen menu.

FAV

Opens the Favorite Channel List.

EXIT

Closes the on-screen menu.

Arrows

Navigate in on-screen menus.

When your television is in place:

1 Plug one end of the power cord into the DC IN connector on the back of your TV and the other end into a power outlet.

2 Remove the remote control cover and install the batteries, matching the + and - symbols.

3 Press (power) on your remote control.

4 Follow the on-screen instructions.

Setup Wizard

Choose Your Menu Language

English

Français

Español

Move Select

MENU

Set menu language to English,

Français, or Español

Back

Enter

EXIT

Exit

I already have a universal remote control. How do I make it control this TV?

If you already have a universal remote control that you would like to program to work with your TV and don’t want to use the included Dynex remote control, see the table for common codes.

UNIVERSAL REMOTE TV CODES

CABLE BOX, SATELLITE BOX, OR OTHER SET-TOP BOX

Cablevision

Charter

Comcast

Cox

Direct TV

2002, 1204, 1423, 1517, 0171, 1963, 0463, 1463, 0842, 1326, 167, 415, 424, 450, 456, 461,

507, 523, 567, 577, 586

10171, 11204, 11326, 11463, 11517, 11641, 11780, 11785, 11892, 11963, 12002

1326, 1463

10171, 11204, 11326, 11517, 11564, 11641, 11963, 12002

Dish Network 720

Time Warner

Tivo

Verizon

068, 069, 078, 096, 100, 164, 168, 229, 026

400, 450, 461, 456, 10463, 1463, 0463

0091

0198, 0490

UNIVERSAL REMOTE CONTROLS

One for All

Philips

RCA

Sony

0054

0198, 0490

135

068, 069, 078, 096

For an up-to-date list of codes for other cable providers and universal remote brands, scan this QR code or visit www.dynexproducts.com/remotecodes.

One-year limited warranty

Visit www.dynexproducts.com for details.

Need additional help?

See your online User Guide! This comprehensive guide includes everything from basic how-to steps to more advanced features. A copy of your User Guide is not provided in the box but is available online.

Go to www.dynexproducts.com, click

Support & Service, enter your model number in the box under Manual,

Firmware, Drivers & Product Information, then click Search.

We’re here for you www.dynexproducts.com

For customer service, call:

800-305-2204

(U.S./Canada markets)

DYNEX is a registered trademark of BBY Solutions, Inc.

Registered in some countries.

Distributed by Best Buy Purchasing, LLC,

7601 Penn Ave South, Richfield, MN 55423 U.S.A.

©2014 BBY Solutions, Inc.

All Rights Reserved

1-800-305-2204 www.dynexproducts.com

Made in China.

V3 ENGLISH 14-0766