- Industrial & lab equipment
- Electrical equipment & supplies
- Batteries & accessories
- Battery chargers
- KUSSMAUL
- 091-26-12
- Owner's manual
Kussmaul 091-26-12 Battery Charger Owner Manual
Add to my manuals5 Pages
KUSSMAUL 091-26-12 is a compact, fully automatic battery charger designed for installation on vehicles with two batteries. Here is a summary of its capabilities:
-
Simultaneous charging of two batteries: The charger features an internal charge divider that allows for the simultaneous charging of two batteries while maintaining complete battery isolation.
-
Automatic operation: The charger operates completely automatically, meaning that it will stop charging the batteries when they are fully charged.
-
Protection against overcharging: The charger employs advanced technology to prevent overcharging and water boil-off, ensuring the safety and longevity of your batteries.
advertisement
BOOK# 091-26-12, 4-23-97
INSTRUCTION MANUAL
AUTO CHARGE 3
AUTOMATIC BATTERY CONDITIONER
MODEL #091-26-12
NOTE:
THIS IS A CONDITIONER FOR MAINTAINING THE CHARGE IN A VEHICLE'S
BATTERY. IT WILL RECHARGE THE BATTERY SLOWLY BUT IS NOT RECOM-
MENDED FOR APPLICATIONS WITH AUXILIARY LOADS.
INPUT: 120 VOLT, 50/60 Hz, 1 AMP MAX
MAX. OUTPUT: 12 VOLTS, 3 AMPS
3 YEAR WARRANTY
KUSSMAUL ELECTRONICS CO., INC
.
170 CHERRY AVE., WEST SAYVILLE, N.Y. 11796
TEL: in NY 631-567-0314 TOLL FREE: 800-346-0857 FAX: 631-567-5826
INTRODUCTION
The Auto Charge 3 Automatic Battery Charger is a compact, completely automaticcharger designed for installation on vehicles with two batteries. An internal charge divider charges both batteries simultaneously while maintaining complete battery isolation. A maximum output of 3 amperes privides sufficient current for vehicles which do not have large constant accessory loads. Indicator lights are provided to signal when the charger is charging and when the charging is complete.
Construction of the Auto Charge 3 is extremely rugged to withstand the shock and vibration normally encountered by vehicle mounted equipment. The unit operates completely automatically and stops charging the batteries when they are fully charged. There is no trickle charge and therefore no danger of overcharging and water boiloff. Parasitic loads on the battery such as a radio, lights, etc., up to a maximum of 2 amps are automatically supplied with current from the charger.
INSTALLATION WIRING DIAGRAM
Auto Charge
Ready
Charge
Green
Red
D.C. Output
Fuse to
Batteries
®
Auto Charge 3
DUAL BATTERY CONDITIONER
REMOTE
OUTPUT
FUSE 8A
Ready
Charge
BATTERIES
POS
COM 1 2
INPUT
FUSE 1A
120 VAC
Input Power
Line Fuse
Chassis
Ground
Chassis
Ground
WIRE SIZE CHART
CONNECTION ITEM DEFINITION
COM BATTERY
COMMON
NEGATIVE CHARGING LEAD
FOR BATTERIES
1
2
BATTERY
NO.1
BATTERY
NO.2
POSITIVE CHARGING LEAD
FOR BATTERY # 1
POSITIVE CHARGING LEAD
FOR BATTERY # 2
WIRE SIZE
14 AWG
14 AWG
14 AWG
IMPORTANT: Wire size is for a maximum length of 40 feet. If wiring is to be longer, larger wiring is required. Additional information is available on request.
SPECIFICATIONS
SPECIFICATIONS:
Input: 120 Volts, 60Hz, 1 amp
Output Volts: 13.25 volts nominal
Output Current: 0-3 Amps D.C. output current determined by state of charge of batteries
Charge Indicator: RED LED indicates charging current
GREEN LED indicates fully charged
Remote Charge Indicator Connector: permits locating Red/Green LED's at remote loaction
Weight: 6 lbs
OUTLINE DRAWING
INSTALLATION RECORD & WARRANTY
Date Installed
Installed By
Vehicle Identification
Vehicle Owner
WARRANTY
All product of Kussmaul Electronics Company Inc. are warranted to be free of defects of material or workmanship. Liability is limited to repairing or replacing at our factory, without charge, any material or defects which become apparent in normal use within 3 years from the date the equipment was shipped.
Kussmaul Electronics Company, Inc. shall have no liability for damages of any kind to associated equipment arising from the installation and /or use of the Kussmaul Electronics Company, Inc. products. The purchaser, by the acceptance of the equipment, assumes all liability for any damages which may result from its installation, use or misuse, by the purchaser, his or its employees or others.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project