Index: WMGBMIC5000

INSULATION RESISTANCE METER

MIC-5000

MIC-5000 tester is designed to measure insulation resistance of power cables, transformers, motors and other electrically powered devices. Additionally the device allows for measurement of AC and DC voltages. Input circuits of the measuring devices are electronically protected from overloading, e.g. due to incorrect connection to the circuit being tested or incorrect use of input terminals.

Sonel S.A. ul. Wokulskiego 11

58-100 Świdnica, PL tel. +48 74 85 83 860 fax +48 74 85 83 809

[email protected]

www.sonel.pl

Standard accessories of the meter MIC-5000:

- Ni-MH battery package 7,2V 3Ah

- test lead with banana plug; 1,8m; 5kV; red

- shielded test lead with banana plug; 1,8m; 5kV; black

- test lead with banana plug; 1,8m; 5kV; blue

- „crocodile” clip K04; 5kV; black

- „crocodile” clip K05; 5kV; red

- „crocodile” clip K05; 5kV; blue

- pin probe with banana connector - black

WAAKU05

WAPRZ1X8REBB

WAPRZ1X8BLBB

WAPRZ1X8BUBB

WAKROBL20K04

WAKRORE20K05

WAKROBU20K05

WASONBLOGB2

- pin probe with banana connector - red

- carrying case L1

- hanging stramps

- cable for battery charger

- RS-232 serial transmission cable

- operating manual

- calibration certificate issued

by calibration laboratory

Optional accessories of the meter MIC-5000:

- software for creation of documentation from

electrical measurements „SONEL PE4”

- software for creation drawings and diagrams

„SONEL Schematic” + „SONEL PE4”

WAPROPE4EN

WAPROPE4SEN

- AGT-16P (triple phase socket adapter)

- AGT-32P (triple phase socket adapter)

- AGT-63P (triple phase socket adapter)

- USB1.1/RS232 adaptor

- USB key for software

WASONREOGB2

WAFUTL1

WAPOZSZE1

WAPRZLAD230

WAPRZRS232

WAADAAGT16P

WAADAAGT32P

WAADAAGT63P

WAADAUSBRS232

WAADAKEY1

MIC-5000

The most important features of MIC-5000 are:

· Insulation resistance measurement :

- test voltage selection between 250...5000V in 50V intervals, or predefined

250, 500, 1000, 2500, 5000V,

on-line insulation resistance measurement or leakage current,

automatic discharge of tested object’s capacitance after measurement of insulation resistance,

- direct measurement of one or two absorption coefficients,

acoustic determination of 5 seconds time intervals that facilitates to take time characteristics during insulation resistance measurement,

- saving measured value of test voltages and selected times T1, T2 and T3 ranging from 1... 600 seconds for the measurements of one or two absorption coefficients (DAR, PI or Ab1, Ab2).

indicator of the actual test voltage value during a measurement,

protection against live objects.

· AC/DC voltage measurement in range 0...600V.

· Memory of 999 measurement results with an ability to transfer the data to a PC.

· Automatic selection of measurement ranges.

· Powered by rechargeable battery pack:

included with the device an external power supply for automatic battery charging to ensure prolonged battery life and optimal working conditions,

- battery status indicator.

· AUTO-OFF function.

· Meter meets the requirements of the standard EN 61557.

Insulation resistance measurement

· test voltage can be set in the range between 250V and 5000V with 50V intervals

the range between 1sec and 600sec with accuracy ± 1sec measurement range according to EN 61557-2: R

ISOmin

...5,0TΩ; R

ISOmin

=U

ISOnom

/1mA

Range Resolution Accuracy

0,0...999,9k Ω

1,000...9,999M Ω

10,00...99,99M Ω

100,0...999,9M Ω

1,000...9,999G Ω

10,00...99,99G Ω

0,1k

0,1M

0,01G

Ω

0,001M

0,01M

Ω

Ω

Ω

0,001G Ω

Ω

±(3% m.v. + 20 digits)

100,0...999,9G

1,000...5,000T

Ω

Ω

0,1G Ω

0,001T Ω

· for measurements of limited , .

Minimum insulation resistance measured without limited converter current

Test voltage Range

250V

500V

1000V

2500V

5000V

250k Ω

500k Ω

1,0M Ω

2,5M Ω

5,0M Ω

DC voltage measurement

Range

0...600V

Resolution

1V

Accuracy

±(3% m.v. + 2 digits)

Electric security :

- type of insulation double, according to EN 61010-1 and IEC 61557

- measurement category

- measurement category for terminals and circuit 5kV:

CAT III 600V acc. to EN 61010-1 interpolated III 5000V

- protection class acc. to EN 60529 IP54

Rated operational conditions:

- operating temperature

≥

-10...+50°C

-0...+10% of the set value

- voltage fluctuation due to temperature changes better than

- converter output current

0,2%/°C min. 1,0mA for rated test voltage

1,0...3,0mA for 2500V

- measurement rate

- quality standard

1,0...1,4mA for 5000V approx. 1 measure/second

ISO 9001

AC voltage measurement

50Hz (sinusoidal shape with harmonic contents < 2%)

Range Resolution

0...600V

1V

„m.v.” - measured value.

Leakage current reading

Range

0...I

pmax

Resolution depending on range

Accuracy

±(3% m.v. + 2 digits)

Accuracy

+

I pmax

- maximum converter current 1,2 ± 0,2 mA,

Other technical data :

- power supply

- power supply adaptor

- minimum measurement time 5kV/1mA according to

EN 61557 (5s/25s)

- time to auto-off:

- mode R /I

L

- other modes

Ni-MH battery pack

100...240V

5h or 600 measurements

300 seconds

R - displayed insulation resistance value

DR - resistance measurement defined for a particular measurement v.5