VERTICAL WALL TOWERS POWERBLAST
OESCO is one of the top REARS dealers in the world!
REARS
Made in USA
Visit our website
for REARS sprayer
spec sheets
VERTICAL WALL TOWERS
Louvered air vanes adjust discharge angle.
Individual target zone spray controls. Manual
or electric air discharge and spray controls.
Available with standard or split manifolds for
quick spray height variation control. Optional
adjustable air doors control discharge volume
to compensate for wind conditions.
www.oescoinc.com
500 gallon with
13' folding tower
500 gallon with
10' radius top tower
POWERBLAST ENGINE DRIVE
REARS ORCHARD SPRAYERS
with John Deere Powertech 4.5L diesel engine; 115 HP turbo charged.
Features:
• 400, 500 or 600 gallon stainless steel tanks
• 33" or 38" stainless steel fan
• Electric fan clutch
• Electric throttle
• Electric spray controls
• REARS centrifugal pump
• Stainless steel
fan housing
• Rollover no-drip
nozzles with
ceramic tips
500 gallon
with 38" fan
POWERBLAST SPRAYER
with OVER ROW TOWERS
Adjustable reach to accommodate your row spacing.
Air dams to tune target turbulence. Drop tubes and
duct arms break away independently for protection.
Folds for easy transport. Stainless steel construction.
Reduce overspray by directing air to tree center from
three directions at once. Improved coverage which
means better pest control.
Pictured on 500 gallon Narrow Powerblast with tandem axles
66
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
REARS
Powerblast Spray System
Made in USA
Flexibility for your application
Durability for performance you can count on
Stainless Steel Construction: tank, fittings & hardware,
mechanical agitation, hard plumbing, spray manifolds,
fan housing
Rears Constant Velocity Hitch - for smooth 90° turns
under full loads, nothing beats a Powerblast
Rears Centrifugal Pump - 200PSI/80GPM
Rears Spray Control - manual, electric or hydraulic
Double-Rollover Nozzle Bodies - switch your
application rate with a simple twist
33"- 38" Diameter Axial Flow Fan - fitted to the
stainless steel fan housing for optimal performance
Our Best Selling
Orchard Sprayers
Time tested design, wide range of applications a flexible, durable system
500 gallon narrow with 33" fan
REARS
Unmatched
Constant
Velocity Hitch
REARS POWERBLAST SPRAYERS
Several model profiles as well as
tank and fan sizes to choose from
NEW
500 gallon standard with 33" fan
1000 gallon with 38" fan
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
67
REARS
PUL-BLAST
Made in USA
100-500 gallon stainless steel tanks, multiple profile,
medium power, adaptive PTO machine. CV or standard
hitch, diaphragm or centrifugal pump, adjustable pitch
fans with a two-speed gear box make these sprayers
adaptable to many tractor sizes and power requirements.
All tanks are provided with mechanical agitation and
electric spray controls.
300 gallon Pul-Blast
REARS PUL-BLAST SPRAYERS
300 gallon Pul-Blast Blueberry
Special with fenders
200 gallon Pul-Blast with wheel well
cut out in tank for narrower profile
100 gallon Pul-Blast with fenders
200 gallon narrow Pul-Blast
68
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
REARS
PAK-BLAST
The Pak-Blast adapts Rears' cutting edge
air-blast sprayer design to 3 point mounted
applications. By nesting the heavy duty gearbox and pump within the tank profile,
Rears has shifted the center of gravity forward toward the tractor lift arms. The
result is a high-performance sprayer that can be matched to the most compact
orchard tractor.
The Pak-Blast has a selection of aluminum alloy axial flow fans - 24" to
28" diameter. The fan is fitted to the fan housing to produce optimal performance. All fans have variable pitch.
50 gallon Pak-Blast
Available in 50, 75, 100 and 150 gallon tank size.
Made in USA
100 gallon Pak-Blast
100 gallon Pak-Blast with 1-sided
vegetable head
REARS PAK-BLAST SPRAYERS
100 gallon Pak-Blast with manual controls
100 gallon Pak-Blast with grape scoops
50 gallon Pak Blast, 24" fan
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
69
REARS
s p r ay b o o m s
Rears stainless steel tanks with mechanical agitation are mounted on steel frames using pto driven diaphragm
pumps. Stainless wet boom pipes provide the base for steel framed booms. Available with hydraulic or manual
boom fold and lift options. Tank sizes from 50 - 1000 gallons in 3 pt. hitch and trailer.
Made in USA
REARS BOOM SPRAYERS/FOAM MARKERS
Coil shock boom on Pul Tank
DP Boom mounted in utility vehicle with
304 Rears sprayer.
RMCO hydraulic fold boom
on heavy duty Pak-Tank
Foam Markers
200 gallon Pak-Tank with RMCO 25'
hydraulic fold boom
NEW
R E A R S PAk-MARk
12V compressor foam marker available in several
models. Normally used in turf, cranberries and
row crops. Adaptable for any sprayer or spreader,
requires 12V power supply.
For spreaders or sprayers up to 36" wide.
32 oz. tank, power unit, tubing and mounting
components uses D cell battery.
REA PM1-S - one sided
REA PM2-S-RC - 2 sided w/ remote control box
RIC TT-1101
For spreaders or sprayers up to 8' wide.
60 oz. tank, single air pump, remote switch,
tubing 12V vehicle battery powered.
RIC TT-3301
An affordable compact foam marker for pasture sprayers
& ATVs. Available as dual and single drop models. Baseball sized foam drops, outfits booms up to 30', use with
field speeds up to 7 MPH. 2 & 4 gallon tanks.
RIC MTD-2020 - 2 gallon
For spreaders or sprayers up to 18" wide. Dual
60 oz. tanks, dual air pumps, remote switch for
each side, tubing 12V vehicle battery powered.
RIC TT-4401
Richway Fomalot Turf Special Foam Concentrate
RIC TFM01 - 1 gallon
RIC MTD-2040 - 4 gallon
70
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
REARS
P a k - Ta n k
... the most popular 3 pt. hitch we sell!
25 to 200 gallon size • Standard or heavy duty frames • 3 pt. hitch or front mount
Pak-Tank sprayers come standard with
stainless steel tanks, mechanical agitation,
pto shaft driven diaphragm pumps and
sway chains. Many models of booms, guns
and hose available. Excellent for small fruit,
Christmas trees and general row crop
spraying.
Made in USA
50 gallon narrow Pak-Tank
100 gallon Pak-Tank
Front mount hydraulic drive Pak-Tank
50 gallon Pak-Tank
with 2 section boom
100 gallon Pak-Tank with orchard weed boom
Orchard Weed Boom
REARS PAK-TANK SPRAYERS
200 gallon Pak-Tank
Heavy duty frame
100 gallon Pak-Tank with 3 section boom
The telescoping length of this boom adjusts to the needs of the operator.
Mounts right or left side of tractor on transmission belly side.
Three stock models available. Kit includes hose, spring hinge and manual valve.
Many options including 12v electric valve. 1, 2, 3 nozzle models
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
71
skids
REARS
Commercial Skid Sprayers - Available with 50-1000 gallon stainless steel, single or
multiple tanks with mechanical agitation. Pumps and engine options available up
to 60GPM and 700PSI to meet your needs. Reels, hoses and guns are available to
fit each application.
Made in USA
REARS SKID TANK SPRAYERS
Rears multiple tank skid sprayer
500/200/200 gallon
John Deere diesel engine
High pressure diaphragm pump
Rears 300 gallon skid
Honda engine
High pressure diaphragm pump
Rears multiple tank skid sprayer
Multiple engine and John Bean piston pumps
Rears 100 gallon 304SS low profile skid
Honda engine
Diaphragm pump
72
Rears 300 gallon skid
Honda engine
Medium pressure diaphragm pump
Rears 600 gallon high pressure skid sprayer
Custom paint colors available
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
REARS
nifty series
For growers, gardeners and groundskeeping professionals.
Available as skid or trailer models with 25, 50
or 100 gallon tank size. All tanks are stainless
steel with mechanical agitation. Trailers are
offered with boat trailer tires or turf style. All
models have Honda engines and diaphragm
pumps for long life and low maintenance.
Made in USA
100 gallon Nifty skid, AR30 pump, Honda 5.5 HP engine.
25 gallon Nifty with boat trailer tires
NIfTY NuRSERY CART SPRAYER
REARS NIFTY SPRAYERS
50 gallon Nifty skid, AR30 pump, Honda 5.5 HP engine
Mechanical
Agitation
for organic
spraying
• 25 gallon wheelbarrow style Nifty Sprayer.
• Specifications: 25 gallon stainless steel tank, mechanical
agitation, stainless lid, basket strainer, volume sight
gauge, suction strainer with valve, pressure gauge,
pneumatic bicycle tires and steel handles.
• Pump: AR 252, 2 diaphragm 6 gpm, 290 psi
• Motor: 3 HP Briggs & Stratton, 3 HP Honda or 1 HP, 110V
AC electric motor.
• Accessories: 25' of 3/8" PVC hose, BR 380 brass spray gun.
• Options: Trailer hitch
50 gallon Nifty trailer with flotation tires and Rears Nifty Boom
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
73
J-400
Jacto J-400
Jacto J-600
3 pt. hitch, 105 gallon polyethylene tank with
mechanical agitation, 37 gpm, centrifugal
pump three outlet cannon head with
hydraulic lift and rotation available. 40 pto
HP required 60' plus swath. Pictured above.
3 pt. hitch, 158 gallon polyethylene tank with mechanical
agitation, 35 gpm, pto driven centrifugal dual stage pump
with hydraulic head rotation and deflector setting.
50 pto HP required 90' swath.
J-600
JAC 339259
JAC 142190
The J-600 CHT is a new version of the J-600
export, designed for farmers who have been
using the hydraulic system of the tractor to
move the cannon head both vertically and
horizontally while spraying.
Engine Drive Sprayers
A200 Airblast Sprayer
AIR BLAST CROP/ORCHARD SPRAYERS
These small trailer sprayers offer the power of a tractor driven
sprayer with the versatility of a narrow self contained unit.
This 36" wide sprayer features a
Vanguard engine, 20" fan that
can be disengaged, Hypro D30
diaphragm pump, Teejet nozzles
with diaphragm checks, turf tires
and clevis hitch. Available in 50
and 100 gallon tank sizes.
Great for use with an ATV or small
garden tractor in Christmas trees,
vineyards, berry plantations and
dwarf orchards.
Jacto A200 airblast
sprayers deliver big
performance in a small
package. Filled with
features that ensure long
life, excellent durability
and maximum crop
protection for hobby
farmers and small
growers, Jacto designed
the A200 to economically
meet the demands of
orchard, vineyard,
Christmas tree, berry, and other fruit and nut applications.
Specifically designed for compact tractors working in tight areas.
AGTEC 3004
Large capacity 3 Pt. hitch 540 rpm PTO driven air row crop sprayer,
100 gallon fiberglass tank, 120 gpm centrifugal pump, accurate meter,
12v electric valves, model 3000 squirrel cage fan, model 3000
rotating row crop head 12 volt operation.
Standard equipment: combination fan housing for orchard/row crop heads.
Options available: row crop head, orchard head, nut tree heads,
VMC tower heads, 150 gallon tank, hydraulic rotation, sight gauge in tank,
stack extension.
3004 with Row Crop Head
Made in USA
AgTec, Jacto and MS manufacture rotating head row crop air sprayers available in 3 pt. hitch and trailer versions.
We also offer row crop volutes that can be attached to existing orchard airblast sprayers for use in row crops.
74
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
A200-A500 MiniTower
REARS
Made in USA
NEW
NEW
Pul-Blast with
Grape Wall and Scoops
NEW
Pul-Blast with Grape Hood
NEW
Pul-Blast with
Grape Wall and Scoops
VINEYARD SPRAYERS
• Excellent for blueberries, blackberries,
raspberries, grapes and most trellised
fruits
• Quickly and easily mounts to any
Jacto A200 or A500 sprayer
• The miniTower utilizes the existing
16 flip over nozzle holders and
ceramic nozzles
• Engineered with precise air channels,
the MiniTower delivers uniform air flow
from top to bottom
• Made of HDPE and color matched to
the fan housing with UV protection
for long life and durability
• Tower dimentions: 64" x 40"
• When installed on the A500T
the overall height from the
ground is 80"
REARS
A Good Resource Book!
Effective Vineyard Spraying
Comprehensive resource for experienced and novice growers, crop
advisors, educators, and others. By Andrew Landers, Cornell University
REARS Trellis boom with
4 nozzle pipes on Nifty Pul Tank
BOK 0001
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
75
Made in USA
3 PT Sprayers
3 PT sprayers offer
superior maneuverability
and minimizing of
damage to crops,
particularly in postemergence spraying
applications. They are
excellent for farms with
smaller acreages or as
a secondary sprayer.
NEW
Sprayers can be customized to meet your needs with:
• 55 gallon to 300 gallon tank sizes
• Roller, centrifugal or diaphragm pumps
• Manual fold, hydraulic fold or 1-sided booms
• Single or triple nozzles
• Optional nozzle spacing on some booms
• Quick fill, rinse tank or hose and gun options
Download brochure
CROP CARE 3 PT BOOM SPRAYERS
30' Manual X-Fold Boom
• Heavy-duty powder coated frame
• Boom breakaway system
• Engineered to smoothly fold open or closed
• Standard 20" boom spacing optional 20-30"spacing
• Covers twelve 30" rows
25' Hydraulic Single-Sided Boom
• Coil spring suspension system helps keep
boom stable in uneven field conditions
• Covers ten 30" rows
• Hydraulic fold, leveling and height adjustments
• Height ranges from 24" to 84"
NEW
NEW
60' Hydraulic Fold Boom
• Heavy-duty powder coated frame
• Boom breakaway system
• Independent folding and leveling (uses existing Tractor Remotes for economical and reliable operation)
• Standard 20" boom spacing - optional 15" or 20-30" spacing
• Covers twenty-four 30" rows
NEW
Other boom sizes are available - call for details
76
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
Trailer sprayers offer large tank sizes
to cover the larger acreage farms, as
well as many options available for
operator efficiency and effectiveness.
Made in USA
NEW
Boom Control Options:
• Single or triple nozzle bodies
• Agressive jet agitation suspends chemical in water
• Hinged tank lid on 500, 750 & 1000
• Tool box
• Adjustable hitch height on larger sprayers
• Easy access service deck w/ flip-up steps
and handrail
• Fully adjustable axle spacing
• Boom suspension extension springs and shock
absorbers for smooth, cushioned ride.
• Manual flow control valves for ease and
simplicity (requires open station tractor)
• Electric controls use economical
solenoid valves or ball valves with
flowback design to reduce boom shutoff
time and decrease overlap
• Available with manual or auto rate
control
See it in action
NEW
CROP CARE TRAILER BOOM SPRAYERS
Standard Features on Trailer Sprayers:
Heavy-duty Powder Coated Steel Frame
All sprayers have a 2 year limited warranty
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
77
Made in USA
PR 2500 Plastic
Mulch Lifter
Wrapper
NEW
Standard Features:
CROP CARE VEGETABLE EQUIPMENT
• Heavy-duty powder coated steel frame
and components
78
• Easy to operate thumb controls
• Category I and II lift pins
• 2 Year Limited warranty
See this equipment in action
PA 1400
Picking
Assistant
NEW
Standard Features:
• Dual high torque gear
motors
• Long lasting 12V deep
cycle battery and
charger
• Durable, easy to clean
comfort pads
• All weather canopy
• Picking height
adjustment 20"-30"
• Width adjustment
36"-66"
• Ground speed
(approx) 22'/minute
• 2 Year Limited
Warranty
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
25' Hydraulic Single-Sided Boom Sprayers
Made in USA
NEW
Standard Features:
Allows highly targeted spraying for
weeds without harming your crop.
NEW
Standard Features:
• Heavy-duty powder coated steel frame
and components
• In-line filter system
• Quick attach non-drip nozzle bodies
• Jet agitation
• Wet-tested and ready to spray
• Choice of category I or II frame
• 2 Year limited warranty
• Shields are made of tough Lexon plastic
• A wheel on the front of the
shield allows it to follow the
ground for maximum
drift protection
CROP CARE 1-SIDED & SHIELDED BOOM
55, 110 Gallon
Shielded Sprayers
• Trailer or 3 PT Hitch mounted
• Heavy-duty powder coated steel frame and components
• Easy to operate manual or electric controls
• Boom break-away protection
• Quick attach non-drip nozzle bodies
• Dual jet agitation
• In-line filter system
• Wet tested and ready to spray
Download brochure
• 2 Year limited warranty
See it in action
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
79
The Low Profile Skid De-Icer Unit!
Main Features:
• Low profile, black powder coated frame;
anchors at each corner
• Compact design for installation in a
pick-up truck
• Two-inch Banjo poly centrifugal pump
• Honda 5.5 HP gas engine
MSS DC205GH • 205 gallons
MSS DC305GH • 305 gallons
Options:
MS/JOHN BEAN SPRAYERS
• SET BOOM-NO-VALV - 7 Nozzle Boom with 2 receiver mount
• SET 25-SALT-PILE - Kit with 25' hose to wet granular salt pile
• SET 25-REFILL-HS - Kit with 25' of 2" suction hose with
2" cam couplers
MSS P50 - 3 pt hitch sprayer, Cat #1
MSS R190 - with R15MV boom
Electric Green House Sprayer
30 gallon
with R12M 12' boom
MSS S110
Legendary John Bean Skid Sprayers
Positive displacement piston pumps available
from 5-60GPM up to 800PSI. Stainless steel,
fiberglass or poly tanks in single or multiple
versions. All steel skid frames and mechanical
agitation. Contact us for specifications.
We have a
huge inventory
of parts for older
and newer
John Bean
sprayers
John Bean multiple tank skid sprayer
600/200/200 gallon
Made in USA
80
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
Scan
for more
information
and product
video
Made
in USA
MOST POPULAR
NEW
NEW
With a base width of 38.5"
the V-100 ST fits well in
medium and full size trucks.
Hose reel can be mounted
under the pump/engine making
it a perfect fit in vans with side
door access to all controls
The V-200 ST fits well in a full size
pickup, leaving plenty of space for
other equipment or materials.
Standard features include:
• Honda Engines
• Udor Diaphragm Pumps
• Hannay Reels
• Poly tanks with jet agitation
• Powder coated steel frames
V-100 ST - 100 gallon
SPREADER-MATETM
V-200 ST - 200 gallon
Custom systems and
options available
ICE CONTROL SPRAYERS
NEW
Gregson-Clark
pre-wetting
systems are
available with
either tailgate
mount or
hopper sidemount tanks
Shown on LescoTM
The specially
molded,
9 gallon,
polyethylene tank
fits neatly into most
commercial
spreaders including
LescoTM, EarthwayTM
and SpykerTM. The pump, battery, filter, regulator, and
valves are all mounted on the tank, making it a selfcontained assembly. To install the unit, you need only
to "drop" the tank unit into the spreader, mount the quick
attach boom, and hook up the hose to the boom.
Both systems feature a weatherproof pump enclosure with a
pressure regulator and stainless steel pressure gauge.
GREGSON-CLARK SPRAYERS
NEW
The in-cab pump console has
indicator lights for "pump-on"
and low pressure.
Accessories
Truck mounted battery charger
Accumate 12-volt battery
charger
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
81
Potable Hot and Cold Water Pressure Washer and Ecological Weed Killer - All In One!
This versatile machine is a must for all Highway and Park & Recreation Departments
Geyser - Weed Killer
NEW
General Features:
• Frame with protection cage on two 10" tires
and two swivelling 10" tires with brake
• Loading hook
• Comet ceramic plunger crankshaft pump,
direct drive, 3450 rpm
• Soap injection in pressure washer mode
• 100-mesh filter at pump inlet
• 140°F pump thermal protector
• Pressure guage for pressure washer mode
• Pressure guage for weed killer mode
• Thermometer at heating coil outlet
• Manual reel with 50' of high pressure hose
• Spray gun and 44" totally insulated wand
• 4 quick disconnect spray tips for pressure
washing: rinse at 15°, 25° and 40°, soap at 65°
• 1 quick disconnect 2" standard tool for weed killing
• Storage compartment for weed killing tools,
spray tips and protection equipment
Water Heater Features:
• Oil-fired burner
• 37 litre polyethylene oil tank with level indicator
• High limit temperature switch
• 1/2" upright steel heating coil, schedule 80,
8" flue outlet, 5 year warranty
MSS GD3535G
WEED CONTROL/HOODED SPRAYERS
Ecological weed control and equipment cleaning!
Walk Behind Sprayer
Hose-fed & Electric Walk Sprayers
Electric Walk Sprayer
Hose-Fed Sprayer
WG3
WE3
• Durable, lightweight aluminum
and poly construction
• Patented airfoil
technology
• Easy to use valve
on handle with
quick connect camlock fitting
• Lightweight
aluminum frame
with poly hood for
durability
• 12 volt pump with
tray for battery
WG6
WE6
ROG WG3 - 36" spray width,
ROG WE3 - 36" spray width,
3 spray nozzles, flow indicator
ROG WG4 - 48" spray width,
4 spray nozzles, flow indicator
ROG WG6 - 72" spray width,
6 spray nozzles, flow indicator
3 spray nozzles, flow indicator
ROG WE4 - 48" spray width,
4 spray nozzles, flow indicator
ROG WE6 - 72" spray width,
6 spray nozzles, flow indicator
The S25 SprayPRO Mark III is a
revolutionary new
product designed to
take the work out of
spraying your
lawn, sidewalk,
driveways, paths,
and gardens. Use in
spring, summer, fall,
and for winter ice
control. Wi th a
s p ra y w i d th o f 2
- 5 feet, and up to a
11,600 sq.ft. coverage, the S25 will
make quick work
when spraying herbicides, pesticides, fungicides, fertilizer,
or liquid ice control products.
The adjustable height nozzle will reduce the spray width for narrow
banding operations. Having a 6.6 gallon capacity self-agitating tank,
the S25 will do the job of several tank sprayers without the pain of
carrying them in hand or on your back. With the ground driven
pump, and no battery, the S25 operates at walking speed and
pushes easily.
Designed for Commercial use, the S25 will perform under daily use
by contractors, as well as the occasional use of the homeowner with
equal results. When you need to apply a liquid in any season for any
reason, the S25 is there to help put an end to the work. Packaged to
ship UPS.
EAR S-25 • 32 lbs.
82
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
The PULMIPUR is an economical alternative to other more
expensive controlled droplet applicators. Designed for the small
grower or homeowner, the 6005 utilizes a spray shield to protect
your crop. Requires 2 "D" batteries (not supplied).
PULMIPUR
Hand Held CDA Sprayer
This ultra low volume hand held sprayer for use with RoundUp® or
other herbicides with little or no water, based on product labeling.
With a 1 liter chemical container this lightweight sprayer can go a
long way on a small amount of chemical. Only weighs 2 lbs.
empty.
VOL ITA-6005 - Hand held CDA sprayer • 2 lbs.
NEW
ATV Sprayers and Accessories
Spot Sprayers ... Great for treating small isolated areas.
For pesticides, herbicides or liquid deicing products
Order
Online
16 gallon sprayer
Tree Sprayer
26 gallon sprayer
26 Gallon
ATV Spot Sprayer
26 gallon poly tank.
Equipped as GPM 26810.
ATV Broadcast kit (not pictured)
14' spray pattern with just 1 nozzle.
Mounts to ATV hitch.
GPM 268120 • 27 lbs.
GPM 268195 • 10 lbs.
16 Gallon ATV Tree Sprayer
16 gallon poly tank. 12V, 2 GPM, 200
PSI Pumptec pump. 35'x3/8" hose with
spray gun. Sprays up to 30'.
GPM 268180 • 30 lbs.
MIGHTY MAC
Gasoline Powered Sprayer
• 3 1/2 HP Briggs &
Stratton 4 cycle
engine
• Hypro twin piston
pump, delivers
up to 3 gpm at
300 psi
• Direct drive from
engine to pump
• Durable 22 gallon,
200 mil polyethylene tank
• Pistol grip gun
• 25' high pressure
3/8" hose
• 5 1/2" diameter top opening for easy fill
• Rugged, heavy steel frame
• Pressure relief valve and stainless steel in-line strainer
• 10.5 x 3.5 turf type pneumatic tires on ball bearing wheels
• 39"L (plus tow bar) x 29"W x 38"H
• Weighs 120 lbs.
MSS
CARGO-50
12 Volt Skid
Sprayer
Also
available
with
100 gallon
or
200 gallon
tanks
MAC PS322T
• CARGO-50 sprayer for utility vehicle
• 50 gallon US polyethylene tank, 5" lid
• Agitation by venturi nozzle
• Tank drain
• 12 VDC Flojet diaphragm pump #4300-504,
4.5 gpm, 45 psi
• Remote switch
• Manual control, one valve for boom section,
glycerine pressure gauge
• 25' hose and gun with adjustable cone nozzle
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
WEED CONTROL/12V SPRAYERS
16 Gallon
ATV Spot Sprayer
Roundup Ready!
16 gallon poly tank, 2.2 GPM
Northstar pump, 60 PSI.
15'x3/8" hose and wand with
adjustable spray pattern.
Tie down straps included.
GPM 26810 • 25 lbs.
• Tree sprayers operate at higher
pressures, allowing for higher spray
heights and an atomized mist for
delicate flowers
• Small isolated areas like individual
weeds are more difficult to treat
• Tree sprayers are available in ATV
models and tow behind models
83
Over 50 years of
motorized backpack sprayers
451 Motorized Backpack Mist Blower
GAS POWERED SPRAYER
5 gallon gas powered backpack sprayer
with centrifugal pump. Sprays a mist
or combination stream to 20'
with optional gun. All seals
and O rings are Viton™,
21.2 cc 2 cycle engine,
5 gallon formula tank with
145 psi maximum pressure.
NEW
ECH SHR-210
21cc/5 gallon sprayer • 17.1 lbs.
X-PERT®
HAND
SPRAYER
Viton equipped, 2.6 quart poly pump, poly tank.
GRE 99142 - 2.6 quart • 1.6 lbs.
The new 66.5cc engine with nickle/silicon carbide cylinder
coating gives increased performance.
Polypropylene design. Working pressure - 60 psi Tank
capacity - 48 oz.
TRU P-50-Y • 1.6 lbs.
Along with the high output 824 CFM fan, this powerful
backpack sprayer gives higher misting performance for total
plant penetration.
Large 0.5 gallon capacity fuel tank combined with low fuel
consumption allows long operating periods (more than
80 minutes without refueling). QUIET! Low dB(A) rating.
BACKPACK SPRAYERS/CF VALVES
Compact size and lightweight
SOL 451 • 23 lbs.
Constant Flow Valve
TROMBONE SPRAYERS fOR
Spray the precise amount of chemical with the
addition of a CFValve™ to the delivery system of
a backpack, hand held, compression, 12V or field
sprayer. Both the flow and pressure are controlled
and additionally, the flow is shut off when the
pressure drops below the pre-set feature of the
valve. The valve must be ordered by thread size
and pressure range.
Weight= .1 lb. each.
SPRAY OR fIRE PROTECTION
Shoots up to 25'. Nickel plated brass barrel
GRE 61224 - adjustable gun and grip • 2.6 lbs.
Stainless Steel Sprayer
An attractive alternative for a
variety of spraying tasks. Perfect
for pesticides, herbicides, and
many harsh chemicals.
• Corrosion resistant stainless
steel tank
• Extra large T-style handle
allows two-handed pumping
• 28" Durable brass wand and
brass adjustable nozzle
• 48" Reinforced nylon hose
provides extended reach
• Multiple nozzles included: flat fan,
jet stream, hollow cone, and brass
adjustable nozzle
CFValve™
See chart below for thread and pressure range.
Use YELLOW & RED valves in backpack and compression sprayers.
Use GREEN & BLUE valves in 12V/ on-demand systems, boom sprayers or engine driven pumps
Back Pack
Sprayer Model
YELLOW
14.5 PSI
RED
21 PSI
BLUE
29 PSI
GREEN
43.5 PSI
Solo, Lesco,
any 3/8 BSP thread
SOL Y 3/8 BSP
SOL R 3/8 BSP
SOL B 3/8 BSP
SOL G 3/8 BSP
GRE 98661V
GRE 98662V
SOL B11-16SY
SOL G11-16SY
Hudson, Jacto, SP,
any Spraying Systems
component thread
SOL 465 Stainless Steel Sprayer • 7 lbs.
84
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
Features:
Knapsack Sprayers
• UV resistant, high density
polyethylene tanks, commercial
grade wands, nozzles, hoses, &
valves
• Chemical resistant Viton® seals.
• Pump on the go feature: pump
while on your back
• 4 nozzle assortment
• Left or right hand pump handle.
4 gallon piston pump
SOL 425
5 gallon piston pump
SOL 435
3 gallon diaphragm pump
SOL 473D
SOL 425 - 4 gallon piston pump,
90 PSI • 11 lbs.
SOL 425DLX - 4 gallon piston
pump deluxe package includes
folding handle, pressure gauge,
5 gallon diaphragm pump
relief valve in tank and brass
SOL 485
adjustable nozzle • 11 lbs.
SOL 435 - 5 gallon piston
pump • 14 lbs.
SOL 475 - 4 gallon diaphragm
pump, 60 PSI • 11 lbs.
SOL 475DLX - 4 gallon diaphragm
pump and same features
as 425DLX • 11 lbs.
SOL 485 - 5 gallon diaphragm
pump • 14 lbs.
SOL 473D - 3 gallon diaphragm
pump • 11 lbs.
SOL 473P - 3 gallon piston
pump • 11 lbs.
4 gallon diaphragm pump
SOL 475
piston
diaphragm
pump
3 gallon piston pump
SOL 473P
Compression Style Sprayers
• Easy fill funnel top
• High capacity pump for quick pressurization
• 48" hose and 28" wand • 4 nozzle assortment
• Pressure relief valve
• Large second opening for cleaning
SOL 430-2G
SOL 430-3G
1 gallon • 3 lbs.
2 gallon • 4 lbs.
3 gallon • 5 lbs.
Common parts and accessories
Description
Fits
Diaphragm Pump Repair Kit
475, 485, 473D
Piston Pump Repair Kit
425, 435, 473P
Brass Adjustable Nozzle Kit
All
Shut-off Valve
All
28" Universal Wand Assembly
All
Pressure Gauge
All
Pump Repair Kit
454, 456, 457
20" Brass Wand
All
Drift Guard
All
Plastic Adjustable Nozzle
All
60" Brass Wand
All
Pro-Spot Drift Guard
All
Drift Guard
SCC 11/16 thread
HD400 Internal Pump Backpack Sprayer
with Paddle Agitation
NEW
The first fully internal pump mechanism keeps the solution off the operator.
Independently tested for 1500 hours of use with no breakdowns. You get a
unit that's ruggedly built at a great price.
• Mechanical agitation helps to
• Heavy-duty trigger valve
keep wettable powders in suspension • Reinforced nylon spray lance
• Lightweight
• Comes with 3 different nozzles
• Wide filling opening
• Flat bottom base
• 4 gallon ergonomically curved tank
• Easy operating pumping lever
• 4'5" high pressure hose
• Internal, high-efficiency piston pump
• Padded shoulder straps
• Carrying handle
JAC HD400
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
SOLO/JACTO/SP BACKPACK SPRAYERS
SOL 430-1G
Part #
SOL 0610406-K
SOL 0610407-K
SOL 0610410-P
SOL 4800170
SOL 4900170N
SOL 4900356
SOL 4900405-K
SOL 4900421
SOL 4900430
SOL 4900527
SOL 4900528
SOL 4900626
DBS 1085
SP Systems EcoScape
• Fold back tubular
handle for easy
storage Ergonomic design
• Piston - external
pump capable of
120 PSI
• 6" wide mouth lid
• 4 gallon blow
molded tank
with Viton Seal
• Shoulder straps with rubber pads
• Adjustable plastic nozzle
• Fiberglass wand
SP ECOSCAPE • 11 lbs.
85
®
®
SRS-600 PROPACK™
The electric SRS600 offers convenience, versatility,
and comfort in a back pack sprayer. Propack
eliminates the need for the operator to continually
“Pump Up" the sprayer to maintain a steady spray
pattern as with manual sprayers, making spraying
faster and easier. It works well with many materials
including herbicides, insecticides and anti-icing liquids.
HYP 2088-313-145 Standard pump 12v DC,
3.6 GPM, open flow (2.6 [email protected] psi) 45 psi
demand switch, 1/2" MSPT ports.
HYP 2088-394-144 Standard pump with 6' power
cord, 115 V AC, 7 amps, 3.0 GPM, 45 psi demand
switch, 1/2" MSPT ports.
HYP 4211-035 Power twin, 12 v, DC, 8.7 Amps,
6.25 GPM open flow (3.5 [email protected] psi) demand
switch, 1/2" MPT ports.
HYP 8000-543-220 Standard bypass pump
1.5 GPM open flow, 60 psi internal bypass
3/8" NPTF ports.
HYP 8030-813-239 High pressure pump,
1.6 GPM open flow, (.83 GPM @ 150 psi)
demand switch, 3/8" NPTF ports.
90° Swivel Pump Fittings
Features:
• Sprays up to
120 gallons on
a single charge
• High performance
chemical resistant
SHURflo pump
• Variable speed
and adjustable
nozzle for light or
heavy duty spraying
• Ultra comfortable ergonomic
design, full back pad, and thickly
padded shoulder harness
• Adjustable spray tip provides a uniform cone
pattern
• Heavy duty hand lever can be locked in the open
position reducing operator fatigue
• 24" spray lance provides easy reach for accurate
spraying
• 4 gallon polyethylene tank
HYP SRS-600 - 12 volt sprayer • 15 lbs.
HYP 234-3916 - 1/2 FPTx3/8 Barb
HYP 234-3926 - 1/2 FPTx1/2 Barb
HYP 234-3936 - 1/2 FPTx5/8 Barb
HYP 234-3946 - 1/2 FPTx3/4 Barb
1/2" polynap
reversible clear plastic
elbow provides
180° rotation of pad for
new wiping area
Whether you are a professional
grower or a weekend gardener
Sideswipe™ has a place
in your weed control
program.
1 qt.
60 psi demand switch, 3/8" NPTF ports
ndle -
HYP 8000-543-236 Standard pump 12v, 1.8 GPM,
oir ha
12 Volt
Electric
Sprayer
1.0 GPM, 60 psi demand switch, 3/8" NPTF ports
reserv
HYP 8000-541-236 Lawn and garden pump 12v,
12V SPRAYERS/WEED WIPERS
The original hand-held herbicide wipe-on
applicator is easier than hoeing and safer
than spraying; designed to apply systemic
herbicides only where you need them, on
the weeds. Sideswipe's™ patented design
delivers just enough chemical to do the job.
removable guard used when
underneath desired plants
Shurflo Pumps
The Sideswipe™ applicator has many unique
features that make it superior to competitive
applicators.
• Convenient, easy to use
• Puts the herbicide where you want it
• No drift - usable on a windy day
• No leaching
• Unique nylon nap pad wets evenly every time
• All parts are replaceable and available as parts
• Not for use with oil based products.
Design details:
• Reservoir handle - 1 qt. capacity, 52" handle
• Nose threaded fitting allows insertion of
shut-off valve
• Reversible clear plastic elbow indicates fluid
level & gives 180° rotation of pad for new wiping
area & longer pad life
• 1/2" polyester nap wiper pad with auto feeding
• Protective shield for wiping underneath desirable
plants
Straight Swivel Pump Fittings
HYP 234-2916 - 1/2 FPTx3/8 Barb
HYP 234-2926 - 1/2 FPTx1/2 Barb
HYP 234-2936 - 1/2 FPTx5/8 Barb
HYP 234-2946 - 1/2 FPTx3/4 Barb
SID THS-200 - 6" Sideswipe • 1.2 lbs.
SID TH-204 - 6" replacement pad • .5 lbs.
SID TH-S100 - 9" Sideswipe • 1.4 lbs.
SID TH-104 - 9" replacement pad • .5 lbs.
NEW
NSQ Series
12V
On-Demand
Diaphragm
Pumps
A
B
A. GPM 2682271 - 2.2 GPM/70 PSI, 3/8" NPT ports
B. GPM 2683061 - 3.0 GPM/60 PSI, 1/2" NPT ports
B. GPM 2684061 - 4.0 GPM/60 PSI, 1/2" NPT ports
B. GPM 2685561 - 5.5 GPM/60 PSI, 1/2" NPT ports
86
52" long
CYLINDRICAL SPONGE APPLICATOR
NO DRIPPING OR DRIfT!
There are many Super Sponge®
models and sizes to choose from!
Call for information
Each complete Super Sponge® comes with:
• Heavy-duty, steel frame
• Corrosion-resistant plumbing
• Protective netting for the sponges
• Tank shut-off and stainless steel filter screen
• Translucent tank
• Sight glass manifolds that allow precise flow
metering
• Made by Smuckers manufacturing
SuPER SPONGE® kITS
Super Sponge® is also available in kit form.
Each kit comes complete with plumbing,
sponges and tank. All you supply are the
wheels and frame! 5', 10' and 15' sizes.
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
The reel leader.
Hannay hose reels come
in many sizes and capacities.
Hannay Reels is the leading manufacturer of
high quality hose and cable reels for most every
conceivable application. This page describes
and gives specifications on our most popular hose reels.
If you don't find what you're looking for, give us a
call and we will help you meet your needs.
Series 6000
Series 1500
Series 1800
Inlet: Standard inlet is 90°
ball bearing swivel joint
with 1/2" female NPT
threads.
Outlet: Standard outlet is
3/4" male GHT threads.
Operating Pressures to 3000 psi
Hose capacity of reel
MODEL
Inlet: Standard inlet
is a 90° ball bearing swivel joint
with 1" female
NPT threads.
Outlet: standard outlet is
3/4" female GHT threads.
Operating Pressures to 1000 psi.
Inlet: Standard inlet
is 90° ball bearing
swivel joint with
1" female NPT threads.
Outlet: Standard
outlet is 3/4" male GHT threads.
Operating Pressures to 1000 psi
Hose capacity of reel
1/4" I.D. 3/8" I.D. 1/2" I.D. 5/8" I.D.
5/8" O.D. 3/4" O.D. 7/8" O.D. 1" O.D.
MODEL
5/8" I.D.
1" O.D.
Hose capacity of reel
3/4" I.D.
1-9/32" O.D.
MODEL
1/2" I.D.
7/8" O.D.
3/4" I.D.
1" I.D.
1-9/32" O.D. 1-9/16" O.D.
1514-17-18
175 ft.
125 ft.
75 ft.
50 ft.
1816-17-18
75 ft.
50 ft.
6024-19-21
235 ft.
125 ft.
60 ft.
1520-17-18
350 ft.
275 ft.
175 ft.
125 ft.
1822-17-18
150 ft.
100 ft.
6032-19-21
350 ft.
200 ft.
100 ft.
1526-17-18
500 ft.
400 ft.
300 ft.
200 ft.
1826-17-18
200 ft.
125 ft.
6024-23-24
450 ft.
185 ft.
100 ft.
1530-17-18
—
500 ft.
375 ft.
275 ft.
1830-17-18
275 ft.
150 ft.
6030-19-21
—
250 ft.
150 ft.
1536-17-18
—
—
475 ft.
350 ft.
1836-17-18
350 ft.
200 ft.
6038-19-21
—
350 ft.
200 ft.
HAN 9927.8551 - Replacement swivel 1/2"
HAN 9929.8551- Replacement swivel 1"
HAN 9929.8551- Replacement swivel 1"
Portable Garden Hose Reels ... for grounds maintenance and home use
HANNAY HOSE REELS
Series GH1100
Inlet: Standard inlet is 90° ball bearing
swivel joint and 1/2" female NPT threads
Outlet: Standard outlet is male GHT threads.
Operating Pressures to 3000 psi.
Hose Capacity: 3/8"(I.D)/300 ft.
1/2"(I.D.) /200 ft. 5/8"(I.D.) /150 ft.
HAN GH1100
HAN 9927.8551 - Replacement swivel 1/2"
Series GHAT1200
Inlet: Standard inlet is 90° ball bearing
swivel joint with 1" female NPT threads.
Outlet: Standard outlet is male GHT threads.
Operating Pressures to 1000 psi.
Hose Capacity: 1/2"(I.D.) /375 ft.
5/8"(I.D) /200 ft. 3/4"(I.D.) /150 ft.
1"(I.D.) /100 ft.
HAN GHAT-1200
HAN 9929.8551 - Replacement swivel 1"
FH-3 Roller and Spool Assembly
Speeds handling and reduces hose
wear. Buffed stainless steel rollers
resist corrosion, pitting and abrasion.
Polished, chrome-plated spools and
blocks add lasting beauty to your
equipment. Delrin bearing surfaces
assure quiet operation and minimum
wear.
Utility Hose Rollers
Stainless steel rollers and cast alloy brackets for
use on the reel, on cabinet door openings, truck
platforms and similar locations where sharp
edges may cut or damage hose/cable.
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
87
Polmac Control Units
These units have been designed
and manufactured with special
materials suitable for any application in the
field of crop spraying and protection. The
nylon and stainless steel components are
highly practical, corrosion-proof and resist
the corrosive action of sprayed chemicals
and liquid fertilizers. Contact us for sizing to
your sprayer.
Pony Flow
Plus 12 V
ELECTRONIC
DIGITAL METERS
Cab mount
displays for
flow meters.
Many options available.
Features flow rates and
totals, ground speed,
pressure, and/or control of
12V DC motor drive valve.
Call for application and part
numbers.
Aluminum turbine
meter with LCD
readout for
gallons with 1"
NPT threads.
0.3-3 GPM. Field replaceable batteries.
Factory and field calibration. 300 PSI max.
GPI 113900-9500 • 2 lbs.
Aluminum turbine meter with LCD readout for
gallons with 1" NPT threads. 3-50 GPM. Field
replaceable batteries. Factory and field calibration. 300 PSI max.
Pro-Flow
4 Valve
controller
with unloading
relief valve and
gauge
POL 00280004
Pro-Flow 1
4 Valve controller with
unloading relief valve, bypass
metering valve and gauge
Nylon turbine meter for 0.3-3 GPM. LCD
readout. Field replaceable batteries. Factory
and field calibration. 1" NPT. 150 PSI max.
GPI 113900-9510 • 1 lb.
Nylon turbine meter for 3-50 GPM. LCD
readout. Field replaceable batteries. Factory
and field calibration. 1" NPT, 150 PSI max.
GPI 113900-9511 • 1 lb.
Stainless steel turbine meter for 3-50 GPM.
LCD readout. Field replaceable batteries.
Factory and field calibration. 1" NPT,
800 PSI max.
GPI G2S10N09GMA • 7 lbs.
Part #
(A) Signal (B) Signal
1 1/2"
12 Vcc.
0 Vcc.
POL 00379007
2"
12 Vcc.
0 Vcc.
POL 003790G2
Pro-Flow 2
(A) Signal
(B) Signal
1 1/2"
12 Vcc.
0 Vcc.
POL 00379010
2"
12 Vcc.
0 Vcc.
POL 003790G3
Part #
(A) - Output signal with throttle valve open
(B) - Output signal with throttle valve closed
POL 00304304
FLOW METERS/CONTROLS
GPI 113900-9501 • 2 lbs.
This is a 1 1/2" or 2" (9 to 90 gpm),
250 psi maximum, programmable
stop flow meter.
The operator
programs the
set amount,
manually opens
the valve, and
when the
desired amount
is reached the
valve automatically
closes. Comes as
compact (1) or
remote (2). Great for
filling spray tanks.
Nozzles for Washing
Containers
Pony Flow 9V Sensor/Counter
For use with Polmac flow meters. Can be mounted
directly to body of the flow meter or remotely
mounted. Functions include Start, Stop, Auto On,
Auto Off, Running Total and Final Total. Measures in
US gallons, Imperial gallons or liters. Up to
99,999,999 units.
Model
Order #
Used to clean chemical products
out of emptied containers before
they are disposed. Consists
of a central shaft on which rotates a
fluid activated nozzle that is able to
rotate through 360° to spray the
inner surfaces of the container.
POL 63408499 - Rotating
Extractable (1)
POL 6340849S - Slim Rotating
Extractable (2)
POL CH370001
Pony Flow 4C
POL CH37000C
STANDARD >3/4"
30306032.DEU
Pony Flow
4 Remote
POL CHRE0001
RAPID CHECK
41308899.DEU
(2)
Used to clean chemical products out of tanks and
mixers. Its fluid activated rotating head covers
360° and performs a complete wash. It delivers
7.4 gallons per minute at 70 PSI.
Digital speedometer and acreage counter.
12V operation from the vehicle battery,
magnetic wheel or drive shaft pickup.
Holds two acreage counts in memory.
Measures speed, area and distance.
This device includes a console, speed
sensor and installation hardware and
instructions.
MIC 01000 - Calc-an-acre II
POL 63408399
POL 6340839R
Visit our website at
www.oescoinc.com
ST. 1/2"-3/4" INOX - 1/2' NYLON
30306032.CDE
Get more information
Order online
POL 63408399
88
(1)
Nozzles for Washing Tanks
Flow Meter
Sensor
Pony Flow 4
CALC-AN-ACRE® II
SPEED AND ACREAGE MONITOR
POL 6340839R
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
HIGH DENSITY, ROTO MOLDED POLY TANkS
POTABLE WATER • CHEMICALS • SAP • CIDER • fERTILIzERS
THERE'S juST NO SuBSTITuTE fOR SNYDER TANkS.
Made in USA
Some of our more popular stock items - Contact us for a complete catalog of all SYNDER products
PCO TANKS
PART #
GALLONS
OUTLET SPECS
DIAMETER
HEIGHT
LENGTH
TAN 109137
30 gallon
U
19"
22-1/2"
24-1/2"
TAN 117137
50 gallon
U
19"
22-1/2"
38"
TAN 120137
100 gallon
U
30"
31"
38"
TAN 157137
150 gallon
U
36"
29"
48"
TAN 166137
200 gallon
U
36"
39-1/2"
48-1/2"
TAN 172137
300 gallon
U
38"
36-3/4"
69"
• Molded-in gallonage markers (indicators)
• Flat spots on each for easy agitation
• Design requires no additional support or banding
• UV inhibitors are molded in for longer tank life
LEG TANKS
• Molded-in gallonage markers (indicators)
• Free standing HLT requires no cradles for
support
• Ribbed for strength with built-in supports
• UV inhibitors are molded in for longer tank life
PART #
GALLONS
OUTLET SPECS
DIAMETER
HEIGHT
LENGTH
TAN 10837
30 gallon
G
23"
25-3/4"
19-1/2"
TAN 10637
60 gallon
A
23"
25-3/4"
38"
TAN 11237
125 gallon
S
30"
34-1/2"
50"
TAN 12237
200 gallon
S
41"
31-3/4"
54"
TAN 12837
230 gallon
S
38"
42-1/2"
52"
TAN 13237
300 gallon
S
38"
42-1/2"
72"
TAN 14037
525 gallon
E
48"
52-1/2"
75"
TAN 13637
730 gallon
E
57-1/2"
57-1/2"
80"
VERTICAL TANKS
GALLONS
OUTLET SPECS
DIAMETER
HEIGHT
550 gallon
N1
64"
46"
TAN 18037
550 gallon
N1
48"
74"
TAN 18337
1100 gallon
64"
90"
TAN 17137
1100 gallon
N2
I
86"
56"
TAN 17737
1500 gallon
I
86"
73"
TAN 741018
3000 gallon
N2
102"
97"
SNYDER TANKS
• Heavy duty bolted fittings standard on 550
gallon and above to reduce threat of fitting
loosening during use
• Fitting compatible siphon tubes to allow bottom
to fill of tank
• Molded-in tie downs for securing and lift lugs
for easy movement
• UV inhibitors molded in for longer tank life
PART #
TAN 18237
OUTLETS
A=6" fill, one 3/4" outlet with anti-vortex
C=10" fill, two 1-1/4" outlet (1 with anti-vortex)
U=No holes or fittings, Fittings can be ordered
separately
E=10" fill, one 2" HD outlet with siphon
N2=18" manway, one 2" bolted outlet with siphon
N1=18" manway, one 2" HD outlet with siphon
G= 6" cap, no outlet
S= 10" fill, one 1 1/4" outlet
I= 10" fill, one 2" bolted outlet with syphon tube
HORIZONTAL TANKS
PART #
TAN 10337
TAN 10537
TAN 11137
TAN 11337
TAN 11537
TAN 12337
TAN 12537
GALLONS
25 gallon
55 gallon
110 gallon
150 gallon
150 gallon
200 gallon
200 gallon
OUTLET SPECS
A
A
C
C
C
C
C
Snyder Standard Bulkhead
Fittings (With EPDM gaskets)
SNY 340001
SNY 340002
SNY 340003
SNY 340004
3/4"
1"
1 1/4"
1 1/2"
DIAMETER
23"
23"
30"
30"
32"
32"
38"
HEIGHT
26-3/4"
38-1/4"
49-3/4"
34-3/4"
36-1/2"
36-1/2"
40-1/2"
LENGTH
19"
38"
50"
60"
56"
71"
52"
IBC Tank Access Adapter
2" Buttress x 2" Male
NPT threads with
Santoprene gasket
BJO TA283
• 10" threaded cap for easy filling
• Molded-in gallonage markers (indicators)
• Center sumps and end flat spots
• UV inhibitors molded in for longer tank life
• Cradles required for support
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
89
®
We service most models of commercial
and agricultural spray pumps.
WP-1000 PORTABLE PuMP
Good for tank
filling, maple sap,
garden or
small plot
irrigation.
2" Self-priming
Aluminum
Transfer Pump
2" Self-priming
Polypropylene
Transfer Pump
With 3 vane impeller, powered by 5.5 HP PowerPro
gas engine with low oil sensor. 150 GPM - max.
HYP 1542P-55SP • 49 lbs.
Powered by a 4 HP Honda. GX120 gas engine with oil
alert. Mounted in a protective cage. 145 GPM - max.
HYP 1572-SPX • 55 lbs.
2" PuMP HOSE COMBO kIT
Includes suction strainer, Two 2" nipples, a 2" x 20' suction hose
and a 2" x 25' discharge hose. Tough PVC hoses have male
and female standard pipe thread couplings.
GPM 108999 • 27 lbs.
• Echo 21.2 cc engine with Pro-Fire™
Electronic Ignition
• Cast iron volute
• Ideal for around-home use - draining pools,
pool covers, irrigating lawns and gardens
• Discharges up to 28 gal/min., 1680 gal/hr
• Unit complete with suction hose and strainer
ECH WP-1000 • 11.9 lbs.
Myers-Aplex Piston Pumps
Built for field serviceability. Continuous splash lubrication.
Pressures up to 800 P.S.I and flows to 60 G.P.M.
Ceramic coated cylinders for durability.
SALES • SERVICE • PARTS for old and new Myers pumps
uDOR DIAPHRAGM & GAMMA SERIES
PLuNGER PuMPS AND ACCESSORIES
SALES - SERVICE - PARTS available
fRAME MOuNTED CENTRIfuGAL PuMPS
Special models available. ALL parts available for
ACE pumps. Contact us for specifications on pumps.
PUMPS/COUPLERS
Cast iron,1 1/2" suction x1 1/4" discharge, clockwise rotation
ACE FMC-CW-150
fMC/jOHN BEAN PISTON PuMPS
Cast iron, 2" suction x1-1/2" discharge, clockwise rotation
These pumps were made under the two
names of FMC and Bean. We service, sell
and stock parts for these pumps, old and
new models.
ACE FMC-CW-200
Cast iron,1 1/4" suction x1" discharge, counter-clockwise rotation
ACE FMC
Cast iron,1 1/2" suction x1 1/4" discharge, counter-clockwise rotation
SALES - SERVICE - PARTS
for FMC/John Bean Pumps
ACE FMC-150
Cast iron, 2" suction x1 1/2" discharge, counter-clockwise rotation
ACE FMC-200
DIAPHRAGM & PLuNGER PuMPS
Call for other model
number specifications
PuMP
ADAPTERS
Solid Steel Push Pin Design
®
Quick Couplers
(Female to Female)
SALES, SERVICE
and PARTS
available for
Comet Pumps
HYP 1323-0072 - 13/8" PTO - 6 spline (I.D.),
15/16" Pump end (I.D.) forged steel, 540 RPM
HYP 1323-0073 - 13/8" PTO - 21 spline (I.D.),
15/16" Pump end (I.D.) forged steel,1000 RPM
HYP 1323-0074 - 13/8" PTO - 6 spline (I.D.), 5/8"
Pump end (I.D.) forged steel, 540 RPM
HYP 1323-0075 - 13/8" PTO - 21 spline (I.D.),
5/8" Pump end (I.D.) forged steel, 1000 RPM
90
Stock
Spline Round Keyway Wt.
Number
Bore
Bore
Size
Lbs.
GAG 114-1000 1 3/8x6
5/8
3/16
2.13
GAG 114-1200 1 3/8x6
3/4
3/16
2.07
1 3/8x6
7/8
2.00
2.00
GAG 114-1500 1 3/8x6
15/16
3/16 &
1/4
1/4
GAG 114-1600 1 3/8x6
1
1/4
GAG 114-1400
1.94
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
ROLLER PUMPS
OESCO, Inc. is the
Northeast Distributor
for Hypro.
MODEL
Call one of our pump
specialists for your parts &
service needs.
®
PUMPS
PISTON PUMPS
MODEL
HYP 5315C-X
HYP 5320C-X
HYP 5325C-X
HYP 5330C-X
HYP 5315C-HX
HYP 5320C-HX
HYP 5325C-HX
HYP 5330C-HX
HYP 5206C
HYP 5206C-H
HYP 5210C
HYP 5210C-H
HYP 6500C
MAX GPM
21.8
MAX PSI
300
MAX RPM
1200
SHAFT INPUT
5/8" solid shaft
5/8" solid shaft
HYP 6500N
21.8
300
1200
HYP 6500XL
21.8
300
1200
5/8" solid shaft
HYP 7560C
22.5
300
1200
15/16" solid shaft
HYP 7560N
22.5
300
1200
15/16" solid shaft
HYP 7560XL
22.5
300
1200
15/16" solid shaft
HYP 4001C
9.1
150
1800
5/8" solid shaft
HYP 4001N
9.1
150
1800
5/8" solid shaft
HYP 4001XL
9.1
150
1800
5/8" solid shaft
MAX GPM MAX PSI
1.5
500
2.2
500
2.5
500
3
500
1.5
500
2.2
500
2.5
500
3
500
8
400
8
400
10
400
10
500
MAX RPM
1800
1800
1800
1800
1800
1800
1800
1800
800
800
600
600
SHAFT INPUT
5/8" OD solid shaft
5/8" OD solid shaft
5/8" OD solid shaft
5/8" OD solid shaft
5/8" ID hollow shaft
5/8" ID hollow shaft
5/8" ID hollow shaft
5/8" ID hollow shaft
1" solid shaft w/base
1 3/8" hollow shaft w/base
1" solid shaft w/base
1-3/8" hollow shaft w/base
DIAPHRAGM PUMPS
MODEL
MAX GPM MAX PSI
6.1
290
HYP 9910-D252
MAX RPM
650
PORT SIZE
1-1/4" HB inlet, 1" HB outlet
SHAFT INPUT
3/4" solid keyed shaft
HYP 9910-D252GRGI
6.1
290
2800
3/4" HB inlet, 3/8" HB outlet
3/4" hollow shaft
HYP 9910-D252GRGI58
5.5
290
3600
3/4" HB inlet, 3/8" HB outlet
5/8" hollow shaft
MODEL
HYP 9910-D30
MAX GPM MAX PSI MAX RPM
9
580
550
PORT SIZE
1-1/4" HB inlet, 1" HB outlet
Same pump as 9910-D30 with 3/4" solid thru shaft
HYP 9910-D30APA
HYP 9910-D30GRGI
9
580
HYP 9910-D50
14
580
3600
Assembled w/ gearbox 9910-KIT1640 and control
9910-GS40GI for mounting on 5HP gas engine
550
1-1/4" HB inlet, 1/2" HB outlet
SHAFT INPUT
Select Kit
Select Kit
Select Kit
Select Kit
Same pump as 9910-D50 w/Buna-N diaphragms
Select Kit
HYP 9910-D50APA
Same pump as 9910-D50 w/solid thru shaft
Select Kit
MODEL
HYP 9910-D70
MAX GPM MAX PSI
19
290
MAX RPM
PORT SIZE
SHAFT INPUT
550
1-1/4" HB inlet, 1" HB outlet Select shaft kit for desired drive
HYP 9910-D115
30.1
290
550
1-1/2" HB inlet, 1" HB outlet Select shaft kit for desired drive
HYP 9910-D135
34.8
290
550
1-1/2" HB inlet, 1" HB outlet
1-3/8" — 6 splined male shaft
PORT SIZE
SHAFT INPUT
1-1/2" HB inlet,
3/4" NPT outlet
1-3/8" — 6 splined male
double-ended shaft
MODEL
HYP 9910-DBS140
HYP 9910-DBS160
HYP 9910-DBS200
MAX GPM MAX PSI MAX RPM
37.8
725
550
39.6
49.7
725
725
550
550
HYPRO PUMPS
HYP 9910-D50B
CENTRIFUGAL PUMPS
MODEL
MAX GPM
MAX PSI
MAX RPM
SHAFT OUTPUT
HYP 9202C
103
170
6000
5/8" solid shaft
HYP 9203C
140
170
6000
5/8" solid shaft
HYP 9202S
103
170
6000
5/8" stainless steel shaft
HYP 9203S
140
170
6000
5/8" stainless steel shaft
MODEL
MAX GPM
MAX PSI
MAX RPM
PTO OUTPUT
HYP 9402C-540
76
95
600
1-3/8" female, 6-spline shaft
HYP 9402C-540Q
76
95
600
1-3/8", 6-spline Quick Coupler
HYP 9403C-540Q
140
104
600
1-3/8", 6-spline Quick Coupler
HYP 9403C-1000
140
104
1000
1-3/8" female, 21-spline shaft
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
91
Pressure Relief/Regulating Valves
Model 6815
Valve #
PISTON TYPE
MODEL 6815
• Brass with stainless
steel springs
• Models with light spring
(50psi) for use with XR
TeeJet® and LP
TeeJet® tips and
other low pressure
systems
• Use HSS models for
longer lasting valve
Model 8460
Recommended
Pressure Range
SSC 6815-1/2-50
Up to 50 psi
SSC 6815-1/2-300
Up to 300 psi
SSC 6815-1/2-700
300 - 700 psi
SSC 6815-3/4-50
Up to 50 psi
SSC 6815-3/4-300
Up to 300 psi
SSC 6815-3/4-700
300 - 700 psi
SSC 6815-1/2-HSS-300
Up to 300 psi
SSC 6815-1/2-HSS-700
300 - 700 psi
SSC 6815-3/4-HSS-300
Up to 300 psi
SSC 6815-3/4-HSS-700
300 - 700 psi
DIAPHRAGM TYPE MODEL 8460
Nylon inlet body with aluminum
bonnet. Choice of 1/2" or 3/4"
NPT (M) inlet and (F) outlet
connections. Flow rates to
70 GPM for 3/4" size. Pressures
to 50 & 300 psi.
Model 23120
MODEL 23120
302 stainless steel spring and
EPDM O-ring. Excellent chemical
resistance. 1/4" port for pressure
gauge pipe plug included.
Polypropylene.
MODEL 23120A
Same as 23120 but with 316SS
spring and Viton O-ring
Valve #
SSC 8460-1/2-50
Inlet & Outlet
Pipe Connection Size
1/2" NPT
1/2" NPT
Net
Weight
1 1/4 lbs.
3/4" NPT
3/4" NPT
NPT
1/2"1/2"
NPT
NPT
NPT
3/4"3/4"
Inlet & Outlet
Pipe Connection Sizes
1/2" NPT
Rec. Pressure
Range
Net
Weight
Up to 50 psi
14 oz.
SSC 8460-3/4-50
3/4" NPT
Up to 50 psi
14 oz.
SSC 8460-1/2
1/2" NPT
Up to 300 psi
14 oz.
SSC 8460-3/4
3/4" NPT
Up to 300 psi
14 oz.
Valve #
* Inlet & Outlet
Pipe Connection Sizes
Pressure
Range
Net
Weight
SSC 23120-*-PP
1/2" or 3/4"
150 PSI (10 bar)
8 oz.
SSC 23120A-*-PP
1/2" or 3/4"
150 PSI (10 bar)
8 oz.
RELIEF/CONTROL VALVES
ALSO AVAILABLE SPECIAL ORDER - Models for high pressures up to 1200 psi
6B DIRECTOVALVE®
• Molded of corrosion-resistant
materials, all wetted parts are
polypropylene, stainless steel
and polyethylene
• Maximum pressure of
150 PSI
• Large capacity, 12 GPM
at 5 PSI pressure drop
• Molded-in mounting
flange and 1/4" NPT gauge port
• 3/4" inlet 1/2" boom connection
SSC AA6B
HAMILTON BYPASS AND RELIEf VALVES
Compact brass valve has spring
and stainless steel ball for valve.
Tee handle with locking nut to
set pressure. Available in 1/2"
and 3/4" MPT and spring range
0 - 300 PSI or 0 - 600 PSI.
Bypass connector 1/2 or 3/4" FPT.
AA17 TEEVALVE®
CONTROL VALVE
• Raise lever
to open, lower
to close valve
• Aluminum
construction with
corrosion resistant internal parts
• Lift off poppet valves for positive
ON-OFF action
• Cam type index tip assures
exact position of valve
• Dimensions: 4" wide x
4 1/2" high x 5" deep
(not including handle)
• Weight 2 3/4 lbs.
MODEL 17L
Connections:
• 1/4" NPT pressure gauge port
• Inlet: 3/4" NPT
• Boom outlets: 3/4" NPT (3)
• Accessory outlets 3/4" NPT (2)
SSC AA17L
HAM 2041-01 • 1/2" NPT, 0-600 PSI
HAM 2042-01 • 1/2" NPT, 0-300 PSI
HAM 2053-01 • 3/4" NPT, 0-300 PSI
HAM 2054-01 • 3/4" NPT, 0-600 PSI
• 1 lb.
• 1 lb.
• 1 lb.
• 1 lb.
MODEL 17Y
Connections:
• 1/4" NPT pressure gauge port
• Inlet: 1" NPT
• Boom outlets: 3/4" NPT (3)
• Accessory outlets: 3/4" NPT (2)
High Pressure and
High flow Valves
jBS 1207620
50-800 psi, 40 GPM Capacity
3/4" Threads
Height: 9 1/2" • Weight: 8 lbs.
jBS 5284368
50-1000 psi, 75 GPM Capacity
1 1/4" Threads
Height: 9 1/2" • Weight: 7 lbs.
jBS 5284450
50-1200 psi, 75 GPM Capacity
1 1/4" Threads
Height: 12 1/8"
Weight: 10.5 lbs.
ALL PARTS AVAILABLE fOR jOHN BEAN VALVES
SSC AA17Y
92
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
Plastic Valves & Fittings
PVC molded-in place ball
valves. Low cost, quarter-turn
operation. Maintenance free,
corrosion-free. Used with
water plumbing for industrial,
agricultural and residential
(NSF Approved) purposes. Can also be used in the
chemical supply line for waste water treatment as well
as chemical plants.
PART #
NPT SIZE
FLO 6Q-MTWE050
1/2" FNPT
FLO 6Q-MTWE075
3/4" FNPT
FLO 6Q-MTWE100
1" FNPT
FLO 6Q-MTWE125
1 1/4" FNPT
FLO 6Q-MTWE150
1 1/2" FNPT
FLO 6Q-MTWE200
2" FNPT
KINGSTON
QuICk OPEN SELf CLOSE VALVES
Normally closed, quick open, self closing valve, heavy brass
construction. Stem design has pressure equalization across
stem seat to allow for high pressure operation. Disc seat and
O-ring seals with stainless steel springs. Maximum pressure
400 PSI. Handles available with squeeze, pull, or lift levers
(also available without lever and bracket.) Excellent for agricultural
or industrial sprayers. 1/2", 3/4", 1", and 1 1/4" sizes.
Quick Open to 150 PSI - squeeze lever Above 150 PSI - squeeze lever
KIN 305B-4-1 1/2" • .5 lb.
KIN 305A-4-1 1/2" • 2 lbs.
KIN 305B-5-1 3/4" • .75 lb.
KIN 305A-5-1 3/4" • 2.5 lbs.
KIN 305B-FF-5-KIT - Kit for 3/4" high pressure valve
KIN 305A-FF-5-KIT - Kit for 3/4" low pressure valve
Call for information on other sizes and handle styles
PLASTIC BALL VALVES
SERIES 226
Barb x Barb
MODEL
END CONN.
SMC FN-226-4B4B-E
SMC FN-226-6B6B-B
SMC FN-226-8B8B-B
1/4" BARB
3/8" BARB
1/2" BARB
Pipe x Barb
SMC FN-226-4B4M-E 1/4" M.N.P.T.
SMC FN-226-4M6B-E 1/4" M.N.P.T.
SMC FN-226-8B4M-B 1/4" M.N.P.T.
END CONN.
1/4" BARB
3/8" BARB
1/2" BARB
Apollo
Valves
High pressure,
600 PSI 1/4 turn
bronze valves,
stainless ball teflon
MAX
PRESSURE
125
125
125
1/4" BARB
3/8" BARB
1/2" BARB
3 way Valves
125
125
125
High pressure, 600 PSI 1/4 turn
bronze valves, stainless steel
and stem teflon seats.
BRASS BALL VALVES
1/8" – 3/4"
SMC 075-FG-BT
SMC 075-HG-BT
END CONN.
1/8" F.N.P.T.
1/4" F.N.P.T.
3/8" F.N.P.T.
1/4" F.N.P.T.
1/4" F.N.P.T.
1/4" F.N.P.T.
1/4" M.N.P.T.
3/4" F.N.P.T.
3/4" F.G.H.T.
END CONN.
1/8" F.N.P.T.
1/4" F.N.P.T.
3/8" F.N.P.T.
1/4" M.N.P.T.
1/4" HOSE BARB
11/16"-16 MALE THRD.
11/16"-16 MALE THRD.
2 way Bronze Ball Valves
APO 71-144-01 - 3/4" FNPT
APO 71-145-01 - 1" FNPT
APO 71-146-01 - 1 1/4" FNPT
APO 71-147-01 - 1 1/2" FNPT
Economical Medium Pressure
400 PSI, 1/4 turn bronze valve, stainless steel ball, teflon seats.
APO 32-101-01 - 1/4" FNPT
APO 32-105-01 - 1" FNPT
APO 32-102-01 - 3/8" FNPT
APO 32-106-01 - 1 1/4" FNPT
APO 32-103-01 - 1/2" FNPT
APO 32-107-01 - 1 1/2" FNPT
APO 32-104-01 - 3/4" FNPT
APO 32-108-01 - 2" FNPT
3/4" M.G.H.T.
3/4" M.G.H.T.
AA144P DIRECTOVALVE®
BRAGLIA VALVES
2-WAY ELECTRICALLY CONTROLLED SOLENOID VALVE
• 10 GPM (37.9 l/m) flow with only 5 PSI (0.35 bar) pressure drop
• 2.5 amp current draw
• Polypropylene body for chemical resistance
• Fabric reinforced Viton® diaphragms
• No stroke adjustment required
• Corrosion resistant. 430SS solenoid grade armature
*To order, specify AA144Pand armature stop
then “1", “2", or “3" to
• Encapsulated coil and magnetic circuit
Model #
SSC AA144P-*
Inlet Size
3/4"
Outlet Size
1/2"
ELECTRIC/MANUAL VAVLES
PART #
SMC 012-2F2M-BT
SMC 025-4F4F-BT
SMC 036-6F6F-BT
SMC 025-4F4M-BT
SMC 025-4F4B-BT
SMC 025-4FMN-BT
SMC 025-4MMN-BT
APO 70-603-01 - 1/2" FNPT
APO 70-604-01 - 3/4" FNPT
APO 70-605-01 - 1" FNPT
APO 70-606-01 - 1 1/4" FNPT
APO 70-607-01 - 1 1/2" FNPT
APO 70-608-01 - 2" FNPT
indicate number of units.
Example: AA144P-3
TEEjET 344BEC ELECTRIC 12V VALVE
High pressure, 12 volt, ball valves and pressure regulators.
Low cost, low maintenance and compact design makes
them perfect for new and old sprayer retrofits.
REA 180.1910.9 - 12V ball valve
REA 180.1910.10 - 12V pressure regulator
• 25 RPM, .6 second shut-off fully open to close
• Available in 2-way or 3-way versions
• Stainless stem with optional polypropylene or stainless steel ball
• Maximum pressure 300 PSI
• Flow rate 24-32 GPM depends on style of valve
• Wetted parts are nylon, Teflon®, polypropylene, stainless steel
and Vitron®
• Available in 3/4" or 1" connections
SSC 344BEC
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
93
WE ARE SPRAYER EXPERTS!
We are one stop shopping: Call OESCO, Inc. for all your sprayer parts, accessories & calibration needs.
Call to speak with one of our specialists today! We are always happy to help you!
QJ360C Nozzle Body Series
• Available with either 3, 4 or 5 spray positions for easy change of spray tips or quick boom flushing
• Positive shutoff between each position
• Automatic spray alignment using flat fan spray tips
• Maximum operating pressure of 300 PSI (20 bar)
for Wet Booms
for Dry Booms
Available in 20 mm,
25 mm, 1/2", 3/4" or 1"
pipe connections
Available in 20 mm, 25 mm,
1/2", 3/4" or 1" single or double
hose shanks
Single Nozzle Bodies for Dry Booms
Single Nozzle Bodies for Wet Booms
for 3/8", 1/2" and 3/4" hose
for 1/2", 3/4" and 1" pipe mount
QJ100 Series
Quick TeeJet
Nozzle Body
QJ200 Series
Diaphragm Check
Valve Quick TeeJet
Nozzle Body
QJ300 Series
Diaphragm Check
Valve Quick TeeJet
Nozzle Body
Type QJ22187-NYB
Diaphragm Check
Valve Quick TeeJet
Nozzle Body (side
mount)
Type QJ17560A-NYB
Diaphragm Check
Valve Quick TeeJet
Nozzle Body
Type QJ7421-NYB
Quick TeeJet
Nozzle Body
BOOM COMPONENTS
Quick TeeJet Caps and Adapters
Hose Shank
Nozzle Bodies
QuickJet Round Clamps
For Operating Pressures
up to 125 PSI (9 bar)
GPM
QuickJet Square Clamps
Brass, stainless steel,
Nylon and Celcon®/
stainless steel hose
shank nozzle bodies.
Features 11/16"-16
TeeJet threaded outlet.
Standard clamps for
dry booms available
for round or square
tubing
Brass
Standard TeeJet
threaded caps
available in brass,
SS or nylon
Nylon
Call for your complete
Teejet Catalog today!
94
(Per Nozzle)
=
GPA x MPH x W
5,940
=
(Per Nozzle)
GAL/1000FT2 x MPH x W
MPH x W
=
5,940 x GPM (per nozzle)
MPH x W
GPM
Single Hose
Connection
Double
Hose
Connection
Useful Formulas
GPA
GAL/1000FT2 =
136 x GPM (per nozzle)
MPH x W
GPM — Gallons per minute
GPA — Gallons per acre
GAL/1000FT2 — Gallons per 1000 square feet
MPH — Miles per hour
W — Nozzle spacing (in inches) for broadcast spraying
Spray width (in inches) for single nozzle, band
spraying or boomless spraying
Row spacing (in inches) divided by the number of
nozzles per row for directed spraying
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
OPTIVISOR
Min/max records for temperature with date/time
stamp. Atomic time & date set automatically.
Includes one remote sensor but can receive
up to three. Wireless outdoor temp. range:
-39.8° F to 157.8° F, Indoor temp. range:
32° F to 139.8° F. Transmission range:
up to 330'.
Optical glass,
binocular-magnifier. Lightweight,
durable with
adjustable headband. Supplied
with #10 lens
plate which magnifies 31/2X at a focal length
of 4". Optional OptiLoupe available to increase
to 2-1/2X the power.
DON DA10 - Optivisor • .75 lb.
DON LP1 - OptiLoupe
Transmitter requires 4 AAA batteries (not included)
Base unit requires 2 AAA batteries (not included)
LAC WS-9080U-IT
LAC TX29U-IT - additional sensor
• 4 oz.
WATER SENSITIVE PAPER
DONEGAN
OPTICAL
MAGNIfIERS
Folding pocket magnifier with multiple
lens in plastic case. This dual lens model
produces three magnifying strengths:
4X, 5X and 9X.
La CroSSe
WIRELESS RAIN CENTER
La CroSSe
WIRELESS TEMPERATuRE STATION
Magnifiers
These specialty coated papers are used for evaluating distributions, swath widths, droplet densities and penetration of
spray into the crop canopy.
Water sensitive paper is yellow and stains blue when
exposed to aqueous spray
droplets. For information on
water sensitive paper ask for
information sheet 20367.
DON P949
Self-emptying rain bucket - empties via internal
tilting cups. Measures total rainfall, and past 24
hours rainfall. Light-heavy rainfall indicator icons
and rain alarm. Transmits up to 330'.
Requires 4 AAA batteries (not included)
LAC WS-9004U-IT
La CroSSe
HANDHELD ANEMOMETER
MEASuRES WIND SPEED
Registers maximum and average
wind speed. Displays wind chill and
temperature in °F or °C. Will show
wind speed of .44 mph to 67 mph.
Back lit with battery saving auto off.
Neck band and battery included.
Water Sensitive Paper
CODDINGTON
MAGNIfIER
Part No.
Double lenses mounted in
chrome plated case.
23mm lens, 10X magnification.
Paper Size
SSC 20301-1N
SSC 20301-2N
SSC 20301-3N
3"X1"
3"X2"
20"X1"
Package
LAC EA-3010
50 cards
50 cards
25 strips
DON V309-23
SPRAYER CALIBRATION
CONTAINER
Avoid over and under
application of chemicals
2 Liter capacity
SSC CP24034A-PP
SSC CP20016-NY
INCIDE OuT SPRAY TANk CLEANER
Liquid spray tank cleaner formulated to emulsify pesticide
residues and bond them to the rinse solution for a more
thorough cleanout of residues from sprayer systems.
• Manufacturer approved
• Eliminates unwanted pesticide residues from sprayer system
• Reduces the risk of damage to non-target plants
• Won't clog nozzles or damage pumps like dry tank cleaners
• Low use rate
• Convenient to use packaging
PLI 434-32
• Quickly find worn spray nozzle tips - Industry guidelines
recommend tip replacement once flow rate exceeds that of
a new tip by 10%.
• Accurately measure true tip flow rate - Today's high tech
sprayers can only be properly calibrated and confirmed
with this knowledge.
• Fast and simple operation - Readings in 10 seconds or
less per trip.
• Easy to read digital GPM display
SPO 23890 - SC1 Sprayer calibrator - batteries included • .52 lbs.
- 1 quart container
INSTRUMENTS/CALIBRATORS
TEEjET® TIP CLEANING
BRuSH
Accurate flow rate
measurements in seconds!
TeeJet® and OESCO ... Leaders in Spray Application Supplies
Here Are Some Of The Nozzles We Recommend for These Spraying Applications:
For: Soil incorporation, pre-emergence, fertilizer
(broadcast) use a coarse spray from Turbo
Floodjet® and TurboTeeJet® induction nozzles.
For: Systemic herbicides, fungicides,
insecticides use the same nozzles plus
the TurboTeeJet®, AIXR and AIC nozzles
For: Contact herbicides, fungicides,
insecticides use Turbo Teejet® or
XR Teejet®
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
95
®
Other GunJet Spray Guns:
All below have a twist handle for on/off and adjustment of
pattern. Two hand operation, replaceable disc for
volume control. Note: Specify disc when ordering gun
SPRAY GUNS
Brass Model AA43 Series Guns
A single hand operated spray gun
SSC AA43H-8 - 22" long, high pressure
SSC AA43L-8 - 22" long, low pressure
SSC AA2 - 24" long - Brass 3/4" FHT Inlet -
SSC AA43HA-8 - 13" long, high pressure
SSC AA43LA-8 - 13" long, low pressure
SSC AA12 - 20" long - Brass 3/4" FHT Inlet -
• 1/2" NPT Inlet
• Trigger control on/off
• Trigger pattern adjustment hollow cone to
straight stream as you pull the trigger back
• Available low (200PSI) or high (700PSI) pressure operation
SSC 25660-4.0
Nozzle Tip #
CP 25670-1.5 NY
CP 25670-3.0 NY
CP 25670-4.0 NY
Tip Color
Gray
Black
Red
• 1 lb.
Optional Accessories for GunJet® Spray Guns
SSC 7029 - Adapter for GHT (1/2 MPT to FGT) Brass (43 Guns)
SSC 11740B - Swivel connector with FHT. Free swiveling, leak proof
Pressure measured at spray nozzle
SSC 7029
SSC 11740B
Brass Extensions
Handles
Valves
• 1.75 lbs.
SSC AA18-AL - 20" long - Aluminum 1/4" FPT Inlet -
GUNJET® LAWN SPRAY GUN
Model No.
SSC 25660-1.5
SSC 25660-3.0
• 3.5 lbs.
4688 Trigger Valve
with trigger lock. Max flow rate
2 GPM, max pressure 250 PSI
(10 bar). 1/4" NPT (F) inlet
connection, 11/16"-16 (M) outlet
connection. Brass material.
Straight and curved extensions 4673 and 6671 for pressure to 125 PSI (9 bar). 7715 - for pressure to 250 PSI (17 bar). Fits models 23L, 31
GunJet spray guns and trigger valves.
4727 Sure Grip Handle
Brass, rubber coated, 1/4" NPS (M)
or BSPT hose inlet connection.
SSC 4727
SSC 4688
Straight
w/ Fixed
Body
Curved
w/Fixed
Body
Ext.
Length
Net
Weight
in oz.
6466 Trigger Valve
7715-8
4673-8
6671-8
8"
3
Same as 4688, less trigger lock,
with extra long trigger.
7715-18
4673-18
6671-18
18"
4
7715-24
4673-24
6671-24
24"
5
7715-30
4673-30
6671-30
30"
5 1/2
4754 Sure Grip Handle
SSC 6466
Brass, rubber coated, 3/4" garden
hose thread (F) inlet connection.
SSC 4754
SPRAY GUNS
Curved
w/Swivel
Body
7715-36
4673-36
6671-36
36"
6 1/4
7715-48
4673-48
6671-48
48"
7 1/2
Brass Extension
Tip
Handle
Example of assembled brass spray wand
Cap CP1325
Valve
Manufactured by
OuR OWN fEEDING NEEDLE
This high pressure, high volume needle is manufactured
out of thick wall steel pipe tapered and threaded together. Complete with adjustable step plate
(doubles as splash plate). A high pressure 3/4" squeeze handle valve is mounted in the 3/4" pipe
handle. A 3/4" FHT brass adapter is included ready to attach to hose. The tip is an interchangeable: 2, 3, 4 or 6 hole. Please specify which tip when ordering. Length 40". All parts available.
ORC FN-12
ORC FN-13
ORC FN-14
ORC FN-16
(2 hole tip) • 10 lbs.
GPM at 200 PSI
13
(3 hole tip) • 10 lbs.
20
(4 hole tip) • 10 lbs.
27
(6 hole tip) • 10 lbs.
40
Replacement tips:
2 hole • .25 lb.
ORC FNT-2
ORC FNT-3
ORC FNT-4
ORC FNT-6
3 hole • .25 lb.
4 hole • .25 lb.
6 hole • .25 lb.
Replacement valve: KIN 305A5-1 - 3/4" squeeze valve
Valve repair kit: KIN 305AFF-5-KIT
96
Made in USA
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
Largest John Bean
parts inventory in the
Northeast!
ALL parts available for John Bean
Sprayers, Accessories and Guns.
jOHN BEAN 785 SPRAY GuN
Excellent all purpose spray gun. Aluminum construction,
adjustable pattern, trigger control (with latch),
interchangeable discs for volume control. Assortment
of discs supplied with gun and optional large volume
kit available. 24" long, 3/4" FGH inlet, 48 GPM,
800 PSI capacity.
JBS 5253228 • 5 lbs.
JBS 5254037 High volume kit (over 25 gpm)
This rugged
stainless steel and
brass pistol gun is
barrel adjustable from fine
cone spray to straight
stream. Interchangeable
tips and nozzles gives
various patterns and
volumes. The body is
tapped 1/4 FPT with a plug
for installation of a gauge
for calibration purposes.
Large trigger has locking
clip. Length 7", 3'4" FHT
inlet.
D
B
F
E
C
A
K
J
I
G
H
JD9-CT Standard Spray Gun
Supplied with Large tip (3.86 oz.) and manual adjustable pattern
control, trigger is on/off
GRE 38501 • 2 lbs.
jOHN BEAN
757 SPRAY GuN
JD9-PT Spray Gun
Trigger on PT model controls on/off and variable spray pattern.
Nice aluminum constructed true pistol
spray gun for one hand operation. Pattern
adjustment, locking trigger, interchangeable
discs for volume control. Assortment of discs
supplied with gun. 11" long, 3/4" FGH inlet, 13 GPM,
600 PSI capacity.
JBS 1235000 • 1.5 lbs.
®
GREEN GARDE®
SPRAY GuN
ADJUSTABLE PATTERN
SPRAY GUNS
HYPRO LONG DISTANCE GuN
GRE 38507
GRE 38507
• 2 lbs.
Accessories to Fit the JD9-CT gun
GRE 38633
GRE 38634
GRE 38635
GRE 38636
GRE 38637
GRE 38638
A
B
C
D
E
F
Flooding Plastic • 4 GPM
Flooding Plastic • 2 GPM
Flooding Plastic • 5 GPM
Flooding Baseball Head • 2 GPM
Flooding Plastic • 1 GPM
Flooding Plastic • 1/2 GPM
Flow Rate
G
H
I
J
K
0.3 to 1 GPM
1.0 to 3 GPM
2.0 to 5 GPM
3.0 to 8 GPM w/gun
10 to19 GPM
Extra Small
Small
Medium
Large
Extra Large
with 38917, 2-hole tip complete Gun sold separately.
GRE 38918 - 3-hole tip only
GRE 38901 - 4-hole tip only
GRE 38906 - 7" stainless steel
needle extension w/O-rings
GRE 38907 - 11" stainless steel
Spray gun tips:
No.
Size
GRE 38606
GRE 38605
GRE 38604
GRE 38602
GRE 38603
GRE 38919 - Heavy-duty feeder
needle extension w/O-rings
GRE 38908 - 36" extension
GRE 38903 - 18" extension
GRE 38905 - Floppy foot plate
GRE 38904 - Extension connector
w/O-rings
Tip Adapters, Wands
GRE 38512
GRE 38990
GRE 38545
GRE 38546
Tip adapter for use with Spraying Systems Co. wands
Tip adapter for use with Hudson spray wands or with Calibrator™ valve
Hudson straight 18" brass spray wand with Delavan Raindrop Low Drift RF8 nozzle
Hudson curved 18" brass spray wand with Delavan Raindrop Low Drift RF8 nozzle
Hamilton Senior Brass Spray Gun
HYPRO TuRBO GuN
7" barrel, up to 10gpm flow, up to 700psi, one hand
operation, 1/2" MPT inlet trigger valve, pattern
adjustment and a sliding cone over the tip to inject
air for turbo mist.
HYP 3381-0013 • 1.65 lbs.
RECOMMENDED
PuMP CAPACITY,
PRESSuRE AND
TIPS fOR SHADE
TREE SPRAYING
Heavy duty brass spray gun. 900 PSI maximum pressure. All orifice discs are
made from hardened steel. Inlet: 3/4" FGHT. Comes with #5 disc. 22" OAL.
SPRAY GUNS
21" barrel, 30gpm flow, up to 1200psi, two handle.
Spray gun 1/2" MPT inlet, Trigger valve.
HYP 3381-0011 • 6 lbs.
HAM 1000-01
PUMP GPM
PUMP PSI
HOSE
SIZE
GUN & DISC
NOZZLE
PSI
TREE
HEIGHT
60
50
35
600-800# with
100' of 3/4" hose
3/4"
785 equipped with special kit and
#22 disc
450 - 550
65' to 110'
600# with
100' of hose
3/4"
785 equipped with special kit and
#16 disc
450 - 550
50' to 70'
35
25
20
600-700#
with 200' of hose
3/4"
785 & #14
450 - 550
40' to 65'
400-500#
with 100' of hose
5/8"
785 & #14
250 - 350
35' to 50'
10
400#
with 100' of hose
1/2"
785 & #10
300 - 350
20' to 35'
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
97
Spray Hose
Call OESCO, Inc. for all of your hose needs. We stock these hoses along with lay-flat discharge and custom hydraulic hoses
LOW PRESSURE RUBBER SPRAY HOSE
MCG 1/4X2-67BH - 1/4" ID - 300 PSI rated
MCG 3/8X2-67BH - 3/8" ID - 300 PSI rated
MCG 1/2X2-67BH - 1/2" ID - 300 PSI rated
MCG 5/8X2-67BH - 5/8" ID - 200 PSI rated
MCG 3/4X2-67BH - 3/4" ID - 200 PSI rated
MCG 1X2-67BH - 1" ID - 200 PSI rated
MCG 1-1/4X2-67BH - 1 1/4" ID - 150 PSI rated
MCG 1-1/2X2-67BH - 1 1/2" ID - 250 PSI rated
GOODYEAR 600 PSI BRAID-REINFORCED
PVC SPRAY HOSE
MCG 006Pliovic1800 - 3/8" ID - 600 PSI PVC hose
MCG 008Pliovic1800 - 1/2" ID - 600 PSI PVC hose
MCG 012Pliovic1800 - 3/4" ID - 600 PSI PVC hose
Spray hose is
sized by ID
(inside diameter)
Hose can
be cut to
any length
SUCTION HOSE
HIGH PRESSURE RUBBER SPRAY HOSE
750 PSI rated
MCG 006-NR-SPRAY - 3/8" ID Spray Hose
MCG 008-NR-SPRAY - 1/2" ID Spray Hose
MCG 012-NR-SPRAY - 3/4" ID Spray Hose
MCG 016-NR-SPRAY - 1" ID Spray Hose
We supply vinyl and all weather suction hose for suction
use which can also be used for low pressure transfer
hose. Other suction hose available - call for details.
MCG 016-300-EPDM - 1" ID - all weather rubber
MCG 020-300-EPDM - 1 1/4" ID - all weather rubber
MCG 024-300-EPDM - 1 1/2" ID - all weather rubber
MCG 032-300-EPDM - 2" ID - all weather rubber
MCG 040-300-EPDM - 2 1/2" ID - all weather rubber
MCG 048-300-EPDM - 3" ID - all weather rubber
Fittings
and
Coupling
sets
installed
to order
NYLON BRAIDED HOSE
HOSE
Nylon braided hose, 250 lbs. maximum pressure sizes
available, food & beverage rated.
FLO 2H5015-0375 - 3/8" ID - 225 PSI
FLO 2H5015-050 - 1/2" ID - 200 PSI
FLO 2H5015-0625 - 5/8" ID - 200 PSI
FLO 2H5015-075 - 3/4" ID - 150 PSI
FLO 2H5015-100 - 1" ID - 125 PSI
FLO 2H5015-125 - 1 1/4" ID - 100 PSI
CLEAR SUCTION HOSE
REA HNP075 - 3/4" Armovin wire reinforced PVC
REA HNP100 - 1" Armovin wire reinforced PVC
REA HNP125 - 1 1/4" Armovin wire reinforced PVC
REA HNP150 - 1 1/2" Armovin wire reinforced PVC
REA HNP200 - 2" Armovin wire reinforced PVC
We stock
thousands
of feet of
hose!
CLEAR PVC TUBING, FDA COMPLIANT
MCG ABH02017 - 1/4" ID 1/16" wall thickness
MCG ABH02027 - 3/8" ID 1/16" wall thickness
MCG ABH02036 - 1/2" ID 1/16" wall thickness
MCG ABH02046 - 5/8" ID 1/8" wall thickness
MCG ABH02053 - 3/4" ID 1/8" wall thickness
MCG ABH00062 - 1" ID 1/8" wall thickness
MCG ABH00071 - 1-1/4" ID 1/4" wall thickness
REINFORCED CLEAR PVC TUBING,
FDA COMPLIANT
FLO 2XWT100-100 - 1" diameter
FLO 2XWT125-100 - 1 1/4" diameter
FLO 2XWT150-100 - 1 1/2" diameter
FLO 2XWT200-100 - 2" diameter
GILMORE fLEXOGEN GARDEN HOSE
8 ply construction assures durability in all weather. Double tire
cord reinforced for strength. Lightweight and flexible. 500 PSI
burst rated.
The last hose you'll ever buy!!!
Flexogen is the hose that has long set the standard for
quality in garden hoses. Recognized by consumers and
trade alike, it offers the ultimate in quality and value.
Sizes available:
GIL 10-12025 - 1/2" ID x 25' long - GHT couplings • 3 lbs./roll
GIL 10-12050 - 1/2" ID x 50' long - GHT couplings • 5 lbs./roll
GIL 10-58050 - 5/8" ID x 50' long - GHT couplings • 8 lbs./roll
GIL 10-58075 - 5/8" ID x 75' long - GHT couplings • 12 lbs./roll
GIL 10-58100 - 5/8" ID x 100' long - GHT couplings • 16 lbs./roll
GIL 10-34025 - 3/4" ID x 25' long - uncoupled • 5 lbs./roll
98
GIL 10-34250 - 3/4" ID x 250' long - uncoupled • 52 lbs./roll
GIL 10-34050 - 3/4" ID x 50' long - GHT couplings • 8 lbs./roll
GIL 10-34075 - 3/4" ID x 75' long - GHT couplings • 12 lbs./roll
GIL 10-34100 - 3/4" ID x 100' long - GHT couplings • 21 lbs./roll
GIL 10-10075 - 1" ID x 75' long - coupled 1" NPT • 32 lbs./roll
GIL 10-10100 - 1" ID x 100' long - coupled 1" NPT • 40 lbs./roll
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
BRAID-REINfORCED PROfESSIONAL PVC HOSE
OUR BEST SPRAY HOSE!
Order by the foot or by the roll.
PVC
High Pressure
Spray Hose
3 Year Warranty
So good we warrantee it for
3 years! Reinforced PVC
with high burst strength.
Melded inner core and
cover to form complex
reinforcement that will
not separate under high
pressure. Light, bright
colors are easy to see,
won't mark curbs or
sidewalks. Sizes to fit
any need. Costs you less
because it lasts longer.
Inner reinforced PVC Hose for high strength
Dark Gray Spiral
Neon PVC
Couplings installed on hose to order.
Please specify installation requirements when ordering.
See page100 for couplings.
High-Pressure, Braid-Reinforced, Neon, PVC Hose
800 PSI working pressure, 3000 PSI burst
GRE 38690 - 1/2" x 600'
GRE 38553 - 5/8" x 300'
GRE 38692 - 5/8" x 400'
GRE 38695 - 3/4" x 300'
GRE 38696 - 3/4" x 400'
Dark Gray Spiral Hose
300 PSI working pressure, 1200 PSI burst
GRE 38725 - 3/8" x 300'
GRE 38726 - 3/8" x 400'
GRE 38727 - 1/2" x 300'
GRE 38728 - 1/2" x 400'
GREEN GARDE SPRAY HOSE
GRE 38684 - 3/8" x 300'
GRE 38685 - 3/8" x 400'
GRE 38686 - 3/8" x 600'
GRE 38688 - 1/2" x 300'
GRE 38689 - 1/2" x 400'
HOSE CuTTER
Here's a fast and clean tool to cut hose.
No deburring necessary and it's lightweight with strong nylon handles.
Replacement blades available.
GRE 38930 - Hose Cutter • 8 oz.
GRE 38931 - Replacement Blade •
1 oz.
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
99
Plated Steel Coupling Sets and Hose Fittings for Spray Hose
Coupling sets are important factors in prolonging the life of your high pressure hose. We supply Green
Garde hose fittings on all high pressure hose we sell. These hose fittings are designed to assure
maximum flow with large ID and long shanks. The shank end is rounded to prevent early hose failure
and to aid in the installation of fittings on the hose.
All below threads are GHT
GREEN GARDE HIGH PRESSuRE HOSE fITTINGS
No.
Description
GRE 38941
GRE 38940
GRE 38944
GRE 38943
1/2" barb shank X MHT
1/2" barb shank
(w/nut and washer) X FHT
5/8" barb shank X MHT
5/8" barb
(w/nut & washer) X FHT
GRE 38947
3/4" barb X MHT
GRE 38946
3/4" barb
(w/nut & washer) X FHT
DIXON HIGH PRESSuRE
3/8"HOSE fITTINGS
HOSE COUPLINGS/FITTINGS
2 5/16"
1/2"
5/8"
2 5/16"
2 3/8"
5/8"
2 3/8"
3/4"
2 5/16"
38940
3/4"
1/8" x 1/8"
3/16" x 1/8"
3/16" x 1/4"
1/4" x 1/8"
1/4" x 1/4"
1/4" x 3/8"
5/16" x 1/8"
5/16" x 1/4"
5/16" x 3/8"
3/8" x 1/8"
3/8" x 1/4"
3/8" x 3/8"
3/8" x 1/2"
1/2" x 1/4"
1/2" x 3/8"
1/2" x 1/2"
1/2" x 3/4"
5/8" x 3/8"
5/8" x 1/2"
5/8" x 3/4"
3/4" x 1/2"
3/4" x 3/4"
1" x 3/4"
1" x 1"
MPT
MPT
MPT
MPT
MPT
MPT
MPT
MPT
MPT
MPT
MPT
MPT
MPT
MPT
MPT
MPT
MPT
MPT
MPT
MPT
MPT
MPT
MPT
MPT
Sh.Wt.
1 oz.
1 oz.
1 oz.
1 oz.
1 oz.
2 oz.
1 oz.
1 oz.
2 oz.
1 oz.
1 oz.
1 oz.
2 oz.
1 oz.
2 oz.
2 oz.
3 oz.
2 oz.
2 oz.
3 oz.
2 oz.
3 oz.
3 oz.
3 oz.
38943
38944
38946
38947
nut
Complete Green Garde coupling sets. Order by individual part.
2 5/16"
DVC SLS347 3/8" hose barb x 3/4" FHT
DVC SLS317 3/8" hose barb x 3/4" MHT
Hose shank X Male Pipe Thread
DVC BN11
DVC BN151
DVC BN152
DVC BN21
DVC BN22
DVC BN23
DVC BN251
DVC BN252
DVC BN253
DVC BN31
DVC BN32
DVC BN33
DVC BN34
DVC BN42
DVC BN43
DVC BN44
DVC BN46
DVC BN53
DVC BN54
DVC BN56
DVC BN64
DVC BN66
DVC BN86
DVC BN88
1/2"
washer
38941
BRASS HOSE
BARBS
BN
Shank Length
inches
Fits Hose ID inches
Fittings, Coupling Sets and Adapters
Note: All fittings are identified by listing the thread as
(m) male, (f) female, (pt) pipe thread. (GHT) Hose
thread means 3/4" garden hose thread, (m) male,
(f) female . Hose barbs (HB) or hose shanks are the size
of the ID of the hose the barb is fitting into.
HOSE SHANk
TYPE fITTING
PLATED STEEL
BRASS SHORT
SHANk fITTINGS
GHT THREAD X HOSE SHANk
Hose shank X Male Pipe Thread
DVC STC1
DVC STC5
DVC STC10
DVC STC15
DVC STC20
DVC STC25
DVC STC30
DVC STC35
1/2" x 1/2" MPT • 1/4 lb.
3/4" x 3/4" MPT • 1/4 lb.
1' x 1" MPT • 1/4 lb.
1 1/4" x 1 1/4" MPT • 1/2 lb.
1 1/2" x 1 1/2" MPT • 1/2 lb.
2" x 2" MPT • 1 lb.
2 1/2" x 2 1/2" MPT • 2 lbs.
3" x 3" MPT • 3 lbs.
STAINLESS STEEL
SHORT SHANk
COuPLINGS
Hose shank X Male Pipe Thread
DVC RST1
DVC RST5
DVC RST10
DVC RST15
DVC RST20
DVC RST25
Female with Swivel:
DVC BCF73 - FHT x 3/8" • 2 oz.
DVC BCF74 - FHT x 1/2" • 2 oz.
DVC BCF75 - FHT x 5/8" • 2 oz.
DVC BCF76 - FHT x 3/4" • 2 oz.
Male:
DVC BCM73 - MHT x 3/8" • 2 oz.
DVC BCM74 - MHT x 1/2" • 2 oz.
DVC BCM75 - MHT x 5/8" • 2 oz.
DVC BCM76 - MHT x 3/4" • 2 oz.
WINGNuT fITTINGS
1/2" x 1/2" MPT • 1/4 lb.
3/4" x 3/4" MPT • 1/4 lb.
1" x 1" MPT • 1/4 lb.
1 1/4" x 1 1/4" MPT • 1/2 lb.
1 1/2" x 1 1/2" MPT • 1/2 lb.
2" x 2" MPT • 1 lb.
"kING" STEEL NIPPLES
Washers for Suction, Long
and Short Shank Couplings
DVC KHN222 - 1/4" x 1/4" MPT
DVC KHN322 - 3/8" x 1/4" MPT
DVC KHN332 - 3/8" x 3/8" MPT
DVC KHN342 - 3/8" x 1/2" MPT
DVC KHN422 - 1/2" x 1/4" MPT
DVC KHN432 - 1/2" x 3/8" MPT
DVC KHN442 - 1/2" x 1/2" MPT
DVC KHN462 - 1/2" x 3/4" MPT
DVC KHN642 - 3/4" x 1/2" MPT
DVC KHN662 - 3/4" x 3/4" MPT
DVC KHN862 - 1" x 3/4" MPT
DVC KHN882 - 1" x 1" MPT
100
•
•
•
•
•
•
•
•
•
•
•
•
1 oz.
1 oz.
2 oz.
4 oz.
1 oz.
4 oz.
4 oz.
6 oz.
2 oz.
6 oz.
6 oz.
10 oz.
Rubber Washer:
DVC KRW5 - 3/4"
DVC KRW10 - 1"
DVC KRW15 - 1 1/4"
DVC KRW20 - 1 1/2"
DVC KRW25 - 2"
DVC KRW30 - 2 1/2"
DVC KRW35 - 3"
Leather Washer:
DVC KLW5 - 3/4"
DVC KLW10 - 1"
• Shipping wt.
1 oz. each
Special Note:
Use DVC KLW5
washers for
standard 3/4" coupling sets.
Elbow fitting REA EL050F037HB
90° 3/8" Barb X 1/2" FPT Wingnut
REA EL050F050HB
90° 1/2" Barb X 1/2" FPT Wingnut
Straight fitting HYP 9910-110130
1/2" Barb X 1/2" FPT Wingnut
HYP 9910-110131
3/8" Barb X 1/2" FPT Wingnut
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
Part #
Description
POLYPROPYLENE PIPE FITTINGS
Poly Nipples
POLYPROPYLENE
BALL VALVES
4 bolt construction (6 bolt for
large valves) with viton O rings
and teflon seats. 100 PSI max
pressure.
4 Bolt Valves
Part #
Description
Max
PSI
Pipe
Size
Thru
Ball
BJO V050
BJO V075
BJO V100
BJO V100FP
BJO V125
BJO V125FP
BJO V150
BJO V200
Full Port
Full Port
Standard Port
Full Port
Standard Port
Full Port
Full Port
Standard Port
150
150
150
150
150
150
150
150
1/2"
3/4"
1"
1"
1 1/4"
1 1/4"
1 1/2"
2"
3/4"
3/4"
3/4"
1"
1"
1 1/2"
1 1/2"
1 1/2"
6 Bolt Valves
Part #
Description
BJO V200FP
BJO V300
BJO V300FP
Max
PSI
Full Port
150
Standard Port 100
Full Port
100
Pipe
Size
2"
3"
3"
Thru
Ball
2 1/16"
2 1/2"
3"
SINGLE UNION POLYPROPYLENE
BALL VALVES
• Precision molded out of glass reinforced
polypropylene for strength and chemical
resistance
• Maximum operating pressure
100 psi at 70° F.
Part #
3/4" Single Union Poly Valve
1" Single Union Poly Valve
1 1/4" Single Union Poly Valve
1 1/2" Single Union Poly Valve
1 1/4" MPT x 3/4" FPT Red. Bush.
1 1/4" MPT x 1" FPT Red. Bush.
1 1/2" MPT x 3/4" FPT Red. Bush.
2" MPT x 3/4" FPT Red. Bush.
2" MPT x 1" FPT Red. Bush.
2" MPT x 1 1/2" FPT Red. Bush.
Poly Pipe Tee
BJO TEE050
BJO TEE075
BJO TEE100
BJO TEE125
BJO TEE150
BJO TEE200
1/2" Poly Pipe Tee
3/4" Poly Pipe Tee
1" Poly Pipe Tee
1 1/4" Poly Pipe Tee
1 1/2" Poly Pipe Tee
2" Poly Pipe Tee
Poly Elbows 90°
BJO EL075-90
BJO EL100-90
BJO EL125-90
BJO EL150-90
BJO EL200-90
3/4" Poly Pipe Elbow 90°
1" Poly Pipe Elbow 90°
1 1/4" Poly Pipe Elbow 90°
1 1/2" Poly Pipe Elbow 90°
2" Poly Pipe Elbow 90°
BANJO VALVES/FITTINGS
BANJO STUBBY VALVES
POLYPROPYLENE HOSE BARBS
Poly Straight Hose Barbs
BJO HB050-075
1/2" Male Thread x 3/4" HB
BJO HB075
3/4" Male Thread x 3/4" HB
BJO HB100
1" Male Thread x 1" HB
BJO HB100-075
1" Male Thread x 3/4" HB
BJO HB100-125
1" Male Thread x 1 1/4" HB
BJO HB125
1 1/4" Male Thread x 1 1/4" HB
BJO HB150
1 1/2" Male Thread x 1 1/2" HB
BJO HB150-125
1 1/2" Male Thread x 1 1/4" HB
BJO HB150-200
1 1/2" Male Thread x 2" HB
BJO HB200
2" Male Thread x 2" HB
BJO HB200-155
2" Male Thread x 1 1/2" HB
• Stainless steel bolts
• Glass filled polypropylene
• Multiple design options
• Unique patented compact design
• Lightweight
• Maximum operating pressure 100 psi
@ 70° F. 75 psi @ 150° F.
• All PTFE Seals
Part #
Description
BJO VSF200
2" Male Adaptor X 2" Female NPT
BJO VSFMT200 2" Male Adaptor X 2" Male NPT
BJO VSFHB200 2" Male Adaptor X 2" Male Hose Barb
Poly 90° Hose Barbs
BJO HB050/075-90
BJO HB075-90
BJO HB100-90
BJO HB100/125-90
BJO HB125-90
BJO HB125/100-90
BJO HB125/150-90
BJO HB150-90
BJO HB200/150-90
BJO HB200-90
Many other Banjo valves available - Call for details
®
Bulkhead Fittings
(For all tanks –
poly, wood, steel)
Size
1/2" NPT
3/4" NPT
1" NPT
1 1/4" NPT
1 1/2" NPT
2" NPT
3" NPT
4" NPT
Reducing Bushing
BJO RB125-075
BJO RB125-100
BJO RB150-075
BJO RB200-075
BJO RB200-100
BJO RB200-150
Poly Street Elbows 45°
BJO SL125-45
1 1/4" Poly Pipe Street Elbow 45°
BJO SL150-45
1 1/2" Poly Pipe Street Elbow 45°
BJO SL200-45
2" Poly Pipe Street Elbow 45°
2" Standard Port, Ball Valves with 1.5" Ball Opening
Part#
HYP WBH12
HYP WBH34
HYP WBH100
HYP WBH114
HYP WBH112
HYP WBH200
HYP WBH300
HYP WBH400
1/2" x Short Poly Nipple
3/4" x Short Poly Nipple
3/4" x 4" Poly Nipple
3/4" x 6" Poly Nipple
1" x Short Poly Nipple
1" x 4" Poly Nipple
1" x 6" Poly Nipple
1 1/4" x Short Poly Nipple
1 1/4" x 4" Poly Nipple
1 1/4" x 6" Poly Nipple
1 1/2" x Short Poly Nipple
2" x Short Poly Nipple
2" x 6" Poly Nipple
Poly Street Elbows 90°
BJO SL075-90
3/4" Pipe Street Elbow 90°
BJO SL100-90
1" Pipe Street Elbow 90°
BJO SL125-90
1 1/4" Pipe Street Elbow 90°
BJO SL150-90
1 1/2" Pipe Street Elbow 90°
BJO SL200-90
2" Pipe Street Elbow 90°
Description
BJO UV075FP
BJO UV100FP
BJO UV125FP
BJO UV150FP
BJO NIP050-SH
BJO NIP075-SH
BJO NIP075-4
BJO NIP075-6
BJO NIP100-SH
BJO NIP100-4
BJO NIP100-6
BJO NIP125-SH
BJO NIP125-4
BJO NIP125-6
BJO NIP150-SH
BJO NIP200-SH
BJO NIP200-6
1/2" Male Thread x 3/4" HB 90°
3/4" Male Thread x 3/4" HB 90°
1" Male Thread x 1" HB 90°
1" Male Thread x 1 1/4" HB 90°
1 1/4" Male Thread x 1/4" HB 90°
1 1/4" Male Thread x 1" HB 90°
1 1/4" Male Thread x 1 1/2" HB 90°
1 1/2" Male Thread x 1 1/2" HB 90°
2" Male Thread x 1 1/2" HB 90°
2" Male Thread x 2" HB 90°
POLY BOLTED “BOTTOM DRAIN" TANK FLANGES
BJO BF100BD
BJO BF125BD
BJO BF150BD
1" x 1" Threaded Flange EPDM
1 1/4" x 1" Threaded Flange EPDM
1 1/2" x 2" Threaded Std. Port Flange EPDM
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
101
Fittings
®
Stainless Steel Fittings
All 304 Stainless Steel
Nylon Hose Fittings
DVC TSST222 - 1/4" x 1/4" x 1/4" MPT
DVC TSST333 - 3/8" x 3/8" x 3/8" MPT
DVC TSST444 - 1/2" x 1/2" x 1/2" MPT
DVC TSST666 - 3/4" x 3/4" x 3/4" MPT
MALE PIPE THREAD BY HOSE
BARB - MPT X HB
HYP 9A14 - 1/4" x 1/4"
HYP 9A12 - 1/2" x 1/2"
HYP 9A34 - 3/4" x 3/4"
HYP 9A100 - 1" x 1"
STREET ELBOW: fEMALE
PIPE THREAD BY MALE
PIPE THREAD - MPT X fPT
HYP 7SE14 - 1/4" x 1/4"
HYP 7SE12 - 1/2" x 1/2"
HYP 7SE34 - 3/4" x 3/4"
HYP 7SE100 - 1" x 1"
COuPLING: fEMALE PIPE
THREAD - fPT X fPT
HYP 7FC14 - 1/4" x 1/4"
HYP 7FC12 - 1/2" x 1/2"
HYP 7FC34 - 3/4" x 3/4"
HYP 7FC100 - 1" x 1"
TEE: fEMALE PIPE THREAD
HYP 7TT14 - 1/4" x 1/4" x 1/4"
HYP 7TT12 - 1/2" x 1/2" x 1/2"
HYP 7TT34 - 3/4" x 3/4" x 3/4"
HYP 7TT100 - 1" x 1" x 1"
NYLON TEES
1/4" Hose Size
DVC TN21 - 1/8"MPT •
DVC TN22 - 1/4"MPT •
DVC TN23 - 3/8"MPT •
DVC TN24 - 1/2" MPT •
DVC TN26 - 3/4" MPT •
DVC TN28 - 1" MPT •
1 oz.
1 oz.
1 oz.
1 oz.
1 oz.
1 oz.
5/16" Hose Size
DVC TN252 - 1/4" MPT • 1 oz.
3/8" Hose Size
DVC TN31 - 1/8" MPT
DVC TN32 - 1/4" MPT
DVC TN33 - 3/8" MPT
DVC TN34 - 1/2" MPT
DVC TN36 - 3/4" MPT
•
•
•
•
•
1 oz.
1 oz.
1 oz.
1 oz.
1 oz.
1/2" Hose Size
DVC TN41 - 1/8" MPT •
DVC TN42 - 1/4" MPT •
DVC TN43 - 3/8" MPT •
DVC TN44 - 1/2" MPT •
DVC TN46 - 3/4" MPT •
1 oz.
1 oz.
1 oz.
1 oz.
1 oz.
5/8" Hose Size
ELBOW: fEMALE PIPE
THREAD 90° - fPT X fPT
HYP 7LL14 - 1/4" x 1/4"
HYP 7LL12 - 1/2" x 1/2"
HYP 7LL34 - 3/4" x 3/4"
HYP 7LL100 - 1" x 1"
REDuCER BuSHING MPT X fPT
SS/NYLON FITTINGS
HYP 7RB3814 - 3/8" x 1/4"
HYP 7RB1214 - 1/2" x 1/4"
HYP 7RB1238 - 1/2" x 3/8"
HYP 7RB3412 - 3/4" x 1/2"
HYP 7RB10034 - 1" x 3/4"
NIPPLE MPT X LENGTH
HYP 714112 - 1/4" x 1 1/2"
HYP 714300 - 1/4" x 3"
HYP 712118 - 1/2" x 1 1/8"
HYP 712112 - 1/2" x 1 1/2"
HYP 712200 - 1/2" x 2"
HYP 734138 - 3/4" x 1 3/8"
HYP 734400 - 3/4" x 4"
HYP 7100112 - 1" x 1 1/2"
HYP 7100400 - 1" x 4"
DVC TN53 - 3/8" MPT • 2 oz.
DVC TN54 - 1/2" MPT • 2 oz.
DVC TN56 - 3/4" MPT • 2 oz.
3/4" Hose Size
3/8" Hose Size
DVC TCF73 - 3/4" GHT • 1 oz.
1/2" Hose Size
DVC TCF74 - 3/4" GHT • 1 oz.
3/4" Hose Size
DVC TCF76 - 3/4" GHT • 1 oz.
102
DVC TSSS222 - 1/4" x 1/4" x 1/4"
DVC TSSS333 - 3/8" x 3/8" x 3/8"
DVC TSSS444 - 1/2" x 1/2" x 1/2"
DVC TSSS666 - 3/4" x 3/4" x 3/4"
Tuff LITE 90° NYLON ELL
DVC TLSS22 – 1/4" Hose size
DVC TLSS33 – 3/8" Hose size
DVC TLSS44 – 1/2" Hose size
DVC TLSS66 – 3/4" Hose size
Tuff LITE 90° NYLON
THREADED ELL
DVC TLS21 – 1/8" MPT, 1/4" Hose
DVC TLS22 – 1/4" MPT, 1/4" Hose
DVC TLS23 – 3/8" MPT, 1/4" Hose
DVC TLS31 – 1/8" MPT, 3/8" Hose
DVC TLS32 – 1/4" MPT, 3/8" Hose
DVC TLS33 – 3/8" MPT, 3/8" Hose
DVC TLS34 – 1/2" MPT, 3/8" Hose
DVC TLS36 – 3/4" MPT, 3/8" Hose
DVC TLS42 – 1/4" MPT, 1/2" Hose
DVC TLS43 – 3/8" MPT, 1/2" Hose
DVC TLS44 – 1/2" MPT, 1/2" Hose
DVC TLS46 – 3/4" MPT, 1/2" Hose
DVC TLS48 – 1"MPT, 1/2" Hose
2 oz.
2 oz.
2 oz.
2 oz.
DVC TLS53 – 3/8" MPT, 5/8" Hose
DVC TLS54 – 1/2" MPT, 5/8" Hose
DVC TLS56 – 3/4" MPT, 5/8" Hose
DVC TLS58 – 1" MPT, 5/8" Hose
DVC TN86 - 3/4" MPT • 3 oz.
DVC TN88 - 1" MPT • 3 oz.
DVC TLS63 – 3/8" MPT, 3/4" Hose
DVC TLS64 – 1/2" MPT, 3/4" Hose
DVC TLS66 – 3/4" MPT, 3/4" Hose
DVC TLS68 – 1" MPT, 3/4" Hose
DVC TN63 - 3/8" MPT •
DVC TN64 - 1/2" MPT •
DVC TN66 - 3/4" MPT •
DVC TN68 - 1" MPT •
1" Hose Size
1 1/4" Hose Size
We stock
thousands
of
fittings.
Call us
with your
needs.
DVC TN158 - 1" MPT • 3 oz.
DVC TN150 - 1 1/4" MPT • 3 oz.
DVC TN1520 - 1 1/2" MPT • 3 oz.
DVC TLS86 – 3/4" Male NPT, 1" Hose
DVC TLS88 – 1" Male NPT, 1" Hose
1 1/2" Hose Size
Tuff-LITE MENDER - (HIGH TENSILE NYLON)
DVC TN2015 - 1 1/4" MPT • 3 oz.
DVC TN200 - 1 1/2" MPT • 3 oz.
2" Hose Size
DVC TN250 - 2" MPT • 4 oz.
Order
Online
Tuff-LITE NYLON INSERTS & SHORT SHANk COuPLINGS
Female
NYLON TEES
DVC TM2 - 1/4" • 1 oz.
DVC TM25 - 5/16" • 1 oz.
DVC TM3 - 3/8" • 1 oz.
DVC TM4 - 1/2" • 1 oz.
DVC TM5 - 5/8" • 2 oz.
DVC TM6 - 3/4" • 2 oz.
DVC TM8 - 1" • 2 oz.
DIXON BRASS HOSE MENDER
DVC BM15 - 3/16"
DVC BM2 - 1/4"
DVC BM25 - 5/16"
DVC BM3 - 3/8"
DVC BM4 - 1/2"
DVC BM6 - 3/4"
•
•
•
•
•
•
1 oz.
1 oz.
1 oz.
1 oz.
1 oz.
1 oz.
“BOSS" HOSE MENDER
Male
3/8" Hose Size
DVC TCM73 - 3/4" GHT • 1 oz.
1/2" Hose Size
DVC TCM74 - 3/4" GHT • 1 oz.
3/4" Hose Size
DVC TCM76 - 3/4" GHT • 1 oz.
Collars to engage grip fingers of “Boss" clamps.
Plated materials malleable iron or plated tubular
steel depending on size.
DVC KM42 - 1/2" • .25 lb.
DVC KM52 - 5/8" • .25 lb.
DVC KM62 - 3/4" • .50 lb.
DVC KM82 - 1" • .75 lb.
Other sizes available by special order
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
fORGED 90° ELBOW:
fORGED TEE:
PART #
FAI 99-B
PART #
FAI 101-A
FAI 101-B
FAI 101-C
PIPE
1/4
CLOSE NIPPLE:
PART #
FAI 112-A
FAI 112-B
FAI 112-C
FAI 112-D
FAI 112-E
FAI 112-H
PIPE
1/8
1/4
3/8
1/2
3/4
1
fORGED 90°
STREET ELBOW:
PART #
FAI 116-A
FAI 116-B
FAI 116-C
HEX NIPPLE:
PART #
FAI 122-A
FAI 122-B
FAI 122-C
FAI 122-D
PIPE
1/8
1/4
3/8
1/2
TEE (CAST BRONzE):
PART #
FAI 101CA-D
FAI 101CA-E
PIPE
1/2
3/4
90° STREET ELBOW
(CAST BRONzE):
PART #
FAI 116CA-D
FAI 116CA-E
REDuCING HEX NIPPLE:
PART #
FAI 122-BA
FAI 122-CA
FAI 122-CB
FAI 122-DB
FAI 122-DC
PIPE
1/8
1/4
3/8
PIPE
1/8
1/4
3/8
PIPE PIPE
1/4 to 1/8
3/8 to 1/8
3/8 to 1/4
1/2 to 1/4
1/2 to 3/8
LONG NIPPLE:
PIPE
1/2
3/4
fORGED 90° ELBOW:
BRASS ADAPTER MALE GHT X
fEMALE NPT:
PART #
FAI 100-A
FAI 100-B
FAI 100-C
DVC BA794 - MHT x 1/2" FPT
DVC BA796 - MHT x 3/4" MPT
DVC FM1076 - MHT x 1" FPT
Weight: 2 oz. each
PIPE
1/8
1/4
3/8
BRASS ADAPTER fEMALE
GHT X MALE NPT:
PART #
1/4 NPT
FAI 113-B1-1/2
FAI 113-B2
FAI 113-B3
PIPE
1/4
1/4
1/4
LENGTH
1 1/2"
2"
3"
3/8 NPT
FAI 113-C1-1/2
FAI 113-C2
FAI 113-C3
3/8
3/8
3/8
1 1/2"
2"
3"
EXTRuDED 45° STREET ELBOW:
BRASS ADAPTER MALE
GHT X MALE NPT:
1/2 NPT
FAI 113-D1-1/2
FAI 113-D2
FAI 113-D3
1/2
1/2
1/2
1 1/2"
2"
3"
PART #
FAI X124-A
FAI X124-B
FAI X124-C
DVC BA73 - MHT x 3/8" MPT
DVC BA74 - MHT x 1/2" MPT
DVC BA776 - MHT x 3/4" MPT
Weight: 2 oz. each
90° ELBOW
(CAST BRONzE):
PART #
FAI 100CA-D
FAI 100CA-E
PIPE
1/2
3/4
PIPE
1/8
1/4
3/8
BRASS GHT X GHT ADAPTERS:
PART #
FAI 119-BA
FAI 119-CA
FAI 119-CB
FAI 119-DA
FAI 119-DB
FAI 119-DC
PIPE PIPE
1/4 to 1/8
3/8 to 1/8
3/8 to 1/4
1/2 to 1/8
1/2 to 1/4
1/2 to 3/8
BuSHING:
MALE FEMALE
PIPE
PIPE
1/4 to 1/8
3/8 to 1/8
3/8 to 1/4
1/2 to 1/8
1/2 to 1/4
1/2 to 3/8
3/4 to 1/4
3/4 to 1/2
1 to 3/4
45° STREET ELBOW
(CAST BRONzE):
PART #
FAI 124-D
FAI 124-E
PIPE
1/2
3/4
BRASS ADAPTER fEMALE
GHT X fEMALE NPT:
EXTRuDED 45° ELBOW:
PART #
FAI X105-A
PIPE
1/4
PIPE
1/8
1/4
3/8
1/2
3/4
EXTRuDED CROSS:
PART #
FAI X102-B
PIPE
1/4
fORGED MALE
BRANCH TEE:
PART #
FAI X106-B
PIPE
1/8
1/4
3/8
1/2
3/4
PIPE
1/4
fORGED STREET TEE:
PART #
FAI 107-B
Female: All Brass
Including Swivel Nut
DVC BS848 - 1" • .50 lb.
DVC FBB150 - 1 1/2" • .75 lb.
DVC FBB200 - 2" • 1 lb.
DVC FBB250 - 2 1/2" • 2 lbs.
DVC FBB300 - 3" • 3 lbs.
DVC FBB400 - 4" • 4 lbs.
CAP:
PART #
FAI 108-A
FAI 108-B
FAI 108-C
FAI 108-D
FAI 108-E
DVC BA974 - FHT x 1/2" FPT
DVC BA976 - FHT x 3/4" FPT
Weight: 2 oz. each
“kING" SHORT SHANk SuCTION
COuPLINGS (NPSM THREAD)
SQuARE PLuG:
PART #
FAI 109-A
FAI 109-B
FAI 109-C
FAI 109-D
FAI 109-E
Male:
DVC BA777 - MHT x MHT
Female:
DVC BA977- FHT x FHT
not pictured
Weight: 2 oz. each
BRASS FITTINGS/ADAPTERS
REDuCING COuPLING:
PART #
FAI 110-BA
FAI 110-CA
FAI 110-CB
FAI 110-DA
FAI 110-DB
FAI 110-DC
FAI 110-EB
FAI 110-ED
FAI 110-HE
DVC BMA974 - FHT x 1/2" MPT
DVC BMA976 - FHT x 3/4" MPT
DVC IM7610T - FHT x 1" MPT
Weight: 2 oz. each
PIPE
1/4
Male - All Brass
DVC BS818 - 1" • .50 lb.
DVC MB125 - 1 1/4" • .50 lb.
DVC MB150 - 1 1/2" • .75 lb.
DVC MB200 - 2" • 1 lb.
DVC MB250 - 2 1/2" • 2 lbs.
DVC MB300 - 3" • 3 lbs.
DVC MB400 - 4" • 4 lbs.
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
103
GHT Quick
Couplers
NY GLASS COMPONENTS PICTuRED
DVC DGH7P
Male Plug X Male GHT
DVC DGH7C
Female Coupler
X Female GHT
We believe this is the best and
least expensive product in its
field. The many advantages
include cost saving, lightweight,
easy working cams and fast
connecting.
NY-GLASS
Fairview Brass
• Yellow Corrosion Resistant
• Will not go “out of round" when dropped.
• Will not easily cross thread as other
plastic couplings do.
• Weight is 1/6 that of brass and 1/2
that of aluminum.
GHT “Y" Coupler
Use N suffix for NY-Glass.
FAI 202W
GHT 4-Valve
• White Food Grade couplings
• Lightweight
• Easy to install
• Many styles available
Manifold Nozzle
DVC 500-GH4V
Use F suffix for Food-Flo.
Size
NY-Glass
Food-Flo
Type A
Male Adapter X Female N.P.T.
1/4"
3/8"
1/2"
3/4"
1"
1 1/4"
1 1/2"
2"
FLO-025-A-N
FLO-037-A-N
FLO-050-A-N
FLO-075-A-N
FLO-100-A-N
FLO-125-A-N
FLO-150-A-N
FLO-200-A-N
Type B
1/2"
3/4"
1"
1 1/4"
1 1/2"
2"
Type C
1/2"
5/8"
3/4"
1"
1 1/4"
1 1/2"
2"
FLO-075-A-F
FLO-100-A-F
FLO-150-A-F
FLO-200-A-F
Female Coupler X Male N.P.T.
FLO-050-B-N
FLO-075-B-N
FLO-100-B-N
FLO-125-B-N
FLO-150-B-N
FLO-200-B-N
FLO-075-B-F
FLO-100-B-F
FLO-150-B-F
FLO-200-B-F
Female Coupler X Hose Shank
FLO-050-C-N
FLO-062-C-N
FLO-075-C-N
FLO-100-C-N
FLO-125-C-N
FLO-150-C-N
FLO-200-C-N
FLO-075-C-F
FLO-100-C-F
FLO-150-C-F
FLO-200-C-F
QUICK COUPLINGS
BRASS STRAIGHT THROuGH
QuICk-CONNECT fITTINGS
MALE NPT COuPLERS
INSuLATED WATER NOzzLE
Heavy duty brass valve and adjusting nut.
Hold open clip locks any spray pattern.
Chrome plated all zinc body. Industrial
strength nylon handle. Rubber head guard
on threaded GHT front version. Hot water
up to 180°F.
DVC SN75
CAMLOCKS/COUPLERS
CAMPBELL BRASS fOOT VALVES
Abrasion resistant.
Certified red brass
castings, stainless
steel springs, noncorrosive nylon stem
guide and stainless
steel screen. For pump
suction hoses.
GRA 5YM42 - 3/4" Female pipe thread
GRA 5YM43 - 1" Female pipe thread
GRA 5YM44 - 1 1/4" Female pipe thread
GRA 5YM45 - 1 1/2" Female pipe thread
GRA 5YM46 - 2" Female pipe thread
fEMALE NPT COuPLERS
DVC STFC2 - 1/4", 4500 PSI
DVC STFC3 - 3/8", 2700 PSI
DVC STFC4 - 1/2", 2500 PSI
DVC STFC6 - 3/4", 2000 PSI
Type E
1/2"
5/8"
3/4"
1"
1 1/4"
1 1/2"
2"
Female Coupler X Female N.P.T.
FLO-025-D-N
FLO-037-D-N
FLO-050-D-N
FLO-075-D-N
FLO-100-D-N
FLO-125-D-N
FLO-150-D-N
FLO-200-D-N
FLO-075-D-F
FLO-100-D-F
FLO-150-D-F
FLO-200-D-F
Male Adapter X Hose Shank
FLO-050-E-N
FLO-062-E-N
FLO-075-E-N
FLO-100-E-N
FLO-125-E-N
FLO-150-E-N
FLO-200-E-N
FLO-075-E-F
FLO-100-E-F
FLO-150-E-F
FLO-200-E-F
Type F Male Adapter X Male N.P.T.
1/2"
3/4"
1"
1 1/4"
1 1/2"
2"
FLO-050-F-N
FLO-075-F-N
FLO-100-F-N
FLO-125-F-N
FLO-150-F-N
FLO-200-F-N
FLO-075-F-F
FLO-100-F-F
FLO-150-F-F
FLO-200-F-F
MALE NPT ADAPTERS
Type DP Dust Plug
DVC STMP2B - 1/4", 4500 PSI
DVC STMP3B - 3/8", 2700 PSI
DVC STMP4B - 1/2", 2200 PSI
DVC STMP6B - 3/4", 1700 PSI
3/4"
1"
1 1/2"
2"
FLO-075-DP-N
FLO-100-DP-N
FLO-150-DP-N
FLO-200-DP-N
FLO-075-DP-F
FLO-100-DP-F
FLO-150-DP-F
FLO-200-DP-F
fEMALE NPT ADAPTERS
SuCTION
HOSE
STRAINERS
Type DC Dust Cap
Nickel plated, standard threaded type.
DVC RHS20 - 1 1/2" FPT • 1 1/2 lbs.
DVC RHS25 - 2" FPT • 2 lbs.
DVC RHS30 - 2 1/2" FPT • 2 1/2 lbs.
Other strainer styles and sizes
available by special order
104
DVC STMC2 - 1/4", 4500 PSI
DVC STMC3 - 3/8", 2700 PSI
DVC STMC4 - 1/2", 2500 PSI
DVC STMC6 - 3/4", 2000 PSI
TYPE D
1/4"
3/8"
1/2"
3/4"
1"
1 1/4"
1 1/2"
2"
3/4"
1"
1 1/2"
2"
DVC STFP2B - 1/4", 4500 PSI
DVC STFP3B - 3/8", 2700 PSI
DVC STFP4B - 1/2", 2200 PSI
DVC STFP6B - 3/4", 1700 PSI
FLO-075-DC-N
FLO-100-DC-N
FLO-150-DC-N
FLO-200-DC-N
FLO-075-DC-F
FLO-100-DC-F
FLO-150-DC-F
FLO-200-DC-F
Other larger sizes are
available by special order.
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
SILICONE-fILLED
PRESSuRE GAuGE
BAND-IT jR. C002 TOOL
For application of Band-It Jr. Smooth I.D.
Preformed Clamps
BDT C002 • 5.7 lbs.
BAND-IT C001 TOOL
This standard tool can be bench or vise
mounted and is used with the band bulk rolls
or with the J001 adapter for the preformed
clamps. This tool attaches the preformed
clamps to the hose and coupling to make the
most secure fitting possible to avoid all leaks
and failures in the hose.
BAND-IT SMOOTH I.D. CLAMPS
Band-it preformed stainless steel clamps.
BDT JS240 - 3/4" ID x 1/2" thick • 1 oz.
BDT JS242 - 1" ID x 1/4" thick • 1 oz.
BDT JS243 - 1" ID x 3/8" wide • 2 oz.
BDT JS202 - 1 3/8" ID x 3/8" wide • 2 oz.
BDT JS204 - 1 1/4" ID x 1/2" thick • 2 oz.
BDT JS209 - 2 1/2" ID x 5/8" thick • 2 oz.
BDT JS205 - 1 1/2" ID x 5/8" thick • 2 oz.
BDT JS214 - 4 1/2" ID x 3/4" wide • 2 oz.
BDT JS219 - 8" ID x 3/4" wide • 2 oz.
BDT JS412 - 3 1/2" ID x 3/4" thick • 1/2 lb.
WORM GEAR CLAMPS
STYLE HSS CLAMPS
All stainless construction combination 5/16"
hexagon and screwdriver slotted screw.
BDT C001 • 5 lbs.
BAND-IT jR. ADAPTER j001
The adapter is necessary when using
the preformed clamps on the C001 tool.
The adapter allows the clamp to be correctly
formed and tail broken flush to the ring.
BDT J001 • 2 lbs.
No.
DVC HSS8
DVC HSS10
DVC HSS12
DVC HSS16
DVC HSS20
DVC HSS24
DVC HSS28
DVC HSS32
DVC HSS36
DVC HSS40
DVC HSS44
DVC HSS48
Diameter Range
From
To
Sh. Wt.
1/2"
29/32"
1 oz.
9/16"
1 1/16"
1 oz.
11/16"
1 1/4"
1 oz.
13/16"
1 1/2"
1 oz.
13/16"
1 3/4"
1 oz.
1 1/16"
2"
1 oz.
1 5/16"
2 1/4"
1 oz.
1 9/16"
2 1/2"
1 oz.
1 13/16"
2 3/4"
1 oz.
2 1/16"
3"
1 oz.
2 5/16"
3 1/4"
1 oz.
2 9/16"
3 1/2"
1 oz.
WORM GEAR CLAMPS - STYLE MAH
T-handle screw tensioning tool for up to 5/8"
wide preformed bands
BDT T300 • 3.2 lbs.
No.
DVC
DVC
DVC
DVC
MAH4
MAH6
MAH8
MAH10
Diameter Range
From
To
Sh. Wt.
7/32"
5/8"
1 oz.
7/16"
25/32"
1 oz.
1/2"
29/32"
1 oz.
9/16"
1 1/16"
1 oz.
CENTER PuNCH TOOL
These ratchet action tensioning tools are for
applying center punch and center punch open
end clamps with a center punch lock.
BDT S38 • 1 lb.
“T" BOLT
CLAMPS
Style STBC
POk-IT-TOOL
Lightweight pocket size tool for use with
1/4-3/8" width band. It applies tension and
has a built-in cutter.
DVC STBC188 from 1.724" to 1.942"
DVC STBC200 from 1.844" to 2.062"
DVC STBC225 from 2.094" to 2.312"
DVC STBC250 from 2.344" to 2.562"
DVC STBC275 from 2.516" to 2.812"
DVC STBC300 from 2.766" to 3.062"
DVC STBC325 from 3.016" to 3.312"
DVC STBC350 from 3.266" to 3.562"
DVC STBC375 from 3.516" to 3.812"
BDT J020 • 1.5 lbs.
PSI
0-60
0-100
0-200
0-300
0-600
0-1000
0-1500
0-2000
0-3000
0-5000
0-10000
Hypro Model
HYP 2640-0009
HYP 2640-0010
HYP 2640-0011
HYP 2640-0007
HYP 2640-0008
HYP 2640-0001
HYP 2640-0002
HYP 2640-0003
HYP 2640-0004
HYP 2640-0005
HYP 2640-0014
WT.
.5 lbs.
.5 lbs.
.5 lbs.
.5 lbs.
.5 lbs.
.5 lbs.
.5 lbs.
.5 lbs.
.5 lbs.
.5 lbs.
.5 lbs.
GG SERIES GLYCERIN-fILLED GAuGE
Designed for use with air,
gas, oil and water. Brass
movement, phosphor
bronze Bourdon tube,
black enameled
aluminum pointer, white
background dial, acrylic
window. 2 1/2" face.
Stem size 1/4" NPT
connection and U-clamp.
PSI
Hypro Model
WT.
0-60
0-100
0-160
0-200
0-300
0-400
0-600
0-1000
0-1500
0-2000
0-3000
0-5000
0-6000
HYP WGG60C
HYP WGG100C
HYP WGG160C
HYP WGG200C
HYP WGG300C
HYP WGG400C
HYP WGG600C
HYP WGG1000C
HYP WGG1500C
HYP WGG2000C
HYP WGG3000C
HYP WGG5000C
HYP WGG6000C
.5 lbs.
.5 lbs.
.5 lbs.
.5 lbs.
.5 lbs.
.5 lbs.
.5 lbs.
.5 lbs.
.5 lbs.
.5 lbs.
.5 lbs.
.5 lbs.
.5 lbs.
DIXON STANDARD
DRY GAuGESACCESSORIES
1.5% accuracy, black steel case,
acrylic crystal, black aluminum pointer,
1/4" lower mount.
DVC GL115 - 0-30 PSI, 1 1/2" Face • .5 lb.
DVC GL120 - 0-60 PSI, 1 1/2" Face • .5 lb.
DVC GL320 - 0-30 PSI, 2 1/2" Face • .5 lb.
DVC GL325 - 0-60 PSI, 2 1/2" Face • .5 lb.
DVC GL330 - 0-100 PSI, 2 1/2" Face • .5 lb.
DVC GL335 - 0-160 PSI, 2 1/2" Face • .5 lb.
DVC GL340 - 0-200 PSI, 2 1/2" Face • .5 lb.
DVC GL345 - 0-300 PSI, 2 1/2" Face • .5 lb.
DVC GL350 - 0-600 PSI, 2 1/2" Face • .5 lb.
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
BAR
4
7
14
21
42
70
105
140
210
350
700
HOSE BANDS/GAUGES
CENTER PuNCH TOOL
Miniature all stainless construction with
combination 1/4" hexagon and screwdriver
slotted screw. 5/16" band width.
• Silicone-filled gauge
• Stainless Steel Case
• 2 1/2" Face
• 1/4" NPT (M) Fitting
• Bronze Bourdon Tube
• Dual Scale Dial
• Brass Stem
• Clear Acrylic Lens
105
(formerly Sperian Protection Americas)
SURVIVAIR® Opti-Fit™ AIR PURIFYING RESPIRATOR
• Adjustable 5-point strap suspension
• Wide viewing area offering distortion free visibility and optical clarity
• Silicone skirt offers exceptional durability and comfort
• Replaceable, high-impact resistant polycarbonate lens treated with
anti-scratch coating
• Molded in speaking diaphragm provides improved audio transmission
for communication
• Available in three sizes for wide range of fit
• Uses T Series (bayonet mount) cartridges
• Complies w/ NIOSH 42 CFR 84
Supplied with one set (2) of organic vapor cartridges (T01) and
one set (2) of filters (R95) complete with 2 filter retainers (RP22R).
SET 758000-S – Small Facepiece
SET 768000-M – Medium Facepiece
SET 778000-L – Large Facepiece
Powered Air Purifying Respirators
for Agriculture/Horticulture
All models will operate for up to 4 hours on a fully-charged battery pack
Prof 88
K80S-T8N
Supplied with
12V power cord
for lighter socket
RESPIRATORS
Available w/ 12V
power cord or
110V wall charger
Fan, batteries and filters are incorporated
into the helmet, giving you excellent freedom of movement in fields or in tighter
working areas. Supplied with two ZA1/P3
pesticide filters, 12V power cord for lighter
socket and batteries. 110V wall charger is
available.
Fan, battery pack and filters are worn on the waist.
The K80S-T8N units are identical but the (T) model
ships w/ a 12V cord, the (G) model w/ a 110V wall
charger (12V cord and 110V charger available separately). Comes w/ two ZA1/P3 pesticide filters,
charging cord or wall charger, fan and batteries.
KAS 0313072 - PROF88 • 4.5 lbs.
KAS 0601047 - Hepa Filter ea.
KAS 0313141 - K80S-T8N(T) • 8.5 lbs.
KAS 0313195 - K80S-T8N(G) • 8.7 lbs.
KAS 0601019 - Hepa Filter ea.
We've been working with farms and orchards since 1954.
Give us an opportunity to help you!
106
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
For superior quality,safety, fit, comfort and
availability of parts, we recommend Survivair™
SURVIVAIR PREMIER® HALF MASK RESPIRATOR
High quality silicone respirator
available in three sizes with soft
sealing flange. Elastic head straps
adjust for easy fit and unobstructed
vision. Low profile nosepiece
allows for compatibility with
eyewear. Perspiration port reduces
facepiece slippage and skin
irritation. Replaceable parts.
Use T Series cartridges and
filters. NIOSH approved.
SET 311000-S - Small • 1 lb.
SET 312000-M - Medium • 1 lb.
SET 313000-L - Large • 1 lb.
SURVIVAIR VALUAIR® PLUS HALF MASK RESPIRATOR
RESPIRATORS
For limited life applications
without sacrificing comfort and fit.
The thermoplastic elastomer
facepiece reduces cost while
giving you a soft sealing flange
and forward angled nosepiece
to accommodate eyewear.
It has simple, easy to adjust
sliding suspension. Replaceable
parts. Use T Series cartridges
and filters.
NIOSH approved.
SET 301000-S - Small • 1 lb.
SET 302000-M - Medium • 1 lb.
SET 303000-L - Large • 1 lb.
ALL RESPIRATORS REQuIRE A SET (2) Of CARTRIDGES & A SET (2) Of fILTERS
Cartridges:
retainer
filter
cartridge
• The organic vapor cartridges (T01) are
bayonet (1/4 turn) mounted to the
respirator
• The cartridge should be replaced when
no-longer servicable as determined by
the owner and/or supervisor, or an
OSHA change schedule, or earlier if a
contaminant is detected by smell, taste,
irritation or if there is damage to the
cartridge.
• Always replace cartridges in pairs
• Store cartridges in a sealed
containment device (bag) to insure
longer cartridge use.
• NIOSH approved
Filters:
• Filters (R95) are mounted to the
cartridge using a filter retainer
(RP22R)
• The filter should be replaced when
no longer servicable as determined
by the owner and/or supervisor or
when damaged, soiled, contaminated
with water, or causing increased
breathing resistance and discomfort.
• Filter replacement is normally twice
as frequent as the cartridge.
• NIOSH approved.
SPE T117010 - filter (R95)
SPE 14900975 - retainer (RP22R)
SPE T100100 - cartridge (T01)
inside
outside
SAF-T-FIT® Plus
• Foil sealing flange and exhalation valve
• Nose bridge provides the wearer increased
comfort and fit
• Lightweight, humidity-resistant, latex-free
media for lower breathing resistance:
60% improvement in measured fit factors
42% lower exhalation breathing resistance
34% lower inhalation breathing resistance
• NIOSH-approved N95 protection
SPE 14110428 - M/L
SPE 14110429 - XL
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
107
A70® Coveralls
Disposable Protective
Apparel
A polyethelene-coated
fabric. Lightweight and
resistant to many waterbased liquids, greases, oils,
liquid splashes and sprays.
CA approved for protection
in pesticide applications.
Use when warning label
reads “chemical resistant
garment when spraying or
mixing is required by label”.
Liquid-resistant extra long
zipper and taped storm
flap. Made with NFPA 99
compliant antistatic
material; includes coveralls
with hood. Yellow.
HOOD
KIM K4509812 - Medium
KIM K4509813 - Large
KIM K4509814 - XLarge
KIM K4509815 - XXLarge
Coveralls
Lightweight, breathable fabric
that is strong and abrasion
resistant for extended wear.
Good protection against dry
particulates and light liquid
sprays. Ideal for general
maintenance, cleanup,
food processing and dusty
environments. Not normally
used for spraying. Zipper front
style, no hood. 24 per case.
Also sold individually. White.
NO HOOD
KIM 49002 - Medium
KIM 49003 - Large
KIM 49004 - XLarge
KIM 49005 - XXLarge
Select Coveralls
PERSONAL PROTECTION
A strong and breathable
3-layer fabric designed to
offer protection against fine
dusts, fibers and low surface
liquid splashes. CA approved
for pesticide application
garment. Ideal for painting,
spraying, maintenance, and
handling grease and oils.
Denim Blue, 24 per case.
Zipper front, elastic back,
wrists and ankles.
NO HOOD
KIM 58502 - Medium
KIM 58503 - Large
KIM 58504 - XLarge
KIM 58505 - XXLarge
Hood
HOOD
KIM 58512 - Medium
KIM 58513 - Large
KIM 58514 - XLarge
KIM 58515 - XXLarge
No Hood
Note: If pesticide warning label reads "coveralls required" KleenGuard
or Kleenguard Select are acceptable. If warning label reads "chemical
resistant garment required" Repel is the fabric to use.Special Note: For
blood borne pathogen rated garments use KleenGuard Ultra, available
by special order only. Other styles and garments available by special
order.
Heavy ribbed PVC w/ soft, blended
polyester/nylon lining. Stitched welded seams.
Non-conductive, non-corrosive hardware.
Material stays pliable in cold temperatures. Excellent all weather suit
for multiple applications.
Jacket features snap-on drawstring hood. Snaps at wrist. No underarm vents.
Sizes: M, L, XL, 2XL
RIV 600J
Bib overalls feature elastic
in straps. Snaps at ankle.
No fly.
Sizes: M, L, XL, 2XL
RIV 600BP
NEW
108
Alpha Size
Numerical Size
Jackets
Small
36-38
Medium
40-42
Large
44-46
XLarge
48-50
XXLarge
52-54
Chest
44
48
52
58
60
Sleeve
27
28
29
30
31
Length
30
30
30
30
30
Overalls Waist
and
Inseam
Pants
36
38
42
46
48
28
29
30
32
32
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
NEW
Sync
Digital AM/FM Radio
w/ Audio Input
for MP3
High Performance Muff
Provides excellent full spectrum
attenuation as well as superb low
noise reduction. It comes with a
fork type headband for even
distribution of pressure with a soft
padded head cusion for the highest
degree of comfort. It has improved
balance and extra deep ear cups.
Tests 29 dB NRR.
These earmuffs deliver
superior AM/FM sound,
while their lightweight
design and cushioned
headband ensure
superb comfort for
all-day wear. The
earmuff’s flexible
antenna provides
high-quality reception
and is built to stand up
to work environments.
ELV HB-650
ValueMuff™
A basic ear muff at a very
reasonable price that is
comfortable, great looking with
a noise reduction rating of 25 dB.
It has soft and pliable SuperSeal
ear cusions with a solid, durable
headband.
SPE 1030331 • 20 oz.
ELV HB-25
• High quality AM/FM radio reception
• Radio and audio volume does not exceed 82 dB
• 10 station memory presets
• Audio input jack; 3.5 mm cable included
• Digital AM/FM tuning with LCD display
• Lightweight design provides all-day comfort
• Cushioned headband for all-day comfort
• Reinforced fork slides for easy and comfortable fit
• Snap-in ear cushions make replacement quick and easy
• 111-hour battery life from two (2) AA batteries included
Our Extraterrestrial (XTS)
safety glasses with an
updated design, great fit
and coverage is Ballistic
Vo rated and complies
with ANSI Z87.1-2003.
Anti-slip rubber temple
tips and a choice of
frame colors. 99%
coverage against UV
light. Hardcoat PC lens.
A best seller and a top
of the line safety glass.
1 oz.
Lightweight stylish safety glass with a rubber
nose bridge and colorful rubber inserts at
temples. A good looking pair of glasses.
Tested to ANSI Z87.1-2003. 0.8 oz.
ELV SG-14B - ice blue
ELV SG-14C - clear
ELV SG-14G - gray
ELV SG-14M - flash mirror
ELV SG-24-I/O - indoor/outdoor
ELV SG-24M - silver coated
Bifocals
Combining a safety glass as a safety
reader is a brilliant idea, and these
are some of the best out there.
Comfortable with a soft rubber nose
bridge and temple inserts, these
bifocals are available in three lens
variations in a golden brown frame.
ANSI Z87.1 compliant. 1.2 oz.
Visionaire® Goggle
High performance goggle
with polycarbonate lens with
inside anti-fog treatment, four
ventilation slots, extra wide strap
- all with a comfortable
fit. Meets ANSI Z87 safety
EYE/EAR PROTECTION
SG-14G
• 8 oz.
XTS™
Xenon™
SG-14C
• 11 oz.
standards.
ELV RX-350C-1.5 - Bifocal strength
ELV RX-350C-2.0 - Bifocal strength
ELV RX-350C-2.5 - Bifocal strength
ELV GG-30-AF • goggle
ELV RL-30-AF • replaceable lens
Disposable Ear Pods
Ear Pods
One of our customers found these for us! Much improved
over the others, these fit so comfortably; smooth and
ergonomic pods fit in the ear for maximum protection.
The band design prevents ear pods from touching dirty
or contaminated surfaces when set down. NRR 27 dB
SPE QB1HYG - band
SPE QB100HYG - replacement pods
CA foam plug that is easy to use and provides
excellent attenuation is visually easy to
monitor with multi-lingual packaging. They
are easy to insert correctly with a tapered
shape and slow expansion rate. Preserve
your hearing! Rated NRR of 32 dB.
ELV EP-201 - Box, 200 pair
ELV EP-211 -
Box-corded, 100 pair
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
109
Leather Palm Gloves
Golden Knit
Strong, grain pigskin leather and rubberized
cuff mark the features of a remarkable allpurpose glove. Leather dries soft. Unlined.
Choose Men’s S, M, L, XL – Unlined
A durable working glove with PVC
webbing on palm and back with
reversible thumb. Men’s S, M, L, XL.
KCO 1917
KCO 1778
Thermal Gripping Gloves
KCO 1917KW
Thermal lined gripping gloves –
great for picking up wet materials,
fall cleanup and other damp working conditions. Has a sure-grip
palm with breathable back. 100%
acrylic knitted shell, Latex coated
palm. Fantastic glove.
Lined Pigskin Gloves
KCO 1790 • Men’s S, M, L, XL
KCO 1790W • Women’s S, M
Leather with Knit Wrist
The same glove as above, but with a knit
wrist. BEST GLOVE OuT THERE!
Choose S, M, L, XL - Unlined
Open cuff KCO 1927.. Innovators of
“The Original" lined grain pigskin
leather, this glove has a trademarked
material back and cuff with the warmth
of a Heatkeep™ lining.
Choose Men’s M, L, XL
KCO 1927 - Lined
Lightweight Gripping Gloves
Breathable, gray poly/cotton knitted
shell with blue latex coated palm.
Comfortable elastic knit wrist and a
great choice when you need a lighter
weight glove. Washable.
KCO 1791 - S, M, L, XL
Lined Knit Wrist Gloves
Nitrile Gloves
Just like glove mentioned above, but
with a comfortable knit wrist. Keep
your hands warm and dry. Compared
to cowhide, pigskin will stand up to
twice the abrasion and wear.
Choose Men’s S, M, L, XL
Nylon, breathable knitted shell with smooth finish and Nitrile
coated palm and fingers. Excellent for garden planting and
weeding. Form fitting and washable.
KCO 1927KW - Lined
High Visibility Gloves
Wa r m , g r a i n p i g s ki n g l o v e w i th
w a te r p r o o f i n sert. Triple layers
protect against cold and wet.
3M Scotchlite™ Reflective Material with
knitted cuff. Choose Men’s M, L, XL
GLOVES
KCO 1939KWP
Lined Pigskin Gloves
Heatkeep® lined pigskin grain/suede
gloves are great for wind protection.
Snug knit wrist, keystone thumb.
Choose Men’s S, M, L, XL
KCO 94HK
Women’s
KCO 1891W - S, M, L
Men’s navy blue
KCO 1890 - S, M, L, XL
Bamboo Gloves
Terrific new bamboo gloves with
Latex coated palm and fingers
and threaded color bamboo knit
shell. Snug elastic knit wrist,
comfortable and environmentally
friendly. Women's
KCO 1781W - S, M, L • purple
Ansell Reusable Nitrile Gloves
Nitrile Gloves
Embossed, straight cuff, chemical & solvent
resistant gloves. Unlined. Available in 2 lengths.
13" gloves 15 mils thick in Men’s XS, S, M, L, XL
PVC Gloves
Long 18" smooth PVC gloves with cotton
interlock lining. Black in Men’s Large only.
The long gauntlet provides added
protection.
KCO 7388
PVC Gloves
Long 14" gauntlet non-slip PVC gloves
with a thermal foam lining. Fluorescent
orange in Men’s Large only, useful working with high temperature liquid.
KCO 4184
110
EDM 37-155
18" gloves 22 mils thick in Men’s S, M, L, XL
EDM 37-185
Ansell Disposable Nitrile Gloves
NEW
100% nitrile - no fillers or additives. 4 mil thickness with 3x the punture resistence of latex or
vinyl. Component materials comply with FDA
regulations for food contact. Lightly powdered on
the inside.
100 gloves/box. Fits either hand.
Choose S, M, L, XL
EDM 92-500
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
NEW
• naturally durable
• purely refined
• total comfort
The H2O offers a seamless knit shell
with a full coating (to the wrist) with
latex, making it form fitting and flexible
while keeping hands dry. The palm is
double coated with micro-surface latex
for a superior grip. Machine washable,
these gloves are perfect for wet and
muddy jobs.
Buzz Off Insect Shield
Binds permethrin (a man-made version
of the natural insect repellent found in
chrysanthemums) tightly to fabric fibers, resulting
in effective, odorless insect protection. Our bandana’s have been very
popular and are available in 3 great colors. Good for at least 25 washings, it will keep mosquitoes and pesky gnats at bay. EPA
registered. Quit going through the torture! 2.3 oz.
Pictured left to right:
BUZ 3353-0335 • Water Paisley
BUZ 3353-0334 • Rose Butterfly
BUZ 3353-0336 • Garden Check
WCG 027B - Blue S, M, L, XL
Tough Mud is the newest addition to
the Mud collection. The soft, durable
and breathable nylon shell coated with
tough nitrile offers excellent grip and
wear resistance. The perfect glove for
planting seeds, working with small
hand tools, or for any task requiring
dexterity.
WCG 026R - Red XS, S, M, L
The Natural, made with goatskin
leather, has natural lanolin to help
keep hands soft and smooth. The
stretchable polyester mesh back provides ventilation to keep your hands
cool and dry when working in the garden or around the house.
WCG 050G - Emerald S, M, L
WCG 050B - Sapphire S, M, L
The BugBand Wristband
Protects you from mosquitoes, flies, gnats, no-see-ums and ticks. Wear it on
your wrist, ankle, baby stroller, belt loop, etc. Don’t leave it behind when going
to an outdoor event! Contains Geraniol (oil extracted from geranium oil) is water
resistant and DEET free; works up to 120 hours, is packaged in reusable plastic
pod, and comes in multiple colors. 0.6 oz.
BUG 88207 – blue
BUG 88205 – green
BUG 88202 – pink
BUG 88203 – red
BUG 88204 – yellow
BugBand Pump Spray
Geraniol, a powerful ingredient extracted from geranium
oil provides a natural effective plant-based mosquito
repellent. Use once for hours of insect protection.
Pleasant smell.
BUG 88336 – Spray lotion • 6 oz.
••••••KIDS • KIDS • KIDS••••••
Lined Work Gloves
KCO 1927KWY - Ages 7-12
Lined Mittens
Soft and durable ultra suede mitten with warm
fleecy lining for cold weather. Shirred elastic
wrist for a snug fit. Adorable!
KCO 1930C - Ages 3-6
Cowhide Leather Palm Gloves
GLOVES
Lined soft ultra suede palm material and
trademark striped back. Knit wrist and warm,
fleecy lining for cold weather.
KCO 1927KWC - Ages 3-6
YakTrax Pro
Heavy duty rust resistant steel coils provide forward and backward stability while you navigate ice and snow conditions. Easy
on and off, lightweight, durable and flexible. Adjustable strap
helps to keep it in place. Work confidently on packed snow and
ice with the Pro! Black. 5.5 oz.
Shoe size
YAK PB-S - Small Men's 5-8.5 / Women's 6.5-10
YAK PB-M - Medium Men's 9-11 / Women's 10.5-12.5
YAK PB-L - Large Men's 11.5-13.5 / Women's 13-15
Gray cowhide leather palm with rubberized safety
cuff and wing thumb. Terrific first work glove!
KCO 1500C - Ages 3-6
KCO 1500Y - Ages 7-12
Latex Dipped Gloves
Green latex palm and fingers with comfortable
cotton shell. Get the kids planting and keep their
hands clean!
KCO 1785C - Ages 3-6
KCO 1785Y - Ages 7-12
HAND & TOE DISPOSABLE WARMERS
All day, air activated, time released. Each
pouch contains a mixture of iron powder,
water, vermiculite, cellulose, activated carbon and salt. Keep in zip-seal polybag to
preserve for days. Warms in minutes.
Biodegradable.
OCC 1100-80D - Hand warmers,
Quantity of 5 pair per pack
OCC 1106-40D - Toe warmers,
Quantity 1 pair per pack
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
111
Our sales team reviews books to stay on top of what is happening in our industry.
These are some recommended reference books and make for very interesting reading.
NEW
Cider
A thorough handbook
for making delicious
sweet and hard
ciders; it’s the book
that tells all.
By Annie Proulx and
Lew Nichols
BOK 67520 • 1 lb.
The Grape
Grower
This is the most
comprehensive
and useful book
ever to focus on
table grapes for
the home and
small-scale vineyardist and the production of grapes in the varied growing conditions we encounter. By Lon Rombough
NEW
The Holistic
Orchard
BOK 2829
NEW
The Organic
Backyard
Vineyard
Whether you have
50 square feet or
an acre or more
to plant, this
straightforward guide will arm you with all
the tools you need to successfully grow
organic grapes. By Tom Powers
Phillips blends
ideas from soil
science, holistic
health, permaculture, and traditional fruit growing
into a powerful new approach to orchard
design and care. By Michael Phillips
NEW
BOOKS
The Resilient
Gardener presents
gardening techniques that stand
up to challenges
ranging from health
problems, financial problems, and special dietary needs to serious disasters
and climate change. By Carol Deppe
A guide for organic
gardening techniques and healthy
soil. By Jeff
Lowenfels and
Wayne Lewis
A handy, encyclopedic listing of
fruits provides
in-depth info on
individual fruit
needs, care and
varieties with a
focus on all-natural growing techniques.
By Lee Reich
BOK 071336
Fruit Gardener’s
Bible
From planting to
picking, everything
you need to know
to grown your own
fresh fruits and nuts
in North America.
By Lewis Hill & Leonard Perry
BOK 62567
Check out out website
for the entire collection
112
• Apple Cider
• Best Blueberries
• Grafting Fruit
Trees
• Grow Great
Grapes
• Make Great
Wine
1.75 lbs.
The Garden Primer
The most comprehensive
gardening reference
(revised) including
planning, pruning and
extending the growing
season. By Barbara
Damrosch
BOK 12275
Native Plants of the
Northeast
A fabulous guide for
gardening and conservation.
With entries for nearly 700
species of native trees,
shrubs, vines, ferns, grasses,
and wildflowers from the
northeastern quarter of the
U.S. and eastern Canada,
its horticultural coverage is unsurpassed by any
other single volume. By Donald Leopold
BOK 682673 • 2.8 lbs.
The Truth About ...
Organic
Gardening
BOK 682862
Garden
Remedies
BOK 682912
BOK 689113
Country
Wisdom
Booklets
BOK 071256 •
Grow Fruit
Naturally
BOK 0311
Teaming with
Microbes
The Pruning Book
Whether you're a professional gardener, a landscape veteran, or pruning
for the very first time this
essential reference gives
you everything you need to
master the subtle art of
pruning supported by
250 colorful photos and 135 drawings.
By Lee Reich
BOK 2134
BOK 689285
The Resilient
Gardener
Check out our website
for more titles!
NEW
The Berry
Grower's
Companion
Anyone interested
in the horticultural
aspects of berry
production will find
this book full of
invaluable advice
for beginners and professionals alike.
By Barbara Bowling
Christmas Trees
Resourceful book about
growing and selling
trees, wreaths and
greens. By Lewis Hill
BOK 66566
BOK 682726
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com •Email: [email protected]
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement