cosmetic chemical - Fisher Scientific

cosmetic chemical - Fisher Scientific
INDUSTRIES
COSMETIC
CHEMICAL
www.fishersci.ie
1
INDEX
SAMPLING
SAMPLERS
3-4
SAMPLING VESSELS
4-6
SAMPLE STORAGE
6-8
SOLID PHASE EXTRACTION
SAMPLE PREPARATION
CENTRIFUGATION
14
HOMOGENISATION
16
17-18
FILTRATION
HYGIENE, DISINFECTION
AND PROTECTION
ESSENTIALS
CHROMATOGRAPHY
LIFE SCIENCE
APPLICATIONS
2
8-10
19
INCUBATORS
SAFETY PROTECTION
20-22
VISCOMETERS, BATHS, CHILLERS
23-24
COLORIMETERS, MELTING POINT APPARATUS
25
BALANCES
28
MOISTURE ANALYSERS, TITRATORS
29
REFRACTOMETERS, BOD, OXIDATION
30
KJELDAHL APPARATUS, FURNACES, MICROSCOPES
31
OVENS, ENVIRONMENTAL CHAMBERS, PUMPS
32
PUMPS, THERMOMETERS, TIMERS
33
TIMERS, ULTRAPURE WATER SYSTEM
34
PAPER, COLUMNS, SOLVENTS, VIALS
36
PETRI DISHES, BACTERIOLOGY LOOPS
36
SWABS, BIOLOGICAL SAFETY CABINETS , MICROTUBES
37
EVAPORATORS, ULTRASONIC BATHS
38
www.fishersci.co.uk
SAMPLING
SAMPLERS
SPATULAS, STERILE
SAMPLE SPOONS, STERILE
• Polystyrene, white
• Individually packaged and sterilised by gamma radiation
• Production, assembly and packaging according to cleanroom
Class 7
• With EU foodstuffs and FDA approval
• Available with or without transparent cover to ensure samples
are not contaminated
• Ideal for powders, granulates and pastes
• Polystyrene, white
• Individually packaged and sterilised by gamma radiation
• Production, assembly and packaging according to cleanroom
Class 7
• With EU foodstuffs and FDA approval
• Ideal for powders, granulates and pastes.
Cat No.
Description
Pack qty
Cat No.
Capacity, mL
Pack qty
15336327
Spatula SteriPlast
10
15356327
2.5
100
15346327
Spatula SteriPlast with cover
10
15351766
10
100
SCOOPS, STERILE
SPOONS, STERILE
• Polystyrene, white
• Individually packaged and sterilised by gamma radiation
• Production, assembly and packaging according to cleanroom
Class 7
• With EU foodstuffs and FDA approval
• Ideal for powders, granulates and pastes
• Available with or without transparent cover to ensure samples
are not contaminated
• Polystyrene, white
• Traceability on each bag
• Certifications: EC N°1935/2004, ISO 11137
• Individual packaging
Cat No.
Capacity, mL
Pack qty
Without cover
Cat No.
Capacity, mL
Length, mm
Pack qty
15366317
25
10
11847363
2
125
1,000
15386317
50
10
11713114
8
150
1,000
15306327
100
10
15316327
150
10
With cover
15376317
25
10
15396317
50
10
15390937
100
10
SCOOPS
TWEEZERS
• Made from food safe polypropylene
• Top is flat for levelling off powders
• Base is flat enabling scoops to stand horizontally
• The capacity is clearly moulded on each size
• High quality, autoclavable tweezers
• Available with pointed or rounded ends
• Fine tooth grips for secure handling of samples
Cat No.
Capacity, mL
Length, mm
Pack qty
Cat No.
Description
Material
Length, mm
Pack qty
12591506
2
60
5
12054618
Pointed ends
PMP white
115
1
160
5
12043984 Rounded ends POM amber
250
1
11323724 50
www.fishersci.ie
3
SAMPLING
SAMPLERS
SAMPLERS, MINI
VISCOSAMPLERS
SCOOPS
Sampler for viscous substances such as pastes, mud, creams,
oils. The sample is drawn in using the pump rod and directly
conveyed to the sampling container.
• Stainless steel V4A (1.4404), seals PTFE
• Sterilisable
• Ideal for the pharmaceutical and cosmetics industry
• Including suction tip 2mm
• Additional suction tips (2mm; 4mm; 6mm) available
• 15mm diameter
Cat No.
10461341
Capacity, mL
Length, mm
30
100
Cat No.
Capacity, mL
Length, mm
Pack qty
11921581
10
34
1
10503252
100
65
1
Pack qty
10403522
250
95
1
1
10044067
500
125
1
10683523
1,000
155
1
10461151
50
600
1
10421731
75
1,500
1
SCREW CAP DIPPERS WITH
REMOVABLE HANDLE
SAMPLE DIPPERS, STERILE,
THERMO SCIENTIFIC
STERILIN DIPPA™
• Polypropylene blue containers
• Removable handle
• Shock resistant
• Packaged individually in tamper evident single zip bags
• Traceability information on each bag
• Sterile SAL 10 -3
• Polystyrene
• With caps
• Facilitate sample collection and transportation to the lab in a
single container using Thermo Scientific™ Sterilin™ Dippas™
to reduce risk of cross-contamination
• Individual packaging
Capacity,
mL
Height with
caps, mm
Height
with handle, mm
Outer
diameter, mm
Pack qty
15488794
40
80
290
43
250
15408804
125
74
275
52
250
15498794
180
102
305
52
250
Cat No.
• PTFE, white
• All parts coming into contact with the sample medium are
made of pure white PTFE
• Completely inert against all substances (with the exception of
elementary fluoride)
• Autoclavable
Cat No.
Capacity, mL
Colour
Handle length, mm
Pack qty
11729352
30
Clear
200
50
11788848
100
Clear
385
400
11748938
250
Clear
330
50
11738938
30
Blue
200
50
11798848
100
Blue
385
100
11758938
250
Blue
330
50
Cosmetic Industry –
Is water quality important to your process?
Our Water Analysis brochure features a comprehensive range of high quality
and reliable products to collect, store and prepare your sample.
APPLICATIONS & SOLUTIONS SERIES:
WATER ANALYSIS
Discover how you can validate a large range of parameters during all steps of
your processes.
Available on eu.fishersci.com
4
www.fishersci.co.uk
SAMPLING VESSELS
BEAKERS WITH HANDLE
GRADUATED
BEAKERS, DISPOSABLE
• Four-way pour spout for flexibility
• Polystyrene
• Chemical resistant to dilute or weak acids, aqueous solutions,
alcohols, and bases
•Withstand temperatures to 93°C (200°F)
• Graduations in mL and oz., accurate to ±2%
Cat No.
Capacity, mL
Pack qty
11738549
20
500
• Tapered jugs in high clarity polypropylene
• Crisp blue printed graduations
• Autoclavable at 121°C
• Ergonomically designed handle with thumb grip for easy
carrying
• Polypropylene
• For use in: laboratories for handling chemicals
• This product is suitable for food contact applications in
accordance with EU and\or USA regulations
• Maximum Temperature: -20 to 135°C
11748549
50
500
11758549
150
100
Cat No.
Capacity, mL
Height, mm
Pack qty
11768549
250
100
10667825
250
100
1
11778549
800
100
10074084
500
120
1
11788549
1,000
100
11363434
1,000
150
1
10718205
2,000
187
1
11990985
3,000
215
1
SQUARE BOTTLES SINGLE
USE, WIDE NECK
ROUND BOTTLES SINGLE
USE, WIDE NECK
• Single use, HDPE, square bottles
• For research use only, unless otherwise indicated
• Certifications: EC N°1935/2004
Cat No.
Capacity,
mL
Sterile
Dimensions,
L x W x H,mm
Closure type
Neck
diameter, mm
• Single use, HDPE, round bottles
• For research use only, unless otherwise indicated
• Certifications: EC N°1935/2004
Pack qty
Cat No.
Capacity,
mL
Sterile
Dimensions,
L x W x H,mm
Closure type
Neck
diameter, mm
300
11733024
100
No
51 x 51 x 80
Double closure:
polyethylene
37
seal and screw
cap
335
Pack qty
11793024 150
No
50 x 50 x 95
Double closure:
polyethylene
37
seal and screw
cap
11703034 150
No
50 x 50 x 95
Leakproof
screw cap with
tresylene seal
37
300
11743024
100
No
51 x 51 x 80
37
335
11713034 150
Yes
50 x 50 x 95
Double closure:
polyethylene
37
seal and screw
cap
Leakproof
screw cap with
tresylene seal
300
11743064
250
No
60 x 60 x 125
Leakproof
screw cap with
tresylene seal
37
145
11753094
500
No
80 x 80 x 136
Leakproof
screw cap with
tresylene seal
37
140
95 x 76 x 185
Double closure:
polyethylene
58
seal and screw
cap
11778653 1,000
No
101 x 101
x 174
Double closure:
polyethylene
seal and screw
cap
68
95 x 76 x 185
Double closure:
polyethylene
58
seal and screw
cap
11788653
1,000
Yes
101 x 101
x 174
Double closure:
polyethylene
seal and screw
cap
68
95 x 76 x 185
Leakproof
screw cap with
tresylene seal
11798653
1,000
No
101 x 101
x 174
Leakproof
screw cap with
tresylene seal
68
11728643 1,000
11718653
11748653
1,000
1,000
No
Yes
No
58
90
90
90
www.fishersci.ie
5
SAMPLING
SAMPLING VESSELS
BOTTLES, WIDE MOUTH,
HDPE, CLEAR
BOTTLES, OCTAGONAL, PET
• Leakproof
• Higher temperature-use rating than LDPE - up to 120°C (248°F)
for short periods and 110°C (230°F) for continuous use
• Brittleness temperature at -100°C (-148°F)
• Bottles may be radiation, EtO or chemically sterilised
• Not autoclavable
Cat No.
Capacity, mL
Dimensions, mm (dia. x h)
Pack qty
11775243
30
36 x 64
72
11785243
60
38 x 86
72
• Transparent as glass
• Molded with graduations every 25mL
• HDPE Tamper evident screw cap
• Highly ergonomic
• Sterile 103
• Food contact compliant
Cat No.
Capacity,
mL
Sterile
Dimensions,
L x W x H,mm
Closure type
Neck
diameter, mm
Pack qty
12654853
125
Yes
53 x 53 x 108
Tamper evident
screw cap
31.7
231
15370242
250
Yes
63 x 63 x 132
Tamper evident
screw cap
31.7
144
15309094
500
Yes
74 x 74 x 170
Tamper evident
screw cap
31.7
120
Yes
92,5 x 92,5
x 212
Tamper evident
screw cap
31.7
48
12684853
1,000
CONTAINERS,
POLYPROPYLENE, SNAP CAP
STRAIGHT CONTAINERS
• Leakproof
• No cross contamination risks
• Assembled shape
• Outside Diameter: 105mm
• Height: 130mm
• Colour: Natural
• Certifications: EC N°1935/2004
• Material and colour of the container : Natural polypropylene • Material of the secondary body : LDPE • Shape : assembled
• CE marking : CE, IVD • Food contact : Raw material is compliant with regulation EC
N°1935/2004 when sterile : sterility Assurance Level based on
ISO 11137 : STERILE SAL 10-3
Cat No.
Capacity, mL
Description
Pack qty
11783154
960
Container cap separate
250
11703164
960
Cap on container - sterilised
80
Sterile
Dimensions,
dia. x height, mm
Closure type
Pack qty
15438814 60
Yes
33 x 70
Screw cap red
700
15458814 60
No
33 x 70
Screw cap blue
700
15468814 60
Yes
33 x 70
Screw cap red
700
15478814
60
No
33 x 70
Screw cap white
700
15468824
125
Yes
52 x 74
Screw cap red
380
15498824
125
No
52 x 74
Screw cap blue
380
15408834
125
No
52 x 74
Screw cap red
380
15418834
125
No
52 x 74
Screw cap white
380
Cat No.
Capacity,
mL
SPECIMEN CONTAINERS
SPECIMEN CONTAINERS
• C ontainers with captive hinged cap suitable for many
applications
• Lightweight and unbreakable in normal use
• Can withstand temperatures up to 80°C
• Cap colour: clear
• Clear polystyrene containers with maximum sample visibility
• Polyethylene airtight snap-on lids for quick easy use
Cat No.
Capacity, mL
Diameter, mm
Height, mm
Pack qty
Cat No.
Capacity, mL
Diameter, mm
Height, mm
Pack qty
10135874
1
8
38
20
11323614
10
26
28
10
12783335
2.5
12
40
20
11333614
20
32
33
10
12453561
30
36
33
10
10739555
5
15
49
20
10717465
10
28
352
10
12463561
50
36
53
10
10584745
20
32
36
10
11353614
100
51
60
10
12793335
25
25
78
10
6
www.fishersci.co.uk
SAMPLING VESSELS
BOTTLES, SODA GLASS,
STRAIGHT SIDED
CONTAINER UNIVERSAL
• Ideal for soil sampling and environmental applications.
• Straight sided walls allow for the complete removal of
contents
• Bottles are autoclavable but the caps are not autoclavable
• Bottles are packed with PTFE lined caps ready-fitted
• Available certified cleaned per EPA guidelines for semivolatiles, pesticides, PBCs and metals. A certificate of analysis
is attached to each lot
• Safety coated bottles are ideal for field sampling applications.
The shatter resistant coating reduces the chance of breakage
in the event the container is dropped. If the bottle does break,
the coating will safely contain the contents long enough for
disposal. The non-slip coating also allows greater ease of
stability in handling containers, whether wet or dry.
Secure excellent temperature and chemical resistance with
95kPa compliant and CE marked 30mL leak-resistant Thermo
Scientific™ Sterilin™ polypropylene 30mL universal container.
Aseptically manufactured.
Cat No.
Capacity, mL
Diameter, mm
Height, mm
Pack qty
12653546
30
31
94
400
Cat No.
Capacity,
mL
Dia. x H,
mm
Thread style
Mouth ID, mm
Pack qty
11744339
500
91x 95
89/400
69.8
12
11754339
1,000
95 x 170
89/400
74.1
12
BOTTLES, YOUTILITY
LABORATORY TRAYS,
ALL-PURPOSE
The DURAN™ YOUTILITY Laboratory Bottle GL 45 represents a
new generation of glass laboratory bottles for use in a wide and
diverse range of applications. The innovation does not stop at
the improved ergonomics bottle shape, but extends to dedicated
accessories that incorporate many new innovative features to
improve handling, sample identification, and ease of use. The
new YOUTILITY bottles and accessories help to make laboratory
work easier, safer, more economical and fun.
• Complete bottle system - includes pouring ring, GL 45 screw
cap
• Clear glass
• Specially shaped gripping zones on both sides of the bottle for
easier and safer handling
These laboratory trays are practical, all-purpose trays that
can be nested when empty, and are durable, shatterproof and
resist flexing. Also suitable as a spill trough for environmentally
dangerous aggressive substances, for laboratory work, as
an etching tray, as an instrument holder, a medicine tray, for
photographic development, as a sample presentation tray or a
display tray for foodstuffs.
• Polypropylene, white
• Manufactured using injection moulding, not by deep drawing
• Trays can be nested
• Tray not suitable for temperature controlled cupboards or
dishwashers
• Temperature resistant up to +60°C (briefly up to +80°C)
Cat No.
Capacity, mL
Diameter, mm
Height, mm
Pack qty
15233375
125
55
124
4
15223375
250
66
158
4
15243375
500
78
193
4
15253375
1000
93
253
4
Cat No.
Capacity, mL
Dimensions, L x W, mm
Pack qty
10130501
500
180 x 130
1
10028320
1500
240 x 180
1
PIPETTES GRADUATED,
TYPE 1 CLASS
SAMPLE BAGS STERIBAG
SteriBag sterilised sampling bags are ideal for samples in
chemistry, pharmaceuticals, medicine, veterinary science and
foodstuffs. The bags are made of polyethylene and are therefore
exceptionally tearproof and leakproof.
• Sterilised
• Can be labelled
• Leakproof
• Save space
• Transparent
• With practical tear-open closure
• Proven millions of times
• Complies with ISO 835
• Calibrated to deliver from zero at the top to any graduation line
down to the shoulder
• Graduations in permanent amber stain which resists
aggressive washing solutions
• Each pipette is calibrated to deliver with a +5s. waiting time
• Manufactured from soda lime glass with tooled jets for extra
strength and to ensure correct outflow times
Cat No.
Capacity, mL
Tolerance, mL
Colour code
Pack qty
11359653
1
±0.007
Yellow
2
Cat No.
Capacity, mL
Dimensions, L x W, mm
Labelling area
Pack qty
11379653
5
±0.03
Red
2
10135550
60
127 x 76
No
500
11389653
10
±0.03
Red
2
10607871
150
178 x 79
No
500
11399653
25
±0.10
Green
2
10490951
450
229 x 114
No
500
10658251
650
229 x 140
No
500
10544021
900
305 x 114
No
500
15306297
1,650
305 x 178
No
250
10724784
1,650
305 x 178
Yes
250
www.fishersci.ie
7
SAMPLING
SAMPLING VESSELS
PIPETTES, POLYSTYRENE,
STRAW, STERILE
LIGHTWEIGHT FUNNELS, PP
Manufactured from clear polystyrene, and sterilised at 10kGy,
these straw pipettes are particularly suitable for use with
Stomacher homogeniser bags
• Lightweight polypropylene funnels with ribs that prevent air
locks, allowing rapid filtration
•Autoclavable to 121°C
Cat No.
Overall
length, mm
Overall
height, mm
Stem OD,
at top, mm
Top i.d., mm
Pack qty
10233840
47
47
2
30
10
12024608
107
107
10
75
10
Cat No.
Volume, mL
Length, mm
Inner pack qty
Pack qty
11562772
1
190
25
1,000
SAMCO™ GENERALPURPOSE TRANSFER
PIPETTE
PIPETTES, TRANSFER
Prevent cross-contamination with Thermo Scientific™ Samco™
general purpose transfer pipettes, which have a built-in bulb that
eliminates the need for plugging, packaging and autoclaving.
Samco transfer pipettes are made of shatterproof, nontoxic
polyethylene. Their low-affinity surface reduces loss of cells and
valuable proteins due to binding. They can be frozen in liquid
nitrogen, or heat sealed for storage.
• Low density polyethylene
• Transparent
• Graduated or non-graduated
• Various packaging formats
Cat No.
Description
Length,
mm
Drop volume,
mL
Drop per mL
Pack qty
Cat No.
13439108
3mL, graduated
155
40
25
500
62 µL Large Aperture Pipette
13449108
7mL,
non graduated
300
50
20
100
15337893
Length,
cm
13.7
Stem diam.,
mm
6.1
Cat No.
Overall
capacity, mL
Bulb
Draw, mL
Drops
per mL
Inner
pack qty
Pack
qty
Fine Tip Large Bulb
15337833 14.7
6.1
8.7
4.8
45
400
4,000
Extended Fine Tip Small Bulb
15347823
8
10.4
3.0
1.5
1.0
50
400
Inner
pack qty
Pack
qty
9.3
4.8
250
2,500
Eliminate plugging, packaging and autoclaving with Thermo
Scientific™ Samco™ special purpose transfer pipettes, ideal
for delivering drops onto slides or tiles. Single-unit design
features a built-in pipette bulb that eliminates need for plugging,
packaging, autoclaving; prevents cross-contamination.
Perform precise dispensing of small drops into small-volume
containers using Thermo Scientific™ Samco™ Fine-Tip Transfer
Pipettes. These fine-tip pipettes are ideal for removing cell layers
and separating blood samples. Designed with a built-in pipette
bulb, they allow precise dispensing of small drops into smallvolume containers.
Length, Stem diam.,
cm
mm
Bulb
Draw, mL
SAMCO™ SPECIAL
PURPOSE TRANSFER
PIPETTES
SAMCO™ FINE TIP
TRANSFER PIPETTES
Cat No.
Overall
capacity, mL
3,200
Length,
cm
Stem diam.,
mm
Overall
capacity, mL
Bulb
Draw, mL
Inner
pack qty
Pack
qty
3.8
1.0
0.2
500
4,000
3.8
1.0
0.2
500
4,000
3.6
0.8
0.2
500
4,000
Padl-Pet 25 µl Drop Size
15377873
13.1
Padl-Pet 30 µl Drop Size
15387873
13.0
Padl-Pet 50 µl Drop Size
15397873 12.4
www.fishersci.co.uk
SAMPLING VESSELS
Cat No.
SAMCO™ EXTRA LONG
TRANSFER PIPETTE
SAMCO™ NARROW STEM
TRANSFER PIPETTE
Perform safe and easy sampling from large containers using
Thermo Scientific™ Samco™ extra long transfer pipettes. Perfect
for tissue culture applications, these pipettes are designed with
a built-in pipette bulb that eliminates the need for plugging,
packaging, autoclaving and prevents cross-contamination.
Eliminate plugging, packaging and autoclaving with Thermo
Scientific™ Samco™ narrow stem transfer pipettes.. These
polyethylene pipettes prevent cross-contamination and are used
for blood bank applications such as sedimentation procedures.
The single-unit design features a built-in pipette bulb, and a
flexible stem bends to sample from narrow or small tubes.
Length, Stem diam.,
cm
mm
Overall
capacity, mL
Bulb
Draw, mL
Drops
per mL
Inner
pack qty
Pack
qty
23.0
7.3
20
100
1,000
Extra Long 12”
15242079 30.0
8.6
Cat No.
Length,
cm
11641839 15.5
Length, mm
Type
Inner pack qty
Pack qty
150
Unplugged
250
1,000
11566963
230
Unplugged
250
1,000
Graduations, mL
Colour
Pack qty
Pipettes individually wrapped plastic/plastic
Pack
qty
8.0
6.7
3.0
500
5,000
Cat No.
Capacity, mL
Stem length, mm
Total length, mm
Pack qty
11393704
1.5
98
133
100
15573740
5
159
194
100
PIPETTES ONE MARK,
CLASS AS
• Complies with ISO 648 and DIN 12691
• Calibrated for delivery
• Printed with batch code for downloadable batch certificate
• Markings in permanent amber stain
• Class AS with +5s waiting time
• Manufactured from soda lime glass with robust tooled jets
• Non-pyrogenic and non-cytotoxic warranty
• DNase and RNase free
• S upplied in paper/plastic packaging, or plastic/plastic
packaging
• Sterilisation using gamma irradiation
• Pipettes individually wrapped paper/plastic
Capacity, mL
Inner
pack qty
• Corrosion resistant and unbreakable in normal use
• Both sizes are one-piece bellows dispensers
• Plain stem of 7,5 mm diameter
PIPETTES, SEROLOGICAL,
STRAIGHT, POLYSTYRENE,
INDIVIDUALLY WRAPPED
Cat No.
Bulb
Draw, mL
DROPPING PIPETTES
•D
isposable Pasteur pipettes are open point and unplugged
(plain) and manufactured from soda lime glass to BS 5732,
ISO 7712 • Material: soda lime glass
11546963
Overall
capacity, mL
Q-Pet Transfer Pipette
PIPETTES, PASTEUR, SODA
LIME GLASS
Cat No.
Stem diam.,
mm
Cat No.
Capacity, mL
Tolerance, mL
Colour code
Pack qty
11369643
1
±0.008
Blue
2
11379643
2
±0.01
Orange
2
11829660
5
0.1
Blue
200
11389643
5
±0.015
White
2
11839660
10
0.1
Orange
200
11399643
10
±0.02
Red
2
11309653
15
±0.03
Green
2
Pipettes individually wrapped paper/plastic
11849181
1
0.01
Yellow
1,000
11319653
20
±0.03
Yellow
2
11859181
2
0.01
Green
500
11329653
25
±0.03
Blue
2
11869181
5
0.1
Blue
200
11339653
50
±0.05
Red
2
11879181
10
0.1
Orange
200
11349653
100
±0.08
Yellow
2
11839181
25
0.2
Red
200
11889181
50
0.5
Purple
100
www.fishersci.ie
9
SAMPLING
SAMPLING VESSELS
PIPETTORS, MICROMAN E
CAPILLARY PISTONS
MICROMAN™ E positive displacement pipettes, along with
capillary pistons, offer the highest precision when pipetting
problem liquids such as oils, cosmetics, blood, glycerol,
radioactive samples, RNA, DNA, and more!
Working like a syringe, capillary pistons eliminate the air cushion
between the sample and the disposable piston, providing 100%
protection against pipette contamination and producing accurate,
reproducible, and precise results every time.
• Patented QuickSnap CP fitting system allows you to fit a
capillary piston on to MICROMAN E as simply as fitting a
standard tip to a standard pipette.
• Volume Securing Button allows for easy volume adjustment
and minimises the risk of accidently changing the volume
during pipetting cycles.
• Award Winning Design: MICROMAN E received the Red Dot
Product Design Award 2015 for its unique design language in
the Life Science and Medicine Category.
• Improved comfort and ease-of-use:
- A newly shaped handle, with an added finger hook, rests
comfortably in your hand
- Fully visible volumeter on the front of the body, so you can
easily see the volume while pipetting
- Large push button allows you to aspirate and dispense with
ease
• Accuracy & Precision
- The use of Gilson’s pipetting system (MICROMAN fitted with
Capillary Piston) guarantees accuracy and precision.
- Ideal for non-aqueous liquids: viscous, dense, volatile
or potentially dangerous liquids, radioactive or corrosive
reagents.
• Contamination Free
- Contamination-free pipetting and protection for the user
no contact between the sample and the pipette, even with
aerosols or corrosive vapours.
- Free of dyes, no risk of contamination from the CP’s
components.
• High Quality
- Large volume range from 1 µL to 1,000 µL with six different
models to offer the best results.
- Capillaries made of pure polypropylene.
- Lightweight and slim CPs that fit in even the narrowest and
deepest tubes.
Cat No.
Volume, µL
Pack qty
12001532
1-10
960
10726470
3 - 25
960
10866510
20 - 50
960
Cat No.
Min vol., µL
Max vol., µL
Pack qty
10494132
10 - 100
960
15314775
1
10
1
10456925
50 - 250
960
15324775
3
25
1
15334775
20
50
1
15344775
10
100
1
15354775
50
250
1
FINNPIPETTE™ F2
ADJUSTABLE-VOLUME
PIPETTES
PIPETTOR TIPS, THERMO
SCIENTIFIC FINNTIP™
Eliminate the possible effects of hand warmth on the accuracy
of measurements with Thermo Scientific™ Finnpipette™ F2
Adjustable-Volume Pipettes, which feature Advanced Volume
Gearing (AVG) a thermally-isolated self-supporting modular
volume adjustment mechanism that enhances pipetting
performance. Because the AVG mechanism is separated from
the pipette body, its accuracy and precision are significantly
improved.
• L arge Ergovisio display with white numbers on black
background for increased visibility
•D
ouble-action pipetting button; rotating upper part prevents
accidental volume alteration
• L ight, smooth pipetting action enables better results over
longer periods
• Fully autoclavable
• S uper blow-out piston with volumes of 50μL and below
ensures delivery of micro-size drops
Cat No.
Volume range, µL
Accuracy
11827351
1 to 10
±2.5 to 1%
11867351
10 to 100
±3 to 0.8%
11887351
100 to 1,000
±1 to 0.6%
11807361
1,000 to 10,000
±2 to 0.5%
Ensure a better seal with the pipetter module, for higher
accuracy and precision. The Thermo Scientific™ Finntip™ Flex™
pipette tips reduce the amount of force needed to attach and
eject tips, significantly lowering the risk of repetitive stress
injury (RSI).
• Excellent for single and multichannel pipetting
• Sterile tips are supplied in vacuum sealed, sterilised, 10 × 96
rack and they are certified to be free from DNA, DNase, RNase
and Endotoxins
• Save space with refills
Cat No.
Volume, µL
Pack qty
11863420
10
10 x 96
11738184
300
10 x 96
11458479
1,000
10 x 96
10715305
10,000
100
8-channel
11807381
5 to 50
-
10339263
30 to 300
-
10
www.fishersci.co.uk
SAMPLING VESSELS
PIVOT NOZZLE BOTTLES,
LDPE
BOTTLES WITH SPOUTED
CAP, LDPE
• Round LDPE bottles fitted with a pivoting nozzle closure
• Nozzle retracts into cap to seal bottle
• Suitable for use as a dropping or wash bottle and excellent for
dispensing gels
• Good resistance to chemical attack
• Round LDPE bottles fitted with spouted dropper closure
• Closure features a captive sealing cap and can be cut to adjust
flow rate
• Suitable for use as a dropping or dispensing bottle
• Good resistance to chemical attack
Cat No.
Capacity, mL
Diameter, mm
Height, mm
Pack qty
Cat No.
Cap size
Capacity, mL
Diameter, mm
Height, mm
Pack qty
10349794
30
32
66
10
12054827
28R4
30
32
93
10
10411055
60
40
79
10
10709385
28R4
60
40
109
10
150
50
147
10
10399504
150
59
120
10
12084747 28R4
12559185
250
59
145
10
12084707
28R4
250
60
174
10
12569185
500
74
174
10
10044804
28R4
500
73
194
10
SAMPLE STORAGE
600mm WING DOOR SAFETY
CABINETS FOR ACIDS AND
ALKALIS
UNDERBENCH SAFETY
CABINET FOR ACIDS AND
ALKALIS
• Safety elements assembled outside the storage compartment
for increased protection against corrosion, easy to clean
• Two hermetically separated storage compartments
• Cylinder locking (integration in locking system possible)
• Adjusting aids to compensate for uneven floor
• Integrated metal-free air ducts ready for connection (NW 75)
to a technical exhaust system with only one extraction air inlet
• Excellent venting - separate extraction air of storage
compartments
• GS approval
• EN 14727 conformity (laboratory furniture)
• Weight, kg: 125
• Extraction air, NW: 75
• Air exchange 30 times, m3/h: 35
• Pressure drop inside the cabinet, Pa: 56
• Made of highly resistant melamine coated special plates
• Two separated storage compartments (model SL.060.140.UB
and SL.060.110.UB)
• Cylinder locking
• Integrated venting system ready for connection (NW 75) to
a technical exhaust system at the cabinet back, permanent
ventilation of both compartments via only one extraction air
inlet
• GS approval
• EN 14727 conformity (laboratory furniture)
• Weight, kg: 36
• Extraction air, NW: 75
• Air exchange 30 times, m3/h: 7
• Pressure drop inside the cabinet, Pa: 5
Cat No.
Dimensions exterior, W x D x H, mm Dimensions interior, W x D x H, mm Pack qty
12643515
600 x 605 x 1,970
485 x 565 x 930
Cat No.
Dimensions exterior, W x D x H, mm Dimensions interior, W x D x H, mm Pack qty
13479716
590 x 570 x 600
488 x 531 x 562
1
1
www.fishersci.ie
11
SAMPLING
SAMPLE STORAGE
90 MINUTE SAFETY
STORAGE CABINET
Q-CLASSIC-90 RAL-7035
WASTE BIN FOR DISPOSAL
OF CLOTHS, RAGS, WIPERS
SOAKED IN OIL
Type 90 safety storage cabinet Q-CLASSIC-90, Q90.195.060
including three shelves, perforated insert and bottom collecting
sump plastic laminated sheet steel RAL 7035.
• Robust construction and longevity – triple hinged door, safety
elements assembled outside the storage compartment for
increased protection against corrosion, scratch- and impactresistant surface, easy to clean
• Easy handling with comfort – doors stop in any position, selfclosing in the event of fire
• No unauthorised use – doors lockable with cylinder locking
(integration in a locking system possible) and locking state
indicator (red/green)
• Easy transport – integrated transport base with removable,
optional base cover
• Easy alignment - adjusting aids to compensate for uneven floor
• Quickly put into operation – integrated air ducts ready for
connection (NW 75) to a technical exhaust system
• Furnace tested (type test) in accordance with EN 14470-1
• Fire resistance 90 minutes
• GS approval, CE conformity
• EN 14727 conformity (laboratory furniture)
• Maximum load, kg: 600
Raised, ventilated bottom promotes air circulation, prevents
spontaneous combustion.
• Rugged, lead-free galvanised-steel body with reinforced ribs
• Trilingual safety label
• Self-closing, opens easily with foot treadle
Cat No.
Capacity, L
Diam. x Height, mm
Pack qty
11963589
38
354 x 467
1
DISPENSING CAN
Dispensing cans for one handed dispensing of liquids directly
onto work surface, 240mL capacity
• One-handed dispensing of liquids directly onto work surface
• Leakproof, self-closing valve
• Dispensing valve minimises spills and controls excess
• FM approved brass valve, ideal for use with flammables
• Textured HDPE body provides firm grip
Cat No.
Dimensions exterior, W x D x H, mm Dimensions interior, W x D x H, mm Pack qty
11934796
600 x 615 x 1,955
450 x 520 x 1,645
1
Cat No.
Capacity, mL
Diam. x Height, mm
Pack qty
11924776
1,200 x 600 x 1,970
1,130 x 505 x 1,685
1
11933679
240
78 x 139
1
SAMPLE PREPARATION
SOLID PHASE EXTRACTION
CHEMICALS, SOLVENTS
CHEMICALS, REAGENTS
• Certified AR for analysis
• Reagents for sample preparation
Cat No.
Description
Pack qty
Cat No.
10162180
Acetone 2.5
2.5L
Acros Organics
Description
Pack qty
10253470
Cyclohexane
2.5 L
10424225
Ambersep 900, OH form ion-exchange resin
2.5kg
10784941
Dichloromethane
2.5L
10522011
tert-Butyl methyl ether, 99%, pure
2.5L
10437341
Ethanol
2.5L
10702394
N,N-Dimethylformamide, 99.8+%, for spectroscopy ACS
1L
10386320
Ethyl acetate
2.5L
10145263
Osmium tetroxide, 4 wt.% solution in water
10mL
10396090
Methanol
2.5L
10767234
Palladium(II) acetate, 47.5% Pd
1g
10784751
n-heptane
2.5L
10752723
Tetrabromophenol Blue, pure
5g
10315720
Propanol
2.5L
10247043
Titanium(III) chloride, 20% w/w solution in 2N Hydrochloric acid
25mL
10783601
n-hexane
2.5L
13505010
Dextran sulfate sodium salt, approx. M.W. 6,500 - 10,000
25g
10356390
Toluene
2.5L
Fisher Chemical
12
10690311
Anti-bumping granules, extra pure, fused alumina
1kg
10626262
Gum acacia, technical, powder
500g
10754961
Sodium thiosulfate pentahydrate, technical
3kg
www.fishersci.co.uk
SOLID PHASE EXTRACTION
SAMPLE PREPARATION
CYLINDERS, PPCO,
GRADUATED, WITH SPOUT
WASH BOTTLES, LDPE
• Labelled and colour coded for most commonly used solvents
• Translucent with coloured closure
• Comes with vented 38mm closure to prevent solvent drips
• 500mL capacity
• Large rounded base ribbed for reinforcement and stability
• C alibrated ‘To Contain/To Deliver’ at 20°C - meets ASTM
laboratory standards
• C hemical, heat and impact resistant makes these cylinders
excellent for long term use
• No meniscus to confuse readings - eliminates guesswork
Cat No.
Label
Closure colour
Pack qty
11785233
Ethanol
Natural
6
Cat No.
Capacity, L
Pack qty
11745243
Water Solvant
Natural
6
11997874
100
8
11745233
Acetone
Red
6
11907884
250
8
11967874
500
6
11937874
1,000
4
11927874
2,000
2
BOTTLES, CARBOY, HDPE
AND PP
ICE FLAKE MAKER
• E lectronically controlled operation, with self-diagnostic
functions with external alarm lights providing operational
information for early alert and fast diagnosis of operating
issues
• P ressure-based water level monitoring system may work with
demineralised water as well as with standard water
• P lug-n-play configuration right out of the box - just connect
incoming water line and water discharge
• E xternal components constructed from corrosion-resistant
stainless steel, crafted for optimal aesthetic appeal through
superior fit and finish
• E rgonomically convenient, slanted & disappearing storage
bin door
• Front access for easier maintenance
• Front-in, front-out airflow allows for built-in installations
• CFC-free R-134a refrigerant
• Dimensions, mm: 813 x 535 x 621
Fisherbrand carboys are ideal for storing and dispensing purified
water and a wide variety of lab reagents
• Space saving rectangular design
• Wide mouth closure
• Available in 9L or 20L, with or without spigot
• Graduated in litres and gallons
• Material:
- HDPE, able to withstand low temperatures
- Polypropylene, autoclavable
Cat No.
Material
Capacity, L
Pack qty
13458029
HDPE without spigot
9
1
13478029
HDPE without spigot
20
1
13448029
PP without spigot
9
1
13468029
PP without spigot
20
1
13438039
HDPE with spigot
9
1
Cat No.
Output
Capacity, kg
13408039
HDPE with spigot
20
1
10049789
70kg/24hr
25
13418039
PP with spigot
9
1
13428039
PP with spigot
20
1
FOOD
Cosmetic Industry –
Is food analysis important to your process?
ANALYSIS
SCRATCH AND SNIFF
Our Food Analysis brochure features a comprehensive range of high quality
and reliable products to collect, store and prepare your sample.
Discover how you can validate a large range of parameters during all steps of
your processes.
Available on eu.fishersci.com
www.eu.fishersci.com
1
www.fishersci.ie
13
SAMPLE PREPARATION
CENTRIFUGATION
CENTRIFUGAL
CONCENTRATORS,
VACUUM, SPEEDVAC™ KITS
MICROCENTRIFUGES,
MICRO 17/17R
• Capacity: 48mL (24 x 15/2mL tubes)
• Maximum speed/RCF: 13,300rpm/17,000xg
• Adjustable 99 minute timer and quick-spin feature for short
runs
• Supplied with rotor and biocontainment lid
• Capacity: 48mL (24 x 15/2mL tubes)
• Maximum speed/RCF: 13,300rpm/17,000xg
• Adjustable 99 minute timer and quick-spin feature for short
runs
• Supplied with rotor and biocontainment lid
Cat No.
Description
Pack qty
11516873
Microcentrifuge Micro 17, ventilated
1
11526873
Microcentrifuge Micro 17R, refrigerated
1
Cat No.
Description
12642735
SpeedVac concentrator SPD111V Package 1, includes : SpeedVac
concentrator basic model biology; universal vacuum system (oil free
pump and -50°C refrigerated vapour trap; glass condensation flask; 40
1
x 1.5mL rotor; tubing package (12 foot length of thick walled tubing,
cutter, clamps, fittings, manual bleed valve, instructions); CryoCool™ heat
transfer fluid (1L)
11353553
SpeedVac concentrator SPD111V Package 2, includes: SpeedVac
concentrator, basic molecular biology; -105°C, ultra-low temperature
refrigerated vapour trap; high vacuum pump; 40 x 1.5mL rotor;
universal tubing package; digital vacuum gauge; chemical trap kit for use 1
with disposable cartridge; disposable cartridge with colour indicator for
trapping acids and water vapour; glass condensation flask; vacuum pump
lubricating oil, CryoCool heat transfer fluid (1L)
12692755
SpeedVac concentrator SPD121P Package 1, includes: SpeedVac
concentrator; -105°C, ultra-low temperature refrigerated vapour trap;
oil free ETFE/PFA four-headed pump; 64 x 1.5mL rotor; digital vacuum
gauge; chemical trap kit for use with disposable cartridge; disposable
1
cartridge with colour indicator for trapping acids and water vapour; tubing
and fitting (4 foot length of clear, thick-walled vacuum tubing, two clamps,
cutter); glass condensation flask; CryoCool heat transfer fluid (1L)
12622765
SpeedVac concentrator SPD131DDA Package 1, includes: SpeedVac
concentrator, acid resistant; -105°C, ultra-low temperature refrigerated
vapour trap; oil free ETFE/PFA four-headed pump; rotor for 40 x 12mm
1
x 75mm glass tubes; glass condensation flask; CryoCool heat transfer
fluid (1L); tubing and fitting kit (4 foot length of clear, thick-walled vacuum
tubing, two clamps, cutter)
12602765
SpeedVac concentrator SPD131DDA Package 2, includes: SpeedVac
concentrator, basic molecular biology; -5°C refrigerated vapour trap;
vacuum pump; rotor for 15 x 15mm x 45mm 1 dram vials; chemical
trap kit for use with disposable cartridge; disposable cartridge with colour
indicator for trapping acids and water vapour; tubing and fitting kit (4
foot length of clear, thick-walled vacuum tubing, two clamps, cutter);
glass condensation flask; CryoCool heat transfer fluid (1L); vacuum pump
lubricating oil
TUBE, MICROTUBE
• Use between -80°C to 120°C
• Flat cap
• Withstand speeds up to 26,000xg
• DNase, RNase free
• Polypropylene
• Graduation molded
• Autoclavable
• Non-sterile
Cat No.
Capacity, mL
Colour
Diam. x height, mm
Pack qty
11926955
1,5
Natural
11 x 40
500
Pack qty
TUBES, CENTRIFUGE,
THERMO SCIENTIFIC NUNC™
EZ FLIP™ CAP
• Integrated leakproof cap prevents cross contamination and
lost closures
• Patented hinged-cap system
• Ergonomic design for one handed opening and closing
• Clarified polypropylene construction provides chemical
resistance and high RCF tolerance
• White writing area and flat caps for sample identification
• Printed graduations
• Standard dimensions compatible with centrifuge rotors
• 15mL and 50mL versions are available
1
CONICAL CENTRIFUGE
TUBES
• 15mL and 50mL Capacity
• Available in PP and PET
• Black graduation marks
• White marking area
• Flat cap and plug seal cap
• Gamma irradiation sterilisation
• Bulk or rack version
Cap flat
top
Cap plug
seal
Capacity,
mL
Max.
rcf,
xg
Material
Dia. x H,
mm
Sterile
Inner
pack
qty
Pack
qty
Cat No.
Description
RCF, xg max
Inner pack qty
Pack qty
Bulk
10512802
15mL bulk
8,500
50
500
11755075 11765075
15
6,000 PP
17 x 119
Yes
25
500
10777414
15mL racked
8,500
50
500
11512303 11809650
50
9,400 PP
29 x 114
Yes
25
500
10048631
50mL bulk
9,500
25
500
-
11829650
50
9,400 PP
29 x 114
No
25
500
10571663
50mL racked
9,500
25
500
Rack
-
14
11879640
15
1,800 PET
17 x 119
Yes
50
500
11849650 11889640
15
6,000 PP
17 x 119
Yes
50
500
-
11839650
50
1,800 PET
29 x 114
Yes
50
500
11819650 11899640
50
9,400 PP
29 x 114
Yes
50
500
www.fishersci.co.uk
HOMOGENISATION
STIRRERS, OVERHEAD,
DIGITAL
HOMOGENISER
• Built for high volume/high viscosity lab or pilot plant
applications
• High performance brushless DC motors
• Overload protection
• Hollow through shaft for easy impeller adjustment
• Clamp, stand and mixing impellers available separately
• Safety approved to EN 61326 CE / IEC 61010-1 and 610102-51,
EMC EN 50081-1, EN 50082-1 ROHS, WEEE
• Three year warranty
• Hand-held or bench top operation
• Ideal for use with a wide range of hard or soft samples
Cat No.
Description
Pack qty
15183007
Model 500, 11,000 to 30,000rpm
1
Cat No.
Description
Pack qty
15123017
Base stand for model 500 and 1,000
1
15203807
Overhead stirrer, 40 to 2,000rpm, 25L
1
15293797
Overhead stirrer, high torque, 20 to 3,000rpm, 60L
1
POLYMIX HAMMER AND
CUTTING MILLS
CUTTING MILLS
MICROTRON™
• Cutting mill
Equipped with a 3-blade rotor for fibrous materials: wood, leaf,
paper, glass fibre, textile, leather, plastic, etc.
• Hammer mill
Equipped with a 3-hammer rotor for brittle materials: minerals,
cereal, coffee, tablets...
• Interchangeable rotor
Increased flexibility at low cost.
• Safety
LCD screen with display of messages and the rotation speed.
Automatic motor shutdown when opening the grinding chamber.
Auto standby.
Aluminium frame with carry handle.
Stainless steel lining and grinding chamber with rounded CN29
output for sample recovery in a tube or laboratory glassware.
Manual adjustment of the feed rate of the grinding chamber.
Delivered with 1mm sieve, 12 collecting tubes on stand, cleaning
kit and rotor change.
• Opening: 20mm x 20mm
• Speed: 50 to 6,000 r/min
• W x D x H: 250 x 330 x 480mm
• Power: 230 V - 50 Hz
• Absorbed power: 1,000 W
• Max. sound level: 70 dB
For mixing, dispersing, homogenising, emulsifying and size
reduction of cuttable materials
• Starts only when safety hut or lid are well attached
• 550W or 800W motor with speed regulation from 500rpm up to
17,000rpm
• Blades made with stainless cutlery steel
• Glass attachments with volumes of 125mL, 250mL, 0.5L and 1L
• Stainless steel attachments with volumes of 2L and 4L
Cat No.
Description
Pack qty
11900359
Polymix cutting mill
1
11910359
Polymix hammer mill
1
Cat No.
Description
Pack qty
11940049
Microtron™ MB550 cutting mill
1
11979058
Microtron™ MB800 cutting mill
1
STIRRER, MAGNETIC,
ULTRAFLAT, ESP
STIRRERS, MAGNETIC,
ISOTEMP RT, D50/6
Ultraflat magnetic stirrer with no moving mechanical
components.
• Gentle start-up
• 1,100rpm
• 5L stirring volume (H2O)
• Ergonomic design
• High resistance to chemical reagents
• Low profile; light weight design with small foot print
• Strong magnetic coupling to ensure consistent stirring during
experimental procedures
• Speed control : 150 to 2,500rpm
• Two non-slip silicone plate covers provided with all unit one
white-one black
Cat No.
Description
Pack qty
Cat No.
Diameter, mm
Stirring capacity, L
Pack qty
11791174
ESP magnetic stirrer, 100-240V, 50/60Hz
1
15336607
120
2
1
15346607
170
4
1
15356607
220
5
1
www.fishersci.ie
15
SAMPLE PREPARATION
HOMOGENISATION
VORTEX MIXER
SHAKER, ROCKER, DIGITAL
• Speed: 0 to 3,000rpm
• Touch or continuous operation
• Technopolymer body for higher chemical resistance
• Orbit diameter: 4.5mm
• Dimensions, internal [w x d x h], mm: 153 x 170 x 125
• Compact design ideal for incubators, chambers and
refrigerators
• Digital speed control 5 to 100rpm
• Easily adjustable tilt angle 5° to 13°
• Includes dimpled mat + 2 fixing bands
Cat No.
Description
Pack qty
Cat No.
Description
Pack qty
13214789
Vortex mixer, speed 0 to 3,000rpm
1
15218844
Rocker, digital
1
STIRRING HOTPLATE
ISOTEMP™
SHAKER, ROTATOR, WAVING
• Isotemp™ stirrers are designed to provide precise stirring
control for most routine protocols
• Features slow speed stirring, consistent speed control, and
strong magnetic coupling
• Stir bar is included with stirrer
• Three years warranty
• Certifications: CE
• RoHS compliant
• Splash guard protection shield 18cm x 18cm accessory also
available
• Surface type: ceramic • Plate dimensions, mm: 180 x 180
• Compact design ideal for incubators, chambers and
refrigerators
• Digital speed control 8 to 100rpm
• PID control
• Easily adjustable tilt angle 0° to 13°
• Includes dimpled mat + 2 fixing bands
Cat No.
Description
Pack qty
15238844
Rotator, waving
1
Cat No.
Description
15353528
Stirring Hotplate Isotemp Hotplate, digital, Isotemp™ Advanced EU plug
15363528
Stirring Hotplate Isotemp Hotplate, digital, Isotemp™ Advanced UK plug
15333518
Stirring Hotplate Isotemp Stirrer, magnetic, Isotemp™ EU plug
15343518
Stirring Hotplate Isotemp Stirrer, magnetic, Isotemp™ UK plug
15393528
Stirring Hotplate Isotemp Hotplate stirrer, magnetic, Isotemp™ Advanced
EU plug
15303538
Stirring Hotplate Isotemp Hotplate stirrer, magnetic, Isotemp™ Advanced
UK plug
HOTPLATES,
ISOTEMP RT DIGITAL 230V,
50/60HZ
• Low profile design
• Digital control
• You can easily set your own temperature limit at any value
between 0°C and 350°C
• Overheat prevention circuit turns off the heater if the hot plate
temp reaches 450°C
• Hot top warning indicator
• Keypad lock button
• Three user selectable temperature modes: Optimal, Fast or
Slow mode
• Two user selective timers: showing actual and set value
simultaneously
• Separate operation Run/Stop button
Cat No.
Description
Pack qty
15306607
RT digital hotplate
1
15316607
RT hotplate stirrer
1
15326607
RT advanced hotplate stirrer
1
16
Pack qty
HOTPLATE STIRRER RT2
Each unit is equipped with hot top warning and built-in
temperature shut-off. Overheat prevention circuit turns off the
heater if the top plate temperature reaches 450°C.
• Hot top warning indicator
• Adjustable temperature limit: 50° to 350°C
Cat No.
Description
Pack qty
15248824
Hotplate stirrer, RT2, 140mm ceramic coated aluminium plate
1
www.fishersci.co.uk
HOMOGENISATION
CIMAREC+™ STIRRER
SERIES
SUPERNUOVA+™ HOTPLATE
SERIES
Thermo Scientific™ Cimarec+™ series digital stirrers offer
precise stirring control for your routine protocols. The Cimarec+
Series are available in three sizes, providing flexibility from
microscale chemistries to production operations.
• Speed: 50 to 1500rpm
• Material: Ceramic
• Easy-to-read LED display for stirring
• Raised display design protects electronics from spills
• Optional splash guard protection shield
Thermo Scientific™ SuperNuova+™ hotplate series provides
reliable performance, dependable safety and simple operation.
Units are available in two sizes, including a multi-position
model with optimised controls and settings for applications that
demand advanced precision.
• Easy-to-read LED display for heating and stirring
• Raised display design protects electronics from spills
• Ability to set programs (ramp/dwell) as well as save settings
• Top plate material: Ceramic
• Stir Trac features innovative engineering for slow-speed
stirring, consistent speed control, and stronger magnetic
coupling
• Hot top warning system protects from accidental burns with
prominent display when heating surface is above 50°C
Cat No.
Top plate surface, mm
Dimensions (L x W x H), mm
Pack qty
15463600
108 x 108
254 x 127 x 91
1
Cat No.
Temperature max Top plate surface, mm
Dimensions
(L x W x H), mm
Pack qty
15463610
450°C
330 x 208 x 97
1
184 x 184
FILTRATION
Distributor
GE Healthcare
FILTER PAPERS, GLASS
MICROFIBRE, GF/F, 0.7µm
FILTER PAPERS, GLASS
MICROFIBRE, MF 300
• Used to filter finely precipitated proteins
• An ultrafine filter capable of retaining particles as small as
0.7µm in liquids, but unlike membrane filters it has a rapid flow
rate and an extremely high loading capacity
• It can be used in conjunction with GF/D range (please visit our
website) for the successful clarification of ‘extremely difficult’
biochemical solutions and fluids
• High loading capacity
• Made from 100% borosilicate glass
• Compatible with many solvents and reagents
• Contain no binder
• Not affected by humidity
• Suitable for use at and up to 500°C
This filter is suitable for general filtration of solvents, analysis of
HPLC samples, filtration of proteins and biochemical solutions
plus other applications where fine
particulates are involved
Cat No.
Diameter, mm
Pack qty
11350604
25
100
11370604
47
100
FILTER HOLDER, MEMBRANE
HOLDER, GLASS, 47mm,
VACUUM
Cat No.
Diameter, mm
Retention, µm
Pack qty
11764083
47
0.7
100
11704083
47
1.2
100
11764093
90
0.7
25
11714083
90
1.2
100
For vacuum filtration of aqueous, organic or corrosive liquids for
particulate contamination analysis.
Also recommended for HPLC solvent filtration. Vacuum
connection to integral base and flask cap is above filtrate exit
level, avoiding risk of drawing filtrate droplets into vacuum
tubing. Laminated filters will not seal correctly in this holder.
Warning: Not recommended for use with flammable liquids.
Cat No.
Description
Pack
qty
10658451
Filter holder vacuum with fritted glass support glass funnel 300mL flask 1L
1
www.fishersci.ie
17
SAMPLE PREPARATION
FILTRATION
LABORATORY VACUUM
PUMP
PUMP, VACUUM AND
PRESSURE, OIL FREE
• Laboratory vacuum pump, standard, membrane, aluminium/
PTFE
• 15L/min, down to 100mbar
• Filtration of aqueous or non-aggressive solvent solution
• Vacuum oven, degassing, gas transfer
• Oil free piston pump designed for general duty laboratory
applications requiring only a rough vacuum and moderate
pressure
• Tough, lightweight, plastic housing with integral carrying
handle
• Water jet or aspirator replacement for general duties
• Lightweight, compact, portable, standard-duty operation
• Applications include vacuum filtration, aeration, aspiration,
gas sampling
• Not recommended for organic, basic and acidic vapours
• Dimensions (w x d x h), mm: 114 x 194 x 191
Cat No.
Description
Pack qty
12695326
Laboratory vacuum pump
1
Cat No.
Description
Pack qty
11533485
Pump, vacuum and pressure, oil free
1
FILTER UNITS, SYRINGE,
NON-STERILE
LABORATORY VACUUM
PUMP
• Oil free pump for degassing, filtration, desiccation, aspiration
and tissue culture.
• Compact
• Economical
• Aqueous and chemical PTFE versions
• High flow versions for viscous and large well systems
• Tissue culture versions accessorised ready for use
• Pressure, mbar: 133
• Flow rate, L/min: 18
• Dimensions (L x W x H), mm: 194 x 114 x 191
Cat No.
Description
Pack qty
10191942
Laboratory vacuum pump
1
• Perfect for daily routine analysis
• Nylon membrane for aggressive aqueous solutions,
hydrophobic PTFE for aqueous or organic solutions
Cat No.
OD, mm
Pore size, µm
Membrane
Pack qty
15121499
25
0.2
Nylon
50
15131499
25
0.45
Nylon
50
15181489
25
0.2
PTFE Hydrophobic
50
15101499
25
0.45
PTFE Hydrophobic
50
15141499
25
0.2
PTFE Hydrophilic
50
15151499
25
0.45
PTFE Hydrophilic
50
15161499
13
0.2
PTFE Hydrophilic
100
15171499
13
0.45
PTFE Hydrophilic
100
15181499
33
0.2
PES
50
15191499
33
0.45
PVDF
50
15206869
33
0.2
PES
50
15216869
33
0.45
PES
50
FILTER UNITS, SYRINGE, GD/X™ AND GD/XP™
Distributor
GE Healthcare
Enable filtration of hard to filter or viscous samples. Applications include: sample preparation, dissolution testing, content uniformity, concentration analysis.
GD/X™ syringe filters, with unique prefiltration stack of Whatman™ GMF 150 (graded density) and GF/F glass microfibre filters, are ideal for use with sample volumes of
up to 10mL (13mm filter) or greater than 10mL (25mm filter) (11314794 and 11334794 contain GMF150 but not GF/F prefilter). GD/XP™ syringe filters are ideal for use with
samples that require ion analysis, as levels of ion extractables are minimised, they contain a prefilter stack of 20µm and 5µm polypropylene filters
Model No GD/X™ GD/XP™
Diameter, mm 13 25
2
Effective filtration area, cm 1.3 4.6
Cat No.
Description
Membrane
Pore size, µm
OD, mm
Pack qty
11334764
GD/X™
Nylon
0.2
25
150
10279090
GD/X™
Nylon
0.45
25
150
11394764
GD/X™
PVDF
0.2
25
150
11304774
GD/X™
PVDF
0.45
25
150
11354774
GD/X™
PTFE
0.45
25
150
11344774
GD/X™
PTFE
0.2
25
150
11344804
GD/XP™
Nylon
0.45
25
150
11330344
GD/XP™
Nylon
0.45
25
1,500
11354804
GD/XP™
PVDF
0.45
25
150
11370344
GD/XP™
PVDF
0.45
25
1,500
18
www.fishersci.co.uk
HYGIENE, DISINFECTION
AND PROTECTION
INCUBATORS, OVENS
THERMO SCIENTIFIC
HERATHERM COMPACT
MICROBIOLOGICAL
INCUBATORS
THERMO SCIENTIFIC
ENVIRONMENTAL
CHAMBERS
• Ideal for drug stability studies, shelf life testing of packaged
products, controlled temperature storage, insect and large
scale biological research
• 0° to 60°C (32° to 140°F) temperature range that can be set in
0.1°C increments
• Optimum uniformity and a wide temperature range allow for
easy compliance with regulatory requirements
• Rugged construction and durable shelving provide for long life
• Customisable options are available for this series
• Full two year parts and labour warranty
• Shelves, supplied/max: 5/26
• Temperature range: 5° above ambient to 60°C
• Temperature control: ±0.1°C
• Temperature uniformity: ±0.3° @ 25° to 37°C
• Also available 821L model: 15563771 without refrigeration and
humidity control
• Minimal footprint for space restricted lab areas
• Temperatures at or below ambient
• High temperature accuracy
• Internal light facilitates sample observation
• Convection technology: mechanical convection
• Temperature range °C 17 - 40
• Spatial temperature deviation at 37 °C: ± 1.2 °C
• Temperature deviation over time at 37 °C: ± 0.2 °C
• Footprint m2: 0.12
• Dimensions
- Interior, mm (W x H x D): 180 x 310 x 290
- Exterior, mm (W x H x D): 260 x 415 x 4,705
Number of shelves supplied/max: 2/3
Energy consumption at 37 °C: 14W
Cat No.
Capacity, L
10699640
18
Cat No.
Capacity, L
Dimensions interior,
mm (W x H x D)
Dimensions exterior, Shelves, supplied/
mm (W x H x D)
max
15480430
311
686 x 787 x 609
813 x 965 x 1,308
6/19
15470430
821
686 x 787 x 1,524
838 x 965 x 2,032
5/26
THERMO SCIENTIFIC HERATHERM MICROBIOLOGICAL INCUBATORS,
GENERAL PROTOCOL
Safe
• Safe view of samples through internal glass door, without impact on temperature
• Safe conditions with superior temperature uniformity
• Safe containment with automatic overtemperature alarm
• Alarm in case of temperature deviations
Easy
• Easy temperature setting with intuitive user interface
• Easy to remove ‘One Click‘ shelf system
• Easy to clean interior with rounded corners
• Easy to read large display
Efficient
• Efficient small footprint to optimise bench top space
• Conveniently stackable without the need for tools or stacking kits
• Efficient utilisation of interior with flexible shelf system
• Incubators are supplied with two shelves
10529070
10839810
10744262
12625306
12635306
Model No
IGS60
IGS100
IGS180
IGS400
IGS750
Capacity, L
75
117
194
400
750
Power rating, W
300
520
710
1200
1500
Current, A
3.7
2.3
3.1
5
6.5
Dimensions, external [w x d x h], mm
530 x 565 x 720
640 x 565 x 820
640 x 738 x 920
778 x 1,545 x 770
1,261 x 1,545 x 770
Dimensions, internal [w x d x h], mm
354 x 414 x 508
464 x 414 x 608
464 x 589 x 708
544 x 1,305 x 569
1,004 x 1,307 x 569
Number of shelves, supplied/max
2/13
2/16
2/19
2/39
2/39
Mass, kg
40
51
65
145
201
THERMO SCIENTIFIC HERAEUS™ VACUUM OVENS
• Range of jacket heated vacuum ovens with stainless steel chambers
• Kelvitron electronic temperature controller with digital display
• DN25KF vacuum connection on rear of oven
• Inert gas connection
• Temperature max: 200°C
• Spatial temperature deviation at 200°C: ±4°C
• Weight: 82kg
Cat No.
Capacity, L
Dimensions interior, mm (W x H x D)
Dimensions exterior, mm (W x H x D)
Shelves
10019490
53
415 x 371 x 345
744 x 570 x 576
2
www.fishersci.ie
19
HYGIENE, DISINFECTION
AND PROTECTION
Cat No.
SAFETY PROTECTION
GLOVES, NITRILE, PPE,
CATEGORY III
KIMTECH SCIENCE™
COMFORT NITRILE
GLOVES, NITRILE,
DISPOSABLE, POWDER
FREE, KIMTECH SCIENCE™
PURPLE NITRILE™
Combines high comfort, quality and cleanliness for protection in
low risk research applications.
• PPE Category III
• A brand-new nitrile formulation engineered for comfort
• 150 gloves per standard sized box
• Better chemical protection than latex, tested on the 6 most
common chemicals in the lab
• Non-contaminated gloves can be recycled through our
RightCycle Programme
Excellent choice for higher risk applications in life sciences and
non-sterile pharmaceutical manufacturing. Best combination of
protection, cleanliness and quality. Best chemical protection in
the KIMTECH SCIENCE™ range, tested against over 50 chemicals
and 20 cytotoxic drugs. Strength, quality and cleanliness tracked
by certificate of analysis. PPE cat III compliant, AQL 0.65, EN
374-1 and -2, ISO 16604, food contact approved.
Size
Pack qty
15302256
XS
150
15312256
S
150
15322256
M
150
15332256
L
150
15362206
XL
150
Cat No.
Size
Pack qty
10737655
XS
100
10248264
S
100
11889610
M
100
11899610
L
100
11809620
XL
90
GLOVES, CLEANROOM,
NITRILE, STERILE
PPE CATEGORY III, KIMTECH
PURE™ G3 WHITE
GLOVES, DISPOSABLE,
POWDER FREE KIMTECH
SCIENCE™ GREEN NITRILE™
PPE, CATEGORY III
• Certified PPE Category III
• Extra dexterity and comfort
• Ideal for EU GMP ISO Class 5 Grade A cleanrooms
• Sterility assurance level 10-6
• Great value nitrile glove with the fit and feel of latex
• Comfortable, durable and sustainable
• 250 gloves per standard sized box reduces waste, space and
environmental impact
• Tested against over 30 chemicals. PPE Category III compliant,
AQL 0.65, EN374-1 and -2, ISO 16604, food contact approved
Cat No.
Size
Pack qty
11718532
6
100
Cat No.
Size
Pack qty
11728532
6.5
100
11719295
XS
250
11738532
7
100
11729295
S
250
11748532
7.5
100
11739295
M
250
11758532
8
100
11749295
L
250
11768532
8.5
100
11759295
XL
225
11778532
9
100
LABORATORY COATS, SINGLE
USE, KIMTECH SCIENCE™ A7
P+ CATEGORY III
OVERSHOES, KIMTECH PURE
A8
• Ideal for laboratory environments with low risk of exposure to
chemicals and a basic need for contamination control
• Extra protection: elastic wrists and thumb loop for full wrist
coverage; extra length arms to help to keep the glove in place
• Offers Type 6 (PB) limited chemical protection, protecting
the user against liquid chemicals (light splashes, sprays and
aerosols)
• Ideal for laboratories and ISO7 cleanroom environment
• Made from highly durable waterproof material offering 4 times
more grip than conventional anti-slip shoe covers
• Seamless bottom, elastic toe and heel, double-bagged, not
made with silicone or latex
• Available in three sizes for a perfect fit. White.
Cat No.
Size
Pack qty
Cat No.
Description
Pack qty
13529020
S
15
15319470
Shoe Covers A8 Anti-slip ISO 7 Size 38-42
300
13549020
M
15
15339470
Shoe Covers A8 Anti-slip ISO 7 Size 41-45
300
15359470
Shoe Covers A8 Anti-slip ISO 7 Size 44-47
300
13559020
L
15
13569020
XL
15
13589020
XXL
15
20
www.fishersci.co.uk
SAFETY PROTECTION
GLOVES, NITRILE,
DISPOSABLE, PURPLE, PPE
CATEGORY III
DISPOSABLE HIGH-TACK
SHOE COVERS
• Ergonomically designed and 100% nitrile
• Latex and protein free with non-detectable residual
accelerators
• Textured fingertips
• Powder free
• Length, mm: 250
• High-Tack, disposable shoe covers provide superior protection
• Single-use
• Polyurethane
• Latex-free
• High-Tack sole
Cat No.
Size
Pack qty
11502723
2XS
100
11512723
XS
100
11522723
S
100
10223882
M
100
11542723
L
100
11552723
XL
100
Cat No.
Description
Colour
Size,mm
Pack qty
15421952
Shoe cover, High-Tack
Blue
Universal
300
15431952
Shoe cover, High-Tack
Blue
X-Large
300
DISPOSABLE
POLYETHYLENE SHOE
COVERS
DISPOSABLE SHOE COVERS
• Spunbond polypropylene shoe covers protect against dirt,
grime and certain dry particulates
• Single-use
• Polypropylene
• Latex-free
• With or without anti-skid sole
Cat No.
Description
Colour
Size,mm
Pack qty
15481942
Shoe cover with anti-skid
Blue
X-Large
300
15491942
Shoe cover with anti-skid
Blue
Universal
300
15401952
Shoe cover without anti-skid Blue
X-Large
300
15411952
Shoe cover without anti-skid Blue
Universal
300
• Single use, disposable covers provide convenient protection
• Polyethylene
• Latex-free
Cat No.
Description
Colour
Size,mm
Pack qty
15451952
Shoe cover, polyethylene
Blue
X-Large
300
15461952
Shoe cover, polyethylene
Blue
Universal
300
DISPOSABLE
POLYPROPYLENE LAB
COATS
DISPOSABLE ANTI-STATIC
SHOE COVERS
• Conductive carbon strip helps eliminate static buildup
• Single-use
• Elastic ankle
• 42gms polypropylene
• Latex-free
• Latex-free spunbond polypropylene construction lab wear
• Elastic cuffs hold sleeves in place
• Five snaps for a secure closure
• Standard collar
• No pockets
• Fabric weight: 50g/m2
Cat No.
Description
Colour
Size,mm
Pack qty
15441952
Shoe cover, with conductive
carbon strip
Blue
Universal
300
Cat No.
Colour
Size
Pack qty
15431922
White
S
25
15441922
White
M
25
15451922
White
L
25
15461922
White
XL
25
15471922
White
2XL
25
15481922
White
3XL
25
www.fishersci.ie
21
HYGIENE, DISINFECTION
AND PROTECTION
FILTRATION
RESPIRATORS, 9300+ SERIES
AURA™
Covers a range of applications requiring FFP1, FFP2 and FFP3
protection.
• Unique three panel design for greater comfort and easy
communication
• Soft cover web on inner panel ensures greater comfort
• Centrally positioned cool flow valve reduces heat build up and
makes breathing easier and cooler
• Evenly tensioned headbands to relieve strap pressure
• Lightweight and foldable
• Individually packed to avoid contamination during storage
Cat No.
Description
Pack qty
11717574
9310+ premium dust respirator, provides protection against fine dusts.
Individually packed, EN 149:2001 FFP1. Particulates Assigned Protection
Factor 4 (NPF 4)
20
12672545
9312+ premium valved dust respirator, provides protection against fine
dusts. Individually packed, EN 149:2001 FFP1. Particulates Assigned
Protection Factor: 4 (NPF 4)
10
10583051
9320 premium dust/mist respirator, provides protection against fine
dusts and water based mists. Individually packed, EN 149:2001 FFP2.
Particulates Assigned Protection Factor: 10 (NPF 12)
20
10116544
9322+ premium valved dust/mist respirator, provides protection against
fine dusts and water based mists. Individually packed, EN 149:2001
FFP2. Particulates Assigned Protection Factor: 10 (NPF 12)
10
10718615
9332+ premium valved dust/mist/metal fumes respirator, provides
protection against fine dusts, water based mists and metal fumes.
Individually packed, EN 149:2001 FFP3 Particulates Assigned Protection
Factor: 20 (NPF 50)
10
The 3M™ Respirators 8000 Series provide lightweight,
comfortable and effective respiratory protection against dust and
mist. The convex shape, twin strap design, nose foam and nose
clip ensure comfortable wear over a range of face sizes. The
collapse resistant shell and proprietary 3M™ respirators offer
durable, comfortable protection particularly in hot and humid
conditions.
Cat No.
Size
11703363
3M™ 8710 cup-shaped unvalved dust/mist respirator - small pack FFP1 20
Pack qty
11713363
3M™ 8810 Cup-Shaped Unvalved Dust/Mist Respirator - small pack
FFP2
20
LABORATORY COATS,
UNISEX
• Washable at 85°C
• Features include, two lower patch pockets, breast pocket with
integral pen pocket, concealed stud fastened front, single rear
vent for ease of movement
Cat No.
Size
Pack qty
11558102
S
1
11568102
M
1
11578102
L
1
11588102
XL
1
11598102
XXL
1
SPECTACLES, SAFETY, 3M™
SECUREFIT™ 200 SERIES
3M SECURE FIT SF400
SERIES SAFETY SPECTACLES
• Design provides excellent coverage and good field of vision
• Offers excellent protection against ultraviolet (UV) radiation
• Lightweight and comfortable design (18g)
• Good impact resistance with anti-scratch coating for improved
durability
• Special anti-fog coating which reduces fogging and ensures
clearer vision
• 3M Pressure Diffusion Technology allows temples to naturally
adjust to individual head sizes
• Self adjusting feature eliminates need to stock multiple frame
sizes at worksites
• Secure, snug fit keeps eyewear in place without slippage even
when the person is in motion
• Combines well with 3M™ 9300 Series respirators
• Optical class 1 lens suitable for prolonged use
• Design provides excellent coverage and field of vision
• Protection against UV radiation
• Lightweight design (19g)
• Adjustable nose pads for secure and personalised fit
• Soft-touch dual moulded temples for increased comfort and
grip
Cat No.
Size
Pack qty
15282025
Safety spectacles, SecureFit™, clear, anti-scratch/anti-fog
1
22
RESPIRATORS, 8000 SERIES
(CLASSIC)
Cat No.
Description
15371994
3M SecureFit 400 Protective Eyewear, SF401AF-EU, Clear PC
15391994
3M SecureFit 400 Protective Eyewear, SF402AF-EU, Grey PC
15302004
3M SecureFit 400 Protective Eyewear, SF403AF-EU, Amber PC
15322004
3M SecureFit 400 Protective Eyewear, SF408AS-EU, Mirror blue PC
15312004
3M SecureFit 400 Protective Eyewear, SF410AS-EU, Mirror I/O PC
www.fishersci.co.uk
ESSENTIALS
ARCTIC A28 REFRIGERATED
CIRCULATORS
THERMO SCIENTIFIC™
HAAKE VISCOTESTER™ 550
By its design, the Thermo Scientific HAAKE Viscotester 550
is a Searle viscometer. A rotational speed is preset and the
flow resistance of the sample is measured, in other words,
the torque required to maintain the set speed is proportional
to the viscosity. From the torque required, the set speed
and the geometry factors of the applied sensor, all final
information on the viscosity, shear stress and the shear
rate is calculated. The results are displayed digitally and
can be printed simultaneously
• Speed range: 0.5 rpm to 800 rpm
• Uncertainty: +/-0.1%
• CD Mode: 0.0125 rpm
• Torque Range:
– up to 400 rpm: 0.1 mNm to 30 mNm
– up to 800 rpm: 0.1 mNm to 20 mNm
• Uncertainty: +/-0.5% FSD
• Temp. range: -50 °C to +250 °C depending on measuring
system
• Interface: RS232C
Cat No.
Description
10474963
Thermo Scientific Haake Viscotester 550
The Thermo Scientific™ refrigerated bath circulator provides
efficient cooling for open and closed applications, with
temperatures ranging from −40° to +200°C and maximum bath
volume of 12 litres. Powerful bath circulator with a stainlesssteel reservoir that can be configured with six controller options
allowing you the flexibility to choose the right model for your
application
Cat No.
Cooling
capacity, W
Capacity,
L
Temperature
range
Pressure
Temperature
stability
10679979
300
10
-28°C to 100°C
17L/min,
300mbar
±0.02°C
11630931
800
12
-28°C to 150°C
20L/min,
475mbar
±0.01°C
Whatever your application
Fisherbrand has a solution
for you
BATH, ISOTEMP
Low-profile model enables easy bath access when lab counter
height presents a challenge. Seamless stainless-steel tanks
guarantee durability and easy cleaning. Robust refrigeration
system ensures that samples and applications can be cooled
quickly. Fine-tuned refrigeration metering allows for excellent
temperature stability at all times.
• The robust refrigeration system ensures that your samples and
applications can be cooled quickly
• Stainless steel tanks for durability and ease of cleaning
• Fine tuned refrigeration metering for excellent temperature
stability
• Inlet/outlet connections for external circulation included
• Work area cover included
• Bath drains are located on the front of the unit
• Capacity: 1.2kW
• Weight: 35.8kg
• Pressure: 17L/min, 310mbar
• Pump type: Force
Cat No.
Cooling
capacity, W
Capacity, L
Temperature range
Temperature stability
11306651
500
6.8 to 8.6
-28°C to 150°C
±0.05°C
Centrifugation
Chromatography
Cryogenics
Electrophoresis
Lab storage
Liquid handling
Microscopy
Mixing
pH and electrochemistry
Safety
Temperature maintenance
For the full range visit
www.eu.fishersci.com/go/fisherbrand
www.fishersci.ie
23
ESSENTIALS
ARCTIC REFRIGERATED
CIRCULATORS
WATER BATHS
• Temperature range from ambient to 99.9°C
• Temperature stability ±0.1°C and temperature uniformity
±0.05°C at 37°C
• Bright LCD controller with icon driven menu
• Stores three preset temperatures
• Automatic timer with option to set time to start procedure
• Global voltage - one part number works anywhere in the world
• Audible alarms help protect your work
• General purpose water baths include a polycarbonate gabled
lid
• Shaking water baths with reciprocal oscillation from 30 to 200
oscillations per minute, include stainless steel gable cover,
shaking tray
The Thermo Scientific™ refrigerated bath features a large
work area, enabling high throughput and workflow efficiency,
with temperatures ranging from −5° to +100°C and maximum
bath volume of 30 litres. Configure your refrigerated bath with
a Thermo Scientific STANDARD or ADVANCED controller that
meets your specific application needs.
Cat No.
Cooling
capacity, W
Capacity,
L
Temperature
range
Pressure
Temperature
stability
10597485
200
12 to 20
-5°C to 100°C
17L/min.
300mbar
±0.02°C
10048434
250
17 to 20
-10°C to 150°C
17L/min.
300mbar
±0.02°C
Cat No.
Description
15385877
General purpose water bath 10L
15305887
General purpose water bath 28L
15325887
Shaking water bath, 15L
15335887
Shaking water bath, 27L
BATHS, CIRCULATORS,
HEAT-REFRIGERATED,
CLOSED SYSTEM
• Full range heating and cooling from -10°C to 80°C
• Small reservoir ensures fast temperature response time
• Small footprint
• Quiet operation
• Intuitive user interface allows user to choose between five
temperature set-points
• Temperature range: -10 to 80°C
• Capacity: 2.8L
• Stability: ±0.1°C
• Heater capacity: 2000W
• Dimensions [w x d x h], mm: 227 x 436 x 619
• Mass: 29.9kg
UBBELOHDE VISCOMETERS
(ASTM)
• In accordance with ISO 3105, ASTM D 2515, ASTM D 446
• Filling quantity: 15 to 20 ml
Cat No.
Viscosity, mm2/s
10508811
60-300
10365051
0.35-1
10400883
0.6-3
Cat No.
Pump pressure, mbar
Pump flow, max., L/min Cooling capacity, W (at 20°C)
12028173
2-10
12019907
300
17
250
10018570
200-1,000
11336661
800
21
500
10598801
600-3,000
10325151
2,000-10,000
10490873
6,000-30,000
RECIRCULATING CHILLERS
ISOTEMP
• Compact line of refrigerated recirculating chillers with cooling
capacity of 700W
• Ideal for laboratory applications that require higher cooling
and pumping capacities.
• Full range of heating and cooling from -10°C to +30°C
• Intuitive digital controller for ease of use
• Customer controlled high and low temperature alarm limits
• Small footprint and quiet operation
• Stability ±0.1°C (models I and II), ±0.5°C (model III)
• Three pump options for a variety of application requirements
ion
ology
Inoculat
Microbi
Surface
Sample
g
Samplin
brand
• Fisher
r
• Greine
n
• Sterili
Sterilin
Scientific
• Thermo
g
t Samplin
Produc
ranch
- Dip slides
system multib
- Filtration
re
- Plastic labwa
- Samplers
- Bottles
tubes
- Centrifuge
Description
11396631
Isotemp I Chiller PD-1 Pump, 230V/50Hz, Fisherbrand
11326641
Isotemp II Chiller PD-2 Pump, 230V/50Hz, Fisherbrand
24
Scientific
• Bibby
• Carl Zeiss ific
Scient
• Fisher
brand
• Fisher
gen
• Invitro
pling
ius
• Sartor
o Scientific
• Therm
on
estructi
ation/D
Sterilis
• 3M
• Anios
• Ansell
• Bolle
• Brady
• Du Pont
14
www.fishersci.co.uk
y meters
- Cell densit cell counters
- Colony and coverslips
- Slides and
ers
ts
safety cabine ners
- Class II
waste contai oes
- Clinical
and oversh
- Coveralls s and sanitisers
- Disinfectant
- Facemasks
- Autoclaves
bags
- Autoclave indicators
- Sterilisation
- Gloves
- Glove boxes protection
- Respiratory
labels
- Warning
brand
• Fisher
rly-Clark
• Kimbe
• Labconco
• Microflex
• Plas Lab
o Scientific
• Therm
WORKFLOW
g
Countin
- Air sampl
• BD Difco*
brand
• Fisher
• Brady
g
• Cornin
brand
• Fisher
rr
enics
• Liebhe
ourne Cryog
• Stateb
• Tenak
o Scientific
• Therm
Scientific
• Bibby
brand
• Fisher
• Grant
ert
• Memm
• Plas Labs
o Scientific
• Therm
Air Sam
Safety
Cat No.
jars
- Anaerobic
- Glove boxes ical incubators
- Microbiolog tors
incuba
- Shaker
• Grant
• Kinematica
• Labconco
ert
• Memm
• Plas Lab
• Pyrex
• Retsch
• Sartorius
Sterilin
Scientific
• Thermo
Scientific
• Thermo
ton
Whea
•
ius
• Sartor
o Scientific
• Therm
• Bürkle
lin
• Gosse
• Labconco
readers
- Barcode
systems
- Cryostorage
- Dewars
/ Freezers s (microplates,
- Fridges
consumable
- Storage
boxes)
freezer
cryotubes,
temperature
- Ultra-low
ion
Incubat
• Brady
• Falcon
Scientific
• Fisher
• Fisherbrandcare
• GE Health
• Gosselin
manifolds
ge
ryostora
Storage/C
- Petri dishes rinders
- Stomacher/g
ners
- Water baths universal contai
or
- Apyrogen Sterilin
- Quickstart
e
- Orina tubes and transfer pipett
- Serological
dishes
- Contact
- Dip slides
- Swabs
Water &
burners
spreaders
- Bunsen
loops and
- Inoculating s
- Spiral plater tubes
Sterilin
- Round bottom
Scientific
• Thermo
Scientific
• Thermo
• Falcon
• Fisherbrand
• Gosselin
n
Preparatio
- Balances
- Centrifuges to-use media
ready- Dry and
- Glassware
- Glove boxes r
s
- Label printe and filtration device
- Membranes
• 3M
Scientific
• Fisher
- Antibiotics
- Antisera s
- ATCC strain
- Chemicals
• Acros
• Brady
• Carl Zeiss
d access
in some
• Motic
• Schott
o Scientific
• Therm
• UVP
s
EU countrie
SOLUTIONS
Genomics •
• Bioproduction
Histopathology •
• Microbiology
dies
Stu
Proteomics •
Water
Analysis
teo•mic
Chromatography •Pro
• Physical Analytical Chemistry
Cell biology •
• Safety
taining
ation/S
Identific
brand
• Fisher
o Scientific
• Therm
* restricte
tometers
- Spectropho copes
- Stereomicros
ical stains
- Microbiolog s
- Microscope
- Rapid tests coverslips
- Slides and
brand
• Fisher
b Diagnostics
• Pro-La
o Scientific
• Therm
2016
c Studies
Genomi
15
COLORIMETERS, MELTING POINT APPARATUS
RECIRCULATING CHILLER,
THERMOCHILL II LOW
RANGE WITH MD PUMP,
THERMO SCIENTIFIC
MELTING POINT
APPARATUS, SMP20,
• Temperature range from -10°C to 30°C
• 900W cooling capacity (at set point and ambient temperature
of 20°C)
• Temperature stability ±0.01°C
• Accessible fill port on the top of the chiller for easy filling
• Magnetically driven pump delivers high flow rates at low
pressure making unit ideal for use with laboratory glassware
and other low back-pressure applications
• Pressure gauge located on control panel for easy viewing of
application pressure
• Easy to use, intuitive controller with a plug-and-play design
that allows you to be up and running in minutes
• High and low temperature alarms Cat No.
Description
15271418
Recirculating chiller, ThermoChill II Low Range with MD pump, Thermo Scientific
• Digital selection and display of temperature
• Accuracy 0.1 degree resolution
• Easy to operate with plateau facility
• Ideal for educational use
Pa r t o f B i b b y S c i e n t i f i c
Cat No.
Description
15169722
Melting point apparatus SMP20 with digital 0,1°C resolution
COLORIMETERS
• Integrated RCMSi Technology for Remote Calibration
• Automatic and non-subjective colour measurement
• Consistent data compliant with international standards
• Very rugged, chemically resistant, steel construction
• Easy maintenance with removable sample chamber
• Ability to handle hot samples with high melting points
• Extensive and flexible choice of colour scales
• Remote upgrade facility
• Calculation and description of «off-hue» status
• Supplied with colour control software for data analysis
• Conformance standard, cells and spare bulb included
• Output conforming to GLP including date, time, sample &
user ID
• Accommodates a wide range of sample cells and tubes
• Extensive range of accessories (e.g. thermal printer)
• 153mm (6’’) sample chamber guarantees compliance with
AOCS, ISO and ASTM standards
• Optional integrated heater unit
Cat No.
Description
13585290
Colorimeter oils, fats, waxes and transparent liquids
11370992
Colorimeter oils, chemicals and derivatives
12813223
Colorimeter mineral oils, waxes and petrochemicals
Workflow Solutions
• 10 workflows that cover all applications
• One page dedicated to personal protection because your safety is crucial for us
• A list of key products offered by our main partners
Available on: eu.fishersci.com
www.fishersci.ie
25
ESSENTIALS
COLORIMETERS
BENCHTOP
SPECTROPHOTOMETER FOR
COLOUR MEASUREMENT
NC45
SPECTROCOLORIMETER
LC 100
• For the colour measurement of many types of wet and dry
samples including powders, pastes, gels, plastics and paints
• Non-contact colour measurement allows sample
measurements from a distance, eliminating surface distortion
caused by contact based measurement methods
• Full system LED illumination provides years of reliable
performance
• LED illumination is unaffected by ambient light conditions
• Line of Sight™ visibility to the sample enables technicians to
quickly and easily position the sample for measurement
• Active Visual Targeting(TM) projects a prominent illuminated
target ring onto the sample for precise and accurate
measurements
• Dual measurement spot sizes, 6mm (1/4’’) and 12mm (1/2’’)
which can quickly and easily be switched without the need to
recalibrate
• Integrated gloss sensor provides 60° correlated gloss values
• Versatile design improves measurement capabilities on two
and three dimensional objects
• Flexible quality control software allows user customisation
(provided separately)
• Hand-held imaging spectrocolorimeter
• Combines with unique housing stand to protect sample from
ambient light
• Enables measurement of food, powders, cosmetics & pastes
• Versatile communication of colour measurement
• Single, simple, reliable, integrated tool - no need to connect
to PC
• Readings and comparison charts within seconds
• Information on colour and surface texture effects
• Conformance reports in PDF and Excel formats
• Precise image sampling with 9 band accuracy
Cat No.
Description
15564283
Spectrocolorimeter LC 100
Description
15554283
Spectrophotometer for colour measurement NC45
LC 100 & SV 100
SPECTROCOLORIMETER
PHOTOMETERS MD 600 &
610
• The Lovibond™ LC 100 and SV 100 integrated package
provides a unique solution to users looking to measure food,
powders, cosmetics and pastes.
• The SV 100 holder supports the LC 100 at an ergonomic
viewing angle to enable the measurements in Lovibond™
optical cells. A secure cap is provided to cover the sample,
protecting it from any excessive ambient light, enabling quick
yet accurate readings.
• The units are provided in a purpose-designed case containing
all the accessories required for accurate colour measurement
expected of the Lovibond™ brand.
• The Lovibond™ LC 100 enables setting and maintaining
colour standards throughout the manufacturing process. It
is a lightweight tool that is easy to handle and ready to use.
In just over a second, it not only provides a reading of the
sample but also a report telling how close the colour is to a
measured standard. Together with the Lovibond™ SV 100, it is
the ideal solution for the colour measurement of food, powder,
cosmetics, pastes and pharmaceuticals.
• The LC 100 automatically creates conformance reports in
either PDF or Excel formats for each stored sample against
each standard. These can easily be shared with a PC or
directly to a compatible printer (via USB mass storage mode).
The MD 610 and MD 600 give you mobile devices in a modern
design with the analytical features of laboratory photometers.
All important water analysis parameters from A(luminium) to
Z(inc) are covered by these two devices. Combined with the high
precision of Lovibond™ reagents, a reliable and quick analysis of
water samples is guaranteed. Reagent tablets, powder reagents,
liquid reagents, or cuvette tests are used depending on the
method.
Six long-lasting LEDs serving as a light source in combination
with interference filters guarantee the highest precision. The
devices are designed without moving optical parts and thus have
a maintenance-free measuring unit. Up to 1,000 data records can
be stored in both the MD 610 and the MD 600.
The AquaLX™ app, available free of charge, offers the possibility
of transferring measurements to smart phones or tablets via
Bluetooth™. The data management then enables analysis and
export as a CSV file or graph via email. The app is available free
of charge for Android™ and iOS™.
The proven MD 600 photometer uses the classic infrared
interface with which data can be transferred by means of the
IRiM module to the PC or laptop.
• Optics: LEDs, interference filters (IF) and photo sensor in
transparent sample chamber
• Wavelength range:
430 nm IF ∆ = 5 nm
530 nm IF ∆ = 5 nm
560 nm IF ∆ = 5 nm
580 nm IF ∆ = 5 nm
610 nm IF ∆ = 6 nm
660 nm IF ∆ = 5 nm
IF = interference filter
• Wavelength Accuracy: ± 1 nm
• Photometric Accuracy: 2% FS (T = 20°C – 25°C)
• Photometric Resolution: 0.005 A
Cat No.
Description
15360815
LC 100 & SV 100 Spectrocolorimeter
26
Cat No.
Cat No.
Description
15348314
Infrared1 (MD 600)
15564273
Bluetooth™ 4.0 (MD 610), iOS™ and Android™ app for data
management and email delivery
www.fishersci.co.uk
PH METERS
PH/MV, BENCH METER PLUS
CONDUCTIVITY, BENCH
METER PLUS
• Intuitive Operation – Measurement Made Easy
Featuring a large, well-structured display for easy viewing, the
instruments’ intuitive button arrangement and simple menu
ensure measurements can be performed in just a few clicks
• Compact Design – Save Space
Thanks to its compact design, little bench space is needed for
the Five series meters. The sensor holder can be easily removed
and stored on the side of the meter after use
• Fast Connectivity – Simple and Secure Data Transfer
The FiveEasy Plus series meters allows data to be exported
either directly to a printer or a PC for further processing using its
RS232 or USB ports.
• Large Display – All at a Glance
The well-arranged screen with self-explanatory icons shows all
information needed such as measurement data, sensor status
and current calibration
• Measuring range (pH): -2.00 to 16.00
• Resolution/ accuracy (pH):0.01 /0.1 / ± 0.01
• Calibration points: 5
• Temperature range: 0 to 105°C
• Temperature Resolution/Accuracy: 0.1 / ± 0.3°C
Cat No.
Ideally suited for
Pack qty
15563360
Wide range of samples including emulsions and suspensions
1
• Intuitive Operation – Measurement Made Easy
Featuring a large, well-structured display for easy viewing, the
instruments’ intuitive button arrangement and simple menu
ensure measurements can be performed in just a few clicks
• Compact Design – Save Space
Thanks to its compact design, little bench space is needed for
the Five series meters. The sensor holder can be easily removed
and stored on the side of the meter after use
• Fast Connectivity – Simple and Secure Data Transfer
The FiveEasy Plus series meters allows data to be exported
either directly to a printer or a PC for further processing using its
RS232 or USB ports.
• Large Display – All at a Glance
The well-arranged screen with self-explanatory icons shows all
information needed such as measurement data, sensor status
and current calibration
• Measuring range (cond): 0.01µS/cm to 500mS/cm
• Resolution/ accuracy (cond): 0.01µS/cm to 500mS/cm
• Salinity range: 0.00 to 42psu
• TDS range: 0.01mg/L to 300g/L
• Temperature range: 0 to 105°C
• Temperature Resolution/Accuracy: 0.1 / ± 0.3°C
15573360
Fast results in aqueous samples such as acids, bases etc.
1
Cat No.
Ideally suited for
Pack qty
15583370
Small samples in vials and test tubes
1
15533380
Aqueous samples with mid to high conductivity
1
PH/ION. S220 SEVENCOMPACT METER
The Mettler Toledo SevenCompact™ meter is the perfect choice for a wide range of applications, measuring pH, ORP and ion concentration in various units.
The new colour display with its well designed icons and menu settings in 10 languages makes operation intuitive. Applications range from routine measurements through
sample analysis, data handling and data archiving in compliance with GLP regulations. Simple innovative design that meets the requirements for a universal, easy to operate
pH/ion meter.
The included electrode holder with the perfectly vertical uPlace™ movement helps you bring your electrode into the position where it works best for your sample. This allows
for faster measurements and reduces the risk of the sample vessel tipping over and/or damaging the sensor.
SevenCompact™ gives you the choice to view all measurement information on the display or to focus on the essentials with the uFocus™ view. Switching between the
different display layouts is easy, requiring only a single key press.
This pH meter is suited for a wide range of applications; it can also measure ORP and ion concentration in various units. A single keypress is all that is required to start a
measurement or calibration, toggle measurement modes or switch between displays.
• Prominent colour display, the 4.3 inch high resolution colour display makes relevant information identifiable at a glance
• Two display layouts, switch with a single key press between the full information screen or the uFocus™ layout
• Intelligent sensor management (ISM™), helps eliminate mistakes by automatic identification of the sensor upon connection and ensures that the most recent calibration is
used for future measurements
• Automatic buffer recognition system allows routine calibrations to be carried out quickly without unnecessary error messages
• Connectivity and peripherals, USB and RS232 interfaces allow you to connect various peripherals simultaneously including printers, barcode scanners and a stirrer
Cat No.
Measuring range
Resolution
Accuracy
pH
-2.000 to 20.000
0.001 / 0.01 / 0.1
±0.02
mV
-2,000 to 2,000
0.1/ 1
±0.2
Ion concentration
1.00E-9 to 9.99E+9
± last signifi. digit
±0.5%
Temperature
-30.0 to 130.0°C
0.1°C
±0.1°C
Description and sensors
11384233 Basic kit : includes instrument, electrode holder, protective cover, operating instructions, quick guide, declaration of conformity and test certificate
11304233
Biotechnology kit : 11384233 but with InLab™ Routine Pro-ISM cable kit instead of InLab™ Expert Pro-ISM
15573423
Micro kit : 11384233 but with InLab™ Ultra-Micro instead of InLab™ Expert Pro-ISM
CONDUCTIVITY, BENCH METER PLUS
Measuring range
Resolution
Accuracy
Conductivity
0.001μS/cm to 1,000mS/cm
0.001 to 1
± 0.5%
Temperature
-30.0 to 130.0 °C
0.1 °C
± 0.1 °C
Cat No.
Description and sensors
11314233 Includes instrument, electrode holder, protective cover,operating instructions, quick guide, with InLab™ 731-ISM, guide to conductivity measurements and 2 calibration sachets for
1,413 μS/cm and 12.88 mS/cm declaration of conformity and test certificate
www.fishersci.ie
27
ESSENTIALS
BALANCES
THERMO SCIENTIFIC ORION STAR A211 PH BENCHTOP METER
Anyone can use this meter with its plain language screen prompts, soft keys that update for easy selection and a multilanguage interface that supports English, Spanish,
French, Italian, German and Chinese
• Don’t miss a reading – AUTO-READ™ locks in the stable reading on your screen, ready indicator alerts when readings are stable and timed reading gathers data in specific
time intervals
• Up to 5 point pH calibration with automatic recognition for USA/NIST and DIN buffers
• Non-volatile memory holds up to 2,000 data points with time and date stamp
• Easily transfer data and keep meter software up-to-date with the USB and RS232 ports and complimentary data analysis software
• Works with almost every AC power source with the included universal power adapter, or use four AA batteries (sold separately) to run the meter on DC power
Measuring range
Resolution
Accuracy
pH
-2,000 to 20,000
0.001 / 0.01 / 0.1
±0.02
mV/RmV
-2,000.0 to 2,000.0
0.1
±0.2
Temperature
-5°C to 105°C
0.1°C
±0.1°C
Cat No.
Description
11661449
Thermo Scientific Orion Star A211 pH benchtop meter
10101121
pH combination electrode Sure-Flow glass body
BALANCES, PRECISION AND
ANALYTICAL, SECURA
PH BUFFERS
• Integrated protection systems for absolutely correct and
reliable results
• Avoid errors caused by an unlevel balance
• The highest accuracy ensured by isoCAL automatic calibration
and adjustment
• USP-compliant weighing with SQmin
• Selectable security levels to adapt the balance’s error
response to your needs
• GLP | GMP-compliant documentation with alphanumeric
sample and batch identifiers
• Customisable GLP | GMP header information
• Safe and secure password protection
• Traceable to NIST
Cat No.
Description
10545151
Buffer standard solution pH4.00 (phthalate), stabilised with 10ppm
500
mercury (II) chloride
Pack qty
10082521
Buffer standard solution pH7.00 (phosphate), stabilised with
10ppm mercury (II) chloride
500
10082531
Buffer standard solution pH9.2 (borate)
500
Cat No.
BALANCES, ANALYTICAL,
EXPLORER™ SERIES
•H
igh resolution multi-lingual colour VGA touch display with
icons for simple operation
• P rogrammable multi-functional touch free sensors for
cleanliness, speed and safety
•M
ultiple application modes plus library for storage of personal
application settings
Cat No.
Capacity
120g
0.1g
220g
0.1g
11840113
320g
0.1g
11830113
220g
0.1g
320g
0.1g
28
Linearity, mg
Pan size
diameter, mm
210
1
1
2
120
310
1
1
2
120
13522970
510
1
1
2
120
15284247
610
1
1
2
120
13562970
1,100
10
10
20
180
13572970
2,100
10
10
20
180
13552970
3,100
10
10
20
180
13582970
5,100
10
10
20
180
13542970
120
0.1
0.1
0.2
90
13512970
220
0.1
0.1
0.2
90
Approved models
11850113
Repeatability,
mg
13592970
Readability
11810113
Readability,
mg
13532970
Unapproved models
11820113
Capacity, g
www.fishersci.co.uk
MOISTURE ANALYSERS, TITRATORS
Cat No.
Description
15305123
Moisture analyser
MOISTURE ANALYSER
MOISTURE ANALYSER MA35
Offering high value performance for all budgets and high quality
durable construction with easy one-button setup, the MBS65
is ideal for users at all skill levels. With a large backlit LCD
display, a standard RS232 port, 60g capacity, readability of
0.005g/0.05% and halogen heating, the Fisherbrand MBS65
offers full operational flexibility for many applications in food or
wastewater analysis, quality control protocols or agriculture.
• Large backlit LCD display and standard RS-232 port
• Easy to clean heating chambers ideal for frequent use and
inexpensive maintenance
• Compact footprint designed to take up less laboratory space
• Halogen heating technology
• Repeatability (Std. Dev; g): 0.2% (3g sample), 0.05% (10g
sample)
• Certifications: FCC, CE
• Warranty: Two years
Ideal for daily routine use whether in production or in the
laboratory, for quality control or for inspection of incoming raw
materials. To ensure incredibly fast and effective sample heating
the MA35 is equipped with two powerful metal rod dark infrared
radiators. Easy to understand icons guide you in three steps from
taring the sample pan to starting the measurement. All important
operating parameters can be accessed and changed in seconds.
• Readability, mg: 1
• Capacity, mg: 35
• Pan diameter, mm: 90
Cat No.
Description
10601775
Moisture analyser MA35
KARL FISCHER REAGENTS
• For Karl Fischer titration by volumetry
The first address for* KF titration
EAU
OUV
TitroLine® 7500 KF et 7500 KF trace
ssible de vous tromper avec les
eaux titrateurs TitroLine® KF de
alytics
roLine® 7500 KF est un équipement
étrique généraliste pour un large
ail d’utilisations et le TitroLine® 7500
ce est spécialisé dans les faibles teen eau. Ces deux nouveaux titrateurs
actérisent par les spécifications suiv:
TITRATORS TITROLINE™
KF 7500
apides, précis et faciles d’utilisation
ffrant des méthodes standard pour
fférentes applications (détermination du
re, valeur nulle…)
cran couleur lumineux permettant une
cture quel que soit l’angle ou la distance
émorisation des résultats via port USB
u format PDF et CSV)
sponible avec modules intelligents
terchangeables (TitroLine® 7500 KF
eulement)
The TitroLine™ 7500 KF is the volumetric generalist for a
wide range of use and the TitroLine™ 7500 KF trace is the
specialist for low water contents. Both new titrators are to be
characterized by following features:
• Fast, easy and precise
• With standard methods for different applications (titer
determination, blank value…)
• High visible full color display, that can be easily viewed from a
distance and extreme angles
• Storage of results via USB port ,(PDF– and CSV -format)
lleure adresse de titration KF
TitroLine™
7500 KF
TitroLine™
7500 KF trace
Measuring range
10 ppm – 100 %
1 ppm – 5 % (10
µg – 100 mg)
Accuracy
Dosing accuracy:
< 0.15 %
0.3 % at 1 mg
water
Number of user
methods
50
50
Applications
KF volumetry,
dead-stop-titrations KF colometry,
bromine number
(SO2, bromine
number)
Cat No.
Description
13486768
Volumetric KF-Titrator, scope of supply: titrator unit, interchangeable module WA 10, TM 235 KF titration stand with integrated
stirrer and pump, titration vessel TZ 1,770, micro-dual platinum
electrode KF 1,100 and starter kit, power supply 100-240 V
13596600
Module 2, coulometric KF-titrator, scope of supply: titrator unit,
generator electrode TZ 1752 without diaphragm, TM 235 KF
titration stand with integrated stirrer and pump, titration vessel TZ
1,754, micro-dual platinum electrode KF 1,150
Cat No.
Description
Pack qty
10181570
Karl Fischer Aqualine™ Complete 5
1L
10092042
Karl Fischer Aqualine™ Complete 5K
1L
10205592
Karl Fischer Aqualine™ Matrix K
1L
10528810
Karl Fischer Aqualine™ Titrant 5
1L
10609672
Karl Fischer Aqualine™ water standard 5mg
500mL
SPECTROPHOTOMETER,
THERMO SCIENTIFIC™
GENESYS™ 10S
The Thermo Scientific GENESYS 10S UV-Visible
spectrophotometer is a robust and reliable UV/Vis instrument
which is designed to be easy to programme and easy to use.
This compact instrument offers locally controlled functionality
together with USB outputs for data export and, single and multisampling capability as standard.
• Lamp: Xenon Flash Lamp
• Optical design: dual beam - internal reference detectorr
• Photometric linearity: 3.5 Abs
• Spectral bandwidth: 1.8nm
• Stray light: <0.08%T at 220, 340nm (NaI, NaNO2)
<1<1.0%T 198nm (KCl)
• Voltage: 100/240V
• Wavelength range: 190 to 1,100nm
• Wavelength scan speed: 3,600nm/min
Cat No.
Description
12104972
Spectrophotometer, Thermo Scientific™ GENESYS™ 10S
www.fishersci.ie
29
ESSENTIALS
REFRACTOMETERS, BOD, OXIDATION
CUVETTES, DISPOSABLE,
POLYSTYRENE
REFRACTOMETERS
RFM900-T
• Easy clean prism
• Wide range: 1.30 to 1.70 RI
• Standard RI and Brix range
• User scale library
• Up to 6 decimal places RI
• Wide temperature range
• Peltier temperature control
• SMART temperature stability
• Auto read function
• Transparency Approximately 90% between 400nm and 800nm
• Range, nm: 336 to 850
• Lightpath, mm: 10
• Dimensions [w x h], mm: 12.5 x 45
Cat No.
Description
Capacity, mL
Pack qty
11537692
Macro
4
100
11547692
Semi-micro
1.6
100
11847832
Semi-micro
1.6
1,000
Angular
ISS (°Z)
Range
-355 to + 355
selectable
-225 to +225
Resolution
0.01/0.001
0.01/0.001
Reproducibility
0.002
0.005
Accuracy
±0.01
±0.03
Beam Diameter
4mm
11944249
ADP440+ digital polarimeter supplied with one centre filling tube (200mm), pack of
three RFID tags, instruction manual and certificate of conformity.
Bod sensor 6 230V/60HZ
30
±0.0001
±0.0002
Sugar (°Brix)
±0.1
±0.02
Refractive Index
±0.00005
±0.000005
Sugar (°Brix)
±0.05
±0.005
Temperature Sensor
Accuracy
±0.03°C
Sample Temperature
Stability
±0.02°C
Description
11990058
RFM960-T Peltier temperature controlled refractometer with latest integral 7” full
colour touch-screen, high definition display and USB/LAN connectivity. Supplied with
pack of two RFID tags, instruction manual and certificate of conformity.
15563423
RFM970-T Peltier temperature controlled refractometer with latest integral 7” full
colour touch-screen, high definition display and USB/LAN connectivity. Supplied with
pack of two RFID tags, instruction manual and certificate of conformity.
OXIDATION STABILITY
REACTOR OXITEST
The BOD Sensor Systems comprise of a six or ten position
stirring unit complete with BOD sensors, alkali holders for
absorbing the carbon dioxide and stirring bars.
The instrument represents a complete solution for the user. It is
immediately operational for measuring the BOD on four scales
90ppm, 250ppm, 600ppm and 999ppm. The sample quantity to be
examined varies from 100mL to 400mL, the bottles total capacity
being 500mL. The compact, easy to handle design means that six
or ten BOD bottles can be housed in a small amount of space.
Features a stirring system offering non stop operation without
the risk of shut off or overheating.
• Complete system for BOD analysis
• Analysis performed over weekends: the BOD sensor
automatically stores five BOD measurements at 24hr intervals
Bod sensor 6 230V/50HZ
Refractive Index
Cat No.
BOD ANALYSIS SENSORS
15369494
0.01/0.001
5-40 °C
Description
Description
0.000001
0.1
4 – 30 seconds (selectable)
Cat No.
12754536
0.0001
Sugar (°Brix)
Precision
Specifications
Cat No.
Refractive Index
Accuracy
• Multiple scales
• Temperature display
• Optical density display
• Temperature compensation
• LED/Interference filter
• Parallel printer port
• RS232 x 2 (refractometer/PC/barcode)
• Barcode reader
• High resolution LCD display
• Conforms to USP/EP/BP/JP
Reading Time
RFM970-T
Resolution
POLARIMETER ADP440
Temperature
RFM960-T
• Prediction of the oxidative stability during shelf-life studies
tests the product at defined time intervals; builds an
experimental curve
• Evaluation of the adequacy of storage conditions
• Evaluation of the best packaging solution
• Comparison of the oxidative stability of different formulas for
food preparations
• Evaluation of the oxidative stability of vegetable oils of
different botanical origin
• Evaluation of the effectiveness of antioxidants
• Information on product oxidation when the oxidation flex is not
visible especially useful for products with a low fat content
(4-5%) product oxidation can be achieved by combining the
OXITEST with GC
• Oxidative stability test of incoming raw materials and outgoing
finished products
Cat No.
Description
11743479
Oxidation stability reactor Oxitest
www.fishersci.co.uk
KJELDAHL, FURNACE, MICROSCOPE
KJELDAHL DIGESTION UNIT
KJELDAHL DISTILLATION
UNIT
Traditional Kjeldahl Digestion Units for nitrogen analysis and
protein determination, with an aluminum heating block that
offers an excellent thermal homogeneity, with a maximum
working temperature of 450°C.
• Epoxy painted with chemical resistant coating
• 6-position for 250mL test tubes (Ø 42mm)
• Temperature range: ambient to 450°C / 842 °F
• Selectable ramps: up to 4 per program
• Temperature Calibration: automatic
• Stability of the heating block temperature: ± 0.5 °C
• Precision of the heating block temperature: ± 0.5 °C
• Digestion time range: 1 to 999 minutes
• Time selection: 1 minute steps
Cat No.
Description
11761164
Kjeldahl Digestion Unit
Entry-level Kjeldahl distillation unit for your analyses covering
different applications such as determining ammoniacal nitrogen,
protein determination, nitrogen content (Kjeldahl or direct
alkaline distillation), nitric nitrogen (after reduction/Devarda),
phenols, volatile acids, cyanides and alcohol content.
• Corrosion-resistant technopolymer
• Time related to start for Devarda alloy analysis: 0 to 99 min
• Reproducibility (RSD): ≤ 1%
• Recovery: ≥ 99.5% at nitrogen levels between 1 and 200 mg N
• Detection Limit: ≥ 0.1mg N
• Distillation time: 5 minutes to collect 100 mL of distillate
• Sodium hydroxide addition: automatic
• Sodium hydroxide volume: 0 to 100 mL
• Tap water consumption: from 0.5L/min at 15°C – from 1L/
min at 30°C
Cat No.
Description
11795664
Kjeldahl Distillation Unit
SOLVENT EXTRACTOR
MICROSCOPE A1
COMPOUND
Solvent extraction system suitable for the separation of a
substance or a group of elements from solid and semi-solid
samples according to the Randall technique.
• epoxy painted stainless steel structure
• 3 positions
• Reproducibility (RSD): ≤ 1%
• Solvent recovery: from 50 to 75%
• Max volume extraction cup: 150mL
• Number of programs: 29
• Working temperature: from 100 to 260 °C
• Cooling water: 2L/min
• Sample quantity: from 0.5 to 15g (generally 2-3 g)
• Solvent volume: from 30 to 100mL
Cat No.
Description
10787708
Solvent Extractor
The microsope is highly ergonomic, easy to operate and has
brilliant image quality for versatile biomedical applications.
Reliable microscopic images are crucial, particularly in laboratory
use. With the Axio™ Lab.A1 you are guaranteed to work with
a microscope that combines maximum performance and cost
effectiveness. The special plus for long term microscope users is
TUV approved ergonomics.
The Axio™ Lab. A1 has been designed for daily laboratory
applications. Users in microbiology, cytology, haematology and
pathology labs as well as college, industry and university labs
will benefit particularly. All applications in brightfield, darkfield,
phase contrast or fluorescence can be performed readily with
the full range of ZEISS ICS objectives. A number of attractive
features are designed to guarantee quick and reliable handling
and ease of use, including predefined configurations. Additional
configurations and accessories including daylight and warmlight
LED illuminators are available on request.
• TUV approved ergonomic configuration for maximised comfort
and a stress free working position
• Convenient position of all main operating elements and the
use of soft touch, tactile materials
• High quality material: the stand is made of metal and all
operating elements are coated with a special tactile material
compound
• Long term durability through the use of high quality materials
• Excellent optical quality for reliable results
• Numerous tubes, including multi-observation, and accessories
for a wide range of applications
• Transmitted light illumination: HAL 35 W, LED daylight or LED
warmlight
• The Axio™ Lab. A1 ensures easy to use fluorescence with 2
LED positions
• Comfortable and convenient: all main elements are within the
reach of one hand
• Integrated tool bar on the back of the microscope
• The new multi-discussion system from Carl Zeiss is compatible
with Axio™ Lab.A1
MUFFLE FURNACES
Thermo Scientific™ Thermolyne™ muffle furnaces offer heating
solutions for a number of application needs. From general
laboratory use to industrial applications, Thermolyne furnaces
are ideal for fast heat up and temperature control up to 1,100°C.
Cat No.
Capacity, L
Temperature range, °C
Temp. stability/Uniformity at 100°C
Cat No.
Description
10215522
1.3
100 to 1.100
±0.3°C/±7.8°C
11317170
Microscope A1 compound
10453152
2.1
100 to 1.100
±0.5°C/±5.0°C
Accessories
11831900
Polariser D90° rotatable removable
11815023
Slider analyser D fixe
11844782
x 50 Frosted glass slide 76 x 26mm
www.fishersci.ie
31
ESSENTIALS
OVENS, CLIMATE CHAMBER, PUMPS
OVENS, HEATING AND DRYING
From simple drying of glassware to the most complex and carefully controlled
heating applications, the Thermo Scientific™ Heratherm™ oven range includes an
array of solutions to match your needs.
Efficient
• Surpassing energy efficiency, increasing cost effectiveness, reducing
environmental impact
• Unique door design reduces heat emission significantly
• Timer for effective usage and additional energy savings
• Space saving footprint without compromising volume
• Flexible shelving system allows for optimal space utilisation
Safe
• Routine check upon startup for optimum performance levels
• Temperature uniformity as good as ±2°C at 150°C
Cat No.
Model No
Type
Volume, L
Dimensions, external [w x d x h], mm
• Automatic audible and visual over temperature alarm
• Access port for data logging with independent sensors
Easy
• Easy to read, large display
• Easy setting with intuitive interface
• Easy cleaning with rounded corners
Temperature range, °C Timer General Protocol: 50 to 250
General Protocol: on/off
Dimensions, internal [w x d x h], mm
Mass, kg
No. of shelves [max/
standard]
Pack qty
10659650
OGS60
Gravity convection
65
530 x 565 x 720
328 x 415 x 480
42
13/2
1
10669650
OGS100
Gravity convection
105
640 x 565 x 820
438 x 414 x 580
53
16/2
1
10304150
OGS180
Gravity convection
176
640 x 738 x 920
464 x 589 x 680
66
19/2
1
10661751
OMS60
Mechanical convection
66
530 x 565 x 720
354 x 368 x 508
42
13/2
1
10794982
OMS100
Mechanical convection
104
640 x 565 x 820
464 x 368 x 608
53
16/2
1
10291870
OMS180
Mechanical convection
179
640 x 738 x 920
464 x 543 x 708
66
19/2
1
OVENS, UNIVERSAL
CLIMATE CHAMBER ICH260L
• Precise and homogenous temperature control
independent of chamber volume and load
• Temperature range up to +300°C
• Forced air circulation
•A
ugmented functionality with convenient, approved and tested
accessories
•W
orking chamber and housing constructed almost exclusively
from high quality, corrosion resistant and easily cleanable
stainless steel
•A
wide range of options for programming and documentation
using interfaces, integrated data logger and AtmoCONTROL
software
• T hree year guarantee for appliances except wear and tear
parts
• T he temperature values of all universal ovens are measured
according to DIN 12880: 2007-05
• Each universal oven is safety tested and CE marked
In the ICH L climate chamber, stability tests in accordance
with ICH guidelines Q1B, option 2, can be performed, thanks
to an illumination unit. Fluorescent lights with cold white light
(standard illuminant D65, 6,500 K) and UV radiation in the
spectral range of 320 - 400 nm with a light intensity of approx.
8000 Lux serve as the light source
• Intuitive and easy-to-use operating menu
• Temperature and humidity ramps programmable via
AtmoControl software
• Almost exclusive use of high-quality, corrosion-resistant and
easily cleanable stainless steel for the working chamber and
housing
• Peltier heating and cooling concept specifically adapted for a
precise and homogenous temperature control
• A wide range of options for programming and documentation
using interfaces, integrated data logger and AtmoCONTROL
software
Cat No.
Description
12646987
Universal oven UF55, single display with touchscreen, 1 grid, 230V 50/60Hz, 400mm
x 400mm x 330mm (w x h x d), 53L volume
12626987
Universal oven UF55plus, twin display with touchscreen, 1 grid, 230V 50/60Hz,
400mm x 400mm x 330mm (w x h x d) 53L volume
12616997
Universal oven UF110, single display with touchscreen, 2 grids, 230V 50/60Hz,
560mm x 480mm x 400mm (w x h x d) 108L volume
12626997
Universal oven UF110plus, twin display with touchscreen, 2 grids, 230V 50/60Hz
560mm x 480mm x 400mm (w x h x d) 108L volume
Cat No.
Capacity, Temperature
L
range, °C
Resolution
Dimensions, interior, Dimensions, exterior,
W x H D, mm
W x H D, mm
13467689
260
0.1°C
640 x 800 x 500
10 to 60
824 x 1,552 x 734
GP1000 PERISTALTIC GENERAL PURPOSE PUMP SYSTEM
Easy to maintain
• Pump head enables rapid tubing changes
• Robust motor and drive system provides low-maintenance long-term operation
• Contamination free pumping—the fluid contacts only the tubinWg material
Easy to use W
• Intuitive control keypad
• Stop and start from the front panel
• Easily increase/decrease flow through the membrane key-pad
• Universal voltage and frequency capability allows operation world-wide—
IEC320 socket provided
• R eversible pump direction permits purging of tubing prior to use
•Q
uick start guide included for fast easy set-up
Diverse performance range
•U
tilizes various tubing sizes to provide a broad flow range
•A
bility to pump against pressure up to 60 PSIG providing longer filtration cycles
Cat No.
Description
15377547
GP1000 Peristaltic General Purpose Pump System
32
www.fishersci.co.uk
Ergonomic design
• Space efficient—low-profile, stackable design
• Safety interlock powers unit down when changing tubing
• Remote control capability—ideal for automated process applications
• Accurate, reliable control of flow and dosing— digital display of RPM for
accurate control
• Flow Capacity (mL/min): 0.5 to 3,000
• RPM: 4 to 400
• Reversible: Yes
• Operating temperature: 0 to 40°C (32 to 104°F)
• Dimensions (L x W x H): 31.7 x 27.9 x 15.2 cm
• Shipping weight: 7kg
PUMPS, THERMOMETERS, TIMERS
DP2000 DISPENSING PUMP
SYSTEM
The DP2000 is a peristaltic pump system, offering superior
performance with precision and ease-of-use. Designed to handle
a wide range of fluids, from the highest purity to extremely
caustic solutions, this pump is used in a broad range of critical
applications, from agriculture to chemical processing; and from
beverage dispensing to semiconductor polishing. Reversible
pump direction permits purging of tubing prior to use.
• Programmable, easy-to-use, low maintenance
• Utilises various tubing sizes providing a broad flow range
• Available tubing materials comply with global pharmaceutical,
sanitary and food standards (USP, EP, FDA and NSF)
• Digital display
• Flow Capacity (mL/min): 0.5 to 3,000
• RPM: 4 to 400
• Voltage (50/60 Hz): 115/230V AC (auto selected)
• Materials: Housing, ABS; Pump head, GF Nylon, Delrin™,
Stainless steel, Cold-rolled steel, Buna N, Polycarbonate
• IP rating: IP31
• Controller dimensions (L x W x H), mm: 317 x 279 x
152
• Compliance: Complies with stringent safety standards of UL,
ETL, CE, C1 and with RoHS and WEEE directives
Cat No.
Description
15397547
DP2000 Dispensing Pump System
TRACEABLE™ SENTRY™
THERMOMETER
• Simple one-key reset operation resets MIN/MAX memories
• Constantly monitor high, low and current temperatures
• Sensor and 3m cable may be placed underwater, in refrigerator
or in freezer
• Unplugging the cable activates a sensor inside the unit for
monitoring ambient temperature
• Supplied with battery, probe, 3m cable, wall mount, magnet,
stand, Velcro™, Traceable™ Certificate
Cat No.
Range
Resolution
Accuracy
Probe
11785843
-50 to 70°C (58 to
158°F)
1°
±1°C
5mm diameter and
19mm long
TRACEABLE™ MEMORYCARD REFRIGERATOR/
FREEZER DATA LOGGING
THERMOMETER
TRACEABLE™
THERMOMETER, LOLLIPOP,
STAINLESS STEEL
• Temperature and humidity data logger with Min/Max memory
and High/Low alarms
• User-defined temperature observations can be made once per
minute up to once every 720 minutes
• Thermometer captures 5.9 million readings on removable SD
card
• USB memory card reader plugs directly into Windows and Mac
- no software to install
• Text report includes date/time of day and sensor readings
• Alarm sounds and LED flashes when temperature rises above
or falls below user-set trip points
• Supplied with 256Mb SD memory card, memory card reader,
batteries, magnetic strips, Velcro™, flip open stand, adaptor,
Traceable™ Certificate
• Featherweight, wide-range lab partner covers 99% of routine
temperature measurement needs
• Shock/waterproof unit delivers reading updates every second
• One-key operation recalls MIN/MAX temperature results, °C
or °F switchable
• Supplied with battery, probe, probe cover with pocket clip,
Traceable™ Certificate
Cat No.
Cat No.
Description
11785853
Traceable™ Thermometer, Lollipop, Stainless Steel
13587070
Range
-30 to 70°C (22 to
158°F)
TRACEABLE™ INSTANTRECALL MEMORY TIMER
Description
11775873
Traceable™ Instant-Recall Memory Timer
Accuracy
0.1°
±5°C from 0°C
to 25°C; ±0.6°C
from 25°C to
Stainless steel
70°C; ±1.2°C from
-30°C to 0°C; and
50 to 70°C
Probe
TRACEABLE™ FINGERTIP
TIMER
• Features: count down, time in/out, alarm, memory
• Intuitive, three-key programming makes this an all-time
favourite for delivering countdown results
• Input a time and the instant memory always returns the
display to the programmed time
• Extra-large, 16 mm-high digits
• Timing capacity: 99 minutes, 59 seconds
• Resolution: 1 second
• Accuracy: 0,01%
• Supplied with battery, Traceable™ Certificate
Cat No.
Resolution
• Quick-to-program, three-key, countdown timer delivers errorfree operation for any lab test
• Features: count down, time in/out, alarm
• Impressive memory, remembers most recently programmed
setting for recurring lab experiments
• Supplied with battery, magnetic back, Velcro™, Traceable™
Certificate
• Timing capacity: 99 minutes, 59 seconds
• Resolution: 1 second
• Accuracy: 0.01%
Cat No.
Description
11745873
Traceable™ Fingertip Timer
www.fishersci.ie
33
ESSENTIALS
TIMER, ULTRAPURE WATER SYSTEM
TRACEABLE™ GIANTDIGIT™ COUNTDOWN
TIMER
TRACEABLE™ QC TIMER
• Simple three-key use and large digits for easy viewing
• Features: count up/down, alarm
• Easy three key operation
• Times set up to 20hr in 1min increments
• At zero 1min alarm sounds
• Very large 19mm LED digits
• Timing capacity: 19 hours, 59 seconds
• Resolution: 1 min
• Accuracy: 0.01%
• Supplied with battery, flip-open stand, magnet, Traceable™
Certificate
Cat No.
Description
11715873
Traceable™ QC timer
ULTRAPURE WATER
SYSTEM, BARNSTEAD™
GENPURE™ XCAD PLUS
• View giant digits on your bench timer from across the lab
• Features: count up/down, alarm, memory, stopwatch mode
• 34mm digit height - viewable from 15m
• Countdown and alarm on single channel for ease of use
• Three button intuitive operation eliminates reading instructions
• Automatic Bounceback™ memory for repetitive timing
• Counts up during alarming indicating elapsed time since
alarming
• Counts up in stopwatch mode
• Timing capacity: 99 minutes, 59 seconds
• Resolution: 1 second
• Accuracy: 0.01%
• Supplied with stand, magnetic back, battery, Traceable™
Certificate
Cat No.
Description
11765863
Traceable™ GIANT-DIGIT™ Countdown Timer
Gain flexibility in the lab with the new Thermo Scientific™
Barnstead™ GenPure™ xCAD Plus ultrapure water system.
Its advanced technologies allow for simultaneous dispensing
from up to three remote dispensers for ease of use in shared
laboratory environments. This lab water system comes with
leak detection, electronic dispensing for fully automatic
volume control and feed water monitoring that alerts users to
fluctuations in the feed water quality. All consumables needed
for start-up come with the system, allowing for simple ordering
and setup.
• Resistivity: 18.2MΩ·cm at 25°C
• Conductivity: 0.055µS/cm
• Flow rate: up to 2L/min
• Total organic carbon: 1 to 5ppb
• Endotoxin concentration: <0.001EU/mL
• Bacterial content: <0.01 CFU/mL
• Temperature range: 2° to 35°C
• Dimensions, W x D x H, mm: 372 x 330 x 615
Cat No.
Description
15209335
Barnstead™ GenPure™ xCAD Plus
Cosmetic Industry –
Is chromatography analysis important to
your process?
Our chromatography solutions brochure features a comprehensive range of
high quality and reliable products.
Discover how you can validate a large range of parameters during all steps of
your processes.
Available on eu.fishersci.com
34
www.fishersci.co.uk
CHROMATOGRAPHY
PAPER, COLUMNS, SOLVENTS, VIALS
HPLC COLUMNS
CHROMATOGRAPHY PAPER
CHR 100
• Flow rate: 145mm/30 min
• Format: sheet
• Grade: 501
• Film thickness: 0.19mm
• Dimensions (L x W): 200 x 200mm
• Fisherbrand™ CHR 100 grade of paper may be used in many
applications where Whatman No. 1 CHR or Schleicher &
Schuell No. 2043a are used
Cat No.
Description
Pack qty
11718742
Chromatography paper CHR 100
100
• Surfactant Plus, ideal selectivity for simultaneous separation
of anionic, nonionic, cationic and amphoteric surfactants
• Ease of operation ensures optimal, fast separations
• Accelerate sample throughput up to 30-fold compared to
conventional LC, with Dionex RSLC Solutions
• Hypersil GOLD Phenyl, exceptional peak symmetry and
resolution
Cat No.
Description
12749825 HPLC Acclaim Surfactant Plus 3µm 3 x 150mm
12769795 HPLC Acclaim RSLC 120C18 2.2µm 3 x 75mm
10056364 HPLC Hypersil GOLD Phenyl 3µm 2,1 x 100mm
VIALS, CRIMP TOP AND
MICRO-INSERT, 11mm (WIDE
OPENING) ND11
HPLC SOLVENTS
Fisherbrand amber and clear glass crimp top and micro vials,
suitable for use with the following autosamplers: Agilent, Carlo
Erba, CTC, Dani, Fisons, Gerstel, Jasco, Perkin Elmer, Shimadzu,
Spark, Thermo Scientific and Varian.
• HPLC grade quality
Cat No.
Description
Pack qty
10407440
Acetonitrile, for HPLC
2.5L
10499560
Methanol, HPLC for gradient analysis
2.5L
10598800
Heptane, for HPLC, approx. 99% n-Heptane
2.5L
10264350
Tetrahydrofuran, for HPLC, unstabilised
2.5L
Cat No.
Description
Capacity,
mL
Dimensions,
mm
Pack qty
11535884
Clear glass crimp vial wide
opening, graduated with
marking spot
1.5
11.6 x 32
100
11545884
Amber glass crimp vial top
11mm wide opening with
labelling and filling lines
1.5
11.6 x 32
100
CAPS, CRIMP, ALUMINIUM,
11MM WITH 5,5mm CENTRE
HOLE
FILTER UNITS, SYRINGELESS
MINI-UNIPREP
Distributor
GE Healthcare
Cat No.
•All in one filtration process allows you to process sample loads
in a third of the time
• Three consumables in one unit: syringe, filter and flask
• Six filtration steps in one with the six position compressor
• Compatible with most major autosamplers
Description
• Clear aluminium cap lacquered
Cat No.
Description
Thickness,
mm
Hardness
Pack qty
10204712
With nat.red-orange rubber/
butyl red/ TEF transparent
1.0
45° shore A
1,000
Pack qty
Mini-UniPrep™ syringeless filtration system, standard cap, translucent housing
11388734
0.2
PVDF
100
11398734
0.2
Nylon
100
11308744
0.2
PTFE
100
11308754
0.2
RC
100
11338744
0.45
PVDF
100
11368744
0.45
Nylon
100
11378744
0.45
PTFE
100
11305124
0.45
RC
100
COMPRESSOR MINIUNIPREP 6 COMPRESSORS
Distributor
GE Healthcare
• All in one filtration process allows you to process sample loads
in a third of the time
• Three consumables in one unit: syringe, filter and flask
• Six filtration steps in one with the six position compressor
• Compatible with most major autosamplers
• Material (housing): polypropylene
• Material: PTFE coated silicone rubber
• For use with: Mini-UniPrep G2 syringeless filters
Cat No.
Description
11318724
Compressor mini-uniprep 6 monsters
www.fishersci.ie
35
LIFE SCIENCE APPLICATIONS
INCUBATORS, PETRI DISHES, LOOPS, SPREADERS
INCUBATORS, CO2
THERMO SCIENTIFIC™
FORMA™,
STERI-CYCLE™ I160
PETRI DISHES,
POLYSTYRENE
A direct heat CO2 incubator that better supports you and your
science.
The incubator delivers the performance reliability, ease of
operation, and value required to support a range of culturing
needs from basic research to demanding, leading edge
applications, so you’re ready for whatever comes next!
• 165L (5.8 cu ft) in a compact foot print, readily stackable
• Choice of electropolished stainless steel or 100% pure copper
• Adjustable, perforated shelving
• Easy to clean, coved corners with convenient access port
• Reversible exterior door for added flexibility
Better solutions for optimal cell growth
Revolutionary THRIVE™ active airflow technology delivers
homogeneous growth conditions fast, avoiding unwanted sample
variation.
Complete contamination control
Proven protection from every direction including ISO class 5
HEPA filtered air, on demand high temperature sterilisation, and
easy to maintain copper.
Enhanced simplicity
Designed to focus on convenience, allowing you to spend more
time on your research and less time managing your incubator.
• Easy to maintain 100% solid copper option
• On demand data and error logs
• Condensation free humidification system
Cat No.
Description
15321085
Incubators, CO2 Thermo Scientific™ Forma™, Steri-Cycle™ i160
• Dishes for aseptic production
The melting temperature of the raw material used during their
manufacture is approximately 250°C. This is considered to be
sufficient to destroy bacteria. The dishes are packed under
very strict aseptic conditions
Cat No.
Type
Diameter, mm
Height, mm
Pack qty
12694785
Triple vent
90
14.2
600
12644785
No vent
90
16.2
600
12654785
Single vent
90
16.2
600
12664785
Triple vent
90
16.2
600
INOCULATING SPREADERS,
BACTERIAL, CELL
• Packed in tamper evident zipper bags
• Material: Polystyrene
• Sterile: Yes
• Colour: White
• Disposable: Yes
• Shape: L-shape
• Length: 148mm
• Certifications: EC N°1935/2004, ISO 11137
• For Use With Application: For dairy, environmental, industrial,
microbiological uses
Cat No.
Description
Pack qty
11836191 Inoculating spreaders, bacterial, cell
INOCULATING SPREADERS,
BACTERIAL, CELL
LOOPS, INOCULATING
• Packed in tamper evident zipper bags
• Material: Polystyrene
• Sterile: Yes
• Disposable: Yes
• Length: 148mm
• Certifications: EC N°1935/2004, ISO 11137
• For Use With Application: For dairy, environmental, industrial,
microbiological uses
• Highly ergonomic
• Sterile 10-3
• Traceability on each bag of 20 quantity in zipped bag
• Packaged in tamper evident zip bag
• Flexible polystyrene
• Unique mixed extremity (1/10uL) reduces inventory complexity
• Material: Polystyrene
Capacity, µL
Length, mm
Pack qty
11733124 Green
1
192
3,000
11763124
10
194
3,000
Cat No.
36
Colour
Blue
400
Cat No.
Shape
Colour
Pack qty
11774166
T-shape
Green
500
www.fishersci.co.uk
SWABS, BIOLOGICAL SAFETY CABINETS, MICROTUBES
Cat No.
Capacity,
mL
MICROCENTRIFUGE TUBES
WITH LOCKING SNAP CAP
MICROTUBES SNAPLOCK
MAXYCLEAR
• Convenient, pierceable locking lids snap into place with onehanded operation
• Polypropylene (PP)
• Graduated
• Flat and pierceable cap
• Locking lid to secure the sample and avoid undesired opening
• Marking area
• Autoclavable and can withstand temperatures to -86°C
• DNase/RNase and pyrogen free
• Easy one-hand use
• RCF, xg max: 2,000
• Capacity, mL: 1.5
• Closes with a ‘snap’ and stays closed during centrifugation
• Frosted cap surface for labeling
• Frosted panel on the side for writing
• 0.28mm piercing port in the centre of the cap allows easy
access to sample by syringe needle
• Autoclavable
Bottom
shape
Max. RCF,
xg
Diameter,
mm
Length,
mm
Pack qty
15422545
0.5
Conical
30,000
10
30
500
15432545
1.5
Conical
26,000
13
39
500
15442545
2.0
Round
25,000
13
40
500
Cat No.
Description
Colour
Pack qty
11361904
Snaplock Microtubes
Assorted
500
11351904 Snaplock Microtubes
Natural
500
Snaplock Microtubes
Pre-Sterilised
Natural
250
11326144
SAFETY CABINETS, CLASS II
BIOLOGICAL, SAFE 2020
• Superior personnel and product protection with best-in-class
air flow and filter technology
• Exceptionally comfortable ergonomic design prevents user
fatigue and promotes safe working habits
• Maximised energy efficiency for environmental protection and
significant cost savings
• Superior d.c. technology uses energy efficiently, emits less
heat
• Smart Flow™ digital technology maintains consistent airflow
during normal filter loading or temporary airflow obstruction
• Supply/exhaust air filter: H14 HEPA EN 1822, 99.995% at the
most penetrating particle size (MPPS)
• Sash opening: 200mm working height; can be fully opened to
773mm for thorough cleaning
• Optional crossbeam UV irradiation in both side walls
illuminates entire working area - ensures thorough disinfection
for maximum sample protection
• Quiet: noise levels 56 or 58dBA, depending on model
• Safety and protection
• Pressure sensor monitoring ensures safe airflow across the
entire work surface
Cat No.
Dimensions, mm
10284804
800 x 1,000 x 1,586
10462614
800 x 1,300 x 1,586
10294804
800 x 1,600 x 1,586
10422784
800 x 1,900 x 1,586
Simpler Safer
Discover our new filtration solutions for the protection
of laboratory personnel, designed to be
Simpler Safer
Halo Smart
Laboratory air
filtration system
Captair Smart
Captair Smart
Ductless filtering fume hoods
Ductless filtering chemical storage cabinets
SWABS, ENVIRONMENTAL
Halo sense
Smart
Lab air quality sensor
• For environmental sampling, particularly in the food and
pharmaceutical industries
• Available in easy to use kit format consisting of a sealed tube
with neutralising buffer, capped swab and sampling template
• Sterile sampling templates, 100mm x 100mm (1m2), enable
accurate calculation of colony forming units per mm2
Cat No.
Description
Shaft
Type
length, mm
Inner pack qty
Pack qty
12802833
Square sampling kit, 902C
with square sampling
template
13
1
10
PS
www.fishersci.ie
Require the best of
filtration quality
Powerful
communication
interface by light
Connect your units and
benefit from
remote control access
via our
mobile solutions.
37
LIFE SCIENCE APPLICATIONS
EVAPORATORS, ULTRASONIC BATHS
ROTARY EVAPORATORS
HEI-VAP ADVANTAGE G1
Includes leading safety standards and features for superior ease
of use and reduced cost of ownership, plus:
• Hand lift configurations
• Experience the advantages of our large digital 3.5 ‘’ LCD
display which indicates rotation speed, heating bath and vapor
temperature
• Experience the advantages of the automatic process timer
which turns off your evaporator at a pre-programmed time and
removes evaporating flasks from bath on motor lift models
Cat No.
Description
10321025
rotary evaporators HEI-VAP Advantage G1
BATHS, ULTRASONIC, ANALOGUE
• State of the art microprocessor controlled ultrasonic cleaning and sweep technology
• Long lifepan from cavitation resistant stainless steel tanks
• LED display showing set and remaining time and pre-set and actual temperature
• Ergonomically shaped plastic carrying handles
• Newly developed cover reduces noise and accelerates the heating up process
• Easy draining of cleaning liquid though the drain duct via a dial on the side
• Operating panel arranged so that liquid cannot enter the electronics
• Degas function key
Cat No.
Model No
Volume, L
Dimensions, external [w x d x h], mm
Dimensions, internal [w x d x h], mm
Carrying handles
Power, W
Mass, kg
10591203
S10H
0.8
206 x 116 x 178
190 x 85 x 60
No
90
2
10162372
S30H
2.75
300 x 179 x 214
240 x 137 x 100
Yes
280
3.3
10345822
S60H
5.75
365 x 186 x 264
300 x 151 x 150
Yes
550
5.1
10663113
S80H
9.4
568 x 179 x 264
505 x 137 x 150
Yes
750
6.4
10204762
S120H
12.75
365 x 278 x 321
300 x 240 x 200
Yes
1,000
7.5
LIDS, PLASTIC
BASKETS, STAINLESS STEEL
Cat No.
For use with
Cat No.
For use with
10060892
0.8L baths
11726188
0.8L baths
10560243
2.75L and 4.25L baths
10241320
2.75L and 4.25L baths
10798294
5.75L baths
11756188
5.75L baths
11846244
6.9L and 9.4L baths
11776188
6.9L and 9.4L baths
10487912
9.5L and 12.75L baths
11796188
9.5L and 12.75L baths
38
www.fishersci.co.uk
MP Biomedicals
Dextran Sulfate Sodium Salt for cosmetic industry
Proven superior quality for:
• Anti-inflammatory & anti-allergic effects
• Prevention of free radical damages
• Interaction with lipoproteins, enzymes & cells
• Anti-wrinkle effects
• Treating rough, chapped skin
• Anti-ageing effects
Now available at Fisher Scientific.
Cat. No: 11497860
Pack Size: 100 g
Cat. No: 11427880
Pack Size: 100 g
www.fishersci.ie
39
INDUSTRIES
CHEMICAL
© 2016 Thermo Fisher Scientific Inc. All rights reserved.
Trademarks used are owned as indicated at www.fishersci.com/trademarks.
© 2016 Thermo Fisher Scientific Inc. All rights reserved.
Trademarks used are owned as indicated at www.fishersci.com/trademarks.
In the United Kingdom:
For customer service, call 01509 555000
To fax an order, use 01509 555111
To order online: www.fishersci.co.uk
In Ireland:
For customer service, call 01 885 5854
To fax an order, use 01 899 1855
To order online: www.fishersci.ie
11913_EN_UK
COSMETIC
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement