material handling solutions
MATERIAL HANDLING SOLUTIONS
Gamber-Johnson is a leading manufacturer of rugged mounting solutions for your equipment. We offer a variety of
mounts that can be configured for your specific make and model. Gamber-Johnson offers an assortment of products
designed to hold fixed vehicle computers, tablets and keyboards. Whether you want to mount your device horizontally
on the overhead guard leg, vertically off the overhead guard or anywhere else, Gamber-Johnson has a solution that will
fit your needs.
Gamber-Johnson tests all of their products to ensure they function flawlessly in the most rugged environments. Our
mounts are durable enough to hold displays weighing over 20 lbs. horizontally, off the overhead guard leg, without a
problem. We offer a rugged solution to ensure you have a safe and ergonomic solution.
Clam Shells (Small and Large Backer Plate)
The Single Clam Shell features VESA 75mm, Gamber-Johnson 2x4, NEC or AMPS hole patterns to allow you to easily
attach a device, dock, cradle or interface plate. The ability to adjust the angle of the device up or down helps to create
a more ergonomic solution and allows you to determine the optimal viewing position for your device.
The Dual Clam Shell mount offers improved features and benefits to the Single Clam Shell by increasing the tilt, swivel
and rotation options. With the second clam shell, you can not only tilt the device up or down, but you can angle the
screen of the device slightly back towards the overhead guard leg for better visibility.
The width of the overhead guard leg will determine what size backer plate to use. The small backer plate is
recommended for overhead guard leg width ranging from 1.5" to 2.5". The larger backer plate is recommended for
overhead guard leg width ranging from 2.5" to 5.0".
Single Clam Shell with Small
Backer Plate
Single Clam Shell with Large
Backer Plate
Dual Clam with Small Backer Plate
Dual Clam with Large Backer Plate
Shown: Panasonic G1 Docking Station on a Dual Clam Shell
Shown: Panasonic M1 Docking Station on a Dual Clam Shell
Horizontal Extension Bracket
Overhead Guard Mounts
The Overhead Guard Mount attaches directly to the
overhead guard, allowing you to vertically mount your
device. The mounts come in four options:
• Short Overhead Guard Single Clam Shell – used
when mounting the device closer to the ceiling of the
overhead guard is required
• Short Overhead Guard Dual Clam Shell – also used
when a low-profile mount is required; this mount
has a second clam shell that provides additional
articulation
• Overhead Guard Clam Shell – used when you want
the device to extend further down off the overhead
guard for easier viewing, overhead guard leg extends
8” down from the top
The Clam Shell has a VESA 75mm, Gamber-Johnson 2x4,
NEC or AMPS hole patterns on it. All the overhead guard
mounts can be rotated 360°, giving the user the option
to position the device that fits
their needs.
The Horizontal Extension Bracket gives the user over 15" of horizontal
space from the inside of the overhead guard arm to mount a display
or device. The Horizontal Extension Bracket allows the system to be
configured for optimal user ergonomic configurations. The Horizontal
Extension Bracket is a superb solution for mounting heavier
computers and keyboards. The Horizontal Extension Bracket can be
used in conjunction with the Clam Shell with Small Plate or Dual Clam
Shell with Small Plate Mounts.
Horizontal Extension Bracket
Shown: Panasonic G1 Docking Station
Roll Formed Bracket
The Roll Formed Bracket is used to mount a device to a truck
that has a roll formed overhead guard leg. The Roll Formed
Bracket can be used with the Clam Shells (Small or Large),
Dual Clam Shells (Small or Large), Dual Clam Shell with 3" Arm
(Small or Large) or the Horizontal Extension Bracket.
Overhead Guard Mount
with Clam Shell
Shown: Panasonic M1 Docking Station on an Overhead Guard
Mount
Shown: Panasonic G1 Docking Station on an Overhead Guard
Mount
Short Overhead
Guard Mount with
Single Clam Shell
Short Overhead
Guard Mount with
Dual Clam Shell
Shown: Panasonic M1 Docking Station
Dual Clam Shells with 3" Arm (Small and Large Backer Plate)
This mount features a 3" Arm between the two Clam Shells, which
helps to bring the device closer to the driver. The arm adds an
additional swivel point, allowing you to position the device at the
optimal ergonomic position.
Dual Clam Shell
with 3" Arm Small
Backer Plate
Shown: Panasonic G1 Docking Station on Dual Clam
Shell with 3" Arm Mount
Roll Formed Bracket
Dual Clam Shell with
3" Arm Large Backer
Plate
2", 2.5" or 3" Diameter Tube Clamp
The Tube Clamp is used to mount a device to
a truck that has a tube style overhead guard
leg. The Tube Clamp can be used with the Clam
Shells (Small or Large), Dual Clam Shells (Small
or Large), Dual Clam Shell with 3" Arm (Small or
Large) or the Horizontal Extension Bracket. The
Tube Clamp allows the Clam Shell to mount in a
horizontal and vertical orientation.
2”, 2.5” or 3”
Diameter Tube
Clamp
Shown: Tube clamp with horizontal extension
M1, G1, X1 Enterprise Docking Stations
FZ-M1 (Windows) and FZ-B2 (Android™) Tablet
The 7-inch, rugged, workhorse you can drop in your pocket.
The Panasonic Toughpad® FZ-M1 and FZ-B2 are built to enable the missioncritical mobile worker productivity without compromise.
Barcode/Mobile Handheld
Computer Mounts
The mobile handheld computer
mounts attach directly to the
overhead guard leg, allowing you
to mount your device within easy
reach. The mount is designed to
be used with most scanners and
handheld computers (wired or
wireless).
TABCRUZER® FOR PANASONIC TOUGHPAD FZ-M1 AND FZ-B2 DOCKING STATIONS
Item number
Computer
compatibility
RF pass-through
Port replication
7160-0531-00-P
FZ-M1, FZ-B2
None
7160-0531-02-P
FZ-M1, FZ-B2
Dual RF (TNC)
Lite: powered USB 2.0 (2), ethernet,
power input DC
7160-0531-03-P
FZ-M1
None
7160-0531-04-P
FZ-M1
Dual RF (TNC)
Full: powered USB 3.0 (2), ethernet,
serial (1), HDMI, power input DC
FZ-G1 Tablet
More power for your toughest applications.
The 10.1-inch FZ-G1 pairs the field-tested, fully-rugged chassis of the original
with the latest, fourth-generation Intel® Core™ i5 vPro™. It has a host of
new features, like a glove-sensitive touch screen, a 20-hour hot-swappable
battery, integrated RFID, and much more.
Shown: Panasonic X1 on the Handheld Mount
Barcode Scanner/Mobile
Computer Mount - upper only
TABCRUZER FOR PANASONIC TOUGHPAD FZ-G1 THIN DOCKING STATION
Item number
RF pass-through
Port replication
7160-0487-00-P
None
7160-0487-02-P
Dual RF (TNC)
Fully powered USB 3.0 (2), ethernet, serial
(1), VGA, HDMI, power input DC
FZ-X1 (Android™) and FZ-E1(Windows) Handheld Tablet
Power-packed, pocket-sized, and tough as nails.
The Toughpad FZ-X1/E1 is the world’s most rugged 5-inch mobile handheld
computer and a whole lot more. For the first time, you can pair military-grade
toughness and enterprise-class mobile computing power.
PANASONIC TOUGHPAD FZ-X1 AND FZ-E1 POWERED CRADLE
Item number
Port replication
7160-0564-P
Power input DC
Barcode Scanner/Mobile
Computer Mount - upper and
lower
The mount comes in two options:
an upper-location-only mount or a
combination of upper-and-lowerlocation mount. What location
best ergonomically positions your
device for your need will determine
which mounting option you pick.
The combination mount has an
adjustable lower section that can
be moved into the users’ desired
position or locked in place, while
the upper section on both mounts
offers a quick accessibility to the
device using a slide-and-go motion.
The upper section has a forward
restraint to protect the IR lens from
damage and prevents the trigger
from being activated while in
motion.
Accessories
Handheld Barcode Scanner/Mobile
Computer Mount
Fits most handheld barcode scanners
Printer Mounts
Easily mount printers to the Overhead
Guard Leg
Keyboard Articulating
Arm with Mini Clevis
For use with any Clam Shell and Keyboard
attaches directly to the arm
Lockable Quick Release Universal
Keyboard Tray
Use with the Keyboard Articulating
Arm
Lind Power Supply
Isolated 12-32 VDC or 20-60 VDC for use with
Panasonic docking solutions
Universal Tablet Keyboard Mount
Combine a tablet docking station and
keyboard
Quick Release Mount
Allows computer or tablets mounted to any
Clam Shell to be easily removed from the
vehicle without tools
Overhead Guard Extension Sleeve
Allows the Overhead Guard Mount to
be lowered an additional 4.0"
Gamber-Johnson LLC
3001 Borham Ave., Stevens Point, WI 54481
Phone: 888.921.3309
email: [email protected]
www.gjforkliftmount.com
www.business.panasonic.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement