Dave Johnston Plant
PacifiCorp Energy
PacifiCorp Energy
Dave Johnston Power Plant
Wyoming
Lighting Upgrade Audit/Study
November 2013
Executive Summary
PacifiCorp Energy hired Evergreen Consulting Group to conduct a lighting audit at the Dave
Johnston plant located in Glenrock, Wyoming. Site visits were conducted on August 14th-16th,
2013 and the following 3-4 phase recommendations for lighting upgrades are contained in this
report.

T12 Lighting Upgrade: Typical 1.5” diameter fluorescent tubes (4’ or 8’ lengths, some Utubes) should be replaced with longer life, high performance T8 linear fluorescent.
Scope includes de-lamping most 4 and 3 lamp fixture due to the improved light output of
the retrofit kits. T-12 lamps are phasing out and will be more expensive to maintain both
on energy consumption and on maintenance. Project will improve “quality of light,”
reduce maintenance by 75 - 85 percent over current levels, and allow for some controls
in areas where fixtures do not need 24-hour operation (or occupancy). LED fixtures are
an option (or retrofit kits), but costs are more than the T8 technology with similar life of
lamps. There are approximately 1,133 T12 fixtures recommended for this upgrade.

Turbine Deck: Currently illuminated with 1,000-watt (W) metal halide lamps that have a
40 percent lamp lumen depreciation and a lamp life rated at 20,000 hours. Due to the
high mounting height and long life, LED high bays are recommended. LEDs also come
with long life typically at 60,000 hours or more. Due to directionality of the LED lamps,
uniformity is attained beyond standard fluorescent or high intensity discharge lamps
allowing for somewhat lower foot-candles but with better visibility in space. Project will
improve “quality of light,” reduce maintenance by 60 percent over current levels, and
allow for fixture mount occupancy sensors (if required). If taking in to account life cycle
cost and any incremental cost difference (between high intensity discharge and
fluorescent) LED should be considered for a long life cycle solution.

Industrial Fixtures: The primary fixtures are 175W metal halide or 150W high-pressure
sodium industrial low bay fixtures hanging throughout the entire facility. The
recommended upgrade is a LED retrofit kit where the bottom portion of the housing is
changed out on existing fixture. The new LED fixture is 78W and lasts approximately
60,000 hours (L70) compared to the existing fixtures 15,000 - 24,000-hour lamp life. In
addition to this specific location, these fixture types are typical at other PacifiCorp
Energy power plants, and for cost savings to PacifiCorp, it is recommended that a bulk
ordering agreement for the same fixture types be set up to share material orders in
similar breakouts for all locations.

Exterior fixtures are broken out as their own phase. This high intensity discharge fixture
can be upgraded with various fixture types. Some will match the typical low bay LED
retrofits (78W Type RLB1) while some will be similar to Type AL1, WP1-2, FL4-5, and
RW1 fixtures. Plant personal or contractor will determine fixture mounting hardware prior
to ordering as well as verify fixture types. All recommendations are for longer life LED
products to save on future maintenance.
Page 1
Page 1 of 103
Table 1: Breakout of Lighting Upgrades for phasing purposes
Recommended
Breakout
T-12 Lighting
Upgrade
Number of light
fixtures
Rough Budget $
kWh Savings
1,133
$124,100
517,785
Turbine Deck
86
$57,100
373,956
Industrial Fixtures*
2,943
$2,236,400
3,662,878
Exterior Lighting
345
$294,200
339,227
Totals
4,507**
$2,711,800
4,890,657
*Industrial fixtures represent 78W LED replacement fixtures and include lighting controls
**Estimated total does not include all light fixtures throughout the plant
Benefits of Recommendations
Why invest in lighting? The economics of the internal savings is not included in this report.
PacifiCorp is unable to utilize Rocky Mountain Power’s incentive unless they are physically
paying a utility bill with an eligible industrial rate. Additionally, the actual cost of energy (in
lighting tool) is not the sell rate to commercial/industrial customers. So, once internal rates for
power generation are applied, we don’t expect projects to net on “energy savings alone” under
2 years to make this an automatic capital investment. However, looking at the long-term benefits
there are significant values for investing in these recommended lighting upgrades:
1) The kWh (energy units) and kW (demand) are real and can be re-sold to PacifiCorp endusers
2) Maintenance savings for both hard and soft costs are significant. Recommendations
above should reduce 75 – 85 percent of the current lighting maintenance budget each
year for the next 10 years (and nominal increases thereafter).
3) Reduced safety risk to maintenance staff (minimizes access to restricted access
areas/heights/lifts and lighting over process equipment).
4) Quality of light: New technology improves the color, enhances visibility and human
comfort. Existing lighting has a color accuracy of 50 – 65 percent; recommended
lighting has a color accuracy of 80 – 90 percent.
5) Increases productivity and safety by providing clearer distinction in colors (e.g., wiring)
and small details of equipment, etc.
6) Computer glare is reduced especially in the office areas. Additionally, current IES
(illuminating Engineers Society) light level recommendations can be met in those offices.
7) Make power available for other equipment: These projects are base load reductions,
meaning power for panels and transformers are reduced and allow mores options to be
used for new connections/loads or equipment, besides reducing stress on existing
panels or overload situations.
8) Net payback, once included cost benefits factors above (especially adding the human
factors), should meet all PacifiCorp’s internal rates-of-returns to invest in all power
plants. This report cannot identify the physical dollars associated to all these internal
Page 2
Page 2 of 103
pieces to form a final financial calculation. But based in the nature, these power plants
are long-term facilities and even if basic energy savings only net paybacks look longer to
invest with more expensive LED technology, the secondary benefits on maintenance
and improve working environment should make these projects a high priority on capital
investments. The recommended technologies also provide 15 - 20 years equipment life
for new fixtures and 12 - 15 years of equipment life on retrofits (for existing fixtures)
before replacements or next capital investments would need to be reconsidered.
Lighting Audit Report
The Dave Johnston Power Plant located at 1591 Tank Farm Rd, Glenrock, WY is comprised of
four generating units with the total generating capability of 817+ megawatts. It has extensive
interior and exterior industrial grated levels. The plant turned 46 years old in 2013. Operating
hours are 24 hours a day, 365 days a year with the plant office operating from Monday-Friday.
A lighting audit for the Dave Johnston Power Plant was performed by Dan Kuhl, LC of
Evergreen Consulting Group. The entire facility consists of coal conveyer belts, mechanical,
service walkways, offices, labs, maintenance shops, generating units, cooling towers and other
miscellaneous buildings. The lighting audit encompasses all of Units 1-4 including every
common area. The majority of the facility consists of lower wattage 175W metal halide and
some high-pressure sodium low bays that provide general ambient lighting. Other wattages and
lamp types typical of an industrial power plant are in use but the 175W “plant standard” is the
most common with approximately 2,700+ units installed. Old T12 lamps are also prevalent
throughout the plant. These T12s with magnetic ballasts should be changed out in 2013 or first
quarter of 2014 as replacement lamps are getting harder to find and the costs are increasing.
It was observed that most of the existing lighting equipment is at end of life and will require
extensive maintenance or replacement in the near future. They have started installing some
new metal halide fixtures, and while this has helped improve the overall light levels, this
technology matches the existing inefficient lighting. The best option for continued replacement
of the existing lights (due to light loss, CRI, lamp life and maintenance), is new (or retrofit) LED
fixtures.
This facility has very significant energy savings opportunities. The savings are a good faith
estimate and can change depending upon what is actually installed. Final numbers can be
accounted for in the post-inspection process after installation is completed. We invite you to
take full advantage of this incentive to improve the energy efficiency of your facility.
Existing Foot-candle readings:
Area
Turbine Area
MIN
12
MAX
16
AVG
13
Page 3
Page 3 of 103
Recommendations
Detail Lighting Survey: Appendix B contains a large spreadsheet (known as Lighting Tool)
on each area baseline and proposed fixtures shown. Included in this report are five Lighting
tools:
1. One - master spreadsheet with all baseline opportunities (all fixtures surveyed).
2. Four – breakout spreadsheets (sub-sets or phases) that group the T12 fixtures, low
bay high intensity discharge (plant standard), turbine area, and exterior lighting.
Recommended Fixtures: Appendix C contains specification sheets of the typical fixture
type being recommended. No specific manufacturer is required and any equal alternatives
can be used.

De-lamping 4’ T12 to T8 retrofit kits: The typical 4’ T12 fixtures should be replaced
with 2-lamp T8 CEE high performance ballast/lamp de-lamping kits. These kits fit inside
the existing fixture housing and re-position the lamp holders for the new lamps and
optimizing how much light projected out of the fixture. They increase the efficiency of the
fixture using reflectors and lenses to give recommended light levels as needed for each
area of the offices. Plant area T12 are typical 8’ slim-line or high output fixture that will
either be de-lamped or retrofitted with 4’ T8 lamps using a “kit” which allows for easy
installation without removing the “body” of the fixture

Crouse Hinds – Currently the plant has over 2,700 low bay industrial fixtures using
either 175W metal halide or 150W high-pressure sodium. It is recommended to replace
these with a retrofit kit that uses the existing back box when retrofitting the fixture,
thereby reducing the labor time to replace. These retrofit kits are available from Dialight
or Crouse-Hinds (at the time of this report). Other manufactures may have an equal
product. Alternatives could be looked at as a cost saving measure only, which would be
a LED screw-in retrofit hybrid kit. This would save money but not provide the
“engineered” lighting pattern as described for the recommended retrofit option. Plant
would need to do their due-diligence before approving the LED screw-in option (test for
example).

LED High Bay fixtures: We strongly recommend the plant select a high quality LED
high bay fixture to replace the turbine high bay high intensity discharge lamps.
Maintenance reduction, long life, safety, and lighting quality are the drivers here.
Recently new fixtures designed specifically for high ceiling applications have been
introduced to the market and would meet the space requirements for light levels,
uniformity, and quality of light that the turbine area requires. It is recommended that the
plant review multiple products before choosing a fixture for this area.

Exterior fixtures: This area would receive a standard replacement with most products
changing to a new LED fixture. Time will need to be spent determining the proper
fixtures that use the correct optics, wattage, and fixture design. Since the market has
been using LED fixtures of this type for a few years now it has matured faster than other
LED sectors, driving the price down where the incremental cost difference between
existing technologies and LED are minimal.

Why CEE/DLC: The fixtures recommended above can be found on the Consortium for
Energy Efficiency (CEE) and Design Lights Consortium (DLC) listed fixtures. The utility
Page 4
Page 4 of 103
programs require these listed products for lamps/ballast and LED related products. Do
these not only protect the owner from lower performance products being installed but
also insure that they get the best available technology in the market for their buildings.
CEE uses NEMA (National Electrical Manufacturers Association) premium ballast
specification and lamp standards to identify the longest lasting and higher quality linear
fluorescent lamps (U-tube and 4’ lamps only). By ordering CEE listed products (there
are over 1000+), your lamp life and quality will be maximized while saving energy and
reducing maintenance costs. Estimated costs shown do include these products. Note:
For all interior T8 lamps, it is recommended to use long life 28W lamps (84,000
estimated hours). For all T8 ballasts, it is recommended to use program start in
conjunction with these same lamps. Program start ballasts, besides being recommended
where occupancy sensors are used, provide exact voltage and pre-heat the fluorescent
lamp cathode, which extends the life of the lamp.

DLC is a national list for LED fixtures and retrofit kits that provides minimum
performance standards to help identify less desirable products in the market. Because
LED is an emerging technology and has experienced early products failures, a national
standard was developed.
Recommended Maintenance and Life of Lighting: The primary fixtures are shown for
comparison on life of lamps compared to existing.

Existing T12 lighting at this location have an average lamp life of 12,000 - 20,000 hours
(based on size or brand of lamps). This is typically 1.5 to 2.5 years before replacement.

Recommended T8 lighting: Recommended new lamps (for burn out) replacing the T12
lamps have 84,000 hours or 9 years. Adding controls will extend these fixtures longer
than 9 years if operating 24 hours a day. Paying 1 - 2 dollars more for these lamps is
well worth the investment up front over the standard T8 lamps.

Existing 175W metal halide fixtures have a lamp life of 12,000 hours or 1.5 years
before they burn out.

Existing 150W high-pressure sodium fixtures have a lamp life of 24,000 hours or 2.8
years before they burn out.

Recommended LED fixtures have a useful (L70) life of 60,000+ hours or 7+ years.
Definition of “useful” is when the lumen output is at 70 percent of initial light output. LED
lamps will keep burning, provide light past this useful life, and therefore offer some
additional benefit over lamps that burn out; however, replacement/updates should be
considered at the 70 percent mark.

Existing 400W metal halide (high bay) fixtures have a lamp life of 20,000 hours or 2.8
years. Metal halide lamps have multiple drawbacks: poor color rendering, short lamp life
and steep lamp lumen depreciation (40% loss in light levels). Because of this, your plant
is experiencing excessive maintenance (cost/time) and low light levels from existing light
fixtures compared to today’s technology options.
Page 5
Page 5 of 103

Recommended LED high bay fixtures have 60,000 hours typical useful life (L70). You
also get a product that uses less energy to deliver useful lumens (light) on your task with
better uniformity than existing high intensity discharge as well as more light with this
direct source of lighting. A side benefit is that these turn on instantly rather than having a
5 to 10 minute wait for a fixture to come up to full brightness.
Costs/Budgets
Appendix D contains the detail cost breakout and shows all assumptions or logic for material
and labor by fixture type.
Costs are an estimate only (budgeting) and disregard any notations to any utility incentive or
dollar savings per year values in attached lighting tools. These values are only applicable if the
power plant was able to participate in the Rocky Mountain Power FinAnswer Express/wattsmart
Business incentive program. Any $ values (savings or incentive) shown in attachments should
be ignored; lighting tools are only used for calculating kW and kWh savings and identifying the
fixture types by space.
Logic for cost estimates:
Most fixtures were budgeted at one hour per installation. Some will take longer but some will
take less time. Labor cost was based at $80 an hour, which is a typical hourly wage for
electricians. Cost could be adjusted up or down depending on your evaluation of local labor
rates and the difficulty of each installation, spreadsheets are provided to make those
adjustments internally. Individual costs do not include such things as disposal, scaffolding,
permitting, safety requirements, or cost of shut down if needed, but other contingency amounts
were provided on a total that may be leveraged to cover some of these expenses. PacifiCorp
Energy may have other contingency factors not provided for in this report that should be added
as necessary based on location of site, security restriction time for contractors, and regional
bidding environment of local/remote resources availability.
Cost reduction options:
For the purposes of this lighting survey/audit and ease of installation, the Crouse Hinds retrofit
fixture was used for cost estimating. Other manufacturers (Dialight) have or may have a cost
effective alternative that may meet the owner’s needs with a lower installed cost than the
Crouse Hinds fixture. It is recommended that these options be researched or Evergreen
Consulting could assist in doing the research.
Upon request, we have re-designed the lighting fixture type for the main open turbine area when
compared to the original Unit 1 version (preliminary copies). A 511W LED high bay fixture was
recommended as it offers the best maintenance option and longer life desired by facility owners
and maintenance personal.
The costs can range dramatically on a project of this size and complexity. LEDs were
considered for the plant standard 175W metal halide general low bays and for most of the
1,000W metal halide high bays, as this would be the simplest and easiest to replace. Pricing is
higher for this product technology but should be considered for its ease of change out and
probability of substantial price reduction if pre-negotiated with the manufacturer prior to
purchase for multiple plants. We recommend arranging a national purchase agreement to
consolidate same fixture purchases for all power plants over a 1 - 2 year time period purchasing
window.
Page 6
Page 6 of 103
Appendix A
Fixture Summary Page
Page 7
Page 7 of 103
UT00001 gggggg
1
8
1
14
9
Fixture Legend
Fixture Codes
Ballast Codes
Code
Technology
Description
Code
Ballast Type
FCIT9
Fluorescent
Circleline T9
CEE IS
CEE Instant Start
FLE
Fluorescent
Linear Exit
CEE ISDIM
CEE Dimmable Instant Start
FUT12
Fluorescent
U Tube T12
CEE PS/PRSDIM
CEE Dimmable Program Start
FUT8
Fluorescent
U Tube T8
CEE RS/PRS
CEE Rapid Start
FUT8CEE
Fluorescent
U Tube CEE T8
IS
Instant Start
Efficient Instant Start
FCE
Fluorescent
Compact Exit
IS(E)
FCM
Fluorescent
Compact Medium Base
RS/PRS
Rapid/Program Start
FCP
Fluorescent
Compact Pin Base
RS/PRS(E)
Efficient Rapid/Program Start
FCPWP
Fluorescent
Compact Pin Base Wall Pack
MG
Magnetic
FCMG
Fluorescent
Compact Mogul Base
MG(E)
Efficient Magnetic
FCGU24
Fluorescent
Compact GU24
MGPH
Magnetic Pre-Heat
FLT8
Fluorescent
Linear T8
CWA
Constant Wattage Autotransformer
FLT8CEE
Fluorescent
Linear CEE T8
HIDLF
HID Low Freq Ballast
FLT8CEEHB
Fluorescent
Linear CEE T8 High Bay
INDN
Induction (Non-integral)
FLT10
Fluorescent
Linear T10
LR
Linear Reactor
Regulated Lag
FLT12
Fluorescent
Linear T12
RL
FLT12HO
Fluorescent
Linear T12HO
SCWA
FLT12VHO
Fluorescent
Linear T12VHO
FLT17
Fluorescent
Linear T17
Code
Description
FLT5
Fluorescent
Linear T5
L
Low (BF ≤ 0.85)
Super CWA
Ballast Factor Codes
FLT5HO
Fluorescent
Linear T5HO
N
Normal (0.85 < BF ≤ 1.0)
FLT5HOHB
Fluorescent
Linear T5HO High Bay
H
High (BF > 1.0)
FCCFL
Fluorescent
Cold Cathode
CEE L
CEE Low (BF ≤ 0.85)
CMH
HID
Ceramic Metal Halide
CEE N
CEE Normal (0.85 < BF ≤ 1.0)
HPS
HID
High Pressure Sodium
CEE H
CEE High (BF > 1.0)
Controls/Sensor Codes
MV
HID
Mercury Vapor
MH
HID
Metal Halide
Code
Description
MHPS
HID
Metal Halide Pulse Start
Integral
Integral
ICE
Incandescent
Exit
Occupancy
Occupancy
ICH
Incandescent
Halogen
Daylighting
Daylighting
ICMB
Incandescent
Medium Base
Ad. Daylighting
Advanced Daylighting
ICMG
Incandescent
Mogul Base
Time Clock
Time Clock
INRB
Induction
Remote-Ballasted
Dup. Occ
Duplicate Occupancy
INSB
Induction
Self-Ballasted
Dup. DL
Duplicate Daylighting
LEDSMC
LED
Surface Mount Canopy
Dup. Ad. DL
Duplicate Advanced Daylighting
LEDE
LED
Exit
Dup. TC
Duplicate Time Clock
LEDHB
LED
High Bay
LEDSI
LED
Integral Screw-in
Additional Information
LEDPM
LED
Pole Mount
LEDDL
LED
Recessed Downlight
RMP: DLC, Energy Star, LDL Links and Information
LEDWP
LED
Wall Pack
PP: DLC, Energy Star, LDL Links and Information
PE
Photoluminescent
Exit
Fixture Legend
Page 1
Page 8 of 103
Dave Johnston - All Lighting
Fixture Summary & Count
Fluorescent
FLT8CEE-28W x 2L x 4'-CEE RS/PRS CEE N
FLT8CEE-32W x 2L x 4'-CEE IS CEE H
FLT8CEE-28W x 4L x 4'-CEE RS/PRS CEE N
FCM-15W x 2L-MG
FLT8CEEHB-32W x 4L x 4'-CEE IS CEE H
FLT8CEEHB-32W x 6L x 4'-CEE IS CEE H
FLT12-75W x 2L x 8'-MG(E)
FCM-25W-MG
FLT8-17W x 3L x 2'-IS(E) L
HID
MH-175W-CWA
Induction
963
1
95
1
9
109
0
2
25
0
LED
Other
CUST: LEDHB-78W
CUST: LEDPM-40W
CUST: LEDSI-30W
CUST: LEDSI-14W
CUST: LED HB 511W
CUST: LEDHB-160W
CUST: LEDWP-109W
CUST: LEDWP-47W
CUST: LEDPM-120W
CUST: FLT8CEE-28W x 2L x 4'-CEE RS/PRSDIM N
CUST: LED Flood 121W
CUST: LEDWP-40W
CUST: LED Flood - 179W
CUST: LEDPM-105W
Controls
Integral
Occupancy
LT - DJ final - all lighting.xlsm
2736
3
131
85
136
36
38
20
11
13
41
3
34
15
56
87
11/20/2013
11 of 11
Page Page
9 of 103
Dave Johnston - T12 Phase
Fixture Summary & Count
Fluorescent
FLT8CEE-28W x 2L x 4'-CEE RS/PRS CEE N
FLT8CEE-28W x 4L x 4'-CEE RS/PRS CEE N
FLT8CEEHB-32W x 6L x 4'-CEE IS CEE H
FLT12-75W x 2L x 8'-MG(E)
FLT8-17W x 3L x 2'-IS(E) L
HID
960
95
40
0
25
Induction
LED
Other
CUST: FLT8CEE-28W x 2L x 4'-CEE RS/PRSDIM N
Controls
Occupancy
Integral
LT - DJ final - T12.xlsm
11/20/2013
13
87
6
Page
1 of 1
Page 10 of
103
Dave Johnston - Turbine Phase
Fixture Summary & Count
Fluorescent
FLT8CEEHB-32W x 6L x 4'-CEE IS CEE H
HID
10
Induction
LED
LEDHB-160W
Other
CUST: LEDHB-511W
Controls
LT - DJ final - Turbine.xlsm
10
66
11/20/2013
Page
3 of 3
Page 11 of
103
Dave Johnston - Industrial Phase
Fixture Summary & Count
Fluorescent
FLT8CEE-28W x 2L x 4'-CEE RS/PRS CEE N
FLT8CEE-32W x 2L x 4'-CEE IS CEE H
FCM-15W x 2L-MG
FLT8CEEHB-32W x 4L x 4'-CEE IS CEE H
FLT8CEEHB-32W x 6L x 4'-CEE IS CEE H
FCM-25W-MG
HID
MH-175W-CWA
Induction
0
LED
LEDHB-160W
LEDWP-40W
26
3
Other
CUST: LEDHB-78W
CUST: LEDPM-40W
CUST: LEDSI-30W
CUST: LEDSI-14W
CUST: LEDHB-511W
CUST: LEDWP-109W
CUST: LEDWP-47W
Controls
Integral
LT - DJ final - Industrial.xlsm
3
1
1
9
59
2
2669
3
19
76
14
38
20
50
11/20/2013
Page
6 of 6
Page 12 of
103
Dave Johnston - Exterior Phase
Fixture Summary & Count
Fluorescent
HID
Induction
LED
Other
CUST: LEDSI-30W
CUST: LEDHB-78W
CUST: LEDPM-120W
CUST: LED Flood 121W
CUST: LEDSI-14W
CUST: LED HB 511W
CUST: LED Flood - 179W
CUST: LEDPM-105W
112
67
11
41
9
56
34
15
Controls
LT - DJ final - Exterior.xlsm
11/20/2013
Page
1 of 1
Page 13 of
103
Appendix B
Lighting Tools
Page 8
Page 14 of 103
Survey Notes from Dave Johnston Power Plant, 9-15-13, Dan Kuhl
1. 175W MH the most common lamp/fixture type
2. Operating hours – 24/7 for plant and 12 hrs. for office
3. Customer has installed some Dialite (LED fixture/lamp) as samples, including a Dialite
retrofit kit for the Crouse Hinds. Note: Dialite has a retrofit kit for the Crouse Hinds that fits
on their back box. See picture
4. Crouse Hinds low bay general illumination is the most common fixture in the plant. Any
retrofit product needs to fit on the Crouse Hinds back box to make it easy to install.
5. Need shielded T8 lamps mounted below 8‘ MH. Verify before ordering lamps.
6. Some Low bay general lights by Crouse Hinds are on 24-hour EM circuits. CFL installed in
these fixtures
7. Some areas are under lit or without lights. Add LED version of Crouse Hinds or equal
8. Provide 5% extra parts as part of the fixture order. Lenses, sockets, drivers, ballast, etc…
(fixture repairs during upgrades)
9. Money saving Tip: Negotiate 2 yr. buying agreement for all plant standard retrofit fixtures
(types).
10. Buy new LED exits as needed and have plant self-install. Example buy qty. 25 exit and install
these until all gone. Then buy another batch. Utility incentives available.
11. Buy LED outdoor wall packs same as above
12. Turbine room: 12 to 16FC……13-14 FC average. Under lit and not at IES recommended light
levels
13. Power Plant staff to verify all mounting hardware needed to install any new or retrofit
fixtures.
14. Unusual amount of T12 and HID lamps not working. Appears many lamps and fixtures are at
end of life. Proposed fixtures must consider maintenance factors and longer lifes.
15. Mock-up some offices to verify lamp wattage (28W or 32W T8’s) and low ballast factors for
appropriate light levels. Consider trying High Performance low glare retrofit kits (lensed and
reflector delamping kits make fixture 80+% efficient on light output vs. the 50-60% of
existing fixtures)
16. Suggest plant standardize on 28W T8 long life lamps (84,000 hours). Confirm lamp lumens
are adequate for most applications. Any high Bay fixtures should use 32W T8’s.
Page 15 of 103
Wyoming FinAnswer Express Program
07/01/13 Effective Date
Project ID
You Can Now Use The Project
Information Tab
Lighting Coordinator
Dan Kuhl
Tool Prepared by
Dan Kuhl
Project Manager
V 070113.5.3
Customer Information
Processing Information
Construction Type
Project Name Dave Johnston Power Plant - Combined Project
Installation Address 1591 Tank Farm Rd
City, State, Zip Glenrock
WY
82637
Phone, Email (307) 995-5193
[email protected]
Account, Meter, Rate
48T
Elect. User
Business Type
Material
Labor
Other
Total Project Cost
$2,376,100.00
$318,700.00
$17,000.00
$2,711,800.00
Whole Building
Allowed Wattage
720,000
Calculation Method
1 Other
FT
Contact
Other
EEA Participant
Business Name
1,200,000
0.60
W/FT
2
W/FT 2
FT
2
W/FT
2
FT
2
W/FT
2
FT
2
W/FT
2
FT 2 1,200,000
Other
0.60
W/FT 2
Lighting Operation Schedule
Address
City, State, Zip
Phone, Email
Payee Information
Incentive Should Be Addressed To:
2
FT 2
Building Owner
Contractor Information
Installation Address
Business Name PacifiCorp Energy
Attention Brian Gangl
Check Reference
Address 1591 Tank Farm Rd
City, State, Zip Glenrock
Preliminary
Space Type & Size
Contact, Title Brian Gangl
Acct Holder
Stage
Retrofit
Project Cost
Business Name PacifiCorp Energy
Participant is:
Account Manager
WY
82637
Eligibility Information
# of Holidays Closed?
Day
A
B
0
Mon
3.0
10.0
Op Weeks Per Year
Tue
3.0
10.0
52
Wed
3.0
10.0
"S" is for a seasonal
Add/Edit
operational
schedule
Thu
3.0
10.0
Fri
3.0
10.0
S is for 0 hrs/year
Sat
3.0
4.0
X is for 8760 hrs/year
Sun
3.0
0.0
Y is for 4380 hrs/year
Total
1,095
2,816
C
D
E
Additional Information
Business Name
Address
City, State, Zip
Account #
Meter Base #, Rate
LT - DJ final - all lighting.xlsm
Office Use Only
Import
Existing
Project
11/21/2013
EEA
Participant
Info
Email
Coordinator
Lighting
Catalog
LED
Policy
Report A
Problem
Page 1
Page 16 of 103
-10
-9
-8
Category
-7
-6
-5
-4
-3
-2
Add Fixture
Fixture
-1
Incentive
Remove Fixture
Lamp
Savings Information
Clear Filter
Lamp (W)
Lamp Qty
4,890,657 kWh Saved
Per Year
Build Fixture
Ballast
Reset
Factor
78W - CUST: LEDHB-78W
Lighting Power Density
51.7%
0.74 Existing
Better Than Code
0.29 Proposed
LPD
Standard Incentive (16.0% of Cost Paid By Incentive)
Preliminary
Exterior
Schedule
Pre-Inspection
Agreement Needed
Dave Johnston Power Plant - Combined Project
247 Out Of 264 Lines Used
Line Number
Preliminary
0.60 Code
Custom Fixture
1
↓↓Project Tracking↓↓
Existing
Space Description
Unit 4
Fixture
4556
Qty
0
Controls
Interior
882,333
Exterior
130,290
Fixture
Wattage
Space
Wattage
Proposed
Fixture
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
CUST: LEDHB-78W
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
Interior
4507
143
Exterior
348,141
51,270
Contracted
Post-Inspection
Final Review Needed
Fixture
Wattage
Space
Wattage
1
49
49
Vapor Tight -
2
78
156
Crouse Hines - Type RLB1
49
98
Surface Vapor Tight
Qty
Controls
↓↓Project Notes↓↓
2
X Elevator Room
ICMB-150W
1
150
150
3
X Drum Room
MH-175W-CWA
2
215
430
4
X Penthouse
ICMB-100W
2
72
144
5
X RCM
ICMB-200W
3
200
600
CUST: LEDPM-40W
3
40
120
6
ICMB-150W
1
150
150
30
30
MH-175W-CWA
1
215
215
1
73
73
Vapor Tight
ICMB-100W
ICMB-100W
5
9
72
72
360
648
CUST: LEDSI-30W
FLT8CEE-32W x 2L x 4'-CEE IS
CEE H
CUST: LEDSI-14W
CUST: LEDSI-14W
1
8
9
X West Drum Room
West Drum Room
X
Level 8
X Level 8 Under Boiler
X Level 8 Jelly Jar
Pipe Mount LED Industrial
Refracture Pack- Type RLB1
Jelly Jar - Type VTK
3
9
14
14
42
126
10
X Level 8
MH-175W-CWA
198
215
42,570
CUST: LEDHB-78W
198
78
15,444
11
MH-175W-CWA
200
215
43,000
CUST: LEDHB-78W
200
78
15,600
MH-175W-CWA
50
215
10,750
CUST: LEDHB-78W
50
78
3,900
Type RLB1
13
14
X Level 8
55 Conveyors, Coal
X
MCC
X 55 "B" Conveyor
X 55 "B" Conveyor
LED lamp
LED lamp
split line in 2 so savings- Type
RLB1
would calculate
MH-175W-CWA
MH-175W-CWA
23
23
215
215
4,945
4,945
23
23
78
78
1,794
1,794
Fixture Mount OC -Type RLB1
Every Other Fixture - Type RLB1
15
X Overall Lunch Room FLT12-34W x 2L x 4'-MG(E)
3
72
216
3
49
147
Lamp and Ballast
16
17
18
X DA - 6
Level 5
X Old Scrubber
Old Scrubber Master
X
Level
Old Scrubber Master
X
Level
3 1/2 Outled, ODD
Feeder Deck,
X
Abandoned Stairs,
FD & ID Fans
X FD & ID Fans
MH-175W-CWA
4
215
860
CUST: LEDHB-78W
CUST: LEDHB-78W
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
CUST: LEDHB-78W
4
78
312
Type RLB1
MH-175W-CWA
13
215
2,795
CUST: LEDHB-78W
13
78
1,014
Type RLB1
ICMB-100W
12
72
864
CUST: LEDSI-14W
12
14
168
LED lamp
HPS-250W
3
295
885
CUST: LEDHB-78W
3
78
234
Type RLB1
MH-175W-CWA
47
215
10,105
CUST: LEDHB-78W
47
78
3,666
Type RLB1
HPS-250W
4
295
1,180
CUST: LEDHB-78W
4
78
312
Type RLB1
7
12
19
20
21
22
LT - DJ final - all lighting.xlsm
11/20/2013
11:37 PM
2
Integral
Integral
Page 17 of Page
1032 of 11
24
49
1,176
Lamp and Ballast
71,280
4,650
6,480
4,580
69,875
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
CUST: LED HB 511W
CUST: LEDHB-160W
CUST: LED HB 511W
CUST: LEDHB-160W
CUST: LEDHB-78W
66
10
6
10
325
511
160
511
160
78
33,726
1,600
3,066
1,600
25,350
Type HB6
Type HB1 - 160W
Type HB6
Type HB1 -160W
Type RLB1
215
188
1,080
72
28,810
11,844
8,640
864
CUST: LEDHB-78W
CUST: LEDHB-78W
CUST: LED HB 511W
CUST: LEDSI-14W
134
63
8
12
78
78
511
14
10,452
4,914
4,088
168
Type RLB1
Type RLB1
Type HB6
LED lamp
59
18
107
12
112
215
188
200
150
150
12,685
3,384
21,400
1,800
16,800
CUST: LEDHB-78W
CUST: LEDHB-78W
CUST: LEDHB-78W
CUST: LEDSI-30W
CUST: LEDSI-30W
59
18
107
12
112
78
78
78
30
30
4,602
1,404
8,346
360
3,360
Type RLB1
Type RLB1
Type RLB1
LED lamp
LED lamp
MH-175W-CWA
37
215
7,955
CUST: LEDHB-78W
37
78
2,886
Type RLB1
MH-400W-CWA
HPS-150W
MH-175W-CWA
MH-175W-CWA
HPS-250W
MH-400W-CWA
6
300
200
245
26
10
458
188
215
215
295
458
2,748
56,400
43,000
52,675
7,670
4,580
CUST: LEDHB-160W
CUST: LEDHB-78W
CUST: LEDHB-78W
CUST: LEDHB-78W
CUST: LEDWP-109W
CUST: LEDHB-160W
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 4L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 4L x 4'-CEE
RS/PRS CEE N
CUST: LEDWP-47W
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
6
300
200
245
26
10
160
78
78
78
109
160
960
23,400
15,600
19,110
2,834
1,600
Type HB1-160W
Type RLB1
Type RLB1
Type RLB1
Type WP1
Type HB1-160W
42
49
2,058
L&B TYPE BNLO1, TYPE L2
12
99
1,188
Type SK2, BNLO2, L2
22
99
2,178
Type SK2, BNLO2, L2
8
47
376
Type WP1
49
98
L&B TYPE BNLO1, TYPE L2
CUST: LEDPM-120W
11
120
1,320
5
5
78
78
390
390
23
X # 4 Control Area
FLT12-34W x 4L x 4'-2 MG(E)
24
144
3,456
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39 +
X
X
X
X
X
Turbine Deck
Turbine Deck
Unit #3 Bldg
Unit #3 Bldg
Unit #3 Bldg
Unit #2
Unit #2
Unit #2 & RLM
Sports Light Flood
Jelly Jars
Unit #1
Unit #1
Unit #1
RLM
Jelly Jars
Star Sign
Coal Belt between #1
& #2
MH-1000W-CWA
HPS-400W
MH-1000W-CWA
MH-400W-CWA
MH-175W-CWA
66
10
6
10
325
1,080
465
1,080
458
215
MH-175W-CWA
HPS-150W
MH-1000W-CWA
ICMB-100W
134
63
8
12
MH-175W-CWA
HPS-150W
ICMB-200W
ICMB-150W
ICMB-150W
Sports Lights
Basement
Unit #1
Unit #1
Unit #1
Unit #1
X
X
X
X
X
X
X
X
A
40 + X
41
42
43
44
45
46
47
X
X
X
X
X
X
48
X Unit #1
FLT12-34W x 2L x 4'-MG(E)
42
72
3,024
49
X Unit #1
FLT12HO-95W x 2L x 8'-MG(E)
12
207
2,484
50
X Engineering Office
FLT12HO-95W x 2L x 8'-MG(E)
22
207
4,554
51
X Shop Basement
MH-1000W-CWA
8
1,080
8,640
52
X Restrooms
FLT12-34W x 4L x 4'-2 MG(E)
2
144
288
54 + Y Pole Lights-Exterior
HPS-400W
11
465
5,115
55
56
57
Mezzanine
X Switch Gear
X Generator Pit
MH-175W-CWA
HPS-150W
5
5
215
188
1,075
940
58
X Lunch Room
FLT12-34W x 2L x 4'-MG(E)
11
72
59
X Lunch Room
FLT12-34W x 2L x 4'-MG(E)
10
72
60
X
FLT12HO-95W x 2L x 8'-MG(E)
5
207
61
X Lab
FLT12-34W x 4L x 4'-2 MG(E)
14
144
62
X Lab
FLT12-34W x 3L x 4'-2 MG(E)
2
115
63
X Lab
FLT12-34W x 3L x 4'-MG(E)
20
115
53
Parking Lot-Exterior
#3 Switch Gear &
Lab
LT - DJ final - all lighting.xlsm
CUST: LEDHB-78W
CUST: LEDHB-78W
FLT8CEE-28W x 2L x 4'-CEE
792
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
720
RS/PRS CEE N
FLT8CEE-28W x 4L x 4'-CEE
1,035
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
2,016
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
230
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
2,300
RS/PRS CEE N
11/20/2013
11:37 PM
2
Occupancy
Type RW1
Type RLB1
Type RLB1
Wireless Ceiling OC-Lamp and
Ballast.
Wireless Ceiling OC-Lamp and
Ballast
10
Occupancy
49
490
11
Occupancy
49
539
5
99
495
Type SK2, BNLO2, L2
14
49
686
L&B TYPE BNLO1, TYPE L2
2
49
98
L&B TYPE BNLO1, TYPE L2
20
49
980
L&B TYPE BNLO1, TYPE L2
Page 18 of Page
1033 of 11
64
Unit #4 Mezzanine
65
X Switch Gear
FLT12-34W x 2L x 4'-MG(E)
7
72
66
X Switch Gear
FLT12-34W x 2L x 4'-MG(E)
29
72
67
X Mezzanine
FLT12-34W x 2L x 4'-MG(E)
26
72
68
69
70
X Mezzanine
X Mezzanine
X Mezzanine
HPS-250W
MH-175W-CWA
HPS-150W
9
76
70
295
215
188
71
X AQC Bldg
FLT12-34W x 2L x 4'-MG(E)
11
72
72
X Floc Bldg
MH-175W-CWA
10
215
73
X Insulator Shop
FLT12-34W x 4L x 4'-2 MG(E)
10
144
74
X Insulator Shop
FLT12-34W x 2L x 4'-MG(E)
6
72
75
76
X Insulator Shop
X Training Bldg
MH-175W-CWA
CUST: ICMB-120W
4
1
215
120
77
X Training Bldg
FLT12-34W x 2L x 4'-MG(E)
10
72
78
X Training Bldg
FLT12-34W x 2L x 4'-MG(E)
1
72
79
X Men's Restroom
FLT12-34W x 2L x 4'-MG(E)
2
72
80
X Women's Restroom
FLT12-34W x 2L x 4'-MG(E)
2
72
81
X Utility Room
FLT12-34W x 2L x 4'-MG(E)
4
72
82
X Training Library
FLT12-34W x 4L x 4'-2 MG(E)
4
144
83
X Small Office
FLT12-34W x 4L x 4'-2 MG(E)
2
144
84
X Break Area
FLT12-34W x 4L x 4'-2 MG(E)
2
144
85
X Class Room A
FLT12-34W x 4L x 4'-2 MG(E)
12
144
86
X Bob Miller Office
FLT12-34W x 4L x 4'-2 MG(E)
2
144
87
X Tech Training
FLT12-34W x 4L x 4'-2 MG(E)
2
144
88
X Sim Room
FLT12-34W x 4L x 4'-2 MG(E)
4
144
89
X Class Room B
FLT12-34W x 4L x 4'-2 MG(E)
13
144
90
X Rob McComas
FLT12-34W x 4L x 4'-2 MG(E)
1
144
91
X Store Room
FLT12-34W x 4L x 4'-2 MG(E)
1
144
92
Computer Training
X
Lab
FLT12-34W x 4L x 4'-2 MG(E)
9
144
93
X Hallway
FLT12-34W x 4L x 4'-2 MG(E)
1
144
94
X Mine Garage
HPS-150W
2
188
LT - DJ final - all lighting.xlsm
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
2,088
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
1,872
RS/PRS CEE N
2,655
CUST: LEDWP-109W
16,340
CUST: LEDHB-78W
13,160
CUST: LEDHB-78W
FLT8CEE-28W x 2L x 4'-CEE
792
RS/PRS CEE N
2,150
CUST: LEDHB-78W
FLT8CEE-28W x 2L x 4'-CEE
1,440
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
432
RS/PRS CEE N
860
CUST: LEDWP-47W
120
FCM-15W x 2L-MG
FLT8CEE-28W x 2L x 4'-CEE
720
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
72
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
144
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
144
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
288
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
576
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
288
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
288
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
1,728
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
288
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
288
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
576
RS/PRS CEE N
CUST: FLT8CEE-28W x 2L x 4'1,872
CEE RS/PRSDIM N
FLT8CEE-28W x 2L x 4'-CEE
144
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
144
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
1,296
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
144
RS/PRS CEE N
FLT8CEEHB-32W x 4L x 4'-CEE
376
IS CEE H
11/20/2013
11:37 PM
504
7
49
343
L&B TYPE BNLO1, TYPE L2
29
49
1,421
L&B TYPE BNLO1, TYPE L2
26
49
1,274
L&B TYPE BNLO1, TYPE L2
9
76
70
109
78
78
981
5,928
5,460
Type WP2
Type RLB1
Type RLB1
11
49
539
L&B TYPE BNLO1, TYPE L2
10
78
780
Type RLB1
10
49
490
L&B TYPE BNLO1, TYPE L2
6
49
294
L&B TYPE BNLO1, TYPE L2
4
1
47
30
188
30
Type WP1
LED lamp
10
49
490
2' X 2' U Lamps
1
49
49
L&B TYPE BNLO1, TYPE L2
49
98
L&B TYPE BNLO1, TYPE L2
49
98
L&B TYPE BNLO1, TYPE L2
2
Integral
Occupancy
2
4
Occupancy
49
196
L&B TYPE BNLO1, TYPE L2
4
Occupancy
49
196
L&B TYPE BNLO1, TYPE L2
2
Occupancy
49
98
L&B TYPE BNLO1, TYPE L2
2
49
98
L&B TYPE BNLO1, TYPE L2
12
49
588
L&B TYPE BNLO1, TYPE L2
2
49
98
L&B TYPE BNLO1, TYPE L2
2
49
98
L&B TYPE BNLO1, TYPE L2
4
Occupancy
49
196
L&B TYPE BNLO1, TYPE L2
13
Occupancy
49
637
L&B TYPE BNLO1, TYPE L2
1
49
49
L&B TYPE BNLO1, TYPE L2
1
49
49
L&B TYPE BNLO1, TYPE L2
49
441
L&B TYPE BNLO1, TYPE L2
1
49
49
L&B TYPE BNLO1, TYPE L2
1
142
142
Remove both incandescent fixtures.
9
Occupancy
Page 19 of Page
1034 of 11
95
X Storage
MH-175W-CWA
5
215
1,075
96
X Storage
MH-250W-CWA
2
295
590
97
X Repair Shop
MH-175W-CWA
2
215
430
98
X Repair Shop
MH-1000W-CWA
6
1,080
6,480
99
X Repair Shop
HPS-400W
6
465
2,790
100
X Repair Shop
MH-1000W-CWA
1
1,080
1,080
101
X Repair Shop
ICMG-500W
4
500
2,000
102
X Repair Shop
MH-400W-CWA
2
458
916
103
X Repair Shop
FLT12-34W x 4L x 4'-2 MG(E)
12
144
1,728
104
X Truck Repair Bays
MH-175W-CWA
3
215
645
105
X Stock Room
FLT12-75W x 2L x 8'-MG(E)
2
123
246
106
X Stock Room
FLT12-75W x 2L x 8'-MG(E)
1
123
123
107
X Stock Room
FLT12-34W x 2L x 4'-MG(E)
4
72
288
108
X Locker Room
FLT12-34W x 2L x 4'-MG(E)
4
72
288
109
X Locker Room
FLT12-34W x 2L x 4'-MG(E)
5
72
360
110
X Upstairs Office
FLT12-34W x 2L x 4'-MG(E)
3
72
216
111
X Upstairs Break Room FLT12-34W x 2L x 4'-MG(E)
8
72
576
112
X Upstairs Office
4
72
288
10
465
4,650
113 + X
114
FLT12-34W x 2L x 4'-MG(E)
Outside of BldgHPS-400W
Exterior
Unit #1 & #2 Cooling
Tower
X MCC Room
FLT12-34W x 2L x 4'-MG(E)
16
72
1,152
116
117
118
119
X Under Grate - MCC
X MCC Bldg
Precipitator Bldg
X Unit #1 & #2
MH-250W-CWA
MH-175W-CWA
3
6
295
215
885
1,290
MH-175W-CWA
98
215
21,070
120
X Penthouse
FLT12-34W x 2L x 4'-MG(E)
16
72
1,152
121 + Y Penthouse - Outdoor MH-175W-CWA
Penthouse 122
X
FLT12-34W x 2L x 4'-MG(E)
Communication
123
X Hopper Level
MH-175W-CWA
8
215
1,720
2
72
144
60
215
12,900
124
X Unit #1 & #2
FLT12-34W x 2L x 4'-MG(E)
80
72
5,760
125
X Ground Floor
MH-175W-CWA
18
215
3,870
4
Integral
142
568
4
Integral
New -2 Lamp Strip fixture, TYPE
S1 & TYPE L1
New -2 Lamp Strip fixture, TYPE
S1 & TYPE L1
Type WP1
142
568
2
47
94
5
213
1,065
FHE Series -Type EHB3
5
213
1,065
FHE Series- Type EHB3
1
213
213
FHE Series- Type EHB3
5
213
1,065
FHE Series- Type EHB3
1
213
213
FHE Series-Type EHB3
9
213
1,917
FHE Series- Type EHB3
0
215
0
2
99
198
0
123
0
Remove Three 175w MH
Wire Body Kit-Type SK2, BNLO2,
L2
Remove One 2L F96 T12
Wireless Ceiling OC-Lamp And
Ballast - TYPE BNLO2 & L2
4
Occupancy
99
396
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
4
Occupancy
49
196
3-Way Occ sensors wireless- Lamp
and Ballast - TYPE BNLO1 & L2
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
5
Occupancy
49
245
3-Way Occ sensors wireless- Lamp
and Ballast - TYPE BNLO1 & L2
3
Occupancy
49
147
8
Occupancy
49
392
4
Occupancy
49
196
10
121
1,210
16
49
784
3
6
109
47
327
282
98
78
7,644
16
49
784
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
115
LT - DJ final - all lighting.xlsm
FLT8CEEHB-32W x 4L x 4'-CEE
IS CEE H
FLT8CEEHB-32W x 4L x 4'-CEE
IS CEE H
CUST: LEDWP-47W
FLT8CEEHB-32W x 6L x 4'-CEE
IS CEE H
FLT8CEEHB-32W x 6L x 4'-CEE
IS CEE H
FLT8CEEHB-32W x 6L x 4'-CEE
IS CEE H
FLT8CEEHB-32W x 6L x 4'-CEE
IS CEE H
FLT8CEEHB-32W x 6L x 4'-CEE
IS CEE H
FLT8CEEHB-32W x 6L x 4'-CEE
IS CEE H
MH-175W-CWA
FLT8CEE-28W x 4L x 4'-CEE
RS/PRS CEE N
FLT12-75W x 2L x 8'-MG(E)
FLT8CEE-28W x 4L x 4'-CEE
RS/PRS CEE N
CUST: LED Flood 121W
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
CUST: LEDWP-109W
CUST: LEDWP-47W
CUST: LEDHB-78W
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
CUST: LEDHB-78W
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
CUST: LEDHB-78W
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
CUST: LEDHB-78W
11/20/2013
11:37 PM
Wireless Ceiling OC -Lamp and
Ballast - TYPE BNLO1 & L2
Wireless Ceiling OC -Lamp and
Ballast - TYPE BNLO1 & L2
Wall Occ Sensor- L&B - TYPE
BNLO1 & L2
Flood- Type FL4
Vapor Tight wo/ lens -Lamp and
Ballast - TYPE BNLO1 & L2
Type WP2
Type WP1
Type RLB1
L&B TYPE BNLO1, TYPE L2
8
78
624
Type RLB1
2
49
98
L&B TYPE BNLO1, TYPE L2
60
78
4,680
Type RLB1
80
49
3,920
L&B TYPE BNLO1, TYPE L2
18
78
1,404
Type RLB1
Page 20 of Page
1035 of 11
126
X
Diesel Generating
Room
ICMB-200W
2
200
400
ICMB-200W
0
200
0
Remove two 200w Incandescents
3
49
147
Type SK2, BNLO1, L2
3
78
234
Type RLB1
FLT12-75W x 8'-MG(E)
3
75
225
X Diesel Fire Pump
River Intake 129 + Y
Outdoors
130
X Chlorine Building
Chlorine Building 131
X
Side Two RLM
MH-175W-CWA
3
215
645
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
CUST: LEDHB-78W
HPS-150W
19
188
3,572
CUST: LEDHB-78W
19
78
1,482
Type RLB1
ICMB-200W
4
200
800
CUST: LEDSI-30W
4
30
120
Type VTK
ICMB-200W
2
200
400
CUST: LEDSI-30W
2
30
60
Type VTK
132
X Fire Pump House
MH-175W-CWA
6
215
1,290
6
213
1,278
Consider Not Changing
133
X Turbine Shed
MH-175W-CWA
10
215
2,150
5
213
1,065
FHE Series- Type EHB3
134
X Turbine Shed
MH-250W-CWA
7
295
2,065
5
213
1,065
FHE Series- Type EHB3
2
49
98
L&B TYPE BNLO1, TYPE L2
13
49
637
L&B TYPE BNLO1, TYPE L2
49
98
Wall Occ Sensor- Lamp and Ballast
- BNLO1 & L2
1
49
49
L&B TYPE BNLO1, TYPE L2
1
49
49
L&B TYPE BNLO1, TYPE L2
127
X RLM
128
135
Admin Bldg - 1st
Floor
136
X Entry
FLT12-34W x 2L x 4'-MG(E)
2
72
137
X Hallway
FLT12-34W x 4L x 4'-2 MG(E)
13
144
138
Break Room X
Kitchen
FLT12-34W x 4L x 4'-2 MG(E)
2
144
139
X Men's Restroom
FLT12-34W x 4L x 4'-2 MG(E)
1
144
140
X Women's Restroom
FLT12-34W x 4L x 4'-2 MG(E)
1
144
141
X Paula Edberg
FLT12-34W x 4L x 4'-2 MG(E)
4
144
142
X Jamie Gibson
FLT12-34W x 4L x 4'-2 MG(E)
4
144
143
X Tory Gear
FLT12-34W x 4L x 4'-2 MG(E)
4
144
144
X Arly Frye
FLT12-34W x 4L x 4'-2 MG(E)
4
144
FLT12-34W x 4L x 4'-2 MG(E)
10
144
FLT12-34W x 4L x 4'-2 MG(E)
10
144
145
146
Hallwy, Office
X
Procurement Dept.
Open Office, Small
X
Office
147
X Carole Newell
FLT12-34W x 4L x 4'-2 MG(E)
2
144
148
X Mark Wasinger
FLT12-34W x 4L x 4'-2 MG(E)
4
144
149
X Supplies Room
FLT12-34W x 4L x 4'-2 MG(E)
1
144
150
X Karl Eighmy
FLT12-34W x 4L x 4'-2 MG(E)
4
144
151
X Testing Room
FLT12-34W x 4L x 4'-2 MG(E)
4
144
152
X Electrical Room
ICMB-100W
2
72
153
X Training Room
FLT12-34W x 4L x 4'-2 MG(E)
6
144
154
X Training Room
FLT12-34W x 4L x 4'-2 MG(E)
6
144
LT - DJ final - all lighting.xlsm
FLT8CEEHB-32W x 6L x 4'-CEE
IS CEE H
FLT8CEEHB-32W x 6L x 4'-CEE
IS CEE H
FLT8CEEHB-32W x 6L x 4'-CEE
IS CEE H
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
1,872
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
288
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
144
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
144
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
576
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
576
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
576
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
576
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
1,440
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
1,440
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
288
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
576
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
144
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
576
RS/PRS CEE N
FLT8CEE-28W x 4L x 4'-CEE
576
RS/PRS CEE N
144
FCM-25W-MG
FLT8CEE-28W x 2L x 4'-CEE
864
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
864
RS/PRS CEE N
11/20/2013
11:37 PM
144
2
Occupancy
Wall Occ Sensor- Lamp and Ballast
- BNLO1 & L2
Wall Occ Sensor- Lamp and Ballast
- BNLO1 & L2
Wall Occ Sensor- Lamp and Ballast
- BNLO1 & L2
Wall Occ Sensor- Lamp and Ballast
- BNLO1 & L2
4
Occupancy
49
196
4
Occupancy
49
196
4
Occupancy
49
196
4
Occupancy
49
196
10
49
490
L&B TYPE BNLO1, TYPE L2
10
49
490
L&B TYPE BNLO1, TYPE L2
Wall Occ Sensor- Lamp and Ballast
- BNLO1 & L2
Wall Occ Sensor- Lamp and Ballast
- BNLO1 & L2
2
Occupancy
49
98
4
Occupancy
49
196
49
49
L&B TYPE BNLO1, TYPE L2
49
196
Wall Occ Sensor- Lamp and Ballast
- BNLO1 & L2
4
99
396
L&B TYPE BNLO1, TYPE L2
2
25
50
LED lamp
Wireless Ceiling OC-Lamp and
Ballast - TYPE BNLO1 & L2
Wireless Ceiling OC-Lamp and
Ballast - TYPE BNLO1 & L2
1
4
Occupancy
6
Occupancy
49
294
6
Occupancy
49
294
Page 21 of Page
1036 of 11
155
X Mail Room
FLT12-34W x 4L x 4'-2 MG(E)
2
144
288
156
X Gym
FLT12-34W x 4L x 4'-2 MG(E)
8
144
1,152
157
X Gym
FLT12-34W x 2L x 4'-MG(E)
1
72
72
158
X Gym Hallway
FLT12-34W x 2L x 4'-MG(E)
1
72
72
159
X Hallway
FLT12-34W x 4L x 4'-2 MG(E)
2
144
288
160
X
FLT12-34W x 2L x 4'-MG(E)
2
72
144
161
X Men's Locker
FLT12-34W x 4L x 4'-2 MG(E)
24
144
3,456
162
X
FLT12-34W x 2L x 4'-MG(E)
4
72
288
FLT12-34W x 2L x 4'-MG(E)
4
72
288
FLT12-34W x 2L x 4'-MG(E)
1
72
72
FLT12-34W x 2L x 4'-MG(E)
1
72
72
FLT12-34W x 4L x 4'-2 MG(E)
4
144
576
163
164
165
166
Men's Locker Uniforms
Men's Locker Showers
Men's Locker Room
X
Sink
Men's Locker X
Electrical Room
Men's Locker Room
X
Entry
X Hallway
Engineering Storage locked
167
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 4L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 4L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
2
49
98
Wall Occ Sensor- Lamp and Ballast
- BNLO1 & L2
Wireless Ceiling OC-Lamp and
Ballast - TYPE BNLO1 & L2
2' X 2' U Lamps - Wireless Ceiling
OC
8
Occupancy
49
392
1
Occupancy
49
49
1
49
49
L&B TYPE BNLO1, TYPE L2
2
99
198
L&B TYPE BNLO1, TYPE L2
49
98
Wireless Ceiling OC-Lamp and
Ballast - TYPE BNLO1 & L2
24
99
2,376
4
49
196
4' 2 lamp Vapor Tight surface wrap
4
49
196
Wall mounted 1 lamp wrap
1
49
49
4' 2 lamp Vapor Tight surface wrap
1
49
49
L&B TYPE BNLO1, TYPE L2
4
49
196
L&B TYPE BNLO1, TYPE L2
2
Occupancy
L&B TYPE BNLO2, TYPE L2
Was not considered.
168
X Men's Restroom
FLT12-34W x 2L x 4'-MG(E)
3
72
216
169
X Women's Restroom
FLT12-34W x 2L x 4'-MG(E)
3
72
216
170
X
58
144
8,352
171
X 18 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
4
144
576
172
X 18 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
4
144
576
173
X 18 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
4
144
576
174
X 18 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
4
144
576
175
B 18 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
4
144
576
176
B 18 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
4
144
576
177
B 18 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
3
144
432
178
B 18 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
3
144
432
179
B 18 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
3
144
432
180
B 18 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
3
144
432
181
B 18 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
3
144
432
Engineering Support FLT12-34W x 4L x 4'-2 MG(E)
2nd Floor
LT - DJ final - all lighting.xlsm
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
11/20/2013
11:37 PM
3
Occupancy
49
147
Wall mounted 1 lamp wrap
3
Occupancy
49
147
Wall mounted 1 lamp wrap
58
Occupancy
49
2,842
4
Occupancy
49
196
4
Occupancy
49
196
4
Occupancy
49
196
4
Occupancy
49
196
4
Occupancy
49
196
4
Occupancy
49
196
3
Occupancy
49
147
3
Occupancy
49
147
3
Occupancy
49
147
3
Occupancy
49
147
3
Occupancy
49
147
L&B TYPE BNLO1, TYPE L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Page 22 of Page
1037 of 11
FLT12-34W x 4L x 4'-2 MG(E)
4
144
576
191 + Y Outside Flag Lights
Exterior Under
192 + Y
Canopy Lights
Emergency
193
X
Generator Bldg
Emergency
194 + Y Generator Bldg Exterior
195
Maintenance Bldg
MH-250W-CWA
2
295
590
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
CUST: LED Flood 121W
ICMB-100W
9
72
648
FLT12-34W x 2L x 4'-MG(E)
9
72
MH-175W-CWA
3
196
X Tool Room
FLT12-34W x 2L x 4'-MG(E)
197
X Machine Shop
198
Machine Shop Over
X
Stairs
199
182
B 18 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
3
144
432
183
B 18 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
3
144
432
184
B 18 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
3
144
432
185
B 18 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
3
144
432
186
B 18 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
3
144
432
187
B 18 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
3
144
432
188
B 18 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
3
144
432
189
B Meeting Room
FLT12-34W x 4L x 4'-2 MG(E)
4
144
576
190
B Meeting Room
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
3
Occupancy
49
147
3
Occupancy
49
147
3
Occupancy
49
147
3
Occupancy
49
147
3
Occupancy
49
147
3
Occupancy
49
147
3
Occupancy
49
147
4
Occupancy
49
196
Wall mount vacancy sensor
4
Occupancy
49
196
Wall mount vacancy sensor
2
121
242
Type FL4
CUST: LEDSI-14W
9
14
126
LED Lamp
648
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
9
49
441
L&B TYPE BNLO1, TYPE L2
215
645
CUST: LEDHB-78W
3
78
234
Type RLB1
37
72
2,664
37
49
1,813
L&B TYPE BNLO1, TYPE L2
FLT12-75W x 2L x 8'-MG(E)
23
123
16
213
3,408
FHE Series- Type EHB3
FLT12-34W x 2L x 4'-MG(E)
2
72
2
49
98
X Open
MH-400W-CWA
18
458
14
213
2,982
200
X Maintenance Shop
FLT12-34W x 2L x 4'-MG(E)
3
72
3
49
147
201
X Maintenance Shop
FLT12-34W x 2L x 4'-MG(E)
12
72
7
213
1,491
FHE Series- Type EHB3
202
X Maintenance Shop
FLT12-75W x 2L x 8'-MG(E)
14
123
8
213
1,704
FHE Series- Type EHB3
203
X Maintenance Shop
FLT12-34W x 2L x 4'-MG(E)
2
72
2
49
98
L&B TYPE BNLO1, TYPE L2
204
X Bolt Room
FLT12-34W x 2L x 4'-MG(E)
43
72
43
49
2,107
L&B TYPE BNLO1, TYPE L2
FLT12-34W x 4L x 4'-2 MG(E)
3
144
FLT12-34W x 4L x 4'-2 MG(E)
4
144
FLT12-34W x 4L x 4'-2 MG(E)
4
144
FLT12-34W x 4L x 4'-2 MG(E)
4
144
FLT12-34W x 4L x 4'-2 MG(E)
4
144
205
X
206
X
207
X
208
X
209
X
1/2 Wayhouse 2nd
Floor
1/2 Wayhouse 2nd
Floor
1/2 Wayhouse 2nd
Floor
1/2 Wayhouse 2nd
Floor
1/2 Wayhouse 2nd
Floor
LT - DJ final - all lighting.xlsm
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEEHB-32W x 6L x 4'-CEE
2,829
IS CEE H
FLT8CEE-28W x 2L x 4'-CEE
144
RS/PRS CEE N
FLT8CEEHB-32W x 6L x 4'-CEE
8,244
IS CEE H
FLT8CEE-28W x 2L x 4'-CEE
216
RS/PRS CEE N
FLT8CEEHB-32W x 6L x 4'-CEE
864
IS CEE H
FLT8CEEHB-32W x 6L x 4'-CEE
1,722
IS CEE H
FLT8CEE-28W x 2L x 4'-CEE
144
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
3,096
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
432
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
576
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
576
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
576
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
576
RS/PRS CEE N
11/20/2013
11:37 PM
Lamp and Ballast
3
Occupancy
49
147
4
Occupancy
49
196
4
Occupancy
49
196
4
Occupancy
49
196
4
Occupancy
49
196
FHE Series- Type EHB3
L&B TYPE BNLO1, TYPE L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Page 23 of Page
1038 of 11
212
1/2 Wayhouse 2nd
Floor
Planning Room X
Open Office
X Hallways
213
B 8 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
3
144
432
214
B 8 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
3
144
432
215
B 8 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
4
144
576
216
B 8 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
4
144
576
217
B 8 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
4
144
576
218
B 8 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
4
144
576
219
B 8 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
4
144
576
220
B 8 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
4
144
576
221
X Men's Restroom
FLT12-34W x 2L x 4'-MG(E)
1
72
72
222
X EM Trucks
Main Warehouse
Offices
HPS-100W
3
130
390
224
X Entry
FLT12-34W x 2L x 4'-MG(E)
2
72
225
X Entry
FLT12-34W x 2L x 4'-MG(E)
16
72
226
X Break Room / Parts
FLT12-34W x 4L x 4'-2 MG(E)
8
144
227
X Conference Room
FLT12-34W x 4L x 4'-2 MG(E)
4
144
228
B 6 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
4
144
229
B 6 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
4
144
230
B 6 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
3
144
231
B 6 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
3
144
232
B 6 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
3
144
233
B 6 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
3
144
234
X Down / Parts Drawer FLT12-34W x 2L x 4'-MG(E)
8
72
235
X Down / Parts Drawer FLT12-34W x 2L x 4'-MG(E)
8
72
236
X Down / Parts Drawer FLT12-34W x 2L x 4'-MG(E)
9
72
237
X Down / Parts Drawer FLT12-34W x 2L x 4'-MG(E)
9
72
238
X Down / Parts Drawer FLT12-34W x 2L x 4'-MG(E)
9
72
210
211
223
X
FLT12-34W x 4L x 4'-2 MG(E)
4
144
576
FLT12-34W x 4L x 4'-2 MG(E)
9
144
1,296
FLT12-34W x 2L x 4'-MG(E)
6
72
432
LT - DJ final - all lighting.xlsm
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8-17W x 3L x 2'-IS(E) L
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
CUST: LEDWP-40W
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
1,152
FLT8-17W x 3L x 2'-IS(E) L
FLT8CEE-28W x 2L x 4'-CEE
1,152
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
576
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
576
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
576
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
432
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
432
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
432
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
432
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
576
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
576
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
648
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
648
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
648
RS/PRS CEE N
11/20/2013
11:37 PM
144
49
196
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
9
49
441
Lamp and Ballast
9
40
360
2' X 2' Lamp and ballast
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
4
Occupancy
3
Occupancy
49
147
3
Occupancy
49
147
4
Occupancy
49
196
4
Occupancy
49
196
4
Occupancy
49
196
4
Occupancy
49
196
4
Occupancy
49
196
4
Occupancy
49
196
1
49
49
L&B TYPE BNLO1, TYPE L2
3
40
120
Type WP1
2
49
98
L&B TYPE BNLO1, TYPE L2
16
40
640
2' X 2' Lamp and ballast
8
49
392
L&B TYPE BNLO1, TYPE L2
4
Occupancy
49
196
4
Occupancy
49
196
4
Occupancy
49
196
3
Occupancy
49
147
3
Occupancy
49
147
3
Occupancy
49
147
3
Occupancy
49
147
8
Occupancy
49
392
8
Occupancy
49
392
9
Occupancy
49
441
9
Occupancy
49
441
9
Occupancy
49
441
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Fixture mount Occ Sensors- Lamp
and Ballast - TYPE BNLO1 & L2
Fixture mount Occ Sensors- Lamp
and Ballast - TYPE BNLO1 & L2
Fixture mount Occ Sensors- Lamp
and Ballast - TYPE BNLO1 & L2
Fixture mount Occ Sensors- Lamp
and Ballast - TYPE BNLO1 & L2
Fixture mount Occ Sensors- Lamp
and Ballast - TYPE BNLO1 & L2
Page 24 of Page
1039 of 11
239
X Down / Parts Drawer FLT12-34W x 2L x 4'-MG(E)
9
72
648
240
X Down / Parts Drawer FLT12-34W x 2L x 4'-MG(E)
9
72
648
241
X Down / Parts Drawer FLT12-34W x 2L x 4'-MG(E)
9
72
648
242
X Down / Parts Drawer FLT12-34W x 2L x 4'-MG(E)
9
72
648
243
X Down / Parts Drawer FLT12-75W x 2L x 8'-MG(E)
20
123
2,460
244
X Down / Parts Drawer MH-400W-CWA
9
458
4,122
245
X
17
458
7,786
6
458
2,748
246
Warehouse Storage MH-400W-CWA
Back
Warehouse Storage X
MH-400W-CWA
Back
247
X Supply Room
FLT12-34W x 4L x 4'-2 MG(E)
8
144
1,152
248
X Supply Room
FLT12-34W x 2L x 4'-MG(E)
2
72
144
249
40 Annex Building
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 4L x 4'-CEE
RS/PRS CEE N
FLT8CEEHB-32W x 6L x 4'-CEE
IS CEE H
FLT8CEEHB-32W x 6L x 4'-CEE
IS CEE H
FLT8CEEHB-32W x 6L x 4'-CEE
IS CEE H
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
250
X Offices
FLT12-34W x 4L x 4'-2 MG(E)
11
144
1,584
251
X Private Offices
FLT12-34W x 4L x 4'-2 MG(E)
3
144
432
252
X Private Offices
FLT12-34W x 4L x 4'-2 MG(E)
3
144
432
253
X Private Offices
FLT12-34W x 4L x 4'-2 MG(E)
3
144
432
254
X Private Offices
FLT12-34W x 4L x 4'-2 MG(E)
3
144
432
MH-1000W-CWA
32
1,080
34,560
CUST: LED HB 511W
MH-1000W-CWA
24
1,080
25,920
HPS-150W
129
188
MH-175W-CWA
177
ICMB-100W
255 + Y
256 + Y
257
258
X
259
X
260
X
261 + Y
262 + Y
100' Pole LightsExterior
70' Pole LightsExterior
Conveyor Building
Conveyor to
Appleton, etc.
31, 33, 34 & 35
Sump
RLM 31, 33, 34 & 35
Sump
Floods-Exterior
Floods-Exterior
263 + Y Roadway-Exterior
Fixture mount Occ Sensors- Lamp
and Ballast - TYPE BNLO1 & L2
Fixture mount Occ Sensors- Lamp
and Ballast - TYPE BNLO1 & L2
Fixture mount Occ Sensors- Lamp
and Ballast - TYPE BNLO1 & L2
Fixture mount Occ Sensors- Lamp
and Ballast - TYPE BNLO1 & L2
Fixture mount Occ Sensors- Lamp
and Ballast - TYPE BNLO2 & L2
9
Occupancy
49
441
9
Occupancy
49
441
9
Occupancy
49
441
9
Occupancy
49
441
20
99
1,980
5
213
1,065
Typ HB2
11
Integral
213
2,343
Two Outer aisles-Type HB2
6
Integral
213
1,278
Center aisle-Type HB2
8
Occupancy
49
392
Wireless Ceiling OC-Lamp and
Ballast
2
Dup. Occ
49
98
L&B TYPE BNLO1, TYPE L2
49
539
L&B TYPE BNLO1, TYPE L2
11
3
Occupancy
49
147
L&B TYPE BNLO1, TYPE L2
3
Occupancy
49
147
L&B TYPE BNLO1, TYPE L2
3
Occupancy
49
147
L&B TYPE BNLO1, TYPE L2
3
Occupancy
49
147
L&B TYPE BNLO1, TYPE L2
32
511
16,352
CUST: LED HB 511W
24
511
12,264
24,252
CUST: LEDHB-78W
129
78
10,062
Type RLB1
215
38,055
CUST: LEDHB-78W
177
78
13,806
Type RLB1
40
72
2,880
CUST: LEDSI-14W
40
14
560
LED Lamp
HPS-400W
HPS-250W
34
29
465
295
15,810
8,555
CUST: LED Flood - 179W
CUST: LED Flood 121W
34
29
179
121
6,086
3,509
HPS-200W
15
250
3,750
CUST: LEDPM-105W
15
105
1,575
264
LT - DJ final - all lighting.xlsm
11/20/2013
11:37 PM
Recommend new LED High Mast
Light fixture. Holophane or GE
Recommend new LED High Mast
Light fixture. Holophane or GE
Type FL5
Type FL4
Type AL1- Area Light/Pole mount Type III Dist.
Page 25 ofPage
103
10 of 11
Wyoming FinAnswer Express Program
07/01/13 Effective Date
Project ID
You Can Now Use The Project
Information Tab
Lighting Coordinator
Dan Kuhl
Tool Prepared by
Dan
Project Manager
Account Manager
V 070113.5.3
Customer Information
Processing Information
Construction Type
Project Name Dave Johnston Power Plant - T12 Phase
Installation Address 1591 Tank Farm Rd
City, State, Zip Glenrock
WY
82637
Material
Labor
Other
Total Project Cost
$108,730.00
$14,600.00
$770.00
$124,100.00
Whole Building
Allowed Wattage
720,000
Space Type & Size
Contact, Title Brian Gangl
Phone, Email (307) 995-5193
[email protected]
Account, Meter, Rate
48T
Acct Holder
Preliminary
Project Cost
Business Name PacifiCorp Energy
Participant is:
Stage
Retrofit
Elect. User
Business Type
Calculation Method
1 Other
Building Owner
Other
Contractor Information
Contact
EEA Participant
2
FT
2
W/FT 2
FT 2
W/FT 2
FT 2
W/FT 2
2
W/FT 2
FT
Business Name
1,200,000
FT 2 1,200,000
Other
2
FT
0.60
0.60
W/FT
W/FT 2
Lighting Operation Schedule
Address
City, State, Zip
Phone, Email
Payee Information
Incentive Should Be Addressed To:
Business Name
Attention
Check Reference
# of Holidays Closed?
Day
A
B
0
Mon
3.0
10.0
Op Weeks Per Year
Tue
3.0
10.0
52
Wed
3.0
10.0
"S" is for a seasonal
Add/Edit
operational
schedule
Thu
3.0
10.0
Fri
3.0
10.0
S is for 0 hrs/year
Sat
3.0
4.0
Address
X is for 8760 hrs/year
Sun
3.0
0.0
City, State, Zip
Y is for 4380 hrs/year
Total
1,095
2,816
Eligibility Information
C
D
E
Additional Information
Business Name
Address
City, State, Zip
Account #
Meter Base #, Rate
LT - DJ final - T12.xlsm
Office Use Only
Import
Existing
Project
11/20/2013
EEA
Participant
Info
Email
Coordinator
Lighting
Catalog
LED
Policy
Report A
Problem
Page 1
Page 26 of 103
-10
-9
-8
Category
-7
-6
-5
-4
-3
-2
-1
Add Fixture
Fixture
Remove Fixture
Lamp
Savings Information
Clear Filter
Lamp (W)
Lamp Qty
517,785 kWh Saved
Per Year
Build Fixture
Ballast
Reset
Factor
45W - CMH-39W-ELEC
Lighting Power Density
90.8%
0.11 Existing
Better Than Code
0.06 Proposed
LPD
0.60 Code
HID Ceramic Metal Halide Standard (39W x 1L) 1 Electronic
Standard Incentive (47.9% of Cost Paid By Incentive)
Preliminary
Dave Johnston Power Plant - T12 Phase
Exterior
Schedule
Line Number
155 Out Of 200 Lines Used
1
Existing
Space Description
Unit 4
Fixture
Interior
1152
Qty
0
Controls
Exterior
127,216
0
Fixture
Wattage
Space
Wattage
2
X Overall Lunch Room FLT12-34W x 2L x 4'-MG(E)
3
72
216
3
X # 4 Control Area
FLT12-34W x 4L x 4'-2 MG(E)
24
144
3,456
4
X Unit #1
FLT12-34W x 2L x 4'-MG(E)
42
72
3,024
5
X Unit #1
FLT12HO-95W x 2L x 8'-MG(E)
12
207
2,484
6
X Engineering Office
FLT12HO-95W x 2L x 8'-MG(E)
22
207
4,554
7
X Restrooms
FLT12-34W x 4L x 4'-2 MG(E)
2
144
288
8
X Lunch Room
FLT12-34W x 2L x 4'-MG(E)
11
72
792
9
X Lunch Room
FLT12-34W x 2L x 4'-MG(E)
10
72
720
10
X
FLT12HO-95W x 2L x 8'-MG(E)
5
207
1,035
11
X Lab
FLT12-34W x 4L x 4'-2 MG(E)
14
144
2,016
12
X Lab
FLT12-34W x 3L x 4'-2 MG(E)
2
115
230
13
X Lab
FLT12-34W x 3L x 4'-MG(E)
20
115
2,300
14
#3 Switch Gear &
Lab
Unit #4 Mezzanine
15
X Switch Gear
FLT12-34W x 2L x 4'-MG(E)
7
72
16
X Switch Gear
FLT12-34W x 2L x 4'-MG(E)
29
72
17
X Mezzanine
FLT12-34W x 2L x 4'-MG(E)
26
72
18
X AQC Bldg
FLT12-34W x 2L x 4'-MG(E)
11
72
19
X Insulator Shop
FLT12-34W x 4L x 4'-2 MG(E)
10
144
LT - DJ final - T12.xlsm
Proposed
Fixture
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 4L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 4L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 4L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
2,088
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
1,872
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
792
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
1,440
RS/PRS CEE N
11/20/2013
11:25 PM
504
Interior
1133
93
Exterior
65,965
0
↓↓Project Tracking↓↓
Preliminary
Pre-Inspection
Agreement Needed
Contracted
Post-Inspection
Final Review Needed
Fixture
Wattage
Space
Wattage
3
49
147
Lamp and Ballast
24
49
1,176
Lamp and Ballast
42
49
2,058
L&B TYPE BNLO1, TYPE L2
12
99
1,188
Type SK2, BNLO2, L2
22
99
2,178
Type SK2, BNLO2, L2
Qty
Controls
↓↓Project Notes↓↓
2
Occupancy
49
98
L&B TYPE BNLO1, TYPE L2
10
Occupancy
49
490
11
Occupancy
49
539
5
99
495
Type SK2, BNLO2, L2
14
49
686
L&B TYPE BNLO1, TYPE L2
2
49
98
L&B TYPE BNLO1, TYPE L2
20
49
980
L&B TYPE BNLO1, TYPE L2
7
49
343
L&B TYPE BNLO1, TYPE L2
29
49
1,421
L&B TYPE BNLO1, TYPE L2
26
49
1,274
L&B TYPE BNLO1, TYPE L2
11
49
539
L&B TYPE BNLO1, TYPE L2
10
49
490
L&B TYPE BNLO1, TYPE L2
Wireless Ceiling OC-Lamp and
Ballast.
Wireless Ceiling OC-Lamp and
Ballast
Page 27 of 103
Page 1 of 7
20
X Insulator Shop
FLT12-34W x 2L x 4'-MG(E)
6
72
432
21
X Training Bldg
FLT12-34W x 2L x 4'-MG(E)
10
72
720
22
X Training Bldg
FLT12-34W x 2L x 4'-MG(E)
1
72
72
23
X Men's Restroom
FLT12-34W x 2L x 4'-MG(E)
2
72
144
24
X Women's Restroom
FLT12-34W x 2L x 4'-MG(E)
2
72
144
25
X Utility Room
FLT12-34W x 2L x 4'-MG(E)
4
72
288
26
X Training Library
FLT12-34W x 4L x 4'-2 MG(E)
4
144
576
27
X Small Office
FLT12-34W x 4L x 4'-2 MG(E)
2
144
288
28
X Break Area
FLT12-34W x 4L x 4'-2 MG(E)
2
144
288
29
X Class Room A
FLT12-34W x 4L x 4'-2 MG(E)
12
144
1,728
30
X Bob Miller Office
FLT12-34W x 4L x 4'-2 MG(E)
2
144
288
31
X Tech Training
FLT12-34W x 4L x 4'-2 MG(E)
2
144
288
32
X Sim Room
FLT12-34W x 4L x 4'-2 MG(E)
4
144
576
33
X Class Room B
FLT12-34W x 4L x 4'-2 MG(E)
13
144
1,872
34
X Rob McComas
FLT12-34W x 4L x 4'-2 MG(E)
1
144
144
35
X Store Room
FLT12-34W x 4L x 4'-2 MG(E)
1
144
144
36
Computer Training
X
Lab
FLT12-34W x 4L x 4'-2 MG(E)
9
144
1,296
37
X Hallway
FLT12-34W x 4L x 4'-2 MG(E)
1
144
144
38
X Repair Shop
FLT12-34W x 4L x 4'-2 MG(E)
12
144
1,728
39
X Stock Room
FLT12-75W x 2L x 8'-MG(E)
2
123
246
40
X Stock Room
FLT12-75W x 2L x 8'-MG(E)
1
123
123
41
X Stock Room
FLT12-34W x 2L x 4'-MG(E)
4
72
288
42
X Locker Room
FLT12-34W x 2L x 4'-MG(E)
4
72
288
43
X Locker Room
FLT12-34W x 2L x 4'-MG(E)
5
72
360
44
X Upstairs Office
FLT12-34W x 2L x 4'-MG(E)
3
72
216
45
X Upstairs Break Room FLT12-34W x 2L x 4'-MG(E)
8
72
46
X Upstairs Office
4
72
LT - DJ final - T12.xlsm
FLT12-34W x 2L x 4'-MG(E)
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
CUST: FLT8CEE-28W x 2L x 4'CEE RS/PRSDIM N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEEHB-32W x 6L x 4'-CEE
IS CEE H
FLT8CEE-28W x 4L x 4'-CEE
RS/PRS CEE N
FLT12-75W x 2L x 8'-MG(E)
FLT8CEE-28W x 4L x 4'-CEE
RS/PRS CEE N
6
49
294
L&B TYPE BNLO1, TYPE L2
10
49
490
2' X 2' U Lamps
1
49
49
L&B TYPE BNLO1, TYPE L2
49
98
L&B TYPE BNLO1, TYPE L2
49
98
L&B TYPE BNLO1, TYPE L2
2
Integral
Occupancy
2
4
Occupancy
49
196
L&B TYPE BNLO1, TYPE L2
4
Occupancy
49
196
L&B TYPE BNLO1, TYPE L2
2
Occupancy
49
98
L&B TYPE BNLO1, TYPE L2
2
49
98
L&B TYPE BNLO1, TYPE L2
12
49
588
L&B TYPE BNLO1, TYPE L2
2
49
98
L&B TYPE BNLO1, TYPE L2
2
49
98
L&B TYPE BNLO1, TYPE L2
4
Occupancy
49
196
L&B TYPE BNLO1, TYPE L2
13
Occupancy
0
0
L&B TYPE BNLO1, TYPE L2
1
49
49
L&B TYPE BNLO1, TYPE L2
1
49
49
L&B TYPE BNLO1, TYPE L2
49
441
L&B TYPE BNLO1, TYPE L2
1
49
49
L&B TYPE BNLO1, TYPE L2
9
213
1,917
2
99
198
0
123
0
9
Occupancy
FHE Series- Type EHB3
Wire Body Kit-Type SK2, BNLO2,
L2
Remove One 2L F96 T12
Wireless Ceiling OC-Lamp And
Ballast - TYPE BNLO2 & L2
4
Occupancy
99
396
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
4
Occupancy
49
196
3-Way Occ sensors wireless- Lamp
and Ballast - TYPE BNLO1 & L2
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
5
Occupancy
49
245
3-Way Occ sensors wireless- Lamp
and Ballast - TYPE BNLO1 & L2
3
Occupancy
49
147
8
Occupancy
49
392
4
Occupancy
49
196
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
576
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
288
RS/PRS CEE N
11/20/2013
11:17 PM
Wireless Ceiling OC -Lamp and
Ballast - TYPE BNLO1 & L2
Wireless Ceiling OC -Lamp and
Ballast - TYPE BNLO1 & L2
Wall Occ Sensor- L&B - TYPE
BNLO1 & L2
Page 28 of 103
Page 3 of 9
47
Unit #1 & #2 Cooling
Tower
48
X MCC Room
FLT12-34W x 2L x 4'-MG(E)
16
72
1,152
49
X Penthouse
FLT12-34W x 2L x 4'-MG(E)
16
72
1,152
50
Penthouse X
Communication
FLT12-34W x 2L x 4'-MG(E)
2
72
144
51
X Unit #1 & #2
FLT12-34W x 2L x 4'-MG(E)
80
72
5,760
52
X RLM
FLT12-75W x 8'-MG(E)
3
75
225
53
Admin Bldg - 1st
Floor
54
X Entry
FLT12-34W x 2L x 4'-MG(E)
2
72
144
55
X Hallway
FLT12-34W x 4L x 4'-2 MG(E)
13
144
1,872
56
Break Room X
Kitchen
FLT12-34W x 4L x 4'-2 MG(E)
2
144
288
57
X Men's Restroom
FLT12-34W x 4L x 4'-2 MG(E)
1
144
144
58
X Women's Restroom
FLT12-34W x 4L x 4'-2 MG(E)
1
144
144
59
X Paula Edberg
FLT12-34W x 4L x 4'-2 MG(E)
4
144
576
60
X Jamie Gibson
FLT12-34W x 4L x 4'-2 MG(E)
4
144
576
61
X Tory Gear
FLT12-34W x 4L x 4'-2 MG(E)
4
144
576
62
X Arly Frye
FLT12-34W x 4L x 4'-2 MG(E)
4
144
576
FLT12-34W x 4L x 4'-2 MG(E)
10
144
1,440
FLT12-34W x 4L x 4'-2 MG(E)
10
144
1,440
63
64
Hallwy, Office
X
Procurement Dept.
Open Office, Small
X
Office
65
X Carole Newell
FLT12-34W x 4L x 4'-2 MG(E)
2
144
288
66
X Mark Wasinger
FLT12-34W x 4L x 4'-2 MG(E)
4
144
576
67
X Supplies Room
FLT12-34W x 4L x 4'-2 MG(E)
1
144
144
68
X Karl Eighmy
FLT12-34W x 4L x 4'-2 MG(E)
4
144
576
69
X Testing Room
FLT12-34W x 4L x 4'-2 MG(E)
4
144
576
70
X Training Room
FLT12-34W x 4L x 4'-2 MG(E)
6
144
864
71
X Training Room
FLT12-34W x 4L x 4'-2 MG(E)
6
144
864
72
X Mail Room
FLT12-34W x 4L x 4'-2 MG(E)
2
144
288
73
X Gym
FLT12-34W x 4L x 4'-2 MG(E)
8
144
1,152
LT - DJ final - T12.xlsm
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 4L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
11/20/2013
11:17 PM
16
49
784
Vapor Tight wo/ lens -Lamp and
Ballast - TYPE BNLO1 & L2
16
49
784
L&B TYPE BNLO1, TYPE L2
2
49
98
L&B TYPE BNLO1, TYPE L2
80
49
3,920
L&B TYPE BNLO1, TYPE L2
3
49
147
Type SK2, BNLO1, L2
2
49
98
L&B TYPE BNLO1, TYPE L2
13
49
637
L&B TYPE BNLO1, TYPE L2
49
98
Wall Occ Sensor- Lamp and Ballast
- BNLO1 & L2
1
49
49
L&B TYPE BNLO1, TYPE L2
1
49
49
L&B TYPE BNLO1, TYPE L2
2
Occupancy
Wall Occ Sensor- Lamp and Ballast
- BNLO1 & L2
Wall Occ Sensor- Lamp and Ballast
- BNLO1 & L2
Wall Occ Sensor- Lamp and Ballast
- BNLO1 & L2
Wall Occ Sensor- Lamp and Ballast
- BNLO1 & L2
4
Occupancy
49
196
4
Occupancy
49
196
4
Occupancy
49
196
4
Occupancy
49
196
10
49
490
L&B TYPE BNLO1, TYPE L2
10
49
490
L&B TYPE BNLO1, TYPE L2
Wall Occ Sensor- Lamp and Ballast
- BNLO1 & L2
Wall Occ Sensor- Lamp and Ballast
- BNLO1 & L2
2
Occupancy
49
98
4
Occupancy
49
196
49
49
L&B TYPE BNLO1, TYPE L2
49
196
Wall Occ Sensor- Lamp and Ballast
- BNLO1 & L2
99
396
L&B TYPE BNLO1, TYPE L2
1
4
Occupancy
4
6
Occupancy
49
294
6
Occupancy
49
294
49
98
49
392
2
8
Occupancy
Wireless Ceiling OC-Lamp and
Ballast - TYPE BNLO1 & L2
Wireless Ceiling OC-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Occ Sensor- Lamp and Ballast
- BNLO1 & L2
Wireless Ceiling OC-Lamp and
Ballast - TYPE BNLO1 & L2
Page 29 of 103
Page 4 of 9
74
X Gym
FLT12-34W x 2L x 4'-MG(E)
1
72
72
75
X Gym Hallway
FLT12-34W x 2L x 4'-MG(E)
1
72
72
76
X Hallway
FLT12-34W x 4L x 4'-2 MG(E)
2
144
288
77
Men's Locker X
Uniforms
FLT12-34W x 2L x 4'-MG(E)
2
72
144
78
X Men's Locker
FLT12-34W x 4L x 4'-2 MG(E)
24
144
3,456
79
X
FLT12-34W x 2L x 4'-MG(E)
4
72
288
FLT12-34W x 2L x 4'-MG(E)
4
72
288
FLT12-34W x 2L x 4'-MG(E)
1
72
72
FLT12-34W x 2L x 4'-MG(E)
1
72
72
FLT12-34W x 4L x 4'-2 MG(E)
4
144
576
80
81
82
83
Men's Locker Showers
Men's Locker Room
X
Sink
Men's Locker X
Electrical Room
Men's Locker Room
X
Entry
X Hallway
Engineering Storage locked
84
49
49
2' X 2' U Lamps - Wireless Ceiling
OC
1
49
49
L&B TYPE BNLO1, TYPE L2
2
99
198
L&B TYPE BNLO1, TYPE L2
49
98
Wireless Ceiling OC-Lamp and
Ballast - TYPE BNLO1 & L2
24
99
2,376
4
49
196
4' 2 lamp Vapor Tight surface wrap
4
49
196
Wall mounted 1 lamp wrap
1
49
49
4' 2 lamp Vapor Tight surface wrap
1
49
49
L&B TYPE BNLO1, TYPE L2
4
49
196
L&B TYPE BNLO1, TYPE L2
1
2
Occupancy
Occupancy
L&B TYPE BNLO2, TYPE L2
Was not considered.
85
X Men's Restroom
FLT12-34W x 2L x 4'-MG(E)
3
72
216
86
X Women's Restroom
FLT12-34W x 2L x 4'-MG(E)
3
72
216
87
X
58
144
8,352
88
X 18 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
4
144
576
89
X 18 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
4
144
576
90
X 18 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
4
144
576
91
X 18 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
4
144
576
92
B 18 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
4
144
576
93
B 18 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
4
144
576
94
B 18 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
3
144
432
95
B 18 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
3
144
432
96
B 18 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
3
144
432
97
B 18 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
3
144
432
98
B 18 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
3
144
432
99
B 18 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
3
144
432
100
B 18 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
3
144
432
Engineering Support FLT12-34W x 4L x 4'-2 MG(E)
2nd Floor
LT - DJ final - T12.xlsm
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 4L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 4L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
11/20/2013
11:17 PM
3
Occupancy
49
147
Wall mounted 1 lamp wrap
3
Occupancy
49
147
Wall mounted 1 lamp wrap
58
Occupancy
49
2,842
4
Occupancy
49
196
4
Occupancy
49
196
4
Occupancy
49
196
4
Occupancy
49
196
4
Occupancy
49
196
4
Occupancy
49
196
3
Occupancy
49
147
3
Occupancy
49
147
3
Occupancy
49
147
3
Occupancy
49
147
3
Occupancy
49
147
3
Occupancy
49
147
3
Occupancy
49
147
L&B TYPE BNLO1, TYPE L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Page 30 of 103
Page 5 of 9
101
B 18 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
3
144
432
102
B 18 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
3
144
432
103
B 18 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
3
144
432
104
B 18 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
3
144
432
105
B 18 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
3
144
432
106
B Meeting Room
FLT12-34W x 4L x 4'-2 MG(E)
4
144
576
107
B Meeting Room
FLT12-34W x 4L x 4'-2 MG(E)
4
144
576
108
X
FLT12-34W x 2L x 4'-MG(E)
9
72
648
109
Emergency
Generator Bldg
Maintenance Bldg
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
110
X Tool Room
FLT12-34W x 2L x 4'-MG(E)
37
72
2,664
111
X Machine Shop
FLT12-75W x 2L x 8'-MG(E)
23
123
2,829
112
X
FLT12-34W x 2L x 4'-MG(E)
2
72
144
113
X Maintenance Shop
FLT12-34W x 2L x 4'-MG(E)
3
72
216
114
X Maintenance Shop
FLT12-34W x 2L x 4'-MG(E)
12
72
864
115
X Maintenance Shop
FLT12-75W x 2L x 8'-MG(E)
14
123
1,722
116
X Maintenance Shop
FLT12-34W x 2L x 4'-MG(E)
2
72
144
117
X Bolt Room
FLT12-34W x 2L x 4'-MG(E)
43
72
3,096
118
X
FLT12-34W x 4L x 4'-2 MG(E)
3
144
432
119
X
FLT12-34W x 4L x 4'-2 MG(E)
4
144
576
120
X
FLT12-34W x 4L x 4'-2 MG(E)
4
144
576
121
X
FLT12-34W x 4L x 4'-2 MG(E)
4
144
576
122
X
FLT12-34W x 4L x 4'-2 MG(E)
4
144
576
123
X
FLT12-34W x 4L x 4'-2 MG(E)
4
144
576
124
X
FLT12-34W x 4L x 4'-2 MG(E)
9
144
1,296
125
X
FLT12-34W x 2L x 4'-MG(E)
6
72
432
126
B 8 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
3
144
432
127
B 8 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
3
144
432
128
B 8 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
4
144
576
Machine Shop Over
Stairs
1/2 Wayhouse 2nd
Floor
1/2 Wayhouse 2nd
Floor
1/2 Wayhouse 2nd
Floor
1/2 Wayhouse 2nd
Floor
1/2 Wayhouse 2nd
Floor
1/2 Wayhouse 2nd
Floor
Planning Room Open Office
Hallways
LT - DJ final - T12.xlsm
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEEHB-32W x 6L x 4'-CEE
IS CEE H
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEEHB-32W x 6L x 4'-CEE
IS CEE H
FLT8CEEHB-32W x 6L x 4'-CEE
IS CEE H
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8-17W x 3L x 2'-IS(E) L
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
11/20/2013
11:17 PM
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
3
Occupancy
49
147
3
Occupancy
49
147
3
Occupancy
49
147
3
Occupancy
49
147
3
Occupancy
49
147
4
Occupancy
49
196
Wall mount vacancy sensor
4
Occupancy
49
196
Wall mount vacancy sensor
9
49
441
L&B TYPE BNLO1, TYPE L2
37
49
1,813
L&B TYPE BNLO1, TYPE L2
16
213
3,408
FHE Series- Type EHB3
2
49
98
Lamp and Ballast
3
49
147
L&B TYPE BNLO1, TYPE L2
7
213
1,491
FHE Series- Type EHB3
8
213
1,704
FHE Series- Type EHB3
2
49
98
L&B TYPE BNLO1, TYPE L2
43
49
2,107
L&B TYPE BNLO1, TYPE L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
3
Occupancy
49
147
4
Occupancy
49
196
4
Occupancy
49
196
4
Occupancy
49
196
4
Occupancy
49
196
4
Occupancy
49
196
9
49
441
Lamp and Ballast
9
40
360
2' X 2' Lamp and ballast
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
3
Occupancy
49
147
3
Occupancy
49
147
4
Occupancy
49
196
Page 31 of 103
Page 6 of 9
129
B 8 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
4
144
576
130
B 8 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
4
144
576
131
B 8 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
4
144
576
132
B 8 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
4
144
576
133
B 8 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
4
144
576
134
X Men's Restroom
FLT12-34W x 2L x 4'-MG(E)
1
72
72
72
135
Main Warehouse
Offices
136
X Entry
FLT12-34W x 2L x 4'-MG(E)
2
137
X Entry
FLT12-34W x 2L x 4'-MG(E)
16
72
138
X Break Room / Parts
FLT12-34W x 4L x 4'-2 MG(E)
8
144
139
X Conference Room
FLT12-34W x 4L x 4'-2 MG(E)
4
144
140
B 6 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
4
144
141
B 6 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
4
144
142
B 6 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
3
144
143
B 6 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
3
144
144
B 6 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
3
144
145
B 6 Small Offices
FLT12-34W x 4L x 4'-2 MG(E)
3
144
146
X Down / Parts Drawer FLT12-34W x 2L x 4'-MG(E)
8
72
147
X Down / Parts Drawer FLT12-34W x 2L x 4'-MG(E)
8
72
148
X Down / Parts Drawer FLT12-34W x 2L x 4'-MG(E)
9
72
149
X Down / Parts Drawer FLT12-34W x 2L x 4'-MG(E)
9
72
150
X Down / Parts Drawer FLT12-34W x 2L x 4'-MG(E)
9
72
151
X Down / Parts Drawer FLT12-34W x 2L x 4'-MG(E)
9
72
152
X Down / Parts Drawer FLT12-34W x 2L x 4'-MG(E)
9
72
153
X Down / Parts Drawer FLT12-34W x 2L x 4'-MG(E)
9
72
154
X Down / Parts Drawer FLT12-34W x 2L x 4'-MG(E)
9
72
155
X Down / Parts Drawer FLT12-75W x 2L x 8'-MG(E)
20
123
156
X Supply Room
8
144
LT - DJ final - T12.xlsm
FLT12-34W x 4L x 4'-2 MG(E)
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
1,152
FLT8-17W x 3L x 2'-IS(E) L
FLT8CEE-28W x 2L x 4'-CEE
1,152
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
576
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
576
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
576
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
432
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
432
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
432
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
432
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
576
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
576
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
648
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
648
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
648
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
648
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
648
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
648
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
648
RS/PRS CEE N
FLT8CEE-28W x 4L x 4'-CEE
2,460
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
1,152
RS/PRS CEE N
11/20/2013
11:17 PM
144
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
4
Occupancy
49
196
4
Occupancy
49
196
4
Occupancy
49
196
4
Occupancy
49
196
4
Occupancy
49
196
1
49
49
L&B TYPE BNLO1, TYPE L2
2
49
98
L&B TYPE BNLO1, TYPE L2
16
40
640
2' X 2' Lamp and ballast
8
49
392
L&B TYPE BNLO1, TYPE L2
4
Occupancy
49
196
4
Occupancy
49
196
4
Occupancy
49
196
3
Occupancy
49
147
3
Occupancy
49
147
3
Occupancy
49
147
3
Occupancy
49
147
8
Occupancy
49
392
8
Occupancy
49
392
9
Occupancy
49
441
9
Occupancy
49
441
9
Occupancy
49
441
9
Occupancy
49
441
9
Occupancy
49
441
9
Occupancy
49
441
9
Occupancy
49
441
99
1,980
49
392
20
8
Occupancy
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Wall Mount Wireless-Lamp and
Ballast - TYPE BNLO1 & L2
Fixture mount Occ Sensors- Lamp
and Ballast - TYPE BNLO1 & L2
Fixture mount Occ Sensors- Lamp
and Ballast - TYPE BNLO1 & L2
Fixture mount Occ Sensors- Lamp
and Ballast - TYPE BNLO1 & L2
Fixture mount Occ Sensors- Lamp
and Ballast - TYPE BNLO1 & L2
Fixture mount Occ Sensors- Lamp
and Ballast - TYPE BNLO1 & L2
Fixture mount Occ Sensors- Lamp
and Ballast - TYPE BNLO1 & L2
Fixture mount Occ Sensors- Lamp
and Ballast - TYPE BNLO1 & L2
Fixture mount Occ Sensors- Lamp
and Ballast - TYPE BNLO1 & L2
Fixture mount Occ Sensors- Lamp
and Ballast - TYPE BNLO1 & L2
Fixture mount Occ Sensors- Lamp
and Ballast - TYPE BNLO2 & L2
Wireless Ceiling OC-Lamp and
Ballast
Page 32 of 103
Page 7 of 9
157
158
X Supply Room
FLT12-34W x 2L x 4'-MG(E)
2
72
144
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
40 Annex Building
159
X Offices
FLT12-34W x 4L x 4'-2 MG(E)
11
144
1,584
160
X Private Offices
FLT12-34W x 4L x 4'-2 MG(E)
3
144
432
161
X Private Offices
FLT12-34W x 4L x 4'-2 MG(E)
3
144
432
162
X Private Offices
FLT12-34W x 4L x 4'-2 MG(E)
3
144
432
163
X Private Offices
FLT12-34W x 4L x 4'-2 MG(E)
3
144
432
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
LT - DJ final - T12.xlsm
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
11/20/2013
11:17 PM
2
Dup. Occ
11
49
98
L&B TYPE BNLO1, TYPE L2
49
539
L&B TYPE BNLO1, TYPE L2
3
Occupancy
49
147
L&B TYPE BNLO1, TYPE L2
3
Occupancy
49
147
L&B TYPE BNLO1, TYPE L2
3
Occupancy
49
147
L&B TYPE BNLO1, TYPE L2
3
Occupancy
49
147
L&B TYPE BNLO1, TYPE L2
Page 33 of 103
Page 8 of 9
Wyoming FinAnswer Express Program
07/01/13 Effective Date
Project ID
You Can Now Use The Project
Information Tab
Lighting Coordinator
Dan Kuhl
Tool Prepared by
Dan Kuhl
Project Manager
Account Manager
V 070113.5.3
Customer Information
Processing Information
Construction Type
Project Name Dave Johnston Power Plant - Turbine Phase
Installation Address 1591 Tank Farm Rd
City, State, Zip Glenrock
WY
82637
Material
Labor
Other
Total Project Cost
$50,030.00
$6,710.00
$360.00
$57,100.00
Whole Building
Allowed Wattage
720,000
Space Type & Size
Contact, Title Brian Gangl
Phone, Email (307) 995-5193
[email protected]
Account, Meter, Rate
48T
Acct Holder
Preliminary
Project Cost
Business Name PacifiCorp Energy
Participant is:
Stage
Retrofit
Elect. User
Business Type
Calculation Method
1 Other
Building Owner
Other
Contractor Information
Contact
EEA Participant
2
FT
2
W/FT 2
FT 2
W/FT 2
FT 2
W/FT 2
2
W/FT 2
FT
Business Name
1,200,000
FT 2 1,200,000
Other
2
FT
0.60
0.60
W/FT
W/FT 2
Lighting Operation Schedule
Address
City, State, Zip
Phone, Email
Payee Information
Incentive Should Be Addressed To:
Business Name
Attention
Check Reference
# of Holidays Closed?
Day
A
0
Mon
24.0
Op Weeks Per Year
Tue
24.0
52
Wed
24.0
"S" is for a seasonal
Add/Edit
operational
schedule
Thu
24.0
Fri
24.0
S is for 0 hrs/year
Sat
24.0
Address
X is for 8760 hrs/year
Sun
24.0
City, State, Zip
Y is for 4380 hrs/year
Total
8,760
Eligibility Information
B
C
D
E
Additional Information
Business Name
Address
City, State, Zip
Account #
Meter Base #, Rate
LT - DJ final - Turbine.xlsm
Office Use Only
Import
Existing
Project
11/20/2013
EEA
Participant
Info
Email
Coordinator
Lighting
Catalog
LED
Policy
Report A
Problem
Page 1
Page 34 of 103
-10
-9
Category
-8
-7
-6
-4
-3
-2
-1
Add Fixture
Fixture
Remove Fixture
Lamp
Lamp (W)
-5
LED
Savings Information
Clear Filter
160
Lamp Qty
373,956 kWh Saved
Per Year
Build Fixture
Ballast
Reset
Factor
511W - CUST: LEDHB-511W
Lighting Power Density
94.8%
0.07 Existing
Better Than Code
LPD
0.03 Proposed
0.60 Code
Custom Fixture
Standard Incentive (15.4% of Cost Paid By Incentive)
Preliminary
Dave Johnston Power Plant - Turbine Phase
1
2
3
4
Exterior
Schedule
Line Number
4 Out Of 75 Lines Used
Existing
Space Description
Fixture
Unit 4
X Turbine Deck
MH-1000W-CWA
X Turbine Deck
HPS-400W
Interior
93
0
Exterior
80,145
0
86
Space
Wattage
Fixture
Qty
66
10
1,080
465
71,280
4,650
CUST: LEDHB-511W
LEDHB-160W
Qty
Controls
X Turbine Shed
MH-175W-CWA
10
215
2,150
6
X Turbine Shed
MH-250W-CWA
7
295
2,065
LT - DJ final - Turbine.xlsm
Interior
Fixture
Wattage
5
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
Proposed
FLT8CEEHB-32W x 6L x 4'-CEE
IS CEE H
FLT8CEEHB-32W x 6L x 4'-CEE
IS CEE H
11/20/2013
11:27 PM
0
Exterior
37,456
0
↓↓Project Tracking↓↓
Preliminary
Pre-Inspection
Agreement Needed
Contracted
Post-Inspection
Final Review Needed
Fixture
Wattage
Space
Wattage
66
10
511
160
33,726
1,600
Type HB6
Type HB1 - 160W
5
213
1,065
FHE Series- Type EHB3
5
213
1,065
FHE Series- Type EHB3
Controls
↓↓Project Notes↓↓
Page 35 of 103
Page 1 of 1
Wyoming FinAnswer Express Program
07/01/13 Effective Date
Project ID
You Can Now Use The Project
Information Tab
Lighting Coordinator
Dan Kuhl
Tool Prepared by
Dan
Project Manager
Account Manager
V 070113.5.3
Customer Information
Processing Information
Construction Type
Project Name Dave Johnston Power Plant - Industrial Phase
Installation Address 1591 Tank Farm Rd
City, State, Zip Glenrock
WY
82637
Material
Labor
Other
Total Project Cost
$1,959,440.00
$262,940.00
$14,020.00
$2,236,400.00
Whole Building
Allowed Wattage
720,000
Space Type & Size
Contact, Title Brian Gangl
Phone, Email (307) 995-5193
[email protected]
Account, Meter, Rate
48T
Acct Holder
Preliminary
Project Cost
Business Name PacifiCorp Energy
Participant is:
Stage
Retrofit
Elect. User
Business Type
Calculation Method
1 Other
Building Owner
Other
Contractor Information
Contact
EEA Participant
2
FT
2
W/FT 2
FT 2
W/FT 2
FT 2
W/FT 2
2
W/FT 2
FT
Business Name
1,200,000
FT 2 1,200,000
Other
2
FT
0.60
0.60
W/FT
W/FT 2
Lighting Operation Schedule
Address
City, State, Zip
Phone, Email
Payee Information
Incentive Should Be Addressed To:
Business Name
Attention
Check Reference
# of Holidays Closed?
Day
A
0
Mon
12.0
Op Weeks Per Year
Tue
12.0
52
Wed
12.0
"S" is for a seasonal
Add/Edit
operational
schedule
Thu
12.0
Fri
12.0
S is for 0 hrs/year
Sat
12.0
Address
X is for 8760 hrs/year
Sun
12.0
City, State, Zip
Y is for 4380 hrs/year
Total
4,380
Eligibility Information
B
C
D
E
Additional Information
Business Name
Address
City, State, Zip
Account #
Meter Base #, Rate
LT - DJ final - Industrial.xlsm
Office Use Only
Import
Existing
Project
11/20/2013
EEA
Participant
Info
Email
Coordinator
Lighting
Catalog
LED
Policy
Report A
Problem
Page 1
Page 36 of 103
-10
-9
-8
Category
-7
-6
-5
-4
-3
-2
-1
Add Fixture
LED
Fixture
Remove Fixture
Lamp
Savings Information
Clear Filter
Lamp (W)
Lamp Qty
3,662,878 kWh Saved
Per Year
Build Fixture
Ballast
Reset
Factor
213W - FLT8CEEHB-32W x 6L x 4'-CEE IS CEE H
Fluorescent Linear T8 CEE Highbay (32W x 6L x 4') 1 CEE Instant Start Ballast (BF > 1.0)
Standard Incentive (13.4% of Cost Paid By Incentive)
Preliminary
Lighting Power Density
66.7%
0.55 Existing
Better Than Code
0.20 Proposed
LPD
Exterior
Schedule
Line Number
Preliminary
Pre-Inspection
0.60 Code
Agreement Needed
Dave Johnston Power Plant - Industrial Phase
74 Out Of 200 Lines Used
1
↓↓Project Tracking↓↓
Existing
Space Description
Unit 4
Fixture
Interior
2966
Qty
0
Controls
Exterior
657,404
0
Fixture
Wattage
Space
Wattage
Proposed
Fixture
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
CUST: LEDHB-78W
FLT8CEE-28W x 2L x 4'-CEE
RS/PRS CEE N
Interior
2943
50
Exterior
240,597
0
Contracted
Post-Inspection
Final Review Needed
Fixture
Wattage
Space
Wattage
1
49
49
Vapor Tight -
2
78
156
Crouse Hines - Type RLB1
49
98
Surface Vapor Tight
Qty
Controls
↓↓Project Notes↓↓
2
X Elevator Room
ICMB-150W
1
150
150
3
X Drum Room
MH-175W-CWA
2
215
430
4
X Penthouse
ICMB-100W
2
72
144
5
X RCM
ICMB-200W
3
200
600
CUST: LEDPM-40W
3
40
120
6
ICMB-150W
1
150
150
30
30
MH-175W-CWA
1
215
215
1
73
73
Vapor Tight
ICMB-100W
ICMB-100W
5
9
72
72
360
648
CUST: LEDSI-30W
FLT8CEE-32W x 2L x 4'-CEE IS
CEE H
CUST: LEDSI-14W
CUST: LEDSI-14W
1
8
9
X West Drum Room
West Drum Room
X
Level 8
X Level 8 Under Boiler
X Level 8 Jelly Jar
Pipe Mount LED Industrial
Refracture Pack- Type RLB1
Jelly Jar - Type VTK
3
9
14
14
42
126
10
X Level 8
MH-175W-CWA
198
215
42,570
CUST: LEDHB-78W
198
78
15,444
11
X Level 8
55 Conveyors, Coal
X
MCC
X 55 "B" Conveyor
X 55 "B" Conveyor
X DA - 6
Level 5
X Old Scrubber
Old Scrubber Master
X
Level
Old Scrubber Master
X
Level
3 1/2 Outled, ODD
Feeder Deck,
X
Abandoned Stairs,
FD & ID Fans
X FD & ID Fans
X Unit #3 Bldg
X Unit #3 Bldg
X Unit #3 Bldg
MH-175W-CWA
200
215
43,000
CUST: LEDHB-78W
200
78
15,600
LED lamp
LED lamp
split line in 2 so savings- Type
RLB1
would calculate
MH-175W-CWA
50
215
10,750
CUST: LEDHB-78W
50
78
3,900
Type RLB1
MH-175W-CWA
MH-175W-CWA
MH-175W-CWA
23
23
4
215
215
215
4,945
4,945
860
CUST: LEDHB-78W
CUST: LEDHB-78W
CUST: LEDHB-78W
23
23
4
78
78
78
1,794
1,794
312
Fixture Mount OC -Type RLB1
Every Other Fixture - Type RLB1
Type RLB1
MH-175W-CWA
13
215
2,795
CUST: LEDHB-78W
13
78
1,014
Type RLB1
ICMB-100W
12
72
864
CUST: LEDSI-14W
12
14
168
LED lamp
HPS-250W
3
295
885
CUST: LEDHB-78W
3
78
234
Type RLB1
MH-175W-CWA
47
215
10,105
CUST: LEDHB-78W
47
78
3,666
Type RLB1
HPS-250W
MH-1000W-CWA
MH-400W-CWA
MH-175W-CWA
4
6
10
325
295
1,080
458
215
1,180
6,480
4,580
69,875
CUST: LEDHB-78W
CUST: LEDHB-511W
LEDHB-160W
CUST: LEDHB-78W
4
6
10
325
78
511
160
78
312
3,066
1,600
25,350
Type RLB1
Type HB6
Type HB1 -160W
Type RLB1
7
12
13
14
15
16
17
18
19
20
21
22
23
24
LT - DJ final - Industrial.xlsm
11/20/2013
11:30 PM
2
Integral
Integral
Page 37 of 103
Page 2 of 6
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
MH-175W-CWA
HPS-150W
MH-1000W-CWA
ICMB-100W
134
63
8
12
215
188
1,080
72
28,810
11,844
8,640
864
CUST: LEDHB-78W
CUST: LEDHB-78W
CUST: LEDHB-511W
CUST: LEDSI-14W
134
63
8
12
78
78
511
14
10,452
4,914
4,088
168
Type RLB1
Type RLB1
Type HB6
LED lamp
MH-175W-CWA
HPS-150W
ICMB-200W
ICMB-150W
MH-400W-CWA
HPS-150W
MH-175W-CWA
MH-175W-CWA
HPS-250W
MH-400W-CWA
MH-1000W-CWA
59
18
107
12
6
300
200
245
26
10
8
215
188
200
150
458
188
215
215
295
458
1,080
12,685
3,384
21,400
1,800
2,748
56,400
43,000
52,675
7,670
4,580
8,640
CUST: LEDHB-78W
CUST: LEDHB-78W
CUST: LEDHB-78W
CUST: LEDSI-30W
LEDHB-160W
CUST: LEDHB-78W
CUST: LEDHB-78W
CUST: LEDHB-78W
CUST: LEDWP-109W
LEDHB-160W
CUST: LEDWP-47W
59
18
107
12
6
300
200
245
26
10
8
78
78
78
30
160
78
78
78
109
160
47
4,602
1,404
8,346
360
960
23,400
15,600
19,110
2,834
1,600
376
Type RLB1
Type RLB1
Type RLB1
LED lamp
Type HB1-160W
Type RLB1
Type RLB1
Type RLB1
Type WP1
Type HB1-160W
Type WP1
MH-175W-CWA
HPS-150W
5
5
215
188
1,075
940
CUST: LEDHB-78W
CUST: LEDHB-78W
5
5
78
78
390
390
HPS-250W
MH-175W-CWA
HPS-150W
MH-175W-CWA
MH-175W-CWA
CUST: ICMB-120W
9
76
70
10
4
1
295
215
188
215
215
0
2,655
16,340
13,160
2,150
860
0
9
76
70
10
4
1
109
78
78
78
47
30
981
5,928
5,460
780
188
30
1
142
142
52
X Mine Garage
HPS-150W
2
188
376
53
X Storage
MH-175W-CWA
5
215
1,075
54
X Storage
MH-250W-CWA
2
295
590
55
X Repair Shop
MH-175W-CWA
2
215
430
56
X Repair Shop
MH-1000W-CWA
6
1,080
6,480
57
X Repair Shop
HPS-400W
6
465
2,790
58
X Repair Shop
MH-1000W-CWA
1
1,080
1,080
59
X Repair Shop
ICMG-500W
4
500
2,000
60
X Repair Shop
MH-400W-CWA
2
458
916
61
X Truck Repair Bays
Unit #1 & #2 Cooling
Tower
X Under Grate - MCC
X MCC Bldg
Precipitator Bldg
X Unit #1 & #2
X Hopper Level
X Ground Floor
MH-175W-CWA
3
215
645
CUST: LEDWP-109W
CUST: LEDHB-78W
CUST: LEDHB-78W
CUST: LEDHB-78W
CUST: LEDWP-47W
FCM-15W x 2L-MG
FLT8CEEHB-32W x 4L x 4'-CEE
IS CEE H
FLT8CEEHB-32W x 4L x 4'-CEE
IS CEE H
FLT8CEEHB-32W x 4L x 4'-CEE
IS CEE H
CUST: LEDWP-47W
FLT8CEEHB-32W x 6L x 4'-CEE
IS CEE H
FLT8CEEHB-32W x 6L x 4'-CEE
IS CEE H
FLT8CEEHB-32W x 6L x 4'-CEE
IS CEE H
FLT8CEEHB-32W x 6L x 4'-CEE
IS CEE H
FLT8CEEHB-32W x 6L x 4'-CEE
IS CEE H
MH-175W-CWA
MH-250W-CWA
MH-175W-CWA
3
6
295
215
885
1,290
MH-175W-CWA
MH-175W-CWA
MH-175W-CWA
98
60
18
215
215
215
21,070
12,900
3,870
62
63
64
65
66
67
68
X
X
X
X
X
X
Unit #2
Unit #2
Unit #2 & RLM
Sports Light Flood
Jelly Jars
Unit #1
Unit #1
Unit #1
RLM
Jelly Jars
Sports Lights
Basement
Unit #1
Unit #1
Unit #1
Unit #1
Shop Basement
Mezzanine
Switch Gear
Generator Pit
Unit #4 Mezzanine
Mezzanine
Mezzanine
Mezzanine
Floc Bldg
Insulator Shop
Training Bldg
LT - DJ final - Industrial.xlsm
4
Integral
142
568
4
Integral
Type RLB1
Type RLB1
Type WP2
Type RLB1
Type RLB1
Type RLB1
Type WP1
CFL or LED lamp
Remove both incandescent fixtures.
New -2 Lamp Strip fixture, TYPE
S1 & TYPE L1
New -2 Lamp Strip fixture, TYPE
S1 & TYPE L1
Type WP1
142
568
2
47
94
5
213
1,065
FHE Series -Type EHB3
5
213
1,065
FHE Series- Type EHB3
1
213
213
FHE Series- Type EHB3
5
213
1,065
FHE Series- Type EHB3
1
213
213
FHE Series-Type EHB3
0
215
0
Remove Three 175w MH
CUST: LEDWP-109W
CUST: LEDWP-47W
3
6
109
47
327
282
Type WP2
Type WP1
CUST: LEDHB-78W
CUST: LEDHB-78W
CUST: LEDHB-78W
98
60
18
78
78
78
7,644
4,680
1,404
Type RLB1
Type RLB1
Type RLB1
11/20/2013
11:30 PM
Page 38 of 103
Page 3 of 6
69
70
71
72
73
Diesel Generating
Room
X Diesel Fire Pump
X Chlorine Building
Chlorine Building X
Side Two RLM
X
X Fire Pump House
ICMB-200W
2
200
400
ICMB-200W
0
200
0
MH-175W-CWA
ICMB-200W
3
4
215
200
645
800
CUST: LEDHB-78W
CUST: LEDSI-30W
3
4
78
30
234
120
Type RLB1
Type VTK
ICMB-200W
2
200
400
CUST: LEDSI-30W
2
30
60
Type VTK
6
213
1,278
2
25
50
14
213
2,982
3
40
120
5
213
1,065
Typ HB2
MH-175W-CWA
6
215
1,290
FLT8CEEHB-32W x 6L x 4'-CEE
IS CEE H
ICMB-100W
2
72
144
FCM-25W-MG
75
76
Admin Bldg - 1st
Floor
X Electrical Room
Maintenance Bldg
77
X Open
MH-400W-CWA
18
458
8,244
78
X EM Trucks
Main Warehouse
Offices
HPS-100W
3
130
390
9
458
4,122
MH-400W-CWA
17
458
7,786
MH-400W-CWA
6
458
2,748
HPS-150W
129
188
MH-175W-CWA
177
ICMB-100W
40
74
79
80
X Down / Parts Drawer MH-400W-CWA
81
X
82
X
83
84
X
85
X
86
X
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
Warehouse Storage Back
Warehouse Storage Back
Conveyor Building
Conveyor to
Appleton, etc.
31, 33, 34 & 35
Sump
RLM 31, 33, 34 & 35
Sump
LT - DJ final - Industrial.xlsm
FLT8CEEHB-32W x 6L x 4'-CEE
IS CEE H
LEDWP-40W
Remove two 200w Incandescents
Consider Not Changing
CFL or LED lamp
FHE Series- Type EHB3
Type WP1
FLT8CEEHB-32W x 6L x 4'-CEE
IS CEE H
FLT8CEEHB-32W x 6L x 4'-CEE
IS CEE H
FLT8CEEHB-32W x 6L x 4'-CEE
IS CEE H
11
Integral
213
2,343
Two Outer aisles-Type HB2
6
Integral
213
1,278
Center aisle-Type HB2
24,252
CUST: LEDHB-78W
129
78
10,062
Type RLB1
215
38,055
CUST: LEDHB-78W
177
78
13,806
Type RLB1
72
2,880
CUST: LEDSI-14W
40
14
560
LED Lamp
11/20/2013
11:30 PM
Page 39 of 103
Page 4 of 6
Wyoming FinAnswer Express Program
07/01/13 Effective Date
Project ID
You Can Now Use The Project
Information Tab
Lighting Coordinator
Dan Kuhl
Tool Prepared by
Dan Kuhl
Project Manager
Account Manager
V 070113.5.3
Customer Information
Processing Information
Construction Type
Project Name Dave Johnston Power Plant - Exterior Phase
Installation Address 1591 Tank Farm Rd
City, State, Zip Glenrock
WY
82637
Material
Labor
Other
Total Project Cost
$257,800.00
$34,600.00
$1,800.00
$294,200.00
Whole Building
Allowed Wattage
720,000
Space Type & Size
Contact, Title Brian Gangl
Phone, Email (307) 995-5193
[email protected]
Account, Meter, Rate
48T
Acct Holder
Preliminary
Project Cost
Business Name PacifiCorp Energy
Participant is:
Stage
Retrofit
Elect. User
Business Type
Calculation Method
1 Other
Building Owner
Other
Contractor Information
Contact
EEA Participant
2
FT
2
W/FT 2
FT 2
W/FT 2
FT 2
W/FT 2
2
W/FT 2
FT
Business Name
1,200,000
FT 2 1,200,000
Other
2
FT
0.60
0.60
W/FT
W/FT 2
Lighting Operation Schedule
Address
City, State, Zip
Phone, Email
Payee Information
Incentive Should Be Addressed To:
Business Name
Attention
Check Reference
# of Holidays Closed?
Day
A
0
Mon
3.0
Op Weeks Per Year
Tue
3.0
52
Wed
3.0
"S" is for a seasonal
Add/Edit
operational
schedule
Thu
3.0
Fri
3.0
S is for 0 hrs/year
Sat
3.0
Address
X is for 8760 hrs/year
Sun
3.0
City, State, Zip
Y is for 4380 hrs/year
Total
1,095
Eligibility Information
B
C
D
E
Additional Information
Business Name
Address
City, State, Zip
Account #
Meter Base #, Rate
LT - DJ final - Exterior.xlsm
Office Use Only
Import
Existing
Project
11/20/2013
EEA
Participant
Info
Email
Coordinator
Lighting
Catalog
LED
Policy
Report A
Problem
Page 1
Page 40 of 103
-10
-9
Category
-8
-7
-6
-4
-2
-1
Remove Fixture
T5HO High Bay
Savings Information
Clear Filter
Lamp (W)
Lamp Qty
-3
Add Fixture
Fixture
Lamp
-5
Fluorescent
6
339,227 kWh Saved
Per Year
Build Fixture
Ballast
Reset
Factor
351W - FLT5HOHB-54W x 6L x 4'-3 RS/PRS H
Fluorescent Linear T5HO High Bay (54W x 6L x 4') 3 Rapid/Program Start Ballast (0.95 < BF < 1.10)
Standard Incentive (11.5% of Cost Paid By Incentive)
Preliminary
Lighting Power Density
99.5%
0.02 Existing
Better Than Code
0.00 Proposed
LPD
↓↓Project Tracking↓↓
Preliminary
Pre-Inspection
0.60 Code
Agreement Needed
Dave Johnston Power Plant - Exterior Phase
Contracted
Existing
Exterior
Schedule
Line Number
14 Out Of 266 Lines Used
Space
Wattage
Fixture
Qty
112
150
16,800
CUST: LEDSI-30W
37
215
7,955
HPS-400W
11
465
7
+ X
8
9
HPS-400W
10
+ Y
MH-175W-CWA
10 + Y
11 + Y
12 + Y
13
Emergency
14 + Y Generator Bldg Exterior
15
40 Annex Building
100' Pole Lights16 + Y
Exterior
70' Pole Lights17 + Y
Exterior
18
Conveyor Building
19 + Y Floods-Exterior
20 + Y Floods-Exterior
21 + Y Roadway-Exterior
345
0
345
0
Exterior
Post-Inspection
3,486
51,270
Final Review Needed
Fixture
Wattage
Space
Wattage
112
30
3,360
LED lamp
CUST: LEDHB-78W
37
78
2,886
Type RLB1
5,115
CUST: LEDPM-120W
11
120
1,320
Type RW1
465
4,650
CUST: LED Flood 121W
10
121
1,210
Flood- Type FL4
8
215
1,720
CUST: LEDHB-78W
8
78
624
Type RLB1
HPS-150W
19
188
3,572
CUST: LEDHB-78W
19
78
1,482
Type RLB1
MH-250W-CWA
2
295
590
CUST: LED Flood 121W
2
121
242
Type FL4
ICMB-100W
9
72
648
CUST: LEDSI-14W
9
14
126
LED Lamp
MH-175W-CWA
3
215
645
CUST: LEDHB-78W
3
78
234
Type RLB1
MH-1000W-CWA
32
1,080
34,560
CUST: LED HB 511W
32
511
16,352
MH-1000W-CWA
24
1,080
25,920
CUST: LED HB 511W
24
511
12,264
HPS-400W
HPS-250W
34
29
465
295
15,810
8,555
CUST: LED Flood - 179W
CUST: LED Flood 121W
34
29
179
121
6,086
3,509
HPS-200W
15
250
3,750
CUST: LEDPM-105W
15
105
1,575
+ Y Pole Lights-Exterior
Unit #4 Mezzanine
Outside of BldgExterior
Precipitator Bldg
Penthouse - Outdoor
River Intake Outdoors
Outside Flag Lights
Exterior Under
Canopy Lights
Interior
130,290
5
6
Proposed
Exterior
4
3
17,448
Fixture
Wattage
Space Description
Fixture
Unit #1
+ A Star Sign
ICMB-150W
Coal Belt between #1
+ X
MH-175W-CWA
& #2
Parking Lot-Exterior
1
2
Interior
Qty
Controls
22
23
24
25
LT - DJ final - Exterior.xlsm
11/20/2013
11:31 PM
Controls
↓↓Project Notes↓↓
Recommend new LED High Mast
Light fixture. Holophane or GE
Recommend new LED High Mast
Light fixture. Holophane or GE
Type FL5
Type FL4
Type AL1- Area Light/Pole mount Type III Dist.
Page 41 of 103
Page 2 of 4
Appendix C
Fixture Specification Sheets
Page 9
Page 42 of 103
D-Series Size 2
LED Wall Luminaire
Catalog
Number
DSX1 LED 30C 1000 40K 3TM MVOLT SPA DDBXD
Notes
Type
AL1
Hit the Tab key or mouse over the page to see all interactive elements.
Introduction
Specifications
Luminaire
Back Box (BBW)
18-1/2” Weight:
Width:
21 lbs
Width:
(9.5 kg)
(47.0 cm)
10”
Depth:
Depth:
(25.4 cm)
7-5/8”
Height:
Height:
(19.4 cm)
5-1/2” BBW
Weight:
1-1/2”
(3.8 cm)
4”
WALL
SCONCE
(Back
Box Wall) MOUNTING
WALL SCONCE BBW
(Back
BoxBBW
Wall)
MOUNTING
(10.2 cm)
W
D
1 lbs
(0.5 kg)
(14.0 cm)
5-1/2
H
For 3/4” NPT
side-entry
conduit
1-1/2
5-1/2
H
4
4
D
1-1/2
The D-Series Wall luminaire is a stylish, fully
integrated LED solution for building-mount
applications. It features a sleek, modern design
and is carefully engineered to provide long-lasting,
energy-efficient lighting with a variety of optical
and control options for customized performance.
With an expected service life of over 20 years of
nighttime use and up to 76% in energy savings
over comparable 400W metal halide luminaires,
the D-Series Wall is a reliable, low-maintenance
lighting solution that produces sites that are
exceptionally illuminated.
W
Ordering Information
EXAMPLE: DSXW2 LED 30C 700 40K T3M MVOLT DDBTXD
DSXW2 LED
Series
DSXW2 LED
Performance Package
LEDs
20C
30C
Distribution
20 LEDs
(two engines)
30 LEDs
(three engines)
Drive current
350
350 mA
530
530 mA
700
700 mA
1000
1000 mA (1 A)
T2S
T2M
T3S
T3M
T4M
TFTM
Type II Short
Type II Medium
Type III Short
Type III Medium
Type IV Medium
Forward Throw
Medium
Voltage
MVOLT 1
120 1
208 1
240 1
277 1
347 2
480 2
Mounting
Shipped included
(blank) Surface
mounting
bracket
Shipped separately3
BBW Surfacemounted
back box
(for conduit
entry)
Color temperature
30K
3000K
40K
4000K
50K
5000K
Control Options
Shipped installed
PE
Photoelectric cell,
button type 4
PER
NEMA twist-lock
receptacle only (no
controls)
DMG
0-10V dimming driver
(no controls)
DCR
Dimmable and controllable via ROAM®
(no controls) 5
PIRH
180° motion/ambient
light sensor, 15-30’
mtg ht 6
Other Options
Finish (required)
Shipped installed
SF
Single fuse
(120, 277, 347V) 7
DF
Double fuse
(208, 240, 480V) 7
HS
House-side
shield 3
DDBXD
DBLXD
DNAXD
Shipped separately
BSW
Bird-deterrent
spikes 3
WG
Wire guard 3
VG
Vandal guard 3
DBLBXD
DNATXD
NOTES
MVOLT driver operates on any line voltage from 120-277V (50/60 Hz). Specify 120, 208, 240 or 277
options only when ordering with fusing (SF, DF options), or photocontrol (PE option).
2 Available with 30 LED/700mA options only (DSXW2 LED 30C 700).
3 Also available as a separate accessory; see Accessories information.
4 Photocontrol (PE) requires 120, 208, 240 or 277 voltage option. Not available with motion/ambient light
sensors (PIR or PIRH).
5 Specifies a ROAM® enabled luminaire with 0-10V dimming capability; PER option required. Not
available with 347 or 480V. Additional hardware and services required for ROAM® deployment; must be
purchased separately. Call 1-800-442-6745 or email: [email protected]
6 Specifies the Sensor Switch SBR-6-ODP control; see Motion Sensor Guide for details. Includes ambient
light sensor. Not available with “PE” option (button type photocell). Dimming driver standard.
7 Single fuse (SF) requires 120, 277 or 347 voltage option. Double fuse (DF) requires 208, 240 or 480
voltage option.
8 Requires luminaire to be specified with PER option. Ordered and shipped as a separate line item.
DWHXD
DSSXD
DDBTXD
DWHGXD
DSSTXD
Dark bronze
Black
Natural
aluminum
White
Sandstone
Textured dark
bronze
Textured black
Textured natural
aluminum
Textured white
Textured
sandstone
Accessories
1
Ordered and shipped separately.
DLL127F 1.5 JU
Photocell - SSL twist-lock (120-277V) 8
DLL347F 1.5 CUL JU
Photocell - SSL twist-lock (347V) 8
DLL480F 1.5 CUL JU
Photocell - SSL twist-lock (480V) 8
SC U
Shorting cap 8
DSXWHS U
House-side shield (one per light engine)
DSXWBSW U
Bird-deterrent spikes
DSXW2WG U
Wire guard accessory
DSXW2VG U
Vandal guard accessory
DSXW2BBW
DDBXD U
Back box accessory
(specify finish)
One Lithonia Way • Conyers, Georgia 30012 • Phone: 800.279.8041 • Fax: 770.918.1209 • www.lithonia.com
© 2012-2013 Acuity Brands Lighting, Inc. All rights reserved.
Page 43 of 103
Performance Data
Lumen Ambient Temperature (LAT) Multipliers
Lumen Output
Use these factors to determine relative lumen output for average ambient temperatures
from 0-40°C (32-104°F).
Lumen values are from photometric tests performed in accordance with IESNA LM-79-08. Data is considered to be representative
of the configurations shown, within the tolerances allowed by Lighting Facts. Actual wattage may differ by +/- 8% when
operating between 120-480V +/- 10%. Contact factory for performance data on any configurations not shown here.
LEDs
Drive
Current
(mA)
530
Performance
Package
Dist.
Type
System
Watts
20C 530 --K
T2S
T2M
T3S
T3M
T4M
TFTM
T2S
T2M
T3S
T3M
T4M
TFTM
T2S
T2M
T3S
T3M
T4M
TFTM
T2S
T2M
T3S
T3M
T4M
TFTM
T2S
T2M
T3S
T3M
T4M
TFTM
T2S
T2M
T3S
T3M
T4M
TFTM
36 W
20C
700
20C 700 --K
47 W
(20 LEDs)
1000
20C 1000 --K
73 W
530
30C 530 --K
54 W
30C
700
30C 700 --K
71 W
(30 LEDs)
1000
30C 1000 --K
40K
(4000K, 70 CRI)
109 W
Photometric Diagrams
Ambient
50K
(5000K, 65 CRI)
Lumens
B
U
G
LPW
Lumens
B
U
G
LPW
3533
3437
3489
3545
3498
3495
4371
4252
4316
4386
4328
4324
5914
5754
5839
5935
5855
5851
5280
5137
5214
5298
5228
5223
6513
6337
6431
6536
6449
6444
8697
8462
8588
8728
8611
8604
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
2
2
1
2
1
2
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
2
1
1
1
1
1
2
1
1
1
2
1
2
2
2
1
2
1
2
2
2
1
2
2
2
2
2
2
2
2
3
2
2
98
95
97
98
97
97
93
90
92
93
92
92
81
79
80
81
80
80
98
95
97
98
97
97
92
89
91
92
91
91
80
78
79
80
79
79
3860
3755
3811
3873
3822
3819
4776
4647
4716
4793
4729
4725
6462
6287
6380
6484
6398
6393
5769
5613
5696
5789
5712
5707
7118
6925
7028
7143
7047
7042
9501
9244
9381
9534
9407
9399
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
2
2
1
2
1
1
2
2
2
2
2
2
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
2
1
1
1
2
1
2
2
2
1
2
2
2
2
2
1
2
1
2
2
2
2
2
2
3
2
2
2
2
2
3
2
2
107
104
106
108
106
106
102
99
100
102
101
101
89
86
87
89
88
88
107
104
105
107
106
106
100
98
99
101
99
99
87
85
86
87
86
86
32°F
1.02
10°C
20°C
25°C
30°C
40°C
50°F
68°F
77°F
86°F
104°F
1.01
1.00
1.00
1.00
0.98
Projected LED Lumen Maintenance
Data references the extrapolated performance projections for the DSXW2 LED 30C 1000
platform in a 25°C ambient, based on 10,000 hours of LED testing (tested per IESNA LM80-08 and projected per IESNA TM-21-11).
To calculate LLF, use the lumen maintenance factor that corresponds to the desired number
of operating hours below. For other lumen maintenance values, contact factory.
Operating Hours
0
25,000
50,000
100,000
Lumen Maintenance
Factor
1.0
0.95
0.92
0.87
Electrical Load
Current (A)
LEDs
20C
30C
Drive Current
(mA)
System
Watts
120
208
240
277
347
480
350
530
700
1000
350
530
700
1000
25 W
36 W
47 W
73 W
36 W
54 W
71 W
109 W
0.23
0.33
0.13
0.19
0.12
0.17
0.10
0.14
0.23
-
0.16
-
1
0
1
2
3
4
4
3
0.5 fc
2
1.0 fc
1
0
-1
-2
-3
T2M
-4
4
3
2
1
0
1
2
3
4
0.25
0.22
0.19
0.39
0.19
0.29
0.34
0.17
0.25
0.29
0.14
0.22
0.66
0.38
0.33
0.28
1.01
0.58
0.50
0.44
4
3
2
1
0
-1
-2
-3
T3M
-4
Distribution overlay comparison to 400W metal halide.
4
3
2
1
0
1
2
3
4
4
3
2
1
0
-1
-2
-3
T3S
-4
Test No. 22597P22 tested in accordance with
IESNA LM-79-08.
2
Test No. 22602P22 tested in accordance with
IESNA LM-79-08.
0.1 fc
3
Test No. 22700P22 tested in accordance with
IESNA LM-79-08.
4
0.44
0.68
0.33
0.50
To see complete photometric reports or download .ies files for this product, visit Lithonia Lighting’s D-Series Wall Size 2 homepage.
Isofootcandle plots for the DSXW2 LED 30C 1000 40K. Distances are in units of mounting height (25’).
LEGEND
Lumen Multiplier
0°C
LEGEND
DSXW2,
0.5 fc
TWF2,
0.5 fc
10’ W Sidewalk
LLDs:
TWF2 = 0.72
DSXW2 = 0.95
TWF2:
458W
DSXW2:
109W
DSXW2 LED 30C 40K 1000 T2M,
TWF2 400M Pulse, 25’ Mounting Ht
FEATURES & SPECIFICATIONS
INTENDED USE
The energy savings, long life and easy-to-install design of the D-Series Wall Size 2 make it the smart
choice for building-mounted doorway and pathway illumination for nearly any facility.
CONSTRUCTION
Two-piece die-cast aluminum housing has integral heat sink fins to optimize thermal management
through conductive and convective cooling. Modular design allows for ease of maintenance. The
LED driver is mounted to the door to thermally isolate it from the light engines for low operating
temperature and long life. Housing is completely sealed against moisture and environmental
contaminants.
FINISH
Exterior parts are protected by a zinc-infused Super Durable TGIC thermoset powder coat finish
that provides superior resistance to corrosion and weathering. A tightly controlled multi-stage
process ensures a minimum 3 mils thickness for a finish that can withstand extreme climate
changes without cracking or peeling. Available in textured and non-textured finishes.
OPTICS
Precision-molded proprietary acrylic lenses provide multiple photometric distributions tailored
specifically to building mounted applications. Light engines are available in 3000K (80 min. CRI),
4000K (70 min. CRI) or 5000K (65 min. CRI) configurations.
ELECTRICAL
Light engine(s) consist of 10 high-efficacy LEDs mounted to a metal-core circuit board to
maximize heat dissipation and promote long life (L87/100,000 hrs at 25°C). Class 1 electronic
drivers have a power factor >90%, THD <20%, and an expected life of 100,000 hours. Surge
protection device meets a minimum Category C Low (per ANSI/IEEE C62.41.2).
INSTALLATION
Included universal mounting bracket attaches securely to any 4” round or square outlet box
for quick and easy installation. Luminaire has a slotted gasket wireway and attaches to the
mounting bracket via corrosion-resistant screws.
LISTINGS
CSA certified to U.S. and Canadian standards. Rated for -40°C minimum ambient.
WARRANTY
Five year limited warranty. Full warranty terms located at www.acuitybrands.com/
CustomerResources/Terms_and_conditions.aspx.
Note: Specifications subject to change without notice.
One Lithonia Way • Conyers, Georgia 30012 • Phone: 800.279.8041 • Fax: 770.918.1209 • www.lithonia.com
DSXW2-LED
© 2012-2013 Acuity Brands Lighting, Inc. All rights reserved.
Rev. 5/30/13
Page 44 of 103
D-Series Size 1
LED Wall Luminaire
Catalog
Number
DSX1 LED 30C 1000 40K 3TM MVOLT SPA DDBXD
Notes
Type
AL1
Hit the Tab key or mouse over the page to see all interactive elements.
Introduction
Specifications
Luminaire
Back Box (BBW, ELCW)
13-3/4” Weight:
Width:
12 lbs
10”
Depth:
Depth:
(25.4 cm)
Height:
13-3/4” BBW
(34.9 cm) Weight:
4” ELCW
(10.2 cm) Weight:
Width:
(5.4 kg)
(34.9 cm)
6-3/8”
Height:
(16.2 cm)
D
W
13-3/4
4
H
6-3/8
6-3/8
FOR 3/4" NPT
SIDE-ENTRY CONDUIT
3-PLACES (BBW ONLY)
W
(4.5 kg)
(16.2 cm)
4
H
10 lbs
6-3/8”
D
13-3/4
5 lbs
(2.3 kg)
For 3/4” NPT side-entry
conduit (BBW only)
Ordering Information
FOR 3/4" NPT
SIDE-ENTRY CONDUIT
3-PLACES (BBW ONLY)
The D-Series Wall luminaire is a stylish, fully
integrated LED solution for building-mount
applications. It features a sleek, modern design
and is carefully engineered to provide long-lasting,
energy-efficient lighting with a variety of optical
and control options for customized performance.
With an expected service life of over 20 years of
nighttime use and up to 74% in energy savings
over comparable 250W metal halide luminaires,
the D-Series Wall is a reliable, low-maintenance
lighting solution that produces sites that are
exceptionally illuminated.
EXAMPLE: DSXW1 LED 20C 1000 40K T3M MVOLT DDBTXD
DSXW1 LED
Series
DSXW1 LED
Performance Package
LEDs
10C
20C
Distribution
10 LEDs
(one engine)
20 LEDs
(two engines)
Drive current
350
350 mA
530
530 mA
700
700 mA
1000
1000 mA (1 A)
T2S
T2M
T3S
T3M
T4M
TFTM
Type II Short
Type II Medium
Type III Short
Type III Medium
Type IV Medium
Forward Throw
Medium
Voltage
MVOLT 1
120 1
208 1
240 1
277 1
Mounting
Shipped included
(blank) Surface
mounting
bracket
BBW Surfacemounted
back box
(for conduit
entry)2
Color temperature
30K
3000K
40K
4000K
50K
5000K
Control Options
Shipped installed
PE
Photoelectric cell,
button type 3
DMG
0-10V dimming driver
(no controls)
PIR
180° motion/ambient
light sensor, <15’
mtg ht 4, 6
PIRH
180° motion/ambient
light sensor, 15-30’
mtg ht 5, 6
ELCW Emergency battery
backup (includes
external component
enclosure) 7
Other Options
Finish (required)
Shipped installed
SF
Single fuse
(120, 277V) 8
DF
Double fuse
(208, 240V) 8
HS
House-side
shield 9
DDBXD
DBLXD
DNAXD
Shipped separately
BSW
Bird-deterrent
spikes 9
WG
Wire guard 9
VG
Vandal guard 9
DBLBXD
DNATXD
NOTES
1
2
3
4
5
6
7
8
9
MVOLT driver operates on any line voltage from 120-277V (50/60 Hz). Specify 120, 208, 240 or 277
options only when ordering with fusing (SF, DF options), or photocontrol (PE option).
Back box ships installed on fixture. Cannot be field installed. Cannot be ordered as an accessory.
Photocontrol (PE) requires 120, 208, 240 or 277 voltage option. Not available with motion/ambient light
sensors (PIR or PIRH).
Specifies the Sensor Switch SBR-10-ODP control; see Motion Sensor Guide for details. Includes ambient
light sensor. Not available with “PE” option (button type photocell). Dimming driver standard.
Specifies the Sensor Switch SBR-6-ODP control; see Motion Sensor Guide for details. Includes ambient
light sensor. Not available with “PE” option (button type photocell). Dimming driver standard.
Not available with 20 LED/1000 mA configuration (DSXW1 LED 20C 1000).
Not compatible with conduit entry applications. Not available with BBW mounting option.
Single fuse (SF) requires 120 or 277 voltage option. Double fuse (DF) requires 208 or 240 voltage option.
Also available as a separate accessory; see Accessories information.
DWHXD
DSSXD
DDBTXD
DWHGXD
DSSTXD
Dark bronze
Black
Natural
aluminum
White
Sandstone
Textured dark
bronze
Textured black
Textured natural
aluminum
Textured white
Textured
sandstone
Accessories
Ordered and shipped separately.
DSXWHS U
House-side shield (one per light engine)
DSXWBSW U
Bird-deterrent spikes
DSXW1WG U
Wire guard accessory
DSXW1VG U
Vandal guard accessory
One Lithonia Way • Conyers, Georgia 30012 • Phone: 800.279.8041 • Fax: 770.918.1209 • www.lithonia.com
© 2013 Acuity Brands Lighting, Inc. All rights reserved.
Page 45 of 103
Performance Data
Lumen Ambient Temperature (LAT) Multipliers
Lumen Output
Use these factors to determine relative lumen output for average ambient temperatures
from 0-40°C (32-104°F).
Lumen values are from photometric tests performed in accordance with IESNA LM-79-08. Data is considered to be representative
of the configurations shown, within the tolerances allowed by Lighting Facts. Actual wattage may differ by +/- 8% when
operating between 120-480V +/- 10%. Contact factory for performance data on any configurations not shown here.
LEDs
Drive
Current
(mA)
530
Performance
Package
Dist.
Type
System
Watts
10C 530 --K
T2S
T2M
T3S
T3M
T4M
TFTM
T2S
T2M
T3S
T3M
T4M
TFTM
T2S
T2M
T3S
T3M
T4M
TFTM
T2S
T2M
T3S
T3M
T4M
TFTM
T2S
T2M
T3S
T3M
T4M
TFTM
T2S
T2M
T3S
T3M
T4M
TFTM
20 W
10C
700
10C 700 --K
27 W
(10 LEDs)
1000
10C 1000 --K
530
40 W
20C 530 --K
36 W
20C
700
20C 700 --K
47 W
(20 LEDs)
1000
20C 1000 --K
40K
(4000K, 70 CRI)
75 W
Photometric Diagrams
Ambient
50K
(5000K, 65 CRI)
Lumens
B
U
G
LPW
Lumens
B
U
G
LPW
1724
1729
1709
1753
1753
1766
2234
2241
2216
2272
2272
2289
2992
3001
2967
3043
3043
3066
3545
3556
3515
3606
3605
3632
4357
4370
4320
4431
4430
4464
5745
5763
5697
5843
5843
5887
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
2
1
1
2
2
1
2
2
2
86
86
85
88
88
88
83
83
82
84
84
85
75
75
74
76
76
77
98
99
98
100
100
101
93
93
92
94
94
95
77
77
76
78
78
78
1807
1812
1792
1838
1837
1851
2341
2349
2322
2381
2381
2399
3136
3146
3110
3189
3189
3213
3715
3727
3685
3779
3779
3807
4566
4580
4528
4644
4644
4678
6020
6039
5970
6123
6123
6169
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
1
2
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
2
2
1
2
2
2
2
2
2
90
91
90
92
92
93
87
87
86
88
88
89
78
79
78
80
80
80
103
104
102
105
105
106
97
97
96
99
99
100
80
81
80
82
82
82
32°F
1.02
10°C
20°C
25°C
30°C
40°C
50°F
68°F
77°F
86°F
104°F
1.01
1.00
1.00
1.00
0.98
Projected LED Lumen Maintenance
Data references the extrapolated performance projections for the DSXW1 LED 20C 1000
platform in a 25°C ambient, based on 10,000 hours of LED testing (tested per IESNA LM80-08 and projected per IESNA TM-21-11).
To calculate LLF, use the lumen maintenance factor that corresponds to the desired number
of operating hours below. For other lumen maintenance values, contact factory.
Operating Hours
0
25,000
50,000
100,000
Lumen Maintenance
Factor
1.0
0.95
0.93
0.88
Electrical Load
Current (A)
LEDs
10C
20C
Drive Current
(mA)
System
Watts
120
208
240
277
347
480
350
530
700
1000
350
530
700
1000
14 W
20 W
27 W
40 W
25 W
36 W
47 W
75 W
0.13
0.19
0.07
0.11
0.06
0.09
0.06
0.08
-
-
1
0
1
2
3
4
4
3
0.5 fc
2
1.0 fc
1
0
-1
-2
-3
T2M
-4
4
3
2
1
0
1
2
3
4
0.14
0.13
0.11
-
-
0.21
0.13
0.19
0.19
0.12
0.17
0.16
0.10
0.14
-
-
0.44
0.25
0.22
0.19
-
-
0.69
0.40
0.35
0.30
-
-
4
3
2
1
0
-1
-2
-3
T3M
-4
Distribution overlay comparison to 250W metal halide.
4
3
2
1
0
1
2
3
4
4
3
2
1
0
-1
-2
-3
T3S
-4
Test No. 22597P22 tested in accordance with
IESNA LM-79-08.
2
Test No. 22602P22 tested in accordance with
IESNA LM-79-08.
0.1 fc
3
Test No. 22601P22 tested in accordance with
IESNA LM-79-08.
4
0.25
0.37
0.23
0.33
To see complete photometric reports or download .ies files for this product, visit Lithonia Lighting’s D-Series Wall Size 1 homepage.
Isofootcandle plots for the DSXW1 LED 20C 1000 40K. Distances are in units of mounting height (15’).
LEGEND
Lumen Multiplier
0°C
LEGEND
DSXW1,
0.5 fc
TWF2,
0.5 fc
10’ W Sidewalk
LLDs:
TWF2 = 0.72
DSXW1 = 0.95
DSXW1:
75W
TWF2:
291W
DSXW1 LED 20C 40K 1000 T3M,
TWF2 250M Pulse, 15’ Mounting Ht
FEATURES & SPECIFICATIONS
INTENDED USE
The energy savings, long life and easy-to-install design of the D-Series Wall Size 1 make it the smart
choice for building-mounted doorway and pathway illumination for nearly any facility.
CONSTRUCTION
Two-piece die-cast aluminum housing has integral heat sink fins to optimize thermal management
through conductive and convective cooling. Modular design allows for ease of maintenance. The
LED driver is mounted to the door to thermally isolate it from the light engines for low operating
temperature and long life. Housing is completely sealed against moisture and environmental
contaminants.
FINISH
Exterior parts are protected by a zinc-infused Super Durable TGIC thermoset powder coat finish
that provides superior resistance to corrosion and weathering. A tightly controlled multi-stage
process ensures a minimum 3 mils thickness for a finish that can withstand extreme climate
changes without cracking or peeling. Available in textured and non-textured finishes.
OPTICS
Precision-molded proprietary acrylic lenses provide multiple photometric distributions tailored
specifi cally to building mounted applications. Light engines are available in 3000K (80 min. CRI),
4000K (70 min. CRI) or 5000K (65 min. CRI) configurations.
ELECTRICAL
Light engine(s) consist of 10 high-efficacy LEDs mounted to a metal-core circuit board to
maximize heat dissipation and promote long life (L88/100,000 hrs at 25°C). Class 1 electronic
drivers have a power factor >90%, THD <20%, and an expected life of 100,000 hours. Surge
protection device meets a minimum Category C Low (per ANSI/IEEE C62.41.2).
INSTALLATION
Included universal mounting bracket attaches securely to any 4” round or square outlet box
for quick and easy installation. Luminaire has a slotted gasket wireway and attaches to the
mounting bracket via corrosion-resistant screws.
LISTINGS
CSA certified to U.S. and Canadian standards. Rated for -40°C minimum ambient.
WARRANTY
Five year limited warranty. Full warranty terms located at www.acuitybrands.com/
CustomerResources/Terms_and_conditions.aspx.
Note: Specifications subject to change without notice.
One Lithonia Way • Conyers, Georgia 30012 • Phone: 800.279.8041 • Fax: 770.918.1209 • www.lithonia.com
DSXW1-LED
© 2013 Acuity Brands Lighting, Inc. All rights reserved.
Rev. 5/02/13
Page 46 of 103
Catalog
Number
Notes
FEATURES & SPECIFICATIONS
INTENDED USE - The AVRK series retrofit kits are designed to convert existing 4' and 8' fluorescent strip
fixtures to state of the art energy-efficient fluorescent lamp and ballast technology along with high
performance reflectors for enhanced light output. Retrofitting older fixtures can greatly reduce energy
consumption and lamp replacement costs while improving light. The channels are shipped fully assembled
and pre-wired to allow fast, easy installation with minimal labor. Choice of channel widths ensures
compatibility with the broadest range of existing fixtures. The AVRK strip reflector conversion kit maximizes
fixture efficiency and provides enhanced uniform light distribution.
Type
HB1
AVRK
CONSTRUCTION - One-piece 4' or 8' nominal channels are formed from rugged corrosion resistant aluminum
for durability and light weight. All channel aluminum is painted with high-reflectance white paint. Reflectors
are precision formed aluminum with highly reflective white paint or 95% reflective specular aluminum.
The AVRK is available in two channel widths designed to fit most commercial fluorescent strip fixtures, and
the kit installs with simple hand tools. The conversion kit includes a "quick access" aluminum ballast cover
secured to the channel with captive quarter-turn fasteners. The snap-in rotary lampholders, ballasts, and
ballast quick-disconnect plug are shipped prewired for quick installation. Reflector panels (4’ sections)
attach to channel with captive quarter-turn fasteners.
Assembled Strip retrofit kit
1 or 2 Lamp
4' or 8'
Energy saving T8
ELECTRICAL - Standard ballast is high-efficiency, CEE (Consortium for Energy Efficiency) qualified NEMA
premium, instant start, <10% THD, universal voltage and sound rated A. Suggested lamps are high-lumen,
long-life super T8 lamps which contribute to optimizing system performance. Optional program start and
step-dim bi-level ballasts are available as well as several ballast factor options to maximize energy savings
and to allow the amount of light to be balanced to the application. Rotary lampholders and ballast disconnect
plug are prewired to ballast assembly.
INSTALLATION - Two channel widths are available for optimum fit to the broadest range of commercial
strip fixtures. One-piece aluminum covers with snap-in rotary lampholders attach to the existing channel
using provided Tek screws. Ballast is factory mounted to the "quick access" plate and pre-wired to the
lampholders. After wiring connection is made to included ballast disconnect plug, ballast access plate
secures to channel cover with captive quarter-turn fasteners. Reflector panels (4’ sections) attach to channel
with captive quarter-turn fasteners.
2-5/8
(6.7)
2-1/4
(5.7)
Installation is designed for maximum speed and simplicity.
10-5/8
(27.0)
10-5/8
(27.0)
LISTING - UL classified for luminaire conversion, retrofit.
WARRANTY — 1-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx.
Note: Specifications subject to change without notice.
ORDERING INFORMATION
Example: AVRK8 2 32 CW42 1/4 BINP WHR
For shortest lead times, configure products using bold options.
F
Series
AVRK4
AVRK8
AVRKA4
AVRKA8
Number of lamps
4' long, no uplight
8' long, no uplight
4' long, 10% uplight
8' long, 10% uplight
1
2
Wattage
32
Width
CW42
CW50
Ballast configuration
AVRK4 / AVRKA4
(blank) 1 or 2-lamp ballast
AVRK8 / AVRKA8
(blank) Two 2-lamp ballast
1/4
One 4-lamp ballast
Ballast type
BINP
BIHP
BILP
BPNP
BPHP
BPLP
BSNP1
Reflector type
WHR
SSR
Notes
1 Not available as 1/4.
2 AVRK channels and reflectors will ship separately for
field installation. Example:
(qty 1) AVRK8 2 32 CW42 BINP SSR ships as
(qty 1) AVRK8 2 32 CW42 1/4 BINP L/REFL
(qty 2) AVRK 4FT SSR REFL
FLUORESCENT
Page 47 of 103
AVRK
Catalog
Number
Notes
FEATURES & SPECIFICATIONS
INTENDED USE — Ideal where high brightness and good illumination levels are required such as retail,
light industrial and warehouses.
Attributes: Available in one lamp or two lamp configuration.
Type
HB1
General-Purpose Strip
CONSTRUCTION — Heavy-duty channel, die-formed from code-gauge steel.
Sturdy channel cover secured by captive quarter-turn latch for easy access to wireway.
C
Combination endplate/channel connector furnished with each fixture.
Finish: Five-stage iron phosphate pretreatment ensures superior paint adhesion and rust resistance. Painted
parts finished with high-gloss, baked white enamel.
ELECTRICAL — Thermally protected, resetting, Class P, UL Listed and CSA Certified ballast is standard.
Sound rating depends on lamp/ballast combination.
2’, 3’, 4', 6’ and 8' length
1 or 2 lamps
AWM, TFN, THHN wire throughout, rated for required temperatures.
INSTALLATION — For unit or row installations, surface or suspended mounting.
LISTINGS — UL listed to US and Canadian safety standards. Optional: Mexico NOM.
Specifications
Length:
24” (61.0)
36” (91.4)
48” (121.9)
72” (182.9)
96” (243.8)
Width:
4-3/8” (11.1)
Fixture Depth: 2-1/16” (5.2)
Damp location listed.
Listed for 25 degree C ambient temperature.
WARRANTY — 1-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx .
Note: Specifications subject to change without notice.
Actual performance may differ as a result of end-user environment and application.
2-1/16
(5.2)
2-1/16
(5.2)
4-3/8
(11.1)
4-3/8
(11.1)
All dimensions are inches (centimeters) unless otherwise specified.
ORDERING INFORMATION
Example: C 2 32 MVOLT GEB10IS
Lead times will vary depending on options selected. Consult with your sales representative.
C
Series
Number of lamps
C
General-purpose strip
For tandem double length unit,
add prefix T. Example: TC
1
2
lamp not included
Lamp type
T8
17
25
32
48T8
96T8
Voltage
17W T8 (24”)
25W T8 (36”)
32W T8 (48”)
38W T8 (48”)
59W T8 slimline (96”)
T12 Slimline
36
30W slimline (36”)
48
38W slimline (48”)
72
55W slimline (72”)
96
75W slimline (96”)
HO
24HO
36HO
48HO
48T8HO
72HO
72T8HO
96HO
96T8HO
35W T12 800mA (24”)1
45W T12 800mA (36”)1
60W 800mA (48”)
44W T8 (48”)
85W 800mA (72”)
65W T8 (72”)
110W 800mA (96”)
86W 380mA (96”)
MVOLT2
120
277
347
Others available
Options
GEB
GEB10IS
GEB10RS
GEB10PS
BILP
BINP
Electronic ballasts, <20%THD4
Electronic ballasts, <10%THD, instant start2
Electronic ballast, <10%THD, rapid start3
Electronic ballast, <10%THD, programmed start
High-efficiency ballast, .78bf (low), instant start
T8 high-performance ballast, .88bf (normal), instant start
BIHP
1/4
T8 high-performance ballast, 1.20bf (high), instant start
One four-lamp ballast5
EL
GLR
GMF
PLR_
Emergency battery pack (nominal 300 lumens)6
Internal fast-blow fuse (add X for external)6
Internal slow-blow fuse (add X for external)6
Plug-in wiring; specify 1, 2, or 3 branch circuits and hot wires (A = Black, B = Red, C = Blue, AB or AC)
TILW
CSA
NOM
AL
Tandem in-line wiring
CSA Certified (only required for 347V)
NOM Certified
Aluminum housing; white enamal finish
Accessories: Order as separate catalog number.
SQ_
1B
CONLGC
WGCUN NST
HC36
HRC®
Swivel stem hanger (specify length in 2” increments)
Ceiling spacer (adjusts from 1-1/2” to 2-1/2” from ceiling)
12” screw-on channel connector
Wireguard, 4’ white 7
Chain hangers (1 pair, 36” long)
Hooker T-bar hanger (flush to ceiling)
HRC1®
WGCSMR48
WGCASR48
CSMR 48
CASR 48
Hooker T-bar hanger (1-1/2” from ceiling)
Wireguard, 4’ white for symmetric reflector7
Wireguard, 4’ white for asymmetric reflector7
Symmetric reflector, 4’ white, 7” aperture7
Asymmetric reflector, 4’ white, 5-3/4” wide7
Notes
1.
Only avaialble with AL option.
2.
MVOLT standard for 120-277V applications, 50-60 mhz operation.
Some options require voltage specified.
3.
347V, simline lamps only.
4.
Slimline and HO lamps only.
5.
Not available in slimline.
6.
Specify voltage.
7.
Order two for 8’ fixtures.
Page 48 of 103
INDUSTRIALC
C General-Purpose Strip
MOUNTING DATA
DIMENSIONS
Hooker® (HRC) and (HC) Hangers - minimum two per channel (unit and row).
48”, 72”, and 96” have only two 7/8” K.O.’s 6” from each end.
24” and 36” have only two 7/8” K.O.’s 3-1/4 from each end.
For unit or row installation, surface or suspended mounting.
Unit installation — Minimum of two hangers required.
Row installation — Two hangers per channel required one per fixture plus one per row of CONLGC installed.
All dimensions in inches (centimeters) unless otherwise specified. Subject to change without notice.
See ACCESSORIES below for hanging devices.
24
(61.0)
D
4-3/8
(11.1)
HC36
4-1/4
(10.8)
E
2-15/16
(7.5)
2-1/16
(5.2)
E
4-1/4
(10.8)
4-3/8
(11.1)
2-1/2
(6.4)
4-3/8
(11.1)
6
(15.2)
D
E
E
F
F
D
E
48
(121.9)
10
(125.4)
E
3-1/4
(8.3)
E D
F
D
6
(15.2)
3-1/4
(8.3)
H
D
D
F
E
6
(15.2)
48
(121.9)
96
(243.8)
D
4-3/8
(11.1)
E
D
E
6
(15.2)
6
(15.2)
D
6
(15.2)
D = 11/16 (17) Dia.K.O.
E = 7/8 (22) Dia.K.O.
F = 1-1/4 (32) Dia.K.O.
H = 2 (51) Dia.K.O.
D
48
(121.9)
4-1/4
(10.8)
4-3/8
(11.1)
3-1/4
(8.3)
H
E
4-1/4
(10.8)
6
(15.2)
D
2-15/16
(7.5)
36
(91.4)
F
6
(15.2)
4-3/8
(11.1)
2-1/16
(5.2)
4-3/8
(11.1)
D
E
E
3-1/4
(8.3)
6
(15.2)
D
3-1/4
(8.3)
D
H
E
E
D
D
F
6
(15.2)
48
(121.9)
4-1/4
(10.8)
E
PHOTOMETRICS
Calculated using the zonal cavity method in accordance with IESNA LM41 procedure. Floor reflectances are 20%. Lamp configurations shown are typical.
All data based on 25°C. Full photometric data on these and other configurations available upon request.
C 2 96
TEST NO: LTL 18310
LUMENS PER LAMP: 6300
C 2 32
TEST NO: LTL 5181
LUMENS PER LAMP: 2900
RCR
80%
50% 30% 10%
106 106 106
89 84 79
76 68 62
65 57 50
57 48 42
51 42 35
45 36 30
41 32 26
37 29 23
34 26 20
31 23 18
pf
pc
pw
0
1
2
3
4
5
6
7
8
9
10
50%
50% 30% 10%
93 93 93
78 74 71
66 61 56
57 51 45
50 43 38
44 37 32
40 33 28
36 29 24
33 26 21
30 23 19
28 21 17
RCR
Coefficients of Utilization
20%
70%
50% 30% 10%
102 102 102
85 80 76
72 66 60
62 55 49
55 47 40
48 40 34
43 35 29
39 31 25
35 28 22
32 25 20
30 23 18
pf
pc
pw
0
1
2
3
4
5
6
7
8
9
10
Coefficients of Utilization
20%
70%
50% 30% 10%
98 98 98
82 78 74
70 64 59
61 54 48
53 46 40
47 39 34
42 34 29
38 30 25
35 27 22
32 25 20
29 22 18
80%
50% 30% 10%
103 103 103
86 82 78
74 67 61
64 56 49
56 47 41
49 41 35
44 36 30
40 32 26
36 28 23
33 25 20
30 23 18
Zonal Lumen Summary
Zone Lumens % Lamp % Fixture
0° - 30° 1785.8 14.2
15.7
0° - 40° 3042.4 24.1
26.8
0° - 60° 5944.0 47.2
52.3
0° - 90° 9027.5 71.6
79.4
90° - 180° 2341.8 18.6
20.6
0° - 180° 11369.4 90.2
100.0
Zonal Lumen Summary
Zone Lumens % Lamp % Fixture
15.6
14.5
0° - 30° 842.1
26.7
0° - 40° 1435.8 24.8
52.2
0° - 60° 2810.1 48.4
81.0
0° - 90° 4362.5 75.2
19.0
90° - 180° 1021.0 17.6
100.0
0° - 180° 5383.6 92.8
Energy (Calculated in accordance with NEMA standard LE-5)
Energy (Calculated in accordance with NEMA standard LE-5)
ANNUAL
LAMP
LAMP
BALLST
ENERGY
DESCRIPTION LUMENS FACTOR
COST*
86.2
$2.79
(2) T8 F32
2900
.88
*Comparative yearly lighting energy cost per 1000 lumens.
LER.FL
WATTS
55
ANNUAL
LAMP
LAMP
ENERGY
DESCRIPTION LUMENS
COST*
C 2 32 MVOLT GEB10IS
77.6
$3.09
F32T8/735
2800
C 2 32 MVOLT BILP
93.6
$2.56
F32T8/835/HT8
3100
*Comparative yearly lighting energy cost per 1000 lumens.
ORDERING
INFORMATION
LER.FL
INDUSTRIAL:
One Lithonia Way Conyers, GA 30012
50%
50% 30% 10%
90 90 90
75 72 69
64 59 55
56 49 44
49 42 37
43 37 31
39 32 27
35 28 24
32 25 21
29 23 19
27 21 17
Phone: 800-315-4963 Fax: 770-929-8789
BALLAST
FACTOR
WATTS
.88
.78
59
48
C
www.lithonia.com
of Rev.
103
© 1996-2012 Acuity Brands Lighting, Inc.Page
All rights49
reserved.
04/18/13
STR-LWY-2M-AA-IP-07–12
Type RW1
STR-LWY 2M AA 07 E UL SV 525 IP
LEDway® IP66 Street Light – Type II Medium – Adjustable Arm Mount – 70–120 LEDs
Product Description
Luminaire housing is all aluminum construction. Standard luminaire utilizes
terminal block for power input suitable for #2–#14 AWG wire. Adjustable
mounting arm is rugged die cast aluminum and mounts to a 2" (51mm) IP,
2.375" (60mm) O.D. tenon. Two axis T-level included to ensure level installation
when desired.
Performance Summary
Light Engine
Adjustable Fitter
Housing
Utilizes BetaLED® Technology
Patented NanoOptic® Product Technology
Made in the U.S.A. of U.S. and imported parts
CRI: Minimum 70 CRI
Latches
(Tool-less Entry)
CCT: 5700K (+/- 500K) Standard, 4000K (+/- 300K)
Limited Warranty†: 10 years on luminaire/10 years on Colorfast DeltaGuard® finish
EPA and Weight: Reference EPA and Weight spec sheet
Field Installed Accessories
XA-BRDSPK90 (70-90 LEDs)
XA-XSLBLS90 (70-90 LEDs)
XA-BRDSPK120 (100-120 LEDs)
XA-XSLBLS120 (100-120 LEDs)
Dimension
Measurement
07-09
"A"
26.8" (685mm)
07-09
"B"
36.6" (930mm)
10-12
"A"
33.1" (842mm)
10-12
"B"
42.9" (1089mm)
External Backlight Shield
Bird Spikes for Housing
Ordering Information
Example: STR-LWY-2M-AA-07-E-UL-SV-525-IP-OPTIONS
2M
AA
Product
Optic
Mounting
STR-LWY
2M
AA
Type II Adjustable
Medium
Arm
E
LED
Count
(x10)
07
08
09
10
11
12
10.6"
(269mm)
LED Count
(x10)
XA-BRDSPKHSG
STR-LWY
“B”
4.7"
(121mm)
Accessories
Bird Spikes for Light Engine
Cover
“A”
IP –
Version
Voltage
E
UL
Universal
120–277V
UH
Universal
347–480V
Color
Options*
Drive
Current
SV
Silver
(Standard)
BK
Black
BZ
Bronze
PB
Platinum
Bronze
WH
White
525
525mA
700
700mA
Options
IP IP66 Classification
40K 4000K Color Temperature
- Color temperature per luminaire
DIM 0–10V Dimming
- Control by others
- Refer to dimming spec sheet for details
- Can't exceed specified drive current
F Fuse
- Not available with all ML options. Refer to
ML spec sheet for availability with ML options
- When code dictates fusing, use time delay fuse
HL Hi/Low (175/350/525 Dual Circuit Input)
- Refer to ML spec sheet for details
- Sensor not included
ML Multi-Level
- Refer to ML spec sheet for details
N No Quick Disconnect Harness or Leveling Bubble
- Standard product features unless N option is
specified
PD Power Door
- All connections between door and luminaire are
shipped unconnected from the factory; door release
spring included to open door automatically when the
latches are released
R NEMA Photocell Receptacle
- Not available with all ML options. Refer to
ML spec sheet for availability with ML options
- Photocell by others
- Intended for downlight applications at 0˚ tilt
SC Door Safety Tether
- Stainless steel aircraft cable
UTL Utility
- Includes exterior wattage label that reflects
watts for the drive current selected. The ability to
exceed selected drive current will be disabled
† See www.cree.com/lighting/products/warranty for warranty terms.
* Light engine portion of extrusion is not painted and will remain natural aluminum regardless of color selection.
Rev. Date 03/22/2013
www.cree.com/lighting
T (800) 236-6800
F (262) 504-5415
Page 50 of 103
STR-LWY-2M-AA-IP-07–12
Product Specifications
Photometry
All published luminaire photometric testing performed to IESNA LM-79-08
standards by a NVLAP certified laboratory.
Construction & Materials
• Housing is all aluminum construction
• Terminal block for power input suitable for #2–#14 AWG wire
7430
150˚
• Adjustable mounting arm is rugged die cast aluminum and mounts to a
2" (51mm) IP, 2.375" (60mm) O.D. tenon. Two axis T-level included to
ensure level installation if desired
150˚
120' 100' 80' 60' 40' 20'
80'
5573
120˚
120˚
3715
• Exclusive Colorfast DeltaGuard® finish features an E-Coat epoxy primer
with an ultra-durable powder topcoat, providing excellent resistance to
corrosion, ultraviolet degradation and abrasion. Standard is silver. Bronze,
black, white, and platinum bronze are also available
0'
20' 40' 60' 80' 100' 120'
24.4
75˚
60'
18.3
40'
12.2
20'
.1
.2 .5 1
6.1
2
0'
1858
90˚
90˚
20'
0m
CURB LINE
6.1
40'
12.2
18.3
60'
80'
36.6 30.5 24.4 18.3 12.2 6.1
60˚
Electrical System
• Input Voltage: 120–277V or 347–480V, 50/60Hz, Class 1 drivers
60˚
30˚
• Power Factor: > 0.9 at full load
• Quick disconnect harness suitable for mate and break under load
provided on power feed to driver for ease of installation
Position of vertical plane
of maximum candlepower.
Candlepower Trace: Vertical plane through
30ºcandlepower.
horizontal angle of maximum
CESTL Test Report #: 2013-0025
STR-LWY-2M-**-06-E-UL-700-40K
Initial Delivered Lumens: 10,706
• Total Harmonic Distortion: < 20% at full load
24.4
6.1 12.2 18.3 24.4 30.5 36.6
0m
STR-LWY-2M-**-09-E-UL-700
Mounting Height: 25' (7.6m) A.F.G.
Initial Delivered Lumens: 16,967
Initial FC at grade
• Integral 10kV surge suppression protection standard
• To address inrush current, slow blow fuse or type C/D breaker should be
used
120' 100' 80' 60' 40' 20'
80'
Regulatory & Voluntary Qualifications
60'
• cULus Listed
40'
20'
• Suitable for wet locations
0'
20' 40' 60' 80' 100' 120'
24.4
75˚
18.3
12.2
.1
.2
.5 1
6.1
2
0'
• Enclosure rated IP66 per IEC 60529 when ordered without R or ML
options
20'
0m
CURB LINE
6.1
40'
12.2
18.3
60'
• Consult factory for CE Certified products
80'
36.6 30.5 24.4 18.3 12.2 6.1
• Certified to ANSI C136.31-2001, 3G bridge and overpass vibration
standards
0m
24.4
6.1 12.2 18.3 24.4 30.5 36.6
Position of vertical plane
of maximum candlepower.
• 10kV surge suppression protection tested in accordance with IEEE/ANSI
C62.41.2
STR-LWY-2M-**-12-E-UL-700
Mounting Height: 25' (7.6m) A.F.G.
Initial Delivered Lumens: 22,607
Initial FC at grade
• Luminaire and finish are endurance tested to withstand 5,000 hours of
elevated ambient salt fog as defined in ASTM Standard B 117
• Product qualified on the DesignLights Consortium (“DLC”) Qualified
Products List (“QPL”) when ordered without full backlight control shield
• RoHS Compliant
• Meets Buy American requirements within ARRA
IES Files
To obtain an IES file specific to your project consult:
http://www.cree.com/lighting/tools-and-support/exterior-ies-configuration-tool
Lumen Output, Electrical, and Lumen Maintenance Data
Type II Medium Distribution
LED
Count
(x10)
5700K
Initial
Delivered
Lumens
TOTAL CURRENT
4000K
BUG
Ratings*
Per TM-15-11
Initial
Delivered
Lumens
BUG
Ratings*
System Watts
120–277V
System Watts
347–480V
Per TM-15-11
07
08
09
10
11
12
10,653
12,120
13,573
15,166
16,629
18,086
B2
B3
B3
B3
B3
B3
U0
U0
U0
U0
U0
U0
G2 10,258
G3 11,671
G3 13,071
G3
14,604
G3
16,013
G3
17,416
B2
B3
B3
B3
B3
B3
U0
U0
U0
U0
U0
U0
G2
G3
G3
G3
G3
G3
07
08
09
10
11
12
13,316
15,150
16,967
18,958
20,786
22,607
B3
B3
B3
B3
B3
B3
U0
U0
U0
U0
U0
U0
G3 12,823
G3 14,589
G3 16,338
G3
18,256
G3
20,016
G3
21,770
B3
B3
B3
B3
B3
B3
U0
U0
U0
U0
U0
U0
G3
G3
G3
G3
G3
G3
525mA @ 25˚C (77˚F)
120V
208V
240V
277V
347V
480V
120
139
149
167
182
197
124
140
156
172
188
204
1.01
1.17
1.26
1.41
1.54
1.67
0.60
0.69
0.74
0.83
0.89
0.96
0.54
0.62
0.66
0.73
0.79
0.85
0.49
0.56
0.59
0.65
0.70
0.75
0.37
0.41
0.46
0.50
0.55
0.59
0.28
0.31
0.34
0.38
0.41
0.44
163
182
203
227
248
267
165
186
207
229
250
274
1.37
1.54
1.72
1.92
2.10
2.26
0.80
0.90
0.99
1.11
1.21
1.30
0.71
0.79
0.87
0.97
1.05
1.13
0.63
0.70
0.78
0.86
0.93
1.00
0.48
0.54
0.60
0.67
0.73
0.80
0.36
0.40
0.45
0.49
0.53
0.58
700mA @ 25˚C (77˚F)
50K Hours Projected
Lumen Maintenance
Factor
@ 15˚C (59˚F)**
93%
91%
* For more information on the IES BUG (Backlight-Uplight-Glare) Rating visit www.iesna.org/PDF/Erratas/TM-15-11BugRatingsAddendum.pdf, Vaild with no tilt.
** For recommended lumen maintenance factor data see TD-13. Calculated L70 based on 10,000 hours LM-80-08 testing: > 150,000 hours in accordance with guidelines describing "successors to previously
tested subcomponents" (Section 5) per Sep 9, 2011 ENERGY STAR guidelines.
See http://www.energystar.gov/ia/partners/prod_development/new_specs/downloads/luminaires/ENERGY_STAR_Final_Lumen_Maintenance_Guidance.pdf.
© 2013 Cree, Inc. All rights reserved. For informational purposes only. Content is subject to
change. See www.cree.com/patents for patents that cover these products. Cree®, the Cree logo,
LEDway®, BetaLED®, NanoOptic®, and Colorfast DeltaGuard® are registered trademarks, and the
BetaLED Technology logo is a trademark of Cree, Inc.
www.cree.com/lighting
T (800) 236-6800
F (262) 504-5415
Page 51 of 103
Champ® Pro PVM Series
Luminaires
2L
UL/cUL Listed
NEMA 4X
IP66
Ideal for general high bay/low bay illumination
The Champ® Pro PVM Family
Standard Materials:
Champ® Pro PVM Series Luminaires are
designed to provide full-spectrum, crisp,
white light with a true IES type V distribution.
Five versions of the PVM Series are available,
providing ideal solutions for a wide range of
applications.
• Lamp housing and adapter – die cast
aluminum with Corro-free™ epoxy
powder coat
• Lens – heat- and impact-resistant glass
Typical Energy
Savings / Lifetime
PVM3L
PVM5L
PVM7L
PVM9L
PVM11L
Up to 70%
reduction in energy
costs and 60,000
hours of continuous
operation!
70W-100W
100W-150W
150W-175W
175W-200W
200W-400W
• Gaskets – silicone
• External hardware – stainless steel
Champ Equivalent
Pro PVM HID
Model
Luminaire
®
• Factory-sealed, no external seals required
Certifications and
Compliances:
•
•
•
•
•
UL1598
UL1598A
cUL
NEMA 4X; IP66
DesignLights Consortium® approved
for select models (refer to Ordering
Information for details)
Drivers:
Model
3L - 9L
11L
Standard
Option 1
Option 2
90-305 VAC, 50 / 60 Hz; 108-250 VDC
347 VAC Model
480 VAC Model
100-240, 277 VAC
347 VAC Kit Available
480 VAC Kit Available
Electrical Ratings:
LED System:
• High brightness light emitting diode (LED)
arrays
• Color temperature: 3000K (CRI 82) where
a warmer color is preferred and 5600K
(CRI 65) where a cooler color is required
• Advanced heat sink design ensures LED
does not exceed manufacturer’s
temperature ratings across all specified
ambient conditions
PVM3L
PVM5L
PVM7L
PVM9L
PVM11L
Voltage Range, VAC
100-277V
100-277V
100-277V
100-277V
100-240, 277V
Frequency
50 / 60 Hz
50 / 60 Hz
50 / 60 Hz
50 / 60 Hz
50 / 60 Hz
Input Power
46 Watts
60 Watts
78 Watts
94 Watts
134 Watts
Input Amps (Max.)
0.5
0.7
0.8
0.98
1.7
Voltage Range, VDC
108-250
108-250
108-250
108-250
Not Available
Power Factor
>0.90
>0.90
>0.90
>0.90
>0.90
2L
Ordering Information:
Mounting Style 3L Series†
5L Series†
7L Series†
9L Series†
11L Series†
Luminaire Less
PVM3LDM2/UNV1
Mounting Module
PVM5LDM2/UNV1
PVM7LDM2/UNV1
PVM9LDM2/UNV1
PVM11LDM1/UNV
PVM5L2ADM2/UNV1
PVM7L2ADM2/UNV1
PVM9L2ADM2/UNV1
PVM11L2ADM1/UNV
3
/4" Pendant
PVM3L2ADM2/UNV1
1" Pendant
PVM3L3ADM2/UNV1
PVM5L3ADM2/UNV1
PVM7L3ADM2/UNV1
PVM9L3ADM2/UNV1
PVM11L3ADM1/UNV
/4" Cone Pendant PVM3L2BDM2/UNV1
PVM5L2BDM2/UNV1
PVM7L2BDM2/UNV1
PVM9L2BDM2/UNV1
PVM11L2BDM1/UNV
1" Cone Pendant
PVM3L3BDM2/UNV1
PVM5L3BDM2/UNV1
PVM7L3BDM2/UNV1
PVM9L3BDM2/UNV1
PVM11L3BDM1/UNV
/4" Flexible
Pendant
PVM3L2HADM2/UNV1 PVM5L2HADM2/UNV1 PVM7L2HADM2/UNV1 PVM9L2HADM2/UNV1 PVM11L2HADM1/UNV
/4" Ceiling Mount
Thru Feed
PVM3L2CDM2/UNV1
PVM5L2CDM2/UNV1
PVM7L2CDM2/UNV1
PVM9L2CDM2/UNV1
PVM11L2CDM1/UNV
1" Ceiling Mount
PVM3L3CDM2/UNV1
Thru Feed
PVM5L3CDM2/UNV1
PVM7L3CDM2/UNV1
PVM9L3CDM2/UNV1
PVM11L3CDM1/UNV
3
3
3
/4" Wall Mount
Thru Feed
PVM3L2TWDM2/UNV1 PVM5L2TWDM2/UNV1 PVM7L2TWDM2/UNV1 PVM9L2TWDM2/UNV1 PVM11L2TWDM1/UNV
1" Wall Mount
Thru Feed
PVM3L3TWDM2/UNV1 PVM5L3TWDM2/UNV1 PVM7L3TWDM2/UNV1 PVM9L3TWDM2/UNV1 PVM11L3TWDM1/UNV
3
11/2" Stanchion 25° PVM3LJDM2/UNV1
PVM5LJDM2/UNV1
PVM7LJDM2/UNV1
PVM9LJDM2/UNV1
PVM11LJDM1/UNV
PVM3LPDM2/UNV1
PVM5LPDM2/UNV1
PVM7LPDM2/UNV1
PVM9LPDM2/UNV1
PVM11LPDM1/UNV
11/2" Stanchion
†DesignLights Consortium approved models. Cool white only. 3L through 9L models approved at 120V only. For 120 VAC option, replace
DM2/UNV1 with DM2/120*. 11L model approved at 120-277V.
For 347 VAC option, replace DM2/UNV1 with DM3/347. For 480 VAC option, replace DM2/UNV1 with DM4/480. NOTE: Requires additional
enclosure for use with 11L series.
For warm white color temperature, use W designation after luminaire style (Example: PVM3LWDM2/UNV1). NOTE: Not available for 9L series.
*5 year limited warranty. Refer to page 2 of the D-0413 authorized distributor price book for Cooper Crouse-Hinds standard Terms and Conditions.
2
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Cooper Crouse-Hinds
Page 52 of 103
UL/cUL Listed
NEMA 4X
IP66
Champ® Pro PVM Series
Luminaires
2L
Ideal for general high bay/low bay illumination
Options:
Description
Wire guard with captive mounting hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Trunnion mount with redundant pin locking mechanism . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Quick Clip for quick installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Diffused lens reduces glare in applications where the user may have direct visual contact with the light source . . . . . . . . . . . . . . .
Teflon coating on lens for additional shatter protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Polycarbonate lens available in applications where glass is prohibited . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Suffix
P3001
S812 K1
S890
S891
S896
S903
Dimensions:
Pendant
Ceiling
11.6
293
Wall
Stanchion
Cone Pendant
2.0
51
9.2
235
11N
11L
Ø 10.2
258
11M
Family Tree:
2L
Weights:
Net Luminaire Weight:
17.8 lb.
8.07 kg.
Mounting Module add (lb.)
Pendant
Cone Pendant
Flexible Pendant
Ceiling
Wall
Angle Stanchion
Straight Stanchion
1.25
4.00
1.50
2.75
4.50
3.50
4.50
0.57
1.81
0.68
1.25
2.04
1.59
2.04
Ambient Temperature:
Champ® Pro PVM Model
Max. Temp. ºC
PVM3L
PVM5L
PVM7L
PVM9L
PVM11L
55
55
55
55
40
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Page 53 of3 103
Copyright© 2013 Cooper Crouse-Hinds
Champ® Pro PVM Series
Luminaires
2L
UL/cUL Listed
NEMA 4X
IP66
Ideal for general high bay/low bay illumination
Photometric Data:
Champ® Pro 78 Watt* - PVM7L
DISTANCE TO MOUNTING HEIGHT
Isofootcandle chart shows illuminance in
footcandles at ground level
CANDLEPOWER
DISTRIBUTION (IN
(IN CANDELAS)
CANDELA
DISTRIBUTION
CANDELAS)
3
2
1
0
-1
600
0
-2
0
800
1,000
0
-3
-3
0
1,200
-2
-1
0
1
2
3
1,400
0
ISOFOOTCANDLE CHART
0
1,600
Footcandle Values for Isofootcandle Lines
0
1,800
2,000
0
A
2,200
0
2L
Mtg.
Hgt.
CANDELAS
ZONAL LUMENS
VERTICAL
ANGLE
ZONE
WITH
LUMENS
FRONT SIDE
% LUMEN
0
2245
0-10
212
4%
5
2234
10-20
612
10%
15
2167
20-30
941
15%
25
2041
30-40
1155
18%
35
1846
40-50
1207
19%
45
1566
50-60
1077
17%
55
1207
60-70
764
12%
65
775
70-80
286
5%
75
251
80-90
13
0%
85
0
90-100
0
0%
90
0
100-120
0
0%
Total
6267
100%
B
A
C
B
D
E
F
C
D
E
F
8’
31.25 15.63
7.81
3.13
1.56
0.78
10’
20.00 10.00
5.00
2.00
1.00
0.50
12’
13.89
6.94
3.47
1.39
0.69
0.35
16’
7.81
3.91
1.95
0.78
0.39
0.20
20’
5.00
2.50
1.25
0.50
0.25
0.13
LUMEN OUTPUT FOR CHAMP® LED LUMINAIRES
Luminaire Series System Watts
PVM3L
46
PVM5L
60
PVM7L
78
PVM9L
94
PVM11L
134
Lumens
3748
4654
6267
7085
8880
*Testing performed in accordance with IES LM-79-08.
4
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Cooper Crouse-Hinds
Page 54 of 103
Champ® Pro PVM Series
Luminaires
2L
UL/cUL Listed
NEMA 4X
IP66
Ideal for general high bay/low bay illumination
The Champ® Pro PVM Family
Standard Materials:
Champ® Pro PVM Series Luminaires are
designed to provide full-spectrum, crisp,
white light with a true IES type V distribution.
Five versions of the PVM Series are available,
providing ideal solutions for a wide range of
applications.
• Lamp housing and adapter – die cast
aluminum with Corro-free™ epoxy
powder coat
• Lens – heat- and impact-resistant glass
Typical Energy
Savings / Lifetime
PVM3L
PVM5L
PVM7L
PVM9L
PVM11L
Up to 70%
reduction in energy
costs and 60,000
hours of continuous
operation!
70W-100W
100W-150W
150W-175W
175W-200W
200W-400W
• Gaskets – silicone
• External hardware – stainless steel
Champ Equivalent
Pro PVM HID
Model
Luminaire
®
• Factory-sealed, no external seals required
Certifications and
Compliances:
•
•
•
•
•
UL1598
UL1598A
cUL
NEMA 4X; IP66
DesignLights Consortium® approved
for select models (refer to Ordering
Information for details)
Drivers:
Model
3L - 9L
11L
Standard
Option 1
Option 2
90-305 VAC, 50 / 60 Hz; 108-250 VDC
347 VAC Model
480 VAC Model
100-240, 277 VAC
347 VAC Kit Available
480 VAC Kit Available
Electrical Ratings:
LED System:
• High brightness light emitting diode (LED)
arrays
• Color temperature: 3000K (CRI 82) where
a warmer color is preferred and 5600K
(CRI 65) where a cooler color is required
• Advanced heat sink design ensures LED
does not exceed manufacturer’s
temperature ratings across all specified
ambient conditions
PVM3L
PVM5L
PVM7L
PVM9L
PVM11L
Voltage Range, VAC
100-277V
100-277V
100-277V
100-277V
100-240, 277V
Frequency
50 / 60 Hz
50 / 60 Hz
50 / 60 Hz
50 / 60 Hz
50 / 60 Hz
Input Power
46 Watts
60 Watts
78 Watts
94 Watts
134 Watts
Input Amps (Max.)
0.5
0.7
0.8
0.98
1.7
Voltage Range, VDC
108-250
108-250
108-250
108-250
Not Available
Power Factor
>0.90
>0.90
>0.90
>0.90
>0.90
2L
Ordering Information:
Mounting Style 3L Series†
5L Series†
7L Series†
9L Series†
11L Series†
Luminaire Less
PVM3LDM2/UNV1
Mounting Module
PVM5LDM2/UNV1
PVM7LDM2/UNV1
PVM9LDM2/UNV1
PVM11LDM1/UNV
PVM5L2ADM2/UNV1
PVM7L2ADM2/UNV1
PVM9L2ADM2/UNV1
PVM11L2ADM1/UNV
3
/4" Pendant
PVM3L2ADM2/UNV1
1" Pendant
PVM3L3ADM2/UNV1
PVM5L3ADM2/UNV1
PVM7L3ADM2/UNV1
PVM9L3ADM2/UNV1
PVM11L3ADM1/UNV
/4" Cone Pendant PVM3L2BDM2/UNV1
PVM5L2BDM2/UNV1
PVM7L2BDM2/UNV1
PVM9L2BDM2/UNV1
PVM11L2BDM1/UNV
1" Cone Pendant
PVM3L3BDM2/UNV1
PVM5L3BDM2/UNV1
PVM7L3BDM2/UNV1
PVM9L3BDM2/UNV1
PVM11L3BDM1/UNV
/4" Flexible
Pendant
PVM3L2HADM2/UNV1 PVM5L2HADM2/UNV1 PVM7L2HADM2/UNV1 PVM9L2HADM2/UNV1 PVM11L2HADM1/UNV
/4" Ceiling Mount
Thru Feed
PVM3L2CDM2/UNV1
PVM5L2CDM2/UNV1
PVM7L2CDM2/UNV1
PVM9L2CDM2/UNV1
PVM11L2CDM1/UNV
1" Ceiling Mount
PVM3L3CDM2/UNV1
Thru Feed
PVM5L3CDM2/UNV1
PVM7L3CDM2/UNV1
PVM9L3CDM2/UNV1
PVM11L3CDM1/UNV
3
3
3
/4" Wall Mount
Thru Feed
PVM3L2TWDM2/UNV1 PVM5L2TWDM2/UNV1 PVM7L2TWDM2/UNV1 PVM9L2TWDM2/UNV1 PVM11L2TWDM1/UNV
1" Wall Mount
Thru Feed
PVM3L3TWDM2/UNV1 PVM5L3TWDM2/UNV1 PVM7L3TWDM2/UNV1 PVM9L3TWDM2/UNV1 PVM11L3TWDM1/UNV
3
11/2" Stanchion 25° PVM3LJDM2/UNV1
PVM5LJDM2/UNV1
PVM7LJDM2/UNV1
PVM9LJDM2/UNV1
PVM11LJDM1/UNV
PVM3LPDM2/UNV1
PVM5LPDM2/UNV1
PVM7LPDM2/UNV1
PVM9LPDM2/UNV1
PVM11LPDM1/UNV
11/2" Stanchion
†DesignLights Consortium approved models. Cool white only. 3L through 9L models approved at 120V only. For 120 VAC option, replace
DM2/UNV1 with DM2/120*. 11L model approved at 120-277V.
For 347 VAC option, replace DM2/UNV1 with DM3/347. For 480 VAC option, replace DM2/UNV1 with DM4/480. NOTE: Requires additional
enclosure for use with 11L series.
For warm white color temperature, use W designation after luminaire style (Example: PVM3LWDM2/UNV1). NOTE: Not available for 9L series.
*5 year limited warranty. Refer to page 2 of the D-0413 authorized distributor price book for Cooper Crouse-Hinds standard Terms and Conditions.
2
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Cooper Crouse-Hinds
Page 55 of 103
UL/cUL Listed
NEMA 4X
IP66
Champ® Pro PVM Series
Luminaires
2L
Ideal for general high bay/low bay illumination
Options:
Description
Wire guard with captive mounting hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Trunnion mount with redundant pin locking mechanism . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Quick Clip for quick installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Diffused lens reduces glare in applications where the user may have direct visual contact with the light source . . . . . . . . . . . . . . .
Teflon coating on lens for additional shatter protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Polycarbonate lens available in applications where glass is prohibited . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Suffix
P3001
S812 K1
S890
S891
S896
S903
Dimensions:
Pendant
Ceiling
11.6
293
Wall
Stanchion
Cone Pendant
2.0
51
9.2
235
11N
11L
Ø 10.2
258
11M
Family Tree:
2L
Weights:
Net Luminaire Weight:
17.8 lb.
8.07 kg.
Mounting Module add (lb.)
Pendant
Cone Pendant
Flexible Pendant
Ceiling
Wall
Angle Stanchion
Straight Stanchion
1.25
4.00
1.50
2.75
4.50
3.50
4.50
0.57
1.81
0.68
1.25
2.04
1.59
2.04
Ambient Temperature:
Champ® Pro PVM Model
Max. Temp. ºC
PVM3L
PVM5L
PVM7L
PVM9L
PVM11L
55
55
55
55
40
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Page 56 of3 103
Copyright© 2013 Cooper Crouse-Hinds
Champ® Pro PVM Series
Luminaires
2L
UL/cUL Listed
NEMA 4X
IP66
Ideal for general high bay/low bay illumination
Photometric Data:
Champ® Pro 78 Watt* - PVM7L
DISTANCE TO MOUNTING HEIGHT
Isofootcandle chart shows illuminance in
footcandles at ground level
CANDLEPOWER
DISTRIBUTION (IN
(IN CANDELAS)
CANDELA
DISTRIBUTION
CANDELAS)
3
2
1
0
-1
600
0
-2
0
800
1,000
0
-3
-3
0
1,200
-2
-1
0
1
2
3
1,400
0
ISOFOOTCANDLE CHART
0
1,600
Footcandle Values for Isofootcandle Lines
0
1,800
2,000
0
A
2,200
0
2L
Mtg.
Hgt.
CANDELAS
ZONAL LUMENS
VERTICAL
ANGLE
ZONE
WITH
LUMENS
FRONT SIDE
% LUMEN
0
2245
0-10
212
4%
5
2234
10-20
612
10%
15
2167
20-30
941
15%
25
2041
30-40
1155
18%
35
1846
40-50
1207
19%
45
1566
50-60
1077
17%
55
1207
60-70
764
12%
65
775
70-80
286
5%
75
251
80-90
13
0%
85
0
90-100
0
0%
90
0
100-120
0
0%
Total
6267
100%
B
A
C
B
D
E
F
C
D
E
F
8’
31.25 15.63
7.81
3.13
1.56
0.78
10’
20.00 10.00
5.00
2.00
1.00
0.50
12’
13.89
6.94
3.47
1.39
0.69
0.35
16’
7.81
3.91
1.95
0.78
0.39
0.20
20’
5.00
2.50
1.25
0.50
0.25
0.13
LUMEN OUTPUT FOR CHAMP® LED LUMINAIRES
Luminaire Series System Watts
PVM3L
46
PVM5L
60
PVM7L
78
PVM9L
94
PVM11L
134
Lumens
3748
4654
6267
7085
8880
*Testing performed in accordance with IES LM-79-08.
4
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Cooper Crouse-Hinds
Page 57 of 103
Type L2
FO28/841/XP/XL/ECO3
www.sylvania.com
OCTRON® 800 XP® XL ECOLOGIC®3
EXtended Performance EXtended Life Fluorescent Lamps
Key Features & Benefits
• Available in full wattage (32W) and reduced wattage SUPERSAVER® types
• Energy savings compared to standard 32W T8 lamp
– Up to 12.5% with the 28W XP/XL/SS
– Up to 22% with the 25W XP/XL/SS
• Operate 800 XP XL SUPERSAVER
lamps on SYLVANIA’s QUICKTRONIC® PROStart® programmed rapid start ballasts
– 84,000 hours average life @ 12 hours per start
• SUPERSAVER 25W and 28W types
meet CEE reduced wattage T8 specifications
• Up to 96% mean lumens
• Dimmable (see application note 4)
• Lead-free and RoHS compliant
• Made in USA
• Retrofit lamp for existing T8 instant start systems
– Up to 75,000 hours average life @ 12 hours per start
SYLVANIA OCTRON 800 XP XL ECOLOGIC3 lamps feature eXtended
Life benefits of up to 75,000 hours life on instant start ballasts and
84,000 hours life on programmed rapid start ballasts. The life ratings
reflect up to 88% longer life than T8 XP or XV lamps, which is the
equivalent of an additional 8 years of maintenance-free lighting for
typical operating cycles of 4,000 hours per year.
OCTRON 800 XP XL 32W lamps deliver 14% more light than standard
700 series T8 lamp on normal ballast factor, instant start electronic
ballasts. OCTRON 800 XP XL SUPERSAVER lamps provide up to 22%
energy savings over standard 32 watt OCTRON lamps. Combining
these lamps with QUICKTRONIC high efficiency instant start, low
power ballasts will result in up to 42% energy savings over energy
saving T12 magnetically ballasted fluorescent systems. Pair with
QUICKTRONIC electronic ballast for the industry’s first and most
comprehensive QUICK 60+® System Warranty.
SYLVANIA OCTRON T8 ECOLOGIC3 fluorescent lamps pass the Federal Toxicity Characteristic Leaching Procedure (TCLP1)
criteria for classification as non-hazardous waste in most states2.
ECOLOGIC3 represents a more comprehensive approach to sustainability encompassing high efficiency, long life and
RoHS/TCLP compliance.
Complies with European Union Restriction of Hazardous Substances Directive (Directive 2002/95/EC)
1. TCLP test results are based on NEMA LL Series standards and are available on request.
2. Lamp disposal regulations may vary; check your local & state regulations.
Product Offering
Lamp Type
OCTRON 800 XP XL
FO32/800/XP/XL/ECO3
OCTRON 800 XP XL SUPERSAVER
FO28/800XP/XL/SS/ECO3
FO32/25W/800/XP/XL/SS/ECO3
Wattage
CCT
32
3500K, 4100K & 5000K
28
25
3000K, 3500K, 4100K & 5000K
3500K & 4100K
Application Information
Applications
Application Notes
• Education
• Healthcare
• Industrial
• Office
• Retail
1. SUPERSAVER (SS) lamps are recommended to be used on T8 F32 Instant or Programmed Rapid Start ballasts with minimum open circuit voltage of 550V RMS
at the lamp.
a. Electronically ballasted fixture configurations which operate lamps remotely, such as Master/Satellite applications, can cause reduction of lamp open circuit
voltage, in the remote fixture, below the minimum required for reliable lamp starting. For more information, please call 1-800-LIGHTBULB and ask for Ballast
Technical Assistance or call your fixture manufacturer.
b. Not recommended to be used: (1) in remotely ballasted fixtures with lamp open circuit voltages below 550V, (2) in air handling fixtures, (3) on low power factor
ballasts or (4) inverter operated emergency lighting systems unless any of the above equipment is specifically listed for SUPERSAVER (SS) lamps. Any of the above
situations could result in lamp starting and stabilization problems, or system compatibility issues.
2. If a 28W SUPERSAVER lamp is exposed to drafts and/or the ambient temperature falls below 60°F (70°F for 25W lamp), striation (a rhythmic pulsing pattern of light
running down the tube) and/or reduction in lamp brightness may occur. While visually disconcerting, neither behavior is damaging to the lamp and removing the
cause (draft or temperature) will return the lamp to normal operation.
3. Fixture must conform to ANSI C78.81 – 2005 requirements for luminaire design.
4. Contact OSRAM SYLVANIA for approved dimming ballasts.
FL083R6 1-13
Page 58 of 103
Fixture Description:
Sample Specification
Type
Project/Job:
SYLVANIA lamp:
SYLVANIA ballast:
Notes:
Ordering Information
Item
Ordering
Initial Mean
Number
Abbreviation
WattsBulb Base LumensLumens1 lm/W
32 T8 Med Bi-Pin 2950
2830
92
21576 FO32/835/XP/XL/ECO3
21577 FO32/841/XP/XL/ECO3
32 T8 Med Bi-Pin 2950
2830
92
22002 FO32/850/XP/XL/ECO3
32 T8 Med Bi-Pin 2950
2830
92
28 T8 Med Bi-Pin 2600
2470
93
22166 FO28/835/XP/XL/SS/ECO3
22167 FO28/841/XP/XL/SS/ECO3
28 T8 Med Bi-Pin 2600
2470
93
28 T8 Med Bi-Pin 2600
2470
93
22326 FO28/850/XP/XL/SS/ECO3
22349 FO32/25W/830/XP/XL/SS/ECO3 25 T8 Med Bi-Pin 2400 2280 96 22222 FO32/25W/835/XP/XL/SS/ECO3 25 T8 Med Bi-Pin 2400
2280
96
22223 FO32/25W/841/XP/XL/SS/ECO3 25 T8 Med Bi-Pin 2400
2280
96
Avg. Rated Life
Programmed
Instant Start
Rapid Start
3 hrs/ 12 hrs 3 hrs/ 12 hrs/
start start
start start
36,000 52,000 65,000 67,000
36,000 52,000 65,000 67,000
36,000 52,000 65,000 67,000
50,000 75,000 80,000 84,000
50,000 75,000 80,000 84,000
50,000 75,000 80,000 84,000
50,000 75,000 80,000 84,000
50,000 75,000 80,000 84,000
50,000 75,000 80,000 84,000
CCT CRI
3500K 85
4100K 85
5000K 81
3500K 85
4100K 85
5000K 81
3000K 85
3500K 85
4100K 85
1. Measured at 40% of rated life.
Ordering Guide
FO
28
/
8
41
FluorescentWattage CRI ≥ 81
OCTRON
25, 28, 32
XP/XL
Color
Temperature
30 = 3000K
35 = 3500K
41 = 4100K
50 = 5000K
/
SS
/
ECO3
EXtendedSUPERSAVERECOLOGIC3
Performance
EXtended
Life
Lamp Dimensions
(A) Max.
Overall
Length (in.)
FO32, FO28, 47.78"
FO32/25W
(B) Base Face
to Opposite
Pin (in.)
Min. 47.41"
Max. 47.5"
(C) Max. Base
Face to Base
Face (in.)
47.22"
(D) Max.
Outside
Diameter (in.)
1.1"
A
B
C
Related Literature
For maximum energy savings consider pairing with the following electronic ballasts:
Ballast Technology Applications & Specification Guide (Literature Code: ECS-SPECGUIDE2013)
QUICKTRONIC® High Efficiency NEMA Premium Guide (Literature Code: ECS112)
QUICK 60+ System Warranty (Literature Code: ECS140)
/sylvania
/sylvania
SYLVANIA, ECOLOGIC, OCTRON, PROStart, QUICK 60+, SUPERSAVER and XP are registered trademarks of OSRAM SYLVANIA Inc.
SEE THE WORLD IN A NEW LIGHT is a registered trademark of OSRAM SYLVANIA Inc.
QUICKTRONIC is a registered trademark of OSRAM GmbH.
Specifications subject to change without notice.
D
Lamp(s) shall be OCTRON® XP® XL (32W,
SUPERSAVER® XL 28W, SUPERSAVER XL 25W)
ECOLOGIC®3 4-foot lamp(s) having medium
bi-pin bases. Lamp(s) shall be designed to pass
the Federal TCLP test in force at the time of
manufacture. Lamp(s) shall have an average
rated life of (36,000 - 67,000 hrs on 32W and
50,000 - 84,000 hrs on 28W and 25W) at
3 hours per start when operated on T8 (instant
start, programmed start ballasts), (2950, 2600,
2400) initial lumens, 96% lumen maintenance
on the 32W and 95% lumen maintenance on the
28 and 25W a correlated color temperature of
(3000K, 3500K, 4100K, 5000K) and a CRI of
(85, 81). The OCTRON ECOLOGIC3 lamp(s) shall
be operated on QUICKTRONIC® electronic, high
frequency ballasts with complete system
warranty from the manufacturer covering
lamps and ballast.
United States
OSRAM SYLVANIA
100 Endicott Street
Danvers, MA 01923
1-800-LIGHTBULB
Trade
Phone:800-255-5042
Fax:800-255-5043
National Accounts
Phone:800-562-4671
Fax:800-562-4674
OEM/Special Markets
Phone:800-762-7191
Fax:800-762-7192
Retail
Phone:800-842-7010
Fax:800-842-7011
SYLVANIA Lighting Services
Phone:800-323-0572
Fax:800-537-0784
Display/Optic
Phone: 888-677-2627
Fax: 855-543-1043
Canada
OSRAM SYLVANIA LTD.
2001 Drew Road
Mississauga, ON L5S 1S4
1-800-LIGHTBULB
Trade
Phone:800-263-2852
Fax:800-667-6772
OEM/Special Markets/Display/Optic
Phone:800-265-2852
Fax:800-667-6772
Retail
Phone:800-720-2852
Fax:800-667-6772
SYLVANIA Lighting Services
Phone:800-663-4268
Fax:866-239-1278
Mexico
OSRAM MEXICO
Tultitlan/Edo de Mexico
Phone:011-52-55-58-99-18-50
ENCELIUM Technologies
United States
Phone:201-928-2400
Fax:201-928-4028
Canada
Phone:905-731-7678
Fax: 905-731-1401
Page 59 of 103
www.sylvania.com
© 2013 OSRAM SYLVANIA 1-13 Photography Specification Data
Type L1
FO32/841/XPS/ECO3
www.sylvania.com
OCTRON® XPS® ECOLOGIC®3
EXtended Performance Super Fluorescent Lamps
Key Features & Benefits
• Highest lumen 4-foot OCTRON T8 lamps
•94% Lumen maintenance
• Also available in 2-foot (FO17) and
3-foot (FO25) sizes
•Lead free glass
• Longer lamp life than standard T8 lamps
– 40,000 hours rated life @ 12 hrs/start on instant start ballast
•TCLP compliant
•Made in USA
•QUICK 60+® system warranty
when paired with QUICKTRONIC®
electronic ballasts
•Meets CEE Standards
– 42,000 hours rated life @ 12 hrs/start on programmed
rapid start ballasts
SYLVANIA OCTRON Extended Performance Super ECOLOGIC3 (XPS)
lamps deliver the highest performance of all OCTRON lamps with
initial and mean lumens that are up to 11% higher and substantially
longer lamp life than standard T8 fluorescent lamps. These lamps
are available in 2, 3, and 4-foot lengths, in a choice of correlated
color temperatures with high lumen maintenance of 94%. When OCTRON XPS ECOLOGIC lamps are operated on existing
instant start ballasts as a retrofit lamp, they deliver higher lumen
output than the installed system. In new installations paired with
QUICKTRONIC PSX ballasts, 2-lamp systems deliver light levels
comparable to 3-lamp 700 series T8 lamps, while maximizing
energy savings and lamp life. SYLVANIA OCTRON 800 XPS ECOLOGIC3 fluorescent lamps are designed
to satisfy the Federal Toxicity Characteristic Leaching Procedure (TCLP1)
criteria for classification as non-hazardous waste in most states.2
ECOLOGIC3 represents a more comprehensive approach to sustainability
encompassing high efficiency, long life and RoHS/TCLP compliance.
T CLP test results are based on NEMA LL Series standards
and are available on request.
2
Regulations may vary. Check your local and state regulations.
1
Product Offering
Ordering
Nominal
Abbreviation
Watts
Length (in)
FO17/800/XPS/ECO3
17
24
FO25/800/XPS/ECO3
25
36
FO32/800/XPS/ECO3
32
48
CCT
3000K, 3500K, 4100k
3000K, 3500K, 4100k
3000K, 3500K, 4100K,
5000K, 6500K
Application Information
Applications
Application Notes
• Hospitals
• Industrial
• Office
• Retail
• Schools
1. Minimum lamp starting temperature determined by ballast.
2. Operation below 50°F may affect lumen output or lamp operation.
3. For cold temperature applications, use in enclosed fixtures or use tube guards to maximize lamp performance.
4. Good ballast to socket to lamp contact essential for correct operation of system.
5. Actual lamp life dependent on ballast type, switching cycle and hours of operation per start.
6. These lamps may help facilitate compliance with national energy codes such as ASHRAE/IES 90.1 or IECC and
state energy codes such as California Title 24. For more information contact your local building inspection office.
FL038R12 6/10
Page 60 of 103
Ordering Information
Specification Data
Average Rated Life
Nominal
Instant Start Programmed Rapid Start
Item
Ordering Length Initial Mean Lumens 3 hrs/ 12 hrs/ 3 hrs/ 12 hrs/
start
start
start
CCT CRI
Number Abbreviation Watts (in) Lumens Lumens1 per Watt start
22150 FO17/830/XPS/ECO3 17 24
1400
1316
82 24,000 40,000 40,000 42,000 3000K 85
22151 FO17/835/XPS/ECO3 17 24
1400
1316
82
24,000 40,000 40,000 42,000 3500K 85
22152 FO17/841/XPS/ECO3 17 24
1400
1316
82
24,000 40,000 40,000 42,000 4100K 85
22153 FO25/830/XPS/ECO3 25 36
2200
2068
88
24,000 40,000 40,000 42,000 3000K 85
22154 FO25/835/XPS/ECO3 25 36
2200
2068
88 24,000 40,000 40,000 42,000 3500K 85
22155 FO25/841/XPS/ECO3 25 36
2200
2068
88
24,000 40,000 40,000 42,000 4100K 85
21680 FO32/830/XPS/ECO3 32 48
3100
2914
97
24,000 40,000 40,000 42,000 3000K 85
21697 FO32/835/XPS/ECO3 32 48
3100
2914
97
24,000 40,000 40,000 42,000 3500K 85
21681 FO32/841/XPS/ECO3 32 48
3100
2914
97 24,000 40,000 40,000 42,000 4100K 85
21660 FO32/850/XPS/ECO3 32 48
3100
2914
97 24,000 40,000 40,000 42,000 5000K 81
21659 FO32/865/XPS/ECO3 32 48
3000
2820
94 24,000 40,000 40,000 42,000 6500K 81
Fixture Description
Type
Project/Job
SYLVANIA lamp
SYLVANIA ballast
Notes
1. Measured at 40% of rated life.
Ordering Guide
FO
Sample Specification
32
/
8
Fluorescent
Wattage:
8 = 81-85 CRI
OCTRON®
17, 25, or 32 watts
35
XPS
/
30 = 3000K
35 = 3500K
41 = 4100K
50 = 5000K
65 = 6500K
EXtended
Performance
Super
ECO3
ECOLOGIC3
Lamp Dimensions
Item
Number
FO17
FO25
FO32
(A) Max.
Overall
Length (in.)
23.78
35.78
47.78
(B) Base Face
to Opposite
Pin (in.)
Min. Max.
23.41 23.50
35.40 35.50
47.41 47.50
(C) Max. Base
Face to Base
Face (in.)
23.22
35.22
47.22
(D) Max.
Outside
Diameter (in.)
1.1
1.1
1.1
A
B
C
Lamp(s) shall be (a) OCTRON® EXtended Performance Super XPS®/ECO3 2-foot, 3-foot, or 4-foot
lamp(s) having medium bi-pin bases. Lamps shall
pass the existing Federal TCLP limits. Lamp(s)
shall have initial lumens of (1400, 2200, 3100,
3000), an average rated life of (24,000, 40,000)
hours on (instant start, programmed rapid start)
ballasts, a CRI of (85, 81), 94% lumen maintenance and a correlated color temperature of
(3000K, 3500K, 4100K, 5000K or 6500K). Lamps
shall be operated on QUICKTRONIC ballasts with
complete system warranty from the manufacturer
covering lamps and ballasts.
D
Technical Information
Lumen Maintenance
OCTRON XP, OCTRON XPS, OCTRON & F40/CW
United States
OSRAM SYLVANIA
100 Endicott Street
Danvers, MA 01923
Trade
Phone:
Fax:
1-800-255-5042
1-800-255-5043
National Accounts
1-800-562-4671
Phone:
1-800-562-4674
Fax:
OEM/Special Markets
Phone:
1-800-762-7191
Fax:
1-800-762-7192
Display/Optic
Phone:
1-888-677-2627
Fax:
1-800-762-7192
Related Literature
For optimum system performance and warranty pair with these QUICKTRONIC® Systems:
High Efficiency NEMA Premium QUICKTRONIC® T8 Brochure (Literature Code: ECS112)
Ballast Technology Applications & Specification Guide (Literature Code: ECS-ELECTRONIC2009)
QUICK 60+® System Warranty (Literature Code: ECS140)
FL038R12
SYLVANIA, ECOLOGIC, ECO, OCTRON, XPS, XP and QUICK 60+ are registered trademarks of OSRAM SYLVANIA Inc.
QUICKTRONIC is a registered trademark of OSRAM GmbH.
SEE THE WORLD IN A NEW LIGHT is a registered trademark of OSRAM SYLVANIA Inc.
Canada
OSRAM SYLVANIA LTD.
2001 Drew Road
Mississauga, ON L5S 1S4
Trade
Phone:
Fax:
1-800-263-2852
1-800-667-6772
OEM/Special Markets/Display/Optic
Phone:
1-800-265-2852
Fax:
1-800-667-6772
www.sylvania.com
Page 61 of 103
© 2010 OSRAM SYLVANIA 6/10 Photography Lutron® energy-saving light
controls for your home or office
Maestro ® occupancy sensing switch
Lutron Sensor Solutions
®
www.lutron.com
simple. affordable. energy-saving.
World Headquarters 1.610.282.3800
Technical Support 1.800.523.9466 (Available 24/7)
Customer Service 1.888.LUTRON1 (1.888.588.7661)
I
© 01/2011 Lutron Electronics Co., Inc. P/N 367-1768 REV B
Page 62 of 103
Lutron sensor solutions
®
simple. affordable. energy-saving.
Turn lights off in unoccupied spaces . . .
Save energy and money!
Lutron offers occupancy/vacancy and daylight sensors to save energy.
Occupancy sensors: Turn lights on
Daylight sensors: Take advantage of
automatically as an occupant enters the
available daylight by lowering or turning
room and turns lights off when the room
off electric lights when sufficient daylight
is unoccupied.
is available.
Auto On
Auto Off
Page 63 of
Full103
On
Dim
In-wall occupancy/vacancy sensors
Maestro®
•
•
•
•
2
Features:
Four versions available
— 2 Amp, single-pole 120 V switch
— 5 Amp, 3-way/multi-location 120 V switch
— dual-voltage commercial-grade
120 V/277 V switch
— 600 W, single-pole/multi-location
120 V dimmer
Reliable XCT detection technology ensures
lights stay on in occupied rooms
Switches work with all load types
Easy installation—no neutral wire,
shallow backbox
Page 64 of 103
●
●
●
●
●
●
●
•
•
•
•
•
Specifications:
180˚ sensor field-of-view
Up to 900 ft2 major motion and
400 ft2 minor motion coverage
1, 3, 5, 15, or 30 minute timeout options
120 V switches and dimmer;
120 V/277 V switch available
See coverage diagram on page 8
Private Office
2 Amp and 5 Amp sensors
also include learnable ambient
light detection.
•
Colors and finishes:
In-wall sensors* and Claro® wallplates
available in gloss colors and Satin Colors®
* BL, GR, BR, and Satin Colors will be available 3/1 for 2 Amp and 5 Amp sensors
Turns lights on only when needed
• Learns user behavior for when
lights should stay on or turn off
•
Ample light
Needs light
Page 65 of 103
Wireless occupancy/vacancy sensors
Radio Powr SavrTM
•
•
•
wall-mount sensors:
180° wall-mount sensor for spaces
with ceiling obstructions or higher than
12-foot ceilings
90° corner-mount sensor
Hallway sensor for spaces requiring
longer coverage
•
ceiling-mount sensor:
360° sensing for spaces with
8 to 12-foot ceilings
Works with:
GRAFIK Eye® QS wireless
4
Maestro
Wireless®
PowPakTM
Page 66 of 103
•
•
•
•
•
Features:
No wiring required—eliminates power pack
and wiring expenses
Wall controls remain fully operable during
automatic shut-off by sensor
Operates in occupancy or vacancy mode
Vacancy only available to meet California Title
24 Section 119 (j) requirements and NYC
Energy Code Local Law 48
Test mode assists in verifying the ideal
sensor location
Bathroom
•
•
•
•
•
Specifications:
Use up to three sensors per compatible control
for maximum coverage; one sensor can control
up to 10 compatible dimmers/switches for
spaces with additional zones of light
Timeout options include 1, 5, 15, and 30 minutes
Battery included (10 year battery life)
See coverage diagrams on page 8
Colors and finishes:
Ceiling-mount and wall-mount sensors
available in white (WH)
Radio Powr Savr occ/vac sensors
used with PowPak ceiling-mount
modules are easy to retrofit, and
save energy in spaces like bathrooms.
•
•
Easy installation saves labor,
time, and money
Wireless products upgrade
existing spaces with little
disruption during installation
Page 67 of 103
Wireless daylight sensor
Radio Powr SavrTM
•
•
•
Features:
Decreases or turns off electric light when
sufficient daylight is available
Increases electric light when insufficient
daylight is available
No wiring required
Maximize energy savings:
Combine occupancy/vacancy sensing with
daylighting to maximize energy savings.
Together, they can save 30% of lighting energy
in a building. Use dimming where appropriate
to save an additional 20%.
Works with:
GRAFIK Eye® QS wireless
6
Maestro
Wireless®
PowPakTM
Page 68 of 103
l
l
l
l
l
l
l
l
l
l
l
l
l
l
•
•
•
•
Specifications:
Use one daylight sensor per compatible control
One sensor can control up to 10 compatible
dimmers/switches for spaces with additional
zones of light
Battery included (10-year battery life)
Colors and finishes:
Daylight sensors available in white (WH)
Conference room
Combine
PowrSavr
Savr
Combine the
the Radio
Radio Powr
occupancy
sensors
and
daylight
sensor
and occupancy
daylight to
sensor
to maximize
sensors
maximize
energy savings
energy savings in spaces like
in spaces like classrooms.
conference rooms.
•
•
Save more energy by reducing the
usage of electric lights when
daylight is available
Wireless products reconfigure easily
based on space layout changes
Page 69 of 103
Lutron Sensor Coverage
®
In-wall, 180°
Ceiling-mount, 360°
400 ft2 —minor motion
900 ft2—major motion
Coverage varies by ceiling height
35 ft
(10.7 m)
0 ft
(0 m)
25 ft
(7.7 m)
15 ft
(4.6 m)
0 ft
(0 m)
15 ft
(4.6 m)
25 ft
(7.7 m)
9 ft
(2.7 m)
5 ft
(1.5 m)
0 ft
(0 m)
5 ft
(1.5 m)
9 ft
(2.7 m)
Hallway, long narrow field of view
Coverage varies by hallways with and length
10 ft
(3.0 m)
5 ft
(1.5 m)
0 ft
(0 m)
5 ft
(1.5 m)
10 ft
(3.0 m)
0 ft
(0 m)
150 ft
(45.7 m)
Key:
minor motion
major motion
8
Page 70 of 103
Wall-mount, 180°
Corner-mount, 90°
1,500 ft2—minor motion
3,000 ft2—major motion
1,223 ft2—minor motion
2,500 ft2—major motion
25 ft
(7.6 m)
50 ft
(15.2 m)
15 ft
(4.6 m)
35 ft
(10.7 m)
0 ft
(0 m)
15 ft
(4.6 m)
25 ft
(7.6 m)
0 ft
(0 m)
50 ft
(15.2 m)
0 ft
(0 m)
60 ft
(18.3 m)
XCTTM Technology:
•
•
This exclusive, reliable sensing
technology enhances sensors’
ability to detect fine motions
Lights stay on when a room is
occupied and stay off when a room
is unoccupied
0 ft
(0 m)
35 ft
(10.7 m)
50 ft
(15.2 m)
Clear ConnectTM RF Technology:
•
•
All Lutron wireless sensors operate on
a quiet frequency band
Ensures flawless communication
free of interference, so lights work
every time
Page 71 of 103
Model Numbers
Maestro® occupancy sensors
Radio Powr Savr sensors
Model number
Control type
Model number
MS-OPS2-XX1
single-pole switch with
occupancy/vacancy sensor,
120 V, 2 A light, inc/halogen,
MLV, ELV, CFL, LED, magnetic/
electronic ballasts
LRF2-OCRB2-P-WH 360º ceiling-mounted occupancy/
vacancy sensor, auto-on/auto-off
or manual on/auto-off settings
MS-OPS5M-XX1
TM
single-pole/3-way/multi-location
switch with occupancy/vacancy
sensor, 120 V, 5 A light, inc/
halogen, MLV, ELV, CFL, LED,
magnetic/electronic ballasts, 3 A fan
MS-OPS6M-DV-XX1 single-pole/multi-location switch
with occupancy/vacancy sensor,
120 V/277 V, 6 A light,
inc/halogen, MLV, ELV, non-dim
fluorescent ballasts, 3 Amp fan
MS-OP600M-XX1
single-pole/multi-location dimmer
with occupancy/vacancy sensor,
120 V, 600 W incandescent/halogen
Colors and finishes:
In-wall sensors* available in gloss colors
and Satin Colors®
* BL, GR, BR, and Satin Colors will be available 3/1 for 2 Amp and 5 Amp sensors
10
LRF2-OWLB-P-WH
180º wall-mounted occupancy/
vacancy sensor, auto-on/auto-off
or manual on/auto-off settings
LRF2-OKLB-P-WH
90º corner-mounted occupancy/
vacancy sensor, auto-on/auto-off
or manual on/auto-off settings
LRF2-OHLB-P-WH
wall-mounted hallway occupancy/
vacancy sensor, auto-on/auto-off
or manual on/auto-off settings
LRF2-DCRB-WH
ceiling-mounted daylight sensor
PowPak modules
TM
Spec grade product
XX Color suffix
1 Vacancy only models also available. Replace the “O” in the model
number with a “V” to order.
•
Control type
•
Model number
Control type
RMJ-ECO32-DV-B
dimming module with EcoSystem,
120 V/277 V
RMJ-16R-DV-B
switching module with SoftSwitch,
16 A general purpose switch,
120 V/277 V
Colors and finishes:
Ceiling-mount, wall-mount, corner-mount,
and hallway occupancy/vacancy sensors
available in white (WH)
• Daylight sensor available in white (WH)
Page 72 of 103
The colors of Lutron
Maestro Wireless load controllers
®
Model number
Control type
MRF2-600M-XX
single-pole/multi-location dimmer
120 V, 600 W inc/halogen
MRF2-10D-120-XX
single-pole/multi-location dimmer
120 V, 1000 W inc/halogen,
magnetic low voltage
MRF2-6ND-120-XX single-pole/multi-location
neutral wire dimmer
120 V, 600 W inc/halogen,
magnetic low voltage
•
•
•
MRF2-8S-DV-XX
single-pole/multi-location
non-neutral switch
120 V/277 V, 8 A light, inc/halogen,
MLV, ELV, non-dim fluorescent
ballasts, does not require a neutral
wire connection
MRF2-3LD-XX
plug-in lamp dimmer
300 W, inc/halogen
for table or floor lamps
MRF2-3PD-3-XX
plug-in module
300 W dimming/switching
Colors and finishes:
Dimmers and switches available in gloss
colors and Satin Colors®
Plug-in lamp dimmer available in gloss
white (WH), black (BL)
Plug-in module available in gloss
white (WH), black (BL), and brown (BR)
Gloss colors:
white (WH)
ivory (IV)
almond (AL)
light almond (LA)
gray (GR)
brown (BR)
black (BL)
Satin Colors®:
hot (HT)
merlot (MR)
plum (PL)
turquoise (TQ)
sea glass (SG)
midnight (MN)
sienna (SI)
terracotta (TC)
greenbriar (GB)
bluestone (BG)
taupe (TP)
eggshell (ES)
biscuit (BI)
snow (SW)
palladium (PD)
mocha stone (MS)
goldstone (GS)
desert stone (DS)
stone (ST)
limestone (LS)
Page 73 of 103
Catalog
Number
IBL 18L WD LP740 DLC
Notes
FEATURES & SPECIFICATIONS
Type
INTENDED USE — Ideal one-for-one replacement of conventional high bay systems such as HID and
fluorescent. Applications include warehousing, manufacturing and other large indoor spaces with
mounting heights up to 60'. Certain airborne contaminants can diminish integrity of acrylic.
Click here for Acrylic Environmental Compatibility table for suitable uses.
HB1
LED High Bay
CONSTRUCTION — Die-formed aluminum alloy chassis with integrated fins for superior cooling
through natural convection. The channel is made of heavy-duty code gauge (20-gauge) steel which is
powder coated after fabrication. The assembly is rigidly designed to resist twisting and bowing. Access
plate on the back of the channel housing allows quick and easy wiring.
IBL
Unlensed (standard)
9-24L pictured
OPTICS — Narrow and wide distributions available to meet both horizontal and vertical light level requirements. Reflectors feature precision-formed optics utilizing reflective Alanod® MIRO-5® aluminum.
Semi-diffuse lens optional to provide glare control and LED protection.
Patent Pending
ELECTRICAL — 89% lumen maintenance at 60,000 hours; predicted life of more than 100,000 hours.
Thermally protected driver standard with 0-10V dimming.
LISTINGS — CSA Certified to U.S. and Canadian safety standards. Damp location listed. Suitable for
ambient temperatures from -40°F (-40°C) to 131°F (55°C). Patent pending.
WARRANTY — 5-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Actual performance may differ as a result of end-user environment and application.
Lensed (optional)
36-48L pictured
Actual wattage may differ by +/-1% when operating between 120-277V +/-10%.
Note: Specifications subject to change without notice.
ORDERING INFORMATION
Example: IBL 18L WD LP740 DLC
Lead times will vary depending on options selected. Consult with your sales representative.
IBL
Series
Lumens
IBL
9L
12L
18L
Distribution
9,000 lumens
12,000 lumens
18,000 lumens
24L
36L
48L
24,000 lumens
36,000 lumens1
48,000 lumens1
WD
ND
Wide
Narrow
Lens
(blank)
SD125
Voltage
No shielding
Semi-diffuse acrylic
(blank)
HVOLT
120
277
Color temperature 2
MVOLT; 120-277V
347V-480V
120V
277V
Options
GLR
OUTCTR
OCS
IMP
I2412
SPD
WGX
LP740 DLC
LP750 DLC
LP740
LP750
70 CRI, 4000K CCT
70 CRI, 5000K CCT
70 CRI, 4000K CCT
70 CRI, 5000K CCT
Finish
Internal fast-blow fuse
Wiring leads pulled through back
center of fixture
RELOC® OnePass® 5' installed3
Integrated modular plug5,6
IOTA emergency LED battery pack for
32°F to104°F (0°C to 40°C) ambient7,8
Surge protector3
Standard wire guard, installed
3,4
Cord sets:
CS1W
CS3W
CS7W
CS11W
CS25W
CS97W
CS93W
9
Straight plug, 120V10
Twist-lock, 120V10
Straight plug, 277V10
Twist-lock, 277V10
Twist-lock, 347V10
Twist-lock, 480V10
600 SO white cord, no plug
(no voltage required)
Motion sensors :
MSE360
360° motion sensor embedded, high bay11,12
MSE360LB 360° motion sensor embedded, low bay11,12
MSIPED
Aisle motion sensor, photo sensor, pre-wired3
MSI360PED 360° motion sensor, photo sensor, pre-wired3
MSI
Aisle motion sensor, pre-wired3
MSI360
360° motion sensor, pre-wired3
MSID
Aisle motion sensor, pre-wired, HI/LO dimming control3
MSI360D
360° motion sensor, pre-wired, HI/LO dimming control3
NMSI
nLight, aisle motion sensor, pre-wired3
NMSI360
nLight enabled, 360° motion sensor, pre-wired3
nEPP5D
nLight dimming module3,13
(blank)
DWH
Gloss white with
textured dark gray
accents
Gloss white
Accessories: Order as separate catalog number.
Mounting:
IBAC120 M20
IBAC240 M20
IBHMP
ZACVH
IBLPMP
IBLPMPHB
IBLPMP48
IBLPMPHB48
HC36
THUN
Aircraft cable 10' with hook (one pair)
Aircraft cable 20' with hook (one pair)
Hook monopoint
Aircraft 10' V hanger (one pair)8
Pendant monopoint splice box, includes side covers for use with 9L-24L
Pendant monopoint splice box, includes side covers (3/4" hub)for use with 9L-24L.
Pendant monopoint splice box, includes side covers for use with 36L and 48L
Pendant monopoint splice box, includes side covers (3/4" hub) for use with 36L and 48L
Hanger chain, 36"8
Tong hanger bracket (one pair)8,14
Cord sets and sensors for IMP option:
CS1WIMP
Straight plug, 120V9,10,15
CS3WIMP
Twist-lock, 120V9,10,15
CS7WIMP
Straight plug, 277V9,10,15
CS11WIMP Twist-lock, 277V9,10,15
CS25WIMP Twist-lock 347V9,10,15
CS93WIMP 600V SO white cord, no plug
(no voltage required)9, 15
CS97WIMP Twist-lock 480V9,10,15
MSIIMP
Aisle sensor6,15
MSI360IMP 360° sensor6,15
Field-installable door and lens assemblies:
DLIBL SD125 Semi-diffuse acrylic lens for use
9L - 24L
DLIBL48 SD125 Semi-diffuse acrylic lens for use
with 36L and 48L
Wire guards:
WGIBL
Wire guard for use with 9L - 24L
WGIBL48
Wire guard for use with 36L
and 48L
See footnotes on page 2.
Page 74 of 103
INDUSTRIALIBL
Page 1 of 5
IBL LED High Bay
Notes
1 Fixtures more than 24" wide can interfere with the operation of some fire sprinkler systems. Verify specific
installation requirements with local fire official and insurance carrier. Emergency battery packs are not available with 36L or 48L.
2 Select product configurations are Design Lights Consortium (DLC) qualified; does not apply to 9L packages or 12
ND SD125 LP740 configuration.
3 Specify voltage.
4 Not available with 347 voltage.
5 Must be factory-installed.
6 Must have "IMP" power cord to power fixture.
7 Must specify voltage. 120V or 277V only. Not available with cordset w/plug or OUTCTR option.
8 Not available with 36L or 48L lumen package. When using THUN option maximum ambient temperature is 35°C.
9 All cord sets are 18/3, 6', white.
10 Cord sets are voltage specific. Specify voltage. Other configurations available. Consult factory.
11 Specify voltage;120, 277 or 347 only.
12 Not available with battery pack.
13 Consult factory for dimming of 208, 347 or 480V fixtures.
14 95°F (35°C) maximum ambient temperature when using the THUN.
15 Must have IMP option on fixture.
9L, 18L, and 36L lumen packages
12L, 24L, and 48L lumen packages
To create the 9L, 18L, and 36L lumen packages, the PCBA (LED board) is depopulated from the endcaps
inward. The first LED is 5-1/2" from the end cap on those units, compared to 1-1/8" on the 12L, 24L, and
48L product.
DIMENSIONS
Dimensions may vary with options or accessories.
24L & 18L HAS
4 ROWS OF LEDs
12L & 9L HAS
2 ROWS OF LEDs
36L AND 48L (NOT SHOWN)
HAVE 8 ROWS OF LEDS
9L and 12L utilize one driver
18L, and 24L utilize two drivers wired inboard/outboard
36L and 48L (not shown) utilize four drivers wired inboard/outboard
22-9/16
(57.3)
2-9/16
(6.5)
2-7/8
(7.3)
1-1/2
(3.8)
15-7/8
(40.3)
2-15/16
(7.6)
3-1/16
(7.6)
15-7/8
9L-24L
(40.3)
2-15/16
(7.6)
45-1/8
(114.6)
9L-24L
3-1/8
(7.9)
3-3/16
(8.1)
45-1/8
(114.6)
Shown with optional pendant monopoint.
31-5/16
(79.5)
1-1/16
(2.7)
2-15/16
(7.4)
2-1/8
(5.4)
36L-48L
36L-48L
Page 75 of 103
INDUSTRIALIBL
Page 2 of 5
IBL LED High Bay
OPERATIONAL DATA
.
Distribution
Delivered Lumens
5000K CCT @ 77°F (25°C )
Ambient Temperature
Delivered Lumens
4000K CCT @ 77°F (25°C)
Ambient Temperature
Lumen
Multiplier @ 104°F (40°C)
Ambient Temperature
Lumen
Multiplier @ 104°F (40°C)
Ambient w/SD125 Lens Kit
-40°F to 104°F
(-40°C to 40°C)
WD
10,039
9,794
0.98
0.901
ND
8,888
8,671
0.98
0.950
-40°F to 104°F
(-40°C to 40°C)
WD
13,055
11,702
0.98
0.901
ND
11,558
10,360
0.98
0.950
-40°F to 104°F
(-40°C to 40°C)
WD
19,893
19,406
0.98
0.901
ND
17,612
17,181
0.98
0.950
-40°F to 104°F
(-40°C to 40°C)
WD
24,052
23,463
0.98
0.901
ND
21,294
20,772
0.98
0.950
-40°F to 104°F
(-40°C to 40°C)
WD
36,805
36,480
0.98
0.901
ND
35,599
35,284
0.98
0.950
-40°F to 104°F
(-40°C to 40°C)
WD
46,856
46,443
0.98
0.901
ND
45,320
44,920
0.98
0.950
Lumen
Package
Ambient Rating
(120V - 277V)
Ambient Rating
(347V / 480V)
9L
-40°F to 131°F
(-40°C to 55°C)
12L
18L
24L
36L
48L
-40°F to 131°F
(-40°C to 55°C)
-40°F to 131°F
(-40°C to 55°C)
-40°F to 131°F
(-40°C to 55°C)
-40°F to 131°F
(-40°C to 55°C)
-40°F to 131°F
(-40°C to 55°C)
CHARACTERISTICS
Lumen
Package
Wattage
120V
277V
Length
347V
Width
Depth
Weight
without Lens
Dimensions are shown in inches (centimeters)
unless otherwise noted.
480V
(Lens kit adds
approx. 7 lbs.)
Comparable Light Source
9L
103
98
107
106
45 (114.3)
15-3/4 (40.0)
3-1/4 (8.3)
12.5 lbs. (5.7 kg)
2-lamp T5HO
12L
134
131
142
141
45 (114.3)
15-3/4 (40.0)
3-1/4 (8.3)
12.5 lbs. (5.7 kg)
4-lamp T8, 250W HID
18L
213
199
213
211
45 (114.3)
15-3/4 (40.0)
3-1/4 (8.3)
17.5 lbs. (7.9 kg)
4-lamp T5HO, 6-lamp T8, 400W HID
24L
262
258
284
281
45 (114.3)
15-3/4 (40.0)
3-1/4 (8.3)
17.5 lbs. (7.9 kg)
6-lamp T5HO, 8-lamp T8
36L
423
417
459
454
45 (114.3)
31-1/3 (79.5)
3-1/4 (8.3)
35 lbs. (15.9 kg)
8-lamp T5HO, 750 HID
48L
531
511
562
557
45 (114.3)
31-1/3 (79.5)
3-1/4 (8.3)
35 lbs. (15.9 kg)
10-lamp T5HO,1000W HID
PROJECTED LUMEN MAINTENANCE
Operating Hours
0
10,000
20,000
25,000
35,000
50,000
60,000
75,000
100,000
Lumen Maintenance Factor
1
0.96
0.95
0.94
0.93
0.91
0.89
0.87
0.84
LUMENS VS. AMBIENT TEMPERATURE
Ambient °C
Ambient °F
Lumen Multiplier
0
32
1.02
5
41
1.015
10
50
1.01
15
59
1.008
20
68
1.005
25
77
1
30
86
0.995
35
95
0.985
40
104
0.98
45
113
0.97
50
122
0.965
55
131
0.96
PHOTOMETRICS
See www.lithonia.com.
Page 76 of 103
INDUSTRIALIBL
Page 3 of 5
IBL LED High Bay
SENSORS AND CONTROLS
Sensors are an excellent way to maximize the return on your high bay lighting investment. I-BEAM LED fixtures can be equipped with an occupancy sensor, photocell, nLight® or nWiFi™. These
devices are factory-installed and require minimal labor to set up during fixture installation.
Embedded 360° Lens
Aisleway Lens
360° Lens
HIGH VIEW
MSE360
MSI
MSI360
SIDE VIEW
HIGH VIEW
0 ft 0 m
10 3
20 6
30 9.1
40 12.2
15.2
50
LOW VIEW
7.6
25
0m
0 ft
7.6
25
15.2
50
LOW VIEW
TOP VIEW
7
2.1
0 ft 0 m
7
2.1
15.2
50
7.6
25
0m
0 ft
7.6
25
15.2
50
MSI360: The Sensor Switch CMRB 6 open-area sensor
has 360° coverage and can be integrated with a
photocell (PE) for further energy savings.
MSI: The Sensor Switch CMRB 50 aisleway sensor offers
a dedicated sensor and extended range, compared to
competitive products.
MSE360: The Sensor Switch SFR 5 open-area sensor
is embedded in the fixture, making it less intrusive
than traditional sensors.
Mounting Location: End Plate
Mounting Location: End Plate
Mounting Location: Center Channel
• Best choice for 15 to 45 ft (4.57 to 13.72 m) mounting
heights
• 15 to 20 ft (4.57 to 6.10 m) radial coverage overlaps area
lit by a typical high bay fixture
• Provides 50° bi-directional and 10° wide coverage
pattern
• 1.2x mounting height equals approximate detection
range in either direction
• Sensor lens turret rotates 90° in order to easily adjust the
direction of the view pattern
• Recommended for fixtures that have a 1.0 spacingto-mounting height ratio or less
• Use provided masking kit to mask off a portion of
the view pattern for end-of-aisle applications or, to
trim sensor’s side viewing to create a rectangular
pattern for center-of-aisle viewing only.
All I-BEAM LED fixtures can be equipped with nLight. nLight is an exclusive and revolutionary system that cost-effectively
combines time-based and sensor-based lighting controls. The digital interface allows for quick, easy modifications to time
delays, photocell sensitivity and light levels at the individual fixture level.
nWiFi for nLight adds conventional WiFi technology to nLight devices, such as occupancy sensors and relays, enabling them
to seamlessly communicate with both wired and wireless nLight lighting control zones. This powerful new nLight technology
further simplifies installation and reduces hardware costs.
Page 77 of 103
INDUSTRIALIBL
Page 4 of 5
IBL LED High Bay
OPTIONS AND ACCESSORIES
The I-BEAM LED fixture offers numerous options for almost every electrical and optical component, including a long list of field-installable accessories.
REFLECTORS
Wide distribution is formed with
93% reflective white paint. Narrow
distribution is formed with Alanod®
MIRO®.
INTEGRATED ELECTRICAL OPTIONS
Channel sized to accept emergency components,
surge protector, fusing and embedded sensors.
WIRE GUARD (external)
Field- or factory-installed. Protects light
engine from impact. Mounting hardware
included.
DIFFUSER
Field- or factory-installed. Available in semidiffuse acrylic. Mounting hardware included.
Factory-installed option:
WGX
Field-installed options:
WGIBL
WGIBL48
Factory-installed option:
SD125
Field-installed option:
DLIBL SD125
DLIBL48 SD125
EMBEDDED OCCUPANCY SENSOR
Can be placed in the channel cover
which reduces the risk of sensor
damage compared to non-embedded
sensors.
PENDANT MONOPOINT BRACKET
Accepts ¾” rigid conduit for single-point
mounting. The bracket can be adjusted to help
counterbalance fixture to offset weight variance
from end to end.
Factory-installed option:
MSE360
Order as:
IBLPMP
IBLPMPHB
IBLPMP48
IBLPMPHB48
SURFACE MOUNT BRACKET
Rigidly attach I-BEAM LED to a hard
ceiling. Can be placed anywhere along
fixture.
HANGERS
Several lengths of aircraft cables and chains
available; with or without V-hooks.
Order as:
THUN (not for use in ambient
temperatures exceeding 95°F (35°C), or
on the 36L or 48L)
CORD SETS
Available in several lengths with
or without molded plug. White is
standard.
For available options, see ordering
information on page 1.
Order as:
IBAC120 M20
IBHMP
For others, see accessories on page 1.
INTEGRATED MODULAR PLUG (IMP)
Must be factory-installed and allows for field
installation of various modular accessories
including cordsets, motion sensors, photocells
and LC&D X-point™ relays.
IBL
INDUSTRIAL:
One Lithonia Way, Conyers, GA 30012 Phone: 800-315-4963 Fax: 770-981-8191 www.lithonia.com
Page
© 2012-2013 Acuity Brands
Lighting, 78
Inc. Allof
rights103
reserved. Rev. 06/13/13
Page 5 of 5
Catalog
Number
IBL 18L WD LP740 DLC
Notes
FEATURES & SPECIFICATIONS
Type
INTENDED USE — Ideal one-for-one replacement of conventional high bay systems such as HID and
fluorescent. Applications include warehousing, manufacturing and other large indoor spaces with
mounting heights up to 60'. Certain airborne contaminants can diminish integrity of acrylic.
Click here for Acrylic Environmental Compatibility table for suitable uses.
HB1
LED High Bay
CONSTRUCTION — Die-formed aluminum alloy chassis with integrated fins for superior cooling
through natural convection. The channel is made of heavy-duty code gauge (20-gauge) steel which is
powder coated after fabrication. The assembly is rigidly designed to resist twisting and bowing. Access
plate on the back of the channel housing allows quick and easy wiring.
IBL
Unlensed (standard)
9-24L pictured
OPTICS — Narrow and wide distributions available to meet both horizontal and vertical light level requirements. Reflectors feature precision-formed optics utilizing reflective Alanod® MIRO-5® aluminum.
Semi-diffuse lens optional to provide glare control and LED protection.
Patent Pending
ELECTRICAL — 89% lumen maintenance at 60,000 hours; predicted life of more than 100,000 hours.
Thermally protected driver standard with 0-10V dimming.
LISTINGS — CSA Certified to U.S. and Canadian safety standards. Damp location listed. Suitable for
ambient temperatures from -40°F (-40°C) to 131°F (55°C). Patent pending.
WARRANTY — 5-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Actual performance may differ as a result of end-user environment and application.
Lensed (optional)
36-48L pictured
Actual wattage may differ by +/-1% when operating between 120-277V +/-10%.
Note: Specifications subject to change without notice.
ORDERING INFORMATION
Example: IBL 18L WD LP740 DLC
Lead times will vary depending on options selected. Consult with your sales representative.
IBL
Series
Lumens
IBL
9L
12L
18L
Distribution
9,000 lumens
12,000 lumens
18,000 lumens
24L
36L
48L
24,000 lumens
36,000 lumens1
48,000 lumens1
WD
ND
Wide
Narrow
Lens
(blank)
SD125
Voltage
No shielding
Semi-diffuse acrylic
(blank)
HVOLT
120
277
Color temperature 2
MVOLT; 120-277V
347V-480V
120V
277V
Options
GLR
OUTCTR
OCS
IMP
I2412
SPD
WGX
LP740 DLC
LP750 DLC
LP740
LP750
70 CRI, 4000K CCT
70 CRI, 5000K CCT
70 CRI, 4000K CCT
70 CRI, 5000K CCT
Finish
Internal fast-blow fuse
Wiring leads pulled through back
center of fixture
RELOC® OnePass® 5' installed3
Integrated modular plug5,6
IOTA emergency LED battery pack for
32°F to104°F (0°C to 40°C) ambient7,8
Surge protector3
Standard wire guard, installed
3,4
Cord sets:
CS1W
CS3W
CS7W
CS11W
CS25W
CS97W
CS93W
9
Straight plug, 120V10
Twist-lock, 120V10
Straight plug, 277V10
Twist-lock, 277V10
Twist-lock, 347V10
Twist-lock, 480V10
600 SO white cord, no plug
(no voltage required)
Motion sensors :
MSE360
360° motion sensor embedded, high bay11,12
MSE360LB 360° motion sensor embedded, low bay11,12
MSIPED
Aisle motion sensor, photo sensor, pre-wired3
MSI360PED 360° motion sensor, photo sensor, pre-wired3
MSI
Aisle motion sensor, pre-wired3
MSI360
360° motion sensor, pre-wired3
MSID
Aisle motion sensor, pre-wired, HI/LO dimming control3
MSI360D
360° motion sensor, pre-wired, HI/LO dimming control3
NMSI
nLight, aisle motion sensor, pre-wired3
NMSI360
nLight enabled, 360° motion sensor, pre-wired3
nEPP5D
nLight dimming module3,13
(blank)
DWH
Gloss white with
textured dark gray
accents
Gloss white
Accessories: Order as separate catalog number.
Mounting:
IBAC120 M20
IBAC240 M20
IBHMP
ZACVH
IBLPMP
IBLPMPHB
IBLPMP48
IBLPMPHB48
HC36
THUN
Aircraft cable 10' with hook (one pair)
Aircraft cable 20' with hook (one pair)
Hook monopoint
Aircraft 10' V hanger (one pair)8
Pendant monopoint splice box, includes side covers for use with 9L-24L
Pendant monopoint splice box, includes side covers (3/4" hub)for use with 9L-24L.
Pendant monopoint splice box, includes side covers for use with 36L and 48L
Pendant monopoint splice box, includes side covers (3/4" hub) for use with 36L and 48L
Hanger chain, 36"8
Tong hanger bracket (one pair)8,14
Cord sets and sensors for IMP option:
CS1WIMP
Straight plug, 120V9,10,15
CS3WIMP
Twist-lock, 120V9,10,15
CS7WIMP
Straight plug, 277V9,10,15
CS11WIMP Twist-lock, 277V9,10,15
CS25WIMP Twist-lock 347V9,10,15
CS93WIMP 600V SO white cord, no plug
(no voltage required)9, 15
CS97WIMP Twist-lock 480V9,10,15
MSIIMP
Aisle sensor6,15
MSI360IMP 360° sensor6,15
Field-installable door and lens assemblies:
DLIBL SD125 Semi-diffuse acrylic lens for use
9L - 24L
DLIBL48 SD125 Semi-diffuse acrylic lens for use
with 36L and 48L
Wire guards:
WGIBL
Wire guard for use with 9L - 24L
WGIBL48
Wire guard for use with 36L
and 48L
See footnotes on page 2.
Page 79 of 103
INDUSTRIALIBL
Page 1 of 5
IBL LED High Bay
Notes
1 Fixtures more than 24" wide can interfere with the operation of some fire sprinkler systems. Verify specific
installation requirements with local fire official and insurance carrier. Emergency battery packs are not available with 36L or 48L.
2 Select product configurations are Design Lights Consortium (DLC) qualified; does not apply to 9L packages or 12
ND SD125 LP740 configuration.
3 Specify voltage.
4 Not available with 347 voltage.
5 Must be factory-installed.
6 Must have "IMP" power cord to power fixture.
7 Must specify voltage. 120V or 277V only. Not available with cordset w/plug or OUTCTR option.
8 Not available with 36L or 48L lumen package. When using THUN option maximum ambient temperature is 35°C.
9 All cord sets are 18/3, 6', white.
10 Cord sets are voltage specific. Specify voltage. Other configurations available. Consult factory.
11 Specify voltage;120, 277 or 347 only.
12 Not available with battery pack.
13 Consult factory for dimming of 208, 347 or 480V fixtures.
14 95°F (35°C) maximum ambient temperature when using the THUN.
15 Must have IMP option on fixture.
9L, 18L, and 36L lumen packages
12L, 24L, and 48L lumen packages
To create the 9L, 18L, and 36L lumen packages, the PCBA (LED board) is depopulated from the endcaps
inward. The first LED is 5-1/2" from the end cap on those units, compared to 1-1/8" on the 12L, 24L, and
48L product.
DIMENSIONS
Dimensions may vary with options or accessories.
24L & 18L HAS
4 ROWS OF LEDs
12L & 9L HAS
2 ROWS OF LEDs
36L AND 48L (NOT SHOWN)
HAVE 8 ROWS OF LEDS
9L and 12L utilize one driver
18L, and 24L utilize two drivers wired inboard/outboard
36L and 48L (not shown) utilize four drivers wired inboard/outboard
22-9/16
(57.3)
2-9/16
(6.5)
2-7/8
(7.3)
1-1/2
(3.8)
15-7/8
(40.3)
2-15/16
(7.6)
3-1/16
(7.6)
15-7/8
9L-24L
(40.3)
2-15/16
(7.6)
45-1/8
(114.6)
9L-24L
3-1/8
(7.9)
3-3/16
(8.1)
45-1/8
(114.6)
Shown with optional pendant monopoint.
31-5/16
(79.5)
1-1/16
(2.7)
2-15/16
(7.4)
2-1/8
(5.4)
36L-48L
36L-48L
Page 80 of 103
INDUSTRIALIBL
Page 2 of 5
IBL LED High Bay
OPERATIONAL DATA
.
Distribution
Delivered Lumens
5000K CCT @ 77°F (25°C )
Ambient Temperature
Delivered Lumens
4000K CCT @ 77°F (25°C)
Ambient Temperature
Lumen
Multiplier @ 104°F (40°C)
Ambient Temperature
Lumen
Multiplier @ 104°F (40°C)
Ambient w/SD125 Lens Kit
-40°F to 104°F
(-40°C to 40°C)
WD
10,039
9,794
0.98
0.901
ND
8,888
8,671
0.98
0.950
-40°F to 104°F
(-40°C to 40°C)
WD
13,055
11,702
0.98
0.901
ND
11,558
10,360
0.98
0.950
-40°F to 104°F
(-40°C to 40°C)
WD
19,893
19,406
0.98
0.901
ND
17,612
17,181
0.98
0.950
-40°F to 104°F
(-40°C to 40°C)
WD
24,052
23,463
0.98
0.901
ND
21,294
20,772
0.98
0.950
-40°F to 104°F
(-40°C to 40°C)
WD
36,805
36,480
0.98
0.901
ND
35,599
35,284
0.98
0.950
-40°F to 104°F
(-40°C to 40°C)
WD
46,856
46,443
0.98
0.901
ND
45,320
44,920
0.98
0.950
Lumen
Package
Ambient Rating
(120V - 277V)
Ambient Rating
(347V / 480V)
9L
-40°F to 131°F
(-40°C to 55°C)
12L
18L
24L
36L
48L
-40°F to 131°F
(-40°C to 55°C)
-40°F to 131°F
(-40°C to 55°C)
-40°F to 131°F
(-40°C to 55°C)
-40°F to 131°F
(-40°C to 55°C)
-40°F to 131°F
(-40°C to 55°C)
CHARACTERISTICS
Lumen
Package
Wattage
120V
277V
Length
347V
Width
Depth
Weight
without Lens
Dimensions are shown in inches (centimeters)
unless otherwise noted.
480V
(Lens kit adds
approx. 7 lbs.)
Comparable Light Source
9L
103
98
107
106
45 (114.3)
15-3/4 (40.0)
3-1/4 (8.3)
12.5 lbs. (5.7 kg)
2-lamp T5HO
12L
134
131
142
141
45 (114.3)
15-3/4 (40.0)
3-1/4 (8.3)
12.5 lbs. (5.7 kg)
4-lamp T8, 250W HID
18L
213
199
213
211
45 (114.3)
15-3/4 (40.0)
3-1/4 (8.3)
17.5 lbs. (7.9 kg)
4-lamp T5HO, 6-lamp T8, 400W HID
24L
262
258
284
281
45 (114.3)
15-3/4 (40.0)
3-1/4 (8.3)
17.5 lbs. (7.9 kg)
6-lamp T5HO, 8-lamp T8
36L
423
417
459
454
45 (114.3)
31-1/3 (79.5)
3-1/4 (8.3)
35 lbs. (15.9 kg)
8-lamp T5HO, 750 HID
48L
531
511
562
557
45 (114.3)
31-1/3 (79.5)
3-1/4 (8.3)
35 lbs. (15.9 kg)
10-lamp T5HO,1000W HID
PROJECTED LUMEN MAINTENANCE
Operating Hours
0
10,000
20,000
25,000
35,000
50,000
60,000
75,000
100,000
Lumen Maintenance Factor
1
0.96
0.95
0.94
0.93
0.91
0.89
0.87
0.84
LUMENS VS. AMBIENT TEMPERATURE
Ambient °C
Ambient °F
Lumen Multiplier
0
32
1.02
5
41
1.015
10
50
1.01
15
59
1.008
20
68
1.005
25
77
1
30
86
0.995
35
95
0.985
40
104
0.98
45
113
0.97
50
122
0.965
55
131
0.96
PHOTOMETRICS
See www.lithonia.com.
Page 81 of 103
INDUSTRIALIBL
Page 3 of 5
IBL LED High Bay
SENSORS AND CONTROLS
Sensors are an excellent way to maximize the return on your high bay lighting investment. I-BEAM LED fixtures can be equipped with an occupancy sensor, photocell, nLight® or nWiFi™. These
devices are factory-installed and require minimal labor to set up during fixture installation.
Embedded 360° Lens
Aisleway Lens
360° Lens
HIGH VIEW
MSE360
MSI
MSI360
SIDE VIEW
HIGH VIEW
0 ft 0 m
10 3
20 6
30 9.1
40 12.2
15.2
50
LOW VIEW
7.6
25
0m
0 ft
7.6
25
15.2
50
LOW VIEW
TOP VIEW
7
2.1
0 ft 0 m
7
2.1
15.2
50
7.6
25
0m
0 ft
7.6
25
15.2
50
MSI360: The Sensor Switch CMRB 6 open-area sensor
has 360° coverage and can be integrated with a
photocell (PE) for further energy savings.
MSI: The Sensor Switch CMRB 50 aisleway sensor offers
a dedicated sensor and extended range, compared to
competitive products.
MSE360: The Sensor Switch SFR 5 open-area sensor
is embedded in the fixture, making it less intrusive
than traditional sensors.
Mounting Location: End Plate
Mounting Location: End Plate
Mounting Location: Center Channel
• Best choice for 15 to 45 ft (4.57 to 13.72 m) mounting
heights
• 15 to 20 ft (4.57 to 6.10 m) radial coverage overlaps area
lit by a typical high bay fixture
• Provides 50° bi-directional and 10° wide coverage
pattern
• 1.2x mounting height equals approximate detection
range in either direction
• Sensor lens turret rotates 90° in order to easily adjust the
direction of the view pattern
• Recommended for fixtures that have a 1.0 spacingto-mounting height ratio or less
• Use provided masking kit to mask off a portion of
the view pattern for end-of-aisle applications or, to
trim sensor’s side viewing to create a rectangular
pattern for center-of-aisle viewing only.
All I-BEAM LED fixtures can be equipped with nLight. nLight is an exclusive and revolutionary system that cost-effectively
combines time-based and sensor-based lighting controls. The digital interface allows for quick, easy modifications to time
delays, photocell sensitivity and light levels at the individual fixture level.
nWiFi for nLight adds conventional WiFi technology to nLight devices, such as occupancy sensors and relays, enabling them
to seamlessly communicate with both wired and wireless nLight lighting control zones. This powerful new nLight technology
further simplifies installation and reduces hardware costs.
Page 82 of 103
INDUSTRIALIBL
Page 4 of 5
IBL LED High Bay
OPTIONS AND ACCESSORIES
The I-BEAM LED fixture offers numerous options for almost every electrical and optical component, including a long list of field-installable accessories.
REFLECTORS
Wide distribution is formed with
93% reflective white paint. Narrow
distribution is formed with Alanod®
MIRO®.
INTEGRATED ELECTRICAL OPTIONS
Channel sized to accept emergency components,
surge protector, fusing and embedded sensors.
WIRE GUARD (external)
Field- or factory-installed. Protects light
engine from impact. Mounting hardware
included.
DIFFUSER
Field- or factory-installed. Available in semidiffuse acrylic. Mounting hardware included.
Factory-installed option:
WGX
Field-installed options:
WGIBL
WGIBL48
Factory-installed option:
SD125
Field-installed option:
DLIBL SD125
DLIBL48 SD125
EMBEDDED OCCUPANCY SENSOR
Can be placed in the channel cover
which reduces the risk of sensor
damage compared to non-embedded
sensors.
PENDANT MONOPOINT BRACKET
Accepts ¾” rigid conduit for single-point
mounting. The bracket can be adjusted to help
counterbalance fixture to offset weight variance
from end to end.
Factory-installed option:
MSE360
Order as:
IBLPMP
IBLPMPHB
IBLPMP48
IBLPMPHB48
SURFACE MOUNT BRACKET
Rigidly attach I-BEAM LED to a hard
ceiling. Can be placed anywhere along
fixture.
HANGERS
Several lengths of aircraft cables and chains
available; with or without V-hooks.
Order as:
THUN (not for use in ambient
temperatures exceeding 95°F (35°C), or
on the 36L or 48L)
CORD SETS
Available in several lengths with
or without molded plug. White is
standard.
For available options, see ordering
information on page 1.
Order as:
IBAC120 M20
IBHMP
For others, see accessories on page 1.
INTEGRATED MODULAR PLUG (IMP)
Must be factory-installed and allows for field
installation of various modular accessories
including cordsets, motion sensors, photocells
and LC&D X-point™ relays.
IBL
INDUSTRIAL:
One Lithonia Way, Conyers, GA 30012 Phone: 800-315-4963 Fax: 770-981-8191 www.lithonia.com
Page
© 2012-2013 Acuity Brands
Lighting, 83
Inc. Allof
rights103
reserved. Rev. 06/13/13
Page 5 of 5
Champ® Pro PFM Series
Luminaires
2L
UL/cUL Listed
NEMA 4X
IP66
Type FL5
PFM13L CY/UNV1 76
Perfect for outdoor/indoor flood illumination
Drivers:
The Champ® Pro PFM
Family
Model
Champ® Pro PFM Series Floodlights are
designed to provide full-spectrum, crisp,
white light. Five versions of the Champ
PFM LED are available, providing ideal
solutions for a wide range of applications.
90-305 VAC, 50 / 60
Hz; 108-250 VDC
347 VAC Model
480 VAC Model
Standard
Option 1
Option 2
Standard Materials:
Champ® Pro
PFM Model
Equivalent
MH HID
Lamp
PFM5L
PFM7L
PFM9L
PFM11L
PFM13L
100W-150W
150W-175W
175W-250W
250W-400W
400W
Energy
Savings
• Housing – copper-free aluminum with
Corro-free™ epoxy powder coat
• Lens – shatter-resistant glass
Up to
62%!
• Gaskets – silicone
• External hardware – stainless steel
• Factory-sealed, no external seals
required
Certifications and
Compliances:
•
•
•
•
•
5L - 13L
LED System:
UL1598
UL1598A
cUL
NEMA 4X; IP66
DesignLights Consortium® approved for
select models (refer to Ordering
Information for details)
• High brightness light emitting diode
(LED) arrays
• Color temperature: 3000K (CRI 82) and
5600K (CRI 65) options available
• Advanced heat sink design ensures LED
does not exceed manufacturer’s
temperature ratings across all specified
ambient conditions
Electrical Ratings:
PFM5L
PFM7L
PFM9L
PFM13L
100-277V 50-60 Hz
Voltage Range, VAC
2L
PFM11L
347 / 480V 60 Hz
Voltage Range, VDC
108-250
108-250
108-250
108-250
108-250
Input Power (Nom.)
64
89
121
149
179
Input Amps (Max.)
0.550
0.800
1.083
1.608
1.608
Power Factor
>0.85
>0.85
>0.85
>0.85
>0.85
Ordering Information:
Color Temperature
Cool Color Temperature
5L Series
7L Series
9L Series
11L Series
13L Series
PFM5LCY/UNV1 76 PFM7LCY/UNV1 76 PFM9LCY/UNV1 76 PFM11LCY/UNV1 76 PFM13LCY/UNV1 76
PFM5LCY/120 76*
PFM7LCY/120 76*
PFM9LCY/120 76*
PFM11LCY/120 76*
PFM13LCY/120 76*
Warm Color Temperature PFM5LWY/UNV1 76 PFM7LWY/UNV1 76 PFM9LWY/UNV1 76 PFM11LWY/UNV1 76 PFM13LWY/UNV1 76
For 347 VAC option, replace /UNV1 with /347. For 480 VAC option, replace /UNV1 with /480.
To order fixture without optics, remove ‘76’ from the end of the catalog number.
*5 year limited warranty. Refer to page 2 of the D-0413 authorized distributor price book for Cooper Crouse-Hinds standard Terms and Conditions.
DesignLights Consortium approved models. Cool white only.
Options:
Description
Suffix
Fused (only applies to UNV1 model, not available for 347V or 480V; NOT marine or cUL Listed) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S658
Two conduit/cable glands of like thread installed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S886
Accessories:
2
Description
Catalog No. Sold Separately
Bolt-on visor (sold separately)
Bolt-on wire guard (sold separately)
Floodlight slipfitter (sold separately)
Slipfitter wall mount adapter (sold separately)
DSV1
P61
SFA6
SWB6
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Cooper Crouse-Hinds
Page 84 of 103
Champ® Pro PFM Series
Luminaires
UL/cUL Listed
NEMA 4X
IP66
2L
Perfect for outdoor/indoor flood illumination
Dimensions:
[167.1]
6.6
[532.9]
21.0
[552.5]
21.75
[405.9]
16.0
[14]
Ø.55
[120.7]
4.75
Photometric Data:
Weights:
Model
Lbs.
5L
7L
9L
11L
13L
39.11
39.16
39.73
40.35
40.35
PFM13L @ 30 Ft. High; Tilt Angle = 45 Degrees
(Isofootcandles)
Ambient Temperature:
Champ® Pro PFM Model
Max. Temp. ºC
PFM5L
55
PFM7L
55
PFM9L
55
PFM13L
40
2L
PFM11L
55
40
55
Point By Point FC Readings
Distance in Feet
.35 Fc
.5 Fc
1 Fc
2 Fc
2.5 Fc
MULTIPLIERS FOR OTHER LED FLOODLIGHTS
Luminaire
Series
Wattage
Lumens*
PFM5L
64
4386
PFM7L
89
6720
PFM9L
121
8478
PFM11L
149
10420
*PFM 13L output is 12,940.
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Page 85 of3 103
Copyright© 2013 Cooper Crouse-Hinds
Champ® Pro PFM Series
Luminaires
2L
UL/cUL Listed
NEMA 4X
IP66
Type FL4
PFM9L CY/UNV1 76
Perfect for outdoor/indoor flood illumination
Drivers:
The Champ® Pro PFM
Family
Model
Champ® Pro PFM Series Floodlights are
designed to provide full-spectrum, crisp,
white light. Five versions of the Champ
PFM LED are available, providing ideal
solutions for a wide range of applications.
90-305 VAC, 50 / 60
Hz; 108-250 VDC
347 VAC Model
480 VAC Model
Standard
Option 1
Option 2
Standard Materials:
Champ® Pro
PFM Model
Equivalent
MH HID
Lamp
PFM5L
PFM7L
PFM9L
PFM11L
PFM13L
100W-150W
150W-175W
175W-250W
250W-400W
400W
Energy
Savings
• Housing – copper-free aluminum with
Corro-free™ epoxy powder coat
• Lens – shatter-resistant glass
Up to
62%!
• Gaskets – silicone
• External hardware – stainless steel
• Factory-sealed, no external seals
required
Certifications and
Compliances:
•
•
•
•
•
5L - 13L
LED System:
UL1598
UL1598A
cUL
NEMA 4X; IP66
DesignLights Consortium® approved for
select models (refer to Ordering
Information for details)
• High brightness light emitting diode
(LED) arrays
• Color temperature: 3000K (CRI 82) and
5600K (CRI 65) options available
• Advanced heat sink design ensures LED
does not exceed manufacturer’s
temperature ratings across all specified
ambient conditions
Electrical Ratings:
PFM5L
PFM7L
PFM9L
PFM13L
100-277V 50-60 Hz
Voltage Range, VAC
2L
PFM11L
347 / 480V 60 Hz
Voltage Range, VDC
108-250
108-250
108-250
108-250
108-250
Input Power (Nom.)
64
89
121
149
179
Input Amps (Max.)
0.550
0.800
1.083
1.608
1.608
Power Factor
>0.85
>0.85
>0.85
>0.85
>0.85
Ordering Information:
Color Temperature
Cool Color Temperature
5L Series
7L Series
9L Series
11L Series
13L Series
PFM5LCY/UNV1 76 PFM7LCY/UNV1 76 PFM9LCY/UNV1 76 PFM11LCY/UNV1 76 PFM13LCY/UNV1 76
PFM5LCY/120 76*
PFM7LCY/120 76*
PFM9LCY/120 76*
PFM11LCY/120 76*
PFM13LCY/120 76*
Warm Color Temperature PFM5LWY/UNV1 76 PFM7LWY/UNV1 76 PFM9LWY/UNV1 76 PFM11LWY/UNV1 76 PFM13LWY/UNV1 76
For 347 VAC option, replace /UNV1 with /347. For 480 VAC option, replace /UNV1 with /480.
To order fixture without optics, remove ‘76’ from the end of the catalog number.
*5 year limited warranty. Refer to page 2 of the D-0413 authorized distributor price book for Cooper Crouse-Hinds standard Terms and Conditions.
DesignLights Consortium approved models. Cool white only.
Options:
Description
Suffix
Fused (only applies to UNV1 model, not available for 347V or 480V; NOT marine or cUL Listed) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S658
Two conduit/cable glands of like thread installed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S886
Accessories:
2
Description
Catalog No. Sold Separately
Bolt-on visor (sold separately)
Bolt-on wire guard (sold separately)
Floodlight slipfitter (sold separately)
Slipfitter wall mount adapter (sold separately)
DSV1
P61
SFA6
SWB6
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Cooper Crouse-Hinds
Page 86 of 103
Champ® Pro PFM Series
Luminaires
UL/cUL Listed
NEMA 4X
IP66
2L
Perfect for outdoor/indoor flood illumination
Dimensions:
[167.1]
6.6
[532.9]
21.0
[552.5]
21.75
[405.9]
16.0
[14]
Ø.55
[120.7]
4.75
Photometric Data:
Weights:
Model
Lbs.
5L
7L
9L
11L
13L
39.11
39.16
39.73
40.35
40.35
PFM13L @ 30 Ft. High; Tilt Angle = 45 Degrees
(Isofootcandles)
Ambient Temperature:
Champ® Pro PFM Model
Max. Temp. ºC
PFM5L
55
PFM7L
55
PFM9L
55
PFM13L
40
2L
PFM11L
55
40
55
Point By Point FC Readings
Distance in Feet
.35 Fc
.5 Fc
1 Fc
2 Fc
2.5 Fc
MULTIPLIERS FOR OTHER LED FLOODLIGHTS
Luminaire
Series
Wattage
Lumens*
PFM5L
64
4386
PFM7L
89
6720
PFM9L
121
8478
PFM11L
149
10420
*PFM 13L output is 12,940.
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Page 87 of3 103
Copyright© 2013 Cooper Crouse-Hinds
Catalog
Number
DSX1 LED 30C 1000 40K 3TM MVOLT SPA DD
Notes
FEATURES & SPECIFICATIONS
INTENDED USE — Ideal for use in food processing, manufacturing, industrial, schools, gymnasiums and
exterior retail environments. Fiberglass enclosure protects fixture while remaining easy to service and
clean. Certain airborne contaminants can diminish integrity of acrylic. Click here for Acrylic
Environmental Compatibility table for suitable uses.
Type
AL1
High-Pressure Hose-Down
CONSTRUCTION — One-piece 5VA rated fiberglass housing with continuous poured-in-place, closed-cell
gasket. Tool-less ballast and wiring access.
FHE
OPTICS — Injection-molded, impact-resistant clear acrylic diffuser with frosted ends and side lineal
prisms is standard (.080" thick), securely tethered to fixture for ease of maintenance. UV stabilized polycarbonate diffuser option also is available (.080" thick). Stainless steel latches (12) included. Reflectors are
precision-formed, high-performance, segmented optics utilizing premium specular aluminum. Provides
95% reflectivity and warranted for 25 years.
ELECTRICAL — Ballasts: Thermally protected, resetting, Class P, HPF, Sound Rating A+. UL listed wire,
rated for required temperatures, used throughout. T8 ballast starting temperature is -18°C (0°F) and T5HO
starting temperature is -29°C (-20°F).
FOOD PROCESSING
2-, 3-, 4- or 6-lamp, T5HO, T5 or T8
Lamps: 4100K lamps standard. Secured with rotary locking lampholders for ease of re-lamping and to
minimize disconnection due to vibration or incidental contact.
INSTALLATION — Surface conduit entry provisions with watertight plugs are standard. Stainless steel
universal hanging clips included for suspension with aircraft cable (cable not included). Optional stainless
steel V-hooks available for chain hanging (chain not included).
LISTINGS — UL/C-UL listed to US and Canadian Safety Standard. NOM Certified (see Options). UL listed for
40°C ambient (except six-lamp 54T5HO, which is UL listed at 35°C ambient). Suitable for wet location. IP65,
IP66 and IP67 rated and certified to meet NSF Splash Zone 2. NEMA 4X. 1500 PSI hose-down.
6
(15.2)
Specifications
WARRANTY — 1-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Length: 52.0 (132.0)
Width: 14-5/8 (37.1)
Depth: 6 (15.2)
Weight: 26.2 lbs. (11.88 kg)
Note: Specifications subject to change without notice.
All dimensions are inches (centimeters) unless otherwise specified.
14-5/8
(37.1)
Actual performance may differ as a result of end-user environment and application.
ORDERING INFORMATION
Example: FHE 454L 1/4
Lead times will vary depending on options selected. Consult with your sales representative.
FHE
Series
Lamp type1
FHE 15"X4'
T5HO lamps
254L 2 lamps,
54W
354L 3 lamps,
54W
454L 4 lamps,
54W
654L 6 lamps,
54W
Shielding
T5 lamps
228T5L 4 lamps,
28W
328T5L 3 lamps,
28W
428T5L 4 lamps,
28W
628T5L 6 lamps,
28W
Ballast
T5/T5HO
(blank)
ACRP
T8
(blank)
GEB10IS
GEB10ISL
GEB10PS
(blank)
PCL
Clear acrylic
Clear
polycarbonate
Voltage
White ballast cover
(blank) General
distribution
Specular reflector
ND
Narrow
distribution
SD
Spread
distribution
(blank)
HVOLT
Ballast configuration
MVOLT;
120-277V
347-480V2
(blank)
1/3
1/4
2/3
1/41/2
Options3
1.0 BF, PRS
1.0 BF, Advance cool running plus
1.18 BF, IS
.88 BF, IS
.76 BF, IS
.88 BF, PRS
6' white cord, 16/3, no plug, wet location
12' white cord, 16/3, no plug, wet location
RMK
PMP
Rigid mount kit, 18 gauge stainless steel
Pendant monopoint7
CS88
6' Brad Harrison 16/3 cord and straight
blade plug set4
Reloc OnePass 5' installed5
Emergency lighting (1400 lumens)4, 6
Stainless steel V-hook and brackets
Surface mounting bracket
End mount supension bracket
WLF
MSI__
TRS
NOM
RIF_
DL
Wet location fitting (two pre-installed, 40" off centers)
Wet location 360° motion sensor8,9
Tamper-resistant screws10
Meets Mexican standards
Radio interference filter11
Damp location listed
OCS
EL14DW
MHKB
SMB
EMK
Stainless steel V-hook and brackets
3' double chain13
10' adjustable aircraft cable, Y, 2-toggle
10' adjustable aircraft cable, single hook14
Torx® T10 screwdriver for TRS option
All two-lamp ballasts
One, three-lamp ballast2
One, four-lamp ballast2
Two, three-lamp ballasts2
One, four-lamp and one,
two-lamp ballast2
Lamps installed12
CS89
CS89L12
Accessories: Order as separate catalog number.
MHKB
MHCH36
FHEACT120
MHHK120
RK1 T10DRV
T8 lamps
232L 2 lamps,
32W
332L 3 lamps,
32W
432L 4 lamps,
32W
632L 6 lamps,
32W
Distribution
Notes
1 To order fixtures WITHOUT lamps, remove the "L" from the description
(EX: FHE 454).
2 Not available with 28T5.
3 For additional options consult factory.
4 Must specify voltage.
5 Requires DL option
6 900 lumens for T5HO. UL listed for 55°C. Output in emergency mode
varies with ambient temperature (approx. 944 lumens at 25°C and 911
lumens at 45°C. Single-lamp operation only. Not available with HVOLT.
7 Housing pre-drilled with WLF in center; additional support cables required.
8
9
10
11
12
13
14
(blank) 85 CRI, 841
LP830
85 CRI, 830
LP835
85 CRI, 835
LP850
85 CRI, 850
Energy-saving
T5 49W lamps
P841E49 F54T5H0/841
P835E49 F54T5H0/835
P850E49 F54T5H0/850
For mounting up to 20', specify MSI20; for mounting up to
40', specify MSI40. IP65 rated but not recommended for high
pressure hose down.
GEB10PS recommended.
Stainless steel Torx® T10 screws with center reject pin.
Use RIF1 for one filter per fixture & RIF2 for one filter per ballast.
Alternate lamp color need only be specified if pre-installed
lamps are provided.
For use with MHKB option.
For use with EMK option.
Page 88 of 103
INDUSTRIALFHE-T5HO-T8
FHE Fluorescent High-Pressure Hose-Down, T5, T5HO and T8
DIMENSIONS
Inches (centimeters). Subject to change without notice.
6
(15.2)
52
(132.0)
14-5/8
(37.1)
Thermal Factor to Apply in Illuminance Calculations*
34°F
0°F
-20°F
Fixture
# Lamps
F54T5HO
F32T8
F54T5HO
F32T8
F54T5HO
F32T81
FHE
4 lamp
1.14
1.10
0.97
0.90
1
0.63
0.51
FHE
6 lamp
1.13
1.12
1.28
1.15
1.112
1.02
1
1
* Also apply appropriate factors for lumen depreciation, dirt and ballast factor.
* Factors for F32T8 are based upon 32-watt lamps using high ballast factor ballasts, so an appropriate high ballast factor (typically
1.12 to 1.20) should be used.
* For F32T8 lamps, use manufacturer's rated lumens (initial) per lamp.
* For F54T5HO lamps, use 4450 lumens (initial) per lamp.
1 Not recommended.
2 For continuous operation only
PHOTOMETRICS
Consult factory for photometric information.
TEST NO: ABA200972
LUMINAIRE CATALOG NO.: FHE 654L ND
LUMENS PER LAMP: 4450
Coefficients of Utilization
20%
80%
70%
50% 30% 10%
50% 30% 10%
75 75 75
77 77 77
65 62 60
67 64 61
57 52 49
58 53 49
50 45 41
51 45 41
44 39 35
35
45 39
40 34 30
41 35 30
36 30 26
37 31 26
33 27 23
33 28 23
30 25 21
30 25 21
27 22 19
28 23 19
25 21 17
26 21 17
pf
pc
pw
0
1
2
3
4
5
6
7
8
9
10
50%
50% 30% 10%
71 71 71
62 59 57
54 50 47
47 43 40
42 38 34
38 33 29
34 29 26
31 27 23
29 24 21
27 22 19
25 20 17
RCR
RCR
pf
pc
pw
0
1
2
3
4
5
6
7
8
9
10
TEST NO: ABA200975
LUMINAIRE CATALOG NO.: FHE 454L ND
LUMENS PER LAMP: 4450
Zonal Lumen Summary
Zone Lumens % Lamp % Fixture
0° - 30° 4789.4 17.9
27.4
0° - 40° 7621.2 28.5
43.5
0° - 60° 12733.3 47.7
72.7
0° - 90° 16817.2 63.0
96.0
90° - 180° 691.9
2.6
4.0
0° - 180° 17509.1 65.6
100.0
TEST NO: ABA200981
LUMINAIRE CATALOG NO.: FHE 432L ND
LUMENS PER LAMP: 2950
pf
pc
pw
0
1
2
3
4
5
6
7
8
9
10
50%
50% 30% 10%
83 83 83
72 69 67
63 58 55
55 50 46
49 43 39
44 38 33
39 34 29
36 30 26
33 27 23
30 25 21
28 23 19
RCR
RCR
Coefficients of Utilization
20%
70%
50% 30% 10%
88 88 88
76 73 70
66 61 57
58 52 47
51 45 40
46 39 34
41 34 30
37 31 26
34 28 23
31 25 21
29 23 19
80%
50% 30% 10%
90 90 90
78 74 71
68 62 57
59 53 48
52 45 40
47 40 34
42 35 30
38 31 26
35 28 24
32 25 21
29 23 19
Zonal Lumen Summary
Zone Lumens % Lamp % Fixture
0° - 30° 3399.9 19.2
25.1
0° - 40° 5527.2 31.2
40.8
0° - 60° 9869.8 55.8
72.9
0° - 90° 13023.2 73.6
96.2
90° - 180° 508.1
2.9
3.8
0° - 180° 13531.3 76.4
100.0
One Lithonia Way Conyers, GA 30012
Coefficients of Utilization
20%
70%
50% 30% 10%
101 101 101
88 84 81
76 71 66
67 61 55
60 53 47
54 46 41
49 41 36
44 37 32
41 34 29
37 31 26
35 28 24
80%
50% 30% 10%
104 104 104
90 86 82
78 72 67
69 62 56
61 54 48
55 47 41
50 42 36
45 37 32
41 34 29
38 31 26
35 28 24
50%
50% 30% 10%
96 96 96
83 80 78
73 68 64
64 59 54
57 51 46
52 45 40
47 40 35
43 36 31
39 33 28
36 30 26
33 27 23
Zonal Lumen Summary
Zone Lumens % Lamp % Fixture
0° - 30° 2914.9 24.7
28.2
0° - 40° 4642.9 39.3
44.8
0° - 60° 7769.6 65.8
75.1
0° - 90° 10026.8 85.0
96.9
90° - 180° 325.4
2.8
3.1
0° - 180° 10352.3 87.7
100.0
INDUSTRIAL:
50%
50% 30% 10%
86 86 86
75 72 70
66 62 58
58 54 49
52 47 43
47 42 37
43 37 33
39 34 30
36 31 27
34 28 24
31 26 22
Zonal Lumen Summary
Zone Lumens % Lamp % Fixture
0° - 30° 4370.5 24.6
31.4
0° - 40° 6760.0 38.0
48.6
0° - 60° 10724.0 60.2
77.1
0° - 90° 13579.4 76.3
97.6
90° - 180° 338.7
1.9
2.4
0° - 180° 13918.1 78.2
100.0
TEST NO: ABA200978
LUMINAIRE CATALOG NO.: FHE 632L ND
LUMENS PER LAMP: 2950
pf
pc
pw
0
1
2
3
4
5
6
7
8
9
10
Coefficients of Utilization
20%
80%
70%
50% 30% 10%
50% 30% 10%
90 90 90
93 93 93
78 75 73
80 77 74
69 64 60
71 65 61
61 55 51
62 56 51
55 48 43
44
56 49
49 43 38
50 43 38
45 38 34
45 39 34
41 34 30
41 35 30
37 31 27
38 32 27
35 29 25
35 29 25
32 26 22
33 26 22
FHE-T5HO-T8
Phone: 800-315-4963 Fax: 770-981-8191
Page
ofRev.103
www.lithonia.com © 2009-2013 Acuity Brands Lighting, Inc.
All rights89
reserved.
07/09/13
www.sylvania.com
QUICKTRONIC® POWERSENSE® T8
Universal Voltage Dimming Systems
Fluorescent Controllable
Lighting Systems
High Efficiency Series
Lamp / Ballast Guide
Primary Lamp Types
FO32, FBO32 & FBO31
Also operates:
FO30/SS, FO28/SS, FO25/SS, FO25,
FO17, FBO24 & FBO16
Key System Features
•Industry’s first ballast that combines
dimming inputs from 0-10V and/
or two-wire AC dimming providing
maximum flexibility
•Compatible with low voltage and
power line fluorescent dimmers
• High Efficiency
•NEMA Premium Electronic Ballast
Program compliant
• Lamp Detection Technology
•Universal voltage (120-277V)
• 100 - 5% Dimming Range
•PROStart® Programmed Rapid Start
•Anti-flash circuitry - turns on in
dimmed mode
•Operates at >42kHz
•QUICK 60+ ballast and lamp warranty
•RoHS compliant
•Lead-free solder and manufacturing
process
SYLVANIA QUICKTRONIC High Efficiency,
POWERSENSE T8 electronic ballasts offer
several advantages:
PO W E RSE NSE
T 8 DI M
32W T8 - SYLVANIA OCTRON® lamps
1-lamp QTP1x32T8/UNV DIM
2-lamp QTP2x32T8/UNV DIM
3-lamp QTP3x32T8/UNV DIM
4-lamp QTP4x32T8/UNV DIM
• Wide Dimming Range: operate linear
fluorescent T8 lamps over a 100-5%
dimming range and provide true
versatility in controls selection.
• Industry’s Most Adaptable Dimming
Ballast: ballasts feature micro-controller
technology for compatibility with:
• low voltage controls
• power line fluorescent dimmers
• any line voltage from 120V to 277V
• Unmatched Performance: patented
lamp detection technology that virtually
eliminates variations in brightness from
lamp-to-lamp and provides uniform
lighting throughout the dimming range.
At light levels of >75% unnecessary
lamp-coil power is turned off, delivering
energy efficiences comparable to nondimming Instant start electronic ballast.
This technology also eases installation
and troubleshooting by recognizing
failed lamps, faulty wiring or loose
connections, and shutting down.
When the problem is corrected,
the system restarts automatically.
• NEMA Premium Electronic Ballast
Program compliant. This program
promotes the use of high efficiency
T8 electronic ballasts by meeting
or exceeding the Ballast Efficiency
Factors, (BEF) established by the CEE,
(Consortium for Energy Efficiency). For
additional information on this program
go to: www.cee1.org or www.nema.org
QUICKTRONIC POWERSENSE ballasts operate from standard low
voltage (0-10VDC) fluorescent controllers or compatible 2-wire
power line fluorescent dimmers, making them ideal for individual
office lighting or automated building applications, both in new
construction and retrofit projects.
For more advanced systems, such as daylight harvesting or
building automation applications, standard low voltage devices
All QUICKTRONIC POWERSENSE ballasts include a line voltage
protection circuit, which protects the ballast in the event that line
voltage is inadvertently applied to the low voltage control inputs.
DAYLIGHT HARVESTING SCENARIO
SAVINGS PER YEAR* vs LIGHT LEVEL
(QTP T8 Dimming Ballast)
$50.00
Savings per Year ($)
(0-10VDC, Class 1 or 2) are used to control the lighting system.
In this daylight harvesting example, each lighting fixture (or
fixture row) is controlled by it’s own photosensor; regulating
the light output to compensate for changes in natural daylight.
Depending upon the specific application, energy savings of up
to 60% compared to fixed output T8 electronic systems can be
realized.
Fixture
1
$38.28
$40.00
Window / Natural Light Source
Application Information
are ideally suited for:
•Occupancy sensors
•Daylight harvesting
•Energy management
•Load shedding
•New construction
•Retrofit
Setting the standard for quality,
QUICKTRONIC POWERSENSE ballasts
are covered by the QUICK 60+®
warranty, the first and most
comprehensive lamp & ballast
system warranty in the industry.
System Information
For the individual office or conference room, installation can be
streamlined by using a 2-wire power line fluorescent dimmer;
eliminating the need for additional control wires.
SYLVANIA QUICKTRONIC
POWERSENSE ballasts
These ballasts are RoHS compliant
and feature lead-free solder and
manufacturing process.
$30.00
4 Lamp Fixture
$19.80
$20.00
2 Lamp Fixture
$10.00
$0.00
0%
25%
50%
75%
Light
Sensor 1
Fixture
2
Light
Sensor 2
Fixture
3
Light
Sensor 3
Desired Illuminance Er
Constant setpoint value
100%
Light Level (%)
* FO32/XP lamps with QUICKTRONIC T8 POWERSENSE ballast
* Based on 4000 hrs/yr, $0.11/kWh, and 120V operation
* Savings per Year (@Light Level) = Cost of operation (100% Light Level) - Cost of operation (@Light Level)
ECS201R2 - 8/2011
Page 90 of 103
SPECIFICATION DATA
Catalog #
Date
Project
Prepared by
T8 POWERSENSE
Type
High Efficiency
Comments
Controls Guide
QUICKTRONIC® POWERSENSE® Controls Information
Controls Manufacturer
Fluorescent Building
Powerline
0-10 VDC
Photo Occupancy Management
ControllersControllers Cells Sensors Systems
PO W E RSE NSE
CO NT RO LS
Sylvania
X X XX X
www.sylvania.com/controls
Acuity Brand Controls
X X XX X
www.acuitybrandscontrols.com
Blue Ridge Technologies
X X XX X
www.brtint.com
Cooper Greengate
X XX X
http://greengate.coopercontrol.com
Encelium
X XX X
www.encelium.com
Hunt Dimming
X X X
www.huntdimming.com
Lehigh Electric Products
X X X
www.lehighdim.com
Leviton
X X XX
www.leviton.com
Sensor Switch
XX
www.sensorswitch.com
Siemens Building Technology
X
http://sbt.siemens.com
Starfield Controls
X XX X
www.starfieldcorp.com
Watt Stopper X X XX X
www.wattstopper.com
Please contact controls manfacturer to order/specify controls. For the latest controls list go to www.sylvania.com
Also, for more information, refer to the LCA (Lighting Controls Association) site: http://lightingcontrolsassociation.org
Dimensions:
1 & 2 lamp enclosure
Overall: 9.5" L x 1.68" W x 1.0" H (241 x 43 x 25 mm)
Mounting: 8.90" (226 mm)
Weight: 1.1 lbs each (500 g)
8.70 mm
Slot
3 & 4 lamp enclosure
Overall: 16.7" L x 1.68" W x 1.0" H (425 x 43 x 25 mm)
Mounting:16.2" (411 mm)
Weight: 2.1 lbs each (950 g)
QTP2x28T5/UNV DIM TCL
Width
Length
Width
43mm
(1.68")
Wiring:
Leads Only
Mounting
411.3mm
(16.2")
Height
25.4mm
(1.0")
Input & Control
Wiring Options:
Install and wire these ballast and controls
in accordance with the National Electrical
Code (NEC), all applicable Federal, State and
local electrical codes, as well as the specific
instructions provided with the compatible
control that you purchased. Installation should
be performed by qualified personnel only.
These instructions are guidelines only.
Installation may vary for different controls/
fixtures/applications. Be sure to follow the
control instructions and all applicable codes
and standards when installing dimming
systems.
Mounting
Length
Height
Warning
Length
425mm
(16.7")
Please contact controls manufacturer listed
in the OSRAM SYLVANIA Inc. controls cross
reference for compatible controls and
instruction wiring.
NOTES:
1. Dimming ballasts source < 0.5mA
(0-10VDC control input).
2. Powerline controls must be rated for the
type (e.g. Fluorescent Phase-control)
and size (e.g. 600W, 1000W, 1500W &
2000W etc.) of the connected load. Do
NOT use incandescent powerline controls;
incandescent dimmers are not rated for
fluorescent loads and are NOT compatible
with POWERSENSE ballasts.
LOW-VOLTAGE
LOW-VOLTAGE
CONTROL CONTROL
POWERLINEPOWERLINE
CONTROL CONTROL
LINE
LINE
BLACK
BLACK
NEUTRAL
NEUTRAL
WHITE
WHITE
Class 1 or
Class 2
VIOLET (+)
VIOLET
0-10VDC
Class
1 or (+)0-10VDC
GREY (-)
GREY
(-) < 0.5mA
2
< 0.5mClass
A
LINE
LINE
BLACK
NEUTRAL
NEUTRAL
WHITE
INSULATE
UNUSED LEADS
VIOLET (+)
INSULATE
GREY (-)
UNUSED LEADS
BLACK
WHITE
VIOLET (+)
GREY (-)
Control Specifications/model numbers may change.
Please consult manufacturers listed for their latest control models and to order their controls.
OSRAM SYLVANIA
National Customer
Service and Sales Center
1-800-LIGHTBULB
(1-800-544-4828)
www.sylvania.com
Specifications subject to change without notice.
Page 91 of 103
SPECIFICATION DATA
Catalog #
Date
Project
Prepared by
T8 POWERSENSE
Type
High Efficiency
Comments
QUICKTRONIC® POWERSENSE® T8 Dimming UNV - Dimming Control Wiring Examples
Industry’s 1st Ballast That Allows POWERLINE Fluorescent Control AND 0-10Vdc Control Input Simultaneously
2-wire Powerline AND 0-10Vdc Control with POWERSENSE Ballasts
POWERSENSE
WIRING & CONTROLS
2-wire
Fluorescent
Powerline Dimmer
LINE
Fluorescent AC Dimming
No Control Wires
• Occupant Wallbox Dimming
• Lighting Panel Dimming
120 or 277V
Black (Hot)
Black
Neutral (White)
Black
White
Violet (+)
Gray (-)
• Excellent for Retrofit
DIMMING
BALLAST
Black
White
Violet (+)
Gray (-)
To
Fluorescent
Lamps
DIMMING
BALLAST
Violet
• Building Management
0-10V
Control
• Demand Response Override
Gray
Class 1 or Class 2 circuit
0-10Vdc Low Voltage
Industry Standard Interface
• Daylight Harvesting
To
Additional
Ballasts
To
Fluorescent
Lamps
Wallbox Style 2-wire Powerline Control Wiring Example
2-wire Powerline Control with POWERSENSE Ballasts
Black (Hot)
LINE
Powerline Control Specs:
Specification-grade controls are available for 120V or 277V
operation of controllable analog electronic fluorescent ballasts.
Controls must be suitably rated for both the type (e.g. Fluorescent
Phase-control) and size (e.g. 600W) of the connected load.
2-wire
Fluorescent
Powerline Dimmer
Black
White
Violet (+)
Gray (-)
ELOGIC MANUAL CONTROL SLIDE FLUORESCENT PHASE CUT DIMMER
™
Item
Number
45045
45046
Maximum Input Current (A)
(# of gangs)
Double
Triple
OSRAM SYLVANIA
Description
Single
Input Voltage (V)
Color
ELMC-SL-FLPCWALL/120-WH 5.0A
4.5A 4.0A
120
ELMC-SL-FLPCWALL/277-WH 2.2A
2.0A 1.7A
277
To
Additional
Ballasts
Black
Neutral (White)
DIMMING
BALLAST
To
Fluorescent
Lamps
Black
White
Violet (+)
Gray (-)
Integral
Switch
White
Single Pole
CAUTION:
For 2-wire Powerline wiring, individually insulate (cap-off)
all unused Violet & Gray leads as shown.
White
DIMMING
BALLAST
To
Fluorescent
Lamps
Examples: Leviton IPX series operate as
single pole or 3-way models. Available in
120V and 277V models. Leviton 6668-1W
(white) 120V single pole fluorescent dimmer.
Wallbox Style 0-10V Control with Power Switch Wiring Example
LINE
0-10V DC Control with POWERSENSE Ballasts
120 or 277V
Black (Hot)
Neutral (White)
Black
White
Violet (+)
Gray (-)
0-10V
Control
Violet
Line
Voltage
Switch
Black
White
Violet (+)
Gray (-)
To
Fluorescent
Lamps
DIMMING
BALLAST
To
Fluorescent
Lamps
To
Additional
Ballasts
On/Off
Switch (120/277V)
Gray
0-10Vdc
Wallbox
Control with
Line Voltage
Switch
DIMMING
BALLAST
Class 1 or Class 2 circuit
Black
Black
Examples: Lithonia model ISD BC
or Leviton IP 710 Series (These
0-10V dc, 120/277V models can be
wired for single pole application
(shown); these models can also be
wired for 3-way applications.)
Slide Dimmer
0-10V
Photo Sensor 0-10V Wiring Example
120 or 277V
Black (Hot)
Photo Sensor
Standard0-10V Wiring Example
Photo Sensor 0-10V Wiring Example
LINE
LINE
0-10V DC Control with
POWERSENSE
0-10V
DC Control Ballasts
with POWERSENSE Ballasts
Standard
Line Voltage
Switch
Black
Neutral (White)
Black
White
Violet (+)
Gray (-)
120 or 277V
Black (Hot)
Line Voltage
Switch
Black
Neutral (White)
DIMMING
BALLAST
To
Fluorescent
Lamps
Class 1 or Class 2 circuit
Black Black
White White
DIMMING
DIMMING
To
To
Violet (+)
Violet (+)
Fluorescent
BALLAST
Fluorescent
BALLAST
Gray (-)Gray (-)
LampsLamps
Class 1 or Class 2 circuit
Black To
White Additional
DIMMING
Violet (+) Ballasts
BALLAST
Gray (-)
To
Fluorescent
Lamps
To
Additional
Ballasts
0-10V
Control
Violet
Photo
Sensor
0-10V
0-10V
Control
Gray
Violet
Photo
Sensor
0-10V
Gray
ELOGIC DAYLIGHT SENSOR ORDERING INFORMATION
BallastOutput Max.
Item
OSRAM SYLVANIA
Control Voltage
Input
Lamp
Number
Description
Type
Method
(VDC) Current (mA)
Type
Sensor & Control for
45030
ELSC-DLH-TVLAMP/BUS
Analog
0-10V
6
T8 or T5 or T5HO
Daylight Harvesting
OSRAM SYLVANIA National Customer Service and Sales Center 1-800-LIGHTBULB (1-800-544-4828) www.sylvania.com
Specifications subject to change without notice.
Page 92 of 103
SPECIFICATION DATA
Catalog #
Date
Project
Prepared by
T8 POWERSENSE
Type
®
High Efficiency
Comments
Performance Guide
PO W E RSE NSE
T 8 DI M
Item
OSRAM SYLVANIA Number Description Input Rated
Ballast
Input
System1
Current Lamp Lumens No. of Factor System Mean Power (W) Efficacy
(AMPS) Type (lm) Lamps (BF) Lumens Lumens 120V 277V (lm/W) BEF2
50705
QTP 1x32T8/UNV DIM-TC
0.27/0.12 FO32XP
3000
1
0.88
0.05
2640
150
2480
140
30
8
30
88
2.93
8
0.24/0.11 FO30/SS
2850
1
0.88
0.05
2510
145
2360
135
28
8
28
90
8
3.14
0.22/0.10 FO28/SS
2725
1
0.88
0.05
2400
135
2255
130
25
8
25
96
8
3.52
0.20/0.09 FO25/SS
2475
1
0.88
0.05
2180
125
2045
115
23
7
23
95
3.83
7
50707
QTP 2x32T8/UNV DIM-TC
0.51/0.24 FO32XP
3000
2
0.88
0.05
5280
300
4965
280
59
14
57
93
1.54
14
0.48/0.20 FO30/SS
2850
2
0.88
0.05
5015
285
4715
270
55
14
53
95
14
1.66
0.43/0.18 FO28/SS
2725
2
0.88
0.05
4795
275
4510
255
51
13
49
98
13
1.80
0.39/0.16 FO25/SS
2475
2
0.88
0.05
4355
250
4095
235
45
13
44
99
2.00
13
50714
QTP 3x32T8/UNV DIM-TCL 0.73/0.30 FO32XP
3000
3
0.88
0.05
7920
450
7445
425
87
20
84
94
1.05
20
0.68/0.30 FO30/SS
2850
3
0.88
0.05
7525
430
7075
400
81
20
78
96
20
1.13
0.62/0.26 FO28/SS
2725
3
0.88
0.05
7195
410
6760
385
73
19
72
100
19
1.22
0.56/0.24 FO25/SS
2475
3
0.88
0.05
6535
370
6140
350
67
19
66
99
1.33
19
50716
QTP 4x32T8/UNV DIM-TCL 0.96/0.40 FO32XP
3000
4
0.88
0.05
10,560
600
9925
565
114
27
110
96
0.80
27
0.92/0.39 FO30/SS
2850
4
0.88
0.05
10,030
570
9430
535
107
26
104
96
26
0.85
0.82/0.35 FO28/SS
2725
4
0.88
0.05
9590
545
9015
510
98
25
95
101
25
0.93
0.74/0.32 FO25/SS
2475
4
0.88
0.05
8710
495
8190
465
91
24
89
98
0.99
24
Products are all 10-pack.
*Striation might occur with SUPERSAVER lamps.
Black
Red
1: System Efficacy calculation based on lowest input power value.
Red
White
2: Ballast Efficiency Factor (BEF) shown = (Ballast Factor x 100) divided by Input Power (Note: calculation based on lowest wattage
value).
ELECTRONIC
BALLAST
Violet (+)
Wiring Diagrams
Blue
Grey (-)
Output Wiring: Lamp wiring for dimming ballasts
can differ significantly from Blue
non-dimming ballasts and from
other manufacturers dimming ballasts. Take care to connect lamp lead wires as shown on the applicable
ballast diagram. Lamp Seasoning: For optimal performance, fluorescent lamps may require seasoning for up to 12 hours prior to low temperature starting &
low level dimming. Refer to NEMA LSD 23-2002 Lighting Systems Division: Recommended Practice — Lamp Seasoning
LAMP 1 for Fluorescent Dimming Systems
1 lamp
2 lamp
Black
White
Black
White
Red
Red
ELECTRONIC
BALLAST
Violet (+)
Grey (-)
Violet (+)
Grey (-)
Blue
Blue
LAMP 1 1
LAMP
LAMP 1
Black
White
ELECTRONIC
BALLAST
3 lamp
Violet (+)
Grey (-)
Black
White
Violet (+)
Grey (-)
ELECTRONIC
BALLAST
LAMP 1 1
LAMP
LAMP 2
Red
Red
Blue
Blue
Yel/Blk
Yellow
Yellow
ELECTRONIC
BALLAST
Red/White
LAMP 1
LAMP 2
Yellow
Yel/Blk
Black
White
Violet (+)
Grey (-)
Yellow
Blue
Red
4 lamp
LAMP 3
ELECTRONIC
BALLAST
Red/White
Red/Black
LAMP 1
Red/White
LAMP 2
Yellow
Yellow/Black
50707 QTP 2 x 32T8 / UNV DIM-TC
Data based on F32T8
Starting Method: Programmed Rapid Start
Circuit Type: Series
Lamp Frequency: >40 kHz
Lamp CCF: Less than 1.7
Starting Temp: 50°F/10°C minimum
for OCTRON T8 lamps
Input Voltage: 120-277V, ±10%
Input Frequency: 50/60 Hz
THD: <10% @ Full Output
Power Factor: >98% @ Full Output
UL Listed Class P, Type 1 Outdoor
CSA or C/UL Certified
70°C Max Case Temperature
FCC 47CFR Part 18 Non-Consumer
Class A Sound Rating
RoHS compliant3
ANSI C62.41 Cat. A Transient Protection
Remote mounting (Max. wire length from
ballast case to lampholder)
• up to 8ft for full wattage T8s
• no remote mounting for SUPERSAVER
3 Complies with European Union Restriction
of Hazardous Substances Directive (Directive
EC 2002/95)
Control Information
QUICKTRONIC POWERSENSE ballasts are
compatible with a wide range of low voltage
(0-10VDC) and power line fluorescent controllers
available from various manufacturers.
Low Voltage Control Specs: Ballast will source
up to 0.5mA for 0-10VDC control purposes.
May be wired as a Class 1 or Class 2 circuitconsult Local and National Electrical Codes.
Power Line Control Specs: Specificationgrade fluorescent controls are available
for 120V or 277V operation of controllable
analog electronic fluorescent ballasts.
Controls must be suitably rated for both the
type (e.g. Fluorescent Phasecontrol) and size
(e.g. 600W) of the connected load.
QUICKTRONIC products are covered by the
QUICK 60+® warranty, a comprehensive
lamp and ballast system warranty. For
additional details, refer to the QUICK 60+
warranty bulletin.
Yellow
Blue/White
Blue/Black
LAMP 3
Blue/White
LAMP 4
Blue
Item Number
Specifications
System Life / Warranty
LAMP 2
Red
Red
Blue
Blue
Red Yel/Blk
Yellow
Red/White
Yellow
Red/Black
Data based on SYLVANIA OCTRON® lamps
shown. QUICKTRONIC® POWERSENSE
ballasts are also compatible with other
manufacturers equivalent lamp types that
meet ANSI specifications, including F17,
F25, F32, U-Bend equivalent lamps and
SUPERSAVER lamps.
System Type - DIMMING/Case Size
QUICKTRONIC
Line Voltage (120-277V)
Number of Lamps (1, 2, 3, 4)
Primary Lamp Wattage
OSRAM SYLVANIA
National Customer
Service and Sales Center
1-800-LIGHTBULB
(1-800-544-4828)
www.sylvania.com
Specifications subject to change without notice.
SYLVANIA,
the system solution, QUICK60+, POWERSENSE, See the World in a New Light, PROStart, OCTRON and SUPERSAVER are registered trademarks of OSRAM SYLVANIA Inc.
ELOGIC is a trademark of OSRAM SYLVANIA Inc. QUICKTRONIC is a registered trademark of OSRAM AG. NEMA Premium is a registered trademark of National Electrical Manufacturers Association.
Page 93 of 103
©2011 OSRAM SYLVANIA
High Efficiency, T8 Controllable Lighting Systems, UNV (120-277V)
Types BNLO1 & BNLO2
www.sylvania.com
QUICKTRONIC® PROStart® PSN
T8 Universal Voltage Systems
Normal Ballast Factor
Lamp / Ballast Guide
Primary Systems
32W T8 OCTRON® lamps
1-lamp QTP1x32T8/UNV PSN-TC
2-lamp QTP2x32T8/UNV PSN-TC
3-lamp QTP3x32T8/UNV PSN-SC
4-lamp QTP4x32T8/UNV PSN-SC
Also operates:
FBO32, FBO31, FO25, FBO24, FO17,
FBO16, FO30/SS, FBO30/SS (30W),
FBO29/SS, FO28/SS (28W) &
FO25/SS (25W)
Key System Features
•PROStart® Programmed Rapid Start
• Increase lamp life
• Ideal for occupancy sensors
•NEMA Premium Electronic Ballast
Program compliant
•Low profile enclosures:
• 1.00" high “Thin Can”
• 1.18" high “Small Can”
•Min. Starting Temp:
• 0°F (-18°C) for T8 lamps
• 60°F (16°C) for Energy Saving
T8 lamps
•Operates at >40kHz to avoid interference with infrared control systems
•Universal Input Voltage (120-277V)
•RoHS compliant
•Lead-free solder, printed circuit
board and manufacturing process
Application Information
SYLVANIA QUICKTRONIC
PROStart T8 ballasts
are ideally suited for:
•Any applications where extended
lamp life is required to reduce
maintenance costs
•Energy retrofits
•Occupancy sensors
•Building control systems
SYLVANIA QUICKTRONIC PROStart
programmed rapid start electronic ballasts
operate linear U-bend SUPERSAVER®
equivalent T8 lamps in applications where
extended lamp life is required.
QUICKTRONIC PROStart ballasts utilize a
micro-controller based circuit to apply a
precise amount of cathode heat prior to
starting the lamp. This ensures that the
cathodes have reached optimum temperature before the lamp is started. Once the
lamp has ignited, the ballast eliminates the
cathode voltage which optimizes system
efficiencies similar to instant start ballasts.
QUICKTRONIC PROStart ballasts are NEMA
Premium Electronic Ballast Program
compliant. The program promotes the use
of high efficiency T8 electronic ballasts by
meeting or exceeding the Ballast Efficiency
Factors, (BEF) established by the CEE,
(Consortium for Energy Efficiency). For
additional information on this program go
to: www.cee1.org or www.nema.org
All SYLVANIA Professional Series (QTP)
electronic ballasts feature high power
quality (<10% THD), lightweight, low
profile designs.
and individual ballast sales
• Reduced waste
• Easy removable bands
• No tangled wires
This product is also offered in new banded
packaging and pallet packs.
• Distributor-friendly for easy stocking
These ballasts are also RoHS compliant
and feature lead-free solder, printed
circuit boards and manufacturing process.
System Information
Relative
Input
Mean
Mean
%
Lamp &
Power Initial
Initial
System
Light
Energy
Ballast Type
(W) Lumens
LPW
Lumens Output
Savings
QUICKTRONIC PROStart ballasts provide
optimum starting conditions to provide over
2-FO32/700 100,000 switching cycles for occupancy sensor QTP 2x32 ISN
and building control system applications.
QUICKTRONIC PSN UNV operates from 120V
through 277V, eliminating “wrong voltage”
wiring errors and reducing the number of
models in inventory by half.
In addition to substantial energy savings,
QUICKTRONIC PSN ballasts deliver an optimized
programmed start which extends lamp life.
This advanced starting process drastically
reduces the amount of cathode sputtering,
resulting in improved lamp life in all applications including short start cycles.
QUICK 60+® warranty coverage is included
when you use SYLVANIA lamps and ballasts
together as a system. See the QUICK 60+
warranty bulletin for complete details.
The QUICKTRONIC PROStart ballasts are ideally
suited for applications requiring extended lamp
life. In short cycle applications, our PROStart
ballasts will deliver three times the number of
start cycles compared to electronic Instant Start
ballasts.
%
Lamp
Life
59
4930
84
4435
Baseline
Baseline
Baseline
2-FO32/800/XP
QTP 2x32 ISN
59
5280
89
4965
112%
0%
100%
2-FO32/800/XP
QTP 2x 32 PSN
59
5280
89
4965
112%
0%
150%
2-FO28/SS
QTP 2x32 PSN
52
4800
92
4510
102%
12%
150%
OCTRON® T8 Lamp Life Comparison
45000
40000
35000
Lamp Life (Hours)
Q TP T8 PSN
Professional Series
30000
25000
20000
15000
10000
PROStart w/ XP, SS & XPS lamps
Instant Start w/ XP, SS & XPS lamps
5000
Instant Start w/ 700 Series T8 lamps
0
15 min
30 min
1 hr
3 hr
Start Cycle
12 hr
ECS221 - 1/2011
Page 94 of 103
Cont.
Black
White
Red
Red
BALLAST
White
Green
Black
SPECIFICATION DATA
Red
Catalog #
LAMP
LAMP
LAMP
Comments
BALLAST
White
Green
Black
Blue
Red
Blue
BALLAST
BALLAST
LAMP
LAMP
Date
LAMP
LAMP
Project
White
Red
Blue
LAMP
Type
LAMP
LAMP
Blue
QUICKTRONIC 1x32LAMP
QUICKTRONIC 2x32
LAMP
Red
LAMP
Blue
Note: For one
lamp application, cap any blue lead. Insulate to 600 volts.
Prepared
by
QUICKTRONIC 3x32
Red
QUICKTRONIC FM (1 LAMP)
QUICKTRONIC FM (2 LAMP)
Note: For QT-FM green ground wire to terminal required.
Note: For QT-FM green ground wire to terminal required.
Blue
®
PSN UNV
Professional Series
Performance Guide
Start Systems UNV (120-277V)
PROStart® Programmed Rapid
Blue
White
T8 PROStart
Yellow Note: For two lamp application, cap any blue lead. Insulate to 600 volts.
cap any unused blue lead. Insulate to 600Black
volts.
KTRONIC 4x32
Normal Ballast Factor
White
Green
Black
White
Green
Red
InputBlack
Red
Q TP T8 PSN
Data based upon SYLVANIA OCTRON®
BALLAST
BALLAST
Rated
Ballast
Input
System
lamps shown. QUICKTRONIC® QTP
Current
Lamp
Lumens No. of Factor System
Mean Wattage Efficacy
PROStart ballasts are also compatible with
Black
Blue
(AMPS)
Type
(lm)
Lamps White
(BF)
Lumens Lumens
(W)
(lm/W)
BEF1
other lamp manufacturers equivalent lamp
Blue
LAMP
BALLAST Blue
Blue
types that meet ANSI specifications. QTP
Blue
0.26/0.11 FO32/700 2800
1
0.88
2465
2220
31/30
79/82
2.93
Red
Yellow
PROStart ballasts will also operate F17 &
Blue
0.26/0.11 FO32/XP
3000
1
0.88
2640
2480
31/30 85/88
2.93
Red
BALLAST
Blue
F25, SUPERSAVER® & U-Bend equivalent
LAMP
0.24/0.10 FO30/SS
2850
1
0.88 Red 2510
2360
29/28 LAMP
87/90 3.14
T8 lamps. Complete performance data is
0.23/0.09
FO28/SS
2725
1
0.88
2400
2255
27/26
89/92
3.38
ALLAST
QUICKTRONIC FM (2 LAMP)
QUICKTRONIC FM (1 LAMP)
available in the QUICKSYSTEMS section
For QT-FM green
ground wire to 3.83
terminal required.
0.20/0.09 FO25/SS Note:
2475
1ground wire0.88
2175
2045 Note:
24/23
91/95
For QT-FM green
to terminal required.
of the SYLVANIA Ballast Technology &
Note: For three lamp application, cap any unused blue lead. Insulate to 600 volts.
QTP 2x32T8/UNV PSN-TC 0.50/0.21 FO32/700 2800
2
0.88
4930
4435
59/56
84/88
1.57
Specification Guide.
QUICKTRONIC 4x32
51402
Banded Pack
0.50/0.21 FO32/XP
3000
2
0.88
5280
4965
59/56 89/94 1.57
51405
10-Pack
0.47/0.20 FO30/SS
2850
2
0.88
5015
4715
55/53 91/95 1.66
Specifications
51406
Pallet Pack
0.45/0.19 FO28/SS
2725
2
0.88
4800
4510
52/49 92/98 1.80
Data based on F32T8
Blue
Note: For one lamp application, cap any blue lead. Insulate to 600 volts.
Note: For two lamp application, cap any blue lead. Insulate to 600Black
volts.
0.39/0.17 FO25/SS
2475
2
0.88
4355
4095
46/44
95/99
2.00
Blue
White
Starting
Method:
P
rogrammed
Rapid-Start
QUICKTRONIC 2x40DL
QUICKTRONIC 3x40DL
KTRONIC 1x40DL
BALLAST
Blue
Red
Ballast Factor: 0.88
QTP 3x32T8/UNV PSN-SC 0.74/0.31 FO32/700 2800
3
0.88
7390
6655
88/85
84/87
1.04
Black
Blue
Circuit Type: Series
White
51403
Banded Pack
0.74/0.31 FO32/XP
3000
3
0.88
7920
7445
88/85 90/93 1.04
BALLAST
Blue
Lamp Frequency: >40 kHz
Black
Red
Blue0.70/0.29 FO30/SS
51410
10-Pack
2850
3
0.88
7525
7075
83/80 91/94 1.10
Blue
White
Lamp CCF: Less than 1.6
Black
51411
PalletBlue
Pack BALLAST
0.65/0.27 FO28/SS Black
2725
3
0.88
7195
6760
77/75
93/96
1.17
Blue
Red
BALLAST
White
Starting Temp:2
Blue
0.58/0.25
FO25/SS
2475
3
0.88
6535
6140
69/68
95/96
1.29
White
Red
0°F (-18°C) for OCTRON T8 lamps;
Red
Yellow
Red
QTP 4x32T8/UNV PSN-SC 0.99/0.41 FO32/700 Yellow
2800
4
0.88
9855
8870
118/113
83/87
0.78
60°F (16°C) for SUPERSAVER® T8 lamps
51404
Banded Pack
0.99/0.41 FO32/XP
3000
4
0.88
10,560
9925
118/113 90/94 0.78
Input Frequency: 50/60 Hz
LAMP 10-Pack
51415
0.93/0.39 FO30/SS
2850
4
0.88
10,030
9430
111/106 90/95 0.83
Low THD: <10%
LAMP
51416
0.88/0.36 FO28/SS
4 cap any blue
0.88
9015 Note:104/99
application,
92/97cap any blue
0.89
Note: For2725
one lamp application,
lead. Insulate9590
to 600 volts.
For two lamp
lead. InsulatePower
to 600 volts.
LAMP Pallet Pack
Factor: >98%
one lamp application,
cap any unused blue lead.QUICKTRONIC
Insulate to 600 volts.
0.77/0.32 FO25/SS
2475
4
0.88
8190
92/90
95/97 3x40DL
0.98
QUICKTRONIC
2x40DL 8710
QUICKTRONIC
1x40DL
LAMP
Voltage Range: ±10% of 120-277V
QUICKTRONIC
2x59*
rated line (108-305V)
Banded Pack, (add
“-B” to Description). Banded Pack and 10-Pack contain 10 pieces each. Pallet Pack contains 840 pieces, (add “-PAL” to Description).
QUICKTRONIC
2x96IS
1: Ballast Efficiency
Factor (BEF) shown = (Ballast Factor x 100) divided by InputQUICKTRONIC
Power (Note: calculation
based on lowest wattage value).
2x96HO
UL Listed Class P, Type 1, Outdoor
BALLAST
Yellow
Yellow
Item
OSRAM SYLVANIA
Number
Description
LAMP
QTP 1x32T8/UNV
PSN-TC Black
51399
Banded Pack LAMP
White
51400
10-Pack
Red
Blue
LAMP
51401
Pallet Pack
LAMP
SC
1 lamp
Black
White
Black/White
White
Red
Red
BALLAST
TC
Blue
Blue
Black
White
Yellow
Yellow
2 lamp
Red
Blue
Blue
TC
Red
Red
Blue
Blue
LAMP
LAMP
LAMP
LAMP
Note: For one lamp application, cap any unused blue lead. Insulate to 600 volts.
LAMP
QUICKTRONIC 2x59*
QUICKTRONIC
2x96IS
new revise lamp
1
3 lamp
Black
White
SC
Yellow
Yellow
QUICKTRONIC 2x96HO
Blue
Blue
Blue/White Black
Blue/White White
Red
Red
Red
Red
Black
White
4 lamp
TC
Blue
Blue
Wiring:
Leads only
(no connectors provided)
Item Number
SC
Blue
Blue
Blue/White
Blue/White
Red
Red
LAMP 1
LAMP 1
LAMP 2
LAMP 2
LAMP
LAMP 3
new revise lamp 1
Dimensions “TC & SC” Enclosure:
“SC” Overall: 9.5" L x 1.68" W x 1.18" H
“TC” Overall: 9.5" L x 1.68" W x 1.00" H
Mounting: 8.90"
Weight: 1.6 lbs each
Brown
Brown
Yellow
Yellow
LAMP 3
LAMP 4
CSA Certified
70°C Max Case Temp.
FCC 47CFR Part 18 Non-Consumer
Class A Sound Rating
RoHS Compliant3
NEMA Premium Electronic Ballast
Program compliant
ANSI C62.41 Cat A. Transient
GFCI compatible
Emergency ballast compatible
Remote Mounting (Max. wire length from
ballast case to lamp holder):
• 20 ft: full wattage T8s
• 10 ft: energy saving T8s
• 4 ft: 25W energy saving T8s
(keep blue wires short, ie. lamp(s)
attached to the blue leads to remain in the
fixture that houses the ballast).
2 Operation below 50ºF (10°C) may affect light
output or lamp operation – see “Low Temp.
Starting” definition.
3 Complies with European Union Restriction
of Hazardous Substances Directive (Directive
EC 2002/95)
System Life / Warranty
Height
8.70 mm
Slot
Width
51402 QTP 2 x 32T8 / UNV PSN TC
QUICKTRONIC products are covered by the
QUICK 60+® warranty, a comprehensive
lamp and ballast system warranty. For
additional details, refer to the QUICK 60+
warranty bulletin.
Mounting
Length
Length
Enclosure Type (TC or SC)
QUICKTRONIC PROFESSIONAL
Starting Type/Ballast Factor – PROStart/Normal BF
Number of Lamps (1, 2, 3, 4)
Line Voltage (120-277V)
OSRAM SYLVANIA
National Customer
Service and Sales Center
1-800-LIGHTBULB
(1-800-544-4828)
www.sylvania.com
Primary Lamp Type (F32T8)
Specifications subject to change without notice.
SYLVANIA,
the system solution, See the World in a New Light, OCTRON, PROStart, SUPERSAVER, XP and QUICK60+ are registered trademarks of OSRAM SYLVANIA Inc.
QUICKTRONIC is a registered trademark of OSRAM GmbH.
Page 95 of 103
©2011 OSRAM SYLVANIA
BALLAST
Blue
Blue
www.sylvania.com
QUICKTRONIC® PROStart® T8
High Ambient Temperature
Type CC, Lamp Striation Control
& Parallel Operation
High Ballast Factor
Q HE T8 PSH
High Efficiency Series
Lamp / Ballast Guide
Primary Systems
32W T8 - OCTRON®
2-lamp QHE2x32T8/UNV PSH-HT
3-lamp QHE3x32T8/UNV PSH-HT
4-lamp QHE4x32T8/UNV PSH-HT
Also operates:
FBO32, FBO31, FO30/SS (30W),
FO28/SS (28W), FO25/SS (25W),
FBO30/SS (30W), FBO29/SS (29W),
FO25, FBO24, FO17 & FBO16
Key System Features
• High Efficiency Systems over 90%
efficient
• NEMA Premium Ballast compliant
• PROStart Programmed Rapid Start
• Extends lamp life
• High ballast factor: 1.15
• Parallel operation, (one lamp out,
remaining lamps stay lit)
• 90°C maximum case temp.
• UL Type CC
• LSC (Lamp Striation Control)
• Universal input voltage (120-277V)
• Min. Starting Temp:
• 0°F/-18°C for T8 lamps
• 60°F/16°C for Energy Saving
T8 lamps
SYLVANIA QUICKTRONIC PROStart
programmed rapid start electronic T8
ballasts offer eight major advantages:
1. Operate 32W linear and U-bend equivalent T8 lamps at High Efficiency and high
ballast factor which increases light levels
while optimizing system performance.
2. Longer Lamp Life: System PSH,
(Programmed Start High Ballast Factor)
is the first SYLVANIA high ballast factor
model to extend lamp life which is ideal
for applications where long lamp life is
desired to reduce maintenance costs.
3. High Ambient Temperature: specifically
designed for those applications where
the ballast is subjected to higher
ambient temperatures, such as high
bays in industrial installations.
4. Parallel Circuitry: keeps remaining
lamps lit if one or more go out. First
SYLVANIA PROStart ballast to offer
parallel lamp operation.
5. Available in 2, 3 & 4-lamp models
which allows great flexibility for various
light levels in high bay applications to
replace HID or T12HO lighting systems.
6. NEMA Premium Ballast (NPB) program
compliant. The NPB program promotes
SYLVANIA QUICKTRONIC
PROStart T8 is ideally suited for:
• High bay
• Warehouses
• Applications where extended lamp life
is required to reduce maintenance
costs
• Areas where frequent switching is
desired
• Occupancy sensor usage
• Building control systems
• Areas that are underlit
38
8. Lamp Striation Control (LSC): T8
energy saving lamps should be
operated above 60°F, but under certain
conditions the lamps may striate. LSC
circuitry may minimize or eliminate this
condition; however there are limited
applications where LSC circuitry may
not entirely mitigate lamp striations.
(Please consult lamp manufacturers for
additional details.)
Input
Power
(W)
Initial
LPW
Mean
Fixture*
Lumens
Relative
Fixture*
Output
%
Energy
Savings
%
Lamp
Life
@3hrs/
start
M400/U
Magnetic Ballast
452
61
17,784
Baseline
Baseline
Baseline
3-F96T12HO
Magnetic Ballast
360
58
16,875
95%
20%
60%
6-FO32/800/XPS
2-QHE3x32 PSH
220
83
17,090
96%
51%
180%
System Information
SYLVANIA QUICKTRONIC High Efficiency
(QHE) System advantages:
• Operate from 120V through 277V
• Eliminates “wrong voltage” errors
• Reduces inventory by 50%
Application Information
the use of high efficiency T8 electronic
ballasts by meeting or exceeding the
Ballast Efficiency Factors, (BEF) established by the CEE, (Consortium for
Energy Efficiency). For additional information on this program go to:
www.cee1.org or www.nema.org
7. UL Type CC compliant: ballasts utilize a
micro-controller based circuit to reduce
arcing caused by loose connections or
improper lamp pin to socket connections.
• Utilizes Programmed Rapid Start
operation for:
• Highest System Efficacy
• Longer Life
• Over 100,000 switching cycles for
occupancy sensor and building control
systems applications.
Lamp &
Ballast Type
*Based on Fixture Efficiency: 76% for M400/U and 85% for T12HO and FO32T8 lamps.
200%
180%
% Relative Fixture* Light Output
% System Wattage
% Lamp Life
180%
160%
140%
• Operate at >42Hz to reduce potential
interference with infrared control
systems
20%
Energy
Savings
120%
100% 100% 100%
100%
51%
Energy
Savings
96%
95%
80%
80%
60%
60%
49%
40%
20%
0%
M400/U
Mag. Ballast
3-F96T12HO
Mag. Ballast
6-FO32/800/XPS
2-QHE3x32 PSH
Page 96 of 103
High Ballast Factor
SPECIFICATION DATA
Catalog #
Date
Type
Project
Prepared by
T8 PROStart
®
High Efficiency
Comments
Performance Guide
High Efficiency Type CC, Lamp Striation Control & High Ambient (120-277V)
Item
Number
Input
Current
(AMPS)
OSRAM SYLVANIA
Description
QHE2x32T8/UNV-PSH-HT
49459
Banded Pack
Pallet Pack
QHE3x32T8/UNV-PSH-HT
49453
49460
Banded Pack
Pallet Pack
QHE4x32T8/UNV-PSH-HT
49455
49470
Banded Pack
Pallet Pack
Lamp
Type
Rated
Ballast
Lumens No. of Factor System Mean
(lm)
Lamps
(BF) Lumens Lumens
Input
Power
(W)
System
Efficacy
(lm/W)
BEF 1
72/70
72/70
69/67
63/62
56/55
55
38
89/92
96/99
95/98
100/101
102/104
92
85
1.64
1.64
1.72
1.85
2.09
2.11
3.08
0.60/0.27 FO32/700
0.60/0.27 FO32/XP
0.57/0.25 FO30/SS
0.53/0.23 FO28/SS
0.47/0.20 FO25/SS
0.46/0.20 FO25/XP
0.32/0.14 FO17/XP
2800
3000
2850
2725
2475
2175
1375
2
2
2
2
2
2
2
1.15
1.15
1.15
1.15
1.15
1.16
1.17
6440
6900
6555
6270
5695
5045
3220
5795
6485
6160
5890
5350
4740
3025
0.94/0.40 FO32/700
0.94/0.40 FO32/XP
0.88/0.37 FO30/SS
0.81/0.34 FO28/SS
0.72/0.31 FO25/SS
0.70/0.30 FO25/XP
0.48/0.21 FO17/XP
2800
3000
2850
2725
2475
2175
1375
3
3
3
3
3
3
3
1.15
1.15
1.15
1.15
1.15
1.17
1.18
9660
10,350
9835
9400
8540
7635
4870
8695
9730
9245
8835
8025
7175
4575
110/108 88/89
110/108 94/96
104/101 95/97
95/93
99/101
85/84 100/102
83/82
92/93
56
87
1.06
1.06
1.14
1.24
1.37
1.43
2.11
1.22/0.53 FO32/700
1.22/0.53 FO32/XP
1.13/0.49 FO30/SS
1.06/0.46 FO28/SS
0.95/0.41 FO25/SS
0.91/0.40 FO25/XP
0.63/0.28 FO17/XP
2800
3000
2850
2725
2475
2175
1375
4
4
4
4
4
4
4
1.15
1.15
1.15
1.15
1.15
1.17
1.18
12,880
13,800
13,110
12,535
11,385
10,180
6490
11,590
12,970
12,325
11,785
10,700
9570
6100
143/141 90/91
143/141 97/98
132/130 99/101
124/123 101/102
112/110 102/104
107/106 95/96
73
89
0.82
0.82
0.88
0.93
1.05
1.10
1.62
Banded pack contains 10 pieces, (add “-B” to Description). Pallet Pack contains 500 pieces, (add “-PAL” to Description).
1: Ballast Efficiency Factor (BEF) shown = (Ballast Factor x 100) divided by Input Power (Note: calculation based on lowest wattage value).
2 lamp
Black
White
Yellow
Yellow
BALLAST
Blue
Blue
Red
Red
3 lamp
Black
White
Yellow
Yellow
Red
Blue
Blue
Blue/White
Blue/White
LAMP
LAMP
LAMP
LAMP
LAMP
QUICKTRONIC 2x32
QUICKTRONIC 3x32
4 lamp
Yellow
Yellow
Black
White
BALLAST
QHE PROStart ballasts will also operate
F17 & F25, SUPERSAVER & U-Bend
equivalent T8 lamps.
Specifications
Data based on F32T8
Starting Method: Programmed
Rapid-Start
Ballast Factor: 1.15
Circuit Type: Parallel
Lamp Frequency: >40 kHz
Lamp CCF: Less than 1.7
Starting Temp:2
0°F (-18°C) for OCTRON T8 lamps;
60°F (16°C) for SUPERSAVER® T8 lamps
Input Frequency: 50/60 Hz
THD: <10%
Power Factor: >98%
Voltage Range: ±10% of 120-277V
rated line (108-305V)
NEW!
UL Listed Class P, Type 1 Outdoor
UL Type CC Rated
Lamp Striation Control (LSC)
CSA Certified
High Ambient Applications:
90°C Max. Case Temp. (3 yr. warranty)
Standard Ambient Applications:
70°C Max. Case Temp. (5 yr. warranty)
FCC 47CFR Part 18 Non-Consumer
Class A Sound Rating
ANSI C62.41 Cat A. Transient Protection
GFCI compatible
Emergency ballast compatible
Remote Mounting (Max. wire length
from ballast case to lampholder):
• 20 ft: full wattage T8s
• 10 ft: energy saving T8s
• 4 ft: 25W energy saving T8s
Red
BALLAST
Data based upon SYLVANIA OCTRON®
lamps shown. QUICKTRONIC® QHE
PROStart ballasts are also compatible
with other lamp manufacturers equivalent
lamp types that meet ANSI specifications.
Q HE T8 PSH
49450
PSH
Blue/White
Blue/White
Red
Red
Red/White
Red/White
Blue
Blue
LAMP
LAMP
LAMP
2 Operation below 50ºF (10°C) may affect light
output or lamp operation – see “Low Temp.
Starting” definition.
LAMP
QUICKTRONIC 4x32
Dimensions 2 & 3-lamp:
Overall: 9.5" L x 2.38" W x 1.6" H
Mounting: 8.90"
Weight: 1.6 lbs each (approx.)
System Life / Warranty
Dimensions 4-lamp:
Overall: 11.75" L x 2.38" W x 1.6" H
Mounting: 11.13"
Weight: 2.9 lbs each (approx.)
Height
Mounting
Length
Height
Mounting
Length
Length
Length
Width
Width
Item Number
49450 QHE 2 x 32T8 / UNV PSH HT
High Case Temp. Rating
QUICKTRONIC High Efficiency
Starting Type/Ballast Factor
Number of Lamps (2, 3, 4)
Line Voltage (120-277V)
Primary Lamp Wattage
Specifications subject to change without notice.
QUICKTRONIC products are covered by
our QUICK 60+® warranty, a comprehensive lamp and ballast system
warranty. For additional details, refer
to our QUICK 60+ warranty bulletin.
OSRAM SYLVANIA
National Customer
Service and Sales Center
1-800-LIGHTBULB
(1-800-544-4828)
www.sylvania.com
Page 97 of 103
39
D-Series Size 1
Catalog
Number
LED Area Luminaire
DSX1 LED 30C 1000 40K 3TM MV
Notes
Type
AL1
Hit the Tab key or mouse over the page to see all interactive elements.
Introduction
The modern styling of the D-Series is striking
yet unobtrusive - making a bold, progressive
statement even as it blends seamlessly with its
environment.
Specifications
The D-Series distills the benefits of the latest in
LED technology into a high performance, high
efficacy, long-life luminaire. The outstanding
photometric performance results in sites with
excellent uniformity, greater pole spacing and
lower power density. It is ideal for replacing 100 –
400W metal halide in pedestrian and area lighting
applications with typical energy savings of 65%
and expected service life of over 100,000 hours.
1.2 ft2
EPA:
(0.11 m2)
W
W
33”
Length:
W
(83.8 cm)
13”
Width:
(33.0 cm)
L
L
L
7-1/2”
Height:
(19.0 cm)
Weight
(max):
H
H
H
27 lbs
(12.2 kg)
Ordering Information
EXAMPLE: DSX1 LED 60C 1000 40K T3M MVOLT SPA DDBXD
DSX1 LED
Series
LEDs
DSX1 LED
Drive current
30C 30 LEDs
(one
engine)
40C 40 LEDs
(two
engines)
60C 60 LEDs
(two
engines)
530 530 mA
700 700 mA
1000 1000 mA
(1 A)
Color
temperature
Distribution
30K 3000K
(80
CRI
min.)
40K 4000K
(70
CRI
min.)1
50K 5000K
(67
CRI)
Voltage
MVOLT 2
120 2
208 2
240 2
277 2
347
4803
T1S
T2S
T2M
T3S
T3M
T4M
TFTM
Type I short
Type II short
Type II medium
Type III short
Type III medium
Type IV medium
Forward throw
medium
T5VS Type V very
short
T5S Type V short
T5M Type V medium
T5W Type V wide
Mounting
Control options
Shipped
included
SPA Square
pole
mounting
RPA Round
pole
mounting
WBA Wall
bracket
Shipped installed
PER NEMA twist-lock receptacle
only (no controls)
DMG 0-10V dimming driver (no
controls) 4
DCR Dimmable and controllable
via ROAM® (no controls) 5
DS
Dual switching 6,7
PIR Motion sensor, 8-15’
mounting height 8
PIRH Motion sensor, 15-30’
mounting height 9
BL30 Switched dimming, 30%7.10
BL50 Switched dimming, 50%7,10
Accessories
Ordered and shipped separately.
Drilling
Top of Pole
Template #8
0.563”
1.325”
0.400”
(2 PLCS)
2.650”
DLL127F 1.5 JU
Photocell - SSL twist-lock (120-277V) 15
DLL347F 1.5 CUL JU
Photocell - SSL twist-lock (347V)
DLL480F 1.5 CUL JU
Photocell - SSL twist-lock (480V) 15
SC U
Shorting cap 15
DSX1HS 30C U
House-side shield for 30 LED unit
DSX1HS 40C U
House-side shield for 40 LED unit
15
DSX1HS 60C U
House-side shield for 60 LED unit
SPA19/MR2 DDBXD U
Square pole DM19 to DM19AS adapter
(specify finish)
RPA19/MR2 DDBXD U
Round pole DM19 to DM19AS adapter
(specify finish)
For more control options, visit DTL and ROAM online.
DSX1 shares a unique drilling pattern with the AERIS™ family. Specify this
drilling pattern when specifying poles, per the table below.
DM19AS
DM28AS
DM49AS
Single unit 2 at 180° 4 at 90°
DM29AS
DM39AS
DM32AS
2 at 90°
3 at 90°
3 at 120° *
Example: SSA 20 4C DM19AS DDBXD
Visit Lithonia Lighting’s POLES CENTRAL to see our wide selection of
poles, accessories and educational tools.
Tenon Mounting Slipfitter *
Tenon O.D. Single Unit 2 at 180°
2-3/8”
2 at 90°
3 at 120°
3 at 90°
4 at 90°
AST20-190 AST20-280 AST20-290 AST20-320 AST20-390 AST20-490
2-7/8”
AST25-190 AST25-280 AST25-290 AST25-320 AST25-390 AST25-490
4”
AST35-190 AST35-280 AST35-290 AST35-320 AST35-390 AST35-490
* For round pole mounting (RPA) only.
Other options
Shipped installed
HS House-side
shield11
WTB Utility terminal
block12
SF
Single fuse
(120, 277, 347V)13
DF Double fuse
(208, 240, 480V)13
TLS Tool-less entry
trigger latch
L90 Left rotated
optics14
R90 Right rotated
optics14
Finish (required)
DDBXD
DBLXD
DNAXD
Dark bronze
Black
Natural
aluminum
DWHXD White
DDBTXD Textured
dark bronze
DBLBXD Textured
black
DNATXD Textured
natural
aluminum
DWHGXD Textured
white
NOTES
1 Configured with 4000K (40K) provides the shortest lead times. Consult
factory for 3000K (30K) and 5000K (50K) lead times.
2 MVOLT driver operates on any line voltage from 120-277V (50/60 Hz). Specify
120, 208, 240 or 277 options only when ordering with fusing (SF, DF options).
3 Not available with single board, 530mA product (30C 530).
4 Not available with 347 or 480V.
5 Specifies a ROAM® enabled luminaire with 0-10V dimming capability; PER
option required. Not available with 347 or 480V. Additional hardware and
services required for ROAM® deployment; must be purchased separately.
Call 1-800-442-6745 or email: [email protected] Not available with
PIRH.
6 Requires 40C or 60C. Provides 50/50 luminaire operation via two
independent drivers on two separate circuits. N/A with PER, DCR, DMG or
WTB.
7 Requires an additional switched line.
8 Specifies the SensorSwitch SBR-10-ODP control; see Motion Sensor Guide
for details. Dimming driver standard. Not available with DCR or WTB.
9 Specifies the SensorSwitch SBR-6-ODP control; see Motion Sensor Guide for
details. Dimming driver standard. Not available with DCR or WTB.
10 Dimming driver standard. MVOLT only. Not available with DCR or WTB.
11 Also available as a separate accessory; see Accessories information.
12 WTB not available with BL30, BL50, DS, PIR or PIRH.
13 Single fuse (SF) requires 120, 277 or 347 voltage option. Double fuse (DF)
requires 208, 240 or 480 voltage option.
14 Available with 60 LEDs (60C option) only.
15 Requires luminaire to be specified with PER option. Ordered and shipped as
a separate line item.
One Lithonia Way • Conyers, Georgia 30012 • Phone: 800.279.8041 • Fax: 770.918.1209 • www.lithonia.com
© 2011-2013 Acuity Brands Lighting, Inc. All rights reserved.
Page 98 of 103
Performance Data
Lumen Output
Lumen values are from photometric tests performed in accordance with IESNA LM-79-08. Data is considered to be representative of the configurations shown, within the tolerances
allowed by Lighting Facts. Actual wattage may differ by +/- 8% when operating between 120-480V +/-10%. Contact factory for performance data on any configurations not shown here.
LEDs
Drive Current
(mA)
Performance
Package
System
Watts
700 mA
30C 700 --K
68 W
1000 mA
30C 1000 --K
105 W
700 mA
40C 700 --K
89 W
1000 mA
40C 1000 --K
138 W
700 mA
60C 700 --K
131 W
1000 mA
60C 1000 --K
209 W
30C
(30 LEDs)
40C
(40 LEDs)
60C
(60 LEDs)
Dist.
Type
T1S
T2S
T2M
T3S
T3M
T4M
TFTM
T5VS
T5S
T5M
T5W
T1S
T2S
T2M
T3S
T3M
T4M
TFTM
T5VS
T5S
T5M
T5W
T1S
T2S
T2M
T3S
T3M
T4M
TFTM
T5VS
T5S
T5M
T5W
T1S
T2S
T2M
T3S
T3M
T4M
TFTM
T5VS
T5S
T5M
T5W
T1S
T2S
T2M
T3S
T3M
T4M
TFTM
T5VS
T5S
T5M
T5W
T1S
T2S
T2M
T3S
T3M
T4M
TFTM
T5VS
T5S
T5M
T5W
30K
(3000K, 80 minimum CRI)
40K
(4000K, 70 minimum CRI)
50K
(5000K, 67 CRI)
Lumens
B
U
G
LPW
Lumens
B
U
G
LPW
Lumens
B
U
G
LPW
5,290
5,540
5,360
5,479
5,452
5,461
5,378
5,708
5,639
5,710
5,551
7,229
7,572
7,325
7,488
7,451
7,464
7,351
7,801
7,803
7,707
7,586
6,876
7,202
6,968
7,122
7,088
7,100
6,992
7,421
7,331
7,423
7,216
9,521
9,972
9,648
9,862
9,814
9,831
9,681
10,275
10,150
10,278
9,991
10,226
10,711
10,363
10,592
10,541
10,559
10,398
11,036
10,902
11,039
10,732
14,017
14,681
14,204
14,518
14,448
14,473
14,253
15,127
14,943
15,131
14,710
1
1
1
1
1
1
1
2
2
3
3
2
2
2
2
2
2
1
3
3
3
3
2
2
2
2
2
2
1
3
2
3
3
2
2
2
2
2
2
2
3
3
4
4
2
2
2
2
2
2
2
3
3
4
4
3
3
3
3
3
3
2
4
4
4
4
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
2
1
2
2
2
0
0
1
1
2
2
2
2
2
2
2
1
2
0
2
2
2
2
2
2
2
2
0
0
2
2
2
2
3
2
2
2
2
1
1
2
2
2
2
3
2
2
2
3
1
1
2
2
3
3
3
3
3
3
3
1
1
2
2
78
81
79
81
80
80
79
84
83
84
82
69
72
70
71
71
71
70
74
74
73
72
77
81
78
80
80
80
79
83
82
83
81
69
72
70
71
71
71
70
74
74
74
72
78
82
79
81
80
81
79
84
83
84
82
67
70
68
69
69
69
68
72
71
72
70
6,524
6,833
6,611
6,757
6,724
6,736
6,633
7,040
6,955
7,042
6,847
9,168
9,603
9,291
9,496
9,450
9,467
9,323
9,894
9,774
9,897
9,621
8,639
9,049
8,755
8,948
8,905
8,920
8,785
9,323
9,210
9,326
9,066
11,970
12,558
12,149
12,418
12,358
12,379
12,191
12,937
12,782
12,942
12,582
12,871
13,481
13,043
13,331
13,267
13,290
13,087
13,890
13,721
13,894
13,507
17,632
18,467
17,867
18,262
18,173
18,205
17,928
19,028
18,797
19,033
18,503
2
2
2
1
2
2
1
3
2
3
3
2
2
2
2
2
2
2
3
3
3
4
2
2
2
2
2
2
2
3
3
3
4
2
3
3
2
3
2
2
3
3
4
4
3
3
3
2
3
2
2
4
3
4
4
3
3
3
3
3
3
3
4
4
4
5
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
2
2
2
2
2
2
2
0
0
1
2
2
2
2
2
2
2
2
1
1
2
2
2
2
2
2
2
2
2
1
1
2
2
2
3
3
2
3
3
3
1
1
2
2
3
3
3
2
3
3
3
4
1
2
2
3
3
3
3
4
3
4
1
1
2
3
96
100
97
99
99
99
98
104
102
104
101
87
91
88
90
90
90
89
94
93
94
92
97
102
98
101
100
100
99
105
103
105
102
87
91
88
90
90
90
88
94
93
94
91
98
103
100
102
101
101
100
106
105
106
103
84
88
85
87
87
87
86
91
90
91
89
7,053
7,387
7,147
7,305
7,269
7,282
7,171
7,611
7,519
7,613
7,401
9,874
10,342
10,005
10,227
10,177
10,195
10,040
10,655
10,526
10,658
10,363
9,345
9,788
9,469
9,679
9,632
9,649
9,502
10,085
9,962
10,087
9,807
12,871
13,481
13,043
13,331
13,267
13,290
13,087
13,890
13,721
13,894
13,507
13,929
14,589
14,115
14,427
14,357
14,382
14,163
15,032
14,849
15,036
14,617
19,007
19,908
19,260
19,687
19,591
19,625
19,326
20,512
20,263
20,517
19,946
2
2
2
2
2
2
1
3
3
3
3
2
2
2
2
2
2
2
3
3
4
4
2
2
2
2
2
2
2
3
3
4
4
3
3
3
2
3
2
2
4
3
4
4
3
3
3
3
3
3
2
4
4
4
4
3
3
3
3
3
3
3
4
4
5
5
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
3
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
2
2
2
2
2
2
2
1
0
2
2
2
2
3
2
2
2
3
1
1
2
2
2
2
3
2
2
2
2
1
1
2
2
0
3
3
2
3
3
3
1
1
2
2
3
3
3
3
3
3
3
1
1
2
2
3
3
3
3
4
4
4
1
1
3
3
104
109
105
107
107
107
105
112
111
112
109
94
98
95
97
97
97
96
101
100
102
99
105
110
106
109
108
108
107
113
112
113
110
93
98
95
97
96
96
95
101
99
101
98
106
111
108
110
110
110
108
115
113
115
112
91
95
92
94
94
94
92
98
97
98
95
One Lithonia Way • Conyers, Georgia 30012 • Phone: 800.279.8041 • Fax: 770.918.1209 • www.lithonia.com
© 2011-2013 Acuity Brands Lighting, Inc. All rights reserved.
DSX1-LED
Rev. 06/10/13
Page 99 of 103
Performance Data
Electrical Load
Lumen Ambient Temperature (LAT) Multipliers
Use these factors to determine relative lumen output for average ambient temperatures
from 0-40°C (32-104°F).
Ambient
Current (A)
Lumen Multiplier
0°C
32°F
1.02
10°C
50°F
1.01
20°C
68°F
1.00
25°C
77°F
1.00
30°C
86°F
1.00
40°C
104°F
0.99
Number
of LEDs
Drive Current
(mA)
System
Watts
120
208
240
277
347
480
30
530
700
1000
52
68
105
0.52
0.68
1.03
0.30
0.39
0.59
0.26
0.34
0.51
0.23
0.30
0.45
0.18
0.24
0.36
-0.17
0.26
40
530
700
1000
68
89
138
0.67
0.89
1.35
0.39
0.51
0.78
0.34
0.44
0.67
0.29
0.38
0.58
0.23
0.31
0.47
0.17
0.22
0.34
60
530
700
1000
99
131
209
0.97
1.29
1.98
0.56
0.74
1.14
0.48
0.65
0.99
0.42
0.56
0.86
0.34
0.45
0.69
0.24
0.32
0.50
Projected LED Lumen Maintenance
Data references the extrapolated performance projections for the platforms noted in a
25°C ambient, based on 10,000 hours of LED testing (tested per IESNA LM-80-08 and
projected per IESNA TM-21-11).
To calculate LLF, use the lumen maintenance factor that corresponds to the desired number
of operating hours below. For other lumen maintenance values, contact factory.
Operating Hours
0
25,000
50,000
100,000
DSX1 LED 60C 1000
1.0
Lumen Maintenance
Factor
0.95
0.93
0.88
DSX1 LED 60C 700
1.0
0.99
0.98
Photometric Diagrams
0.96
To see complete photometric reports or download .ies files for this product, visit Lithonia Lighting’s D-Series Area Size 1 homepage.
1
0
1
2
3
4
0.1 fc
3
0.5 fc
2
1.0 fc
1
0
-1
-2
-3
-4
T1S
4
3
2
1
0
1
2
3
4
4
3
2
1
0
-1
-2
-3
-4
T3M
4
3
2
1
0
1
2
3
4
4
3
2
1
0
-1
-2
-3
-4
T4M
4
3
2
1
0
1
2
3
4
4
3
2
1
0
-1
-2
-3
T5W
-4
Test No. LTL23271 tested in accordance with
IESNA LM-79-08.
2
Test No. LTL23222 tested in accordance with
IESNA LM-79-08.
3
Test No. LTL23164B tested in accordance with
IESNA LM-79-08.
4
4
Test No. LTL23211 tested in accordance with
IESNA LM-79-08.
Isofootcandle plots for the DSX1 LED 60C 1000 40K. Distances are in units of mounting height (20’).
LEGEND
FEATURES & SPECIFICATIONS
INTENDED USE
The sleek design of the D-Series Size 1 reflects the embedded high performance LED technology. It
is ideal for many commercial and municipal applications, such as parking lots, plazas, campuses, and
streetscapes.
CONSTRUCTION
Single-piece die-cast aluminum housing has integral heat sink fins to optimize thermal management
through conductive and convective cooling. Modular design allows for ease of maintenance and
future light engine upgrades. The LED driver is mounted in direct contact with the casting to
promote low operating temperature and long life. Housing is completely sealed against moisture
and environmental contaminants (IP65). Low EPA (1.2 ft2) for optimized pole wind loading.
FINISH
Exterior parts are protected by a zinc-infused Super Durable TGIC thermoset powder coat finish
that provides superior resistance to corrosion and weathering. A tightly controlled multi-stage
process ensures a minimum 3 mils thickness for a finish that can withstand extreme climate
changes without cracking or peeling. Available in both textured and non-textured finishes.
OPTICS
Precision-molded proprietary acrylic lenses are engineered for superior area lighting distribution,
uniformity, and pole spacing. Light engines are available in standard 4000K (70 minimum CRI) or
optional 3000K (80 minimum CRI) or 5000K (67 CRI) configurations. The D-Series Size 1 has zero
uplight and qualifies as a Nighttime FriendlyTM product, meaning it is consistent with the LEED®
and Green GlobesTM criteria for eliminating wasteful uplight.
ELECTRICAL
Light engine configurations consist of 30, 40 or 60 high-efficacy LEDs mounted to metal-core
circuit boards to maximize heat dissipation and promote long life (up to L96/100,000 hours at
25°C). Class 1 electronic drivers are designed to have a power factor >90%, THD <20%, and
an expected life of 100,000 hours with <1% failure rate. Easily serviceable 10kV or 6kV surge
protection device meets a minimum Category C Low operation (per ANSI/IEEE C62.41.2).
INSTALLATION
Included mounting block and integral arm facilitate quick and easy installation. Stainless
steel bolts fasten the mounting block securely to poles and walls, enabling the D-Series Size 1
to withstand up to a 3.0 G vibration load rating per ANSI C136.31. The D-Series Size 1 utilizes
the AERISTM series pole drilling pattern. Optional terminal block, tool-less entry, and NEMA
photocontrol receptacle are also available.
LISTINGS
CSA certified to U.S. and Canadian standards. Light engines are IP66 rated; luminaire is IP65
rated. Rated for -40°C minimum ambient. U.S. Patent No. D672,492 S. International patent
pending.
WARRANTY
Five-year limited warranty. Full warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Note: Specifications subject to change without notice.
One Lithonia Way • Conyers, Georgia 30012 • Phone: 800.279.8041 • Fax: 770.918.1209 • www.lithonia.com
© 2011-2013 Acuity Brands Lighting, Inc. All rights reserved.
DSX1-LED
Rev. 06/10/13
Page 100 of 103
Appendix D
Budget Breakout
Page 10
Page 101 of 103
PacifiCorp Power Plant Projects Fixture Schedule
Fixture
Type
AL1
BNLO1
BNLO2
BHLO1
BHLO2
DBNLO1
EHB3
FL4
FL5
HB1
HB6
L1
L2
RLB1
RLB3
RW1
SK2
WP1
WP2
T8-17W
CFL-25
CFL-15
LED-30
LED-14
IC
W-OCC
Manufacturer
Lithonia
Osram Sylvania
Osram Sylvania
Osram Sylvania
Osram Sylvania
Osram Sylvania
Lithonia
Crouse Hinds
Crouse Hinds
Lithonia
Lithonia
Osram Sylvania
Osram Sylvania
Crouse Hinds
Crouse Hinds
Cree
Lithonia
Lithonia
Lithonia
Catalog Number
DSX1 LED 30C 1000 40K T3M MVOLT SPA DDBXD
QTP2x32T8/UNV PSN-TC # 51402
QTP4x32T8/UNV PSN-SC # 51404
QHE 2x32T8/UNV PSH-HT # 49450
QHE 4x32T8/UNV PSH-HT # 49455
QTP2x32T8/UNV DIM-TC
FHE 632L
PFM9L CY/UNV1 76
PFM13L CY/UNV1 76
IBL 18L WD LP740 DLC
IBL 48L WD LP740 DLC
FO32/841/XPS/ECO3 # 21681
FO28/841/XP/XL/ECO3 # 22167
PVM7LDM2/UNV1
PVM3LDM2/UNV1
STR-LWY 2M AA 07 E UL SV 525 IP
AVRK8 2 32 CW42 1/4 BINP WHR
DSXW1 LED 20C 700 40K T3M MVOLT DDBXD
DSXW2 LED 30C 1000 40K T3M MVOLT DDBXD
Description
105w LED area light - type III
2L program start NLO Ballast
4L program start NLO Ballast
2L program start HLO Ballast
4L program start HLO Ballast
2L prog. st. NLO Dimming Ballast
6L HPT8 enclosed high bay
121w LED flood light
179w LED flood light
213w LED high bay
515w LED high bay
21681 HPT8 lamp 32w
22167 HPT8 lamp 28w
78W Retrofit low bay-Indust
46W Retrofit low bay-Indust
120w LED roadway
HPT8 strip kit with reflector
47w LED wall pack
109w LED wall pack
2 foot linear T8 17W 2'x2' kit (FLT8-17W x 3L x 2'-IS(E) L)
25W compact fluorescent-screw-in (FCM-25W-MG)
15W compact fluorescent screw-in (FCM-15W x 2L-MG)
30W screw-in LED (CUST: LEDSI-30W)
14W screw-in LED (CUST: LEDSI-14W)
integral occupancy sensor
Wireless occupancy sensor
Page 102 of 103
Lighting Calculator Code
Fixture
Type
Description
FLT8CEE-28W x 2L X 4'-CEE
BNLO1 & L2 2L PRS NLO
RS/PRS CEE N
FLT8CEE-32W x 2L X 4'-CEE
BHLO1 & L1 2L IS HLO
IS CEE H
FLT8CEE-28W x 4L X 4'-CEE
BNLO2 & L2 4L PRS NLO
RS/PRS CEE N
2 Lamp CFL 15W
FCM-15W x 2L-MG
CFL-15
each
FLT8CEEHB-32W x 4L X 4'BHLO2 & L1 4L IS HLO
CEE IS CEE H
FLT8CEEHB-32W x 6L X 4'EHB3 & L1
6L IS HLO
CEE IS CEE H
FCM-25W-MG
CFL-25
25W CFL
FLT8-17W x 3L x 2'-IS(E) L
T8-17W
CUST: LEDHB-78W
RLB1
CUST: LEDPM-40W
RLB3
CUST: LEDSI-30W
LED-30
CUST: LEDSI-14W
LED-14
CUST: LEDHB-511W
HB6
CUST: LEDHB-160W
HB1
CUST: LEDWP-109W
WP2
CUST: LEDWP-47W
WP1
CUST: LEDPM-120W
RW1
CUST: FLT8CEE-28W x 2L X DBNLO1 &
L2
4'-CEE RS/PRSDIM N
CUST: LED Flood 121w
FL4
CUST: LEDWP-40W
WP1
CUST: LED Flood 179w
FL5
CUST: LEDPM-105W
AL1
Integral controls
Occupancy controls
Qty
lamp/
total
ballast measure
lamp/
fix.
lamp/
/ fix
cost (no
fix cost
qty
fix cost
cost mark-up)
Distributor
Net Cost
Mark up
(%)
(no markup)
Marked
Up
Total
(per
unit)
Measure
total
Unit
Total Labor
Other Costs/
Labor rate
($)
Contingency ($)
($)
963
2
$6
$13
$20
$33
$32,155
122%
$41
$39,229
$
40
$
38,520
$
1,000
1
2
$5
$9
$22
$31
$31
125%
$39
$39
$
40
$
40
$
-
95
4
$6
$26
$19
$45
$4,281
122%
$55
$5,222
$
40
$
3,800
$
-
1
2
$8
$16
$10
$26
$26
125%
$33
$33
$
20
$
20
$
-
9
4
$5
$19
$10
$29
$258
125%
$36
$322
$
80
$
720
$
500
109
6
$5
$28
$186
$214
$23,327
122%
$261
$28,459
$
80
$
8,720
$
500
2
1
$15
$15
$15
$30
125%
$19
$38
$
10
$
20
$
-
25
2
$6
$12
$87
$2,175
125%
$109
$2,719
$
80
$
2,000
$
-
2736
1
$618
$618
$618
$1,690,848
120%
$742
$2,029,018
$
80
$
218,880
$
10,000
3
1
$618
$618
$618
$1,854
120%
$742
$2,225
$
80
$
240
$
500
131
1
$30
$30
$30
$3,930
125%
$38
$4,913
$
20
$
2,620
$
-
85
1
$25
$25
$25
$2,125
125%
$31
$2,656
$
20
$
1,700
$
-
136
1
$600
$600
$600
$81,600
120%
$720
$97,920
$
120
$
16,320
$
2,000
36
1
$347
$347
$347
$12,474
122%
$423
$15,218
$
120
$
4,320
$
500
38
1
$420
$420
$420
$15,960
122%
$512
$19,471
$
80
$
3,040
$
-
20
1
$325
$325
$325
$6,500
122%
$397
$7,930
$
80
$
1,600
$
-
11
1
$809
$809
$809
$8,899
120%
$971
$10,679
$
120
$
1,320
$
500
2L PRS NLO DIM
13
2
$5
$9
$68
$888
125%
$85
$1,110
$
80
$
1,040
$
-
121w LED Flood
40w LED wall
pack
179w LED Flood
105w LED
pendant
ordered with
fixture
Wireless
41
1
$820
$820
$820
$33,620
120%
$984
$40,344
$
80
$
3,280
$
-
3
1
$325
$325
$325
$975
122%
$397
$1,190
$
80
$
240
$
-
2L 2x2 F17W T8
78w LED high
bay
40w LED
pendant
30w LED screw
in
14w LED screw
in
511w LED high
bay
160w LED high
bay
109w LED wall
pack
47w LED wall
pack
120w LED
pendant
$75
$59
34
1
$1,057
$1,057
$1,057
$35,938
120%
$1,268
$43,126
$
80
$
2,720
$
1,000
15
1
$620
$620
$620
$9,300
120%
$744
$11,160
$
80
$
1,200
$
500
56
1
$60
$60
$60
$3,360
122%
$73
$4,099
$
20
$
1,120
$
-
87
1
$85
$85
$85
$7,395
122%
$104
$9,022
$
60
$
5,220
$
-
* Contingency and other costs include lifts, scaffolding, or other misc. materials/spares.
$1,886,472
DNC
material price shown in lighting tool (rounded)
$2,376,140
with markup
$ 318,700
Labor total
$
17,000
Other total
$2,376,100
Rounded $ 318,700
Labor
$
17,000
Grand Total all phases all bugetted costs = $ 2,711,800
Page 103 of 103
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement