V600 User Manual

V600 User Manual

- 1 -

Chapter 1 Introduction .......................................................................................................... - 4 -

Chapter 2 Installation ............................................................................................................ - 4 -

2.1 Extrinsic feature ...................................................................................................... - 4 -

2.2 Sim card and Micro SD card installation ................................................................. - 6 -

2.3 Power connection ................................................................................................... - 7 -

2.4 Power Button .......................................................................................................... - 7 -

Chapter 3 Data Acquisition ................................................................................................... - 8 -

3.1 RFID ......................................................................................................................... - 8 -

3.1.1 14443A ......................................................................................................... - 8 -

3.1.2 14443B ......................................................................................................... - 9 -

3.2 Fingerprint ............................................................................................................. - 10 -

3.3 Camera .................................................................................................................. - 11 -

3.3.1 Front Camera.............................................................................................. - 11 -

3.3.2 External Camera ......................................................................................... - 12 -

3.4 OBD ....................................................................................................................... - 16 -

Chapter 4 Network Communication .............................................................................. - 17 -

4.1 Phone .................................................................................................................... - 17 -

4.1.1 Phone Call ................................................................................................... - 17 -

4.1.2 Contacts ..................................................................................................... - 18 -

4.1.3 Messaging .................................................................................................. - 19 -

- 2 -

4.2 GPS ........................................................................................................................ - 20 -

4.3 Bluetooth .............................................................................................................. - 22 -

Chapter 5 ............................................................................................................................. - 22 -

5.1 PING ...................................................................................................................... - 22 -

5.2Volume Settings ..................................................................................................... - 23 -

5.3 Sensor .................................................................................................................... - 24 -

5.4 Keyboard ............................................................................................................... - 25 -

5.5 Network ................................................................................................................. - 26 -

- 3 -

Chapter 1 Introduction

Chainway V600 is a fixed vehicle computer with superior and reliable performance.

Featuring 4G LTE network, 2.4G & 5G dual-band Wi-Fi, ultrafast quadcore processor, GPS & BDS, two-channel external camera,5MP autofocus camera, fingerprint and face recognition, OBD data collection, Bluetooth 4.0 as well as biometrics, supporting calls, SMS, voice and recording functions, it can fully realize the overall management of driving school vehicles, school buses, taxis, buses, trucks, etc, effectively ensuring traffic safety.

Chapter 2 Installation

2.1 Extrinsic feature

V600 Extrinsic feature and interface are showed as below:

Front：

Back：

- 4 -

Top：

Bottom：

- 5 -

Right ：

2.2 Sim card and Micro SD card installation

- 6 -

Refer to top picture in 2.1, SIM card and Micro SD card slot is on the right side above. SIM card slot need to be opened by

niddle.

2.3 Power connection

Refer to right picture in 2.1, connect one end to

V600 device ,the other end to vehicle to supply power.

Attention: Under development stage, the power cable can be connected to the DC adapter to supply power, please pay attention to VCC and GND connection difference via the sign on the cable.

Red to VCC, Black to GND.

2.4 Power Button

Refer to right picture 2.1, long press the power button for 3s to power on and off the device. Short press the power button to get the device into and out of sleep mode.

- 7 -

Chapter 3 Data Acquisition

V600 is able to gain its high data acquisition ability through RFID, fingerprint and camera：

• Data acquisition and identification and validation for both passengers and drivers with fingerprint and IC card.

• Face recognition can be established by related software.

•Used in data acquisition for driving school vehicles, school buses, taxis, buses, trucks etc.

3.1 RFID

V600 with NXP HF module optional, support ISO14443A/B protocol.

3.1.1 14443A

1、Open App Center. The test demos are showed as below:

2、Press ‘’14443A’’，and press“scan”to start；

- 8 -

3、Support M1 and ULTRA LIGHT read and write；

3.1.2 14443B

Go App Center, open”14443B’’ and scan. The UID info will be scanned

- 9 -

.

3.2 Fingerprint

1. Open the Fingerprint Demo in Appcenter;

2. Put the finger to the fingerprint module and set the ID/name of the template under

„ACQUISITION‟;

3. Put the finger to the fingerprint module properly and identify by ID/Name/Score under

„IDENTIFICATION‟;

- 10 -

4. The local templates can also be checked under „Data‟;

3.3 Camera

3.3.1 Front Camera

Click the camera in the home page and test the front camera function:

- 11 -

3.3.2 External Camera [optional]

Connect the external camera to the extension cable to get external camera running, refer to picture below：

- 12 -

- 13 -

Demo and test:

1.Open OTG function in App center first.

- 14 -

Go main activity app to demo and test the external camera function:

- 15 -

3.4 OBD

OBD with below functions:

• Accurately record the location, speed and fuel consumption, and raise real time alarm.

•It helps analyze driving behaviors and give pertinent suggestions, saving traffic overheads.

•Professional vehicle fault diagnosis is realized to ensure road safety and prolong life span.

- 16 -

OBD connector connect to vehicle, refer to picture below：

Chapter 4 Network Communication

Whether indoors or outdoors, V600 provides enterprises with anywhere, anytime real-time connectivity by Bluetooth, fast 4G LTE network and 2.4G & 5G Wi-Fi.

4.1 Phone

4.1.1 Phone Call

1、 Click this icon

；

2、Click the number button to input the numbers;

3、 Click the button to confirm and dial;；

- 17 -

4、Click the to end the calling;；

4.1.2 Contacts

1. Click „Contacts‟ to open the contacts list;

2. Click „

3. Click „

‟ to add the new contact;

‟ to import/export or delete the contact list;

- 18 -

4.1.3

Messaging

1. Click „ ‟ to open the message list;

2. Click „ ‟ to input the content;

3. Click „ ‟ to send the message;

4. Click „ ‟ to add photos, videos;

- 19 -

4.2

GPS

1. Open the GPS demo in App center and turn on GPS module;

2. Set the GPS parameters and get the GPS data information;

- 20 -

- 21 -

4.3 Bluetooth

1. Open the Bluetooth demo in App center and turn on the Bluetooth;

2. Input the content or select the file, then scan the nearby Bluetooth printer and pair them;

3. Select the printer and click „Print‟ to print。

Chapter 5

5.1 PING

1. Open the Ping in App center;

- 22 -

2. Set the Ping parameters and select the internal/external addresses;

5.2Volume Settings

1. Open the Volume Setting demo in Appcenter;

2. Set the volumes based on the requirements;

- 23 -

5.3 Sensor

1. Open the Sensor demo in App center;

2. Test the sensor based on the requirements;

- 24 -

5.4

Keyboard

1. Open the Keyboard demo in Handset Appcenter;

2. Set and test the key values of the device;

- 25 -

5.5

Network

1. Open the Network demo in Appcenter;

2. Test the WIFI/Mobile signal based on the requirements;

- 26 -