Product Overview

Product Overview
Product Overview
World class manufacturers of alarm, signalling, control
and notification products for use in hazardous and
industrial areas.
Introduction
In today’s intensely competitive marketplace, proven reliability and expertise combine with
functionality to drive the ultimate purchasing decision. When you are working on a multi-million
dollar construction project, you need a partner that can support you with tried-and-tested products
as well as a full service and support package from initial system definition through to design
and service. Cooper MEDC is dedicated to maximising both personnel and equipment safety
by offering a comprehensive range of innovative notification solutions designed for potentially
explosive atmospheres and harsh industrial and marine environments.
Proven solutions for
harsh and hazardous
environments
Thousands of Products,
Hundreds of Solutions,
One Cooper
Designers and manufacturers of alarm, signal,
control and communications equipment since 1975,
Cooper MEDC has developed a range of products
specifically designed for harsh environmental
conditions and where there is a risk of explosion
due to the presence of flammable atmospheres both
offshore and onshore. The extensive range of manual,
visual, audible alarms and loudspeakers has been
developed in close collaboration with customers to
deliver the best combination of performance and
safety. Through its vast global presence, technical
sales force and engineering experts, Cooper MEDC
meets the demanding standards of a multitude of
industries including: oil, gas, petrochemical, marine
and mining.
Within Cooper Industries’ Safety division, Cooper
MEDC’s notification equipment is part of a
comprehensive portfolio of solutions which also
includes emergency lighting, security and fire
detection as well as lighting fixtures and electrical
installation materials.
Technical solutions and
superior performance
Cooper MEDC has pioneered the use of glass
reinforced polyester (GRP) in explosion-proof products
to deliver solutions with reduced maintenance,
extended lifetime and lower cost of ownership. Since
1975, the oil and gas industry has counted on Cooper
MEDC for the most reliable and highly respected
alarms and loudspeakers in the industry. Extensive
quality certifications include ATEX, CQST, UL, ULC,
CSA, GOST R, GOST K, IECEx and Inmetro and
demonstrate our commitment to maintaining our
leadership position in the market.
2
Cooper Safety specialises in products designed to
save lives and protect property in the most demanding
industrial, residential and commercial environments
worldwide. The company’s high-quality brands have
earned leadership positions in the markets we serve
and that leadership is sustained through unparalleled
sales support, market expertise and local availability.
Cooper Safety is a division of Cooper Industries with
manufacturing facilities in 23 countries and more than
25,000 people throughout the world.
How to use this Overview
This overview contains concise information on Cooper MEDC products for use in potentially
explosive atmospheres, harsh industrial and marine environments.
To use this guide, refer to the product group of interest, read through the brief information and select
the specific product for your application.
For more detailed information visit our website www.coopermedc.com where a detailed datasheet can
be downloaded. Or alternatively contact our sales offices in the UK and the USA for a full catalogue.
Manual Alarm Call Points
6
Status Lights
9
Beacon / Strobes
12
Sounders / Horns
20
Combination Units
24
Loudspeakers
27
Detectors / Control / Distribution
31
Heavy Duty Industrial / Marine
35
Cable Glands / Accessories
38
North American Certified Products
42
Sales Enq. UK: +44 (0)1773 864 100 Sales Enq. USA: +1 (713) 937- 9772 E-Mail: [email protected] Web: www.coopermedc.com
3
Hazardous Area Guide
This information is intended as a guide only and further expert guidance should be
sought before placing into service, maintaining or repairing any item of equipment in
a Potentially Explosive Atmosphere.
Definition | Potentially Explosive Atmospheres exist where there is a risk of explosion due to mixtures of gas/air, vapour/air, dust/air
or other flammable combinations. Where electrical equipment has to be used in these areas, it must be so designed and constructed
such that it does not create sources of ignition capable of igniting these mixtures.
Area Classification | Process plants are divided into Zones (European and IEC method) or Divisions (North American method)
according to the likelihood of a Potentially Explosive Atmosphere being present. Note: North American legislation now allows Zones to
be used to classify areas, where this practice is used it follows the IEC Zone method.
European & IEC Classification
Definition of zone or division
North American Classification
Zone 0 (gases)
Zone 20 (dusts)
An area in which an explosive mixture is
continuously present or present for long periods
Class I Division 1 (gases)
Class II Division 1 (dusts)
Zone 1 (gases)
Zone 21 (dusts)
An area in which an explosive mixture is
likely to occur in normal operation
Class I Division 1 (gases)
Class II Division 1 (dusts)
Zone 2 (gases)
Zone 22 (dusts)
An area in which an explosive mixture is not
likely to occur in normal operation and if it
occurs it will exist only for a short time
Class I Division 2 (gases)
Class II Division 2 (dusts)
Class III Division 1 (fibres)
Class III Division 2 (fibres)
Gas Groups, Dusts and Fibres
Temperature
There are two main gas groups, Group I – Mining only and
Group II – Surface Industries.
To guard against hot surfaces igniting gases, all electrical
equipment intended for use in Potentially Explosive Atmospheres
is classified according to the maximum surface temperature it
will reach in service (normally based on a surrounding ambient
temperature of 40°C (102°F).
These categories are used in European and I.E.C.
groupings.
Group I is concerned only with underground mining where
methane and coal dust are present.
Group II gases occurring in surface industries, are subgrouped according to their volatility. This enables electrical
equipment to be designed to less onerous tolerances if it is
to be used with the least volatile gases.
Typical gas/
material
Methane
Acetylene
Hydrogen
Ethylene
Propane
Metal dust
Coal dust
Grain dust
European/I.E.C.
Gas Group
North American
Gas Group
I
IIC
IIC
IIB
IIA
-
A
B
C
D
E
F
G
ATEX
After 1st July 2003, the ATEX directive came into force and
is a mandatory requirement for all equipment intended for
use in Potentially Explosive Atmospheres within the E.U. All
relevant MEDC equipment is covered by the date it comes
into force and many are already certified. It should be noted
also that MECHANICAL equipment is covered by the ATEX
directive so for the first time items such as gearboxes will
have to carry ATEX certification.
4
Temperature Classification
European/I.E.C.
North American
Maximum Surface
Temperature
T1
T2
T1
T2
T2A
T2B
T2C
T2D
T3
T3A
T3B
T3C
T4
T4A
T5
T6
450° C
300° C
280° C
260° C
230° C
215° C
200° C
180° C
165° C
160° C
135° C
120° C
100° C
85° C
T3
T4
T5
T6
The equipment coding will be as the current practice plus an
additional code as follows:
Ex II 2GD i.e.
Ex – Explosionproof in accordance with ATEX.
II – Group II surface industries
2 – Category 2 equipment (suitable for use in Zone 1) note:
Category 1 is suitable for Zone 0.
Category 3 is suitable for Zone 2.
G – suitable for atmospheres containing gas
D – suitable for atmospheres containing dust
Equipment will be CE marked when certified to ATEX.
For more information about hazardous areas, download the
guide from www.coopermedc.com.
Types of Electrical Equipment Suitable for use in
Potentially Explosive Atmospheres
European
Area of use
Designation
IEC
Area of use
Designation
USA
Area of use
Designation
Standard
Standard
Standard
Flameproof Enclosure – An enclosure used to house electrical
equipment, which when subjected to an internal explosion will not
ignite a surrounding explosive atmosphere.
Zones 1 & 2
Zones 1 & 2
EExd
EN60079-1
Exd
IEC60079-1
Class I
Divisions 1 & 2
–
UL1203
Intrinsic Safety – A technique whereby electrical energy is limited
such that any sparks or heat generated by electrical equipment is
sufficiently low as to not ignite an explosive atmosphere.
Zones 0, 1 & 2
Zones 1 & 2
EExi
EN60079-11
Exi
IEC60079-11
Class I
Divisions 1 & 2
–
UL913
Increased Safety – This equipment is so designed as to eliminate
sparks and hot surfaces capable of igniting an explosive
atmosphere.
Zones 1 & 2
EExe
EN60079-7
Zones 1 & 2
Exi
IEC60079-7
–
–
–
Purged and Pressurised – Electrical equipment is housed in an
enclosure which is initially purged to remove any explosive mixture,
then pressurised to prevent ingress of the surrounding atmosphere
prior to energisation.
Zones 1 & 2
Zones 1 & 2
EExp
EN60079-2
Exp
IEC60079-2
Class I
Divisions 1 & 2
–
NFPA496
Encapsulation – A method of exclusion of the explosive atmosphere
by fully encapsulating the electrical components in an approved
material.
Zones 1 & 2
EExm
EN60079-18
Zone 1 & 2
Exm
IEC60079-18
–
–
–
Oil Immersion – The electrical components are immersed in oil,
thus excluding the explosive atmosphere from any sparks or hot
surfaces.
Zone 1 & 2
Zones 1 & 2
EExo
EN50015
Exo
IEC60079-6
Class I
Division 2
–
UL698
Powder Filling – Equipment is surrounded with a fine powder, such as
quartz, which does not allow the surrounding atmosphere to come
into contact with any sparks or hot surfaces.
Zones 1 & 2
EExq
EN50017
Zones 1 & 2
Exq
IEC60079-5
–
–
–
Non-sparking – Sparking contacts are sealed against ingress of the
surrounding atmosphere, hot surfaces are eliminated.
Zone 2
EExn
EN60079-15
Zone 2
Exn
IEC60079-15
–
–
–
Different techniques are used to prevent electrical equipment from igniting
explosive atmospheres. There are restrictions on where these different
types of equipment can be used as follows:
Selection, Installation and Maintenance of Electrical Equipment Intended for use in Potentially Explosive Atmospheres
International and national standards are published giving details of requirements for the safe use of Electrical Equipment in Potentially
Explosive Atmospheres as follows:
General Recommendations
Classification of Hazardous Areas
Inspection and Maintenance of Electrical Equipment
Requirements for Flameproof Enclosures
Requirements for Intrinsically Safe Equipment
Requirements for Increased Safety Equipment
Requirements for Purged and Pressurised Equipment
Requirements for Non-Sparking Equipment
International
Europe
U.S.A.
IEC60079-14
IEC60079-10
IEC60079-17
IEC60079-14
IEC60079-14
IEC60079-14
IEC60079-14
IEC60079-14
EN60079-14
EN60079-10
EN60079-17
EN60079-14
EN60079-14
EN60079-14
EN60079-14
EN60079-14
N.E.C. Chapter 5
N.E.C. Chapter 5
N.E.C. Chapter 5
N.E.C. Chapter 5
N.E.C. Chapter 5
N.E.C. Chapter 5
-
Cooper MEDC advise that all Explosion-proof electrical equipment is maintained, by suitably trained personnel, in
accordance with the Manufacturers’ recommendations.
Any spare parts used should be purchased from the original Manufacturer and repairs should be carried out by the
Manufacturer or under his supervision, in order that the item remains in conformance with the certification documents.
Sales Enq. UK: +44 (0)1773 864 100 Sales Enq. USA: +1 (713) 937- 9772 E-Mail: [email protected] Web: www.coopermedc.com
5
Manual Alarm Call Points
Cooper MEDC offer a range of manual alarm call
points, in various materials covering push button and
break glass versions.
Manual alarm call points are designed for the purpose
of raising an alarm manually once verification of a fire
or emergency condition exists, by operating the push
button or break glass the alarm signal can be raised.
There are options for the inclusion of LED status
indicators and addressable boards to give the unit an
individually recognised location (or address) within
the system. These manual call points are designed to
meet global industrial and fire application standards.
6
Manual Alarm Call Points
Explosionproof & Weatherproof – Break
Certification
Intrinsically Safe
Increased Safety
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Entries
Weight
Options
ATEX, UL, CSA, GOST ‘R’ & ‘K’, CQST, Inmetro,
Russian fire approved
ATEX Ex II 1GD, EExia IIC T4
ATEX Ex II 2GD, EExed(m) IIC T4 (T6)
Model dependant - refer to datasheet
-40°C to +50°C (EExia)
-20°C to +50°C (EExed)
IP66 & 67
Corrosion-free GRP
Up to 4 x 20mm or 16mm (NPT for UL)
1.2kg (varies with model)
Body colour, LED, lift flap, series & EOL resistors,
diodes, earth continuity, terminals, certification, tag &
duty labels.
Explosionproof & Weatherproof –
Certification
Intrinsically Safe
Increased Safety
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Entries
Weight
Options
Break Glass Call Point
| BG2
ATEX
ATEX Ex II 1GD, EExia IIC T4
ATEX Ex II 2GD, EExed(m) IICT4 (T6)
Model dependant - refer to datasheet
-40°C to +50°C (EExia)
-20°C to +50°C (EExed)
IP66 & 67
Corrosion-free GRP
2 x 20mm
1.2kg
Lift flap, series & EOL resistors
Explosionproof & Weatherproof – Break
Certification
Intrinsically Safe
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Entries
Weight
Options
| BG
Glass Call Point
Glass Call Point
| BG3
ATEX, CQST
ATEX Ex II 1G, EExia IIC T4
Model dependant - refer to datasheet
-55°C to +55°C (EExia)
IP66 & 67
Corrosion-free GRP
2 x 20mm
0.5kg
Body colour, LED, lift flap, series & EOL resistors,
tag & duty labels.
Sales Enq. UK: +44 (0)1773 864 100 Sales Enq. USA: +1 (713) 937- 9772 E-Mail: [email protected] Web: www.coopermedc.com
7
Manual Alarm Call Points
PB | Push Button Call Point – Explosionproof & Weatherproof
Certification
Intrinsically Safe
Increased Safety
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Entries
Weight
Options
ATEX, UL*, CSA*, GOST ‘R’ & ‘K’, CQST, Inmetro,
Russian fire approved
ATEX Ex II 1GD, EExia IIC T4
ATEX Ex II 2GD, EExed(m) IIC T4 (T6)
Model dependant - refer to datasheet
-40°C to +70°C (EExia)
-20°C to +50°C (EExed)
IP66 & 67
Corrosion-free GRP
Up to 4 x 20mm or 16mm (NPT for UL)
1.2kg
Body colour, LED, series & EOL resistors, diode,
earth continuity (Not UL), turn & push, self reset, tag
& duty labels.
* Refer to North American section (pg 44)
SM87 BG | Break Glass Call Point – Explosionproof & Weatherproof
Certification
Intrinsically Safe
Flameproof
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Entries
Weight
Options
ATEX, CSA, GOST ‘R’ & ‘K', CQST, Inmetro,
IECEx, Russian fire approved
ATEX Ex II 1G, Exia IIC T4
ATEX Ex II 2G, Exd IIC T5, T6
Zone 0, Zone 1 and Zone 2 use*
-55°C to +70°C
-20°C to +55°C (LED) -20°C to +70°C
IP66 & 67
Stainless Steel or Alloy
Up to 4 x 20mm or 25mm
3.8kg (Stainless Steel) 2.5kg (Alloy)
Body colour, lift flap, LED, resistor, diode, 3 & 4 pole
changeover switch, certification, tag & duty labels.
*Model dependant.
SM87 PB | Push Button Call Point – Explosionproof & Weatherproof
Certification
Intrinsically Safe
Flameproof
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Entries
Weight
Options
ATEX, UL, CSA, GOST ‘R’ & ‘K’, CQST, Inmetro,
IECEx, Russian fire approved
ATEX Ex II 1G, Exia IIC T4
ATEX Ex II 2G, Exd IIC T6
Zone 0, Zone 1 and Zone 2 use*
-55°C to +70°C
-20°C to +55°C (LED) -20°C to +70°C
IP66 & 67
Stainless Steel or Alloy
Up to 4 x 20mm or 25mm (NPT for UL)
3.8kg (Stainless Steel) 2.5kg (Alloy)
Body colour, LED, resistor, diode,
3 & 4 pole changeover switch, certification, tag &
duty labels.
*Model dependant.
8
ɀ Industry first IECEx Pull Handle Call Point
ɀ All GRP corrosion free construction with retained 316L stainless steel cover screws
ɀ Suitable for both Cable and Conduit installations
ɀ Easy installation
ɀ True double action pull handle, designed to work effortlessly with industrial PPE
ɀ IP66 & IP67 and an ambient temperature range of -55°C to +70°C
Explosionproof & Weatherproof – Pull
Certification
Flameproof
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Entries
Weight
Options
Handle Call Point |
PH1
ATEX, IECEx
Ex II 2 GD, EX d IIC T6, Ex tb IIIC T85°C
Zone 1 and Zone 2 use.
-55°C to +70°C
IP66 & IP67, NEMA 4X & 6
Corrosion-free GRP
Up to 2 x M20 or M25, or up to 2 x ½” or ¾” NTP
2.6kg
Series resistor, EOL resistor, Diode
Please contact Cooper MEDC Technical Sales for further information
Sales Enq. UK: +44 (0)1773 864 100 Sales Enq. USA: +1 (713) 937- 9772 E-Mail: [email protected] Web: www.coopermedc.com
9
Status Lights
Cooper MEDC offer a range of Status Lights designed
for potentially explosive atmospheres and harsh
rsh
environmental conditions.
as,
Status lights are commonly found in oil, gas,
ere
petrochemical and other hazardous areas where
ntify
multicoloured lamp combinations are used to identify
the safety status of specific zones.
10
Status Lights
Explosionproof & Weatherproof – Xenon, Filament, Fluorescent & LED Status Lamps
Certification
Flameproof
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Entries
No. of Ways
Options
ATEX, GOST ‘R’ & ‘K’, CQST, Inmetro, CSA, IECEx
ATEX Ex II 2G, Exd IIC T4 (LED/FiIament)
ATEX Ex II 2G, Exd IIC T6 (Xenon/Fluorescent)
Zone 1 and Zone 2 use.
-20°C to +55°C (LED/Fluorescent)
-55°C to +70°C* (Xenon/Filament)
IP66 & 67
Stainless Steel or Alloy
Up to 3 x 20mm or 25mm
Up to 5
Body & lens colour, certification, tag & duty labels.
*Model dependant, refer to data sheet.
Explosionproof & Weatherproof – Xenon,
Certification
Increased Safety
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Entries
No. of Ways
Options
Filament & LED Status Lights
| SL5
ATEX, CQST
ATEX Ex II 2G,EExe(m) II T3, T4
Zone 1 and Zone 2 use.
-40°C to +55°C (Xenon/Filament)
-40°C to +45°C (LED)
IP66 & 67
Corrosion-free GRP
Up to 2 x 16mm or 20mm or 1 x 25mm or 32mm
Up to 5
Body & lens colour, certification, tag & duty labels.
Explosionproof &Weatherproof –
Certification
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Entries
No. of Ways
Options
| SM87 SL
Status Lights
| SL15 Range
ATEX, IECEx & UL approved
Model dependant - refer to datasheet
-55°C to +70°C
IP66 & 67
Corrosion-free GRP
Up to 2 x ½" or 2 x ¾" entries. ATEX has M20 or M25.
Up to 4
Various flash rates available for xenon units. Various
lens colours. Optional cast or wire lens guard.
ATEX/IECEx Version
Sales Enq. UK: +44 (0)1773 864 100 Sales Enq. USA: +1 (713) 937- 9772 E-Mail: [email protected] Web: www.coopermedc.com 11
Beacons / Strobes
XB11SL | Xenon, Filament & Fluorescent Status Lamps – Explosionproof & Weatherproof
Certification
Flameproof
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Entries
No. of Ways
Options
ATEX, UL, Inmetro, CQST, IECEx
ATEX Ex II 2GD, Exd IIB T5, T6
Zone 1 and Zone 2 use.
-55°C to +70°C
IP66 & 67
Corrosion-free GRP
1 x 20mm (NPT for UL)
Up to 5
Body & lens colour, tag & duty labels.
Status Lamps can also be configured using the high intensity XB4 range.
XB12SL | Xenon, Filament & Fluorescent Status Lamp – Explosionproof & Weatherproof
Certification
Flameproof
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Entries
No. of Ways
Options
12
ATEX, UL, Inmetro, GOST, CQST, IECEx
ATEX Ex II 2G, Exd IIB T4, T5
Model dependant - refer to datasheet
-55°C to +70°C
IP66 & 67
Corrosion-free GRP
1 x 20mm (NPT for UL)
Up to 5
Body & lens colour, tag & duty labels.
© BP p.l.c
Beacons / Strobes
Cooper MEDC offer a range of beacons including
flashing, steady-state indicators and rotating units.
These may be used to warn of potential hazards or
indicate the status of plant items, gas and oil leaks,
evacuation alerts and many more.
The signals may operate as stand-alone units or be
incorporated into a wider system, such as a fire panel.
Within this section there is a wide variety of output
values and lens colours.
Sales Enq. UK: +44 (0)1773 864 100 Sales Enq. USA: +1 (713) 937- 9772 E-Mail: [email protected] Web: www.coopermedc.com 13
Beacons / Strobes
SM87 HXB | 5 Joule Flashing Xenon – Explosionproof & Weatherproof
Certification
Flameproof
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Entries
Weight
Options
ATEX, UL, CSA, GOST ‘R’ & ‘K’, CQST, Inmetro,
IECEx, Russian fire approved
ATEX Ex II 2GD, Exd IIC T4,T5, T6
Model dependant - refer to datasheet
-55°C to +70°C (Exd)
IP66 & 67
Stainless Steel or Alloy
Up to 4 x 20mm or 25mm (NPT for UL)
3.8kg (Stainless Steel) or 2kg (Alloy)
Body & lens colour, EOL resistor, tel. & relay initiate,
lens guard, tag or duty labels, flash rate, high temp.
version (-40°C to +85°C) available, voltages 24-48V
d.c., 110-254V a.c.
XB11 | 5 Joule Flashing Xenon – Explosionproof & Weatherproof
Certification
Flameproof
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Entries
Weight
Options
ATEX, UL, CQST, Inmetro, GOST ‘R’ & ‘K’, IECEx
Dual listed ATEX/UL, Russian fire approved
ATEX Ex II 2GD, Exd IIB T4, T5, T6
Zone 1 and Zone 2 use.
-55°C to +70°C
IP66 & 67
Corrosion-free GRP
2 x 20mm (NPT for UL)
2.5kg
Body & lens colour, mounting, tel. initiate, lens
guard, flash rate, earth continuity, voltages 24V d.c.,
110V a.c., 240 V a.c.
XB9 | 5 Joule Flashing Xenon – Explosionproof & Weatherproof
Certification
Flameproof
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Entries
Weight
Options
14
ATEX, Inmetro, IECEx, CQST, Russian fire approved
ATEX Ex II 2G, Exd IIC T5, T6
Zone 1 and Zone 2 use.
-55°C to +55°C
IP66 & 67
Corrosion-free GRP
1 x 20mm or PG13.5
1.6kg
Body & lens colour, tag or duty labels, voltages, flash
rate, 24-48V d.c., 110-254V a.c.
Explosionproof & Weatherproof –10
Certification
Flameproof
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Entries
Weight
Options
| XB10
& 15 Joule Flashing Xenon
ATEX, GOST ‘R’, Inmetro, IECEx, Russian fire
approved
ATEX Ex II 2G, Exd(e) IIB T4
Zone 1 and Zone 2 use.
*-55°C to +65°C 10 Joule
*-55°C to +50°C 15 Joule
IP66 & 67
Corrosion-free GRP
Up to 3 x 20mm or 2 x PG13.5
Exd 2.8kg Exde 3.6kg
Body & lens colour, tel. initiate, earth continuity,
flash rate, terminal chamber, voltages 24-48V d.c.,
110-254V a.c.
*Exd version only, see data sheet for more information.
UL Hazardous & Ordinary Locations – 10
Certification
Hazardous Locations
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Entries
Weight
Options
UL (1971 compliant)
Class I, Div 2, Groups A-D
Class II, Div 2, Groups F & G
Model dependant - refer to datasheet
-55°C to +70°C
IP66 & 67
Corrosion-free GRP
1 x ¾" NPT
1kg
Body & lens colour, lens guard, tag & duty labels,
relay initiate, flash rate, voltages 12-48V d.c., 110254V a.c.
Explosionproof & Weatherproof –15
Certification
Direct Mount
Pipe Mount UL only
Flameproof
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Entries
Weight
Options
| XB16
Joule Flashing Xenon
Joule Flashing Xenon
| XB15
ATEX, UL, Inmetro, ULC, IECEx, CQST, Russian
fire approved
ATEX Ex II 2GD, Exd IIC T4, T5, T6
Zone 1 and Zone 2 use.
-55°C to +70°C
IP66 & 67
Corrosion-free GRP
Up to 3 x 20mm or 3 x 25mm (NPT for UL)
2.6-3kg
Body & lens colour, relay & telephone initiate, flash
rate, voltages 12-48V d.c., 110-254V a.c.
Sales Enq. UK: +44 (0)1773 864 100 Sales Enq. USA: +1 (713) 937- 9772 E-Mail: [email protected] Web: www.coopermedc.com 15
Beacons / Strobes
XB4 | 21 Joule Flashing Xenon – Explosionproof & Weatherproof
Certification
Flameproof
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Entries
Weight
Options
ATEX, UL, GOST ‘R’, Inmetro, IECEx, Russian fire
approved
ATEX Ex II 2G, Exd(e) IIC T4, T5, T6
Zone 1 and Zone 2 use.
-55°C to +70°C
IP66 & 67
Stainless Steel or Alloy
Up to 4 x 20mm or 25mm
15-16kg (Stainless Steel), 6.6-7.6kg (Alloy)
Body & lens colour, lens guard, tag & duty labels,
terminal chamber, initiation options, flash rate,
voltages 24-48V d.c., 110-254V a.c.
XB12 | 21 Joule Flashing Xenon – Explosionproof & Weatherproof
Certification
Flameproof
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Entries
Weight
Options
ATEX, UL, GOST ‘R’ & ‘K’, CQST, Inmetro, IECEx,
Russian fire approved
ATEX Ex II 2G, Exd IIB T4, T5, T6
Zone 1 and Zone 2 use.
-55°C to +70°C
IP66 & 67
Corrosion-free GRP
2 x 20mm (NPT for UL)
7.0kg
Body & lens colour, lens guard, tag & duty labels,
telephone initiation, flash rate, mounting method,
earth continuity, voltages 24V d.c., 110-240V a.c.
XB8 | 0.5 Joule Flashing Xenon – Explosionproof & Weatherproof
Certification
Intrinsically Safe
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Entries
Weight
Options
16
ATEX, GOST ‘R’, IECEx
ATEX Ex II 1G, Exia IIB/IIC T4
Zones 0, 1, 2 & safe area use.
-55°C to +60°C
IP66 & 67
Corrosion-free GRP body, Polycarbonate lens
Up to 3 x 20mm via knockouts
1.4kg
Body & lens colour, certification, tag & duty labels,
voltages 12-24V d.c.
Weatherproof & Heavy Duty –10
Area Classification
Operating Temperature
Ingress Protection
Material
Entries
Weight
Options
Joule Flashing Xenon
| XB13
Weatherproof.
-55°C to +70°C
IP66 & 67
Corrosion-free GRP body Polycarbonate lens
Up to 3 x 20mm via knockouts
1.1kg
Body & lens colour, tag & duty labels, lens guard,
telephone & relay initiate, single & dual flash mode,
voltages 12 or 24V DC, 115 or 230V AC.
Explosionproof & Weatherproof – LU1/LU3 10 Watt Steady Filament/Fluorescent
Certification
Flameproof
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Entries
Weight
Options
| SM87 LU1/LU3
ATEX, UL, CSA, CQST, Inmetro, GOST ‘R’ & ‘K’,
IECEx, Russian fire approved
ATEX Ex II 2GD, Exd(e) IIC T5, T6
Zone 1 and Zone 2 use.
*-55°C to +55°C -55°C to +70°C
IP66 & 67
Stainless Steel or Alloy
Up to 3 x 20mm or 25mm (NPT for UL)
3.8kg (Stainless Steel), 2.5kg (Alloy)
Body & lens colour, lens guard, tag or duty labels,
terminal chamber, voltages 24-48V d.c., 110-254V a.c.
* Model dependant
Explosionproof & Weatherproof –10
Watt Steady Filament & Fluorescent | FB11
Certification
Flameproof
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Entries
Weight
Options
& FL11
ATEX, UL, Inmetro, GOST ‘R’, IECEx,
Russian fire approved
ATEX Ex II 2GD, Exd IIB T4, T5, T6
Zone 1 and Zone 2 use.
*-55°C to +70°C FB11 -20°C to +70°C FL11
IP66 & 67
Corrosion-free GRP
2 x 20mm (NPT for UL)
2.8kg
Body & lens colour, lens guard, tag & duty labels, lamp
wattage, unit fixing, earth continuity, mounting method,
voltages 24-48V d.c., 110-254V a.c.
* Model dependant
Sales Enq. UK: +44 (0)1773 864 100 Sales Enq. USA: +1 (713) 937- 9772 E-Mail: [email protected] Web: www.coopermedc.com 17
Beacons / Strobes
FB4 & FL4 | 100 Watt Steady Filament & 39 Watt Fluorescent – Explosionproof & Weatherproof
Certification
Area Classification
Flameproof
Certified Ambient Temperature
Ingress Protection
Material
Entries
Weight
Options
ATEX, UL, GOST ‘R’, Inmetro, IECEx
Zone 1 and Zone 2 use.
ATEX Ex II 2G, Exd(e) IIC T3, T4, T5, T6
*-55°C to +70°C (FB4 Exd)
-50°C to +55°C (FB4 Exde)
*-20°C to +70°C (FL4)
IP66 & 67
Stainless Steel or Alloy
Up to 4 x 20mm or 25mm
14.9-17.3kg (Stainless Steel), 6.5 - 8.9kg (Alloy)
Body & lens colour, lens guard, tag & duty labels,
lamp wattage, relay initiate or terminal chamber,
voltages 24-48V d.c., 110V d.c.,
110-254V a.c.
* Model dependant
FB12 & FL12 | 100 Watt Steady Filament & 39 Watt Fluorescent – Explosionproof & Weatherproof
Certification
Flameproof
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Entries
Weight
Options
ATEX, UL, GOST ‘R’, Inmetro, IECEx,
Russian fire approved
ATEX Ex II 2G, Exd IIB T3, T4, T5, T6
Zone 1 and Zone 2 use.
-55°C to +55°C (FB12)
*-20°C to +70°C (FB11)
IP66 & 67
Corrosion-free GRP
2 x 20mm (NPT for UL)
7.2 - 7.6kg
Body & lens colour, lens guard, tag & duty labels,
lamp wattage, unit fixing, earth continuity, mounting
method, voltages 24-48V d.c., 110-254V a.c.
* Model dependant
FB15 | 60 Watt Steady Filament – Explosionproof & Weatherproof
Certification
Flameproof
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Entries
Weight
Options
18
ATEX, UL, Inmetro, GOST ‘R’, IECEx,
Russian fire approved
ATEX Ex II 2GD, Exd IIC T3, T4
Zone 1 and Zone 2 use.
-55°C to +70°C
IP66 & 67
Corrosion-free GRP
2 x 20mm (NPT for UL)
2.6 Kg (Pipe Mount) 3.0 Kg (Direct Mount)
Body & lens colour, lens guard, tag & duty labels,
lamp wattage, unit fixing, mounting method, voltages
24-48V d.c., 110-254V a.c.
Direct Mount
Pipe Mount
Explosionproof & Weatherproof – 200
Watt Steady Filament & 52 Watt Steady Fluorescent
Certification
Flameproof
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Entries
Weight
Options
ATEX
ATEX Ex II 2G, EExd(e) IIB T3, T4
Zone 1 and Zone 2 use.
-20°C to +30°C (FB5)
-20°C to +50°C (FL5)
IP66, 67 & 68
Alloy
Up to 4 x 20mm or 25mm
11.6kg to 14.3kg
Body colour, lens guard, mounting method,voltages
220-254V a.c.
Explosionproof & Weatherproof – Up to 192 Cd Steady or Flashing LED (Selectable)
Certification
Flameproof
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Entries
Weight
Options
| FB5 & FL5
| SM87 LED
ATEX, UL, GOST, Inmetro, CSA, CQST,
GOST ‘R’ & ‘K’, IECEx, Russian fire approved
ATEX Ex II 2GD, Exd IIC T6
Zone 1 and Zone 2 use.
-20°C to +55°C
IP66 & 67
Stainless Steel or Alloy
Up to 3 x 20mm or 25mm
4.5kg (Stainless Steel), 2.5kg (Alloy)
Body & lens colour, lens guard, tel & relay initiate,
EOL resistor, terminal chamber, voltages 24-48V d.c..
Energy efficient LED product
Explosionproof & Weatherproof – 5 Joule Sequenced & 70 Watt Rotating
Certification
Flameproof
Area Classification
Certified Ambient Temperatur
Ingress Protection
Material
Entries
Weight
Options
| XB5 & TH5
ATEX
ATEX Ex II 2G, EExd(e) IIB T4, T6
Zone 1 use.
-20°C to +55°C (TH5)
-20°C to +40°C (XB5)
IP66, 67 & 68
Alloy
Up to 4 x 20mm or 25mm – Exe only
14.6 - 15.9kg
Body & lens colour, lens guard, tag label, terminal
chamber, rotational speed, voltages *12-48V d.c.,
110-254V a.c.
*See datasheet for voltage option for TH5.
Sales Enq. UK: +44 (0)1773 864 100 Sales Enq. USA: +1 (713) 937- 9772 E-Mail: [email protected] Web: www.coopermedc.com 19
Beacons / Strobes
HS5 & MF5 | 70 Watt Sodium/80 Watt Mercury Fluorescent – Explosionproof & Weatherproof
Certification
Flameproof
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Entries
Weight
Options
ATEX, CSA (HS5 only)
ATEX Ex II 2G, EExd(e) IIB T3, T4
Zone 1 and Zone 2 use.
-20°C to +40°C
IP66, 67 & 68
Alloy
Up to 4 x 20mm or 25mm
12.9 - 14.0kg
Body colour, lens guard, tag label, terminal
chamber, mounting method, voltages 220-254V a.c.
TH12 | 55 Watt/70 Watt Rotating Beacon – Explosionproof & Weatherproof
Certification
Flameproof
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Entries
Weight
Options
20
ATEX, GOST ‘R’, Inmetro, IECEx
ATEX Ex II 2G, Exd IIB T3, T4
Zone 1 and Zone 2 use.
-55°C to +70°C
IP66 & 67
Corrosion-free GRP
2 x 20mm
7.6kg
Body & lens colour, lens guard, tag & duty labels,
flash rate, mounting method, earth continuity,
voltages 24V d.c. 110-240V a.c.
Sounders / Horns
Cooper MEDC Sounders and Horns feature a variety
of tone settings, voice messaging or traditional bells.
Sounders and Horns are used to warn of potentially
dangerous situations or to relay instructions.
In addition the alarms may operate as stand-alone
units or be incorporated into a hazard warning system.
A wide variety of sound output levels and other options
are also available. The Sounders and Horns output in
dB(A) is measured to European standards at 1 metre.
Sales Enq. UK: +44 (0)1773 864 100 Sales Enq. USA: +1 (713) 937- 9772 E-Mail: [email protected] Web: www.coopermedc.com 21
Sounders / Horns
DB1 | 113dB(A) Sounder – Explosionproof & Weatherproof
Certification
Flameproof
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Entries
Weight
Options
ATEX, UL, GOST ‘R’, Inmetro, IECEx,
Russian fire approved
ATEX Ex II 2G, Exd IIB T5, T6
Zone 1 and Zone 2 use.
*-20°C to +70°C
IP66
Stainless steel or alloy
Up to 3 x 20mm or 25mm
*5.6-12.7kg (Stainless Steel), 3.5-8.3kg (Alloy)
Body colour, tag & duty labels, two stage (DB1P)
alarms, high output (DB1HP), tel, relay or remote
initiate, EOL resistor, certification, voltages 12-48V
d.c., 110V a.c., 240V a.c.
*Model dependant
DB3 | 118dB(A) Sounder – Explosionproof & Weatherproof
Certification
Flameproof
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Entries
Weight
No. of Tones
Options
ATEX, UL, GOST ‘R’ & ‘K’, CQST, Inmetro, IECEx,
Dual listed ATEX/UL, Russian Fire approved
ATEX Ex II 2GD, Exd(e) IIC T4, T5
Zone 1, Zone 2 and non-Ex use.
*-20°C to +70°C (standard)
*-55°C to +70°C (low temp)
IP66 & 67
Corrosion-free GRP
Up to 2 x 20mm
5.0kg
27 user selectable tones and 5 optional
programmable spaces.
Body colour, tag & duty labels, two stage alarm
(DB3P), low temperature version available, EOL
resistor, certification, terminal chamber voltages
12-48V d.c., 110V-254V a.c.
*Model dependant
DB3V | 110dB(A) Voice Sounder – Explosionproof & Weatherproof
Certification
Flameproof
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Entries
Weight
Speech Duration
Options
ATEX, UL, GOST ‘R’ & ‘K’, CQST, Inmetro, IECEx,
Russian fire approved
ATEX Ex II 2GD, Exd(e) IIC T4, T5
Zone 1, Zone 2 and non-Ex use.
*-20°C to +70°C (standard)
*-55°C to +70°C (low temp)
IP66 & 67
Corrosion-free GRP
Up to 2 x 20mm
5.0kg
Up to 20 seconds repeatable
Body colour, tag & duty labels, low temperature
version available, EOL resistor, record feature,
certification, terminal chamber, ‘mechanical bell’
sound version, voltages 12-48V d.c.
*Model dependant
22
Explosionproof & Weatherproof –103dB(A)
Certification
Intrinsically Safe
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Entries
Weight
No. of Tones
Options
Sounder
| DB7
ATEX, GOST ‘R’, Russian fire approved
ATEX Ex II 1G, EExia IIB/IIC T4
Zones 0, 1, 2 and safe area use.
-55°C to +70°C
IP66 & 67
Corrosion-free GRP
Up to 3 x 20mm via knockouts
1.0kg
27
Certification, body colour, duty & tag labels, voltages
12-24V d.c.
Weatherproof & Heavy Duty –110dB(A)
Area Classification
Operating Temperature
Ingress Protection
Material
Entries
Weight
No. of Tones
Options
| DB5
ATEX, CSA, FM Approved, Inmetro, IECEx,
Russian fire approved
ATEX Ex II 1G & Ex1 M1, Exia IIC T4
Zone 0, Zone 1 and Zone 2 use.
-20°C to +55°C
IP65
Corrosion-free ABS
Up to 2 x 20mm via knockouts
0.3kg
26
Body colour, tag labels, certification, voltages 12V24V d.c.
Explosionproof & Weatherproof –110dB(A)
Certification
Intrinsically Safe
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Entries
Weight
No. of Tones
Options
Sounder
Sounder |
DB12
Weatherproof.
-55°C to +70°C
IP66 & 67
Corrosion-free GRP
Up to 3 x 20mm via knockouts
1kg
27 + 5 programmable
Body colour, tag & duty labels, voltages 12V & 24V d.c.
Sales Enq. UK: +44 (0)1773 864 100 Sales Enq. USA: +1 (713) 937- 9772 E-Mail: [email protected] Web: www.coopermedc.com 23
Sounders / Horns
DB15 | 117dB(A) Sounder – Weatherproof & Heavy Duty
Area Classification
Operating Temperature
Ingress Protection
Material
Entries
Weight
No. of Tones
Options
Weatherproof.
-55°C to +70°C
IP66 & 67
Corrosion-free GRP
2 x 20mm
2.6kg
27 + 5 programmable
Painted grey, tag & duty labels, two stage alarm
(DB15P) version, earth continuity, EOL resistor,
voltages 12-48V d.c., *110-254V a.c.
*Not available in a.c. versions for DB15P.
DB6 | 109dB(A) Bell – Explosionproof & Weatherproof
Certification
Flameproof
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Entries
Weight
Options
24
ATEX, Inmetro, IECEx, Russian fire approved
ATEX Ex II 2G, Exd IIB T5
Zone 1 and Zone 2 use.
-20°C to +55°C
IP65
Cast Iron
2 x 20mm
11kg
Body colour, tag labels, voltages 24V d.c., 240V a.c.
Combination Units
Cooper MEDC combination units are designed for
the purpose of audio and visual awareness in an
emergency situation.
Our range of combination units are suitable for use
in harsh environmental conditions found offshore and
onshore in the oil, gas and petrochemical industries.
Sales Enq. UK: +44 (0)1773 864 100 Sales Enq. USA: +1 (713) 937- 9772 E-Mail: [email protected] Web: www.coopermedc.com 25
Combination Units
CU 1 | 5 & 10 Joule Flashing Xenon / Sounder – Explosionproof & Weatherproof
Certification
Flameproof
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Entries
Weight
Options
ATEX, GOST ‘R’ & ‘K’, Inmetro,
Russian fire approved
ATEX Ex II 2G EExd(e) IIB T3
Zone 1, Zone 2 & non-Ex use.
-50°C to +70°C*
IP66 & 67
Corrosion-free GRP
Up to 2 x 25mm
6.5kg approx
Body & lens colour, tel. initiate, earth continuity, flash
rate, voltages 24–48V d.c. 110–254V a.c.
*High Temperature Unit, See data sheet for other versions.
DB3 / XB11 | 5 Joule Flashing Xenon / Sounder – Explosionproof
Certification
Flameproof
Area Classification
Voltage
Beacon
Sounder
Dimensions (mm)
Options
ATEX, UL, IECEx, GOST ‘R’ & ‘K’, CQST, Dual
Listed ATEX & UL, Inmetro, Russian fire approved
ATEX: Ex II 2GD, Exd IIB T4, T5.
UL: Class I, Div. 1, Groups C & D.
Zone 1 & Zone 2.
24V d.c., 110V a.c., 240V a.c.
Standard: XB11 (Xenon 5J).
Option:
Filament (10W). Fluorescent (≤10W).
Standard: DB3 (long flare) ≤115dBA at 1 metre.
Option:
DB3 (short flare) ≤108dBA at 1 metre.
420 (height) x 220 (width) x 337 (depth).
Refer to data sheet. Specify when ordering.
DB1 HP / SM87 HXB | 5 Joule Flashing Xenon / Sounder – Explosionproof
Certification
Flameproof
Area Classification
Voltage
Beacon
Sounder
Dimensions (mm)
Options
26
ATEX, UL, IECEx, GOST ‘R’, Inmetro,
Russian fire approved
ATEX: Ex II 2G, Exd IIB T3, T4, T5, T6.
UL: Class 1, Div. 2, Group C & D.
Zone 1 and Zone 2.
24V d.c., 110V a.c., 240V a.c.
Standard: SM87 (Xenon 5J).
Option:
Filament (10W). Fluorescent (≤10W).
Standard: DB1 P ≤ 106dBA at 1 metre
Option: DB1 HP ≤ 110dBA at 1 metre
351 (height) x 228 (width) x 205 (depth).
Refer to data sheet. Specify when ordering.
Explosionproof -
5 Joule Flashing Xenon / Sounder
Certification
Flameproof
Area Classification
Voltage
Beacon
Sounder
Beacon
Sounder
Dimensions (mm)
Options
Heavy Duty Industrial Marine
| DB3 / SM87 HXB
ATEX, UL, IECEx, GOST ‘R’ & ‘K’, CQST, Inmetro,
Russian fire approved
ATEX: Ex II 2G, Exd IIC T3, T4, T5.
UL: Class 1, Div. 2, Group C & D.
Zone 1 and Zone 2.
24V d.c., 48V d.c., 240V a.c.
Alloy or Stainless Steel.
Corrosion-free GRP.
Standard: SM87 (Xenon 5J).
Option:
Filament (10W). Fluorescent (≤10W). LED. (≤192cd)
Standard: DB3 (long flare) ≤ 115dB(A) at 1 metre.
Option:
DB3 (short flare) ≤ 108dB(A) at 1 metre.
(Note: Close coupled unit only available ATEX certified).
420 (height) x 220 (width) x 337 (depth).
Refer to data sheet. Specify when ordering.
- 10 Joule Flashing Xenon / Sounder
Applications
Area Classification
Voltage
Beacon
Sounder
Dimensions (mm)
| DB12 / XB13
Harsh Industrial & Marine Environments.
Model dependant - refer to datasheet
12V, 24V d.c., 110V, 240V a.c.
Standard: XB13 (Xenon 10J).
Standard: DB12 110dB(A) at 1 metre.
300 (height) x 195 (width) x 220 (depth).
Sales Enq. UK: +44 (0)1773 864 100 Sales Enq. USA: +1 (713) 937- 9772 E-Mail: [email protected] Web: www.coopermedc.com 27
Loudspeakers
Cooper MEDC’s range of hazardous, heavy duty,
industrial and commercial loudspeakers are designed
to meet the requirements for public address, voice
alarm (evacuation) and background music. The
loudspeakers can generally operate as stand-alone
units, or as part of 100 or 70 volt line systems.
Additionally a wide range of sound output levels (dB /
Watts) are available. The loudspeakers sound output
in dB(A) is measured to European standards at 1 watt
/ 1 metre.
28
Loudspeakers
Explosionproof & Weatherproof – 8
Certification
Flameproof
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Output
Entries
Weight
Tappings @ 25 watts
Options
- 25 Watt Loudspeaker
| DB4
ATEX, UL, GOST ‘R’ & ‘K’, Inmetro, CQST,
Russian fire approved
ATEX Ex II 2GD, Exd(e) IIC T4, T5
Zone 1, Zone 2 & non-Ex use.
*-20°C to +70°C (standard)
-55°C to +70°C (low temp unit)
IP66 & 67
Corrosion-free GRP
107 dBA at 1W at 1 metre
119 dBA at 25W at 1 metre
Up to 2 x 20mm
5.0kg
25, 12.5, 6, 4, 2, 1
Power (8W, 15W, 20W, 25W), body colour, tag & duty
labels, BS5839, part 8 compliance, certification,
terminal chamber, transformer voltage
*Model dependant
Explosionproof & Weatherproof – 8
Certification
Flameproof & Increased Safety
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Output
Entries
Weight
Tappings @ 15 Watts
Options
& 15 Watt Loudspeaker
| DB10
ATEX, GOST ‘R‘ & ‘K’*, CQST*, Inmetro*, IECEx,
Russian fire approved
ATEX Ex II 2G, Exde IIB & H2/IIC T4, T5, T6
Zone 1, Zone 2 & non-Ex use.
-55°C to +70°C
IP66 & 67
Corrosion-free GRP
105 dBA at 1W 1 metre
115 dBA at 15W at 1 metre
Up to 2 x 20mm
3.2kg (model dependant)
15, 8, 4, 2, 1, 0.5, 0.25.
Body colour, tag & duty labels, transformer voltage
15 Watt version
(8 Watt version has short flare)
* Please Contact Cooper MEDC Technical Sales
Sales Enq. UK: +44 (0)1773 864 100 Sales Enq. USA: +1 (713) 937- 9772 E-Mail: [email protected] Web: www.coopermedc.com 29
Loudspeakers
DB14 | 15 Watt Loudspeaker – Weatherproof & Heavy Duty
Area Classification
Ambient Operating Temperature
Ingress Protection
Material
Output
Entries
Weight
Tappings
Options
Weatherproof.
-55°C to +70°C
IP66 & 67
Corrosion-free GRP
107 dBA at 1W at 1 metre
117 dBA at 15W at 1 metre
2 x 20mm
2.6kg
15, 7.5, 5, 4, 2, 0.8
Painted grey, tag & duty labels, transformer voltage,
BS 5839, part 8 compliance, earth continuity
DB16 | 25 and 30 Watt Loudspeaker – Explosionproof & Weatherproof
Certification
Flameproof & Increased Safety
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Output
See data sheet for additional output
Entries
Weight
Tappings @ 30 Watts
Options
30
ATEX, UL, GOST ‘K’, Inmetro,
Russian fire approved
ATEX Ex II 2G, EExde IIB T3
ATEX Ex II 2GD, EExde IIC T110°C
Zone 1, Zone 2 & non-Ex use.
-50°C to +65°C (25W)
-50°C to +40°C (30W)
IP66 & 67
Corrosion-free GRP
IIB version: 1W/1m is 110dBA
25W/1m is 121dBA
30W/1m is 122dBA
IIC version: 3dBA less than IIB versions
Up to 2 x 20mm or 2 x 25mm
5.5kg
30, 25, 12, 6, 4, 2
Body colour, 30W or 25W, transformer, tag & duty labels.
Explosionproof & Weatherproof – 8
& 4 Watt Loudspeaker
Certification
Flameproof and Increased Safety
145
200
Area Classification
Certified Operating Temperature
Ingress Protection
Main body material
Output
IIC version
IIB version
Entries
Dimensions / Weight
Tappings @ 4 Watts
Tappings @ 8 Watts
| DB20 & DB20C
ATEX, IECEx, GOST ‘R’ and ‘K’, Inmetro,
Russian fire approved
ATEX Ex II 2G, Exde IIB T3, T4
ATEX Ex II 2GD Exde IIC T4, T5
Zone 1& 2 (and Zone 21 & 22 : IIC version)
-55°C to +70°C (DB20) -50°C to +70°C (DB20C)
IP66/67
Corrosion-free GRP and ABS (DB20C)
110 dB(A) (DB20) 100 dB (DB20C) at 1W at 1 metre
106 dB(A) at 4W at 1 metre
109 dB(A) at 8W at 1 metre
3 dB(A) higher than IIC versions
2 x 20mm
L137 x Ø124mm / 1.5kg
4, 2, 1, 0.75, 0.38, 0.2
8, 4, 2, 1.5, 0.75, 0.4
Available in stirrup or ceiling mount
Sales Enq. UK: +44 (0)1773 864 100 Sales Enq. USA: +1 (713) 937- 9772 E-Mail: [email protected] Web: www.coopermedc.com 31
Detectors, Controls, Distribution
Here at Cooper MEDC we offer standard and bespoke
control and distribution units for harsh and hazardous
areas.
The control units are designed with convenient operation,
safety and reliability in mind. As a leading manufacturer of
hazardous area and explosion proof equipment, Cooper
MEDC can provide hazardous and safe area control
units in a range of dimensions to suit your required
specification.
32
Detectors, Controls & Distribution
Explosionproof & Intrinsically Safe –
Certification
HD1 EExia/EExem
Ingress Protection
Material
Temperature Settings
Entries
Weight
Options
Explosionproof & Weatherproof –
| HD1
ATEX, GOST ‘R’ & ‘K’, CQST, Inmetro, Dual listed
ATEX/UL, Russian Fire approved
ATEX Ex II 2G, EExd IIB T6
ATEX Ex II 2G, EExem II T6
ATEX Ex II 1G, EExia IIC T6
Zone 0, Zone 1 and Zone 2 use.
-20°C to +125°C EExd (T3) ATEX/GOST ‘R’
-20°C to +55°C EExd (T6)/EExem
-55°C to +55°C EExia
IP66 & 67
Marine Grade Alloy (EExd)
Corrosion-free GRP (EExia/EExem)
140°F to 725°F (60°C to 385°C)
2 x 20mm
1.1-2.0kg (model dependant)
Enclosures, guard, colour, tag and duty labels,
temperature setting. Series and EOL resistors,
blanking plugs.
Flameproof
Increased Safety
Intrinsically Safe
Area Classification
Certified Ambient Temperature
HD1 EExd
Heat Detector
GRP Junction Boxes |
Certification
Increased Safety
Area Classification
Certified Operating Temperature
Ingress Protection
Material
Entries
Weight
Options
EExd
EExia/EExem
JB10 & JB11
ATEX, UL
ATEX Ex II 2G, EExe(m) II T3, T4, T5, T6
Zone 1 & 2 use.
-55°C to +55°C (model dependant)
IP66 & 67
Corrosion-free GRP
Multiple entries per face *
1.1kg JB10 approx 1.8kg JB11 approx
Body colour, tag label, terminals, external earth,
gland continuity, LED, stainless steel fittings, side
cable entries, high temp. version (up to +125°C)
* Refer to datasheet
Explosionproof & Weatherproof – Control
Certification
Increased Safety
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Entries
Weight
Options
Units
| GHG 41181
ATEX, UL
ATEX Ex II 2GD, EExed IIC T6
Zones 1,2 and safe area.
-55°C to +50°C, Versions with switch -55°C to +45°C
IP65 & 66*
Impact Resistant Thermo Plastic
1x M20 Bottom entry as standard
Approx. 0.5kg (model dependant)
Pushbuttons, emergency stop, rotary switches
& block, potentiometer, lamps, key switch, gold
contact block.
*Dependant on version
Sales Enq. UK: +44 (0)1773 864 100 Sales Enq. USA: +1 (713) 937- 9772 E-Mail: [email protected] Web: www.coopermedc.com 33
Detectors, Controls & Distribution
GHG 41182 | Control Units – Explosionproof & Weatherproof
Certification
Increased Safety
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Entries
Weight
Options
ATEX, UL
ATEX Ex II 2GD, EExed IIC T6
Zones 1,2 and safe area.
-55°C to +50°C, Versions with switch -55°C to +45°C
IP65 & 66*
Impact Resistant Thermo Plastic
1x M20 Bottom entry as standard
Approx. 0.5kg (model dependant)
Pushbuttons, emergency stop, contact block,
padlockable, rotary switches & block, potentiometer,
lamps, gold contact block, key switch.
*Dependant on version
GHG 41183 | Control Units – Explosionproof & Weatherproof
Certification
Increased Safety
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Entries
Weight
Options
ATEX, UL
ATEX Ex II 2GD, EExed IIC T6
Zones 1,2 and safe area.
-55°C to +50°C, Versions with switch -55°C to +45°C
IP65 & 66*
Impact Resistant Thermo Plastic
1x M20 Bottom entry as standard
Approx. 1.3kg (model dependant)
Pushbuttons, emergency stop, contact block,
padlockable, rotary switches & block, potentiometer,
lamps, gold contact block.
*Dependant on version
432 434 Range | Control Units – Explosionproof & Weatherproof
4
Certification
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Entries
Weight
Options
*Dependant on version
34
Ex, ATEX, UL
Zones 1,2 and safe area
-55°C to +50°C, Versions with switch -55°C to +45°C
IP65/66*
Impact Resistant Themo Plastic
2x M20 Bottom entry as standard
0.8kg to 1.6kg
Pushbuttons, emergency stop, contact block,
rotary switches & block, potentiometer,
lamps, gold contact block.
Explosionproof & Weatherproof – Terminal Boxes & Control Units
| GHG 74 & 44 Range
A range of GRP or 316 Stainless Steel Terminal Boxes and
Control Units. The Control Units can be fitted with a variety of
lamps, switches, pushbuttons and other accessories.
Certification
Increased Safety
Ingress Protection
Area Classification
Material
Dimensions (mm):
Box Type Box Type
444 23
744 01
448 23
745 02
449 23
746 02
471 23
749 04
444 33
744 21
448 33
745 22
449 33
146 23
447 33
749 24
ATEX, UL
ATEX Ex II 2GD, EExe II T4, T6*
IP65/66*
Model dependant - refer to datasheet
Corrosion-free GRP or 316 Stainless Steel
Width x
271
271
544
817
175
312.5
312.5
941.5
Height x
134
271
271
271
312.5
312.5
312.5
312.5
Depth*
136
136
136
136
151
151
151
151
Explosionproof & Weatherproof – Control Units & Motor Starters
*Dependant
*D
d t on version
i
| GP1, 2, 3 & 4 , G2, JL Range
A range of custom built control and motor starter units which
can be used individually or combined to provide hazardous
area systems for indoor or outdoor use.
Certification
Flameproof
Ingress Protection
Area Classification
Material
Dimensions (mm):
GP1/GP1S
GP2/GP2S
GP3/GP3S
JL4/2/JL4/2S
JL4/3/JL4/3S
G2/G2S
ATEX
*ATEX EX II 2GD
IP65 & 66
Model dependant - refer to datasheet
Cast iron, Stainless Steel or Alloy *
Width x
Height x Depth
580
480
240
480
275
243
580
480
365
305
265
150
305
265
237
156
257
175
*Model dependant
Explosionproof & Weatherproof
| Distribution Panels & Boards
A range of custom built distribution systems utilising Cooper
MEDC’s expertise in hazardous area applications to ensure a
safe and reliable solution to customer specifications.
Certification
Flameproof
Ingress Protection
Area Classification
Material
ATEX
ATEX Ex II 2G, EExd IIB
IP66
Model dependant - refer to datasheet
Cast iron, Stainless Steel or Alloy. *
*Model dependant
Sales Enq. UK: +44 (0)1773 864 100 Sales Enq. USA: +1 (713) 937- 9772 E-Mail: [email protected] Web: www.coopermedc.com 35
Heavy Duty Industrial & Marine
e
Cooper MEDC offer products suitable for Heavy Duty
Industrial and Marine environments.
The Cooper MEDC range includes sounders, beacons,
combination units in heavy duty designs with high ingress
protection ratings.
Products conform to IP 66 & 67 ratings, as well as a
variety of other globally recognised certifications.
36
Heavy Duty Industrial & Marine
Weatherproof & Heavy Duty –
Area Classification
Operating Temperature
Ingress Protection
Material
Entries
Weight
Options
Break Glass Call Point |
Model dependant - refer to datasheet
-55°C to +55°C
IP66 & 67
Corrosion-free GRP
2 x 20mm
0.5kg
Body colour, LED, lift flap, series & EOL resistors,
tag & duty labels.
Weatherproof & Heavy Duty –10
Area Classification
Operating Temperature
Ingress Protection
Material
Entries
Weight
Options
Joule Flashing Xenon |
XB13
Weatherproof.
-55°C to +70°C
IP66 & 67
Corrosion-free GRP body, Polycarbonate lens
Up to 3 x 20mm via knockouts
1.1kg
Body & lens colour, tag & duty labels, lens guard,
telephone & relay initiate, single & dual flash mode,
voltages 12-24V d.c., 115-230V a.c.
Weatherproof & Heavy Duty –
Area Classification
Operating Temperature
Ingress Protection
Material
Entries
Weight
No. of Tones
Options
BG3W
110dB(A) Sounder |
DB12
Weatherproof.
-55°C to +70°C
IP66 & 67
Corrosion-free GRP
Up to 3 x 20mm via knockouts
1kg d.c 1.2kg a.c.
27
Body colour, tag & duty labels, voltages 12V & 24V d.c.
Sales Enq. UK: +44 (0)1773 864 100 Sales Enq. USA: +1 (713) 937- 9772 E-Mail: [email protected] Web: www.coopermedc.com 37
Heavy Duty Industrial & Marine
DB15 | 117dB(A) Sounder – Weatherproof & Heavy Duty
Area Classification
Operating Temperature
Ingress Protection
Material
Entries
Weight
No. of Tones
Options
Weatherproof.
-55°C to +70°C
IP66 & 67
Corrosion-free GRP
2 x 20mm
2.6kg
27 + 5 programmable
Painted grey, tag & duty labels, two stage alarm
(DB15P) version, earth continuity, EOL resistor,
voltages 12-48V d.c., *110-254V a.c.
DB15P not available as a.c. version.
DB14 | 15 Watt Loudspeaker – Weatherproof & Heavy Duty
Area Classification
Ambient Operating Temperature
Ingress Protection
Material
Output
Entries
Weight
Tappings
Options
38
Weatherproof.
-55°C to +70°C
IP66 & 67
Corrosion-free GRP
107 dBA at 1W at 1 metre
117 dBA at 15W at 1 metre
2 x 20mm
2.6kg
15, 7.5, 5, 4, 2, 0.8
Painted grey, tag & duty labels, transformer voltage,
BS 5839, part 8 compliance, earth continuity
Cable Glands / Accessories
Complete termination solutions for cable applications
meeting international standards.
Ease of cable termination providing labour and time
management productivity.
Explosion-protected connections contributing to safe
operation in harsh & hazardous environments.
Sales Enq. UK: +44 (0)1773 864 100 Sales Enq. USA: +1 (713) 937- 9772 E-Mail: [email protected] Web: www.coopermedc.com 39
Cable Glands / Accessories
ADE 1F | Non-armoured Gland
Certification
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Gland Size
Thread Range
Cable Type
Options
ATEX, IECEx, UL, CEPEL, GOST R, Lloyds, ABS, DNV
Class 1 Zone 2
-60°C to 100°C
NEMA 4X, IP66, IP67 & IP68 with additional sealing washers
Nickel-Plated Brass (Standard)
4 to 16
M16 to M110 or 1/4” to 31/2” NPT
Non-armoured, armoured and tray cable (does not
terminate the armour)
Stainless Steel 316L, Bronze, Aluminium
1 Function - Inner Sealing Flameproof
ADE 1FC | Non-armoured Barrier Gland with Compound
Certification
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Gland Size
Thread Range
Cable Type
Options
ATEX, IECEx, UL, CEPEL, GOST R, Lloyds, ABS, DNV
Class 1 Zone 2
-60°C to 80°C
NEMA 4X, IP66, IP67 & IP68
Nickel-Plated Brass (Standard)
4 to 11
M16 to M63 or 3/8” to 2”NPT
Non-armoured, armoured and tray cable (does not
terminate the armour)
Stainless Steel 316L, Bronze, Aluminium
1 Function - Inner Sealing Flameproof
ADE 1FLC | Non-armoured Barrier Gland with Liquid Compound
Certification
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Gland Size
Thread Range
Cable Type
Options
ATEX, IECEx, CEPEL, GOST R, Lloyds, DNV
Class 1 Zone 2
-60°C to 80°C
NEMA 4X, IP66, IP67 & IP68
Nickel-Plated Brass (Standard)
4 to 7
M16 to M63 or 3/8” to 3/4” NPT
Non-armoured, armoured and tray cable (does not
terminate the armour)
Stainless Steel 316L, Bronze, Aluminium
1 Function - Inner Sealing Flameproof
40
Armoured Gland
Certification
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Gland Size
Thread Range
Cable Type
Options
| ADE 4F
ATEX, IECEx, UL, CEPEL, GOST R, Lloyds, ABS, DNV
Class 1 Zone 2
-60°C to 100°C
NEMA 4X, IP66, IP67 & IP68
Nickel-Plated Brass (Standard)
5 to 17
M12 to M110 or 1/4” to 4”NPT
Steel wire armoured, steel wire braided, steel tape
armoured, braided marine shipboard and lead
sheathed (with addition of earthing washer)
Stainless Steel 316L, Bronze, Aluminium
4 Functions - Inner Sealing Flameproof + Outersealing IP, Mechanical Retention,
Electrical Continuity
Armoured Gland
Certification
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Gland Size
Thread Range
Cable Type
Options
| ADE 6F
ATEX, IECEx, UL, CEPEL, GOST R, Lloyds, ABS, DNV
Class 1 Zone 2
-60°C to 100°C
NEMA 4X, IP66, IP67 & IP68
Nickel-Plated Brass (Standard)
5 to 11
M16 to M50 or 3/8” to 2”NPT
Steel wire armoured, steel wire braided, steel tape
armoured and braided marine shipboard.
Stainless Steel 316L, Bronze, Aluminium
6 Functions - Inner Sealing Flameproof + Outersealing IP, Mechanical Retention,
Electrical Continuity + Armour Clamping, Deluge Proof
A Series
| Cable Gland Accessories
Lock Nut
Sealing Washer
Earth Tag
Lock Washer
Shroud
Clamping Module
Earthing Washer
Adapters/Reducers
Nickel-Plated Brass
Neoprene
Nickel-Plated Brass
Stainless Steel 316L
PVC
Nickel-plated brass body with stainless steel screws
and washers
Nickel-Plated Brass
Nickel-Plated Brass
Products for all ADE Series
Sales Enq. UK: +44 (0)1773 864 100 Sales Enq. USA: +1 (713) 937- 9772 E-Mail: [email protected] Web: www.coopermedc.com 41
Cable Glands / Accessories
PLUGS | Threaded Plugs
Certification
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Gland Size
Thread Range
Cable Type
Options
ATEX, IECEx, CEPEL, GOST R
Class 1 Zone 2
-60°C to 100°C
IP54/68 with additional sealing washers
Nickel-Plated Brass (Standard)
M12 to M110 or 3/8” to 4”NPT
ISO / NPT others thread on request
None
Stainless steel 316L, Bronze, Aluminium, and other
material on request
ACCESSORIES | Thread Reducers, Adapters, Enlargers
Certification
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Gland Size
Thread Range
Cable Type
Options
ATEX, IECEx, CEPEL, GOST R
Class 1 Zone 2
-60°C to 100°C
IP54/68 with additional sealing washers
Nickel-Plated Brass (Standard)
M12 to M110 or 3/8” to 4”NPT
ISO / NPT others thread on request
None
Stainless steel 316L, Bronze, Aluminium, and other
material on request
Dimensions for all Glands and Accessories are available on request
42
© BP p.l.c
North American
Certified Products
This section includes products which are internationally
approved within North America.
Sales Enq. UK: +44 (0)1773 864 100 Sales Enq. USA: +1 (713) 937- 9772 E-Mail: [email protected] Web: www.coopermedc.com 43
North American Certified Products
SM87PB UL | Push Button Fire Alarm Call Point – Explosionproof & Weatherproof
North American Certifications
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Entries
Weight
Options
UL, ULC, CSA, Class I, Div 1, Groups C & D, Class I, Zone 1, IECEx
Model dependant - refer to datasheet
-67°F to +158°F
-55°C to +70°C
NEMA 4x & 6
IP66 & 67
Marine Grade Alloy
Up to 4 x ½" or ¾" NPT
5.5lb/2.5kg
Body color, tag & duty labels, LED, series or EOL
resistor, diode, addressable module, certification
BG UL | Break Glass Fire Alarm Call Point – Hazardous Locations
North American Certifications
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Entries
Weight
Options
Standard models stocked in U.S.
- contact the U.S. sales office
Standard models.
Available ex-stock.
UL, Class I, Div 2, Groups A ,B, C & D, Class I, Zone 2
Model dependant - refer to datasheet
-13°F to +131°F
-25°C to +55°C
NEMA 4x & 6
IP66 & 67
Corrosion-free GRP
Up to 4 x ½" NPT
2.6lb/1.2kg
Body color, tag & duty labels, LED, liftflap, series or
EOL resistor, plastic element, single or double pole
switch, certification
Ordering Code
PX869101
Product description
BGUL4C6C1DSN6R
PB UL | Push Button Fire Alarm Call Point – Hazardous Locations
North American Certifications
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Entries
Weight
Options
Standard models stocked in U
S
U.S.
- contact the U.S. sales office
Standard models.
Available ex-stock.
UL, CSA, Class I, Div 2, Groups A ,B, C & D, Class I,
Zone 2
Model dependant - refer to datasheet
-13°F to +131°F
-25°C to +55°C
NEMA 4x & 6
IP66 & 67
Corrosion-free GRP
Up to 4 x ½" NPT
2.6lb/1.2kg
Body color, tag & duty labels, LED, series or EOL
resistor, single or double pole switch, certification
Ordering Code
PX869105
Product description
PBUL4C6C0DSN7R
SL15 UL | Status Lights – Explosionproof & Weatherproof
Certification
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Entries
No. of Ways
Options
UL Version
44
UL, ATEX, and IECEx Approved
Model dependant - refer to datasheet
-55°C to +70°C
IP66 & 67
Corrosion-free GRP
Up to 2 x ½" or 2 x ¾" entries. ATEX has M20 or M25.
Up to 4
Various flash rates available for xenon units. Various
lens colours. Optional cast or wire lens guard.
Explosionproof & Weatherproof – Xenon, Filament & Fluorescent Status Lights
North American Certifications
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Entries
No. of Lights
Options
| SM87SL UL
UL, CSA, Class I, Div 1, Groups C & D, Class I, Zone 1,
AExd IIB T4, T6, IECEx
Model dependant - refer to datasheet
-13°F to +131°F
-25°C to +55°C*
NEMA 4x & 6
IP66 & 67
Alloy
Up to 3 x ½" or ¾" NPT
2,3, 4 or 5
Body & lens colour, tag & duty labels, certification,
voltages 24-48V d.c., 110-254V a.c.
*Model dependant, refer to data sheet.
Hazardous Locations – Xenon & Filament Status Lights
North American Certifications
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Entries
No. of Lights
Options
UL, Class I, Div 2, Groups C & D, Class 1,
Zones 1 & 2, AExd IIB T4, IECEx
Model dependant - refer to datasheet
-67°F to +158°F
-55°C to +70°C
NEMA 4x & 6
IP66 & 67
Corrosion-free GRP
1 x ½" NPT
2,3,4, or 5
Body & lens color, tag & duty labels.
Hazardous Locations – Xenon & Filament Status Lights
North American Certifications
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Entries
No. of Lights
Options
| XB11SL UL
| XB12SL UL
UL, Class I, Div 2, Groups C & D, Class I,
Zones 1 & 2, AExd IIB T4, T5, IECEx
Model dependant - refer to datasheet
-67°F to+158°F
-55°C to +70°C
NEMA 4x & 6
IP66 & 67
Corrosion-free GRP
1 x ½" NPT
2, 3, 4 or 5
Body & lens color, tag & duty labels, certification,
voltages 24V d.c., 110-254V a.c.
Sales Enq. UK: +44 (0)1773 864 100 Sales Enq. USA: +1 (713) 937- 9772 E-Mail: [email protected] Web: www.coopermedc.com 45
North American Certified Products
SM87 HXB UL | 5 Joule Xenon Strobe – Explosionproof & Weatherproof
North American Certifications
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Entries
Weight
Options
UL, CSA, Class I, Div 1, Groups C & D,
Class I, Zone 1, AExd IIB, IECEx
Model dependant - refer to datasheet
-67°F to +158°F
-55°C to +70°C
NEMA 4x & 6
IP66 & 67
Alloy
Up to 4 x ½" or ¾" NPT
4.4lb/2.0kg approx
Body & lens color, tag & duty labels,certification, lens
guard, flash rate, voltages 24-48V d.c.,110-254V a.c.,
high temp version up to 185°F/85°C
Standard model stocked in U.S. - contact the U.S. sales office
XB11 UL | 5 Joule Xenon Strobe – Hazardous Locations
North American Certifications
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Entries
Weight
Options
UL, Class I, Div 2, Groups C & D,
Class I, Zones 1 & 2, AExd IIB T5, IECEx
Model dependant - refer to datasheet
-67°F to +158°F
-55°C to +70°C
NEMA 4x & 6
IP66 & 67
Corrosion-free GRP
2 x ½" NPT
5 ½ lb 2.5kg
Body & lens color, tag & duty labels, lens guard,
flash rate, certification, mounting method. voltages
24V d.c., 110-254V a.c,
Standard model stocked in U.S. - contact the U.S. sales office
Standard models.
Available ex-stock.
Ordering Code
PX869174
Product description
XB11UL02406CNBNNNR
XB16 UL | 10 Joule Flashing Xenon – Hazardous & Ordinary Locations
North American Certifications
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Entries
Weight
Options
UL 1971 compliant*, Class I, Div 2, Groups A-D
Class II, Div 2, Groups F & G, IECEx
Model dependant - refer to datasheet
-67°F to +158°F
-55°C to +70°C
NEMA 4x & 6
IP66 & 67
Corrosion-free GRP
Standard 1 x ¾" NPT
2.2lb/1kg
Body & lens color, lens guard, tag & duty labels,
initiation options, flash rate, voltages 24-48V d.c.,
110-254V a.c.
Standard model stocked in U.S. - contact the U.S. sales office
Standard models.
Available ex-stock.
46
Ordering Code
PX869407
Product description
XB16UL12060RYNN
* UL1971 version only
available with
clear lens option
Hazardous & Ordinary Locations – 15
North American Certifications
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Entries
Direct Mount
Pipe Mount
Weight
Options
Hazardous Locations – 21
North American Certifications
Area Classification
Certified Ambient Temperature
Ingress Protection
Material
Entries
Weight
Options
Joule Flashing Xenon
UL, ULC, Class I, Div 2, Groups A, B, C, D
Class II, Div 2, Groups F&G,
Class I, Zone I, AExd IIC T4, T5, T6, IECEx
Model dependant - refer to datasheet
-67°F to +158°F
-55°C to +70°C
NEMA 4x & 6
IP66 & 67
Corrosion-free GRP
Up to 3 x ½” NPT or 3 x ¾” NPT
Pipe mount =1 x ½” or 1 x ¾” NPT
5 ¾lb/2.6kg Pipe Mount
6 ½lb/3.0kg Direct Mount
Body & lens color, relay initiate, flash rate, voltages
24-48V d.c., 110-254V a.c.
Joule Xenon Strobe
Area Classification
Certified Temperature
Ingress Protection
Material
Entries
Weight
Options
| XB12 UL
UL, Class I, Div 2, Groups C & D,
Class I, Zones 1 & 2, AExd IIB T4, T5, IECEx
Model dependant - refer to datasheet
-67°F to +158°F
-55°C to +70°C
NEMA 4x & 6
IP66 & 67
Corrosion-free GRP
Up to 2 x ½" NPT
15.5lb/7.0kg
Body & lens color, tag & duty labels, lens guard, flash
rate, certification, mounting method voltages 24V
d.c., 110-254V a.c.
Explosionproof & Weatherproof – 21
North American Certifications
| XB15 UL
Joule Xenon Strobe
| XB4 UL
UL, Class I, Div 1, Groups C & D,
Class I, Zone 1, AExd IIB T4, IECEx
Model dependant - refer to datasheet
-67°F to +158°F
-55°C to +70°C
NEMA 4x & 6
IP66 & 67
Alloy or Stainless Steel
Up to 3 x ½" or ¾" NPT
14.5lb/6.6kg LM Alloy
Body & lens color, tag & duty labels, lens guard, flash
rate, certification, voltages 24V d.c., 110V & 240V a.c.
Sales Enq. UK: +44 (0)1773 864 100 Sales Enq. USA: +1 (713) 937- 9772 E-Mail: [email protected] Web: www.coopermedc.com 47
North American Certified Products
SM87 LU3 UL | LU3 UL 10 Watt Steady Filament Light – Explosionproof & Weatherproof
North American Certifications
Area Classification
Certified Temperature
Ingress Protection
Material
Entries
Weight
Options
UL, CSA, Class I, Div 1, Groups C & D,
Class I, Zone 1, AExd IIB, IECEx
Model dependant - refer to datasheet
-67°F to +131°F
-55°C to +55°C
NEMA 4x & 6
IP66 & 67
Alloy
2 x ½" or ¾" NPT
4.4lb/2.0kg
Body & lens colour, tag & duty labels, lens guard,
certification, voltages 12, 24, 48V d.c., 110V-254V a.c.
Standard model stocked in U.S. - contact the U.S. sales office
FB11 UL | 10 Watt Steady Filament Light – Hazardous Locations
North American Certifications
Area Classification
Certified Temperature
Ingress Protection
Material
Entries
Weight
Options
UL, Class I, Div 2, Groups C & D,
Class I, Zone 1, AExd IIB T4, T5, IECEx
Model dependant - refer to datasheet
*-67°F to +131°F
-55°C to +55°C
NEMA 4x & 6
IP66 & 67
Corrosion-free GRP
Up to 2 x ½" NPT
6.2lb/2.8kg
Body & lens color, tag & duty labels, lens guard,
mounting method, certification, voltage 24, 48V d.c.,
110 – 120V a.c.
*Model dependant
FB12 UL | 60/100 Watt Steady Filament Light – Hazardous Locations
North American Certifications
Area Classification
Certified Temperature
Ingress Protection
Material
Entries
Weight
Options
48
UL, Class I, Div 2, Groups C & D,
Class I, Zone 1, AExd IIB T4, T5, IECEx
Model dependant - refer to datasheet
*-67°F to +131°F
-55°C to +55°C
NEMA 4x & 6
IP66 & 67
Corrosion-free GRP
Up to 2 x ½" NPT
16.7lb/7.6kg
Body & lens color, tag & duty labels, lens guard,
mounting method, certification, voltage 120V a.c.
*Model dependant
Hazardous & Ordinary Locations – 60W Steady Filament Light
North American Certifications
Area Classification
Certified Temperature
Ingress Protection
Material
Entries
Weight
Direct Mount
Pipe Mount
Options
| FB15 UL
UL, Class I, Div 2, Groups A,B,C, & D
Class I, Zone 1, AExd IIC T3, T4, IECEx
Model dependant - refer to datasheet
*-67°F to +158°F
-55°C to +70°C
NEMA 4x & 6
IP66 & 67
Corrosion-free GRP / Metal Cover for Pipe Mounted Unit
Up to 3 x ½" NPT or 3 x ¾" NPT
5 ¾lb/2.6kg Pipe Mount
6 ½lb/3.0kg Direct Mount
Body & lens color, lens guard, tag & duty labels, lamp
wattage, unit fixing, mounting method, voltages
24-48V d.c., 110-254V a.c.
*Model dependant
Explosionproof & Weatherproof – 60
North American Certifications
Area Classification
Certified Temperature
Ingress Protection
Material
Entries
Weight
Options
Watt Steady Filament Light | FB4 UL
UL
ATEX, Class I, Div 1, Groups C & D,
Class I, Zone 1, AExd IIB T3, T4, IECEx
Model dependant - refer to datasheet
-67°F to +131°F
-55°C to +55°C
NEMA 4x & 6
IP66 & 67
Alloy
Up to 3 x ½" or 2 x ¾" NPT
*13lb/6.4kg
Body & lens color, tag & duty labels, lens guard, relay
initiate, certification, voltage 24V d.c.,110V a.c.
*Model dependant
Explosionproof & Weatherproof –10
Watt Steady Fluorescent Light | SM87 LU1 UL
North American Certifications
Area Classification
Certified Temperature
Ingress Protection
Material
Entries
Weight
Options
UL, CSA, Class I, Div 1, Groups C & D,
Class I, Zone 1, AExd IIB, IECEx
Model dependant - refer to datasheet
-67°F to +131°F
-55°C to +55°C
NEMA 4x & 6
IP66 & 67
Alloy
2 x ½" or ¾" NPT
4.4lb/2.0kg
Body & lens colour, tag & duty labels, lens guard,
certification, voltages 24-48V d.c. 220V-254V a.c.
Sales Enq. UK: +44 (0)1773 864 100 Sales Enq. USA: +1 (713) 937- 9772 E-Mail: [email protected] Web: www.coopermedc.com 49
North American Certified Products
FL4 UL | 13-39 Watt Steady Fluorescent Light – Explosionproof & Weatherproof
North American Certifications
Area Classification
Certified Temperature
Ingress Protection
Material
Entries
Weight
Options
UL, Class I, Div 1, Groups C & D,
Class I, Zone 1, AExd IIC T5, IECEx
Model dependant - refer to datasheet
-4°F to +131°F
-20°C to +55°C
NEMA 4x & 6
IP66 & 67
Alloy
Up to 3 x ½" NPT or 3 x ¾" NPT
*14.5lb/6.6kg
Body & lens color, tag & duty labels, lens guard,
relay initiate, certification, voltages 24V d.c., 110V,
240V a.c.
*Model dependant
DB5 FM UL | FM Up to 93dB(A) @ 10ft Horn – Intrinsically Safe
North American Certifications
Area Classification
Certified Temperature
Ingress Protection
Material
Entries
Weight
No. of Tones
Options
UL, FM, CSA, Class I, Div 1 & 2, Groups A,B,C & D, IECEx
Model dependant - refer to datasheet
-4°F to +131°F
-20°C to +55°C
NEMA 4
IP65
Corrosion-free ABS
Up to 2 x 13/16" via knockouts
0.7lb/0.3kg
26
Body color, label, certification, voltages 12V-24V d.c.
Standard models stocked in U.S. – contact the U.S. sales office.
DB1HP UL | 103dB(A) @ 10ft Horn – Explosionproof & Weatherproof
North American Certifications
Area Classification
Certified Temperature
Ingress Protection
Material
Entries
Weight
No. of Tones
Options
UL, Class I, Div 1, Groups C & D, Class I, Zone 1, IECEx
Model dependant - refer to datasheet
-13°F to +158°F
-25°C to +70°C
NEMA 4x
IP66
Alloy
Up to 3 x ½ " or ¾" NPT
7.7lb/3.5kg (model dependant)
27 + 5 Programmable
Body color, tag & duty labels, certification,
voltages 12,24,48V d.c., 110V a.c.
Standard models stocked in U.S. – contact the U.S. sales office.
50
Hazardous Locations –115dB(A)
North American Certifications
Area Classification
Certified Temperature
Ingress Protection
Material
Entries
Weight
No. of Tones
Options
@ 1m Horn
| DB3 UL
UL, ULC, Class I, Div 2, Groups A,B,C & D
Class II, Div 2, Groups F & G
Class I, Zones 1 & 2, AExd IIC T4, IECEx
Model dependant - refer to datasheet
-67°F to +158°F
-55°C to +70°C
NEMA 4x & 6
IP65 & 67
Corrosion-free GRP
Up to 2 x ½" NPT
11lb/5.0kg
27 + 5 Programmable
Body color, tag & duty labels, end of line resistor,
certification, voltages 12-48V d.c., 110V-254V a.c.
Standard model stocked in U.S. – contact the U.S. sales office.
Standard models.
Available ex-stock.
Ordering Code
PX869131
Hazardous Locations – 8-25
North American Certifications
Area Classification
Certified Temperature
Ingress Protection
Material
Entries
Weight
Output
Options
Hazardous Locations – 30
North American Certifications
Area Classification
Certified Temperature
Ingress Protection
Material
*Output
Entries
Weight
Tappings @ 30 Watts
Options
Product description
DB3UL048N2CNRZ
Watt Loudspeaker
| DB4 UL
UL, Class I, Div 2, Groups A,B,C & D,
Class I, Zone 1, AExd IIC T4, IECEx
Model dependant - refer to datasheet
-67°F to +158°F
-55°C to +70°C
NEMA 4x & 6
IP66 & 67
Corrosion-free GRP
Up to 2 x ½” NPT
11lb/5.0kg
97 dBA at 1W at 10 feet
109 dBA at 25W at 10 feet
Body color, tag & duty labels, transformer,
certification, power 25W, 15W, 8W
Watt Loudspeaker
| DB16 UL
UL, Class I, Div 2, Groups C & D/A-D
Class I, Zone 1, AExde IIB T3/IIC T110°C
Model dependant - refer to datasheet
-61°F to +90°F
-50°C to + 40°C
NEMA 4x & 6
IP66 & 67
Corrosion-free GRP
Groups C & D: 100dBA at 1Watt at 10 feet
112dBA at 30 Watts at 10 feet
Groups A-D:
3dBA less than C & D versions
Up to 2 x ½" NPT or 2 x ¾" NPT
12.1lb/5.5kg
30, 25, 12, 6, 4, 2
Body color, transformer, tag & duty labels.
*See data sheet for additional output.
Sales Enq. UK: +44 (0)1773 864 100 Sales Enq. USA: +1 (713) 937- 9772 E-Mail: [email protected] Web: www.coopermedc.com 51
North American Certified Products
GHG 41181 UL | Control Units – Hazardous Locations
North American Certifications
Area Classification
Certified Temperature
Ingress Protection
Material
Entries
Weight
Options
UL, Class I, Div 2, Groups A,B,C & D
Class I, Zone 1, AExde IIB+H2 T6
Class II, Div 1, Groups E,F&G(cUL)
Model dependant - refer to datasheet
-4°F to + 104°F
-20°C to +40°C
NEMA 4x & 6, IP65 & 66
Impact Resistant Thermo Plastic
1 x ½" NPT as standard
0.5kg - 1.3kg
Pushbuttons, emergency stop, padlockable, contact
block, rotary switches & block, potentiometer, lamps
GHG 41182 UL | Control Units – Hazardous Locations
North American Certifications
Area Classification
Certified Temperature
Ingress Protection
Material
Entries
Weight
Options
UL,
ATEX, Class I, Div 2, Groups A,B,C & D
Class I, Zone 1, AExde IIB+H2 T6
Class II, Div 1, Groups E,F&G(cUL)
Model dependant - refer to datasheet
-4°F to + 104°F
-20°C to +40°C
NEMA 4x & 6, IP65 & 66
Impact Resistant Thermo Plastic
1 x ½" NPT as standard
0.5kg - 1.3kg
Pushbuttons, emergency stop, padlockable, contact
block, rotary switches & block, potentiometer, lamps
GHG 41183 UL | Control Units – Hazardous Locations
North American Certifications
Area Classification
Certified Temperature
Ingress Protection
Material
Entries
Weight
Options
*Model dependant
52
UL, Class I, Div 2, Groups A,B,C & D
Class I, Zone 1, AExde IIB+H2 T6
Class II, Div 1, Groups E,F&G(cUL)
Model dependant - refer to datasheet
-4°F to + 104°F
-20°C to +40°C
NEMA 4x & 6, IP65 & 66*
Impact Resistant Thermo Plastic
1 x ½" NPT as standard
0.5kg - 1.3kg
Pushbuttons, emergency stop, padlockable, contact
block, rotary switches & block, potentiometer, lamps
EExed & Weatherproof
North American Certification
Area Classification
| 432 434 Range
UL
ATEX,
Class I, Zone 1, AExde IIB+H2 T6
Class II, Div 1, Groups E,F&G(cUL)
-4°F to + 104°F
-20°C to +40°C
NEMA 4x & 6, IP65 & 66*
Impact Resistant Themo Plastic
2 x ½" NPT as standard
1.75lbs–3.5lbs / 0.8kg–1.6kg
Pushbuttons, emergency stop, padlockable, contact
block, rotary switches & block, potentiometer, lamps.
Certified Ambient Temperature
Ingress Protection
Material
Entries
Weight
Options
*Model dependant
Explosionproof & Weatherproof – GRP
North American Certifications
Area Classification
Certified Temperature
Ingress Protection
Material
Entries
Weight
Options
Junction Boxes
UL
Class I, Div 2, Groups A,B,C & D
Class I, Zone 1, AExe IIC T4, T5
Model dependant - refer to datasheet
-67°F to +131°F
-55°C to +55°C
NEMA 4x & 6, IP66 & 67
Corrosion-free GRP
Up to 8 entries (model dependant)
2.4-4lbs/1.1kg-1.8kg
Body color, tag label, gland continuity, extra internal
earth, terminal type
Hazardous Locations – Terminal Boxes & Control Units
North American Certifications
Increased Safety
Area Classification
Ingress Protection
Material
Box Type
444 23
448 23
449 23
471 23
444 33
448 33
449 33
447 33
Box Type
744 01
745 02
746 02
749 04
744 21
745 22
146 23
749 24
| JB10 & JB11 UL
A range of GRP Terminal
Boxes and Control Units.
The Control Units can be
fitted with a variety of lamps,
switches, pushbuttons and
other accessories.
| GHG 74 & 44 UL
UL
Class I, Div 2, Groups A,B,C & D
Class I, Zone 1, Groups A,B,C & D
Class II, Div 1, Groups E, F & G
AExde IIC T4, T6*
Model dependant - refer to datasheet
IP65/66*
Corrosion-free GRP or
316 Stainless Steel
Dimensions (mm):
Width x Height x Depth*
271
134
136
271
271
136
544
271
136
817
271
136
175
312.5
151
312.5
312.5
151
312.5
312.5
151
941.5
312.5
151
*Model dependant
All specifications, dimensions, weights and tolerances are nominal
(typical) and MEDC reserve the right to vary all data without prior
notice. No liability is accepted for any consequence of use.
Sales Enq. UK: +44 (0)1773 864 100 Sales Enq. USA: +1 (713) 937- 9772 E-Mail: [email protected] Web: www.coopermedc.com 53
New Express Service
New
Express Service
Cooper MEDC is proud to announce the launch of our
new Express Service for the XB15.
As a direct result of customer feedback the Cooper MEDC
Express Service has been developed to meet the
increasing demand for reduced lead time for customized
products.
Our Express Service helps customers meet tighter
deadlines with more flexibility, conforming to your
specification at a moment’s notice.
This is another step forward for Cooper MEDC helping
you get what you need, when you need it, as an extension
to the quality and service our customers have come to
expect.
XB15
U.K. Manufactured
U.S.A Manufactured
ATEX
UL
5 Working Days
2 Working Days
Up to 15 Units
per Configuration
Up to 15 Units
per Configuration
Mounting
Direct Mount, With or
Without a Backstrap.
Pipe Mount
Voltages
24V d.c., 48V d.c.,
230V a.c. and 240V a.c.
24V d.c. or 120V a.c.
Lens Colour
Red, Blue, Amber or Yellow
Red, Blue, Amber or Clear
Body Colour
Natural Black or Red
(Red Body Only Available
With Red Lens)
Natural Black
Lens Guard
None, Wire
None, Cast or Wire
Tag Label Option
(Please specify wording)
Tag Label Option
(Please specify wording)
Certification
From Point Order shipped within
Order Quantities
Tags
54
Cooper MEDC World-wide
Cooper MEDC
Expert in hazardous area applications.
ɀ Over 30 years commitment to design and development.
ɀ Full in house manufacturing capability.
ɀ Quality Assurance to ISO 9001, Environmental Management
ISO 14001 & Occupational Health & Safety
OHSAS 18001
ɀ Leader in GRP products for hazardous areas.
ɀ 2 year warranty.
ɀ Ex-stock to 4 weeks delivery.
Cooper MEDC Worldwide
Regional Offices
Distributors
End users
Sales Enq. UK: +44 (0)1773 864 100 Sales Enq. USA: +1 (713) 937- 9772 E-Mail: [email protected] Web: www.coopermedc.com 55
Cooper MEDC Limited
Colliery Road
Pinxton, Nottingham
NG16 6JF
Cooper MEDC (USA)
3413 North Sam Houston
Parkway West
Houston, TX 77086, USA
T: +44 (0)1773 864 100
F: +44 (0)1773 582 800
www.coopermedc.com
T: +1 (713)937 9772
F: +1 (713)937 9773
The trade names and brand names contained herein are valuble trademarks of Cooper Industries in the U.S. and other countries. You are not permitted to use the Cooper Trademarks
without the prior written consent of Cooper Industries.
Cooper Industries plc
600 Travis, Suite 5600
Houston, TX 77002-1001
T: 713-209-8400
www.cooperindustries.com
PXMKPR003
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement