Master Catalog 2013 - design :: production :: audio

Master Catalog 2013 - design :: production :: audio
Master Catalog 2013
Quality Products Since 1971
Introduction............................................................................................................................. 2-3
Transmitters and Accessories............................................................................................. 6-12
SM Series, RM, RM2, HH, HM, UM400a, LMa, MM400c, WM
Microphones, Accessories & Parts................................................................................... 14-17
Portable Receivers & Accessories....................................................................................20-28
SRb Series, Octopack, Quadpack, UCR411a, UCR401, UCR100
Digital Wireless & Accessories.........................................................................................30-31
D4T, D4R
Studio Receivers & Accessories.......................................................................................34-37
Venue, VRS, VRT, R400A
Remote Antennas, RF Amplifiers & Accessories............................................................38-41
ALP Series, SNA600, PCA900, UFM230, UFM50, PF50, PF25
IFB System & Accessories.................................................................................................44-45
IFBR1a, IFBT4
ASPEN Series Digital Audio Components, Accessories & Cables................................48-55
SPN2412, SPN1624, SPN1612, SPN812, SPN32i, SPN16i, SPNTrio, SPNConference, Dante
DM Series Digital Audio Components, Accessories & Cables......................................56-60
DM1624F, DM1612F, DM812, DM84, DMTH4, DMPA12
Analog Audio Components, Accessories & Cables........................................................62-63
PA8, XLR8
Systems/Packages.............................................................................................................66-68
TM400, IS400
Reference............................................................................................................................. 69-72
www.lectrosonics.com
©Copyright 2013. Lectrosonics, Inc.
1
Made In The USA By A Bunch Of Fanatics
Introduction to Lectrosonics
F
or more than 40 years, the fanatics at Lectrosonics
have held the philosophy and business plan to: “Build
the best product we know how to make, and support it
with the best service we can possibly provide.” The company
was founded in 1971 in Albuquerque, New Mexico with
the Voice Projector product line. In the mid-1970s, the first
wireless microphone was added to the product line under the
Freedomike® trademark. Following that, he “Mouse Years”
lasted a little over two decades, beginning in the late 1970’s.
The products caught on in New York City and San Francisco
where street musicians needed the portability and economy
of rechargeable battery power. In New York, every music
store along 48th street stocked the products and within a few
years thousands of them could be found all over Manhattan.
The last production run of Maxi Mouse took place on
September 25, 2000.
With new management in August of 1981 under the
leadership of John Arasim, an emphasis on mechanical
engineering and manufacturing capabilities ushered in the
beginning of a new era in wireless microphone development.
Machining capability opened up new possibilities and new
machined aluminum housings were designed to improve
the ruggedness and appeal of the product line. Portable PA
systems with built in wireless microphone systems began
with the VP300 in the early 1980’s, followed by the Long
Ranger a few years later. Being ideally suited to outdoor
use, markets and dealer networks were quickly developed to
serve auctioneers and marching band directors.
As other electronics manufacturers were moving off-shore,
Lectrosonics stayed here at home as the importance
of being made in the USA began to grow. Customers
appreciated the fact that they could call the factory directly
to discuss any issues they had with the products. This direct
feedback was invaluable to the company, and the responsive
attitude led to changes in the product designs accordingly.
As a result, the infectious sense of ownership in the products
within the staff was shared by dealers and customers.
By the summer of 1988, several new products had proven
successful and new markets had been entered and the plant
was moved to Rio Rancho, 15 miles north of the original
location. The television broadcast market eagerly adopted
the new plug-on transmitter and compact receiver for ENG
and documentary production, and sales were growing
quickly. Engineering had begun working on audio processing
equipment targeted at the sound contracting and audio
visual markets. It was an exciting time and enthusiasm ran
high.
Time to air was faster for broadcasters and ENG crews using
wireless and the station that aired the story first captured
1971
1979
1988
1994
Company founded in
Albuquerque, New Mexico
USA. First products:
Voice Projectors and
amplified lecterns
Mouse® product line starts
rolling
Company moves to
Rio Rancho, NM.
VHF compact system CR185, H185
LecNet products
2
©Copyright 2013. Lectrosonics, Inc.
LECTROSONICS, INC.
Quality Products Since 1971
the largest audience. The plug-on transmitter let them
use their familiar microphones, and the compact receiver
could be mounted directly on the video camera. Initially,
the company was not aware of how much overlap existed
between television and motion picture production. News
and documentaries were one type of field production,
while motion picture and television series production often
took place in studios or at least in controlled environments.
We learned that even though the production techniques
were different, the equipment was often the same, and
many of our customers worked in both fields. The reliability
of the first compact VHF system granted us access into
the motion picture production market. Dropouts were
almost non-existent, and the audio quality was good
enough for the finished sound track.
The first audio processing product was the MAP (Modular
Audio Processor) system, introduced in 1989. It was a
card cage design with a variety of automatic mixing, signal
processing and logic control modules that allowed the
sound system designer to customize the hardware for
each installation.
The years from 1995 through 2002 saw modest growth,
but an expansion of production equipment in the factory
and increased engineering efforts to develop new
products. The wireless IFB system was introduced in 1998,
and became a workhorse product in broadcast and film
markets. In 2002 the fruits of several years of engineering
effort began to appear. The Digital Hybrid Wireless® system
and DM Series processors were introduced. Other new
products in development for a number of years were steadily
released into production.
In the most recent decade, variable power miniature
transmitters, encrypted digital wireless systems, and pure
digital wireless systems have been developed for use in
field production and live sound. A significant engineering
effort developed the ASPEN family of advanced digital audio
processors that were introduced in 2009. ASPEN (Audio
Signal Processing Expansion Network) delivers leading
edge technology with a massive digital matrix, IP and serial
connectivity, a comprehensive macro programming language
and versatile control interfaces.
The fanatics at Lectrosonics are on the verge of several new
and ground-breaking product developments including digital
wireless, networked audio and tools for field production. As
always, we enjoy hearing from you and hope that you’ll come
to visit us in New Mexico sometime soon for a factory tour
and some green chile.
2002
2005
2009
Digital Hybrid Wireless®
400 Series
SM Transmitter,
DMTH4 DSP Hybrid
ASPEN Series DSP
www.lectrosonics.com
2012
HH Handheld transmitter
©Copyright 2013. Lectrosonics, Inc.
3
Made In The USA By A Bunch Of Fanatics
Teresa
Duran
Fanatic Since 2006
Final Assembly
4
©Copyright 2013. Lectrosonics, Inc.
LECTROSONICS, INC.
Quality Products Since 1971
www.lectrosonics.com
©Copyright 2013. Lectrosonics, Inc.
5
Made In The USA By A Bunch Of Fanatics
SM Series
Transmitters
Super Miniature Transmitters
• Current-servo input for maximum dynamic range
and acceptance of a wide variety of microphone
types
• Ultra-small size, backlit LCD interface and remotecontrol capable (with RM)
• SMV: Variable isolated RF output, smallest size
• SMQV: Variable isolated RF output, dual battery for
extended operational time
• Digital Hybrid Wireless®
for compandor-free audio or compatibility with
analog receivers
The SM Series family brings Digital Hybird Wireless®
technology to super-small transmitters in two different
configurations for essentially any application requiring a
lavaliere or head worn microphone. The tiny size of these
transmitters makes concealment easy, yet with state-of-theart audio and RF performance. The splash-proof and
sweat-proof housings allow reliable operation even in
demanding environments.
The SMV model has a fixed antenna and offers 3 power
levels: 50 mW, 100 mW and 250 mW, depending on the
application. The lower power setting provides longer
battery life while the higher setting gives greater range and
resistance to dropouts.
The SMQV is a dual-AA battery model offering selectable
power of 100mW for extended battery life and 250mW
for extended operating range. A third selection of 50mW
satisfies the requirements in some theatrical applications
where the system design specifies lower power output from
the transmitters.
Setup and control is simplified with membrane switches and
SMQV
SMV
an LCD interface. Multiple functions are clearly marked on
the panel, with on-screen prompts on the LCD as reminders
when another switch must be held or the selection is
locked out.
The innovative servo bias input on the standard 5-pin
connector provides a programmable, regulated voltage
to accommodate a wide variety of electret microphones.
Two bicolor LEDs make adjusting input levels for proper
modulation easy and accurate.
RM, RM2
Remote Controls For All SM Series
& WM Models
20% of normal operation to prolong battery life during long
periods of preparation before a production begins.
The RM2 is a cost-effective alternative, providing remote
adjustment of level, lock, unlock, sleep and unsleep.
LectroRM*
The unique RM provides hands-free remote control for all
SM Series models for frequency and audio gain settings,
and sleep, wake, lock and unlock modes. A “dweedle” tone
generated while holding the RM close to the wireless system
microphone alters the settings and modes of the transmitter,
so changes can be made without disturbing costuming. The
sleep mode drops the transmitter power consumption to
6
©Copyright 2013. Lectrosonics, Inc.
Control your Lectrosonics SM
Transmitter with your phone.
•
Audio Gain
•
Channel
•
Sleep Mode
•
Lock Mode
ANDROID APP ON
*LectroRM is a 3rd party product and not made by Lectrosonics, Inc.
LECTROSONICS, INC.
Quality Products Since 1971
HH
Transmitters
Handheld Transmitter
• Digital Hybrid Wireless® Technology
• Standard thread-on capsules
• Membrane switch and LCD interface
• AA battery power
• Selectable RF power at 50 and 100 mW
• Talkback feature
The HH Digital Hybrid Wireless handheld transmitter
represents an elegant solution for a variety of wireless
microphone applications including live performance,
broadcast, AV rental and houses of worship. The HH
incorporates many advanced features to provide high quality
speech and vocal reinforcement. Along with providing
peerless audio quality with wide frequency response and
dynamic range in native 400 Series mode, the technology
used in the HH includes compatibility modes for Lectrosonics
200 Series, 100 Series and IFB receivers, and some
systems from other top manufacturers. (Contact Lectrosonics
for details.)
Interchangeable Capsules
Lectrosonics offers the HHC cardioid condenser thread-on
capsule. Thread-on capsules from other manufacturers with
a 1.25”/28 thread pitch can also be used.
HM
Digital Hybrid Plug-On Transmitter
• Converts microphones with XLR jacks to wireless
operation
• Backlit LCD and membrane switches for setup
• Selectable 5, 18 and 48 volt phantom power plus off
position for dynamic microphones
• Adjustable low frequency roll-off
• Powered by two AA batteries
• 256 synthesized UHF frequencies
• 100 mW output power
• Rugged machined aluminum housing
The HM Digital Hybrid Wireless® plug-on transmitter features
a DSP-based design that allows the transmitter to operate
in its native Digital Hybrid Wireless® mode, Lectrosonics 200
Series, 100 Series, IFB product groups, plus two modes for
compatibility with analog receivers from other manufacturers.
A unique multi-voltage phantom power feature allows the
transmitter to be used with virtually any microphone, including high-current condenser types, expanding its usefulness
in high-end applications such as motion picture production
and test & measurement.
www.lectrosonics.com
©Copyright 2013. Lectrosonics, Inc.
7
Made In The USA By A Bunch Of Fanatics
MM400c
Transmitters
Water-Resistant Miniature Transmitter
• Waterproof Power/Mute switch (programmable)
• Water-resistant, rugged, machined aluminum
housing with noncorrosive, superhard finish
• 100mW isolated RF output for long range and
minimal interference
• Digital Hybrid Wireless® for compandor-free audio
• Compatibility modes for use with analog receivers
The rugged, water-resistant MM400c offers Digital Hybrid
Wireless® technology in a package that can withstand the
most extreme moisture and temperature environments.
The MM400c is conveniently powered by a single AA battery,
with internal switching power supplies providing constant
voltages to the transmitter circuits from the beginning (1.5
volts) to the end (0.85 volts) of battery life. The 100 mW
output with an RF circulator/isolator in the output stage
provides excellent operating range while virtually eliminating
intermodulation problems common in multi-channel environments.
WM
Water-Resistant Transmitter
• Water resistant, rugged, machined aluminum housing
with noncorrosive, super-hard finish
• Digital Hybrid Wireless™ system for compandor-free
audio
• Selectable RF output power
• 2xAA battery powering
• Membrane switches and backlit LCD interface
• Remote settings with RM
The new, water-tight WM transmitter is based on the SM
Series with Digital Hybrid Wireless® technology for outstanding audio quality with the addition of a special case design
for extreme durability in all environments. The WM features
a backlit LCD, membrane control surface, and 2xAA battery
powering for long operating time. The WM can be set to operate at 50, 100 or 250 mW RF output (25 & 50 mW for EU
version) with an RF circulator/isolator in the output stage for
applications where large channel counts are needed.
8
©Copyright 2013. Lectrosonics, Inc.
LECTROSONICS, INC.
Quality Products Since 1971
LMa
Transmitters
50mW Belt-Pack Transmitter
• Current-servo input for maximum dynamic range and
acceptance of a wide variety of microphone types
• 50mW RF output for good range and interference
resistance
• Digital Hybrid Wireless® for compandor-free audio
• Isolated output
• Compatibility modes for use with analog receivers
• Super-tough metal housing and wire belt clip for durability
The LMa transmitter brings Digital Hybrid Wireless® technology to a moderate cost level while preserving superb
performance and maximum flexibility in a belt pack transmitter for voice or instruments. The LMa is light weight and
made of powder-coated, extruded aluminum for durability
and incorporates a wire belt clip for secure mounting. A
50mW RF output provides plenty of range and resistance to
interference.
The LMa is ideal for use as a musical instrument transmitter
when combined with MI39-type interface cables.
UM400a
100mW Belt-Pack Transmitter
• Current-servo input for maximum dynamic range and
acceptance of a wide variety of microphone types
• 100mW isolated RF output for long range and
minimal interference
• Digital Hybrid Wireless® for compandor-free audio
• Adjustable low-frequency roll-off
• Compatibility modes for use with analog receivers
• Super-tough metal housing and belt clip for durability
The UM400a implements the latest Digital Hybrid Wireless®
technology in a classic Lectrosonics belt-pack transmitter
with a 100mW, isolated RF output. The super-tough extruded, powder-coated housing ensures years of trouble-free
use even in the most demanding applications. The springloaded belt clip provides quick, secure mounting on the talent. The current-servo input amplifier accepts a wide range
of gain from different types of microphones.
www.lectrosonics.com
©Copyright 2013. Lectrosonics, Inc.
9
Made In The USA By A Bunch Of Fanatics
Accessories
10
Transmitters
Part Number:13585
Part Number: 55007
Description: Mic Clip for UT
Handheld Transmitters
Description: Clear AA battery caddy
Part Number: 21359
Part Number: 55008
Description: Plug Cord, Female,
5 Pin TA5F
Description: Blue AA battery caddy
Part Number: 21472
Part Number: A7U
Description: Right angle power cord,
coaxial plug, stripped/tinned leads,
6’ long
Description: UHF Antenna for UM190,
UM195, UM195b, 470-608 MHz
Part Number: 21750
Part Number: ACOAXTX
Description: Polarity-reversing XLR
barrel adapter
Description: Antenna, Coaxial, SMA
Plug for Transmitters, Specify Freq. Block
Part Number: 26481
Part Number: AMJXX
Description: Audio Plug Cover for
MM400 Transmitters
Description: Swivelling whip antenna
with standard SMA connector
(Specify Block)
Part Number: 26486
Part Number: AMJKIT
Description: Replacement Wire Belt
Clip for MM400 watertight transmitters
Description: Swivelling whip antenna kit
with Color Caps
Part Number: 26526
Part Number: AMM KIT
Description: Replacement Wire
Belt Clip for LM Transmitters
Description: Transmitter Antenna Kit
With Color Caps
Part Number: 26862
Part Number: AMM-O
Description: Thumb screw for beltclips
on the SM Series transmitters
Description: Transmitter Antenna
Color Caps
Part Number: 28832
Part Number: AMM (Specify Block)
Description: Replacement set screw
for SM series wire belt clip
(all variations)
Description: Transmitter Antenna for
UHF Belt-pack Unit
Part Number: 35679
Part Number: BATTSLED
Description: Lectrosonics Screwdriver
Description: General purpose battery
adaptor. Optional spring loaded clip is
available. BATTERY NOT INCLUDED
Part Number: 35510
Part Number: BCHINGED
Description: Water/Dust protective boot
for SM series Transmitter and SM5P
Microphone connectors
Description: Hinged Belt Clip Kit for UM
and LM Transmitters
Part Number: 35923
Part Number: BCWIRE
Description: Thermal insulation
pad for SM/SMa Transmitters
Description: Wire Belt Clip Kit for
UM200- and UM400-type Belt-pack units
Part Number: 35924
Part Number: CCHH
Description: Thermal insulation
pad for SMD/SMDa/SMQ/SMQa
Description: Pouch for Handheld
Transmitters
©Copyright 2013. Lectrosonics, Inc.
LECTROSONICS, INC.
Quality Products Since 1971
Transmitters
Accessories
Part Number: CH12
Part Number: MC60
Description: AC Adapter, 115VAC in,
12VDC out for ISO9V Battery Eliminator
Description: Adapter Cable, 37”,Mic
Level, XLRF to TA5F, 5V Bias on XLR
Part Number: HH2SEN
Part Number: MCA5X
Description: HH adapter for capsules
designed for G2, G3 and 2000 Series
Sennheiser®*wireless.
Part Number: HHXTND
Description: Adapter, TA5F to XLRM,
for Lav Mics with Plug-On Transmitters
Description: Extender for mic flag which
allows for access to LCD screen and
talkback button
Description: Universal Barrel Adapter,
5-pin Mic to MM400/b/c Input and WP
Part Number: ISO9VOLT
Part Number: MCATA5MUWP
Description: Isolated Battery Eliminator
Without Door
Description: Universal Mic Cable
Adapter, TA5F To WP
Part Number: ISO9VOLTH
Part Number: MCA-TA5PAD
Description: Isolated Battery Eliminator
with H-Style Battery Door for Plug-on
Transmitters
Description: Mic Cable Adapter, XLRF
to TA5F, -10dB attenuation
Part Number: ISO9VOLTM
Part Number: MCA-TPOWER
Description: Isolated Battery
Eliminator with M-Style Battery Door for
UM Transmitters
Description: Mic Cable Adapter,
T-Power from UH400A, UH200 and
HM Transmitter
Part Number: MC35
Part Number: MCAXLRLINE-WP
Description: Adapter Cable, 37”, Line
Level, XLRF to TA5F
Description: Cable Adapter, XLR to WP
for MM400/b/c, Line Level
Part Number: MC36
Part Number: MCAXLRMIC-WP
Description:Adapter Cable, 37”,
Right-Angle 3.5mm Mono Mini Plug to
Straight 3.5mm Mono Mini Plug
Description: Cable Adapter, XLR to WP
for MM400/b/c, Mic Level
Part Number: MC40
Part Number: MI39ARA
Description: Adapter Cable, 37”, Mic
Level, XLRF to TA5F. Wired for
dynamic mic input to transmitters
Description: Instrument Cable, for
passive pickups, 1/4” Right Angle
to TA5F
Part Number: MC41
Part Number: MI39AST
Description: Adapter Cable, 37”, Mic
Level, XLRF to TA5F. Works with early
5-pin inputs and servo bias inputs.
Description: Instrument Cable, for
passive pickups, 1/4” Straight to TA5F
Part Number: MC44
Part Number: MI33PRA
Description: Adapter Cable, 37”, Male
1/4” Mono Plug to Male Locking Micro
Plug.
Description: Instrument Cable, 1/4”
Right Angle to TA5F, for High-Output
Active Pickups
Part Number: MC46
Part Number: MI33PST
Description: Adapter Cable, 37”, for
Dynamic Microphone, 1/4” Mono to
TA5F
Description: Instrument Cable, Passive,
1/4” Straight to TA5F, for High-Output
Active Pickups
Part Number: MC47
Part Number: MMCABLE
Description: Adapter Cable, 37”,
RCA to TA5F
Description: Batt Cap, Lanyard,
Hardware for All MM Transmitters
www.lectrosonics.com
Part Number: MCABRLTA5MUWP
©Copyright 2013. Lectrosonics, Inc.
11
Made In The USA By A Bunch Of Fanatics
Accessories
12
Transmitters
Part Number: ORINGKIT/WM
Part Number: SMKITTA5
Description: Replacement O-ring kit for
the WM Transmitter.
Description: Connector Kit for
SM-type transmitters, 5-pin TA5F Plug
with Sleeve
Part Number: MUTE
Part Number: SMBCDN
Description: Audio muting switch, belt
mount, for all current 5-pin beltpack
transmitters.
Description: Machined, wire Belt Clip
for single-battery SM transmitters,
Antenna Down
Part Number: PHTRAN2
Part Number: SMBCUP
Description: Cordura Holster,
”H” Series Plug-on transmitters
Description: Machined, wire Belt Clip
for single-battery SM transmitters,
Antenna Up
Part Number: PHTRAN3
Part Number: SMDBC
Description: Leather pouch for HM
plug-on transmitters
Description: Machined, wire Belt Clip
for dual-battery SM Series transmitters,
Antenna Up or Down
Part Number: PSLZRDUAL
Part Number: SMBCDNSL
Description: LZR style plug to LZR
style plug. 6 ft. power cable
Description: Spring-loaded Belt Clip for
single-battery SM Series transmitters,
Antenna Down
Part Number: PSM
Part Number: SMBCUPSL
Description: Leather pouch for SM
single-battery transmitters
Description: Spring-loaded Belt Clip for
single-battery SM Series transmitters,
Antenna Up
Part Number: PSMD
Part Number: SMDBCSL
Description: Leather pouch for SM
dual-battery transmitters
Description: Spring-loaded Belt Clip for
dual-battery SM Series transmitters
Part Number: QRLANYARDRM
Part Number: T187-MD
Description: Lanyard Kit for RM
Remote Control Units
Description: Replacement battery
cover for UT Transmitter
Part Number: RATPAC
Part Number:WMBCSL
Description: Kit for a single right angle
3- or 5-pin TA conn. for transmitter inputs
or SR receiver outputs
Description: Spring-loaded machined
aluminum clip for WM Transmitter
Part Number: REFUMCABLE
Part Number: WMBCWIRE
Description: Connecting cable for
Mute switch, used between switch and
transmitter.
Description: Machined, wire Belt Clip
for dual-battery WM Series transmitters,
Antenna Up or Down
Part Number: SMA-MD0R
Part Number: WMDESIKIT
Description: Replacement battery door
for SM Series single battery transmitters
Description: includes replacement battery caps with desiccant beads, O-rings,
lanyards, thumbscrew and allen wrench.
Part Number: SMBATELIM
Part Number:WPMC-10
Description: Battery eliminator for SM
Series transmitters
Description: Connector Kit, Watertight,
for Mics Used with MM Transmitters, 10
Pcs.
Part Number: SMDA-MD0R
Part Number: WPMC-3
Description: Replacement battery door
for SM Series dual battery transmitters
Description: Connector Kit,
Watertight, for Mics Used with
MM Transmitters, 3 Pcs.
©Copyright 2013. Lectrosonics, Inc.
LECTROSONICS, INC.
Quality Products Since 1971
www.lectrosonics.com
©Copyright 2013. Lectrosonics, Inc.
13
Made In The USA By A Bunch Of Fanatics
Microphones
Headset Microphones
HM172
The HM172 omni “earset”
microphone mounts
securely to the user’s
ear with a comfortable,
bendable silicone
frame and provides
excellent vocal
quality in a nearly
invisible package.
The length is ideal
for maximum gain
before feedback while keeping the element away from the user’s breath stream for low noise. The HM1725P comes wired
for use with any UHF Lectrosonics belt pack transmitter
including LM, LMa, UM400, UM400a, SM, SMa, SMV, SMDa
and SMQV. Sensitivity is moderate for use with speech or
singing. Complete with windscreen and HF peak cap.
HM162
Lightweight headworn microphone with bi-directional, noise
cancelling element for increased gain before feedback with
public address systems such as the Long Ranger. Adjustable mic boom and neckband for comfortable fit over the
ears and around the back of the neck. Includes foam windscreen for outdoor use. The HM162 is available with 2.5mm
locking micro.
Lavaliere Microphones
M119
M140
M152
Choosing the right miniature microphone depends mainly on
the intended application and the specific transmitter used.
Lectrosonics provides a variety of solutions at reasonable
costs. The M152 in particular is a high-performance
omnidirectional capsule with a wide dynamic range and low
noise. Connector choices cover every type of transmitter from
Lectrosonics, past and present.
14
©Copyright 2013. Lectrosonics, Inc.
LECTROSONICS, INC.
Quality Products Since 1971
Microphones
Microphones
This chart represents the capsule connector combinations available.
Connectors
Lavaliere
& Headset
Microphone
Capsules
SM5P
5P
MC
WP
Locking 5-Pin Plug
with Dust Boot
Locking 5-Pin Plug
(Switchcraft TA5F)
Straight, Locking Micro Plug
Waterproof
Locking Micro Plug
(two wire configuration)
N/A
HM1725P
N/A
N/A
N/A
N/A
HM162MC
N/A
N/A
M1195P
M119MC
N/A
N/A
N/A
M140MC
N/A
M119
Omnidirectional
Capsule
M140
Miniature
Cardioid
Capsule
M152
High-Performance
Omnidirectional
Capsule
M152/SM5P
M152/5P
M152/MC
M152/WP
(M152-7005P available for
700 Series Compatibility)
www.lectrosonics.com
©Copyright 2013. Lectrosonics, Inc.
15
Made In The USA By A Bunch Of Fanatics
Accessories
16
Microphones
Part Number: 21357
Part Number:MC35
Description: Locking Switchcraft micro
plug, 1/8”
Description: Adapter Cable, 37”, Line
Level, XLRF to TA5F
Part Number: 21359
Part Number: MC36
Description: Plug Cord, Female,
5 Pin TA5F
Description:Adapter Cable, 37”,
Right-Angle 3.5mm Mono Mini Plug to
Straight 3.5mm Mono Mini Plug
Part Number: 35510
Part Number: MC40
Description: Water-tight replacement
boot for SM5P Microphone connectors
Description: Adapter Cable, 37”, Mic
Level, XLRF to TA5F. Wired for
dynamic mic input to transmitters
Part Number: 35690
Part Number: MC41
Description: Strain Relief, Clip-on for
HM142
Description: Adapter Cable, 37”, Mic
Level, XLRF to TA5F. Works with early
5-pin inputs and servo bias inputs.
Part Number: 35746
Part Number: MC44
Description: Cushion for Headset Mic
HM142V & HM152V
Description: Adapter Cable, 37”,
Male 1/4” Mono Plug to Male Locking
Micro Plug.
Part Number: 35939
Part Number: MC46
Description: Replacement blue canvas
zipper case for HM172 Earset Mic. MIC
SOLD SEPERATELY
Description: Adapter Cable, 37”,
for Dynamic Microphone, 1/4” Mono
to TA5F
Part Number: C119
Part Number: MC47
Description: Mic Clip, for M119/M140,
Tie Bar Style
Description: Adapter Cable, 37”,
RCA to TA5F
Part Number: C119RA
Part Number: MC60
Description: Mic Clip, Right Angle for
M119/M140, Tie Bar Style
Description: Adapter Cable, 37”,Mic
Level, XLRF to TA5F, 5V Bias on XLR
Part Number: C140
Part Number: MC65
Description: Mic Clip for M119/M140,
Cable Mount
Description: Adapter Cable, 10ft, 1/4”
Male to Mini TRS
Part Number: C150
Part Number: MCA5X
Description: Mic Clip for M150/152
Description: Adapter, TA5F to XLRM,
for Lav Mics with Plug-On (H)
Transmitters
Part Number: C172
Part Number: MCABRLTA5MUWP
Description: Mic Clip for HM172, Cable
Mount
Description: Universal Barrel Adapter,
5-pin Mic to MM400/b/c Input and WP
Part Number: FC172-BE
Part Number: MCATA5MUWP
Description: Beige colored filter cap for
HM172 Earset Microphone
Description: Universal Mic Cable
Adapter, TA5F To WP
Part Number: MC16C
Part Number: MCA-TA5PAD
Description: Mic Cord, Coiled, 16ft, 1/4”
to 1/4” Male
Description: Mic Cable Adapter, XLRF
to TA5F, -10dB attenuation
©Copyright 2013. Lectrosonics, Inc.
LECTROSONICS, INC.
Quality Products Since 1971
Accessories
Microphones
Part Number: MCA-TPOWER
Part Number: RK150
Description: Mic Cable Adapter,
T-Power from UH400A Transmitter
Description: Windscreen for M150/
M152 Lav Mic
Part Number: MCAXLRLINE-WP
Part Number: RK172-BE
Description: Cable Adapter, XLR to WP
for MM400/b/c, Line Level
Description: Windscreen for HM172
earset mic, biege
Part Number: MCAXLRMIC-WP
Part Number: SMKITTA5
Description: Cable Adapter, XLR to WP
for MM400/b/c, Mic Level
Description: Connector Kit for SMtype transmitters, 5-pin TA5F Plug with
Sleeve
Part Number: MICBOX
Part Number: WPMC-10
Description: Replacement mic case for
lav mics and lav mic accessories.
Description: Connector Kit, Watertight,
for Mics Used with MM Transmitters,
10 Pcs.
Part Number: RK119
Part Number: WPMC-3
Description: Windscreen for
M119 Lav Mic
Description: Connector Kit, Watertight,
for Mics Used with MM Transmitters,
3 Pcs.
Part Number: RK142
Description: Windscreen for HM142V
and HM152V Headset Mics
www.lectrosonics.com
©Copyright 2013. Lectrosonics, Inc.
17
Made In The USA By A Bunch Of Fanatics
18
©Copyright 2013. Lectrosonics, Inc.
LECTROSONICS, INC.
Quality Products Since 1971
Gregg
Rosenberg
Fanatic Since 2008
Production Test
www.lectrosonics.com
©Copyright 2013. Lectrosonics, Inc.
19
Made In The USA By A Bunch Of Fanatics
SRb Series
Portable Receivers
Dual-Channel Slot Mount Receivers
SRb5P
• Two independent channels in
one housing
• Digital Hybrid Wireless® for pristine audio quality
• All-metal construction for superior durability
• RF Spectrum scanner for ease of finding clean channels
• The SRb requires one of the following kits:
• SRUNI
• SRSNY
• SNEXT
• SRBATTSLED
• SRHARNESS
SRb
SRUNI for Unislot-type
cameras (Panasonic,
Ikegami, JVC)
SRSNY for Sony®
slot-mount cameras
The SRb receiver is now available in two versions with
detachable antennas. The SRb5P version includes a 5-pin,
dual channel audio output next to the control panel. Front
and rear outputs operate simultaneously to expand the flexibility of the design.
The SRb version is supplied without the front panel 5-pin
audio output for use with two channel slots and for standalone operation.
SREXT for external camera mounting
The SRBATTSLED adapter allows
powering with
“L” or “M” type
rechargeable
batteries
SRNARNESS Audio output and power
adapter panel with
12”pigtails
Two diversity modes are offered in the SR. Microprocessor controlled SmartDiversity™ reception is employed by
independently combining antenna phase for each receiver
channel. Alternately, the two channels can be used together
in “Ratio Diversity” mode as a single receiver. Graphic
spectrum scanning provides quick and easy location of clear
operating frequencies for interference-free operation.
The two Digital Hybrid Wireless® receivers inside the SR offer 256 frequencies and operate with any of the Lectrosonics
Digital Hybrid transmitters without a compandor in the audio
path. In addition, compatibility modes also facilitate operation
with Lectrosonics 100 Series, 200 Series, and IFB analog
systems, along with analog transmitters from two other
manufacturers. Transmitter battery strength is monitored in
the SR when using compatibility modes for 200 and Digital
Hybrid Series transmitters.
While mounted on a camera, the receivers are splash resistant—thanks to sealed membrane switches and LCD, along
with a special gasket covering the slot opening.
A new battery sled adapter allows using “L” and “M” type rechargeable batteries for stand-alone use with either version
of the receiver.
20
©Copyright 2013. Lectrosonics, Inc.
LECTROSONICS, INC.
Quality Products Since 1971
Octopack
Portable Receivers
SRa/SRb Receiver Multicoupler Box
• Holds up to 4 SR Series Slot Receivers for a total of 8
channels
• High performance RF distribution
• Power distribution
• Accommodates both versions of SRa/b receivers
• Powered by external DC or rechargeable batteries
• Requires SRUNI 25-pin unislot adapter
The OctoPackTM is an exceptionally small and lightweight
multicoupler that is ideal for field production, with studio quality performance.
TM
With four receivers installed, the multicoupler can provide up
to eight audio channels by selecting ratio diversity or switching diversity on the receivers in various combinations.
Standard BNC inputs can be used with any type of antenna
or coaxial cable. Antenna power can be switched on to provide DC on the coaxial cable for remote RF amplifiers.
Balanced audio outputs are provided on the side panel. Front
panel audio outputs are also available with the 5P version of
the receivers.
The OctoPack can be powered by external DC or with
rechargeable “L” or “M” type batteries. Power circuits are protected with auto resetting polyfuses to guard against damage
that might be caused by shorts.
The rear panel of the assembly is recessed behind reinforced
panels that extend from the top and bottom covers. The DC
power connector is a threaded, locking type, with a variety of
right angle and straight mating connectors available.
SR9VBP
9V Battery Pack For BATTSLED, SRBATTSLED & OCTOPACK
The SR9VBP is a machined aluminum battery pack that can
be used in lieu of an “L” type battery on the SRBATTSLED
and OCTOPACK. Can be used with alkaline, lithium or
rechargeable 9 volt batteries. Great for locations where electricity is unavailable for rechargeable battery packs.
Note: This can not be used with a battery charger.
www.lectrosonics.com
• Uses two 9V batteries
• Fits “L” style battery receptacles
• Great for emergency backup power
©Copyright 2013. Lectrosonics, Inc.
21
Made In The USA By A Bunch Of Fanatics
Quadpack
Portable Receivers
Power/Audio Interface
* Accepts two SR Series receivers
• Requires SRUNI 25-pin unislot adapter
* Balanced XLR audio outputs
* Balanced TA3M audio outputs
* Output jack panels can be reversed
* Locking coaxial DC power connector
* 4-pin Hirose DC power connector
* Powder coated aluminum housing
Designed for portable field production, the Quadpack
simplifies the mounting and interconnection of two SR
Series compact receivers. Lightweight and rugged, it
is perfectly at home in bag systems containing mixer,
recorder and wireless transmitters used for audio feed
to cameras. One set of audio outputs is used to feed the
recorder and the other set to feed wireless transmitters.
Power is taken from an external DC source via one or both
connectors. Circuitry is employed between the two jacks that
takes power from the source with the higher voltage. This
can be used to provide a backup power supply where the
DC is automatically taken from the opposite jack if power is
interrupted at one of them.
UMCWB
Multi-Coupler
The UMCWB provides a mechanical rack mount with power and RF signal distribution for four diversity compact receivers in
a single rack space. The wideband design allows the multi-coupler to be used with receivers in all frequency blocks from 21
through 29. This provides flexibility, however, the antennas used with this system must also cover the range of the installed
receivers.
The UMCWB frame with UHF RF/power distribution can accept the following receivers: UCR195D, UCR200D, UCR205D,
UCR210D, UCR211, UCR300, UCR310, UCR411A. PS70 power supply sold separately.
22
©Copyright 2013. Lectrosonics, Inc.
LECTROSONICS, INC.
Quality Products Since 1971
UCR411a
Portable Receivers
Compact Receiver
• Digital Hybrid Wireless for compandor-free audio
®
• SmartSquelch™ and SmartDiversity™ for
optimum reception
• Auto-tracking front-end filters for maximum rejection of
RF noise
• Graphics type backlit LCD display for settings
and monitoring
• Internal 9V batteries or external DC powering options
• Compatibility modes for use with analog transmitters
The UCR411A receiver provides professional performance and a versatile feature set in a compact design
for field and location production. All settings are made
from the front panel with an LCD interface, making
the unit ideal for use in Six Packs, on sound carts, in
portable bags and in rack mount multi-couplers. To alleviate interference problems in an increasingly congested RF
spectrum, an RF spectrum analyzer is built into the receiver,
thus finding clear operating frequencies is a quick, simple
process. The UCR411A is compatible with all 400, 200, 100
Series and IFB Lectrosonics transmitters and units from two
other manufacturers. The UCR411A can be powered with
internal 9V batteries or external DC.
UCR401
Compact Receiver
• Digital Hybrid Wireless® for compandor-free audio
• SmartSquelch™ and SmartDiversity™ for
optimum reception
• LCD display with spectrum scanner
• Two AA batteries or DC power
• Compatibility modes for use with analog transmitters
The UCR401 is a high performance compact UHF wireless
microphone receiver for mobile applications such as ENG
and film production. The compact size, powering options
and rugged attached antennas are ideal for video camera
mounted use. Unique DSP algorithms in the design provide
full compatibility with all Lectrosonics 400 Series Digital
Hybrid Wireless® transmitters and variety of analog transmitters from Lectrosonics and some other manufacturers. Power
is provided by two AA batteries, typically NiMH rechargeable
types, or external DC supplied via a jack on the rear panel.
www.lectrosonics.com
©Copyright 2013. Lectrosonics, Inc.
23
Made In The USA By A Bunch Of Fanatics
UCR100
Portable Receivers
Ultra-Compact Analog Compact Receiver
• Ideal for compact DV camcorders
• 256 selectable UHF frequencies offered in each of 7 blocks
• High sensitivity for extended range
• Dual-band compandor for excellent audio quality
• Machined aluminum construction for durability
The Lectrosonics 100 Series was designed to operate with
the new generation of DV camcorders, offering an ultracompact receiver and modest cost, yet preserving the
performance that has become the hallmark of Lectrosonics. The system is offered in seven different blocks
each with 256 selectable frequencies over a 25.6 MHz
band to avoid interference from local RF sources. The
UCR100 receiver is highly sensitive for exceptional operating range and freedom from drop outs.
24
©Copyright 2013. Lectrosonics, Inc.
LECTROSONICS, INC.
Quality Products Since 1971
Portable Receivers
VR FIELD - 230 MHz
Portable Modular Receiver
There are 2 versions of the VRM, each covers a 230MHz
range.
• Wideband Low covers blocks 470 (470.100) through 26
(691.100).
• Wideband Mid covers blocks 21 (537.600) through 29
(767.900).
• Ultra portable and self-contained
• Six channel modular configuration
• “NP1” style battery or external DC power
• Digital Hybrid Wireless® for compandor-free audio
• 3 different diversity reception schemes
• Compatibility modes for use with analog transmitters
Any VRS or VRT receiver module in the respective blocks
can be used.
• USB and RS-232 computer interface for control and
programming with included software
• Front-panel headphone jack for monitoring
• VRS (Standard) and VRT (Tracking) receiver modules
available
The VR Field Receiver is a battery or DC powered modular
UHF design that operates with Digital Hybrid Wireless®
transmitters, and a variety of analog transmitters. The modular
design allows use of one to six plug-in receiver modules and
includes an antenna multi-coupler, computer communications
interface and battery receptacle. The VR Field offers a
tremendous degree of flexibility in portable applications such
as film production, ENG and documentaries. The NP1-style
battery receptacle allows for long operational time between
charges.
www.lectrosonics.com
©Copyright 2013. Lectrosonics, Inc.
25
Made In The USA By A Bunch Of Fanatics
Accessories
Part Number: 21425
Part Number: 35908
Description: 6 ft. long power cord;
coaxial to stripped & tinned leads
Description: Adhesive battery strap
for easy removal of NP1 style batteries.
BATTERY NOT INCLUDED
Part Number: 55007
Part Number: 21499
Description: Power Cable for Sixpack
UHF, 60320 to Edison
Part Number: 21586
Description: Power cable; locking LZR
type plug to stripped and tinned leads.
26
Portable Receivers
Description: Clear AA battery caddy
Part Number: 55008
Description: Blue AA battery caddy
Part Number: 21642
Part Number: A195S
Description: Euro Power Cord CEE 7/7
(Schuko) plug
Description: Straight VHF helical whip
antenna for CR187 and other portable
VHF receivers.
Part Number: 21643
Part Number: A195RA
Description: UK Power Cord BS
1363 plug
Description: Right Angle VHF helical
whip antenna for CR187 and other
portable VHF receivers.
Part Number: 21644
Part Number: A500RA (Specify Block)
Description: Australian Power Cord
S3112 plug
Description: Antenna, UHF, Right Angle
BNC (Specify Block)
Part Number: 21713
Part Number: A500S
Description: Cable , MB USB A2B
Description: Antenna, UHF, Flexible,
Straight BNC 470-608 MHz
Part Number: 21746
Part Number: A8U (Specify Block)
Description: DC Power Cord, 1ft, for VR
Field, Stripped & Tinned
Description: Antenna, UHF, Straight
BNC (Specify Block)
Part Number: 21747
Part Number: AMJXX
Description: DC Power Cord, 6ft, for VR
Field, Stripped & Tinned
Description: Swivelling whip antenna
with standard SMA connector
(Specify Block)
Part Number: 21762
Part Number: AMJKIT
Description: Neutrik right angle XLR
female connector; cast metal housing
Description: Swivelling whip antenna kit
with Color Caps
Part Number: 21793
Part Number: AMM KIT
Description: Male SMA to Female SMA
Right Angle Adapter
Description: Transmitter Antenna Kit
With Color Caps
Part Number: 26289
Part Number: AMM-0
Description: Panel, blank, for RMP195/
SDM4D/RDM4
Description: Transmitter Antenna Color
Caps
Part Number: 35554
Part Number: AMM (Specify Block)
Description: Rain cap for SRa5P output
Description: Transmitter Antenna for
UHF Belt-pack Unit, Specify Block
©Copyright 2013. Lectrosonics, Inc.
LECTROSONICS, INC.
Quality Products Since 1971
Portable Receivers
Accessories
Part Number: BATTSLED
Part Number: MCSRXLR
Description: General purpose battery
adaptor. Optional spring loaded clip is
available. BATTERY NOT INCLUDED
Description: Audio Cable, for SR Receiver. TA3F plug to XLRM; 12”.
Part Number: BIAST
Part Number: MCSR/5PXLR1
Description: DC Power Supply, Inline,
for UFM50, UFM230
Description: Audio cable for SR receiver. Right angle TA5 to 3-pin male XLR
Part Number: CCMINI
Part Number: MCSR/5PXLR2
Description: Zip Pouch for Compact
Wireless System
Description: Audio cable for SR receiver. Right angle TA5 to two 3-pin
male XLRs
Part Number: CH12
Part Number: MCSR/5PXLR5P
Description: AC Adapter, 115VAC in,
12VDC out for ISO9V Battery Eliminator
Description: Audio cable for SR
receiver. Right angle TA5 to 5-pin
male XLR
Part Number: CH20
Part Number: MCVRFIELD
Description: Power Supply, 110VAC in,
12VDC Regulated out, 400mA
Description: Cable, XLRF Right Angle
to Mic Cable with Stripped, Tinned
Leads, 3 Ft.
Part Number: DCR15/1A6U
Part Number: P1196
Description: Power Supply with universal socket. 90-240VAC in, 15VDC
regualted output
Description: Retainer clip for Venue, VR
Field receiver modules
Part Number: MC55
Part Number: P1199
Description: Adapter Cable, 15”, Unbalanced
Line-Level Mini Right-Angle Plug to Balanced
Mic Level (45dB Attenuation). Includes Capacitors to block DC
Description: Rain Cover for UCR211,
411, 411a
Part Number: MC100RCA
Part Number: P1200
Description: Output Cable, TRS to
RCA, for UCR100
Description: Rain Cover for UCR201 &
UCR401
Part Number: MC100TRS
Part Number: PF25 - (Specify Block)
Description: Output Cable, TRS to TRS,
for UCR100
Description: Passive inline filter
25 MHz bandwidth. Specify block.
Part Number: MC100XLR
Part Number: PF50 (Specify Block)
Description: Output Cable, TRS to XLR
(Unbalanced), for UCR100
Description: Passive In-Line Filter with
Bias-T. Specify block range (XX-XX = two block range)
Part Number: MCAXLRATTEN
Part Number: PS12A
Description: Balanced XLR male to
stripped and tinned leads
Description: Power Cable, 12”, Hirose4
to DC Coax
Part Number: MCSRPT
Part Number: PS1214
Description: Audio Cable, for SR Receiver. TA3F plug to Stripped,
Tinned Leads, 15”.
Description: Hole cover for VRFIELD
Part Number: MCSRTRS
Part Number: PS1215
Description: Audio Cable, for SR Receiver. 3.5mm TRS (stereo) plug to dual
TA3F plugs; 12”
Description: Battery cover for NP1 style
battery on VRFIELD
www.lectrosonics.com
©Copyright 2013. Lectrosonics, Inc.
27
Made In The USA By A Bunch Of Fanatics
Accessories
28
Portable Receivers
Part Number: PS200A
Part Number: SRBATTSLEDBOTTOM
Description: Power Cable, 12”, Hirose4
to LZR
Description: Battery Adapter for SR Receivers.Accepts L and M type rechargeable batteries
Part Number: PS212A
Part Number: SRSLEEVE
Description: Power Cable, 12”, Hirose4
to Dual DC Coax
Description: Mounting sleeve for SR
Receiver, includes velcro.
Part Number: PS2200
Part Number: SRHARDWARE
Description: Power Cable, 12”, Hirose4
to Dual LZR
Description: Hardware kit for
SRSLEEVE, right angle and straight
brackets for cold shoe mounting.
Part Number: PS2212
Part Number: SRHARNESS
Description: Power Cable, 12”, Hirose4
to 1 DC coax, 1 LZR
Description: Output/Power adapter
panel for SR receiver, strain relief attached cables.
Part Number: PS70
Part Number: SR5PRETROKIT
Description: Power Supply, 115VAC in,
12VDC coaxial out, US
Description: Converts SR receiver to
SR5P receiver
Part Number: PSLZRDUAL
Part Number: SR9VBP
Description: LZR style plug to LZR
style plug
Description: 9V battery pack for SRBATTSLED and OCTOPACK
Part Number: RATPAC
Part Number: UFM230
Description: Kit for a single right angle
3- or 5-pin TA conn. for transmitter inputs
or SR receiver outputs
Description: UHF Filter/Amp Module,
230MHz Bandwidth
Part Number: SRSNY
Part Number: UFM50
Description: Mounting adapter for SR
Receiver. For Sony cameras.
Description: UHF Filter/Amp Module,
50MHz Bandwidth
Part Number: SRSNYSCREWKIT
Part Number: VSR1
Description: Replacement screw kit for
SRSNY adapter and one spare screw for
each size.
Description: Velcro® Cable Strain Relief
Part Number: SRUNI
Part Number: VRFIELD-EC
Description: Mounting adapter for SR
Receiver Unislot kit for Ikegami and
Panasonic cameras.
Description: Replacement module attachment clip for VR Field
Part Number: SRUNISCREWKIT
Part Number: ZSC24
Description: Replacement screw kit for
SRUNI adapter and one spare screw for
each size.
Description: Passive Splitter, 2-way
Part Number: SREXT
Part Number: ZFSC41
Description: Adapter kit for SR receiver, two
TA3 audio output jacks, locking power connector, includes 6’ power cord.
Description: Passive Splitter, 4-way
Part Number: SRBATTSLEDTOP
Part Number: ZFSC843
Description: Battery Adapter for SR Receivers. Accepts L and M type rechargeable batteries
Description: Passive Splitter, 8-way
©Copyright 2013. Lectrosonics, Inc.
LECTROSONICS, INC.
Quality Products Since 1971
Portable Receivers
www.lectrosonics.com
©Copyright 2013. Lectrosonics, Inc.
29
Made In The USA By A Bunch Of Fanatics
D4
Digital Wireless
4-Channel Digital Wireless System
• 2 or 4 channel operation
• DTV-free unlicensed ISM band 902-928 MHz
• Digital or analog inputs; digital or analog outputs
• 24-bit, 48 kHz audio
• Exceptional operating range
The D4 digital wireless system provides 2 or 4 channels of
flawless audio wirelessly with up to 1200 ft of range. The
system is designed for line level analog audio and AES/
EBU digital audio signals, and operates at 24 bits and 48kHz
sample rate.
The D4 system operates between four and eight selectable operating channels within the license and DTV-free
ISM band between 902 and 928 Mhz. Each channel
carries two or four separate audio signals, digitally
multiplexed within a common carrier.
Front panel controls enable all setup and monitoring
using an LCD interface. RF and audio levels and currently
selected modes are displayed in the main window.
The compact size and light weight make the D4 extremely
portable - ideal for use in television and film production. A
typical application will be for “bag systems” along with a
portable mixer and several wireless microphone receivers
in a over-shoulder soft case. The D4T transmitter relays up
to 4 audio channels from the bag back to one or more D4R
receivers mounted on cameras.
30
©Copyright 2013. Lectrosonics, Inc.
LECTROSONICS, INC.
Quality Products Since 1971
Digital Wireless
Accessories
Part Number: 21422
Part Number: AMJR915
Description: Replacement Antenna
for D4 system
Description: Whip antenna with reverse
gender SMA connector for D4 System
and M4T Quadra Transmitter
Part Number: 21425
Part Number: BATTSLED
Description: 6 ft. long power cord;
coaxial to stripped & tinned leads
Description: General purpose battery
adaptor. Optional spring loaded clip is
available. BATTERY NOT INCLUDED
Part Number: 21472
Part Number: DCR15/1A6U
Description: Right angle power cord,
coaxial plug, stripped/tinned leads,
6’ long
Description: Power Supply with universal socket. 90-240VAC in, 15VDC
regualted output
Part Number: 21499
Part Number: DCR12/A8U
Description: Power Cable for 60320
C13 to Edison
Description: Power Supply for D4
system
Part Number: 21586
Part Number: MCSRPT
Description: Power cable; locking LZR
type plug to stripped and tinned leads.
Description: Audio Cable, for SR
Receiver. TA3F plug to Stripped,
Tinned Leads, 15”.
Part Number: 21746
Part Number: MCSRXLR
Description: DC Power Cord, 1ft, for VR
Field, Stripped & Tinned
Description: Audio Cable, for SR Receiver. TA3F plug to XLRM; 12”.
Part Number: 21747
Part Number: MCSRXLRF
Description: DC Power Cord, 6ft, for VR
Field, Stripped & Tinned
Description: Audio Cable, for SR Receiver. TA3F plug to XLRF; 12”.
Part Number: 21798
Part Number: PSLZRDUAL
Description: USB cable for firmware updates; USB 2.0 to mini-b; 2 meter length
Description: LZR style plug to LZR style
plug. 6 ft. power cable
www.lectrosonics.com
©Copyright 2013. Lectrosonics, Inc.
31
Made In The USA By A Bunch Of Fanatics
Dustin
Jones
Fanatic Since 2005
Engineering
32
©Copyright 2013. Lectrosonics, Inc.
LECTROSONICS, INC.
Quality Products Since 1971
www.lectrosonics.com
©Copyright 2013. Lectrosonics, Inc.
33
Made In The USA By A Bunch Of Fanatics
VRM (Venue)
Studio Receivers
Rack-Mount Modular Receiver
• Six-channel modular configuration in 1 RU
• Digital Hybrid Wireless® for compandor-free audio
• Three different diversity schemes
• Compatibility modes for use with analog transmitters
• USB and RS-232 computer interface and VRpanel software
• VRS (Standard) and VRT (Tracking) receiver modules
available
The Venue Receiver system is a modular design that operates with Digital Hybrid Wireless® transmitters, and a variety
of analog transmitters. It consists of a Venue Receiver
Master (VRM) and one to six plug-in receiver modules. The
VRM includes an antenna multi-coupler, computer communications interface and the mechanical rack mounting for
the receiver modules. The VR’s design offers a tremendous
degree of flexibility including diversity reception schemes,
compatibility modes, and tracking and non-tracking modules.
The included software provides an excellent interface for
setup and monitoring via USB or RS232 connections. The
Venue receiver can be controlled with AMX© and CRESTRON® systems.
VRM WB - 230 MHz Range
Wideband Modular Receiver
There are 3 versions of the VRM, each covers a 230MHz range.
• Wideband Low covers blocks 470 (470.100) through 26 (691.100).
• Wideband Mid covers blocks 21 (537.600) through 29 (767.900).
• Wideband High (Export Only) covers blocks 25 (640.000) through 33 (861.900).
Any VRS or VRT receiver module in the respective blocks can be used.
34
©Copyright 2013. Lectrosonics, Inc.
LECTROSONICS, INC.
Quality Products Since 1971
VRS, VRT
Studio Receivers
Digital Hybrid Wireless® Receiver Modules
Two different receiver modules are available for the Venue
receiver. Both are triple conversion, frequency synthesized
UHF receivers controlled by the DSP in the host assembly.
VRS (Standard) - fixed bandwidth front-end design that is an
excellent value and well suited to all but the most congested
RF environments.
VRT (Tracking) - same as the VRS module but with the addition of advanced frequency tracking front-end filters. Excellent for congested and hostile RF environments.
VRPanel Software
VRPanel is a software package provided with the Venue
receiver to simplify setup and enable continuous monitoring
during operation. A summary of each Venue receiver system
is displayed with real time indications for essential levels
and settings on each installed receiver module. With multiple
Venue receivers, the main display window expands to include
a pane for each receiver module in the system.
Right clicking anywhere in a receiver pane invokes a contextsensitive and position-sensitive popup menu. From there it is
possible to alter settings, add or delete a Venue receiver from
VRPanel, perform a spectrum scan, start
the Walk Test Recorder and more.
A spectrum scanner is included to enable
site surveys and find clear operating frequencies. The receiver is tuned across the
entire band and RF signals are presented
in a graphical display, with signal strength
indicated by a scale in the center of the
screen. A walk test recorder is also included to make a record of signal strength
as a walk test is being conducted.
www.lectrosonics.com
©Copyright 2013. Lectrosonics, Inc.
35
Made In The USA By A Bunch Of Fanatics
R400a
Studio Receivers
Table-Top Receiver
• Digital Hybrid Wireless® for compandor-free audio
• Compact design and metal construction
• Compatibility modes for use with analog transmitters
• SmartTune™ function for quick, accurate tuning
• Separate XLR and 1/4” outputs with independent level
control
• Available as stand-alone, single or dual-rack versions
The R400a is a high performance, Digital Hybrid Wireless®
diversity receiver compatible with all Lectrosonics 400 series
transmitters, and a number of analog models. The R400a
features a powerful menu-driven LCD graphic display as a
convenient means of monitoring performance and altering settings. A built-in RF spectrum analyzer is included
to conduct site surveys to find interference-free operating
frequencies. Balanced XLR and unbalanced ¼” outputs can
be controlled separately. The R400A is offered as a
stand-alone unit, as a single-channel 1RU rack unit, or
as a dual-channel 1RU rack unit (see below).
R400a Rack Mount Receiver*
R400a + RMPR400-1
(2) R400a + RMPR400-2
Part Number:
RMPR400-1
Part Number:
RMPR400-2
Description:
Rack Mount Kit
for one R400A
Receiver
Description: Rack
Mount Kit, two
R400A Receivers
*Racks should be ordered with unit and are assembled at the factory
UMC16B - 230 MHz (Multicoupler for all receivers)
The UMC16B multi-coupler combines ceramic filtering with
low noise, high intercept point RF distribution to provide
outstanding performance and flexibility. Up to eight diversity
receivers or up to 16 non-diversity receivers can be utilized
in up to a 230 MHz passband.
36
©Copyright 2013. Lectrosonics, Inc.
The UMC16B can be powered from an
external supply, 12 to 18 VDC for mobile
applications, or from 90 to 240 VAC for
installations using the regulated power
supply furnished with the unit. A locking
connector on the rear panel secures the
power connection.
A 50 MHz passband version is available on a build-to-order
basis. Allow several weeks for delivery.
LECTROSONICS, INC.
Quality Products Since 1971
Studio Receivers
Accessories
Part Number: 21499
Part Number: DCR15/1A6U
Description: Power Cable 60320 C13
to Edison
Description: Power Supply for Venue
Receiver. 90-240VAC in, 15VDC regualted output
Part Number: 21642
Part Number: MCAXLRATTEN
Description: Euro Power Cord CEE 7/7
(Schuko) plug
Description: Balanced XLR male to
stripped and tinned leads
Part Number: 21643
Part Number: P1196
Description: UK Power Cord BS
1363 plug
Description: Retainer clip for Venue, VR
Field receiver modules
Part Number: 21644
Part Number: PF25 - (Specify Block)
Description: Australian Power Cord
S3112 plug
Description: Passive inline filter
25 MHz bandwidth. Specify block.
Part Number: 21713
Part Number: PF50 (Specify Block)
Description: Cable, MB USB A2B
Description: Passive In-Line Filter
with Bias-T. Specify block range (XX-XX = two block range)
Part Number: 21730
Part Number: RMP200-1
Description: 12” BNC antenna looparound cable for R400 rack mount kit
Description: Rack Mount Kit for
one UDR200 or UDR700 receiver
Part Number: 25877
Description: Angle Bracket for Rack
Mounting UDR200/700 Receivers (part
of kit, see RMP200-1 or RMP200-2)
Part Number: 25878
Description: Block for Rack Mounting
UDR200/700 Receivers, narrow
(part of kit, see RMP200-2)
Part Number: 25879
Description: Block for Rack Mounting
UDR200/700 Receivers, wide
(part of kit, see RMP200-2)
Part Number: RMP200-2
Description: Rack Mount Kit for one
UDR200 or UDR700 receiver
Part Number: UFM230/UFM230L
Description: UHF Filter/Amp Module,
230MHz Bandwidth
Part Number: UFM50
Description: UHF Filter/Amp Module,
50MHz Bandwidth
Part Number: BIAST
Part Number: ZSC24
Description: DC Power Supply, Inline,
for UFM50, UFM230
Description: Passive Splitter, 2-way
Part Number: CCIS400
Part Number: ZFSC41
Description: Waterproof Case for
R400A and IM Transmitter
Description: Passive Splitter, 4-way
Part Number: CCTM400
Part Number: ZFSC843
Description: Waterproof Case for
R400A and UH400TM Transmitter
Description: Passive Splitter, 8-way
Part Number: DCR12/A4U
Description: Power Supply for R400a
Receivers
www.lectrosonics.com
©Copyright 2013. Lectrosonics, Inc.
37
Made In The USA By A Bunch Of Fanatics
ALP Series
Remote Antennas
LPDA Antennas
The ALP Series antennas are a Log Periodic Dipole Array (LPDA) design that provides a useful directional pattern over a broad
frequency bandwidth (500 - 800 MHz), allowing coverage of the entire UHF band used for Lectrosonics wireless microphone
and IFB systems. These antennas provide 4dB of gain in the forward direction.
ALP 500
Economical Design With
Uncovered Connectors
ALP 620
Skeletonized Design For Low Wind
Resistance When Used In
Mobile Locations
ALP 650
Amplified Design For Use With Long
Coaxial Cable Runs
Passband:
ALP650L/E (RoHS compliant) ALP650M/E (RoHS compliant) ALP650H/E (RoHS compliant) 38
470.000 - 692.000 MHz
537.000 - 768.000 MHz
640.000 - 862.000 MHz
©Copyright 2013. Lectrosonics, Inc.
LECTROSONICS, INC.
Quality Products Since 1971
SNA600
Remote Antennas
Folding Antenna Kit
Collapsible dipole antenna kit with 100MHz bandwidth, adjustable from 550 MHz to 800 MHz. Ideal for situations where
a full 360 degree receiving pattern is required (as opposed to
a directional pattern).
Includes mounting kit.
#28790
#28769
#26332
#28407
The SNA600 comes complete with mounting hardware. (parts and part numbers shown above)
PCA900
A unique and very useful design, the PCA900 antenna
provides wide bandwidth (825 MHz - 1 GHz) and a circular
pattern in a compact, rugged package. A BNC connector
allows direct connection to receivers and multicouplers with
standard 50 ohm coaxial cable. An aluminum mounting strap
for fixed installation is included and a variety of other mounting options are also available for mobile applications.
www.lectrosonics.com
Printed Circuit Antenna
©Copyright 2013. Lectrosonics, Inc.
39
Made In The USA By A Bunch Of Fanatics
In-Line RF Amplifiers
Remote Antennas
UFM230/UFM230L
In-Line RF Amplifier
The UFM230 provides a unique solution for antenna systems
requiring long cable runs or distribution to multiple receivers or locations. The amplifier in the unit provides 12 dB of
gain without attenuation. Gains of 5 dB and 8 dB can also
be selected using the supplied attenuators. The built-in filters
provide a 230 MHz passband to cover all standard Lectrosonics frequency blocks.
*Power supply not included
UFM50
In-Line RF Amplifier
The UFM50 performs the same function as the UFM230 but
with a 50 MHz passband to cover two standard Lectrosonics
frequency blocks. User must specify frequency range when
ordering. (Available by special order only.)
*Power supply not included
PF50
Passive In-Line Filter
With Bias-T
Passive in-line RF filter with 50MHz passband and DC Bias
insertion port. Designed for use with VRMWB and VRField
WB wide-band receiver systems in cases where the full
bandwidth of the receiver is not needed. Specify two-block
range when ordering.
*Power supply not included
PF25
Passive In-Line Filter
Passive in-line RF filter with 25MHz passband. Designed
for use with VRMWB and VRField WB wide-band receiver
systems in cases where the full bandwidth of the receiver is
not needed. Specify block when ordering.
40
©Copyright 2013. Lectrosonics, Inc.
LECTROSONICS, INC.
Quality Products Since 1971
Remote Antennas
Accessories
Part Number: 21769
Part Number: ARG2RT
Description: Female BNC to Female
BNC Connector
Description: 24 inch coaxial RF cable with
right angle BNC male at both ends; commonly
used in portable “bag systems.”
Part Number: 21770
Part Number: ARG15
Description:Male SMA to Female BNC
Adapter
Description: Cable, Mini Coax, 15ft.
Belden 9258
Part Number: 21793
Part Number: ARG25
Description: Male SMA to Female SMA
Right Angle Adapter
Description: Cable, Low-Loss Coax,
BNC/BNC, 25ft. Belden 9913F
Part Number: 28769
Part Number: ARG50
Description: Antenna Mounting Stud
Description: Cable, Low-Loss Coax,
BNC/BNC, 50ft. Belden 9913F
Part Number: 26311
Part Number: ARG100
Description: Thread Adapter, 1/2” Dia.
6” long, 3/8-16 Thread
Description: Cable, Low-Loss Coax,
BNC/BNC, 100ft. Belden 9913F
Part Number: 26312
Part Number: ARX125
Description: Thread Adapter, 1/2” Dia. 1
3/4” Long, 3/8-16 & 1/4-20 Threads
Description: Cable, Belden 9258,
BNC/BNC, 125ft. Requires RF
amplifier like UFM230
Part Number: 26313
Part Number: BIAST
Description: Mic Stand Adapter, 1 1/2”
Long, 5/8-27 & 3/8-16 Threads
Description: DC Power Supply, Inline,
for UFM50, UFM230
Part Number: ACOAXBNC
(Specify Block)
Description: Coax Cable Antenna,
Right Angle BNC, 48”, Specify Block
Part Number: PALP600
Description: Pouch for ALP Antennas,
Zippered Cordura
Part Number: ALP700RK
Part Number: ZSC24
Description: Rod Repair Kit for
ALP700/ALP700A
Description: Passive Splitter, 2-way
Part Number: ALPKIT
Part Number: ZFSC41
Description: Accessory Mounting Kit for
ALP/SNA
Description: Passive Splitter, 4-way
Part Number: ARG2
Part Number: ZFSC843
Description: Antenna Cable, Mini Coax,
2ft
Description: Passive Splitter, 8-way
www.lectrosonics.com
©Copyright 2013. Lectrosonics, Inc.
41
Made In The USA By A Bunch Of Fanatics
42
©Copyright 2013. Lectrosonics, Inc.
LECTROSONICS, INC.
Quality Products Since 1971
Jon-Eric
Sanchez
Fanatic Since 2008
Machine Shop
www.lectrosonics.com
©Copyright 2013. Lectrosonics, Inc.
43
Made In The USA By A Bunch Of Fanatics
IFBR1a
IFB System
Compact IFB Belt-Pack Receiver
• Preset frequency can be set without power or signal
• Scan mode stores up to five additional frequencies
• Multi-color LED and rotary control for programming and
operation
• High sensitivity for extended operating range indoors
or outdoors
• Rugged machined aluminum housing with attached
battery door
• Long battery life
The IFBR1a portable receiver provides simplicity and flexibility in a package that is intuitive for untrained users to
operate. Five programmable operating frequencies can be
accessed simply by pressing down on the volume knob. The
unit is housed in a rugged machined aluminum package and
comes complete with a belt clip pouch. An optional springloaded belt clip (BezelkitR1a) provides a secure mounting on
a wide variety of belts, pockets and fabrics.
IFBT4
Digital Hybrid Compact IFB Transmitter
• Digital Hybrid Wireless® for compandor-free audio
• 250 mW power output for long range use
• Multi-use XLR input jack and built-in mic preamp
• DIP switch programmable intercom input
• Tuning mode for frequency scrolling
• Compact size and rugged, metal construction
• Includes CH20 power supply
The IFBT4 is a 250mW Digital Hybrid Wireless® base-station
transmitter for IFB and other types of radio links. It is compatible with all Lectrosonics 100, 200, 400, and IFB receivers,
along with receivers from two other manufacturers. In 400
mode, the IFBT4 and associated receivers operate without
analog companding artifacts.
The IFBT4 is designed for use in broadcast, motion picture,
theater and stage applications where extended operating
range and high-quality audio are essential. The IFBT4 can be
used as part of a stand-alone system or patched directly into
popular intercom systems.
44
©Copyright 2013. Lectrosonics, Inc.
LECTROSONICS, INC.
Quality Products Since 1971
IFB Systems
Accessories
Part Number: 21586
Part Number: ARG25
Description: Locking Power Plug W/6 ft.
Pigtail, DC16A
Description: Cable, Low-Loss Coax,
BNC/BNC, 25ft. Belden 9913F
Part Number: 26289
Part Number: ARG50
Description: Panel, blank, for RMP195/
SDM4D/RDM4 rack mount
Description: Cable, Low-Loss Coax,
BNC/BNC, 50ft. Belden 9913F
Part Number: A500RA (Specify Block)
Part Number: ARG100
Description: Antenna, UHF, Right Angle
BNC (Specify Block)
Description: Cable, Low-Loss Coax,
BNC/BNC, 100ft. Belden 9913F
Part Number: A500S
Part Number: BEZELKITR1A
Description: Antenna, UHF, Flexible,
Straight BNC 470-608 MHz
Description: Kit, Belt Clip, Bezel,
Frequency Door for IFBR1a Receiver
Part Number: A8U (Specify Block)
Part Number: CH20
Description: Antenna, UHF, Straight
BNC (Specify Block)
Description: Power Supply, 110VAC in,
12VDC Regulated out, 400mA
Part Number: CCMINI
Part Number: IFBR1KIT
Description: Zip Pouch for Compact
Wireless System
Description: Top bezel replacement kit
for IFBR1a receiver
Part Number: BATTSLED
Part Number: MC55
Description: General purpose battery
adaptor. Optional spring loaded clip is
available. BATTERY NOT INCLUDED
Description: Adapter Cable, 15”, Unbalanced
Line-Level Mini Right-Angle Plug to Balanced
Mic Level (45dB Attenuation). Includes
Capacitors to block DC
Part Number: ACOAXBNC
(Specify Block)
Part Number: PR1A
Description: Coax Cable Antenna,
Right Angle BNC, 48”, Specify Block
Description: Pouch for IFBR1/a
Receiver
Part Number: ARG2
Part Number: PS200
Description: Antenna Cable, Mini Coax,
2ft. Belden 9258
Description: Power Cable, 12”, Hirose4
to LZR
Part Number: ARG2RT
Part Number: PSLZRDUAL
Description: 24 inch coaxial RF cable with
right angle BNC male at both ends; commonly
used in portable “bag systems.” Belden 8216
Description: LZR style plug to LZR
style plug. 6 ft. power cable
Part Number: ARG15
Part Number: RMP195
Description: Cable, Mini Coax, 15ft.
Belden 9258
Description: 4 Channel Rack Mount for
Base Station Receivers
www.lectrosonics.com
©Copyright 2013. Lectrosonics, Inc.
45
Made In The USA By A Bunch Of Fanatics
Charlie
Wright
Fanatic Since 1997
Service & Repair Dept.
46
©Copyright 2013. Lectrosonics, Inc.
LECTROSONICS, INC.
Quality Products Since 1971
www.lectrosonics.com
©Copyright 2013. Lectrosonics, Inc.
47
Made In The USA By A Bunch Of Fanatics
Digital Matrix Processors
ASPEN Series DSP
Single Point of Control
Reliability
ASPEN offers simultaneous native and 3rd party system
control from a single, central point.
When your audio system absolutely must not fail.
The ASPEN protocol supports simultaneous use of Ethernet,
USB and RS232 ports by the PC software control panel and
a third-party serial control system such as AMX® or Crestron®.
Installers and operators can use the GUI to monitor the
state of the ASPEN device for the purpose of verifying that
commands sent from the 3rd-party controller (over RS232)
are working correctly. Commands to the master unit are
conveyed to all other units in the chain automatically via the
ASPEN port.
Superior Sound Quality and
Performance
Studies show that Lectrosonics DSP units are consistently
rated as “best” in sound quality by actual system operators.
High-resolution microphone preamps, low latency, centralized echo cancellation and Optimized Architecture give
ASPEN the edge in performance and sound quality. With
a maximum near-side latency of 1.46 ms for the first unit
and only 0.25 ms max for each additional unit in the chain,
conversations always flow easily and transparently. True 48
Volt phantom powering (conforms to IEC 61938) provides you
with the ability to use studio-quality microphones in any application. When your installation demands pristine sound quality,
or even when you simply don’t want to compromise the audio,
ASPEN gives you the tools you need.
TCP/IP Addressable
Connect ASPEN with Ethernet, give it an address, and
it’s part of your network.
The ASPEN port provides 1Gbps throughput capability for
audio and control data over a single CAT6 line. All units in
the network can be accessed in real time with the associated software.
48
©Copyright 2013. Lectrosonics, Inc.
Lectrosonics is well-regarded in the film production &
broadcast markets for providing the most robust and reliable
equipment in the industry. ASPEN is the 4th generation of
audio processing products from Lectrosonics and takes
this concept even further, being designed with special care
towards critical component choice, manufacturing methods
and attention to detail. 100% of Lectrosonics’ products are
made in-house in the U.S.A. In addition, 100% of these
products are tested for quality in multiple stages before
ever leaving the factory. ASPEN products now come with a
3-year, all-inclusive, warranty.
Centralized Echo Cancellation
An important part of any teleconferencing system, done
beautifully.
A centralized echo canceller, possible only with a Proportional Gain Automixer, concentrates extensive DSP power
towards total system echo cancellation. The result is faster
convergence, excellent system performance, low latency and
reasonable cost. Centralized Echo Cancellation also does
not require the system to be “trained” before it works properly and allows an unlimited number of inputs. One further
benefit is bridging support for use in Telepresence systems.
Seamless Auto-Mixing with PGA™
The Proportional Gain Algorithm used in the ASPEN
series provides lightning-quick, transparent mixes.
Gate-based auto-mixing systems can clip words, modulate
the noise floor, and aggravate feedback problems. Lectrosonics has pioneered the application of proportional gain
automatic mixing at the matrix crosspoint – a much more
sophisticated and elegant way to handle automatic mixing.
LECTROSONICS, INC.
Quality Products Since 1971
SPN2412
ASPEN Series DSP
24 Input/12 Output Digital Matrix Processor
Ideal for large number of inputs in automated sound reinforcement systems. Every input can be routed to any or all
outputs. The same patented proportional gain algorithm allows for greatly increased intelligibility and gain before feedback in sound reinforcement systems such as in churches,
boardrooms and teleconferencing, without glitches.
• 24 mic/line inputs
• 12 outputs
• 48-bus matrix
• PGA auto-mixing
• True 48 V phantom
All ASPEN matrix units have 256 macros
available with a selection of sample
macros pre-programmed.
• High-resolution mic preamps
• Individual input channel noise reduction
SPN1624
16 Input/24 Output Digital Matrix Processor
Ideal for large-scale automated sound reinforcement systems. Every input can be routed to any or all outputs. The
same patented proportional gain algorithm allows for greatly
increased intelligibility and gain before feedback in sound
reinforcement systems such as in churches, boardrooms and
teleconferencing, without glitches.
• 16 mic/line inputs
• 24 outputs
• 48-bus matrix
• PGA auto-mixing
• True 48 V phantom
All ASPEN matrix units have a built-in signal
generator including pink noise, white noise,
sweep and tone.
www.lectrosonics.com
• High-resolution mic preamps
• Individual input channel noise reduction
©Copyright 2013. Lectrosonics, Inc.
49
Made In The USA By A Bunch Of Fanatics
SPN1612
ASPEN Series DSP
16 Input/12 Output Digital Matrix Processor
• 16 mic/line inputs
• 12 outputs
• 48-bus matrix
• PGA auto-mixing
• True 48 V phantom
Perfect for medium-sized systems, the SPN1612 features a
scalable digital matrix mixer allowing every input to be routed
to any or all outputs. The proportional gain automatic mixing
algorithm allows for greatly increased intelligibility and gain
before feedback in sound reinforcement applications such as
in churches, boardrooms and teleconferencing.
• High-resolution mic preamps
All ASPEN matrix units include five auto mix
modes, selectable at each cross point.
• Individual input channel noise reduction
SPN812
8 Input/12 Output Digital Matrix Processor
• 8 mic/line inputs
• 12 outputs
• 48-bus matrix
• PGA auto-mixing
• True 48 V phantom
Ideal for small to medium-sized installations with up to eight
sources including microphones. The SPN812 features a
scalable digital matrix mixer allowing every input to be routed
to any or all outputs. Automatic microphone mixing using a
proportional gain algorithm allows for greatly increased intelligibility and gain before feedback in sound reinforcement
systems.
• High-resolution mic preamps
• Individual input channel noise reduction
50
©Copyright 2013. Lectrosonics, Inc.
All ASPEN matrix units feature 48 mix busses
with full output matrixing.
LECTROSONICS, INC.
Quality Products Since 1971
SPN32i
ASPEN Series DSP
32 Channel Input-Only Unit
An input-only unit with 32 additional mic/line inputs, each with
48V phantom power available.
• 32 mic/line inputs
• True 48 V phantom
• High-resolution mic preamps
All ASPEN units feature individual input
channel EQ, noise reduction, true 48 V
phantom power, delay and compression.
• Individual input channel noise reduction
SPN16i
16 Channel Input-Only Unit
An input-only unit with 16 additional mic/line inputs, each
with 48V phantom power available.
• 16 mic/line inputs
• True 48 V phantom
All ASPEN units have AMX and
Crestron® modules available for
controller-based systems.
®
www.lectrosonics.com
• High-resolution mic preamps
• Individual input channel noise reduction
©Copyright 2013. Lectrosonics, Inc.
51
Made In The USA By A Bunch Of Fanatics
SPNTrio Wideband
ASPEN Series DSP
8 Input/12 Output Mixer With Multi-Port Conference Interface
• 8 mic/line inputs
• PGA auto-mixing
• True 48 V phantom
• 48-bus matrix
• Advanced Wideband AEC (Acoustic Echo Cancelation)
• 2 power amp channels
The Trio combines patented proportional gain auto mixing
with a teleconferencing unit and a power amplifier to provide
a single-box solution for conferencing. 8 mic/line inputs, 1
TELCO input, and 2 CODEC inputs (line level), 12 Outputs
(4 of which are mic/line level switchable), 1 TELCO output,
and 2 CODEC outputs (line level).
All ASPEN matrix units feature individual
output delay and EQ with Butterworth, Bessel
or Linkwitz-Riley filter characteristics.
SPNConference Wideband
Multi-Port Conference Interface
• Advanced Wideband AEC (Acoustic Echo Cancelation)
• 2 power amp channels
• Ultra-low near-side latency
The SPNConference is used with an ASPEN mixer
to combine far-end audio with a local sound system
and integrate the signals into the ASPEN matrix. The
ASPEN Acoustic Echo Cancellation (AEC) addresses
the growing need for a single acoustic echo canceller
to handle the challenges of multi-site bridging (such as for
telepresence) and an unlimited number of microphones.
52
©Copyright 2013. Lectrosonics, Inc.
The AEC in combination with the patented gain proportional
mixing algorithm provides outstanding audio quality without
echo heard at the far ends.
A two-channel power amplifier is included for loudspeakers
in the local sound system.
The power amplifier is driven by final mix outputs from the
matrix and has a full set of signal processing, including
delay, parametric EQ, compressor and limiter.
All ASPEN matrix units include individual
output compression/limiting and gain control.
LECTROSONICS, INC.
Quality Products Since 1971
SPNDNT
ASPEN Series DSP
The SPNDNT network interface combines Dante networked
digital audio with the ASPEN digital matrix for outstanding
flexibility in signal routing and system configuration. The processor includes an Audinate Brooklyn II circuit board module
to function as a native Dante device using standard ethernet
switches.
• 32 DanteTM Network Send Channels
• 32 DanteTM Network Receiving Channels
• 1 GB/s ASPEN bus
The SPNDNT is compliant with AVB
as well as 100Mbps ethernet
Audinate® is a registered trademark of Audinate Pty Ltd.
Dante™ is a trademark of Audinate Pty Ltd.
DNTBOB 88
BOB 88 is a high quality, general purpose interface to
transmit and receive line level analog audio signals via
a Dante network. Analog inputs are converted to digital
and appear on the network as transmit channels. Audio
for the analog outputs is taken from subscriptions to
transmit channels on the network from other sources.
When connected to a network, each break out box will
appear as a separate device in the Dante Controller
software interface.
• 8 balanced line level analog inputs
• 8 balanced line level analog outputs
• DanteTM primary and secondary ports
• 8 DanteTM network outputs
• 8 DanteTM network inputs
• Uses standard ethernet hardware
• Gigabit compatible
• AVB ready
iPad Developers Toolkit
Viewer 3.3, a free software download available online the
Apple App Store, has already received rave reviews for its
ability to transform an iPad into a control interface for home
or commercial automated systems where units in the system
are addressed via TCP/IP over Ethernet. Developers can
use iViewer for free with a single landscape-oriented and a
single portrait-oriented page. Multi-page designs require a
licensing fee.
The iPad developer’s kit includes sample configurations
and tutorial videos, and is available for download from the
Lectrosonics web site in the Aspen Support area.
www.lectrosonics.com
©Copyright 2013. Lectrosonics, Inc.
53
Made In The USA By A Bunch Of Fanatics
ASPEN Software
ASPEN Series DSP
All ASPEN models support simultaneous use of Ethernet, RS232 and USB ports for setup, monitoring, diagnostics and control.
Installers and operators can use the software GUI to monitor the state of the processor via the USB port to verify that commands sent from the 3rd party controller (over RS232) are working correctly. Remote monitoring and setup can be conducted
via a network connection and from remote sites over the internet.
ASPEN Matrix
ASPEN Filters
Try the new ASPEN 2.0 GUI Available for download now!
ASPEN Conference
54
©Copyright 2013. Lectrosonics, Inc.
LECTROSONICS, INC.
Quality Products Since 1971
ASPEN Series DSP
Accessories
Part Number: 21499
Part Number: 24719
Description: Power Cable 60320 C13
to Edison
Description: Cable Wrap, Velcro®, Blue,
w/Lectro Logo
Part Number: 21552
Part Number: 35679
Description: Cable, 15ft, Wall to Phone
Description: Lectrosonics Screwdriver
Part Number: 21558
Part Number: DB2CAT5SPN
Description: Plug, Female D-25 Pin
Description: Adapter for pre-wired connections between processor logic ports
and the RCWPB8 remote control
Part Number: 21580
Part Number: RCWPB4
Description: Plug, 5 Position, Depluggable
Description: Remote Control for audio
processors, Four Buttons, LEDs, cover
plate included
Part Number: 21642
Part Number: RCWPB8
Description: Euro Power Cord CEE 7/7
(Schuko) plug
Description: Pushbutton Remote Control, single Decora standard
(Decora cover plate not included)
Part Number: 21643
Part Number: RCWPB8DESK
Description: UK Power Cord BS
1363 plug
Description: Versatile remote control
for ASPEN and DM Series processors
through the logic I/O ports
Part Number: 21644
Part Number: RCWTH4
Description: Australian Power Cord
S3112 plug
Description: Remote Control for SPN
Conference, Desktop Style
Part Number: 21802
Part Number: RCWVLS
Description: 12” Cat-6 cable for connecting ASPEN units
Description: Remote Volume Control
for AM, DM, and ASPEN Series, Cover
plate included
Part Number: XLR8
Description: Jack Panel, XLR and RCA
Inputs/Outputs
www.lectrosonics.com
©Copyright 2013. Lectrosonics, Inc.
55
Made In The USA By A Bunch Of Fanatics
DM1624F
DM Series DSP
16X24 Digital Matrix Automixer
• 16 mic/line inputs, 24 line outputs
(8 outputs are mic/line switchable)
• Proportional gain auto mixing algorithm with AutoSkew™ US Patent 5,414,776 and 5,402,500
• No “horsepower” limitations - all functions available all
the time, regardless of expansion
• 128 macros available for storing up to 64 commands per
macro
• USB, RS-232 interfaces for setup and control
• Digital I/O ports for “daisy chaining” and to connect other
LecNet 2 devices
The DM1624F is a 16-in, 24-out digital matrix mixer/processor ideal for large-scale automated sound reinforcement
systems. Every input can be routed to any or all outputs. The
proprietary automatic microphone mixing using Adaptive
Proportional Gain™ algorithm allows for greatly increased
intelligibility and gain before feedback in sound reinforcement
systems such as in churches, boardrooms and teleconferencing, without glitches. Each input can incorporate up to
6 filter stages plus compressor, feedback elimination and
delay. Each output provides optional delay, up to 9 filters and
compression/limiting.
• AMX© and CRESTRON® compatible
• Simultaneous LecNet2 and Third-Party control
DM1612F
16X12 Digital Audio Matrix Mixer
• 16 mic/line inputs, 12 line outputs
(4 outputs are mic/line switchable)
• Proportional gain auto mixing algorithm with
AutoSkew™ - US Patent 5,414,776 and 5,402,500
• Auto mixing operates at the output of the matrix - each
input channel can participate differently in each output
mix
• 128 macros available for storing up to 64 commands
per macro
Perfect for medium-sized installations, the DM1612F features
a 16-in, 12-out digital matrix mixer allowing every input to be
routed to any or all outputs. The proportional gain automatic
mixing algorithm allows for greatly increased intelligibility and
gain before feedback in sound reinforcement applications
such as in churches, boardrooms and teleconferencing. Each
input can incorporate up to 6 filter stages plus compressor,
ADFE and delay. Each output provides delay, up to 9 filters
and compression/limiting.
• USB and RS-232 interfaces for setup and control
• Digital I/O ports for “daisy chaining” and to connect
other LecNet 2 devices
• AMX© and CRESTRON® compatible
• Simultaneous LecNet2 and Third-Party control
56
©Copyright 2013. Lectrosonics, Inc.
LECTROSONICS, INC.
Quality Products Since 1971
DM812
DM Series DSP
8X12 Digital Audio Matrix Mixer
Ideal for small to medium-sized installations with up to eight
sources including microphones. The DM812 features an 8-in,
12-out digital matrix mixer allowing every input to be routed
to any or all outputs. Automatic microphone mixing using a
proportional gain algorithm allows for greatly increased intelligibility and gain before feedback in sound reinforcement
systems. Each input can incorporate up to 6 filter stages plus
compressor, ADFE and delay. Each output provides delay,
up to 9 filters and compression/limiting.
• 8 mic/line inputs, 12 line outputs (4 outputs are mic/line
switchable)
• Proportional gain auto mixing algorithm with AutoSkew™ US Patent 5,414,776 and 5,402,500
• Auto mixing operates at the output of the matrix - each
input channel can participate differently in each output
mix
• 128 macros available for storing up to 64 commands per
macro
• USB and RS-232 interfaces for setup and control
• Digital I/O ports for “daisy chaining” and to connect other
LecNet 2 devices
• AMX© and CRESTRON® compatible
• Simultaneous LecNet2 and Third-Party control
DM84
8X4 Digital Audio Matrix Mixer
Perfect for smaller applications where a few microphones or
audio sources are needed.
The DM84 features an 8-in, 4-out digital matrix mixer allowing every input to be routed to any or all outputs. Seamless
automatic microphone mixing allows for greatly increased
intelligibility and gain before feedback in sound reinforcement
systems such as in churches, boardrooms and teleconferencing. Programmable front-panel knobs allow for intuitive adjustment while in operation.
www.lectrosonics.com
• 8-in/4-out digital matrix architecture
• Stackable with enlarged matrix up to 800 x 14
• USB and RS-232 interfaces for setup and control
• Fully balanced audio signal flow through entire system
• Proportional gain auto mixing algorithm with AutoSkew™ US Patent 5,414,776
• AMX© and CRESTRON® compatible
• Simultaneous LecNet2 and Third-Party control
©Copyright 2013. Lectrosonics, Inc.
57
Made In The USA By A Bunch Of Fanatics
DMTH4
DM Series DSP
Digital Telephone Hybrid Processor
The DMTH4 is a 3-in, 24-out digital matrix mixer that
integrates telephone lines, video codecs and external audio
sources into the digital bus structure of DM Series processors so these sources operate as additional microphone or
audio inputs in the sound system.
Centralized acoustic echo cancellation converges quickly
and reduces near-side latency to 2ms. Two echo cancellers
are provided, one for the CODEC and one for the TEL connection.
• 3-in/24-out digital matrix architecture
• Fully integrates with DM Series processors
• Telephone, codec and auxiliary inputs and outputs
• Two Acoustic Echo Cancellers - 126 ms tail time
• Line echo canceller - 30 ms tail time
• USB and RS-232 interfaces for setup and control
• Digital I/O ports for “daisy chaining” and to connect other
LecNet 2 devices
• Proportional gain auto mixing algorithm with AutoSkew™ US Patent 5,414,776
• Simultaneous LecNet2 and Third-Party control
DMPA12
12 Channel Digital Audio Amplifier
The DMPA12 is a digital 12-channel power amplifier and
DSP processor in a 1RU, 19” rack enclosure. Audio inputs
are taken from the final master mix signals on the digital bus.
These final mix signals can then be processed individually at
each output channel to apply delay, filters, compression and
limiting.
• 12-channel class-D power amp with bridge tied load (BTL)
• 10 Watts RMS per channel; adjacent channels can be tied
together for doubled output power
• Every output channel includes a DSP delay, nine filters,
compressor and limiter
• Passively cooled for quiet operation
• Inputs are taken from the Lecnet 2 DANI™ bus forward or
backward propagated final mix signals - no analog inputs
are provided
• Front panel level controls and LED signal status indicators
• Only compatible with LecNet2 DM components
58
©Copyright 2013. Lectrosonics, Inc.
LECTROSONICS, INC.
Quality Products Since 1971
DM Series DSP
LecNet2™ Software
LecNet2™ software is a user-friendly powerful software package designed for easy setup and control of Lectrosonics’
DM Series Digital Audio Matrix Mixers and Venue Receivers. LecNet2™ is used primarily for system setup, with the
configuration saved both in a file and into the unit’s memory
for actual operation. Once configured, the units run without
a host computer. LecNet2™ runs under Windows XP 32-bit,
Vista 32-bit, and Windows 7 32-bit & 64-bit systems.
DM Matrix Settings
VRPanel for Venue receiver (See page 34)
DM Channel Activity
www.lectrosonics.com
©Copyright 2013. Lectrosonics, Inc.
59
Made In The USA By A Bunch Of Fanatics
Accessories
DM Series DSP
Part Number: 21499
Part Number: 24719
Description: Power Cable 60320 C13
to Edison
Description: Cable Wrap, Velcro®, Blue,
w/Lectro Logo
Part Number: 21552
Part Number: 35679
Description: Cable, 15ft, Wall to Phone
Description: Lectrosonics Screwdriver
Part Number: 21558
Part Number: DB2CAT5
Description: Plug, Female D-25 Pin
Description: Adapter for pre-wired connections between processor logic ports
and the RCWPB8 remote control
Part Number: 21580
Part Number: RCWPB4
Description: Plug, 5 Position, Depluggable
Description: Remote Control for audio
processors, Four Buttons, LEDs, cover
plate included
Part Number: 21642
Part Number: RCWPB8
Description: Euro Power Cord CEE 7/7
(Schuko) plug
Description: Pushbutton Remote Control, singl decora standard
(Decora cover plate not included)
Part Number: 21643
Part Number: RCWPB8DESK
Description: UK Power Cord BS
1363 plug
Description: Versatile remote control
for ASPEN and DM Series processors
through the logic I/O ports
Part Number: 21644
Part Number: RCWTH4
Description: Australian Power Cord
S3112 plug
Description: Remote Control for SPN
Conference, Desktop Style
Part Number: 21710-1
Part Number:RCWVLS
Description: AMX/Crestron Cable
Description: Remote Volume Control
for AM, DM, and ASPEN Series, Cover
plate included
Part Number: 21713
Part Number: XLR8
Description: Cable, standard USB A2B
Description: Jack Panel, XLR and RCA
Inputs/Outputs
Part Number: 21716
Description: Cable, CAT5 RJ 45, 12”
60
©Copyright 2013. Lectrosonics, Inc.
LECTROSONICS, INC.
Quality Products Since 1971
www.lectrosonics.com
©Copyright 2013. Lectrosonics, Inc.
61
Made In The USA By A Bunch Of Fanatics
PA8
Analog Audio
8 Channel Power Amplifier
• 8 separate amplifier channels in 1RU
• 10 Watts RMS per channel into 4 Ohms in non-bridged
mode, 20 Watts RMS per channel bridged into 8 Ohms
• Passively cooled for silent operation
• Full short circuit and thermal overload protection
The PA8 8 Channel Power Amplifier is a unique single rackspace solution for zoned, distributed loudspeaker systems.
The PA8 has eight separate power amplifiers, each with an
output power capability of 10W (4 Ohms) or 6W (8 Ohms)
RMS. The PA8 is passively cooled, and features full shortcircuit and thermal overload protection. The amplifier outputs
are muted at turn-on and turn-off, to eliminate transients.
XLR8
Adapter Panel
• Provides standard XLR and RCA connectors for
Lectrosonics automatic mixers
• 8 balanced XLR inputs
• Alternate RCA jacks on 2 inputs
• Balanced XLR output
• Dual mono RCA outputs
• Switchable - 10dB output attenuator on RCA jacks
• Depluggable connectors on rear
The XLR8 adapter panel acts as an interface between the
AM, DM and Aspen-series processors and standard XLR
and RCA connectors on the front panel of the unit. This
allows these mixers to be used in rental, staging, or mobile
applications where audio cables are connected and disconnected frequently. The panel is often mounted either on the
front or rear of an ATA-style case or other rack mount.
Lectrosonics 3-pin de-pluggable connectors (P/N 21531) are
used to interconnect the XLR8 panel with the mixer.
Inputs 7 and 8 offer RCA jacks as an alternative to the XLR
connectors for use with MP3 players or other audio equipment. Slide switches located on the rear of the panel select
either the RCA or XLR jack as the active input.
62
©Copyright 2013. Lectrosonics, Inc.
LECTROSONICS, INC.
Quality Products Since 1971
Analog Audio
Accessories
Part Number: 21500
Part Number: 21552
Description: Plug, 10 Position, w/Screw
Terminals, Depluggable
Description: Cable, 15ft, Wall to Phone
Part Number: 21505
Part Number: 21553
Description: Plug, 7 Position, w/Screw
Terminals, Depluggable
Description: Jack, Male, 9-pin D-Sub
Part Number: 21529-1
Part Number: 21554
Description: Cable, RS232, DB9/3.5mm Stereo Plug
Description: Shell, Plug, 9-pin D-Sub
Part Number: 21531
Part Number: 21580
Description: Plug, 3 Position, for 21530,
BEAU, 86053
Description: Plug, 5 Position, Depluggable
Part Number: 21537
Part Number: 21592
Description: Jack, D-Submini, M-15P,
Panel Mount
Description: 24” Cable, 8-pin, Mini-DIN
to Mini-DIN
Part Number: 21538
Part Number: 21607
Description: Shell, Plug, for D-Submini
15-Pin
Description: Plug, 3 Position, w/Screw
Terminals, Depluggable
Part Number: 21548
Part Number: RCWVLS
Description: Plug, 4 Position, Depluggable, for 21549
Description: Remote Volume Control for
AM, DM Series
Part Number: 21551
Description: 12” Cable, 8-pin Mini-DIN
to Mini-DIN
www.lectrosonics.com
©Copyright 2013. Lectrosonics, Inc.
63
Made In The USA By A Bunch Of Fanatics
64
©Copyright 2013. Lectrosonics, Inc.
LECTROSONICS, INC.
Quality Products Since 1971
Carla
Zamora
Fanatic Since 2004
Surface Mount
Electronics
www.lectrosonics.com
©Copyright 2013. Lectrosonics, Inc.
65
Made In The USA By A Bunch Of Fanatics
IS400
Systems/ Packages
Wireless Instrument System
The IS400 with Digital Hybrid Wireless® technology sets new
standards for wireless instrument systems. Flat frequency
response, low distortion and compandor-free operation
provides the closest thing to using a high-quality, short instrument cable. The IS400 reproduces the lowest fundamental
from a 5-string bass (low B) up to the very highest overtones
and harmonics. The IS400 can be paired with instrument
cables such as the MI39A, microphones, or contact pickups
depending on the application.
The standard Instrument System uses an LMa Transmitter,
but several other transmitter models may also be used as
part of the IS400.
• Digital Hybrid Wireless® for Compandor-free audio
• 256 synthesized UHF frequencies in each of 9 available
blocks
• Rugged all-metal construction
• Independent XLR and 1/4” audio outputs
• SmartTune™ with graphic display for easy selection of
clear RF frequencies
• Level indicators for precise gain adjustment
• 50 mW RF output for long range and
dropout-free performance
For multi-channel systems, the Venue receiver can be used.
Recommended Cables for Pickup/Transmitter
Transmitter
g
Pickup Type i
Acoustic
Standard-Input Transmitters
IM
Current Servo-Input Transmitters
LM
UM400
LMa
UM400a
SM Series
MI39A
MI39A
MI39A
MI33P
MI33P
MI33P
MI33P
Specifies acoustic
instruments with
exceptionally high output
levels or low impedance
outputs.
MI39A
MI39A
(or MI33A)
(or MI33A)
(or MI33A)
MI39A
MI39A
MI39A
Most guitars & basses
with passive pickups
including high-output
passive pickups.
MI33P
MI33P
MI33P
MI33P
MI33P
MI33P
Instruments equipped
with active pickup
systems with lowimpedance outputs.
MI39A
MI39A
MI39A
(or MI33A)
(or MI33A)
(or MI33A)
MI33P
MI33P
MI39A
Acoustic
High-Level
Electric
Electric
Active
66
Notes:
For most acoustic
instruments, using a
soundhole pickup, or
with built-in EQ/preamps.
Example: Taylor guitars
with ES.
©Copyright 2013. Lectrosonics, Inc.
LECTROSONICS, INC.
Quality Products Since 1971
IS400
Systems/ Packages
Wireless Instrument System
“Neal is extremely pleased
with the sound quality of
the Lectrosonics equipment—it’s clear and
extremely articulate. In
all the time I’ve used the
IS400 with Slash and, now
Neal, I haven’t experienced
a single RF issue. This
includes literally hundreds
of shows in clubs, arenas,
stadiums, and outdoor
venues.”
— Adam Day, guitar tech
for Neal Schon.
Photo by Matt Becker, [email protected]
IS400 Users Include:
Malcolm Young - AC/DC
Ricky Phillips - Styx
Dixie Chicks
Carlos Santana
Slash
Johnny Hiland
Neal Schon
Taylor Guitars
Dan Crary
Ricky Martin Band
Pearl Jam
John Fogerty
Bob Weir
The Killers
Alex Lifeson
George Pajon - Black Eyed Peas
Foreigner
Jerry Horton - Papa Roach
k.d. lang
Ziggy Marley
www.lectrosonics.com
©Copyright 2013. Lectrosonics, Inc.
67
Made In The USA By A Bunch Of Fanatics
TM400
Systems/ Packages
Wireless System For Test & Measurement
• Replaces long cable between calibrated microphone and
test equipment
• Digital Hybrid Wireless® for compandor-free audio
• Rugged all-metal construction
• SmartTune™ with graphic display for easy selection of
clear RF frequencies
• Transmitter converts microphones with XLR jacks to
wireless operation
• Selectable 5, 15, 48 Volt microphone powering
• 100 mW RF output power for long range
The TM400 system was designed to provide the ideal link
between calibrated test microphones and measurement
equipment such as SIM®, SIA SMAART Live®, TEF® or other
systems. By using a radio link, long cables can be eliminated
thus saving time and providing opportunities for additional
measurements to increase accuracy. The microphone can
even be moved around in the venue while the audience is
present – something that is impossible with a cabled
measurement microphone.
The employed Digital Hybrid Wireless® technology has some
very beneficial properties. Because the information being
transmitted is digitally encoded, usable dynamic range is
much higher than an analog system can offer and there
is no compandor in the audio signal to interfere with your
measurements.
The TM400 system comes standard with the HM transmitter,
R400A receiver, and CCTM400 water-resistant case.
However, the components can also be ordered separately.
Also, the R400A receiver can be ordered with a rack-mount
front panel, at an additional cost.
The Venue receiver can be used for multi-channel systems.
Microphone not included.
68
©Copyright 2013. Lectrosonics, Inc.
LECTROSONICS, INC.
Quality Products Since 1971
Modular Portable Receiver Blocks Available
References
Frequency
Block
Frequency
Range:
NTSC TV
Channels
PAL D TV
Channels
Color:
470
19
20
21
22
23
606
24
25
26
27
28
29
30
779
31
32
33
806
ISM
944
470.1 - 495.6
14-18
21-24
Black
486.4 - 511.9
16-20
23-26
Black
512.0 - 537.5
21-25
26-29
Black
537.6 - 563.1
25-29
29-32
Brown
563.2 - 588.7
29-33
32-35
Red
588.8 - 614.3
33-36
35-39
606.5 - 631.5
37
38
Black
614.4 - 639.9
38-42
39-42
Yellow
640.0 - 665.5
42-46
42-45
Green
665.6 - 691.1
46-50
45-48
Blue
691.2 - 716.7
50-54
48-51
Violet
716.8 - 742.3
55-59
51-55
Gray
742.4 - 767.9
59-63
55-58
White
768.0 - 793.5
N/A
58-61
Black
779.12 - 809.75
N/A
61-63
Black
793.6 - 819.1
N/A
63-64
Black
819.2 - 844.7
N/A
64-67
Black
844.8 - 861.9
N/A
67-69
Black
806.1 - 809.75
N/A
N/A
Black
902 - 928
N/A
N/A
None
944.1 - 951.9
N/A
N/A
Black
VRField
WBL
VRField
WB
VRS
VRT
Octopack
L
Octopack
M
Octopack
H
D4R
Orange
Studio Receiver Blocks Available
Frequency
Block
Frequency
Range:
NTSC TV
Channels
PAL D TV
Channels
Color:
470
19
20
21
22
23
606
24
25
26
27
28
29
30
779
31
32
33
806
ISM
944
470.1 - 495.6
14-18
21-24
486.4 - 511.9
16-20
23-26
Black
512.0 - 537.5
21-25
26-29
Black
537.6 - 563.1
25-29
29-32
Brown
563.2 - 588.7
29-33
32-35
Red
588.8 - 614.3
33-36
35-39
Orange
606.5 - 631.5
37
38
Black
614.4 - 639.9
38-42
39-42
Yellow
640.0 - 665.5
42-46
42-45
Green
665.6 - 691.1
46-50
45-48
Blue
691.2 - 716.7
50-54
48-51
Violet
716.8 - 742.3
55-59
51-55
Gray
742.4 - 767.9
59-63
55-58
White
768.0 - 793.5
N/A
58-61
Black
779.12 - 809.75
N/A
61-63
Black
793.6 - 819.1
N/A
63-64
Black
819.2 - 844.7
N/A
64-67
Black
844.8 - 861.9
N/A
67-69
Black
806.1 - 809.75
N/A
N/A
Black
902 - 928
N/A
N/A
None
944.1 - 951.9
N/A
N/A
Black
VRM WBL
VRM WB
VRM
WBH
VRM
Narrow
VRT
R400a
Black
Licensing of wireless microphone equipment is the user’s responsibility, and licensability depends on the
user’s classification and application, and on the selected frequency. The user is strongly urged to contact
the appropriate telecommunications authority concerning proper licensing, and before choosing and ordering frequencies.
www.lectrosonics.com
VRS
USA Only
USA & EXPORT
EXPORT Only
©Copyright 2013. Lectrosonics, Inc.
69
Made In The USA By A Bunch Of Fanatics
Transmitter Frequency Blocks Available
Frequency
Block
Frequency
Range:
NTSC TV
Channels
PAL D TV
Channels
Color:
470
19
20
21
22
23
606
24
25
26
27
28
29
30
779
31
32
33
806
ISM
944
470.1 - 495.6
14-18
21-24
Black
486.4 - 511.9
16-20
23-26
Black
512.0 - 537.5
21-25
26-29
Black
537.6 - 563.1
25-29
29-32
Brown
563.2 - 588.7
29-33
32-35
Red
588.8 - 614.3
33-36
35-39
606.5 - 631.5
37
38
Black
614.4 - 639.9
38-42
39-42
Yellow
640.0 - 665.5
42-46
42-45
Green
665.6 - 691.1
46-50
45-48
Blue
691.2 - 716.7
50-54
48-51
Violet
716.8 - 742.3
55-59
51-55
Gray
742.4 - 767.9
59-63
55-58
White
768.0 - 793.5
N/A
58-61
Black
779.12 - 809.75
N/A
61-63
Black
793.6 - 819.1
N/A
63-64
Black
819.2 - 844.7
N/A
64-67
Black
844.8 - 861.9
N/A
67-69
Black
806.1 - 809.75
N/A
N/A
Black
902 - 928
N/A
N/A
None
944.1 - 951.9
N/A
N/A
Black
SMV/
SMQV
SMb/
SMDb
UM400a
References
WM
MM400c
LMa
HM
HH
IFBT4
D4T
Orange
Portable Receiver Frequency Blocks Available
Frequency
Block
Frequency
Range:
NTSC TV
Channels
PAL D TV
Channels
Color:
470
19
20
21
22
23
606
24
25
26
27
28
29
30
779
31
32
33
806
ISM
944
470.1 - 495.6
14-18
21-24
Black
486.4 - 511.9
16-20
23-26
Black
512.0 - 537.5
21-25
26-29
Black
537.6 - 563.1
25-29
29-32
Brown
563.2 - 588.7
29-33
32-35
Red
588.8 - 614.3
33-36
35-39
Orange
606.5 - 631.5
37
38
Black
614.4 - 639.9
38-42
39-42
Yellow
640.0 - 665.5
42-46
42-45
Green
665.6 - 691.1
46-50
45-48
Blue
691.2 - 716.7
50-54
48-51
Violet
716.8 - 742.3
55-59
51-55
Gray
742.4 - 767.9
59-63
55-58
White
768.0 - 793.5
N/A
58-61
Black
779.12 - 809.75
N/A
61-63
Black
793.6 - 819.1
N/A
63-64
Black
819.2 - 844.7
N/A
64-67
Black
844.8 - 861.9
N/A
67-69
Black
806.1 - 809.75
N/A
N/A
Black
902 - 928
N/A
N/A
None
944.1 - 951.9
N/A
N/A
Black
SR Series
UCR411a
UCR401
UCR100
Not all products or frequency blocks available in all countries. LICENSING INFORMATION: A ministerial
license to operate WIRELESS MICROPHONE EQUIPMENT may be required in certain areas. Consult your
national authority for possible requirements. Changes or modifications not expressly approved could void your
authority to operate the equipment.
70
©Copyright 2013. Lectrosonics, Inc.
IFBR1a
D4R
USA Only
USA & EXPORT
EXPORT Only
LECTROSONICS, INC.
Quality Products Since 1971
CH80 †
PS60E**†
DCR15/2AU†
DCR12/A4U†
DCR15/1A6U†
CH40
CH12
21644
21642
21499
CH20
AC Power Cords/Power Supplies
References
TRANSMITTERS
UM400*
UM400a*
UH400a*
UH400TM*
REFUM*
UM700*
PORTABLE RECEIVERS
SR Series
VR Field
UCR411a
UCR401
SixPack
QuadPack
OctoPack
UMCWB
STUDIO RECEIVERS
VRM
R400a
UDR700
D4 DIGITAL & QUADRA SYSTEMS
D4T
D4R
M4T
IFB SYSTEM
IFBT4
VHF
CR187
M187*
H187*
ASPEN SERIES
SPN812
SPN1612
SPN1624
SPN2412
SPN16i
SPN32i
SPNTrio
SPNConference
DM SERIES
DM1624
DM1612
DM812
DM84
DMTH4
DMPA12
AM SERIES
PA8
LONG RANGER 4
LR4
LR175
ACCESSORIES
Bias T
UFM230
UFM50
PF50
* Only when used with ISO9VOLT Battery Eliminator
** For countries using 200-220 VAC, 50 Hz power.
† Requires IEC-type power cord. Part #21499, 21642 or 21644
www.lectrosonics.com
©Copyright 2013. Lectrosonics, Inc.
71
Made In The USA By A Bunch Of Fanatics
Consumer Alert - FCC Order DA 10-92
Most users do not need a license to operate this wireless system. Nevertheless, operating this microphone system without
a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power
level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers
should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject
to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless
microphone website at www.fcc.gov/cgn/wirelessmicrohones.
FCC CONSUMER ADVISORY
OPERATION OF WIRELESS MICROPHONES (AND SIMILAR DEVICES)
IN 700 MHz BAND PROHIBITED AFTER JUNE 12, 2010
Under a new FCC rule, anyone who uses a wireless microphone (or similar device) that operates in the 700 MHz Band (698
to 806 MHz) must stop operating their wireless microphone (or similar device) no later than June 12, 2010.
All users of 700 MHz Band wireless microphones (and similar devices) who wish to continue to use their equipment – including users such as theaters, churches, schools, conference centers, theme parks, and musicians – will need to retune or
replace, if necessary their equipment no later than June 12, 2010. Wireless microphones (and similar devices) that operate
outside of the 700 MHz Band are not affected by the FCC’s actions and may continue to operate.
Equipment that is a “similar device” to a wireless microphone is also known as equipment for a “low power auxiliary station”.
Typically these devices can transmit over distances of 100 meters. Examples devices include wireless intercoms, wireless
in-ear monitors (“IEM”), wireless audio instrument links, and wireless cueing equipment (aka “IFB”.)
When Use Must Stop Immediately
All wireless microphone users that cause harmful interference to a 700 MHz public safety or commercial licensee must
cease operations immediately. If a consumer is informed that the device the consumer is using is causing harmful interference, the consumer must cease operations immediately.
60 Day Notice to Stop Use (Early Clearing Process)
In some instances, public safety and commercial licensees may need to initiate their services in the 700 MHz Band before
June 12, 2010. In these instances, users of 700 MHz Band wireless microphones will be required to stop using their devices
prior to June 12, 2010. This is called the “Early Clearing Process.”
There are two ways that wireless microphone (and similar device) users may become aware of an Early Clearing Process
that affects them. In both instances, wireless microphone users are required to cease operations within 60 days of the notice.
1) The FCC will issue a Public Notice identifying markets where wireless microphone operations must cease. The Public
Notices and summary information will be available on the FCC’s website www.fcc.gov/cgb/wirelessmicrophones/ or
2) Any 700 MHz Band public safety or commercial licensee may notify any entity operating low power auxiliary stations
that the licensee is going to initiate use of their spectrum.
In the event that both of these notice provisions are used, the wireless microphone user will be required to stop operations
based on the earlier of the two termination dates.
To receive information on this and other FCC consumer topics through the Commission’s electronic
subscriber service, visit www.fcc.gov/cgb/contacts/.
LECTROSONICS CONVERSION AND UPDATE PROGRAM
Contact the factory regarding the conversion of your 700 MHz Band equipment to comply with the FCC rules and orders.
Equipment can be converted to new frequencies or exchanged for current, equivalent models at heavily discounted costs
subsidized by the factory.
Call (800) 821-1121 or (505) 892-4501 in the USA • Fax (505) 892-6243 • Email: [email protected]
For additional contact information and repair services visit: http://www.lectrosonics.com/service/sands.htm
72
©Copyright 2013. Lectrosonics, Inc.
LECTROSONICS, INC.
Made in the USA by a Bunch of Fanatics
Lectrosonics USA
& Latin America:
581 Laser Road NE
Rio Rancho NM 87124 USA
(505) 892-4501
(800) 821-1121 toll-free
(505) 892-6243 fax
www.lectrosonics.com
Lectrosonics Canada:
49 Spadina Avenue
Suite 303A
Toronto, Ontario M5V 2J1
(416) 596-2202
(877) 753-2876 toll-free
(416) 596-6648 fax
Lectrosonics Europe,
Middle East &
South Africa:
The Bakery
Jim Bakker
+33 (0) 78558 3735
Lectrosonics Asia
& Australia:
More Technologies
Peter More
Los Angeles, CA
(310) 470-8998
(310) 470-0262 fax
Made in the USA by a
Bunch of Fanatics
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement