null  null
CATALOG LB06
R
LIGHTBARS
SIRENS, SPEAKERS AND SWITCH CONTROLS
Officially Licensed Warning
Lights of NASCAR®
Whelen Products are
designed & manufactured
in the U.S.A.
®
Inner-Edge® Series
Upper Front
Linear-LED
Choose three, six or eight
Linear Super-LED®, or, eight or ten super
bright TIR3™ Super-LED modules in a rugged
housing that fits snugly against the upper front
windshield and upper or lower back window.
Available for late model Crown Victoria, Expedition,
Impala, Suburban, or Tahoe police vehicles.
■ Full-featured interior lightbar that is virtually
undetectable when not in operation.
■ Super-LEDs are low current, vibration and
moisture resistant for reliable long life operation.
■ 6 lamp unit available in split housing with three
lamps in each unit for either side of rear view
mirror in 2006 Chevy Impala or Dodge Charger.
■ Requires customer supplied switches or
control head, purchased separately.
■ Available in four safety colors.
■ Scan-Lock™ provides multiple flash patterns.
■ Order by choosing housing model and then
add LED lighthead colors.
■ Five-year warranty on LEDs.
■ Size: 2-3/4" (71mm) H x 7-1/8" (181mm) W
x 45-3/8" (115cm) L.
Forward & rear facing undercover lighting systems that are
virtually undetectable when not in use. Choose the housing
to fit you vehicle and the number and style of
light modules needed.
THREE Linear-LED®
Three super bright Linear-LED modules in a
smaller housing that fits snugly against the
upper front windshield of late model Ford
Crown Victoria police vehicles.
• New optional two Linear-LEDs & one center
mounted strobe and mounting hardware,
Standard, red, blue and/or amber. For white
LED modules, contact factory.
• Size: 2-3/4" (71mm) H x 7-1/8" (181mm) W x
18" (46cm) L.
2005-1/2 to 2006 Ford Crown Victoria:
I02UF***: Three single color, for vehicle with
13-1/4" between visor mounting brackets.
I02UF*8*: Two single color, and two center
mounted MR8 take downs, upper front unit,
for vehicle with 13-1/4" between visor mounting
brackets.
I02UFT8*: California steady red, one single
color Super-LED and two center mounted MR8
take-downs, for vehicle with 13-1/4" between
FORWARD FACING
visor mounting brackets.
I02UF*J*: Two single color and one split
TIR3™ Super-LED®
red/blue Linear Super-LEDs, for vehicle with
• Two MR8 halogen take-down lights.
13-1/2" between visor mounting brackets.
• Easy installation to visor by anchor points, no holes.
I02UF*S*: Two single color Super-LEDs and
• Meets SAE specifications.
a center mounted clear remote strobe, for
• TIR3 version features eight or ten TIR3 Super-LEDs,
vehicles with 13-1/4" between visor mounting
including two modules covering critical 45° angles.
brackets.
2005-1/2 to 2006 Crown Victoria, with 13-1/4"
between visor mounting brackets:
REAR FACING
I02UF8: Eight lamp unit.
■ TIR3 models meet SAE specifications.
I02UFZ: Ten lamp unit.
■ Linear-LEDs meet California Title 13.
2005 Chevy Suburban and Tahoe:
I04UF8: Eight lamp unit.
Upper TIR3 Super-LED Models
I04UFZ: Ten lamp unit.
• Choose from four configurations with eight or
2005 Ford Expedition:
ten TIR3 Super-LEDs:
105UF8: Eight lamp unit.
• Eight or ten lamp warning light or Traffic
Advisor™, field programmable.
105UFZ: Ten lamp unit.
•
Eight
lamp unit available with a six lamp Traffic
Linear-LED®
Advisor with a single flasher on either end.
• Meets SAE & California Title XIII specifications.
• Ten lamp unit available with an eight lamp
Traffic Advisor with a single flasher on either
• California steady-burn mode factory preset or
end.
customer configured in the field.
• Ten lamp unit is available with a six lamp
• Seven Super-LEDs produce a wider light pattern.
Traffic Advisor with two flashers on either end.
• Center mounted Linear-LED available in split colors.
2005-1/2 to 2006 Ford Crown Victoria, with 13-1/4"
between visor mounting brackets:
I02UF7L: Seven lamp unit.
2005 Chevy Suburban & Tahoe:
I04UF7L: Seven lamp unit.
2005 Expedition:
I05UF7L: Seven lamp unit.
Upper Rear Linear-LED
Inner-Edge Three Linear mounted in the upper front
windshield of late model Ford Crown Victoria.
2005-1/2 to 2006 Ford Crown Victoria:
I02UR8: Eight LED unit, programmable for
warning or 8 Lamp Traffic Advisor.
I02UR86: Six LED Traffic Advisor with two
end flashers.
I02URZ: Ten LED unit, programmable for
warning or 10 lamp Traffic Advisor.
I02URZ6: Six LED Traffic Advisor with four
end flashers.
I02URZ8: Eight LED Traffic Advisor with two
end flashers.
Upper Linear-LED® Models
• Eight programmable modules for warning
light or Traffic Advisor operation.
• Six lamp Traffic Advisor with a single flashing
light on either end.
2005-1/2 to 2006 Ford Crown Victoria:
I02UR8L: Eight Linear-LED unit, programmable
for warning or 8 lamp Traffic Advisor.
I02UR8LT: Six Linear-LED Traffic Advisor with
two end flashers.
Lower Linear-LED® Models
• Six or eight Linear-LED lower units with
mounting kit.
2005-1/2 to 2006 Ford Crown Victoria:
I02LR6L: Six Linear-LED unit, programmable
for warning or 6 lamp Traffic Advisor.
I02LR8L: Eight Linear-LED unit, programmable
for warning or 8 lamp Traffic Advisor.
I02LR8LT: Six Linear-LED Traffic Advisor with
two end flashers.
2006 Dodge Charger:
I07LR6L: Six Linear-LED unit, programmable
for warning or 6 lamp Traffic Advisor.
I07LR8L: Eight Linear-LED unit, programmable
for warning or 8 lamp Traffic Advisor.
I07LR8LT: Six Linear-LED Traffic Advisor with
two end flashers.
Other model vehicles may be added, contact
your local Whelen representative for details.
Upper Front Two
Linear-LED and
Center Strobe
Upper Front TIR3
Upper Front
Three Linear-LED
2
“LIGHTBAR WIZARD” PROGRAM is available
on disk or at our website: www.whelen.com
®
LFL Liberty™ Super-LED® SX Series Lightbars
Maximum heads-up warning
in an extreme low profile
lightbar. New SX models
have improved by adding
“brighter” extended corner
modules and MR11 alley lights!
®
LEDs are colorless until lightbar is turned on.
LFL Liberty features the next generation, all
Linear-LED® technology in a warning package
that rivals strobe in impact. New standard
Model SX Series now features the “XL”
extended LED corner module and MR11 alley
light, shipping now. All LFL Liberty models
provide heavy-duty, long life operation with
low, low current draw.
Distributors will appreciate the convenience
of stocking basic assemblies with factory
installed front and rear LED wiring harnesses.
■ Easily upgradeable. Choose the standard
four “XL” extended corner Linear SuperLED modules, then later add up to 12
Linear Super-LED modules, for a total of
16 Super-LED modules.
■ Build your lightbar in any color combination with take-downs and LED modules
in any position you want.
■ Buy a base bar and add pairs of Linear-LED
modules at any time in the future at the
distributor or end user level.
■ Sleek, aerodynamic profile with state-ofthe-art optics.
■ Optional halogen take-down & alley lights.
■ Optional five or six LED Traffic Advisor
with ultra high intensity TIR6™ or Linear
Super-LED modules.
■ Three standard lengths: 43”, 48” and 54”.
■ High/Low power control and cruise light
mode of corner modules with two
intensity modes, standard.
■ Clear outer lenses are standard, optional
color lenses are available.
■ All internal lightheads are driven by an all
electronic I/O board that provides proper
input power. You are assured of equal light
intensity from each lighthead through a
voltage range of 10-16 VDC.
■ Scan-Lock™ allows you to scan through
ten flash patterns and lock in the desired
pattern. Every pair of lights can have its
own unique pattern.
■ All models exceed SAE requirements.
■ Extruded aluminum chassis provides
superb strength and stability.
■ All Super-LED modules feature wide-angle
design for increased performance.
■ Low “LC” Current operation uses a small
diameter external cable harness for
operation with standard, low current
switch controls or micro switches.
■ Pre-wired with 15’ passenger side cable
exit. Optional driver side cable exit.
■ Customer installed upgrade kits to convert
SL version to SX are available.
■ 5 year Heavy-Duty Professional warranty
on LEDs.
■ Size: 2-1/2” (64mm) H x 12” (304mm)
W x 43-1/8” (109cm) or 48-1/2”
(123cm) or 53-7/8” (137cm) L.
I/O
Board
ELECTRONIC
MODULE
LEGEND
ELECTRONIC
MODULE
Linear
LED
Module
I/O
Board
I/O
Board
Liberty SX Series
LFL Liberty™ SX Series with low current
switching and 10 Scan-Lock™ flash patterns
standard, with passenger side exiting 15' cable
and 1 LED power supply, 4 of the “XL” extended
LED corner modules matched with a MR11 alley
light option.
SX4****: 43-1/8” lightbar
SX8****: 48-1/2” lightbar
SX2****: 54" lightbar
OPTIONS
• Linear Super-LED direction inboard warning
lights.
• Four LED cruise lights.
• Five or six Super-LED Traffic Advisor (full
size or split) includes control head, or with
two wire control (no control head).
• Driver side cable exit, includes 25' power/
ground cable.
• Crisscross flash pattern of end Linear-LEDs.
• Two MR11 flashing alley lights for SX series
only, do not use with older SL series lightbars.
UPGRADE SL SERIES TO SX SERIES WITH
CUSTOMER INSTALLED KITS
SXAM1KT is required if lightbar has alley lights.
SXKT****: Upgrade kit to convert SL into a
SX series lightbar, includes 4 extended corner
light modules.
SXAM1KT: MR11 alley lights kit, for use with
SXKT kit only, includes two MR11 alley lights.
SX MR11 Alley Light
* Replace asterisk in model number with color of LED
lightheads required.
A = Amber, B = Blue, C = White, R = Red
Take-down
Liberty SX extended corner module
provides added coverage to critical 90°
angles and includes an MR11 alley light.
“LIGHTBAR WIZARD” PROGRAM is available
on disk or at our website: www.whelen.com
3
®
Edge® Ultra Freedom FL/FX Super-LED® Lightbars
Start with four Linear-LED
modules and add up to
twelve more Linear-LED
modules, or different options,
for a total of sixteen lights
in the combination you need.
®
Ultra Freedom features the next generation,
all Linear-LED® technology in a warning
package that rivals strobe in impact, but
provides heavy-duty, long life operation with
low, low current draw. Now available in two
styles, the FL version with four standard
corner Super-LED® modules, and the FX
version with the “XL” extended LED corner
modules and MR11 alley light.
Easily upgradeable. For example, buy a four
LED version today; add up to twelve more
LED modules at a later date. Distributors will
appreciate the convenience of stocking basic
assemblies with factory installed front and
rear LED wiring harnesses.
All Ultra lightbars are made for rough treatment and long hours. From the extruded
aluminum chassis on up, every component
is designed and field-tested for performance
under just those conditions.
■ Choose from the standard four corner
Linear Super-LED model or new “XL”
extended corner module, then add up to
12 Linear Super-LED directional modules,
for a total of 16 Linear-LED modules.
■ Build your bar in any color combination
with take-downs and LED modules in
any position you want.
■ Utilizing duplex Linear Super-LED modules,
top level may be different color than
bottom level with individual control of
upper and lower levels.
■ Aerodynamic profile, with the state-ofthe-art wide-angle design optics.
■ High/Low power control and cruise light
mode of corner modules with two intensity
modes, standard.
■ Take-down and alley lights are available in
400 Series halogen or MR16 style. MR16
alley lights allow the use of a TIR3™ SuperLED® module in the alley position also.
■ Clear outer lenses are standard, optional
color lenses available.
■ Optional halogen flashing take-downs, alley
lights and five or six Linear Super-LED
Traffic Advisor™.
FL Series
1 power supply, 4 corner Linear-LEDs
FL4****: 44-3/8” lightbar
FL8****: 49-3/4” lightbar
FL2****: 55” lightbar
■ Two types of Traffic Advisors to choose
from: 1) the standard model with a full
feature control head that allows for multiple patterns and LED status display, or
2) a two-wire model that operates off of
any two switches and does not require a
special control head to operate.
■ All internal lightheads whether LED or
halogen, are driven by a single all
electronic I/O board that provides
proper input power. You are assured of
equal light intensity from each lighthead
through a voltage range of 10–16 VDC.
■ Scan-Lock™ allows you to scan through
ten flash patterns and lock in the
desired pattern. Every pair of lights
can have its own unique pattern.
■ All models meet or exceed SAE Class 1
and California Title XIII requirements.
■ Extruded aluminum I-beam chassis
provides superb strength and stability.
■ Slightly wider footprint provides greater
stability and weight distribution.
■ Low “LC” Current operation uses a small
diameter external cable harness for
operation with standard, low current
switch controls or micro switches.
■ Pre-wired with 15’ passenger side cable
exit, optional driver side cable exit.
■ Standard lengths: 44, 50, 55”.
■ Custom lengths: 60, 66, 72, 77, 82, 88,
93 & 98”.
■ Available NFPA lightbars meet NFPA 1901
Lighting Standards with standard lengths
of 55”, 60” and 72”.
■ 5 year Heavy-Duty Professional warranty
on LEDs.
■ Size: 3-3/4” (95mm) H x 12” (304mm) W
x 44-3/8” (113cm) or 49-3/4” (126cm) or
55-1/8” (140cm) or 60” (152cm) or 72”
(183cm) L.
I/O
Board
LEGEND
FL Series Front Facing
ELECTRONIC
MODULE
Linear
LED Module
1 power supply, 4 front Linear-LEDs
FL4****F: 44-3/8” lightbar
FL8****F: 49-3/4” lightbar
FL2****F: 55” lightbar
I/O
Board
LEGEND
FX Series Option
ELECTRONIC
MODULE
Linear
LED Corner
Module
I/O
Board
Linear
LED Module
Ultra Freedom FX Series, same as FL but with the
“XL” extended LED corner modules and MR11
alley light option.
FX4****: 44-3/8” lightbar
FX8****: 49-3/4” lightbar
FX2****: 55” lightbar
* Replace asterisk in model number with color of LED
lightheads required.
A = Amber, B = Blue, C = White, R = Red
OPTIONS
• One or two color inboard directional
Super-LEDs.
• MR16 halogen flashing take-down lights.
• MR16 halogen flashing alley lights or MR11
flashing alley lights with two TIR3 SuperLED in amber, red and/or blue.
• Two MR11 flashing alley lights for FX only.
• Four LED cruise lights.
• Five or six 400 Series LED or Linear SuperLED Traffic Advisor, includes control head,
or with two wire control; no control head.
• Driver side cable exit, includes 25' power
and ground cable.
• 49” or 55” lightbar pre-wired for 3M®
Model 9592 Opticom®.
• 3M Emitter.
FX Alley Light
FL Alley Light
Freedom FL with
400 Series Halogen
42
I/O
Board
Freedom FX
extended corner
light module option
provides added coverage to
critical 90° angles, shown with
optional MR11 alley light.
®
LFL Patriot™ Strobe Lightbars
LFL Patriot starts with
low profile, high-impact
strobe warning, and
lets you add LED and
halogen components to
fit your exact requirements.
High performance and reliability in our
extremely low profile (2-1/2" high) lightbar,
with all the pizzazz of a conventional height
lightbar. The LFL Patriot Series combines the
latest strobe, LED and halogen technology
into a compact design. Start with high-impact
4, 6, or 8 strobes, then add up to 12 LED
modules and up to 4 halogen modules.
All LFL Patriot lightbars have a slightly wider
footprint that provides greater stability and
weight distribution on the thinner roof
construction of today's vehicles.
■ Sleek, aerodynamic profile and high impact
wide angle optics.
■ Optional halogen take-downs, alley lights
and LED or TIR6™ Super-LED® flashers (up
to 6 front & 6 rear).
■ Optional LED or TIR6 Super-Led Traffic
Advisor™ with two-wire control, does
not require a special control head for
operation.
■ Optional “Personality” module provides
enhanced control and added flexibility to
the operation of all lamps.
■ Strobe power supplies have ten externally
selectable flash patterns using Scan-Lock™
momentary selection switching.
■ Low “LC” Current operation uses a small
diameter external cable harness for
operation with standard, low current
switch controls or micro switches.
■ Three standard lengths: 44”, 48” & 54”.
■ Pre-wired 15’ passenger side cable exit.
Optional driver side cable exit available.
■ Extruded aluminum chassis provides
superb strength and stability.
■ All models exceed SAE requirements.
■ 5 year warranty on power supply, 2 year
warranty on strobe tubes, 5 year warranty
on LEDs.
■ Size: 2-1/2” (64mm) H x 12” (304mm) W
x 43-1/8” (109cm) or 48-1/2” (123cm) or
53-7/8” (137cm) L.
POWER SUPPLY
OPTIONS
LL14 Series
POWER SUPPLY
LL14-F Series
POWER SUPPLY
POWER SUPPLY
LL26 Series
POWER SUPPLY
POWER SUPPLY
LL28 Series
LEGEND
POWER SUPPLY
Linear
Strobe
Power
Supply
LL14 Series
1 power supply, 4 strobes (2 front / 2 Rear)
LL144000: 43-1/8” lightbar
LL148000: 48-1/2” lightbar
LL142000: 53-7/8” lightbar
LL14-F Series
1 power supply, 4 front facing strobes
LL14400F: 43-1/8” lightbar
LL14800F: 48-1/2” lightbar
LL14200F: 53-7/8” lightbar
LL26 Series
Certain options available as customer installed
kits:
• Driver side cable exit, includes 25' power/
ground cable.
• One or two halogen alley or take-down lights,
also available in kits.
• Standard take-downs and alleys in 500 Series
halogen or MR11.
• MR11 alley light option with TIR3™ warning.
• Flashing take-down and alley light upgrade.
• LED cruise light kit includes four LED cruise
lights and brackets.
• Two LED or TIR6 Super-LED lights, front
or rear facing, also available in kits.
• Five or six Super-LED or 5mm Traffic Advisor,
two wire control, no control head, also
available in kits.
• Edge lightbar pre-wired to Whelen switch
control.
• Optional lens section, glued.
• End strobe filter.
• Two or four strobe light upgrade kit, includes
500 Series strobes & 1-LFL412 power supply.
• 500 Series non-optic lens.
• Special configuration, other than standard.
2 power supplies, 6 strobes (4 front / 2 Rear)
LL264000: 43-1/8” lightbar
LL268000: 48-1/2” lightbar
LL262000: 53-7/8” lightbar
LL28 Series
2 power supplies, 8 strobes (4 front / 4 Rear)
LL284000: 43-1/8” lightbar
LL288000: 48-1/2” lightbar
LL282000: 53-7/8” lightbar
Cruise Lights & Alley Light
LED Flasher
Actual
Height
of
LFL
Patriot
and
Liberty
Bars
“LIGHTBAR WIZARD” PROGRAM is available
on disk or at our website: www.whelen.com
5
®
Edge Ultra Strobe Lightbars
®
Classic Edge styling with a slightly
wider stance and modular construction
with a wide selection of light sources
and configurations give you a custom
lightbar with "off-the-shelf" convenience
yet easily upgradeable later.
Ultra starts with modular architecture "snapin/lock-in" components, and an internal
wiring harness that lets you select strobe,
LED & halogen warning configurations.
Easily upgradeable; you can buy a fourstrobe version today; add up to eight more
strobe modules or other options at a later
date. Now you can easily build the exact
lightbar you've been looking for.
Distributors will appreciate the convenience
of stocking basic assemblies with factory
installed wiring harnesses. All Edge Ultra
lightbars have a slightly wider footprint,
which provides greater stability, and weight
distribution.
■ Design your own lightbar with your
choice of strobe, halogen and LED
modules or build in a halogen or LED
Traffic Advisor™.
■ Ultra LC is available in four, six, eight,
ten or twelve strobe models.
■ External cable is small in diameter for
easier installation.
■ Internal electronics allow for 22 gauge
external wiring for all switching functions.
■ Low “LC” Current operation uses a small
diameter external cable harness for easier
installation and operation with standard,
low current switch controls or micro
switches.
■ Secondary warning lamp modules
available are all strobe, all halogen, all
LED; combination: strobe over halogen,
strobe over LED, halogen over halogen,
LED over LED, and LED brake/tail/turn.
■ All inboard lamp modules and lenses
are the same size and can be placed
anywhere in the lightbar.
■ End caps with clear lenses are available
with color inner filters for individual
front and rear color selection.
Filters are also available for color
combinations on duplex light modules.
■ Strobe power supplies provide ten
Scan-Lock™ flash patterns using a
momentary selection switch.
■ Optional "Personality" module provides
enhanced control & added flexibility to
the operation of all lamps such as flashing
take-downs and alleys. Contact your
Whelen Representative for details.
■ Three standard lengths: 44, 50 & 55”.
■ Pre-wired with 15’ passenger side exit
cable. Optional driver side cable exit.
■ Strobe power supplies are located on
the ends of the lightbar for ease of
access and provide 25% more power
to each strobe tube.
■ Custom lengths available: 60, 66, 72,
77, 82, 88, 93 & 98”.
■ All Ultra lightbars meet Class I SAE
and California Title XIII requirements.
■ 5 year Heavy-Duty Professional warranty
on power supply and LEDs, 2 year
warranty on strobe tubes.
■ Size: 3-3/4” (95mm) H x 12” (304mm)
W x 44-3/8” (113cm) or 49-3/4”
(126cm) or 55-1/8” (140cm) L.
POWER SUPPLY
9U24 Series
POWER SUPPLY
9U24-F Series
POWER SUPPLY
POWER SUPPLY
9U36 Series
POWER SUPPLY
POWER SUPPLY
9U38 Series
POWER SUPPLY
POWER SUPPLY
9U40 Series
POWER SUPPLY
POWER SUPPLY
POWER SUPPLY
POWER SUPPLY
LEGEND
9U42 Series
POWER SUPPLY
Linear
Strobe
400 Series
Strobe
Power
Supply
9U24 Series
1 power supply, 4 strobes (2 Front/2 Rear)
9U244000: 44-3/8” lightbar
9U248000: 49-3/4” lightbar
9U242000: 55” lightbar
9U24-F Series
1 power supply, 4 front facing strobes
9U24400F: 44-3/8” lightbar
9U24800F: 49-3/4” lightbar
9U24200F: 55” lightbar
9U36 Series
2 power supplies, 6 strobes (4 Front/2 Rear)
9U364000: 44-3/8” lightbar
9U368000: 49-3/4” lightbar
9U362000: 55” lightbar
4
6
9U38 Series - 2 power supplies,
8 strobes (4 Front/4 Rear)
9U384000: 44-3/8” lightbar
9U388000: 49-3/4” lightbar
9U382000: 55” lightbar
9U40 Series - 3 power supplies,
10 strobes (4 Front/4 Rear/2 End)
9U404000: 44-3/8” lightbar
9U408000: 49-3/4” lightbar
9U402000: 55” lightbar
9U42 Series - 3 power supplies,
12 strobes (6 Front/4 Rear/2 End)
9U424000: 44-3/8” lightbar
9U428000: 49-3/4” lightbar
9U422000: 55” lightbar
OPTIONS
Certain options available as customer
installed kits:
• Driver side cable exit, with 25' power/ground
cable.
• Two single or duplex halogen alley lights.
• One or two halogen, single or duplex takedown lights.
• Flashing take-down & flashing alley light
enable module, requires purchase of takedown and/or alley lights.
• Piercer II™, dual strobe, nose piece with
built-in power supply.
• PierceAlert™, twin oscillating lamp assemblies,
clear or color housing with clear or color
windows.
• One halogen California steady red or blue
identification light.
• Two single or duplex LED flashing lights,
front or rear facing, also available as a kit.
• Two single or duplex halogen flashing
lights, front or rear facing.
• LED cruise lights.
• 50” or 55" Edge Ultra lightbar pre-wired
for 3M® Model 9592 Opticom®.
• 3M Emitter for Edge Ultra lightbars.
• Printed sign for Edge lightbar.
• LED backlighted sign for Edge lightbar, amber.
• Edge lightbar pre-wired to Whelen switch control.
• Built-in five or six halogen or LED panel (or
duplex size) Traffic Advisor, programmable
flash patterns standard, (not available in all
models), also available as a kit.
• Half color filter for strobe or halogen duplex
modules.
• Corner color filter for use with clear end cap.
• Optional lens section, glued.
• Built-in Smart Arrow Messenger® Series.
• Custom lengths: 60, 66, 72, 77, 82,
88, 93 & 98”.
• Two strobe light upgrade kit.
®
Edge® 9M Lightbars
Built on the classic Edge 9000
extruded aluminum I-Beam
chassis, this series is a
highly effective, user friendly
and cost efficient addition
to the Edge family.
■ Classic Edge proportions with straightforward, modular construction and
“snap-in/lock-in” components for ease
of changes, upgrades or service.
■ Models include 4, 6, 8, 10, or 12 strobe
lightheads plus up to ten secondary
warning, halogen or LED modules.
■ Optional, built-in Traffic Advisor™ in strobe,
LED or halogen versions.
■ Lamp modules and slide-in lenses are
of equal size and can be placed anywhere
in the lightbar.
■ End caps with clear lenses and color inner
filters allow individual color selection of
front and rear strobes.
■ Color filters are also available for duplex
light modules.
■ Optional Scan-Lock™ flash pattern control
(using an external connection) that lets you
toggle through ten strobe, six halogen or
sixteen LED flash patterns, and lock in the
pattern you select. Selected pattern is
stored in non-volatile memory until you
decide to change.
■ Scan-Lock allows each power supply and
each flasher board to be programmed in
a different flash pattern.
■ Select up to 3 power supplies (12 strobes
max.) and 2 flasher boards per lightbar
(8 halogen flashers).
■ Each flasher runs up to 4 lightheads and
includes steady-burn override for one
pair of lights to be used for flashing
take-downs, etc.
■ All non-duplex options are available in kit
form, field-upgradeable by distributor,
installer or user.
■ Passenger side, 15’ external cable harness,
standard on 9M Low “LC” Current lightbars, includes two (8 gauge) power cables
to the battery, and sixteen low power (22
gauge) function wires for connection to
the customer supplied switch control.
These low power function wires need less
than 1/2 amp to operate, allow for simple
operational independence of each lightbar
control function, and make wiring a snap!
■ Optional driver side cable exit with 25’
power cable.
■ Three standard lengths: 44”, 50” & 55”.
■ Custom lengths are 60”, 66”, 72”, 77”,
82”, 88”, 93” & 98”.
■ Permanent mount available with a variety
of gutter mounting options.
■ All models meet or exceed SAE Class 1
and California Title XIII requirements.
■ 2 year warranty on power supply and
strobe tubes.
■ 5 year warranty on LEDs.
■ Size: 3-3/4” (95mm) H x 10” (254mm)
W x 44-3/8” (112cm) or 49-3/4”
(126cm) or 55-1/8” (140cm) L.
9M14 Series
POWER SUPPLY
9M14-F Series
POWER SUPPLY
POWER SUPPLY
POWER SUPPLY
9M26 Series
POWER SUPPLY
POWER SUPPLY
9M28 Series
POWER SUPPLY
POWER SUPPLY
POWER SUPPLY
POWER SUPPLY
POWER SUPPLY
POWER SUPPLY
LEGEND
9M30 Series
9M32 Series
POWER SUPPLY
Linear
Strobe
4E Series
Strobe
Power
Supply
9M14 Series
1 power supply, 4 corner strobes
9M144000: 44-3/8” lightbar
9M148000: 49-3/4” lightbar
9M142000: 55” lightbar
9M14-F Series
1 power supply, 4 front facing strobes
9M14400F: 44-3/8” lightbar
9M14800F: 49-3/4” lightbar
9M14200F: 55” lightbar
9M26 Series
2 power supplies, 6 strobes
9M264000: 44-3/8” lightbar
9M268000: 49-3/4” lightbar
9M262000: 55” lightbar
9M28 Series
2 power supplies, 8 strobes
9M284000: 44-3/8” lightbar
9M288000: 49-3/4” lightbar
9M282000: 55” lightbar
OPTIONS
Certain options available as customer
installed kits:
• 15' five conductor cable, allowing for external
individual Scan-Lock™ flash patterns of each
power supply and flasher module.
• Driver side cable exit, includes 25’
power/ground cable.
• Lo-Pro™ speaker and speaker kit for customer
supplied drive.
• Two single; duplex halogen alley or take-down
lights (Halogen wired through auxiliary inputs).
• Two or four single or duplex halogen lights
or LED panels, includes flasher with steadyburn priority mode.
• Piercer II™ dual strobe nose piece with built-in
power supply.
• PierceAlert™, twin oscillating lamp, with clear
or color housing, and clear or color lens.
• Two single or duplex LED brake/tail/turn
panels, includes wiring harness.
• LED cruise lights.
• Printed or lighted sign.
• 44", 49” or 55” lightbar pre-wired for 3M®
Model 9592 Opticom™.
• 3M Emitter for Edge® 9M lightbars.
• Built-in 5 or 6 halogen or LED single or
duplex lamp Traffic Advisor with control head.
• Built-in 6 single or duplex strobe light Traffic
Advisor two wire control, with power supply.
• Half color filters for use with strobe or
halogen duplex modules.
• Two or four strobe light upgrade kit (two/four
400 Series strobes & one power supply).
• Corner color filter for use with clear end cap.
• Lens section glued.
• Custom lengths: 60", 66", 72", 77", 82", 83”,
93” or 98”.
• Built-in Smart Arrow Messenger™ Series.
9M30 Series
3 power supplies, 10 strobes
9M304000: 44-3/8” lightbar
9M308000: 49-3/4” lightbar
9M302000: 55” lightbar
9M32 Series
3 power supplies, 12 strobes
9M324000: 44-3/8” lightbar
9M328000: 49-3/4” lightbar
9M322000: 55” lightbar
LED Flasher
PierceAlert™ Twin
Rotators
Halogen
Take-Down
7
®
Delta™ Independence™ Lightbar
A sleek multi-level
lightbar with halogen
primary warning;
and secondary
strobe, halogen, LED
& Super-LED ®
auxiliary warning
Delta Independence offers sleek multi-level
warning featuring halogen rotating lights for
primary warning, with strobe, halogen, LED
and Super-LED® auxiliary warning. With two
to six rotating halogen modules plus diamond
mirrors, Delta Independence displays plenty
of flash activity while still allowing options
like halogen oscillators, take-downs and
alley lights with a built-in lower level TIR6™
Super-LED® Traffic Advisor™. Rotating halogen
modules feature precision double ball bearing
design for a quiet long life and superior
performance, and require only standard,
off-the-shelf bulbs for replacement. The
shatter-resistant dome is secured to the
base with just four screws on a polycarbonate
platform for easy access to internal components without removing the lightbar from the
vehicle. The extruded aluminum base will not
sag or warp and rugged, six-point fiberglassfilled nylon mounting feet provide a stable
stance. Delta Independence lightbars are easy
to install, easy to maintain and easy to operate
with knockout warning capability.
DELTA Series
STANDARD FEATURES
Built-in; not all options available in all models.
■ Class 1, SAE Certified, all models.
■ Two to six rotating halogen modules plus
diamond mirrors.
■ Multi-level styling for 360° of uninterrupted
warning.
■ Dome available in all five safety colors or
individual colored filters on each rotator
with clear dome.
■ 12 VDC, with 15’ cable length, standard.
■ 3 year motor assembly warranty.
■ 5 year warranty on LEDs.
■ Size: 5-1/2” (140mm) H x 16-3/4”
(425mm) D x 44-5/16”(113cm), 49-3/4”
(126cm), 56-5/16” (143cm), 61-13/16”
(157cm), or 72-11/16” (185cm) L.
OPTIONAL FEATURES
■ Two front and/or rear halogen oscillators.
■ Up to four halogen take-down (work lights)
and alley lights, available in 500 Series
halogen or MR11 style.
■ MR11 take-downs (work lights) and alley
lights, single or dual with or without
TIR3™ Super-LED warning.
■ Up to eight LED flashers, front and/or rear;
California red and blue steady lamps.
■ Two or four linear strobes for either upper
or lower level.
■ Half cylinder filters available for split
rotator color requirements.
■ Built-in lower level halogen, LED or TIR6
Super-LED Traffic Advisor.
Includes two rotators and diamond mirrors
DI2S400 44-5/16”, 135 RPM rotators
DI2S800 49-3/4”, 135 RPM rotators
DI2S200 56-5/16”, 135 RPM rotators
DI2S000 61-13/16”, 135 RPM rotators
DI2S700 72-11/16”, 135 RPM rotators
DI2H400 44-5/16”, 175 RPM high speed rotators
DI2H800 49-3/4”, 175 RPM high speed rotators
DI2H200 56-5/16”, 175 RPM high speed rotators
DI2H000 61-13/16”, 175 RPM high speed rotators
DI2H700 72-11/16”, 175 RPM high speed rotators
DELTA Series Dome Sets
DD4*** for 44-5/16” lightbar, three colors
DD8*** for 49-3/4” lightbar, three colors
DD2***** for 56-5/16” lightbar, five colors
DD0***** for 61-13/16” lightbar, five colors
DD7***** for 72-11/16” lightbar, five colors
* Replace symbol in model number with letter indicating
dome color:
A=Amber, B=Blue, C=Clear, R=Red, G=Green
UPPER LEVEL OPTIONS
• One center rotator, standard or high speed
for single center section, or with two flat
mirrors for dual center section.
• One 400 Series halogen flasher, strobe or
Linear Super-LED flasher for single center
section.
• Two 400 Series halogen flashers, strobes or
Linear Super-LED flashers for outboard or
double center section.
• Delta lightbar pre-wired for 3M® model 792H
Opticom® (includes cable and bracket).
• Color filter for rotator, installed.
• 180° color half-cylinder filter for rotator.
LOWER LEVEL OPTIONS
• One 500 Series halogen take-down light, for
single center section, or two for outboard or
dual center section.
• Two oscillators.
• Two TIR3 Super-LED lights.
• One 500 Series halogen, LED, TIR6
Super-LED or Linear Super-LED flasher, for
single center section.
• One MR11 halogen take-down light or two
for outboard or dual center section.
• Two MR11 halogen alley lights, also available
for outboard section with two TIR3 SuperLEDs.
• One or two California steady halogen lights.
• Flashing take-down and alley light upgrade.
• One or two 500 Series halogen, 5mm LED
or TIR6 Super-LED flashers, for outboard
or dual center section.
• Two 500 Series strobes.
• Traffic Advisor, from five to seven halogen
lamps, 5mm LED or TIR6 Super-LED
panels.
• For mounting kits, see optional mounting
kits section in current price list.
Alley Light
Oscillator
MR11 with TIR3 Alley Light
6
8
6
®
Centurion™ Lightbars
Larger profile, bi-level lightbar with
halogen rotators or strobe beacon in
upper level. Lower level accommodates
take-downs, flashers, alley lights,
brake lights and Traffic Advisor™.
Centurion C4008RBTA Built-in Traffic Advisor Option
C2008000, C2002000, C2000000, C2007000
A bigger, bolder, brighter rotating halogen
lightbar ideally suited for Police, Fire and
EMS vehicles. Rugged Centurion lightbars
are sized to hold a wide range of factory or
customer installed options including a 123
dB speaker, corner strobes, halogen flashers
and more. It's easy to install, easy to
maintain, and features "shock mount" rotator
plate design to isolate motor and gear noise
for surprisingly quiet performance. Build the
Centurion that meets all your requirements…
now and down the road!
■ Two speed motors: 135 RPM outboard;
135 or 175 RPM inboard with double ball
bearing motor assembly design, has less
friction, less noise and maintains accurate
flash rates in a wide temperature range.
■ Parabolic reflector assembly with 50 watt
snap-in halogen lamps increases optic
light spread for increased light output.
■ Captive tongue and groove design secures
dome to base for moisture resistance.
■ Extruded aluminum base never warps
or sags, with optimum shock protection.
■ Mounting foot kit provides wide footprint
for greater stability.
■ Parts change easily with just a screwdriver.
■ Sizes are 48", 52", 60" and 72".
■ Models include solid color domes with
clear lower level lens & clear lens dividers.
■ Pre-wired with 15’ driver side exit. Optional
passenger cable exit available.
■ Meets or exceeds SAE and California Title
XIII requirements.
■ A wide range of options; can be factory
installed or added later by the customer.
■ 3 year warranty on motor assembly.
■ 2 year warranty on Linear strobe.
■ 5 year warranty on LEDs.
■ Size: 6-3/8” (161mm) H x 12” (304mm) W
x 48” (122cm), 52” (132cm), 60” (152cm)
or 72” (183cm) L.
COMBINATION LIGHTBARS
Strobe, rotating, flashing halogen or LED
combination lightbars available. Contact
factory for information.
C4008000, C4002000
C4000000, C4007000
C00280**, C00220**, C00200**, C00270**
LEGEND
Halogen Diamond “V”
360°
Rotator Mirror Mirror Strobe
CENTURION SERIES
360° STROBE LIGHTBARS
Includes two 22 watt, 360° Strobe Beacons
with 30° “V” Mirrors.
C00280**: 48”
C00220**: 52”
C00200**: 60”
C00270**: 72”
* Last two digits indicate color of internal strobe lens.
Replace asterisk in model number with lens color desired.
A = Amber, B = Blue, C= Clear, G = Green, R = Red
CENTURION SERIES
ROTATING LIGHTBARS
Model numbers ending in “E” indicate model without
options available.
C2008000/C200800E: two rotators, two
“V” mirrors, 48”
C2002000/C200200E: two rotators, two
“V” mirrors, 52”
C2000000/C200000E: two rotators, two
“V” mirrors, 60”
C2007000/C200700E: two rotators, two
“V” mirrors, 72”
C4008000/C400800E: four rotators, three
diamond mirrors, 48”
C4002000/C400200E: four rotators, three
diamond mirrors, 52”
C4000000/C400000E: four rotators, two
diamond mirrors, two “V” mirrors, 60”
C4007000/C400700E: four rotators, two
diamond mirrors, two “V” mirrors, 72”
OPTIONS
Certain options available as customer
installed kits. Not all options available in
all models.
• One high speed center rotator, 175 RPM,
with two “V” mirrors.
• Two high speed inboard rotators,
175 RPM, with four “V” mirrors.
• One center rotator w/ two “V” mirrors.
• One or two 22 watt 360° inboard strobe
beacons, 30° “V” mirrors.
• One or two twin duplex alley or
take-down lights.
• One twin duplex California steady
identification light, red filter driver side
or blue filter, passenger side.
• Two twin duplex front or rear flashers,
includes filter color of choice.
• Substitute an electro-mechanical flasher
for solid-state flasher (for one pair only).
• Two lower level outboard/Intersector 14
Series strobes, front facing, includes 20
watt power supply, clear only.
• Two lower level outboard 17 Series
strobes, front or rear facing, with 20 watt
power supply.
• Two lower level outboard 17 Series LED
panels, front or rear facing, includes flasher.
• Two upper 6" x 4" strobes, front or rear
facing, includes center mounted power
supply, optional color filters available for
use with clear outer domes.
• Four upper 6" x 4" strobes, 2 front/2 rear,
includes center mounted power supply,
optional color filters available for use
with clear outer domes.
• Two 6" x 4" rear halogen work lights (60”
bar minimum, center mounted).
• Two built-in duplex LED brake/tail/turn,
red filter.
• Two built-in cruise lights.
• 180° color half-cylinder filter kit for rotator.
• Color filter for rotator, installed.
Twin Duplex Alley Light
17 Series Strobe
9
®
Mini Lightbars
9M shown
with optional
take-downs
9M MINI EDGE®
■ Available in four or six strobe models in a
compact 28-1/2”size.
■ Permanent or magnetic mount.
■ 2 year power supply & strobe tube warranty.
■ Size: 3-3/4” (95mm) H x 10” (254mm) W x
28-1/2” (72cm) L.
9MMEDGEP: 4 strobes, (2 front/2 rear),
permanent mount
9MMEDGEM: 4 strobes, (2 front/2 rear),
magnetic mount
9MMEDFFD: 4 strobes, (4 front), perm. mount
9MMEDG6P: 6 strobes, (4 front/2 rear),
permanent mount
9MMEDG6M: 6 strobes, (4 front/2 rear),
magnetic mount
GUARDIAN™ MINI
ULTRA FREEDOM MINI EDGE®
■ Four corner Linear Super-LED® modules that
rivals strobe in intensity with only 70% of
strobe current draw.
■ Clear outer lenses, (optional color available).
■ Easy access to internal components; parts
change easily using only a screwdriver.
■ 5 year warranty on LEDs.
■ Size: 3-3/4” (95mm) H x
12” (304mm) W x
28-1/4” (717mm) L.
FT8****P: permanent mount
FT8****M: magnetic mount
FT8****F: front-facing permanent mount
I/O
Electronic
Board
Module
OPTIONS FOR PERMANENT MOUNT
• Two halogen alley or take-down lights.
• Two 400 Series Linear-LEDs.
OPTIONS FOR PERMANENT MOUNT
• Two halogen take-down or alley lights.
• Two front or two rear halogen flashing lights.
• Two front or two rear LED flashing lights.
PS
9MMEDGE
9MMEDG6
LFL LIBERTY™ MINI
■ Four Linear Super-LED modules, 2-1/2” high.
■ Optional halogen take-down and/or two
halogen alley lights (on permanent mount).
■ 5 year warranty on LEDs.
■ Size: 2-1/2” (64mm) H x
12” (304mm) W x
22” (558mm) L.
LT2****P: permanent mount
LT2****M: magnetic mount
LED
Electronic
POWER
SUPPLY
Module
LFL PATRIOT™ MINI
■ Sleek, aerodynamic profile, with 4 strobes
in our lowest profile lightbar.
■ Magnetic or permanent mount.
■ Optional take-downs, alley lights and single
flashers for 22” permanent mount only.
■ Extruded aluminum 2 piece chassis will
not sag, warp or bend.
■ 5 year warranty on power supply,
2 year warranty on strobe tubes.
■ Size: 2-1/2” (64mm) H x 12” (304mm) W
x 17-1/4” (44cm) or 22” (56cm) L.
MLFL17M: 17-1/4" magnetic mount
MLFL17P: 17-1/4" permanent mount
MLFL22M: 22" magnetic mount
MLFL22P: 22" permanent mount
OPTIONS FOR PERMANENT MOUNT
• Two halogen alley lights.
• One front halogen take-down light.
• One rear LED flasher.
POWER SUPPLY
WARNING: The use of any magnetic and/or
magnetic suction mounted light on the outside
of a moving vehicle is not recommended and
is at the sole risk of the user.
OPTIONS FOR PERMANENT MOUNT
• Two halogen alley lights.
• One front-facing halogen take-down light.
MINI CENTURION™
■ Useful for vehicles
where space is tight
or, due to the size of
the vehicle, the use of two mini lightbars
offers a benefit over the use of a single lightbar.
■ Permanent mount standard with two 1-1/2”
high permanent mount brackets.
■ Optional slide bolt mounts and 5” riser
permanent mount available.
■ 3 year warranty on motor assembly.
■ Size: 6-3/8” (161mm) H x 12” (304mm) W x
22” (56cm) L.
C200A000: two rotating halogen beacons,
diamond mirror, 17’ wiring harness
C200A00E: two rotating halogen beacons,
diamond mirror, 6” pigtail, no options available
C002A0**: two 22 watt, 360° strobe beacons,
with clear or color domes housed in a clear or
color outer lens
OPTIONS
• Two twin duplex take-downs, clear filter.
• One twin duplex California steady ID light, red
filter driver side, blue filter passenger side.
• Two twin duplex front or rear flashers,
electronic flasher, includes filter color of choice.
• Substitute an electro-mechanical flasher for
solid-state flasher.
• Two lower level intersector 14 Series strobes,
front facing, includes 20 watt power supply.
• Two lower level 17 Series strobes, front or
rear facing, includes 20 watt power supply.
• Two built-in cruise lights.
• Color filter for rotator.
10
8
Strobe
Strobe
“LIGHTBAR WIZARD” PROGRAM is available
on disk or at our website: www.whelen.com
C200A000/C200A00E
C002A0**
■ Permanent, magnetic or magnetic suction mounts.
■ Halogen versions have diamond mirror with 540
FPM (G1 Series) or 700 FPM (G2 Series). Motor
assembly has 3 year full factory warranty.
■ Strobe models contain either two Class 1 selfcontained strobe beacons (G5 Series), or two
Class 1 remote strobe heads; a built-in 40 watt
strobe power supply and full size diamond mirror
(G7 Series). Warranties are 2 years on strobe
power supply & 6 months on strobe flash tube.
■ Super-LED (G8 Series), two Super-LED beacons
& full size diamond mirror with 14 Scan-Lock™
flash patterns and 100,000 hours rated life,
with 5 year warranty.
■ Size: 5-7/8”(150mm) H x 17-5/16”(440mm) W x
7” (178mm) D.
G1 Series: Two 135 RPM rotators and full size
diamond mirror
G1M*: magnetic mount
G1P*: permanent mount
G1V*: magnetic suction mount
G2 Series: Two high speed 175 RPM rotators and
full size diamond mirror
G2M*: magnetic mount
G2P*: permanent mount
G2V*: magnetic suction mount
G5 Series: Two 2022 strobe beacons and full size
diamond mirror
G5M*: magnetic mount, color outer dome
G5P*: permanent mount, color outer dome
G5V*: magnetic suction mount, color outer dome
G5MC**: magnetic mount, clear outer dome,
color inner domes
G5PC**: permanent mount, clear outer dome,
color inner domes
G5VC**: magnetic suction mount, clear outer
dome, color inner domes
G7 Series: Two remote strobes, built-in 40 watt
power supply and half-size diamond mirror
G7M*: magnetic mount, color outer dome
G7P*: permanent mount, color outer dome
G7V*: magnetic suction mount, color outer dome
G7MC**: magnetic mount, clear outer dome,
color inner domes
G7PC**: permanent mount, clear outer dome,
color inner domes
G7VC**: magnetic suction mount, clear outer
dome, color inner domes
G8 Series: Two Super-LED beacons, full size
diamond mirror. For all models with clear inner
and outer domes, the color is created by the
LED color.
G8M*: magnetic mount, color outer dome
G8P*: permanent mount, color outer dome
G8V*: magnetic suction mount, color outer dome
G8MC**: magnetic mount, clear outer dome
G8PC**: permanent mount, clear outer dome
G8VC**: magnetic suction mnt., clear outer dome
* Replace asterisk in model number with color lens or LED
color desired: A = Amber, B = Blue, C= Clear, G = Green, R = Red
OPTIONS
• Color filter kit for G1 and G2 Series only,
customer installed.
• 90 lb. magnetic mount kit with cigar plug.
Strobe
Halogen
G5
G1/G2
Strobe
Strobe
Halogen
PS
G7
Strobe
Super
LED
Super
LED
G8
®
CenCom™ GOLD Siren Systems
The evolution of CenCom, the siren and light control system for emergency and
law enforcement professionals advances with CenCom Gold. When technology
takes a step up, so do the engineers at Whelen Engineering Company!
CenCom Gold provides the road-tested performance of the original CenCom
and adds the features you've been looking for.
CenCom™ GOLD,
REMOTE SIREN & CONTROL CENTERS
Configuration programming is easier than ever
with "drag and drop" feature and more flexibility to configure lights, traffic arrows and siren
function controls to your specific needs.
The single Amplifier/Relay Module (A.R.M.)
provides ease of access to fuses and connectors without removing the cover. Heavy-duty,
two-position Molex® power connector is
designed to handle rough treatment without
damage or accidental disengagement.
Easily programmable control head includes
a four-position slide switch (one 40-amp and
two 20-amp outputs) and eighteen programmable backlighted push buttons with bright
LED On/Off indicators.
■ Control your lights, traffic arrow and
siren functions from a single keypad.
■ Two models to choose from for
compatability with Traffic Advisors™ that do
and do not require external controls.
■ Easy to operate including true "Hands-Free"
On/Off light and siren operation.
■ Operates one or two 100-watt speakers.
■ Two models to choose from for
compatibility with Traffic Advisors™.
■ Easy to configure using Windows® XP
application program (included).
■ Configured programs may be extracted,
stored and modified for ease of service
and reuse.
■ Meets or exceeds all applicable SAE,
California Title XIII and NFPA requirements with various Whelen speakers.
■ A USB port in the A.R.M. provides easy
access for programming. (Control head
need not be connected for programming).
■ A single combination A.R.M. provides ease
of access to fuses and connectors without
removing the cover.
■ Bright red LED indicators are clearly
visible, even in bright sun.
■ On/Off, momentary, eight-second timer and
security double-tap eight-second timer can
be programmed through seven switches
individually.
■ Control panel can be easily surface mounted via Velcro® or U-bracket, standard.
Semi-flush mounting trim plate is optional.
■ Bright backlighted push buttons include
136 standard function labels to choose
from.
■ State-of-the-art membrane switches
provide tactile feedback of activation and
are equipped with a solid rubber overlay
for moisture resistance.
■ Twenty foot power and input/output
cabling with connectors, standard.
■ Two-year warranty on the system,
five-year warranty on amplifier.
■ The unidirectional microphone with plug-in
connector is standard. Optional 20’ microphone extension cable.
■ Single 8-conductor, 22-gauge cable
connects the control head to the A.R.M.
and provides heavy-duty service unlike
lightweight telephone style cables.
■ Size: Control Head: 3-1/2” (89mm) H x
6-7/8” (174mm) W x 1-5/16” (33mm) D.
Amplifier: 3” (78mm) H x 8-1/4” (210mm)
W x 6-3/4” (171mm) D.
GOLD
Bail bracket mount
Semi flush mount
CCSRN2: Control head with A.R.M.,
microphone and a 20’ power input/output
cable. Includes upgraded switching and
programming for more customization and
operates Whelen 2-wire Traffic Advisors
that do not require external controls.
CCSRNTA2: Same as above, but interfaces
with Traffic Advisors which do require
external control (full Traffic Advisor harness).
Dash mount.
Console flush mount.
11
®
295 Series Siren Amplifiers
Keep both hands on the wheel, both eyes on the road, and you’re still in
full control of emergency warning with Whelen Electronic Sirens.
In “Hands-Free” mode, a 295HF and 295HFS
Series siren will be in “standby” mode awaiting
instructions. You can turn the siren on, activate
Wail, Yelp or Piercer tones and turn the unit off
from the horn ring. No more eyes off the road
while fumbling for the siren controls with one
hand! Model 295HFS Series amplifiers are
microprocessor controlled and rated for 100
or 200 watt output, with the exception of
295HF100, rated @ 100 watts. Standard
features include Radio Rebroadcast, Public
Address, Manual, Wail, Yelp, Airhorn, and
Piercer tones. PTT (Push To Talk) switch on
unidirectional microphone over-rides all siren
functions. Contemporary styling complements
most Whelen power controls and Traffic
Advisor™ control consoles for proper aesthetic
stacking. An adjustable bail bracket allows
mounting in a variety of positions. Each model
is mounted on a slide out chassis with an
integral quick disconnect plug for ease of
maintenance or replacement. In 295HFS
models, SI TEST® provides a significant risk
management advantage. Two different real
time diagnostic tests include: Continuous
dynamic testing during normal siren operations
and a unique silent test while in the “Radio”
mode with the “Manual” button depressed.
During either operation, one or both red LED
lamps will extinguish instantly upon sensing
a siren or speaker(s) malfunction. SI TEST
instantly assures you of proper warning
capability and two speaker operation for high
risk situations. It also eliminates the need for
annoying siren “blasts” during vehicle
inspections or shift changes. Only Whelen
offers this “silent” testing, day or night.
■ Siren 295HFS Series features six functions,
plus radio repeat and public address.
■ Combination on/off and horn ring transfer
switch.
■ Adjustable microphone and radio repeat
volume controls.
■ 295HFSA5/6 has “Park-Kill” plus a timeout relay for shotgun lock, truck lock, etc.
■ Adjustable intensity backlighting in soft LED
non-glare green, bulb used on 295SL100.
■ Solid-state over/under voltage shutdown
and output short circuit protection.
■ Input polarity protection.
■ External spade-type fuse.
■ Adjustable bail bracket allows mounting
of unit in a variety of positions.
■ Activate siren tones via “Aux. Enable” input
(slide switch, power controls, or relay-toground connection).
■ Meets/exceeds Class A requirements of
SAE, AMECA, KKK1822 and California
Title XIII specifications.
ELECTRONIC
REMOTE SIREN AMPLIFIER
MODEL 295HFS3
■ Surface or under-dash control head.
■ Interconnection between control head
ELECTRONIC
and remote amplifier via three small,
SIREN AMPLIFIER
#18 gauge wires. All other connections
are to the remote amplifier 12-pin plug.
MODEL 295HFSA1
■
5 year warranty on amplifier.
■ Park-Kill feature.
■ Volume control knob on faceplate standard. ■ Size: Control Head: 2” (51mm) H x
6” (152mm) W x 2-3/8” (60mm) D.
■ Selectable 100 or 200 watt output, standard.
Amplifier: 2-3/8” (60mm) H x 6”
■ 5 year warranty on amplifier.
(152mm) W x 7” (178mm) D.
■ Size: 2-1/2” (64mm) H x 6” (152mm) W x
OPTION
6-7/8” (175mm) D.
MODEL 295HFSDA
MODEL 295HFSM1: same as 295HFSA1 but
Second amplifier kit for dual siren
with electronic mechanical siren tone in place amplifier use.
of Piercer tone.
MODEL 295HFSW1: same as 295HFSA1 but
with a Power Call type tone in place of
Piercer tone.
ELECTRONIC
REMOTE SIREN
AMPLIFIER
ELECTRONIC
REMOTE SIREN
AMPLIFIER
MODEL 295HFS2
■ Flush mount control head.
■ Selectable 100 or 200 watt output.
■ Interconnection between control head
and remote amplifier is via three small,
#18 gauge wires. All other connections
are to the remote amplifier 12-pin plug.
■ 5 year warranty on amplifier.
■ Size: Control head: 2-7/8” (73mm) H x
6-1/4” (159mm) W x 2-3/8” (60mm) D.
Amplifier: 2-3/8” (60mm) H x 6”
(152mm) W x 7” (178mm) D.
MODEL 295HFS2X: Same as above but with
dual amplifiers, meets California Title 13
requirements.
OPTION
MODEL 295HFSDA: Second amplifier
kit for dual amplifier use.
MODEL 295HFS4
■ Surface or under-dash mount.
■ Directly compatible with Whelen “LC”
Low Current series lightbars.
■ Compatible with other lightbars and
warning devices via a solid-state switching
module or relays.
■ Four position slide switch, five push-on/
push-off switches & one momentary switch.
■ Slide switch controls three separate primary
warning light functions and can be wired
to turn on siren in “full pursuit” mode.
■ Push-button switches control secondary
functions.
■ Each slide switch position and push button
switch has a colored LED for operating
status display.
■ Choice of 36 press-on legend tabs.
■ SI TEST®, silent self-diagnostic test.
■ Interconnection between control head
and remote amplifier is via three small,
#18 gauge wires. All other connections
are to the remote amplifier 12-pin plug.
■ 5 year warranty on amplifier.
■ Size: Control Head: 3-3/8” (86mm) H x 6”
(152mm) W x 2-3/8” (60mm) D.
Amplifier: 2-3/8” (60mm) H x
6” (152mm) W x 7” (178mm) D.
OPTION
MODEL 295HFSDA
Second amplifier kit for dual siren amplifier use.
12
10
295HFSA7
ELECTRONIC SIRENS
WITH 9-SWITCH LIGHT CONTROL
■ Park-Kill feature disables the siren tone
when the vehicle is in park.
■ Selectable 100 or 200 watt output.
■ Four position slide switch and five
push-on/push-off switches and one
momentary switch.
■ Push-button switches control secondary
functions.
■ Each slide switch position has a different
colored LED “On” indicator.
■ Push button switches have a green/red
LED indicator for operating status display.
■ Choice of 36 press-on legend tabs.
■ 5 year warranty on amplifier.
■ Model 295HFSA5 features low current
switching: a four-position, three function
slide switch which controls three
separate primary warning light functions
and can be wired to turn on siren in “full
pursuit” mode, plus five push-on/push-off
switches and a programmable switch with
four choices: momentary, 8 second timer,
latch-on/latch-off or flasher mode.
■ Model 295HFSA6 has the same switch
configuration but the slide switch and
push buttons control nine internal
high current solid-state drivers. Each of
the six push buttons activate one 10 amp
output. Slide switch activates a 20 amp
circuit, and can be wired, via a dipswitch
to control a three position program
pattern. The sixth position push button
may be dipswitch set for momentary, 8
second timer, latch-on/latch-off, or flasher
modes. Most high current applications
such as strobe power supplies, headlight
and brakelight flashers can be controlled
by the 295HFSA6.
■ Size: 3-5/16” (84mm) H x 6” (152mm)
W x 8-3/8” (213mm) D.
MODEL 295HFSA5:
Low current switching.
MODEL 295HFSA6:
Standard current switching.
MODEL 295HFSM5:
Same as 295HFSA5 but with electronic
mechanical siren tone in place of Piercer
tone.
295HFSA8 with
amplifier &
removable
microphone
295SL100
REMOTE DUAL ELECTRONIC SIRENS
■ Meets SAE J1849 and CA Title XIII
specifications.
■ Operates in dual or mono modes.
■ Two 100-watt speakers.
■ Outputs two independent siren tones
creating rich harmonic dual tone sound.
■ External dipswitch selects modes
of operation.
■ PTT (Push To Talk) switch on microphone
overrides all siren functions.
■ Removable unidirectional microphone.
■ Input polarity protection, output short
circuit protection.
■ Size: 3-5/16” (84mm) H x 6” (152mm) W
x 8-3/8” (213mm) D.
MODEL 295HFSA7:
Flush mount control head
MODEL 295HFSA8:
Surface mount control head
MODEL 295HFSC9
■ Self-contained 200 watt dual amplifier
siren, with removable microphone.
■ Choice of mono or stereo sound via
switch.
■ Full function siren similar to Whelen’s
295HFSA1 siren amplifier.
■ Dip switch programmable for custom
siren tones.
■ Includes Hands-Free operation, and
radio repeat.
295SL101
100 WATT ELECTRONIC SIREN
MODELS 295SL100 & 295SL101
■ Economically priced full function siren,
plus radio repeat and public address.
■ Operates up to two 100 watt speakers.
■ Includes Hands-Free operation and
Scan-Lock™ siren tones.
■ Self-contained unit for under-dash
mounting.
■ Backward compatible to the original
295HF100 and WS2100 Series.
■ 2 year warranty.
■ Size: 2-1/2” (64mm) H x 6” (152mm) W
x 5-1/2” (138mm) D.
MODEL 295SL100:
12 VDC, hard wired microphone standard.
MODEL 295SL101:
12 VDC, removable microphone with a
volume control knob.
13
®
Siren Amplifiers
Economical and waterproof sirens are perfect
for volunteer fire personnel, security, escort,
undercover vehicles, motorcycles
and marine use.
BETA1
BETA2
ALPHA12S
WPA1
BETA112R
BETA SERIES
ALPHA12R
ALPHA SWITCHES
ALPHA SERIES
■ Economical, four tone, 100 watt siren for
applications not requiring public address
or radio repeat.
■ Self-contained and remote models.
■ Meets Class A requirements with most
100 Watt speakers.
■ Hands-Free operation.
■ Dip switches on rear of amplifier allow
easy set-up and configuration to most
local requirements.
■ Optional switch panels or customer
supplied switching may be used with
ALPHA12R.
ALPHA12S: Self-contained 12 VDC siren.
Size: 2-1/2" (64mm) H x 6" (152mm) W x
4-5/8" (117mm) D.
ALPHA12R: Remote 12 VDC siren amplifier.
Requires separate switches, sold separately.
Size: 2-3/8" (60mm) H x 7-1/8" (181mm) W
x 4" (102mm) D.
ALPHA 1,2,3, 4 & 5: Optional switches
for ALPHA12R.
ALPHA12M: 100 watt siren, choose electronic
mechanical siren tone with airhorn or Power
Call® (warble and whoop plus wail) via built-in
dip switch and airhorn.
Size: 2-3/8” (60mm) H x 7-1/8”(181mm) W x
4” (102mm) D.
ALPHA22M: 100/200 watt siren, choose from
electronic mechanical tone siren and airhorn;
Power Call® (warble and whoop plus wail)
via built-in dip switch and airhorn for use with
remote switches, purchased separately.
Size: 2-1/2” (64mm) H x 5-7/8” (149mm) W x
6-3/4” (171mm) D.
■ Economical, four tone, 100 watt remote
siren amplifier with Radio Repeat and
Public Address.
■ Hands-Free operation.
■ Meets Class A requirements with most
100 watt speakers.
■ PA over-ride in all functions.
■ Use with compact BETA1 and BETA2
Control Heads or customer supplied
switching.
■ Dip switches on rear of amplifier allow
easy set-up and configuration
to most local requirements without
special ordering.
BETA112R: Remote 12 VDC siren amplifier
with PA and Radio Repeat. Size: 2-3/8"
(60mm) H x 7-1/8" (181mm) W x 5-1/2"
(140mm) D.
BETA1: Control Head with noise cancelling
microphone, 15' cable. Size: 2" (51mm) H
x 4-1/2" (114mm) W x 2-1/2" (64mm) D.
BETA2: Fully encapsulated control head is
moisture resistant. Sealed toggle and rotary
switches. Removable noise cancelling
microphone. 20' cable and connectors.
Size: 1-3/4" (44mm) H x 4-1/4" (108mm) W
x 2" (51mm) D.
BETA2BKT: Optional flush mounting bracket
for BETA2 and WPA1 Series control heads.
PAP112 (shown with optional
microphone extension
cable)
WPA112
WPA SERIES
■ Water-resistant 100 watt siren amplifier
and control heads for motorcycle and
marine use.
■ Four-tone siren plus Public Address and
Radio Repeat.
■ Hands-Free operation. WPA Series amplifiers work with WPA Series control heads
or customer supplied controls.
■ Fully encapsulated, control heads feature
sealed toggle and rotary switches and
removable noise cancelling microphone.
WPA112: 100 watt, 12 VDC, remote
amplifier. Weathertight, extruded
aluminum housing for rugged
environment. Size: 2-7/8" (73mm) H x
3-1/2" (89mm) W x 7-7/8" (200mm) D.
WPA1: Control Head with three position
toggle switch enables control for siren only
functions or combined light and siren
operation. Includes handlebar mounting
bracket, 7-1/2’ cable and connectors.
Size: 1-3/4" (44mm) H x 4-1/4" (108mm) W
x 2” (51mm) D.
WPA2: Control Head with flush mounting
bracket, 20’ cable and connectors.
Size: Cutout: 1-3/4" (44mm) H x 4-1/4"
(108mm) W. Bracket: 2-1/2" (64mm) H
x 5-1/4" (133mm) W. Protrusion: 3/4"
(19mm). Recess: 4-1/4" (108mm).
PAH112 and PAP112
■ Delivers 100 watts to a 100 watt siren
speaker (purchased separately).
■ Housing mounts in trunk, under
the seat or other remote location.
PAH112: Power Airhorn 100 watt amplifier
(electronic amplifier only), 12.8 VDC.
Size: 2-1/2" (64mm) H x 5-7/8" (149mm)
W x 6-3/4" (171mm) D.
PAP112: Power Airhorn plus 100 watt
amplifier with public address and microphone, 12.8 VDC.
Size: 2-1/2" (64mm) H x 5-7/8" (149mm) W
x 6-3/4" (171mm) D.
PAPEXT15: Optional 15’ extension cable
for PAP112 microphone.
14
WPA2
WPA1 HANDLEBAR MOUNT
HANDLEBAR MOUNT (BACK VIEW)
®
Speakers
SA314P
100 watt high efficiency speakers for underhood, bumper
and lightbars cover you with high impact sound at all levels.
3 year warranty on speaker drivers.
SA340TS
100 watt high efficiency RMS plastic
rectangular speaker horn.
Size: 5” (127mm) H x 8” (203mm) W x
7” (178mm) D.
PROJECT A-FLEX®
Designed for underhood applications. Flexible
60” acoustical tube allows the speaker driver
to be mounted virtually any distance from
the horn. With 100 watt RMS driver and
mounting kit or available as kit for customersupplied 100 watt driver.
SA340STS
Compact, round aluminum speaker
horn. 100 watt, high efficiency driver.
Size: 5-5/8” (143mm) H x 5-5/8” (143mm) W
x 6-13/16” (173mm) D.
SP123C
Designed for use with Centurion™ Series lightbars. 100 watt speaker is center mounted.
®
SA40/SA41
Low profile, heavy-duty structural
polycarbonate housing and field
replaceable 100 watt RMS speaker
driver. Easily retrofits to Edge® 9M
Series lightbars.
SA40: Lo-Pro™ speaker
SA41: Lo-Pro speaker kit for customer
supplied driver.
SA314A
SA314A,
SA314B,
SA314P
Projector™ Series high performance,
multi-port 100 watt speaker puts high
performance traffic clearing warning sound
where it counts: down and in front of your
vehicle. Properly installed away from your
vehicle's interior, this speaker complies
with OSHA 1910.95 guidelines regarding
"Permissible Noise Exposure." Narrow,
non-corrosive aluminum or nylon composite
housing provides ease of mounting. Installs
to vehicle’s cross member in minutes. All
models exceed CA Title XIII, Class A and
SAE J1849 requirements. Available in cast
aluminum natural finish, black epoxy coated
finish or black nylon/composite. Options
include universal mounting bracket or
brackets for Ford Crown Victoria, Explorer
and Excursion; Chevy models Impala,
Suburban, Tahoe, Blazer and Avalanche
plus Dodge Intrepid and BMW motorcycle.
Refer to current price list for details.
Size: 6-3/16” (156mm) H x 6-7/16”
(163mm) W x 3-1/2” (80mm) D.
SA314A: Natural cast aluminum housing.
SA314B: Aluminum, black epoxy coated.
SA314P: Black nylon/composite.
Switch Control Centers
Heavy-duty control centers provide reliable switching control for all
types of emergency lighting including lightbars, flashers, power supplies
and beacons. Available with or without relays or high current drivers.
PCCS9NP
Low current switch center for use with Edge®
9M, Edge® Ultra LC, Edge® Ultra Freedom,
LFL Patriot™ and LFL Liberty™ Series lightbars.
Low profile, all extruded aluminum housings.
Four position programmable slide switch,
five push-on/push-off switches and a
programmable switch with four choices
(momentary, 8 second timer, latch-on/
latch-off or flasher mode). LED "On" indicator.
Back-lighted legend windows, 72 standard
press-on legend tabs. Adjustable bail bracket.
Size: 2” (51mm) H x 6-1/8” (156mm) W x
3-5/8: (92mm) D.
PCCS9R
Connects to most rotating and strobe
lightbars without separately mounted relay
or relay boxes. Low profile, all extruded
aluminum housings. Nine switch functions
with programmable slide lever for three
primary warning controls. LED “On” indicator.
Six push button switches for secondary
functions (5 On/Off and 1 momentary).
Back-lighted legend windows, 72 standard
press-on legend tabs included. Adjustable
bail bracket.
Size: 2” (51mm) H x 6-1/8” (156mm) W x
7-1/8” (182mm) D.
PCCHD1
Six heavy-duty
25 amp SPST circuit breaker
switches. LED On/Off indicators, back-lighted
legends, 72 legend tabs included.
Size: 2-3/8” (60mm) H x 6” (152mm) W x
5-3/8” (137mm) D.
PCCHD2: Replaces first switch of the
PCCHD1 with a 40 amp circuit for use as
master switch or high current applications.
PCC6R
PCC10
PCC6R and PCC10
Six or ten lighted SPST switches rated
20 amps peak. Back-lighted legend tabs,
72 standard legend tabs included.
Installation is easy with a rear mounted
"captive" terminal block.
Size: 2-1/2’ (64mm) H x 6” (152mm) W x
4-3/4” (121mm) D.
PCC6R: Six switches; one 40 amp switch,
five 20 amp switches.
PCC10: Ten 20 amp switches.
SWITCH BRACKETS
1SWITCH through 4SWITCH:
One, two, three or four PC switch brackets
available. Choice of illuminated or nonilluminated switches. Specify switch type
described below.
1SWITCH: 1 switch bracket with switch
of your choice.
2SWITCH: 2 switch brackets with switches
of your choice.
3SWITCH: 3 switch brackets with switches
of your choice.
4SWITCH: 4 switch brackets with switches
of your choice.
PC-1: single pole, single throw, illuminated
On/Off
PC-2: single pole, single throw, momentary On
PC-3: single pole, double throw, illuminated,
On/Off/On
PC-4: single pole, double throw, On/On
PC-5: double pole, double throw, On/Off/On
PC5S: double pole, double throw, for strobe,
Hi/Off/Low
15
“ENGINEERS FOR THE EMERGENCY WARNING INDUSTRY”
DISTRIBUTED BY:
Whelen Engineering Co., Inc. designs and manufactures audible and visual signalling products that are used for automotive warning, public and industrial
warning and general aviation. Using the latest technology, Whelen leads the industry in optics, acoustics, electronics and microprocessor technology. Our
products are designed to provide maximum warning protection for the vehicle, its occupants and the public.
®
Whelen Products are
designed & manufactured
in the U.S.A.
ENGINEERING COMPANY, INC.
Route 145, Winthrop Road
Chester, Connecticut 06412
860-526-9504 • fax 860-526-4078
www.whelen.com
© 2006 Whelen Engineering Company, Inc. Printed in the U.S.A. Whelen Engineering
reserves the right to upgrade and improve products without notice. Code 11402E-0506
NASCAR® is a registered trademark of the National Association for Stock Car Auto Racing, Inc.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement