musicCOST
~
musicCOST
OWNER'S MANUAL
MODE D'EMPLOI
IMPORTANT SAFETY INSTRUCTIONS
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
• Explanation of Graphical Symbols
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert you to the
presence of uninsulated "dangerous voltage" within
the product's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle
is intended to alert you to the presence of important
operating and maintenance (servicing) instructions
in the literature accompanying the appliance.
IMPORTANT
Please record the serial number of this unit in the space below.
MODEL:
Serial No.:
The serial number is located on the rear of the unit. Retain this
Owner' s Manual in a safe place for future reference.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has
two blades and a third grounding prong. The wide blade
or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
Only use attachments/accessories specified by the
manufacturer.
Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the apparatus.
• ~
When a cart is used, use caution when
moving the cart/apparatus combination to
r.t:
avoid injury from tip-over.
Unplug this apparatus during lightning storms or when
unused for long periods of time.
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been
dropped.
®
tS
We Want You Listening For A Lifetime
Yamaha and the Electronic Industries Association's Consumer Electronics Group want you to get the most out of your
equipment by playing it at a safe level. One that Jets the sound come through loud and clear without annoying blaring or
distortion - and, most importantly, without affecting your sensitive hearing. Since hearing damage from loud sounds is
often undetectable until it is too late, Yamaha and the Electronic Industries Association's Consumer Electronics Group
recommend you to avoid prolonged exposure from excessive volume levels.
a
LISTENING
FDI'A L!~me ===
i En
Important safety instructions
FCC INFORMATION (for US customers)
IMPORTANT NOTICE: DO NOT MODIFY THIS
UNIT!
This product, when installed as indicated in the
instructions contained in this manual, meets FCC
requirements. Modifications not expressly approved by
Yamaha may void your authority, granted by the FCC,
to use the product.
2 IMPORTANT: When connecting this product to
accessories and/or another product use only high quality
shielded cables. Cable/s supplied with this product MUST
be used. Follow all installation instructions. Failure to
fo llow instructions could void your FCC authorization to
use this product in the USA.
3 NOTE: This product has been tested and found to
comply with the requirements listed in FCC
Regulations, Part 15 for Class "B" digital devices.
Compliance with these requirements provides a
reasonable level of assurance that your use of this
product in a residential environment will not result in
harmful interference with other electronic devices.
This equipment generates/uses radio frequencies and,
if not installed a nd used according to the instructions
found in the users manual, may cause interference
harmful to the operation of other electronic devices.
FCC CAUTION
Change or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
FOR CANADIAN CUSTOMERS
To prevent electric shock, match wide blade of plug: to wide
slot and full y insert.
CAN ICES-3(B)/NMB-3(B)
Compliance with FCC regulations does not guarantee
that interference will not occur in all installations. If
this product is found to be the source of interference,
which can be determined by turning the unit "OFF"
and "ON", please try to eliminate the problem by using
one of the following measures:
Relocate either this product or the device that is being
affected by the interference.
Utilize power outlets that are on different branch
(circuit breaker or fuse) circuits or install AC line
filter/s .
In the case of radio or TV interference, relocate/
reorient the antenna. If the antenna lead-in is 300 ohm
ribbon lead, change the lead-in to coaxial type cable.
If these corrective measures do not produce
satisfactory results, please contact the local retailer
authorized to distribute thi s type of product. If you can
not locate the appropriate retailer, please contact
Yamaha Corporation of America A/V Division, 6600
Orange thorpe A venue, Buena Park, CA 90620, USA.
The above statements apply ONLY to those products
distributed by Yamaha Corporation of America or its
subsidiaries.
COMPLIANCE INFORMATION STATEMENT
(DECLARATION OF CONFORMITY PROCEDURE)
Responsible Party:
Yamaha Corporation of America AIY Division
Address:
6600 Orangethorpc Avenue, Buena Park, CA
90620, USA
Telephone:
1-714·522-901 1
Type of Eq uipment: Network Receiver
Mode l Name:
R- N602
This device complies with Pan 15 of FCC Rules and Industry Canada
licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
( I) this device may not cause interference, and
(2) this device must accept any interference. including inte rference that
may cause undesired operation of this device.
NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
-
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a c ircuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the
FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-1 02 of the IC radio frequency (RF)
Exposure rules. This equipment should be installed and operated keeping the radiator at least 20cm or more away from
person's body (excluding extremities: hands, wrists, feet and ankles).
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
ii
En
Caution: Read this before operating your unit.
1 To assure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
2
3
4
5
6
7
8
9
10
11
12
13
Install this sound system in a well ventilated, cool, dry, clean
place - away from direct sunlight, heat sources, vibration,
dust, moisture, and/or cold. For proper ventilation, allow the
following minimum clearances.
Top: 30 em (11-3/4 in)
Rear: 20 em (7-7/8 in)
Sides: 20 em (7-7/8 in)
Locate this unit away from other electrical appliances, motors,
or transformers to avoid humming sounds.
Do not expose this unit to sudden temperature changes from
cold to hot, and do not locate this unit in an environment with
high humidity (i.e. a room with a humidifier) to prevent
condensation inside this unit, which may cause an electrical
shock, fire, damage to this unit, and/or personal injury.
Avoid installing this unit where foreign objects may fall onto
this unit and/or this unit may be exposed to liquid dripping or
splashing. On the top of this unit, do not place:
- Other components, as they may cause damage and/or
discoloration on the surface of this unit.
- Burning objects (i.e. candles), as they may cause tire,
damage to this unit, and/or personal injury.
- Containers with liquid in them, as they may fall and liquid
may cause electrical shock to the user and/or damage to
this unit.
Do not cover this unit with a newspaper, tablecloth, curtain,
etc. in order not to obstruct heat radiation. If the temperature
inside this unit rises, it may cause fire, damage to this unit,
and/or personal injury.
Do not plug in this unit to a wall outlet until all connections
are complete.
Do not operate this unit upside-down. It may overheat,
possibly causing damage.
Do not use force on switches, knobs and/or cords.
When disconnecting the power cable from the wall outlet,
grasp the plug; do not pull the cable.
Do not clean this unit with chemical solvents; this might
damage the finish. Use a clean, dry cloth.
Only voltage specified on this unit must be used. Using this
unit with a higher voltage than specified is dangerous and may
cause fire, damage to this unit, and/or personal injury. Yamaha
will not be held responsible for any damage resulting from use
of this unit with a voltage other than specified.
To prevent damage by lightning, keep the power cord
disconnected from a wall outlet or the unit during a lightning
storm.
18
19
20
21
22
Condensation will form when the surrounding temperature
changes suddenly. Disconnect the power cable from the
outlet, then leave this unit alone.
When using this unit for a long time, this unit may become
warm. Turn the system off, then leave this unit alone for
cooling.
Install this unit near the wall outlet and where the AC power
plug can be reached easily.
The batteries shall not be exposed to excessive heat such as
sunshine, fire or the like. When you dispose of batteries,
follow your regional regulations.
Excessive sound pressure from earphones and headphones
can cause hearing loss.
This unit is not disconnected from the AC power source as long as
it is connected to the wall outlet, even if this unit itself is turned off
by<!.>. This state is called the standby mode. In this state, this unit is
designed to consume a very small quantity of power.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
Do not use this unit within 22 em (9 inches) of persons with a heart
pacemaker implant or defibrillator implant.
This label is required to be attached to a product of which the
temperature of the top cover may be hot during operation.
14 Do not attempt to modify or fix this unit. Contact qualified
Yamaha service personnel when any service is needed. The
cabinet should never be opened for any reasons.
15 When not planning to use this unit for long periods of time (i .e.
vacation), disconnect the AC power plug from the wall outlet.
16 Be sure to read the "Troubleshooting" section in the owner's
manual on common operating errors before concluding that
this unit is faulty.
17 Before moving this unit, press <9 downward to turn off this
unit and then disconnect the AC power plug from the AC wall
outlet.
iii
En
Caution: Read this before operating your unit.
• Notes on remote controls and batteries
Do not spill water or other liquids on the remote control.
Do not drop the remote control.
Do not leave or store the remote control in the following
conditions:
- places of high humidity, such as near a bath
places of high temperatures, such as near a heater or stove
- places of extremely low temperatures
- dusty places
Insert batteries according to the polarity markings (+ and -).
Change all batteries if you notice the operation range of the
remote control narrows.
If the batteries run out, immediately remove them from the
remote control to prevent an explosion or acid leak.
If you find leaking batteries, discard the batteries
immediately, taking care not to touch the leaked material. If
the leaked material comes into contact with your skin or gets
into your eyes or mouth, rinse it away immediately and
consult a doctor. Clean the battery compartment thoroughly
before installing new batteries.
Do not use old batteries together with new ones. This may
shorten the life of the new batteries or cause old batteries to
leak.
Do not use different types of batteries (such as alkaline and
manganese batteries) together. Read the packaging carefully
as these different types of batteries may have the same shape
and color.
Before inserting new batteries, wipe the battery compartment
clean.
Keep the batteries in a location out of reach of children.
Batteries can be dangerous if a child were to put in his or her
mouth.
If the batteries grow old, the effective operation range of the
remote control decreases considerably. If this happens,
replace the batteries with new one as soon as possible.
If you plan not to use the unit for a long period of time,
remove the batteries from the unit. Otherwise. the batteries
will wear out, possibly resulting in a leakage of battery liquid
that may damage the unit.
Do not throw away batteries with general house waste.
Dispose of them correctly in accordance with your local
regulations.
Bluetooth
• 8/uetooth is a technology for wireless communication between
devices within an area of about I 0 meters (33 ft) employing the
2.4 GHz frequency band, a band which can be used without a
license.
Handling 8/uetooth communications
• The 2.4 GHz band used by 8/uetooth compatible devices is a
radio band shared by many types of equipment. While
8/uetooth compatible devices use a technology minimizing the
influence of other components using the same radio band, such
influence may reduce the speed or distance of communications
and in some cases interrupt communications.
• The speed of signal transfer and the distance at wh ich
communication is possible diffe rs according to the distance
between the communicating devices, the presence of obstacles,
radio wave conditions and the type of equipment.
• Yamaha does not guarantee all wireless connections between
this unit and devices compatible with 8/uetooth function.
iv En
Contents
INTRODUCTION
Listening to Internet radio ....................................... 32
What you can do with this unit ................................. 2
Registering favorite Internet radio stations
(bookmarks) ............................................................. 33
Sources that can be played back on this unit ................. 2
Mastering useful apps (MusicCast CONTROLLER) .... 3
Playing back iPod/iTunes music via a network
(AirPlay) ................................................................. 34
Supplied accessories ................................................... 4
Controls and functions ............................................... 5
Front panel .....................................................................
Front display ..................................................................
Rear panel ......................................................................
Remote control. ..............................................................
5
7
8
9
Connections ............................................................... 11
12
13
14
14
14
Connecting to network ............................................. 15
Sharing the iOS device setting .....................................
Using the WPS push button configuration ..................
Set the wireless network connection manually ............
Connecting a mobile device to the unit directly
(Wireless Direct) .....................................................
Verify the network connection status .......... ........ .. ......
16
17
18
19
20
BASIC OPERATION
Playback .................................................................... 21
Playing a source ........................................................... 21
Using the sleep timer ................................................... 23
Listening to FM/AM radio ....................................... 24
FM/AM tuning ............................................................. 24
Automatic preset tuning (FM stations only) ................ 24
Manual tuning preset ................................................... 25
Recalling a preset station ............................................. 26
Clearing a preset station ............................................... 26
Playing back music via Bluetooth ............................ 27
Connecting a Bluetooth device (pairing) ..................... 27
Playing back Bluetooth device contents ...................... 27
Disconnecting a Bluetooth connection ........................ 28
Playing back music stored on media servers
(PCs/NAS) ............................................................. 29
Setting the media sharing of music files .................... :. 29
Playback of PC music contents .................................... 30
•
•
•
•
Connecting a USB storage device ............................... 36
Playback of USB storage device contents ................... 36
Playing back iPod music ........................................... 38
Connecting an iPod ...................................................... 38
Playback of iPod content ............................................. 3 8
PREPARATION
Connecting the speakers ..............................................
Connecting the FM and AM antennas .........................
Connecting the network cable .....................................
Preparing a wireless antenna .......................................
Connecting power cable ..............................................
Playback of iPod/iTunes music contents ..................... 34
Playing back music stored on a USB storage
device ...................................................................... 36
Switching information on the front display ............ 40
Registering the current playback song/station
(Preset function) .................................................... 41
Registering to a preset ................................................. 41
Recalling a preset.. ....................................................... 41
ADVANCED OPERATION
Configuring playback settings for different
playback sources (Option menu) ........................ .42
Option menu items ....................................................... 42
Configuring various functions (Setup menu) ......... 43
Setup menu items ......................................................... 43
Network ....................................................................... 44
Bluetooth ..................................................................... 45
Max Volume ................................................................ 46
Initial Volume .............................................................. 46
AutoPowerStdby (Auto Power Standby) ..................... 46
ECO Mode ................................................................... 46
Configuring the system settings
(ADVANCED SETUP menu) ............................... 47
ADVANCED SETUP menu items .............................. 47
Changing the speaker impedance setting (SP IMP.) ... 47
Selecting the remote control ID (REMOTE ID) .......... 47
Restoring the default settings (INIT) ........................... 47
Updating the firmware (UPDATE) ............................. 48
Checking the firmware version (VERSION) ............... 48
Updating the unit's firmware via the network ...... .49
ADDITIONAL INFORMATION
Troubleshooting......................................................... SO
Error indications on the front display ..................... 56
Trademarks ............................................................... 51
Specifications ............................................................. 58
Index ........................................................................... 59
"Note" indicates precautions for use of the unit and its feature limitations. >'/,!<indicates supplementary explanations for better use.
This manual explains operations using the supplied remote control.
This manual describes all the ''iPod" and "iPhone" as the ''iPod". ''iPod" refers to ''iPod" and "iPhone", unless otherwise specified.
In this manual, iOS and Android mobile devices are collectively referred to as "mobile devices". The specific type of mobile
device is noted in explanations as needed.
1
En
What you can do with this unit
This unit is a network receiver compatible with a network source such as a media server and mobile device.
It supports playback from not only analog sources such as a CD player but also Bluetooth devices and network streaming
servtces.
CD Internet
(g) Streaming service
.a -- ~
\.O •e
Modem
D
...••
~
1/f
···~····~···········
.•
I
Router*
@ Pc
@ AirPlay (iTunes)
.. ~···
.--..
0•
Mobile
device
_
0-- )'\,,
~
@ NAS
(J) iPod
@
@ AirPlay (iPod)
@ Bluetooth
USB
device
® CD player etc.
• You need a commercially available wireless router (access point) when you use a mobile device.
CD
Play back the Internet radio (p. 32)
®
Play back the streaming service
(see the supplement for each service.)
G) Play back music files stored on your PC (p. 29)
@ Play back music files stored on your NAS
(p. 29)
® Play back music files stored on your iPod/
iTunes with AirPlay (p. 34)
® Play back audio content from Bluetooth
devices (p. 27)
(j) Play back music files stored on your iPod
(p. 38)
® Play back music files stored on your USB
device (p. 36)
® Play back your external component (p. 11)
@) Listening to FM/AM radio (p. 24)
,,,
~ "' ~
For details on connecting the external devices. sec "Connections" (p. 11 ).
2
En
What you can do with this unit
You can operate and program the unit, or play streaming services via this unit, by installing the free dedicated MusicCast
CONTROLLER app on a mobile device. For details, search for "MusicCast CONTROLLER" on the App Store or
Google Play.
•
•
•
•
•
•
•
MusicCast CONTROLLER capabilities
Basic operations of the unit (turn on/standby, adjust volume and select input)
Play songs stored on computers (servers)
Select an Internet radio station
Play music stored on mobile devices
Play music on streaming service
Distribute and receive audio between the unit and other Yamaha MusicCast supported devices
See MusicCast Setup Guide for details.
3
En
Supplied accessories
Check that the following accessories are supplied with the product.
Remote control
AM antenna
0""00
o"
o
"(5'"(5' '0
000
'6' 0 0
0~
MusicCast Setup Guide
OYAMAHA
@YAMAHA
4 En
--
FM antenna
BaHerles (x2)
(AA, R6, UM-3)
Controls and functions
1 21----31-------41_5_6_7_8_9-t-111-- -112---------1131------,.
OYAMAHA
[---- I-ll
mu=
----
-.,-.o-l~':uu->'1-1~:.-Q "";.'I
~<?
__<?} ~<? __<?}
-...
.--
I
-IDIIII CT
0
I
0 ,
,____
I
I
I
I
0
CD <!> (power)
Turns on/off (standby) the unit.
(g) STANDBY/ON indicator
Lights up as follows:
Brightly lit: Power is on
Dimly lit: Standby mode
(j) MEMORY
Registers the current FM/AM station as a preset when
TUNER is selected as the input source (p. 25).
Registers the current playback song or streaming station
as a preset when NET, USB (except iPod) are selected as
the input source (p. 41 ).
@ CLEAR
In standby mode, this unit consumes a small amount of power to
receive infrared signals from the remote control.
@ Remote control sensor
Receives infrared signals from the remote control.
@ DIMMER
Changes the brightness level of the front display. Choose
brightness from 5 levels by pressing this button
repeatedly.
® DISPLAY
Selects the information displayed on the front display
(p. 40).
®
MODE
Sets the FM band reception mode to automatic stereo or
monaural (p. 24).
Switches the iPod operation modes (p. 39).
Clears a FM/ AM preset station when TUNER is selected
as the input source (p. 26).
®
BAND
Switches between FM and AM (p. 24).
@) Front display
Shows information about the operational status of this
unit.
@ PRESET(/)
Recalls a preset FM/AM station (p. 26) or song/streaming
station (p. 41 ).
@ TUNING ((I))
Selects the tuning frequency when TUNER is selected as
the input source (p. 24).
@ PURE DIRECT and indicator
Allows you to listen to a source in the purest possible
sound (p. 21 ). The indicator above it lights up and the
front display turns off when this function is turned on.
5
En
.
Controls and functions
OYAMAHA
m..sT=
<!>
0
D 0
PHONES
0
0
0
0
... ---- ...I
I
SPf'AKf'RS
I
/&
II
0
0
0
0
0
0
TREBLE
.-
0
I
0 :_~ -~~
_.
·.
18
_.
0
·.
,•
~·~
·.
19
@ PHONES jack
Outputs audio to your headphones for private listening.
@ SPEAKERS AlB
Turns on or off the speaker set connected to the
SPEAKERS A and/or SPEAKERS 8 terminals on the rear
panel each time the corresponding button is pressed.
@ LOUDNESS control
Retains a full tonal range at any volume level to
compensate for the human ears' loss of sensitivity to high
and low-frequency ranges at a low volume level (p. 22).
@ SELECT/ENTER (jog dial)
Tum the dial to select a numeric value or setting, and press
the dial to confirm.
@ USBjack
For connecting a USB storage device (p. 36) or an iPod
® RETURN
(p. 38).
Returns to the previous indication of the front display.
@ INPUT selector
Selects the input source you want to listen to.
CONNECT
Use to control the unit using the dedicated MusicCast
CONTROLLER app for mobile devices. See MusicCast
Setup Guide for details.
@ BASS +/- control
Increases or decreases the low frequency response. The
center position produces a flat response (p. 22).
@ TREBLE +/- control
Increases or decreases the high frequency response. The
center position produces a flat response (p. 22).
®
BALANCE control
Adjusts the sound output balance of the left and right
speakers to compensate for sound imbalances caused by
speaker locations or listening room conditions (p. 22).
6
En
@ VOLUME control
Increases or decreases the sound output level.
Controls and functions
,,,
~<i>~
If the network connection is not set, tum the power ON to display "WAC" (Wireless Accessory Configuration) on the front panel and
trigger an automatic iOS device search. See "Sharing the iOS device setting" (p. I 6) for details on the iOS device and network
connection.
CD
Information display
Displays the current status (such as input name).
You can switch the information that is displayed when you
press DISPLAY on the front panel (p. 40).
®
(j) SLEEP
Lights up when the sleep timer is on.
® MUTE
Blinks when audio is muted.
STEREO
Lights up when the unit is receiving a stereo FM radio
signal.
®
Volume indicator
Indicates the current volume.
@ TUNED
@ Cursor indicators
Lights up when the unit is receiving an FM/AM radio
station signal.
Indicate the remote control cursor keys currently
operational .
G) Signal strength indicator
Lights up when the unit connects to a wireless network or
operates as an access point. The strength of the wireless
network signal can be verified by the indicator status.
,,,
~<i>~
You can change the brightness level of the front display by
pressing DIMMER on the front panel (p. 5).
®
Bluetooth indicator
Lights up when the unit is connecting to a Bluetooth
device.
® Speaker indicators
"A" lights up when the SPEAKERS A output is enabled
and "B" lights up when the SPEAKERS 8 output is
enabled.
7
En
Controls and functions
+
8
-
-
@
+
(¥@A~
@[email protected]@[email protected]
11
CD PHONO jacks
For connecting to a turntable (p. 11).
® Power cable
For connecting to an AC wall outlet (p. 14).
®
®
OPTICAL 1/2 jacks
For connecting to audio components equipped with
optical digital output (p. 11 ).
@ ANTENNA terminals
For connecting to FM and AM antennas (p. 13).
@ COAXIAL 112 jacks
For connecting to audio components equipped with a
coaxial digital output (p. 11 ).
@ SPEAKERS terminals
Used to connect speakers (p. 12).
@ NETWORK jack
For connecting to a network with a network cable (p. 14).
(J) Wireless antenna
For connecting to a network device wirelessly (p. 14).
8 En
LINE 1-3 jacks
For connecting to analog audio components (p. II).
@ CD jacks
For connecting to a CD player (p. II).
@ SUBWOOFER PRE OUT jack
For connecting to a subwoofer with built-in amplifier
(p. 11).
Controls and functions
CD Infrared signal transmitter
Sends infrared signals.
IG
0-0
SPEAKERS
C>
SlEEP
PHONO
0
0
0
0
0
0
0
COAX1
3}--~
II
I
0
0
0
0
0
0
0
0
0
BLUETOOTH
CD
OPT1
OPT2
LINE 1
LINE2
LINE 3
TUNER
NET
USB
BAND
@1--.;....t
COAX2
MEMORY
~>
>
~
®
SPEAKERS AlB
Turns on and off the set of speakers connected to the SPEAKERS
A and/or SPEAKERS B terminals on the rear panel of this unit
when the corresponding key is pressed.
@ Input selection keys
Select an input source for playback.
PHONO
PHONO jacks
COAX 1/2
COAXIAL1/2jacks
BLUE TOOTH Bluetooth connection
OPTICAL 1/2 jacks
OPT 112
CD
CD jacks
LINE 1-3 jacks
LINE 1-3
TUNER
FM/AM tuner
Network source (press repeatedly to select a
NET
desired network source)
USB
USB jack (on the front panel)
@) Radio keys
Operate the FM/AM radio (p. 24).
BAND
Switches between FM and AM.
TUNING<<J> Selects the radio frequency.
>
®
Preset keys
MEMORY
PRESET(})
REPEAT
111----:-t
[> I 0 0
SHUFFLE
0 0 0
0 0 0
f<l<ll<l<l
D
<>r>/1>!>1
@YAMAHA
®
Registers the current FM/AM station as a
preset when TUNER is selected as the input
source (p. 25).
Registers the current playback song or
streaming station as a preset when NET, USB
(except iPod) are selected as the input source
(p.41).
Recalls a preset FM/AM station (p. 26) or
song/streaming station (p. 41 ).
Menu operation keys
Cursor keys
Select a menu or a parameter.
(D..IV !<Ill>)
ENTER
RETURN
0
Confirms a selected item.
Returns to the previous state.
HOME
Moves up top level when selecting music files, folders, etc.
@
SETUP
Displays the "Setup" menu (p. 43).
®
NOW PLAYING
Displays music information when selecting music files, folders,
etc.
@ VOLUME+/Adjust the volume.
®
Playback keys
Let you play back and perform other operations for network
sources, Bluetooth devices and USB devices.
9
En
Controls and functions
@
~(power)
Turns on/off (standby) the unit.
@ SLEEP
SPEAKERS
0----0
PHONO
SLEEP
0--+---@
0
COAX1
0--+------©
I
COAX2
OPT2
@ OPTION
Displays the "Option" menu (p. 42).
BLUETOOTH
0 0 0
OPT1
Sets the sleep timer (p. 23).
CD
0 0 0
0 0 0
0 0 0
0 ~>
0 ~>
LINE1
liNE 2
LINE3
TUNER
NET
USB
@ MUTE
Mutes the audio output.
•
Installing batteries
BAND
MEMORY
RETURN
HOME
S:e~
VOLUME~
N~cre~
• Change all batteries if the operation range of the remote control
narrows.
• Be fore inserting new batteries, wipe the compartment c lean.
0
REPEAT
[> I
[] []
•
Operation range
The remote controls transmit a directional infrared beam.
Be sure to aim the remote controls directly at the remote
control sensor on the front panel of this unit.
SHUFFLE
0 0 0
0 0 0
I<J<J/<KJ
D
t>e>/~
@YAMAHA
Approximately
6 m (20ft)
o-oo
0
0
coo
coo
coo
~~
@ Remote control
gog
o0 o
coo
coo
10 En
Connections
CAUTION
Do not connect this unit or other components to the main power until all connections between components are complete.
• All connections must be correct: L (left) to L, R (right) toR,"+" to"+" and"-" to"-". If the connections are faulty,
no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be
unnatural and lack bass. Refer to the owner's manual for each of your components.
Do not let bare speaker wires touch each other or any metal part of this unit. This could damage this unit and/or the speakers.
• Make sure to use RCA cables, optical cables to connect audio components.
DVD player, etc.
Turntable
CD player, etc.
tfllGND
1·-·-·-·-·
CD recorder, etc.
CD player
Subwoofer
Speakers A
Speakers B
Only PCM signals can be input to the digital (OPTICAL/COAXIAL) jacks of this unit.
• The PHONO jacks are designed for connecting a turntable with an MM cartridge.
• Connect your turntable to the GND terminal to reduce noise in the signal. However, for some turntables, you may hear less noise
without the GND connection.
In order to prevent the audio signal from looping when an audio recording device is connected, the audio signal is not output from the
LINE 2 (OUT) jacks when LINE 2 is selected. Similarly, the audio signal is not output from the LINE 3 (OUT) jacks when LINE 3 is
selected.
11
En
·n
Bi-wire connection
•
•
Connecting speaker cables
Speaker cables have two wires. One is for connecting the
negative(-) terminal of the unit and the speaker, and the
other is for the positive (+) terminal. If the wires are
colored to prevent confusion, connect the black wire to the
negative and the other wire to the positive terminal.
CD Remove approximately I0 mm (3/8") of insulation from the ends of
Bi-wire connection separates the woofer from the
combined midrange and tweeter section. A bi-wire
compatible speaker has four binding post terminals. These
two sets of terminals allow the speaker to be split into two
independent sections. With these connections, the mid and
high frequency drivers are connected to one set of terminals
and the low frequency driver to another set of terminals.
This unit
the speaker cable and twist the bare wires of the cable firml y together.
+
@ Loosen the speaker terminal.
~A
@ Insert the bare wires of the cable into the gap on the side (upper
right or bottom left) of the terminal.
Speaker
@[email protected]
@Tighten the terminal.
CD
®
J/10 mm
(3/8")
Connect the other speaker to the other set of terminals in
the same way.
•
Connecting via banana plug
Tighten the knob and then insert the banana plug into the
end of the corresponding terminal.
tlfif/!:;
Y
When making bi-wire connections, remove the shorting bridges
or cables on the speaker. Refer to the speakers' instruction
manuals for more information.
,,,
:<j)<.
To use the bi-wire connections, press SPEAKERS A and
SPEAKERS Bon the front panel or on the remote control so that
both speaker indicators (" A" and "B") light up on the front
display.
SPEAKERS AlB
SPEAKERS AlB
12 En
Connections
The antennas for receiving FM and AM broadcasts are included with this unit. In general, these antennas should provide
sufficient signal strength. Connect each antenna correctly to the designated terminals.
If you experience poor reception quality, install an outdoor antenna. Consult the nearest authorized Yamaha dealer or service center
about outdoor antennas.
FM antenna
(included)
or
Outdoor
FM antenna
0
AM antenna (included)
• The AM antenna should always be connected. even if an outdoor
AM antenna is connected to this unit.
• The AM antenna should be placed away from this unit.
Outdoor AM antenna
Use 5 to 10m of vinyl-covered wire extended
outdoors from a window.
•
Assembling the supplied AM antenna
•
Connecting the wires of the AM antenna
1
Hold down
13
En
Connections
Connect the unit to your router with a commercially-available STP network cable (CAT-5 or higher straight cable).
,·:tsniiectrng power cable
'·
If you connect the unit wirelessly, erect the wireless
antenna. For information on how to connect the unit to a
wireless network, see "Connecting to network" (p. 15).
. . .....
" !; ,'(:::··
- ~-
'
'
'
Atter all the connections are complete, plug in the power
cable.
+
Note
Do not apply excessive Ioree on the wireless antenna. Doing so
may damage the antenna.
14 En
To an AC wall outlet
Connecting to network
There are several methods to connect the unit to a network. Select a connection method according to your environment.
;N,~t~i"
• Some security software installed on your PC or the firewall settings of network devices (such as a router) may block the access of the
unit to the network devices or the Internet. In these cases, configure the security software or firewall settings appropriately.
• Each server must be connected to the same subnet as the unit.
• To use the service via the Internet, broadband connection is strongly recommended.
When playing a high-resolution audio source via the network, we recommend connecting with a wired router for stable playback"
•
Connecting with the MusicCast CONTROLLER app
See MusicCast Setup Guide for detail s"
•
Connecting with the wired router
Connecting using the DHCP server function of the
router
•
You can connect to the network by
simply making a wired connection
(p. 14)
Connecting with a wireless router (access point)
Connect to the network with the method listed below that corresponds to your environment.
•
Connecting using the Wi-Fi setting of the iOS
device (iPhone I iPod touch)
Share the Wi-Fi setting of the iOS
device (p. 16)
Connecting using WPS push button configuration
on the wireless router (or access point)
Use the WPS push button
configuration (p. 17)
Connecting with a wireless router (access point)
without WPS push button configuration
Set the network connection
manually (p. 18)
Connecting without a wired router or wireless router (access point)
Connecting wirelessly to a mobile device
(Wireless Direct)
Connect wirelessly with Wireless
Direct (p. 19)
When the unit is connected to the network with Wire less Direct, it cannot connect to any other wireless router (access point). To play
back contents from the Internet, connect th is unit to a network with a wired router or wireless router (access point).
15
En
Connecting to network
6
You can easily setup a wireless connection by applying the
connection settings on iOS devices (iPhone/iPod touch).
Before proceeding, confirm that your iOS device is
connected to a wireless router (access point).
If the network connection is not set, when you tum on
this unit, "WAC" (Wireless Accessory Configuration)
appears on the front display, and search automatically
iOS device. You can automatically share the network
settings.
Use the cursor keys (.0. I 'V) to select "Share
Setting" and press ENTER.
1=1Hi~ll=-;1
[
:; ;:!.:.! :i. !"'' ::::·
7
!:·
Use the cursor keys {.0. I 'V) to select the
desired connection method and press
ENTER.
The following connection methods are available.
You can apply the connection settings on the iOS
device to the unit using a wireless connection. For
details, see "Sharing the iOS device setting
wirelessly". (You need iOS device with iOS 7 or
later.)
Wireless
(WAC)
If the unit is already wire connected and also
connected to a wireless network by another method,
settings will not be shared automatically. To manually
share the iOS device network settings, perform the
following operation.
J: : · : : . : : . <i.d !:::! c: : :
You can apply the connection settings on the iOS
device to the unit using a USB cable. For details, see
"Sharing the iOS device setting using a USB cable".
(You need iOS device with iOS 5 or later.)
USB
Cable
When you select "Wireless (WAC)" as the connection method, all
network settings are initialized.
Cursor keys 6 I 'V
•
ENTER
RETURN
SETUP
1
1
Press <!> to turn on this unit.
2
Press SETUP.
3
Use the cursor keys (.0.1 'V) to select
"Network" and press ENTER.
Sharing the iOS device setting wirelessly
If you select "Wireless (WAC)" as the connection method,
perform the network setting sharing operation on your iOS
device. (The following procedure is a setup example for
iOS 8.)
On the iOS device, select the unit as the
AirPlay speaker in the Wi-Fi screen.
Wi··Fi
Other...
,o,
~"'~
To return to the previous state, press RETURN.
4
Use the cursor keys (.0.1 v) to select
"Connection" and press ENTER.
5
Use the cursor keys (.0. I v) to select
"Wireless" and press ENTER.
2
Check the network currently selected and tap
"Next".
AirPlay Setup
This AirPiii\"
~peakic
will 00 set up \o ioin "XXXXX"
~
Show Other Networks.,.
Speaker Name
16
En
~Tap here to start setup
The network currently
selected
Connecting to network
When the sharing process finishes, the unit is
automatically connected to the selected network
(access point).
When the setting finishes, verify whether the unit is
connected to a wireless network (p. 20).
•
Sharing the iOS device setting using a
USB cable
If you select "USB Cable" as the connection method,
follow the procedure below to share the iOS device setting
with the unit.
1
Connect the iOS device to the USB jack, and
disable the screen lock on the iOS device.
This unit (front)
2
Press ENTER.
3
Tap "Allow" in the message appeared on the
iOS device.
When the connection process finishes, "Completed"
appears on the front display.
When the setting finishes, verify whether the unit is
connected to a wireless network (p. 20).
4
To exit from the menu, press SETUP.
1
Press <!> to turn on this unit.
2
Press SETUP.
3
Use the cursor keys (.6. I 'V') to select
"Network" and press ENTER.
,,,
;:<i>~
To return to the previous state, press RETURN.
4
Use the cursor keys (.6./ 'V') to select
"Connection" and press ENTER.
5
Use the cursor keys (.6./ 'V') to select
"Wireless" and press ENTER.
6
Press ENTER twice.
"Connecting" appears on the front display.
7
Push the WPS button on the wireless router
(access point).
When the connection process finishes, "Completed"
appears on the front display. When the setting
finishes, verify whether the unit is connected to a
wireless network (p. 20).
If"Not connected" appears, repeat from Step 1 or try
another connection method.
8
To exit from the menu, press SETUP.
About WPS
You can easily set up a wireless connection with one push
of the WPS button.
WPS (Wi-Fi Protected Setup) is a standard established by the
Wi-Fi Alliance, which allows easy establishment of a
wireless home network.
This configuration does not work if the security method of your
wireless router (access point) is WEP. In this case, use other
connection method.
v
ENTER
Cursor keys t:,./
RETURN
SETUP
17 En
Connecting to network
9
Use the cursor keys (.6. I v) to select
"Security" and press ENTER.
10
Use the cursor keys (<Ill>) to select desired
security method and press RETURN.
Before performing the following procedure, check the
security method and security key on the wireless router
(access point).
Cursor keys
6/V/<1/f>
Settings
None, WEP, WPA2-PSK (AES), Mixed Mode
ENTER
RETURN
SETUP
1
Press <9 to turn on this unit.
2
Press SETUP.
3
Use the cursor keys (.6. I V) to select
"Network " and press ENTER.
,,,
~<fl<.
If you select "None", the connection may be insecure since the
communication is not encrypted.
11
Use the cursor keys (.6. I V) to select
"Security Key" and press ENTER.
12
Use the cursor keys to enter the security key
on the wireless router (access point), and
press RETURN to previous state.
Use the cursor keys (<Ill>) to move the edit position
and the cursor keys (.6./\7) to select a character.
You can insert I delete a character, by pressing
PRESET) (insert) or PRESET< (delete).
13
Use the cursor keys (.6. I V) to select
"Connect[ENTER]" and press ENTER to save
the setting.
If"ERROR" appears, check the SSID and security
key on the wireless router (access point) and repeat
from Step 7.
If"ERROR" not appears, a connection is success .
Verify whether the unit is connected to a wireless
network (p. 20).
14
To exit from the menu, press SETUP.
To return to the previous state. press RETURN.
4
Use the cursor keys (.6. I V) to select
"Connection" and press ENTER.
5
Use the cursor keys (.6. I v) to select
"Wireless" and press ENTER.
6
Use the cursor keys (.6.1 v) to select "Manual
Setting" and press ENTER.
:·~::=:r,:u:=::_
.:::. =:::· ::::· T r\
""'
·:·
7
: : : : ..·
.............
Use the cursor keys (.6. I v) to select "SSID"
and press ENTER.
8
Use the cursor keys to enter the SSID on the
wireless router (access point), and press
RETURN to previous state.
Use the cursor keys ( <1/1>) to move the edit position
and the cursor keys (.6./\7) to select a character.
18
En
Connecting to network
·:Cimtilffijijj!IIIDOtiJie'&JViCI{Jil"ifiii,
8
,,~~4·,
Using Wireless Direct, this unit can operate as a wireless
network access point that mobile devices can directly
connect to.
Use the cursor keys (<lll>) to select desired
security method and press RETURN.
Settings
None, WPA2-PSK (AES)
1ii!te
If you select "None", the connection may be insecure since the
communication is not encrypted.
Cursor keys
t:,./\li<Jir>
9
Use the cursor keys (ll. I \7) to select
"Security Key" and press ENTER.
10
Use the cursor keys to enter the security key
on this unit, and press RETURN to previous
state.
Use the cursor keys ( <l I I>) to move the edit position
and the cursor keys (ll. I \7) to select a character.
You can insert I delete a character, by pressing
PRESET) (insert) or PRESET< (delete).
11
Use the cursor keys (ll. I \7) to select
"Connect[Enter]" and press ENTER to save
the setting.
The SSID and security key information is required
for setup of a mobile device.
When you select the "SSID" in step 6, you can check
the configured SSID on this unit. The SSID of this
unit can be change by using cursor keys (ll. I \7 I <l I
ENTER
RETURN
SETUP
When the unit is connected to the network with Wireless Direct, it
cannot connect to any other wireless router (access point). To
play back contents from the Internet, connect this unit to a
network with a wired router or wireless router (access point).
1
Press <!) to turn on this unit.
2
Press SETUP.
3
Use the cursor keys (ll. I 'V) to select
"Network" and press ENTER.
,,,
~"' ~
To return to the previous state, press RETURN.
4
Use the cursor keys (ll. I \7) to select
"Connection" and press ENTER.
5
Use the cursor keys (ll.l \7) to select
"WirelesDirect" and press ENTER.
I>).
12
TITI-II_I_T
II
1111 I .LI l. I"' C.: I_ I
::: ~:::; ~:::; I L::
6
1
(I) Enable the Wi-Fi function on the mobile device.
(2) Select the SSID of this unit from the list of
available access points.
(3) When you are prompted for a password, enter the
security key displayed in Step I 0.
!i·
Press ENTER to check the SSID on this unit,
and press RETURN to previous state.
lf"ERROR" appears, check the security key on this
unit and repeat Step 12.
[f "ERROR" not appears, a connection is success.
Verify whether the unit is connected to a wireless
network (p. 20).
Use the cursor keys (ll.l \7) to select
"Security" and press ENTER.
T\TCICI- T
II
IIIII l.I .L I•I_ I_ I
•
·li
.
....
...
• ••
•........
.
l.:J i. .:i···i :::::..... i···:::::: !<.
.........
....
0
::. i"·i i:::. ~:::: )
i:·
Configure the Wi-Fi settings of a mobile
device.
For details on settings of your mobile device, refer to
the instruction manual of the mobile device.
13
To exit from the menu, press SETUP.
19
En
Connecting to network
Perform the following procedure to verify the unit's
connection to a network.
Cursor keys !:;,./ \1
ENTER
RETURN
SETUP
1
Press SETUP.
2
Use the cursor keys (.6. I V) to select
"Network" and press ENTER.
,,,
~<i>~
To return to the previous state, press RETURN.
3
Use the cursor keys (6./ V) to select
"Information" and press ENTER.
4
Use the cursor keys (6./ V} to select
"STATUS".
1=1
T1-:1TU1=1
.:::. :''', ,"',:.... :.··.......... ·i..
·:::· :.... :...:: :: :::::· :.... :,,.
When "Connect" appears, the unit is connected to a
network. If"Disconnect" appears, reset connection.
5
To exit from the menu, press SETUP.
20
En
Playback
<'>(power)
4
Play the source.
5
Rotate the VOLUME control on the front
panel (or press VOLUME+/- on the remote
control) to adjust the sound output level.
,,,
~"'~
You can adjust the tonal quality by using the BASS, TREBLE,
BALANCE and LOUDNESS controls or the PURE DIRECT
switch on the front panel.
INPUT selector
SPEAKERS AlB
6
When you finish using, press <9 (Power) on
the front panel to turn off the power.
When you press <9 (Power) on the remote control,
this unit set to standby mode.
•
Enjoying pure high fidelity sound
(Pure Direct)
<'>(power)
Input selection
keys
When the PURE DIRECT switch is turned on, routes
input signals from your audio sources so that the input
signals bypass the BASS, TREBLE, BALANCE and
LOUDNESS controls, thus eliminating any alterations to
the audio signals and creating the purest possible sound.
The PURE DIRECT indicator lights up and the front
display turns off after a few seconds.
VOLUME
PURE DIRECT switch
1
Press <9 (power) to turn on this unit.
2
Rotate the INPUT selector on the front panel
(or press one of the input selection keys on
the remote control) to select the input source
you want to listen to.
3
Press SPEAKERS A and/or SPEAKERS B on
the front panel or on the remote control to
select speakers A and/or speakers B.
When speaker set A or speaker set B are turned on,
"A" or "B" is displayed on the front display
accordingly (p. 7).
• When the PURE DIRECT switch is turned on, the front display
turns off.
• The BASS, TREBLE, BALANCE, and LOUDNESS controls do
not function while the PURE DIRECT switch is turned on.
• When one set of speakers is connected using hi-wire connections,
or when using two sets of speakers simultaneously (A and B),
make sure "A" and "B" are displayed on the front display.
• When listening with headphones, tum off the speakers.
21
En
Playback
•
Adjusting the BASS and TREBLE
•
Adjusting the LOUDNESS control
controls
The BASS and TREBLE controls adjust high and low
frequency response.
The center position produces a flat response.
BASS control
When you feel there is not enough bass (low frequency
sound), rotate clockwise to boost. When you feel there is
too much bass, rotate counterclockwise to suppress.
Control range: - I 0 dB to + I 0 dB (20 Hz)
TREBLE control
When you feel there is not enough treble (high frequency
sound), rotate clockwise to boost. When you feel there is
too much treble, rotate counterclockwise to suppress.
Control range: - 10 dB to+ I 0 dB (20kHz)
em)
•
VOLUME +1-
Retain a full tonal range at any volume level , thus
compensating for the human ears' loss of sensiti vity to
high and low-frequency ranges at low volume.
CAUTION
If the PURE DIRECT switch is turned on with the
LOUDNESS control set at a certain level, the input signals
bypass the LOUDNESS control, resulting in a sudden
increase in the sound output level. To prevent your ears or
the speakers from being damaged, be sure to press the
PURE DIRECT switch after lowering the sound output
level or after checking that the LOUDN ESS control is
properly set.
1
Set the LOUDNESS control to the FLAT
position.
2
Rotate the VOLUME control on the front
panel (or press VOLUME+/- on the remote
control) to set the sound output level to the
loudest listening level that you would listen
to.
3
Rotate the LOUDNESS control until the
desired volume is obtained.
Adjusting the BALANCE control
The BALANCE control adjusts the sound output balance
of the left and right speakers to compensate for sound
imbalance caused by speaker locations or listening room
conditions.
,,,
~<il-=-
After setting the LOUDNESS control, enj oy listening to music at
your preferred volume level. If the etfect of the LOUDNESS
control setting is too strong or weak, readjust the LOUDNESS
control.
22 En
Playback
Use this feature to automatically set this unit to standby
mode after a certain amount of time. The sleep timer is
useful when you are going to sleep while this unit is
playing or recording a source.
<'.l (power)
SLEEP
The sleep timer can only be set with the remote control.
1
Press SLEEP repeatedly to set the amount of
time before this unit is set to standby mode.
Each time you press SLEEP, the front display
changes as shown below.
The SLEEP indicator blinks while setting the amount
oftime for the sleep timer.
If the sleep timer is set, the SLEEP indicator on the
front display lights up.
,,,
~"'~
• To disable the sleep timer, select "Sleep Off'.
• The sleep timer setting can also be canceled by pressing
<'.l (power) to set this unit to standby mode.
23
En
Listening to FM/AM radio
•
Improving FM reception (FM mode)
If the signal from the station is weak and the sound quality
is not good, set the FM band reception mode to monaural
mode to improve reception.
TUNER
TUNING
BAND
«I»
1
1
Press TUNER to select "TUNER" as the input
source.
2
Press BAND repeatedly to select the
reception band (FM or AM).
3
«I»
Press and hold TUNING
for more than
1 second to begin tuning.
Press ) ) to tune in to a higher frequency.
Press <<to tune in to a lower frequency.
The frequency of the received station is shown in the
front display.
If a broadcast is being received, "TUNED" indicator
on the front display will be lit. If a stereo broadcast is
being received, the "STEREO" indicator will also lit.
Frequency
.::\~'-=-
• If the station signals are weak, tuning search does not stop at the
desired station.
• When the signal reception for an FM radio station is unstable,
switching to monaural may improve it.
24
En
Press MODE repeatedly to select "Stereo"
(automatic stereo mode) or "Mono"
(monaural mode) when this unit is tuned in to
an FM radio station.
When Mono is selected, FM broadcasts will be heard
in monaural sound.
The STEREO indicator on the front panel lights up while
listening to a station in stereo mode.
You can use the automatic preset tuning function to
automatically register FM stations as presets. This
function enables this unit to automatically tune in to FM
stations that have a strong signal and register up to 40 of
those stations in order. You can then easily recall any
preset station by selecting its preset number.
• If a station is registered to a preset number that already has a
station registered to it, the previously registered station is
overwritten.
• If the station you want to register is weak in signal strength, try
using the manual preset tuning method .
,,,
~ljl~
FM stations registered as presets using the automatic preset
registration feature will be heard in stereo.
Listening to FM/AM radio
TUNER
BAND
PRESET
<I >
Select a radio station manually and register it to a preset
number. You can then easily recall any preset station by
selecting its preset number.
Cursor keys t:, I v
ENTER
PRESET
MEMORY
<t>
RETURN
OPTION
1
Press TUNER to select "TUNER" as the input
source.
1
Follow "FM/AM tuning" (p.24) to tune into the
desired radio station.
2
Press OPTION on the remote control.
The "Option" menu is displayed (p. 42).
2
3
Press b. I 'V to select "Auto Preset", and then
press ENTER.
Hold down MEMORY for more than 2 seconds.
The first time that you do register a station, the selected
radio station will be registered to the preset number
"01 ". Thereafter, each radio station you select will be
registered to the next empty (unused) preset number
after the most recently registered number.
1- 1 1- 1 T T 1- 1 11 I
U f " I l. U I 1!
vm-
- ,-, -,
:1/_l ds
:;;::!:::!!.A'i::.::::; F=!'""·;:::=::::.;:::='i::.
Preset number
,,,
.:O (j)-:.
Preset number
Frequency
This unit starts scanning the FM band about 5
seconds later from the lowest frequency upwards.
To begin scanning immediately, hold down ENTER.
To select a preset number for registering, press MEMORY once
after tuning into the desired rad io station, press PRESET<
to
select a preset number, and then press MEMORY again.
I>
,-, ,-, ,-
. "' . '
... :J... CJ •:J.....
·L··i
...·.:..... :....::::
.:-'cj{-:.
I
• Before scanning begins, you can specify the first preset number
to be used by pressing PRESET < or cursor key (t:,.l\1) on the
remote control.
• To cancel scanning, press BAN D or RETU RN.
I>
• •:
::
; ...
:':':
: : :: -
.
.~
·..· ...·
..
-,-, :
'
""- :11_1 "8
: • •• :
" Empty" (not in use) or the frequency currently registered
When scanning is complete, "FINISH" is di splayed and
then the display returns to original state.
25 En
Listening to FM/AM radio
3
You can recall preset stations that were registered using
automatic station preset or manual station preset.
Use the cursor keys to select "Clear Preset"
and press ENTER.
-,,-, -
1-11-1 T T I-ll• I
1_1 r- 1 .1. Ll ' ' I
vuL - ="-'dB
:::::C: :!. ::::= .:::1!"""· !:::·!"""·::::=::::.::::=·1::.
4
Use the cursor keys (.6. I 'V) to select a preset
station to be cleared and press ENTER.
TUNER
Preset station to be cleared
PRESET(/)
If the preset station is cleared, "Cleared" appears and
then the next in-use preset number is displayed.
1- I
1
2
Press TUNER to select "TUNER" as the input
source.
Press PRESET
number.
<I >to select a preset
~'¥-:.
• Preset numbers to which no stations are registered are skipped.
• "No Presets" is displayed if no stations are registered.
C:: 1- 1 CJ
I_ I_ ,--,I'
... .
: ..: ·:
I_
::
... ..
: . : .....
- 11-1 '
.
"', :........:
::..: .!. :: :.....:. ::::·-:::::
•ot -
=ll_lds
:...:
5
Repeat step 4 until all desired preset stations
are cleared.
6
To exit from the "Option" menu, press
OPTION.
,,,
~til~
Clear radio stations registered to the preset numbers.
TUNER
Cursor keys !',. / v -~V!id
ENTER
OPTION
1
Press TUNER to select "TUNER" as the input
source.
2
Press OPTION.
26
En
You can clear a preset station from the front panel.
(I) Press CLEAR on the front panel.
(2) Press PRESET <1/1> to select the preset station that you want
to clear.
(3) Press SELECT/ENTER or CLEAR to clear the preset station.
Playing back music via 8/uetooth
You can play back music files stored on a Blue tooth
device (such as mobile device) on the unit.
Please also refer to the owner's manual of your Bluetooth
device.
3
After pairing has been completed and the unit is
connected to the Bluetooth device, "Connected"
appears on the front display, and Bluetooth indicator
will be light up.
((<
This unit
On the Bluetooth device, select the unit's
model name from the available device list.
Ti I
Bluetooth device
(such as mobile device)
I I 1- T 1-1 1-1 T U
I Ll U I I I
.fl I_ L1 C
f
'm-
-,-, , '
_:11_1 dB
c:: : : : !""·~ r·~ =:::= ::::. ·~::. ::::: ::::~
,,,
• To use the Bluetooth function, set "Biuetooth" (p. 45) in the
"Setup" menu to "On".
• A Bluetooth device may not be detected by the unit or some
feature may not be compatible, depending on the model.
,,,
~"'~
o If the pass key is required, enter the number "0000".
• Complete a pairing procedure within 5 minutes.
o If no Bluetooth devices are found, "Not found" appears.
~"'~
You can transmit audio to Bluetooth speakers or headphones
using the MusicCast CONTROLLER app. To transmit audio, set
"Audio Send" (p. 45) in the "Setup" menu to "On". The audio
output can only be selected from the MusicCast CONTROLLER
app.
Connect a paired Bluetooth device and start playback.
Check the following beforehand:
• Pairing has been completed.
• Bluetooth function on the Bluetooth device is turned on.
When connecting a Bluetooth device to the unit for the
first time, the pairing operation is required to perform.
Pairing is an operation that registers the Blue tooth devices
with each other beforehand. Once pairing has been
completed, subsequent reconnection will be easy even
after the Bluetooth connection is disconnected.
BLUETOOTH
Playback keys
BLUETOOTH
1
1
Press BLUETOOTH to select "Biuetooth" as
the input source.
If another Bluetooth device is already connected,
disconnect the Bluetooth connection before you
perform a pairing operation.
2
Press BLUETOOTH to select "Biuetooth" as
the input source.
~'¥~
If the unit detects the Bluetooth device previously connected, the
unit automatically connects to the Bluetooth device after Step I.
To establish another Bluetooth connection, first disconnect the
current Bluetooth connection.
Turn on the Bluetooth function of the
Bluetooth device.
27
En
Playing back music via Bluetooth
2
Operate the 8/uetooth device to establish a
8/uetooth connection.
Select the unit's model name from the Bluetooth
device list on your device.
When a connection is established, Bluetooth indicator
on the front display will be light up.
If you cannot connect the Bluetooth device, please perform
pairing again.
3
Operate the 8/uetooth device to play back
music.
,,,
~til~
You can use the playback keys on the remote control to control
playback.
Follow one of the procedures below to disconnect a
Bluetooth connection.
• Tum off the Bluetooth function on the Bluetooth
device.
• Hold down BLUE TOOTH on the remote control for at
least 3 seconds.
• Select "Disconnect" in "Audio Receive" (p. 45) in the
"Setup" menu, and then press ENTER.
• Select an input source other than "Bluetooth" on the
unit.
28
En
Playing back music stored on media servers (PCs/NAS)
You can play back music files stored on your PC or DLNA-compatible NAS on the unit.
••• •••
NAS
••
•/II..
• •
Ooo "" Orn
~
••••
• • •
···"""
rn rno oo
rn
'--T----.----------..---- r-'
This unit
PC
il itii
• To use this function, the unit and your PC/NAS must be connected to the same router (p. 14). You can check whether the network
parameters (such as the IP address) are properly assigned to the unit in "Information" (p.44) in the "Setup" menu.
• The unit supports playback of WAY (PCM format only), AIFF, MP3, WMA, MPEG-4 AAC, FLAC, ALAC and DSD files.
• The unit is compatible with sampling rates of up to 192kHz for WAY, AIFF and FLAC files, 96kHz for ALAC files, and 48kHz for
other files.
• The unit is compatible with 2.8 MHz/5.6 MHz (I bit) DSD files.
• Digital Rights Management (DRM) contents cannot be played back.
• To play back music files, the server software installed on the PC/NAS must support the music file formats that you want to play back.
,,,
~<i>~
You can connect up to 16 media servers to this unit.
3
To play back music files in your computer with this unit,
you need to make the media sharing setting between the
unit and computer (Windows Media Player 11 or later). In
here, setting with Windows Media Player in Windows 7 is
taken as an example.
Click "Turn on media streaming."
.1. _.. , _,. ,. _
Mtdr.i1t<e..,ing oii0'111!-)'00J tO•~yo..- mUI .C. P<CI.u<o:l.-.dvi:l<:<><to.otr>t• cornlkSII>I\•nd~o:~
o nyou< nt:tw<><lt.
~ ~l!.o•iioonroutor o:< ltiYtmcdia f mmoti>U <otrfW! r<S..nd
d"'ko:l
>>•.u rutn..,. rno:di. "'t'"'i"9. you c...-.:niM!«<<tk ~rat do an~ rot!:*OM ..rti~gs .,.;~ l>t rt>Oilf'".
V.,...;,..,ld ,.,.., ~~fl'odl~tl!«oomin}On~...,n-lutt..l,oo.>t<... ,\ i w<h 01
~0..... 0<
"'0''
~ ~...,;.,-w )
.
•
When using Windows Media Player 12
1
Start Windows Media Player 12 on your PC.
2
Select "Stream", then "Turn on media
streaming."
The control panel window of your PC appears.
f~ ,., .,., .,..~~'''"...t;~·J'<-""'"l
Ru<l lheF>n->O<y o;t>lom ... o'llon•
(Example of English version)
!:) Genf•
_,
SViOc:M
,,;J[ Pi<turH
.,.,
R«.o~ed~
29
En
aymg ac music stored on media servers (PCs/NAS)
4
Select "Allowed .. from the drop-down list
next to the unit's model name.
Follow the procedure below to operate the PC music
contents and start playback.
::ncos.e media stre-aming options fo· compoteJs a~ cevices
"_"( underscore) wi ll be displayed for characters not supported
by the unit.
Ag dt~t<n ott4""-d
:o=n •..o.t<llo"</ mtdJO.
:"e.>o!>cmt~O'Jl•~ d •h• ""i)OIJI<etol
:t>Go<o ~~opl.,n>
~ ~·~,. .,.,..,bo.,.,.,u,.,,.
•.,,.,,9
>o>lltf>oo ""''"·Y "•••~'""' ~~'""
Cursor keys
.6. /'V/<J/r>
ENTER
RETURN
HOME
5
Click "OK" to exit.
•
When using Windows Media Player 11
1
Start Windows Media Player 11 on your PC.
2
Select "Library" then "Media Sharing".
3
Check the "Share my media to" box, select
the unit's icon, then click "Allow".
4
Click "OK" to exit.
•
When using a PC or a NAS with other
DLNA server software installed
Refer to the instruction manual for the device or software
and configure the media sharing settings.
OPTION
NOW PLAYING
Playback keys
1
Press NET repeatedly to select "Server" as
the input source.
2
Use the cursor keys (~IV') to select a music
server and press ENTER.
3
Use the cursor keys to select an item and
press ENTER.
Jfa song is selected, playback starts and the playback
information is displayed.
1- C I- 11 '1_ 1_1
_II_~- \ 1'
r1
c
i=· ::::: ::::: ! !:;~ ~ i
00
I
!:::!
.:-'~'-:.
• If playback of a music file selected from the unit is ongoing on
your PC, the playback information is d isplayed.
• You can register the current playback song as a preset (p. 4 1).
• If you press the DISPLAY on the front panel repeatedly, you
can switch the playback information on the front display (p. 40).
30 En
Playing back music stored on media servers (PCs/NAS)
Use the following remote control keys to control
playback.
Keys
Function
Cursor keys
Select a music file or folder.
ENTER
Starts playback if pressed while
content is selected. Moves down
one level if pressed while a folder
is selected.
RETURN
Moves up one level.
r:>! [][]
Playback
keys
Stops/resumes playback.
D
Stops playback.
I<Kl/ <J<I Skips forward/backward.
[>{> f[>{>l
(while holding down) Searches
forward/backward.
HOME
Displays the root directory of the
mus1c server.
NOW PLAYING
Displays information about the
song that's playing.
,,,
~<il-=-
You can also use a DLNA-compatible Digital Media Controller
(DMC) to control playback. For details, see "DMC Control"
(p.44).
•
Repeat/shuffle settings
You can configure the repeat/shuffle settings for the
playback of PC music content.
1
When the input source is "SERVER," press
REPEAT or SHUFFLE on the playback key
repeatedly to select the playback method.
Playback
keys
REPEAT
Setting
Function
Off
Turns off the repeat function.
One
Plays back the current song
repeatedly.
All
Plays back all songs in the current
album (folder) repeatedly.
OtT
Turns otrthe shuffle function.
On
Plays back songs in the current album
(folder) in random order.
SHUFFLE
31
En
Listening to Internet radio
You can listen to Internet radio stations from all over the world.
• To use this function, the unit must be connected to the Internet
(p. 14). You can check whether the network parameters (such as
the IP address) are properly assigned to the unit in
"Information" (p.44) in the "Setup" menu.
• You may not be able to receive some Internet radio stations.
• The unit uses the vTuner Internet radio station database service.
• This service may be discontinued without notice.
2
Use the cursor keys to select an item and
press ENTER.
If an Internet radio station is selected, playback starts
and the playback information is displayed.
1•11-T
I •I
C.:
nnTITn
I·; 1--1 j.J J. 1_1
I
: : : ..:r .:::l :;::: :;::: ~:::; 'T'
!i·
Use the following remote control keys to control
playback.
NET
Keys
Cursor keys
.6./V/<J/r>
ENTER
HOME
II I I]
:;;;: !:::: ::::: ::::: k !'!'; .:::: (• k : : .
32
En
Select the Internet radio station or
category such as the genre.
ENTER
Starts playback if pressed while
an Internet radio station is
selected. Moves down one level if
pressed while a category is
selected.
RETURN
Moves up one level.
Playback keys
Press NET repeatedly to select "Net Radio"
as the input source.
The station list appears on the front display.
I'.: E: T
Cursor keys
RETURN
NOW PLAYING
1
Function
:~~ :=:
I
D
Stops playback.
HOME
Displays the top categories if
pressed during playback.
NOW PLAYING
Displays the playback
information for the Internet radio
station.
,,,
~ifl~
!i·
• You can register the current playback station as a preset (p. 41).
• If you press the DISPLAY on the front panel repeatedly, you
can switch the playback information on the front display (p. 40).
• Some information may not be available depending on the
station.
Listening to Internet radio
By registering your favorite Internet radio stations to
"Bookmarks", you can quickly access to them from the
"Bookmarks" folder in the front display.
1
Select any of Internet radio stations on the
unit.
This operation is necessary to register the radio
station for the first time.
2
Check the vTuner ID of the unit.
You can find the vTuner ID (MAC address of the
unit) in "Information" (p. 44) in the "Setup" menu.
3
Access the vTuner website
(http://yradio.vtuner.com/} with the web
browser on your PC and enter the vTuner 10.
You can switch the language.
•IIM•msll•iiiiiii•·r nil
Please enter the lD # fo<~' your UOOia PlayN (mommto anout tbe 10ft
:aI
Enter the vTuner ID in this area.
,,,
~"'~
To use this feature, you need to create your personal account.
Create your account using your e-mail address.
4
Register your favorite radio stations.
Click the "Add" icon (•+) next to the station name.
,,,
~"'~
To remove the station from the "Bookmarks" folder, select
"Bookmarks" in the Home screen, and then click the "Remove"
icon (•-) next to the station name.
33
En
Playing back iPod/iTunes music via a network (AirPlay)
The AirPlay function allows you to play back iPod/iTunes
music on the unit via network.
2
PC
On the iPod/iTunes, click (tap) the AirPlay
icon and select the unit (network name of the
unit) as the audio output device.
iTunes (example)
iPod (example)
This unit
Playback starts
To use this function, the unit and your PC or iPod must be
connected to the same router (p. 14). You can check whether the
network parameters (such as the IP address) are properly assigned
to the unit in "'Information" (p.44) in the "Setup" menu .
AirPlay works with iPhone, iPad, and iPod touch with iOS
4.3.3 or later, Mac with OS X Mountain Lion or later, and
Mac and PC with iTunes I 0.2.2 or later.
(as of August 20 15)
Follow the procedure below to play back iPod/iTunes
music contents on the unit.
1
Turn on the unit, and start iTunes on the PC
or display the playback screen on the iPod.
If the iPodliTunes recognizes the unit, the AirPlay
icon ( ~) appears .
.:-'4)-:.
For iPods using iOS 7/8, AirPlay icon is displayed in Control
Center. To access Control Center, swipe up from the bottom of
the screen .
iTunes (example)
iPod iOS6 (example)
iPod iOS7/iOSB (example)
If the icon docs not appear, check whether the unit and PC/iPod
are connected to the router properly.
34
En
Network name of the unit
3 Select a song and start playback.
The unit automatically selects "AirPlay" as the input
source and starts playback. The playback information is
displayed on the front display.
,,,
~Cjl::.
• If you press the DISPLAY on the front panel repeatedly, you
can switch the playback information on the front display (p. 40).
• You can tum on the unit automatically when starting playback
on iTunes or iPod by setting "'Standby (Network Standby)"
(p.44) in the "'Setup" menu to " On".
• You can edit the network name (the unit's name on the network)
displayed on iPodliTunes in " Network Name" (p.45) in the
"Setup" menu.
• You can adjust the unit's volume from the iPod/ iTunes during
playback.
CAUTION
When you use iPod/iTunes controls to adjust volume, the
volume may be unexpectedly loud. This could result in
damage to the unit or speakers. If the volume suddenly
increases during playback, stop playback on the iPod/
iTunes immediately.
Playing back iPod/iTunes music via a network (AirPlay)
Use the following remote control keys to control playback.
Keys
Functions
C>/DD
D
Playback
keys
Stops/resumes playback.
Stops playback.
l<l<l/ <J<]
Skips forward/backward.
1>1> /l>l>l
REPEAT
Changes the Repeat settings.
SHUFFLE
Changes the Shuft1e settings.
To control iTunes playback with the remote control of the unit,
you need to configure the iTunes preferences to enable iTunes
control from remote speakers in advance.
iTunes (example of English version)
~
F'!"e 'lmtPods, i'huoos, ,-,nil iP<>ds from S)TI~ O<Jttlmi'tic:Siy
?w..-nw~ ;;;;~-$~-"$~---;-; of!h~daM011lh~,omputet~~d'!a~
Check this box~ :;/JAilai.-.ITilOesau®GQf\tr-oi!tomfe;ooo~spe&ers
I
35
En
Playing back music stored on a USB storage device
You can play back music files stored on a USB storage device on the unit. Refer to the instruction manuals for the USB
storage device for more information.
• The unit supports USB mass storage class devices (e.g., flash memories or portable audio players) using FATI6 or FAT32 format.
• The unit supports WAY (PCM format only), AlFF, MP3, WMA, MPEG-4 AAC, FLAC, ALAC and DSD files.
• The unit is compatible with sampling rate of up to 192kHz for WAY, AlFF and FLAC files, 96kHz for ALAC files, and 48kHz for
other files.
• The unit is compatible with 2.8 MHz/5.6 MHz (I bit) DSD files.
• Do not connect devices other than USB mass storage class devices (such as USB chargers or USB hubs), PCs, card readers, an
external HOD, etc.
• USB devices with encryption cannot be used.
• Digital Rights Management (DRM) contents cannot be played back.
• Some features may not be compatible, depending on the model or manufacturer of the USB storage device.
1
Connect the USB storage device to the USB
jack.
This unit (front)
Follow the procedure below to operate the USB storage
device contents and start playback.
"_"(underscore) will be displayed for characters not supported
by the unit.
USB
Cursor keys
L":./V/<J/'1;>
USB storage device
ENTER
HOME
I I
C:: ()
-~~-~
u~~
........ ....... .......
..... ,......
............
.............. ..
.......
...... ...................
0
00
00
0
0
oo
I
0
0
tO
I
RETURN
-
~-~u~
NOW PLAYING
0
,,,
Playback keys
oCfl~
If the USB storage device contains many Jiles, it may take time to
load the them. In this case, "Loading ... " appears in the front
display.
1
• Disconnect the USB storage device from the USB jack when it
is not in use.
• Stop playback of the USB storage device before disconnect it
from the USB jack.
• You cannot connect the PC to the USB jack of the unit.
36
En
Press USB to select "USB" as the input source.
111-:- Tl
U
_I~
:::::!:::: J!)::::.:::::
_
v
:·
::Jn
_ll_ldlJ
Playing back music stored on a USB storage device
•
2
Repeat/shuffle settings
Use the cursor keys to select an item and
press ENTER.
If a song is selected, playback starts and the playback
You can configure the repeat/shuffle settings for playback
of USB storage device contents.
infonnation is displayed.
1
I I
u
C:
1:1
_1.1.1
.....
'
~:· ~ ~·"· .:::i ::::. !<
.......
:~:i: . :::
If the input source is "USB," press REPEAT
or SHUFFLE on the playback keys repeatedly
to select the playback method.
Playback
keys
~'4'-:.
• You can register the current playback song as a preset (p. 41 ).
• If you press the DISPLAY on the front panel repeatedly, you
can switch the playback information on the front display (p. 40).
REPEAT
Use the following remote control keys to control playback.
Cursor keys
Select a music file or folder.
ENTER
Starts playback if pressed while a
music tile is selected. Moves down
one level if pressed while a folder is
selected.
RETURN
Moves up one level.
l>/00
0
Function
Off
Turns off the repeat function.
One
Plays back the current song
repeatedly.
All
Plays back all songs in the current
album (folder) repeatedly.
Off
Turns off the shuffle function.
On
Plays back songs in the current album
(folder) in random order.
Function
Keys
Playback
keys
Setting
SHUFFLE
Stops/resumes playback.
Stops playback.
I<J<J I <l<J
Skips forward/backward.
1>1> /l>t>l
HOME
Displays the root directory of the
USB device.
NOW PLAYING
Displays information about the
song that's playing.
37
En
Playing back iPod music
You can play back iPod music on the unit using a USB cable supplied with the iPod.
Note
An iPod may not be detected by the unit or some features may not
be compatible, depending on the model or software version of the
iPod.
Made for
Follow the procedure below to operate the iPod contents
and start playback.
Note
• iPod touch (2nd, 3rd, 4th and 5th generation)
• iPod nano (2nd, 3rd, 4th, 5th, 6th and 7th generation)
• iPhone 6, iPhone 6 Plus, iPhonc 5s, iPhone 5c, iPhone 5,
iPhone 4S, iPhone 4, iPhone 3GS, iPhone 3G
(as of August 2015)
"_"(underscore) will be displayed for characters not supported
by the unit.
USB
Connect your iPod to the unit with the USB cable supplied
with the iPod.
1
Cursor keys
ic,./'V/<Jir>
ENTER
Connect the USB cable to the iPod.
RETURN
HOME
2
Connect the USB cable to the USB jack.
NOW PLAYING
This unit (front)
Playback keys
1
Press USB to select "USB" as the input
source.
Ill- Tl
u
.. ............................
............
.......... ....... .......
"'
0
I
II
"'
: : : ('~i) ::::. :i. ::::.
-,n :-:
I I C Ll
u~~
10
...
0
II
II
II
I
UO
I
I
101
-11-1''
val- :n_lc~8
.:J .11
--~u~
Ji·
I
0
00
U
0
011
0
....
2
lf"Standby (Network Standby)" (p.44) in the "Setup" menu is set
to "On" or "Auto", the iPod will continue to charge up to 4 hours
if the unit goes into standby mode while the iPod is charging.
Note
Use the cursor keys to select an item and
press ENTER.
If a song is selected, playback starts and the playback
information is displayed.
I I
C:: l:l
u~~
Disconnect the iPod from the USR jack when it is not in use.
.: :.. . ·::::..:...· ...r·.
.....
I
I
001
000
I
OUt
I
-ff-1,,
...
...
·!+ .:.
IIIII
00
H
~-~u~
I
,,,
O<iJ~
• If you press the DISPLAY on the front panel repeatedly, you
can switch the playback information on the tront display (p. 40).
• To operate the iPod manually to select content or control
playback, switch to the simple play mode (p. 39).
38
En
Playing back iPod music
Use the following remote control keys to control playback.
Keys
Function
Cursor keys
Select a music file, album or genre.
ENTER
Starts playback if pressed while a
music file is selected. Moves down
one level if pressed while an album
or genre is selected.
RETURN
Moves up one level.
t>/1111
Playback
keys
D
l<l<l/ <1<1
l>t> /1>1>1
HOME
Repeat/shuffle settings
You can configure the repeat/shuffle settings of your iPod.
1
If the input source is "USB," press REPEAT
or SHUFFLE on the playback keys repeatedly
to select the playback method.
Playback
keys
Stops/resumes playback.
Stops playback.
REPEAT
Skips forward/backward.
(while holding down) Searches
forward/backward.
Displays the top menu of the iPod.
NOW PLAYING
•
Displays information about the
song that's playing.
SHUFFLE
Setting
Function
Otf
Turns off the repeat function.
One
Plays back the current song
repeatedly.
All
Plays back all songs repeatedly.
Off
Turns off the shuffle function.
Songs
Albums
Plays back songs in random order.
Plays back albums in random order.
,.,
:<j)~
•
Operating the iPod itself or remote
control (simple play)
1
Press MODE on the front panel to switch to
the simple play mode.
Between the simple play mode, only the input name
is displayed on the front display. If you confirm the
playback information, see the iPod screen.
The operation or display of repeat/shuffle may differ, depending
on the type or software version of iPod used.
,,,
:<j)~
If you want to exit the simple play mode, press M ODE agai n.
2
Operate your iPod itself or the remote control
to start playback.
Use the following remote control keys to control
playback on the simple play mode.
Operational remote
control keys
Function
Cursor keys
Select an item.
ENTER
Confi rms the selection.
RETURN
Returns to the previous state.
t>/1111
Playback
keys
D
l<l<l/ <1<1
l>t> /1>1>1
Starts playback or stops playback
temporarily.
Stops playback.
Skips forward/backward.
(wh ile ho lding down) Searches
forward/backward.
39 En
Switching information on the front display
When you select a network source or USB as the input source, you can switch playback information on the front display.
DISPLAY
1
Press DISPLAY.
Each time you press the key, the displayed item
changes.
T I• II- 1-1
j_ I •I
r-
U
,................
.'
.. .... ' ............
..............
About 3 seconds later, the corresponding information
for the displayed item appears.
~-
~-
1-r l • ~- 1-1
!1 I_ ! ~
~~ l~ I\
....... ...
.................. ........'....'..
. ....
.. ..... .......
.... ... . . ......
Input source
Item
Bluetooth
Server
AirPlay
USB (include
iPod)
Track (song title), Artist (artist name),
Album (album name), Time
Net Radio
Track (song title), Album (album name),
Time, Station (station name)
40
En
Registering the current playback song/station (Preset function)
When you select network sources and USB as the input source, you can register the current playback song or streaming
station as a preset up to 40.
You can then easily recall any preset song/station by selecting its preset number.
The following input sources can be set as presets.
Server, Net Radio, USB (except iPod) and streaming services.
PRESET
MEMORY
<J>
1
Select the input source you want to recall the
preset.
2
Press PRESET
number.
3
Press ENTER to recall preset.
ENTER
1
Playback a song or streaming station you
want to register.
2
Hold down MEMORY for more than 3
seconds.
The first time that you register a song/station, the
selected song/station will be registered to the preset
number "0 I" . Thereafter, each song/station you select
will be registered to the next empty (unused) preset
number after the most recently registered number.
<I> to select a preset
:":[
r': [: :~~ ','
... . .....
.
o
0
i:::~
II
U
I
o
.L ;; t::. r~·! ~:::· ·~::. ::::i
Preset number
,,,
~ <i> ~
To select a preset number for registering, press PRESET <I>or
the cursor keys ( <1/1> ).
3
Press MEMORY again to register preset.
41
En
Configuring playback settings for different playback sources
(Option menu)
You can configure separate playback settings for different playback sources. This menu allows you to easily configure
settings during playback.
Volume Trim
•
Corrects volume differences between input sources. If you
are bothered by volume differences when switching
between input sources, use this function to correct it.
Cursor keys
,,,
1::./'V/<llr>
~<i>~
ENTER
This setting is applied separately to each input source.
RETURN
Setting range
-10.0 dB to 0.0 dB to+ I 0.0 dB (0.5 dB increments)
OPTION
Default
0.0 dB
1
Press OPTION.
.L u I 'I
'! : : :·.·. ,"',
·:::· ·•..· =...: .:. :•.·::::=:::·
u
I
.:i:. ! ~ .....
2
Signal Info
•
="-'dB
-,,-, ' ·
1-1 C::l T T 1- 1 I' I
I
VO l -
"!'' :.....; :·.·.
: : .:. :::
Displays information about audio signal.
Choices
Use the cursor keys to select an item and
press ENTER.
FORMAT
Audio format of the input signal
SAMPL
The number of samples per second of the input
digital signal
,,,
,,,
~<i>~
~<i>~
To return to the prev ious state during menu operations, press
RETURN .
To switch the information on the front display, press the cursor
keys (.6. I \1) repeatedly.
3
Use the cursor keys ( <J/ t>) to select a setting.
4
To exit from the menu, press OPTION.
Vol.lnterlock (Volume interlock)
•
Enables/disables volume controls from iTunes/iPod via
AirPlay.
Settings
,,,
~<i>~
Off
Disables volume controls from iTunes/iPod.
Ltd
(default)
Enables volume controls from iTunes!iPod within
the limited range ( -80.0 dB to -20.0 dB and mute).
Full
Enables volume controls from iTunes/iPod in the
full range (-80.0 dB to + 16.5 dB and mute).
Available items vary depending on the se lected input source.
Item
Function
Page
Volume Trim
Corrects vol ume differences between
input sources.
42
Signal Info
Displays in formation about the audio
signal.
42
Auto Preset
Automatically registers FM radio
stati ons with strong signals as presets.
24
Clear Preset
C lear radio stations registered to preset
numbers.
26
Enables/Disables vol ume controls from
Vol.lnterlock
(Volume interlock) iTunes/iPod via AirPlay.
42
42
En
Configuring various functions (Setup menu)
You can configure the unit's various functions.
Menu item
Cursor keys
b./'V/<JI'V
ENTER
Selects the network
connection method.
44
Information
Displays the network
information on the unit.
44
IP Address
Configures the network
parameters (such as IP
address).
44
DMC
Control
Selects whether to allow a
DLNA-compatible Digital
Media Controller (DMC) to
control playback.
44
Standby
(Network
Standby)
Selects whether to enable/
disable the fu nction that turns
on the unit from other
network devices.
44
Network
Name
Edits the network name (the
unit's name on the network)
displayed on other network
dev ices.
45
Update
(Network
Update)
Updates the firmware via the
network.
45
On/Off
Enables/disables the
8/uetooth functions.
45
Standby
(8/uetooth
Standby)
Selects whether to enable/
disable the function that turns
on the unit from 8/uetooth
devices (8/uetooth standby).
45
Audio
Receive
Receives audio settings from
the 8/uetooth device.
45
Audio Send
Transmit audio fr om the unit
to 8/uetooth speakers or
headphones.
45
Max Volume
Sets the maximum volume to
prevent excessive loudness.
46
Initial Volume
Sets the initial volume for
when this receiver is turned
on.
46
AutoPowerStdby
(Auto Power Standby)
Sets the amount of time for
the auto standby function .
46
ECO Mode
Enables/di sables the eco
mode (power saving mode).
46
Press SETUP.
~~~ ~~
I
I
TUF:'
I
oloo
I
·:::· ~ ··i ::::: :..· !·=·i =. ..: r ·i·:.
:.
2
:
0 11
0
I
110
Ill:
0
I
!!·
Network
Use the cursor keys (.6./ V) to select a menu.
C C T l iD
I U I
_j I_
.:::. h·~ .... ·..·
~
·~
.:. ::...:: :::·.·:......
::::·
Press ENTER.
1111 11 II
I I I--I "
'
·!!
4
i .....
·...·:...:
·:::· : : ·:::: .....
3
I' I-ll
.. '' .....UL.....
·+· :t l:::: ::
~:::: ::::~ i:::~
Use the cursor keys ( <J/ t>) to select a setting
and press ENTER.
Bluetooth
,,,
~"'-:.
To return to the pre vious state during menu operations, press
R ETURN .
5
Page
Connection
RETURN
1
Function
Exit from the menu, press SETUP.
43
En
Configuring various functions (Setup menu)
2
Configures the network settings.
Connection
•
Selects the network connection method.
Wired
Select this option when you want to connect
the unit to a network with a commerciallyavailable network cable (p. 15).
Wireless
Select this option when you want to connect
the unit to a network via the wireless router or
access point (p. 16, 17, 18).
WirelessDirect
Select this option when you want to connect a
mobile device to the unit directly. For details
on settings, see "Connecting a mobile device
to the unit directly (Wireless Direct)" (p. 19).
Extend
Displays connection method of the MusicCast
Network.
Appears if an update for this unit 's firmware is
available (p. 49).
STATUS
The connection status of the network.
MCNET
Status of the MusicCast Network. lf " Ready"
appears, you can use the MusicCast
CONTROLLER app.
MAC
Displays MAC address of the unit. MAC
address will vary depending on the connection
method (wired LAN connection or wireless
LAN I Wireless Direct connection).
SSID
(When using wireless LAN connection or
Wireless Direct) The SSID of this unit on the
wireless network.
IP
IP address
SUBNET
Subnet mask
GATEWAY
The lP address of the default gateway
DNS P
The lP address of the primary DNS server
DNSS
The IP address of the secondary DNS server
VTUNER
The ID of the Internet radio (vTuner)
SUB NET
Specifies a subnet mask.
GATEWAY
Specifies the IP address of the default gateway.
DNSP
Specifies the IP address of the primary DNS
server.
DNSS
Specifies the IP address of the secondary DNS
server.
3
DHCP
Select whether to use a DHCP server.
Off
Does not use a DHCP server. Configure the
network parameters manually. For details, see
"Manual network settings".
On (default)
Uses a DHCP server to automatically obtain the
unit's network parameters (such as IP address).
Manual network settings
1
Set "DHCP" to "Off".
44 En
Use the cursor keys ( <l/ t>) to select the edit
position.
I' II- T I 11-11-1 1'
1111::_
i
jllji_IJ~ 11
~~Rddressi==
=
192~
(Example: IP address setting)
Use the cursor keys (<l I t>) to switch between
segments (Address! , Address2 ... ) of the address.
4
Use the Cursor keys
value.
5
To exit from the menu, press SETUP.
•
DMC Control
(~
I 'i7) to change a
Selects whether to allow DLNA-compatible Digital Media
Controller (DMC) to control playback.
Disable
Does not allow DMCs to control playback.
Enable
(default)
Allows DMCs to control playback.
,,,
~"'~
A Digital Media Controller (DMC) is a device that can control
other network devices through the network. When this function is
enabled, you can contro l playback of the unit from DMCs (such
as Windows Media Player 12) on the same network.
Standby (Network Standby)
•
IP Address
•
Configures the network parameters (such as IP address).
I 'i7) to select a
Specifies an lP address.
Displays the network information on the unit.
NewFwAvailable
(~
IP
Information
•
Use the cursor keys
parameter type.
Selects whether the unit can be turned on from other
network devices (network standby).
Off
Disables the network standby function.
On
Enables the network standby function. (The unit
consumes more power than when " Off' is
selected.)
Auto
(Default)
Enables the network standby function .
The unit is set to the power saving mode when the
unit is disconnected from the network.
Configuring various functions (Setup menu)
Network Name
•
Edits the network name (the unit's name on the network)
displayed on other network devices.
Configures the Bluetooth settings.
1
•
Select "Network Name".
On/Off
Enables/disables the Bluetooth function (p. 27).
i'-i [ T l"i I] F I<
1
: : : l'··l : : :·~::. !.:.!::::: (• k l' ·l.:::i i'i'! ::::=
2
[
~¢R-N602
3
XXXXXX
Disables the Bluetooth function.
On (Default)
Enables the Bluetooth function. Immediately
after selecting the "On", output of the network
source is paused.
!i·
Press ENTER twice to enter the name edit
display.
1',11~11''1
Off
~
Use the cursor keys ( <l/1>) to move the edit
position and the cursor keys (.6. I v) to select
a character.
Standby (Biuetooth Standby)
•
Selects whether to enable/disable the function that turns
on the unit from Bluetooth devices (Bluetooth standby). If
this function is set to "On", the unit automatically turns on
when a connect operation is performed on the Bluetooth
device.
Off
Disables the Bluetooth standby function.
On (Default)
Enables the Bluetooth standby function. (The
unit consumes more power than when "Off' is
selected.)
This setting is not available whe n " Standby (Network Standby)"
(p. 44) is set to "Off'.
You can insert I delete a character, by pressing
PRESET) (insert) or PRESET< (delete).
4
To confirm the new name, press ENTER.
5
To exit from the menu, press SETUP.
•
Update (Network Update)
Updates the firmware via the network.
Audio Receive
•
Receives audio settings from the Bluetooth device.
Disconnect
Disconnects the connected Bluetooth device. To
disconnect the Bluetooth device, press ENTER
on the remote control.
Audio Send
•
Transmit audio from the unit to Bluetooth speakers or
headphones.
Perform
Update
Starts the process to update the unit's firmware.
For details, see "Updating the unit's firmware via
the network" (p. 49).
Off (Default)
Audio can not be transmitted.
Displays the version of the firmware installed on
the unit.
On
Version
Enables audio transmission. Specify the audio
transmission settings using the dedicated
MusicCast CONTROLLER app for mobile
devices.
lD
Displays the system !D number.
45
En
Configuring various functions (Setup menu)
Sets the maximum volume to prevent excessive loudness.
Setting range
-30 dB to+ 15.0 dB I+ I 6.5 dB (5 dB step)
Default
+16.5 dB
Sets the initial volume when the receiver is turned on.
Setting range
Off, Mute, -80.0 dB to+ 16.5 dB (0.5 dB Step)
Default
Off
Enables/disables the auto-standby function. If you do not
operate the unit for the specified time, the unit will
automatically go into standby mode.
Off
(Default)
Does not set the unit to standby mode
automatically.
On
Sets the unit to standby mode automatically.
While NET, BLUETOOTH or USB is selected as
the input source, the unit will switch to standby
mode if the selected source is not played back for
20 minutes.
For all input sources, the unit will switch to
standby mode if it is not operated for 8 hours.
,,,
~"'~
Just before the unit enters standby mode, "AutoPowerStdby"
appears and then countdown starts in the front display.
Enables/disables the eco (power saving) mode. When the
eco mode is enabled, you can reduce the unit's power
consumption.
The new setting will take effect after the unit is restarted.
Be sure to press ENTER to restart the unit after selecting a
setting.
Off (default)
Disables the eco mode.
On
Enables the eco mode.
When "ECO Mode" is set to "On", the front display may become
dark.
46 En
Configuring the system settings (ADVANCED SETUP menu)
Configure the system settings of the unit while viewing the front display.
1
Turn off the unit.
2
While holding down RETURN on the front
panel, press <!> (power).
OOto
I
....
I
I
I
I
""I
''"'
"'''
0
0
I
OliO
0
.:::: r··
0
RETURN
<!>(power)
.L !· ! r..
'"
:: ::
0
I
==
010
10
00
:::::
:~
I
0
00110
0 000
::
"'I
0
I
I
10
I
0
0
1· i .L !··!
Change the unit's speaker impedance settings depending
on the impedance of the speakers connected.
Settings
3
Rotate SELECT/ENTER to select an item.
4
Press SELECT/ENTER to select a setting.
5
Press <!> (power) to set the unit to turn off and
turn it on again.
The new settings take effect.
Item
Function
Page
SPIMP.
Changes the speaker impedance
setting.
47
REMOTE ID
Selects the unit's remote controllD.
47
INIT
Restores the default settings.
47
UPDATE
Updates the firmware.
48
VERSION
Checks the version of firmware
currently installed on the unit.
48
4QMIN
Select this option when you connect speakers with
an impedance of 4 ohms to less than 8 ohms to the
unit.
SO MIN
(Default)
Select this option when you connect speakers with
an impedance of 8 ohms or more to the unit.
1111
001"
I
01
II
I
''"
II
I
0
I
0
I
I
0>1
"
'''
0
0001
0
I
0
II
>
I
10
I
10010
I
I
0
I
0
11111
I
I
. ....... . ... . .....
"''
1011
1100
I
0
Ill
0
0
0
I
I
til
0
0
0
0
I
... ...
0
0
I
0
0
01
U
IIi
0
0
00
0
00
0
o o
000000
01
>OtliO
0
I
0
0
0
>
0
0
I
0
011
0
0
0
0
. .......
>
o
I
0
0
0
0
When using multiple receivers in the same room, setting
the remote control ID of this unit to IDl (and setting the
another receiver to other than ID 1 can prevent interference
from other remote controls.
Settings
ID 1, AUTO (default)
.... ........ .... ...... .. .. .. .... ..............
.
........
.....
....................
......
... ..... .. .
..........
......
.... . ... .... .. .. ..
'
Restores the default settings for the unit.
Choices
ALL
Restores the default settings for the unit.
NETWORK
Initialize all of the network, Bluetooth and USB
settings. When performing the initialization, the
preset (p. 41) registered by NET/USB input will
be cleared.
CANCEL
Does not perform an initialization.
47
En
Configuring the system settings (ADVANCED SETUP menu)
..........................
............ .......
............
.......
. ... ... .. .... ....
'
' .
... ...
......
..
. ..............
. .....
.......
.... .........
.............
".
........
.. .. ....
.. ......
. ....... ........ .
. .............. ... ... . .
.... ... .. .. ..............
.. .. ..
.. ...
..
.
...........
...... ...
. ....... .....
... . .
.......
.. ' . ......
. . ..
0
0
New firmware that provides additional features or product
improvements will be released as needed. If the unit is
connected to the Internet, you can download the firmware
via the network. For details, refer to the information
supplied with updates.
•
Firmware update procedure
Do not perform this procedure unless firmware update is
necessary. Also, make sure you read the information
supplied with updates before updating the firmware.
1
Press SELECT/ENTER repeatedly to select
"USB" or "NETWORK" and press DISPLAY to
start firmware update.
Choices
USB
Update the firmware using a USB memory device.
NETWORK
Update the firmware via the network.
,,,
~<i>~
If the unit detects newer firmware over the network,
"NewFwAvailable" appears as the "Information" menu item in
"Network". In this case, you can also update the unit's firmware
by following the procedure in "Updating the unit's firmware via
the network" (p. 49).
48 En
I
I
00
I
0
00
Oo
0
<
0
0
0
0
0"
I
I
0
0
0
o
o
<
0
I
Check the version of firmware currently installed on the
unit.
,,,
~<i>~
• You can also check the firmware version in "U pdate (Network
Update)" (p. 45) in the "Setup" menu.
• It may take a while until the firmware version is displayed.
Updating the unit's firmware via the network
New firmware that provides additional features or product improvements will be released as needed. If the unit is
connected to the Internet, you can download the firmware via the network and update it.
• Do not operate the unit or disconnect the power cable or network cable during firmware update. Firmware update takes about 20
minutes or more (depending on your Internet connection speed).
• If the unit is connected to the wireless network via a wireless network adapter, network update may not be possible depending on
the condition of the wireless connection. In this case, update the firmware using the USB memory device (p. 48).
:'¥-:.
You can also update the firmware using the USB memory device
from the "ADVANCED SETUP"' menu (p. 48).
7
If "UPDATE SUCCESS" appears on the front
display, press c!> (power) on the front panel.
The firmware update is complete.
Cursor keys
L:./'V
ENTER
RETURN
SETUP
1
Press SETUP.
2
Use the cursor keys (.6. I V) to select
"Network" and press ENTER.
3
Use the cursor keys (.6. I V) to select
"Information" and press ENTER.
If new firmware is available, "NewFwAvailable"
appears on the front display.
l\l El~~l
!~~
l--1
. .. . ..
...
~ ;::::.
;·": .....
i...~ :..:.:::! '! ~ .::::
""'·:· .............
........
4
Press RETURN to return the previous state.
5
Use the cursor keys (.6. I v) to select
"Update" and press ENTER.
UF Ii :-: T :=
1
'o
"''
"
·:::· :
6
.
o
"
000
0
0
o oo
::::· :
'
11
1
"
0
0'"
no
0
0
Ill
O
"
: :...: :
UO
l i o
:: :
..
I
o
0
o
I
0
. .
I
I
UU
0
0
"
I
'
00
001
I
""
I
oo o
o
0
:...: l'" :...: ·:::: :... ::::·
To start the firmware update, press ENTER.
The unit to restart and the firmware update starts.
,,,
~<i>~
To cancel the operation without updating the firmware, press
SETUP.
49 En
Troubleshooting
Refer to the chart below if this unit does not function properly. If the problem you are experiencing is not listed below or
if the instructions below do not help, set this unit to standby mode, disconnect the power cable, and contact the nearest
authorized Yamaha dealer or service center.
•
General
Problem
See
page
Cause
Remedy
The protection circuitry has been activated
three times consecutively. If the unit is in
this condition, the standby indicator on the
unit blinks when you try to tum on the
power.
As a safety precaution, capability to tum on the power
is disabled. Contact your nearest Yamaha dealer or
service center to request repair.
The power cable is not connected or the
plug is not completely inserted.
Connect the power cable firmly.
The protection circuitry has been activated
because of a short circuit, etc.
Check that the speaker wires are not touching each
other and then tum the power of this unit back on.
12
The internal microcomputer has frozen,
due to an external electric shock (such as
lightning or excessive static electricity) or
to a drop in the power supply voltage.
Tum OFF the~ (Power) on the front panel and tum it
ON again after at least 15 seconds elapse. (If the
problem persists, disconnect the power cable from the
AC wall outlet and plug it again.)
-
The power does not
turn off.
The internal microcomputer has frozen,
due to an external electric shock (such as
lightning or excessive static electricity) or
to a drop in the power supply voltage.
Tum OFF the~ (Power) on the front panel and tum it
ON again after at least 15 seconds elapse. (If the
problem persists, disconnect the power cable from the
AC wall outlet and plug it again.)
-
No sound.
Incorrect input or output cable
connections.
Connect the cables properly. If the problem persists,
the cables may be defective.
11
No appropriate input source has been
selected.
Select an appropriate input source with the INPUT
selector on the front panel (or one of the input
selection key on the remote control).
21
The SPEAKERS A/8 switches are not set
properly.
Turn on the corresponding SPEAKERS A or
SPEAKERS B.
21
Speaker connections are not secure.
Secure the connections.
II
Output has been muted.
Tum off the mute.
9
The Max volume or Initial volume setting
is set too low.
Check the settings for "Max Volume" and " Initial
Volume" in the "Setup" menu.
46
The component corresponding to the
selected input source is turned off or is not
playing.
Tum the component on and make sure it is playing.
The audio output of a device connected to
a digital audio input (COAXIAL/
OPTICAL jacks) is set to other than PCM.
Set the audio output of the connected device to PCM.
The protection circuitry has been activated
because of a short circuit, etc.
Set the speaker impedance to match your speakers.
47
Check that the speaker wires are not touching each
other and then tum the power of this unit back on.
12
This unit has become too hot.
Make sure the openings on the top panel are not
blocked.
-
The auto power standby function has
turned this unit off.
Change the auto power standby ("A utoPowerStdby"
in the " Setup" menu) to tum off.
46
The power does not
turn on.
The sound suddenly
goes off.
50 En
-
-
-
-
Troubleshooting
Problem
Only the speaker on
one side can be
heard.
Cause
Remedy
See
page
Incorrect cable connections.
Connect the cables properly. If the problem persists,
the cables may be defective.
ll
Incorrect setting for the speaker balance.
Set the BALANCE control to the appropriate
position.
22
There is a lack of bass
and no ambience.
The + and- wires are connected in
reverse at the amplifier or the speakers.
Connect the speaker wires to the correct + and phase.
12
A "humming" sound
can be heard.
Incorrect cable connections.
Connect the audio plugs firmly. If the problem
persists, the cables may be defective.
11
No connection from the turntable to the
GND terminal.
Make the GND connection between the turntable and
this unit.
11
The volume level is
low while playing a
record.
The record is being played on a turntable
with an MC cartridge.
The turntable should be connected to this unit through
the MC head amplifier.
The sound is
degraded when
listening with the
headphones
connected to the CD
player or the tape
deck connected to
this unit.
The power of this unit is turned off, or this
unit is set to standby mode.
Tum on the power of this unit.
The sound level is
low.
The loudness control function is
operating.
-
-
Turn down the volume, set the LOUDNESS control
to the FLAT position, and then adjust the volume
again.
22
51
En
Troubleshooting
Tuner
•
Problem
FM/
AM
AM
52
En
Remedy
See
page
The particular characteristics of the FM
stereo broadcasts being received may
cause this problem when the transmitter is
too far away or the antenna input is poor.
Check the antenna connections.
Try using a high-quality directional FM antenna.
13
Switch to monaural mode.
24
There is
distortion, and
clear reception
cannot be
obtained even
with a good FM
antenna.
There is multipath interference.
Adjust the antenna position to eliminate the multipath
interference.
The desired
station cannot
betunedin
with the
automatic
tuning method.
The signal is too weak.
NO PRESETS
is displayed.
No preset stations are registered.
Register stations you want to listen to as preset
stations before operation.
24
The desired
station cannot
betunedin
with the
automatic
tuning method.
The signal is weak or the antenna
connections are loose.
Tighten the AM antenna connections and orient it for
the best reception.
-
Automatic
station preset
does not work.
Automatic station preset is not available
for AM stations.
Use manual station preset.
There are
continuous
crackling and
hissing noises.
The noises may result from lightning,
fluorescent lamps, motors, thermostats or
other electrical equipment.
Try using an outdoor antenna and a ground wire.
This will help somewhat, but it is difficult to
eliminate all noise.
There are
buzzing and
whining noises.
A TV set is being used nearby.
Move this unit away from the TV set.
FM stereo
reception is
noisy.
FM
Cause
-
Try using a high-quality directional FM antenna.
13
Try using the manual tuning method.
24
Try using the manual tuning method.
24
25
-
-
Troubleshooting
•
Bluetooth
Problem
A Bluetooth
connection cannot be
established.
No sound is
produced, or the
sound is interrupted
during playback.
Cause
Remedy
See
page
The 8/uetooth function of the unit is
disabled.
Enable the Bluetooth function in the "Setup" menu.
Another B/uetooth device is already
connected to the unit.
Terminate the current Bluetooth connection and then
establish a new connection.
The unit and the Bluetooth device are too
far apart.
Move the Bluetooth device closer to the unit.
There is a device (such as microwave
oven and wireless LAN) that outputs
signals in the 2.4 GHz frequency band
nearby.
Move the unit away from those devices.
The Bluetooth device does not support
A2DP.
Use a Bluetooth device that supports A2DP.
Since this unit has been paired with more
than 20 Bluetooth devices, pairing
information has been deleted.
Try pairing again.
This unit can be paired with a maximum total of 20
Bluetooth devices for reception and transmission.
When the 21st device is registered, the least
frequently used pairing information is deleted.
The volume of the Bluetooth device is set
too low.
Tum up the volume of the Bluetooth device.
The Bluetooth device is not set to send
audio signals to the unit.
Switch the audio output of the Bluetooth device to the
unit.
-
The 8/uetooth connection has been
terminated.
Establish a Bluetoath connection between the
8/uetooth device and the unit again.
27
The unit and the Bluetooth device are too
far apart.
Move the Bluetooth device closer to the unit.
There is a device (such as microwave
oven and wireless LAN) that outputs
signals in the 2.4 GHz frequency band
nearby.
Move the unit away from those devices.
45
45
-
-
-
27
-
-
-
53 En
Troubleshooting
•
USB and network
Problem
The unit does not
detect the USB
device.
Cause
Remedy
The USB device is not connected to the
USB jack securely.
Tum off the unit, reconnect your USB device, and
turn the unit on again.
The file system of the USB device is not
FAT16 or FAT32.
Use a USB device with FAT16 or FAT32 format.
Folders and files in
the USB device
cannot be viewed.
The data in the USB device is protected
by the encryption.
Use a USB device without an encryption function.
The network feature
does not function.
The network parameters (I P address) have
not been obtained properly.
Enable the DHCP server function on your router and
set " DHCP" in the "Setup" menu to "On" on the unit.
If you want to configure the network parameters
manually, check that you are using an IP address
which is not used by other network devices in your
network.
The unit cannot
connect to the
Internet via a wireless
router (access point).
See
page
-
-
-
44
The wireless router (access point) is
turned off.
Tum on the wireless router (access point).
The unit and the wireless router (access
point) are too far apart.
Place the unit and the wireless router (access point)
closer to each other
-
There is an obstacle between the unit and
the wireless router (access point).
Move the unit and the wireless router (access point)
in a location where there are no obstacles between
them.
-
Microwave ovens or other wireless
devices in your neighborhood might
disturb the wireless communication.
Tum oil these devices.
Access to the network is restricted by the
firewall settings of the wireless router
(access point).
Check the firewall setting of the wireless router
(access point).
The media sharing setting is not correct.
Configure the sharing setting and select the unit as a
device to which music contents are shared.
Some security software installed on your
PC is blocking the access of the unit to
your PC.
Check the settings of security software installed on
your PC.
The unit and PC are not in the same
network.
Check the network connections and your router
settings, and then connect the unit and the PC to the
same network.
14
The files in the media
server (PCs/NAS)
cannot be viewed or
played back.
The files are not supported by the unit or
the media server.
Use the file format supported by both the unit and the
media server. For information about the tile formats
supported by the unit, see "Playing back music stored
on media servers (PCs/NAS)".
29
The Internet radio
cannot be played.
The selected Internet radio station is
currently not available.
There may be a network problem at the radio station,
or the service may have been stopped. Try the station
later or select another station.
-
The selected Internet radio station is
currently broadcasting silence.
Some Internet radio stations broadcast silence at
certain of times of the day. Try the station later or
select another station.
-
Access to the network is restricted by the
firewall settings of your network devices
(such as the router).
Check the firewall settings of your network devices.
The Internet radio can be played only when it passes
through the port designated by each radio station. The
port number varies depending on the radio station.
-
The iPod does not
recognize the unit
when using AirPlay.
The unit is connected to a multiple SSID
router.
Access to the unit might be restricted by the network
separation function on the router. Connect the i Pod to
the SSID which can access the unit.
-
Firmware update via
the network is failed.
It may not be possible depending on the
condition of the network.
Update the firmware via the network again or use a
USB memory device.
48
Wireless network is
not found.
The unit does not
detect the PC.
54
En
-
-
-
29
-
Troubleshooting
•
Remote control
Problem
The remote control
does not work nor
function properly.
Remedy
See
page
The remote control will function within a maximum
range of6 m (20ft) and no more than 30 degrees offaxis from the front panel.
10
Cause
Wrong distance or angle.
Direct sunlight or lighting (from an
inverter type of fluorescent lamp, etc.) is
striking the remote control sensor of this
unit.
Reposition this unit.
The batteries are weak.
Replace all batteries.
-
-
55
En
Error indications on the front display
Message
Remedy
Cause
Access denied
Access to the PC is denied.
Configure the sharing settings and select the unit as a device to
which music contents are shared (p. 29).
Access error
The unit cannot access the USB device.
Turn off the unit and reconnect your USB device. If the problem
persists, try another USB device.
The unit cannot access the iPod.
Tum off the iPod and tum it on again.
The connected iPod is not supported by
the unit.
Use an iPod supported by the unit (p. 38).
There is a problem with the signal path
from the network to the unit.
Make sure your router and modem are turned on.
Check the connection between the unit and your router (or hub)
(p. 14).
Check SP Wires
The speaker cables short circuit.
Twist the bare wires of the cables firmly and connect to the unit
and speakers properly.
No content
There are no playable files in the selected
folder.
Select a folder that contains files supported by the unit.
Please wait
The unit is preparing for connecting to the
network.
Wait until the message disappears. If the message stays more than
3 minutes, turn otfthe unit and tum it on again.
Unable to play
The unit cannot play back the songs stored
on the iPod for some reason.
Check the song data. If it cannot be played on the iPod itself, the
song data or storage area may be defective.
The unit cannot play back the songs stored
on the PC for some reason.
Check if the format of files you are trying to play is supported by
the unit. For information about the formats supported by the unit,
see " Playing back music stored on media servers (PCs/NAS)" (p.
29). If the unit supports the file format, but still cannot play back
any files, the network may be overloaded with heavy traffic.
Firmware update is failed.
Update the firmware again.
Version error
56 En
Trademarks
Made for
~ iPod OJ iPhone
AirPlay
"Made for iPod" and "Made for iPhone" mean that an
electronic accessory has been designed to connect
specifically to iPod or iPhone, respectively, and has been
certified by the developer to meet Apple performance
standards.
Apple is not responsible for the operation of this device or
its compliance with safety and regulatory standards.
Please note that the use of this accessory with iPod or
iPhone may affect wireless performance.
AirPlay, iPhone, iPod, iPod nano, iPod touch and iTunes
are trademarks of Apple Inc., registered in the U.S. and
other countries.
$"fJJJJI~'"
DLNA TM and DLNA CERTIFIED™ are trademarks or
registered trademarks of Digital Living Network Alliance.
All rights reserved. Unauthorized use is strictly
prohibited.
Windows™
Windows is a registered trademark of Microsoft
Corporation in the United States and other countries.
Internet Explorer, Windows Media Audio and Windows
Media Player are either registered trademarks or
trademarks of Microsoft Corporation in the United States
and/or other countries.
Android™
Android and Google Play are trademarks of Google, Inc.
41hFiJ
CERTIFIED
The Wi-Fi CERTIFIED Logo is a certification mark of the
Wi-Fi Alliance.
The Wi-Fi Protected Setup Identifier Mark is a mark of the
Wi-Fi Alliance.
Wi-Fi, Wi-Fi Alliance, Wi-Fi CERTIFIED, Wi-Fi
Protected Setup, WPA and WPA2 are trademark or
registeredrademark ofWi-Fi Alliance.
0 Bluetooth®
The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of
such marks by Yamaha Corporation is under license.
Bluetooth protocol stack (Blue SDK)
Copyright 1999-2014 OpenSynergy GmbH
All rights reserved. All unpublished rights reserved.
Explanations regarding GPL
This product utilizes GPL/LGPL open-source software in
some sections. You have the right to obtain, duplicate,
modify, and redistribute this open-source code only. For
information on GPL/LGPL open source software, how to
obtain it, and the GPLILGPL license, refer to the Yamaha
Corporation website
(http:/I down Ioad. yamaha. com/sourcecodes/musiccast/).
muslccasr
MusicCast is a trademark or registered trademark of
Yamaha Corporation.
57
En
Specifications
Network
•
•
•
•
•
•
•
Input jack: NETWORK xI (IOOBase-TX/IOBase-T)
PC client function
Compatible with DLNA ver. 1.5
AirPlay supported
Internet radio
Streaming service
Wi-Fi function
Capable ofWPS
Capable of sharing with iOS devices by wireless connection and
USB connection
Capable of direct connection with mobile device
Available security method: WEP, WPA2-PSK (AES), Mixed Mode
Radio frequency band: 2.4 GHz
Wireless network standard: IEEE 802.11 b/g/n
Bluetooth
• Source function
This unit to sink device (ex. Bluetooth headphone)
Supported codec .......................................................................... SBC
• Sink function
Source device to this unit (ex. smartphone/tablet)
Supported codec ............................................................... SBC, AAC
• Capable of play/stop operation from sink device
• Bluetooth version ......................................................... Yer. 2.1 +EDR
• Supported profile ........................................................ A2DP, AYRCP
• Wireless output... ........................................... ......... Bluetooth Class 2
• Maximum communication distance
........................................................ ! 0 m (33 ft) without interference
USB
• Input jack: USB xI (USB2.0)
• Capable ofiPod, mass storage class USB memory
• Current supply capacity: 1.0 A
Audio
• Minimum RMS output power
(20Hz to 20kHz, 0.04% THO, 8 0) ....................... 80 W + 80 W
• Dynamic power per channel (IHF) (8/6/4/2 0)
............................................................................ 105/125/150/178 w
• Maximum power per channel (I kHz, 0.7% THO, 4 0)
[U.K. and Europe models] ................................................... 105 W
• IEC power (I kHz, 0.04% THO, 8 0)
[U.K. and Europe models] .................... ................................. 84 W
• Power band width (main L/R)
(0.06% THO 40.0 W, 80) ...................................... 10 Hz to 50 kHz
• Damping factor (SPEAKERS A)
I kHz, 8 0 .................................................................. 150 or more
• Maximum effective output power (JEITA)
(I kHz, 10% THO, 8 0)
[Asia and General models] ................................................... 115 W
• Input sensitivity/input impedance
PHONO (MM) ......................................................... 3.5 mY/47 kO
CD, etc ................................ .. ... .. .......... .. ................ 200 mY/47 ill
• Maximum input signal
PHONO (MM) (1 kHz, 0.003% THO) .................. 60 mV or more
CD, etc. (1kHz, 0.5% THD) ..................................... 2.2 Y or more
• Output level/output impedance
CD, etc. (input 1 kHz, 200 mY)
OUT .................................................................... 200 mV/1.1 kO
SUB WOOFER PRE OUT ........................... ......... 4.0 Y I 1.2 ill
(Cut otT frequency) ............................................................. 90Hz
PHONES (8 0 load) .................. .. ... ....... .. .... .. ....... 410 mV/470 0
• Frequency response
CD, etc. (20Hz to 20kHz) ........................................... 0 ± 0.5 dB
CD, etc. (10Hz to 100kHz, PURE DIRECT on) ......... 0 ± 1.0 dB
58 En
• RIAA equalization deviation
PHONO (MM) ............................. ..... .. .... ........ ... ................ ± 0.5 dB
• Total harmonic distortion
PHONO (MM) to OUT
(20 Hz to 20 kHz, 3 V) ........................................ 0.025% or less
CD, etc. to SPEAKERS
(20Hz to 20kHz, 40.0 W, 8 0) ........... .. .............. 0.015% or less
• Signal to noise ratio (IHF-A Network)
PHONO (MM) (input shorted, 5 mV) ...................... 87 dB or more
CD, etc. (input shorted, 200m Y) ........................... ! 00 dB or more
• Residual noise (IHF-A network) ............................................. 30 flY
• Channel separation
CD, etc. (5.1 ill input shorted, 1110kHz) ......... 65/50 dB or more
• Tone control characteristics
BASS
Boost/cut (20Hz) .............................. .. ........................... ± 10 dB
Turnover frequency .......................................................... 350 Hz
TREBLE
Boost/cut (20kHz) ......................................................... ± 10 dB
Turnover frequency ............................. .. .......................... 3.5 kHz
• Continuous loudness control
Attenuation 1 kHz .................................. ...... .. ....................... -30 dB
• Gain tracking error (+16.5 to -80 dB) .......................... 0.5 dB or less
• Digital input (OPTICAL/COAXIAL)
Support audio sample rate .......... 32/44.1/48/88.2/96/176.4/192 kHz
FM
• Tuning range
[U.S.A. and Canada models] ........................... 87.5 to 107.9 MHz
[Asia and General models] ........ 87.5/87.50 to 108.0/108.00 MHz
[U.K., Europe, Korea, Australia models] .... 87.50 to 108.00 MHz
• 50 dB quieting sensitivity (IHF, I kHz, 100% MOD.)
Mono .................................................................. 3.0 flY (20.8 dBf)
• Signal to noise ratio (IHF)
Mono/stereo .............................................. .. ............... 65 dB/64 dB
• Harmonic distortion (I kHz)
Mono/stereo .................................................................. 0.5%/0.6%
• Antenna input .................... ................ .. ................... 75 W unbalanced
AM
• Tuning range
[U.S.A. and Canada models] ............................... 530 to 1710kHz
[Asia and General models] .................. 530/531 to 171011611 kHz
[U .K, Europe, Korea, Australia models] .............. 531 to 1611 kHz
General
• Power supply
[U.S.A. and Canada models] .............................. AC 120 V, 60Hz
[General model] ....................... AC II 0-120/220-240 V, 50/60 Hz
[Korea model] ................... ................................... AC 220 Y, 60 Hz
[Australia model] .................................. .............. AC 240 Y, 50 Hz
[U.K. and Europe models] .................................. AC 230 Y, 50 Hz
[Asia model] ................................ .......... AC 220-240 Y, 50/60Hz
• Power consumption ................................................................. 190 W
• Offmode ...................................................................... .. ........... O.l W
• Standby power consumption (reference data) .......................... 0.1 W
• Network Standby on
Wired ..................................................................................... !.? W
Wireless (Wi-Fi/Wireless Direct/Bluetooth) .... 1.8 W/1.9 W/1.6 W
• Maximum power consumption (I kHz, 8 0, 10% THO)
[U.K., Australia, Asia and General models] ......................... 380 W
• Dimensions (W x H x D) ............................... .435 x !51 x 392 mm
(J7-J/8" X 6" X !5-7/16")
• Weight... ................................................................... 9.8 kg (21.6lbs)
* Specifications are subject to change without notice.
Index
A
ADVANCED SETUP menu ...... ....................................
AirPlay ............................................... .... ............ ............
AM antenna connection................................. ......... .......
AM radio listening .................................................... .....
ANTENNAjacks ........................... ................................
Audio device connection ...............................................
Audio file format (PC/NAS) .... ............ ..........................
Audio file format (USB) .......... ......................................
Audio Receive (Bluetooth, Setup menu) .......................
Audio reception (Bluetooth) ..........................................
Audio Send (Bluetooth, Setup menu) ............................
Audio transmit (Bluetooth) ............................................
Auto Power Standby ......................................................
Auto preset (FM radio) ..................................................
Auto Preset (Option menu) ............................................
AutoPowerStdby (Setup menu) ........ ......................... ....
47
34
13
24
13
11
29
36
45
45
45
45
46
24
24
46
B
BALANCE control ........................................................ 22
Basic playback operation .......................................... ..... 21
BASS control ...................................................... ........... 22
Batteries .... .............. ... .. ...... .. .. .. ................. ... .... .. ... .. .... .. . 10
Bi-wire connection .................................................... ..... 12
Bluetooth ........................................................................ 27
Bluetooth (Setup menu) ................................................. 45
Bluetooth indicator .......................................................... 7
Bluetooth Standby ......................................................... 45
Bookmark (Internet radio) ............................................. 33
c
CD jacks ..................................................................... 8, 11
Clear Preset (Option menu) ........................................... 26
COAXIAL jacks .................................................... .... 8, 11
Connection (Bluetooth) ...................................... ........... 27
Connection (iPod) ......... ................................................. 38
Connection (Network, Setup menu) .............................. 44
Connection (USB) ......................................................... 36
Connection method (Network) ...................................... 44
D
DHCP (Network, Setup menu) ...................................... 44
Digital Media Controller. ............................................... 44
DIMMER ....... .................... ................... ...... ..................... 5
DISPLAY ................................ ......................... ............. 40
DLNA ........................ ....... ...... ..................................... .. 29
DMC Control (Network, Setup menu) .......................... 44
E
ECO Mode (Setup menu) .............................................. 46
Error indication .............................................................. 56
F
Firmware update ................................................ 45, 48, 49
Firmware version ..................................................... 45, 48
FM antenna connection .................................................. 13
FM mode ........................................................................ 24
FM radio listening ............. ............................................. 24
Front display (Controls and functions) ........ ................... . 7
Front panel (Controls and functions) ............................... 5
H
headphone ........................................................................ 6
Information (Network, Setup menu) .............................. 44
Information switching (Front display) ........................... 40
INIT (ADVANCED SETUP menu) .............................. 47
Initial Volume (Setup menu) .......................................... 46
Initial volume setting ..................................................... 46
Initialize ......................................................................... 47
Input selection keys ........................................................ 21
INPUT selector .................................................... .......... 21
Internet radio (vTuner) ................................................... 32
IP Address (Network, Setup menu) ............................... 44
IP address setting ........................................................... 44
iPod contents playback (AirPlay) .................................. 34
iPod contents playback (USB) ................................ ....... 38
iTunes contents playback (AirPlay) ............................... 34
L
LINE jacks ................................................................. 8, 11
LOUDNESS control .................. .................................... 22
M
MANUAL (Wireless, Setup menu) ............................... 18
Manual network setting .................................................. 18
Max Volume (Setup menu) ....................................... ..... 46
Max volume setting ........................................................ 46
Media sharing setup .................................... ................... 29
MEMORY .......................................................... 25, 26, 41
Monaural (FM radio) ..................................................... 24
Mono (FM radio) ........................................................... 24
MusicCast CONTROLLER ............................................. 3
N
NAS (Network attached Storage) connection .......... ...... 14
NAS contents playback .................................................. 29
Net Radio ....................................................................... 32
Network (Setup menu) .................................................. . 44
Network cable ................................................................ 14
Network connection ................................................. 15, 20
Network connection (Setup menu) ............................... . 44
Network connection (Wired) ......................................... 14
Network connection (Wireless LAN) .......... 16, 17, 18, 19
Network connection status ............................................. 20
Network information ...................................................... 44
Network Name (Network, Setup menu) ........................ 45
Network Standby................................. ........................... 44
NEW FW Available ....................................................... 49
59
En
X
0
OPTICAL jacks ......................................................... 8, 11
OPTION ........................................................................ 42
Option menu ............. ..................................................... 42
p
Pairing (Bluetooth) ........................................................ 27
PC connection ................................................................ 14
PC contents playback .. ... . ..... .... . ........ ... . .... . ... .. . ... .. .... .. .. 29
Perform Update ............................................................. 45
PHONES jack .................................................................. 6
PHONO jacks ......................................................... ... 8, 11
Playback (AirPlay) ........................................................ 34
Playback (Biuetooth) ..................................................... 27
Playback (FM/AM radio) .............................................. 24
Playback (Internet radio) ................................... ............ 32
Playback (iPod) ............................................................. 38
Playback (PC/NAS) ....................... ........................... ..... 29
Playback (USB) ........... ....... ........................................... 36
Power cable connection ................................................. 14
Power saving mode............................................... ......... 46
Preset ......................................................... .................... 41
Preset (FM/AM radio) ............................................. 25, 26
Preset (Network) ....... ..................................................... 41
Preset function ................................................. .............. 41
R
Rear panel (Controls and functions) ................................ 8
Remote control (Controls and functions) ........................ 9
Remote control ID ......................................................... 47
REMOTE ID (ADVANCED SETUP menu) ................ 47
REPEAT (iPod) ............................................................. 39
REPEAT (PC/NAS) ...................................................... 31
REPEAT (USB) ................................... ......................... 37
Repeat playback (iPod) .................................................. 39
Repeat playback (PC/NAS) ........................................... 31
Repeat playback (USB) ................................................. 37
s
Security (Wireless Direct, Setup menu) ........................ 19
Security (Wireless, Setup menu) ................................... 18
Security Key (Wireless Direct, Setup menu) ................ 19
Security Key (Wireless, Setup menu) ........................... 18
Server ............................................................. ..... ........... 29
Server connection .......................................................... 14
SETUP ........................................................... ....... ......... 43
Setup menu ........ ...................... .................................. .... 43
Sharing Wi-Fi connection setting (iOS device) ............. 16
SHUFFLE (iPod) ........................................................ ... 39
SHUFFLE (PC/NAS) ................................. ........ ....... .... 31
SHUFFLE (USB) .......................................................... 37
Shuffle playback (iPod) ................................................. 39
Shuffle playback (PC/NAS) .......................................... 31
Shuffle playback (USB) ................................................ 37
Signal Info (Option menu) ............................................. 42
Signal strength indicator. ....... .......................................... 7
SLEEP indicator ........ .................................................... 23
Sleep timer ..................................................................... 23
SP IMP. (ADVANCED SETUP menu) ........................ 47
60 En
Speaker balance .............................................. ............... 22
Speaker cable connection ............................................... 12
Speaker connection ........................................................ 12
Speaker impedance ........................................................ 47
Speaker indicators ............................................................ 7
Speaker selection ........................................................... 21
SPEAKERS A/B ........................................ ................ .... 21
SSID (Wireless Direct, Setup menu) ............................. 19
SSID (Wireless, Setup menu) ........................................ 18
Standby (Bluetooth, Setup menu) ................ .................. 45
Standby (Network, Setup menu) .................................... 44
STATUS (Information, Setup menu) ............................. 20
Stereo (FM radio) ............................................... ............ 24
SUBWOOFER PRE OUT jacks ................................ 8, 11
System ID ...................................................................... 45
T
Tone control ................................................................... 22
TREBLE control ................................... ......................... 22
u
UPDATE (ADVANCED SETUP menu) ......................
Update (Network, Setup menu) .....................................
USB ................................................................................
USB (iPod) ...... ...............................................................
USB contents playback ..................................................
48
45
36
38
36
v
VERSION (ADVANCED SETUP menu) .....................
Version (Network, Setup menu) ....................................
Vol.Interlock (Option menu) .........................................
Volume control ..............................................................
. menu) ................................. .
Volume Interlock (Opt1on
Volume Trim (Option menu) .........................................
48
45
42
21
42
42
w
WAC .............................................................................. 16
Wi-Fi indicator ................................................... .............. 7
Wired (Network, Setup menu) ................................... .... 44
Wired connection (Network) ................................... ...... 14
Wireless (Network, Setup menu) ................................... 44
Wireless (WAC) (Wireless, Setup menu) ...................... 16
Wireless Accessory Configuration ................. ............... 16
Wireless antenna ........... ................................................... 8
Wireless antenna (Wi-Fi) ............................................... 14
Wireless connection (Bluetooth) ................................... 27
Wireless connection (Network) ................... 16, 17, 18, 19
Wireless Direct ............. ................................................. 19
WirelessDirect (Network, Setup menu) ......................... 44
WPS (Wireless, Setup menu) ......................................... 17
. ................................... .. 17
WPS push button configuratiOn
OYAMAHA
YAMAHA CORPORATION
© 201 5 Yamaha Corporation
Printed in Malaysia ZS22650
YAMAHA CORPORATION
eYAMAHA
© 2015 Yamaha Corporation ZS95430
Supplement to Listen to SiriusXM
Notes
• Configure basic settings for the MusicCast
CONTROLLER app before using the service.
• To use this function, the unit must be connected to the
Internet. For detail on connections and network
settings, refer to "Owner's Manual".
• Available functions may vary according to your location.
Service areas of Network Music Services are limited.
Service areas may change without notice.
With SiriusXM, you get over 155 SiriusXM
channels, including commercial-free music from
nearly every genre, plus the best sports, talk,
news and entertainment.
2349. See our Customer Agreement for
complete terms at siriusxm.com.
All fees and programming are subject to change.
You may always change your Privacy
Preferences with us. See our Customer
Agreement and Privacy Policy for complete
terms at www.siriusxm.com.
For Canadian customers
During the 30-day free trial period you will only have
access to free trial content; even if you have fully
subscribed during the trial period.
After the 30-day free trial period Canadian-based
subscribers will have access to Canadian content.
How to Access SiriusXM on this unit
Current SiriusXM Subscribers:
If you have a paid All Access subscription, or
a trial subscription to the SiriusXM All Access
package in your vehicle, use your existing
streaming username and password to log in and
listen on this unit. If you have not already set up a
username and password, download the SiriusXM
app to your smartphone or tablet and follow the
instructions to log in, or go to siriusxm.com.
If you do not have a subscription to the
SiriusXM All Access package, follow the
instructions on this unit to set up a username and
password and add streaming to your current
subscription for 30 days, at no cost.
SiriusXM account sign-in
To start using the SiriusXM service on this unit,
sign in to your account using the MusicCast
CONTROLLER app installed on your mobile
device. Follow the instructions on the app
screen.
Playback of SiriusXM content
Use the MusicCast CONTROLLER app installed
on your mobile device to select the SiriusXM
service.
If you do not have a SiriusXM subscription:
You will be offered a 30-day trial subscription to
the SiriusXM streaming service when you provide
your email and zip/postal code.
American and Canadian customers can also
contact SiriusXM by calling 1-888-539-7474 to
subscribe.
Your service will automatically stop at the end of
your trial unless you subscribe. If you do not wish
to enjoy your no-obligation trial, you can cancel it
by calling 1-866-635-2349. If you decide to
continue service after your trial, the
subscription plan you choose will
automatically renew thereafter and you will be
charged according to your chosen payment
method at then-current rates. Fees and taxes
apply. To cancel you must call us at 1-866-635-
SiriusXM and all related marks and logos are trademarks
of Sirius XM Radio Inc. and its subsidiaries. All rights
reserved.
eYAMAHA
YAMAHA CORPORATION
© 2015 Yamaha Corporation ZS95420
Supplement for Rhapsody®
The Rhapsody® service is available in the U.S.A. only.
Prohibition
• It is strictly prohibited to modify, reproduce, reverseengineer or use this unit and/or built-in software for use
other than audiovisual purposes.
Notes
• Configure basic settings for the MusicCast
CONTROLLER app before using the service.
• To use this function, the unit must be connected to the
Internet. For detail on connections and network
settings, refer to "Owner's Manual".
Rhapsody® account sign-in
To start using the Rhapsody® service on this unit,
sign in to your account using the MusicCast
CONTROLLER app installed on your mobile
device. Follow the instructions on the app
screen.
Playback of Rhapsody® contents
Use the MusicCast CONTROLLER app installed
on your mobile device to select the Rhapsody®
service.
The Rhapsody® service is the power behind the
Rhapsody® Media Player (the Rhapsody® player
software that you can download to your
computer). Rhapsody® service supplies the
music, keeps My Library up to date, provides
you with Rhapsody® channels, the Playlist
Central online community, and manages your
downloads. Your software connects to
Rhapsody® service through the internet.
Because your account information and
Rhapsody® content are on servers instead of any
individual computer, your music is infinitely
portable. Much of what you see in the Display
area comes from Rhapsody® service. What you
can do with Rhapsody® service depends on your
subscription.
You can use Rhapsody® service for free, or get
even more from a paid membership. The
Rhapsody® service also brings you Rhapsody®
Online, a streamlined, internet version of
Rhapsody® that you can access from almost
anywhere. Just sign in to your Rhapsody®
account to start letting the Rhapsody® service
work for you.
For more information,
http://www.rhapsody.com/
0Rhapsoo/
Rhapsody and the Rhapsody logo are registered
trademarks of Rhapsody International, Inc.
OYAMAHA
YAMAHA CORPORATION
© 2015 Yamaha Corporation ZS95440
Supplement for Pandora®
The Pandora service is available in the U.S.A., Australia
and New Zealand only.
Notes
• Configure basic settings for the MusicCast
CONTROLLER app before using the service.
• To use this function, the unit must be connected to the
Internet. For detail on connections and network
settings, refer to "Owner's Manual".
Pandora is a free, personalized Internet radio
service playing only music you love. Enter your
favorite artists or tracks and Pandora will bring
an effortless personal soundtrack into your living
room. Rate tracks as they play, because Pandora
caters to your tastes and adapts stations to your
feedback on the spot.
Pandora account sign-in
To start using the Pandora service on this unit,
sign in to your account using the MusicCast
CONTROLLER app installed on your mobile
device. Follow the instructions on the app
screen.
Playback of Pandora content
Use the MusicCast CONTROLLER app installed
on your mobile device to select the Pandora
service.
Since all Pandora accounts are portable, you
can always access your own personalized
Pandora stations from any computer or device in
the United States, Australia and New Zealand
that supports Pandora.
Pandora is currently only available within these
countries due to licensing restrictions.
Pandora is always free, with the option to
upgrade to Pandora One which is completely
free of all advertising and comes with additional
features.
For more information, http://www.pandora.com
Pandora, the Pandora logo, and the Pandora trade dress
are trademarks or registered trademarks of Pandora
Media, Inc. Used with permission.
eYAMAHA
MusicCast Setup Guide
II
Home Audio Network with MusicCast
MusicCast is a brand new wireless musical solution from Yamaha, allowing you to share music
among all of your rooms with a variety of devices. You can enjoy music from your smartphone, PC,
NAS drive and music streaming service anywhere in your house with one easy-to-use app. For more
details and a lineup of MusicCast compatible products, visit our website.
musiccasr
Key features
Seamlessly control all MusicCast compatible devices with the dedicated "MusicCast
CONTROLLER" app.
Link a MusicCast compatible device to another device in a different room and play them back
simultaneously.
Play back music from music streaming services. (The compatible music streaming services may
differ depending on your region and product. Refer to the product information on our website
for details.)
En
1
Setting Up
Preparation of the devices
Mobile device (smartphone, etc.)
To use the network features on the MusicCast compatible device, you need the
dedicated app "MusicCast CONTROLLER" for the operation. Search for the free app
"MusicCast CONTROLLER" on App Store (for iOS devices) or Google Play (for Android
devices) and install it to your device.
For details, refer to the instructions for this app in each store.
Connect the mobile device in which MusicCast CONTROLLER has been installed to the wireless
router in your home.
If your router supports multiple SSID's (network names), connect the mobile device to the first
access point ("SSID 1", etc.)
Setting of the devices and playback
Create the following network (MusicCast Network) using the MusicCast CONTROLLER app.
2
En
1
Turn on the MusicCast compatible device.
2
Tap the MusicCast CONTROLLER app icon on your mobile device and tap ~~setup."
Tip
If you have already connected a MusicCast compatible device to the network, tap "Settings" and then "Add New Device."
3
Operate the MusicCast CONTROLLER app following the onscreen instructions, then
press and hold the CONNECT button of the MusicCast compatible device (or the
remote control) for three seconds.
Refer to the Owner's Manual of each MusicCast compatible device for the CONNECT
button.
CONNECT
4
Set up the network
Operate the MusicCast CONTROLLER app following the onscreen instructions to set up
the network.
5
Operate the MusicCast CONTROLLER app to playback.
Tip
• If you want to install a MusicCast compatible device to a location that is out of range of the wireless router, connect
another MusicCast support device to the router with a network cable to extend the range (Extend mode).
Standard Mode
Extend Mode
• Depending on where it is placed, the MusicCast compatible device may not be able to play back a high-resolution audio
source. In this case, connect the device directly to the router with a network cable.
En
3
Troubleshooting
Refer also to the troubleshooting section in the relevant Owner's Manual for the MusicCast
compatible device.
Turn on the device.
The device is turned off.
Enable network standby on the device.
The device is not connected to the MusicCast
Connect the device with the MusicCast CONTROLLER
network.
app.
Connect the mobile device to the wireless router and
The mobile device is not connected to the wireless
start the MusicCast CONTROLLER app.
router at your home.
Disable the cellular data transmission.
Turn on the MusicCast compatible device.
The MusicCast compatible device is turned off.
Enable network standby on the device.
The network parameters (IP address) have not been
Enable the DHCP server function on your router.
obtained properly.
Connect all MusicCast compatible devices to the
The setting of the wireless router has been changed.
network with the MusicCast CONTROLLER app.
Connect the mobile device to the wireless router,
The mobile device is not connected to the wireless
and set the MusicCast compatible device with the
router at your home.
MusicCast CONTROLLER app again.
Turn on the device.
The MusicCast compatible device is turned off.
Enable network standby on the device.
For further information, please visit our website:
http://www.yamaha.com/musiccast/
MusicCast is a trademark or registered trademark of Yamaha Corporation.
Android and Google Play are trademarks of Google Inc.
iPhone, iPad and AirPlay are trademarks of Apple Inc., registered in the U.S. and other countries.
4
En
~tt!/Mi~
~-
MusicCast ~~*llib'Siib'W~t,'
MusicCast j-Jftt#i~O)~;l*~;t/~C::: LT
MusicCast ~iftt~~O)~;l*b";t7~C1J:-:JTL \g "
<tC.~L
\0
.:t '/ f. f]-? .::Z 5 / J\-{ ~ ;t / (~ ~)J) ~ c:: LT ( tc ~ L\ ,
I
-----j
1
!
MusicCast ~iftt~~fJ\ MusicCast
-*''/ r- f]-?~c:::
MusicCast CONTROLLER ~1~L \, t~*~ LT( tc~L \()
t~~~tlTL \t:L \ ~
MusicCast CONTROLLER ~fi~O)m~fJ'~~~L 'o
I t ; \-1 Ji.-!lilil*~ Jl.-- 9- ~LHHJ't
i
-t; \-{ Jvu#Tl*b' L:' ~&!O)Jv- 5 -~C:::t~*7C~tl TL \
t:L \
ltd~,
MusicCast
CONTROLLER c'~~:zEL T( tc~L \"
I -t; \-iJvft#T\*0)-tJ
± \
\-1Jv-T'-55m1~~~~1J~c L-r< tc.
I
[ MusicCast ~iftt~~O)~;l*b";t7~C1J:-:JTL \0 :
i jf', 'Y f-- f]- ? 'I'~¥~ (IP T ~, ~ ~J b" 1E L ( fl~ i~ ~ tl T
I
I
:
L\t:L \ ~
<S-3-~,
Jv-5-0)~~:zE:b'~~~ntco
MusicCast CONTROLLER c '9"'(TO)
MusicCast :xiftt#i~~ti~LT< tc~L \ 0
MusicCast CONTROLLER fJ'S MusicCast:~~-HfJ'llll~tl.~l, '~
!
1
I
I -t J\-{ Jvft#Tl*~ Jv- 5- ~c::::ti*~ Ltc1~\ MusicCast
-1::/ \-{Jvu#Tl*b'L:'~&!O)Jv-9-~c:ti*~~nTL\ CONTROLLER c'~~:AEL T( tc~L\o t~~O) SSID ~t~
-:JJv-5-~C:::fi~90±~!3~J:, MusicCast ~i»t~~c
[PJL SSID O);t'Y f--f]-?~c:::H~*~LT(tc~L\o
http://www.yamaha.com/musiccast/
MusicCast ~j:--\7~; \f>tit~f±O)ii~H!c' 9 ,
Android , GooglePiay ~j: Google Inc. O)pJjf!T9
iPhone, iPad, AirPlay ~j:, *~en J:: Lfi-0)1tSO)~I:z T~t-R~n Tl "~ Apple Inc. O)j'$jf!T9 iPhone j'$jf!~j:, ?
f±0)-71" -t /
"A(<=~-5,~15em~n Tl "*9-
1"
*
/f>tit~
YAMAHA CORPORATION
4
Ja
© 2015 Yamaha Corporation
ZS47140-1
YAMAHA CORPORATION
8YAMAHA
© 2015 Yamaha Corporation ZS95460
~
Supplement for Spotily
Spotify gives you instant access to millions of songs on your mobile devices. Just hit play to stream
anything you like .
The Spotify Connect feature lets you choose music on your Spotify app and listen on your Yamaha
home entertainment system.
See spotify.com for service area information .
Connect your device to your
home Wi-Fi network
Connect the unit and your mobile or tablet to
your home Wi-Fi network as shown in the
illustration below. All devices need to be on the
same network.
Network connection (example)
Internet
Playback of Spotify contents
Start Spotify app on your mobile or tablet device ,
log in to Spotify and start playing a track.
CD
Tap on the Now Playing bar to reveal extra
controls and tap the Speaker icon.
® Select the unit (network name of the unit) as
the audio output device.
Spotify app (example)
Modem
~~~
Mobile or tablet device'
* iOS/Android™ apps are available as of December 2013 .
For more details, visit spotify.com
D
• The playback screen is displayed on the TV connected to
the unit.
• To use this function, this unit and your mobile or tablet must
be connected to the Internet. For detail on connections and
network settings, refer to "Owner's Manual".
Get Spotify app and premium
free trial
Download the Spotify app for your mobile or
tablet from your app store , and take the Premium
free trial.
The Spotify app and Premium account are
required. Visit spotify.com for details.
www.spotify.com/connect
The Spotify Software is subject to third party
licenses found here:
https://developer.spotify.com/esd k-third-party-licenses/
Gspotify·
Spotify and Spotify logo are registered trademarks of the
Spotify Group.
eYAMAHA
Registering Your New Yamaha
Product is Fast and Easy
Thank you for purchasing a new product from Yamaha Electronics. We'd like to
continue providing you with high quality products and better service. So, we've made
it simple to register your new product purchase online. Please take a few minutes to
visit our website at www.yarnaha.com/YEC/registration/ and complete the
information and questions included there. We appreciate your business and we look
forward to hearing from you.
Failure to complete the registration form does not diminish your warranty rights in any way.
Product registration applies to USA customers only.
WF15740
OYAMAHA
Yamaha Worldwide Representative Offices
For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below.
Pour plus de details sur les produits, contactez votre representant Yamaha le plus proche de chez vous ou le distributeur agree indique ci-dessous.
NORTH AMERICA
CANADA
Yamaha Canada Music Ltd.
135 Milner Avenue, Tronto ON M1 S 3R1, Canada
U.S.A.
Yamaha Corporation of America
6600 Orangethorpe Ave., Buena Park, Calif. 90620,
U.S.A.
CENTRAL & SOUTH AMERICA
MEXICO
EUROPE
EUROPEAN COUNTRIES
Yamaha de Mexico S.A. de C.V.
Avenida lnsurgentes numero 1647,
Col. San Jose lnsurgentes, C.P. 03900,
Deleg. Benito Juarez, Mexico, D.F.
BRAZIL
Yamaha Musical do Brasil Ltda.
Rua Fidencio Ramos, 302 - Cj 52 e 54 - Torre B Vila Olimpia - CEP 04551-010 -Sao Paulo/SP
BRAZIL
Yamaha Music Europe GmbH
Siemensstrasse 22-34, 25462 Rellingen, Germany
RUSSIA
Yamaha Music (Russia)
Room 37, bid. 7, Kievskaya street, Moscow,
121059, Russia
AFRICA
Yamaha Music Gulf FZE
JAFZA-16, Office 512, P.O.Box 17328, Jabel Ali FZE,
Dubai, U.A.E
ARGENTINA
Yamaha Music Latin America, S.A.
Sucursal de Argentina
Olga Cossettini 1553, Piso 4 Norte
Madero Este-C1107CEK
Buenos Aires, Argentina
PANAMA AND OTHER LATIN
AMERICAN COUNTRIES I
CARIBBEAN COUNTRIES
Yamaha Music Latin America, S.A.
Torre Banco General, Piso 7, Urbanizaci6n Marbella,
Calle 47 y Aquilino de Ia Guardia,
Ciudad de Panama, Panama
As of January 2015
AVR01501A
Yamaha Corporation, Audio Products Sales and Marketing Division
Nakazawa-cho 10-1, Naka-ku, Hamamatsu, Japan 430-8650
t'~ I \~:ittiU
IZF73310-2I
1' 430-8650
~Riil~~f1rmt:P~t:P5RIHJ
10- 1
MIDDLE EAST
TURKEY/CYPRUS
Yamaha Music Europe GmbH
Siemensstrasse 22-34, 25462 Rellingen, Germany
ASIA
THE PEOPLE'S REPUBLIC OF CHINA
Yamaha Music & Electronics (China) Co.,Ltd.
2F, Yunhedasha, 1818 Xinzha-lu, Jingan-qu,
Shanghai, China
OTHER COUNTRIES
Yamaha Music Gulf FZE
JAFZA-16, Office 512, P.O.Box 17328, Jabel Ali FZE,
Dubai, U.A.E
INDIA
Yamaha Music India Pvt. Ltd.
Spazedge building, Ground Floor, Tower A, Sector
47, Gurgaon- Sohna Road, Gurgaon, Haryana, India
INDONESIA
PT. Yamaha Musik Indonesia (Distributor)
PT. Nusantik
Gedung Yamaha Music Center, Jalan Jend. Gatot
Subroto Kav. 4, Jakarta 12930, Indonesia
REPUBLIC OF KOREA
Yamaha Music Korea Ltd.
SF, 9F, Dongsung Bldg. 158-9 Samsung-Dong,
Kangnam-Gu, Seoul, Korea
MALAYSIA
Yamaha Music (Malaysia) Sdn., Bhd.
Lot 8, Jalan Perbandaran, 47301 Kelana Jaya,
Petaling Jaya, Selangor, Malaysia
SINGAPORE
Yamaha Music (Asia) PRIVATE LIMITED
Blk 202 Hougang Street 21, #02-00,
Singapore 530202, Singapore
TAIWAN
Yamaha Music and Electronics Taiwan Co., Ltd.
2F., No.1, Yuandong Rd. Banqiao Dist.
New Taipei City 22063 Taiwan
THAILAND
Siam Music Yamaha Co., Ltd.
3, 4, 15, 16th Fl., Siam Motors Bldg.,
891/1 Rama 1 Road, Wangmai, Pathumwan,
Bangkok 10330, Thailand
VIETNAM
Yamaha Music Vietnam Company, Limited
15th Floor, Nam A Bank Tower
201-203 Cach Mang Thang Tam St., Ward 4, Dist.3,
Ho Chi Minh City, Vietnam
OTHER COUNTRIES
Yamaha Corporation, Business Planning Div.
Area Business Development Department
Nakazawa-cho 10-1, Naka-ku, Hamamatsu,
Japan 430-8650
OCEANIA
AUSTRALIA I NEW ZEALAND
Yamaha Music Australia Pty. Ltd.
Level 1, 99 Queensbridge Street, Southbank,
Victoria 3006, Australia
~·,q~·,q~·,q~,q~·,q~·~~·,q~":9~·.o~~S>;;«~·,q~·ti.~9.~.0~"'9';'<1~S>~S>.·,q~·ti."'~9::<1i'~·~~-q"'·ti.~ti.~'~9;:~~·,q.,-.o~~~·.o~·;q~·~~~ S>.·,q"'.o\>.'-<i~<IS>.'o<IS>.'.O~~~ ~~)lo~ S>.·... ~-q
~~~~~?~~~~?..s~..s~?..s~~..Si'>~~..s~..s~?..S~~..s~..s~~~~~~~~~..s~..s~~..S~..S~..S~i'>~;;.~..s~..s~~~~~..s~~~~?~~~~~..s~~..s~~~~i!>.'%~~~~~~~~~:...;~-:..s~~~~:..s
~
~
~~
~~
~
~~
~~l
~
~l
~~
~
~~
i~
~l
~
o:.~
~
~
1
~1
~'9.
0:.~
~
~:~
~
~
~:~
~
t?~
~1
~
~~1
~~
~l
~
~:~
i'>~..S
~
~~~
t?~
t?~
t~l
t!l
~.~
~
t?~
t?~
~~
t~~
t~~
t~~
~
t;-9.
t~~
t~~
t!1
t~~
t~~
~
~~
t?l
~~
~~
t~1
~
~
~
~
§
GAMl'ITliEDE§AJPIPAREliL§
§TEREOJPHONliQuJE§ YAL\1AHA ~
~
Yamaha Canada Musique Ltee., garantit a l'acheteur original ses appareils stereophoniques contre toutes
defectuosites de materiaux et de main-d'ceuvre, selon les conditions ci-dessous:
Duree de validite de Ia garantie a
partir de Ia date d'achat originate
Appareils
* Recepteurs, amplificateurs, syntoniseurs, lecteurs de disque compact, projecteur de son
numerique, ensembles de haut-parleurs et caissons de graves achetes separementr. ..... ........................ 2 annees
~~
~~
~
t!~
t?l
t!~
~
~
i'>~~
~
~
t!~
a
~
~
~
r.(
~
~(
~~~
~~
* Lecteurs de DVD, enregistreurs de CD, lecteurs de disque Bluray,
lecteurs de musique reseau et gestionnaires, radios-reveils, ensembles de
haut-parleurs iPod, haut-parleurs multimedias, casques d'ecoute, ecouteurs,
systemes integres (recepteur ou amplificateur combine a ou sur le meme
bati qu'un lecteur de disque optique et haut-parleurs inclus), accessoires .......................... .............. ...... I annee
* Cartouche a Lampe pour le Projecteur ........................................................................ ...... ...................
180 jours
Sous reserve des conditions stipulees ci-apres, Yamaha Canada Musique Ltee., s'engage a reparer
gratuitement, incluant les pieces et Ia main-d'ceuvre, ses appareils stereophoniques devenant defectueux au
cours de Ia duree de Ia garantie applicable.
CONDITIONS:
I. Les appareils defectueux doivent etre retournes, accompagnes d ' une description complete de Ia
defectuosite et Ia facture d'achat, a un centre de service Yamaha autorise.
2. Le transport, I' emballage et I' assurance sont a Ia charge du proprietaire.
3. La presente garantie ne s'etend pas a l' entretien normal des appareils et est assujettie a leur maintien
en bon etat, conformement au mode d'entretien reproduit dans Ie manuel d' instructions.
4. Exclus de Ia presente garantie:
a) les dommages materiaux resultant d'un abus d 'emploi;
b) les avaries survenues en cours d'cxpedition;
c) les elem e nts exigean t un e ntretien periodique, par exe mpl e les ampou les, les courroies
d' entralnement, Ie nettoyage des tetes enregistreuses et Ia lubrification ;
d) le grillage des bobines mobiles aux haut-parleurs des mediums et des aig us (entralnes par le
fonctionnement des amplificateurs au-deJa de Ia puissance nominale);
e) le grillage des bobines mobiles aux haut-parleurs des graves (resultant d' une suralimentation des
haut-parleurs par leur fonctionnement a des niveaux d' alimentation superieurs a leur capacite);
f) les verifications de rendement;
g) les fils d' interconnexion et les antennes FM;
h) les fusibles qui brCilent par suite d ' une utilisation incorrecte.
5. Cette garantie ne couvre pas les produits qui ont ete alteres ou repares autre que par un centre de
service autorise Yamaha Audio, ou les appareils dont Ia marque de fabrique, le nom du fabrican t, le
numero de modele et le numero de serie ont ete alteres ou enlcvcs.
6. LA GARANTIE NE COUVRE QUE LES APPAREILS A L' ETAT NEUF VENOUS PAR DES
CONCESSIONNAIRES AUTORISES DE YAMAHA AUDIO AU CANADA, SOUS RESERVE
QUE L' ACHETEUR ORIGINAL EN FASSE UNE UTILISATION NORM ALE.
7. La garantie ne couvre pas le appareils stereophoniques de Yamaha Canada Musique Ltee., vendus en
Saskatchewan et auxquels s' appliquent les garanties reglementaires pre vues par Ia loi intitulee "The
Consumer Products Warranties Act. 1977" (Saskatchewan).
R. Cette garantie ne peut s' cxercer dans les territoires ou elle est interdite par Ia loi.
0:.~
t~~
~
~l
~
~.
~
~
~
~'9.
"'·~
~
"'~
~
~
t:~
~
t~l
~~
~
~
~l
~l
~
t~
i'>'!. S
~
t~~
~~
~
~~
~l
~
~
t~
~
;t:(
~!~
~l
;t:(
~
~
~~
~l
~l
~~
~~
~
f.~
;r.~
~
~~
~l
~
~
~l
Adresses des centres de service principaux:
1 35 Milner Avenue, Scarborough, Ontario, Ml S 3Rl.
Tel:(416)298-1311
~l
~l
Pour connaitre l'adresse des autres centres de service Yamaha, renseignez-vous
aupres d'un concessionnaire d'appareils stereophoniques Yamaha au communiquez
avec l'un des centres ci-dessus.
~
~!l
~l
~l
~
~
LA CARTE DE GARANTIE N'EST PAS REQUI SE.
PRIERE DE CONSERVER VOTRE FACTURE COMME PREUVE D' ACHAT EN CAS DE TOUTES
REPARATIONS EFFECTUEES SOUS LA GARANTIE.
~..s
W VAMAHA
~
t~t?lt~n~~t!n~n~n~~t~:n~lt~n~n~n~t~~n~l~~l
~
~ 1J
~
~
~l
010394 ~l
~!l:~n!n~n~~~t~~~:~~~n!:~~t~~n~t~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~
~
~
~
~
~
~
~
~
~ v-_,. A ~!If A H A
~Rru~~
AUDlTo
w~ A 10> 10>
R
A ~ Jl'lT'I"V
~RU~~RR
~
@.L
~
~
~
-
Yamaha Canada Music Ltd. warrants to the original purchaser of its audio products that such products are
free from defects in workmanship and materials as follows:
~~
~
~
~
~
~
~
Product
~
~
~1
lf~
lf.~
~~
~
Speaker Systems and Subwoofers purchased individually ...................................................................... 2 years
~
~~
* DVD Players, CD Recorders, Btu-ray Disc Players, Network Music Players and
~
~~
~
~
~
~
~
Commanders, Clock Radios, iPod Speaker Systems, Powered Multimedia Speakers,
Headphones, Earphones, Integrated Systems (Receiver or Amplifier combined or
on same chassis with an Optical Disc Player along with any included Speakers), Accessories ............... l year
* Lamp Cartridge for Projectors ...................... ... ..... .................. ................................ ............ ...................
~l
Subject to the following terms and conditions if any Yamaha Canada Music Ltd. audio products become
defective during the applicable warranty period. Yamaha Canada Music Ltd. will repair such product without
charge, including both parts and labour.
~
~
* Receivers, Amplifiers, Tuners, Compact Disc Players, Digital Sound Projectors,
~
~
~
~
~
~
f;]
~~
Warranty Period from date
of Original Purchase
~
l'l
~
180 days
~
~
~
f.l
~
~~
~
~~
~,..;
~
~
~l
lfl
~~
b="..-6
J.:
~-~
"""
~
~~
~
~l
~
~
~~l
~
lf~
lfl
~~
lfl
~
:!:
~
:!l
~~1
~.;-q,
~l
~?:
~-~
"'""
~
:!l
~
~~1
:!l
:!l
~
:~l
~~l
~
~l
~
~l
:!l
~
~
Terms and Conditions:
~
;~
I. Defective units must be returned to an authorized Yamaha Audio Service Centre together with a
complete description of the defect, and Bill of Sale.
2. Any transportation, packing and insurance arrangements are the responsibility of the owner.
3. This warranty does not cover normal maintenance of the products and is subject to the products being
properly maintained in accordance with the maintenance instructions contained in the Yamaha
Owner's Manual.
4. This Warranty does not cover:
a) Physical damage due to abuse:
b) Shipping damage.
c) Normal maintenance items such as: light bulbs, drive belts, dirty tape heads, lubrication.
d) Burned voice coils on tweeter and midrange speakers (caused by amplifier chipping, i.e. operation
of amplifier beyond rated wattage.)
e) Burned voice coils on woofers (caused by overpowering the speakers, i.e. operation of amplifier at
power levels beyond speaker capability).
f) Performance checks.
g) Interconnection cables and FM antennas.
h) Blown fuses caused by improper operation.
5. This warranty does not cover products which have been altered or repaired other than by a n
authorized Yamaha Audio Se rvice Centre, or products whose trademark name, model, or serial
number have been altered or removed.
6. THIS WARRANTY COVERS ONLY NEW AND UNUSED MERCHANDISE SOLD BY
AUTHORIZED YAMAHA AUDIO DEALERS IN CANADA, AND SUBJECTED TO NORMAL
CONSUMER USE, BY THE ORIGINAL PURCHASER.
7. This warranty does not apply to Yamaha Canada Music Ltd. audio products sold in Saskatchewan,
and to which statutory warranties contained in The Consumer Products Warranti es Act, 1977
(Saskatchewan) are applicable.
8. This warranty is void where prohibited by law.
~,..;
~
~.;-q,
~~
[~
~~
~!..S
~~
~
~
~~
~l
~
~~
~~
~!~
N
~l
lfl
~~l
f.~
~~l
~~~
~
:!~
f.l
re-q,
~l
t.~
~-~
~~
~
~
~
Factory Service Centres are located at:
135 Milner Avenue, Scarborough, Ontario, M1 S 3R1.
(416)298- 1311
~
~~
~!l
~
:!l
t!l
For the location of other service centres, contact any Yamaha Audio Dealer or one of
the above.
~
A WARRANTY REGISTRATION CARD IS NOT REQUIRED.
~~
~
lfl
PLEASE KEEP YOUR BILL OF SALE AS PROOF OF PURCHASE SHOULD WARRANTY REPAIRS BE
REQUIRED.
~
:!:
~,..;~~,..;~~~~~)J.~..Sb-~..S)J.!...;;;.~,..;b-~...;b-~~b-~~)J.!~)J.!~b-!..S)J.~~b-!...;)J.!~
----~~~~~--~~----
GYAMAHA
, •
!
~l
~
i:
-------~-~-----~~
010394
~~~ili!...Si¢...S~!..sb-!..s~'kib-'ki-~'!<!ib-~~..S~'kib-~b-~..S!¢.~b-:'~~..s
WT55060
OYAMAHA
LIMITED WARRANTY ON
HOME AUDIO PRODUCTS
Thank you for selecting a YAMAHA product YAMAHA products are designed and manufactured to provide a high level of defect-free performance. Yamaha
Corporation of America ("YAMAHA") is proud of the experience and craftsmanship that goes into each and every YAMAHA product. YAMAHA sells its
products through a network of reputable, specially authorized dealers and is pleased to offer you, the Original Owner, the following Limited Warranty, which
applies only to products that have been (1) directly purchased from YAMAHA's authorized dealers in the USA, including Puerto Rico (the "Warranted Area")
and (2) used exclusively in the Warranted Area. YAMAHA suggests that you read the Limited Warranty thoroughly, and invites you to contact your authorized
YAMAHA dealer or YAMAHA Customer Service if you have any questions.
THIS WARRANTY COVERS THE LISTED PRODUCTS AGAINST DEFECTS IN MATERIALS OR
WORKMANSHIP FOR THE NUMBER OFYEARS IDENTIFIED BELOW.
Warranty Term
Duration of Warranty from Date of
Purchase by or for the Original Owner
Type of Product
AIV and Stereo Receivers, Processor and Integrated Amplifiers,
Separate Amplifiers and Preamplifiers, Tuners, CD Players and
Changers, HDD Players and Recorders, Network Players, Powered
Loudspeakers, Media Controllers and Speaker Systems purchased
individually, as a pair, or as part of an Integrated or Packaged System.
·····················-·· 2 years
Cassette Decks, Blu-ray Disc Players, DVD Players and Changers,
Integrated Systems (Receiver or Amplifier combined or on same
chassis with CD, DVD or Blu-ray Disc Player}, Desktop Audio Systems
(i.e. TSX and PDX Series), Multimedia Speakers, Headphones,
Earphones and Accessories.
........ -.......... _.. __ 1 year
Coverage: YAMAHA will, at its option, repair or replace the product covered by this warranty if it becomes defective, malfunctions or otherwise fails to
conform with this warranty under normal use and service during the term of this warranty, without charge for labor or materials. Repairs may be
performed using new or refurbished parts that meet or exceed YAMAHA specifications for new parts. If YAMAHA elects to replace the product, the
replacement may be a reconditioned unit. You will be responsible for any installation or removal charges and for any initial shipping charges if the
product(s) must be shipped for warranty service. However, YAMAHA will pay the return shipping charges to any destination within the USA if the repairs
are covered by the warranty. This warranty does not cover (a) damage, deterioration or malfunction resulting from accident, negligence, misuse, abuse,
improper installation or operation or failure to follow instructions according to the Owner's Manual for this product; any shipment of the product (claims
must be presented to the carrier); repair or attempted repair by anyone other than YAMAHA or an authorized YAMAHA Service Center; (b) any unit which
has been altered or on which the serial number has been defaced, modified or removed; (c) normal wear, battery or battery replacement and any periodic
maintenance; (d) deterioration due to perspiration, corrosive atmosphere or other external causes such as extremes in temperature or humidity; (e)
damages attributable to power line surge or related electrical abnormalities, lightning damage or acts of God; (f) RFI/EMI (Interference/noise) caused by
improper grounding or the improper use of either certified or uncertified equipment, if applicable; or (g) interference arising from the use of wireless
communication devices (e.g. 2.4 gHz cordless telephones), or other radio frequency emitting products such as microwave ovens, whether such
interference impairs the operation of the product or vice-versa. Consult the Owner's Manual for guidance on set-up procedures for minimizing the risks of
interference. Any evidence of alteration, erasing or forgery of proof-of-purchase documents will cause this warranty to be void. This warranty covers only
the Original Owner and is not transferable.
In Order to Obtain Warranty Service: Warranty service will only be provided for defective products within the Warranted Area. Contact your
local authorized YAMAHA dealer who will advise you of the procedures to be followed. If this is not successful, contact YAMAHA at the address,
telephone number or website shown below. YAMAHA may request that you send the defective product to a local authorized YAMAHA Servicer or
authorize return of the defective product to YAMAHA for repair. For products requiring in-home service, contact your local authorized Yamaha dealer to
arrange for service. If you are uncertain as to whether a dealer has been authorized by YAMAHA, please contact YAMAHA's Service Department at the
number shown below, or check Yamaha's website at http://usa.yamaha.com. Product(s) shipped for service should be packed securely and must be
accompanied by a detailed explanation of the problem(s) requiring service, together with the original or a machine reproduction of the bill of sale or other
dated, proof-of-purchase document describing the product, as evidence of warranty coverage. Should any product submitted for warranty service be
found ineligible therefore, an estimate of repair cost will be furnished and the repair will be accomplished only if requested by you and upon receipt of
payment or acceptable arrangement for payment.
Limitation Of Implied Warranties and Exclusion Of Damages: ANY IMPLIED WARRANTIES, INCLUDING WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE SHALL BE LIMITED IN DURATION TO THE APPLICABLE PERIOD OF TIME SET
FORTH ABOVE. YAMAHA SHALL NOT BE RESPONSIBLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OR FOR DAMAGES BASED UPON
INCONVENIENCE, LOSS OF USE, DAMAGE TO ANY OTHER EQUIPMENT OR OTHER ITEMS AT THE SITE OF USE OR INTERRUPTION OF
PERFORMANCES OR ANY CONSEQUENCES. YAMAHA'S LIABILITY FOR ANY DEFECTIVE PRODUCT IS LIMITED TO REPAIR OR REPLACEMENT
OF THE PRODUCT, AT YAMAHA'S OPTION. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR
THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT
APPLY TO YOU. This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state. This is the only express
warranty applicable to the product specified herein; Yamaha neither assumes nor authorizes anyone to assume for it any other express warranty.
If you have any questions about service received or if you need assistance in locating an authorized YAMAHA Servicer, please contact:
OYAMAHA
CUSTOMER SERVICE
Yamaha Corporation of America
6600 Orangethorpe Avenue, Buena Park, California 90620-1373
Telephone: 800-292-2982
http://usa.yamaha.com
Do not return any product to the above address without a written Return Authorization issued by YAMAHA.
©2012 Yamaha Corporation of America
04/2012 ZE38290
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement