null  null
luxCONTROL lighting control systems
Overview
Product / function matrix
Page 387
Product information
luxCONTROL lighting control systems
Page 388
DALI sensors
Multi-sensor for DALI system
DALI MSensor 02
Page 390
IR SMART Controller
Page 391
DALI RC
Page 391
DALI control units
Control module with switch input
DALI GC / DALI GC-A
Page 392
DALI SC / DALI SC-A
Page 393
DALI MC
Page 394
Operating and control units
DALI TOUCHPANEL 02
Page 395
x/e-touchPANEL 02
Page 396
Sequencer module for DALI systems
DALI SQM
Page 397
DALI power supply
DALI PS
Page 398
DALI PS2
Page 399
DALI PS2 standby
Page 400
DALI PS1
Page 401
DALI interface
PC interface module for DALI systems
DALI USB
Page 402
Converter for DALI signals
DALI DSI
Page 403
DALI DSI II
Page 404
DALI Repeater
Page 405
Control module for Somfy motor control unit
Page 406
luxCONTROL lighting
control systems
DALI Somfy animeo interface
Catalogue 2012
www.tridonic.com
381
luxCONTROL lighting control systems
proDIM
Cluster Controller
Page 407
proDIM XC
Page 408
DALI actuator
DALI control module for 3 relays
DALI 3-RM-C
Page 409
DALI RM/S 4 x 10 A
Page 410
Leading-edge and trailing-edge phase dimmers
with automatic load detection
DALI PCD 300 one4all
Page 411
DALI PCD/S
Page 412
SMART sensors
Ambient light sensor and presence detector for constant lighting control
SMART Sensor 5D 19f
Page 413
SMART Sensor 5DP 19f
Page 416
SMART Sensor 5DPI 19f
Page 419
SMART Sensor 10DPI 19f
Page 422
basicDIM
Ambient light sensor and motion detector for constant lighting control
basicDIM RCL
Page 425
basicDIM RCL DBC
Page 428
DSI SMART PTM
Page 431
smartDIM SM lp
Page 433
DSI control units
Modular lighting control for 3 DSI channels
modularDIM Basic
Page 436
modularDIM SC (accessory for Basic)
Page 437
modularDIM DM (accessory for Basic)
Page 438
modularDIM LC (accessory for Basic)
Page 439
Control module with input for infra-red receiver and one-way switch
DSI-IR
Page 440
DSI-2IR
Page 441
Control module for amplifying DSI signals and switch input
Page 443
luxCONTROL lighting
control systems
DSI-V/T
Automatic switching depending on presence and light value
Smart SWITCH II
Catalogue 2012
www.tridonic.com
Page 444
383
luxCONTROL lighting control systems
DSI interface
Converter for 1…10 V to DSI signals
DSI-A/D
Page 445
DSI-A/DS
Page 446
Converter for KNX- and LON- to DSI signals
KNX DSI/S 6CH
Page 447
LON DSI/S 6CH
Page 448
DSI actuator
Leading-edge and trailing-edge phase dimmers 40-1,000 VA with preset
DSI-PCD/S
Page 449
Relay module for switching ohmic loads
Page 450
Wiring diagrams and installation examples
Page 451
luxCONTROL lighting
control systems
DSI-RK
Catalogue 2012
www.tridonic.com
385
luxCONTROL lighting control systems
Overview
DALI
DALI sensors
DALI MSensor 02
Page 390
DALI control modules
DALI GC/GC-A
Page 392
DALI SC/SC-A
Page 393
SMART interface
Switching contact
Type of mounting: surface-mount
Type of mounting: built-in
•
Time-controlled daily processes (scheduler)
•
Automatic scene control (sequence)
•
Tunable white
•
Page
DALI MC
Page 394
DALI TOUCHPANEL 02
Page 395
DALI x/e-touchPANEL 02
Page 396
DALI SQM
Page 397
SMART
SMART Sensor
Page 413
basicDIM
basicDIM RCL
Page 425
basicDIM RCL DBC
Page 428
DSI-SMART PTM
Page 431
smartDIM SM lp
Page 433
modularDIM
Page 436
DSI-V/T
Page 443
DSI-A/D
Page 445
Smart SWITCH II
Page 444
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
luxCONTROL lighting
control systems
Sensor
Remote control
Type
Daylight control / ambient light control
Category
Motion detection
System
Presets / scenes
Manual dimming
Product / function matrix
Catalogue 2012
www.tridonic.com
387
luxCONTROL lighting control systems
Product information
luxCONTROL lighting control systems
Intelligent lighting control
The right light in the right amount at the right place
– this saves energy and creates an individual level of
lighting comfort that promotes a feeling of well-being.
luxCONTROL components from Tridonic provide the
basis for innovative and tailor-made lighting solutions
in which maximum energy efficiency is combined with
optimum functionality for the specific application.
luxCONTROL represents the next generation of lighting
management for modern lighting systems with
daylight-dependent control, spectacular lighting
moods and impressive colour chases.
Intelligent luxCONTROL systems are characterised
by the optimum interplay of controller, sensors,
controls, electronic ballasts and lamps. They are
perfectly tailored to work with digital dimmable
PCA EXCEL one4all, PCA ECO and PCA BASIC
ballasts, TE one4all electronic transformers, digital
PCI FOX ballasts, T converters for LED modules
and EM PRO emergency lighting units.
Task-specific lighting management
With luxCONTROL all the lighting tasks are performed
with the versions that are ecologically, economically
and functionally the most attractive. Integrated
solutions enable manufacturers to produce costeffective energy-saving luminaires. Lighting planners
and installers can use the right configuration based
on an extensive range of equipment to suit the specific
task and the required lighting design.
Ballasts from Tridonic: the simplest form
of lighting management
switchDIM applications use the mains voltage as
the control signal for the digital dimmable ballasts
from Tridonic. This is the simplest form of lighting
management, which makes switchDIM uncomplicated,
cost-effective and extremely user-friendly. Only simple
conventional mains voltage switches are therefore
needed to dim and switch the lighting system from
several locations. For more information go to page 73.
Safe passage with integrated
corridorFUNCTION
In presence-controlled lighting systems the
corridorFUNCTION integrated in dimmable ballasts
from Tridonic provides a new level of energy efficiency,
safety and comfort. Instead of being switched-off
abruptly if no movement is detected in stairwells,
corridors, underground car parks or entrance halls,
the lighting is dimmed to a low level and then
switched-off after a delay of one minute. As soon as
someone enters the room the light is switched back
up to its full level.
Tried and tested DSI technology ( Digital Serial
Interface ) and the DALI interface protocol ( Digital
Addressable Lighting Interface ) offer impressive
flexibility – from individual intelligent luminaires
and large room installations to lighting concepts
for buildings that can even be linked to emergency
lighting systems to provide a total package.
corridorFUNCTION – huge benefits in terms of energy efficiency, safety and comfort. Within
a user-definable time window ( fade-off time ) the lighting is dimmed to a low level ( B ) and
switched-off after a certain dwell time ( C ). Alternatively the lighting can remain at this low
background level.
388
www.tridonic.com
Catalogue 2012
luxCONTROL lighting control systems
Product information
SMART sensors – elements of a cost-effective
constant lighting solution
Simple, cost-effective and energy-efficient constant
lighting systems can be produced on the basis of
digital dimmable PCA EXCEL one4all, PCA ECO and
PCA BASIC, ballasts. SMART sensors, which are
connected to the ballasts via the Tridonic SMART
Interface, register the available ambient light or the
presence of a person in the room. The level of light
can be regulated to a user-defined constant light value
or the luminaire can be switched-off if there is no-one
in the room.
also open up new opportunities for developing
high-quality lighting solutions because the various
parameters can be easily programmed. With
comfortDIM it is also possible for external systems
such as louvre blind controllers to be integrated in
the overall concept.
The compact components are easy to integrate,
enabling luminaire manufacturers to offer products
with added intelligence without having to compromise
on the freedom of optimum design. Further control
inputs on the ballast enable the luminaires to be
integrated in a complete lighting system.
Networked solutions
The proDIM light management solution based on
the Cluster Controller combines standardised DALI
technology with the tried and tested TCP/IP internet
protocol. This means that the lighting control system
can be fully integrated in a building management
system so everything can be controlled centrally
with just one system.
DALI – the established standard
DALI enables up to 64 digital dimmable ballasts with
one4all interfaces to be individually addressed on a
single line, 16 groups to be assigned and 16 lighting
scenes to be programmed. Regrouping is possible at
any time without the need for costly rewiring, for example after renovation or a change of function for a room.
With individual addressability and status feedback,
the DALI-based comfortDIM lighting control systems
not only offer top-quality monitoring functions but
Catalogue 2012
Intelligent emergency lighting system
Compact emergency lighting systems for up to
120 individually addressable DALI emergency lighting
units are easily implemented with e-touch. The status
report for the emergency lighting system can be
retrieved locally via an infra-red interface or in a networked installation with EM LINK software ( available
free of charge ) via a standard web browser ( TCP/IP ).
Technical information
The latest technical information is available on the
internet at: www.tridonic.com, menu “Technical data”,
submenu “Data sheets”
Personal enquiries
A form for personal enquiries is available on
the internet at www.tridonic.com, menu “Contact”,
submenu “Contact form”
www.tridonic.com
389
luxCONTROL lighting
control systems
DSI – simply functional
To optimise the energy consumption of extensive
groups of luminaires, for example in sports stadiums
or factories, there are solutions based on the
modularDIM system and the DSI digital interface.
The attractive functions of a DSI lighting management
system include simple programming of scenes and
the option of common routing of the control line
and mains power supply cabling in one duct. Digital
transmission means no problems of interference
and an identical dimming value for all the luminaires.
Other functions that have been implemented by
Tridonic in ballasts with one4all interfaces and that
go beyond the DALI standard contribute to greater
lighting comfort and even greater energy savings.
NEW
luxCONTROL lighting control system
DALI sensors
DALI MSensor 02
Multi-sensor for DALI system
Product description
• Component of the comfortDIM system (DALI standalone)
• With ambient light dependent control and presence detection
• Simple group assignment via rotary switch
• Multiple MSensors possible in a group
• Can be remote controlled
• Lighting control and presence detection can be deactivated
• Individual adjustment of the parameters with coniguration software
• Multi-master compatible: Multiple control modules
Fig. 1
are possible in a DALI system
• Power supply via DALI line
Ê
For product data sheet go to www.tridonic.com,
or available on request
Technical data
Operating temperature
0 ... +50 °C
Storage temperature
-25 ... +55 °C
Type of protection
IP20
Ø 86
5
DALI cable
6 mA from DALI
46
Supply via
Current draw
Fig. 2
È
Product matrix, page 387
Wiring diagrams and installation examples, page 451
Fig. 3
Fig. 4
Ordering data
390
Type
Article number
DALI MSensor 02 5DPI 41f Luminaire installation
86459305
Figure
1
Packaging, carton
1 piece
DALI MSensor 02 5DPI 41rc Ceiling installation
86459303
2
1 piece
DALI MSensor 02 5DPI 41w Box installation
86459304
3
1 piece
DALI MSensor 02 5DPI 41rs Surface mounting
86459302
4
1 piece
www.tridonic.com
Catalogue 2012
luxCONTROL lighting control system
DALI sensors
Speciic technical data
Detection
Type
Ø of detection range,
mounted at a height of 2.5 m
Extension of the
detection area1
Swivel design
Swivel range
Detection angle
Light measurement
at the sensor head2
Infra-red
control range
DALI MSensor 02 5DPI 41f
5m
–
no
0°
360°
10 – 650 lx
5m
DALI MSensor 02 5DPI 41rc
5m
2m
yes
±15°
360°
10 – 650 lx
5m
DALI MSensor 02 5DPI 41w
5m
2m
yes
±15°
360°
10 – 650 lx
5m
DALI MSensor 02 5DPI 41rs
5m
–
no
0°
360°
10 – 650 lx
5m
ACCESSORIES
1 If mounted at a height of 2.5 m and swivelled through 15 °.
2 The measured value at the sensor head corresponds to approx. 15 to 2,000 lux on the surface measured.
DALI RC
Product description
• Optional infra-red remote control
• Switching on and of (On/Of button)
• Dimming (Up/Down button)
• Activating automatic lighting control (sun/cloud button)
• Calling up two scenes
• Calling up ive ixed light output values
(100, 50, 25, 12 and 6 %)
Ordering data
• Individual adjustment of the button assignments
with coniguration software
Type
Article number
Packaging, carton
DALI-RC
86458263
1 piece
• Setting the threshold control point
ACCESSORIES
• With wall bracket
IR SMART Controller
Product description
• Optional infra-red remote control
luxCONTROL lighting
control systems
• Switching on and of (On/Of button)
• Dimming (Up/Down button)
• Activation of automatic lighting control (Automatic button)
• Setting the threshold control point (Set button)
Ordering data
Catalogue 2012
Type
Article number
Packaging, carton
DSI-SMART Controller
86451922
1 piece
www.tridonic.com
391
luxCONTROL lighting control system
DALI control units
DALI GC / DALI GC-A
Control module for 2 DALI groups
Product description
• Control module for standard momentary-action switch
• For sending dimming and switching commands
to two DALI groups
• 2 momentary-action switch inputs
• DALI GC only: DALI devices can be addressed and
assigned by means of a simple key sequence
• Rotary switch for selecting groups 1 – 16 or “broadcast”
• Multi-master compatible: Multiple control modules
11
are possible in a DALI system
• Power supply via DALI line
41
Note
3
3
• Wires to momentary-action switches must not be extended
Ê
30
For product data sheet go to www.tridonic.com,
30
or available on request
Technical data
Supply via
DALI cable
Current draw
6 mA from DALI
Input, 2 momentary-action switches
1-way / 2-way
Ordering data
Output
DALI
Ambient temperature ta
0 ... +50 °C
Type
Article number
Packaging, carton
Type of protection
IP20
DALI GC
24033450
1 piece
DALI GC-A
24138907
1 piece
È
Product matrix, page 387
Wiring diagrams and installation examples, page 451
392
www.tridonic.com
Catalogue 2012
luxCONTROL lighting control system
DALI control units
DALI SC / DALI SC-A
Control module for 4 DALI lighting scenes
Product description
• Control module for standard momentary-action switch
• For calling up lighting scene values in DALI devices
• 4 momentary-action switch inputs
• DALI SC only: Lighting scene values in DALI devices
can be programmed by means of a simple key sequence
• Rotary switch for selecting 4 DALI scenes 1 – 16
• Multi-master compatible: Multiple control modules
are possible in a DALI system
11
• Power supply via DALI line
Note
• Wires to momentary-action switches must not be extended
Ê
41
For product data sheet go to www.tridonic.com,
30
3
3
or available on request
Supply via
DALI cable
Current draw
6 mA from DALI
Input, 4 momentary-action switches
single
Output
DALI
Ambient temperature ta
0 ... +50 °C
Type of protection
IP20
30
Technical data
Ordering data
È
Type
Article number
Packaging, carton
DALI SC
24034263
1 piece
Product matrix, page 387
DALI SC-A
24138906
1 piece
luxCONTROL lighting
control systems
Wiring diagrams and installation examples, page 451
Catalogue 2012
www.tridonic.com
393
luxCONTROL lighting control system
DALI control units
DALI MC
Control module with 4 freely programmable inputs
Product description
• Control module with 4 inputs
• User-deinable switching modes
• Each input can be individually set
• Objective: Setting individual addresses 1 – 64,
groups 1 – 16 or “broadcast”
• Multi-master compatible: Multiple control modules
are possible in a DALI system
• Sequencer for 4 scenes
• Stairwell function with 2 dimming levels
• Power-up function for sending a preset command after a delay
14
• Power supply via DALI line
Ê
For product data sheet go to www.tridonic.com,
or available on request
40
28
Technical data
Input
4 momentary-action switches or relays
Output
DALI
Ambient temperature ta
0 ... +50 °C
Type of protection
IP20
R8
28
DALI cable
6 mA from DALI
←
Supply via
Current draw
È
Product matrix, page 387
Wiring diagrams and installation examples, page 451
394
Ordering data
Type
Article number
Packaging, carton
DALI MC
86458507
1 piece
www.tridonic.com
Catalogue 2012
NEW
luxCONTROL lighting control system
DALI control units
DALI TOUCHPANEL 02
Operating and control unit
Product description
• Control panels and controllers for DALI systems
• For controlling multiple luminaire groups
and calling up preset lighting scenes
• Flexible design: individual design can be used
• Multi-master compatible: Multiple control modules
are possible in a DALI system
• Power supply via DALI line
• Individual adjustment of the control panel
and button assignments with coniguration software
• Setting group addresses 1 – 16 or “broadcast”
• Setting scene addresses 1 – 16
• Tunable white (device type 8) capable
For product data sheet go to www.tridonic.com,
12,5
Ê
60
94
111,5
or available on request
Supply via
DALI cable
Current draw
6 mA (max. 10 mA im service mode)
Output
DALI
Ambient temperature ta
0 ... +50 °C
Protection class
IP20
49,5
Technical data
60
64,5
82,5
È
8
17
Product matrix, page 387
Ordering data
Type
Article number
Packaging, carton
DALI TOUCHPANEL 02 white
28000022
1 piece
luxCONTROL lighting
control systems
Wiring diagrams and installation examples, page 451
Catalogue 2012
www.tridonic.com
395
NEW
luxCONTROL lighting control system
DALI control units
DALI x/e-touchPANEL 02
Operating and control unit
Product description
DALI control system with 3 choosable modes:
• Light management
• Emergency lighting
Properties
Light management:
• Lighting management system with up to 128 DALI ECGs
• Start-up, control and operating unit
• Colour touch screen (7“)
• Background lighting with RGB LEDs
• Manual dimming and switching
• Manual scene recall or timed scene recall
with a maximum of 99 sequences
• Tunable white (colour converter) control
7˝
• Weekday-controlled sequence programming (schedule)
Ethernet
• User-deined labelling of scenes, groups,
sequences and schedules
• Optimised mode for RGB coloured light management
USB
• Operation via a web browser (Ethernet)
Ê
For product data sheet go to www.tridonic.com,
or available on request
Ordering data
Type
Article number
Packaging, carton
DALI x/e-touchPANEL 02
28000005
1 piece
Technical data
Rated supply voltage mains adapter
230 – 240 V
Mains frequency mains adapter
50 / 60 Hz
Rated supply voltage DALI x/e-touchPANEL 02
24 – 48 V DC
Power
10 W
Number of DALI circuits
2
Current consumption of each DALI line
2 mA
Ambient temperature ta
0 ... +50 °C
Touchscreen size
7“
Touchscreen pixel
800 x 480
Colours
64K
Interface
USB, Ethernet
Dimensions L x W x H
200 x 150 x 20 mm
Distance between mounting holes (D)
155 mm
Type of protection
IP20
Protection class
I
È
Product matrix, page 387
Wiring diagrams and installation examples, page 451
396
www.tridonic.com
Catalogue 2012
luxCONTROL lighting control system
DALI control units
DALI SQM
Sequencer module for DALI systems
Product description
• Sequencer module for DALI systems
• Continual transmission of DALI signals (step time)
• Calling up scenes 0 – 15
• End scene programmable
• Power supply via DALI line
• Rotary switch: 1 s to 30 min
• For installation in switching cabinets
Ê
For product data sheet go to www.tridonic.com,
or available on request
Technical data
Supply via
DALI cable
Current draw
9 mA from DALI
Input
Rotary switch, 1 s – 30 min.
Function switch: max. cable length 100 m
Output
DALI
Ambient temperature ta
0 ... +50 °C
Type of protection
IP20
È
Product matrix, page 387
Wiring diagrams and installation examples, page 451
Ordering data
Article number
Packaging, carton
86458211
1 piece
luxCONTROL lighting
control systems
Type
DALI SQM
Catalogue 2012
www.tridonic.com
397
luxCONTROL lighting control system
DALI control units
DALI PS
DALI power supply for installation in switch cabinet
Product description
• For supplying 200 mA for DALI devices or control modules
without their own power supplies
• For installation in switching cabinets
Ê
For product data sheet go to www.tridonic.com,
or available on request
Technical data
Rated supply voltage
120 – 240 V
Mains frequency
50 / 60 Hz
Power
4W
Output
DALI
Max. output current, DALI
200 mA
Ambient temperature ta
0 ... +50 °C
Type of protection
IP20
90
È
Product matrix, page 387
Wiring diagrams and installation examples, page 451
Ordering data
398
Type
Article number
Packaging, carton
DALI PS
24033444
1 piece
www.tridonic.com
Catalogue 2012
luxCONTROL lighting control system
DALI control units
DALI PS2
DALI power supply for installation in switch cabinet
Product description
• For supplying 240 mA for DALI devices or control modules
without their own power supplies
• For installation in switching cabinets
Ê
For product data sheet go to www.tridonic.com,
or available on request
Technical data
Rated supply voltage
220 – 240 V
Mains frequency
50 / 60 Hz
Power
5W
Max. output current, DALI
240 mA
Operating temperature
0 ... +50 °C
Storage temperature
0 ... +70 °C
Type of protection
IP20
È
Product matrix, page 387
Wiring diagrams and installation examples, page 451
Ordering data
Article number
Packaging, carton
86458559
1 piece
luxCONTROL lighting
control systems
Type
DALI PS2
Catalogue 2012
www.tridonic.com
399
luxCONTROL lighting control system
DALI control units
DALI PS2 standby
DALI power supply for installation in switchgear cabinets
and standby function
Product description
• For supplying 240 mA for DALI devices or control modules
without their own power supplies
• For installation in switching cabinets
• Automatic monitoring of the connected luminaires
• The built-in relay isolates the connected equipment
from the power supply via an external contactor
if all the luminaires are switched of
• The ballasts are switched on and set to
the required status via DALI commands
Ê
For product data sheet go to www.tridonic.com,
or available on request
Technical data
Rated supply voltage
220 – 240 V
Mains frequency
50 / 60 Hz
Power
5W
Max. output current, DALI
240 mA
Operating temperature
0 ... +50 °C
Storage temperature
0 ... +70 °C
Type of protection
IP20
È
Product matrix, page 387
Wiring diagrams and installation examples, page 451
Ordering data
Type
Article number
Packaging, carton
DALI PS2 Standby
86458560
1 piece
Speciic technical data
Output, relay
Type
DALI PS2 Standby
400
Max. switching voltage AC
Max. switching current
DC switching capability
at 100 – 250 V DC
DC switching capability
at 50 – 100 V DC
DC switching capability
at 0 – 50 V DC
250 V
1A
0.3 A
0.5 A
1A
www.tridonic.com
Catalogue 2012
luxCONTROL lighting control system
DALI control units
DALI PS1
DALI power supply for separate installation
Product description
• For supplying 200 mA for DALI devices or control modules
without their own power supplies
• Surface-mounted casing
Ê
For product data sheet go to www.tridonic.com,
or available on request
Technical data
Rated supply voltage
120 – 240 V
Mains frequency
50 / 60 Hz
Power
4W
Output
DALI
Max. output current, DALI
200 mA
Ambient temperature ta
0 ... +50 °C
Type of protection
IP20
È
Product matrix, page 387
Wiring diagrams and installation examples, page 451
Ordering data
Article number
Packaging, carton
24034323
1 piece
luxCONTROL lighting
control systems
Type
DALI PS1
Catalogue 2012
www.tridonic.com
401
luxCONTROL lighting control system
DALI interface
DALI USB
PC interface module for DALI systems
Product description
• Interface module from USB to a DALI system
• For connecting Tridonic software tools
• Addressing, programming and parametrising
DALI installations and Tridonic devices
• Power supply via DALI line and USB interface
Ê
For product data sheet go to www.tridonic.com,
or available on request
Technical data
Supply via
DALI cable and USB interface
Current draw
6 mA from DALI
Input
1 USB (Personal Computer)
Output
DALI
Ambient temperature ta
0 ... +50 °C
Type of protection
IP20
È
Product matrix, page 387
Wiring diagrams and installation examples, page 451
Ordering data
402
Type
Article number
Packaging, carton
DALI USB
24138923
1 pieces
www.tridonic.com
Catalogue 2012
luxCONTROL lighting control system
DALI interface
DALI DSI
Converter for DALI into DSI signals
Product description
• Converter for converting DALI signals into DSI signals
• For integrating DSI-based devices in DALI lighting control systems
• Rotary switch for assigning the group address for the DSI output
• 1 DSI output for a maximum of 5 DSI devices
• Power supply via DALI line
Ê
For product data sheet go to www.tridonic.com,
or available on request
Technical data
Supply via
DALI cable
Ambient temperature ta
0 ... +50 °C
Type of protection
IP20
È
Product matrix, page 387
Wiring diagrams and installation examples, page 451
Ordering data
Type
Article number
Packaging, carton
DALI DSI
24034689
1 pieces
Speciic technical data
Inputs
Type
Current draw
Number of DALI addresses
Digital control line DSI
Control output per physical output (devices)
1
16 mA from DALI
1
1
5
luxCONTROL lighting
control systems
DALI DSI
Outputs
DALI control input
Catalogue 2012
www.tridonic.com
403
luxCONTROL lighting control system
DALI interface
DALI DSI II
Converter for DALI into DSI signals
Product description
• Converter for converting DALI signals into DSI signals
• For integrating DSI-based devices in DALI lighting control systems
• 1 DALI input, 2 DSI outputs
• A DALI address can be assigned to each DSI output
• Rotary selector switch for assigning two group addresses
for the two DSI outputs
• 25 DSI devices can be controlled per output
• Integrated power supply
Ê
For product data sheet go to www.tridonic.com,
30
21
or available on request
Technical data
120 – 277 V
Mains frequency
50 / 60 Hz
Power
<1W
Ambient temperature ta
0 ... +60 °C
Protection class
IP20
159
147–150
30
Rated supply voltage
È
Product matrix, page 387
Wiring diagrams and installation examples, page 451
Ordering data
Type
Article number
Packaging, carton
Packaging, carton
DALI-DSI II
86458691
1 piece
10 piece
Speciic technical data
Type
Current draw
Number of DALI
addresses
Digital control line DSI
1
2 mA from DALI
2
2
Control output per physical Maximum DSI cable length
output (devices)
at 1.5 mm²
25
250 m
Strain-relief set
21
ACCESSORIES
DALI-DSI II
Outputs
Inputs
DALI control input
50
234
Ordering data
404
Type
Article number
Packaging, carton
Strain-relief set
86458689
1 piece
www.tridonic.com
Catalogue 2012
luxCONTROL lighting control system
DALI interface
DALI Repeater
Extension of DALI cable length
Product description
• For amplifying the DALI signal
• For extending the DALI line length from 300 to 600 m
• A star-type network with multiple DALI Repeater can be set up
• Power supply via DALI line
• For installation in switching cabinets
Note
• Because of the signal delay it is not possible to connect
multiple DALI Repeater in series (no cascading)
• There is no increase in the maximum number of DALI units.
A maximum of 64 DALI addresses can be conigured in a DALI
circuit (main and subordinate circuit)
• Because of the electrical isolation between the main circuit
and the subordinate circuit an additional DALI power supply unit
is needed for each DALI Repeater
Ê
For product data sheet go to www.tridonic.com,
or available on request
Technical data
Supply via
DALI cable
Current draw for main control circuit (IN)
6 mA from DALI
Current draw for subordinate control circuit (OUT)
4 mA from DALI
Input
DALI
Output
DALI
Operating temperature
0 ... +50 °C
Storage temperature
-20 ... +70 °C
Type of protection
IP20
Ordering data
Type
Article number
Packaging, carton
DALI Repeater
86458401
1 piece
È
Product matrix, page 387
luxCONTROL lighting
control systems
Wiring diagrams and installation examples, page 451
Catalogue 2012
www.tridonic.com
405
luxCONTROL lighting control system
DALI interface
DALI Somfy animeo interface
Control module for Somfy motor control unit
Product description
• For integrating Somfy animeo IB+ motor controllers
in the DALI circuit
• Lighting moods and louvre blind positions
can be recalled together
• For animeo IB+ 4 AC motor controller (1860049,
1860081, 1860103, 1860108), animeo IB+ 4 DC
motor controller (1860086), animeo IB+ 4 DC/DC-E
motor controller (1860087)
• Compatible with DALI GC-A, DALI SC and SC-A,
DALI MC, DALI TOUCHPANEL 02, DALI USB and
x/e-touchPANEL 02 (Version 3.00 and higher)
• For 4 louvre blinds (4 DALI addresses therefore required)
• Support for 16 DALI groups and 16 DALI scenes
• Louvre blind is started up (e.g. travel) via
the Somfy animeo IB+ motor controller
Ê
For product data sheet go to www.tridonic.com,
or available on request
Technical data
Rated supply voltage
220 – 240 V
Mains frequency
50 / 60 Hz
Power
4W
Type
Article number
Packaging, carton
Operating temperature
0 ... +50 °C
DALI-Somfy animeo Interface
86458491
1 pieces
Storage temperature
-20 ... +70 °C
Type of protection
IP20
Ordering data
È
Product matrix, page 387
Wiring diagrams and installation examples, page 451
Speciic technical data
Type
DALI-Somfy animeo Interface
406
Outputs
Inputs
DALI control input
Current draw
Number of DALI
addresses
Control output
Output, maximum number
of controllable motors
1
6 mA from DALI
4 (one per motor)
Somfy motor controller protocol
4
www.tridonic.com
Catalogue 2012
NEW
luxCONTROL lighting control system
proDIM
proDIM Cluster Controller
proDIM
Product description
• Independent lighting control for up to
256 DALI ballasts on 4 DALI lines
• Can be expanded up to 500 DALI ballasts
• User-oriented web interface for coniguration and monitoring
• Simple setup via mobile web interface
• Status LED and installation test directly on the controller
• Highly eicient bus supply with 240 mA per DALI line
• Incorporation of up to 100 proDIM sensors
and up to 160 proDIM XC controllers
• Adjustable daylight regulation and control
62
• Freely programmable daily scheduling with calendar function
• Cross-DALI-line groups can be deined
• DALI emergency lighting units can be integrated for
individual batteries
8
159,1
89,4
35
91
4
10,25
91
• Maintenance and monitoring function
• Open web interface tailored to lighting requirements (ulml)
for linking to building automation systems
Ê
For product data sheet go to www.tridonic.com,
or available on request
Ordering data
Technical data
Rated supply voltage
110 – 240 V
Type
Article number
Packaging, carton
Weight per pcs.
Mains frequency
50 / 60 Hz
proDIM Cluster Controller
22176714
1 piece
0.37 kg
Power
16 W
Max. output current, DALI
240 mA
Output voltage
16 V ±5 %
Operating temperature
0 ... +50 °C
Storage temperature
-25 ... +70 °C
Mounting
DIN rail mounting, 35 mm
Casing material
PC, ABC self-extinguishing, V0
Type of protection
IP20
È
Speciic technical data
Type
proDIM Cluster Controller
Catalogue 2012
Inputs
Outputs
Ethernet
Max. transfer rate
Digital control lines DALI
Control output per physical output (devices)
Max. numbers
of increments
1
100 Mbit/s
4
64
4
www.tridonic.com
407
luxCONTROL lighting
control systems
Wiring diagrams and installation examples, page 451
NEW
luxCONTROL lighting control system
proDIM
proDIM XC
proDIM
Product description
DALI input controller
• 4 independent inputs for loating contacts
• For connecting standard momentary-action switch or switches
• The function can be freely assigned in the Cluster Controller
• Multiple proDIM XCs possible on the DALI line
• Power supply via DALI line
• Connection wires according to the terminal colours
with 30 cm length included
Ê
For product data sheet go to www.tridonic.com,
or available on request
DALI cable
Current draw
4 mA
Input
4 momentary-action switches
Output
DALI
Operating temperature
0 ... +60 °C
Storage temperature
-25 ... +80 °C
Humidity
20 % ... 90 % (non-condensing)
Type of protection
IP20
Mounting
Mounting box for momentary-action switch
Casing material
PC, halogen-free polycarbonate, non-lammable
È
Wiring diagrams and installation examples, page 451
408
48
28,2
28,2
Supply via
14,6
Technical data
Ordering data
Type
Article number
Packaging, carton
Weight per pcs.
proDIM XC
22185328
1 piece
0.012 kg
www.tridonic.com
Catalogue 2012
luxCONTROL lighting control system
DALI actuator
DALI 3-RM-C
DALI control module for 3 relays
Product description
• Control of up to three standard 24 V DC contactors
• 1 DALI address per output
Ê
For product data sheet go to www.tridonic.com,
or available on request
Technical data
Input voltage, AC
198 – 254 V
Input voltage, DC
200 – 240 V
Mains frequency
0 / 50 / 60 Hz
Power
< 30 W
Ambient temperature ta
-25 ... +45 °C
Type of protection
IP20
42
31
È
Product matrix, page 387
Wiring diagrams and installation examples, page 451
42
167
143–148
Ordering data
Type
Article number
Packaging, carton
Packaging, carton
DALI 3-RM-C
86458247
1 piece
10 piece
Speciic technical data
Inputs
Type
Current draw
Number of DALI addresses
Output voltage, DC
Output power
1
2 mA from DALI
3
3 x 24 V
25 W
luxCONTROL lighting
control systems
DALI 3-RM-C
Outputs
DALI control input
Catalogue 2012
www.tridonic.com
409
NEW
luxCONTROL lighting control system
DALI actuator
DALI-RM/S 4x10A
DALI relay output with 4 independent 10 A switching contacts
Product description
• Switching of 4 independent and potential free contacts via DALI
• Max. switching current per contact: 10 A at ohmic load (cos Φ = 1)
• 1 DALI address per switching contact
• For installation in switching cabinets
• Status LED for indicating the operating status
• Test switch for installation test
Ê
For product data sheet go to www.tridonic.com,
or available on request
Technical data
Rated supply voltage
230 – 240 V
Mains frequency
50 / 60 Hz
Power
<2W
Ambient temperature ta
0 ... +50 °C
Storage temperature
-20 ... +70 °C
Humidity1
5 % ... max. 85 %
Type of protection
IP20
Weight per pcs.
0.4 kg
È
Product matrix, page 387
Wiring diagrams and installation examples, page 451
Ordering data
Type
Article number
Packaging, carton
DALI-RM/S 4x10A
22185237
1 piece
Speciic technical data
Type
DALI-RM/S 4x10A
Output, relay
Inputs
DALI control input
Current draw
Number of DALI
addresses
Relay, loating
Switching output
(at 125 V DC max.)2
Switching output
(at 240 V AC max.)2
1
2 mA from DALI
4 (1 per contact)
4 (make contact)
30 W (ohmic load)
2,000 W / 10 A (ohmic load)
1 Not condensed (max. 56 days/year at 85 %).
2 More loads see data sheet.
410
www.tridonic.com
Catalogue 2012
luxCONTROL lighting control system
DALI actuator
DALI PCD 300 one4all
Leading-edge/trailing-edge phase dimmer
Product description
• Digital leading-edge and trailing-edge phase dimmer
• Total connected load: 30 – 300 VA
• one4all input: DALI, DSI and switchDIM input
• 1 dimmed phase (output)
• With automatic load detection
• Surface-mounted casing
• Status LED for indicating the operating status
Ê
For product data sheet go to www.tridonic.com,
or available on request
Technical data
Rated supply voltage
220 – 240 V
Mains frequency
50 / 60 Hz
Connected load
30 – 300 VA
Power loss
0.75 W (1.8 W at full load)
Ambient temperature ta
0 ... +50 °C
Type of protection
IP20
È
Product matrix, page 387
Ordering data
Wiring diagrams and installation examples, page 451
Type
Article number
Packaging, carton
DALI-PCD 300 one4all
86458303
20 pieces
Speciic technical data
Inputs
Type
Terminals
Current draw
Number of DALI
addresses
Dimmed phase
Control range, DSI
Control range, DALI
1
2 mA from DALI
1
1
0; 1 – 100 %
0; 0.1 – 100 %
0.5 – 1.5 mm²
luxCONTROL lighting
control systems
DALI-PCD 300 one4all
Outputs
Input, DALI/DSI control
input and switchDIM
Catalogue 2012
www.tridonic.com
411
luxCONTROL lighting control system
DALI actuator
DALI PCD/S
Leading-edge/trailing-edge phase dimmer
Product description
• Digital leading-edge and trailing-edge phase dimmer
• Total connected load: 40 – 1,000 VA
• DALI/DSI input
• Single (switchDIM) or double momentary-action switch input
• Preset function: storage and retrieval of any lighting value
• 1 dimmed phase (output)
• With automatic load detection
• For installation in switching cabinets
• Status LED for indicating the operating status
Ê
For product data sheet go to www.tridonic.com,
or available on request
Technical data
Rated supply voltage
220 – 240 V
Mains frequency
50 / 60 Hz
Connected load
40 – 1,000 VA
Power loss
2 W (15 W at full load)
Ambient temperature ta
0 ... +40 °C
Type of protection
IP20
È
Product matrix, page 387
Wiring diagrams and installation examples, page 451
Ordering data
Type
Article number
Packaging, carton
DALI-PCD/S
22154332
1 piece
Speciic technical data
Type
DALI-PCD/S
412
Outputs
Inputs
Momentary-action switch Single or twin momentaryinput for preset retrieval
action switches
1
1
DALI/DSI
control input
Current draw
Number of
DALI addresses
Dimmed phase
Control range,
output
1
2 mA from DALI
1
1
0; 1 – 100 %
www.tridonic.com
Terminals
0.75 – 2.5 mm²
Catalogue 2012
NEW
luxCONTROL lighting control system
SMART sensors
SMART Sensor 5D 19f
Ambient light sensor for lighting control
Product description
• Optional ambient light sensor for PCA EXCEL one4all,
PCA ECO and PCA BASIC devices from the y II generation
• With ambient light dependent control
• Simple setting of the set-point via integrated
momentary-action switch at the sensor
• Compact dimensions for luminaire installation
• Simple cable connection to the ballast via SMART interface
• Power supply via ballast
• Fixing on lamp possible with lamp clip
• Max. installation height 5 m
Ê
39
For product data sheet go to www.tridonic.com,
or available on request
19
3
Technical data
SMART interface
Current draw
1 mA from SMART interface
Operating temperature
0 ... +70 °C
Storage temperature
-20 ... +75 °C
Type of protection
IP20
Max. casing temperature tc
73 °C
13,5
16
17,2
23,2
Supply via
È
Ordering data
Product matrix, page 387
Wiring diagrams and installation examples, page 451
Type
Article number
Packaging, bag
SMART Sensor 5D 19f
86459169
1 piece
Speciic technical data
Detection
Type
Light detection
angle symmetric
Light measurement
at the sensor head1
Illuminance (factory
default)2
42 °
40 – 1,000 lx
500 lx
SMART Sensor 5D 19f
Max. cable
length
Control output
(devices)
0.8 m
1
1 The measured value at the sensor head corresponds to approx. 60 to 3,000 lux on the surface measured.
2 The illuminance is set for a room deined by Tridonic. Depending on the actual room (relectance)
luxCONTROL lighting
control systems
the measured illuminance may deviate from this value.
The illuminance should therefore be checked in the installation and adjusted if necessary.
Catalogue 2012
www.tridonic.com
413
ACCESSORIES
luxCONTROL lighting control system
SMART sensors
SMART Sensor T5 Clip
Product description
• Mounting Clip for mounting the sensor directly
to the lamp incl. mounting lange
ACCESSORIES
Ordering data
Type
Article number
Packaging, bag
SMART Sensor T5 Clip + Mounting Flange
86459343
10 pieces
SMART Sensor T8 Clip
Product description
• Mounting Clip for mounting the sensor directly
to the lamp incl. mounting lange
Ordering data
414
Type
Article number
Packaging, bag
SMART Sensor T8 Clip + Mounting Flange
86459344
10 pieces
www.tridonic.com
Catalogue 2012
ACCESSORIES
luxCONTROL lighting control system
SMART sensors
SMART Sensor Mounting Flange
Ø 4,6
Product description
10,2
0,5
Ø 4,2
10,2
5
to the lamp clip
0,6
1,8
0,85
• Mounting lange for connecting the sensor
• Mounting lange for connecting the sensor
directly to the luminaire housing
Type
Article number
Packaging, bag
SMART Sensor Mounting Flange
86459328
50 pieces
SMART Sensor Cover Frame
Product description
7,8
6,4
ACCESSORIES
Ordering data
Ø34
• Cover frame for attaching the sensor
16,25
5
21,4
23,4
directly to the luminaire casing
Ordering data
Article number
Packaging, bag
07992913
10 pieces
luxCONTROL lighting
control systems
Type
SMART Cover 19f 02
Catalogue 2012
www.tridonic.com
415
NEW
luxCONTROL lighting control system
SMART sensors
SMART Sensor 5DP 19f
Ambient light sensor and presence detector for lighting control
Product description
• Optional ambient light sensor and motion detector
for PCA EXCEL one4all devices from the y II generation
• Simple setting of the set-point via integrated
momentary-action switch at the sensor
• Compact dimensions for luminaire installation
• Simple cable connection to the ballast via SMART interface
• Power supply via ballast
• Fixing on lamp possible with lamp clip
• Lighting control and presence detection can be deactivated
• Individual adjustment of the parameters with coniguration software
39
• Max. installation height 5 m
Ê
For product data sheet go to www.tridonic.com,
3
19
or available on request
Technical data
Supply via
SMART interface
Current draw
1 mA from SMART interface
Type of protection
IP20
Max. casing temperature tc
63 °C
16
0 ... +60 °C
-20 ... +65 °C
È
17,2
23,2
25,6
Operating temperature
Storage temperature
13,5
Ordering data
Product matrix, page 387
Type
Article number
Packaging, bag
Wiring diagrams and installation examples, page 451
SMART Sensor 5DP 19f
86459170
1 piece
Speciic technical data
Type
SMART Sensor 5DP 19f
Detection
Light detection
angle asymmetric
Light measurement
at the sensor head1
Illuminance (factory
default)2
Motion detection
angle symmetric
31 °
40 – 1,000 lx
500 lx
92 °
Max. cable
length
Control output
(devices)
0.8 m
1
1 The measured value at the sensor head corresponds to approx. 60 to 3,000 lux on the surface measured.
2 The illuminance is set for a room deined by Tridonic. Depending on the actual room (relectance)
the measured illuminance may deviate from this value.
The illuminance should therefore be checked in the installation and adjusted if necessary.
416
www.tridonic.com
Catalogue 2012
ACCESSORIES
luxCONTROL lighting control system
SMART sensors
SMART Sensor T5 Clip
Product description
• Mounting Clip for mounting the sensor directly
to the lamp incl. mounting lange
ACCESSORIES
Ordering data
Type
Article number
Packaging, bag
SMART Sensor T5 Clip + Mounting Flange
86459343
10 pieces
SMART Sensor T8 Clip
Product description
• Mounting Clip for mounting the sensor directly
to the lamp incl. mounting lange
Ordering data
Article number
Packaging, bag
86459344
10 pieces
luxCONTROL lighting
control systems
Type
SMART Sensor T8 Clip + Mounting Flange
Catalogue 2012
www.tridonic.com
417
ACCESSORIES
luxCONTROL lighting control system
SMART sensors
SMART Sensor Mounting Flange
Ø 4,6
Product description
10,2
0,5
Ø 4,2
10,2
5
to the lamp clip
0,6
1,8
0,85
• Mounting lange for connecting the sensor
• Mounting lange for connecting the sensor
directly to the luminaire housing
Type
Article number
Packaging, bag
SMART Sensor Mounting Flange
86459328
50 pieces
SMART Sensor Cover Frame
Product description
7,8
6,4
ACCESSORIES
Ordering data
Ø34
• Cover frame for attaching the sensor
16,25
5
21,4
23,4
directly to the luminaire casing
Ordering data
418
Type
Article number
Packaging, bag
SMART Cover 19f 02
07992913
10 pieces
www.tridonic.com
Catalogue 2012
NEW
luxCONTROL lighting control system
SMART sensors
SMART Sensor 5DPI 19f
Ambient light sensor and presence detector for lighting control
Product description
• Optional ambient light sensor and presence detector
for PCA EXCEL one4all devices from the y II generation
• Can be remote controlled
• Compact dimensions for luminaire installation
• Simple cable connection to the ballast via SMART interface
• Power supply via ballast
• Fixing on lamp possible with lamp clip
• Lighting control and presence detection can be deactivated
• Individual adjustment of the parameters with coniguration software
• Optional with corridorFUNCTION proile
39
• Optional connection with second ballast possible
5
3,5
via accessory cable
19
• Max. installation height 5 m
Ê
For product data sheet go to www.tridonic.com,
or available on request
12,5
Power supply via
SMART interface
Current draw
1 mA from SMART interface
Operating temperature
0 ... +60 °C
Storage temperature
-20 ... +65 °C
Type of protection
IP20
Max. casing temperature tc
63 °C
16
16,7
23,2
25,6
Technical data
Ordering data
È
Product matrix, page 387
Wiring diagrams and installation examples, page 451
Type
Article number
Packaging, bag
SMART Sensor 5DPI 19f
86459167
1 piece
SMART Sensor 5DPI 19f cF n.o.
86459327
1 piece
SMART Sensor 5DPI 19f cF 01
86459325
1 piece
SMART Sensor 5DPI 19f cF 30
86459326
1 piece
Speciic technical data
Detection
Type
Light detection
angle asymmetric
Light measurement
at the sensor head1
Illuminance
(factory default)2
Motion detection
angle symmetric
Max. cable
length
Control output
(devices)
corridorFUNCTION proile
SMART Sensor 5DPI 19f
31°
40 – 1,000 lx
500 lx
92°
0.8 m
2
–
SMART Sensor 5DPI 19f cF n.o.
31°
40 – 1,000 lx
500 lx
92°
0.8 m
2
never of
SMART Sensor 5DPI 19f cF 01
31°
40 – 1,000 lx
500 lx
92°
0.8 m
2
switch-of 1 minute
SMART Sensor 5DPI 19f cF 30
31°
40 – 1,000 lx
500 lx
92°
0.8 m
2
switch-of 30 minutes
measured value at the sensor head corresponds to approx. 60 to 3,000 lux on the surface measured.
luxCONTROL lighting
control systems
1 The
2 The
illuminance is set for a room deined by Tridonic. Depending on the actual room (relectance)
the measured illuminance may deviate from this value.
The illuminance should therefore be checked in the installation and adjusted if necessary.
Catalogue 2012
www.tridonic.com
419
ACCESSORIES
luxCONTROL lighting control system
SMART sensors
SMART Sensor T5 Clip
Product description
• Mounting Clip for mounting the sensor directly
to the lamp incl. mounting lange
ACCESSORIES
Ordering data
Type
Article number
Packaging, bag
SMART Sensor T5 Clip + Mounting Flange
86459343
10 pieces
SMART Sensor T8 Clip
Product description
• Mounting Clip for mounting the sensor directly
to the lamp incl. mounting lange
ACCESSORIES
Ordering data
Type
Article number
Packaging, bag
SMART Sensor T8 Clip + Mounting Flange
86459344
10 pieces
SMART Sensor Mounting Flange
Ø 4,6
Product description
10,2
0,5
Ø 4,2
10,2
5
to the lamp clip
0,6
1,8
0,85
• Mounting lange for connecting the sensor
• Mounting lange for connecting the sensor
directly to the luminaire housing
Ordering data
420
Type
Article number
Packaging, bag
SMART Sensor Mounting Flange
86459328
50 pieces
www.tridonic.com
Catalogue 2012
ACCESSORIES
luxCONTROL lighting control system
SMART sensors
IR SMART Controller
Product description
• Optional infra-red remote control
• Switching on and of (On/Of button)
• Dimming (Up/Down button)
• Activation of automatic lighting control (Automatic button)
• Setting the threshold control point (Set button)
ACCESSORIES
Ordering data
Type
Article number
Packaging, bag
DSI-SMART Controller
86451922
1 piece
SMART Sensor Extension Cable
Product description
• Cable for optional connection of the sensor
with a second ballast
Type
Article number
Length
Packaging, bag
SMART Sensor Extension Cable
86459176
0.8 m
10 pieces
SMART Sensor Cover Frame
Product description
7,8
6,4
Ø34
• Cover frame for attaching the sensor
luxCONTROL lighting
control systems
ACCESSORIES
Ordering data
16,25
5
21,4
23,4
directly to the luminaire casing
Ordering data
Catalogue 2012
Type
Article number
Packaging, bag
SMART Cover 19f 03
07992914
10 pieces
www.tridonic.com
421
NEW
luxCONTROL lighting control system
SMART sensors
SMART Sensor 10DPI 19f
Ambient light sensor and presence detector for lighting control
Product description
• Optional ambient light sensor and motion detector
for PCA EXCEL one4all devices from the y II generation
• Can be remote controlled
• Max. installation height 10 m
• Compact dimensions for luminaire installation
• Simple cable connection to the ballast via SMART interface
• Power supply via ballast
• Fixing on lamp possible with lamp clip
• Lighting control and presence detection can be deactivated
• Individual adjustment of the parameters with coniguration software
• Optinal with corridorFUNCTION proile
39
5
5
3,5
• Optional connection with second ballast possible
19
via accessory cable
Ê
For product data sheet go to www.tridonic.com,
or available on request
12,5
12,5
Supply via
SMART interface
Current draw
1 mA from SMART interface
Operating temperature
0 ... +60 °C
Storage temperature
-20 ... +65 °C
Type of protection
IP20
Max. casing temperature tc
63 °C
16
16,7
23,2
28,9
Technical data
Ordering data
È
Type
Article number
Packaging, bag
SMART Sensor 10DPI 19f
86459168
1 piece
Product matrix, page 387
SMART Sensor 10DPI 19f cF n.o.
86459324
1 piece
SMART Sensor 10DPI 19f cF 01
86459322
1 piece
Wiring diagrams and installation examples, page 451
SMART Sensor 10DPI 19f cF 30
86459323
1 piece
Speciic technical data
Type
Detection
Max. cable
length
Control output
(devices)
93 °
0.8 m
2
–
93 °
0.8 m
2
never of
500 lx
93 °
0.8 m
2
switch of 1 minute
500 lx
93 °
0.8 m
2
switch of 30 minutes
Light detection
angle symmetric
Light measurement
at the sensor head1
Illuminance
(factory default)2
Motion detection
angle symmetric
SMART Sensor 10DPI 19f
38 °
40 – 1,000 lx
500 lx
SMART Sensor 10DPI 19f cF n.o.
38 °
40 – 1,000 lx
500 lx
SMART Sensor 10DPI 19f cF 01
38 °
40 – 1,000 lx
SMART Sensor 10DPI 19f cF 30
38 °
40 – 1,000 lx
corridorFUNCTION proile
1 The measured value at the sensor head corresponds to approx. 60 to 3,000 lux on the surface measured.
2 The illuminance is set for a room deined by Tridonic. Depending on the actual room (relectance)
the measured illuminance may deviate from this value.
The illuminance should therefore be checked in the installation and adjusted if necessary.
422
www.tridonic.com
Catalogue 2012
ACCESSORIES
luxCONTROL lighting control system
SMART sensors
SMART Sensor T5 Clip
Product description
• Mounting Clip for mounting the sensor directly
to the lamp incl. mounting lange
ACCESSORIES
Ordering data
Type
Article number
Packaging, bag
SMART Sensor T5 Clip + Mounting Flange
86459343
10 pieces
SMART Sensor T8 Clip
Product description
• Mounting Clip for mounting the sensor directly
to the lamp incl. mounting lange
Type
Article number
Packaging, bag
SMART Sensor T8 Clip + Mounting Flange
86459344
10 pieces
SMART Sensor Mounting Flange
Ø 4,6
Product description
10,2
0,5
Ø 4,2
10,2
5
to the lamp clip
0,6
1,8
0,85
• Mounting lange for connecting the sensor
• Mounting lange for connecting the sensor
directly to the luminaire housing
Ordering data
Catalogue 2012
Type
Article number
Packaging, bag
SMART Sensor Mounting Flange
86459328
50 pieces
www.tridonic.com
423
luxCONTROL lighting
control systems
ACCESSORIES
Ordering data
ACCESSORIES
luxCONTROL lighting control system
SMART sensors
IR SMART Controller
Product description
• Optional infra-red remote control
• Switching on and of (On/Of button)
• Dimming (Up/Down button)
• Activation of automatic lighting control (Automatic button)
• Setting the threshold control point (Set button)
ACCESSORIES
Ordering data
Type
Article number
Packaging, bag
DSI-SMART Controller
86451922
1 piece
SMART Sensor Extension Cable
Product description
• Cable for optional connection of the sensor
with a second ballast
Ordering data
424
Type
Article number
Length
Packaging, bag
SMART Sensor Extension Cable
86459176
0.8 m
10 pieces
www.tridonic.com
Catalogue 2012
luxCONTROL lighting control system
basicDIM
basicDIM RCL
Control module for combination with ambient light sensor,
momentary-action switch and presence sensor
Product description
• Digital control module with ambient light sensor, motion
detector and momentary-action switch input
• Control module for controlling up to 25 DSI ballasts
• Dimming, switching and saving of the daylight set value
via single momentary-action switch; multiple switches
can be connected in parallel
• Saving of the daylight set value lockable
• With the Link Line it is possible to connect
up to 20 basicDIM RCL’s to one system
(synchronisation of motion detection)
30
• Mode can be selected via rotary switch
Ê
21
• Input for a maximum of 4 basicDIM sensors
For product data sheet go to www.tridonic.com,
or available on request
159
147–150
Technical data
220 – 240 V
Mains frequency
50 / 60 Hz
Power
1.5 W
Operating temperature
0 ... +60 °C
Storage temperature
-25 ... +70 °C
Type of protection
IP20
30
Rated supply voltage
Ordering data
È
Product matrix, page 387
Type
Article number
Packaging, carton
Packaging, carton
basicDIM RCL
86458998
1 piece
10 pieces
Wiring diagrams and installation examples, page 451
Speciic technical data
Inputs
Type
Outputs
Link Line
Dimming momentaryaction switch
Max. basicDIM
sensors
Max. sensor line
length
Digital control
line DSI
Control output per physical
output DSI (devices)
Dimming range
Voltage DC
Number of combinable
modules
single
4
10 m
1
25
1 – 100 %
15 V
20
luxCONTROL lighting
control systems
basicDIM RCL
Catalogue 2012
www.tridonic.com
425
ACCESSORIES
luxCONTROL lighting control system
basicDIM
basicDIM Sensor 5DP 19f
Product description
• Optional ambient light sensor and motion detector
for basicDIM RCL and basicDIM RCL DBC
• Ceiling installation
• With push-in terminal
ACCESSORIES
Ordering data
Type
Article number
Packaging
basicDIM 5DP 19f
86459173
1 piece
Accessories for basicDIM Sensor 5DP 19f
Product description
• Optional for increasing the detection range of the
motion detector for basicDIM Sensor 5DP 19f
ACCESSORIES
Ordering data
Type
Article number
Packaging
smartDIM mirror
86454640
1 piece
basicDIM Sensor 5DP 41rc
Product description
• Optional ambient light sensor and motion detector
for basicDIM RCL and basicDIM RCL DBC
• Surface mounting
46
5
Ø 86
Ordering data
426
Type
Article number
Packaging
basicDIM Sensor 5DP 41rc
86459115
1 piece
www.tridonic.com
Catalogue 2012
ACCESSORIES
luxCONTROL lighting control system
basicDIM
basicDIM Sensor 5DP 41rs
Product description
• Optional ambient light sensor and motion detector
for basicDIM RCL and basicDIM RCL DBC
• Surface mounting
Type
Article number
Packaging
basicDIM Sensor 5DP 41rs
86459116
1 piece
Strain-relief set
21
ACCESSORIES
Ordering data
50
234
Ordering data
Article number
Packaging
86458689
1 piece
luxCONTROL lighting
control systems
Type
Strain-relief set
Catalogue 2012
www.tridonic.com
427
NEW
luxCONTROL lighting control system
basicDIM
basicDIM RCL DBC
Control module for combination with ambient light sensor, momentary-action
switch and presence sensor
Product description
• Digital control module with ambient light sensor, motion
detector and momentary-action switch input
• DALI Broadcast control module for controlling up to 10 DALI ballasts
• Dimming, switching and saving of the daylight set value
via single momentary-action switch; multiple switches
can be connected in parallel
• Saving of the daylight set value lockable
• With the Link Line it is possible to connect
up to 20 basicDIM RCL DBC to one system
(synchronisation of motion detection)
30
• Mode can be selected via rotary switch
Ê
21
• Input for a maximum of 4 basicDIM sensors
For product data sheet go to www.tridonic.com,
or available on request
159
147–150
Technical data
220 – 240 V
Mains frequency
50 / 60 Hz
Power
1.5 W
Operating temperature
0 ... +60 °C
Storage temperature
-25 ... +70 °C
Type of protection
IP20
30
Rated supply voltage
Ordering data
È
Product matrix, page 387
Type
Article number
Packaging, carton
Packaging, carton
basicDIM RCL DBC
86459306
1 piece
10 pieces
Wiring diagrams and installation examples, page 451
Speciic technical data
Type
basicDIM RCL DBC
428
Outputs
Inputs
Dimming momentaryaction switch
Max. basicDIM
sensors
Max. sensor line
length
single
4
10 m
Digital control line Control output per physical
DALI
output DALI (devices)
1
www.tridonic.com
10
Link Line
Dimming range
Voltage DC
Number of combinable
modules
1 – 100 %
15 V
20
Catalogue 2012
ACCESSORIES
luxCONTROL lighting control system
basicDIM
basicDIM Sensor 5DP 19f
Product description
• Optional ambient light sensor and motion detector
for basicDIM RCL and basicDIM RCL DBC
• Ceiling installation
• With push-in terminal
ACCESSORIES
Ordering data
Type
Article number
Packaging
basicDIM 5DP 19f
86459173
1 piece
Accessories for basicDIM Sensor 5DP 19f
Product description
• Optional for increasing the detection range of the
motion detector for basicDIM Sensor 5DP 19f
ACCESSORIES
Ordering data
Type
Article number
Packaging
smartDIM mirror
86454640
1 piece
basicDIM Sensor 5DP 41rc
Product description
luxCONTROL lighting
control systems
• Optional ambient light sensor and motion detector
for basicDIM RCL and basicDIM RCL DBC
• Surface mounting
46
5
Ø 86
Ordering data
Catalogue 2012
Type
Article number
Packaging
basicDIM Sensor 5DP 41rc
86459115
1 piece
www.tridonic.com
429
ACCESSORIES
luxCONTROL lighting control system
basicDIM
basicDIM Sensor 5DP 41rs
Product description
• Optional ambient light sensor and motion detector
for basicDIM RCL and basicDIM RCL DBC
• Surface mounting
Type
Article number
Packaging
basicDIM Sensor 5DP 41rs
86459116
1 piece
Strain-relief set
21
ACCESSORIES
Ordering data
50
234
Ordering data
430
Type
Article number
Packaging
Strain-relief set
86458689
1 piece
www.tridonic.com
Catalogue 2012
luxCONTROL lighting control system
basicDIM
DSI-SMART PTM
Ambient light sensor and presence detector for constant lighting control
Product description
• Ambient light sensor with motion detector
• Momentary-action switch input for on/of switching and dimming
• 3 diferent casing versions
• For 4 or 25 DSI or DALI ballasts
• Functions can be conigured with the DSI-SMART Programmer
Ê
For product data sheet go to www.tridonic.com,
or available on request
Fig. 1
Technical data
Rated supply voltage
220 – 240 V
Mains frequency
50 / 60 Hz
Operating temperature
0 ... +60 °C
Storage temperature
-25 ... +60 °C
Type of protection
IP20
È
Product matrix, page 387
Wiring diagrams and installation examples, page 451
Fig. 2
Fig. 3
21
50
Ordering data
Catalogue 2012
Figure
Packaging, carton
Type
Article number
DSI-SMART PTM integrated Luminaire installation
86458588
1
10 pieces
DSI-SMART PTM remote surface Surface mounting 86458589
2
1 piece
DSI-SMART PTM remote ceiling Ceiling installation
3
1 piece
www.tridonic.com
86458587
431
luxCONTROL lighting
control systems
50
193
luxCONTROL lighting control system
basicDIM
Speciic technical data
Supply
Type
Inputs
Output, standby
Power
Dimming momentaryaction switch
Outputs
Digital control line
DSI/DALI1
Control output per physical
output (devices)
Maximum DSI cable
length at 1.5 mm²
DSI-SMART PTM integrated
1.7 W
1.5 W
single
1
4
250 m
DSI-SMART PTM remote surface
1.7 W
1.5 W
single
1
4
250 m
DSI-SMART PTM remote ceiling
3.9 W
1.3 W
single
1
25
250 m
DALI from DSI SMART PTM V1.1 – for parameterization the DSI SMART Programmer from V2.01 is required.
ACCESSORIES
1
IR SMART Controller
Product description
• Optional infra-red remote control
• Switching on and of (On/Of button)
• Dimming (Up/Down button)
• Activation of automatic lighting control (Automatic button)
• Setting the threshold control point (Set button)
ACCESSORIES
Ordering data
Type
Article number
Packaging, carton
DSI-SMART Controller
86451922
1 piece
DSI SMART Programmer
Product description
• Optional infra-red programming unit for DSI-SMART PTM
• Settings can be read and modiied
• Programmable functions such as light level, time delay, P.I.R.,
bright-out, power up, start, override
Ordering data
432
Type
Article number
Packaging, carton
DSI-SMART Programmer
86447355
1 piece
www.tridonic.com
Catalogue 2012
luxCONTROL lighting control system
basicDIM
smartDIM SM lp
Control module for combination with ambient light sensor,
momentary-action switch or presence sensor
Product description
• Digital DSI control module (luminaire installation unit)
for daylight control, motion detector and momentaryaction switch input
• For luminaire installation in a low-proile casing
• Input for a maximum of 2 smartDIM sensors
• Dimming and switching via single momentary-action
switch; multiple switches can be connected in parallel
• Mode can be selected via rotary switch
• The device can be disconnected from the power supply
via a built-in relay (this reduce standby losses)
Ê
For product data sheet go to www.tridonic.com,
or available on request
Technical data
Rated supply voltage
220 – 240 V
Mains frequency
50 / 60 Hz
Power
1.5 W
Operating temperature
0 ... +60 °C
Storage temperature
-25 ... +55 °C
Type of protection
IP20
È
Product matrix, page 387
Ordering data
Wiring diagrams and installation examples, page 451
Type
Article number
Packaging, carton
smartDIM SM lp
86458337
10 pieces
Speciic technical data
Inputs
Type
Dimming momentary- Max. smartDIM
action switch
sensors
single
2
Digital control
line DSI
10 m
1
Output, relay (L‘)
Control output per
Maximum DSI cable Max. switching Maximum apparent Max. switching
physical output (devices) length at 1.5 mm² output (e.g. PCA)
power
output
25
250 m
2
200 VA
500 W
luxCONTROL lighting
control systems
smartDIM SM lp
Outputs
Max. sensor line
length
Catalogue 2012
www.tridonic.com
433
ACCESSORIES
luxCONTROL lighting control system
basicDIM
smartDIM Sensor 1
Product description
• Optional ambient light sensor and motion detector
for smartDIM SM lp
• Compact low-proile dimensions for luminaire installation
• With push-in terminal or cable
È
Fig. 1
Product matrix, page 387
Wiring diagrams and installation examples, page 451
Fig. 2
Ordering data
434
Packaging, carton
Type
Article number
smartDIM Sensor 1
86454265
1
50 pieces
smartDIM Sensor 1 Cable
86458462
2
25 pieces
www.tridonic.com
Figure
Catalogue 2012
ACCESSORIES
luxCONTROL lighting control system
basicDIM
Accessories for smartDIM Sensor
Product description
• Optional for increasing the detection range of the
motion detector for smartDIM Sensor 1
ACCESSORIES
Ordering data
Type
Article number
Packaging, carton
smartDIM Mirror
86454640
1 piece
smartDIM Sensor 2
Product description
• Optional ambient light sensor and motion detector
for smartDIM SM lp
• Compact low-proile dimensions for luminaire installation
È
Ordering data
Type
Article number
Packaging, carton
Wiring diagrams and installation examples, page 451
smartDIM Sensor 2
86454523
10 pieces
luxCONTROL lighting
control systems
Product matrix, page 387
Catalogue 2012
www.tridonic.com
435
luxCONTROL lighting control system
DSI control units
modularDIM Basic
Control and lighting regulation module for 3 DSI channels
Product description
• Basic module for manual dimming and switching of 3 independent
DSI output groups
• SELV switch inputs for using conventional momentary-action
switches
• Up to 100 DSI devices per output channel
• Floating motion detector inputs for switching each group
• Ready to start without programming
• For installation in switching cabinets
Ê
For product data sheet go to www.tridonic.com,
or available on request
Technical data
Rated supply voltage
120 – 277 V
Mains frequency
50 / 60 Hz
Power
< 10 W
Ambient temperature ta
0 ... +50 °C
Type of protection
IP20
È
Product matrix, page 387
Wiring diagrams and installation examples, page 451
Ordering data
Type
Article number
Packaging, carton
Packaging, carton
modularDIM BASIC
86454539
1 piece
10 piece
Speciic technical data
Type
modularDIM BASIC
436
Inputs
Outputs
Dimming momentaryaction switch
Presence sensor
Digital control line DSI
Control output per physical
output (devices)
Maximum DSI cable
length at 1.5 mm²
1-way / 2-way
3
3
100
250 m
www.tridonic.com
Catalogue 2012
ACCESSORIES
luxCONTROL lighting control system
DSI control units
modularDIM SC
Product description
• Optional expansion module for scene control
in the modularDIM system
• Retrieval and programming of up to 4 lighting scenes
• 4 SELV switch inputs for using conventional
momentary-action switches
• 4 outputs for status LEDs
Technical data
Input, 4 momentary-action switches
single
Ambient temperature ta
0 ... +50 °C
Type of protection
IP20
È
Product matrix, page 387
Wiring diagrams and installation examples, page 451
Ordering data
Article number
Packaging, carton
Packaging, carton
modularDIM SC
86454545
1 piece
10 piece
luxCONTROL lighting
control systems
Type
Catalogue 2012
www.tridonic.com
437
ACCESSORIES
luxCONTROL lighting control system
DSI control units
modularDIM DM
Product description
• Optional expansion module for daylight control
in the modularDIM system
• Simple programming of independent daylight
characteristics for each DSI group
• On/of switching of the daylight function
by means of conventional switches
Technical data
Input, light sensor
1
Input, switch man/auto
1
Ambient temperature ta
0 ... +50 °C
Type of protection
IP20
È
Product matrix, page 387
Wiring diagrams and installation examples, page 451
ACCESSORIES
Ordering data
Type
Article number
Packaging, carton
Packaging, carton
modularDIM DM
86454564
1 piece
10 piece
Accessories for modularDIM DM
Product description
• Ceiling sensor for measuring daylight
Ordering data
438
Type
Article number
Packaging, carton
Packaging, carton
Sensor DAYLIGHT
86454586
1 piece
40 pieces
www.tridonic.com
Catalogue 2012
ACCESSORIES
luxCONTROL lighting control system
DSI control units
modularDIM LC
Product description
• Optional expansion module for non-loating motion detectors
or momentary-action switches in the modularDIM system
Technical data
Rated supply voltage
220 – 240 V
Mains frequency
50 / 60 Hz
Max. output dielectric strength
30 V (SELV)
Input, with electrical isolation
4000 V 2 min.; 6 mm (SELV)
Ambient temperature ta
0 ... +50 °C
Type of protection
IP20
È
Product matrix, page 387
Wiring diagrams and installation examples, page 451
Ordering data
Article number
Packaging, carton
Packaging, carton
modularDIM LC
86457888
1 piece
10 piece
luxCONTROL lighting
control systems
Type
Catalogue 2012
www.tridonic.com
439
luxCONTROL lighting control system
DSI control units
DSI-IR
Control module with input for infra-red receiver
and single momentary-action switch
Product description
• DSI control module for infra-red receiver
and momentary-action switch input
• For a luminaire group of up to 25 DSI ballasts
• Input for one-way momentary-action switch for dimming
• Input for infra-red receiver IRED
Ê
For product data sheet go to www.tridonic.com,
or available on request
Technical data
Rated supply voltage
230 – 240 V
Mains frequency
50 / 60 Hz
Power
1W
Ambient temperature ta
-25 ... +60 °C
Type of protection
IP20
È
Product matrix, page 387
Wiring diagrams and installation examples, page 451
Ordering data
Type
Article number
Packaging, carton
Packaging, carton
DSI-IR
22114184
1 piece
10 piece
Speciic technical data
Type
DSI-IR
440
Inputs
Outputs
Dimming momentaryaction switch
Infra-red receiver
Max. sensor line
length
Digital control line DSI
Control output per physical
output (devices)
Maximum DSI cable
length at 1.5 mm²
1-way / 2-way
1
10 m
1
25
50 m
www.tridonic.com
Catalogue 2012
luxCONTROL lighting control system
DSI control units
DSI-2IR
Control module with input for infra-red receiver
and single momentary-action switch
Product description
• DSI control module for infra-red receiver
and momentary-action switch input
• For up to 2 luminaire groups each with
25 digital dimmable ballasts
• Input for 2 one-way momentary-action switches for dimming
• Input for infra-red receiver IRED
Ê
For product data sheet go to www.tridonic.com,
or available on request
Technical data
Rated supply voltage
230 – 240 V
Mains frequency
50 / 60 Hz
Power
1W
Ambient temperature ta
-25 ... +60 °C
Type of protection
IP20
È
Product matrix, page 387
Wiring diagrams and installation examples, page 451
Ordering data
Type
Article number
Packaging, carton
Packaging, carton
DSI-2IR
22114190
1 piece
10 piece
Speciic technical data
Inputs
Type
Infra-red receiver
Max. sensor line length
Digital control line DSI
Control output per physical
output (devices)
Maximum DSI cable
length at 1.5 mm²
1-way/2-way (per DSI output)
1
10 m
2
25
50 m
luxCONTROL lighting
control systems
DSI-2IR
Outputs
Dimming momentaryaction switch
Catalogue 2012
www.tridonic.com
441
ACCESSORIES
luxCONTROL lighting control system
DSI control units
IRS
Product description
• Optional infra-red remote control for DSI-IR and DSI-2IR
• For controlling up to 5 addressed DSI-IR / DSI-2IR control modules
• Storage and retrieval of three lighting scenarios
• Complete with wall bracket
ACCESSORIES
Ordering data
Type
Article number
Packaging, carton
IRS Infra-red remote control
20975492
1 piece
IRED
Product description
• Optional infra-red receiver for ceiling mounting
for DSI-IR and DSI-2IR
• Compact low-proile dimensions
Ordering data
442
Type
Article number
Packaging, carton
IRS Infra-red remote control
22114587
1 piece
www.tridonic.com
Catalogue 2012
luxCONTROL lighting control system
DSI control units
DSI-V/T
Control module for amplifying DSI signals or switch input
Product description
• Multi-functional DSI controller
• For amplifying the DSI signal for a maximum
of 50 DSI devices or for cascading long lines
• Special function for tunnel applications
• Function can be set via DIP switches
• Input for manual dimming
• Input for motion detector or momentaryaction switch for scene recall
• Diferent motion detector functions can be set
30
• One scene can be set and recalled
For product data sheet go to www.tridonic.com,
21
Ê
or available on request
Technical data
Rated supply voltage
159
147–150
120 – 277 V
50 / 60 Hz
Power
1W
Ambient temperature ta
-25 ... +60 °C
Type of protection
IP20
30
Mains frequency
È
Ordering data
Product matrix, page 387
Wiring diagrams and installation examples, page 451
Type
Article number
Packaging, carton
Packaging, carton
DSI-V/T
86458690
1 piece
10 piece
Speciic technical data
Inputs
Type
DSI-V/T
Outputs
Dimming momentaryaction switch
Presence sensor
DSI signal1
Digital control line DSI
Control output per physical
output (devices)
Maximum DSI cable
length at 1.5 mm²2
1-way / 2-way
1
1
1
50
250 m
luxCONTROL lighting
control systems
Strain-relief set
21
ACCESSORIES
1 One DSI-V/T corresponds to the DSI load of two DSI devices.
2 Max. cable length in tunnel/security mode = 500 m (DSI-V function only).
50
234
Ordering data
Catalogue 2012
Type
Article number
Packaging, carton
Strain-relief set
86458689
1 piece
www.tridonic.com
443
luxCONTROL lighting control system
DSI control units
Smart SWITCH II
Automatic switching based on presence and light level
Product description
• Motion detector for luminaire installation
• For automatic on/of switching of luminaires with electronic ballasts
• “Bright-Out” function: luminaire is not
switched on if there is adequate brightness
• Maximum of 1 sensor possible
• Low-proile casing (21 x 30 mm)
• For a maximum of 2 ECGs
• Delay time and light value for the “Bright-Out”
function can be set via 2 potentiometers
Ê
For product data sheet go to www.tridonic.com,
30
or available on request
7.5 VA
Output, standby
0.6 W
Ambient temperature ta
0 ... +60 °C
120
110
30
16
50 / 60 Hz
Power
30
220 – 240 V
Mains frequency
30
È
7,2
Rated supply voltage
21
Technical data
19
Product matrix, page 387
19
Wiring diagrams and installation examples, page 451
Ordering data
Type
Article number
Packaging, carton
Smart SWITCH II
86458452
10 pieces
Smart SWITCH strain relief
86458246
10 pieces
Speciic technical data
Type
Output, relay (L‘)
Inputs
Max. Smart SWITCH sensors
Sensor cable length
L‘ (switched phase)
Max. switching
output (e.g. PCA)
Max. switching
output [W]
Max. switching
output [VA]
Smart SWITCH II
1
0.50 m (can be extended to 2 m max.)
220 – 240 V
2
500 W
200 VA
Smart SWITCH strain relief
1
0.25 m (can be extended to 2 m max.)
220 – 240 V
2
500 W
200 VA
444
www.tridonic.com
Catalogue 2012
luxCONTROL lighting control system
DSI interface
DSI-A/D
Converter for 1...10 V into DSI signal 1-channel for installation in luminaire
Product description
• Converter for converting analogue signals into DSI signals
• For connecting DSI devices in 1...10 V control systems
• For a maximum of 50 DSI devices
• Constant lighting control possible via terminal
for Smart-LS II (article number: 86448347)
• On/of switching via separate switch input
Ê
For product data sheet go to www.tridonic.com,
or available on request
Technical data
Rated supply voltage
230 – 240 V
Mains frequency
50 / 60 Hz
Power
4W
Ambient temperature ta
0 ... +60 °C
Type of protection
IP20
È
Product matrix, page 387
Wiring diagrams and installation examples, page 451
Ordering data
Type
Article number
Packaging, carton
Packaging, carton
DSI-A/D
86453957
1 piece
10 piece
Speciic technical data
Inputs
Type
Dimming
DSI-A/D
1 ... 10 V
Dimming, potentiometer
(optional)1
47 (≥ 47 ≤ 100) kOhm
Outputs
ON/OFF switch
(220–240 V)
Ambient light
sensor
1
Digital control line DSI
1
Control output per physical
output (devices)
1
50
Maximum DSI cable
length at 1.5 mm²
100 m
luxCONTROL lighting
control systems
1 Potentiometer with linear characteristics, optimum: 47 kOhm, possible range: 47 – 100 kOhm; power ≥ 0.5 W.
Catalogue 2012
www.tridonic.com
445
luxCONTROL lighting control system
DSI interface
DSI-A/DS
Converter for 1...10 V into DSI signal 1-channel for installation
in switchgear cabinet
Product description
• Converter for converting analogue signals into DSI signals
• For installation in switching cabinets
• For connecting DSI devices in 1...10 V control systems
• For a maximum of 100 DSI devices
• On/of switching via separate switch input
Ê
For product data sheet go to www.tridonic.com,
or available on request
Technical data
Rated supply voltage
230 – 240 V
Mains frequency
50 / 60 Hz
Power
4W
Ambient temperature ta
0 ... +50 °C
Type of protection
IP20
È
Product matrix, page 387
Wiring diagrams and installation examples, page 451
Ordering data
Type
Article number
Packaging, carton
Packaging, carton
DSI-A/DS
86456111
1 piece
10 piece
Speciic technical data
Type
DSI-A/DS
Inputs
Outputs
Dimming
Dimming, potentiometer
(optional)1
ON/OFF switch
(220–240 V)
Digital control line DSI
Control output per physical
output (devices)
Maximum DSI cable
length at 1.5 mm²
1 ... 10 V
47 (≥ 47 ≤ 100) kOhm
1
1
100
250 m
1 Potentiometer with linear characteristics, optimum: 47 kOhm, possible range: 47 – 100 kOhm; power ≥ 0.5 W.
446
www.tridonic.com
Catalogue 2012
luxCONTROL lighting control system
DSI interface
NEW
KNX-DSI/S 6CH
Converter for KNX into DSI signals for installation in switch cabinet
Product description
• Converter for converting KNX signals into DSI signals
• For connecting digital DSI devices in KNX systems
• Real-time clock for controlling of time events
• 6 DSI outputs each for 50 DSI devices
• For installation in switching cabinets
• Status LED for indicating the operating status
• Test switch for installation test
Ê
For product data sheet go to www.tridonic.com,
or available on request
Technical data
110 – 240 V
Mains frequency
50 / 60 Hz
Power
5W
Storage temperature
-20 ... +70 °C
Ambient temperature ta
0 ... +50 °C
5 % ... max. 75 %
Type of protection
IP20
158
35
86
104
Humidity
45
59
Rated supply voltage
Ordering data
Type
Article number
Packaging, carton
KNX-DSI/S 6CH
24176093
1 piece
Speciic technical data
Type
Outputs
Digital control line DSI
Control output per physical
output (devices)
Maximum DSI cable
length at 1.5 mm²
KNX (TP-1)
6
50
250 m
luxCONTROL lighting
control systems
KNX-DSI/S 6CH
Inputs
Dimming / Switching / Reporting
Catalogue 2012
www.tridonic.com
447
NEW
luxCONTROL lighting control system
DSI interface
LON-DSI/S 6CH
Converter for LON into DSI signals for installation in switch cabinet
Product description
• Converter for converting LON signals into DSI signals
• For connecting digital DSI devices in LON systems
• Real-time clock for controlling of time events
• 6 DSI outputs each for 50 DSI devices
• For installation in switching cabinets
• Status LED for indicating the operating status
• Test switch for installation test
Ê
For product data sheet go to www.tridonic.com,
or available on request
45
Technical data
50 / 60 Hz
Power
5W
59
110 – 240 V
Mains frequency
Storage temperature
-20 ... +70 °C
Ambient temperature ta
0 ... +50 °C
Humidity
5 % ... max. 75 %(non-condensing)
Type of protection
IP20
158
01
N
02
L
03
E
MAINS
04 05
- LON +
TP/FT-10
11
12
13
35
14
15
16
DSI1
DSI2
DSI3
DSI1
DSI2
DSI3
17
18
19
20
DSI4
DSI5
DSI4
DSI5
21
22
DSI6
932-051.1-1
LON - DSI Interface
On
Off
Auto
On
Off
Auto
On
Off
Auto
DSI6
On
Off
Auto
On
Off
Auto
LON-DSI/S 6CH
PIN
Art.-Nr. 24176092
Power
110/240 V AC, 4 VA, 50/60 Hz, RH max 75%
Ta: 0°...50°C, Max 50 actuators/channel
LON Twisted Pair (TP/FT-10)
86
104
Rated supply voltage
LED
Service
Made in Sweden
932-051.2-1
932-051.3-1
31
N
32
L
33
E
MAINS
34 35
- LON +
Production Data:
TP/FT-10
Ordering data
Type
Article number
Packaging, carton
LON-DSI/S 6CH
24176092
1 piece
Speciic technical data
Type
LON-DSI/S 6CH
448
Inputs
Outputs
Dimming / Switching / Reporting
Digital control line DSI
Control output per physical output
(devices)
Maximum DSI cable
length at 1.5 mm²
LON (TP/FT-10)
6
50
250 m
www.tridonic.com
Catalogue 2012
luxCONTROL lighting control system
DSI actuator
DSI-PCD/S
Leading-edge/trailing-edge phase dimmer 40 – 1,000 VA with preset
Product description
• Digital leading-edge and trailing-edge phase dimmer
• Control via DSI signal or momentary-action switch
• Preset function: storage and retrieval of any lighting value
• With automatic load detection
• For installation in switching cabinets
• Status LED for indicating the operating status
Ê
For product data sheet go to www.tridonic.com,
or available on request
Technical data
Rated supply voltage
220 – 240 V
Mains frequency
50 / 60 Hz
Connected load
40 – 1,000 VA
Power loss
2 W (15 W at full load)
Ambient temperature ta
0 ... +40 °C
Type of protection
IP20
È
Product matrix, page 387
Wiring diagrams and installation examples, page 451
Ordering data
Type
Article number
Packaging, carton
DSI-PCD/S
22154333
1 pieces
Speciic technical data
Inputs
Type
Terminals
Single or twin momentaryaction switches
DSI control input
Dimmed phase
Control range,
output
1
1
1
1
0; 1 – 100 %
0.75 – 2.5 mm²
luxCONTROL lighting
control systems
DSI-PCD/S
Outputs
Momentary-action switch
input for preset retrieval
Catalogue 2012
www.tridonic.com
449
luxCONTROL lighting control system
DSI actuator
DSI-RK
Relay module for switching ohmic loads
Product description
• Relay module
• For switching ohmic loads
• Operation via momentary-action switch (switchDIM) or DSI signal
• Parametrisation (RELAY-ON, RELAY-OFF) via conigTOOL software
• Floating switching output
Ê
For product data sheet go to www.tridonic.com,
or available on request
Technical data
Rated supply voltage
220 – 240 V
Mains frequency
50 / 60 Hz
Ambient temperature ta
0 ... +60 °C
Type of protection
IP20
È
Product matrix, page 387
Wiring diagrams and installation examples, page 451
Ordering data
Type
Article number
Packaging, carton
Packaging, carton
DSI-RK
86449304
1 piece
10 piece
Speciic technical data
Type
DSI-RK
450
Input
DSI/switchDIM
Output, relay
Relay, loating
Switching output (at 110 V DC max.)
Switching output (at 250 V AC max.)
Make contact
110 W / 1 A
500 W / 2 A
www.tridonic.com
Catalogue 2012
luxCONTROL lighting control systems
Wiring diagrams and installation examples
DALI MSensor 02
DALI MSensor 02
DALI
USB
DALI modules in a network
PCA ECO
Z II
DALI
USB
DALI TOUCHPANEL 02
DALI GC, double push to make switches
DALI SC
DALI MC
luxCONTROL lighting
control systems
DALI GC, single push to make switches
DALI MC
Catalogue 2012
www.tridonic.com
451
luxCONTROL lighting control systems
Wiring diagrams and installation examples
DALI TOUCHPANEL 02
DALI x/e-touchPANEL 02
PCA ECO Z II
DALI
USB
x/e-touchPANEL 02
DALI SQM
PCA ECO Z II
DALI
USB
452
www.tridonic.com
Catalogue 2012
luxCONTROL lighting control systems
Wiring diagrams and installation examples
DALI PS
DALI PS1
DALI PS2
L
N
DALI
PS2
PCA EXCEL one4all
PCA ECO z II
DALI
DALI
GC
DALI
GC
DALI
SC
DALI
USB
DALI PS2 standby
N
L
L’
N
L
*
L
DALI PS2
standby
DA
R1
PCA ECO
Y II
PCA EXCEL
one4all
R2
DA
DALI
GC
luxCONTROL lighting
control systems
N
DALI
SC
* DALI control modules that have their own power supply must not be connected to the switched phase L’
** The inrush currents of the ECG must be taken into account when dimensioning the contactor
Catalogue 2012
www.tridonic.com
453
luxCONTROL lighting control systems
Wiring diagrams and installation examples
DALI USB
DALI DSI
DALI DSI II
DALI Repeater – with one controller
x/e-touchPANEL 02
454
www.tridonic.com
Catalogue 2012
luxCONTROL lighting control systems
Wiring diagrams and installation examples
DALI Repeater – with multiple controllers
x/e-touchPANEL 02
DALI Somfy animeo interface
PCA ECO Z II
* Please refer to the instructions for using the animeo IB+ motor controllers
luxCONTROL lighting
control systems
DALI 3-RM-C
DALI
USB
Catalogue 2012
www.tridonic.com
455
luxCONTROL lighting control systems
Wiring diagrams and installation examples
DALI PCD 300 one4all
switchDIM
switchDIM
switchDIM
DALI PCD/S – circuit 1
modularDIM Basic
smartDIM SM
modularDIM Basic
smartDIM SM
***
***
**
****
*
**
***
****
****
Single switch control
Do not use these terminals if the switch terminals are used
Low-voltage halogen incandescent lamps
Do not use these terminals, if the terminals DA/D1 and DA/D2 are used
DALI-PCD/S – circuit 2
***
***
**
****
*
**
***
****
456
****
Single switch control
Do not use these terminals if the switch terminals are used
Low-voltage halogen incandescent lamps
Do not use these terminals, if the terminals DA/D1 and DA/D2 are used
www.tridonic.com
Catalogue 2012
luxCONTROL lighting control systems
Wiring diagrams and installation examples
SMART Sensor 5D 19f
ON/OFF switch directly via mains voltage
corridorFUNCTION with external motion sensor
PCA EXCEL one4all / PCA ECO / PCA BASIC
PCA EXCEL one4all / PCA ECO / PCA BASIC
DA/D1
DA/D1
DA/D2
DA/D2
DSI/DALI
switchDIM
PCA EXCEL one4all / PCA ECO / PCA BASIC*
DALI
PCA EXCEL one4all / PCA ECO / PCA BASIC
N
L
DA/D1
DSI
DA/D2
DA/D1
DA/D2
SMART Sensor 5DP 19f
corridorFUNCTION with integrated motion sensor
corridorFUNCTION with external motion sensor
PCA EXCEL one4all
PCA EXCEL one4all
DA
DA
DA
DA
switchDIM
PCA EXCEL one4all
DALI
PCA EXCEL one4all
N
L
DA
DSI
Catalogue 2012
luxCONTROL lighting
control systems
DSI/DALI
DA
www.tridonic.com
DA
DA
457
luxCONTROL lighting control systems
Wiring diagrams and installation examples
SMART Sensor 5DPI 19f / SMART Sensor 10DPI 19f
corridorFUNCTION with integrated motion sensor
corridorFUNCTION with external motion sensor
PCA EXCEL one4all
PCA EXCEL one4all
DA
DA
DA
DA
PCA EXCEL one4all
PCA EXCEL one4all
DA
DA
DA
DA
optional
optional
SMART Sensor Extension
Cable (art.no. 86459176)
SMART Sensor Extension
Cable (art.no. 86459176)
DSI/DALI
switchDIM
PCA EXCEL one4all
DALI
PCA EXCEL one4all
N
L
DA
DSI
DA
DA
DA
PCA EXCEL one4all
PCA EXCEL one4all
DA
DA
DA
DA
optional
optional
SMART Sensor Extension
Cable (art.no. 86459176)
458
SMART Sensor Extension
Cable (art.no. 86459176)
www.tridonic.com
Catalogue 2012
luxCONTROL lighting control systems
Wiring diagrams and installation examples
DSI SMART PTM – luminaire installation / surface mounting
L
N
*
N
L
2
3
4
DSI-SMART PTM
PCA
max. 4 DSI or
DALI ballasts
6 D1 / DA
7 D2 / DA
DSI/DALI
2
3
4
PCA
6 D1 / DA
7 D2 / DA
* must be the same phase
as for L
DSI SMART PTM – ceiling installation
L
N
*
N
L
2
3
4
DSI-SMART PTM
PCA
max. 4 DSI or
DALI ballasts
6 D1 / DA
7 D2 / DA
DSI/DALI
2
3
4
PCA
6 D1 / DA
7 D2 / DA
* must be the
same phase
as for L
Sensor
smartDIM SM lp
PCA
PCA
smartDIM SM lp
Catalogue 2012
www.tridonic.com
smartDIM
Sensor
luxCONTROL lighting
control systems
smartDIM
Sensor
459
luxCONTROL lighting control systems
Wiring diagrams and installation examples
modularDIM
modularDIM DM
modularDIM BASIC
PCA
modularDIM LC
modularDIM SC
LCA
PCD
max. 100 PCA / TE one4all / PCD / LCA
PCA
LCA
PCD
max. 100 PCA / TE one4all / PCD / LCA
PCA
460
TE
one4all
www.tridonic.com
PCD
max. 100 PCA / TE one4all / PCD / LCA
Catalogue 2012
luxCONTROL lighting control systems
Wiring diagrams and installation examples
DSI-IR
PCD
LCA
PCA
max. 25 DSI
ballasts
DSI bus
IRED
(IR-receiver)
push to make
switches
DSI-2IR
PCA
PCA
LCA
PCD
luxCONTROL lighting
control systems
PCD
Catalogue 2012
www.tridonic.com
461
luxCONTROL lighting control systems
Wiring diagrams and installation examples
DSI-V/T – DSI-T function
PCD
LCA
PCA
max. 50 DSI
ballasts
DSI signal
DSI-V/T – DSI-V function
DSI
ballast
DSI OUT
max. 50 DSI
ballasts
Cable length: Cable lengths of up to 500 m can be achieved by concatenating individual DSI-V/Ts. This maximum cable length can only be guaranteed
in DSI-V mode if the DSI-V/T is operated as the only load, otherwise the maximum cable length is 250 m for a 1.5 mm².
462
www.tridonic.com
Catalogue 2012
luxCONTROL lighting control systems
Wiring diagrams and installation examples
Smart SWITCH II
L
N
PE
0.5 m
L
N Smart SWITCH
L‘
PIR
(bright out)
L‘
e.g. PC PRO T5
e.g. PC PRO T5
L
N
PE
0.5 m
L
N Smart SWITCH
L‘
PIR
(bright out)
L‘
2
3
4
DA / D1
DA / D2
16
15
14
13
12
11
10
9
2
3
4
6
7
PE
L
N
DA / D1
DA / D2
16
15
14
13
12
11
10
9
luxCONTROL lighting
control systems
6
7
PE
L
N
Catalogue 2012
www.tridonic.com
463
luxCONTROL lighting control systems
Wiring diagrams and installation examples
DSI-A/D
PCD
LCA
PCA
max. 50 DSI
ballasts
Smart-LS II (Art-Nr. 86448347) **
Smart-LS II lp (Art-Nr. 86458258) **
* If potentiometer with linear characteristic optimum 47 kΩ (47-100 kΩ possible), load ≥ 0.5 W
** If a Smart-LS II sensor is connected, the 1...10 V function is disabled
DSI-A/DS
PCD
LCA
PCA
max. 100 DSI
ballasts
* If potentiometer with linear characteristic optimum 47 kΩ (47-100 kΩ possible), load ≥ 0.5 W
464
www.tridonic.com
Catalogue 2012
luxCONTROL lighting control systems
Wiring diagrams and installation examples
DSI-PCD/S
modularDIM Basic
smartDIM SM
modularDIM Basic
smartDIM SM
***
***
**
****
*
**
***
****
DSI-RK (DSI)
****
Single switch control
Do not use these terminals if the switch terminals are used
Low-voltage halogen incandescent lamps
Do not use these terminals, if the terminals DA/D1 and DA/D2 are used
DSI-RK (switchDIM)
L
N
IN
DSI-RK
OUT
luxCONTROL lighting
control systems
push to make
switches
1
2
3
4
5
6
7
Catalogue 2012
www.tridonic.com
465
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement