DC-196 - Milab USA
DC-196
Condenser Microphone
The DC-196 condenser microphone is designed for
professional vocal and instrumental work, both on
stage and in the studio. This microphone contains a
large, rectangular membrane capsule that provides
a full-bodied, exceptionally clean sound with natural
brightness. The DC-196 has a variable polar pattern that
is easily adjusted with a knob into three positions: omni,
cardioid, and figure-eight. It is equipped with -12dB
pre-attenuation, and is able to handle sound pressure
levels (SPL) higher than 144dB.
The body of the DC-196 is made of solid brass, and
connects with a standard 3-pin XLR connector. It is
packaged in a black leatherette box and comes with a
suspension shockmount. An individual frequency curve
is also included.
Specifications
Polar patterns: cardioid, omni, & figure-eight
Frequency response: 20 Hz to 20 kHz
Frequency Chart: DC-196
Pre-attenuation (switchable): -12 dB
50
Max SPL (1% THD @ 1 kHz): 132 / 144 dB
Sensitivity @ 1 kHz: 21.5 mV / Pa ± 1 dB
A-weighted noise level (IEC 179-A): 12 DB
Power supply: 48 V ± 4 V phantom
Current consumption: 4.2 mA
40
30
dB
20
10
0
20
50
0°
100
200
500
Hz 1k
2k
5k
10k
20k
180°
Output impedance: < 200 Ω
Minimum load impedance: 1 k Ω
Connector: 3-pin XLR
Exclusively distributed in the Americas by
Length: 5.71" (145 mm)
Diameter: 1.06" (27 mm)
Weight: 8.11 oz. (230 g)
milabusa.com
9770 Silicon Prairie Pkwy • Madison, WI 53593-8442 USA
tel: 608-227-2040 • fax: 608-831-1890
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising