Epson | 436Wi | Start Here Guide | Epson 436Wi Start Here Guide

4 UsetheInteractivePen
Your projector came with one pen (Interactive Pen A)
with an orange-colored end. If you want to use dual pen
interactivity and annotation, you will need to purchase
the optional Interactive Pen B with a blue-colored end
(part number V12H523001).
Battery light
Power switch
5 UsePCFreeAnnotation
ChoosingtheRightTool
If you already have annotation software, you can use
it with BrightLink. If you are using Microsoft® Office
2003 or later, you can also use the “inking tools” to add
handwritten notes to your documents and PowerPoint®
presentations.
The projector’s built-in toolbar lets you annotate images
from other devices that have been connected to the
projector, such as a document camera, tablet, or other
source.
1
Here are some tips on choosing among the tools that
came with your BrightLink projector:
light comes on briefly. If the battery is low, the light
flashes.
• Hold the pen perpendicular to the board, as shown
TeamBoard Draw
• To turn on the pen, slide the power switch. The green
Easy Interactive Tools
Built-In Toolbar
Press one of the Source buttons on the remote
control to select the source for the image you want
to annotate.
Image from a
computer connected
to the Computer1
or Computer2 port
Image from a computer with
an HDMI connection, or a
video player
2
below.
Image from an
external device
connected to the
USB port
Image from a computer or
iPad connected through a
wired or wireless network
To activate the toolbar, tap the board with the pen.
If you don’t see the
icon, tap the
icon and
then tap the
icon.
Note: If you see either icon, you are already in PC
Free Annotation mode.
Annotate on computer display
•
•
•
Annotate on white
background
•
•
•
Annotate on images from
document cameras or other
sources
•
3
• To left-click, tap on the board.
Use two pens simultaneously
•
Note: Many of the built-in tools are the same as Easy
Interactive Tools, but fewer functions are available.
• To double-click, tap twice.
Save annotations
• To right-click, press the board with the pen for about
Record lessons and import/
export files
3 seconds.
•
•
To close the toolbar, select the
bottom of the toolbar.
icon at the
•
BrightLinkInteraction
Two different toolbars are available in PC Free Annotation
mode, one for annotation mode and one for whiteboard
annotation mode.
The BrightLink interactive pen turns any wall or table into
an interactive area, either with or without a computer.
• Annotation mode displays the built-in toolbar on
• With a computer, you can use Easy
whatever image is being projected.
Interactive Tools (dual pens). This
software lets you use the interactive pen
as a mouse to annotate, save, and interact
with content from your computer.
• Whiteboard annotation mode lets you project a white
or black screen or background pattern, and use the
pen to write or draw as you would on a chalkboard or
dry erase board.
Select annotation
mode
Undo
Stop or resume action
in a video*
Select whiteboard
annotation mode
Redo
Zoom into image
Recalibrate
Change custom pen
color and width
Change highlighter
color
Use black, red, or
blue pen—select
small dot for thin line
Erase—select small
dot for thin eraser
Hide toolbar after
each annotation
Use custom pen
Use highlighter
Use black, red, or blue
pen—select large dot
for thick line
Erase—select large dot
for thick eraser
Clear all annotations
Close toolbar
* In annotation mode, the
select background tool appears instead of
this one. It lets you select the background color or pattern.
•
• To click and drag, tap and drag with the pen.
• Without a computer, you can use the
StartHere
Follow the steps on this card to get started with your
BrightLink:
1
Connect your computer and turn on the projector
2
Make sure the software is installed
3
Calibrate
• Using the remote control
• To move the cursor, hover over the board without
touching it.
4
• When you are finished, slide the power switch to turn
Use the interactive pen
• Choosing the right tool
off the pen.
Ready to Learn More?
Note: The pen turns off automatically after about 20
minutes of inactivity. Slide the switch to turn the pen
back on.
• Sign up for complimentary webinars
• Watch helpful how-to videos
EPSON and BrightLink are registered trademarks and EPSON Exceed Your Vision
is a registered logomark of Seiko Epson Corporation.
General Notice: Other product names used herein are for identification purposes
only and may be trademarks of their respective owners. Epson disclaims any and
all rights in those marks.
This information is subject to change without notice.
© 2012 Epson America, Inc. 11/12
Printed in USA
CPD-38383
• Find out about cool, free interactive sites
Click the BrightLink Training Resources
link on your desktop or go to
www.epson.com/eduresources.
5
Use PC Free Annotation
toolbar that is built into the projector
(PC Free Annotation). This lets you
annotate images from a document
camera, tablet, DVD player, or other
source connected to your projector.
Students and colleagues can connect
their own laptops and annotate on the
fly using the built-in toolbar, without
installing software.
Get a DVD containing BrightLink
training videos!
Just click the BrightLink Training
Resources link on your desktop or go
to www.epson.com/eduresources
and request a DVD.
2 Make Sure the Software Is Installed
1 Connect Your Computer and
Turn on the Projector
1
onnect the USB cable from the projector’s USB
C
TypeB port directly to any available USB port on
your computer.
4
doesn’t appear, try one of the following:
• On some Windows laptops, you may need to
Display an image from your computer. If the image
hold down the Fn key on the keyboard and press
F7 or the function key that lets you display on
an external monitor. It may have an icon such as
, or it may be labelled CRT/LCD.
• On a Mac, you may need to open System
Preferences and select Displays. Select the
VGA Display or Color LCD option if necessary,
then click the Arrange or Arrangement tab,
and select the Mirror Displays check box.
Here’s how to find out if the software is installed on your
computer:
If you need to install the software
Do one of the following:
• Use the CD that came with the projector, labeled
“EPSON Projector Software for Easy Interactive
Function”
If you are using a Mac:
Look for the Easy Interactive Driver and Easy Interactive
Tools folders in the Application folder on your hard drive.
If you see these folders, the software is installed.
1
2
• Try pressing the Source Search button on the
• Download the most up-to-date version from:
epson.com/brightlinkdownloads (U.S.)
epson.ca/brightlinkdownloads (Canada)
Connect an HDMI or VGA cable from the projector
to your computer.
HDMI
or more information about Easy Interactive Tools, see
F
the Easy Interactive Tool Tips sheet in this Welcome Kit
or the BrightLink User’s Guide.
VGA
You can also install TeamBoard Draw, an intermediate
level annotation program, from the CD that came with the
projector.
3
urn on the projector by pressing the red
T
button on the remote control.
In Windows®, you may see messages about device
drivers or new hardware.
power
Calibration coordinates the position of the pen with the
location of your cursor. If the pen position and cursor
location don’t match, you can try auto calibration, or you
can calibrate manually for even greater accuracy. You
don’t need a computer, and you won’t need to calibrate
again unless the projector or image is moved, or the
image is resized.
If you are using Windows:
Select
or Start > All Programs or Programs >
EPSON Projector > Easy Interactive Tools Ver.2.x.x.
If you see Easy Interactive Tools Ver. 2.x.x, the software
is installed.
Using the Remote
Control
Turn projector
on/off
Select from various
image sources
connected to the
projector
o start calibration, press the User button on the
T
remote control.
When you see the Auto Calibration screen, do one
remote control.
USB cable
2
You may already have the software on your computer,
or you may need to install it yourself. For Mac OS X, you
need Easy Interactive Driver and Easy Interactive Tools.
For Windows, you only need Easy Interactive Tools.
3 Calibrate
of the following:
• Press Enter to try auto calibration, then wait until
calibration is complete.
• Select No, then press Enter and follow the steps
below to calibrate manually.
you see this screen, select Manual
3When
Calibration, then press Enter.
Access menu
system for
additional
adjustments
Switch between
computer and Easy
Interactive Pen
Enter
Calibrate
Zoom in and out
Page through
documents
Temporarily
turn off image
Stop video action
For more information on using the remote control and
cool time-saving buttons:
• See the on-screen BrightLink User’s Guide.
• Go to the training section and watch a video or two at
4
Yes.
5
ouch the circles on the screen to perform manual
T
calibration.
When you see this screen, press Enter to select
For more information, see the TeamBoard Draw Tips
sheet in this Welcome Kit or the TeamBoard videos at
epson.com/brightlink (U.S.) or epson.ca/brightlink
(Canada).
If the software is not installed, follow the steps in the next
column to install it.
For more detailed instructions, see the on-screen
BrightLink User’s Guide.
epson.com/brightlinkvideos (U.S.) or
epson.ca/brightlinkvideos (Canada).
2 Make Sure the Software Is Installed
1 Connect Your Computer and
Turn on the Projector
1
onnect the USB cable from the projector’s USB
C
TypeB port directly to any available USB port on
your computer.
4
doesn’t appear, try one of the following:
• On some Windows laptops, you may need to
Display an image from your computer. If the image
hold down the Fn key on the keyboard and press
F7 or the function key that lets you display on
an external monitor. It may have an icon such as
, or it may be labelled CRT/LCD.
• On a Mac, you may need to open System
Preferences and select Displays. Select the
VGA Display or Color LCD option if necessary,
then click the Arrange or Arrangement tab,
and select the Mirror Displays check box.
Here’s how to find out if the software is installed on your
computer:
If you need to install the software
Do one of the following:
• Use the CD that came with the projector, labeled
“EPSON Projector Software for Easy Interactive
Function”
If you are using a Mac:
Look for the Easy Interactive Driver and Easy Interactive
Tools folders in the Application folder on your hard drive.
If you see these folders, the software is installed.
1
2
• Try pressing the Source Search button on the
• Download the most up-to-date version from:
epson.com/brightlinkdownloads (U.S.)
epson.ca/brightlinkdownloads (Canada)
Connect an HDMI or VGA cable from the projector
to your computer.
HDMI
or more information about Easy Interactive Tools, see
F
the Easy Interactive Tool Tips sheet in this Welcome Kit
or the BrightLink User’s Guide.
VGA
You can also install TeamBoard Draw, an intermediate
level annotation program, from the CD that came with the
projector.
3
urn on the projector by pressing the red
T
button on the remote control.
In Windows®, you may see messages about device
drivers or new hardware.
power
Calibration coordinates the position of the pen with the
location of your cursor. If the pen position and cursor
location don’t match, you can try auto calibration, or you
can calibrate manually for even greater accuracy. You
don’t need a computer, and you won’t need to calibrate
again unless the projector or image is moved, or the
image is resized.
If you are using Windows:
Select
or Start > All Programs or Programs >
EPSON Projector > Easy Interactive Tools Ver.2.x.x.
If you see Easy Interactive Tools Ver. 2.x.x, the software
is installed.
Using the Remote
Control
Turn projector
on/off
Select from various
image sources
connected to the
projector
o start calibration, press the User button on the
T
remote control.
When you see the Auto Calibration screen, do one
remote control.
USB cable
2
You may already have the software on your computer,
or you may need to install it yourself. For Mac OS X, you
need Easy Interactive Driver and Easy Interactive Tools.
For Windows, you only need Easy Interactive Tools.
3 Calibrate
of the following:
• Press Enter to try auto calibration, then wait until
calibration is complete.
• Select No, then press Enter and follow the steps
below to calibrate manually.
you see this screen, select Manual
3When
Calibration, then press Enter.
Access menu
system for
additional
adjustments
Switch between
computer and Easy
Interactive Pen
Enter
Calibrate
Zoom in and out
Page through
documents
Temporarily
turn off image
Stop video action
For more information on using the remote control and
cool time-saving buttons:
• See the on-screen BrightLink User’s Guide.
• Go to the training section and watch a video or two at
4
Yes.
5
ouch the circles on the screen to perform manual
T
calibration.
When you see this screen, press Enter to select
For more information, see the TeamBoard Draw Tips
sheet in this Welcome Kit or the TeamBoard videos at
epson.com/brightlink (U.S.) or epson.ca/brightlink
(Canada).
If the software is not installed, follow the steps in the next
column to install it.
For more detailed instructions, see the on-screen
BrightLink User’s Guide.
epson.com/brightlinkvideos (U.S.) or
epson.ca/brightlinkvideos (Canada).
2 Make Sure the Software Is Installed
1 Connect Your Computer and
Turn on the Projector
1
onnect the USB cable from the projector’s USB
C
TypeB port directly to any available USB port on
your computer.
4
doesn’t appear, try one of the following:
• On some Windows laptops, you may need to
Display an image from your computer. If the image
hold down the Fn key on the keyboard and press
F7 or the function key that lets you display on
an external monitor. It may have an icon such as
, or it may be labelled CRT/LCD.
• On a Mac, you may need to open System
Preferences and select Displays. Select the
VGA Display or Color LCD option if necessary,
then click the Arrange or Arrangement tab,
and select the Mirror Displays check box.
Here’s how to find out if the software is installed on your
computer:
If you need to install the software
Do one of the following:
• Use the CD that came with the projector, labeled
“EPSON Projector Software for Easy Interactive
Function”
If you are using a Mac:
Look for the Easy Interactive Driver and Easy Interactive
Tools folders in the Application folder on your hard drive.
If you see these folders, the software is installed.
1
2
• Try pressing the Source Search button on the
• Download the most up-to-date version from:
epson.com/brightlinkdownloads (U.S.)
epson.ca/brightlinkdownloads (Canada)
Connect an HDMI or VGA cable from the projector
to your computer.
HDMI
or more information about Easy Interactive Tools, see
F
the Easy Interactive Tool Tips sheet in this Welcome Kit
or the BrightLink User’s Guide.
VGA
You can also install TeamBoard Draw, an intermediate
level annotation program, from the CD that came with the
projector.
3
urn on the projector by pressing the red
T
button on the remote control.
In Windows®, you may see messages about device
drivers or new hardware.
power
Calibration coordinates the position of the pen with the
location of your cursor. If the pen position and cursor
location don’t match, you can try auto calibration, or you
can calibrate manually for even greater accuracy. You
don’t need a computer, and you won’t need to calibrate
again unless the projector or image is moved, or the
image is resized.
If you are using Windows:
Select
or Start > All Programs or Programs >
EPSON Projector > Easy Interactive Tools Ver.2.x.x.
If you see Easy Interactive Tools Ver. 2.x.x, the software
is installed.
Using the Remote
Control
Turn projector
on/off
Select from various
image sources
connected to the
projector
o start calibration, press the User button on the
T
remote control.
When you see the Auto Calibration screen, do one
remote control.
USB cable
2
You may already have the software on your computer,
or you may need to install it yourself. For Mac OS X, you
need Easy Interactive Driver and Easy Interactive Tools.
For Windows, you only need Easy Interactive Tools.
3 Calibrate
of the following:
• Press Enter to try auto calibration, then wait until
calibration is complete.
• Select No, then press Enter and follow the steps
below to calibrate manually.
you see this screen, select Manual
3When
Calibration, then press Enter.
Access menu
system for
additional
adjustments
Switch between
computer and Easy
Interactive Pen
Enter
Calibrate
Zoom in and out
Page through
documents
Temporarily
turn off image
Stop video action
For more information on using the remote control and
cool time-saving buttons:
• See the on-screen BrightLink User’s Guide.
• Go to the training section and watch a video or two at
4
Yes.
5
ouch the circles on the screen to perform manual
T
calibration.
When you see this screen, press Enter to select
For more information, see the TeamBoard Draw Tips
sheet in this Welcome Kit or the TeamBoard videos at
epson.com/brightlink (U.S.) or epson.ca/brightlink
(Canada).
If the software is not installed, follow the steps in the next
column to install it.
For more detailed instructions, see the on-screen
BrightLink User’s Guide.
epson.com/brightlinkvideos (U.S.) or
epson.ca/brightlinkvideos (Canada).
4 UsetheInteractivePen
Your projector came with one pen (Interactive Pen A)
with an orange-colored end. If you want to use dual pen
interactivity and annotation, you will need to purchase
the optional Interactive Pen B with a blue-colored end
(part number V12H523001).
Battery light
Power switch
5 UsePCFreeAnnotation
ChoosingtheRightTool
If you already have annotation software, you can use
it with BrightLink. If you are using Microsoft® Office
2003 or later, you can also use the “inking tools” to add
handwritten notes to your documents and PowerPoint®
presentations.
The projector’s built-in toolbar lets you annotate images
from other devices that have been connected to the
projector, such as a document camera, tablet, or other
source.
1
Here are some tips on choosing among the tools that
came with your BrightLink projector:
light comes on briefly. If the battery is low, the light
flashes.
• Hold the pen perpendicular to the board, as shown
TeamBoard Draw
• To turn on the pen, slide the power switch. The green
Easy Interactive Tools
Built-In Toolbar
Press one of the Source buttons on the remote
control to select the source for the image you want
to annotate.
Image from a
computer connected
to the Computer1
or Computer2 port
Image from a computer with
an HDMI connection, or a
video player
2
below.
Image from an
external device
connected to the
USB port
Image from a computer or
iPad connected through a
wired or wireless network
To activate the toolbar, tap the board with the pen.
If you don’t see the
icon, tap the
icon and
then tap the
icon.
Note: If you see either icon, you are already in PC
Free Annotation mode.
Annotate on computer display
•
•
•
Annotate on white
background
•
•
•
Annotate on images from
document cameras or other
sources
•
3
• To left-click, tap on the board.
Use two pens simultaneously
•
Note: Many of the built-in tools are the same as Easy
Interactive Tools, but fewer functions are available.
• To double-click, tap twice.
Save annotations
• To right-click, press the board with the pen for about
Record lessons and import/
export files
3 seconds.
•
•
To close the toolbar, select the
bottom of the toolbar.
icon at the
•
BrightLinkInteraction
Two different toolbars are available in PC Free Annotation
mode, one for annotation mode and one for whiteboard
annotation mode.
The BrightLink interactive pen turns any wall or table into
an interactive area, either with or without a computer.
• Annotation mode displays the built-in toolbar on
• With a computer, you can use Easy
whatever image is being projected.
Interactive Tools (dual pens). This
software lets you use the interactive pen
as a mouse to annotate, save, and interact
with content from your computer.
• Whiteboard annotation mode lets you project a white
or black screen or background pattern, and use the
pen to write or draw as you would on a chalkboard or
dry erase board.
Select annotation
mode
Undo
Stop or resume action
in a video*
Select whiteboard
annotation mode
Redo
Zoom into image
Recalibrate
Change custom pen
color and width
Change highlighter
color
Use black, red, or
blue pen—select
small dot for thin line
Erase—select small
dot for thin eraser
Hide toolbar after
each annotation
Use custom pen
Use highlighter
Use black, red, or blue
pen—select large dot
for thick line
Erase—select large dot
for thick eraser
Clear all annotations
Close toolbar
* In annotation mode, the
select background tool appears instead of
this one. It lets you select the background color or pattern.
•
• To click and drag, tap and drag with the pen.
• Without a computer, you can use the
StartHere
Follow the steps on this card to get started with your
BrightLink:
1
Connect your computer and turn on the projector
2
Make sure the software is installed
3
Calibrate
• Using the remote control
• To move the cursor, hover over the board without
touching it.
4
• When you are finished, slide the power switch to turn
Use the interactive pen
• Choosing the right tool
off the pen.
Ready to Learn More?
Note: The pen turns off automatically after about 20
minutes of inactivity. Slide the switch to turn the pen
back on.
• Sign up for complimentary webinars
• Watch helpful how-to videos
EPSON and BrightLink are registered trademarks and EPSON Exceed Your Vision
is a registered logomark of Seiko Epson Corporation.
General Notice: Other product names used herein are for identification purposes
only and may be trademarks of their respective owners. Epson disclaims any and
all rights in those marks.
This information is subject to change without notice.
© 2012 Epson America, Inc. 11/12
Printed in USA
CPD-38383
• Find out about cool, free interactive sites
Click the BrightLink Training Resources
link on your desktop or go to
www.epson.com/eduresources.
5
Use PC Free Annotation
toolbar that is built into the projector
(PC Free Annotation). This lets you
annotate images from a document
camera, tablet, DVD player, or other
source connected to your projector.
Students and colleagues can connect
their own laptops and annotate on the
fly using the built-in toolbar, without
installing software.
Get a DVD containing BrightLink
training videos!
Just click the BrightLink Training
Resources link on your desktop or go
to www.epson.com/eduresources
and request a DVD.
4 UsetheInteractivePen
Your projector came with one pen (Interactive Pen A)
with an orange-colored end. If you want to use dual pen
interactivity and annotation, you will need to purchase
the optional Interactive Pen B with a blue-colored end
(part number V12H523001).
Battery light
Power switch
5 UsePCFreeAnnotation
ChoosingtheRightTool
If you already have annotation software, you can use
it with BrightLink. If you are using Microsoft® Office
2003 or later, you can also use the “inking tools” to add
handwritten notes to your documents and PowerPoint®
presentations.
The projector’s built-in toolbar lets you annotate images
from other devices that have been connected to the
projector, such as a document camera, tablet, or other
source.
1
Here are some tips on choosing among the tools that
came with your BrightLink projector:
light comes on briefly. If the battery is low, the light
flashes.
• Hold the pen perpendicular to the board, as shown
TeamBoard Draw
• To turn on the pen, slide the power switch. The green
Easy Interactive Tools
Built-In Toolbar
Press one of the Source buttons on the remote
control to select the source for the image you want
to annotate.
Image from a
computer connected
to the Computer1
or Computer2 port
Image from a computer with
an HDMI connection, or a
video player
2
below.
Image from an
external device
connected to the
USB port
Image from a computer or
iPad connected through a
wired or wireless network
To activate the toolbar, tap the board with the pen.
If you don’t see the
icon, tap the
icon and
then tap the
icon.
Note: If you see either icon, you are already in PC
Free Annotation mode.
Annotate on computer display
•
•
•
Annotate on white
background
•
•
•
Annotate on images from
document cameras or other
sources
•
3
• To left-click, tap on the board.
Use two pens simultaneously
•
Note: Many of the built-in tools are the same as Easy
Interactive Tools, but fewer functions are available.
• To double-click, tap twice.
Save annotations
• To right-click, press the board with the pen for about
Record lessons and import/
export files
3 seconds.
•
•
To close the toolbar, select the
bottom of the toolbar.
icon at the
•
BrightLinkInteraction
Two different toolbars are available in PC Free Annotation
mode, one for annotation mode and one for whiteboard
annotation mode.
The BrightLink interactive pen turns any wall or table into
an interactive area, either with or without a computer.
• Annotation mode displays the built-in toolbar on
• With a computer, you can use Easy
whatever image is being projected.
Interactive Tools (dual pens). This
software lets you use the interactive pen
as a mouse to annotate, save, and interact
with content from your computer.
• Whiteboard annotation mode lets you project a white
or black screen or background pattern, and use the
pen to write or draw as you would on a chalkboard or
dry erase board.
Select annotation
mode
Undo
Stop or resume action
in a video*
Select whiteboard
annotation mode
Redo
Zoom into image
Recalibrate
Change custom pen
color and width
Change highlighter
color
Use black, red, or
blue pen—select
small dot for thin line
Erase—select small
dot for thin eraser
Hide toolbar after
each annotation
Use custom pen
Use highlighter
Use black, red, or blue
pen—select large dot
for thick line
Erase—select large dot
for thick eraser
Clear all annotations
Close toolbar
* In annotation mode, the
select background tool appears instead of
this one. It lets you select the background color or pattern.
•
• To click and drag, tap and drag with the pen.
• Without a computer, you can use the
StartHere
Follow the steps on this card to get started with your
BrightLink:
1
Connect your computer and turn on the projector
2
Make sure the software is installed
3
Calibrate
• Using the remote control
• To move the cursor, hover over the board without
touching it.
4
• When you are finished, slide the power switch to turn
Use the interactive pen
• Choosing the right tool
off the pen.
Ready to Learn More?
Note: The pen turns off automatically after about 20
minutes of inactivity. Slide the switch to turn the pen
back on.
• Sign up for complimentary webinars
• Watch helpful how-to videos
EPSON and BrightLink are registered trademarks and EPSON Exceed Your Vision
is a registered logomark of Seiko Epson Corporation.
General Notice: Other product names used herein are for identification purposes
only and may be trademarks of their respective owners. Epson disclaims any and
all rights in those marks.
This information is subject to change without notice.
© 2012 Epson America, Inc. 11/12
Printed in USA
CPD-38383
• Find out about cool, free interactive sites
Click the BrightLink Training Resources
link on your desktop or go to
www.epson.com/eduresources.
5
Use PC Free Annotation
toolbar that is built into the projector
(PC Free Annotation). This lets you
annotate images from a document
camera, tablet, DVD player, or other
source connected to your projector.
Students and colleagues can connect
their own laptops and annotate on the
fly using the built-in toolbar, without
installing software.
Get a DVD containing BrightLink
training videos!
Just click the BrightLink Training
Resources link on your desktop or go
to www.epson.com/eduresources
and request a DVD.
Download PDF

advertising