Epson | 436Wi | Welcome Kit | Epson 436Wi Welcome Kit

Getting up and running with
BrightLink is easy!
Learning BrightLink basics takes less than 30 minutes. The resources in this kit will help you
take your first steps toward a more interactive classroom.
The BrightLink online support center provides lots of additional resources. Click the
BrightLink Training Resources link on your desktop or go to epson.com/brightlink
(U.S.) or epson.ca/brightlink (Canada). Training options include:
ree webinars will help you use BrightLink’s interactivity to engage students and
• F
enhance your instruction.
hort tutorials can help you master a new tool or application of your BrightLink in mere
• S
minutes. Watch, listen, and follow along.
nsite professional development provides more specific and personalized training for
• O
your school.
With the help of these tools and resources, you can start using your BrightLink in powerful
ways from the very first day you turn it on!
BrightLink Welcome Kit
www.epson.com/brightlink
Pre-sales support U.S. and Canada (800) 453-7766
Epson America, Inc.
3840 Kilroy Airport Way
Long Beach, CA 90806
Epson Canada, Ltd.
185 Renfrew Drive
Markham, Ontario L3R 6G3
www.epson.com
www.epson.ca
EPSON and BrightLink are registered trademarks and EPSON Exceed Your Vision is a registered logomark of Seiko Epson
Corporation. PrivateLine is a registered trademark of Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective
owners. Epson disclaims any and all rights in those marks.
© 2012 Epson America, Inc. 11/12
CPD-38382
Days and hours of support are subject to change without notice. Toll or long distance
charges may apply.
Support hours are 6 am to 8 pm, Pacific Time, Monday through Friday and 7 am to 4 pm,
Pacific Time, Saturday.
You may also speak with a projector support specialist by dialing (562) 276-4394 (U.S.) or
(905) 709-3839 (Canada).
The PrivateLine® service is for you! All you have to do is call (800) 637-7661. This service is
available for the duration of your warranty period.
Still need help?
You can download EPSON iProjection for free from the App Store. For more information,
visit: www.epson.com/projectorapp (U.S.) or www.epson.ca/projectorapp (Canada).
The EPSON iProjection app lets you show documents and photos wirelessly from Apple®
devices on your BrightLink! If the projector is on a network that includes a wireless access
point (or you have the optional wireless module), the app will work for you.
EPSON iProjection for iPad,
iPhone, and iPod touch
Welcome to BrightLink!
This kit has everything you need to get started with BrightLink. Here’s how:
1
First,
2
Install
3
Then
4
Play
follow the steps on the Start Here card to
get up and running.
the manual links from the
BrightLink 436Wi CD in this kit.
click the BrightLink Training Resources
link on your desktop and sign up for free
webinars and training.
BrightLink Training Resources
with the software. Tip sheets for
TeamBoard Draw and Easy Interactive Tools are
right in this kit.
For help, software, manuals, FAQs, and more, go to epson.com/brightlinkdownloads (U.S.)
or epson.ca/brightlinkdownloads (Canada).
Getting up and running with
BrightLink is easy!
Learning BrightLink basics takes less than 30 minutes. The resources in this kit will help you
take your first steps toward a more interactive classroom.
The BrightLink online support center provides lots of additional resources. Click the
BrightLink Training Resources link on your desktop or go to epson.com/brightlink
(U.S.) or epson.ca/brightlink (Canada). Training options include:
ree webinars will help you use BrightLink’s interactivity to engage students and
• F
enhance your instruction.
hort tutorials can help you master a new tool or application of your BrightLink in mere
• S
minutes. Watch, listen, and follow along.
nsite professional development provides more specific and personalized training for
• O
your school.
With the help of these tools and resources, you can start using your BrightLink in powerful
ways from the very first day you turn it on!
BrightLink Welcome Kit
www.epson.com/brightlink
Pre-sales support U.S. and Canada (800) 453-7766
Epson America, Inc.
3840 Kilroy Airport Way
Long Beach, CA 90806
Epson Canada, Ltd.
185 Renfrew Drive
Markham, Ontario L3R 6G3
www.epson.com
www.epson.ca
EPSON and BrightLink are registered trademarks and EPSON Exceed Your Vision is a registered logomark of Seiko Epson
Corporation. PrivateLine is a registered trademark of Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective
owners. Epson disclaims any and all rights in those marks.
© 2012 Epson America, Inc. 11/12
CPD-38382
Days and hours of support are subject to change without notice. Toll or long distance
charges may apply.
Support hours are 6 am to 8 pm, Pacific Time, Monday through Friday and 7 am to 4 pm,
Pacific Time, Saturday.
You may also speak with a projector support specialist by dialing (562) 276-4394 (U.S.) or
(905) 709-3839 (Canada).
The PrivateLine® service is for you! All you have to do is call (800) 637-7661. This service is
available for the duration of your warranty period.
Still need help?
You can download EPSON iProjection for free from the App Store. For more information,
visit: www.epson.com/projectorapp (U.S.) or www.epson.ca/projectorapp (Canada).
The EPSON iProjection app lets you show documents and photos wirelessly from Apple®
devices on your BrightLink! If the projector is on a network that includes a wireless access
point (or you have the optional wireless module), the app will work for you.
EPSON iProjection for iPad,
iPhone, and iPod touch
Getting up and running with
BrightLink is easy!
Learning BrightLink basics takes less than 30 minutes. The resources in this kit will help you
take your first steps toward a more interactive classroom.
The BrightLink online support center provides lots of additional resources. Click the
BrightLink Training Resources link on your desktop or go to epson.com/brightlink
(U.S.) or epson.ca/brightlink (Canada). Training options include:
ree webinars will help you use BrightLink’s interactivity to engage students and
• F
enhance your instruction.
hort tutorials can help you master a new tool or application of your BrightLink in mere
• S
minutes. Watch, listen, and follow along.
• Onsite professional development provides more specific and personalized training for
your school.
With the help of these tools and resources, you can start using your BrightLink in powerful
ways from the very first day you turn it on!
BrightLink Welcome Kit
www.epson.com/brightlink
Pre-sales support U.S. and Canada (800) 453-7766
Epson America, Inc.
3840 Kilroy Airport Way
Long Beach, CA 90806
Epson Canada, Ltd.
185 Renfrew Drive
Markham, Ontario L3R 6G3
www.epson.com
www.epson.ca
EPSON and BrightLink are registered trademarks and EPSON Exceed Your Vision is a registered logomark of Seiko Epson
Corporation. PrivateLine is a registered trademark of Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective
owners. Epson disclaims any and all rights in those marks.
© 2012 Epson America, Inc. 11/12
CPD-38382
Days and hours of support are subject to change without notice. Toll or long distance
charges may apply.
Support hours are 6 am to 8 pm, Pacific Time, Monday through Friday and 7 am to 4 pm,
Pacific Time, Saturday.
You may also speak with a projector support specialist by dialing (562) 276-4394 (U.S.) or
(905) 709-3839 (Canada).
The PrivateLine® service is for you! All you have to do is call (800) 637-7661. This service is
available for the duration of your warranty period.
Still need help?
You can download EPSON iProjection for free from the App Store. For more information,
visit: www.epson.com/projectorapp (U.S.) or www.epson.ca/projectorapp (Canada).
The EPSON iProjection app lets you show documents and photos wirelessly from Apple®
devices on your BrightLink! If the projector is on a network that includes a wireless access
point (or you have the optional wireless module), the app will work for you.
EPSON iProjection for iPad,
iPhone, and iPod touch
Getting up and running with
BrightLink is easy!
Learning BrightLink basics takes less than 30 minutes. The resources in this kit will help you
take your first steps toward a more interactive classroom.
The BrightLink online support center provides lots of additional resources. Click the
BrightLink Training Resources link on your desktop or go to epson.com/brightlink
(U.S.) or epson.ca/brightlink (Canada). Training options include:
ree webinars will help you use BrightLink’s interactivity to engage students and
• F
enhance your instruction.
hort tutorials can help you master a new tool or application of your BrightLink in mere
• S
minutes. Watch, listen, and follow along.
• Epson America, Inc.
3840 Kilroy Airport Way
Long Beach, CA 90806
Epson Canada, Ltd.
185 Renfrew Drive
Markham, Ontario L3R 6G3
www.epson.com
www.epson.ca
EPSON and BrightLink are registered trademarks and EPSON Exceed Your Vision is a registered logomark of Seiko Epson
Corporation. PrivateLine is a registered trademark of Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective
owners. Epson disclaims any and all rights in those marks.
© 2012 Epson America, Inc. 11/12
CPD-38382
4 UsetheInteractivePen
Your projector came with one pen (Interactive Pen A)
with an orange-colored end. If you want to use dual pen
interactivity and annotation, you will need to purchase
the optional Interactive Pen B with a blue-colored end
(part number V12H523001).
Battery light
Power switch
5 UsePCFreeAnnotation
ChoosingtheRightTool
If you already have annotation software, you can use
it with BrightLink. If you are using Microsoft® Office
2003 or later, you can also use the “inking tools” to add
handwritten notes to your documents and PowerPoint®
presentations.
The projector’s built-in toolbar lets you annotate images
from other devices that have been connected to the
projector, such as a document camera, tablet, or other
source.
1
Here are some tips on choosing among the tools that
came with your BrightLink projector:
light comes on briefly. If the battery is low, the light
flashes.
• Hold the pen perpendicular to the board, as shown
TeamBoard Draw
• To turn on the pen, slide the power switch. The green
Easy Interactive Tools
Built-In Toolbar
Press one of the Source buttons on the remote
control to select the source for the image you want
to annotate.
Image from a
computer connected
to the Computer1
or Computer2 port
Image from a computer with
an HDMI connection, or a
video player
2
below.
Image from an
external device
connected to the
USB port
Image from a computer or
iPad connected through a
wired or wireless network
To activate the toolbar, tap the board with the pen.
If you don’t see the
icon, tap the
icon and
then tap the
icon.
Note: If you see either icon, you are already in PC
Free Annotation mode.
Annotate on computer display
•
•
•
Annotate on white
background
•
•
•
Annotate on images from
document cameras or other
sources
•
3
• To left-click, tap on the board.
Use two pens simultaneously
•
Note: Many of the built-in tools are the same as Easy
Interactive Tools, but fewer functions are available.
• To double-click, tap twice.
Save annotations
• To right-click, press the board with the pen for about
Record lessons and import/
export files
3 seconds.
•
•
To close the toolbar, select the
bottom of the toolbar.
icon at the
•
BrightLinkInteraction
Two different toolbars are available in PC Free Annotation
mode, one for annotation mode and one for whiteboard
annotation mode.
The BrightLink interactive pen turns any wall or table into
an interactive area, either with or without a computer.
• Annotation mode displays the built-in toolbar on
• With a computer, you can use Easy
whatever image is being projected.
Interactive Tools (dual pens). This
software lets you use the interactive pen
as a mouse to annotate, save, and interact
with content from your computer.
• Whiteboard annotation mode lets you project a white
or black screen or background pattern, and use the
pen to write or draw as you would on a chalkboard or
dry erase board.
Select annotation
mode
Undo
Stop or resume action
in a video*
Select whiteboard
annotation mode
Redo
Zoom into image
Recalibrate
Change custom pen
color and width
Change highlighter
color
Use black, red, or
blue pen—select
small dot for thin line
Erase—select small
dot for thin eraser
Hide toolbar after
each annotation
Use custom pen
Use highlighter
Use black, red, or blue
pen—select large dot
for thick line
Erase—select large dot
for thick eraser
Clear all annotations
Close toolbar
* In annotation mode, the
select background tool appears instead of
this one. It lets you select the background color or pattern.
•
• To click and drag, tap and drag with the pen.
• Without a computer, you can use the
StartHere
Follow the steps on this card to get started with your
BrightLink:
1
Connect your computer and turn on the projector
2
Make sure the software is installed
3
Calibrate
• Using the remote control
• To move the cursor, hover over the board without
touching it.
4
• When you are finished, slide the power switch to turn
Use the interactive pen
• Choosing the right tool
off the pen.
Ready to Learn More?
Note: The pen turns off automatically after about 20
minutes of inactivity. Slide the switch to turn the pen
back on.
• Sign up for complimentary webinars
• Watch helpful how-to videos
EPSON and BrightLink are registered trademarks and EPSON Exceed Your Vision
is a registered logomark of Seiko Epson Corporation.
General Notice: Other product names used herein are for identification purposes
only and may be trademarks of their respective owners. Epson disclaims any and
all rights in those marks.
This information is subject to change without notice.
© 2012 Epson America, Inc. 11/12
Printed in USA
CPD-38383
• Find out about cool, free interactive sites
Click the BrightLink Training Resources
link on your desktop or go to
www.epson.com/eduresources.
5
Use PC Free Annotation
toolbar that is built into the projector
(PC Free Annotation). This lets you
annotate images from a document
camera, tablet, DVD player, or other
source connected to your projector.
Students and colleagues can connect
their own laptops and annotate on the
fly using the built-in toolbar, without
installing software.
Get a DVD containing BrightLink
training videos!
Just click the BrightLink Training
Resources link on your desktop or go
to www.epson.com/eduresources
and request a DVD.
2 Make Sure the Software Is Installed
1 Connect Your Computer and
Turn on the Projector
1
onnect the USB cable from the projector’s USB
C
TypeB port directly to any available USB port on
your computer.
4
doesn’t appear, try one of the following:
• On some Windows laptops, you may need to
Display an image from your computer. If the image
hold down the Fn key on the keyboard and press
F7 or the function key that lets you display on
an external monitor. It may have an icon such as
, or it may be labelled CRT/LCD.
• On a Mac, you may need to open System
Preferences and select Displays. Select the
VGA Display or Color LCD option if necessary,
then click the Arrange or Arrangement tab,
and select the Mirror Displays check box.
Here’s how to find out if the software is installed on your
computer:
If you need to install the software
Do one of the following:
• Use the CD that came with the projector, labeled
“EPSON Projector Software for Easy Interactive
Function”
If you are using a Mac:
Look for the Easy Interactive Driver and Easy Interactive
Tools folders in the Application folder on your hard drive.
If you see these folders, the software is installed.
1
2
• Try pressing the Source Search button on the
• Download the most up-to-date version from:
epson.com/brightlinkdownloads (U.S.)
epson.ca/brightlinkdownloads (Canada)
Connect an HDMI or VGA cable from the projector
to your computer.
HDMI
or more information about Easy Interactive Tools, see
F
the Easy Interactive Tool Tips sheet in this Welcome Kit
or the BrightLink User’s Guide.
VGA
You can also install TeamBoard Draw, an intermediate
level annotation program, from the CD that came with the
projector.
3
urn on the projector by pressing the red
T
button on the remote control.
In Windows®, you may see messages about device
drivers or new hardware.
power
Calibration coordinates the position of the pen with the
location of your cursor. If the pen position and cursor
location don’t match, you can try auto calibration, or you
can calibrate manually for even greater accuracy. You
don’t need a computer, and you won’t need to calibrate
again unless the projector or image is moved, or the
image is resized.
If you are using Windows:
Select
or Start > All Programs or Programs >
EPSON Projector > Easy Interactive Tools Ver.2.x.x.
If you see Easy Interactive Tools Ver. 2.x.x, the software
is installed.
Using the Remote
Control
Turn projector
on/off
Select from various
image sources
connected to the
projector
o start calibration, press the User button on the
T
remote control.
When you see the Auto Calibration screen, do one
remote control.
USB cable
2
You may already have the software on your computer,
or you may need to install it yourself. For Mac OS X, you
need Easy Interactive Driver and Easy Interactive Tools.
For Windows, you only need Easy Interactive Tools.
3 Calibrate
of the following:
• Press Enter to try auto calibration, then wait until
calibration is complete.
• Select No, then press Enter and follow the steps
below to calibrate manually.
you see this screen, select Manual
3When
Calibration, then press Enter.
Access menu
system for
additional
adjustments
Switch between
computer and Easy
Interactive Pen
Enter
Calibrate
Zoom in and out
Page through
documents
Temporarily
turn off image
Stop video action
For more information on using the remote control and
cool time-saving buttons:
• See the on-screen BrightLink User’s Guide.
• Go to the training section and watch a video or two at
4
Yes.
5
ouch the circles on the screen to perform manual
T
calibration.
When you see this screen, press Enter to select
For more information, see the TeamBoard Draw Tips
sheet in this Welcome Kit or the TeamBoard videos at
epson.com/brightlink (U.S.) or epson.ca/brightlink
(Canada).
If the software is not installed, follow the steps in the next
column to install it.
For more detailed instructions, see the on-screen
BrightLink User’s Guide.
epson.com/brightlinkvideos (U.S.) or
epson.ca/brightlinkvideos (Canada).
2 Make Sure the Software Is Installed
1 Connect Your Computer and
Turn on the Projector
1
onnect the USB cable from the projector’s USB
C
TypeB port directly to any available USB port on
your computer.
4
doesn’t appear, try one of the following:
• On some Windows laptops, you may need to
Display an image from your computer. If the image
hold down the Fn key on the keyboard and press
F7 or the function key that lets you display on
an external monitor. It may have an icon such as
, or it may be labelled CRT/LCD.
• On a Mac, you may need to open System
Preferences and select Displays. Select the
VGA Display or Color LCD option if necessary,
then click the Arrange or Arrangement tab,
and select the Mirror Displays check box.
Here’s how to find out if the software is installed on your
computer:
If you need to install the software
Do one of the following:
• Use the CD that came with the projector, labeled
“EPSON Projector Software for Easy Interactive
Function”
If you are using a Mac:
Look for the Easy Interactive Driver and Easy Interactive
Tools folders in the Application folder on your hard drive.
If you see these folders, the software is installed.
1
2
• Try pressing the Source Search button on the
• Download the most up-to-date version from:
epson.com/brightlinkdownloads (U.S.)
epson.ca/brightlinkdownloads (Canada)
Connect an HDMI or VGA cable from the projector
to your computer.
HDMI
or more information about Easy Interactive Tools, see
F
the Easy Interactive Tool Tips sheet in this Welcome Kit
or the BrightLink User’s Guide.
VGA
You can also install TeamBoard Draw, an intermediate
level annotation program, from the CD that came with the
projector.
3
urn on the projector by pressing the red
T
button on the remote control.
In Windows®, you may see messages about device
drivers or new hardware.
power
Calibration coordinates the position of the pen with the
location of your cursor. If the pen position and cursor
location don’t match, you can try auto calibration, or you
can calibrate manually for even greater accuracy. You
don’t need a computer, and you won’t need to calibrate
again unless the projector or image is moved, or the
image is resized.
If you are using Windows:
Select
or Start > All Programs or Programs >
EPSON Projector > Easy Interactive Tools Ver.2.x.x.
If you see Easy Interactive Tools Ver. 2.x.x, the software
is installed.
Using the Remote
Control
Turn projector
on/off
Select from various
image sources
connected to the
projector
o start calibration, press the User button on the
T
remote control.
When you see the Auto Calibration screen, do one
remote control.
USB cable
2
You may already have the software on your computer,
or you may need to install it yourself. For Mac OS X, you
need Easy Interactive Driver and Easy Interactive Tools.
For Windows, you only need Easy Interactive Tools.
3 Calibrate
of the following:
• Press Enter to try auto calibration, then wait until
calibration is complete.
• Select No, then press Enter and follow the steps
below to calibrate manually.
you see this screen, select Manual
3When
Calibration, then press Enter.
Access menu
system for
additional
adjustments
Switch between
computer and Easy
Interactive Pen
Enter
Calibrate
Zoom in and out
Page through
documents
Temporarily
turn off image
Stop video action
For more information on using the remote control and
cool time-saving buttons:
• See the on-screen BrightLink User’s Guide.
• Go to the training section and watch a video or two at
4
Yes.
5
ouch the circles on the screen to perform manual
T
calibration.
When you see this screen, press Enter to select
For more information, see the TeamBoard Draw Tips
sheet in this Welcome Kit or the TeamBoard videos at
epson.com/brightlink (U.S.) or epson.ca/brightlink
(Canada).
If the software is not installed, follow the steps in the next
column to install it.
For more detailed instructions, see the on-screen
BrightLink User’s Guide.
epson.com/brightlinkvideos (U.S.) or
epson.ca/brightlinkvideos (Canada).
2 Make Sure the Software Is Installed
1 Connect Your Computer and
Turn on the Projector
1
onnect the USB cable from the projector’s USB
C
TypeB port directly to any available USB port on
your computer.
4
doesn’t appear, try one of the following:
• On some Windows laptops, you may need to
Display an image from your computer. If the image
hold down the Fn key on the keyboard and press
F7 or the function key that lets you display on
an external monitor. It may have an icon such as
, or it may be labelled CRT/LCD.
• On a Mac, you may need to open System
Preferences and select Displays. Select the
VGA Display or Color LCD option if necessary,
then click the Arrange or Arrangement tab,
and select the Mirror Displays check box.
Here’s how to find out if the software is installed on your
computer:
If you need to install the software
Do one of the following:
• Use the CD that came with the projector, labeled
“EPSON Projector Software for Easy Interactive
Function”
If you are using a Mac:
Look for the Easy Interactive Driver and Easy Interactive
Tools folders in the Application folder on your hard drive.
If you see these folders, the software is installed.
1
2
• Try pressing the Source Search button on the
• Download the most up-to-date version from:
epson.com/brightlinkdownloads (U.S.)
epson.ca/brightlinkdownloads (Canada)
Connect an HDMI or VGA cable from the projector
to your computer.
HDMI
or more information about Easy Interactive Tools, see
F
the Easy Interactive Tool Tips sheet in this Welcome Kit
or the BrightLink User’s Guide.
VGA
You can also install TeamBoard Draw, an intermediate
level annotation program, from the CD that came with the
projector.
3
urn on the projector by pressing the red
T
button on the remote control.
In Windows®, you may see messages about device
drivers or new hardware.
power
Calibration coordinates the position of the pen with the
location of your cursor. If the pen position and cursor
location don’t match, you can try auto calibration, or you
can calibrate manually for even greater accuracy. You
don’t need a computer, and you won’t need to calibrate
again unless the projector or image is moved, or the
image is resized.
If you are using Windows:
Select
or Start > All Programs or Programs >
EPSON Projector > Easy Interactive Tools Ver.2.x.x.
If you see Easy Interactive Tools Ver. 2.x.x, the software
is installed.
Using the Remote
Control
Turn projector
on/off
Select from various
image sources
connected to the
projector
o start calibration, press the User button on the
T
remote control.
When you see the Auto Calibration screen, do one
remote control.
USB cable
2
You may already have the software on your computer,
or you may need to install it yourself. For Mac OS X, you
need Easy Interactive Driver and Easy Interactive Tools.
For Windows, you only need Easy Interactive Tools.
3 Calibrate
of the following:
• Press Enter to try auto calibration, then wait until
calibration is complete.
• Select No, then press Enter and follow the steps
below to calibrate manually.
you see this screen, select Manual
3When
Calibration, then press Enter.
Access menu
system for
additional
adjustments
Switch between
computer and Easy
Interactive Pen
Enter
Calibrate
Zoom in and out
Page through
documents
Temporarily
turn off image
Stop video action
For more information on using the remote control and
cool time-saving buttons:
• See the on-screen BrightLink User’s Guide.
• Go to the training section and watch a video or two at
4
Yes.
5
ouch the circles on the screen to perform manual
T
calibration.
When you see this screen, press Enter to select
For more information, see the TeamBoard Draw Tips
sheet in this Welcome Kit or the TeamBoard videos at
epson.com/brightlink (U.S.) or epson.ca/brightlink
(Canada).
If the software is not installed, follow the steps in the next
column to install it.
For more detailed instructions, see the on-screen
BrightLink User’s Guide.
epson.com/brightlinkvideos (U.S.) or
epson.ca/brightlinkvideos (Canada).
4 UsetheInteractivePen
Your projector came with one pen (Interactive Pen A)
with an orange-colored end. If you want to use dual pen
interactivity and annotation, you will need to purchase
the optional Interactive Pen B with a blue-colored end
(part number V12H523001).
Battery light
Power switch
5 UsePCFreeAnnotation
ChoosingtheRightTool
If you already have annotation software, you can use
it with BrightLink. If you are using Microsoft® Office
2003 or later, you can also use the “inking tools” to add
handwritten notes to your documents and PowerPoint®
presentations.
The projector’s built-in toolbar lets you annotate images
from other devices that have been connected to the
projector, such as a document camera, tablet, or other
source.
1
Here are some tips on choosing among the tools that
came with your BrightLink projector:
light comes on briefly. If the battery is low, the light
flashes.
• Hold the pen perpendicular to the board, as shown
TeamBoard Draw
• To turn on the pen, slide the power switch. The green
Easy Interactive Tools
Built-In Toolbar
Press one of the Source buttons on the remote
control to select the source for the image you want
to annotate.
Image from a
computer connected
to the Computer1
or Computer2 port
Image from a computer with
an HDMI connection, or a
video player
2
below.
Image from an
external device
connected to the
USB port
Image from a computer or
iPad connected through a
wired or wireless network
To activate the toolbar, tap the board with the pen.
If you don’t see the
icon, tap the
icon and
then tap the
icon.
Note: If you see either icon, you are already in PC
Free Annotation mode.
Annotate on computer display
•
•
•
Annotate on white
background
•
•
•
Annotate on images from
document cameras or other
sources
•
3
• To left-click, tap on the board.
Use two pens simultaneously
•
Note: Many of the built-in tools are the same as Easy
Interactive Tools, but fewer functions are available.
• To double-click, tap twice.
Save annotations
• To right-click, press the board with the pen for about
Record lessons and import/
export files
3 seconds.
•
•
To close the toolbar, select the
bottom of the toolbar.
icon at the
•
BrightLinkInteraction
Two different toolbars are available in PC Free Annotation
mode, one for annotation mode and one for whiteboard
annotation mode.
The BrightLink interactive pen turns any wall or table into
an interactive area, either with or without a computer.
• Annotation mode displays the built-in toolbar on
• With a computer, you can use Easy
whatever image is being projected.
Interactive Tools (dual pens). This
software lets you use the interactive pen
as a mouse to annotate, save, and interact
with content from your computer.
• Whiteboard annotation mode lets you project a white
or black screen or background pattern, and use the
pen to write or draw as you would on a chalkboard or
dry erase board.
Select annotation
mode
Undo
Stop or resume action
in a video*
Select whiteboard
annotation mode
Redo
Zoom into image
Recalibrate
Change custom pen
color and width
Change highlighter
color
Use black, red, or
blue pen—select
small dot for thin line
Erase—select small
dot for thin eraser
Hide toolbar after
each annotation
Use custom pen
Use highlighter
Use black, red, or blue
pen—select large dot
for thick line
Erase—select large dot
for thick eraser
Clear all annotations
Close toolbar
* In annotation mode, the
select background tool appears instead of
this one. It lets you select the background color or pattern.
•
• To click and drag, tap and drag with the pen.
• Without a computer, you can use the
StartHere
Follow the steps on this card to get started with your
BrightLink:
1
Connect your computer and turn on the projector
2
Make sure the software is installed
3
Calibrate
• Using the remote control
• To move the cursor, hover over the board without
touching it.
4
• When you are finished, slide the power switch to turn
Use the interactive pen
• Choosing the right tool
off the pen.
Ready to Learn More?
Note: The pen turns off automatically after about 20
minutes of inactivity. Slide the switch to turn the pen
back on.
• Sign up for complimentary webinars
• Watch helpful how-to videos
EPSON and BrightLink are registered trademarks and EPSON Exceed Your Vision
is a registered logomark of Seiko Epson Corporation.
General Notice: Other product names used herein are for identification purposes
only and may be trademarks of their respective owners. Epson disclaims any and
all rights in those marks.
This information is subject to change without notice.
© 2012 Epson America, Inc. 11/12
Printed in USA
CPD-38383
• Find out about cool, free interactive sites
Click the BrightLink Training Resources
link on your desktop or go to
www.epson.com/eduresources.
5
Use PC Free Annotation
toolbar that is built into the projector
(PC Free Annotation). This lets you
annotate images from a document
camera, tablet, DVD player, or other
source connected to your projector.
Students and colleagues can connect
their own laptops and annotate on the
fly using the built-in toolbar, without
installing software.
Get a DVD containing BrightLink
training videos!
Just click the BrightLink Training
Resources link on your desktop or go
to www.epson.com/eduresources
and request a DVD.
4 UsetheInteractivePen
Your projector came with one pen (Interactive Pen A)
with an orange-colored end. If you want to use dual pen
interactivity and annotation, you will need to purchase
the optional Interactive Pen B with a blue-colored end
(part number V12H523001).
Battery light
Power switch
5 UsePCFreeAnnotation
ChoosingtheRightTool
If you already have annotation software, you can use
it with BrightLink. If you are using Microsoft® Office
2003 or later, you can also use the “inking tools” to add
handwritten notes to your documents and PowerPoint®
presentations.
The projector’s built-in toolbar lets you annotate images
from other devices that have been connected to the
projector, such as a document camera, tablet, or other
source.
1
Here are some tips on choosing among the tools that
came with your BrightLink projector:
light comes on briefly. If the battery is low, the light
flashes.
• Hold the pen perpendicular to the board, as shown
TeamBoard Draw
• To turn on the pen, slide the power switch. The green
Easy Interactive Tools
Built-In Toolbar
Press one of the Source buttons on the remote
control to select the source for the image you want
to annotate.
Image from a
computer connected
to the Computer1
or Computer2 port
Image from a computer with
an HDMI connection, or a
video player
2
below.
Image from an
external device
connected to the
USB port
Image from a computer or
iPad connected through a
wired or wireless network
To activate the toolbar, tap the board with the pen.
If you don’t see the
icon, tap the
icon and
then tap the
icon.
Note: If you see either icon, you are already in PC
Free Annotation mode.
Annotate on computer display
•
•
•
Annotate on white
background
•
•
•
Annotate on images from
document cameras or other
sources
•
3
• To left-click, tap on the board.
Use two pens simultaneously
•
Note: Many of the built-in tools are the same as Easy
Interactive Tools, but fewer functions are available.
• To double-click, tap twice.
Save annotations
• To right-click, press the board with the pen for about
Record lessons and import/
export files
3 seconds.
•
•
To close the toolbar, select the
bottom of the toolbar.
icon at the
•
BrightLinkInteraction
Two different toolbars are available in PC Free Annotation
mode, one for annotation mode and one for whiteboard
annotation mode.
The BrightLink interactive pen turns any wall or table into
an interactive area, either with or without a computer.
• Annotation mode displays the built-in toolbar on
• With a computer, you can use Easy
whatever image is being projected.
Interactive Tools (dual pens). This
software lets you use the interactive pen
as a mouse to annotate, save, and interact
with content from your computer.
• Whiteboard annotation mode lets you project a white
or black screen or background pattern, and use the
pen to write or draw as you would on a chalkboard or
dry erase board.
Select annotation
mode
Undo
Stop or resume action
in a video*
Select whiteboard
annotation mode
Redo
Zoom into image
Recalibrate
Change custom pen
color and width
Change highlighter
color
Use black, red, or
blue pen—select
small dot for thin line
Erase—select small
dot for thin eraser
Hide toolbar after
each annotation
Use custom pen
Use highlighter
Use black, red, or blue
pen—select large dot
for thick line
Erase—select large dot
for thick eraser
Clear all annotations
Close toolbar
* In annotation mode, the
select background tool appears instead of
this one. It lets you select the background color or pattern.
•
• To click and drag, tap and drag with the pen.
• Without a computer, you can use the
StartHere
Follow the steps on this card to get started with your
BrightLink:
1
Connect your computer and turn on the projector
2
Make sure the software is installed
3
Calibrate
• Using the remote control
• To move the cursor, hover over the board without
touching it.
4
• When you are finished, slide the power switch to turn
Use the interactive pen
• Choosing the right tool
off the pen.
Ready to Learn More?
Note: The pen turns off automatically after about 20
minutes of inactivity. Slide the switch to turn the pen
back on.
• Sign up for complimentary webinars
• Watch helpful how-to videos
EPSON and BrightLink are registered trademarks and EPSON Exceed Your Vision
is a registered logomark of Seiko Epson Corporation.
General Notice: Other product names used herein are for identification purposes
only and may be trademarks of their respective owners. Epson disclaims any and
all rights in those marks.
This information is subject to change without notice.
© 2012 Epson America, Inc. 11/12
Printed in USA
CPD-38383
• Find out about cool, free interactive sites
Click the BrightLink Training Resources
link on your desktop or go to
www.epson.com/eduresources.
5
Use PC Free Annotation
toolbar that is built into the projector
(PC Free Annotation). This lets you
annotate images from a document
camera, tablet, DVD player, or other
source connected to your projector.
Students and colleagues can connect
their own laptops and annotate on the
fly using the built-in toolbar, without
installing software.
Get a DVD containing BrightLink
training videos!
Just click the BrightLink Training
Resources link on your desktop or go
to www.epson.com/eduresources
and request a DVD.
Easy Interactive Tool Tips
1
To start Easy Interactive Tools on your computer, press the Pen Mode button on the remote control and make sure PC
Interactive is selected. Then, do one of the following:
• Windows® : Select
Ver.2.xx.
or Start > All Programs or Programs > EPSON Projector > Easy Interactive Tools
Easy Interactive Tools icon on your desktop.
Or, double-click the
• Mac OS X: Select Applications > Easy Interactive Tools > Easy Interactive Tools Ver.2.xx.
he Easy Interactive toolbar appears on the projected image, and an
T
arrow appears on the other side of the
image. Two different toolbars are available, one for interactive mode and one for whiteboard mode:
Interactive Mode
Whiteboard Mode
In interactive mode, the toolbar
appears on the projected
image and lets you use the
pen as a mouse to open
applications, access links,
and operate scroll bars, for
example.
In whiteboard mode, the toolbar
appears on a blank surface,
background image, or pattern.
You can write or draw with the
pen, add images, and save or
print your pages.
In this mode, you can also
annotate whatever is displayed
from your computer or
document camera and save or
print your pages.
Interactive
tools
Whiteboard
tools
Annotating
Annotation
tools
Annotation
tools
Interactive toolbar
You can use the annotation tools
at the bottom of the toolbar in
either mode.
Whiteboard toolbar
2
o toggle between modes, select the
T
Annotation mode icon to display the interactive toolbar, or the
Whiteboard mode icon to display the whiteboard toolbar.
3
o exit Easy Interactive Tools, select the
T
Exit icon in the lower right corner of the toolbar. You can also minimize the
toolbar by selecting the
Close icon, then select the
arrow to redisplay the toolbar.
Tools for Interactive Mode
Switch to interactive mode
Toggle between pen and mouse modes
Switch to whiteboard mode
Save the current screen
Undo/redo multiple operations (one at a time)
Page up/down in a browser or other program
Display the image from a document camera
connected to the computer via USB
Use the magnifier to enlarge the image
Display additional tools for saving, printing, and more
Use an on-screen keyboard to enter text in a browser or
other program
Display a cursor that lets you resize or move an inserted image
Insert a circle, square, triangle, or other shape
Tools for Annotation
Write or draw with custom pen
Change custom pen color and width
Write or draw with transparent highlighter pen
Change highlighter pen color and width
Use black, red, or blue pen—select large dot for thick lines
Use black, red, or blue pen—select small dot for thin lines
Erase—select small dot for thin eraser
Erase—select large dot for thick eraser
Clear all annotations
Toggle between hiding the toolbar after use and
showing it continuously
Exit Easy Interactive Tools
Hide/minimize the toolbar
Tools for Whiteboard Mode
Switch to interactive mode
Select from background patterns or colors, or display an
image from a document camera
Switch to whiteboard mode
Save the current screen
Undo/redo multiple operations (one at a time)
Display a list of pages currently being edited
Insert an image from a file or from a document camera
connected to the computer
Use the magnifier to enlarge the image
Display additional tools for saving, printing, and more
Open a new page
Delete the current page
Display a cursor that lets you resize or move an
inserted image
Insert a circle, square, triangle, or other shape
Tools for Saving, Printing, and More
To display the tools shown below, select the
Other tools icon on the toolbar.
Display a movable spotlight effect
Print the currently displayed image. In whiteboard mode, you can
select the pages to print.
Capture the screen and move it to the clipboard. The clipboard
holds only one image at a time.
Change the next pen tap to a right click (interactive mouse
mode only)
Cover the image with a movable shade
Open the settings screen, which lets you select settings for
saving your pages and more
Display help (interactive mouse mode only)
1
o save your screen or pages as .pdf files in your Documents > Easy
T
Interactive Tools folder, simply select the
Save tool. Easy Interactive
Tools names your file automatically based on the date and time.
2
o select other locations and formats for saving, select the
T
then select the Save settings tab, as shown on the right.
3
elect the location, file name, and file type for saving pages. You can save
S
all your pages as one PDF file.
4
If you want to select different settings each time you save, select the Check
when saving checkbox.
5
Select OK to close the Settings window.
© 2012 Epson America, Inc. 11/12 Printed in USA Settings tool,
Windows
CPD-38385
Download PDF

advertising