Water and Wastewater Analysis Catalog

Water and Wastewater Analysis Catalog
2015-2016
Water and Wastewater
Analysis Catalog
Introduction / Contents
Contents
Acidity (Volatile)��������������������������������������������������3
Alkalinity������������������������������������������������������������������3
Ammonia���������������������������������������������������������������� 4
Chloride������������������������������������������������������������������� 4
Chlorine���������������������������������������������������������������5-6
Chlorine Dioxide�������������������������������������������������� 6
Chromium��������������������������������������������������������������� 6
Conductivity����������������������������������������������������� 7-9
Copper��������������������������������������������������������������������� 9
Cyanide������������������������������������������������������������������ 10
Fluoride����������������������������������������������������������������� 10
Hardness�������������������������������������������������������������� 10
Iron���������������������������������������������������������������������������11
Manganese�����������������������������������������������������������11
Nitrate������������������������������������������������������������������� 12
Oxygen, Dissolved�������������������������������������12-14
COD (Chemical Oxygen Demand)�������15-20
pH��������������������������������������������������������������������� 21-24
Phenols�����������������������������������������������������������������24
Phosphate�����������������������������������������������������������24
Hanna Design and Manufacturing
Sulfate�������������������������������������������������������������������25
In a short time, Hanna has reached its target to produce all of its instrumentation
in-house. Since the introduction of its industrial science park located in Romania,
the facility is equipped to support all phases of production such as product research
and design, plastic injection molding, electronic assembly, glass blowing for electrodes,
standards production and final assembly of product. Hanna oversees all aspects
of its products from conception to the final quality check and packaging.
Zinc�������������������������������������������������������������������������25
Our Woonsocket and Smithfield, RI facilities house our primary research and development
centers and assemble select products such as titrators, ISEs, and HI921 autosampler.
Temperature�������������������������������������������������������26
Autosampler�������������������������������������������������������27
Titration��������������������������������������������������������28-29
Turbidity������������������������������������������������������� 30-33
Multiparameter�����������������������������������������34-43
Buffers and Standards���������������������������44-45
ISE Solutions, ISAs and Accessories������� 46
Hanna also produces the packaging for all product lines. Each package is carefully designed
for safety and practicality. The in-house control of all research, design and production steps
provides continual quality control at all phases to assure the highest level of quality.
pH and ORP Electrodes����������������������������������47
After continuous validation and testing, Hanna products undergo a final
quality check before they are packaged and released to consumers.
Magnetic Stirrers����������������������������������������������50
In-house production affords Hanna the freedom to efficiently bring new
and innovative products to market while continuously improving the quality
and features of existing products to meet the needs of customers.
Hanna Online������������������������������������������������������ 51
HANNA is the largest family-owned manufacturer
of analytical instrumentation in the world.
For over 35 years, HANNA has delivered fresh
and innovative products to its customers.
2
Silver/Sulfide������������������������������������������������������25
| Water and Wastewater Analysis Catalog
pH electrodes for edge®����������������������������� 48
pH electrodes for HI98190��������������������������49
Limited Warranty��������������������������������������������� 51
ISO 9001:2008 CERTIFIED
These instruments are manufactured in our
European state-of-the-art ISO 9001:2008
production facility and is CE compliant to
EN 61326-1 and EN 61010-1 standards.
Acidity (Volatile) / Alkalinity
Alkalinity & Volatile
Acidity
Anaerobic digestion is a common
two-stage treatment process for
breaking down wastewater sludge.
In the first stage, saprophytic
bacteria consume organic matter
present in the sludge and convert
it to volatile acids; in the second
stage, methane-forming bacteria
convert the volatile acids to carbon
dioxide and methane. In a healthy
digester, the volatile acids formed
by the saprophytic bacteria are
consumed as an energy source by
the methane producers at the rate
in which they are being formed.
The alkalinity of the sludge buffers
the pH from drastically changing
as volatile acids are produced.
In wastewater treatment plants
with high incoming BOD levels, the
production of volatile acids is faster
than the production of methane,
resulting in an accumulation of the
volatile acid intermediate. If the ratio
of volatile acidity to alkalinity is too
high, the volatile acids will cause
the pH of the sludge to become
strongly acidic. This will reduce the
efficiency or even kill the anaerobic
bacteria, resulting in a sour digester.
Volatile acidity and alkalinity
measurements can be
performed by titration (p.28).
HI84531
Titratable Alkalinity Titrator
and pH Meter
for Water Analysis
• Piston driven pump with dynamic dosing
·· For highly accurate, repeatable results
• CAL Check™
·· Alerts users to potential problems during
calibration such as contaminated buffers or
dirty/broken pH electrodes
• Log-on-demand
·· Log data up to 400 samples (200 for titration;
200 for pH/mV)
• Graphic mode/exportable data
·· Displays in-depth data on titration, which
can then be stored and exported to either
a USB drive or PC using the USB connection
• Automatic stirrer speed control
·· Maintains stirrer speed at approximately
600 rpm regardless of viscosity of solution
• GLP features
• Dedicated HELP key for content sensitive help
This mini titrator and pH meter is designed for low to high levels of alkalinity. It performs a potentiometric titration
with a pH electrode to determine total titratable alkalinity or strong alkalinity in water.
The CAL Check™ function not only ensures an accurate pH reading when the HI84531 is used as a pH meter but also
an accurate titration since the endpoint is determined by a set pH value.
Specifications
Titrator
HI3811
Alkalinity Test Kit
Alkalinity can be measured
as phenolphthalein alkalinity
and total alkalinity.
pH
Specifications
Method
titration
Range
0-100 mg/L (ppm)
0-300 mg/L (ppm)
Smallest
1 mg/L (ppm)
Increment 3 mg/L (ppm)
Chemical
Method
phenolphthalein/
bromphenol blue
# Tests
110 avg.
Order
Info
HI3811 test kit comes with
10 mL phenolphthalein
indicator, 10 mL bromophenol
blue indicator, 120 mL alkalinity
titrant, 10 mL calibrated vessel,
50 mL calibrated vessel, and
calibrated syringe with tip.
* 1 gpg = 17 ppm CaCO₃
mV
Temperature
Ordering
Info
Reagents and
Accessories
HI84531
Range (as CaCO₃)*
Low Range: 30.0 to 400.0 mg/L; 0.6 to 8.0 meq/L
High Range: 300 to 4000 mg/L; 6.0 to 80.0 meq/L
Resolution
Low Range: 0.1 mg/L (ppm); 0.1 meq/L
High Range: 1 mg/L (ppm); 1 meq/L
Accuracy (@25°C/77°F)
Low Range: ±1 mg/L or 3% of reading, whichever is greater
High Range: ±10 mg/L or 3% of reading, whichever is greater
Range
-2.0 to 16.0 pH / -2.00 to 16.00 pH
Resolution
0.1 pH / 0.01 pH
Accuracy (@25°C/77°F)
± 0.01 pH
Calibration
one, two or three-point calibration; four available buffers (4.01, 7.01, 8.30, 10.01)
Range
-2000.0 to 2000.0 mV
Resolution
0.1 mV
Accuracy (@25°C/77°F)
± 1.0 mV
Range
-20.0 to 120.0°C; -4.0 to 248.0°F; 253.2 to 393.2 K
Resolution
0.1°C; 0.1°F; 0.1 K
Accuracy
±0.4°C; ±0.8°F; ±0.4 K
HI84531 is supplied with HI1131B pH electrode, HI7662-T temperature probe, HI84531-70 reagent kit for water
analysis, 100 mL beakers (2), dosing pump valve, 5 mL syringe, 1 mL plastic pipette, tube set (aspiration tube with
titrant bottle cap and dispensing tube with tip), stir bar, power adapter, instruction manual and quality certificate.
HI84531-50
titrant solution for low range, 120 mL
HI740236
5 mL syringe for mini titrator
HI84531-51
titrant solution for high range, 120 mL
HI70500
tube set with cap for titrant bottle,
tip and valve
HI84531-55
pump calibration standard, 230 mL
HI920013
PC connection cable
3
Ammonia / Chloride
Ammonia
HI96700C • HI96715C
Ammonia Portable
Photometers
Ammonia - nitrogen, in the form
of NH₃ and NH₄+, is often present
in water as a component of the
nitrogen cycle. In the metabolism
of proteins and amino acids,
many heterotrophic bacteria,
actinomycetes, and fungi (occurring
in both soil and water) excrete
what for them is excess nitrogen:
ammonia. Generally, in unpolluted
waters, ammonia and ammonium
compounds occur in relatively small
quantities, on the order of 0.1 mg/L,
while higher levels usually indicate
organic pollution. Ammonia is also
recognized to be toxic to diatoms
in the 7.4 to 8.5 pH range at a level
of 1.1 mg/L and to fish in the same
pH range, at a level of 2.5 mg/L.
• CAL Check™
• BEPS (Battery Error
Prevention System)
• GLP Features
The HI96700C and HI96715C meters
measure the ammonia-nitrogen
(NH₃—N) content in water samples.
Specifications
HI96700C Ammonia LR
HI96715C Ammonia MR
Range
0.00 to 3.00 mg/L (ppm) (as NH₃—N)
0.00 to 9.99 mg/L (ppm) (as NH₃—N)
Resolution
0.01 mg/L
0.01 mg/L
Accuracy
@ 25°C (77°F)
±0.04 mg/L ±4% of reading
±0.05 mg/L ±5% of reading
Reagents sold separately
HI96700-11
Reagents and
Standards
HI96715
HI4101
HI93700-01
reagents for 100 tests (N-NH3 LR)
HI93700-03
reagents for 300 tests (N-NH3 LR)
HI96715-11
CAL Check™ standard cuvettes
HI93715-01
reagents for 100 tests (N-NH3 MR)
HI93715-03
reagents for 300 tests (N-NH3 MR)
HI3815
Ammonia
Ion Selective
Electrode
Chloride Test
Kit
For use with
compatible ISE
meters
Chloride
Ion Selective
Electrode
Chloride
For use with
compatible ISE
meters
012 mm
012 mm
Specifications
Specifications
Method
titration
Range
0-100 mg/L (ppm)
0-1000 mg/L (ppm)
Measurement
Range
1M to 5•10-⁵M
35000 to 1.8 mg/L
(ppm)
Smallest
Increment
1 mg/L (ppm)
10 mg/L (ppm)
Optimum pH Range
2 to 11
mercuric nitrate
Temperature Range
0 to 80°C
-56
Chemical
Method
Approximate Slope
-56
12 mm
# Tests
110 avg.
Body O.D.
12 mm
Insertion Length
120 mm
Ordering
Info
HI3815 test kit comes with
15 mL diphenylcarbazone
indicator, 30 mL nitric acid
solution, 120 mL mercuric nitrate
solution, 50 mL calibrated
vessel, 10 mL calibrated vessel,
calibrated syringe with tip.
Body Material
PEI
Ordering
Info
HI4107 solid-state;
combination ISE with
1m coaxial cable and
BNC connection
Measurement
Range
1M to 1•10-⁶M
17000 to 0.02 mg/L
(ppm) 14000 to
0.016 mg/L as N
Optimum pH Range
>11
Temperature Range
0 to 40°C
Approximate Slope
Body O.D.
Insertion Length
120 mm
Body Material
Delrin®
Ordering
Info
HI4101 gas-sensing;
combination ISE with
1m coaxial cable and
BNC connection
4
Ammonia is commercially used as
a fertilizer, either as such or in the
form of compounds. Its presence
in raw surface waters indicates
animal or plant microbiological
decay, and it is toxic to fish
above certain critical levels.
HI4107
ISE
120 mm
ISE
CAL Check™ standard cuvettes
120 mm
HI96700
Specifications
In nature, the ammonia level in
water can vary. Ground water
normally contains ammonia due
to bacterial decay of plants and
animals. However, the presence of
ammonia in surface water may be
evidence of sanitary pollution due to
waste discharges or natural causes.
HI96700C and HI96715C is supplied with CAL Check™ standards, sample cuvettes (2) with caps,
9V battery, cuvette wiping cloth, instrument quality certificate, instruction manual and rigid carrying case.
Ordering
Info
| Water and Wastewater Analysis Catalog
Chloride ions are one of the
major inorganic anions in
water and wastewater.
A normal adult human body contains
approximately 81.7 g chloride. On
the basis of a total obligatory loss
of chloride of approximately 530
mg/day, a dietary intake of 9 mg
of chloride per kg of body weight
for adults has been recommended
(equivalent to slightly more than 1
g of table salt per person per day).
Chloride toxicity has not been
observed in humans except in
the special case of impaired
sodium chloride metabolism,
e.g. in congestive heart failure.
Healthy individuals can tolerate
the intake of large quantities of
chloride provided that there is an
accompanying intake of fresh water.
Chlorine
Chloride concentrations in excess
of about 250 mg/L can be detected
by taste in water, but the threshold
depends upon the associated cations.
Consumers can, however, become
accustomed to concentrations in
excess of 250 mg/L.
Chloride increases the electrical
conductivity of water and thus
increases its corrosivity. In metal
pipes, chloride reacts with metal ions
to form soluble salts, thus increasing
levels of metals in drinking-water. In
lead pipes, a protective oxide layer
is built up, but chloride enhances
galvanic corrosion. It can also
increase the rate of pitting corrosion
of metal pipes.
Chlorine
HI96711C
HI38017
• CAL Check™
Low and Medium Range
with Checker® Disc
Chlorine, Free and Total
Portable Photometer
• BEPS (Battery Error
Prevention System)
• GLP Features
The HI96711C measures the
free and total chlorine (Cl₂)
content in water and wastewater.
Specifications
HI96711C Free and Total Chlorine
Range
Chlorine, Free (P1): 0.00 to 5.00 mg/L (ppm);
Chlorine, Total (P2): 0.00 to 5.00 mg/L (ppm)
Resolution
0.01 mg/L from 0.00 to 3.50 mg/L (ppm);
0.10 mg/L above 3.50 mg/L (ppm)
Accuracy @ 25°C (77°F)
±0.03 mg/L ±3% of reading
Free Chlorine
Free chlorine reacts with ammonium
ions and organic compounds to form
chlorine compounds resulting in
diminished disinfecting capabilities
compared with free chlorine. These
chlorine compounds together with
chloramines form combined chlorine.
Combined chlorine and excess free
chlorine together result in total
chlorine. While free chlorine has a
much higher disinfectant potential,
combined chlorine has a much
higher stability and has a lesser
volatility. There should be sufficient
levels of unreacted free chlorine
for adequate disinfection, but not
so much as to become harmful.
Free & Total
Chlorine Test Kit
HI96711C is supplied with CAL Check™ standards, sample
cuvettes (2) with caps, 9V battery, scissors, cuvette cleaning
cloth, instrument quality certificate, instruction manual and rigid
carrying case.
Ordering Info
Reagents sold separately
Reagents and
Standards
Specifications
Method
checker disc
Range
0.00-0.70 mg/L (ppm); 0.03.5 mg/L (ppm)
Smallest
Increment
0.02 mg/L (ppm)
0.1 mg/L (ppm)
HI96701-11
CAL Check™ standard cuvettes (free Cl)
HI93701-01
reagents for 100 tests (free Cl)
Chemical
Method
DPD
HI93701-03
reagents for 300 tests (free Cl)
# Tests
200
HI96711-11
CAL Check™ standard cuvettes (total Cl)
HI93711-01
reagents for 100 tests (total Cl)
HI93711-03
reagents for 300 tests (total Cl)
Ordering
Info
HI38017 test kit is
supplied with HI93701-0
free chlorine reagent (100
packets), HI93711-0 total
chlorine reagent (100
packets), demineralizer
bottle with filter cap for
12 L, checker disc, glass
vials with caps (2) and 3 mL
plastic pipettes
HI96701C
Free Chlorine Portable
Photometers
• CAL Check™
Total Chlorine
The chlorination of water supplies
and polluted waters is used mainly
to destroy or deactivate diseaseproducing microorganisms. It also
serves to improve the quality of
drinking waters as chlorine reacts
with ammonia, iron, manganese,
sulfide and some organic substances.
Nevertheless, high amounts of
chlorine will produce adverse
effects, like formation of compounds
which are potentially carcinogenic
(e.g. chloroform) or harmful to
aquatic life (e.g. chloramines). It
is essential to ensure that the
proper amount of chlorine has
been added in order to fulfill the
primary purpose of disinfecting and
to minimize any adverse effects.
• BEPS (Battery Error
Prevention System)
• GLP Features
The HI96701C measures the
free chlorine (Cl₂) content in
water samples.
Specifications
HI96701C Free Chlorine
Range
0.00 to 5.00 mg/L (ppm)
Resolution
0.01 mg/L from 0.00 to 3.50 mg/L; 0.10 mg/L above 3.50 mg/L
Accuracy
@ 25°C (77°F)
±0.03 mg/L ±3% of reading
Ordering Info
HI96701C is supplied with CAL Check™ standards, sample cuvettes
(2) with caps, 9V battery, cuvette wiping cloth, instrument quality
certificate, instruction manual and rigid carrying case.
Reagents sold separately
Reagents and
Standards
HI96701-11
CAL Check™ Standard Cuvettes
HI93701-01
reagents for 100 tests
HI93701-03
reagents for 300 tests
Kit versions end
in a “C”
Our 96 series photometers
that end with a “C” in the part
number include CAL Check™
standard cuvettes, cuvette
cleaning cloth and scissors
(when applicable) bundled in
a hardshell carrying case
5
Chlorine / Chlorine Dioxide / Chromium (Hexavalent)
HI3831T
Total Chlorine
Test Kit
with Color Cube
Chlorine Dioxide
HI96738C
Chlorine Dioxide
Portable
Photometer
Chlorine Dioxide is used primarily as
a disinfectant in drinking water and
also in various industrial processes.
In drinking water applications, it is
gaining popularity over chlorine,
considering that it does not
generate trihalomethanes when
reacting with organic compounds.
In industrial applications, it is
used as a bleaching agent in such
applications as pulp and paper.
• CAL Check™
• BEPS (Battery Error
Prevention System)
• GLP Features
The HI96738C meter measures the chlorine dioxide content in water samples.
This meter uses an exclusive positive-locking system to ensure that the
cuvette is in the same place every time it is placed into the measurement cell.
Specifications
Method
colorimetric
Range
0.0-2.5 mg/L (ppm)
Smallest
Increment
0.5 mg/L (ppm)
Chemical
Method
DPD
# Tests
50
Ordering
Info
HI3831T test kits comes
with color comparison
cube, 20 mL chlorine
reagent 1, 15 mL chlorine
reagent 2 and 15 mL
chlorine reagent 3
Specifications
HI96738C Chlorine Dioxide
Range
0.00 to 2.00 mg/L (ppm)
Resolution
0.01 mg/L
Accuracy
@ 25°C (77°F)
±0.10 mg/L ±5% of reading
Ordering Info
HI3829F
Free Chlorine
Test Kits
With Color Cube
HI96738C is supplied with CAL Check™ standards, sample cuvettes
(2) with caps, 9V battery, scissors, cuvette wiping cloth, instrument
quality certificate, instruction manual and rigid carrying case.
Reagents sold separately
Reagents and
Accessories
HI96738-11
CAL Check™ standard cuvettes
HI93738-01
reagents for 100 tests
HI93738-03
reagents for 300 tests
Chlorine and bromine react rapidly
with microbiological species and
chemicals in water. This reactivity is
both their strength and weakness.
Since chemical reactions are
usually the first to take place, only
the small residual of the product
remaining after the chemical
reaction is completed is available
for microbiological control.
Chlorine dioxide is a very safe and
potent biocide. It is effective over a
wide pH range in both hard and soft
water and does not react with most
other water treatment chemicals.
HI96723
Chromium VI HR
Portable
Photometer
Chromium
• CAL Check™
• BEPS (Battery Error
Prevention System)
• GLP Features
The HI96723 measures the hexavalent chromium (Cr VI)
content in water and wastewater samples.
Specifications
Method
colorimetric
Specifications
HI96723 Chromium VI HR
Range
0.0-2.0 mg/L (ppm)
Range
0 to 1000 µg/L (ppb)
Smallest
Increment
0.5 mg/L (ppm)
Resolution
1 µg/L
Accuracy @ 25°C (77°F)
±5 µg/L ±4% of reading
Chemical
Method
DPD
# Tests
50
Ordering Info
HI96723 is supplied with sample cuvettes (2) with caps, 9V battery,
instrument quality certificate and instruction manual.
Ordering
Info
HI3829F test kit comes
with color comparison
cube, 20 mL reagent 1 and
15 mL reagent 2
6
Chlorine Dioxide is considered
a highly-effective, eco-friendly
microbiocide that carries a number
of important regulatory approvals
from several international
organizations, including the US
EPA, FDA and UK Government
for many of its uses.
All compounds of chromium are
colored; the most important are
the chromates of sodium and
potassium and the dichromates
of potassium and ammonium. The
dichromates are used as oxidizing
agents in quantitative analysis, they
are also used in tanning leather.
Another compound of industrial
value is lead chromate, which is
chrome yellow, a valuable pigment.
Chromium compounds are used in
the textile industry as mordants,
and by the aircraft and other
industries for anodizing aluminum.
CAL Check™ standards and testing reagents sold separately
Reagents and
Standards
HI96723-11
CAL Check™ standard cuvettes
HI93723-01
reagents for 100 tests
HI93723-03
reagents for 300 tests
| Water and Wastewater Analysis Catalog
At normal temperatures, chromium
is corrosion-resistant. For this
reason, it plays an important role
in the plating industry as well
Conductivity
as cooling towers. In addition,
it has certain qualities that
make it useful in the production
processes of the textile industry.
Chromium is very useful in industry,
but the by-product hexavalent
chromium is produced, which is
a known carcinogen, and must
be removed from wastewater.
Conductivity
Electrical conductivity is the
ability of a solution to conduct an
electrical current. In metals, current
flow is carried by free electrons;
in liquids, the current is carried by
ions. Ions are formed when a solid
such as salt is dissolved in a liquid
to form electrical components
having opposite charges. The
sodium chloride separates to form
Na+ and Cl- ions. All ions present
in the solution contribute to
the current flowing through the
sensor and therefore, contribute
to the conductivity measurement.
Conductivity can be used as a
measure of the concentration
of ions present in the sample.
TDS
Total dissolved solids (TDS) is a
gravimetric measurement, but
because the solids in a solution are
predominately present in ionic form,
they can be approximated with
conductivity. The TDS scale
uses 2 µS/cm = 1 ppm (part per
million as CaCO₃), expressed
as 1 mg/L TDS. The method of
measurement is the same; the
conductivity meters make the
conversion and express the results
of a measurement in TDS units.
Resistivity
For solutions with low ionic
concentration, the measured
conductivity becomes difficult
and inaccurate. Therefore, the
resistivity scale is used to express
the results as opposed to fractions.
The numbers are exactly the inverse
of each other. The reciprocal of
0.10 µS/cm or 1/(0.10 x 10-⁶ S/
cm)] is then 10 x 10⁶ ohms x cm (10
MΩ x cm). This is also commonly
referred to as “mega-ohms.” Either
unit of measurement can be used
to state exactly the same value.
HI5321
Research Grade Conductivity/TDS Meter
EC/TDS/Resistivity/Salinity and Temperature
• Measures from ultrapure water to brine
• Four-point calibration
• Three selectable logging modes
(Auto, Manual and AutoHold)
• Up to 100 logging lots (10,000 records/lot)
• GLP features
• Connectivity via USB
• Real-time graphic displays
• Four-ring potentiometric probe
EC
TDS
Resistivity
Salinity
Temperature**
Ordering Info
Conductivity parameters are fully configurable and include:
temperature compensation coefficient, temperature
reference, selectable compensation method (linear, natural
water and no compensation), adjustable cell constant and
TDS factor.
All ranges of conductivity, resistivity and TDS are
autoranging or can be manually selected.
• Capacitive touch keypad
Specifications
The HI5321 is a research grade EC/TDS/resistivity/
salinity benchtop meter with a large, colored graphic
LCD screen with backlight and capacitive touch keypad.
It measures conductivity with an extended range from
0.001 µS/cm to 1 S/cm.
HI5321
Range
0.000 to 9.999 µS/cm; 10.00 to 99.99 µS/cm; 100.0 to 999.9 µS/cm;
1.000 to 9.999 mS/cm; 10.00 to 99.99 mS/cm; 100.0 to 1000.0 mS/cm actual EC*
Resolution
0.001 µS/cm; 0.01 µS/cm; 0.1 µS/cm; 0.001 mS/cm; 0.01 mS/cm; 0.1 mS/cm
Accuracy
±1% of reading (±0.01 µS/cm)
Calibration
automatic standard recognition, user standard single point / multi-point calibration
Range
0.000 to 9.999 ppm; 10.00 to 99.99 ppm; 100.0 to 999.9 ppm; 1.000 to 9.999 ppt;
10.00 to 99.99 ppt; 100.0 to 400.0 ppt actual TDS* (with 1.00 factor)
Resolution
0.001 ppm; 0.01 ppm; 0.1 ppm; 0.001 ppt; 0.01 ppt; 0.1 ppt
Accuracy
±1% of reading (±0.01 ppm)
Range
1.0 to 99.9 Ω•cm; 100 to 999 Ω•cm; 1.00 to 9.99 kΩ•cm; 10.0 to 99.9 kΩ•cm;
100 to 999 kΩ•cm; 1.00 to 9.99 MΩ•cm; 10.0 to 100.0 MΩ•cm
Resolution
0.1 Ω•cm; 1 Ω•cm; 0.01 kΩ•cm; 0.1 kΩ•cm; 1 kΩ•cm; 0.01 MΩ•cm; 0.1 MΩ•cm
Accuracy
±2% of reading (±1 Ω•cm)
Range
practical scale: 0.00 to 42.00 psu; natural sea water scale: 0.00 to 80.00 ppt;
percent scale: 0.0 to 400.0%
Resolution
0.01 for practical scale/natural sea water scale; 0.1% for percent scale
Accuracy
±1% of reading
Calibration
percent scale—one-point (with HI7037 standard); all others through EC
Range
-20.0 to 120°C; -4.0 to 248.0°F; 253.15 to 393.15K
Resolution
0.1°C; 0.1°F; 0.1K
Accuracy
±0.2°C ; ±0.4°F; ±0.2K (without probe)
HI5321 is supplied with HI76312 conductivity probe, HI76404W electrode holder, 1413 µS/cm conductivity standard
sachets (2), 12880 µS/cm conductivity standard sachets (2), 5000 µS/cm conductivity standard sachets (2), electrode
rinse solution sachets (2), 12 VDC adapter, quality certificates, quick start guide and instruction manual.
(*) Uncompensated conductivity (or TDS) is the conductivity (or TDS) value without temperature compensation.
(**) Reduced to actual probe limits
7
Conductivity
HI98192
Professional Waterproof
Meter
EC/TDS/Resistivity/Salinity Meter
• Waterproof
·· IP67 rated waterproof, rugged enclosure
• Calibration
·· Perform up to a five point calibration
• Temperature compensation
·· Automatic Temperature Compensation
·· Configurable temperature coefficient range
from 0.00 to 10.00%.°C
• Four-ring platinum probe
·· This probe can cover low EC samples to 1000 mS/cm
(actual EC)
Quick connect probe
The HI763133 four ring platinum
conductivity probe features a
quick connect DIN connector to
make attaching and removing
the probe simple and easy.
• Log-on-demand
·· Store measurement data at the press of a button
• GLP
·· GLP data provides data from previous calibration to ensure Good Laboratory Practices are met
• AutoHold
·· Automatically holds the first stable reading on the display
• Calibration timeout
·· Alerts when calibration is due at a specified interval
Specifications
• Help menu
·· On-screen context specific help is readily available
at the press of a button
Range
EC
• Backlit LCD
• Clear display
·· Dot matrix display with multifunction virtual keys
• Connectivity
·· PC connectivity via opto-isolated micro-USB with
HI92000 software
HI98192
TDS
0 to 400 mS/cm (shows values up to 1000 mS/cm actual conductivity)**
0.001 to 9.999 µS/cm*; 10.00 to 99.99 µS/cm; 100.0 to 999.9 µS/cm;
1.000 to 9.999 mS/cm; 10.00 to 99.99 mS/cm; 100.0 to 1000.0 mS/cm
(autoranging)
Resolution
0.001 µS/cm*; 0.01 µS/cm; 0.1 µS/cm; 0.001 mS/cm; 0.01 mS/cm; 0.1 mS/cm
Accuracy
±1% of reading (±0.01 µS/cm or 1 digit, whichever is greater)
Calibration
automatic up to five points with seven memorized standards
(0.00 µS/cm, 84.0 µS/cm, 1.413 mS/cm, 5.00 mS/cm, 12.88 mS/cm,
80.0 mS/cm, 111.8 mS/cm)
Range
0.00 to 99.99 ppm; 100.0 to 999.9 ppm; 1.000 to 9.999 g/L;
10.00 to 99.99 g/L; 100.0 to 400.0 g/L (autoranging)
Resolution
0.01 ppm; 0.1 ppm; 0.001 g/L; 0.01 g/L; 0.1 g/L
For Universal Applications
Accuracy
±1% of reading (±0.05 ppm or 1 digit, whichever is greater)
HI98192 is a waterproof, portable conductivity meter that
has an expanded conductivity range from 0.000 µS/cm to
400 mS/cm, as well as TDS, resistivity and three salinity
scales. This meter automatically recognizes the probe type
(two or four-ring) and allows the user to adjust the nominal
cell constant. HI98192 is also ready to perform accurate
EC measurement from groundwater to ultrapure water.
Range
1.0 to 99.9 Ω•cm; 100 to 999 Ω•cm; 1.00 to 9.99 KΩ•cm; 10.0 to 99.9 KΩ•cm;
100 to 999 KΩ•cm; 1.00 to 9.99 MΩ•cm; 10.0 to 100.0 MΩ•cm* (autoranging)
Resolution
0.1 Ω•cm; 1 Ω•cm; 0.01 KΩ•cm; 0.1 KΩ•cm; 1 KΩ•cm;
0.01 MΩ•cm; 0.1 MΩ•cm*
Accuracy
±1% of reading (±10 Ω or 1 digit, whichever is greater)
Range
% NaCl : 0.0 to 400.0%; practical salinity: 0.00 to 42.00 (PSU);
seawater scale: 0.00 to 80.00 (ppt)
Resolution
0.1%; 0.01
Accuracy
±1% of reading
Calibration
max. one point only in % NaCl range with HI7037 standard; use
conductivity calibration for all other ranges
Range
-20.0 to 120.0°C; -4.0 to 248.0°F
Resolution
0.1°C; 0.1°F
Accuracy
±0.2°C; ±0.4°F (excluding probe error)
Calibration
one or two points
Resistivity
Salinity
Temperature †
Ordering
Info
8
| Water and Wastewater Analysis Catalog
HI98192 is supplied with HI763133 conductivity probe, HI7031M 1413 µS/cm calibration
solution (230 mL), HI7035M 111.8 mS/cm calibration solution (230 mL), 100 mL plastic
beaker (2), HI92000 PC software, HI920015 micro USB cable, 1.5V AA batteries (4),
instruction manual, quick start guide, quality certificate and rugged carrying case with
custom insert.
* The 0.000 µS/cm EC range and 0.1 MΩ•cm resistivity
range are not available with the supplied 4m cable probe
** Uncompensated temperature reading
(†) Reduced to
actual sensor limits
Conductivity / Copper
HI98311 • HI98312
EC/TDS/Temperature
Testers
• Waterproof and designed to float
• Automatic Temperature Compensation
• HOLD button to freeze readings on the display
Temperature
Ordering
Info
• CAL Check™
• BEPS (Battery Error
Prevention System)
• Exposed temperature sensor for fast response
• GLP Features
These testers include features such as: a
replaceable graphite electrode, adjustable
TDS ratio, °C or °F measurement, Automatic
Temperature Compensation with adjustable β,
battery level indicator, stability indicator,
automatic shut-off and automatic calibration.
The HI96702C measures the
copper content in water and wastewater.
Specifications
TDS
Copper, High Range
Portable
Photometer
• BEPS (Battery Error Prevention System)
The replaceable graphite conductivity
electrode offers greater accuracy by resisting
contamination by salt deposits in the sample.
EC
HI96702C
HI98311 (DiST®5)
Specifications
0.00 to 5.00 mg/L (ppm)
Resolution
0.01 mg/L (ppm)
Accuracy @ 25°C (77°F) ±0.02 mg/L ±4% of reading @ 25°C
Ordering
Info
HI98312 (DiST®6)
Range
0 to 3999 µS/cm
0.00 to 20.00 mS/cm
Resolution
1 µS/cm
0.01 mS/cm
Accuracy
±2% F.S.
±2% F.S.
Calibration
automatic, one point at
1413 µS/cm
automatic, one point at
12.88 mS/cm
Range
0 to 2000 mg/L (ppm)
0.00 to 10.00 g/L (ppt)
Resolution
1 mg/L (ppm)
0.01 g/L (ppt)
Accuracy
±2% F.S.
±2% F.S.
Calibration
automatic, one point at
1382 mg/L (ppm)
automatic, one point at
6.44 g/L (ppt)
Range
0.0 to 60.0°C / 32.0 to
140.0°F
0.0 to 60.0°C / 32.0 to
140.0°F
Resolution
0.1°C / 0.1°F
0.1°C / 0.1°F
Accuracy
±0.5°C / ±1°F
±0.5°C / ±1°F
HI98311 (DiST®5) and HI98312 (DiST®6) are supplied with HI73311
EC/TDS probe, HI73128 probe removal tool, batteries and instructions.
HI96702C Copper HR
Range
HI96702C is supplied with CAL Check™ standards,
sample cuvettes (2) with caps, 9V battery, scissors, cuvette
cleaning cloth, instrument quality certificate, instruction
manual and rigid carrying case.
Reagents sold separately.
Reagents and
Standards
HI96702-11
CAL Check™ Standard Cuvettes
HI93702-01
Reagents for 100 tests
HI93702-03
Reagents for 300 tests
Copper
Copper is an essential trace element in the human diet (the daily requirement
is around 2.0 mg) and a factor in plant metabolism. On the other hand, corrosion
of copper alloys in pipe fittings may introduce considerable quantities of copper
into water supplies.
HI3847
Copper Test Kit
HI98308 (PWT)
Water Purity Tester
Pure Water Test (PWT) enables users to check the purity
of your distilled or demineralized water in laboratory or
harsh industrial environments. PWT is suited for fields
where distilled, demineralized or pure water is used.
Specifications
Specifications
HI98308 (PWT)
Range
Resolution
Accuracy
±2% F.S.
Calibration
manual, one point
Ordering
Info
Method
colorimetric
0.0 to 99.9 µS/cm
Range
0.0-2.5 mg/L (ppm)
0.1 µS/cm
Smallest
Increment
0.5 mg/L (ppm)
Chemical Method
bicinchoninic acid
# Tests
100
Ordering
Info
HI3847 test kit comes with HI3847-0 reagent (100 packets) and color
comparison cube.
HI98308 (PWT) is supplied with protective
cap, calibration screwdriver, batteries and
instructions.
9
Cyanide / Fluoride / Hardness
HI96729C
HI96735C
Fluoride Portable
Photometer
Hardness, EPA
Portable
Photometer
• CAL Check™
• BEPS (Battery Error
Prevention System)
• CAL Check™
• BEPS (Battery Error
Prevention System)
• GLP Features
• GLP Features
The HI93735C measures the total hardness in drinking, surface and wastewater.
The HI96729C meter measures the fluoride (F–) content in drinking,
surface and wastewaters. The amount of reagent is precisely dosed by
use of the supplied automatic pipette for maximum repeatability.
Specifications
HI96729C Fluoride LR
Range
0.00 to 2.00 mg/L (ppm)
Resolution
0.01 mg/L
Accuracy @ 25°C (77°F)
±0.03 mg/L ±3% of reading
Ordering
Info
HI96729C is supplied with CAL Check™ standards, sample
cuvettes (2) with caps, 2000 µL automatic pipette with
instruction sheet, 9V battery, cuvette wiping cloth, instrument
quality certificate, instruction manual and rigid carrying case.
Specifications
Hardness MR (P2)
Hardness HR (P3)
Range
0 to 250 mg/L
(ppm)
200 to 500 mg/L
(ppm)
400 to 750 mg/L
(ppm)
Resolution
1 mg/L from 0 to
100 mg/L,
5 mg/L from 100 to
250 mg/L
1 mg/L from 0 to
100 mg/L
5 mg/L, from 100
to 750 mg/L
5 mg/L
Accuracy @ 25°C
(77°F)
±5 mg/L ±4%
of reading
±7 mg/L ±3%
of reading
±10 mg/L ±2%
of reading
Ordering
Info
HI96735C is supplied with sample cuvettes (2) with caps, 9V battery,
instrument quality certificate and instruction manual.
CAL Check™ standards and testing reagents sold separately
Reagents sold separately
Reagents and
Standards
HI93703-53
reagent for reducing chlorine concentration
HI96729-11
CAL Check™ standard cuvettes
HI93729-01
reagents for 100 tests
HI93729-03
reagents for 300 tests
HI96735C Hardness, Total
Hardness LR (P1)
Reagents and
Standards
HI96735-11
CAL Check™ standard cuvettes
HI93735-00
reagents for 100 tests (0-250 mg/L)
HI93735-01
reagents for 100 tests (200-500 mg/L)
HI93735-02
reagents for 100 tests (400-750 mg/L)
HI93735-0
reagents for 100 tests (0-750 mg/L)
HI4109
HI4110
HI38033
Hardness, Total
(as CaCO₃) Test
Kit
Hardness, Total
(as CaCO₃) Test
Kit
ISE
ISE
0-30 gpg range
Medium range
For use with
compatible ISE
meters
120 mm
Fluoride
Ion Selective
Electrode
120 mm
Cyanide
Ion Selective
Electrode
For use with
compatible ISE
meters
012 mm
Specifications
Specifications
012 mm
10-²M to 1•10-⁶M
260 to 0.02 mg/L
(ppm)
Measurement
Range
>11
Optimum pH Range
5 to 8
Temperature Range 0 to 80°C
Temperature Range
0 to 80°C
Approximate Slope
-57
Approximate Slope
-56
Measurement
Range
Optimum pH Range
1M to 1•10-⁶M
Sat. to 0.02 mg/L
(ppm)
Specifications
Method
titration
Specifications
Range
0-30 gpg
Method
titration
Range
40-500 mg/L (ppm)
Smallest
Increment
20 mg/L (ppm)
Chemical
Method
EDTA
# Tests
50 avg.
Ordering
Info
HI3841 test kit comes
with 30 mL hardness
MR reagent and 50 mL
calibrated vessel.
Smallest
Increment
1 gpg
EDTA
Body O.D.
12 mm
Body O.D.
12 mm
Chemical
Method
Insertion Length
120 mm
Insertion Length
120 mm
# Tests
100
Body Material
PEI
Body Material
PEI/epoxy
Ordering
Info
HI4109 solid-state;
combination ISE with
1m coaxial cable and
BNC connection
Ordering
Info
HI4110 solid-state;
combination ISE with
1m coaxial cable and
BNC connection
Ordering
Info
HI38033 test kit comes
with 30 mL buffer solution,
10 mL calmagite indicator,
75 mL EDTA solution (2), 20
mL plastic beaker with cap
and 1 mL plastic pipette.
10
HI3841
| Water and Wastewater Analysis Catalog
* 1 gpg = 17 ppm CaCO₃
Iron / Manganese
Fluoride
Fluoride is best known for
preventing tooth decay. Water
authorities often add fluoride
to drinking water to maintain
approximately a 1.0 mg/L (ppm)
concentration. Fluoride can be
found naturally in groundwater,
particularly if a reservoir is in the
proximity of sea water. While
fluoride does help prevent tooth
decay, too little can be ineffective
and too much can cause staining.
Hardness
Total hardness, that is the presence
of magnesium and calcium, is
due mainly to the runoff water
dissolving these salts as it flows
or filters through different strata.
Hardness can cause scaling of pipes
in cooling and heating systems.
Iron
Iron is naturally present in water
in low concentrations, but it
reaches high concentrations in
wastewater effluents. The iron
concentration in water needs to
be monitored because it becomes
harmful above certain levels.
In domestic water, for
instance, iron can cause an
unpleasant taste, stain laundry,
damage kitchenware and favor
the growth of certain bacteria.
Iron is also an indicator of ongoing
corrosion in water cooling and
heating systems. Moreover, iron
is normally monitored in mining
wastewater to avoid contamination.
Manganese
Manganese is one of the most
common metals present in
nature and is used in many
industrial applications, such as
the production of fertilizers and
in the pharmaceutical industry.
Manganese salts are also used in
iron alloys (steel manufacturing) and
non-iron alloys as it improves their
corrosion resistance and hardness
HI96746C • HI96721C
HI38040
Iron Portable
Photometers
Iron (Fe²+ & Fe³+)
Test Kit
• CAL Check™
Medium Range with
Checker® Disc
• BEPS (Battery Error
Prevention System)
• GLP Features
The HI 96746C meter measures the iron content in water, wastewater
and seawater. The HI 96721 meter measures total iron (Fe) content in
water samples.
Specifications
HI96746C Iron LR
Range
0.00 to 1.60 mg/L (ppm)
HI96721C Iron HR
0.00 to 5.00 mg/L (ppm)
Specifications
Resolution
0.01 mg/L
0.01 mg/L
Accuracy @ 25°C (77°F)
±0.01 mg/L ±8% of reading
±0.04 mg/L ±2% of reading
Method
checker disc
Range
0.0-5.0 mg/L (ppm)
Ordering
Info
HI96746C and HI96721C is supplied with CAL Check™
standards, sample cuvettes (2) with caps, 9V battery, scissors,
cuvette wiping cloth, instrument quality certificate, instruction
manual and rigid carrying case.
Smallest
Increment
0.1 mg/L (ppm)
Chemical
Method
phenanthroline
# Tests
100
Ordering
Info
HI38040 test kit comes
with 100 packets iron
reagent, checker disc,
glass vials with caps (2)
and 3 mL plastic pipette.
Reagents sold separately
HI96746
Reagents and
Standards
HI96721
HI96746-11
CAL Check™ standard cuvettes
HI93746-01
liquid reagents for 50 tests
HI93746-03
liquid reagents for 150 tests
HI96721-11
CAL Check™ standard cuvettes
HI93721-01
powder reagents for 100 tests
HI93721-03
powder reagents for 300 tests
HI38041
HI96748C • HI96709C
Manganese Portable
Photometers
Iron (Fe²+ & Fe³+)
Test Kit
• CAL Check™
High Range with
Checker® Disc
• BEPS (Battery Error
Prevention System)
• GLP Features
The HI96748C measures the low range
manganese content in water and wastewater. The HI96709C measures
the high range manganese content in water and wastewater.
Specifications
HI96748C
Manganese, LR
HI96709C
Manganese, HR
Specifications
Range
0 to 300 µg/L (ppb)
0.0 to 20.0 mg/L (ppm)
Method
checker disc
Resolution
1 µg/L
0.1 mg/L
Range
0.0-10.0 mg/L (ppm)
Accuracy @ 25°C (77°F)
±10 µg/L ±3% of reading
±0.2 mg/L ±3% of reading
Smallest
Increment
0.2 mg/L (ppm)
Ordering
Info
HI96748C and HI96709C is supplied with CAL Check™
standards, sample cuvettes (2) with caps, 9V battery, scissors,
cuvette wiping cloth, instrument quality certificate, instruction
manual and rigid carrying case.
Chemical
Method
phenanthroline
# Tests
100
Ordering
Info
HI38041 test kit comes
with 100 packets iron
reagent, 500 mL deionized
water, checker disc, glass
vials with caps (2), 3 mL
plastic pipettes and long
plastic pipette.
Reagents sold separately
HI96748
Reagents and
Standards
HI96709
HI96748-11
CAL Check™ standard cuvettes
HI93748-01
liquid reagents for 50 tests
HI93748-03
liquid reagents for 150 tests
HI96709-11
CAL Check™ standard cuvettes
HI93709-01
liquid reagents for 100 tests
HI93709-03
liquid reagents for 300 tests
11
Nitrate / Oxygen, Dissolved
HI96728C
HI3874
Nitrate (as NO-3 —N)
Portable
Photometer
Nitrate
Test Kit
HI4113
Nitrate
Ion Selective
Electrode
• BEPS (Battery Error
Prevention System)
120 mm
ISE
• CAL Check™
For use with
compatible ISE
meters
• GLP Features
012 mm
Specifications
The HI96728C measures the nitrate content in water and wastewater.
Measurement
Range
1.0M to 1•10-⁵M
6200 to 0.62 mg/L
(ppm) 1400 to 0.4
mg/L (ppm) as N
Specifications
HI96728C Nitrate
Specifications
Range
0.0 to 30.0 mg/L (ppm)
Method
colorimetric
Optimum pH Range
3.0 to 8
Resolution
0.1 mg/L
Range
0-50 mg/L (ppm)
Temperature Range
0 to 40°C
Accuracy @ 25°C (77°F)
±0.5 mg/L ±10% of reading
Smallest
Increment
10 mg/L (ppm)
Approximate Slope
-56
Body O.D.
12 mm
Ordering
Info
HI96728C is supplied with CAL Check™ standards, sample
cuvettes (2) with caps, 9V battery, scissors, cuvette wiping
cloth, instrument quality certificate, instruction manual
and rigid carrying case.
Insertion Length
120 mm
Body Material
PEI/PVC
Ordering
Info
HI4113 combination
ISE with polymer
membrane, 1m
coaxial cable and
BNC connection
Reagents sold separately
Reagents and
Standards
HI96728-11
CAL Check™ standard cuvettes
HI93728-01
reagents for 100 tests
HI93728-03
reagents for 300 tests
Chemical
Method
cadmium reduction
# Tests
100
Ordering
Info
HI3874 test kit comes
with 100 packets nitrate
reagent, glass cuvette and
color comparison cube.
HI96732
HI3810
• CAL Check™
The Hanna dissolved oxygen portable test kit can determine
the oxygen concentration in water quickly and easily.
Dissolved Oxygen Portable
Photometer
• BEPS (Battery Error
Prevention System)
Dissolved Oxygen
Test Kit
• GLP Features
Specifications
HI96732 Oxygen, Dissolved
Range
0.0 to 10.0 mg/L (ppm)
Resolution
0.1 mg/L
Accuracy
@ 25°C (77°F)
Ordering
Info
Reagents and
Standards
12
±0.4 mg/L ±3% of reading
HI96732 is supplied with sample cuvettes (2) with caps, 9V battery,
instrument quality certificate and instruction manual
CAL Check™ standards and testing reagents sold separately
HI96732-11
CAL Check™ standard cuvettes
HI93732-01
reagents for 100 tests
HI93732-03
reagents for 300 tests
| Water and Wastewater Analysis Catalog
Specifications
Method
titration
Range
0.0 to 10.0 mg/L (ppm)
Smallest
Increment
0.1 mg/L (ppm)
Chemical
Method
modified Winkler
# Tests
110 avg.
Ordering
Info
HI3810 test kit comes with 30 mL manganous sulfate solution, 30 mL alkaliazide reagent, 60 mL sulfuric acid solution (2), 10 mL starch indicator, 120
mL titrant solution, glass bottle with stopper, 10 mL calibrated vessel and
calibrated syringe with tip.
Oxygen, Dissolved
Nitrate
Nitrate ions are present in trace
amounts in surface water and in
higher levels in some groundwater.
Nitrate is found only in small quantities in domestic wastewater, but can
reach higher concentration (up to
30 mg/L as nitrogen) in the outflow
of nitrifying biological treatment
plants. Excessive amounts can
contribute to methemoglobinemia:
infant death and adult illness. In
order to prevent this, a 10 mg/L limit
(as nitrogen) has been imposed on
drinking water.
Dissolved Oxygen
The concentration of dissolved
oxygen in water is extremely
important in nature as well in
man’s environment. In the oceans,
lakes, rivers, and other surface
water bodies, dissolved oxygen
is essential to the growth and
development of aquatic life.
HI5421
Research Grade Bench Meter
Dissolved Oxygen and BOD
• Measures DO, atmospheric pressure and temperature
• Logging
·· Large log memory with different logging methods
·· Up to 100 log lots with 50,000 records/lots
• Automatic barometric pressure compensation
• BOD, OUR and SOUR inside and outside limits alarm
• GLP features
• Real-time graphic displays
• Capacitive touch keypad
• PC compatible via USB
Specifications
HI5421
Range
Barometric Pressure
Temperature
Ordering
Info
DO measurements can be performed with ppm,
mg/L or % air saturation units of measurement.
DO measurements feature automatic or manual
temperature and atmospheric pressure compensation,
as well as manual salinity compensation.
The DO probe uses the polarographic principal of
measurement and has a built-in temperature sensor.
• Up to 10 user profiles
DO
The HI5421 is a research grade dissolved oxygen
benchtop meter with extensive capabilities in
measuring DO as well as BOD (Biological Oxygen
Demand), OUR (Oxygen Uptake Rate), SOUR
(Specific Oxygen Uptake Rate) and temperature.
0.00 to 90.00 ppm (mg/L); 0.0 to 600.0 % saturation
Resolution
0.01 ppm; 0.1% saturation
Accuracy
±1.5% of reading ±1 digit
Calibration
automatic using one or two-point calibration; user calibration single point
Range
450 to 850 mmHg; 600 to 1133 mBar; 60 to 133 KPa; 17 to 33 inHg;
8.7 to 16.40 psi; .592 to 1.118 atm
Resolution
1 mm Hg
Accuracy
±3 mm Hg + 1 least significant digit
Range
-20.0 to 120°C; -4.0 to 248.0°F; 253.15 to 393.15K
Resolution
0.1°C; 0.1°F; 0.1K
Accuracy
±0.2°C ; ±0.4°F; ±0.2K (without probe)
HI5421 is supplied with HI764083 DO probe, HI76404W electrode holder,
HI7041S electrolyte solution (30 mL), membrane caps (2), o-rings (2), 12 VDC adapter, quality certificates,
quick start guide and instruction manual.
13
Oxygen, Dissolved
HI98193
Professional
Waterproof
Meters
Dissolved Oxygen and BOD
• Choice of units
·· Display units in % saturation or mg/L (ppm)
• Salinity compensation
·· Users can set the salinity value
• Automatic pressure compensation
·· Built-in barometer with user-selectable units (mmHg, inHg, atm, psi, kPa, mbar)
Quick connect probe
The HI764073 DO probe features
a quick connect DIN connector
to make attaching and removing
the probe simple and easy.
• Built-in calculations
·· Determination of Biochemical Oxygen Demand (BOD), Oxygen Uptake Rate (OUR) and Specific Oxygen Uptake Rate (SOUR)
• Polarization
·· Automatic polarization of probe at startup
• Membrane caps
·· Ready-to-use PTFE preformed membrane caps
• Waterproof
·· IP67 rated waterproof, rugged enclosure
• Log-on-demand
·· Store measurement data at the press of
a button
• GLP
·· GLP data provides data from previous calibration to ensure Good Laboratory Practices are met
• AutoHold
·· Automatically holds the first stable reading on the display
• Calibration timeout
·· Alerts when calibration is due at a
specified interval
For Universal Applications
The HI98193 portable dissolved oxygen
meter has extended ranges of up to 50 ppm
and 600% saturation. When measuring
dissolved oxygen, compensations for salinity,
temperature and pressure are essential to
improve the accuracy and precision of readings.
Salinity compensation allows for direct
determination of dissolved oxygen in saline
waters. Temperature compensation is automatic
with the probes built-in sensor, which features
a one or two-point calibration. Pressure
compensation with the meter’s built-in barometer
can be validated against a reference barometer,
and if needed, can be recalibrated in userselectable units (mmHg, inHg, atm, psi, kPa, mbar).
With the internal barometer, the HI98193 is able
to compensate for changes in barometric pressure
so there is no need for charts, altitude information
or external barometric pressure information.
Other features include measurement, methods
and calculations for BOD, OUR and SOUR.
HI98193
• Help menu
·· On-screen context specific help is readily available at the press of a button
Range
0.00 to 50.00 mg/L (ppm); 0.0 to 600.0% saturation
Resolution
0.01 mg/L (ppm); 0.1% saturation
Accuracy (@25°C/77°F)
±1.5% of reading ±1 digit
• Clear display
·· Dot matrix display with multifunction
virtual keys
Calibration
automatic one or two point at 100 % (8.26 mg/L) and 0 %
(0 mg/L).; manual one point using a value entered by the user
in % saturation or mg/L
Range
450 to 850 mmHg
• Connectivity
·· PC connectivity via opto-isolated micro-USB with HI92000 software
Resolution
1 mmHg
Accuracy (@25°C/77°F)
± 3 mmHg within ±15% from the calibration point
Calibration
one point at any in range pressure value
DO
• Backlit LCD
• 200 hour battery life
·· Approximately 200 hours of continuous use
Atmospheric
Pressure
Temperature
Ordering
Info
14
| Water and Wastewater Analysis Catalog
Range
-20.0 to 120.0°C; -4.0 to 248.0°F
Resolution
0.1°C; 0.1°F
Accuracy (@25°C/77°F)
±0.2°C; ±0.4°F (excluding probe error)
Calibration
one or two point at any in range temperature value
HI98193 is supplied with HI764073 DO probe, HI7040 bi-component zero oxygen solution
(260 mL), HI7041S electrolyte solution (30 mL), preformed PTFE membrane caps (2),
DO protective cap, o-rings (2), 100 mL plastic beaker (2), HI92000 PC software, HI920015 micro
USB cable, 1.5V AA batteries (4), instruction manual, quick start guide, quality certificate and
rugged carrying case with custom insert.
Oxygen, Chemical Oxygen Demand (COD)
Wastewater needs to be monitored closely to
prevent environmental pollution and human illness
Chemical Oxygen Demand
Chemical Oxygen Demand (COD) is a
measure of the biologically available and
inert organic matter that is susceptible to
oxidation by a strong oxidizing agent.
The Hanna COD method is based on the well
established closed dichromate-reflux colorimetric
method. The colorimetric measurement of
COD is faster and easier to perform than the
titrimetric analysis; additional reagents are not
required. The sample is added to the reagent
vial and digested under closed reflux conditions
and allowed to cool before measurement
is taken. Reference standards can be made
using potassium hydrogen phthalate (KHP),
1 mg of KHP is equal to 1.175 mg COD.
The US Environmental Protection Agency (EPA)
specifies that the dichromate reflux method is the
only method acceptable for reporting purposes.
The advantage in using this method includes
certifiable results as well as high accuracy.
COD Testing Applications
COD is used as a measurement of pollutants.
It is normally measured in both municipal and
industrial wastewater treatment plants and
gives an indication of the efficiency of the
treatment process. COD is measured on both
influent and effluent water. The efficiency of
the treatment process is normally expressed
as COD removal, measured as a percentage of
the organic matter purified during the cycle.
COD has further applications in power plant
operations, chemical manufacturing, commercial
laundries, pulp and paper mills, agriculture and
animal waste runoff, environmental studies and
general education. Hanna's COD meter can be
used in the laboratory or for on-site testing. The
measurement procedure has been designed
for ease of use by personnel at any skill level.
Nitrogen
Wastewater monitoring examples:
important because it relates to the quantity of
COD Influent
COD Effluent
COD Removal
1214
451
62%
948
328
63%
1341­­
307
77%
Beyond COD: Nitrogen and
Phosphorus
The goal in wastewater treatment is not
only COD reduction, but also to control
nitrogen and phosphorus, which are
responsible for eutrophication phenomena
in natural environments. COD, nitrogen,
and phosphorus control are performed
not only to obey environmental protection
laws, but also to optimize plant costs.
Effective monitoring and control of parameters
such as ammonia, nitrate, total nitrogen
and total reactive phosphorus allow plant
managers to profile and improve the health
of aquatic ecosystems. By accurately
monitoring levels of each specific pollutant,
operational parameters can be adjusted to
maintain high efficiency of biodegradation
treatments while also minimizing costs.
When a treatment plant uses processes like
nitrification and denitrification, it is important to
monitor and maintain the equilibrium between
ammonia-nitrogen, nitrate and total nitrogen
during the bio-treatment. The nitrogen level is
oxygen provided in the nitrification area. Ammonia
is also controlled because it can become very toxic
for the bacteria responsible for denitrification.
Nitrification
NH₃ + O₂
NO₂̄ + H₂O
nitrosomonas
bacteria
nitrobacter
bacteria
NO₂̄ + 3H+ + 2e¯
NO₃̄ + 2H+ + 2e¯
Denitrification
3NO₃̄ + 10e¯ + 12H+
N₂ + 6H₂O
Phosphorus
Phosphorus is measured during both biological
and chemical dephosphorization. An excessive
amount of phosphate discharged in superficial
waters or in bio-treatment tanks causes an
increase of algae and system eutrophication.
15
Oxygen, Chemical Oxygen Demand (COD)
HI83214
COD Meter and
Multiparameter
Photometer
for Wastewater Analysis
• Easy COD measurement
·· The HI83214 multiparameter photometer has
preprogrammed curves to measure COD levels at three ranges at the touch of a button
• Outstanding measurement quality
·· An advanced optical system assures high accuracy
measurements throughout the entire range
• Save space in your laboratory
·· The compact size of the HI83214 allows users to eliminate
the clutter of bulky and costly spectrophotometers
• Log up to 200 samples
The HI83214 is designed and built to perform COD analysis in
accordance with EPA 410.4 and ISO 15705:2002 standards.
Ensuring accurate and repeatable results, it is the ideal
tool for documenting waste treatment processes.
Besides the fundamental parameter of COD, HI83214
also measures total ammonia, free and total chlorine,
nitrate, nitrogen, and various forms of phosphorus.
The HI83214 allows for a complete wastewater
analysis in a single, powerful instrument.
Accessories
Specifications
HI83214
Light Source
tungsten lamps with narrow-band interference filters
Light Detector
silicon photocell
Ordering Info
HI83214 is supplied with glass cuvettes (5), 9V batteries (2),
12 VDC adapter and instructions
COD Test
Range
Method
Reagent
Code
COD LR
0 to 150 mg/L
dichromate EPA‡
dichromate mercury-free◊◊
dichromate ISO◊
HI93754A-25
HI93754D-25
HI93754F-25
COD MR
0 to 1500 mg/L
dichromate EPA‡
dichromate mercury-free◊◊
dichromate ISO◊
HI93754B-25
HI93754E-25
HI93754G-25
COD HR
0 to 15000 mg/L
dichromate
HI93754C-25
HI839800
COD test Tube Heater
The HI839800 COD reactor is constructed
of durable materials. The aluminum block
incorporates a 25-vial capacity and a well for a
reference temperature probe.
Range
Method
Reagent Code
Ammonia, LR
0.00 to 3.00 mg/L
Nessler
HI93764A-25
Ammonia, HR
0 to 100 mg/L
Nessler
HI93764B-25
Chlorine, Free
0.00 to 5.00 mg/L
DPD
HI93701-01
Chlorine, Total
0.00 to 5.00 mg/L
DPD
HI93711-01
HI740217
Lab Safety Shield
Nitrate
0.0 to 30.0 mg/L
chromotropic acid
HI93766-50
For safety, the optional HI740217 safety
shield and HI740216 test tube cooling
rack for the HI839800 are strongly
recommended.
Nitrogen, Total
0.0 to 25.0 mg/L
chromotropic acid
HI93767A-50
Nitrogen, Total HR
10 to 150 mg/L
chromotropic acid
HI93767B-50
Phosphorus, Reactive
0.00 to 5.00 mg/L
ascorbic acid
HI93758A-50
Phosphorus, Acid
Hydrolyzable
0.00 to 5.00 mg/L
ascorbic acid
HI93758B-50
Phosphorus, Total
0.00 to 3.50 mg/L
ascorbic acid
HI93758C-50
Phosphorus, Reactive HR
0.0 to 100.0 mg/L
vanadomolybdophosphoric
acid
HI93763A-50
Phosphorus, Total HR
0.0 to 100.0 mg/L
vanadomolybdophosphoric
acid
HI93763B-50
HI740216
Test Tube Cooling Rack
Some analytical methods require digestion
of the sample. For digestion of the vials, use
the Hanna HI839800 reactor only.
16
Parameter
| Water and Wastewater Analysis Catalog
Notes:
‡ Method with chromium-sulfuric acid is officially recognized by EPA for wastewater analysis.
◊ The HI93754F-25 and HI93754G-25 method follows the official method ISO 15705.
◊◊ This method is recommended for general purpose analysis with no chloride interference.
Oxygen, Chemical Oxygen Demand (COD)
Range
Method
Reagent
Code
COD LR
0 to 150 mg/L
dichromate EPA‡
dichromate mercury-free◊◊
dichromate ISO◊
HI93754A-25
HI93754D-25
HI93754F-25
COD MR
0 to 1500 mg/L
dichromate EPA‡
dichromate mercury-free◊◊
dichromate ISO◊
HI93754B-25
HI93754E-25
HI93754G-25
COD HR
0 to 15000 mg/L
dichromate
HI93754C-25
Range
Method
Reagent
Code†
COD Test
Water Quality
Test
HI83099
COD Meter and
Multiparameter Photometer
• Easy COD measurement
Alkalinity
0 to 500 mg/L (ppm) as CaCO₃
bromocresol green
HI93755-01
Aluminum
0.00 to 1.00 mg/L
aluminon
HI93712-01
Ammonia MR
0.00 to 10.00 mg/L
Nessler
HI93715-01
Ammonia LR
0.00 to 3.00 mg/L
Nessler
HI93700-01
Bromine
0.00 to 8.00 mg/L
DPD
HI93716-01
Calcium
0 to 400 mg/L
oxalate
HI937521-01
HI93738-01
Chlorine Dioxide
0.00 to 2.00 mg/L
chlorophenol red
Chlorine, Free
0.00 to 2.50 mg/L
DPD
HI93701-01
Chlorine, Total
0.00 to 3.50 mg/L
DPD
HI93711-01
Chromium VI HR
0 to 1000 µg/L
diphenylcarbohydrazide
HI93723-01
• Outstanding measurement quality
Chromium VI LR
0 to 300 µg/L
diphenylcarbohydrazide
HI93749-01
• Compact, multiparameter meter
Color of Water
0 to 500 PCU
colorimetric platinum cobalt
—
• PC compatible
• 47 methods
The HI83099 is one of the most versatile photometers
on the market. In addition to COD, this meter measures
44 of the most important water quality parameters
using liquid or powder reagents. The amount of reagent
is precisely dosed to ensure maximum reproducibility.
The HI83099 bench photometer can be connected to
a PC via a USB cable. The optional HI92000 Windows®
Compatible Software helps users manage their data.
The HI83099 features a powerful interactive user
support to assist during each step of the analysis process.
A tutorial mode is also available in the setup menu.
Specifications
HI83099
Light Source
tungsten lamps with narrow band interference filters
Light Detector
silicon photocell
Ordering Info
HI83099 is supplied with glass cuvettes with caps (4),
cell protective cap, batteries, 12 VDC adapter, sample
preparation kit (for turbidity or concentrated samples),
cloth for wiping cuvettes, 60mL glass bottle for DO
analysis, scissors, and instructions.
Notes:
‡ Method with chromium-sulfuric acid is officially recognized by EPA for wastewater analysis.
◊ The HI93754F-25 and HI93754G-25 method follows the official method ISO 15705.
◊◊ This method is recommended for general purpose analysis with no chloride interference.
Copper HR
0.00 to 5.00 mg/L
bicinchoninate
HI93702-01
Copper LR
0 to 1000 µg/L
bicinchoninate
HI95747-01
Cyanuric Acid
0 to 80 mg/L
turbidimetric
HI93722-01
Fluoride
0.00 to 2.00 mg/L
SPADNS
HI93729-01
Hardness, Calcium
0.00 to 2.70 mg/L
calmagite
HI93720-01
Hardness, Magnesium
0.00 to 2.00 mg/L
EDTA
HI93719-01
Hydrazine
0 to 400 µg/L
p-dimethylaminobenzaldehyde
HI93704-01
Iodine
0.0 to 12.5 mg/L
DPD
HI93718-01
Iron HR
0.00 to 5.00 mg/L
phenantroline
HI93721-01
Iron LR
0 to 400 µg/L
TPTZ
HI93746-01
Magnesium
0 to 150 mg/L
calmagite
HI937520-01
Manganese HR
0.0 to 20.0 mg/L
periodate
HI93709-01
Manganese LR
0 to 300 µg/L
PAN
HI93748-01
Molybdenum
0.0 to 40.0 mg/L
mercaptoacetic acid
HI93730-01
Nickel HR
0.00 to 7.00 g/L
photometric
HI93726-01
Nickel LR
0.000 mg/L to 1.000 mg/L
PAN
HI93740-01
Nitrate
0.0 to 30.0 mg/L
cadmium reduction
HI93728-01
Nitrite HR
0 to 150 mg/L
ferrous sulfate
HI93708-01
Nitrite LR
0.00 to 1.15 mg/L
diazotization
HI93707-01
Oxygen, Dissolved (DO)
0.0 to 10.0 mg/L
Winkler
HI93732-01
Ozone
0.00 to 2.00 mg/L
DPD
HI93757-01
pH
6.5 to 8.5 pH
phenol red
HI93710-01
Phosphate HR
0.0 to 30.0 mg/L
amino acid
HI93717-01
Phosphate LR
0.00 to 2.50 mg/L
ascorbic acid
HI93713-01
Phosphorus
0.0 to 15.0 mg/L
amino acid
HI93706-01
Potassium HR
20 to 200 mg/L
turbidimetric tetraphenylborate HI93750-01
Potassium MR
10 to 100 mg/L
turbidimetric tetraphenylborate HI93750-01
Potassium LR
0.0 to 20.0 mg/L
turbidimetric tetraphenylborate HI93750-01
Silica
0.00 to 2.00 mg/L
heteropoly blue
HI93705-01
Silver
0.000 to 1.000 mg/L
PAN
HI93737-01
Sulfate
0 to 150 mg/L
turbidimetric
HI93751-01
Zinc
0.00 to 3.00 mg/L
zincon
HI93731-01
17
Oxygen, Chemical Oxygen Demand (COD)
HI83224
COD Meter and
Multiparameter
Photometer
with Bar Code Recognition of Sample
Vials
• Measures ammonia, chlorine, COD, nitrate, nitrogen and phosphorus
• Three operation modes: automatic, semi-automatic and manual
• Bar coded pre-dosed reagent vials
• On screen step-by-step tutorial
• Log up to 200 samples
• Context sensitive help screen
at the touch of a button
• USB connection
The HI83224 is a multiparameter benchtop
photometer that features 15 methods for
measurement of ammonia, COD, chlorine,
nitrate, nitrogen and phosphorus.
This meter features automatic recognition
of bar coded samples. The HI83224 scans
each vial inserted into the vial holder and
automatically identifies the sample method
and range. This feature eliminates errors
and simplifies the testing process.
The HI83224 also features a powerful interactive
user support system that assists users before,
during and after analysis. On-screen tutorials
guide users through set-up, calibration and
measurement procedures while context sensitive
help screens are available at a push of a button.
Bar code identification avoids vial confusion and wrong samples
Sample vials inserted into the HI83224 are identified using bar codes. The bar codes for different
methods are shown in the table below. For parameters that don’t use a bar coded reagents,
the vials supplied with the instrument should be used. The bar code has 4 digits. The first 2
digits are for parameter identification and the second 2 digits are for reagent lot ID.
HI83224 has a powerful interactive help system that assists the user during the analysis
process. At a touch of a button, users can get detailed help tailored to the current information
on the LCD. A tutorial mode is also available and can be accessed via the setup menu.
HI83224 uses a new series of pre-dosed
reagent vials for 13 of the 15 methods, each
bar coded with specific reagent information at
our factory. The chlorine method uses supplied
vials and powder packets. This information
is automatically scanned by the HI83224 to
assure that the vial and method are the same.
HI83224 can log and recall up to 200 individual
readings. Stored data includes parameter, test
results, sample number, lot number, instrument
id, date and time. For data management, the
HI83224 bench photometer can be connected
to a PC via the optional HI920013 USB cable and
HI 92000 Windows® compatible software.
Part Code
Test
Vial Bar Code
HI94764A-25
Ammonia LR
01xx
HI94764B-25
Ammonia HR
02xx
HI93701-01
Chlorine, Free
—
HI93711-01
Chlorine, Total
—
HI94766-50
Nitrate
05xx
HI94767A-50
Nitrogen, Total LR
16xx; 06xx
HI94767B-50
Nitrogen, Total HR
17xx; 07xx
HI94754A-25
Oxygen Demand, Chemical (COD) LR
12xx
Oxygen Demand, Chemical (COD) MR
13xx
Oxygen Demand, Chemical (COD) HR
24xx
• Bar code reader HI94754B-25
detects the
HI94754C-25
method and range HI94758A-50
automatically
Phosphorus, Reactive
30xx
HI94758B-50
Phosphorus, Acid Hydrolyzable
31xx
HI94758C-50
Phosphorus, Total
32xx
HI94763A-50
Phosphorus, Reactive HR
33xx
HI94763B-50
Phosphorus, Total HR
34xx
Note: xx represents the reagent lot code.
18
| Water and Wastewater Analysis Catalog
Oxygen, Chemical Oxygen Demand (COD)
Specifications
HI83224
Light Source
tungsten lamps with narrow band interference filters
Light Detector
silicon photocell
Ordering Info
HI83224 is supplied with sample vials (10), vial cleaning cloths (4),
scissors and instruction manual.
COD Test
Range
Resolution
Accuracy
Method
Reagent Code
COD LR
0 to 150 mg/L (as O₂)
0 to 150 mg/L
0 to 150 mg/L
1 mg/L
1 mg/L
1 mg/L
±5 mg/L or ±5 % of reading**
±5 mg/L or ±5% of reading**
±5 mg/L or ±5% of reading**
dichromate EPA‡
dichromate mercury-free◊◊
dichromate ISO◊
HI94754A-25 (25 tests)
HI94754D-25 (25 tests)
HI94754F-25 (25 tests)
COD MR
0 to 1500 mg/L (as O₂)
0 to 1500 mg/L
0 to 1500 mg/L
1 mg/L
1 mg/L
1 mg/L
±15 mg/L or ±4 % of reading**
±15 mg/L or ±4% of reading**
±15 mg/L or ±4% of reading**
dichromate EPA‡
dichromate mercury-free◊◊
dichromate ISO◊
HI94754B-25 (25 tests)
HI94754E-25 (25 tests)
HI94754G-25 (25 tests)
COD HR
0 to 15000 mg/L (as O₂)
10 mg/L
±150 mg/L or ±3 % of reading**
dichromate
HI94754C-25 (25 tests)
Test
Range
Resolution
Accuracy*
Method
Reagent Code
Ammonia LR
0.00 to 3.00 mg/L
(as NH₃—N)
0.01 mg/L
±0.10 mg/L or
±5 % of reading**
Nessler
HI94764A-25 (25 tests)
Ammonia HR
0 to 100 mg/L (as NH₃—N)
1 mg/L
±1 mg/L or
±5 % of reading**
Nessler
HI94764B-25 (25 tests)
Chlorine, Free
0.00 to 5.00 mg/L
0.01 mg/L below 0.99 mg/L;
0.1 mg/L above 0.99 mg/L
±0.03 mg/L
or ±4 % of reading**
DPD
HI93701-01 (100 tests)
HI93701-03 (300 tests)
Chlorine, Total
0.00 to 5.00 mg/L
0.01 mg/L below 0.99 mg/L;
0.1 mg/L above 0.99 mg/L
±0.03 mg/L or
±4 % of reading**
DPD
HI93711-01 (100 tests)
HI93711-03 (300 tests)
Nitrate
0.0 to 30.0 mg/L (as NO₃—N)
0.1 mg/L
±1.0 mg/L or
±5 % of reading @20°C
chromotropic acid
HI94766-50 (50 tests)
Nitrogen, Total LR
0.0 to 25.0 mg/L (as N)
0.1 mg/L
±1.0 mg/L or
±5 % of reading @20°C
chromotropic acid
HI94767A-50 (50 tests)
Nitrogen, Total HR
10 to 150 mg/L (as N)
1 mg/L
±3 mg/L or
±4 % of reading**
chromotropic acid
HI94767B-50 (50 tests)
Phosphorus,
Acid Hydrolyzable
0.00 to 1.60 mg/L (as P)
0.01 mg/L
±0.05 mg/L or
±5 % of reading**
ascorbic acid
HI94758B-50 (50 tests)
Phosphorus, Reactive
0.00 to 1.60 mg/L (as P)
0.01 mg/L
±0.05 mg/L or
±5 % of reading**
ascorbic acid
HI94758A-50 (50 tests)
Phosphorus, Reactive HR
0.0 to 32.6 mg/L (as P)
0.1 mg/L
±0.5 mg/L or
±5 % of reading**
vanadomolybdophosphoric acid
HI94763A-50 (50 tests)
Phosphorus, Total
0.00 to 1.15 mg/L (as P)
0.01 mg/L
±0.05 mg/L or
±6 % of reading**
ascorbic acid
HI94758C-50 (50 tests)
Phosphorus, Total HR
0.0 to 32.6 mg/L (as P)
0.1 mg/L
±0.5 mg/L or
±5 % of reading**
vanadomolybdophosphoric acid
HI94763B-50 (50 tests)
Accessories
HI839800
COD test Tube Heater
HI740217
Lab Safety Shield
HI740216
Test Tube Cooling Rack
The HI839800 COD reactor is constructed of durable materials.
The aluminum block incorporates a 25-vial capacity and a well for
a reference temperature probe.
For safety, the optional HI740217 safety shield and HI740216
test tube cooling rack for the HI839800 are strongly
recommended.
Some analytical methods require digestion of the
sample. For digestion of the vials, use the Hanna
HI839800 reactor only.
Notes:
‡ Method with chromium-sulfuric acid is officially recognized by EPA for wastewater analysis.
◊ The HI94754F-25 and HI94754G-25 method follows the official method ISO 15705.
◊◊ This method is recommended for general purpose analysis with no chloride interference.
* @ 25°C (77°F) unless otherwise stated
** Whichever is greater
19
Oxygen, Chemical Oxygen Demand (COD)
HI839800
COD Test Tube Heater
with 25 Vial Capacity
• Low temperature alert
·· Alerts the user that the temperature is below the set value
• High temperature alert
·· Alerts the user that the temperature is above the set value
• Countdown timer
·· Shows time remaining until the heating element shuts off
This COD reactor is an easy to use test tube heater. Its well-marked user
interface provides intuitive operation. The reactor is equipped with two
predefined temperature settings: 105ºC and 150ºC. COD and total phosphorus
digestions are conducted at 150ºC, and total nitrogen digestions are at
the 105ºC.
The HI839800 COD reactor is constructed of durable materials. The
aluminum block incorporates a 25 vial capacity and a well for a reference
temperature probe.
Outer casing stays cool to the touch!
Specifications
HI839800
Temperature of Reaction
105°C or 150°C (221°F or 302°F)
In addition, the HI839800 has 3 LEDs for visual indication. A green LED
indicates power, a blinking red LED warns the user of a hot heater block
(above 50ºC), and a yellow LED indicates heating.
Temperature Stability
±0.5°C (±0.9°F)
Temperature Range
-10°C to 160°C (14°F to 320°F)
Accuracy
±2°C (±3.6°F)
A three hour countdown timer is also incorporated to control timed
digestions. When the countdown timer expires, a beep will sound and the
heating element will turn off. The reactor contains a thermal fuse that
prevents overheating by turning off the heating element.
Capacity
25 vials (dia 16 x 100 mm), one receptacle for a stainless
steel reference thermometer
Warm-up Time
10-15 minutes, depending on selected temperature
Operating Mode
timed (0 to 180 minutes) or infinity mode
Block
aluminum
Ordering Info
HI839800 is supplied with power cable
and instructions.
Block temperature is continuously displayed on the LCD even when there
is no active temperature program running.
• Three measurement ranges to satisfy every need
·· As COD levels vary depending on the application and process measuring
points, Hanna offers reagents to cover three separate ranges. Simply choose the best range for the application:
Low range: 0 to 150 mg/L O₂
Medium range: 0 to 1500 mg/L O₂
High range: 0 to 15000 mg/L O₂
Certified COD Reagents
• Accurate and repeatable measurements
·· Hanna COD reagents have been developed in accordance with Standard
Methods 5220D, USEPA 410.4 and ISO 15705:2002 methods.
Hanna COD reagents are available in the following formats:
Range
Method
Reagent
Code
COD LR
0 to 150 mg/L
dichromate EPA‡
dichromate mercury-free◊◊
dichromate ISO◊
HI93754A-25
HI93754D-25
HI93754F-25
COD MR
0 to 1500 mg/L
dichromate EPA‡
dichromate mercury-free◊◊
dichromate ISO◊
HI93754B-25
HI93754E-25
HI93754G-25
COD HR
0 to 15000 mg/L
dichromate
HI93754C-25
COD Test
Each box of 25 vials is supplied with a Hanna certificate of quality.
The reagents are traceable to NIST SRM® 930.
20
| Water and Wastewater Analysis Catalog
• Pre-dosed vials
·· Hanna vials contain approximately 3 mL of pre-dosed reagent. The
operator just needs to add a small quantity of the sample.
Quick and accurate measurements
·· With pre-dosed vials, test preparation time is dramatically reduced.
There is no time-consuming reagent preparation procedure or
glassware cleaning.
• Safe reagents
·· Hanna COD reagents are safe for operators and the environment. Vials
and caps have been designed to avoid accidental reagent spills. Due
to the pre-dosed reagents, the amount of chemicals and handling time
is minimized.
Notes:
‡ Method with chromium-sulfuric acid is officially recognized by EPA for w
astewater analysis.
◊ The HI94754F-25 and HI94754G-25 method follows the official method ISO 15705.
◊◊ This method is recommended for general purpose analysis with no chloride interference.
pH
HI5221 • HI5222
Research Grade
Meters
pH/ORP/ISE and Temperature
• CAL Check™
• Five-point calibration
·· Five-point pH with preprogrammed and
custom buffers
·· Five-point ISE with preprogrammed
and custom standards (HI5222 only)
• Large log memory (100,000 records) with
selectable logging modes
• ISE incremental methods provided (HI5222)
• Multiple input channels (HI5222)
·· 2 channels for pH/ORP/ISE
• PC compatible via USB
• Capacitance touch keypad
Two Galvanically Isolated
pH/ORP/ISE Channels
Specifications
pH
mV
HI5221
HI5222
Range
-2.0 to 20.0 pH; -2.00 to 20.00; -2.000 to 20.000 pH
Resolution
0.1 pH; 0.01 pH; 0.001 pH
Accuracy
±0.1 pH; ±0.01 pH; ±0.002 pH ±1 LSD
Calibration
automatic, up to five point calibration, eight standard buffers available (1.68,
3.00, 4.01, 6.86, 7.01, 9.18, 10.01, 12.45), and five custom buffers
Temperature
Compensation
automatic or manual from -20.0 to 120.0°C/-4.0 to 248.0°/253.15 to 393.15K
Range
±2000 mV
Resolution
0.1 mV
Accuracy
±0.2 mV ±1 LSD
ISE
Range
-20.0 to 120°C; -4.0 to 248.0°F; 253.15 to 393.15K
Resolution
0.1°C; 0.1°F; 0.1K
Accuracy
±0.2°C; ±0.4°F; ±0.2K
Range
—
5•10-⁷ to 5•10⁷ concentration
Resolution
—
1; 0.1; 0.01; 0.001 concentration
Accuracy
—
±0.5% (monovalent ions);
±1% (divalent ions)
Calibration
—
automatic, up to five-point calibration,
five fixed standard solutions available
for each measurement unit, and five
user defined standards
Additional
Specifications
Input Channel(s)
Ordering Info
HI5221 and HI5222 are supplied with HI1131B pH electrode, HI7662-T temperature probe, HI76404W
electrode holder, HI70004 pH 4.01 buffer solution sachet (2), HI70007 pH 7.01 buffer solution sachet
(2), HI700601 electrode cleaning solution sachet (2), HI7082 3.5M KCl electrolyte solution (30 mL),
capillary dropper pipette, 12 VDC adapter, quality certificates, quick start guide and instruction manual.
1 pH/ORP
CAL Check™
Hanna’s exclusive CAL Check™ diagnostics
system ensures accurate pH readings every
time by alerting users to potential problems
during the calibration process. The CAL Check™
system eliminates erroneous readings due to
dirty or faulty pH electrodes or contaminated
pH buffer solutions during calibration.
Data Logging
Relative mV Offset Range ±2000 mV
Temperature*
HI5221 and HI5222 are research grade pH, mV
and temperature benchtop meters. HI5222 is a
dual channel meter with two independent inputs
for pH, ORP and ISE probes. Each channel has it’s
own temperature input and supports half-cells
with a separate reference electrode input.
2 pH/ORP/ISE
Three selectable logging modes are available:
automatic, manual and AutoHold logging.
Automatic and manual logs up to 100 lots,
50,000 records max/lot; 100,000 data points
per channel, and up to 100 ISE methods reports
(HI5222 only). GLP information is stored with
each lot recorded. Data can be transferred to a
PC via USB and HI92000 software (optional).
ISE
HI5222
is compatible
with ion selective
electrodes
Code
Parameter
Page
HI4101
Ammonia
4
HI4107
Chloride
4
HI4109
Cyanide
10
HI4110
Fluoride
10
HI4113
Nitrate
12
HI4115
Silver/Sulfide
25
(*) Reduced to actual probe limits
21
pH
pH
The secondary standard guidelines
for water systems set by the EPA
states pH should be maintained
between 6.5 and 8.5 to control
corrosion and avoid aesthetic or
cosmetic concerns. pH is considered
a critical variable for determining
treatment options in public
water systems operation. Many
factors affect pH measurements.
Temperature measurement
and correction and the number
of calibrated pH standards will
improve the quality of the pH
measurement. The pH probe
together with instrumentation
should be calibrated at multiple
calibration points in standardized
buffer solution prior to analysis.
HI3220 • HI3222
pH Benchtop Meters
ORP
pH/mV/ISE and Temperature
• CAL Check™
·· Alerts users of calibration status
ISE
• GLP features
• Logging
·· Stability, interval and log-on-demand
HI3222
is compatible
with ion selective
electrodes
• PC connectivity via opto-isolatedUSB
• One (HI3220) or two (HI3222) input channels
Specifications
pH
mV
Temperature*
ISE
Ordering Info
22
HI3220
Code
Parameter
Page
HI4101
Ammonia
4
HI4107
Chloride
4
HI4109
Cyanide
10
HI4110
Fluoride
10
HI4113
Nitrate
12
HI4115
Silver/Sulfide
25
HI3222
Range
-2.0 to 20.0 pH; -2.00 to 20.00 pH; -2.000 to 20.000 pH
Resolution
0.1 pH; 0.01 pH; 0.001 pH
Accuracy
±0.01 pH; ±0.002 pH
Calibration
up to five-point calibration, seven standard buffers available (1.68,
4.01, 6.86, 7.01, 9.18, 10.01, 12.45), and five custom buffers
Temperature
Compensation
manual or automatic from -20.0 to 120.0°C (-4.0 to 248.0°F)
Range
±2000 mV
Resolution
0.1 mV
Accuracy
±0.2 mV
Rel mV Offset Range
±2000 mV
Range
-20.0 to 120.0°C (-4.0 to 248.0°F)
ORP measurements are based
on the potential difference
measured between the platinum
or gold electrode and a reference
electrode. The identical reference
system utilized for the pH
electrode (Ag/AgCl) is also used
for redox measurements.
Redox electrodes are used
to monitor many chemical
processes particularly those
involving reversible reactions.
Industrial Wastewater
Treatment
Resolution
0.1°C (0.1°F)
Accuracy
±0.2°C (±0.4°F) (excluding probe error)
Range
—
1•10-⁷ to 9.99•10¹⁰ concentration
(choice of units)
Resolution
—
3 digits
Accuracy
—
±0.5% of reading (monovalent ions),
±1% of reading (divalent ions)
Calibration
—
up to five-point calibration, six standard
solutions (in units selected)
The redox systems used in water
treatment are the reduction
of chromates and oxidation of
cyanides. Waste hexavalent
chromium is reduced to trivalent
chromium by the addition of
sodium bisulfite or sulfur dioxide.
In the case of cyanide, chlorine
or sodium hypochlorite is used
to oxidize the cyanide, followed
by the hydrolysis of cyanogen
chloride to form cyanate.
HI3220 and HI3222 are supplied with HI1131B pH electrode, HI7662-T temperature probe, HI76404N electrode
holder, HI70004 pH 4.01 buffer solution sachet, HI70007 pH 7.01 buffer solution sachet, HI700601 electrode
cleaning solution sachet (2), HI7082 3.5M KCl electrolyte solution (30 mL), 12 VDC adapterand instructions.
| Water and Wastewater Analysis Catalog
(*) Reduced to
actual sensor limits
pH
HI98190 • HI98191
Professional
Waterproof Meters
pH/ORP and pH/ORP/ISE
• Waterproof
·· IP67 rated waterproof, rugged enclosure
• ISE measurement units (HI98191 only)
·· Extensive choice of units to display readings
(ppm, ppt, g/L, µg/L, mg/L, M, mol/L, mmol/L,
%, w/v, user)
• CAL Check™
·· Alerts users to problems during calibration
including dirty/broken electrode, contaminated
buffer and overall probe condition
Quick connect probe
for HI98190
The HI98190 features
probes with a quick connect
DIN connector to make
attaching and removing the
probe simple and easy.
• Automatic or manual temperature
compensation
• Calibration
·· Up to a five-point calibration with seven
standard buffers and five custom buffers
available
See p.49 for all HI98190
compatible probes
Specifications
pH
• AutoHold
·· Automatically holds the first stable reading
on the display
HI98190
HI98191
Range
-2.0 to 20.0 pH; -2.00 to 20.00 pH; -2.000 to 20.000 pH
Resolution
0.1 pH; 0.01 pH; 0.001 pH
Accuracy
±0.1 pH; ±0.01 pH; ±0.002 pH
Calibration
up to five-point calibration, seven standard buffers available (1.68, 4.01, 6.86,
7.01, 9.18, 10.01, 12.45) and five custom buffers
Temperature
automatic or manual from -20.0 to 120.0°C (-4.0 to 248.0°F)
Compensation
mV
ISE
(HI98191 only)
Temperature
Additional
Specifications
Ordering Info
Range
±2000 mV
Resolution
0.1 mV
Accuracy
±0.2 mV
Relative mV
Offset Range
±2000 mV
Range
—
from 1•10-⁷ to 9.99•10¹⁰ concentration
Resolution
—
3 digits 0.01; 0.1; 1; 10 concentration
Accuracy
—
±0.5% of reading (monovalent ions),
±1% of reading (divalent ions)
Calibration
—
up to five-point calibration, seven
standard solutions available
• Log-on-demand
·· Store measurement data at the press
of a button
• Calibration timeout
·· Alerts when calibration is due at a
specified interval
• GLP
·· GLP data provides data from previous
calibration to ensure Good Laboratory
Practices are met
• Connectivity
·· PC connectivity via opto-isolated micro-USB
with HI92000 software
Range
-20.0 to 120.0 °C (-4.0 to 248.0°F)
Resolution
0.1°C (0.1°F)
Accuracy
±0.4°C (±0.8°F) (excluding probe error)
pH Probe
HI12963 titanium body, pH electrode with
internal temperature sensor, quick DIN
connector and 1 m (3.3’ cable)
HI72911B titanium body, pH electrode
with internal temperature sensor, BNC
connector and 1 m (3.3’ cable)
Log-ondemand
200 samples
(100 each pH/mV range)
300 samples
(100 each pH/mV/ISE range)
• Approximately 200 hour battery life
• Powered by (4) 1.5V AA batteries
For Universal Applications
HI98190 and HI98191 are IP67 rated waterproof
meters designed for universal applications.
HI98190 measures pH/ORP and temperature
while HI98191 also includes ISE measurements.
Exchange out the pH probe for an ORP
probe to obtain mV readings in the
±2000 mV range. HI98191 adds direct
ion concentration readings for ISEs with a
choice of units for calibration and display.
HI98190 and HI98191 are supplied with HI12963 pH electrode (HI98190), HI72911B pH
electrode (HI98191), HI7662 temperature probe for use with ISEs (HI98191), HI7004M pH 4.01
buffer solution (230 mL), HI7007M pH 7.01 buffer solution (230 mL), electrode general cleaning
solution sachet (2), 100 mL plastic beaker (2), HI92000 PC software, HI920015 micro USB cable,
1.5V AA batteries (4), instruction manual, quick start guide, quality certificate, and rugged carrying
case with custom insert.
23
pH / Phenols / Phosphate
HI98127 (pHep®4)
HI98128 (pHep®5)
HI38058
pH and Temperature
Testers
pH Test Kit
• Waterproof and designed to float
• Replaceable pH electrode cartridge
• Automatic calibration
• Automatic Temperature Compensation
• HOLD button to freeze readings on the display
• Stability indicator
Specifications
pH
Temperature
Ordering
Info
HI98127 (pHep®4)
HI98128 (pHep®5)
Range
-2.0 to 16.0 pH
-2.00 to 16.00 pH
Resolution
0.1 pH
0.01 pH
Accuracy
±0.1 pH
±0.05 pH
pH
Calibration
automatic, one or two-point with two sets of standard
buffers (pH 4.01 / 7.01 / 10.01 or pH 4.01 / 6.86 / 9.18)
Range
-5.0 to 60.0°C / 23.0 to 140.0°F
Resolution
0.1°C / 0.1°F
0.1°C / 0.1°F
Accuracy
±0.5°C /±1°F
±0.5°C /±1°F
HI98127 (pHep®4) and HI98128 (pHep®5) are supplied with
HI73127 pH electrode, HI73128 electrode removal tool, batteries
and instructions.
Phenols are widely used in
pharmaceuticals, dyes and
indicators, and as general
disinfectants. They may occur
in household and industrial
wastewaters and in natural waters;
they can also enter potable water
supplies and chlorination of such
waters results in malodorous
chlorophenol products that are
detectable from 0.001 mg/L (1 ppb).
Phosphate
• BEPS (Battery Error Prevention System)
The pHep®4 and pHep®5 testers are for users
that require the greatest accuracy while
staying economical. The pHep®4 has a 0.1 pH
resolution and pHep®5 reads up to 0.01 pH.
Phenols
Specifications
Method
Checker Disc
Range
4.0-10.0 pH
Smallest
Increment
0.5 pH
Chemical
Method
modified Winkler
# Tests
100
Ordering
Info
HI38058 test kit comes
with 30 mL pH 4.0-10.0
reagent, checker disc,
glass vials with caps (2)
and 3 mL plastic pipette.
HI 3864
Phenols Test Kit
Phosphates are present in a
number of products that are
used everyday. Some examples
of the effects of phosphates are
enhancing the flavor and tartness
of cola drinks, as a buffering agent
in controlling pH in antifreeze and
delaying darkening of cut potatoes
used in making French fries.
Phosphates are also extensively
used in detergents and
cleaning fluids because of
their ability to soften water
and remove soil deposits.
The largest use of phosphates
is in the conversion of the
mineral apatite, which is a
mixture of calcium phosphate
and other calcium compounds
that are used in fertilizers.
HI96713C
Phosphates are particularly
important for the growth and
development of plant roots, and
hence are one of the most common
fertilizers used in agriculture.
• CAL Check™
However, high concentrations of
phosphates in agricultural runoff
can cause environmental pollution,
as they are a primary cause of
eutrophication. Local laws govern
the use of phosphates and the
discharge levels into streams.
Phosphate Portable
Photometer
• BEPS (Battery Error
Prevention System)
• GLP Features
Specifications
Specifications
HI96713C Phosphate LR
Range
0.00 to 2.50 mg/L (ppm)
Resolution
0.01 mg/L
Accuracy
@ 25°C (77°F)
±0.04 mg/L ±4% of reading
Ordering Info
HI96713C is supplied with CAL Check™ standards, sample cuvettes (2)
with caps, 9V battery, scissors, cuvette wiping cloth, instrument quality
certificate, instruction manual and rigid carrying case.
Method
Checker Disc
Range
0.00-1.00 mg/L (ppm)
0.5-5.0 mg/L (ppm)
Smallest
Increment
0.02 mg/L
0.1 mg/L
Chemical
Method
aminoantipyrine
# Tests
100
Ordering
Info
HI3864 test kit comes
with 100 packets
reagent A, 100 packets
reagent B, checker discs
(2), glass vials with caps
(2) and mirror.
Reagents sold separately
Reagents and
Standards
24
HI96713-11
CAL Check™ standard cuvettes
HI93713-01
reagents for 100 tests
HI93713-03
reagents for 300 tests
| Water and Wastewater Analysis Catalog
Phosphates are also utilized in
detergents and are needed, in small
quantities, for heating systems.
For these reasons, it is necessary
to closely monitor the phosphate
levels present in both municipal
and industrial wastewater.
Sulfate / Sulfide / Zinc
Sulfate is widely present within
natural waters in different
concentrations. Sulfates are to be
kept within a strict range for drinking
water, especially since this value can
be high near mine drainage points.
Zinc
Zinc is widely used in alloys (brass,
bronze, and dye-casting alloys),
in galvanizing iron and other
metals, and also as a fungicide.
It is also an essential growth
element in human diet. But with
concentrations higher than 5 mg/L,
it gives a bitter taste to water and
opalescence to alkaline water.
Zinc can enter the domestic
water supply from the
deterioration of galvanized iron
and dezincification of brass.
HI96751C
HI4115
Sulfate Portable
Photometer
Silver/Sulfide
Ion Selective
Electrode
• CAL Check™
ISE
• BEPS (Battery Error
Prevention System)
For use with
compatible ISE
meters
• GLP Features
The HI96751 measures the sulfate
content in water samples in the
0 to 150 mg/L (ppm) range.
120 mm
Sulfate
012 mm
Specifications
Measurement
Range
Ag+ 1.0M to 1•10-⁶M
107900 to 0.11ppm
S²- 1.0M to 1•10-⁷M
32100 to 0.003 ppm
Optimum pH Range
Ag+ 2 to 8
S²- 12 to 14
Specifications
HI96751C Sulfate
Range
0 to 150 mg/L (ppm)
Resolution
1 mg/L
Temperature Range
0 to 80°C
Accuracy @ 25°C (77°F)
±1 mg/L ±5% of reading
Approximate Slope
+56 Ag+ / -28 S²-
HI96751C is supplied with CAL Check™ standards, sample
cuvettes (2) with caps, 9V battery, scissors, cuvette wiping
cloth, instrument quality certificate, instruction manual and
rigid carrying case.
Body O.D.
12 mm
Ordering
Info
Insertion Length
120 mm
Body Material
PEI
Ordering
Info
HI4115 solid-state;
combination ISE
with 1m coaxial
cable and BNC
connection
Reagents sold separately
Reagents and
Standards
HI96751-11
CAL Check™ standard cuvettes
HI93751-01
reagents for 100 tests
HI93751-03
reagents for 300 tests
About Our
Combination
Ion Specific
Electrodes
HI96731C
Zinc Portable
Photometer
• CAL Check™
• BEPS (Battery Error
Prevention System)
• GLP Features
The HI96731 measures the zinc content
in water and wastewater in the 0.00 to
3.00 mg/L (ppm) range.
Specifications
HI96731C Zinc
Range
0.00 to 3.00 mg/L (ppm)
Resolution
0.01 mg/L
Accuracy @ 25°C (77°F)
±0.03 mg/L ±3% of reading
Ordering
Info
HI96731C is supplied with CAL Check™ standards, sample
cuvettes (2) with caps, 9V battery, scissors, cuvette wiping
cloth, instrument quality certificate, instruction manual and
rigid carrying case.
Combination electrodes
include a sensor and
reference electrode in a
single electrode body. Our
combination ion selective
electrodes provide the same
selectivity and response as
our ISE half cells, but include
our superior double junction
reference into the same
electrode body. Combination
solid state electrodes
have a built-in solid state
sensor and quick refillable
reference electrode.
CAL Check™ standards and testing reagents sold separately
Reagents and
Standards
HI96731-11
CAL Check™ standard cuvettes
HI93731-01
reagents for 100 tests
HI93731-03
reagents for 300 tests
Gas sensing
combination tip
Solid-state
combination tip
25
Temperature
HI93510N
Thermistor Thermometers
• HOLD Key to freeze readings on display
• BEPS (Battery Error Prevention System)
• Battery level indicator at startup
HI147
Checkfridge™
Remote Sensor
Thermometer
• Backlit display
• CAL Check™ verification at 0ºC
• Waterproof
• BEPS (Battery Error Prevention System)
• User calibration
• Magnetic backing
The HI93510N is a waterproof thermometer tailored for the
lab and field. The LCD displays the highest and lowest readings
in the cycle along with the current temperature.
• Stainless steel thermistor probe
on 1m (3.3’) cable
The HI93510N offers a CAL button to allow the operator to
calibrate the meter and probe in an ice bath at 0°C.
Specifications
HI93510N
Range
-50.0 to 150.0°C; -58.0 to 302.0°F
Resolution
0.1°C; 0.1°F (-58.0 to 230.0°F) and 0.2°F (outside)
Accuracy
±0.4°C; ±0.8°F (for 1 year, excluding probe error)
Ordering
Info
HI93510 and HI93510N are supplied with HI762BL temperature probe, batteries
and instructions.
HI762L
air/liquid, stainless steel thermistor temperature probe with white handle
and 1 m (3.3’) cable
HI762A
air/gas, stainless steel thermistor temperature probe with white handle
and 1 m (3.3’) cable
Probes
HI98501 Checktemp®
Digital Thermometer
with Stainless Steel Penetration Probe
• Large display
·· The large display features a wide temperature range
and optimal viewing angle
• CAL Check™
·· Automatically verifies calibration at startup and alerts
the user of the calibration status
• IP65 water resistant protection
• AISI 316 stainless steel penetration probe
• C and °F measurement
The Checktemp® delivers high accuracy temperature measurements
over a wide range without concern for breakage or condensation.
Specifications
°C
°F
Range
-50.0 to 150.0°C
-58.0 to 302°F
Resolution
0.1°C (-50.0 to 150.0°C)
0.1°F (-58.0 to 199.9°F);
1°F (above 200°F)
Accuracy
±0.2°C (-30 to 120°C)
±0.3°C (outside: -50.0 to -30.0°C
and 120.0 to 150.0°C)
±0.5°F (-22 to 199.9°F)
±1°F (outside: -58.0 to -22.0°F
and 200 to 302°F)
Ordering
Info
HI98501 (Checktemp®) is supplied with penetration probe, protective cap, battery
and instructions.
26
| Water and Wastewater Analysis Catalog
Few manufacturers have given any thought to
providing the user a convenient means to monitor
internal temperature conditions of a refrigerator,
freezer or incubator from the outside.
Water testing laboratories require constant
monitoring of refrigerators and incubators for
compliance to standard operations. The Hanna
HI147 Checkfridge™ is the ideal thermometer for
accurate, reliable internal temperature readings.
How do you know when the reading on the
thermometer is correct? An ice point or slurry
could be made. Even then there could be
several degrees difference between the real
and theoretical temperatures. With the HI147,
there is no need to waste time preparing and
ice bath for making these tests; its unique CAL
Check™ feature can simulate it. Conveniently
located on the face of the thermometer is a
TEST switch. Engage the switch and the HI147
performs an internal CAL Check™. In only a few
seconds, you see the results on the large LCD.
Return the switch to the READ position and the
HI147 returns to its normal measuring status.
Specifications
HI147-00 Checkfridge™ C
Range
-50.0 to 150.0°C
Resolution
0.1°C
Accuracy
±0.3°C (-20 to 90°C);
±0.5°C (outside)
Ordering
Info
HI147-00 (Checkfridge™ C)
is supplied with battery and
instructions.
Autosampler
HI921
Autosampler
Automate up to 18 samples
The HI921 Autosampler is an automated titration sample handling system
designed for use with the HI902C Potentiometric Titration System. This
high quality system makes the titration of multiple samples quick and easy.
The HI921 can utilize up to three peristaltic pumps for automatic
reagent addition, sample leveling and waste aspiration and one
membrane pump for spray rinsing. An included control panel allows for
manual operation of the motors and pumps. The HI921 also features
a built-in magnetic stirrer, electrode rinse feature, USB interface
with compatible barcode reader and built-in RFID for each tray.
With the Autosampler, up to 18 samples can be run consecutively. The
HI921 Autosampler interfaces directly with the HI902C to access titration
methods. Once a method is established, the user can then customize
the automation sequence for their samples. Sample names and size can
be customized or auto-filled with preset values. Once the Autosampler
sequence is complete, two reports are available for review: a sequence
report with a table outlining each sample name, beaker position,
sample size and result for the tray, and a detailed titration report for
each individual sample, including the graph of the titration data.
Specifications
HI921
• Flexible, accurate detection of the titration endpoint with
HI902C potentiometric titrator
3 x 12-mm electrodes
1 temperature sensor
Electrode Holder Slots
1 aspiration tube
5 multi - purpose slots (titrant/reagent tubes)
1 overhead stirrer
Temperature Sensor
• Absolute encoder in sample tray
·· The Autosampler always knows the tray position without
the need to "home" or calibrate
HI7662-A (included)
built-in magnetic stirrer
Stirrers
overhead propeller stirrer (optional)
up to 3 can be installed
Peristaltic Pumps
installs in slots #1, 2, 3
Membrane Pump (for
cleaning)
16 beakers x 150 mL (HI920-11660)
18 beakers x 100 mL (HI920-11853)
built-in RFID, transmits the tray type and serial number to
Autosampler
ASTM short-form glass beakers
Beakers
HI920-060 (150 mL), fits HI920-11660 tray - 16 plastic beakers
HI920-053 (100 mL), fits HI920-11853 tray - 18 plastic beakers
buttons for manual operation of tray and titration head
Control Panel
manual operation of peristaltic or membrane pumps
2-line backlit display with status information
Barcode Reader
compatible with USB barcode readers, used to add sample names
Report Storage
up to 40 trays of samples (e.g.: 720 reports for 18-beaker tray)
x=
Ordering Info
Choose your Autosampler configuration:
HI921 —
x
y
y=
z
z=
• Electrode rinse feature
·· Up to 3 beakers per tray can be designated for electrode dip/spray rinses
• Automatic addition of reagents or deionized water to the sample beaker
by peristaltic pump
installs in slot #4
Trays
• Automation of up to 18 samples per tray
·· 16 sample tray holds 150 mL beakers
·· 18 sample tray holds 100 mL beakers
1
16 sample tray
2
18 sample tray
0
no peristaltic pump
1
one peristaltic pump
2
two peristaltic pumps
3
three peristaltic pumps
0
no membrane pump
1
one membrane pump
• Included control panel for manual operation of motors and pumps
• Built-in magnetic stirrer or optional overhead propeller stirrer
• Barcode reader interface for easy sample tracking
• Built-in RFID in each tray, communicating tray serial number and type
• Optical IR beam detects presence or absence of beakers in the tray
·· Ensures the Autosampler does not proceed with titration
if a beaker is missing
• Field upgradable software
• Sample trays made of chemically-resistant materials are removable,
easy to clean and dishwasher safe
• Electrode holder can accommodate 3 x 12 mm electrodes, temperature
sensor, 1 aspiration tube and 5 multipurpose tubes (reagent addition,
burette dosing)
• Real-time progress of the sequence and results shown on the
HI902 titrator screen
• Optional integrated peristaltic (up to 3) or membrane pumps
• Sample leveling feature
·· Automatic leveling for fast preparation of volumetric samples
• Waste removal feature
·· Aspirate completed samples into a waste container
27
Titration
HI902C
Automatic Titration
System
• Linear and dynamic dosing
ISE
• USB port allows for the transfer of methods
and reports to a PC or another titrator via USB flash drive
Compatible
with ISE
Electrodes
• One or two sensor input models
• RS232 port for connection to an analytical laboratory balance
• VGA port for external monitor
• Multi-language support
Four working modes:
• Potentiometric titrator
·· Choice of endpoint detection: equivalence point
(1st or 2nd derivative) or fixed pH/mV value
·· Clip-Lock™ exchangeable burette system
enables users to exchange burettes in a
matter of seconds
·· Acid-base, non-aqueous, redox, complexometric,
precipitation, non-aqueous and
argentometric titrations can be performed
·· Supports up to 100 titration methods
(standard and user-defined)
·· Supplied with a standard methods pack or
customizable user methods
·· Titration graph can be displayed on-screen
and saved as a bitmap
·· Reminders for titrant age and
standardization expiration
·· Multiple equivalence endpoint titrations with
multiple molecular weights and reaction ratios
·· Supports two burette dosing pumps with the
ability to perform back titrations
·· 5, 10, or 25 mL precision ground glass syringe
with PTFE plunger
·· 40,000 step screw drive, piston dosing pump
·· 3-way motor driven valve
·· PTFE burette tubing with polyurethane
tube jacketing
• Full featured research grade pH meter
·· Automatic Temperature Compensation (ATC)
·· Up to five calibration points with automatic
recognition of standard buffers and up to
five custom buffers
• mV (ORP) meter
·· Relative mV calibration
• ISE meter
·· Numerous concentration units including:
mol/L, mmol/L, mg/L, mg/mL, µg/L, %, ppt,
ppm, g/L and user-defined
·· Up to five calibration points with five
custom standards
28
The HI902C can measure these crucial wastewater parameters:
• Alkalinity
• Volatile acidity
• Hardness
·· Calcium
·· Magnesium
·· Total
Powerful Customization,
Accurate Analysis
The HI902C is an automatic titrator that
complements our wide range of products
dedicated to quick and accurate laboratory
analysis. HI902C can perform acid-base, redox,
complexometric, precipitation, non-aqueous
and argentometric titrations.
The HI902C dispenses the titrant,
detects the endpoint and performs all
necessary calculations automatically.
This versatile titrator supports up to 100 standard
or user-defined methods. When powered on, the
instrument initiates an internal diagnostics check
and then readies itself for the first titration of
the day. A large color LCD screen clearly shows
the chosen method and related information. A
real-time titration curve can be shown on the
| Water and Wastewater Analysis Catalog
• Chloride
• TKN
(Total Kjehldahl Nitrogen)
display; this feature is useful when new methods
are tested or when a procedure needs to be
optimized. At the end of the titration, the data
is automatically stored and can be transferred
to a flash drive or PC by USB connection.
This titrator is supplied with a pack of
standard methods or you can create your
own. Methods (standard or user) can be
transferred between titratorsusing a USB
flash drive. Software updates can also be
performed using a USB flash drive as well.
Users can connect pH, ORP or ISE electrodes to the
HI902C, as well as create a complete workstation
with a PC, monitor, keyboard and printer.
The HI902C complies with GLP requirements. All
GLP information from each sample can be stored,
including ID number, date and time of analysis,
electrode ID code, and last calibration date.
Titration
Specifications
pH
mV
ISE
Temperature
HI902C
Range
-2.0 to 20.0 pH; -2.00 to 20.00 pH; -2.000 to 20.000 pH
Resolution
0.1; 0.01; 0.001 pH
Accuracy (@25°C/77°F)
±0.001 pH
Calibration
up to five-point calibration, eight standard buffers and five custom buffers
Range
-2000.0 to 2000.0 mV
Resolution
0.1 mV
Accuracy (@25°C/77°F)
±0.1 mV
Calibration
single point offset
Range
1•10-⁶ to 9.99•10¹⁰
Resolution
1; 0.1; 0.01
Accuracy (@25°C/77°F)
±0.5% monovalent; ±1% divalent
Calibration
up to five-point calibration, seven standard solutions and five user-defined standards
Range
-5.0 to 105.0°C; 23.0 to 221.0°F; 268.2 to 378.2 K
Resolution
0.1°C; 0.1°F; 0.1K
Accuracy (@25°C/77°F)
±0.1°C; ±0.2°F; ±0.1K, excluding probe error
Burette Sizes
5, 10, 25 and 50 mL
Burette Resolution
1/40000
Display Resolution
0.001 mL
Dosing Accuracy
±0.1% of full burette volume
Display
5.7” (320 x 240 pixel) backlit color LCD
Languages
English, Portuguese, Spanish
Methods
load up to 100 methods (standard and user-defined)
With Clip-Lock™, it only takes a few
seconds to exchange the reagent burettes
to perform a different titration.
Burette Auto-Detection burette size is automatically recognized when inserted into the unit
Other
Specifications
Clip-Lock™ Exchangeable
Burette System
Programmable Stirrer
overhead propeller type, 100-2500 RPM, resolution 100 rpm
Flow Rate
user-selectable from 0.1 mL/min to 2 x burette volume/min
Temperature
Compensation
manual (MTC) or automatic (ATC)
Endpoint Determination equivalence point (1st or 2nd derivative) or fixed pH/mV value
Potentiometric
Titrations
acid-base, redox, precipitation, complexometric, non-aqueous, argentometric
Measurement Units
user-specified expression of concentration units to suit specific
calculation requirements
Real Time &
Stored Graphs
mV-volume or pH-volume titration curve, 1st derivative curve or 2nd derivative curve
pH mode, mV mode or ISE mode: pH/mV/concentration versus time
Data Storage
up to 100 titration and pH/mV/ISE reports
USB Host (Side)
flash drive compatibility for transfers of methods and reports
Peripherals (Rear)
connections for VGA display, PC-keyboard, parallel printer, USB device input,
RS232, interface for autosampler
GLP Conformity
instrumentation data storage and printing capabilities
The Clip-Lock™ exchangeable burette system
prevents cross contamination while reducing
loss of time and reagents. Simply slide out the
burettes and detach the dispensing tubes from
the overhead assembly for quick exchange.
Having several prepared burettes on hand will
make the Hanna HI902C one of the fastest and
most versatile titration systems on the market.
HI902C1: titrator with one analog board, overhead propeller stirrer with stand, 25 mL glass burette, dosing
pump drive, temperature sensor, USB cable, 256 Mb USB flash drive and PC software.
Ordering
Info
HI902C2: titrator with two analog boards, overhead propeller stirrer with stand, 25 mL glass burette,
dosing pump, temperature sensor, USB cable, 256 Mb USB flash drive and PC software.
• Fully customizable titration methods
Accessories
Code
Description
HI900100
dosing pump
HI900260
3-way valve (includes 3 gaskets
and 2 screws)
HI900150
50 mL burette assembly (includes syringe,
aspiration, and dispensing tubes)
HI900270
aspiration tube with fitting (includes blue
protection tube, gasket, and tube lock)
HI900125
25 mL burette assembly (includes syringe,
aspiration, and dispensing tubes)
HI900280
dispensing tube with fitting (includes
standard dispensing tip, blue protection
tube, gasket, and tube lock)
HI900110
10 mL burette assembly (includes syringe,
aspiration, and dispensing tubes)
HI900301
overhead stirrer assembly (includes
overhead stirrer and 3 propellers)
HI900105
5 mL burette assembly (includes syringe,
aspiration, and dispensing tubes)
HI900302
replacement propellers (3)
HI900250
50 mL burette syringe
HI900303
PVDF replacement propellers (3)
for organic solvents
HI900225
25 mL burette syringe
HI900310
overhead electrode holder (includes overhead
stirrer without electronics or propeller)
HI900210
10 mL burette syringe
HI900320
stirrer stand
HI900205
5 mL burette syringe
• Support for 2 electrodes, 2 burette dosing pumps and 2 stirrers
29
Turbidity
Turbidity
Turbidity of water is an optical property that causes light to be scattered and
absorbed, rather than transmitted. The scattering of the light that passes
through a liquid is primarily caused by the suspended solids. The higher the
turbidity, the greater the amount of scattered light. Even a very pure fluid
will scatter light to a certain degree, no solution will have zero turbidity.
There are different measurement standards used based on applications,
and with these standards are applied units. The ISO standard adopted
the FNU (Formazin Nephelometric Unit) while the EPA uses the NTU
(Nephelometric Turbidity Unit). Other units include the JTU (Jackson
Turbidity Unit), FTU (Formazin Turbidity Unit), EBC (European Brewery
Convention Turbidity Unit) and diatomaceous earth (mg/L SiO₂).
JTU
FTU (NTU/FNU)
SiO 2 (mg/L)
JTU
FTU (NTU/FNU)
SiO (mg/L)
1
19
2.5
0.053
1
0.13
0.4
7.5
1
2
Treatment Process of Drinking Water
Purification of Drinking Water
Turbidity is one of the most important parameters used to determine
the quality of drinking water. Public water suppliers are required to treat
their water to remove turbidity. In the United States, for systems that use
conventional or direct filtration methods, turbidity cannot be higher than
1.0 nephelometric turbidity units (NTU) at the plant outlet, and all samples
for turbidity must be less than or equal to 0.3 NTU for at least 95 percent
of the samples in any month. Adequately treated surface water does
not usually present a turbidity problem. The World Health Organization
indicates 5 NTU as the reference turbidity value of water for trade. This
value has been established based on the aesthetic characteristics of
water. From a hygienic point of view, 1 NTU is the recommended value.
Many drinking water utilities strive to achieve levels as low as 0.1 NTU.
Turbidity is an indicator and will not give results for a specific
pollutant. It will, however, provide information on the degree of overall
contamination. The flow chart for the water treatment process of
drinking water shows the turbidity reference values for each phase.
Monitoring for Natural Water Supplies
In natural water, turbidity measurements are taken to gauge
general water quality and its compatibility in applications where
there are aquatic organisms. It has been found that there is a
strong correlation between the turbidity level and the BOD value. Moreover,
by definition, turbidity obstructs light, thus reducing
the growth of marine plants, eggs and larvae, which are usually
found in the lower levels of an aquatic ecosystem.
Wastewater Treatment and Turbidity
Historically, turbidity is one of the main parameters monitored in wastewater.
In fact, the monitoring and treatment process was once solely based on the
control of turbidity. Currently, the measurement of turbidity at the end of
the wastewater treatment process is necessary to verify that the values
are within regulatory standards. Generally speaking, the turbidity value has
to be between 0 and 50 FTU, with an accuracy of ±3 FTU, depending on the
phase of the wastewater treatment process. By monitoring the turbidity
level, it can be determined if the different stages of the process, particularly
in the filtration and purification stages, have been completed correctly.
30
| Water and Wastewater Analysis Catalog
Turbidity
HI83414
Turbidity and Free/
Total Chlorine Meter
EPA Compliant
• Meets USEPA requirements
• CAL Check™
• Alerts users of calibration status
• Up to five-point turbidity calibration
• PC interface via USB
• Log and recall up to 200 measurements
• Meets Good Laboratory Practices
• Contextual help and tutorial mode
Specifications
Non-Ratio
Mode
Ratio Mode
HI83414 Turbidity Specifications
Range
0.00 to 9.99; 10.0 to 40.0 NTU; 0.0 to 99.9; 100 to 268 Nephelos; 0.00 to 9.80 EBC
Resolution
0.01; 0.1 NTU; 0.1; 1 Nephelos; 0.01 EBC
Range
0.00 to 9.99; 10.0 to 99.9; 100 to 4000 NTU; 0.0 to 99.9; 100 to 26800 Nephelos; 0.00 to 9.99;
10.0 to 99.9; 100 to 980 EBC
Resolution
0.01; 0.1; 1 NTU; 0.1; 1 Nephelos; 0.01; 0.1, 1 EBC
Accuracy
±2% of reading plus 0.02 NTU (0.15 Nephelos; 0.01 EBC);
±5% of reading above 1000 NTU (6700 Nephelos; 245 EBC)
Method
nephelometric method (90°) or ratio nephelometric method
(90° & 180°), adaptation of the USEPA method 180.1 and standard method 2130 B
Measuring Mode
normal, average, continuous
Turbidity Standards
<0.1, 15, 100, 750 and 2000 NTU
Calibration
two, three, four or five-point calibration
HI83414 Free and Total Chlorine Specifications
Range
0.00 to 5.00 mg/L (ppm)
Resolution
0.01 mg/L (ppm) from 0.00 to 3.50 mg/L (ppm) ;
0.10 above 3.50 mg/L (ppm)
Accuracy
@25°C/77°F
±0.02 mg/L @ 1.00 mg/L
Method
adaptation of the USEPA Method 330.5 and
Standard Method 4500-Cl G.
Standards
1.00 mg/L (ppm) free chlorine; 1.00 mg/L )(ppm) total chlorine
Calibration
one-point calibration
Ordering Info
HI83414 is supplied with sample cuvettes and caps (5), calibration cuvettes for turbidity
(HI88703-11) and colorimeter (HI93414-11), silicone oil (HI98703-58), cuvette wiping cloth,
scissors, power cord and instruction manual.
Reagents and
Standards
HI93414-11
CAL Check™ calibration standards for free and total chlorine
HI93701-01
free chlorine (Cl₂) reagent kit, 100 tests
HI93701-03
free chlorine (Cl₂) reagent kit, 300 tests
HI93711-01
total chlorine (Cl₂) reagent kit, 100 tests
HI93711-03
total chlorine (Cl₂) reagent kit, 300 tests
HI88703-11
turbidity calibration standards (<0.1, 15, 100, 750 and 2000 NTU)
The HI83414 successfully combines turbidity
and colorimetric measurements to test the
most important parameters of drinking
water: turbidity and free/total chlorine.
This meter is specially designed for water
quality measurements, providing reliable and
accurate readings on low turbidity and chlorine
values. The HI83414 meets and exceeds the
requirements of USEPA and Standard Methods
for turbidity and colorimetric measurements.
Turbidity Testing
Water clarity is paramount when producing water
for human consumption.
Turbidity, an optical property, is a measure of the
cloudiness of water. Turbidity causes light to be
scattered and absorbed rather than transmitted.
The measurement of turbidity is used to indicate
water quality and filtration effectiveness. Increases
in suspended and colloidal matter increase
turbidity. These levels are often associated with
higher levels of disease-causing microorganisms
such as viruses, parasites and some bacteria that
can cause symptoms such as nausea, cramps,
diarrhea, and associated headaches.
Although microbiological testing is also done,
turbidity measurements are used with regularity
to detect changes immediately. EPA regulations
require filter effluent values of 0.3 NTU
(Nephelometric Turbidity Units) in at least 95
percent of measurements taken each month with
a maximum level of 1 NTU.
31
Turbidity
HI93414
Turbidity and Free/
Total Chlorine
Portable Meter
EPA Compliant
• Meets USEPA requirements
• CAL Check™
• Up to four-point turbidity calibration
• USB and RS232 PC connectivity
• Meets Good Laboratory Practices
• Log up to 200 readings
• Automatic turbidity range selection
Power
connector
• iButton® Tag Identification System
USB
RS232
• User-friendly, backlit display
• Battery indicator on startup
The HI93414 measures the most important
parameters of drinking water: turbidity and
free/total chlorine. Designed for water quality
measurements, HI93414 provides reliable and
accurate readings on low turbidity and chlorine
values. The HI93414 meets and exceeds the
requirements of USEPA and Standard Methods
both for turbidity and colorimetric measurements.
For advanced field applications, the HI93414
is equipped with Fast Tracker™—Tag
Identification System (T.I.S.) that makes
data collecting and management simpler
than ever. Fast Tracker™ allows users to
record the time and location of a specific
measurement or series of measurements.
Specifications
HI93414 Turbidity
Range
0.00 to 1000 NTU
Range Selection
automatic
Resolution
0.01 (0.00 to 9.99 NTU); 0.1 (10.0 to 99.9 NTU); 1 (100 to 1000 NTU)
CAL Check™ Calibration Validation
Accuracy
±2% of reading plus 0.02 NTU
With Hanna’s exclusive CAL Check™
validation function, users are able to verify
the performance of the instrument at any
time. Using Hanna’s exclusive ready-made,
NIST traceable standards, validation is user
friendly and ensures proper calibration.
Method
ratio nephelometric method (90° and 180°), ratio of scattered and transmitted light; adaptation of
the USEPA method 180.1 and standard method 2130 B
Measuring Mode
normal, average, continuous
Turbidity Standards
<0.1, 15, 100 and 750 NTU
Calibration
two, three or four-point calibration
iButton® Tags are Easy to Install
Install tags near your sampling points for quick
and easy iButton® readings. Each tag contains
a computer chip with a unique identification
code encased in stainless steel. You can install
a practically unlimited amount of tags.
HI93414 Free and Total Chlorine
Range
Resolution
0.01 mg/L (0.00 to 3.50 mg/L); 0.10 mg/L (above 3.50 mg/L)
Accuracy @25°C /77°F
±0.02 mg/L @ 1.00 mg/L
Detector
silicon photocell with 525 nm narrow band interference filter
Ordering
Info
HI93414-01 is supplied with sample cuvettes and caps (5), calibration cuvettes for turbidity
(HI98703-11), calibration cuvettes for colorimeter (HI93414-11), silicone oil (HI98703-58), cuvette
wiping cloth, scissors, batteries, AC adapter, instruction manual and rugged carrying case.
Reagents and
Standards
HI920005
Tag holders with tags (5)
32
0.00 to 5.00 mg/L
| Water and Wastewater Analysis Catalog
HI93414-11
CAL Check™ calibration standards for free and total chlorine
HI93701-01
free Chlorine (Cl₂) reagent kit, 100 tests
HI93701-03
free Chlorine (Cl₂) reagent kit, 300 tests
HI93711-01
total Chlorine (Cl₂) reagent kit, 100 tests
HI93711-03
total Chlorine (Cl₂) reagent kit, 300 tests
HI98703-11
turbidity calibration standards (<0.1, 15 100 and 750 NTU)
Turbidity
Specifications
Non-ratio
Mode
Ratio Mode
HI88703
Range
0.00 to 9.99; 10.0 to 40.0 NTU; 0.0 to 99.9;
100 to 268 Nephelos; 0.00 to 9.80 EBC
Resolution
0.01; 0.1 NTU; 0.1; 1 Nephelos; 0.01 EBC
Range
0.00 to 9.99; 10.0 to 99.9; 100 to 4000 NTU
0.0 to 99.9; 100 to 26800 Nephelos
0.00 to 9.99; 10.0 to 99.9; 100 to 980 EBC
Resolution
0.01; 0.1; 1 NTU; 0.1; 1 Nephelos; 0.01; 0.1, 1 EBC
Accuracy
±2% of reading plus 0.02 NTU (0.15 Nephelos; 0.01 EBC);
±5% of reading above 1000 NTU (6700 Nephelos; 245 EBC)
Method
nephelometric method (90°) or ratio nephelometric method (90°
& 180°), adaptation of the USEPA method 180.1 and standard
method 2130 B
Measuring Mode
normal, average, continuous
Turbidity Standards
<0.1, 15, 100, 750 and 2000 NTU
Calibration
two, three, four or five-point calibration
Ordering Info
HI88703 is supplied with sample cuvettes and caps (5),
calibration cuvettes (HI88703-11), silicone oil (HI98703-58),
cuvette wiping cloth, power cord and instruction manual.
Standards
HI88703-11
turbidity calibration standards (<0.1, 15, 100,
750 and 2000 NTU)
HI88703
Precision Turbidity Benchtop Meter
EPA Compliant
• Meets USEPA requirements
• Up to five-point turbidity calibration
• USB PC connectivity
• Log and recall up to 200 measurements
• Contextual help and tutorial mode
• Meets Good Laboratory Practices
iButton® Tags are Easy to Install
Install tags near your sampling points for quick
and easy iButton® readings. Each tag contains
a computer chip with a unique identification
code encased in stainless steel. You can install
a practically unlimited amount of tags.
Specifications
HI98703
Range
0.00 to 1000 NTU
Range Selection
automatic
Resolution
0.01 (0.00 to 9.99 NTU); 0.1 (10.0 to 99.9 NTU); 1 (100 to 1000 NTU)
Accuracy
±2% of reading plus 0.02 NTU
Method
ratio nephelometric method (90° and 180°), ratio of scattered
and transmitted light; adaptation of the USEPA method 180.1
and standard method 2130 B
Measuring Mode
normal, average, continuous
Turbidity Standards
<0.1, 15, 100 and 750 NTU
Calibration
two, three or four-point calibration
Ordering
Info
HI98703 is supplied with sample cuvettes and caps (5),
calibration cuvettes, silicone oil (HI98703-58), cuvette wiping
cloth, batteries, AC adapter, instruction manual and rugged
carrying case.
Standards
HI98703-11
turbidity calibration standards (<0.1, 15 100
and 750 NTU)
HI98703
Turbidity Meter
EPA Compliant
• Up to four-point turbidity calibration
• USB and RS232 PC connectivity
• Log for up to 200 readings
• Meets Good Laboratory Practices
• User-friendly, backlit display
• Battery indicator on startup
The HI98703 meets and exceeds the requirements of the USEPA Method
180.1 for wastewater and Standard Method 2130 B for drinking water. The
instrument has an EPA compliance reading mode which rounds readings to
meet EPA reporting requirements. Users will appreciate the accuracy and
sensitivity of this instrument, particularly at very low turbidity levels.
33
Multiparameter
HI5522
Research Grade Meter
pH/ORP/ISE and EC/TDS/Resistivity/
Salinity and Temperature
• CAL Check™
• Five-point pH and ISE calibration
• Large log memory (100,000 records)
• Auto, log-on-demand and AutoHold Logging
• ISE incremental methods provided
• USP compliant
• Multiple input channels
• PC compatible via USB
• Capacitive touch keypad
Specifications
HI5522 is a research grade benchtop meter
that features up to eight measurement
parameters: pH, mV (for Oxidation
Reduction Potential), ISE, conductivity,
resistivity,TDS, salinity and temperature.
pH
ISE Incremental Methods
mV
Ion concentration determinations with ISEs can
be made faster and easier using the streamlined
incremental methods.
Incremental methods involve adding a standard
to a sample or sample to a standard and detecting
the mV change that occurs due to the addition. The
difference in mV determines the concentration.
Historically the user would use mathematical
equations to determine the ion concentration
of the sample; with the HI5522, sample
concentrations are calculated automatically and
then logged into an ISE method report. Up to 200
reports can be saved for future recall. The entire
process can be repeated on multiple samples
without re-entering sets of parameters. Reports
can be printed using HI92000 PC software.
Incremental method techniques can reduce errors
from variables such as temperature, viscosity,
pH or ionic strength. The electrodes remain
immersed throughout the process, thus reducing
measurement time as well as eliminating sample
carry over and its associated errors.
ISE
Temperature**
EC
TDS
Available Methods:
··
··
··
··
Known Addition
Known Subtraction
Analyte Addition
Analyte Subtraction
ISE
HI5522
is compatible
with ion selective
electrodes
34
Resistivity
Code
Parameter
Page
HI4101
Ammonia
4
HI4107
Chloride
4
HI4109
Cyanide
10
HI4110
Fluoride
10
HI4113
Nitrate
12
HI4115
Silver/Sulfide
25
Salinity
Ordering
Info
| Water and Wastewater Analysis Catalog
HI5522
Range
-2.000 to 20.000 pH
Resolution
0.1 pH; 0.01 pH; 0.001 pH
Accuracy
±0.1 pH; ±0.01 pH; ±0.002 pH ±1 LSD
Calibration
automatic, up to five-point calibration, eight standard buffers available,
and five custom buffers
Range
±2000 mV
Resolution
0.1 mV
Accuracy
±0.2 mV ±1 LSD
Range
5•10-⁷ to 5•10⁷ concentration
Resolution
1; 0.1; 0.01; 0.001 concentration
Accuracy
±0.5% (monovalent ions); ±1% (divalent ions)
Calibration
automatic, up to five-point calibration, five fixed standard solutions available for
each measurement unit, and five user defined standards
Range
-20.0 to 120°C; -4.0 to 248.0°F; 253.15 to 393.15K
Resolution
0.1°C; 0.1°F; 0.1K
Accuracy
±0.2°C ; ±0.4°F; ±0.2K (without probe)
Range
0.000 to 9.999 µS/cm; 10.00 to 99.99 µS/cm; 100.0 to 999.9 µS/cm; 1.000 to
9.999 mS/cm; 10.00 to 99.99 mS/cm; 100.0 to 1000.0 mS/cm absolute EC*
Resolution
0.001 µS/cm; 0.01 µS/cm; 0.1 µS/cm; 0.001 mS/cm; 0.01 mS/cm; 0.1 mS/cm
Accuracy
±1% of reading (±0.01 µS/cm)
Calibration
automatic standard recognition, user standard
single point / multi-point calibration
Range
0.000 to 9.999 ppm; 10.00 to 99.99 ppm; 100.0 to 999.9 ppm; 1.000 to 9.999 ppt;
10.00 to 99.99 ppt; 100.0 to 400.0 ppt actual TDS* (with 1.00 factor)
Resolution
0.001 ppm; 0.01 ppm; 0.1 ppm; 0.001 ppt; 0.01 ppt; 0.1 ppt
Accuracy
±1% of reading (±0.01 ppm)
Range
1.0 to 99.9 Ω•cm; 100 to 999 Ω•cm; 1.00 to 9.99 kΩ•cm; 10.0 to 99.9 kΩ•cm;
100 to 999 kΩ•cm; 1.00 to 9.99 MΩ•cm; 10.0 to 100.0 MΩ•cm
Resolution
0.1 Ω•cm; 1 Ω•cm; 0.01 kΩ•cm; 0.1 kΩ•cm; 1 kΩ•cm; 0.01 MΩ•cm; 0.1 MΩ•cm
Accuracy
±2% of reading (±1 Ω•cm)
Range
practical scale: 0.00 to 42.00 psu; natural sea water scale: 0.00 to 80.00 ppt;
percent scale: 0.0 to 400.0%
Resolution
0.01 for practical scale/natural sea water scale; 0.1% for percent scale
Accuracy
±1% of reading
Calibration
percent scale—one-point (with HI7037 standard); all others through EC
HI5522 is supplied with HI1131B pH electrode, HI76312 conductivity probe, HI7662-T temperature
probe, HI76404W electrode holder, HI70004 pH 4.01 buffer solution sachet (2), HI70007 pH 7.01
buffer solution sachet (2), HI700601 electrode cleaning solution sachet (2), HI7082 3.5M KCl
electrolyte solution (30 mL), capillary dropper pipette, 12 VDC adapter, quality certificates, quick
start guide and instruction manual.
(*) Uncompensated conductivity (or TDS) is the conductivity
(or TDS) value without temperature compensation.
(**) Reduced to actual probe limits
Multiparameter
HI3512
Multiparameter Meter
Dual-channel pH/ORP/ISE and EC/TDS/
Resistivity/Salinity and Temperature
• CAL Check™ for pH
·· Alerts users of calibration status
• Calibration points
·· Up to five-point pH calibration and up
to two-point EC calibration
• Logging
·· Automatic logging up to 600 records and log on demand up to 400 samples
• PC connectivity via opto-isolated USB
• Meets Good Laboratory Practices
Specifications
pH
mV
ISE
Temperature*
EC
TDS
Resistivity
Salinity
Ordering
Info
(*) Reduced to actual sensor limits
HI3512
Range
-2.0 to 20.0 pH; -2.00 to 20.00 pH; -2.000 to 20.000 pH
Resolution
0.1 pH; 0.01 pH; 0.001 pH
Accuracy
±0.01 pH; ±0.002 pH
Calibration
up to five-point calibration, seven standard buffers available (1.68, 4.01, 6.86, 7.01,
9.18, 10.01, 12.45), and two custom buffers
Range
±2000.0 mV
Resolution
0.1 mV
Accuracy
±0.2 mV
Range
1•10-⁷ to 9.99•10¹⁰ concentration (choice of units)
Resolution
3 digits
Accuracy
±0.5% of reading (monovalent ions); ±1% of reading (divalent ions)
Calibration
up to five-point calibration points six standard solutions available (0.1, 1, 10, 100,
1000, 10000 ppm)
Range
–20.0 to 120.0°C (4.0 to 248.0°F)
Resolution
0.1°C (0.1°F)
Accuracy
±0.2°C (±0.4°F) (excluding probe error)
Range
0 µS/cm to 400 mS/cm (shows values up to 1000 mS/cm absolute conductivity);
0.001 to 9.999 μS/cm; 10.00 to 99.99 μS/cm; 100.0 to 999.9 μS/cm;
1.000 to 9.999 mS/cm; 10.00 to 99.99 mS/cm; 100.0 to 999.9 mS/cm;
1000 mS/cm (autoranging)
Resolution
0.001 µS/cm; 0.01 µS/cm; 0.1 µS/cm; 0.001 mS/cm; 0.01 mS/cm; 0.1 mS/cm; 1 mS/cm
Accuracy
±1% of reading (±0.01 µS/cm or 1 digit whichever is greater) excluding probe error
Calibration
automatic up to two points with seven Hanna standards (0.00 μS/cm, 84.0 μS/cm,
1.413 mS/cm, 5.00 mS/cm, 12.88 mS/cm, 80.0 mS/cm, 111.8 mS/cm)
Range
0.000 to 9.999 ppm; 10.00 to 99.99 ppm; 100.0 to 999.9 ppm; 1.000 to 9.999 g/L;
10.00 to 99.99 g/L; 100.0 to 400.0 g/L (autoranging)
Resolution
0.001 ppm; 0.01 ppm; 0.1 ppm; 0.001 g/L; 0.01 g/L; 0.1 g/L
Accuracy
±1% of reading (±0.05 ppm or 1 digit whichever greater) excluding probe error
Factor
0.40 to 1.00
Range
1.0 to 99.9 Ω•cm; 100 to 999 KΩ•cm; 1.00 to 9.99 KΩ•cm; 10.0 to 99.9 KΩ•cm;
100 to 999 KΩ•cm; 1.00 to 9.99 MΩ•cm; 10.0 to 100.0 MΩ•cm (autoranging)
Resolution
0.1 Ω•cm; 1 Ω•cm; 0.01 KΩ•cm; 0.1 Ω•cm; 1 Ω•cm; 0.01 MΩ•cm; 0.1 Ω•cm
The HI3512 is a dual-channel benchtop
meter with a graphic LCD designed to
provide accurate laboratory results. Channel
1 features pH/ORP/ISE and temperature
measurement capability while channel 2
features conductivity, TDS, salinity, or resistivity
measurements and temperature capability.
Calibration
The pH channel offers up to five-point pH
calibration with seven standard buffers and up to
two custom buffers.
A five-point ISE calibration selected from up to six
calibration standards makes this instrument very
useful for a large range of ion concentrations.
The EC channel permits a two-point calibration
selected from seven Hanna standards. The
EC channel supports auto-ranging, manual
ranging and lock of the user selected range as
well as temperature compensation selection,
temperature reference selection and temperature
coefficient selection.
Total Dissolved Solids (TDS) factor is useradjustable and can be set between 0.40 and 1.00.
pH and EC channels also provide “out of calibration
range” warnings and a “calibration timeout”
message to remind the user when a new
calibration is necessary.
Messages on the graphic LCD offer directions for
easy and accurate calibration for both channels,
as well as diagnostics to alert the user when
calibration or measurement issues are detected.
Accuracy
±1% of reading (±10 Ω•cm or 1 digit whichever greater) excluding probe error
Range
0.0 to 400.0% NaCl
Code
Parameter
Page
Resolution
0.1% NaCl
HI4101
Ammonia
4
Accuracy
±1% of reading excluding probe error
HI4107
Chloride
4
Calibration
one-point with HI7037 standard (optional)
HI4109
Cyanide
10
HI4110
Fluoride
10
HI4113
Nitrate
12
HI4115
Silver/Sulfide
25
HI3512 is supplied with HI76310 EC/TDS probe, HI1131B pH electrode, HI7662-T temperature
probe, HI70004 pH 4.01 buffer solution sachet, HI70007 pH 7.01 buffer solution sachet, HI700601
electrode cleaning solution sachet (2), HI7082 3.5M KCl electrolyte solution (30 mL), HI76404N
electrode holder, 12 VDC adapter and instructions.
ISE
HI3512
is compatible
with ion selective
electrodes
35
Multiparameter
pH • EC • DO
A hybrid meter that can be used as a
portable, wall-mount or benchtop
The versatile design of edge® enables it to be used as a portable, wall-mount
or benchtop meter. edge® simplifies measurement, configuration, calibration,
diagnostics, logging and transferring data directly to a computer or USB drive.
• Portable field unit
·· edge® is ideal for field use due to its light weight, large screen and thin
design. It can be easily slipped into a backpack or messenger bag. Up to 8 hours of battery life when used as a portable device.
• Wall mount cradle
·· The included wall mount cradle makes it easy to conserve space on
the benchtop and can charge edge® with the AC adapter. Ideal for
continuous monitoring applications.
• Electrode holder with built-in cradle
·· The included electrode holder features a swivel,adjustable arm
with a built-in cradle to hold edge® securely in place at the optimum
viewing angle.
See p.36 for all edge®
compatible probes
edge® technical features
edge® design features
• Two USB ports
edge® includes one standard USB for exporting data to a flash drive.
edge® also includes one micro USB port for exporting files to your
computer as well as charging edge® when the cradle is not available.
• Capacitive touch keypad
edge® features a capacitive touch keypad that gives a distinctive, modern
look. Since the keypad is part of the screen, your buttons can never get
clogged with sample residue.
• Clear, full text readout
edge® features clear, full text guides displayed on the bottom of the screen.
There is no need to decipher scrambled abbreviations or symbols; these
helpful messages guide you through every process quickly and easily.
• Easy to read LCD
edge® features a 5.5” (14 cm) LCD display that you can clearly view from
over 5 m (16.4’). The large display, with its wide 150° viewing angle,
provides one of the easiest to read LCDs in the industry.
• Data logging
edge® allows you to store up to 1000 log records of data. Logging data
sets include readings, GLP data, date and time.
• Zero footprint
Using the wall mount cradle (included), edge® can be placed on a wall,
leaving zero footprint on the benchtop space. The cradle has a built-in
connector to power edge® and charge its batteries.
• GLP
Data from the last calibration you perform is stored in the sensor including
the date, time and standards. When any sensor (pH, EC, or DO) is connected
to edge®, GLP data is automatically transferred.
• Basic mode
You can use edge® in basic mode—ideal for routine measurements by
displaying a simplified screen and features.
• CAL Check™ (edge® pH measurement only)
edge® features Hanna’s exclusive CAL Check™ technology to warn you
if the electrode bulb is not clean or if the buffers are contaminated
during calibration.
3
parameters
pH, EC, DO
36
• 3.5 mm probe input
Plugging an electrode in has never been simpler; no alignments or
broken pins, simply connect the 3.5 mm plug and begin. Digital electrodes
are automatically recognized.
• Sleek design
Incredibly thin and lightweight, edge® measures just 1/2” (12 mm) thick
and weighs just 8.8 ounces (250 g).
0 0.5 8.8 8 5.5 2
footprint
inch thick
oz. weight
(12.7 mm)
(250 g)
| Water and Wastewater Analysis Catalog
hours battery
life
inch display
(14 cm)
USB ports
Multiparameter
Digital electrodes
HI991300
edge® measures pH, conductivity, and dissolved oxygen through
its unique digital electrodes. These digital electrodes are autorecognized, providing sensor type, calibration data and a serial number
when connected to edge® by an easy to plug-in 3.5mm connector.
edge® features Hanna’s exclusive pH CAL Check™ to warn you if
the electrode in use is not clean or if your buffers are contaminated
during calibration. We have added Sensor Check™ for pH sensors
with a matching pin. Our Sensor Check™ feature warns you if the pH
bulb is cracked and/or the junction of the electrode is compromised.
Specifications
pH
mV pH
EC
TDS
Salinity†
-2.00 to 16.00 pH; -2.000 to 16.000 pH†
Resolution
0.01 pH; 0.001 pH†
Accuracy
±0.01 pH; ±0.002 pH†
(@25°C/77°F)
Calibration
automatic, up to three points (five points†) calibration, 5 standard
(7 standard†) buffers available (1.68†, 4.01 or 3.00, 6.86, 7.01, 9.18, 10.01,
12.45†) and two custom buffers†
Range
±1000 mV
Resolution
0.1 mV
Accuracy
±0.2 mV
(@25°C/77°F)
Range
0.00 to 29.99 µS/cm; 30.0 to 299.9 µS/cm;
300 to 2999 µS/cm; 3.00 to 29.99 mS/cm;
30.0 to 200.0 mS/cm; up to 500.0 mS/cm absolute EC**
Resolution
0.01 µS/cm; 0.1 µS/cm; 1 µS/cm; 0.01 mS/cm; 0.1 mS/cm
Accuracy
±1% of reading (±0.5 µS or 1 digit, whichever is greater)
(@25°C/77°F)
Calibration
single cell factor calibration; six standards available:
84 µS/cm, 1413 µS/cm, 5.00 mS/cm, 12.88 mS/cm,
80.0 mS/cm, 118.8 mS/cm, one point offset: 0.00 µS/cm
Range
0.00 to 14.99 mg/L (ppm); 15.0 to 149.9 mg/L (ppm);
150 to 1499 mg/L (ppm); 1.50 to 14.99 g/L; 15.0 to 100.0 g/L;
up to 400.0 g/L absolute TDS using 0.80 conversion factor**
Resolution
0.01 mg/L (ppm); 0.1 mg/L (ppm); 1 (ppm); 0.01 g/L; 0.1 g/L
Accuracy
±1% of reading (±0.03 ppm or 1 digit, whichever is greater)
(@25°C/77°F)
Calibration
through EC calibration
TDS Factor
0.40 to 0.80 (default value is 0.50)
Range
0.0 to 400.0 % NaCl; 2.00 to 42.00 PSU; 0.0 to 80.0 g/L
Resolution
0.1 % NaCl; 0.01 PSU; 0.01 g/L
Temperature
• Automatic
Temperature
Compensation
• IP67 waterproof
protection
• One to two-point
calibration
• BEPS (Battery Error
Prevention System)
• Sensor Check™
• Auto-recognition
of all sensors
• Battery indicator
• Help feature
• Hold feature
·· Freezes readings on
the display
• Backlit, graphic LCD display
HI991300 has been designed to offer pH, conductivity,
total dissolved solids and temperature measurements
in a slim, lightweight, portable unit.
Specifications
0 to 14.00 pH
Resolution
0.01 pH
Accuracy
±0.01 pH
Calibration
automatic, one or two point calibration
with two sets of memorized buffers
(Standard 4.01, 7.01, 10.01 or NIST 4.01,
6.86, 9.18)
Range
0 to 3999 µS/cm
Resolution
1 µS/cm
Accuracy
±2% F.S.
Calibration
automatic one point at: 1382 ppm
(CONV=0.5) or 1500 ppm(CONV=0.7) or
1413 µS/cm
Range
0 to 2000 ppm (mg/L)
Resolution
1 ppm (mg/L)
Accuracy
±2% F.S.
Range
0.0 to 60.0°C/32.0 to 140.0°F
Temperature
Resolution
0.1°C/0.1°F
Accuracy
±0.5°C/±1°F
Ordering
Info
HI991300 is supplied with HI1288 multiparameter probe,
HI70004 pH 4.01 buffer solution sachet, HI70007 pH 7.01
buffer solution sachet, HI70031 1413 µS/cm calibration
solution sachet, HI70032 1382 mg/L (ppm) calibration
solution sachet, HI700601 electrode cleaning solution
sachet, batteries, instructions and rugged carrying case.
pH
PSU and g/L through EC calibration;
% NaCl — one-point with HI7037 sea water standard
Range
0.00 to 45.00 ppm (mg/L); 0.0 to 300.0 % saturation
Resolution
0.01 ppm (mg/L); 0.1 % saturation
Accuracy
± 1.5% of reading ±1 digit
Calibration
one or two-point at 0% (HI7040 solution) and 100% (in air)
Range*
-20.0 to 120.0°C; -4.0 to 248.0°F
Resolution
0.1°C; 0.1°F
Accuracy
±0.5°C; ±0.9°F
EC
TDS
edge® is available in 3 kit configurations: pH, EC and DO
All kits Include: edge®, benchtop docking station with electrode holder, wall-mount cradle,
USB cable, 5 VDC power adapter, quality certificate and instruction manual.
Ordering
Info
HI2020 pH kit includes: HI11310 glass body, refillable pH electrode with
temperature sensor, pH 4 buffer solution sachets (2), pH 7 buffer solution sachets (2),
pH 10 buffer solution sachets (2) and electrode cleaning solution sachets (2).
HI2030 EC kit includes: HI763100 EC probe, 1413 μS/cm conductivity standard
sachets (3) and 12880 μS/cm conductivity standard sachets (3).
HI2040 DO kit includes: HI764080 dissolved oxygen electrode,
HI7041S refill electrolyte solution, DO membrane caps (2) and o-rings (2).
* temperature limits will be reduced to actual probe limits
** with temperature compensation function disabled
† standard mode only
HI991300
Range
Accuracy
±1% of reading
(@25°C/77°F)
Calibration
DO
edge®
Range*
pH/EC/TDS/
Temperature
Meter
37
Multiparameter
HI9829
GPS Multiparameter Meters
pH/ORP/ISE, EC/TDS/Resistivity/Salinity/Seawater σ,
Turbidity, DO, Temperature and Atmospheric Pressure
• Logging from probe or meter
• Fast Tracker™ Tag Identification System
• Sensor Check™
• Auto-recognition of all sensors
• Meets Good Laboratory Practices
• PC compatible via USB
• Help feature
• Backlit, graphic LCD display
• Waterproof casing
Rugged, waterproof and ideal for field measurements
Rugged, waterproof and easy to use, the HI9829 is the ideal meter for field
measurements of lakes, rivers and seas. The HI9829 meter displays 1 to 12
parameters simultaneously from up to 15 user selectable parameters.
Combined with one of the HI76x9829 series probes, the HI9829 can
measure water quality parameters such as pH, ORP, conductivity,
turbidity, temperature, ammonium (NH₄+—N), nitrate (NO₃— —N),
chloride (Cl—), dissolved oxygen (as % saturation or concentration),
resistivity, TDS, salinity, and seawater σ. Atmospheric pressure
is measured for DO concentration compensation.
Autonomously Logging Probes
After starting a log, logging probes can autonomously log parameters
without further connection to the HI9829. To retrieve the logged
measurements, connect the probe to the HI9829 or a PC.
User-friendly Features
The HI9829 features a graphic, backlit LCD that scales digits to fit
up to 12 parameters and allows full configuration of each parameter
measured along with an on-screen graphing capability.
GPS Capabilities
The HI9829 with the GPS option
incorporates a built-in GPS receiver
and antenna that guarantees position
accuracy. Measurements from specific
locations are tracked with detailed
coordinate information that can be
viewed immediately on the display.
• Basic GPS Features
·· Coordinates shown on the
LCD with up to 10 measurement
parameters
·· Signal strength on
LCD display
·· Logged data is embedded with
GPS coordinates
·· Status screen
38
| Water and Wastewater Analysis Catalog
• Advanced GPS Features
·· Coordinates can be associated with alphanumeric locations
·· Distances between current location and predefined locations are displayed
arranged by distance
·· Memorizes last location and time should signal be lost
Multiparameter
Probes and Sensors
Sensor Configurations
Hanna offers a selection of 8 sensors to be used on the intelligent
probes. Sensor replacement is quick and easy with screw type
connectors and are color coded for easy identification. The
HI9829 automatically recognizes sensor presence.
Both logging and non-logging probes can accommodate a
multitude of sensor configurations. The long sensor cap fits all
configurations while the short sensor cap fits configurations
not requiring the HI7609829-4 EC/turbidity sensor.
The HI7609829-4 EC/turbidity sensor is field replaceable and
offers readings from both parameters at the same time.
All potentiometric sensors feature a double junction design and are gel
filled to increase resistance to contamination. One of the ISE sensors can
be used in place of the pH sensor and is automatically recognized. pH in
mV readings are also displayed, making it useful for troubleshooting.
• Interval logging with long battery life
• Use in fresh, brackish or seawater
• IP68 waterproof protection
• 20m (66’) maximum depth
• ABS body with multistrand-multiconductor
shielded cable
• Built-in temperature sensor
or
or
ISE
Conductivity
Conductivity and Turbidity
HI7609829-0 pH
HI7609829-10 Ammonium ISE
HI7609829-3 EC
HI7609829-4 EC/Turbidity
HI7609829-1 pH/ORP
HI7609829-11 Chloride ISE
Dissolved Oxygen
pH
HI7609829-2 DO
HI7609829-12 Nitrate ISE
HI7698295
HI7698296
Short cap for probes without EC/turbidity sensor
Long cap for probes with EC/turbidity sensor
The Perfect Monitoring Tool
Water scientists and managers alike utilize data-collection programs
as part of environmental monitoring. These programs are designed
to reveal changes in water and the environment around it over
time. Reliable, dependable measurements are required to monitor
these changes and understand the contributions from seasonal
fluctuations, weathering, as well as man made pollution.
39
Multiparameter
Specifications
HI9829
HI9829 with GPS
Temperature
Compensation
automatic from -5 to 55°C (23 to 131°F)
GPS
—
Logging Memory
from Meter
44,000 records
Logging Interval
1 second to 3 hours
Computer Interface
USB (with HI 929829 software)
FastTracker™ TAG ID
yes
Waterproof Protection
IP67
Environment
0 to 50°C (32 to 122°F); RH 100%
Power Supply
1.5V alkaline C cells (4) / 1.2V NiMH rechargeable C cells (4), USB, 12V power adapter
Dimensions
221 x 115 x 55 mm (8.7 x 4.5 x 2.2”)
Weight
750g (26.5 oz.)
12 channel receiver, 10 m (30 ft) range
• Field Ready
·· For field calibration, our quick calibration solution allows users to standardize pH and conductivity with one calibration solution.
HI9829 Parameter Specifications
AmmoniumNitrogen
Chloride
NitrateNitrogen
±2000.0 mV
0.02 to 200
ppm (as N)
0.6 to
200 ppm
0.62 to 200
ppm (as N)
0.01 pH / 0.1 mV
0.1 mV
0.01 ppm to 1 ppm; 0.1 ppm to 200 ppm
Accuracy
±0.02 pH / ±0.5 mV
±1.0 mV
±5% of reading or 2 ppm, whichever is greater
Calibration
automatic one, two, or three points with five memorized standard buffers
(pH 4.01, 6.86, 7.01, 9.18, 10.01) or one custom buffer
automatic at one
custom point
1 or 2 point, 10 ppm and 100 ppm
Conductivity
TDS
Resistivity
Salinity
Seawater σ
Range
0 to 200 mS/cm
(absolute EC up to 400 mS/cm)
0 to 400000 mg/L or ppm
(the maximum value depends
on the TDS factor)
0 to 999999 Ω•cm;
0 to 1000.0 kΩ•cm;
0 to 1.0000 MΩ•cm
0.00 to
70.00 PSU
0 to 50.0 σt, σ0, σ15
Resolution
manual:
1 µS/cm; 0.001 mS/cm; 0.01 mS/cm;
0.1 mS/cm; 1 mS/cm;
automatic:
1 µS/cm from 0 to 9999 µS/cm;
0.01 mS/cm from 10.00 to 99.99 mS/cm;
0.1 mS/cm from 100.0 to 400.0 mS/cm;
automatic mS/cm:
0.001 mS/cm from 0.000 to 9.999 mS/cm;
0.01 mS/cm from 10.00 to 99.99 mS/cm;
0.1 mS/cm from 100.0 to 400.0 mS/cm
manual:
1 mg/L (ppm); 0.001 g/L (ppt);
0.01g/L (ppt); 0.1 g/L (ppt); 1 g/L (ppt);
automatic:
1 mg/L (ppm) from 0 to 9999 mg/L (ppm);
0.01 g/L (ppt) from 10.00 to 99.99 g/L (ppt);
0.1 g/L (ppt) from 100.0 to 400.0 g/L (ppt);
autorange g/L (ppt) scales:
0.001 g/L (ppt) from 0.000 to 9.999 g/L (ppt);
0.01 g/L (ppt) from 10.00 to 99.99 g/L (ppt);
0.1 g/L (ppt) from 100.0 to 400.0 g/L (ppt)
dependent on
resistivity reading
0.01 PSU
0.1 σt, σ0, σ15
Accuracy
±1% of reading or ±1 µS/cm,
whichever is greater
±1% of reading or ±1 mg/L,
whichever is greater
—
±2% of reading
or ±0.01 PSU,
±1 σt, σ0, σ15
whichever is
greater
Calibration
automatic one-point with six memorized
standards (84 µS/cm, 1413 µS/cm,
5.00 mS/cm, 12.88 mS/cm, 80.0 mS/cm,
111.8 mS/cm) or custom point
based on conductivity or salinity calibration
Turbidity
Dissolved Oxygen
Atm. Pressure
Temperature
-5.00 to 55.00°C;
23.00 to 131.00°F;
268.15 to 328.15K
pH / mV of pH input
ORP mV
Range
0.00 to 14.00 pH / ±600.0 mV
Resolution
one custom
point
based on conductivity or
salinity calibration
Range
0.0 to 99.9 FNU;
100 to 1000 FNU
0.0 to 500.0%;
0.00 to 50.00 ppm
450 to 850 mm Hg;
17.72 to 33.46 in Hg;
600.0 to 1133.2 mbar;
8.702 to 16.436 psi;
0.5921 to 1.1184 atm;
60.00 to 113.32 kPa
Resolution
0.1 FNU from 0.0 to 99.9 FNU;
1 FNU from 100 to 1000 FNU
0.1%; 0.01 ppm
0.1 mm Hg; 0.01 in Hg; 0.1 mbar;
0.001 psi; 0.0001 atm; 0.01 kPa
0.01°C; 0.01°F; 0.01K
Accuracy
±0.3 FNU or ±2% of reading,
whichever is greater
0.0 to 300.0%: ±1.5% of reading or
±1.0% whichever is greater; 300.0 to 500.0%:
±3% of reading; 0.00 to 30.00 ppm: ±1.5%
of reading or 0.10 ppm, whichever is greater;
30.00 ppm to 50.00 ppm: ±3% of reading
±3 mm Hg within ±15°C
from the temperature
during calibration
±0.15°C; ±0.27°F; ±0.15K
Calibration
automatic 1, 2 or 3 points at 0, 20 and 200 FNU,
or custom
automatic one or two points at 0,
100% or one custom point
automatic at one
custom point
automatic at one
custom point
40
| Water and Wastewater Analysis Catalog
Multiparameter
Accessories
Probe Maintenance Kit
HI7698292
Probe maintenance kit consisting of HI7042S (electrolyte
solution for DO sensor), O-rings for DO sensor (5), small
brush, O-rings for probe (5), and syringe with grease to
lubricate the O-rings.
Ordering Info
Choose your configuration below.
HI9829 —
x
w
W
y
z
x
y
Z
0
Basic meter, no GPS
0
No turbidity basic probe
04
4 meter cable length
1
115V
1
Meter with GPS
1
Turbidity basic probe
10
10 meter cable length
2
230V
2
Autonomously logging
probe, no turbidity
20
20 meter cable length
3
Autonomously logging
probe with turbidity
Quick Calibration Solutions
All HI9829 Kits Include:
Optional Kit Components:
HI9829 or HI98290 (GPS Model) Meter
HI7609829-12 Nitrate sensor
HI710140 Hard carrying case
HI7619829-11 Chloride ISE sensor
Mulitiparameter Probe (based on configuration)
HI7609829-10 Ammonium ISE sensor
HI7609829-1 pH/ORP sensor
HI7698297 Long quick release flow cell
HI7609829-2 Galvanic DO Sensor
HI9828-25 Calibration solution
HI9828-25
Quick calibration solution, 500 mL
HI9828-27
Quick calibration solution, 1 gal
HI7698294
HI920005
HI7692892 Probe Maintenance Kit
HI929829 Application Software
HI7698291 USB cable (PC to meter)
HI710046 12V accessory port cable
Accessories (included)
HI929829
PC application software
HI7698291
USB cable, PC to meter
HI710045 Power supply cable (115V)
HI710046
Car accessory port cable
Instruction Manual
HI7698290
Short calibration beaker (dependent on model chosen)
HI7698293
Long calibration beaker (dependent on model chosen)
HI7698295
Short protective shield (dependent on model chosen)
HI7698296
Long protective shield (dependent on model chosen)
HI920005
iButton® with holder (5 pcs)
HI710140
Hard carrying case
HI710045
Power supply cable
HI920005 iButton® with holder (5 pcs)
HI710005/8 (115V/12 VDC adapter))
Spare Solutions
HI9829-10
25 sachets 10ppm ammonia-nitrogen calibration solution
HI9829-10/11
10 sachets each of 10ppm and 100ppm ammonia-nitrogen calibration solution
HI9829-11
25 sachets 100ppm ammonia-nitrogen calibration solution
HI9829-12
25 sachets 10ppm chloride calibration solution
HI9829-12/13
10 sachets each of 10ppm and 100ppm chloride calibration solution
HI9829-13
25 sachets 100ppm chloride calibration solution
HI9829-14
25 sachets 10ppm nitrate-nitrogen calibration solution
HI7698294
Short flow cell
HI9829-14/15
10 sachets each of 10ppm and 100ppm nitrate-nitrogen calibration solution
HI7698297
Long, quick release flow cell
25 sachets 100ppm nitrate-nitrogen calibration solution
HI76982910
USB cable, PC to probe
HI9829-15
Accessories (optional)
41
Multiparameter
HI98194 • HI98195 • HI98196
Multiparameter Waterproof Meters
pH/ORP/EC/TDS/Resistivity/Salinity/Seawater σ/Dissolved
Oxygen/Atmospheric Pressure and Temperature
• Waterproof
·· IP67 rated waterproof, rugged enclosure for meter, IP68 for probe
• Digital probe
·· Digital probe with integral temperature sensor and up to three ports
for pH/ORP, EC and DO sensors
• Color coded, field replaceable sensors
• Auto-sensor recognition
• Quick calibration feature
·· Standardize pH and conductivity with one calibration solution
• Automatic barometric pressure compensation (HI98194, HI98196)
• Automatic temperature compensation
• Automatic logging
·· Store up to 45,000 samples
• Log-on-demand
·· Store measurement data at the press of a button
• GLP
·· GLP data provides data from previous five calibrations to ensure
Good Laboratory Practices are met
• Dedicated help key
·· On-screen context specific help is available at the press of a button
• Backlit LCD display with multifunction virtual keys
• Dedicated and virtual soft keys
• Quick Connect Probes
·· Fast, secure and waterproof connection
• PC connectivity via opto-isolated micro-USB with Hanna software
• Up to 360 hours of battery life powered by 1.5V AA batteries
For Universal Applications
These waterproof meters provide multiparameter measurement
in compact and rugged, IP67 waterproof enclosures. Ideal for
demanding applications, these meters feature our rugged, quick
connect digital probes with field replaceable sensors.
A backlit, graphic LCD provides easy to read resolution even
in low-lit areas. A combination of dedicated and soft keys
allows easy, intuitive operation in a choice of languages.
Multi-function Sensor
• Quick sensor replacement
·· Sensor replacement is quick and easy with field replaceable, screw
type connectors and are color coded for easy identification. These meters automatically recognize sensors.
HI98194 probe shown
for example
Data Logging
These multiparameter meters allow storage of up to 45,000 continuous
or log-on-demand samples with logging intervals from one second
to three hours. Logged data can be later transferred to a PC with the
HI920015 micro USB cable and Hanna HI9298194 software.
Dedicated HELP Button
The contextual HELP menu can be accessed to obtain on-screen
information and assistance about each feature at the touch of a button.
pH
Conductivity
Dissolved Oxygen
HI7698194-0 pH
HI7698194-3 EC
HI7698194-4 DO
HI7698194-1 pH/ORP
42
| Water and Wastewater Analysis Catalog
Multiparameter
Specifications
pH / mV
ORP
HI98194 (pH/ORP/EC/DO)
Range
0.00 to 14.00 pH / ±600.0 mV
Resolution
0.01 pH / 0.1 mV
Accuracy
±0.02 pH / ±0.5 mV
Resistivity
Salinity
Seawater σ
Dissolved
Oxygen
Atmospheric
Pressure
Temperature
HI98196 (pH/ORP/DO)
Calibration
automatic one, two, or three points with automatic recognition of five standard buffers (pH 4.01, 6.86, 7.01, 9.18, 10.01) or one custom buffer
Range
±2000.0 mV
Resolution
0.1 mV
Accuracy
±1.0 mV
Calibration
automatic at one custom point (relative mV)
Range
0 to 200 mS/cm (absolute EC up to 400 mS/cm)
—
Resolution
manual: 1 µS/cm; 0.001 mS/cm; 0.01 mS/cm; 0.1 mS/cm; 1 mS/cm; automatic: 1 µS/cm from
0 to 9999 µS/cm; 0.01 mS/cm from 10.00 to 99.99 mS/cm; 0.1 mS/cm from 100.0 to 400.0 mS/cm;
automatic mS/cm: 0.001 mS/cm from 0.000 to 9.999 mS/cm; 0.01 mS/cm from 10.00
to 99.99 mS/cm; 0.1 mS/cm from 100.0 to 400.0 mS/cm
—
Accuracy
±1% of reading or ±1 µS/cm whichever is greater
—
Calibration
automatic single point, with six standard solutions (84 µS/cm, 1413 µS/cm,
5.00 mS/cm, 12.88 mS/cm, 80.0 mS/cm, 111.8 mS/cm) or custom point
—
Range
0.0 to 400.0 ppt (g/L) (the maximum value depends on the TDS factor)
—
Resolution
manual: 1 ppm (mg/L); 0.001 ppt (g/L); 0.01 ppt (g/L); 0.1 ppt (g/L); 1 ppt (g/L);
automatic: 1 ppm (mg/L) from 0 to 9999 ppm (mg/L); 0.01 ppt (g/L) from 10.00 to 99.99 ppt (g/L);
—
0.1 ppt (g/L) from 100.0 to 400.0 ppt (g/L); automatic ppt (g/L): 0.001 ppt (g/L) from 0.000 to 9.999
ppt (g/L); 0.01 ppt (g/L) from 10.00 to 99.99 ppt (g/L); 0.1 ppt (g/L) from 100.0 to 400.0 ppt (g/L)
Accuracy
±1% of reading or ±1 ppm (mg/L) whichever is greater
—
Calibration
based on conductivity calibration
—
Range
0 to 999999 Ω•cm; 0 to 1000.0 kΩ•cm; 0 to 1.0000 MΩ•cm
—
Resolution
dependent on resistivity reading
—
Calibration
based on conductivity calibration
—
Range
0.00 to 70.00 PSU
—
Resolution
0.01 PSU
—
Accuracy
±2% of reading or ±0.01 PSU whichever is greater
—
Calibration
based on conductivity calibration
—
Range
0.0 to 50.0 σt , σ₀, σ₁₅
—
Resolution
0.1 σt , σ₀, σ₁₅
—
Accuracy
±1 σt , σ₀, σ₁₅
—
Calibration
based on conductivity calibration
Range
0.0 to 500.0%; 0.00 to 50.00 ppm (mg/L)
—
0.0 to 500.0%; 0.00 to 50.00 ppm (mg/L)
Resolution
0.1%; 0.01 ppm (mg/L)
—
0.1%; 0.01 ppm (mg/L)
Accuracy
0.0 to 300.0%: ±1.5% of reading or ±1.0%
whichever is greater; 300.0 to 500.0%: ±3%
of reading; 0.00 to 30.00 ppm (mg/L): ±1.5%
of reading or ±0.10 ppm (mg/L), whichever is
greater; 30.00 ppm (mg/L) to 50.00 ppm (mg/L):
±3% of reading
—
0.0 to 300.0%: ±1.5% of reading or ±1.0%
whichever is greater; 300.0 to 500.0%: ±3%
of reading; 0.00 to 30.00 ppm (mg/L): ±1.5%
of reading or ±0.10 ppm (mg/L), whichever is
greater; 30.00 ppm (mg/L) to 50.00 ppm (mg/L):
±3% of reading
Calibration
automatic one or two points at 0, 100% or one
custom point
—
automatic one or two points at 0, 100%
or one custom point
Range
450 to 850 mm Hg; 17.72 to 33.46 in Hg; 600.0 to
1133.2 mbar; 8.702 to 16.436 psi; 0.5921 to 1.1184 —
atm; 60.00 to 113.32 kPa
450 to 850 mm Hg; 17.72 to 33.46 in Hg; 600.0 to
1133.2 mbar; 8.702 to 16.436 psi; 0.5921 to 1.1184
atm; 60.00 to 113.32 kPa
Resolution
0.1 mm Hg; 0.01 in Hg; 0.1 mbar; 0.001 psi;
0.0001 atm; 0.01 kPa
—
0.1 mm Hg; 0.01 in Hg; 0.1 mbar; 0.001 psi;
0.0001 atm; 0.01 kPa
Accuracy
±3 mm Hg within ±15°C from the temperature
during calibration
—
±3 mm Hg within ±15°C from the temperature
during calibration
Calibration
automatic at one custom point
—
automatic at one custom point
Range
-5.00 to 55.00°C; 23.00 to 131.00°F; 268.15 to 328.15K
EC
TDS
HI98195 (pH/ORP/EC)
Resolution
0.01°C; 0.01°F; 0.01K
Accuracy
±0.15°C; ±0.27°F; ±0.15K
Calibration
automatic at one custom point
—
HI98194 is supplied with HI7698194/4 probe, HI7698194-1 pH/ORP sensor, HI7698194-3 EC sensor and HI7698194-2 DO sensor and HI76981942 probe maintenance kit.
Ordering
Info
HI98195 is supplied with HI7698195/4 probe, HI7698194-1 pH/ORP sensor, HI7698194-3 EC sensor, HI76981952 probe maintenance kit and HI76981943 calibration beaker.
HI98196 is supplied with HI7698196/4 probe, HI7698194-1 pH/ORP sensor, HI7698194-2 DO sensor and HI76981942 probe maintenance kit.
All models include HI76981943 calibration beaker, HI9828-25 quick calibration solution, Hanna PC software, HI920015 micro USB cable, 1.5V AA batteries (4), instruction
manual, quick start guide, quality certificate and rugged carrying case with custom insert.
43
Buffers and Standards
General Cleaning and
Storage Solutions
General Use Electrode Cleaning Solutions
Clean the sensing portion of your electrodes weekly to prevent
fouling and to maintain accuracy. Immerse the electrode in
the proper cleaning solution for at least 15 to 20 minutes.
Electrode Storage Solutions
To minimize junction clogging and ensure fast response
time, always keep the glass bulb and the junction of your
pH electrode moist. Store the electrode with a few drops
of HI70300 storage solution in the protective cap.
Code
Application
Package
HI7061L
general purpose cleaning solution
500 mL bottle
HI70300L
electrode storage solution
500 mL bottle
pH Technical Calibration Solutions
Electrode Fill Solutions
Technical Solutions (±0.01 pH) for Each Point
of the pH Scale
Electrode Fill Solutions
The electrolyte level in refillable electrodes should
be checked before performing any measurement.
If the level is low, refill with the proper electrolyte
solution to ensure the correct electrode performance.
This simple maintenance helps guarantee adequate
head pressure to keep the liquid junction flowing.
Code
Description
Package
HI7071
electrolyte solution, 3.5M KCl + AgCl
30 mL bottle (4)
HI7071M
electrolyte solution, 3.5M KCl + AgCl
230 mL bottle
HI7082
electrolyte solution, 3.5M KCl
30 mL bottle (4)
HI7082M
electrolyte solution, 3.5M KCl
230 mL bottle
HI7082L
electrolyte solution, 3.5M KCl
460 mL bottle
ORP Test Solutions
ORP standard solutions allows users to test
the precision of ORP electrodes.
To obtain precise and valid pH measurements, the pH meter
and electrode must be calibrated at a minimum of two different
points, close to the value of the sample to be tested.
These solutions are dedicated to applications that require
extremely accurate pH monitoring, and come with a certificate
of analysis prepared by comparison against NIST standards.
Also available are solution bottles that are colored
according to a given standard calibration value: HI5004-R
(Red), HI5007-G (Green) and HI5010-V (Violet).
Easy to Use Single Dose Sachets
For the highest level of reliability of field instrumentation, technical
solutions are also provided in convenient single dose sachets.
pH Value
@25°C
Code
Package
4.01
HI5004
500 mL bottle
4.01
HI5004-01
1 L bottle
4.01
HI5004-R
500 mL bottle (red colored solution)
4.01
HI50004-02
20 mL (25) sachets
7.01
HI5007
500 mL bottle
7.01
HI5007-01
1 L bottle
7.01
HI5007-G
500 mL bottle (green colored solution)
7.01
HI50007-02
20 mL (25) sachets
10.01
HI5010
500 mL bottle
Code
Description
Package
10.01
HI5010-01
1 L bottle
HI7021L
ORP test solution @240 mV (@25°C)
500 mL bottle
10.01
HI5010-V
500 mL bottle (violet colored solution)
HI7022L
ORP test solution @470 mV (@25°C)
500 mL bottle
10.01
HI50010-02
20 mL (25) sachets
44
| Water and Wastewater Analysis Catalog
Buffers and Standards
Dissolved Oxygen
Solutions
It is crucial to the performance of
your DO probe to keep the sensor
active with regular maintenance.
Code
Application
Package
HI7040M
zero oxygen solution
230 mL bottle
HI7040L
zero oxygen solution
500 mL bottle
EC Calibration Solutions
12880 µS/cm Calibration Solution
pH Standard Calibration Solutions
The 12880 µS/cm (12.88 mS/cm) calibration solution
is widely used to assure the proper performance of
conductivity meters with a scale higher than 10 mS/cm.
with ±0.01 pH accuracy @25°C
1413 µS/cm Calibration Solution
4.01 pH Buffer Solution
The 1413 µS/cm calibration solution
is best suited for general use.
Hanna buffer solutions are prepared according to precise formulas and
are standardized with a pH electrode and meter calibrated with NIST
standards. This buffer value is widely used in water purification plants, in
the food industry and wherever the pH is expected to be slightly acidic.
84 µS/cm Calibration Solution
7.01 pH Buffer Solution
pH 7.01 is the most widely used among all buffer solutions. For this reason
we have prepared it in a wider variety of sizes to meet application demand.
8.30 pH Buffer Solution
To increase accuracy of your alkalinity titration,
Hanna offers the 8.30 pH buffer solution.
10.01 pH Buffer Solution
pH 10.01 solution is commonly used to calibrate
equipment used for analyzing basic samples.
pH Value
@25°C
Code
Package
4.01
HI7004L
500 mL bottle
4.01
HI7004/1L
1 L bottle
4.01
HI70004P
20 mL (25) sachets
7.01
HI7007L
500 mL bottle
7.01
HI7007/1L
1 L bottle
7.01
HI70007P
20 mL (25) sachets
8.30
HI70083M
500 mL bottle
10.01
HI7010L
500 mL bottle
10.01
HI7010/1L
1 L bottle
10.01
HI70010P
20 mL (25) sachets
This 84 µS/cm conductivity solution makes it possible
to calibrate instruments with a conductivity scale of up to
200 µS/cm, in the measurement of pure or distilled water.
Code
EC Value @25°C
Package
HI7030L
12880 µS/cm
500 mL bottle
HI7031L
1413 µS/cm
500 mL bottle
HI7033L
84 µS/cm
500 mL bottle
Titration Solutions
Code
Description
HI70424
amino-propanol buffer, 25 mL bottle
HI70427
HNO₃ solution (1.5 M), 500 mL bottle
HI70428
NaOH solution (0.25 N), 1 L bottle
HI70448
AgNO₃ solution (0.02 M), 1 L bottle
HI70449
EDTA solution (0.02 M), 1 L bottle
HI70456
NaOH solution (0.1 N), 1 L bottle
HI70458
H₂SO₄ solution (0.01 M), 1 L bottle
HI70463
HCl solution (0.1 N), 1 L bottle
HI84531-50
titrant solution for low range,
120 mL bottle
HI84531-51
titrant solution for high range,
120 mL bottle
HI84531-55
pump calibration standard, 230 mL bottle
45
ISE Solutions, ISA Adjusters and Accessories
ISE Solutions, ISA (Ionic Strength
Adjusters) and Accessories
Ammonia ISE
Code
Description
Package
HI4001-00
alkaline ISA for ammonia and cyanide ISEs
500 mL bottle
HI4001-01
0.1 M ammonia standard
500 mL bottle
HI4001-02
100 mg/L (ppm) ammonia standard (as N)
500 mL bottle
HI4001-03
1000 mg/L (ppm) ammonia standard (as N)
500 mL bottle
HI4001-40
ammonia filling solution
30 mL bottles (4)
HI4001-45
conditioning and storage solution for
HI4101 ammonia ISE
500 mL bottle
HI4000-47
pH 4 and pH 7 buffers with chloride ions
background, used to check internal glass
electrode of gas sensors
10 packages ea.
and 2 beakers
HI4000-52
gas sensor membrane cap for ammonia
HI4001-51
ammonia membrane kit (20)
HI4000-51
gas sensor replacement pH for ammonia sensor
Calcium ISE
Fluoride ISE
Code
Description
Package
HI4010-00
TISAB II for fluoride ISEs
500 mL bottle
1 gallon
HI4010-05
TISAB II for fluoride ISEs
HI4010-06
TISAB III concentrate for fluoride ISEs
500 mL bottle
HI4010-01
0.1 M fluoride standard
500 mL bottle
HI4010-02
100 mg/L (ppm) fluoride standard
500 mL bottle
HI4010-03
1000 mg/L (ppm) fluoride standard
500 mL bottle
HI7075
electrolyte solution, 1.7M KNO₃ and 0.7M KCl
30 mL bottles (4)
Code
Description
Package
HI4010-10
10 mg/L (ppm) fluoride standard premixed with TISAB II
500 mL bottle
HI4004-00
ISA for calcium ISEs
500 mL bottle
HI4010-11
1 mg/L (ppm) fluoride standard premixed with TISAB II
500 mL bottle
HI4004-01
0.1 M calcium standard
500 mL bottle
HI4010-12
2 mg/L (ppm) fluoride standard premixed with TISAB II
500 mL bottle
HI7082
3.5M KCL electrolyte solution
for double junction electrodes
30 mL bottle
(4)
HI4010-30
kit containing 4 bottles each of : HI 4010-10,
HI 4010-11 and HI 4010-00
500 mL ea. bottle
HI4004-45
conditioning and storage
solution for calcium ISEs
500 mL bottle
HI4110-51
fluoride module for combination electrode
HI4004-51
calcium module for half-cell
HI4104-51
calcium module for combination
Nitrate ISE
Chloride ISE
Code
Description
Package
HI4000-00
ISA for halide ISEs
500 mL bottle
HI4007-01
0.1 M chloride standard
500 mL bottle
HI4007-02
100 mg/L (ppm) chloride
standard
500 mL bottle
HI4007-03
1000 mg/L (ppm) chloride
standard
500 mL bottle
electrolyte solution, 1 M KNO₃
30 mL bottles
(4)
HI7072
HI4000-70
halide polishing strip
Code
Description
Size
HI4013-00
ISA for nitrate ISEs
500 mL bottle
HI4013-01
0.1 M nitrate standard
500 mL bottle
HI4013-02
100 mg/L (ppm) nitrate
standard (as N)
500 mL bottle
HI4013-03
1000 mg/L (ppm) nitrate
standard (as N)
500 mL bottle
HI7078
electrolyte solution, 0.5M
(NH₄)₂ SO₄
30 mL bottles
(4)
HI4013-06
nitrate interferent
suppressant ISA
500 mL bottle
HI4013-53
Nitrate module 3 pack for half-cell
HI4113-53
Nitrate module 3 pack for combination
Silver/Sulfide ISE
Cyanide ISE
Code
Description
Package
500 mL bottle
HI4000-00
ISA for halide ISEs
Code
Description
Package
HI4015-00
SAOB (sulfide antioxidant buffer)
500 mL bottle + 18 g (2 components)
HI4001-00
alkaline ISA for ammonia and cyanide ISEs
500 mL bottle
HI4015-01
0.1 M silver standard
500 mL bottle
HI7072
electrolyte solution, 1 M KNO3
30 mL bottles (4)
HI7072
electrolyte solution, 1 M KNO3
30 mL bottles (4)
HI4000-70
halide polishing strip
HI4000-70
halide polishing strip
46
| Water and Wastewater Analysis Catalog
pH and ORP Electrodes
pH and ORP Electrodes
HI1053B
Refillable, Combination pH
Electrode
HI1230B
with Low Temperature (LT) Glass and
Conical Tip
012 mm
Reference
double, Ag/AgCl
Reference
double, Ag/AgCl
Junction / Flow Rate
ceramic, single / 15-20 µL/h
Junction / Flow Rate
ceramic, triple / 40-50 µL/h
Electrolyte
gel
Electrolyte
KCl 3.5M
Max Pressure
2 bar
Max Pressure
0.1 bar
Range
pH: 0 to 13
Range
pH: 0 to 12
Recommended
Operating Temp.
0 to 70°C
(32 to 158°F) — GP
Recommended
Operating Temp.
-5 to 100°C
(23 to 212°F) - LT
Tip /Shape
spheric (dia: 7.5 mm)
Tip /Shape
conic (12 x 12 mm)
Temperature Sensor
no
Temperature Sensor
no
Amplifier
no
Amplifier
no
Body Material
PEI
Body Material
glass — LT
Ordering
Info
HI1230B combination pH
electrode with 1 m (3.3') cable
and BNC connection
Ordering
Info
HI1053B refillable, combination
pH electrode w/ conical tip, 1 m (3.3')
cable and BNC connection
120 mm
120 mm
Combination pH Electrode
012 mm
HI1048B
HI1131B
pH Electrode with CPS™
09 mm
012 mm
(Clogging Prevention System)
Reference
double, Ag/AgCl
Reference
Junction / Flow Rate
ceramic, single / 15-20 µL/h
Junction / Flow Rate
open, CPS
Electrolyte
KCl 3.5M
Electrolyte
KCl 3.5M
TM
Max Pressure
0.1 bar
Max Pressure
0.1 bar
pH: 0 to 13
Range
pH: 0 to 12
Recommended
Operating Temp.
0 to 100°C
(32 to 212°F) — HT
Recommended
Operating Temp.
0 to 80°C
(32 to 176°F) - GP
Tip /Shape
spheric (dia: 9.5 mm)
Tip /Shape
dome (dia: 8 mm)
Temperature Sensor
no
Temperature Sensor
yes
Amplifier
no
Amplifier
yes
Body Material
glass
Body Material
glass
Ordering
Info
HI1131B refillable, combination
pH electrode with 1 m (3.3') cable
and BNC connection
Ordering
Info
HI1048B pH electrode with CPS™
(Clogging Prevention System) with
1 m (3.3') cable and BNC connection
010 mm
012 mm
HI3230B
HI3131B
ORP Electrode
Refillable Combination
ORP Electrode
Ideal for Municipal Water and QC
Reference
single, Ag/AgCl
Reference
single, Ag/AgCl
Junction / Flow Rate
ceramic, single / 15-20 µL/h
Junction / Flow Rate
ceramic, single
Electrolyte
KCl 3.5M + AgCl
Electrolyte
gel
Max Pressure
0.1 bar
Max Pressure
2 bar
Range
ORP: ±2000 mV
Range
ORP: ±2000 mV
Recommended
Operating Temp.
-5 to 70°C
(23 to 158°F)
Recommended
Operating Temp.
-5 to 70°C
(23 to 158°F)
Tip /Shape
platinum pin
Tip /Shape
platinum pin
Temperature Sensor
no
Temperature Sensor
no
Amplifier
no
Amplifier
no
Body Material
glass
Body Material
PEI
Ordering
Info
HI3131B refillable, combination
ORP electrode with 1 m (3.3') cable
and BNC connection
Ordering
Info
HI3230B gel-filled, combination
ORP electrode w/ platinum contact,
1 m (3.3') cable and BNC connection
120 mm
150 mm
double, Ag/AgCl
Range
120 mm
120 mm
Refillable Combination
pH Electrode
012 mm
012 mm
47
edge® Compatible Digital Electrodes
(p.36)
Compatible Digital Electrodes
These digital electrodes are auto-recognized, providing sensor type,
calibration data and a serial number when connected to edge®.
edge® features Hanna’s exclusive pH CAL Check™ to warn you if the electrode
in use is not clean or if your buffers are contaminated during calibration. We
have added Sensor Check™ for pH sensors with a matching pin. Our Sensor
Check™ feature warns you if the pH bulb is cracked and/or the junction of the
electrode is compromised.
• GLP
Data from the last calibration you
perform is stored in the sensor
including the date, time and
standards. When any sensor (pH, EC,
or DO) is connected to edge®, GLP
data is automatically transferred.
• 3.5 mm probe Input
Plugging an electrode in
has never been simpler; no
alignments or broken pins,
simply connect the 3.5 mm plug
and begin. Digital electrodes
are automatically recognized.
HI12301
Sensor Check™
Combination, Digital Smart
pH Electrode
double, Ag/AgCl
Reference
double, Ag/AgCl
Junction / Flow Rate
ceramic, single / 15-20 µL/h
Junction / Flow Rate
ceramic, single / 15-20 µL/h
Electrolyte
gel
Electrolyte
gel
Max Pressure
2 bar
Max Pressure
2 bar
Range
pH: 0 to 13
Range
pH: 0 to 13
Recommended
Operating Temp.
-5 to 70°C
(23 to 158°F) - GP
Recommended
Operating Temp.
-5 to 70°C
(23 to 158°F) - GP
Tip /Shape
spheric (dia: 7.5 mm)
Tip /Shape
spheric (dia: 7.5 mm)
Temperature Sensor
yes
Temperature Sensor
yes
Matching Pin
yes
Matching Pin
no
Amplifier
yes
Amplifier
yes
Body Material
PEI
Body Material
PEI
Ordering
Info
HI 12301 combination, digital smart
pH electrode with 1m (3.3’) coaxial
cable and 3.5mm jack connection.
Ordering
Info
HI 12300 combination, digital pH
electrode with 1m (3.3’) coaxial cable
and 3.5mm jack connection.
120 mm
120 mm
Reference
012 mm
HI11311
HI10530
with Matching Pin for Sensor Check™
with Conical Tip
Refillable, Combination,
Digital Smart pH Electrode
Reference
double, Ag/AgCl
Reference
double, Ag/AgCl
Junction / Flow Rate
ceramic, single / 15-20 µL/h
Junction / Flow Rate
ceramic, triple / 40-50 µL/h
Electrolyte
KCl 3.5M
Electrolyte
KCl 3.5M
Max Pressure
0.1 bar
Max Pressure
0.1 bar
Range
pH: 0 to 13
Range
pH: 0 to 13
Recommended
Operating Temp.
-5 to 100°C
(23 to 212°F) - HT
Recommended
Operating Temp.
-5 to 100°C
(23 to 212°F) - LT
Tip /Shape
spheric (dia: 9.5 mm)
Tip /Shape
conic (12 x 12 mm)
Temperature Sensor
yes
Temperature Sensor
yes
Matching Pin
yes
Matching Pin
no
Amplifier
yes
Amplifier
yes
Body Material
glass
Body Material
glass
Ordering
Info
HI 11311 refillable, combination,
digital smart pH electrode with
1m (3.3’) coaxial cable and 3.5mm
jack connection
Ordering
Info
HI 10530 refillable, combination,
digital pH electrode with conical tip,
1m (3.3’) coaxial cable and 3.5mm
jack connection.
| Water and Wastewater Analysis Catalog
120 mm
120 mm
Sensor Check™
Refillable, Combination,
Digital Smart pH Electrode
09 mm
48
Combination, Digital Smart
pH Electrode
with Matching Pin for Sensor Check™
012 mm
012 mm
HI12300
012 mm
HI98190 pH and ORP Compatible Electrodes
HI98190 (p. 25) pH and ORP Compatible Electrodes
HI12963
HI12303
pH Electrode
Combination pH Electrode
with Quick Connection
Reference
single, Ag/AgCl
Reference
double, Ag/AgCl
Junction / Flow Rate
cloth
Junction / Flow Rate
ceramic, single / 15-20 µL/h
Electrolyte
gel
Electrolyte
gel
Max Pressure
3 bar
Max Pressure
2 bar
Range
pH: 0 to 13
Range
pH: 0 to 13
Recommended
Operating Temp.
0 to 80°C
(32 to 176°F) - GP
Recommended
Operating Temp.
0 to 70°C
(32 to 158°F) — GP
Tip /Shape
spheric (dia: 5 mm)
Tip /Shape
spheric (dia: 7.5 mm)
Temperature Sensor
yes
Temperature Sensor
yes
Amplifier
yes
Amplifier
yes
Body Material
Titanium
Body Material
PEI
Ordering
Info
HI12963 pH electrode with
titanium casing and 1 m (3.3') cable
and quick connection
Ordering
Info
HI12303 combination pH
electrode with 1 m (3.3') cable
and quick connection
014 mm
120 mm
105 mm
with Titanium Casing and Quick
Connection
012 mm
HI11313
HI10533
with Quick Connection
with Conical Tip and Quick Connection
09 mm
012 mm
Refillable, Combination
pH Electrode
Reference
double, Ag/AgCl
Reference
double, Ag/AgCl
Junction / Flow Rate
ceramic, single / 15-20 µL/h
Junction / Flow Rate
ceramic, triple / 40-50 µL/h
Electrolyte
KCl 3.5M
Electrolyte
KCl 3.5M
Max Pressure
0.1 bar
Max Pressure
0.1 bar
Range
pH: 0 to 13
Range
pH: 0 to 12
Recommended
Operating Temp.
0 to 100°C
(32 to 212°F) — HT
Recommended
Operating Temp.
-5 to 100°C
(23 to 212°F) - LT
Tip /Shape
spheric (dia: 9.5 mm)
Tip /Shape
conic (12 x 12 mm)
Temperature Sensor
yes
Temperature Sensor
yes
Amplifier
yes
Amplifier
yes
Body Material
glass
Body Material
glass — LT
Ordering
Info
HI11313 refillable, combination
pH electrode with 1 m (3.3') cable and
quick connection
Ordering
Info
HI10533 refillable, combination
pH electrode w/ conical tip, 1 m (3.3')
cable and quick connection
120 mm
120 mm
Refillable, Combination
pH Electrode
012 mm
012 mm
Refillable, Combination
ORP Electrode
HI36203
with Quick Connection
with Quick Connection
Combination ORP Electrode
Reference
single, Ag/AgCl
Reference
single, Ag/AgCl
Junction / Flow Rate
ceramic, single / 15-20 µL/h
Junction / Flow Rate
ceramic, single
Electrolyte
KCl 3.5M + AgCl
Electrolyte
gel
Max Pressure
0.1 bar
Max Pressure
2 bar
Range
ORP: ±2000 mV
Range
ORP: ±2000 mV
Recommended
Operating Temp.
-5 to 70°C
(23 to 158°F)
Recommended
Operating Temp.
-5 to 70°C
(23 to 158°F)
Tip /Shape
platinum pin
Tip /Shape
platinum pin
Temperature Sensor
yes
Temperature Sensor
yes
Amplifier
yes
Amplifier
yes
Body Material
glass
Body Material
PEI
Ordering
Info
HI36183 combination ORP
electrode with 1 m (3.3') cable
and quick connection
Ordering
Info
HI36203 combination ORP
electrode with and 1 m (3.3') cable
and quick connection
120 mm
120 mm
HI36183
012 mm
49
Magnetic Stirrer
HI190M
Our Most Popular
Magnetic Mini-Stirrer
• Compact size
·· The compact size of this stirrer allows users to maximize
bench space for efficiency and safety
• Safety
·· Speedsafe™ limits the maximum speed to 1000 rpm even
if a load is suddenly removed
• Built to last
·· The ABS housing resists most harmful chemicals in the lab
The HI190M is a compact and lightweight, so that lack of
laboratory bench space is no longer a concern.
This stirrer incorporates electronic controls that allow the user to
regulate the speed with greater precision. Often, in the lab, a sample
is removed from the stirrer before reducing the speed. This would
cause the motor of conventional equipment to accelerate until it is
destroyed. This does not pose a problem with HI190M, as the Speedsafe™
mechanism ensures that the maximum speed is never exceeded.
HI190M is supplied with an ABS cover that will resist the
harmful effects of chemicals that are accidentally spilled.
Speedsafe™
50
| Water and Wastewater Analysis Catalog
Specifications
HI190M
Maximum Stirring Capacity
1 liter (0.26 gallons)
Min. Speed Range
100 rpm
Max. Speed Range
1000 rpm
Cover Material
ABS plastic
Ordering
Info
HI190M mini-stirrer is supplied with micro stir bar
and instructions.
Accessories
HI731319 magnetic micro stir bar (10)
Hanna Online / Warranty
Hanna Online
Quick access to our entire catalog
Visit www.hannainst.com. There you can search for products, look up local office contacts,
consult our knowledgebase and download instruction manuals, MSDS, and brochures.
Limited Warranty
Hanna products are manufactured in our ISO 9001:2008 facilities, meeting the highest quality standards in the industry. Hanna’s high standards also
apply should a product be returned due to defects in material or workmanship. Our extensive warranty extends up to five years on some products.
• Limitations: Warranted products may be returned for repair or replacement only at the discretion of Hanna. In some circumstances,
remedy may constitute refund for the price paid for the product.
The warranty period commences from the original date of sale to the user or a maximum of 18 months from factory ship date.
Warranty is valid only when the product is used under normal conditions and in accordance with operating limitations and prescribed
maintenance procedures. The express warranty stated previously is the only express warranty given by Hanna to the end-user
buyer. Hanna expressly disclaims any warranties implied by law, including but not limited to warranty of merchantability of fitness
for a particular purpose. Hanna shall not be liable for any individual or consequential damages of any kind for breach of any warranty,
negligence, on the basis of strict liability or otherwise. Hanna’s warranty periods differ across our range of instrumentation, please
visit us on the web at: www.hannainst.com or contact your local Hanna representative for specific warranty information.
Hanna Instruments® reserves the right to change or modify the design of its products at any time without advance notice.
51
We Design, Manufacture, Supply and Support All of Our Products.
When you buy a Hanna product, you’re not only buying the best value for your money, but you’re also receiving the benefit
of Hanna’s unsurpassed customer service and post-sale technical support.
With 60 offices in over 40 countries, Hanna dedicates itself to be a worldwide leader in service and selection.
WW-CAT 2.0 05/15 PRINTED IN USA
Offering research grade quality at competitive prices, every Hanna office strives to work with each customer to develop
a solution tailored to their needs, and within their budget.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising