Epson | 595Wi | Start Here Guide | Epson 595Wi Start Here Guide

4 Use PC Free Annotation
ress one of the source buttons on the remote
P
control to select the source for the image you want
to annotate.
Image from a
computer connected
to the Computer1
or Computer2 port
Image from a computer with
an HDMI connection, or a
video player
Image from an
external device
connected to the
USB port
Image from a computer or
iPad connected through a
wired or wireless network
• Annotation mode displays the built-in toolbar on
o activate the toolbar, tap the board with the pen or
T
your finger. If you don’t see the
icon, tap the
icon and then tap the
icon.
ote: If you only see the
N
PC Free Annotation mode.
3
icon, you are already in
To close the toolbar, select the
icon at the
• Whiteboard annotation mode lets you project a white
Select from various
image sources
connected to the
projector
or black screen or background pattern, and use the
pen or your finger to write or draw as you would on a
chalkboard or dry erase board.
Select whiteboard
annotation mode
Select annotation mode
Use highlighter
Use black, red, or blue
pen—select small dot
for thin line
Use black, red, or blue
pen—select large dot
for thick line
Erase—select small dot
for thin eraser
Erase—select large dot
for thick eraser
Hide toolbar after each
annotation
Clear all annotations
* In annotation mode, the
Access menu
system for
additional
adjustments
Close toolbar
select background tool does not appear.
Ready to Learn More?
Switch between PC
Interactive and PC
Free Annotation
• See the online BrightLink User’s Guide.
• Go to the training section and watch a video or two at
epson.com/brightlinkvideos (U.S.) or
epson.ca/brightlinkvideos (Canada).
• Pen calibration
• Finger touch calibration
3
Use the PC interactive features
• Interactive pens
• Finger touch
4
Use PC Free Annotation
5
Using the remote control
Annotate on images from document
cameras or other sources
•
•
BrightLink Interaction
The projector control toolbar lets you control the
projector from the screen just as you would using the
remote control.
Use pen and finger simultaneously
•
•
Save annotations
Command toolbar
Drawing toolbar
• Choosing the right tool
• Without a computer, you can use the toolbar that is
built into the projector (PC Free Annotation). This
lets you annotate images from a document camera,
tablet, DVD player, or other source connected to your
projector.
•
•Sign up for complimentary webinars
•Watch helpful how-to videos
Need help?
•Find out about cool, free interactive sites
Click the BrightLink Training Resources
link on your desktop or go to
www.epson.com/eduresources.
(U.S. and Canada only)
•
•
This software lets you use the interactive pen or your
finger as a mouse to annotate, save, and interact with
content from your computer.
2Calibrate
•
•
• With a computer, you can use Easy Interactive Tools.
software is installed
Annotate on white background
Use both pens simultaneously
The BrightLink interactive pens turn any wall or table into
an interactive area, with or without a computer.
1Connect your computer and make sure interactive
•
Stop video action
For more information on using the remote control and
cool time-saving buttons:
Follow the steps on this card to get started with your
BrightLink:
•
Zoom in and out
Page through
documents
Temporarily
turn off image
and sound
Start Here
Annotate on computer display
Enter
Calibrate
Use custom pen
If you already have annotation software, you can use
it with BrightLink. If you are using Microsoft® Office
2003 or later, you can also use the “inking tools” to add
handwritten notes to your documents and PowerPoint®
presentations.
Here are some tips on choosing among the tools that
came with your BrightLink projector:
Redo
Undo
Select the background
pattern*
Change custom pen
color and width
bottom of the toolbar.
Note: Many of the built-in tools are the same as Easy
Interactive Tools, but fewer functions are available.
Turn projector
on/off
whatever image is being projected.
Change highlighter color
2
Choosing the Right Tool
Remote Control
Easy Interactive Tools
1
Two different toolbars are available in PC Free Annotation
mode, one for annotation mode and one for whiteboard
annotation mode.
Built-In Toolbar
The projector’s built-in toolbar lets you annotate images
from other devices that have been connected to the
projector, such as a document camera, tablet, or other
source.
595Wi/595Wi+
5 Using the Remote Control
The Epson® PrivateLine® service is for you!
EPSON is a registered trademark and EPSON Exceed Your Vision is a registered
logomark of Seiko Epson Corporation. BrightLink and PrivateLine are registered
trademarks of Epson America, Inc.
All you have to do is call (800) 637-7661. This service is
available for the duration of your warranty period.
Mac, OS X, and iPad are trademarks of Apple Inc., registered in the U.S. and
other countries.
You may also speak with a projector support specialist by
dialing (562) 276-4394 (U.S) or (905) 709-3839 (Canada).
General Notice: Other product names used herein are for identification purposes
only and may be trademarks of their respective owners. Epson disclaims any and
all rights in those marks.
This information is subject to change without notice.
© 2014 Epson America, Inc., 2/14 Printed in XXXXXX
CPD-40733
Support hours are 6 AM to 8 PM, Pacific Time, Monday
through Friday and 7 AM to 4 PM, Pacific Time, Saturday.
Days and hours of support are subject to change without
notice. Toll or long distance charges may apply.
tudents and colleagues can connect their own
S
laptops and annotate on the fly using the built-in
toolbar, without installing software.
1 Connect Your Computer and Make Sure
Interactive Software Is Installed
2Calibrate
1
Calibration coordinates the position of the pen or your
finger with the location of your cursor. If the pen or
finger position and cursor location don’t match, you can
perform auto calibration, or you can calibrate manually
for even greater accuracy. You don’t need a computer,
and you won’t need to calibrate again unless the
projector or image is moved, or the image is resized.
2
urn on the projector by pressing the blue
T
button on the remote control.
power
onnect an HDMI or VGA cable from the projector to
C
your computer.
HDMI
VGA
3
onnect the USB cable from the projector’s USB
C
TypeB port directly to any available USB port on
your computer.
You may already have interactive software on your
computer, or you may need to install it. For
OS X, you need Easy Interactive Driver and Easy
Interactive Tools (or other interactive software). For
Windows, you only need Easy Interactive Tools (or other
interactive software).
Here’s how to find out if the Easy Interactive Tools (Ver.
3.00) software is installed on your computer:
If you are using a Mac: Look for the Easy Interactive
Driver and Easy Interactive Tools folders in the
Application folder on your hard drive. If you see these
folders, the Easy Interactive software is installed.
If you are using Windows:
Windows 8.x - Navigate to the Apps screen and select
Easy Interactive Tools Ver. 3.00.
All other versions - Select
or Start > All Programs
or Programs > EPSON Projector > Easy Interactive
Tools Ver. 3. If you see Easy Interactive Tools Ver. 3, the
software is installed.
4
The default language of the menu system is English.
5
To select another language, press the Menu button
on the remote control. Select Extended and press
. Select Language and press
. Select your
language and press
. Press the Menu button to
exit the menu system.
“EPSON Projector Software for Easy Interactive
Function”
• On a Mac, you may need to open System
• Try pressing the Source Search button on the
remote control.
Pen Calibration
pen calibration, press the User button on
1 Ttheo start
remote control.
2
hen you see the Auto Calibration screen, do one
W
of the following:
• Press
to run auto calibration, then wait until
calibration is complete.
• Select No, then press
and follow the steps
below to calibrate manually.
3
4
Select Manual Calibration, then press
5
.
When you see the Manual Calibration screen, press
to select Yes.
Touch the circles on the screen with your pen to
Finger Touch Calibration
o start finger touch calibration, press the User
1 Tbutton
on the remote control.
When you see the Auto Calibration screen, do one
2
of the following:
• Download the most up-to-date version from:
epson.com/brightlinkdownloads (U.S.)
epson.ca/brightlinkdownloads (Canada)
global.latin.epson.com/soporte (Latin America;
site available in Spanish)
or more information about Easy Interactive Tools, see
F
the online Easy Interactive Tool Tips sheet or the online
BrightLink User’s Guide.
Interactive Pens
Finger Touch
Your projector came with 2 pens that have different
colored ends, orange (Interactive Pen A) and blue
(Interactive Pen B). Make sure one AA battery is
installed in each pen.
You can use your finger to perform the same functions
as the interactive pen when the Touch Unit is installed.
You can use either the pen or your finger, or use both at
the same time.
Battery cover
• Press
When performing finger touch operations, you can use
two fingers in annotation and whiteboard annotation
modes.
•
Select No, then press
• To left-click, tap the board with your finger.
to run auto calibration, then wait until
calibration is complete.
and follow the steps
below to calibrate manually.
3
Select Installation Pattern and press
4
the on-screen instructions.
Select Touch Unit Setup, then press
5
6
Select Touch Calibration, then press
• To double-click, tap twice with your finger.
• To right-click, press the board with your finger for
.
about 3 seconds.
. Follow
.
When you see the Touch Calibration screen, press
to select Yes.
Pen tip
Battery
light
Button
• To turn on the pen, tap the pen tip or press the
button on the side of the pen. The green light comes
on briefly. If the battery is low, the light flashes.
• Hold the pen perpendicular to the board, as shown
below.
A green circle appears in the upper left corner of
your projected image.
7
perform manual calibration.
8
Continue until all of the circles disappear.
For more detailed instructions, see the online BrightLink
User’s Guide.
• To click and drag, press on and drag an item with
your finger.
• To scroll, drag your finger on the screen.
If your device supports these functions, you can also do
the following:
• To zoom in or out, touch an item using two fingers
and either move your fingers away from each other
(zoom out) or toward each other (zoom in).
• To rotate an image, touch the image with your fingers
and then rotate your hand.
ouch and hold the center of the circle with your
T
finger until the circle disappears and another one
appears.
Note: Make sure you touch the center of each
circle; otherwise the calibration may not be
accurate.
• On some Windows laptops, you may need to
Preferences and select Displays. Select the
display or Color LCD option if necessary, then
click the Arrange or Arrangement tab, and select
the Mirror Displays check box.
• Use the CD that came with the projector, labeled
isplay an image from your computer. If the image
D
doesn’t appear, try one of the following:
hold down the Fn key on the keyboard and press
F7 or the function key that lets you display on
an external monitor. It may have an icon such as
, or it may be labelled CRT/LCD.
If the software is not installed, do one of the following to
install it:
3 Using the Interactive Features
• To drag up or down on a page, or move backward or
• To left-click, tap on the board.
• To double-click, tap twice.
• To right-click, press the button on the side of the
pen.
• To click and drag, tap and drag with the pen.
• To move the cursor, hover over the board without
touching it.
• When you are finished using the pen, simply place it
in an area away from the projection screen.
Note: The pens turn off automatically after about
20 minutes of inactivity. Tap the pen tip or press the
button on the side to turn the pen back on. Ready
forward in a browser window, use swiping gestures
or flicks.
See the online BrightLink User’s Guide for more
information.
1 Connect Your Computer and Make Sure
Interactive Software Is Installed
2Calibrate
1
Calibration coordinates the position of the pen or your
finger with the location of your cursor. If the pen or
finger position and cursor location don’t match, you can
perform auto calibration, or you can calibrate manually
for even greater accuracy. You don’t need a computer,
and you won’t need to calibrate again unless the
projector or image is moved, or the image is resized.
2
urn on the projector by pressing the blue
T
button on the remote control.
power
onnect an HDMI or VGA cable from the projector to
C
your computer.
HDMI
VGA
3
onnect the USB cable from the projector’s USB
C
TypeB port directly to any available USB port on
your computer.
You may already have interactive software on your
computer, or you may need to install it. For
OS X, you need Easy Interactive Driver and Easy
Interactive Tools (or other interactive software). For
Windows, you only need Easy Interactive Tools (or other
interactive software).
Here’s how to find out if the Easy Interactive Tools (Ver.
3.00) software is installed on your computer:
If you are using a Mac: Look for the Easy Interactive
Driver and Easy Interactive Tools folders in the
Application folder on your hard drive. If you see these
folders, the Easy Interactive software is installed.
If you are using Windows:
Windows 8.x - Navigate to the Apps screen and select
Easy Interactive Tools Ver. 3.00.
All other versions - Select
or Start > All Programs
or Programs > EPSON Projector > Easy Interactive
Tools Ver. 3. If you see Easy Interactive Tools Ver. 3, the
software is installed.
4
The default language of the menu system is English.
5
To select another language, press the Menu button
on the remote control. Select Extended and press
. Select Language and press
. Select your
language and press
. Press the Menu button to
exit the menu system.
“EPSON Projector Software for Easy Interactive
Function”
• On a Mac, you may need to open System
• Try pressing the Source Search button on the
remote control.
Pen Calibration
pen calibration, press the User button on
1 Ttheo start
remote control.
2
hen you see the Auto Calibration screen, do one
W
of the following:
• Press
to run auto calibration, then wait until
calibration is complete.
• Select No, then press
and follow the steps
below to calibrate manually.
3
4
Select Manual Calibration, then press
5
.
When you see the Manual Calibration screen, press
to select Yes.
Touch the circles on the screen with your pen to
Finger Touch Calibration
o start finger touch calibration, press the User
1 Tbutton
on the remote control.
When you see the Auto Calibration screen, do one
2
of the following:
• Download the most up-to-date version from:
epson.com/brightlinkdownloads (U.S.)
epson.ca/brightlinkdownloads (Canada)
global.latin.epson.com/soporte (Latin America;
site available in Spanish)
or more information about Easy Interactive Tools, see
F
the online Easy Interactive Tool Tips sheet or the online
BrightLink User’s Guide.
Interactive Pens
Finger Touch
Your projector came with 2 pens that have different
colored ends, orange (Interactive Pen A) and blue
(Interactive Pen B). Make sure one AA battery is
installed in each pen.
You can use your finger to perform the same functions
as the interactive pen when the Touch Unit is installed.
You can use either the pen or your finger, or use both at
the same time.
Battery cover
• Press
When performing finger touch operations, you can use
two fingers in annotation and whiteboard annotation
modes.
•
Select No, then press
• To left-click, tap the board with your finger.
to run auto calibration, then wait until
calibration is complete.
and follow the steps
below to calibrate manually.
3
Select Installation Pattern and press
4
the on-screen instructions.
Select Touch Unit Setup, then press
5
6
Select Touch Calibration, then press
• To double-click, tap twice with your finger.
• To right-click, press the board with your finger for
.
about 3 seconds.
. Follow
.
When you see the Touch Calibration screen, press
to select Yes.
Pen tip
Battery
light
Button
• To turn on the pen, tap the pen tip or press the
button on the side of the pen. The green light comes
on briefly. If the battery is low, the light flashes.
• Hold the pen perpendicular to the board, as shown
below.
A green circle appears in the upper left corner of
your projected image.
7
perform manual calibration.
8
Continue until all of the circles disappear.
For more detailed instructions, see the online BrightLink
User’s Guide.
• To click and drag, press on and drag an item with
your finger.
• To scroll, drag your finger on the screen.
If your device supports these functions, you can also do
the following:
• To zoom in or out, touch an item using two fingers
and either move your fingers away from each other
(zoom out) or toward each other (zoom in).
• To rotate an image, touch the image with your fingers
and then rotate your hand.
ouch and hold the center of the circle with your
T
finger until the circle disappears and another one
appears.
Note: Make sure you touch the center of each
circle; otherwise the calibration may not be
accurate.
• On some Windows laptops, you may need to
Preferences and select Displays. Select the
display or Color LCD option if necessary, then
click the Arrange or Arrangement tab, and select
the Mirror Displays check box.
• Use the CD that came with the projector, labeled
isplay an image from your computer. If the image
D
doesn’t appear, try one of the following:
hold down the Fn key on the keyboard and press
F7 or the function key that lets you display on
an external monitor. It may have an icon such as
, or it may be labelled CRT/LCD.
If the software is not installed, do one of the following to
install it:
3 Using the Interactive Features
• To drag up or down on a page, or move backward or
• To left-click, tap on the board.
• To double-click, tap twice.
• To right-click, press the button on the side of the
pen.
• To click and drag, tap and drag with the pen.
• To move the cursor, hover over the board without
touching it.
• When you are finished using the pen, simply place it
in an area away from the projection screen.
Note: The pens turn off automatically after about
20 minutes of inactivity. Tap the pen tip or press the
button on the side to turn the pen back on. Ready
forward in a browser window, use swiping gestures
or flicks.
See the online BrightLink User’s Guide for more
information.
1 Connect Your Computer and Make Sure
Interactive Software Is Installed
2Calibrate
1
Calibration coordinates the position of the pen or your
finger with the location of your cursor. If the pen or
finger position and cursor location don’t match, you can
perform auto calibration, or you can calibrate manually
for even greater accuracy. You don’t need a computer,
and you won’t need to calibrate again unless the
projector or image is moved, or the image is resized.
2
urn on the projector by pressing the blue
T
button on the remote control.
power
onnect an HDMI or VGA cable from the projector to
C
your computer.
HDMI
VGA
3
onnect the USB cable from the projector’s USB
C
TypeB port directly to any available USB port on
your computer.
You may already have interactive software on your
computer, or you may need to install it. For
OS X, you need Easy Interactive Driver and Easy
Interactive Tools (or other interactive software). For
Windows, you only need Easy Interactive Tools (or other
interactive software).
Here’s how to find out if the Easy Interactive Tools (Ver.
3.00) software is installed on your computer:
If you are using a Mac: Look for the Easy Interactive
Driver and Easy Interactive Tools folders in the
Application folder on your hard drive. If you see these
folders, the Easy Interactive software is installed.
If you are using Windows:
Windows 8.x - Navigate to the Apps screen and select
Easy Interactive Tools Ver. 3.00.
All other versions - Select
or Start > All Programs
or Programs > EPSON Projector > Easy Interactive
Tools Ver. 3. If you see Easy Interactive Tools Ver. 3, the
software is installed.
4
The default language of the menu system is English.
5
To select another language, press the Menu button
on the remote control. Select Extended and press
. Select Language and press
. Select your
language and press
. Press the Menu button to
exit the menu system.
“EPSON Projector Software for Easy Interactive
Function”
• On a Mac, you may need to open System
• Try pressing the Source Search button on the
remote control.
Pen Calibration
pen calibration, press the User button on
1 Ttheo start
remote control.
2
hen you see the Auto Calibration screen, do one
W
of the following:
• Press
to run auto calibration, then wait until
calibration is complete.
• Select No, then press
and follow the steps
below to calibrate manually.
3
4
Select Manual Calibration, then press
5
.
When you see the Manual Calibration screen, press
to select Yes.
Touch the circles on the screen with your pen to
Finger Touch Calibration
o start finger touch calibration, press the User
1 Tbutton
on the remote control.
When you see the Auto Calibration screen, do one
2
of the following:
• Download the most up-to-date version from:
epson.com/brightlinkdownloads (U.S.)
epson.ca/brightlinkdownloads (Canada)
global.latin.epson.com/soporte (Latin America;
site available in Spanish)
or more information about Easy Interactive Tools, see
F
the online Easy Interactive Tool Tips sheet or the online
BrightLink User’s Guide.
Interactive Pens
Finger Touch
Your projector came with 2 pens that have different
colored ends, orange (Interactive Pen A) and blue
(Interactive Pen B). Make sure one AA battery is
installed in each pen.
You can use your finger to perform the same functions
as the interactive pen when the Touch Unit is installed.
You can use either the pen or your finger, or use both at
the same time.
Battery cover
• Press
When performing finger touch operations, you can use
two fingers in annotation and whiteboard annotation
modes.
•
Select No, then press
• To left-click, tap the board with your finger.
to run auto calibration, then wait until
calibration is complete.
and follow the steps
below to calibrate manually.
3
Select Installation Pattern and press
4
the on-screen instructions.
Select Touch Unit Setup, then press
5
6
Select Touch Calibration, then press
• To double-click, tap twice with your finger.
• To right-click, press the board with your finger for
.
about 3 seconds.
. Follow
.
When you see the Touch Calibration screen, press
to select Yes.
Pen tip
Battery
light
Button
• To turn on the pen, tap the pen tip or press the
button on the side of the pen. The green light comes
on briefly. If the battery is low, the light flashes.
• Hold the pen perpendicular to the board, as shown
below.
A green circle appears in the upper left corner of
your projected image.
7
perform manual calibration.
8
Continue until all of the circles disappear.
For more detailed instructions, see the online BrightLink
User’s Guide.
• To click and drag, press on and drag an item with
your finger.
• To scroll, drag your finger on the screen.
If your device supports these functions, you can also do
the following:
• To zoom in or out, touch an item using two fingers
and either move your fingers away from each other
(zoom out) or toward each other (zoom in).
• To rotate an image, touch the image with your fingers
and then rotate your hand.
ouch and hold the center of the circle with your
T
finger until the circle disappears and another one
appears.
Note: Make sure you touch the center of each
circle; otherwise the calibration may not be
accurate.
• On some Windows laptops, you may need to
Preferences and select Displays. Select the
display or Color LCD option if necessary, then
click the Arrange or Arrangement tab, and select
the Mirror Displays check box.
• Use the CD that came with the projector, labeled
isplay an image from your computer. If the image
D
doesn’t appear, try one of the following:
hold down the Fn key on the keyboard and press
F7 or the function key that lets you display on
an external monitor. It may have an icon such as
, or it may be labelled CRT/LCD.
If the software is not installed, do one of the following to
install it:
3 Using the Interactive Features
• To drag up or down on a page, or move backward or
• To left-click, tap on the board.
• To double-click, tap twice.
• To right-click, press the button on the side of the
pen.
• To click and drag, tap and drag with the pen.
• To move the cursor, hover over the board without
touching it.
• When you are finished using the pen, simply place it
in an area away from the projection screen.
Note: The pens turn off automatically after about
20 minutes of inactivity. Tap the pen tip or press the
button on the side to turn the pen back on. Ready
forward in a browser window, use swiping gestures
or flicks.
See the online BrightLink User’s Guide for more
information.
4 Use PC Free Annotation
ress one of the source buttons on the remote
P
control to select the source for the image you want
to annotate.
Image from a
computer connected
to the Computer1
or Computer2 port
Image from a computer with
an HDMI connection, or a
video player
Image from an
external device
connected to the
USB port
Image from a computer or
iPad connected through a
wired or wireless network
• Annotation mode displays the built-in toolbar on
o activate the toolbar, tap the board with the pen or
T
your finger. If you don’t see the
icon, tap the
icon and then tap the
icon.
ote: If you only see the
N
PC Free Annotation mode.
3
icon, you are already in
To close the toolbar, select the
icon at the
• Whiteboard annotation mode lets you project a white
Select from various
image sources
connected to the
projector
or black screen or background pattern, and use the
pen or your finger to write or draw as you would on a
chalkboard or dry erase board.
Select whiteboard
annotation mode
Select annotation mode
Use highlighter
Use black, red, or blue
pen—select small dot
for thin line
Use black, red, or blue
pen—select large dot
for thick line
Erase—select small dot
for thin eraser
Erase—select large dot
for thick eraser
Hide toolbar after each
annotation
Clear all annotations
* In annotation mode, the
Access menu
system for
additional
adjustments
Close toolbar
select background tool does not appear.
Ready to Learn More?
Switch between PC
Interactive and PC
Free Annotation
• See the online BrightLink User’s Guide.
• Go to the training section and watch a video or two at
epson.com/brightlinkvideos (U.S.) or
epson.ca/brightlinkvideos (Canada).
• Pen calibration
• Finger touch calibration
3
Use the PC interactive features
• Interactive pens
• Finger touch
4
Use PC Free Annotation
5
Using the remote control
Annotate on images from document
cameras or other sources
•
•
BrightLink Interaction
The projector control toolbar lets you control the
projector from the screen just as you would using the
remote control.
Use pen and finger simultaneously
•
•
Save annotations
Command toolbar
Drawing toolbar
• Choosing the right tool
• Without a computer, you can use the toolbar that is
built into the projector (PC Free Annotation). This
lets you annotate images from a document camera,
tablet, DVD player, or other source connected to your
projector.
•
•Sign up for complimentary webinars
•Watch helpful how-to videos
Need help?
•Find out about cool, free interactive sites
Click the BrightLink Training Resources
link on your desktop or go to
www.epson.com/eduresources.
(U.S. and Canada only)
•
•
This software lets you use the interactive pen or your
finger as a mouse to annotate, save, and interact with
content from your computer.
2Calibrate
•
•
• With a computer, you can use Easy Interactive Tools.
software is installed
Annotate on white background
Use both pens simultaneously
The BrightLink interactive pens turn any wall or table into
an interactive area, with or without a computer.
1Connect your computer and make sure interactive
•
Stop video action
For more information on using the remote control and
cool time-saving buttons:
Follow the steps on this card to get started with your
BrightLink:
•
Zoom in and out
Page through
documents
Temporarily
turn off image
and sound
Start Here
Annotate on computer display
Enter
Calibrate
Use custom pen
If you already have annotation software, you can use
it with BrightLink. If you are using Microsoft® Office
2003 or later, you can also use the “inking tools” to add
handwritten notes to your documents and PowerPoint®
presentations.
Here are some tips on choosing among the tools that
came with your BrightLink projector:
Redo
Undo
Select the background
pattern*
Change custom pen
color and width
bottom of the toolbar.
Note: Many of the built-in tools are the same as Easy
Interactive Tools, but fewer functions are available.
Turn projector
on/off
whatever image is being projected.
Change highlighter color
2
Choosing the Right Tool
Remote Control
Easy Interactive Tools
1
Two different toolbars are available in PC Free Annotation
mode, one for annotation mode and one for whiteboard
annotation mode.
Built-In Toolbar
The projector’s built-in toolbar lets you annotate images
from other devices that have been connected to the
projector, such as a document camera, tablet, or other
source.
595Wi/595Wi+
5 Using the Remote Control
The Epson® PrivateLine® service is for you!
EPSON is a registered trademark and EPSON Exceed Your Vision is a registered
logomark of Seiko Epson Corporation. BrightLink and PrivateLine are registered
trademarks of Epson America, Inc.
All you have to do is call (800) 637-7661. This service is
available for the duration of your warranty period.
Mac, OS X, and iPad are trademarks of Apple Inc., registered in the U.S. and
other countries.
You may also speak with a projector support specialist by
dialing (562) 276-4394 (U.S) or (905) 709-3839 (Canada).
General Notice: Other product names used herein are for identification purposes
only and may be trademarks of their respective owners. Epson disclaims any and
all rights in those marks.
This information is subject to change without notice.
© 2014 Epson America, Inc., 2/14 Printed in XXXXXX
CPD-40733
Support hours are 6 AM to 8 PM, Pacific Time, Monday
through Friday and 7 AM to 4 PM, Pacific Time, Saturday.
Days and hours of support are subject to change without
notice. Toll or long distance charges may apply.
tudents and colleagues can connect their own
S
laptops and annotate on the fly using the built-in
toolbar, without installing software.
4 Use PC Free Annotation
ress one of the source buttons on the remote
P
control to select the source for the image you want
to annotate.
Image from a
computer connected
to the Computer1
or Computer2 port
Image from a computer with
an HDMI connection, or a
video player
Image from an
external device
connected to the
USB port
Image from a computer or
iPad connected through a
wired or wireless network
• Annotation mode displays the built-in toolbar on
o activate the toolbar, tap the board with the pen or
T
your finger. If you don’t see the
icon, tap the
icon and then tap the
icon.
ote: If you only see the
N
PC Free Annotation mode.
3
icon, you are already in
To close the toolbar, select the
icon at the
• Whiteboard annotation mode lets you project a white
Select from various
image sources
connected to the
projector
or black screen or background pattern, and use the
pen or your finger to write or draw as you would on a
chalkboard or dry erase board.
Select whiteboard
annotation mode
Select annotation mode
Use highlighter
Use black, red, or blue
pen—select small dot
for thin line
Use black, red, or blue
pen—select large dot
for thick line
Erase—select small dot
for thin eraser
Erase—select large dot
for thick eraser
Hide toolbar after each
annotation
Clear all annotations
* In annotation mode, the
Access menu
system for
additional
adjustments
Close toolbar
select background tool does not appear.
Ready to Learn More?
Switch between PC
Interactive and PC
Free Annotation
• See the online BrightLink User’s Guide.
• Go to the training section and watch a video or two at
epson.com/brightlinkvideos (U.S.) or
epson.ca/brightlinkvideos (Canada).
• Pen calibration
• Finger touch calibration
3
Use the PC interactive features
• Interactive pens
• Finger touch
4
Use PC Free Annotation
5
Using the remote control
Annotate on images from document
cameras or other sources
•
•
BrightLink Interaction
The projector control toolbar lets you control the
projector from the screen just as you would using the
remote control.
Use pen and finger simultaneously
•
•
Save annotations
Command toolbar
Drawing toolbar
• Choosing the right tool
• Without a computer, you can use the toolbar that is
built into the projector (PC Free Annotation). This
lets you annotate images from a document camera,
tablet, DVD player, or other source connected to your
projector.
•
•Sign up for complimentary webinars
•Watch helpful how-to videos
Need help?
•Find out about cool, free interactive sites
Click the BrightLink Training Resources
link on your desktop or go to
www.epson.com/eduresources.
(U.S. and Canada only)
•
•
This software lets you use the interactive pen or your
finger as a mouse to annotate, save, and interact with
content from your computer.
2Calibrate
•
•
• With a computer, you can use Easy Interactive Tools.
software is installed
Annotate on white background
Use both pens simultaneously
The BrightLink interactive pens turn any wall or table into
an interactive area, with or without a computer.
1Connect your computer and make sure interactive
•
Stop video action
For more information on using the remote control and
cool time-saving buttons:
Follow the steps on this card to get started with your
BrightLink:
•
Zoom in and out
Page through
documents
Temporarily
turn off image
and sound
Start Here
Annotate on computer display
Enter
Calibrate
Use custom pen
If you already have annotation software, you can use
it with BrightLink. If you are using Microsoft® Office
2003 or later, you can also use the “inking tools” to add
handwritten notes to your documents and PowerPoint®
presentations.
Here are some tips on choosing among the tools that
came with your BrightLink projector:
Redo
Undo
Select the background
pattern*
Change custom pen
color and width
bottom of the toolbar.
Note: Many of the built-in tools are the same as Easy
Interactive Tools, but fewer functions are available.
Turn projector
on/off
whatever image is being projected.
Change highlighter color
2
Choosing the Right Tool
Remote Control
Easy Interactive Tools
1
Two different toolbars are available in PC Free Annotation
mode, one for annotation mode and one for whiteboard
annotation mode.
Built-In Toolbar
The projector’s built-in toolbar lets you annotate images
from other devices that have been connected to the
projector, such as a document camera, tablet, or other
source.
595Wi/595Wi+
5 Using the Remote Control
The Epson® PrivateLine® service is for you!
EPSON is a registered trademark and EPSON Exceed Your Vision is a registered
logomark of Seiko Epson Corporation. BrightLink and PrivateLine are registered
trademarks of Epson America, Inc.
All you have to do is call (800) 637-7661. This service is
available for the duration of your warranty period.
Mac, OS X, and iPad are trademarks of Apple Inc., registered in the U.S. and
other countries.
You may also speak with a projector support specialist by
dialing (562) 276-4394 (U.S) or (905) 709-3839 (Canada).
General Notice: Other product names used herein are for identification purposes
only and may be trademarks of their respective owners. Epson disclaims any and
all rights in those marks.
This information is subject to change without notice.
© 2014 Epson America, Inc., 2/14 Printed in XXXXXX
CPD-40733
Support hours are 6 AM to 8 PM, Pacific Time, Monday
through Friday and 7 AM to 4 PM, Pacific Time, Saturday.
Days and hours of support are subject to change without
notice. Toll or long distance charges may apply.
tudents and colleagues can connect their own
S
laptops and annotate on the fly using the built-in
toolbar, without installing software.
Download PDF

advertising