Epson | DW130 | User's Manual | Epson DW130 User's Manual

W130
5/17/02
3:26 PM
Page 2
(Black plate)
ial Tool Company, 626 Hanover Pike, P.O. Box 158, Hampstead, MD 21074
Printed in U.S.A. (MAY95-CD-6) Form No. 158673-02
or information call toll free between 8:00 a.m. and 8:00 p.m., seven days a week. 1-800-4-DEWALT (1-800-433-9258)
Copyright 1993, 1995
INSTRUCTION MANUAL
DW130 1/2" Drill
W130
5/17/02
3:26 PM
Page 4
(Black plate)
ANY QUESTIONS OR COMMENTS
R ANY DEWALT TOOL, CALL US
1-800-4-DEWALT (1-800-433-9258).
m Nameplate
SIDE HANDLE
Date of Purchase
ormation for future reference.
Important Safety Instructions
Safety Instructions For All T
WARNING: When using electric tools, basic safety
precautions should always be followed to reduce risk of fire,
electric shock, and personal injury, including the following:
• KEEP WORK AREA CLEAN. Cluttered ar
benches invite injuries.
• CONSIDER WORK AREA ENVIRONMEN
expose power tools to rain. Don’t use power tools
or wet locations. Keep work area well lit. Do not u
presence of flammable liquids or gases.
• GUARD AGAINST ELECTRIC SHOCK. Prev
contact with grounded surfaces. For exampl
radiators, ranges, and refrigerator enclosures.
• KEEP CHILDREN AWAY. Do not let visitors co
or extension cord. All visitors should be kept a
work area.
• STORE IDLE TOOLS. When not in use, tools s
stored in dry, and high or locked-up place — ou
of children.
• DON’T FORCE TOOL. It will do the job better an
the rate for which it was intended.
• USE RIGHT TOOL. Don’t force small tool or attac
do the job of a heavy-duty tool. Don’t use tool fo
not intended.
• DRESS PROPERLY. Do not wear loose clo
jewelry. They can be caught in moving parts
gloves and non-skid footwear are recommend
working outdoors. Wear protective hair covering t
long hair.
• USE SAFETY GLASSES. Also use face or dus
operation is dusty.
• DON’T ABUSE CORD. Never carry tool by cord
to disconnect from receptacle. Keep cord from
and sharp edges.
READ ALL INSTRUCTIONS
Double Insulation
CHUCK
ROCKER
SWITCH
…BUILT JOBSITE TOUGH
formance industrial tools are made for America‘s
al and construction applications. The design of every
from drills to sanders to grinders – is the result of
jobsites and throughout industry. Each tool is
ainstaking precision using advanced manufacturing
nse quality control. Every tool is checked before it
ry to make sure that it meets your standards for
y and power.
t Jobsite Tough…WE GUARANTEE IT.
MULTI-POSITION
SPADE HANDLE
R
F
BRUSH
SYSTEM
Double insulated tools are constructed throughout with two
separate layers of electrical insulation or one double
thickness of insulation between you and the tool’s electrical
system. Tools built with this insulation system are not
intended to be grounded. As a result, your tool is equipped
with a two prong plug which permits you to use extension
cords without concern for maintaining a ground connection.
NOTE: Double insulation does not take the place of normal
safety precautions when operating this tool. The insulation
system is for added protection against injury resulting from a
possible electrical insulation failure within the tool.
CAUTION: WHEN SERVICING USE ONLY IDENTICAL
REPLACEMENT PARTS. Repair or replace damaged cords.
Polarized Plugs
Polarized plugs (one blade is wider than the other) are used
on equipment to reduce the risk of electric shock. When
provided, this plug will fit in the polarized outlet only one way.
If the plug does not fit fully into the outlet, reverse the plug. If
it still does not fit, contact a qualified electrician to install the
proper outlet. Do not change the plug in any way.
1
W130
5/17/02
3:26 PM
Page 6
(Black plate)
ORK. Use clamps or a vise to hold work. It’s safer
ur hand and it frees both hands to operate tool.
RREACH. Keep proper footing and balance at all
• OUTDOOR USE EXTENSION CORDS. When tool is used
outdoors, use only extension cords intended for use outdoors
and so marked.
• STAY ALERT. Watch what you are doing. Use common sense.
Do not operate tool when you are tired.
• CHECK DAMAGED PARTS. Before further use of the tool, a
guard or other part that is damaged should be carefully checked
to determine that it will operate properly and perform its intended
function. Check for alignment of moving parts, binding of moving
parts, breakage of parts, mounting, and any other conditions that
may affect its operation. A guard or other part that is damaged
should be properly repaired or replaced by an authorized service
center unless otherwise indicated elsewhere in this instruction
manual. Have defective switches replaced by authorized service
center. Do not use tool if switch does not turn it on and off.
• CAUTION: When drilling or driving into walls, floors or wherever
live electrical wires may be encountered, DO NOT TOUCH ANY
METAL PARTS OF THE TOOL! Hold the tool only by insulated
grasping surfaces to prevent electric shock if you drill or drive into
a live wire.
OOLS WITH CARE. Keep tools sharp and clean for
er performance. Follow instructions for lubricating
accessories. Inspect tool cords periodically and if
ve repaired by authorized service facility. Inspect
rds periodically and replace if damaged. Keep
lean, and free from oil and grease.
T OR LOCK OFF TOOLS when not in use, before
when changing accessories, such as blades, bits,
JUSTING KEYS AND WRENCHES. Form habit of
ee that keys and adjusting wrenches are removed
re turning it on.
NTENTIONAL STARTING. Don’t carry tool with
ch. Be sure switch is off when plugging in.
CORDS. Make sure your extension cord is in good
hen using an extension cord, be sure to use one
h to carry the current your product will draw. An
rd will cause a drop in line voltage resulting in loss
overheating. The following table shows the correct
epending on cord length and nameplate ampere
oubt, use the next heavier gage. The smaller the
the heavier the cord.
Minimum Gage for Cord Sets
Total Length of Cord in Feet
0-25
26-50
51-100
0-50
51-100
101-200
Rating
Not more
Than
6
10
12
16
16
16
16
12
Switch:
(Fig. 1)
This spade handle can be attached either horizontally or vertically.
Place the handle into the locating boss on the back of the drill and
assemble with holding knob.
Side Handle
(Fig. 2)
Pressing the TOP part of the switch runs the tool in a re
Pressing the BOTTOM part of the switch runs the to
direction. Always let the motor stop completely be
direction.
To lock trigger in “FORWARD” position, depress LOWE
and push up lock button “B”. Then, while holding lock bu
gently release trigger. To release locking mechanism,
fully, then release it.
NOTE: Locking mechanism will not function if upper p
depressed (reverse operation).
The locking feature is for use when the drill is mounted in
otherwise firmly held...NOT BY HAND.
Do not lock the switch “ON” when drilling by hand s
instantly release the trigger switch if the bit binds in the h
Be sure to release the switch locking button before dis
plug from the power supply. Failure to do so will cause
immediately the next time it is plugged in. Damage
result.
(Fig. 1)
The side handle can be placed in either side of the drill or the top of the
drill according to operator preference and available working clearance.
The spade handle can be temporarily removed if working clearance at
rear of tool is limited. Always replace spade handle when possible.
CAUTION: Always use the side handle and switch handle. This is a
high-torque drill. Always hold it firmly with both hands when operating.
SAVE THESE INSTRUCTIONS
Motor Brushes
Be sure tool is unplugged before inspecting brushes. To inspect brushes,
unscrew the plastic brush inspection caps (located in the sides of the
motor housing) and withdraw the brush assemblies from the tool.
Keep brushes clean and sliding freely in their guides. Carbon brushes
have varying symbols stamped into them, and if the brush is worn down
to a point where the symbol is not visible, they must be replaced. New
brush assemblies are available at Service Centers; see TOOLS,
ELECTRIC in the Yellow Pages.
NOTE: This tool is designed to automatically turn itself off when the
brushes are worn out.
101-150
201-300
AWG
18
18
16
14
Spade Handle Assembly:
16
14
14
12
14
12
Not Recommended
2
REVERSE
FORWARD
TRIGGER SWITCH
FIG. 1
LOCK BUTTON “B”
3
R
F
W130
5/17/02
3:26 PM
Page 8
(Black plate)
Drilling in Wood
Chuck Removal
Holes in wood can be made with the same twist drills used for metal.
These bits may overheat unless pulled out frequently to clear chips
from the flutes. For larger holes, use power drill wood bits. Work that is
apt to splinter should be backed up with a block of wood.
lug the drill when attaching or changing bits or
ill bits only. For WOOD, use twist drill bits, spade bits,
bits, or hole saws. For METAL, use high-speed steel
or hole saws. For MASONRY, such as brick, cement,
etc., use carbide-tipped bits.
material to be drilled is anchored or clamped firmly. If
material, use a wood “back-up” block to prevent
e material.
y pressure in a straight line with the bit. Use enough
eep drill biting, but do not push hard enough to stall
deflect the bit.
ide handle and switch handle.
TALLS, it is usually because it is being overloaded or
sed. RELEASE TRIGGER IMMEDIATELY, remove
work, and determine cause of stalling. DO NOT
GER OFF AND ON IN AN ATTEMPT TO START A
RILL - THIS CAN DAMAGE THE DRILL.
stalling or breaking through the material, reduce
drill and ease the bit through last fractional part of the
Drilling in Masonry
Use carbide tipped masonry bits at low speeds. Keep even force on the
drill but not so much that you crack the brittle materials. A smooth, even
flow of dust indicates the proper drilling rate.
Accessories
(Figures 7 & 8)
Recommended accessories for use with your tool are av
cost from your local service center. CAUTION: The u
recommended accessory may be hazardous.
A complete listing of service centers is included with you
If you need any assistance in locating any accessory,
DeWalt Industrial Tool Company, P.O. Box 158, 626
Hampstead, MD 21074 or call 1-800-4-DEWALT (1-800
1. Place chuck key in chuck as shown in Figure 7. Using a wooden
mallet or similar object, strike key sharply in a CLOCKWISE
direction. This will loosen screw inside chuck.
2. Open chuck jaws fully. Insert screwdriver into front of chuck
between jaws to engage screw head. Remove screw by turning
clockwise (left-hand thread).
3. Place key in chuck as shown in Figure 8. Using a wooden mallet
or similar object, strike key sharply in a COUNTERCLOCKWISE
direction. This will loosen chuck so that it can be unscrewed
by hand.
Maximum Recommended Capa
BITS, METAL DRILLING
WOOD, FLAT BORING
BITS, MASONRY DRILLING
HOLE SAWS
WIRE WHEEL BRUSHES
WIRE CUP BRUSH
BUFFING WHEELS
RUBBER BACKING PADS
Chuck Key Holder
1. Push double-hole end of holder through slot in other end of holder.
(Figure 3).
2. Slip loop over electric plug and draw loop tight around cord
(Figure 4).
3. Push ends of chuck key handle through two holes in end of holder
(Figure 6).
1
11
3
4
4
3
3
45
FIG. 4
Important
FIG. 7
To assure product SAFETY and RELIABILITY, repairs
and adjustment should be performed by Black & Dec
Industrial Service Centers or other qualified service
These service organizations service DeWalt tools alway
replacement parts.
FIG. 8
Lubrication
tor running when pulling the bit back out of a drilled
l help prevent jamming.
Metal
ricant when drilling metals. The exceptions are cast
hich should be drilled dry. The cutting lubricants that
phurized cutting oil or lard oil; bacon grease will also
.
FIG. 3
FIG. 5
4
FIG. 6
All ball bearings used are factory lubricated to last the life of the
bearings. All needle bearings used receive their lubrication from the
grease in the gear case. Clean and re-lubricate gear case yearly or
whenever servicing requires the gear case to be removed. Use type
and quantity of grease shown on Parts Bulletin packed with your tool.
Gear case is removed by removing the three screws from the front of
the tool. If the chuck is too large to permit removal of the two top screws,
see instructions for chuck removal.
DeWalt tools are serviced by the Industrial Tool Divis
Decker (U.S.) Inc.
5
W130
5/17/02
3:26 PM
Page 10
(Black plate)
YOUR DEWALT TOOLS MAY BE SERVICED AT THE FOLLOWING B&D SERVICE CENTERS.
nty
ALABAMA:
Birmingham 35209, 2412 Green Springs Hwy. . . . . . . . . . . . . . . . 205-942-0538
Mobile 36608, 3831 Airport Blvd. . . . . . . . . . . . . . . . . . . . . . . . . . 205-343-6624
ALASKA:
Anchorage 99518, 910 West International Airport Rd. . . . . . . . . . 907-563-4664
ARIZONA:
Mesa 85202, 535 S. Dobson, Suite 7. . . . . . . . . . . . . . . . . . . . . . 602-461-1074
Phoenix 85013, 4501 N. 7th Avenue . . . . . . . . . . . . . . . . . . . . . . 602-279-6414
Tucson 85712, 4845 E. Speedway Blvd. . . . . . . . . . . . . . . . . . . . 602-323-3388
ARKANSAS:
Little Rock 72201, 519 W. Seventh St. . . . . . . . . . . . . . . . . . . . . . 501-372-3040
CALIFORNIA:
Anaheim 92806, 540 South State College Blvd.. . . . . . . . . . . . . . 714-772-4050
Chula Vista 91910, 309 Broadway . . . . . . . . . . . . . . . . . . . . . . . . 619-420-6350
Concord 94520, 1500 Monument Blvd., #C2 . . . . . . . . . . . . . . . . 510-682-4880
Fresno 93710, 5412 North Blackstone Ave. . . . . . . . . . . . . . . . . . 209-435-0810
Long Beach 90805, 2011 South St. . . . . . . . . . . . . . . . . . . . . . . . 310-422-5825
Los Angeles 90040, 4820 South Eastern Ave., Suite “L” . . . . . . . 213-720-1834
Riverside 92506, 6215 Magnolia Ave., Suite “B” . . . . . . . . . . . . . 909-787-9700
Sacramento 95825, 2033 Fulton Ave. . . . . . . . . . . . . . . . . . . . . . 916-972-9090
San Diego 92123, 9270 Clairemont Mesa Blvd.. . . . . . . . . . . . . . 619-279-2011
San Jose 95128, 1185 So. Bascom Ave. . . . . . . . . . . . . . . . . . . . 408-293-7350
San Leandro 94578, 15206 E. 14th St. . . . . . . . . . . . . . . . . . . . . 510-276-1610
Van Nuys 91411, 14920 Victory Blvd. . . . . . . . . . . . . . . . . . . . . . 818-787-5531
COLORADO:
Denver 80219, 1171 S. Federal Blvd.. . . . . . . . . . . . . . . . . . . . . . 303-922-8325
CONNECTICUT:
Orange 06477, 481 Boston Post Rd. . . . . . . . . . . . . . . . . . . . . . . 203-795-3583
Wethersfield (Hartford) 06109, 662 Silas Dean Hwy. . . . . . . . . . . 203-563-5800
DISTRICT OF COLUMBIA: Washington
Colmar Manor 20722, 4153 Bladensburg Rd. . . . . . . . . . . . . . . . 301-779-3808
Falls Church, VA 22046, 344 W. Broad St. . . . . . . . . . . . . . . . . . 703-533-7313
FLORIDA:
Ft. Lauderdale 33334, 799 E. Oakland Pk. Blvd. . . . . . . . . . . . . . 305-566-5102
Ft. Myers 33907, 5224 Bank Street . . . . . . . . . . . . . . . . . . . . . . . 813-278-1188
Jacksonville 32205, 920 Cassat Ave. . . . . . . . . . . . . . . . . . . . . . . 904-781-2253
Miami (North) 33168, 13345 N.W. Seventh Ave. . . . . . . . . . . . . . 305-681-6658
Miami (South) 33156, 12233 So. Dixie Hwy. . . . . . . . . . . . . . . . . 305-232-9497
Orlando 32803, 3807 E. Colonial Dr. . . . . . . . . . . . . . . . . . . . . . . 407-894-7011
St. Petersburg 33709, 5635 49th St., N.. . . . . . . . . . . . . . . . . . . . 813-525-0273
Tampa 33609, 3432 W. Kennedy Blvd. . . . . . . . . . . . . . . . . . . . . 813-872-8317
West Palm Beach 33415, 310 South Military Trail . . . . . . . . . . . . 407-689-3247
GEORGIA:
Atlanta (South) 30349, 5330 Old National Hwy. . . . . . . . . . . . . . . 404-762-8844
Smyrna 30080, 2550 Cobb Pkwy. . . . . . . . . . . . . . . . . . . . . . . . . 404-956-0869
Stone Mountain (Atlanta) 30086, 5723 Memorial Dr. . . . . . . . . . . 404-292-4714
HAWAII:
Honolulu 96819, 330 Sand Island Access Road . . . . . . . . . . . . . 808-847-7447
ILLINOIS:
Des Plaines (Chicago) 60018, 1277 South Elmhurst Rd.. . . . . . . 708-364-5220
Lincolnwood (Chicago) 60646, 6710 N. Crawford Ave. . . . . . . . . 708-673-0923
Lisle (West Chicago) 60532, 2950 Ogden Ave., Unit H . . . . . . . . 708-717-1075
Moline 61265, 4433 23rd Ave. . . . . . . . . . . . . . . . . . . . . . . . . . . . 309-762-3000
Oak Lawn (Chicago) 60453, 6343 W. 95th St. . . . . . . . . . . . . . . . 708-423-7212
Waukegan 60085, 39 S. Greenbay Rd. . . . . . . . . . . . . . . . . . . . . 708-249-4390
INDIANA:
Evansville 47710, 307 First Ave., Crescent Ctr. . . . . . . . . . . . . . . 812-425-4269
Hammond 46323, 7103 Kennedy Ave.. . . . . . . . . . . . . . . . . . . . . 219-845-5100
Indianapolis 46224, 5999 Crawfordsville Rd. . . . . . . . . . . . . . . . . 317-243-8308
duty industrial tools are warranted for one year
chase. We will repair, without charge, any defects
terials or workmanship. Arrangements have been
ndustrial Tool Division of Black & Decker (U.S.)
warranty repairs for DeWalt tools. Please return
it, transportation prepaid, to any Black & Decker
trial Service Center or Authorized Service Station
ols, Electric” in the Yellow Pages. This warranty
o accessories or damage caused where repairs
e or attempted by others. This warranty gives you
ghts and you may have other rights which vary
te.
warranty, DeWalt tools are covered by our:
NO RISK SATISFACTION GUARANTEE
ompletely satisfied with the performance of your
duty industrial tool, simply return it to the
er within 30 days for a full refund. Please return
it, transportation prepaid. Proof of purchase may
See ‘Tools-Electric’
–Yellow Pages–
for Service & Sales
6
IOWA:
Des Moines 50310, 3427 Merle Hay Rd. . . . . . . . . . . . . . . . . . . . 515-270-1340
KANSAS:
Wichita 67213, 155 S. West St. . . . . . . . . . . . . . . . . . . . . . . . . . . 316-943-1271
KENTUCKY:
Louisville 40213, 5211 Preston Hwy. . . . . . . . . . . . . . . . . . . . . . . 502-968-7100
LOUISIANA:
Baton Rouge 70815, 11859 Florida Blvd.. . . . . . . . . . . . . . . . . . . 504-272-8111
Harvey 70058, 2500 Lapalco Blvd.. . . . . . . . . . . . . . . . . . . . . . . . 504-366-8676
Metairie (New Orleans) 70002, 3504 N. Causeway Blvd. . . . . . . 504-837-2550
Shreveport 71108, 7710-7714 Jewella Rd. . . . . . . . . . . . . . . . . . 318-688-1553
MARYLAND:
Baltimore (East) 21205, 4712 Erdman Ave. . . . . . . . . . . . . . . . . . 410-485-5550
Baltimore (North) 21030, 29-31 Cranbrook Rd., Cockeysville . . . 410-666-5966
Baltimore (South) 21122, 8220 Ritchie Hwy., Pasadena . . . . . . . 410-647-8456
Colmar Manor 20722, 4153 Bladensburg Rd. . . . . . . . . . . . . . . . 301-779-3808
MASSACHUSETTS:
Brighton (Boston) 02135, 12 Market St. . . . . . . . . . . . . . . . . . . . . 617-782-6264
Seekonk 02771, 120 Highland Ave. . . . . . . . . . . . . . . . . . . . . . . . 508-336-6510
MICHIGAN:
Grand Rapids 49512, 3040 28th St., S.E. . . . . . . . . . . . . . . . . . . 616-949-8331
Lansing 48917, 3203 W. Saginaw Hwy . . . . . . . . . . . . . . . . . . . . 517-323-4181
Warren 48093, 27035 Van Dyke Blvd. . . . . . . . . . . . . . . . . . . . . . 313-756-6711
Westland (Detroit) 48185, 8067 North Wayne Rd. . . . . . . . . . . . . 313-427-1520
MINNESOTA:
Bloomington (Minneapolis-St. Paul) 55420, 9517 Lyndale Ave., S. . 612-884-9191
MISSOURI:
Kansas City 64111, 4324 Main St. . . . . . . . . . . . . . . . . . . . . . . . . 816-531-0629
St. Ann (North St. Louis) 63074, 3637 North Lindbergh Blvd. . . . 314-739-4661
St. Louis 63131, 12852 Manchester Rd. . . . . . . . . . . . . . . . . . . . 314-821-8740
NEBRASKA:
Omaha 68127, 4225 S. 84th St. . . . . . . . . . . . . . . . . . . . . . . . . . . 402-592-5666
NEVADA:
Las Vegas 89104, 3411 East Charleston Blvd. . . . . . . . . . . . . . . 702-641-6555
NEW JERSEY:
Cherry Hill 08034, 1444 E. Marlton Pike/Rte. 70 . . . . . . . . . . . . . 609-429-2822
Little Falls 07424, 1189 U.S. Highway 46. . . . . . . . . . . . . . . . . . . 201-256-9373
Union (Scotch Plains) 07076, 2520 Route #22 East . . . . . . . . . . 908-233-5665
NEW MEXICO:
Albuquerque 87110, 5617 Menaul Blvd., N.E. . . . . . . . . . . . . . . . 505-884-1002
NEW YORK:
Buffalo 14209, 881 W. Delavan Ave. . . . . . . . . . . . . . . . . . . . . . . 716-884-6220
Centereach L.I. 11720, 2061-63 Middle Country Rd. . . . . . . . . . . 516-737-4706
Elmhurst (New York) 11373, 77-20 Queens Blvd. . . . . . . . . . . . . 718-335-1042
Latham (Albany) 12110, 836 Troy-Schenectady Rd. . . . . . . . . . . 518-785-1867
Rochester 14623, 2969 W. Henrietta Rd.. . . . . . . . . . . . . . . . . . . 716-424-1310
Syracuse 13214, 3485 Erie Blvd., East . . . . . . . . . . . . . . . . . . . . 315-446-3086
Westbury L.I. (New York) 11590, 1061 Old Country Rd. . . . . . . . 516-997-6140
NORTH CAROLINA:
Charlotte 28205, 3007 E. Independence Blvd. . . . . . . . . . . . . . . . 704-374-1779
Greensboro 27407, 3716 High Point Rd. . . . . . . . . . . . . . . . . . . . 910-852-1300
Raleigh 27604, 2930 Capital Blvd. . . . . . . . . . . . . . . . . . . . . . . . . 919-878-0357
OHIO :
Cincinnati 45241, 2310 E. Sharon Rd. . . . . . . . . . . . . . . . . . . . . . 513-772-3111
Columbus 43227, 3975 E. Livingston Ave.. . . . . . . . . . . . . . . . . . 614-237-0461
Dayton 45409, 2898 S. Dixie Dr. . . . . . . . . . . . . . . . . . . . . . . . . . 513-298-1951
Mayfield Heights (East Cleveland) 44124, 5881 Mayfield Rd. . . . 216-449-2770
OHIO (CONT’D)
Parma Heights (Cleveland) 44130, 6483 Pearl Road.
Toledo 43607, 3231 Dorr St . . . . . . . . . . . . . . . . . . . .
OKLAHOMA:
Oklahoma City 73106, 1318 Linwood Blvd. . . . . . . . .
Tulsa 74145, 3120 S. Sheridan Rd. . . . . . . . . . . . . . .
OREGON:
Portland 97209, 1640 N.W. Johnson St. . . . . . . . . . .
PENNSYLVANIA:
Evans City 16033, 20808 Rt. 19 North . . . . . . . . . . . .
Harrisburg 17112, 6080 Allentown Blvd. . . . . . . . . . .
Lancaster 17601, 118 Keller Ave.. . . . . . . . . . . . . . . .
Philadelphia 19103, 333 N. 20th St. . . . . . . . . . . . . . .
Philadelphia (North) 19115, 9977-81 Bustleton Ave. .
Pittsburgh 15232, 5437 Baum Blvd. . . . . . . . . . . . . . .
Whitehall (Allentown) 18052, 2242 MacArthur Rd.. . .
Wilkes-Barre 18702, 759 Kidder Street . . . . . . . . . . .
PUERTO RICO:
Puerto Nuevo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RHODE ISLAND:
See Seekonk, MA
SOUTH CAROLINA:
Greenville 29607, 1557 Laurens Rd. . . . . . . . . . . . . .
TENNESSEE:
Chattanooga 37421, 6231 Perimeter Drive, Space E.
Knoxville 37917, 4118 N. Broadway. . . . . . . . . . . . . .
Memphis 38116, 1085 East Brooks Rd. . . . . . . . . . . .
Nashville 37211, 4811 Nolensville Rd. . . . . . . . . . . . .
TEXAS:
Amarillo 79106, 3008 West 6th Ave. . . . . . . . . . . . . .
Austin 78757, 6549 Burnet Rd.. . . . . . . . . . . . . . . . . .
Dallas 75229, 2257 Royal Ln.. . . . . . . . . . . . . . . . . . .
El Paso 79915, 6822 Gateway East . . . . . . . . . . . . . .
Fort Worth 76111, 721 North Beach St. . . . . . . . . . . .
Garland 75043, 718 W. Centerville Rd. . . . . . . . . . . .
Houston 77022, 536 E. Tidwell Rd. . . . . . . . . . . . . . .
Houston (S.W.) 77025, 9319 Stella Link Blvd. . . . . . .
San Antonio 78201, 500 Culebra Ave. . . . . . . . . . . . .
Webster 77598, 100 East Nasa Rd. One . . . . . . . . . .
UTAH:
Salt Lake City 84115, 1541 S. Third West St. . . . . . .
VIRGINIA:
Falls Church 22046, 344 W. Broad St. . . . . . . . . . . . .
Hampton 23666, 3416 W. Mercury Blvd. . . . . . . . . . .
Norfolk 23513, 7631 Sewells Point Rd. . . . . . . . . . . .
Richmond 23222, 1424 Chamberlayne Ave. . . . . . . .
WASHINGTON:
Seattle 98108, 421 S. Michigan St. . . . . . . . . . . . . . .
Spokane 99208, N. 7011 Division St. . . . . . . . . . . . . .
Tacoma 98409, 2602 S. 38th St. . . . . . . . . . . . . . . . .
WEST VIRGINIA:
Charleston 25312, 1638 Sixth Ave. . . . . . . . . . . . . . .
WISCONSIN:
Milwaukee (Wauwatosa) 53226, 10424 West Bluemo
Download PDF

advertising