REED SD-3007 Humidity/Temperature Datalogger Instruction Manual

Below you will find brief information for Humidity/Temperature Datalogger SD-3007. The SD-3007 instrument is a compact and versatile device that measures humidity, temperature, dew point, and wet bulb temperature. It also features a Type K/J thermocouple thermometer. The device can be used to monitor a variety of environmental conditions and can store data on an SD card for later analysis. The SD-3007 is easy to use and comes with a comprehensive instruction manual.

PDF Download
Document
Humidity/Temperature Datalogger SD-3007 Instruction Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Data Logging Capabilities
  • Real Time Data Logging
  • Temperature Measurement
  • Humidity Measurement
  • Dew Point Measurement
  • Wet Bulb Measurement
  • Type K/J Thermocouple Thermometer
  • SD Card Data Storage
  • USB/RS232 Computer Interface
  • Auto Power Off Management

Frequently asked questions

To set the clock time, press and hold the SET button for 2 seconds to enter the "Advanced Setting" mode. Use the Next button to scroll through the eight main functions, until you see "dAtE". Press the Enter button and use the Up and Down buttons to adjust the Year, Month, Date, Hour, Minute, and Second values. After all the time values have been set, press the Esc button to exit "Advanced Settings".

The first time the SD card is used in the meter, the SD card will generate a folder: HTA01. The first time you use the Datalogger, in the folder HTA01, a new file name HTA01001.XLS will be created. The Datalogger will use this file until the Data has reached to 30,000 rows. The meter will then will generate a new file with a subsequent number, for example HTA01002.XLS. The folder HTA01 can hold 99.XLS files. When that number has been reached, the meter will then will generate a new folder with a subsequent number, for example HTA02. Max number of HTA-folders is 10.

Please Note: Formatting the SD card erases all data from that SD card. To format your SD card, press and hold the SET button for 2 seconds to enter the "Advanced Setting" mode. Use the Next button to scroll through the eight main functions, until you see "Sd F". Use the Up or Down Buttons to select "yES" (format the SD card) or "no" (do not format the SD card). To format your SD card, select "yES" and press the Enter Button. The Display will show "yES Enter", to confirm. Press the Enter Button to confirm.
Preparing document for printing…
0%