EPSON Stylus CX6400 All-in-One Printer Hướng dẫn sử dụng
The Epson CX6400 is a versatile all-in-one printer that combines printing, scanning, and copying capabilities in one compact device. With its high-resolution printing of up to 5760 x 1440 dpi, you can create sharp and vibrant prints for both documents and photos. The CX6400 also features borderless printing, allowing you to produce stunning photos without the hassle of trimming. Additionally, the scanner function enables you to easily digitize documents and images with a resolution of up to 600 x 1200 dpi. The copier function provides quick and convenient copying of documents and photos.
जाहिरात
जाहिरात
Start Here
EPSON Stylus ® CX6400
1
Unpack
1
Make sure you have all the parts shown here. If any parts are missing, contact EPSON ® as described on the back of this sheet.
2
Attach the Parts
1
Insert the paper support into the slots behind the printer, as shown.
4
Install Ink Cartridges
1
Wait until you see “Initial Charge” displayed on the control panel.
2
Lift up the scanner section.
7
Close the ink cartridge cover, then close the scanner section.
EPSON Stylus CX6400
Software
CD-ROM
Quick Reference
Paper support Ink cartridges
2
Remove all blue packing tape from the printer.
Feeder guard
3
Lift up the scanner section. If it doesn’t open, make sure you have removed all the tape.
2
Lower the feeder guard into the slots behind the scanner lid.
(Insert the hinges on the feeder guard into the corresponding slots on the printer.)
3
Shake the package of ink cartridges four or five times.
Then remove the cartridges from the package.
The Stylus CX begins charging the ink delivery system.
Charging takes about 2 minutes. The green light flashes and the
Stylus CX makes various sounds. Don’t turn it off while the green light is flashing or you’ll waste ink.
5
Load Paper
1
Extend the output tray.
Don’t touch the green part
Caution: You must install all cartridges and leave them installed for all types of printing. To avoid damaging the Stylus CX, never move the print head by hand.
4
Open the cartridge cover.
2
Slide the edge guide to the left.
3
Plug In and Turn On
1
Plug the Stylus CX into a grounded electrical outlet.
Caution: Do not connect the USB cable until instructed.
5
Place each cartridge in its holder.
4
Peel off the tape from the ink cartridge holder.
3
Place a stack of paper against the right side of the feeder, but don’t push it in. Slide the edge guide against the paper.
5
Close the scanner section.
2
Press and hold the On button until the green lights come on.
On button
6
Press down on each cartridge until it clicks into place.
continue Turn over
Start Here
EPSON Stylus ® CX6400
1
Unpack
1
Make sure you have all the parts shown here. If any parts are missing, contact EPSON ® as described on the back of this sheet.
2
Attach the Parts
1
Insert the paper support into the slots behind the printer, as shown.
4
Install Ink Cartridges
1
Wait until you see “Initial Charge” displayed on the control panel.
2
Lift up the scanner section.
7
Close the ink cartridge cover, then close the scanner section.
EPSON Stylus CX6400
Software
CD-ROM
Quick Reference
Paper support Ink cartridges
2
Remove all blue packing tape from the printer.
Feeder guard
3
Lift up the scanner section. If it doesn’t open, make sure you have removed all the tape.
2
Lower the feeder guard into the slots behind the scanner lid.
(Insert the hinges on the feeder guard into the corresponding slots on the printer.)
3
Shake the package of ink cartridges four or five times.
Then remove the cartridges from the package.
The Stylus CX begins charging the ink delivery system.
Charging takes about 2 minutes. The green light flashes and the
Stylus CX makes various sounds. Don’t turn it off while the green light is flashing or you’ll waste ink.
5
Load Paper
1
Extend the output tray.
Don’t touch the green part
Caution: You must install all cartridges and leave them installed for all types of printing. To avoid damaging the Stylus CX, never move the print head by hand.
4
Open the cartridge cover.
2
Slide the edge guide to the left.
3
Plug In and Turn On
1
Plug the Stylus CX into a grounded electrical outlet.
Caution: Do not connect the USB cable until instructed.
5
Place each cartridge in its holder.
4
Peel off the tape from the ink cartridge holder.
3
Place a stack of paper against the right side of the feeder, but don’t push it in. Slide the edge guide against the paper.
5
Close the scanner section.
2
Press and hold the On button until the green lights come on.
On button
6
Press down on each cartridge until it clicks into place.
continue Turn over
Start Here
EPSON Stylus ® CX6400
1
Unpack
1
Make sure you have all the parts shown here. If any parts are missing, contact EPSON ® as described on the back of this sheet.
2
Attach the Parts
1
Insert the paper support into the slots behind the printer, as shown.
4
Install Ink Cartridges
1
Wait until you see “Initial Charge” displayed on the control panel.
2
Lift up the scanner section.
7
Close the ink cartridge cover, then close the scanner section.
EPSON Stylus CX6400
Software
CD-ROM
Quick Reference
Paper support Ink cartridges
2
Remove all blue packing tape from the printer.
Feeder guard
3
Lift up the scanner section. If it doesn’t open, make sure you have removed all the tape.
2
Lower the feeder guard into the slots behind the scanner lid.
(Insert the hinges on the feeder guard into the corresponding slots on the printer.)
3
Shake the package of ink cartridges four or five times.
Then remove the cartridges from the package.
The Stylus CX begins charging the ink delivery system.
Charging takes about 2 minutes. The green light flashes and the
Stylus CX makes various sounds. Don’t turn it off while the green light is flashing or you’ll waste ink.
5
Load Paper
1
Extend the output tray.
Don’t touch the green part
Caution: You must install all cartridges and leave them installed for all types of printing. To avoid damaging the Stylus CX, never move the print head by hand.
4
Open the cartridge cover.
2
Slide the edge guide to the left.
3
Plug In and Turn On
1
Plug the Stylus CX into a grounded electrical outlet.
Caution: Do not connect the USB cable until instructed.
5
Place each cartridge in its holder.
4
Peel off the tape from the ink cartridge holder.
3
Place a stack of paper against the right side of the feeder, but don’t push it in. Slide the edge guide against the paper.
5
Close the scanner section.
2
Press and hold the On button until the green lights come on.
On button
6
Press down on each cartridge until it clicks into place.
Turn over
Start Here
EPSON Stylus ® CX6400
1
Unpack
1
Make sure you have all the parts shown here. If any parts are missing, contact EPSON ® as described on the back of this sheet.
2
Attach the Parts
1
Insert the paper support into the slots behind the printer, as shown.
4
Install Ink Cartridges
1
Wait until you see “Initial Charge” displayed on the control panel.
2
Lift up the scanner section.
7
Close the ink cartridge cover, then close the scanner section.
EPSON Stylus CX6400
Software
CD-ROM
Quick Reference
Paper support Ink cartridges
2
Remove all blue packing tape from the printer.
Feeder guard
3
Lift up the scanner section. If it doesn’t open, make sure you have removed all the tape.
2
Lower the feeder guard into the slots behind the scanner lid.
(Insert the hinges on the feeder guard into the corresponding slots on the printer.)
3
Shake the package of ink cartridges four or five times.
Then remove the cartridges from the package.
The Stylus CX begins charging the ink delivery system.
Charging takes about 2 minutes. The green light flashes and the
Stylus CX makes various sounds. Don’t turn it off while the green light is flashing or you’ll waste ink.
5
Load Paper
1
Extend the output tray.
Don’t touch the green part
Caution: You must install all cartridges and leave them installed for all types of printing. To avoid damaging the Stylus CX, never move the print head by hand.
4
Open the cartridge cover.
2
Slide the edge guide to the left.
3
Plug In and Turn On
1
Plug the Stylus CX into a grounded electrical outlet.
Caution: Do not connect the USB cable until instructed.
5
Place each cartridge in its holder.
4
Peel off the tape from the ink cartridge holder.
3
Place a stack of paper against the right side of the feeder, but don’t push it in. Slide the edge guide against the paper.
5
Close the scanner section.
2
Press and hold the On button until the green lights come on.
On button
6
Press down on each cartridge until it clicks into place.
continue
6
Install Software and
Connect to Your Computer
The software works with Windows ® 98, Me, 2000, and XP, and Macintosh ®
OS 8.6 to 9.x and 10.2 to 10.3. Follow the steps below (for Windows), or the steps in the next column (for Macintosh).
Note: There is a Security Lock program on your CD-ROM that lets you prevent unauthorized use of your CX6400. See the Quick Reference booklet for instructions on installing and using it.
Windows
1
Make sure the Stylus CX is not connected to your computer, then turn on your computer.
Note: If your Stylus CX is turned on and connected to your computer, you may see several New Hardware
Wizard screens. Click Cancel for each of these screens and disconnect your Stylus CX. You can’t install your software that way.
2
Insert your Stylus CX software
CD-ROM in your CD-ROM or
DVD drive.
3
Wait until you see this screen, then click Install.
Note: If the install screen doesn’t open automatically, do the following:
For Windows XP: click Start >
My Computer. Then double-click the EPSON CD-ROM icon.
For Windows 98/Me/2000: double-click My Computer.
Then double-click the EPSON CD-ROM icon.
4
Read the license agreement, then click Agree. Several messages display on your screen.
5
When you see this screen, make sure your
Stylus CX is turned on, then plug the USB cable into any available USB port on your computer.
After you connect your Stylus CX, Windows displays several messages.
If you don’t see the messages, make sure your Stylus CX is turned on.
6
Click Next and continue following the instructions on the screen to install the rest of your software, including EPSON Smart Panel, ™ ABBYY ®
FineReader ® Sprint, and ArcSoft ® PhotoImpression.
™
Note: It will take several minutes to install the remaining software.
Don’t cancel the installation.
7
At the completion screen, print a test page, if desired. When done, click Exit.
8
When you see the Product Registration screen, register your Stylus CX as instructed. At the last screen, click Done or close your browser.
9
At the last screen, click OK. Then remove the CD-ROM and restart your computer.
Now you’re ready to copy, scan, and print. See the Quick Reference booklet or your on-screen CX6400 Reference Guide for instructions.
continue
Macintosh
1
Insert your Stylus CX6400 software CD-ROM into your CD-ROM or DVD drive.
2
If necessary, double-click the
EPSON CD-ROM icon, then double-click the
EPSON installer icon.
You see this screen:
3
Click Install.
4
When you see the license agreement, click Agree to continue.
Note: If you’re installing on Macintosh OS X, you may see an
Authenticate message several times during installation. Enter your administrator name and password, if necessary.
5
For Macintosh OS X: Continue with the following steps.
For Macintosh OS 8.6 to 9.x: Follow any on-screen instructions, then continue with step 10.
6
Click Install at the EPSON Scan
Installer screen to install the scanner portion of your software.
7
When the software finishes installing, you see this screen. Click Quit.
8
Follow the on-screen instructions to install additional software components.
Note: Click Quit when each part finishes installing.
9
When you see a message about restarting your computer, leave in the CD-ROM and click Restart.
10
After restarting, double-click the
EPSON CD-ROM icon, if necessary, then double-click the EPSON installer icon to reopen the Software Installation screen.
11
Click Install to install the remaining software.
Note: It will take several minutes to install the remaining software.
Don’t cancel the installation.
If you’re installing on Macintosh OS 8.6 to 9.x, you may need to update your Carbon Library. Follow the instructions on the screen.
12
At the end of the installation, click Exit.
13
When you see the Product Registration screen, register your Stylus CX as instructed. At the last screen, click Quit or close your browser.
14
Make sure your Stylus CX6400 is turned on, then plug the USB cable into any available USB port on your Macintosh.
Follow the instructions in the next column to add the Stylus CX to the Print
Center or Printer Setup Utility (for OS X) or the Chooser (for OS 8.6 to 9.x).
continue
Selecting the Stylus CX for Mac OS X
1
Open the OS X Applications folder, then open the Utilities folder and start Print Center or the Printer
Setup Utility.
If you see this screen, click Add.
2
On the Printer List screen, click the Add button.
3
On the next screen, select EPSON USB from the pull-down menu.
4
Click Stylus CX6400.
Note: If the CX6400 doesn't appear, make sure it is turned on and securely connected to you Macintosh.
5
Open the Page Setup pull-down menu at the bottom of the screen and select All.
6
Click the Add button. You see the Printer List again with the
Borderless feature available.
7
Close Print Center. You’re ready to copy, scan, and print.
8
Now start up your Macintosh in OS 9.x. Follow the instructions in the previous column to install the OS 9.x drivers and optional software for
Macintosh Classic programs.
Selecting the Stylus CX for Mac OS 8.6 to 9.x
1
Open the Chooser from the
Apple menu.
2
Select CX6400, then select your
USB port and turn on background printing.
3
Close the Chooser. You’re ready to copy, scan, and print.
Any Questions?
Here’s where to look for answers:
EPSON Stylus CX6400 Quick Reference booklet
On-screen Reference Guide
Double-click the CX6400 Reference Guide icon on your desktop to view your Reference Guide.
On-screen help for EPSON Smart Panel, ArcSoft PhotoImpression,
EPSON Scan, and ABBYY FineReader Sprint.
Click the Help button or question mark that appears on the screen when you’re using any of these programs.
EPSON Technical Support (Stylus CX6400 and EPSON Scan)
• World Wide Web http://support.epson.com
• Automated Telephone Services
To use these services, you must have a touch tone telephone and call
(800) 922-8911. Your EPSON SoundAdvice SM Express Code is 70495.
Use this code to quickly select your product in SoundAdvice.
• To speak to a Technical Support Representative
Dial (562) 276-4382 (U.S.) or (905) 709-3839 (Canada), 6 AM to 6 PM ,
Pacific Time, Monday through Friday. Toll or long distance charges may apply.
Software Technical Support
Internet and E-mail Software
EPSON Smart
Panel
PhotoImpression
Telephone and Fax
(510) 445-8616
Fax: (510) 445-8601 www.newsoftinc.com
tech@newsoftinc.com
www.arcsoft.com/techmain support@arcsoft.com
8:30 AM to 5:30 PM ,
Pacific Time,
Monday–Friday
Fax: (510) 440-1270
FineReader Sprint Fax: (510) 226-6069 www.abbyyusa.com
support@abbyyusa.com
Any Problems?
If the red !
error light is on, check the message on the Stylus CX. Try turning the Stylus CX off and then back on to clear the error. If your problem is listed here, try these suggestions. For more information, see your Quick
Reference booklet, software Help, or on-screen EPSON Reference Guide.
The Found New Hardware Click Cancel and follow the steps in
Wizard appears on section 6. Disconnect the Stylus CX your screen.
before installing the software.
You see an error message Make sure your Stylus CX is connected to when you try to print your computer, plugged into a power or scan.
source, and turned on.
The Stylus CX doesn’t work.
Make sure you removed the tape from the ink cartridge holder, as described in section 1.
Turn the Stylus CX off and then on again.
Make sure the ink cartridges are pushed all the way down.
Check the LCD screen to see if you or someone else set the Security Lock. See your Quick Reference booklet for details.
Make sure your EPSON Stylus CX6400 software is installed correctly.
Need Paper and Ink?
For the best prints and copies, use genuine EPSON ink and paper. You can buy them from your local store or from the EPSON Store SM at (800) 873-7766 or www.epsonstore.com (U.S. sales only). In Canada, please call
(800) 463-7766 for dealer referral.
Look for these cartridges and paper:
T0441
Standard
Capacity
Black Ink
Cartridge
T0431
High
Capacity
Black Ink
Cartridge
T0442
Cyan
Ink
Cartridge
T0443
Magenta
Ink
Cartridge
T0444
Yellow
Ink
Cartridge
Premium Bright White Paper
Ultra-smooth white paper perfect for everyday use—especially two-sided documents.
DURABrite ® Ink Glossy Photo Paper
Heavier weight paper for long-lasting enlargements and snapshots.
Double-Sided Matte Paper
The ideal paper for high quality printing of brochures, newsletters, or flyers.
EPSON and EPSON Stylus are registered trademarks and EPSON Smart Panel is a trademark of SEIKO EPSON CORPORATION. DURABrite is a registered trademark, and EPSON Store and
SoundAdvice are service marks of Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. EPSON disclaims any and all rights in those marks.
© 2004 Epson America, Inc. 1/04
Printed in XXXXXX XX.XX-XX
6
Install Software and
Connect to Your Computer
The software works with Windows ® 98, Me, 2000, and XP, and Macintosh ®
OS 8.6 to 9.x and 10.2 to 10.3. Follow the steps below (for Windows), or the steps in the next column (for Macintosh).
Note: There is a Security Lock program on your CD-ROM that lets you prevent unauthorized use of your CX6400. See the Quick Reference booklet for instructions on installing and using it.
Windows
1
Make sure the Stylus CX is not connected to your computer, then turn on your computer.
Note: If your Stylus CX is turned on and connected to your computer, you may see several New Hardware
Wizard screens. Click Cancel for each of these screens and disconnect your Stylus CX. You can’t install your software that way.
2
Insert your Stylus CX software
CD-ROM in your CD-ROM or
DVD drive.
3
Wait until you see this screen, then click Install.
Note: If the install screen doesn’t open automatically, do the following:
For Windows XP: click Start >
My Computer. Then double-click the EPSON CD-ROM icon.
For Windows 98/Me/2000: double-click My Computer.
Then double-click the EPSON CD-ROM icon.
4
Read the license agreement, then click Agree. Several messages display on your screen.
5
When you see this screen, make sure your
Stylus CX is turned on, then plug the USB cable into any available USB port on your computer.
After you connect your Stylus CX, Windows displays several messages.
If you don’t see the messages, make sure your Stylus CX is turned on.
6
Click Next and continue following the instructions on the screen to install the rest of your software, including EPSON Smart Panel, ™ ABBYY ®
FineReader ® Sprint, and ArcSoft ® PhotoImpression.
™
Note: It will take several minutes to install the remaining software.
Don’t cancel the installation.
7
At the completion screen, print a test page, if desired. When done, click Exit.
8
When you see the Product Registration screen, register your Stylus CX as instructed. At the last screen, click Done or close your browser.
9
At the last screen, click OK. Then remove the CD-ROM and restart your computer.
Now you’re ready to copy, scan, and print. See the Quick Reference booklet or your on-screen CX6400 Reference Guide for instructions.
continue
Macintosh
1
Insert your Stylus CX6400 software CD-ROM into your CD-ROM or DVD drive.
2
If necessary, double-click the
EPSON CD-ROM icon, then double-click the
EPSON installer icon.
You see this screen:
3
Click Install.
4
When you see the license agreement, click Agree to continue.
Note: If you’re installing on Macintosh OS X, you may see an
Authenticate message several times during installation. Enter your administrator name and password, if necessary.
5
For Macintosh OS X: Continue with the following steps.
For Macintosh OS 8.6 to 9.x: Follow any on-screen instructions, then continue with step 10.
6
Click Install at the EPSON Scan
Installer screen to install the scanner portion of your software.
7
When the software finishes installing, you see this screen. Click Quit.
8
Follow the on-screen instructions to install additional software components.
Note: Click Quit when each part finishes installing.
9
When you see a message about restarting your computer, leave in the CD-ROM and click Restart.
10
After restarting, double-click the
EPSON CD-ROM icon, if necessary, then double-click the EPSON installer icon to reopen the Software Installation screen.
11
Click Install to install the remaining software.
Note: It will take several minutes to install the remaining software.
Don’t cancel the installation.
If you’re installing on Macintosh OS 8.6 to 9.x, you may need to update your Carbon Library. Follow the instructions on the screen.
12
At the end of the installation, click Exit.
13
When you see the Product Registration screen, register your Stylus CX as instructed. At the last screen, click Quit or close your browser.
14
Make sure your Stylus CX6400 is turned on, then plug the USB cable into any available USB port on your Macintosh.
Follow the instructions in the next column to add the Stylus CX to the Print
Center or Printer Setup Utility (for OS X) or the Chooser (for OS 8.6 to 9.x).
continue
Selecting the Stylus CX for Mac OS X
1
Open the OS X Applications folder, then open the Utilities folder and start Print Center or the Printer
Setup Utility.
If you see this screen, click Add.
2
On the Printer List screen, click the Add button.
3
On the next screen, select EPSON USB from the pull-down menu.
4
Click Stylus CX6400.
Note: If the CX6400 doesn't appear, make sure it is turned on and securely connected to you Macintosh.
5
Open the Page Setup pull-down menu at the bottom of the screen and select All.
6
Click the Add button. You see the Printer List again with the
Borderless feature available.
7
Close Print Center. You’re ready to copy, scan, and print.
8
Now start up your Macintosh in OS 9.x. Follow the instructions in the previous column to install the OS 9.x drivers and optional software for
Macintosh Classic programs.
Selecting the Stylus CX for Mac OS 8.6 to 9.x
1
Open the Chooser from the
Apple menu.
2
Select CX6400, then select your
USB port and turn on background printing.
3
Close the Chooser. You’re ready to copy, scan, and print.
Any Questions?
Here’s where to look for answers:
EPSON Stylus CX6400 Quick Reference booklet
On-screen Reference Guide
Double-click the CX6400 Reference Guide icon on your desktop to view your Reference Guide.
On-screen help for EPSON Smart Panel, ArcSoft PhotoImpression,
EPSON Scan, and ABBYY FineReader Sprint.
Click the Help button or question mark that appears on the screen when you’re using any of these programs.
EPSON Technical Support (Stylus CX6400 and EPSON Scan)
• World Wide Web http://support.epson.com
• Automated Telephone Services
To use these services, you must have a touch tone telephone and call
(800) 922-8911. Your EPSON SoundAdvice SM Express Code is 70495.
Use this code to quickly select your product in SoundAdvice.
• To speak to a Technical Support Representative
Dial (562) 276-4382 (U.S.) or (905) 709-3839 (Canada), 6 AM to 6 PM ,
Pacific Time, Monday through Friday. Toll or long distance charges may apply.
Software Technical Support
Internet and E-mail Software
EPSON Smart
Panel
PhotoImpression
Telephone and Fax
(510) 445-8616
Fax: (510) 445-8601 www.newsoftinc.com
tech@newsoftinc.com
www.arcsoft.com/techmain support@arcsoft.com
8:30 AM to 5:30 PM ,
Pacific Time,
Monday–Friday
Fax: (510) 440-1270
FineReader Sprint Fax: (510) 226-6069 www.abbyyusa.com
support@abbyyusa.com
Any Problems?
If the red !
error light is on, check the message on the Stylus CX. Try turning the Stylus CX off and then back on to clear the error. If your problem is listed here, try these suggestions. For more information, see your Quick
Reference booklet, software Help, or on-screen EPSON Reference Guide.
The Found New Hardware Click Cancel and follow the steps in
Wizard appears on section 6. Disconnect the Stylus CX your screen.
before installing the software.
You see an error message Make sure your Stylus CX is connected to when you try to print your computer, plugged into a power or scan.
source, and turned on.
The Stylus CX doesn’t work.
Make sure you removed the tape from the ink cartridge holder, as described in section 1.
Turn the Stylus CX off and then on again.
Make sure the ink cartridges are pushed all the way down.
Check the LCD screen to see if you or someone else set the Security Lock. See your Quick Reference booklet for details.
Make sure your EPSON Stylus CX6400 software is installed correctly.
Need Paper and Ink?
For the best prints and copies, use genuine EPSON ink and paper. You can buy them from your local store or from the EPSON Store SM at (800) 873-7766 or www.epsonstore.com (U.S. sales only). In Canada, please call
(800) 463-7766 for dealer referral.
Look for these cartridges and paper:
T0441
Standard
Capacity
Black Ink
Cartridge
T0431
High
Capacity
Black Ink
Cartridge
T0442
Cyan
Ink
Cartridge
T0443
Magenta
Ink
Cartridge
T0444
Yellow
Ink
Cartridge
Premium Bright White Paper
Ultra-smooth white paper perfect for everyday use—especially two-sided documents.
DURABrite ® Ink Glossy Photo Paper
Heavier weight paper for long-lasting enlargements and snapshots.
Double-Sided Matte Paper
The ideal paper for high quality printing of brochures, newsletters, or flyers.
EPSON and EPSON Stylus are registered trademarks and EPSON Smart Panel is a trademark of SEIKO EPSON CORPORATION. DURABrite is a registered trademark, and EPSON Store and
SoundAdvice are service marks of Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. EPSON disclaims any and all rights in those marks.
© 2004 Epson America, Inc. 1/04
Printed in XXXXXX XX.XX-XX
6
Install Software and
Connect to Your Computer
The software works with Windows ® 98, Me, 2000, and XP, and Macintosh ®
OS 8.6 to 9.x and 10.2 to 10.3. Follow the steps below (for Windows), or the steps in the next column (for Macintosh).
Note: There is a Security Lock program on your CD-ROM that lets you prevent unauthorized use of your CX6400. See the Quick Reference booklet for instructions on installing and using it.
Windows
1
Make sure the Stylus CX is not connected to your computer, then turn on your computer.
Note: If your Stylus CX is turned on and connected to your computer, you may see several New Hardware
Wizard screens. Click Cancel for each of these screens and disconnect your Stylus CX. You can’t install your software that way.
2
Insert your Stylus CX software
CD-ROM in your CD-ROM or
DVD drive.
3
Wait until you see this screen, then click Install.
Note: If the install screen doesn’t open automatically, do the following:
For Windows XP: click Start >
My Computer. Then double-click the EPSON CD-ROM icon.
For Windows 98/Me/2000: double-click My Computer.
Then double-click the EPSON CD-ROM icon.
4
Read the license agreement, then click Agree. Several messages display on your screen.
5
When you see this screen, make sure your
Stylus CX is turned on, then plug the USB cable into any available USB port on your computer.
After you connect your Stylus CX, Windows displays several messages.
If you don’t see the messages, make sure your Stylus CX is turned on.
6
Click Next and continue following the instructions on the screen to install the rest of your software, including EPSON Smart Panel, ™ ABBYY ®
FineReader ® Sprint, and ArcSoft ® PhotoImpression.
™
Note: It will take several minutes to install the remaining software.
Don’t cancel the installation.
7
At the completion screen, print a test page, if desired. When done, click Exit.
8
When you see the Product Registration screen, register your Stylus CX as instructed. At the last screen, click Done or close your browser.
9
At the last screen, click OK. Then remove the CD-ROM and restart your computer.
Now you’re ready to copy, scan, and print. See the Quick Reference booklet or your on-screen CX6400 Reference Guide for instructions.
continue
Macintosh
1
Insert your Stylus CX6400 software CD-ROM into your CD-ROM or DVD drive.
2
If necessary, double-click the
EPSON CD-ROM icon, then double-click the
EPSON installer icon.
You see this screen:
3
Click Install.
4
When you see the license agreement, click Agree to continue.
Note: If you’re installing on Macintosh OS X, you may see an
Authenticate message several times during installation. Enter your administrator name and password, if necessary.
5
For Macintosh OS X: Continue with the following steps.
For Macintosh OS 8.6 to 9.x: Follow any on-screen instructions, then continue with step 10.
6
Click Install at the EPSON Scan
Installer screen to install the scanner portion of your software.
7
When the software finishes installing, you see this screen. Click Quit.
8
Follow the on-screen instructions to install additional software components.
Note: Click Quit when each part finishes installing.
9
When you see a message about restarting your computer, leave in the CD-ROM and click Restart.
10
After restarting, double-click the
EPSON CD-ROM icon, if necessary, then double-click the EPSON installer icon to reopen the Software Installation screen.
11
Click Install to install the remaining software.
Note: It will take several minutes to install the remaining software.
Don’t cancel the installation.
If you’re installing on Macintosh OS 8.6 to 9.x, you may need to update your Carbon Library. Follow the instructions on the screen.
12
At the end of the installation, click Exit.
13
When you see the Product Registration screen, register your Stylus CX as instructed. At the last screen, click Quit or close your browser.
14
Make sure your Stylus CX6400 is turned on, then plug the USB cable into any available USB port on your Macintosh.
Follow the instructions in the next column to add the Stylus CX to the Print
Center or Printer Setup Utility (for OS X) or the Chooser (for OS 8.6 to 9.x).
continue
Selecting the Stylus CX for Mac OS X
1
Open the OS X Applications folder, then open the Utilities folder and start Print Center or the Printer
Setup Utility.
If you see this screen, click Add.
2
On the Printer List screen, click the Add button.
3
On the next screen, select EPSON USB from the pull-down menu.
4
Click Stylus CX6400.
Note: If the CX6400 doesn't appear, make sure it is turned on and securely connected to you Macintosh.
5
Open the Page Setup pull-down menu at the bottom of the screen and select All.
6
Click the Add button. You see the Printer List again with the
Borderless feature available.
7
Close Print Center. You’re ready to copy, scan, and print.
8
Now start up your Macintosh in OS 9.x. Follow the instructions in the previous column to install the OS 9.x drivers and optional software for
Macintosh Classic programs.
Selecting the Stylus CX for Mac OS 8.6 to 9.x
1
Open the Chooser from the
Apple menu.
2
Select CX6400, then select your
USB port and turn on background printing.
3
Close the Chooser. You’re ready to copy, scan, and print.
Any Questions?
Here’s where to look for answers:
EPSON Stylus CX6400 Quick Reference booklet
On-screen Reference Guide
Double-click the CX6400 Reference Guide icon on your desktop to view your Reference Guide.
On-screen help for EPSON Smart Panel, ArcSoft PhotoImpression,
EPSON Scan, and ABBYY FineReader Sprint.
Click the Help button or question mark that appears on the screen when you’re using any of these programs.
EPSON Technical Support (Stylus CX6400 and EPSON Scan)
• World Wide Web http://support.epson.com
• Automated Telephone Services
To use these services, you must have a touch tone telephone and call
(800) 922-8911. Your EPSON SoundAdvice SM Express Code is 70495.
Use this code to quickly select your product in SoundAdvice.
• To speak to a Technical Support Representative
Dial (562) 276-4382 (U.S.) or (905) 709-3839 (Canada), 6 AM to 6 PM ,
Pacific Time, Monday through Friday. Toll or long distance charges may apply.
Software Technical Support
Internet and E-mail Software
EPSON Smart
Panel
PhotoImpression
Telephone and Fax
(510) 445-8616
Fax: (510) 445-8601 www.newsoftinc.com
tech@newsoftinc.com
www.arcsoft.com/techmain support@arcsoft.com
8:30 AM to 5:30 PM ,
Pacific Time,
Monday–Friday
Fax: (510) 440-1270
FineReader Sprint Fax: (510) 226-6069 www.abbyyusa.com
support@abbyyusa.com
Any Problems?
If the red !
error light is on, check the message on the Stylus CX. Try turning the Stylus CX off and then back on to clear the error. If your problem is listed here, try these suggestions. For more information, see your Quick
Reference booklet, software Help, or on-screen EPSON Reference Guide.
The Found New Hardware Click Cancel and follow the steps in
Wizard appears on section 6. Disconnect the Stylus CX your screen.
before installing the software.
You see an error message Make sure your Stylus CX is connected to when you try to print your computer, plugged into a power or scan.
source, and turned on.
The Stylus CX doesn’t work.
Make sure you removed the tape from the ink cartridge holder, as described in section 1.
Turn the Stylus CX off and then on again.
Make sure the ink cartridges are pushed all the way down.
Check the LCD screen to see if you or someone else set the Security Lock. See your Quick Reference booklet for details.
Make sure your EPSON Stylus CX6400 software is installed correctly.
Need Paper and Ink?
For the best prints and copies, use genuine EPSON ink and paper. You can buy them from your local store or from the EPSON Store SM at (800) 873-7766 or www.epsonstore.com (U.S. sales only). In Canada, please call
(800) 463-7766 for dealer referral.
Look for these cartridges and paper:
T0441
Standard
Capacity
Black Ink
Cartridge
T0431
High
Capacity
Black Ink
Cartridge
T0442
Cyan
Ink
Cartridge
T0443
Magenta
Ink
Cartridge
T0444
Yellow
Ink
Cartridge
Premium Bright White Paper
Ultra-smooth white paper perfect for everyday use—especially two-sided documents.
DURABrite ® Ink Glossy Photo Paper
Heavier weight paper for long-lasting enlargements and snapshots.
Double-Sided Matte Paper
The ideal paper for high quality printing of brochures, newsletters, or flyers.
EPSON and EPSON Stylus are registered trademarks and EPSON Smart Panel is a trademark of SEIKO EPSON CORPORATION. DURABrite is a registered trademark, and EPSON Store and
SoundAdvice are service marks of Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. EPSON disclaims any and all rights in those marks.
© 2004 Epson America, Inc. 1/04
Printed in XXXXXX XX.XX-XX
6
Install Software and
Connect to Your Computer
The software works with Windows ® 98, Me, 2000, and XP, and Macintosh ®
OS 8.6 to 9.x and 10.2 to 10.3. Follow the steps below (for Windows), or the steps in the next column (for Macintosh).
Note: There is a Security Lock program on your CD-ROM that lets you prevent unauthorized use of your CX6400. See the Quick Reference booklet for instructions on installing and using it.
Windows
1
Make sure the Stylus CX is not connected to your computer, then turn on your computer.
Note: If your Stylus CX is turned on and connected to your computer, you may see several New Hardware
Wizard screens. Click Cancel for each of these screens and disconnect your Stylus CX. You can’t install your software that way.
2
Insert your Stylus CX software
CD-ROM in your CD-ROM or
DVD drive.
3
Wait until you see this screen, then click Install.
Note: If the install screen doesn’t open automatically, do the following:
For Windows XP: click Start >
My Computer. Then double-click the EPSON CD-ROM icon.
For Windows 98/Me/2000: double-click My Computer.
Then double-click the EPSON CD-ROM icon.
4
Read the license agreement, then click Agree. Several messages display on your screen.
5
When you see this screen, make sure your
Stylus CX is turned on, then plug the USB cable into any available USB port on your computer.
After you connect your Stylus CX, Windows displays several messages.
If you don’t see the messages, make sure your Stylus CX is turned on.
6
Click Next and continue following the instructions on the screen to install the rest of your software, including EPSON Smart Panel, ™ ABBYY ®
FineReader ® Sprint, and ArcSoft ® PhotoImpression.
™
Note: It will take several minutes to install the remaining software.
Don’t cancel the installation.
7
At the completion screen, print a test page, if desired. When done, click Exit.
8
When you see the Product Registration screen, register your Stylus CX as instructed. At the last screen, click Done or close your browser.
9
At the last screen, click OK. Then remove the CD-ROM and restart your computer.
Now you’re ready to copy, scan, and print. See the Quick Reference booklet or your on-screen CX6400 Reference Guide for instructions.
continue
Macintosh
1
Insert your Stylus CX6400 software CD-ROM into your CD-ROM or DVD drive.
2
If necessary, double-click the
EPSON CD-ROM icon, then double-click the
EPSON installer icon.
You see this screen:
3
Click Install.
4
When you see the license agreement, click Agree to continue.
Note: If you’re installing on Macintosh OS X, you may see an
Authenticate message several times during installation. Enter your administrator name and password, if necessary.
5
For Macintosh OS X: Continue with the following steps.
For Macintosh OS 8.6 to 9.x: Follow any on-screen instructions, then continue with step 10.
6
Click Install at the EPSON Scan
Installer screen to install the scanner portion of your software.
7
When the software finishes installing, you see this screen. Click Quit.
8
Follow the on-screen instructions to install additional software components.
Note: Click Quit when each part finishes installing.
9
When you see a message about restarting your computer, leave in the CD-ROM and click Restart.
10
After restarting, double-click the
EPSON CD-ROM icon, if necessary, then double-click the EPSON installer icon to reopen the Software Installation screen.
11
Click Install to install the remaining software.
Note: It will take several minutes to install the remaining software.
Don’t cancel the installation.
If you’re installing on Macintosh OS 8.6 to 9.x, you may need to update your Carbon Library. Follow the instructions on the screen.
12
At the end of the installation, click Exit.
13
When you see the Product Registration screen, register your Stylus CX as instructed. At the last screen, click Quit or close your browser.
14
Make sure your Stylus CX6400 is turned on, then plug the USB cable into any available USB port on your Macintosh.
Follow the instructions in the next column to add the Stylus CX to the Print
Center or Printer Setup Utility (for OS X) or the Chooser (for OS 8.6 to 9.x).
continue
Selecting the Stylus CX for Mac OS X
1
Open the OS X Applications folder, then open the Utilities folder and start Print Center or the Printer
Setup Utility.
If you see this screen, click Add.
2
On the Printer List screen, click the Add button.
3
On the next screen, select EPSON USB from the pull-down menu.
4
Click Stylus CX6400.
Note: If the CX6400 doesn't appear, make sure it is turned on and securely connected to you Macintosh.
5
Open the Page Setup pull-down menu at the bottom of the screen and select All.
6
Click the Add button. You see the Printer List again with the
Borderless feature available.
7
Close Print Center. You’re ready to copy, scan, and print.
8
Now start up your Macintosh in OS 9.x. Follow the instructions in the previous column to install the OS 9.x drivers and optional software for
Macintosh Classic programs.
Selecting the Stylus CX for Mac OS 8.6 to 9.x
1
Open the Chooser from the
Apple menu.
2
Select CX6400, then select your
USB port and turn on background printing.
3
Close the Chooser. You’re ready to copy, scan, and print.
Any Questions?
Here’s where to look for answers:
EPSON Stylus CX6400 Quick Reference booklet
On-screen Reference Guide
Double-click the CX6400 Reference Guide icon on your desktop to view your Reference Guide.
On-screen help for EPSON Smart Panel, ArcSoft PhotoImpression,
EPSON Scan, and ABBYY FineReader Sprint.
Click the Help button or question mark that appears on the screen when you’re using any of these programs.
EPSON Technical Support (Stylus CX6400 and EPSON Scan)
• World Wide Web http://support.epson.com
• Automated Telephone Services
To use these services, you must have a touch tone telephone and call
(800) 922-8911. Your EPSON SoundAdvice SM Express Code is 70495.
Use this code to quickly select your product in SoundAdvice.
• To speak to a Technical Support Representative
Dial (562) 276-4382 (U.S.) or (905) 709-3839 (Canada), 6 AM to 6 PM ,
Pacific Time, Monday through Friday. Toll or long distance charges may apply.
Software Technical Support
Internet and E-mail Software
EPSON Smart
Panel
PhotoImpression
Telephone and Fax
(510) 445-8616
Fax: (510) 445-8601 www.newsoftinc.com
tech@newsoftinc.com
www.arcsoft.com/techmain support@arcsoft.com
8:30 AM to 5:30 PM ,
Pacific Time,
Monday–Friday
Fax: (510) 440-1270
FineReader Sprint Fax: (510) 226-6069 www.abbyyusa.com
support@abbyyusa.com
Any Problems?
If the red !
error light is on, check the message on the Stylus CX. Try turning the Stylus CX off and then back on to clear the error. If your problem is listed here, try these suggestions. For more information, see your Quick
Reference booklet, software Help, or on-screen EPSON Reference Guide.
The Found New Hardware Click Cancel and follow the steps in
Wizard appears on section 6. Disconnect the Stylus CX your screen.
before installing the software.
You see an error message Make sure your Stylus CX is connected to when you try to print your computer, plugged into a power or scan.
source, and turned on.
The Stylus CX doesn’t work.
Make sure you removed the tape from the ink cartridge holder, as described in section 1.
Turn the Stylus CX off and then on again.
Make sure the ink cartridges are pushed all the way down.
Check the LCD screen to see if you or someone else set the Security Lock. See your Quick Reference booklet for details.
Make sure your EPSON Stylus CX6400 software is installed correctly.
Need Paper and Ink?
For the best prints and copies, use genuine EPSON ink and paper. You can buy them from your local store or from the EPSON Store SM at (800) 873-7766 or www.epsonstore.com (U.S. sales only). In Canada, please call
(800) 463-7766 for dealer referral.
Look for these cartridges and paper:
T0441
Standard
Capacity
Black Ink
Cartridge
T0431
High
Capacity
Black Ink
Cartridge
T0442
Cyan
Ink
Cartridge
T0443
Magenta
Ink
Cartridge
T0444
Yellow
Ink
Cartridge
Premium Bright White Paper
Ultra-smooth white paper perfect for everyday use—especially two-sided documents.
DURABrite ® Ink Glossy Photo Paper
Heavier weight paper for long-lasting enlargements and snapshots.
Double-Sided Matte Paper
The ideal paper for high quality printing of brochures, newsletters, or flyers.
EPSON and EPSON Stylus are registered trademarks and EPSON Smart Panel is a trademark of SEIKO EPSON CORPORATION. DURABrite is a registered trademark, and EPSON Store and
SoundAdvice are service marks of Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. EPSON disclaims any and all rights in those marks.
© 2004 Epson America, Inc. 1/04
Printed in XXXXXX XX.XX-XX
डाउनलोड
सार्वजनिक दुवा अद्यतनित केला
आपल्या चॅटचा सार्वजनिक दुवा अद्यतनित केला गेला आहे. You may view and manage your chat links after registration here.
दस्तऐवजाचा सार्वजनिक दुवा
जाहिरात
मुख्य वैशिष्ट्ये
Home & office Colour printing
A4 22 ppm
Colour copying Colour scanning
USB port
8.7 kg