SON OF TIME MST 4

SON OF TIME MST 4
SON OF TIME MST 4
MAVERICK
TW STEEL
TW Steel is a watch brand harmoniously combining
both design and innovation. ‘The Watch in Steel’ leads
the oversized market with style and quality guaranteed.
TW Steel values the most important relationship of all –
the one with the consumer. To express this, we hereby
give you all the information that you need to enjoy your
TW Steel watch to the fullest.
MAINTENANCE
TW Steel uses the best materials and carries out strict
controls before the watch leaves the factory. The way
in which you wear or treat your TW Steel will determine
whether the appearance of the watch is maintained in
the future, or whether it will deteriorate. In order to enjoy
wearing your TW Steel as long as possible, we include
a number of tips: If the watch comes into contact with
hard or corrosive materials, this can cause damage,
which, if it occurs regularly, will become clearly visible in
the form of scratches.
Your watch should be cleaned with a soft cotton cloth
that is not impregnated with any cleaning material.
Absolutely no cleaning materials should be used. It
is advisable to regularly polish your watch with a soft
cotton cloth. The watch is a precision mechanical
instrument and should be treated as such. Adjusting the
time or date, opening or closing the crown or crowncap,
should not be done roughly, but carefully.
AUTOMATIC
24 JEWELS
(0) position
Hour hand
Button A
Chronograph
minute hand
Minute hand
28
28
28
USE OF THE CROWN
To adjust the time or set the date, unscrew the
crown by turning it anti-clockwise. After adjusting,
screw the crown back by turning it clockwise.
Second hand
AUTOMATIC
24 JEWELS
Crown / normal
crown position
28
Chronograph
second hand
28
ADJUSTING THE TIME
Pull the crown out to the 2nd position. Turn the crown
to set the hour and minute hands. After the time has
been set, push the crown back to its normal position.
Button B
Date
ADJUSTING THE DATE
Pull the crown out to the 1st position. Turn the crown
clockwise to set the date. After the date has been set,
push the crown back to its normal position.
28
28
28
28
USING THE CHRONOGRAPH
WITH 2 CHRONO EYES
The chronograph is able to measure and display the time
accurately to 1/20th of a second, up to a maximum of 59 minutes
and 59 seconds. The chronograph 1/20 second hand keeps
continuously for 30 seconds after starting, and then stops at (0)
position. The chronograph can be started and stopped at any time
by pressing button A. Pressing button B resets the chronograph.
All hands will then return to their (0) position.
If the chronograph second does not return to the (0) position
after the chronograph has been reset or after the battery has
been replaced, you should do the following. Pull the crown out
to the 2nd position. Press button A to set the chronograph
second hand to the (0) position.
The chronograph second hands can be advanced rapidly by
continuously pressing button A. Once the hand has returned
to the (0) position, return the crown to its normal position
and screw the crown clockwise back to the case.
28
CAUTION : IF THE CROWN IS NOT PRESSED IN PROPERLY, THE WATCH IS NO
LONGER WATERPROOF AND THE MOVEMENT CAN BE SERIOUSLY DAMAGED!
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement