Support Information Only
Support Information Only
NOTICE: Signametrics was acquired in October 2010. This document was published
prior to that date and is provided as a courtesy. It may contain references to products or
services not supported by Keysight Technologies, Inc.
For the latest information on modular test and measurement products go to:
www.keysight.com/find/modular
Or in the US, call Keysight at 1-800-829-4444 (8am-8pm EST).
For other countries, go to: www.keysight.com/find/contactus
This information is subject to change without notice.
© Keysight Technologies, 2010 - 2014
Published in USA, July 31, 2014
5990-9488EN
www.keysight.com
5-1/2 Digit PXI Multimeter
Features
 5-1/2 Digit Resolution
 + 240,000 count A/D
+23.999,9V
 No Latency Measurements
 Selectable Measurement Rates
o 1/s to 100/s
 Fast function and range changes
 DC Voltage ranges:
o 240mV, 2.4V, 24V, 240V
 AC Voltage ranges:
o 240mV, 2.4V, 24V, 240V
 DC Current Ranges:
o 2.4mA, 24mA, 240mA, 2.4A
 AC Current ranges
o 2.4mA, 24mA, 240mA, 2.4A
 Resistance Two-Wire Ranges:
o 240Ω, 2.4kΩ, 24kΩ, 240kΩ,
2.4MΩ, 24MΩ
 Resistance Four-Wire Ranges:
o 240Ω, 2.4kΩ, 24kΩ, 240kΩ
 Diode Test:
o 100nA, 1uA, 10uA, 100uA, 1mA
 True RMS AC
 Input Impedance
o DCV 10GΩ or 10M
o ACV 1MΩ || 300pF
o Current Shunts: 0.1Ω and 10 Ω
 Auto Ranging
 Universal Software driver
o Linux & Windows
o Fast to install - tiny footprint
o Comapible with most S/W
o Stand alone – no dependencies
o Exel, Word, Matlab, LabView, C,
C++, C#, LabWindows, Visual
Basic and more
A Family of Instruments
The SMX2055 joins a long line of
offering of PCI, PXI, and USB
DMMs and Switching modules
from Signametrics. Combine a
Signametrics DMM and a Switch
to form a cost-effective test
solution. Join hundreds of loyal
users who consider these to be
the best, and friendliest to use
Instruments. Expect these
products to perform beyound
your expectations.
Signametrics SMX2055 5-½ digit Digital Multimeter is a full-featured PXI instrument. It is
the lowest priced PXI DMM on the market, yet it is a very capable DMM. It surpasses any
plug-in or bench DMM, demonstrating fast measurement rate with great stability and
repeatability.
Most 5-½ digit DMM’s are limited to 110,000 counts. The SMX2055 sports a superb zero
latency A/D with 240,000 counts. The significance of having more than twice the dynamic
range is manifested in 5-½ digits resolution over a much wider range of inputs. Measuring a
14V signal, the SMX2055 will display 14.0000V, while other DMM’s will show 14.000V.
These units are also very quick and easy to install and run. While other DMMs require many
hours of installation, the SMX2055 takes minutes to install. Expect to start making
measurements in a matter of minutes.
Very high input impedance preserves the DMM accuracy when testing devices with high
sources impedance. Four True RMS AC Volts Current ranges make use of an accurate wide
band RMS converter circuit.
The SMX2055 is not just low cost, high performance; it is also the most reliable PXI DMM
on the market.
Signametrics did not cut corners to create this DMM. We used innovation and technology,
resulting in multiple current sources and low test voltage in resistance measurements, in
wider-band AC measurements, and we did not skimp on current shunts. Both AC and DC
currents have two built in current shunts, not normally found in lower cost DMM’s.
The SMX2055 joins our full line of 6-½ and 7-½ plug-in DMM’s and Switching Modules for
PXI, USB, and PCI. Signametrics high precision DMM’s and Instrumentation quality relay
multiplexers will constitute a great foundation for your next test system. Their priceperformance is unbeatable. We have confidence you will be satisfied with these products. A
30 day no risk trial period comes with any of our instruments.
DC Voltage Measurement
Resistance Measurements



Input Resistance 240mV, 2.4V Ranges: >10 G
Input Resistance 24V, 240 V Ranges: 10.00 M
Accuracy ± (% of reading + Volts) [1]
Range
Full Scale 5-½ Digits
Resolution
Number of Current Sources Five
Accuracy ± (% of reading + ) [1]
2-Wire
Range [2]
One Year 23C  10C
Full Scale
5-½ Digits
Resolution
Source
current
One Year
23C  10C
1 mA
240 
240.000 
1 m
0.02 + 100 m
1 mA
2.4 k
2.40000 k
10 m
0.02 + 200 m
24 k
24.0000 k
100 m
100 A
0.02 + 1 
240 k
240.000 k
1
10 A
0.06 + 20 
2.4 M
2.40000 M
10 
1 A
0.06 + 200 
100 nA
24 M
24.0000 M
100 
0.2 + 25 k
[1] With measurement rate set to 2rps or lower rate, within one hour from Zero.
[2] Test voltages at full scale are 2.4V max with the exception of the 240  range
which is 240 mV.
240 mV
240.000 mV
1 V
0.015 + 7 V
2.4 V
2.40000 V
10 V
0.014 + 30 V
24 V
24.0000 V
100 V
0.02 + 750 V
240 V
240.000 V
1 mV
0.02 + 3 mV
[1] With measurement rate set to 2rps or lower rate, within one hour from Zero.
For resolution at higher measurement rates, see the following table.
Use this table for DC Volts, DC current and Resistance
measurements.
Accuracy ± (% of reading + ) [1]
4-Wire
Resolution vs. Measurement rate
Range [2]
Maximum reading rate
2 / second
8 / second
50 / second
100 / second
Full Scale
Resolution
Source
One Year
5-½ Digits
current
23C  10C
1 mA
240 
240.000 
1 m
0.02 + 50 m
1 mA
2.4 k
2.40000 k
10 m
0.02 + 100 m
24 k
24.0000 k
100 m
100 A
0.02 + 500 m
240 k
240.000 k
1
10 A
0.06 + 10 
[1] With measurement rate set to 2rps or lower rate, within one hour from Zero (Relative
control).
[2] Test voltages are 2.4V max with the exception of the 240  ranges which is 240
mV.
Resolution
5-1/2 digits
5 digits
4-1/2 digits
4 digits
19 bits
18 bits
17 bits
16 bits
DCV Noise Rejection
Normal Mode Rejection, 50, 60, or 400 Hz ± 0.5%; > 90 dB.
CMRR, with 1 k lead imbalance; > 100 dB.
AC Voltage Measurements
DC Current Measurement








Number of shunts Two
Burden Voltage 300mV max.
Protected with 2.5A Fast blow fuse
Accuracy ± (% of reading + Amps) [1]
Range
Full Scale
5-½ Digits
2.40000 mA
24.0000 mA
240.000 mA
2.40000 A
Resolution
One Year 23C  10C
Range
Full Scale
Resolution
Lowest specified
One Year [2]
5-½ Digits [3]
Input Voltage
23C  10C
240 mV
240.000 mV
5 mV
0.2 + 1 mV
1 V
2.4 V
2.40000 V
20 mV
0.25 + 10mV
10 V
24 V
24.0000 V
200 mV
0.15 + 100mV
100 V
240 V
240.000 V
1 mV
2V
0.25 + 400mV
[1] With measurement rate set to 2rps or lower rate
[2] Input frequency 47Hz to 10kHz. For other frequencies add error in tabel below
[3] Signal is limited to 8x106 Volt Hz Product
10 A
0.07 + 7 A
100 A
0.08 + 9 A
1 A
0.07 + 60 A
10 A
0.2 + 160 A
[1] With measurement rate set to 2rps or lower rate, within one hour from Zero
(Relative control).
2.4 mA
24 mA
240 mA
2.4 A
Diode Test



Additional AC Voltage errors
Test currents 100 A, 1 A, 10 A, 100 A and 1 mA
Source Voltage compliance 4V
Voltage measurement range 0V to 2.4V
Test
Current
0.1 A
1 A
10 A
100 A
1 mA
Full Scale
5-½ Digits
2.40000 V
Resolution
10 V
Input Resistance 1 M, shunted by < 300 pF
Max. Crest Factor 4 at Full Scale, 7 near 10% of range
AC coupled 10 Hz to 100 kHz
Typical Settling time < 0.5 sec to within 0.1% of final value
Method True RMS
Accuracy ± (% of reading + Volts) [1]
Add the following error if signal frequency is lower than 47Hz or
above 10kHz
Range
One Year 23C  10C
240 mV
0.022 + 15 V
0.018 + 12 V
0.015 + 10 V
0.014 + 8 V
0.014 + 8 V
2.4 V
24V
[1] With measurement rate set to 2rps or lower rate
240V
2
Signal Frequency
% of reading + Volts
20 Hz - 47 Hz
0.75 + 1 mV
10 kHz - 50 kHz
0.43 + 200V
20 Hz - 47 Hz
0.75 + 1mV
10 kHz - 50 kHz
0.45 + 2mV
20 Hz - 47 Hz
0.85 + 20mV
10 kHz - 50 kHz
0.2 + 15mV
20 Hz - 47 Hz
0.85 + 200mV
10 kHz - 50 kHz
0.15 + 100mV
ACV Noise Rejection Common Mode rejection, for 50 Hz or 60
` 1 k imbalance in either lead, is better than 80 dB.
Hz with
Selectable Measurement Rates
AC Current Measurement, True RMS



Crest Factor 4 at Full Scale, 10 at Lowest Specified Current
Burden Voltage 300mV max.
Protected with 2.5 A Fast Blow fuse
Accuracy ± (% of reading + Amps) [1]
Range
Full Scale
5-½ Digits
Resolution
Lowest
Secified
Current
60 A
300 A
3 mA
30 mA
One Year 23C
 10C [2]
10 A
0.3 + 20 A
100 A
0.2 + 100 A
0.17 + 1 mA
1 A
0.31 + 10 mA
10 A
[1] With measurement rate set to 2rps or lower rate.
[2] For input frequency 47Hz to 1kHz. For other frequencies add the error in the
tabel below
2.4 mA
24 mA
240 mA
2.4 A
2.40000 mA
24.0000 mA
240.000 mA
2.40000 A
2.4 mA
24 mA
240 mA
2.4 A
% of reading
1 kHz - 10 kHz
0.12
20 Hz - 47 Hz
0.84
1 kHz - 10 kHz
0.24
0.88
20 Hz - 47 Hz
0.8
1 kHz - 10 kHz
0.2
20 Hz - 47 Hz
0.55
1 kHz - 10 kHz
0.2
Code
1
2
3
7
14
27
55
100
RATE_1
RATE_2
RATE_3
RATE_7
RATE_14
RATE_27
RATE_55
RATE_100
1
2
3
7
14
27
55
100
Power line Rejection
50Hz
60Hz
400Hz


















Temperature Coefficient over 0C to 50C Range
Less than 0.1 x accuracy specification per C At 23C  10C
Hardware Interface
Single PXI/cPCI 3U slot
Overload Protection (voltage inputs) 300 VDC, 250 VAC
Isolation
300 VDC, 250 VAC from Earth Ground
Maximum Input (Volt x Hertz) 8x106 Volt x Hz normal mode
input (across Voltage HI & LO). 1x106 Volt x Hz
Common Mode input (from Voltage HI or LO relative to
Earth Ground).
Safety Designed to IEC 1010-1, Installation Category II.
Calibration Calibrations are performed in a computer at 23C
internal temperature rise. All calibration constants are
stored on board the DMM and in a text file.
Temperature Range Operating
-10C to 65C
Temperature Range Storage
-40C to 85C
Size
Single 3U PXI or CompactPCI slot
Power
+5 volts, 200 mA
Additional AC Current measurement errors
Signal
Frequency [1]
20 Hz - 47 Hz
Symbol
Other Specifications
Add the following error for signal frequencies lower than
47Hz or greater than 1kHz
Range
Rate (/sec)
3
s
Accessories
Several accessories are available for the SMX2055 DMM. These can be purchased directly from Signametrics, or one of its approved
distributors or representatives. These are some of the accessories available:

DMM probes SM-PRB

DMM probe kit SM-PRK

Deluxe probe kit SM-PRD ($95.00).

Shielded SMT Tweezers Probes SM-PRSMT

Multi Stacking Double Banana shielded cable 36” SM-CBL36, 48” SM-CBL48.

10A AC and DC Current shunt SM10A

Extended 3 Year warrantee (does not include calibration).
Signametrics reserves the rights to change any or all of the above without notice, and at any time.
See manual for more detailed specifications.
4
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement