SeeYou Mobile
SeeYou Mobile Help
for version 4.50
Last modified 11.7.2013
© 2003 - 2013 ... Naviter d.o.o.
I
SeeYou Mobile
Table of Contents
Foreword
0
Part I Introduction
2
1 System...................................................................................................................................
requirements
2
2 Registering
...................................................................................................................................
SeeYou Mobile
3
3 Starting...................................................................................................................................
SeeYou Mobile
3
Part II Getting started
6
1 Installing
...................................................................................................................................
and uninstalling
6
2 Running
...................................................................................................................................
SeeYou Mobile for the first time
7
3 Copying
...................................................................................................................................
files to SeeYou Mobile
9
4 Learning
...................................................................................................................................
to use SeeYou Mobile
10
5 Connecting
...................................................................................................................................
to the GPS Source
11
6 Using ...................................................................................................................................
Profiles
13
7 Entering
...................................................................................................................................
the task
14
8 How Airspace
...................................................................................................................................
warning works
19
9 Flying...................................................................................................................................
badge, record and racing tasks
21
10 Flying...................................................................................................................................
Assigned Area tasks
24
11 Flying...................................................................................................................................
with the FAI Triangle Assistant
28
12 Using ...................................................................................................................................
Thermal Assistant
30
13 Flarm ...................................................................................................................................
Radar
31
Part III Map page
36
1 Cursor...................................................................................................................................
info
37
Waypoints
Flarm
Airspace
Task
.......................................................................................................................................................... 38
.......................................................................................................................................................... 39
.......................................................................................................................................................... 40
.......................................................................................................................................................... 40
2 Glider...................................................................................................................................
position
41
3 Arrow ...................................................................................................................................
towards the North
41
4 Wind vector
................................................................................................................................... 42
5 Glideslope
...................................................................................................................................
indicator
42
6 Speed...................................................................................................................................
to Fly indicator
42
7 Vector...................................................................................................................................
map
43
8 Flight ...................................................................................................................................
trace
43
9 Terrain
...................................................................................................................................
collision
43
10 Airspace
...................................................................................................................................
warning
44
11 Navboxes
................................................................................................................................... 44
© 2003 - 2013 ... Naviter d.o.o.
Contents
II
12 Animation
...................................................................................................................................
speed
44
13 Task bar
................................................................................................................................... 45
14 Command
...................................................................................................................................
bar
45
Part IV Information page
47
Part V Statistics page
49
Part VI Menu
51
1 < Prev...................................................................................................................................
and Next >
52
2 Esc
................................................................................................................................... 52
3 Settings
................................................................................................................................... 52
4 Display
...................................................................................................................................
options
52
5 Map orientation
................................................................................................................................... 52
6 Add Waypoint
................................................................................................................................... 53
7 Zoom ................................................................................................................................... 54
8 Wind ................................................................................................................................... 55
9 McCready
...................................................................................................................................
& Altitude
56
10 Goto ................................................................................................................................... 58
Details overview
.......................................................................................................................................................... 59
Edit Waypoint .......................................................................................................................................................... 60
Waypoint filter.......................................................................................................................................................... 61
11 Task ................................................................................................................................... 64
List edit
.......................................................................................................................................................... 65
Map edit
.......................................................................................................................................................... 66
Edit Point
.......................................................................................................................................................... 67
Load task
.......................................................................................................................................................... 68
Task options .......................................................................................................................................................... 69
Upload Task declaration
.......................................................................................................................................................... 70
Multiple start ..........................................................................................................................................................
points
71
12 About ................................................................................................................................... 71
13 Exit
................................................................................................................................... 72
14 Team ................................................................................................................................... 73
15 Save Settings
................................................................................................................................... 74
16 Flarm ...................................................................................................................................
points
74
17 Switch...................................................................................................................................
Profile
75
18 ConnectMe
................................................................................................................................... 75
19 Logbook
................................................................................................................................... 75
Part VII Settings
77
1 Map ................................................................................................................................... 77
Schem e properties
.......................................................................................................................................................... 78
2 Airspace
................................................................................................................................... 79
3 Waypoints
...................................................................................................................................
(Wpts)
80
© 2003 - 2013 ... Naviter d.o.o.
II
III
SeeYou Mobile
4 Flight ................................................................................................................................... 81
5 Opt
................................................................................................................................... 82
6 Task ................................................................................................................................... 83
7 Navboxes
................................................................................................................................... 84
Edit
.......................................................................................................................................................... 87
8 Symbols
................................................................................................................................... 88
9 Warnings
................................................................................................................................... 89
10 Thermal
................................................................................................................................... 90
11 Polar ................................................................................................................................... 91
12 Units ................................................................................................................................... 92
13 Fonts ................................................................................................................................... 93
14 Input ................................................................................................................................... 93
Port Settings .......................................................................................................................................................... 95
15 Commands
................................................................................................................................... 95
16 Menu ................................................................................................................................... 96
17 Files ................................................................................................................................... 96
18 Log
................................................................................................................................... 98
19 User Interface
...................................................................................................................................
(UI)
99
Manage languages
.......................................................................................................................................................... 100
20 Flarm................................................................................................................................... 101
21 Miscellaneous
...................................................................................................................................
(Misc)
103
22 Hardware
................................................................................................................................... 103
Term inal
.......................................................................................................................................................... 104
23 V7 / LX1600
................................................................................................................................... 105
Part VIII Windows Mobile tips and tricks
Index
109
110
© 2003 - 2013 ... Naviter d.o.o.
Part
I
2
1
SeeYou Mobile
Introduction
SeeYou Mobile v4.50
SeeYou Mobile is a stand alone application for the Pocket PC environment which will help glider pilots at
all levels better understand soaring while it is happening.
Naviter is a Slovenian based software company. We focus on highly featured and easy to use software
for glider pilots. The needs of glider pilots worldwide are what we are interested in.
Naviter d.o.o.
Planina 3
4000 Kranj
Slovenia
email: [email protected]
web: http://www.naviter.com/
All rights reserved by Naviter d.o.o. 2003-2013
1.1
System requirements
There is a variety of options about which devices will run SeeYou Mobile.
Compatible Operating systems
. Windows CE 3.0
. Windows CE 5.0 (PNA)
. Windows CE 6.0 (PNA)
. Pocket PC 2002
. Pocket PC 2003 (aka Windows Mobile 2003)
. Windows Mobile 2003 Second Edition
. Windows Mobile 5.0
. Windows Mobile 6.0
. Windows Mobile 6.5
Compatible Processor types
. MIPS
. ARM
. Strong ARM
. X-Scale ARM
Compatible Displays
. Monochrome
. Color
. Portrait
. Landscape
. Any resolution
Required Memory
Depends mostly on the size of the terrain map. Without the map it is ~500KB. You can control the size of
the map through Mobile wizard in SeeYou.
© 2003 - 2013 ... Naviter d.o.o.
Introduction
1.2
3
Registering SeeYou Mobile
Unregistered version of SeeYou Mobile is 100% functional. It will however pop-up a dialog to ask for the
registration key every so often.
To be able to use SeeYou Mobile without interruption you should register SeeYou Mobile. A registration
key can be purchased online (http://www.naviter.com) or through our distributors worldwide. The
registration key allows you to install any upgrades free within the specified period. After this time, you
can still use SeeYou Mobile without limitations. To upgrade after the expiration of the upgrade key, you
need to purchase an upgrade to the original key.
To enter the registration key, go to the About 71 dialog box in Menu > ">>>" > About 71 . Enter your
name in the "Registered to" box and the key in the "Registration key" box and press Register. If the
registration is successful, you will see the information about the Serial number and Upgrade expiration
date below the box.
1.3
Starting SeeYou Mobile
You can start SeeYou Mobile by tapping on the SeeYou Mobile icon on the Today screen of your PDA.
© 2003 - 2013 ... Naviter d.o.o.
4
SeeYou Mobile
If SeeYou Mobile is installed on SD Card and your device supports autorun, then it will run automatically
as soon as you insert the SD Card into the slot.
If you prefer to do it the hard way - SeeYou Mobile is installed in \Program Files\mSeeYou by default.
© 2003 - 2013 ... Naviter d.o.o.
Part
II
6
2
SeeYou Mobile
Getting started
This topic wants to cover some of the basic things you need to know about how to use your SeeYou
Mobile. If this is the first time you are using SeeYou Mobile please take a few moments to read about the
basics about how to use SeeYou Mobile:
.
.
.
.
.
.
.
.
.
.
.
2.1
Installing and uninstalling 6
Running SeeYou Mobile for the first time
Copying files to SeeYou Mobile 9
Learning to use SeeYou Mobile 10
Connecting to the GPS Source 11
Using profiles with SeeYou Mobile 13
Flying badge, record and racing tasks 21
Flying Assigned Area tasks 24
Using Thermal Assistant 30
Flying with the FAI Triangle Assistant 28
Flarm Radar 31
7
Installing and uninstalling
Installing
The easiest way to install SeeYou Mobile on your Pocket PC is to download the installation file from
http://www.naviter.com
Run the downloaded file on your desktop PC and follow the instructions on the screen. Unless you change
something during the installation, it will be installed in \Program Files\mSeeYou folder on your device,
while terrain, airspace and waypoint files will be in \My Documents\mSeeYou folder.
A shortcut to SeeYou Mobile will be placed on the Today screen of your device. Use this icon to quickly
start the application.
Installing on a Storage Card
. Download SeeYou Mobile ZIP for Storage Card
. Insert Storage Card to your Card reader
. Unzip the contents of the downloaded ZIP file to the root of your Storage Card
. Make sure you keep the directory structure
. Insert the Storage Card to your PDA
You should now see the dialog asking you whether or not you wish to run SeeYou Mobile.
Uninstalling
To remove SeeYou Mobile from your device, you should go to Start > Settings > System > Remove
Programs. Select Naviter SeeYou Mobile and press the Remove button. It will remove the program files,
registry settings, terrain, airspace and waypoint files while recorded flights will remain on your device.
See also:
Getting Started
6
© 2003 - 2013 ... Naviter d.o.o.
Getting started
2.2
7
Running SeeYou Mobile for the first time
After successful installation
application.
6
, use the SeeYou Mobile icon on your Today screen to start the
Unless you are connected to the GPS source already, it will inform you that a GPS input is unavailable and
ask you to select a new input. Click Yes and the Settings > Input 93 dialog will be opened. To run an
already recorded demo flight, select File, then press OK in the command bar at the bottom of the screen.
What you get is the demo flight on a demo map with demo waypoints and demo airspace. The airplane
will takeoff at a 20:1 accelerated replay and the Navboxes will start to show values which the pilot would
have been looking at if he was flying with SeeYou Mobile on that particular flight.
The Map page
to bottom.
36
display is divided into Header > Map with symbols > Command bar sections from top
Header
gives you information on GPS Status, the waypoint you are navigating to, system information like low
battery, volume control and lets you minimize the application (the X button). Note that the X does not
close SeeYou Mobile, it just minimizes it. This is different than what you are used to in the desktop PC.
Map 36 with symbols
is where you will be looking for information all the time. You can tap the symbols to bring up additional
dialogs for
. Wind 55 by tapping on the Wind vector
. Map orientation 52 by tapping on the North arrow
. Flight properties 56 dialog by tapping on the arrival altitude/MC symbol
. Move the glider if you tap on the glider. This is also a sort of Pan function for the map.
Tapping on a waypoint on the map gives you a list of Waypoints, sorted on distance from the tap. This is
a quick way to select a waypoint from a group of waypoints.
Dragging a line on the screen gives you a list of Waypoints, primarily sorted on the direction of the drag
and secondly on the distance from the glider. This is useful for searching for a waypoint that is not on the
screen, but you know it is in the specified direction.
The Navboxes 84 are what you will use to display the information you need. Be it Final glide, Navigation,
Optimization or another issue, use Menu > Navboxes to select which items you want displayed.
© 2003 - 2013 ... Naviter d.o.o.
8
SeeYou Mobile
Command bar 45
holds 5 shortcuts to specific actions. In addition to the Command bar, actions are also assigned to any
hardware buttons on the Pocket PC. You can select which buttons do which actions through Menu >
Settings > Commands 95 .
The default actions for hardware buttons are
. Up = Previous waypoint
. Down = Next waypoint
. Left = Previous page
. Right = Next page
. Calendar = MacCready down
. Contacts = MacCready up
. Inbox = Previous page
. iTask = Next page
The default actions for software buttons from left to right (Command bar) are:
. Zoom 54
. Display options 52
. Goto 58
. Next page
. Menu 51
Try the functions of all of these buttons.
See also:
Getting Started
6
© 2003 - 2013 ... Naviter d.o.o.
Getting started
2.3
9
Copying files to SeeYou Mobile
Mobile Wizard connects SeeYou with SeeYou Mobile to send files to the Pocket PC. Mobile Wizard never
expires. That means you don't have to have a registered version of SeeYou to transfer all of the required
data to the Pocket PC.
1. Connect your Pocket PC to PC through Active Sync
2. Run SeeYou
3. Go to File > Mobile Wizard
First page of the Mobile wizard allows you to select the Items you wish to transfer to the device. You
can choose from
. Terrain (isolines)
. Terrain elevations (for AGL reading)
. Roads, Railroads, Rivers, Lakes and Towns
. Waypoints and Tasks
. Airspace
. Settings (Vector map color scheme, units, triangle properties, default observation zones)
Second page gives you the possibility to select basename and destination folder for the data you have
selected to upload on the first page.
. Files that will be created will have the same name as Basename and respective extensions CUB for
airspace, CIT for vector maps and CUP for waypoints and tasks.
. Destination folder can be either Pocket PC memory or local disk. Choose your preference through the
radio buttons.
. Use the Browse buttons to select the destination folder easily.
Third page asks you to draw a rectangle for the area you want to transfer to the Pocket PC.
Use Ctrl+Up, Ctrl+Down to zoom out and zoom in. Click on the the borders of the map to move
horizontally and vertically. This is the same procedure as in the other Map views in SeeYou.
Fourth page shows progress in transferring or saving files.
Once the transfer has completed successfully, you may close Mobile wizard with the Finish button.
If you get a connection error, first check whether or not SeeYou Mobile was closed on the Pocket PC. It is
important to understand the difference between the "X" button in Pocket PC and "X" button in desktop
Windows. The "X" on Pocket PC works more like "minimize" in Windows. To really quit SeeYou Mobile
you need to go to Menu > Next > "Exit".
You know SeeYou Mobile is not running when it is not listed under Start > Settings > System > Memory
> Running programs. If it's there, stop it.
Then you will be able to communicate with SeeYou Mobile through Mobile Wizard.
© 2003 - 2013 ... Naviter d.o.o.
10
SeeYou Mobile
See also:
Getting Started
2.4
6
Learning to use SeeYou Mobile
There is two recommended options to learn SeeYou Mobile before you get airborne.
File replay
This is by far the most efficient way to learn SeeYou Mobile. What it does is it replays an already flown
flight and enables you to see the data you would have been looking at if you had SeeYou Mobile with you
on the particular flight.
In order to set this up, copy some of your flights from the desktop PC to your device. Then go to Menu >
Settings > Input 93 , then change input to "File". Press the "..." button and choose a flight you wish to
replay. Now use the buttons to change Waypoints, MacCready and pages. Tap on the screen to see what
happens and setup Navboxes to what you want them to be. Note that you can setup Navboxes 84
separately for each of the two Map pages.
A particularly useful way to replay a flight is if you managed to save a NMEA log of your flight. In the
NMEA log all of the messages that were sent to the device may be reproduced on screen, including other
Flarm data and its warnings. To replay a saved NMEA log you need to create a "TMP" folder in the root
of your Pocket PC memory, save the NMEA log as "nmeain.log" and select "File" as your input in Menu >
Settings > input.
Simulator
In the Simulator input mode, you can move the glider freely even without a prerecorded flight which
enables you to go places you haven't visited in the air yet. To move the glider, tap on it, then drag a line
out of the glider in the direction you want it to move. The longer the line, the faster it will go in the
specified direction.
Learning SeeYou Mobile on the ground will give you time to think about gliding, task and scenery in the
air rather than software.
SeeYou Mobile Simulator for desktop PC
In addition we have created a 100% functional copy of our software which runs on the desktop PC. This
program enables you to test all features of SeeYou Mobile at home without even having to buy a Pocket
PC before you decide that you would like to use SeeYou Mobile in flight.
© 2003 - 2013 ... Naviter d.o.o.
Getting started
See also:
Getting Started
2.5
11
6
Connecting to the GPS Source
In general - every GPS with an NMEA output is compatible with SeeYou Mobile. What you need is the
correct wiring and correct settings in the GPS device. Below is a list of devices with particularities that
you need to check before can make a successful connection.
To check whether or not Pocket PC is receiving data from the GPS, go to Menu > Settings > Harware >
Terminal. If you can see sentences being displayed in a once-per-second rate, then your Port Settings
are setup correctly.
It is assumed that SeeYou Mobile is configured to communicate on COM 1, baude rate 4800, No Parity, 8
Bits and Stop bit 1. If not stated otherwise, these settings are assumed in Menu > Settings > Input >
Port Settings. It is also assumed that the Pocket PC COM cable is the one you can use to connect the
device to the PC through Active Sync. Note that proprietary cables can be made which can save you from
having to use a null-modem adapter by reversing pins Tx and Rx.
EXTERNAL WIRED GPS UNITS
These units connect to the Pocket PC through a COM cable connected to the connector at the bottom of
the Pocket PC device.
FLASH CARD/SLEEVE/BLUETOOTH GPS DEVICES
An overwhelming number of these devices is available worldwide. No standardization has been achieved
between the manufacturers. That means that each device connects to the PDA with different settings,
sometimes even by a single manufacturer. We therefore ask you to use this table as reference and help
us build a better database by telling us how your device connects to SeeYou Mobile. Your best reference
is the manual for your device.
Examples for external wired GPS units:
Garmin
. Cables: Use the supplied Garmin PC cable, a male/male null-modem adapter and the Pocket PC COM
cable.
. GPS Setup: Interface must be setup to "NMEA Out".
LX Navigation
. Cables: LX Navigation supplies cables, mounts and splitters to connect their instruments with PDA. We
suggest you use these cables.
. Setup: NMEA must be setup to output ONLY these sentences: GPRMC, GPGGA and LXWP_. LXWP_ is
only available in newest firmware versions.
. LX 1600 is delivered with all required cables from the factory. To communicate both ways with the unit
© 2003 - 2013 ... Naviter d.o.o.
12
SeeYou Mobile
you MUST setup Menu > Settings > Hardware > Device > LX 1600.
. When connected to LX 7007 version 1.04 or higher, Menu > Settings > Input > Port Settings > Speed
must be 19200bps due to the default settings on the LX 7007.
SDI Posigraph
. Cables: LX Navigation supplies cables, mounts and splitters to connect Posigraph to the PDA. We
suggest you use these cables.
. Setup: Press Setup, then select Setup > Output. Select Output NMEA to Y, Output WINP to Y.
Volkslogger
. Cables: Fa. Garrecht Avionik supplies cables and mounts to connect Volkslogger to the PDA. We suggest
you use these cables.
. Setup: SeeYou Mobile MUST be setup to communicate with Volkslogger by selecting Menu > Settings >
Hardware > Device > Volkslogger.
Flarm
. Cables: Widely available through 3rd party vendors
. Setup: Menu > Settings > Input should be 19200bps if you are to receive additional messages about
the other Flarms in vicinity
Cambridge models 10, 20 & 25
. Setup: SeeYou Mobile MUST be setup to communicate with Cambridge GPS-NAV by selecting Menu >
Settings > Hardware > Device > Cambridge GPS-NAV
Cambridge 302
. Cables:
. Setup: SeeYou Mobile can communicate with 302 both ways. It MUST be setup to Menu > Settings >
Hardware > Device > Cambridge 302. You can choose which data you wish to send and receive.
Printtechnik GR 1000
. Setup: NMEA Output must be set to "NMEA A"
Examples of Bluetooth, Card or Sleeve GPS units.
Navman Sleeve
. Setup: Go to Menu > Next > Input > Port Settings. Change Port to 4 or 6 (depends on the model),
Speed to 57000, Parity None, Bits 8, Stopbits 1. Check Menu > Settings > Hardware > Terminal to see if
Pocket PC is receiving sentences from the GPS.
TomTom
. Their devices are easy to connect in general. However, the TomTom application may not close the COM
port properly on some devices. We suggest you make a soft reset before the flight and NOT use the
TomTom software during the flight. See also our Support forum
Asus GPS Mouse
. Connects without setting up anything beyond the default settings.
See also:
Getting Started
6
© 2003 - 2013 ... Naviter d.o.o.
Getting started
2.6
13
Using Profiles
If you feel no need to use more than one set of navboxes or fly more than one sailplane ignore this
feature and go read the next chapter.
If however you fly several types of gliders or fly at different
locations you are likely to be fed up with changing the polar, terrain,
waypoint and airspace files each time before the flight. Profiles
were added in SeeYou Mobile 2.0. You can have separate setups for
each of your club's gliders plus one profile for the competition you
are attending shortly. Here's how it works.
1. When you first ran SeeYou Mobile, a Default profile was created.
Anything you have changed in the application was stored to this
profile. Now comes a day when you fly the single seater of your club
with a significantly different polar and GPS source than the one you
have used previously. To avoid entering the polar, header and
hardware data each time you go fly this glider, you may create a
new profile by going to Menu > Settings > Miscellaneous 103 and
click the "Add Profile..." button.
2. You get to choose to either
. Copy current profile (which makes an exact copy of your current
settings)
. Create a new profile (which creates a copy of the default settings)
You may give the new profile a name according to what you are
going to use it for. Be it "ASW 27", "LX 1600" or "World Gliding
Championships".
© 2003 - 2013 ... Naviter d.o.o.
14
SeeYou Mobile
3. Next time you start SeeYou Mobile you will have two (or more)
profiles to choose from. You have 10 seconds to select a profile. If
you do nothing, the profile you used last is loaded.
4. After you have loaded the profile for the first time you will want
to set it up according to your preferences. Here is a handful of
settings you will probably want to change before use:
Links to Terrain, Airspace and Waypoint files 96
Pilot name and Glider type settings 98
Hardware that is connected to SeeYou Mobile 103
Navboxes for Map1 84
Navboxes for Map2 84 (they are separate, remember?)
See also:
Getting Started
2.7
6
Entering the task
This is a tutorial about entering the task in SeeYou Mobile. We have had the privilege to look over the
shoulder many impressively experienced pilots who have found a very difficult way to enter a task into
SeeYou Mobile.
Please read this because entering the task is just that - enter the waypoint names and go. No setting up
of observation zones is neccessary. Tutorial will focus on entering the demo task. The default one in the
evaluation version of SeeYou Mobile. The task will become a 500km FAI triangle in the south-eastern
part of the Alps. Both Racing, badge and record tasks as well as Assigned Area tasks are covered.
Always start from the scratch. Menu > Task > Tools > Clear task:
© 2003 - 2013 ... Naviter d.o.o.
Getting started
15
Make sure the first line in the empty list is selected (if you didn't touch the screen after clearing the task,
then it is already selected). Then press the "Keyb" (as in Keyboard) button:
Start typing and you will notice that the waypoint name auto-completes while you are typing (note that
the keyboard characters which do not make sense are disabled while you type):
© 2003 - 2013 ... Naviter d.o.o.
16
SeeYou Mobile
Note that S and V keys were pressed while ". Peter" was auto-completed. If you know your waypoint is in
alphabetical vicinity of the currently auto-completed name of the waypoint, you may also use the "<<"
and ">>" buttons on the full screen keyboard to advance the waypoint names alphabetically. Once you
have found the waypoint you were looking for, press OK.
You are now back in the List view of the Task dialog. Tap on the line below the start point. The line
becomes blue:
Press the "Keyb" button again and start entering the first turnpoint's name, Corvara in this example:
© 2003 - 2013 ... Naviter d.o.o.
Getting started
17
Note that after entering "C" and "O" the suggested waypoint name is "Cortina", not "Corvara". Press ">>"
once and you are now at "Corvara". Press OK.
Repeat this procedure until all waypoints including the finish are entered:
If your default Observation Zone settings in Menu > Settings > Task > Observation Zone > Type > Start/
Point/Finish are what you wanted to use on this flight then you are finished. Go fly the task and enjoy!!
ASSIGNED AREA TASKS
Assigned Area tasks are only set in competitions. The organisation will always prepare a task sheet. This
© 2003 - 2013 ... Naviter d.o.o.
18
SeeYou Mobile
is an excerpt of a task sheet showing the description of the observation zones:
For the tutorial we will edit the observation zone of the point "500Obert" (which is code name for "500
Obertauern" in the task sheet). Tap on the waypoint "500Obert" to make it blue. Then press the Edit
button as indicated in the screenshot:
In the Edit Waypoint dialog tap you need to enter the information from the task sheet. Generally speaking
the data is listed in the same order as you would follow through the dialog:
© 2003 - 2013 ... Naviter d.o.o.
Getting started
.
.
.
.
.
.
.
.
19
Direction (Symmetric)
Angle12 (not enabled for Symmetric direction)
Radius 1 = 20 km (you are free to use non-default units)
Angle 1 = 180
Radius 2 = 0
Angle 2 = 0
tick the "Assigned Area" checkbox
do not tick "Line only" because it is not listed in the observation zone description
That's it. Close the dialog with OK. Edit all remaining Assigned Area sectors. Don't forget the enter task
time under Tools > Options > Task Time.
SAVING TASK FOR LATER USE
It is always wise to make sure you have all the data securely stored in case of an unintended outage of
the device. Start from the main screen and select Menu > Next > Save Settings > tick the "Save profile"
and "Save waypoints and tasks" checkboxes (if they are both enabled), then tap "Yes".
"Save Settings" button is a new addition to SeeYou Mobile 3.1 and later. It may be positioned elsewhere
(i.e. not on the second Menu page) depending on your settings for the Menu > Settings > Menu.
2.8
How Airspace warning works
Avoiding forbidden airspace is often just as important as navigating in general. It can however be much
trickier than finding the right valley to go down to since the airspace structure is very abstract and often
complicated. SeeYou Mobile will be your best friend if you use the whole potential of what it's got to
offer.
© 2003 - 2013 ... Naviter d.o.o.
20
SeeYou Mobile
1. Airspace Warning
The first stage - let's name it the Airspace Warning - is often merely
informative. The screen will display an orange banner at the top of
the page and highlight the airspaces you are about to encounter. It
will also display a line with distances from your position to the
narest position of each airspace you are about to encounter. And it
will beep briefly.
You get to choose to turn the airspace warning off for the airspace
which is listed in the banner. You can turn it off for either
. Today - until next takeoff
. 5 minutes - note that this number is user selectable through Menu
> Settings > Warnings)
. Ignore - for as long as you are flying towards it it won't beep
again)
2. Airspace Alarm
Once you come too close for comfort an airspace alarm will sound.
It gives you a red banner at the top where you can read all about
the airspace in question and it will highlight the airspace in question.
It will also draw the line to the closest point of the airspace and it
will give you a sound alarm continuously.
You still get to choose to turn this alarm off for
. Today - until next takeoff
. 5 minutes - user selectable in Menu > Settings > Warnings
. Mute - continue to display everything but stop the sound alarm
After you have pressed Mute you can still Ignore this airspace
alarm.
3. Helpful Navboxes
There are three airspace related navboxes which will give you a good overview of the airspace situation
if you are familiar with what they are displaying:
1. "Nearest airspace - Horizontally" gives you the distance from your position to the nearest position of an
airspace where you are not horizontally inside (i.e. you are not below this airspace yet)
2. "Horizontally nearest airsapce - Altitude" gives you the altitude difference towards the horizontally
© 2003 - 2013 ... Naviter d.o.o.
Getting started
21
nearest airspace. The altitude difference is negative if you are below horizontally nearest airsapce. It is
positive if you are above and "Inside" if you are about to hit the lateral borders of the airspace in
question.
3. "Nearest airspace - Vertically" gives you the altitude difference towards the airspace above or below
the glider. The value is negative if you are below the airspace. It is positive if you are above, "Inside" if
you are already inside an airspace and "N/A" if there is no airspace at your location.
In addition to the airspaces there is also a very useful Action which can be assigned to any Navbox. It is
the action "Highlight nearest airspace" and it is assigned to the "Nearest airspace - Horizontally" by
default. If you touch a Navbox which has this action assigned to it, SeeYou Mobile will highlight the
airspace in question. It will link the glider with the airspace and display the distance from the glider to the
airspace.
4. Screen taps
In addition to all the above you may tap anywhere on the screen and then choose "Airspace" to quicly
access the list of airspaces at the location of the tap. With this list you can quickly change the visibility of
the airspaces or simply get an overview of what lies ahead. You can also change the properties of an
airspace such as lower or upper limit.
With this information airspace navigation should be easy and understandable even in a rather complex
airspace environment.
Read also:
. Setting up the Warnings
. Changing properties of an airspace
. Loading (multiple) airspace files
2.9
Flying badge, record and racing tasks
To complete this type of tasks, you need to do some preflight preparation.
1. Enter the task you will be flying.
You will need to go to the Menu > Task 64 dialog. Use the keypad to enter waypoint names in list view.
Type first few characters, then use left and right keys to complete the selection.
© 2003 - 2013 ... Naviter d.o.o.
22
SeeYou Mobile
After you have entered the task waypoints, check that waypoint sectors are setup correctly. At each of
the waypoints, click on the Edit button to open Edit point 67 dialog. Setup these values to fly FAI records
or badges:
. Start: Direction = Next, Radius1 = 0.5km, check Line only checkbox.
. Waypoints 1-3: Direction = Symmetric, Radius1 = 3km, Angle1 = 45° (the rest is zero or not
unselected)
. Finish: Direction = Previous, Radius1 = 0.5km, check Line only checkbox.
2. Start the task in flight.
Look at the screen to see where the start line is in order not to miss it. You will get a sound warning
telling you that you have successfully crossed the start line. After you have crossed the start line a box
© 2003 - 2013 ... Naviter d.o.o.
Getting started
23
appears where the start time is displayed. To start navigating on the task, press the Start Time box.
Navigation is moved to the first waypoint of the task and statistics runs.
To make a re-start. Change the target waypoint back to start point. The quickest way to do it is to open
the Task dialog, select start point and press Goto. Statistics will be reset, when you cross the start line
again.
3. Flying the task
To navigate during the task use all of the featues that are made available to you through SeeYou Mobile:
. Map pages 36 to see where you are
. Navboxes 84 to see the flight parameters you are interested in
. Statistics 49 to see what you have done
. Airspace warning 44 to keep yourself out of trouble
. Goto dialog 58 to find nearest airports etc.
4. Final glide
Here's a suggestion. Flying final glides is the most comfortable when you use the Required L/D and
Current L/D navboxes 84 . What they do is they show the required L/D to the finish line and current L/D
you are doing at the moment. You are on glide slope when Current L/D is higher than Required L/D. The
calculation already includes reserve altitude. The nice part is that it is insensible of the MC setting, glider
polar, wind calculation, setting for bugs and ballast. All of them can be wrong when you try to math
through the glider polar.
Current L/D however is pragmatic - it tells you what you are doing. Required L/D is pragmatic as well. It
tells you what you should be doing. If Current L/D is higher than the Required one you are doing good. If
it looks like you can keep going like that, you are doing great.
Have fun making those final glides!
See also:
Getting Started
© 2003 - 2013 ... Naviter d.o.o.
6
24
2.10
SeeYou Mobile
Flying Assigned Area tasks
In an Assigned Area task one has a choice of a large area where a turnpoint can be set. Speed is all that
matters in an Assigned Area task. The pilot should have one fix in each are so, that he can maximize the
given meteorological conditions. Assigned Area tasks can hardly be considered without using a Pocket PC
device and its intuitive use of the touch screen.
1. Enter the task you will be flying.
You will need to go to the Menu > Task 64 dialog. Use the keypad to enter waypoint names in list view.
Type first few characters, then use left and right keys to complete the selection.
After you have entered the task waypoints, you must setup the properties for the Assigned Areas. Click
on the Edit button of each waypoint to open Edit point 67 dialog. To make the sector an Assigned Area,
you should:
. check the Assigned Area checkbox
. enter Direction, Angle12, Radius1, Angle1, Radius2 and Angle2 values as assigned at the briefing.
To setup a "disc" shape sector, you should enter
Direction = Symmetric (not required)
Radius1 = a value in kilometers or miles, given at the briefing
Angle1 = 180°
Assigned Area = Checked
© 2003 - 2013 ... Naviter d.o.o.
Getting started
25
The next thing to do is to setup the task time, also specified at the briefing. It is setup in minutes
through Menu > Task > Tools > Options > Task Time 69
2. Before the flight
Turnpoints in each sector are setup to the center of each sector by default. But this is probably not where
you are going to fly to given the latest meteo situation. If you have a rough idea about what you are
going to do, go to Menu > Task > Map 66 or tap on the screen and select the Task tab 40 in Cursor Info
dialog. Change the "navigate to" point in each sector to create a task of the desired length and speed
which you think is achievable in Task Time for the given day.
© 2003 - 2013 ... Naviter d.o.o.
26
SeeYou Mobile
3. Start the task in flight.
Look at the screen to see where the start line is in order not to miss it. You will get a sound warning
telling you that you have successfully crossed the start line. After you have crossed the start line a box
appears where the start time is displayed. To start navigating on the task, press the Start Time box.
Navigation is moved to the first waypoint of the task and statistics runs.
To make a re-start. Change the target waypoint back to start point. The quickest way to do it is to open
the Task dialog, select start point and press Goto. Statistics will be reset, when you cross the start line
again.
4. Flying the task
To navigate during the task use all of the featues that are made available to you through SeeYou Mobile:
. Map pages 36 to see where you are
. Navboxes 84 to see the flight parameters you are interested in
. Statistics 49 to see what you have done
. Airspace warning 44 to keep yourself out of trouble
. Goto dialog 58 to find nearest airports etc.
© 2003 - 2013 ... Naviter d.o.o.
Getting started
27
While on the task, you will get a much better idea about what the weather is doing for you. You will want
to move the point in the next sector to optimize it for the speed you think is achievable for the rest of the
flight.
Observe how the finish time indicators change as you move the point around. This wil give you a very
good idea about what you should be doing in the next couple of hours.
5. Statistics
While in flight, you will also be interested in the Task Statistics 49 of what you have achieved. Two
pages will help you understand what is going on. Task statistics gives you distance and speed achieved
since crossing the start line while 60 minue statistics tells you how you are doing in the last hour.
© 2003 - 2013 ... Naviter d.o.o.
28
SeeYou Mobile
Comparing the two gives you a good idea about what you need to do to finish the task.
6. Final glide
Here's a suggestion. Flying final glides is the most comfortable when you use the Required L/D and
Current L/D navboxes 84 . What they do is they show the required L/D to the finish line and current L/D
you are doing at the moment. You are on glide slope when Current L/D is higher than Required L/D. The
calculation already includes reserve altitude. The nice part is that it is insensible of the MC setting, glider
polar, wind calculation, setting for bugs and ballast. All of them can be wrong when you try to math
through the glider polar.
Current L/D however is pragmatic - it tells you what you are doing. Required L/D is pragmatic as well. It
tells you what you should be doing. If Current L/D is higher than the Required one you are doing good. If
it looks like you can keep going like that, you are doing great.
Enjoy Assigned Areas!
See also:
Getting Started
2.11
6
Flying with the FAI Triangle Assistant
FAI Triangle Assistant helps you complete the largest possible FAI Triangle.
You don't have to do much to use the FAI Triangle Assistant. Just turn it on and fly is how we tried to
design the assistant. Here's how it works.
Turning the FAI Assistant on or off follows the same phylosophy as toggling the Map, Waypoints,
Airspace, Navboxes etc. It is controlled through the Display Options 52 dialog.
© 2003 - 2013 ... Naviter d.o.o.
Getting started
29
Flying the Free FAI Triangle task
Once the FAI Area is on, you don't have to do much. You are of course required to know at least roughly
which direction you would like to fly to fly a triangle. The larger the triangle you are attempting, the more
you will know where to go. FAI Triangle Assistant will simply follow what you are doing. As you fly the
first leg it won't yet know which way you are going to fly. That is not a problem. The FAI Area will be
drawn on one side of the first leg. If you would like it to be on the other side, simply tap inside the area
and it will rotate (provided that "Rotate on click" is enabled in the settings, which - by default - it is).
Once you have turned your first waypoint, simply continue to fly towards your other waypoint (or rather a
larger area where you would like to turn your second waypoint). As soon as the triangle you have flown
is deep enough the FAI Area changes. It is not drawn on the longest leg anymore. Instead it is drawn on
the last leg you have flown. That means it is showing you the way towards the area where you will be
able to turn your second waypoint and allow your whole flight to be an FAI triangle.
When you are near your second waypoint you will appreciate some help from the FAI Triangle
optimization navbox, which is available through the list of Navboxes 84 . Place it visibly on the screen to
know exactly how large the triangle will be if you can finish it home. After you are happy with what you
have done in your second area, head home. The FAI Triangle optimization should not change anymore,
it's just about getting home.
The above example focused on an FAI Triangle which has been started from one of its corners. Flying a
triangle with the start on the leg is no different. The only difference is that the second point you turn
represents the first point from the above example and the third one is the final one from which you fly
home.
Finishing the task
An FAI Triangle is not finished unless you fly back to your start point. One finish fix within 1 km radius
from another fix that occured before turning the 1st waypoint of the optimized triangle is required to
finish the task. It may be a single fix if you started your triangle in one of its corners. It is a whole series
of fixes between soaring begin and the first waypoint if you started the triangle on one of its legs.
© 2003 - 2013 ... Naviter d.o.o.
30
SeeYou Mobile
FAI Triangle Assistant also helps you identify the exact course to fly by always highlighting a 1km
diameter circle around the closest available finish fix.
Rotating the area
Sometimes the flight requires much more thinking than the above examples. You may wish to know if
your current leg is long enough already to cover Town X with the FAI Area of your current flight. For this
reason you will want to rotate the FAI area from its current position. It can hardly be easier to do simply tap on the FAI Area on the moving map and it will rotate. If you are on your first leg (or not far
enough on the second), it will rotate left/right around the first leg. Once you are far enough on the
second leg to make it obvious which way you are going to fly the triangle, it will rotate around the legs.
All this provided that "Rotate on click" is enabled in the settings, which - by default - it is.
The FAI Area icons may also be placed on the Command bar if you wish to have quick and constant
access to them in flight. There are options for toggling the FAI Area and Rotating the FAI Area under
Menu > Settings > Commands 95 .
FAI Triangle Assistant preferences
If you would like to influence the look and feel of the FAI Triangle Assistant you may do so through Menu
> Settings > OLC & FAI Area 82 dialog.
Example shows kilometer lines for Triangles between 160 - 280 km. If you fly into the violet area, the
triangle will be an FAI triangle.
See also:
Getting Started
2.12
6
Using Thermal Assistant
Thermal assistant is a feature of SeeYou Mobile which should help you get centered in a lift more quickly
if you decide to follow its instructions.
© 2003 - 2013 ... Naviter d.o.o.
Getting started
31
Thermal assistant analyses the lift in your thermal. It calculates the average and follows how strongly the
vario values change in each circle.
It uses two ways to catch your attention:
1. Thermal Assistant audio warning goes off if variance is large enough (see Settings - Thermal 90 ).
It whistles a selected amount of seconds or degrees (see Settings - Thermal 90 ) before the glider will
reach the same part of the circle where maximum lift was reached in the previous circle.
2. Thermal assistant graphics is displayed if variance for displaying the thermal assistant is large
enough (see Settings - Thermal 90 ). The size of the bubbles represents the amount of lift. The color of
the bubble is relative to the MacCready setting. Red is better thank MC, blue is more than 0.5m/s (1kts)
less than MC, yellow is in between. The arrow is pointing towards the maximum of the lift in the previous
circle while the length of the arrow is how "strong" the advice is to move your circle elsewhere. The
arrow is longer if variance is larger.
Your job:
. find a thermal
. start circling
. look outside
. observe the thermal clues
. observe traffic in your vicinity
. make use of Assistant's suggestions
Assistant's job:
. analyze the thermal
. find the strongest lift in the circle
. make audio and visual suggestions
We were not trying to develop a Thermal Wizard, just an Assistant
for the times when you are tired or have better things to do than
focus 100% on the thermal. It will only sound a bell if the thermal
varies significantly in strength.
If you would like to display Thermal assistant regardless of the current vario variation, feel free to
navigate to the Menu and press the Thermal Assistant button. To close the Thermal Assistant, just tap
the screen anywhere.
We will be happy if you continue to enjoy soaring and if you never find the need to use the Thermal
Assistant at all :-)
See also:
Getting Started 6
Settings - Thermal
2.13
90
Flarm Radar
Flarm is a collision-warning system for general aviation and recreational flying. It is an alternative to the
commercial airliners' expensive ACAS/TCAS system. It is however important to understand that Flarmlike devices were not designed to protect you from other flying objects. They are useful for situational
© 2003 - 2013 ... Naviter d.o.o.
32
SeeYou Mobile
awarness of other Flarm devices in vicinity. There is lots of other traffic and obstacles that are not
covered by Flarm therefore be aware that the most important task in the cockpit is to keep a good
overview of the traffic around your glider at all times.
SeeYou Mobile is able to read the output from Flarm devices and present a radar-like system which
displays other Flarms with correct visibility/privacy settings in vicinity. Flarms that have privacy enabled
are hidden. The screen may look like this:
Each circle represents 1 km distance from the other Flarm device. By default, those Flarms which are
less than 100 meters above or below your current altitude are marked red, others are black. Each Flarm
is presented by a glider symbol, its recent track and a group of numbers for altitude and average vario
(20s average). If a friendly name was added for a particular Flarm, then this name appears in the label
as well. Colors, visibility of the radar, track lenghts and some other settings are customizable through
Settings > Flarm 101 .
At zoom levels greater than 10km (by default) the radar circles around the glider disappear. New circles
appear in the upper right corner of your screen. This is a Flarm Radar Symbol (see also Settings >
Symbols 88 ) which displays the three concentric circles in the upper right corner of your screen (by
default, but you can move it around). They still represent 1km distance each regardless of the chosen
Zoom level and units.
You may tap anywhere on the screen and select the "Flarm" tab to see a list of all Flarm devices that are
being received at the moment:
© 2003 - 2013 ... Naviter d.o.o.
Getting started
33
In the example screenshot three Flarm devices are visible. By default they are sorted on distance from
the tap on the screen. If you tap on a specific aircraft that aircraft will be the first on the list. First item in
the screenshot is "DD8D07". This code is the Flarm identification number and thus not very useful or
intuitive. This is why you may select a device and click Edit to rename a specific Flarm to give it a
readable name.
You may also select a device and then Goto. This way you start navigating towards the selected Flarm
device for as long as it is within range. When it goes out of range, the aircraft symbol for that device will
start blinking for a default period of 120 seconds. After that the target becomes blank and the device is
removed from the maps and lists.
The keyboard for entering the Flarm friendly name and other information is large enough to be used in
flight by fingers:
© 2003 - 2013 ... Naviter d.o.o.
34
SeeYou Mobile
Close all dialogs with OK and you will see an additional line in the Flarm-Radar screen which will report
Flarm's friendly name in addition to altitude and vario (see the first screenshot for Friend and Enemy
flarms). Additionally when you exit SeeYou Mobile these friendly names will be stored on your PDA for
the future. It is a simple text file, so feel free to share it with friends.
Further customization is possible through Settings > Flarm dialog 101 :
See also:
Getting Started 6
Settings > Flarm 101
© 2003 - 2013 ... Naviter d.o.o.
Part
III
36
3
SeeYou Mobile
Map page
Map view is the main SeeYou Mobile window. It contains the following elements:
. Glider position 41
. Arrow towards the North 41
. Wind vector 42
. Glideslope indicator 42
. Speed to Fly indicator 42
. Vector map 43
. Flight trace 43
. Terrain collision 43
. Airspace warning 44
. Navboxes 84
. Animation speed 44
. Header line 45
. Command bar 45
A function is assigned to each one of these elements. It is described in the chapters you will access by
following the above links.
An important feature of the Map page is Cursor info
37
.
There are two Map views (Map 1 and Map 2) which are setup independently from each other. Each map
view can be orientated differently, have different Zoom levels, details of the map and its own Navboxes.
This is useful because you can switch from an overview map.
Overview of the most important features of the Map view:
© 2003 - 2013 ... Naviter d.o.o.
Map page
3.1
37
Cursor info
A tap on the map brings up a dialog with relevant information about
. Waypoints 38
. Flarm 39
. Airspace 40
. Task 40
If either of the items above is present within the Drag limit 103 distance from the tap, such information is
presented in a dialog.
© 2003 - 2013 ... Naviter d.o.o.
38
3.1.1
SeeYou Mobile
Waypoints
If a tap on the map occurred close to a Waypoint, cursor info dialog appears with Waypoints sorted on
distance from the position where the tap occurred.
You can also get a list of Waypoints, sorted on direction. Tap the screen and hold it down, then move the
finger in one direction. You will get a list of points sorted on distance (+-15 degrees from the direction of
the drag)
Columns are sortable in the Goto dialog. Click on the column header to sort ascending or descending on
these parameters:
. Name
. Type (Ascending ordering lists landable fields first. Sorting on this column effectively lists Near
Airports)
. Crs = Course
. Distance
. Arrival altitude
. Required L/D
. Code (short name)
If you would like to change the order or size of the columns, you may drag the boundaries to change size
or drag the header to change the order of the columns.
© 2003 - 2013 ... Naviter d.o.o.
Map page
39
Tap on a Waypoint, then tap OK to start navigating to the selected point.
3.1.2
Flarm
This screen is only available when Flarm messages are received in the NMEA input stream. If you tap
anywhere on the screen and select the "Flarm" tab to see a list of all Flarm devices that are being
received at the moment:
In the example screenshot three Flarm devices are visible. By default they are sorted on distance from
the tap on the screen. If you tap on a specific aircraft that aircraft will be the first on the list. First item in
the screenshot is "DD8D07". This code is the Flarm identification number and thus not very useful or
© 2003 - 2013 ... Naviter d.o.o.
40
SeeYou Mobile
intuitive. This is why you may select a device and click Edit to rename a specific Flarm to give it a
readable name. In the example screenshot above, two flarm devices were renamed to "Friend" and
"Enemy" respectively.
You may also select a device and then Goto. This way you start navigating towards the selected Flarm
device for as long as it is within range. When it goes out of range, the aircraft symbol for that device will
start blinking for a default period of 120 seconds. After that the target becomes blank and the device is
removed from the maps and lists.
See also:
Getting Started > Flarm Radar
Settings > Flarm 101
3.1.3
31
Airspace
A tap on an airspace brings up a dialog where you can read the information on the airspace.
By default this page shows all airspace within a certain margin around the area of your tap. You can
quickly change the status of any of these airspaces by using the buttons for disabling an airspace for
Always, Today, 5 minutes or turning them back on with the Activate button.
By turning on the Show all checkbox all airspace from the airspace file is listed. This helps you turn
remote airspaces on or off. It also helps you to turn several airspaces off quickly. Note that Multiselect
feature works in this dialog meaning that you can select as many airspaces as you wish.
3.1.4
Task
A tap on the Assigned Area sector brings up a dialog where you can graphically move the navigation
point to any place inside the area. Relevant information on the task is displayed below the sector.
To navigate to any place outside the Assigned Area which is not in the Waypoint database, use the Menu
> Task > Map dialog.
© 2003 - 2013 ... Naviter d.o.o.
Map page
3.2
41
Glider position
The symbol always represents the current position of the glider. The nose of the symbolic aircraft is
pointed in the direction of the movement of the glider.
Tap and hold aircraft symbol to move its current position. You will want to do that if you wish to have a
different view of the map.
If the glider symbol is flashing, GPS reception is BAD. Have a look at what's wrong (connectors, cables,
battery...)
You can choose from several airplane symbols through Menu > Settings > Symbols
3.3
88
Arrow towards the North
Map orientation 52 in SeeYou Mobile is not always "North up" It can be anything, therefore the North
arrow is always pointed in the direction of true North. By tapping the North arrow a menu will open up
where you can select any of the other possible Map orientations.
North, East, South and West Up, will rotate the map so, that the selected orientation is towards the top
of the screen.
Goal Up will put the direction of the Selected Goto Waypoint to the top of the screen. Track Up will put
the direction of the current track towards the top of the screen.
When panning the map freely, the arrow gets a caption "Pan mode". Tapping once on this symbol
returns the view back to the glider and original map orientation.
© 2003 - 2013 ... Naviter d.o.o.
42
SeeYou Mobile
See also:
Map orientation
3.4
52
Wind vector
The wind vector gives you a graphical and textual orientation about the wind at current height. It is
measured in different ways depending on what data is available to SeeYou Mobile.
A tap on the Wind symbol will open the Wind dialog. You can also access it through Menu > Wind
3.5
55
Glideslope indicator
The glide slope indicator displays whether or not the position the glider is navigating to is enough to
reach the goal or not.
Tap on this control brings up the Flight parameters
Ballast and Altitude reserve can be set up.
56
dialog where Altitude, QNH, MacCready, Bugs,
1. Arrows indicate whether or not you are below or above glideslope. Each arrow presents 1 degree
above or below glideslope.
2. Red number (not always visible) indicates how much altitude you are missing to fly over the terrain
straight ahead of you.
3. Number in the middle is MacCready setting.
4. Number below MacCready tells you how much altitude is required to reach the selected waypoint.
Negative values mean that you have to climb, positive values mean you have enough altitude.
In addition to that, two more sqares are displayed on the Target line which help you understand how you
are doing in the flinal glide:
1. Yellow square marks the position from which you can reach the selected Waypoint (or task finish)
from your current altitude at MacCready ring set to zero.
2. Green square marks the position from which you can reach the selected Waypoint (or task finish) from
your current altitude at your current MacCready setting.
These two squares represent final glide to task finish point if selected waypoint is part of the task.
3.6
Speed to Fly indicator
Speed to Fly indicator gives you a graphical display for Speed to Fly. Black line pointing down means you
should fly faster while a black line pointing up means you should slow down.
Fly faster:
Fly slower:
Please note that the Speed to Fly indicator and navbox present theoretical data, not counting the current
© 2003 - 2013 ... Naviter d.o.o.
Map page
43
sink rate of the airmass.
3.7
Vector map
SeeYou Mobile uses the CIT maps to display terrain and topographic features. These are the same maps
also used in the desktop version of SeeYou. Map preferences can be setup through the Setup Map 77
dialog
3.8
Flight trace
The recently flown glider trace is optionally displayed behind the glider. Preferences can be set up
through the Settings > Flight dialog 81 . The trace can be colored in vario readings if "Show vario" option
is checked in Settings > Flight 81 dialog.
When trace is colored to "Show vario", colored boxes represent:
. Red = climb better than the current MC setting
. Yellow = climb less than MC, but between MC and MC - 0.5m/s
. Blue = Climb less than MC - 0.5m/s
3.9
Terrain collision
SeeYou Mobile tells you whether or not you can fly over the terrain straight ahead of you. If you can't,
the red square represents the point of collision with the rocks and the height at which you will reach the
terrain. Red number above the MacCready value tells you what altitude you are missing to clear the
obstacle if you fly straight to the goal.
© 2003 - 2013 ... Naviter d.o.o.
44
3.10
SeeYou Mobile
Airspace warning
SeeYou Mobile tries to estimate your position in the future and give you comprehensive warnings before
you enter airspace.
Please read How Airspace warning works
3.11
19
from the Getting Started chapter.
Navboxes
SeeYou Mobile supports several Navigation boxes. You have full control over which Navboxes you wish to
display, how large they should be and where they should be located.
Navboxes are setup separately for Map 1 and Map 2 views. That is because normally you will want to use
the two map views for two different reasons. One could be general navigation while the other one is
approaching the waypoint where details are important. You will require two different settings for which
Navboxes should be displayed in these conditions.
See Also
Settings > Navboxes
3.12
84
Animation speed
When in File reader mode 93 , you can control the speed and position of the airplane symbol by jumping
around the replayed IGC file. Tap on the animation rate box in the upper right corner of the Map page to
open this dialog.
Pause button will pause the animation
© 2003 - 2013 ... Naviter d.o.o.
Map page
45
Rate box controls the speed of the animation. The higher the number, the faster animation, the slower
refresh rate for the Map page. Pocket PC reaches its limits here.
Slider allows you to quickly jump to a point within the flight.
3.13
Task bar
The header line displays several important information.
The first word tells you which Input mode you are in. It can be either Serial where GPS status is
displayed. NODATA means that no data is avilable on the COM port. BAD means that no satellites have
been caught, but there is connection to the GPS unit. 3D/X means that the GPS signal is good and X will
tell the number of satellites. Note that not all GPS units send the data about the satellites through the
NMEA output, so this number could be 0, but the application will still work as expected.
It can also be SIM or FILE depending on the settings in Settings > Input
3.14
93
menu.
Command bar
The bottom line of SeeYou Mobile window is the Menu. It is optional (it can be disabled through Settings
> Miscellaneous 103 ).
What it does is it adds 5 more shortcut buttons available in addition to all the hardware buttons on the
PDA device. You can setup what each of the buttons in the Menu does through the Settings > Commands
95 dialog. Change the actions for Toolbtn1 through Toolbtn5.
© 2003 - 2013 ... Naviter d.o.o.
Part
IV
Information page
4
47
Information page
This page gives you some very general information about your position. Use it to report your landing
position or check if everything is setup OK.
The Status panel gives information about GPS and additional pressure data if they are available.
Something like GTWAV may be listed after the GPS status message where
G=
T=
W=
A=
V=
Position panel shows present position, local date and time and Team code if setup.
Altitude panel shows Altitude QNH, Flight Level altitude and Height over ground
Sunrise and Sunset panel shows local sunrise and sunset (UTC Offset must be set correctly).
© 2003 - 2013 ... Naviter d.o.o.
Part
V
Statistics page
5
49
Statistics page
The statistics page gives you detailed information on Thermals and the flight. To change the content of
the statistics pane, tap on it to switch between
. Flight statistics
. Task statistics
. last 60 minutes statistics
Thermals panel graphically displays the last four thermals where the left most is newest. At the top of
each bar you can see the Thermal average. The height of each bar represents the entrance and
departure from each thermal relative to the other four. The number on the right is average for the last
four thermals. Use it for your MacCready setting if you wish.
Flight statistics gives averages for the Lift, Average speed, Distance flown, circling percentage and
duration of flight. Distance is the same as Optimized distance in the "Opt" navbox.
Task statistics gives averages achieved since the start of the Declared task 21 .
Last 60 minutes statistics gives averages achieved on the Declared task 21 or the Optimized task in
the last hour.
© 2003 - 2013 ... Naviter d.o.o.
Part
VI
Menu
6
51
Menu
The menu offers shortcuts to many features a pilot will want to access quickly. Buttons are large and well
readable. There are two pages of the menu located one next to the other:
Page 1:
. Esc 52
. < Prev and Next > 52
. Settings 77
. Display Options 52
. Map orientation 52
. Add Waypoint 53
. Zoom 54
. Wind 55
. MacCready & Altitude
. Goto 58
. Task 64
Page 2:
. About 71
. Exit 72
. Save Settings 74
. Team 73
. Thermal Assistant
. Flarm points 74
. Switch Profile 75
. ConnectMe 75
. Logbook 75
56
90
Note that this is the default order of the Menu. It can be changed through the Settings > Menu
© 2003 - 2013 ... Naviter d.o.o.
96
dialog.
52
6.1
SeeYou Mobile
< Prev and Next >
These buttons show the next and previous page in the Menu
6.2
51
.
Esc
The ESC button in the menu returns the view back to Map view.
6.3
Settings
The Settings button in the Menu opens the Settings dialog
Mobile can be setup.
77
where all of the preferences of SeeYou
Note that some settings like Map and Navboxes are separate for Map 1 and Map 2 views while others like
Units, Commands etc. are unique through the whole application.
6.4
Display options
You can control what is visible on the Map page 36 . By default, a shortcut to this dialog is placed on the
Command bar which shows the first letters of some items (MAWT). All items which can be made visible
or invisible in SeeYou Mobile are listed in this dialog:
6.5
Map orientation
Opens a dialog which lets you choose from these different map display options:
. Circling North map is turned track up in straight flight and north up when circling
. North Up where top of the display is always true North
. East Up where true East is at the top of the screen
. South Up where true South is at the top of the screen
© 2003 - 2013 ... Naviter d.o.o.
Menu
53
. West Up where true West is at the top of the screen
. Goal Up sets up the display so, that the point you are navigating to is always at the top of the screen
. Track Up puts your current track towards the top of the screen
. Heading Up puts your current heading towards the top of the screen. Heading is calculated by
subtracting Wind vector from the Track vector
. Pan mode is a special mode where you can freely move around the map, zoom in, zoom out and
rotate the map to explore some details along the course.
To move around the map in Pan mode you simply drag your finger over the screen and the map will
follow your finger. To rotate the map drag your finger in the bottom 10% of the screen left/right. The
map will again follow your finger, but this time it will rotate around the center point of the screen.
To return back to the location of the glider you need to tap on the North Arrow 41 which now includes
the caption "Pan mode". That will move the view back to the glider and will change the Map orientation
back to what it was before you started to pan.
There is a shortcut for this dialog if you tap with your finger on the North Arrow indicator.
See also:
North arrow symbol
6.6
41
Add Waypoint
You may edit and delete waypoints on this screen.
This window opens when you tap Menu > Add Waypoint or use the shorcut on a hardware or software
button. By default, add waypoint is connected to the Enter command on the 5-way Navigation button
which is present on most of the Pocket PCs today (not so on old Aero 1550).
Use the ++, +, - and -- buttons to change values quickly and without the use of the keyboard.
Click GOTO if you would immediately like to navigate to the newly created waypoint. The reason for this
© 2003 - 2013 ... Naviter d.o.o.
54
SeeYou Mobile
feature is to be able to come back to the current position with as few clicks as possible. Tipically when
trying to center a wave updraft.
See also:
Edit Description
Details overview
6.7
59
Zoom
The Zoom dialog lets you choose from several predefined values (depending on the units). The value
represents the width of the SeeYou Mobile window.
2km, 5km ... 35km, 50km ... are fixed zoom settings. Setting represents the width of the Map window.
Depending on the units, it can be in either kilometers, statute or nautical miles.
Target is a special kind of Zoom where the application determines what width of the Map window to use
to keep the target and the sailplane on the screen all the time.
© 2003 - 2013 ... Naviter d.o.o.
Menu
6.8
55
Wind
This dialog lets you see the wind in the third dimension as well as quickly adjust the wind for either one
or several layers.
To change the wind,
1. select a layer or several layers by dragging over the left side of the dialog
2. draw a wind vector in the square in the lower right corner
3. longer line means stronger wind. Direction of the movement determines direction of the wind
4. If needed, adjust Direction and Speed with the buttons in the lower part of the display
5. tap Apply, then OK.
Wind is calculated using three methods in SeeYou Mobile
. Position drift when Lat/Lon are the only available data
. Groundspeed difference when groundspeed and track are received from the GPS
. Combination of Groundspeed and straight flight when true air speed is received from the instrument. In
this case, the wind is updated in straight flight as well.
© 2003 - 2013 ... Naviter d.o.o.
56
6.9
SeeYou Mobile
McCready & Altitude
This menu item opens the Flight Properties dialog box which lets you enter
. Take-off altitude
. QNH
. MacCready setting
. Bugs
. Wing loading
. Altitude reserve
. Volume
. ETE
. Soaring time
Take-off altitude
By changing this setting you can change your take-off altitude. Setting up this value correctly is essential
for correct final glide indications. When there is a waypoint or the terrain map with elevations in vicinity,
there is a suggestion at what to set up in the top line of this dialog.
QNH
By changing the QNH value you can change the pressure at start or change the QNH in flight to correct
the change in pressure
Linked
Whether this value should be linked or unlinked depends on whether pressure altitude or just GPS
altitude is received from the device.
When pressure altitude is transmitted, you should setup the two values for Altitude and QNH
independently (unlinked). Link them when done. When airborne you may change one value and the other
one will change accordingly. Example: when the weather report states QNH 1015 while your setting is
1020, you can change QNH setting to the correct value 1015 and simultaneously change the Altitude to
the correct value.
© 2003 - 2013 ... Naviter d.o.o.
Menu
57
When only GPS altitude data is available, you should wait until the altitude reading is stable. Change the
altitude to the correct altitude and leave the "linked" checkbox unlinked. The GPS altitude accuracy
depends on the GPS device. Some devices send a corrected ellipsoid value while the others send
uncorrected values.
MacCready
You can setup the MC setting here. The optimum value for the MC setting can be derived from the
statistics page and other Navboxes.
Bugs
By changing the Bugs value you can degrade the performance of the polar by a certain percentage.
Load
This value sets up the wing loading parameter. Next to the brackets you can read the "overload" value.
Altitude reserve
All final glide calculations are subject to correction of the altitude reserve. If this value is greater than 0,
then your arrival altitude to the waypoint will be this much above the altitude of the waypoint elevation
from the waypoint database (this may not be its actual altitude, so use at own risk, needless to say).
Volume
This property is only used when connected to a variometer which is capable of receiving commands for
changing the Vario volume. Such instruments are LX 1600 and Cambridge 302.
ETE
Pressing the button you may choose from four different ways to calculate estimated time of arrival to the
airport. Calculation is always divided into straight flight and climb time calculations.
1. MC uses the Polar data and MacCready setting to calculate speed to fly and climb rate.
2. Vario uses the last four thermals average to compute climb rate and uses this value to calculate speed
to fly.
3. Avg Speed & Vario uses the average groundspeed over the last 5 minutes for distance and Vario
statistics for climb rate.
4. Avg Speed & MC uses the average groundspeed over the last 5 minutes for distance and MacCready
setting for climb rate.
You may disable "use altitude difference" if you know you will not climb anymore.
Soaring time
Lets you enter your soaring begin time manually. This is useful for motorgliders, since none of the
instruments send ENL data over NMEA.
Buttons at the bottom will help you enter the correct values by simply using your fingers.
© 2003 - 2013 ... Naviter d.o.o.
58
6.10
SeeYou Mobile
Goto
The goto dialog allows you to select the "Navigate to" point quickly. There are several ways to access this
dialog:
Tap on the map
Brings up the Goto dialog. Waypoints are sorted on distance from the point where the tap happened on
the Map screen. This way it is easy to select the waypoint you were trying to "tap" even though you
couldn't tell them apart in the Map view due to the Zoom level.
Through the menu
If the Goto dialog is accessed through Menu > Goto, waypoints are sorted first on type, then distance.
This is the Near Airport function of SeeYou Mobile.
Through the Command bar
By default, the Goto icon is displayed in the Command bar.
Landable waypoints which can be reached with the current MacCready setting are colored green.
Landable points which can be reached with MacCready setting zero are colored yellow while the others
are not colored. The glideslope calculation considers the altitude reserve if entered in the Flight
Properties 56 dialog.
There is more columns available than they are seen by default. Arrival height and L/D to the point are not
visible. Make the existing columns thinner to see the others. You may then reorder them by dragging the
column header to a new location.
Pressing the Details button will open a new window where you can read waypoint details and edit
waypoint properties. It will close automatically after 10 seconds or when you press the OK/Goto button.
Since the waypoint list may be huge there is a quicker way to accessing a particular point alphabetically
by Filtering 61 the points. When the waypoints are filtered, the Filter caption is highlighted in the
© 2003 - 2013 ... Naviter d.o.o.
Menu
59
command bar (see screenshot below).
At the bottom of the screen, immediately above the menu, three recently used waypoints are displayed.
Landable points are colored green or yellow if they are reachable. At the top of the screen you can
choose between clearing the target all together, navigating back to takeoff location or back to Soaring
begin (useful for closing a triangle for example).
See also:
Details overview 59
Edit Waypoint 60
Edit Description
Waypoint filter 61
6.10.1 Details overview
This window opens when you click on the Details menu option in the Goto 58 dialog or Cursor Info Waypoints 38 dialog. It displays the general information about a waypoint.
It also allows you to edit and delete waypoint properties on pages Edit Waypoint 60 and Edit Description.
You can access these pages with the ">>" and "<<" buttons in the command bar.
© 2003 - 2013 ... Naviter d.o.o.
60
SeeYou Mobile
See also:
Goto dialog 58
Details overview 59
Edit Waypoint 60
Edit Description
Waypoint filter 61
6.10.2 Edit Waypoint
You may edit and delete waypoints on this screen.
This window opens when you click on the Details menu option in the Goto
Waypoints 38 dialog and press the ">>" button once.
58
dialog or Cursor Info -
Use the ++, +, - and -- buttons to change values quickly and without the use of the keyboard.
© 2003 - 2013 ... Naviter d.o.o.
Menu
61
See also:
Goto dialog 58
Details overview 59
Edit Waypoint 60
Edit Description
Waypoint filter 61
6.10.3 Waypoint filter
Since SeeYou Mobile may use multiple files as the input for waypoints there is need for a simple way to
filter the waypoints so that only those waypoints are presented which are of the most interest for the
user.
Three filters are available in order for you to organize your waypoints in a more readable way:
. Alphabetical filter
. Filter by waypoint type
. Filter by file
Alphabetical filter allows you to simply enter the waypoint's name. As soon as the list of waypoints is less
than the length of the screen filter closes and you may choose the waypoint that you were looking for
from the list that matches the filter you have entered. The screenshot below left displays such filter with
the letters "MAL" already entered. The result is a list of all waypoints that begin with MAL (see
© 2003 - 2013 ... Naviter d.o.o.
62
SeeYou Mobile
screenshot on the right):
Filter by waypoint type allows you to select which types of waypoints will be displayed in the Goto dialog.
In the example below, the button "Landable" was pressed and only landable types of waypoints remain
selected and will be displayed in the Goto dialog 58 :
Filter by file allows you to show or hide waypoints that are stored in separate files. In the example below
only two out of four waypoint files that were selected through Settings > Files 96 will be displayed in the
Goto dialog 58
© 2003 - 2013 ... Naviter d.o.o.
Menu
© 2003 - 2013 ... Naviter d.o.o.
63
64
SeeYou Mobile
See also:
Goto dialog 58
Details overview 59
Edit Waypoint 60
Edit Description
Waypoint filter 61
6.11
Task
The task dialog allows you to edit and enter the task in list view. There is a shortcut to this dialog in the
Command bar.
© 2003 - 2013 ... Naviter d.o.o.
Menu
65
You can edit the task either in
. List view 65
. Map view 66
6.11.1 List edit
Entering the task is best done in list view. You may enter waypoint names using the Pocket PC keyboard.
Open the keyboard (or letter recognizer) to start entering waypoint name. SeeYou Mobile will
automatically suggest the first waypoint in alphabetical order. Use the right/left button to change
waypoint name in alphabetical vicinity of what you had entered. Up and down keys change between
turnpoints.
By pressing the enter key or tapping on the Edit button Edit point 67 dialog opens where you can setup
preferences of the observation zone. Use Insert and Delete buttons to change the Task.
From the command bar you can choose
. OK to accept any changes
. Cancel to discard any changes
. Tools to Edit point 67 , Delete point, Insert point, Move point up and down, Invert task, Load
task 68 , Save task, Delete task or setup Task Options 69 .
. Map 66 to change to graphical view.
© 2003 - 2013 ... Naviter d.o.o.
66
SeeYou Mobile
A warning dialog will be issued if finish altitude is set to zero. This is to protect you from making final
glides to the wrong altitude.
6.11.2 Map edit
The same simple philosophy from graphical task editing in SeeYou has been implemented in the pocket
software.
Tap & Move anywhere except on a waypoint to move the map.
Tap & Move on a Waypoint to move it. FAI Area is drawn to easily fly an FAI Triangle
Tap & Hold on a Waypoint to delete it from the task.
Tap & Hold on a Leg to insert a point to this leg.
Tap & Hold anywhere on the map except on a leg and on a waypoint to append a waypoint to the end
of the task.
. Use Zoom (200km) to change zoom, then Tap&Move the map to pinpoint the position of the free
waypoint.
. OK to accept any changes
. Cancel to discard any changes
. Edit to Edit point 67 , Delete point, Insert point, Invert task, Copy task 68 , Delete task or
setup Task Options 69 .
. List 65 to change to graphical view.
© 2003 - 2013 ... Naviter d.o.o.
Menu
67
6.11.3 Edit Point
Point
Choose the waypoint name. Note that the easiest way to do this is by typing its name in List view
65
.
Elev = Elevation
This is the reference altitude for the point in question. This is the altitude that is taken into account when
calculating the final glide.
Direction
This option changes the direction of the observation zone. It can either be towards the Next or Previous
point, a Fixed value (Angle12) or Symmetric to the courses in and out of the waypoint.
Angle12
If Fixed value is selected from the Direction combo box, a direction of the sector will be symmetrical to
this value.
Radius1, Angle1, Radius2 and Angle2 will setup the sector in the same way as already used to in the
desktop version of SeeYou.
Assigned Area check box tells SeeYou Mobile the type of task
© 2003 - 2013 ... Naviter d.o.o.
68
SeeYou Mobile
Line only can be selected for start and finish points only.
Buttons at the bottom will help you enter the correct values quickly with your fingers. The DEF button
will change values to the default ones.
6.11.4 Load task
Load task dialog is accessed through Menu > Task > Tools > Load task... You can access it through both
List 65 and Map 66 view of the Task.
Select a task from your database and press OK to make it your active task. Press Cancel to discard any
changes. You pressed Help to get here.
© 2003 - 2013 ... Naviter d.o.o.
Menu
69
6.11.5 Task options
Task options dialog is accessed through Menu > Task > Tools > Options...
You can name a task. This is particularly useful at a competition briefing where you can name it Task A
and Task B.
Task time is essential for flying the Assigned Area tasks. It is used to calculate required speed to finish
as well as time difference on task.
The MC (MacCready) panel allows you to set your average lift in the edit box and see what your
theoretical speed will be if you fly according to the MacCready theory.
The Auto advance check box will automatically move the navigation point to the next point from the
Task if checked. In case of an Assigned Area sector, the "Navigate to" point will remain the same, but
statistics and distance to finish will be moved to the next point.
When Finish is 1000m below start is checked, the altitude of the finish point is automatically moved to
Start altitude less 1000m. This is useful when flying FAI badge and record flights.
Use the + and - buttons to quickly change values.
© 2003 - 2013 ... Naviter d.o.o.
70
SeeYou Mobile
6.11.6 Upload Task declaration
You can declare the task directly into the supported devices. This allows you to change the task literally
seconds before takeoff without even changing the cables. Do this:
. go to Menu > Task
. Options > Load task > select a new task which you would like to fly
. Press the "Upload" button
Some flight recorders require input from the pilot to get connected (such as pressing a key, restarting
the logger or such). After the communication is established, the following data is transfered automatically
to the flight recorder:
. Declared task in SeeYou Mobile which you have entered in Menu > Task
. Glider information which is entered in Menu > Settings > Polar (glider type) and Menu > Settings > Log
(glider registration)
. Pilot name as entered in Menu > Settings > Log
Reset device is available only for selected devices which do support this action. Volkslogger as an
example will cycle the power and return to the navigation mode after this action has completed.
When the action Close when upload is completed is checked, the Upload dialog will close upon
competion of the upload.
© 2003 - 2013 ... Naviter d.o.o.
Menu
71
6.11.7 Multiple start points
If you wish to use the multiple start points option please enter all avaialble start points for selected day in
Menu > Task > Tools > Start Points. Valid start will be detected from any of these start points.
6.12
About
Through the About dialog you can enter the registration key. It will then display your serial number and
the date until you can upgrade SeeYou Mobile free. Upgrades are available through http://www.naviter.
com
© 2003 - 2013 ... Naviter d.o.o.
72
6.13
SeeYou Mobile
Exit
Pressing this button quits the application.
Before you exit, the program will ask you whether or not you wish to:
. save the current profile changes
. save changes to the waypoints and tasks
. save changed or added Flarm aliases
. Finish the flight by signing the IGC file with SeeYou G-record
© 2003 - 2013 ... Naviter d.o.o.
Menu
6.14
73
Team
The Team feature in SeeYou Mobile will help you find or hide your teammate. It lets you share your
position with other pilots and even encrypt this information so that your competitors won't be able to
decode it.
To use it:
. Enable the "Team Position Code (Team)" Navbox in Menu > Next > Navboxes 84 . Or use Menu > Next
> Team from the main menu.
. Go to the map view and tap on the Team navbox.
. Team dialog opens. You need to press Setup before first use.
. Press Select to select a source waypoint for the calculation. It is imperative that your teammate does
the same.
. If you would like to hide the information from others, enter the Encryption key. Again, both or all pilots
have to share the same key.
Go fly. When asked about your position, answer "One-Kilo-Bravo-Yankee". Your teammate will tap the
Team navbox, enter the code and say "Thanks" while others won't have a clue unless they have the
key :)
© 2003 - 2013 ... Naviter d.o.o.
74
6.15
SeeYou Mobile
Save Settings
Once you have setup SeeYou Mobile for your flight you may want to save the settings without exiting
SeeYou Mobile.
6.16
Flarm points
Shows a list of currently visible Flarm targets. You can choose one to navigate to by pressing Goto or
edit the properties of that point by choosing Edit.
© 2003 - 2013 ... Naviter d.o.o.
Menu
6.17
75
Switch Profile
The switch profile icon shuts down SeeYou Mobile and runs it again so you can choose another profile.
See also
Using Profiles
6.18
13
ConnectMe
Shuts down SeeYou and runs ConnectMe to download flights from your logger or vario. After exiting
ConnectMe it runs SeeYou Mobile again.
6.19
Logbook
The logbook displays a list of flights written by your SeeYou Mobile. It also displays information about the
glider and the pilot if it is stored in the IGC file.
© 2003 - 2013 ... Naviter d.o.o.
Part
VII
Settings
7
77
Settings
The Settings dialog has an array of Pages where all of the SeeYou Mobile preferences can be setup.
Note that some settings like Map and Navboxes are separate for Map 1 and Map 2 views while others like
Units, Commands etc. are unique through the whole application.
Available pages are
. Map 77 where display of the vector map is setup
. Airspace 79 where display of airspace and airspace warning is setup
. Waypoints 80 page controls the way waypoints are displayed
. Flight 81 page sets up the trace, vario colors of the displayed trace
. Opt 82 page (short for Optimization) lets you setup how the optimizations are calculated
. Task 83 page sets up the observation zones and other task options
. Navboxes 84 page lets you choose which navboxes to display and control their appearance
. Symbols 88 page allows you to choose from symbols for the map display
. Warnings 89 page sets up airspace and altitude warnings
. Thermal 90 page sets up the Thermal assistant
. Polar 91 page has all the controls to choose the polar for your glider
. Units 92 by your preference
. Fonts 93 page changes the appearance of the text on the screen
. Input 93 page lets you select between GPS, Simulator and File replay mode
. Commands 95 page reassigns tasks to all buttons of your PDA and SeeYou Mobile
. Menu 96 page lets you control the content of the main Menu
. Files 96 page has shortcuts to the terrain, waypoint and airspace files
. Log 98 page sets up the header for the IGC file
. User interface 99 is short for User Interface
. Flarm 39 page is where you can control how Flarm data is presented on the screen
. Miscellaneous 103 page has all the rest
. Hardware 103 page controls communication to GPS with proprietary sentences
. LX 1600 105 pages control preferences of the LX 1600
Once you are in the Settings dialog you can use the big Left/Right button on the PDA to change between
pages. If you press and hold it, it will scroll through the pages. If you need to quickly find the last page,
just press and hold it until it's there.
7.1
Map
This dialog allows you to setup the appearance of the map in Map view 36 . SeeYou Mobile uses CIT
maps for rendering the terrain. It is the same map as in the desktop version of SeeYou.
Show map check box will enable the display of the Vector map if checked.
Terrain
You can choose from several levels of detail of the terrain which is being rendered. When terrain is Off,
you will still see Water bodies, Roads, Railroads, Towns and labels on the screen. With the setting at
Low isolines will appear at approximately 300m each. With the setting at Medium, isolines appear at
about 100m. With the setting at High, you get exactly what you are used to in the desktop SeeYou
version. We recommend using Medium setting for the older 200MHz processors while the new 400MHz
processors are fine with the setting at High.
Scheme
© 2003 - 2013 ... Naviter d.o.o.
78
SeeYou Mobile
Several color schemes are preloaded in a new installation. It is easier to see how each one looks if you
look at it in the desktop SeeYou. We recommend "Hight contrast" for mountaneous terrain, ICAO for just
general navigation and Open Street Maps color scheme for the Flatlands.
If Custom color scheme is chosen you get to define your own colors and other properties for the map
objects.
7.1.1
Scheme properties
Scheme Properties dialog lets you change the color scheme for Vector map elevations and properties for
the topographic features of the map.
Due to the very faint Pocket PC screens we have designed some extra bright schemes which should let
you help see the valleys and mountain tops better. Note that you can also copy Altitude color settings by
transferring them through the Mobile Wizard 9 .
This is how you can change colors of the color scheme through this dialog:
. Click on an altitude bar on the left
. Change its color through the "Color at X meters" combo box where X is the elevation you selected.
. Repeat this for about 4-6 different altitudes
. Use the stylus to drag from one selected altitude to another
. Press Spread
. Repeat this for all of the intervals you have designed.
Object properties allows you to change the zoom level and color for each of the topographic features
in the combo box.
Draw surface objects will enable drawing woods and grass fields if newer Open Street Maps are
used.
Use Relative coloring checkbox will allow you to color your present altitude in always the same color.
© 2003 - 2013 ... Naviter d.o.o.
Settings
79
This feature is really a sort of graphical ground collision warning. To see how it works, select the
"Relative" color scheme from the Schemes combo box.
Google the internet to find out more about color coding the maps. It is a science of its own.
7.2
Airspace
In this dialog, you can setup airspace display and Warnings.
In the Type panel you can setup how airspace is displayed. You should setup each type of airspace
separately. Choose an airspace type from the drop down list. Choose until which zoom level it is visible
from the Zoom drop down list. By checking the Warn me check box you will be warned before entering
this type of zone. Choose whether or not a zone should be filled from the Fill drop down list. Chose a
Color for the airspace type from the drop down list.
Each airspace may be presented with its label (name). Choose until which zoom this label is visible from
the Labels zoom drop down list.
If Fill alarmed zones is checked, airspaces for which an alarm was triggered will be colored
transparently.
If Hide inactive zones option is checked, then an airspace zone will be hidden from the Map page
when dismissed.
If Show airspace check box is checked, then airspace will be displayed in the Map view 36 .
Combo box Hide airspace above enables you to exclude airspace with lower limit higher than the
height you select to show on the map screen. This helps declutter the screen in complex airspace.
© 2003 - 2013 ... Naviter d.o.o.
80
7.3
SeeYou Mobile
Waypoints (Wpts)
The Waypoints dialog allows you to control how waypoints are displayed. Each waypoint consists of
. Waypoint symbol
. Label one
. Label two
Type panel allows you to select the type of waypoint. Several types are available. Each type has its own
waypoint symbol.
Zoom sets up until which zoom a waypoint label is visible.
LabelOne chooses what parameter is displayed in the Label one caption. LabelTwo chooses what
parameter is displayed in the Label two caption.
Length chooses how many characters of each waypoint name are displayed in Label one or two.
Colorize label one/two will color the selected label with green or orange depending on whether or not
this waypoint is within glide slope. Green if it is within glideslope of the preset MC value. Orange if it is
within glide range of MC set to zero.
Single line label will display the label one and two in a single line.
Max number of visible symbols lets you setup how many waypoint symbols you wish to have
displayed with their icons before they become points.
Cursor sort allows you to select how the waypoints are sorted when you use the Up/Down key (by
default) to change the Target waypoint. The default setting is that waypoints are sorted on Name, but
you can select to sort them either on Name, Code, Style, Course, Distance, Arrival Alt, Required L/D or in
the same order as currently selected in the Goto dialog.
© 2003 - 2013 ... Naviter d.o.o.
Settings
81
Show waypoints checkboxs lets you turn waypoints on/off.
Defaults button will return factory settings if pressed.
7.4
Flight
Setup the appearance of the flight on Map page.
Track panel
lets you choose the Color and Width of the trace of the flight through the combo boxes. Choose the tail
Length in minutes. If Show vario check box is checked, then the flight track is colored with vario
readings. If Show track checkbox is not checked, then the trace will not be drawn.
Show current track vector lets you draw a line ahead of the glider to show your projected flight path
if you continue to fly the current track. You may change the Color, Width and Length of the line
through the combo boxes. You may choose to disable the display of the current track vector by disabling
the option Show current track vector.
Target is a straight line that connects the glider's current position with the selected navigation goal. In
the Target panel you can select the Color and Width of this line through the combo boxes. You can also
choose to show or hide the Terrain colision point and the target line itself. The Terrain colision marker
is a red square which is only displayed when there is not enough altitude to reach the target with the
current glider settings.
© 2003 - 2013 ... Naviter d.o.o.
82
7.5
SeeYou Mobile
Opt
Optimization panel lets you select the Color and Width of the optimized track. Nr. of points (5 is for
Online Contest, 3 for Net Coupe) and whether or not the Optimized track is shown.
FAI Area panel largely influences the behaviour of the FAI Triangle Assistant.
You may choose the Color and Fill for the FAI Area. Show area checkbox determines whether or not
the FAI area will be displayed in the first place. Note that you can control this option much more
conveniently through the Display Options 52 dialog.
The Rotate button will change where the FAI Area is drawn. If the currently flown triangle is not deep
enough it will switch sides over the longest currently flown leg, giving you the option to fly the triangle in
the left or right direction. Once the Triangle is deep enough, it will rotate between the legs so you can
accurately determine where to fly.
Rotate on click refers to the FAI Area when it is drawn on the moving map. A tap on the are will rotate
the area as described above.
Show km. lines will draw the curves connecting locations where the triangle has the same distance.
Example shows kilometer lines for Triangles between 160 - 280 km. If you fly into the violet area, the
triangle will be an FAI triangle.
© 2003 - 2013 ... Naviter d.o.o.
Settings
See also:
. FAI Triangle Assistant
7.6
83
28
Task
Observation zone properties are setup with the same philosophy as in SeeYou. You can setup Fill and
Color properties for the display of the observation zone on the Map page.
You can separately design the Line only, Direction, Angle12, Radius1, Angle1, Radius2, Angle2
properties for the Start, Waypoint and Finish points.
Observation zone style lets you choose the color and width for the waypoint sector. Observation
zone fill determines whether or not the sector should be displayed filled or outlined.
Task style lets you choose the color and width for the line connecting the task waypoints.
Show task will show or hide the task from the Map page.
© 2003 - 2013 ... Naviter d.o.o.
84
7.7
SeeYou Mobile
Navboxes
Navigational boxes are one of the most important parts of SeeYou Mobile. They show all parameters of
flight. You have full control over which Navboxes you wish to display, how large and how transparent
they should be and where they should be located.
Navboxes are setup separately for Map 1 and Map 2 views. That is because normally you will want to use
the two map views for two different reasons. One could be general navigation while the other one is
approaching the waypoint where details are important. You will require two different settings for which
Navboxes should be displayed in these conditions.
Through this dialog you can select which of the available Navboxes you wish to display on the active map.
The Combo box allows you to choose from a sub-group of navboxes so you can more easily select or
change the ones you want. One sub-group is also "Currently visible navboxes" for example.
Navigation navboxes:
. Target name (Target) = Name of the selected waypoint
. Distance to target (Dis) = Distance to the selected waypoint
. Steering course (To) = Difference in degrees between Bearing to target and Track over ground
. Bearing to target (Brg) = Direction towards the selected waypoint
. Magnetic bearing to target (MagBrg) = Magnetic course to fly to get to the target
. Track over ground (Trk) = Direction of the flight (true)
. Magnetic Track over ground (MagTrk) = Current magnetic course of flight
. Radial (Radial) = Magnetic direction from the waypoint to the current position
. Speed over ground (GS) = Groundspeed. This value is negative if the difference between heading
and track is more than 90 degrees
. Local time (Time) = UTC time from GPS corrected by time zone set in the Pocket PC
. Arrival time (ETA) = Estimated time of arrival to the selected waypoint
. Estimated time enroute (ETE) = Estimated time to go to selected waypoint
. Nearest outlanding (Near Outl) = Name of the nearest outlanding. Tapping on this navbox opens
© 2003 - 2013 ... Naviter d.o.o.
Settings
85
waypoint properties dialog.
. Nearest airport (Near Apt) = Name of the nearest airport. Tapping on this navbox opens airport
properties dialog
. Inverted Distance to target (DisInv) = Distance to selected target in inverted units as currently
selected units. If your units are kilometers, this distance will be in nautical miles
. Team position code (Team) = Code you need to tell to your teammate 73 so he can locate you easily
. GPS Status (GPS) = It displays the status of the GPS signal. It can be either NODATA, BAD, OK, 2D,
3D/x
. Battery info (Bat) = Displays battery status. It can be either Full, Chrg (Charging), Ext (External) or a
percentage value of the battery status
Altitude navboxes:
. Altitude QNH (Alt) = Altitude above sea level
. Flight level (FL) = Altitude above standard atmosphere pressure
. Height AGL (Agl) = Altitude above the ground elevation vertically below the glider position
. Altitude m QNH (Alt m) = Altitude in meters QNH regardless of the units you are currently using
. Altitude ft QNH (Alt ft) = Altitude in feet QNH regardless of the units you are currently using
. Ground elevation (Gnd) = Terrain elevation vertically below the glider position
. Arrival altitude (Arrival) = Expected Arrival altitude at the selected waypoint calculated by taking the
distance, MC, wind, glider polar, bugs and ballast into account. It is corrected for reserve altitude.
"Arrival altitude" will be positive when the glider is above the calculated glide slope, and negative when it
is below the calculated glide slope.
. Required Altitude (ReqAlt) = Estimated altitude loss from current position to target taking into accout
current MC, bugs, ballast and wind settings
. Task arrival altitude (tArr) = Altitude required to complete the task
Final glide navboxes:
. Flown L/D (Cur.L/D) = Current glide ratio estimated over the last two minutes of flight
. Required L/D (Req. L/D) = Required glide ratio to reach the selected waypoint
. Thermal L/D (Ther. L/D) = Glide ration since last circling phase finished
. Arrival altitude (Arrival) = Expected Arrival altitude at the selected waypoint calculated by taking the
distance, MC, wind, glider polar, bugs and ballast into account. It is
. Required Altitude (ReqAlt) = Estimated altitude loss from current position to target taking into accout
current MC, bugs, ballast and wind settings
. Required Mc (Req.Mc) = MacCready ring setting which will allow you to final glide exactly to the
Target. It shows Arrival Altitude when Arrival altitude for MC=0 is less than zero
. Task required L/D (tL/D) = Required glide ration to complete the task
Speed navboxes:
. Speed over ground (GS) = Groundspeed. This value is negative if the difference between heading
and track is more than 90 degrees
. True airspeed (TAS) = Groundspeed corrected with indicated wind
. Speed to Fly (STF) = Speed to fly according to MC theory which takes MC setting and sink into
account.
. Task speed (Tsk.Sp.) = Speed on task until the present position
. Task required speed (tReq.Sp) = Average speed you need to achieve to complete the task inside the
Task time
. Speed Last hour (60'.Sp) = Average speed achieved in the last 60 minutes
Vario navboxes:
. Thermal vario (VarT) = average vario since beginning of circling
. Average vertical speed (VarA) = average vario for the last 20s
. Vertical speed (Vario) = current vario reading
© 2003 - 2013 ... Naviter d.o.o.
86
SeeYou Mobile
. Netto vertical speed (Netto) = Variometer reading corrected for the sink of the glider according to
the selected polar
Wind navboxes:
. Current wind (Wind) = Current wind measurment
. Current wind component (cWind) = Wind component in current direction of the flight. Positive values
are tailwind, negative values are headwind. Two numbers are displayed. First number is difference
between groundspeed and true airspeed. The second one is wind component derived from the calculated
wind at current altitude. When the two are significantly different you will know not to rely on the
calculated wind strength
Airspace navboxes:
. Nearest airspace - Horizontally (Near AS.H) = Distance to horizontally nearest airspace where you
are not "inside". The caption of this navbox will show airspace name. Tapping on this navbox will
temporarily arm this airspace so you can turn it off if you wish.
. Nearest airspace - Altitude (Near AS.V) = Relative altitude to the horizontally nearest airspace. It
can be either negative if you are below the lower limit of the airspace, positive if you are above the
upper limit of the airspace or "Inside" if your altitude is in between the lower and the upper limit of the
airspace in question.
. Nearest airspace - Vertically (Near AS.V) = Relative altitude to the airspace at the location of the
glider. It can be either negative if you are below an airspace , positive if you are above an airspace or
"Inside" if your altitude is in between the lower and the upper limit of the airspace in question.
Task navboxes:
. Task remaining distance (tDis) = Distance remaining on the task
. Task arrival altitude (tArr) = Altitude required to complete the task
. Task required L/D (tL/D) = Required glide ration to complete the task
. Task arrival time (tETA) = Estimated time of arrival to the finish
. Task estimated time (tETE) = Estimated time to go on task
. Task remaining time (tRemain) = Remaining time until task time elapses
. Task Delta time (tDelta) = Task established time - Task remaining time
. Task speed (Tsk.Sp.) = Speed on task until the present position
. Task required speed (tReq.Sp) = Average speed you need to achieve to complete the task inside the
Task time
Statistics navboxes:
. Thermal vario (VarT) = average vario since beginning of circling
. Optimized distance (Opt) = Optimization over a preselected number of waypoints (default is OLC
optimization)
. Closed optimized distance (cOpt) = Optimization of flight if you return back to the point of takeoff
. FAI Triangle distance (FAI) = Triangle optimization. It displays "FAI Tri" when proportions are correct
. Speed Last hour (60'.Sp) = Average speed achieved in the last 60 minutes
Action buttons:
There are a few "dummy" navboxes which are used on devices with few hardware buttons. Due to the
lack of hardware buttons you may place "software" buttons in the shape of a Navbox on your screen. The
following "buttons" are supported:
. MC increase will increase the MacCready value by 0.1 m/s or 0.2 kts
. MC decrease will decrease the MacCready value by 0.1 m/s or 0.2 kts
. Volume increase will increase the Volume of the device
. Volume decrease will decrease the Volume of the device
. Map 1 page will switch view to Map 1 36
. Map 2 page will switch view to Map 2 36
© 2003 - 2013 ... Naviter d.o.o.
Settings
87
. Statistics page will switch view to Statistics page 49
. Info page will switch view to Info page 47
. Engine running will reset optimization when "engine" is stopped. Tap on the navbox changes the state
of the "engine"
When Select multiple is checked you can tap on a single navbox to select it and keep selected the ones
that were already selected. To select a number of navboxes at once, tap, hold and move the stylus.
Select All quickly selects all navboxes, so you can use the Edit button.
Edit... button allows you to change common values of the navboxes. Select single or several navboxes by
dragging the stylus over the navbox names. Then press Edit to select the Number of lines you wish
them to have and whether or not you want the selected navboxes to be Transparent.
You can assign an Action to each of the Navboxes. Action is performed when you tap on a specific
navbox. By default, only Team navbox has an action assigned to it. Tapping on the Team navbox will
open the Team 73 dialog where you can enter your teammate's position code.
Auto Arrange check box will rearrange new navboxes so, that they stack at the bottom of the screen.
Show navboxes check box will hide navboxes if not checked.
7.7.1
Edit
Number of lines determines how many lines a navbox will have on the screen. A navbox consists of
three lines:
. Title line (Line 1) which is black by default and has white font
. Data line (Line 2) with white or transparent background and black text by default
. Units line (Line 3) with units or other sub data to the main data line.
When Number of lines is one, only the Data line (Line 2) will be displayed.
When you select two Title and Data lines will be displayed (Line 1 and Line 2).
When you select three all three lines will be displayed.
© 2003 - 2013 ... Naviter d.o.o.
88
SeeYou Mobile
Colors panel accounts controls the looks of the Navboxes. You can change the colors for
. Background
. Frame
. Title line
. Data line
. Units line
Note that you can change the Navbox colors separately for each Navbox. Select a group of navboxes in
Menu > Next > Navboxes, then press Edit to edit the Color and Number of lines settings for several
navboxes at once.
Allow drag check box if checked will allow you to place any Navbox anywhere on the screen. To move
it, Tap on the Navbox in question, then move it to a new spot. Note that you can move the North Arrow,
Glider symbol, Wind indicator and Glideslope indicator in the same way.
If the checkbox for Transparent is selected, the Data and Units line will be transparent.
7.8
Symbols
You can choose the preferences for these symbols:
. Aircraft
. Flarm aircraft
. ADS-B aircraft
. Wind
. Orientation
. Final glide
. Scale
. Task button
. Speed to Fly
. Flarm Radar
Visible property shows or hides a specific symbol.
© 2003 - 2013 ... Naviter d.o.o.
Settings
89
Transparent property makes the symbol outlined if checked.
Allow drag option lets you choose whether or not the symbol can be moved around the screen.
Reset position button will bring the selected button back to its default position on the screen.
The Size slider selects the size of each symbol.
Type combo box lets you choose from several options for a particular symbol.
7.9
Warnings
There is three types of warnings in SeeYou Mobile
1. Airspace warnings
2. Altitude warnings
3. Flarm warnings
Airspace Warning is activated by two triggers. First warning is when the projected point of the flight is
inside a sector. Sector is outlined bold red, so you can clearly identify it on the screen. The position of
the glider is projected for the value in secons ahead of the current position. This value is setup in Time
[s] setting.
Second Airspace warning appears when you fly closer than the preselected Distance from the Airspace
or when your altitude is less than Alt.res different from the airspace boundaries. A continous sound
warning and whole-screen warning appears.
Altitude warning is a general warning, useful for example when there is a maximum altitude set for a
competition day or 18.000ft for the USA. When you come close to the airspace, you get a beep and the
red banner much like the airspace warning.
Flarm warning is special in that it reads the information from the Flarm device and then uses voice
imitation in order to pass this information to the pilot.
© 2003 - 2013 ... Naviter d.o.o.
90
7.10
SeeYou Mobile
Thermal
Thermal assistant continuously analyzes the thermal when you are circling. You can decide when you
would like to be warned about potential better lift in one part of the circle.
Vario variance is the difference between squares of deviations and the mean vario value. The bigger the
difference, the more possible it is that if you move your circle in the direction of the strongest lift that the
average climb will increase.
In the Menu > Settings > Thermal you can determine at which vario variance you would like the visual
Thermal Assistant and Audio thermal assistant will appear. For the audio you can also select how much
before the maximum the thermal assistance will whistle.
You may choose between Bubbles and Ring representation of the graph which shos the best part of the
lift. Bubbles is the default setting.
If you would like to show the navboxes which are currently displaying, check the box at Show current
map navboxes.
See also:
Getting started - Thermal Assistant 30
Menu 51 (with a shortcut to show the Thermal Assistant regardless of the variables)
© 2003 - 2013 ... Naviter d.o.o.
Settings
7.11
91
Polar
The Polar dialog lets you enter your glider polar data into SeeYou Mobile. These data is essential for
performing the final glide calculations.
You can access a list of pre-generated polars by clicking on the "List..." button.
Glider field lets you enter a name for the polar.
Min. load sets up the minimum wing loading of the glider while Stall speed tells SeeYou Mobile about
the assumed stall speed of the glider.
a, b and c are parameters of the quadratic equation which is a mathematical approximation of the
glider's actual performance.
By checking the User polars only checkbox, only polars entered by the user will be displayed in the
Saved Polars combo box.
If you enter Min weight, Max weight, Empty weight and Pilot weigths for the glider you will be able
to enter water in kilograms (or liters).
Info panel gives you a basic information about what has been setup.
© 2003 - 2013 ... Naviter d.o.o.
92
7.12
SeeYou Mobile
Units
Setup the units you are used to in the Units dialog. You can choose the units for
Distance - km, nm, ml
Altitude - m, ft
Speed - m/s, km/h, kts, mph
Vertical speed - m/s, kts, fpm
XC Speed (cross country speed or average speed) - m/s, km/h, kts, mph
Pressure - mbar, hPa, mmHG, inHg
Load (wing loading) - kg/m2, lb/ft2
Latitude/Longitude - DDMMSS, DD.MMmmm, DD.dd
Set to metric sets up km, m, km/h, m/s, km/h, mbar, kg/m2 and DDMMSS
Set to imperial sets up ml, ft, mph, kts, mph, inHg, lb/ft2, DDMMSS
© 2003 - 2013 ... Naviter d.o.o.
Settings
7.13
93
Fonts
The fonts dialog allows you to change preferences of the fonts in SeeYou Mobile.
Choose one Item, then change Font, Size, Color, Bold, Underline and Italic preferences. See an
example in the Sample panel at the bottom of the dialog.
7.14
Input
The input dialog lets you choose from three different input methods for displaying a flight in SeeYou
Mobile.
© 2003 - 2013 ... Naviter d.o.o.
94
SeeYou Mobile
Serial
is what you will want to use in the air. In normal circumstances all you need to do is attach a GPS to the
serial port of your PDA and enable the Serial radio button and the communication will run automatically.
Make sure that your GPS is sending the correct NMEA data.
The header line of the Map view
input mode.
36
will display 3D/X, 2D/X or BAD in the top left corner when in Serial
The Port Settings... button will let you choose preferences for the GPS
95
.
NODATA reset after will close and reopen the COM port if NODATA is received for the selected amount
of seconds.
Ignore Checksum will not control the checksum at the end of NMEA sentences. Do not turn this option
on unless you have a good reason to do so.
Simulator
In this mode a glider is controlled by dragging a line out of the glider thus telling it in which direction to
move and how fast. You can specify a start Latitude and Longitude through the edit boxes if you wish.
File
This mode takes an IGC file and animates an old flight. This is the most perfect way to test the
application. You will be able to rely on own feelings from the actual flight and observe what SeeYou
Mobile would have been telling you if you had it with you in the air at that time. Use the "..." button to
select a flight you wish to animate and the Rate spin do select how fast the animation should run.
A particularly useful way to replay a flight is if you managed to save a NMEA log of your flight. In the
NMEA log all of the messages that were sent to the device may be reproduced on screen, including other
Flarm data and its warnings. To replay a saved NMEA log you need to create a "TMP" folder in the root
of your Pocket PC memory, save the NMEA log as "nmeain.log" and select "File" as your input in Menu >
Settings > input.
© 2003 - 2013 ... Naviter d.o.o.
Settings
95
7.14.1 Port Settings
This dialog sets up preferences for the GPS input like COM port (or GPD software port), COM
speed, Parity, Bits and stop bit.
DTR = Data Terminal Ready. Some GPS devices require this option to be checked to deliver NMEA data
RTS = Request To Send. This option should normally be unchecked
Most GPS devices will be happy with Port Settings "COM 1, 4800bps Speed, no Parity, 8 bits and 1 stop
bit", however there is some (like the Navman Sleeve GPS, Bluetooth GPS devices and CF card GPS
devices) that require different COM port settings. Please refer to the documentation of the GPS in
question or our Support pages to get the correct help.
7.15
Commands
You can fully customize which button takes over which action through the Commands dialog.
There are three groups of buttons available through SeeYou Mobile. Note that each PDA may have
different buttons, located at different places and some will not have all of the buttons at all. This is all no
problem for SeeYou Mobile. It will detect which buttons your PDA has and will operate accordingly.
. 5-way navigation button (arrows and enter)
. Buttons on the casing of the PDA
. 5 software buttons in the Command bar of the SeeYou Mobile window.
. Keyboard letters
This way you are sure to be able to setup your PDA to match your preferences. Select a button, then
choose an action for this button through the Edit button. You may also assign <no action> or <system
default> action to the button.
Add button lets you add actions for keyboard keys. This is particularly useful for devices with built in
keyboard like HP iPaq 4350.
© 2003 - 2013 ... Naviter d.o.o.
96
7.16
SeeYou Mobile
Menu
You can fully control the content and order of the buttons in the menu. Use the Up/Down and Edit/
Insert/Delete buttons to change the main menu.
7.17
Files
Setup the default file locations for SeeYou Mobile through this dialog. To read about how to transfer your
terrain, waypoint and airspace files to SeeYou Mobile, please read the chapter Copying files to SeeYou
Mobile 9 .
© 2003 - 2013 ... Naviter d.o.o.
Settings
97
Note that any of the files can be stored either in Pocket PC internal memory or Storage Card. While
internal memory is slightly faster, Storage card is safer when the battery drains out. We recommend
storing all files on removable flash media such as SD, CF and similar types of cards. It is possible to
change files during runtime.
Selecting multiple waypoint and airspace files.
It is possible to select more than one waypoint and more than one airspace file in SeeYou Mobile.
Waypoint files only: If you decide to use more than one waypoint file, then one file must be selected as
Active. Tasks will be read and written to this file and no other files. Note that many waypoint file types
are supported, but the Active file must be in SeeYou Waypoint file format CUP. Example of a waypoint file
selection dialog where four out of six matching files are selected and the files are in three different file
formats:
© 2003 - 2013 ... Naviter d.o.o.
98
SeeYou Mobile
Automatic search for files. When you open the "Select files dialog" such as in the screenshot above,
the whole file system of your device is searched for corresponding files. If you are looking for terrain
files, all CIT files from your PDA will be listed etc.
7.18
Log
SeeYou Mobile does also log a flight and produces an IGC file. Note that this IGC file is not secure by
GFAC (IGC) standards and therefore can't be used for claiming badges and records. It can however be
analyzed in SeeYou or similar software after the flight.
This dialog lets you enter the Header information for the flights recorded with SeeYou Mobile.
Information on Copilot, Registration, Competition ID and Class is collected here. Note that SeeYou
Mobile for PDA and PNA has pilot name embedded into the registration key and can therefore not be
changed through this page. Interval spin box lets you select the interval between consecutive fixes that
are recorded while Enable logging check box turns logging on and off. The location of the stored IGC
file is determined through the Settings > Files 96 dialog.
The Start/Finish logging button enables you to manually start or finish the recording of the flight
regardless of the current flight parameters which try to determine takeoff and landing automatically.
Launch Type determines how soaring begin is calculated. At the setting "Foot launch" Soaring begin is
equal to takeoff. At other settings it is not.
© 2003 - 2013 ... Naviter d.o.o.
Settings
7.19
99
User Interface (UI)
Screen orientation may not be supported on all devices. If certain or all directions are greyed out then
your devices does not support rotating the screen in that particular direction. The directions given are
relative to the default orientation:
0 = default orientation (Portrait on PDA, landscape on PNA)
90 = 90 degrees clock-wise from the default orientation
180 = upside down from the portrait orientation
270 = 90 degrees anti-clockwise from the default orientation
Dialog timeout sets up how long a dialog will wait for you to press something before it quits and
returns back to navigation. Dialogs subjected to this are Zoom, Flight Properties, Wind, Map orientation
and similar. Note that the Settings dialog is not a subject to disappearing as we consider you know what
you are doing when you are going through the Settings.
Drag limit is an area of pixels within which the control will not move even if you move the stylus or your
finger. This is required for using the display with fingers because it is difficult to keep still in a shaky
environment of the glider.
Snap pix lets you choose the margin for how far away a point from the database is selected
automatically in Task > Map mode.
Show command bar will show the command bar with Tool buttons at the bottom of the Map view
Show task bar will show the task bar at the top of the Map view
36
36
.
.
Tap & Hold activation will force you to tap and hold a symbol on the Map page to bring up a dialog like
the Wind 55 , Map direction 52 , Flight properties 56 .
© 2003 - 2013 ... Naviter d.o.o.
100
SeeYou Mobile
SeeYou Mobile speaks several Languages. You may select your language through the Language combo
box. Managing installed language files is possible through the Manage... 100 dialog. Note that you need
to have installed the Multilingual version of SeeYou to have other languages than English available.
Regional Settings drop down list allows you to select how you would like the date and time field to be
formatted. For example if you wish to use SeeYou Mobile in English but still want your local date and
time format choose your locale through this drop down list.
7.19.1 Manage languages
In this dialog you can see which language files are installed on your Pocket PC and what versions they
carry. A language file version must be the same as the installed application version or else, the
translations won't work. You will need to download the Multilingual version each time you upgrade
SeeYou Mobile to be able to use SeeYou Mobile in a language other than English.
The Delete button lets you delete any unwanted language files to save storage space on the device.
See also
. Units 92
© 2003 - 2013 ... Naviter d.o.o.
Settings
7.20
101
Flarm
Customizing the Flarm Radar 31 can be done through Menu > Settings > Flarm. This page only appears
when Flarm messages are received in the incoming NMEA stream.
© 2003 - 2013 ... Naviter d.o.o.
102
SeeYou Mobile
Show Radar: Through this setting you may setup a Zoom level below which the Flarm radar is visible.
Default value is 10km which is also a suggested value. The reach of the Flarm Radar is about 3km and it
depends largely on the placing of the Flarm antenna in both transmitting and receiving aircrafts. The 3km
radar circle at Zooms above 10km becomes small and the screen cluttered, therefore we suggest 10km
as a default for this setting.
Show lost device for [s]: When sygnal from a particular Flarm device is lost, the aircraft remains
blinking on screen for this duration (default 120 seconds). After that the aircraft symbol is removed from
screen. If you were previously navigating towards the aircraft in question, the Target remains blank after
this period.
Show Labels: defines whether or not the labels with Friendly name (if entered), altitude and average
vario are visible.
Transparent Labels: defines whether or not the labels are transparent. When the labels are not
transparent (which is the default setting) then there is a white background behind the labels for each
Flarm unit. The labels may overlap. In that case the label for the device that you are navigating towards
(the one that is selected as Goto) is drawn on top of all labels. If you are not navigating towards a
particular Flarm device, then the closest label is drawn on top of the other ones.
Track lenght [s]: This is the duration for which you may see each Flarm's track in the Map view.
Show tracks: defines whether or not the tracks of the Flarm devices are visible in Map view.
Colors are designed to present three values. The color for aircrafts more than 100 meters below your
current altitude is defined by the first Below me selection box. The color for aircrafts that are less than
100 meters below or above your current altitude is defined by the Inside 100m (i.e. roughly 300ft)
selection box. The color for aircrafts more than 100 meters above your current altitude is defined by the
first Above me selection box. Default colors are black for "Below me" and "Above me" and red for
"Inside 100m".
© 2003 - 2013 ... Naviter d.o.o.
Settings
7.21
103
Miscellaneous (Misc)
The Miscellaneous dialog takes care of all the rest of the options, not covered in other parts of the
application.
If all goes wrong, you can Restore all settings to default by checking this check box and restarting
the application.
Register on Today list will place a shortcut on your main page of the Pocket PC.
If the Power management checkbox is enabled then the device's power saving options are overridden.
For example. If your device is setup to turn off if not used for 2 minutes, then this option can override
this option while SeeYou Mobile detects flying mode. Please note that if not used carefully turning this
feature on can deflate your battery.
Add profile... button allows you to add new profiles to SeeYou Mobile. One application for several
profiles is when you fly different club gliders and need different setups for them (different loggers,
aircraft make and model etc.) Second reason to have more profiles is when several people use the same
Pocket PC in one glider. When there is more than one profile available, you get to choose it when startin
the application.
Reset "do not show again". There is several dialogs with "do not show again" labels at the bottom. If
you would like to see them all again, press this button.
Copy map settings... will replace settings of one map with settings from the other map. Please read
the message in the dialog carefully, so you don't accidentally replace the wrong map settings.
7.22
Hardware
Some GPS or Variometer devices send out proprietary NMEA data. In order to work with these, you will
need to tell SeeYou Mobile which GPS is connected through this dialog.
© 2003 - 2013 ... Naviter d.o.o.
104
SeeYou Mobile
You should tell SeeYou Mobile which GPS is at the other end of the Serial cable for some devices in order
to be able to communicate with it. You can do that with the Device drop down list. Note that some
devices are recognized automatically. A dialog will pop up in that case to let you know that a device was
recognized.
MacCready, Ballast, Bugs settings may be sent or received to some devices. Uncheck Receive from
device if you don't want the device to change these settings in SeeYou Mobile. Uncheck Send to device
if you don't want to change settings on the device through SeeYou Mobile. Play sound alarms on
device lets you enable playing sound alarms on the device which is connected to SeeYou Mobile.
Current label tells you which device was recognized. A caption Generic GPS means that the device was
not recognized as one of the special devices.
Port settings... opens up the COM Options
95
dialog.
Terminal... 104 button opens up a dialog where NMEA input can be monitored.
7.22.1 Terminal
This dialog allows you to see what data SeeYou Mobile is receiving through the COM port. It may be very
useful for debugging any problems related to GPS input.
The upper edit box allows you to enter commands and sending them with the Send... button.
Port settings... opens up the COM Options
95
dialog.
The largest section of the screen shows NMEA input when GPS is connected.
Pause button pauses receiving of NMEA data.
Stamp will add a timestamp to each NMEA sentence which makes it easier to debug.
Save... button will save the log which you would perhaps like to send to [email protected] if there is
© 2003 - 2013 ... Naviter d.o.o.
Settings
105
a problem you are debugging.
7.23
V7 / LX1600
This dialog only appears when SeeYou Mobile is connected to the LX 1600 variometer. For more
information on LX 1600, visit www.lxnavigation.si
LX 1600 is a modern vario-speed command system. It is especially designed to operate with PDA
devices. SeeYou mobile supports all features of LX 1600. You can use SeeYou Mobile to change the
volume and MacCready settings through the Flight Properties 56 dialog. You may also use the
Commands 95 dialog to set MacCready increase/decrease and Volume increase/decrease actions to the
available buttons.
There are four panels available on two LX 1600 settings dialogs. Panels are for setting up the
Variometer, Speed to fly, Audio and LCD Indicator settings.
Vario panel allows you to control the properties of the variometer needle.
. Filter affects sensitivity of the vario. The higher the number, the slower vario needle and audio sygnal
respond.
. Range selects max and min values for the vario needle. They can be 5 or 10m/s, 10 or 20kts, 1000 or
2000fpm.
. Avg selects the averaging interval for the integrator.
. TE Filter selects the filter for Total Energy compensation. The higher the number, the longer it takes for
the vario to show the change in Total energy altitude of the glider.
. TE Level allows you to compensate for inaccuracies in static pressure/TE tubes. See the LX 1600
manual (chapter 3.2 - Pneumatic Connection) about how to connect the tubes in order to have electronic
compensation (it is different than the tubing when connected to TE pressure compensation).
. Smart filter is a dynamic filter and controls the rate at which the vario indication moves. Higher
number is slower, more filtered. (see LX1600 documentation for more on this)
. Autozero is used when you notice that the needle is not exactly zero on the ground when nothing is
moving and the wind is calm. Press autozero in a calm environment to re-calibrate vario parameters to
zero.
© 2003 - 2013 ... Naviter d.o.o.
106
SeeYou Mobile
Speed to fly panel
. Mode selects when the vario sound changes from vario to speed to fly. When set to External it will
use the information from an external switch which you must have installed somewhere in the cockpit. In
the On circling mode it will change to vario when the glider is circling while it will be in Speed to fly
mode while cruising. Auto speed mode will switch to speed to fly mode when the airspeed becomes
greater than the Spd. value on this same panel.
. Switch style allows you to "invert" the switch operation through the software. Taster option will
change the modes each time the taster is pressed.
. TAB allows you to select how deep the silent are is (this is an area around zero where speed to fly
indication will not beep).
Write settings to eeprom will save your current settings from both pages (LX 1600 and LX1600-2) to
LX 1600, so they are used even if the PDA is not connected to LX 1600, which can happen in case of
power failure of the PDA.
Audio panel is at the second settings page - LX1600(2).
. Syle lets you choose between the following types of variometer sounds:
.. Lin/neg = The sound changes in linear correlation to the vario reading. It is intermittent at negative
vario values.
.. Lin/pos = The sound changes in linear correlation to the vario reading. It is intermittent at positivevario
values. This is the default setting.
.. Linear = The sound changes in linear correlation to the vario reading. It is not intermittent.
.. Dig/neg = The sound changes in discrete steps. It is intermittent at negative vario values.
.. Dig/pos = The sound changes in discrete steps. It is intermittent at positive vario values.
.. Digital = The sound changes in discrete steps. It is not intermittent at any vario values.
. SC Style lets you select between SC pos, SC neg and SC. SC pos beeps at positive values, SC neg
beeps at negative values wile SC gives a continous sound at positive values, so you won't mistaken its
beeps with vario sounds.
. Min.freq. is the sound you will hear when the vario is pegged at -10m/s.
. Zero freq. is the sound you will hear when vario equals zero.
. Max.freq. is the sound you will hear when the vario is pegged at +10m/s
. SC Vol allows you to select between noisy (Vol H) and more silent sound (Vol L) in Speed command
. Test button allows you to see and hear what you have setup. You must be positively connected to LX
1600 in order to test its audio settings.
LCD indicator is found on the second settings page - LX1600(2). It allows you to setup the upper and
lower numbers in the LCD separately for vario and speed command modes.
. Needle lets you setup what the needle on the indicator shows (Vario, Speed Command, Netto vario or
Relative vario)
. Num#1 lets you setup what the bottom number on the display shows (Altitude QNH, Distance to target,
Glide slope difference, Indicated airspeed or Leg speed)
. Num#2 lets you setup what the upper number on the display shows (Average vario, Current time,
Flight time or leg time)
© 2003 - 2013 ... Naviter d.o.o.
Settings
© 2003 - 2013 ... Naviter d.o.o.
107
Part
VIII
Windows Mobile tips and tricks
8
109
Windows Mobile tips and tricks
There are some tricks in using the Windows Mobile and PDAs. Here's some which you will want to use
with SeeYou Mobile.
Using PDA with your fingers
Usually in office conditions, you will be using your PDA with the included stylus. However inside the glider
this is a pain. Stylus is small, PDA is shaking, so taping the screen is pretty inaccurate. The stylus could
get lost really quickly. SeeYou Mobile is therefore designed to be used with fingers rather than the stylus.
Tap
This is similar to mouse left-click in desktop Windows. Press your finger or nail anywhere on the screen
to create a "Tap". This way you can navigate through the menus or tap on the map to get the Goto and
Airspace menu for example.
Tap and Hold
Tap and hold is something similar to the mouse right-click in desktop Windows. There are few uses for a
pop-up menu in SeeYou Mobile, so Tap and Hold is normally used to perform special tasks on the map.
An example is moving the Nav-boxes or accessing the Flight parameters by tapping and holding the
Glideslope indicator. Similar use is assigned to tapping and holding the Wind and North indicators.
Using the PDA buttons and 5-way Navigation button
All buttons in SeeYou Mobile are customizable. You can assign any command to any of the buttons which
are manufactured on your PDA through the Commands 95 menu. In addition to the hardware buttons,
the same application is intended for the 5 available buttons on the screen in the Command bar section.
© 2003 - 2013 ... Naviter d.o.o.
110
SeeYou Mobile
Index
-<< Prev and Next >
51
-11 hour
1000m
44
69
-55 minutes
area
9
ARM
2
Arrival
84
Arrival altitude
84
Arrival time
84
Arrow towards the North
36
As.Dis
84
Assigned Area
24, 40, 67
Auto advance
69
Auto Arrange
84
Automatic search
96
automatically suggest
65
Average vario
84
-B40, 44
-AAbout
71
Action
84
Activate
40
Active
96
Active Sync
9
Add
53
Add Waypoint
53
Agl
84
Airspace
9, 37, 40, 44, 79, 89
Airspace warning
21, 24, 36, 44
Airspace warning banner
44
alarm
44
Allow drag
87, 88
Alphabetical
61
Alt
84
Alt. Colors
77
Altitude
78, 89
Altitude Colors
78
Altitude QNH
84
Altitude reserve
56
Always
40
Angle1
67, 83
Angle12
67, 83
Angle2
67, 83
Animation
44
Animation speed
36
Apply
55
BAD
41, 45
badge
21
banner
44
Bearing to target
84
beep
44
below start
69
Bits
95
Blue
43
BLUETOOTH
11
Brg
84
Browse
9
Bugs
56
button
95
by file
61
by waypoint type
61
-CCambridge
11
center
30
Checksum
93
Circling North
52
CIT 43, 77
collision
31
Color
43, 81, 82
Colorize
80
Colors
87, 101
COM
104
COM port
95
COM speed
95
Combination
55
© 2003 - 2013 ... Naviter d.o.o.
Index
Command
45
command bar
7, 36, 99
Commands
95
Compaq Aero
2
Connecting
11
connection error
9
Copy
103
Copying
9
Cur.L/D
84
Current wind
84
Current wind component
84
Cursor sort
80
cWind
84
-Ddeclaration
70
Default
13
Defaults
77, 80
delete
59, 60, 65, 66
Delete point
65
desktop PC
10
Destination folder
9
Details
58, 59
Direction
67, 83
Dis
84
DisInv 84
dismiss
44
Display
52
Display options
7, 28, 52
Distance to airspace
84
Distance to target
84
drag
52
Drag limit
99
DTR
95
-EEast Up
52
Edit
59, 67
Edit Point
65, 67
Edit Waypoint
60
Elev 67
Elevation
67
Enter the task
21, 24
Entering the task
65
Esc
52
© 2003 - 2013 ... Naviter d.o.o.
establish
70
Established time
ETA
84
ETE
56, 84
Exit
72
84
-FFAI 84
FAI Area
82
FAI Triangle
28
FAI Triangle Assistant
28
FAI Triangle distance
84
File
10, 45, 93
File replay
10
Files
96
Fill
79, 81, 82
filter
58, 61
Final glide
7, 21, 24
finger
109
Finish
28, 69
first time
7
FL
84
Flarm
11, 31, 37, 39, 89, 101
Flarm Radar
31
flash
41
FLASH CARD
11
flashing
41
Flight
49, 81
Flight level
84
Flight properties
7
flight recorder
70
Flight statistics
49
Flight trace
36, 43
Flown L/D
84
Flying
21
Flying the task
24
fonts
93
Free FAI 28
friendly name
31
-GGarmin
11
Getting Started
6, 30
glide slope
42
Glider
41
111
112
SeeYou Mobile
Glider position
36
Glideslope indicator
36
Gnd
84
Goal Up
52
goto
7, 31, 39, 53, 58
goto dialog
21, 24, 58
GPD
95
GPS
41, 84, 103
GPS Source
11
GPS Status
84
green
58
Ground elevation
84
Groundspeed difference
55
GS
84
-M-
-HHardware
103
header
7, 45
Header line
36
Heading Up
52
Height above ground level
Hide
79
-IIGC file
98
imperial
92
inactive
44
Information
47
input
10, 93
insert
65, 66
Install
6
Invert
65
iPAQ
2
-LL/D
21
LabelOne
80
LabelTwo
80
Lake
9
Landable
58, 61
languages
99, 100
last 60 minutes
49
layers
55
Leg Sp.
84
Leg speed
84
Length
81
lift
30
Line only
67, 83
Linked
56
list
65
List view
64
Load
56
Load task
65, 68
Local time
84
Log
98
LX 1600
105
LX Navigation
11
84
MacCready
56, 69
MagBrg
84
Magnetic bearing to target
84
Magnetic Track over ground
84
MagTrk
84
map
7, 36, 52, 65, 66, 77
Map 1
36
Map 2
36
Map orientation
7, 41, 52
Map pages
21, 24
Map view
64, 77
MAWT 52
Max number
80
MC
43, 69
Memory
2
menu
7, 45, 51, 96
methods
55
metric
92
MIPS
2
Misc
103
Miscellaneous
103
Mobile Wizard
9
move
65, 66
multi
13
multiple
96
multiple files
61
-NNavbox
44, 84
Navboxes
7, 21, 24, 36, 84
© 2003 - 2013 ... Naviter d.o.o.
Index
navigate
21
Navigation
7
Navigation button
109
Navman
11
Near Airport
38, 58
Netto
84
Netto vertical speed
84
Next
52
NMEA
10, 11, 39, 103
NMEA log
10
nmeain.log
10
NODATA
45, 93
North
7, 41
North arrow
7
North Up
52
-OObservation zone
83
Operating system
2
Opt
82, 84
Optimization
7, 82
Optimized distance
84
Optimized track
81
-PPan
41, 52
Pan mode
52
Parity
95
Pause
44, 104
PDA buttons
109
play
44
Pocket PC
2
Pocket PC 2002
2
Pocket PC 2003
2
Polar
91
Port settings
11, 93, 95, 104
position
41, 47
Position drift
55
Prev 52
Printtechnik
11
profile
13, 103
Profiles
13
proximity
44
© 2003 - 2013 ... Naviter d.o.o.
-QQNH
56
quit
72
-Rracing
21
Radar
31, 101
Radial
84
Radius1
67, 83
Radius2
67, 83
Railroad
9
recently used
58
record
21
rectangle
9
Red
43
registration
71
registration key
3, 71
Relative coloring
78
report
47
Req. L/D
84
Req.Mc
84
ReqAlt
84
Required Altitude
84
Required L/D
84
Required Mc
84
reserve
56
Reset
103
Restore
103
River
9
Road
9
Rotate
28, 52, 82
RTS
95
-SSave
65
Save As
78
Scheme
78
SDI Posigraph
11
Second Edition
2
sector
83
SeeYou
9
SeeYou Mobile
2
SeeYou Mobile Simulator
10
113
114
SeeYou Mobile
Send
104
send files
9
Serial
93
settings
9, 52, 77, 103
several files
61
Show
77, 79, 80, 84
Show all
40
Show area
82
Show current track vector
81
Show track
81
Show vario
81
SIM
45
Simulator
10, 93
Soaring time
56
sort
38, 39
South Up
52
Speed over ground
84
Speed to Fly
42, 84
Speed to Fly indicator
36
Start the task
21, 24
statistics
21, 24, 49
Steering course
84
STF
84
stop
95
Storage Card
6, 96
Strong ARM
2
symbol
41
Symbols
7, 88
-TTake-off altitude
56
Tap
7, 38, 41, 49, 66, 109
Tap & Hold
99
Tap and Hold
41, 109
Target
81, 84
Target name
84
tArr
84
TAS
84
Task
7, 37, 40, 64, 70
Task arrival altitude
84
Task arrival time
84
task bar
45, 99
Task declaration
70
Task Delta time
84
Task established time
84
Task options
69
Task remaining distance
84
Task remaining time
84
Task required L/D
84
Task required speed
84
Task speed
84
Task statistics
49
Task time
69
tasks
9, 21
tDelta
84
tDis
84
Team
73, 84
Team position code
84
Terminal
103, 104
Terrain
9, 43, 77
Terrain collision
36, 43
Terrain elevations
9
tETA
84
tETE
84
Thermal
30, 90
Thermal assistant
30, 90
Thermal vario
84
Thermals
49
Time
84
tL/D
84
To
84
Today
40, 44, 103
Today screen
3, 7
TomTom
11
topographic
43
Town
9
Track
81
Track over ground
84
Track Up
52
transfer
9, 70
Transparent
84, 87, 88
tRemain
84
tReq.Sp
84
Trk
84
True airspeed
84
Tsk.Sp.
84
-UUI 99
Uninstall
6
units
92
Upgrades
71
Upload
70
Upload Task
70
© 2003 - 2013 ... Naviter d.o.o.
Index
Upload Task declaration
70
-VVarA
84
Vario
84
Variometer
103
VarT 84
Vector
43
Vector map
36
VGA
2
Visible
52, 88
visible symbols
80
Volkslogger
11
Volume
56
-Wwarning
44
Warnings
89
Waypoint
38, 53
waypoint files
96
Waypoint filter
61
Waypoints
9, 21, 37, 38, 80
West Up
52
Width
81
Wind
7, 42, 55, 84
Wind vector
36, 42
Windows CE 3.0
2
Windows Mobile 2003
2
Windows Mobile 5.0
2
Windows Mobile 6.0
2
Wing loading
56
Wpts
80
-XX-Scale ARM
2
-Yyellow
43, 58
-ZZoom
7, 54, 66
© 2003 - 2013 ... Naviter d.o.o.
115
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement