EasyMP Multi PC Projection Operation
Guide
Contents
2
About EasyMP Multi PC Projection
Operations During a Meeting
Meeting Styles Proposed by EasyMP Multi PC Projection . . . . . . . . 5
Project Screens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Holding Meetings Using Multiple Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Holding Remote Meetings Over a Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Using the Projection Control Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Changing the Number of Projected Screens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Changing the Presenter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Outputting Audio from the Projector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Installing the Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Software Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Installing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Ending the Meeting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Operation Summary
Holding Frequent Meetings with Ease
Operating Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Saving Projector Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Preparations Before Starting a Meeting
Preparing to Connect. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Preparing Your Projector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Preparing Your Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Connecting to the Projectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Starting EasyMP Multi PC Projection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Using the Search Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Searching for and Connecting to the Projectors . . . . . . . . . . . . . . . . . . . . . . . . . 18
Automatic search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Manual search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Profile search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Connecting to Multiple Projectors (Mirroring) . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Connecting to Projectors on a Different Network . . . . . . . . . . . . . . . . . . . . . . . . 21
Creating a Shortcut. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Registering a Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Sharing a Profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Exporting the profile you want to share. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Importing the shared profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Troubleshooting
Limitations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Supported Resolutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Display Color. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Number of Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Other Limitations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
When Using Windows 8/Windows 7/Windows Vista . . . . . . . . . . . . . . . . . . . . . 33
Limitations when projecting from Windows Photo Gallery or
Windows Live Photo Gallery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
3
Limitations in Windows Aero (Windows 7/Windows Vista). . . . . . . . . . . . . 33
Other Limitations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Appendix
Solving Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Set Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Cannot connect to the projector you want to use. . . . . . . . . . . . . . . . . . . . . . . . 34
Cannot connect the projector and the computer via wireless LAN . . . . . 34
Cannot connect the projector and the computer via wired LAN . . . . . . . 35
Cannot connect the projector and the computer via the network. . . . . . 35
Cannot select the projector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
The Screen is not Projected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
The movie image and audio are not displayed, the image is slow to
appear, or either the video or audio stop when projecting using
EasyMP Multi PC Projection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
No audio from the projector when connecting with EasyMP
Multi PC Projection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
When a connection is made using EasyMP Multi PC Projection, a
PowerPoint Slide Show cannot be started. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
When a connection has been made using EasyMP Multi PC Projection,
the screen will not be refreshed when using an Office application.. . . . . 38
User Settings Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
General Settings Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Adjust Performance Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Audio Output Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Error Message List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Error Messages when Starting up EasyMP Multi PC Projection. . . . . . . . . . . . 39
Error Messages when Searching for and Selecting Projectors. . . . . . . . . . . . . 40
Error Messages when Projecting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Error Message when Operating a Profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Uninstalling the Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Uninstalling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Copyright Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Regarding the use of Names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Regarding Screen Shots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
4
About EasyMP Multi PC Projection
This chapter introduces the meeting styles you can use with EasyMP Multi PC Projection, and explains how to install the software.
Meeting Styles Proposed by EasyMP Multi PC Projection
Meeting Styles Proposed by EasyMP Multi PC Projection
By using EasyMP Multi PC Projection, you can use the projectors to hold
interactive meetings.
You can connect up to 32 computers to one projector via a network. You
can then select up to four of these connected computers and project their
screens.
When connected to the same projector, anyone can change the screen
being projected by simply dragging and dropping one of the connected
user icons into the projection area. Making these changes allows
presenters to clearly express their opinions along with the images.
Share notes in a presentation
You can project the presentation on part of the screen and your notes on
another part of the screen, allowing the meeting participants to fully
grasp the contents.
Holding Meetings Using Multiple Images
s "Project Screens" p.23
Holding Remote Meetings Over a Network
s "Connecting to Projectors on a Different Network" p.21
Project the same screen in different places
Projectors on the network in remote locations can project the same
image. A maximum of four projectors can project the same screen.
Compare data using up to four screens
You can compare and analyze data by simultaneously projecting screens
from multiple computers connected to the network.
Smoothly change presenters using drag and drop
5
Installing the Software
Installing the Software
You can find EasyMP Multi PC Projection on the EPSON Projector
Software for Meeting & Presentation CD-ROM. Install the software on
the computer you are using.
Software Requirements
EasyMP Multi PC Projection runs on computers that meet the following
requirements.
6
Installing the Software
7
*
For Windows
OS
Windows XP*
Professional 32-bit
Home Edition 32-bit
Tablet PC Edition 32-bit
Windows Vista
For Mac OS X
OS
Mac OS X 10.5.1 or later* 32-bit
Enterprise 32-bit
Mac OS X 10.6.x 32/64-bit
Business 32-bit
Mac OS X 10.7.x 32/64-bit
Home Premium 32-bit
Mac OS X 10.8.x 64-bit
CPU
Ultimate 32/64-bit
Enterprise 32/64-bit
Home Premium 32/64-bit
Home Basic 32-bit
Starter 32-bit
Amount of Memory
Hard Disk Space
20MB or more
Display
Resolutions greater than XGA (1024 x 768), or
less than WUXGA (1920 x 1200)
Display color: 16-bit color (display color
approx. 32,000 colors)
Windows 8 Pro 32/64-bit
CPU
Mobile Pentium III 1.2 GHz or faster
256MB or more
Recommended: 512MB or more
Windows 8 32/64-bit
Windows 8 Enterprise
32/64-bit
PowerPC G3 900 MHz or faster
Recommended: Core Duo 1.83 GHz or faster
Professional 32/64-bit
Windows 8
Mac OS X 10.4.x 32-bit
Ultimate 32-bit
Home Basic 32-bit
Windows 7
Except for Windows XP without any service packs installed, and Windows
XP Service Pack 1.
*
Operation is not guaranteed in Mac OS X 10.5.0 because the Firewall
settings are not set correctly when the version is updated.
Recommended: Pentium M 1.6 GHz or faster
Amount of Memory
256MB or more
Installing
Recommended: 512MB or more
Hard Disk Space
20MB or more
Display
Resolutions greater than XGA (1024 x 768), or less
than WUXGA (1920 x 1200)
Display color: 16-bit color (display color approx.
32,000 colors) or more
Make sure you check the following points before starting installation.
• Close all running applications before starting installation.
• When the language selected for the installation varies from that of the
OS being used, the screens may not be displayed correctly.
For Windows
Installing the Software
q
You need administrator authority to install EasyMP Multi PC Projection.
A Turn on your computer.
B Insert the EPSON Projector Software CD-ROM into your
computer.
C The installer starts automatically.
q
If the installer does not start automatically, open the CD-ROM drive from
My Computer (or Computer), and then double-click InstallNavi.
D Follow the on-screen instructions to install.
For Mac OS X
A Turn on your computer.
B Insert the EPSON Projector Software CD-ROM into your
computer.
C Double-click the Install Navi icon in the EPSON window.
D Follow the on-screen instructions to install.
q
You can download the latest version of EasyMP Multi PC Projection from
the following Epson web site. Go to www.epson.com and select your
location.
8
9
Operation Summary
This chapter explains the basic procedures for using EasyMP Multi PC Projection in a meeting.
Operating Procedures
10
Operating Procedures
A Install EasyMP Multi PC Projection.
s p.6
Follow the on-screen instructions to install.
B Start EasyMP Multi PC Projection.
s "Starting EasyMP Multi PC Projection" p.16
For Windows 8
From the Start menu, select EasyMP Multi PC Projection Ver. x.xx.
For Windows 7/Windows Vista/Windows XP
Start - Programs (or All Programs) - EPSON Projector - EasyMP Multi PC Projection
- EasyMP Multi PC Projection Ver. x.xx
For Mac OS X
Applications - EasyMP Multi PC Projection - EasyMP Multi PC Projection
Operating Procedures
11
C Connect to the projectors.
s "Searching for and Connecting to the Projectors" p.18
Select Automatic search to search for the projectors.
Select the projectors you want to connect to, and then click Join.
q
• You can search for the projectors using three different methods; Automatic search, Manual search, and Profile. See the following for more details on each search
method.
s "Using the Search Screen" p.17
• Once you have created a shortcut for the projectors you searched for, you can start EasyMP Multi PC Projection by double-clicking the shortcut.
The projectors saved in the shortcut file is automatically searched for when starting from the shortcut.
s "Creating a Shortcut" p.28
Operating Procedures
12
D Project screens.
s "Using the Projection Control Screen" p.23
On the projection control screen, the projection area is divided into four panels. You can change the number of available panels and change which
computer's screens are projected.
A
D
C
B
The computer's screen for the first user to connect is projected in the top left panel. Users who connect later can project by dragging and dropping
the user's icons into the available (white) panels.
1
Changing the number of projected screens
3
Projecting the computer's screen
: Project one screen at full screen.
: Divide the projected screen in two.
Drag and drop the user's icon to a white panel.
Your icon is always displayed on the left. You
can project your own screen as well as the
screens for other participants.
: Divide the projected screen in four.
2
Operating your screen's status
4
Changing the projection position
: Project the computer's screen as it is.
: Stop projecting.
: Pause the computer's screen currently being displayed. The
projected screen does not change, even if you make changes on the
computer's screen.
Drag and drop the user's icon to change the
projection position.
Operating Procedures
E End the meeting.
s "Ending the Meeting" p.26
Select Leave or End Session from the Tool menu to stop projecting.
When you select Leave or End Session, you are returned to the search screen.
q
Leave
The connection between your computer and the projectors is cut.
End Session
The connection between all computers and projectors participating in the session is cut.
13
14
Preparations Before Starting a Meeting
This chapter explains the settings you need to make before starting a meeting.
Preparing to Connect
Preparing to Connect
Preparing Your Projector
Follow the steps below to put the projector into connection standby
status. When connecting via wired LAN, check that the projector is
connected to the network with a commercially available network cable.
When connecting via wireless LAN, install the wireless LAN unit in the
projector.
A Turn on your projector.
B Make the projector's network settings.
When connecting the computer to the projector via wireless LAN,
connect using the Advanced connection mode. You cannot connect using the Quick connection mode.
See your projector User’s Guide for details on network settings.
C Change the projector's input source to LAN.
The LAN standby screen is displayed.
15
Preparing Your Computer
Follow the steps below to connect the computer to the projectors and
start projecting.
A Install EasyMP Multi PC Projection on the computer.
s "Installing the Software" p.6
B Make the computer's network settings, and connect the
computer to the network.
s Computer's documentation
q
When the computer you are using is already connected to the network, you
do not need to make network settings on the computer.
C Start EasyMP Multi PC Projection.
s "Starting EasyMP Multi PC Projection" p.16
Connecting to the Projectors
Connecting to the Projectors
This section explains how to search for and connect to the projectors on
the network.
Starting EasyMP Multi PC Projection
Start EasyMP Multi PC Projection using one of the following methods.
For Windows 8
From the Start menu, select EasyMP Multi PC Projection Ver.x.xx.
For Windows 7/Windows Vista/Windows XP
A Click Start and select Programs or All Programs.
B Select EPSON Projector, and then EasyMP Multi PC
Projection.
C Click EasyMP Multi PC Projection Ver. x.xx.
EasyMP Multi PC Projection starts, and the search screen is displayed.
For Mac OS X
A Open the Applications folder, and then double-click the
EasyMP Multi PC Projection folder.
B Double-click EasyMP Multi PC Projection.
EasyMP Multi PC Projection starts, and the search screen is displayed.
When starting from a shortcut
When you have created a shortcut, double-click the shortcut file (.pme)
to start EasyMP Multi PC Projection.
16
See the following for more details on creating a shortcut.
s "Creating a Shortcut" p.28
Connecting to the Projectors
17
3
Using the Search Screen
Searches for the projectors on the network by using the projector
information saved previously.
When you start EasyMP Multi PC Projection, the following search screen
is displayed.
s "Profile search" p.20
4
A
B
C
Displays the registered profiles (projector information).
J
s "Profile search" p.20
When you double-click the profile, the projectors registered in the
profile is searched for on the network.
F
s "Set Options" p.43
6
2
Join
Connects to the selected projectors.
7
E
Automatic search
Set options
Displays the Set options screen.
I
H
G
1
Profile list
L
K
5
D
Profile
List of Connected Projectors
Displays information on the projectors selected from the Projector
List. Even if the search mode is changed, the content of the List of
Connected Projectors remains the same.
8
Register
Searches for the projectors on the network to which the computer is
connected.
Registers the projectors from the List of Connected Projectors to a
profile.
s "Automatic search" p.18
s "Registering a Profile" p.28
Manual search
Searches for the projectors on the network by specifying the
projector's IP address or projector name.
s "Manual search" p.19
9
Clear list
Clears information displayed in the Projector List and the List of
Connected Projectors.
Connecting to the Projectors
10
Projector List
18
12
Manual search box
Displays a list of the projectors found on the network. You can then
select projectors to connect.
When using Manual search, enter the projector's IP address or the
projector name.
The search results for each search mode (Automatic search, Manual
search, and Profile) are displayed in separate lists.
Click the Search button to search for the specified projector.
The status of each projector is indicated by an icon.
Standby
Available. You can connect to the
projector.
Busy
Available. Although other computers are
connected to the projector, you can also
connect at the same time.
Mirroring...
Available. You can connect to a group of
multiple projectors projecting the same
image (mirroring).
s "Connecting to Multiple Projectors
(Mirroring)" p.20
Currently in
use by
another
application
Not available. The projector is displaying
the network configuration screen, or the
projector is being used by other projector
software.
Searching
Not available. A Manual search or Profile
search is already being used to search for
the projector.
Not found.
Not available. The specified projector
could not be found using Manual search
or Profile search.
Unsupported Not available. The projector is not
Projectors
compatible with EasyMP Multi PC
Projection.
11
Refresh
Updates information in the Projector List.
Searching for and Connecting to the Projectors
You can search for projectors on the network using one of the following
methods.
Automatic search
A Start EasyMP Multi PC Projection.
s "Starting EasyMP Multi PC Projection" p.16
Connecting to the Projectors
B Click Automatic search.
19
Manual search
A Start EasyMP Multi PC Projection.
s "Starting EasyMP Multi PC Projection" p.16
B Click Manual search.
C Enter the IP address or the projector name for the projector
you want to connect to, and then click Search.
The EasyMP Multi PC Projection searches for projectors on the
network.
When you click Refresh, the latest information is displayed.
C Select the projectors you want to connect to from the list
displayed, and then click Join.
The projection control screen is displayed.
s "Using the Projection Control Screen" p.23
q
When a projector keyword has been set, the keyword entry screen is
displayed when you connect to the projector. Enter the keyword, and then
click OK.
The projector keyword is displayed on the LAN standby screen. If a user is
already connected, check the keyword with the connected user.
The EasyMP Multi PC Projection searches for the specified projector on the network.
D Select the projectors you want to connect to from the list
displayed, and then click Join.
The projection control screen is displayed.
s "Using the Projection Control Screen" p.23
Connecting to the Projectors
q
When a projector keyword has been set, the keyword entry screen is
displayed when you connect to the projector. Enter the keyword, and then
click OK.
20
D Select the projectors you want to connect to from the list
displayed, and then click Join.
The projection control screen is displayed.
s "Using the Projection Control Screen" p.23
The projector keyword is displayed on the LAN standby screen. If a user is
already connected, check the keyword with the connected user.
q
Profile search
A Start EasyMP Multi PC Projection.
When a projector keyword has been set, the keyword entry screen is
displayed when you connect to the projector. Enter the keyword, and then
click OK.
The projector keyword is displayed on the LAN standby screen. If a user is
already connected, check the keyword with the connected user.
s "Starting EasyMP Multi PC Projection" p.16
B Click Profile.
C From the Profile list, double-click the folder or the projector
icon for the profile you want to use.
The EasyMP Multi PC Projection searches for the specified
projector on the network.
Connecting to Multiple Projectors (Mirroring)
Connecting to multiple projectors and projecting the same image is
known as mirroring. You can perform mirroring with up to four
projectors.
Connecting to the Projectors
q
You cannot perform mirroring with projectors that are not compatible
with EasyMP Multi PC Projection.
21
• When other participants are already connected to the projector
You can only select the same combination of projectors as the user who
connected before you. You cannot connect to projectors that are not
included in the combination.
Connecting to Projectors on a Different Network
A Start EasyMP Multi PC Projection, and search for the
projectors.
s "Searching for and Connecting to the Projectors" p.18
B Select up to four projectors that you want to connect to from
the list displayed, and then click Join.
The projection control screen is displayed.
q
• When forming a projector mirroring group
If you select one projector from a group, all of the projectors in that group
are selected.
When you select a projector in a mirroring group, you can only select
projectors in that group.
By connecting the projectors to a computer, you can project the
computer's screen at remote locations (on different subnets).
In Automatic search, projectors on different subnets are not found
because searches are only performed in the same subnet.
You can connect to projectors on a different subnet using one of the
following methods.
• Specify either an IP address or projector name and perform a search.
s "Manual search" p.19
• Perform a search based on a profile.
s "Profile search" p.20
22
Operations During a Meeting
This chapter explains how to control the screen being projected during a meeting.
Project Screens
23
See the following table for more details on the function of each item.
Project Screens
1
Change projection buttons
Changes the number of panels available for projecting computer's
screens.
Using the Projection Control Screen
When you connect to projectors, the following screen is displayed.
s "Changing the Number of Projected Screens" p.24
Projects the screen from one computer at full screen
without dividing the projected screen.
Projects the screens from up to two computers at the same
time by dividing the projected screen in two.
A
E
Projects the screens from up to four computers at the same
time by dividing the projected screen in four.
D
2
Screen control buttons
Control the image projected from your computer's screen.
Project the computer's screen as it is.
B
C
Stop projecting. Projects a black screen while it is stopped.
Pause the computer's screen currently being displayed.
The projected screen does not change, even if you make
changes on the computer's screen.
Project Screens
3
User's area
Displays the user names for the computers connected to the
projectors. Your computer is always displayed on the left-hand side of
the user's area. You can connect up to 16 computers to the projector.
When you drag and drop a user's icon to the projection area, the
computer's screen is projected. The background for user's icons that
are currently being projected is white.
The default setting for the user name is the computer name. You can
change the user name in Set options.
s "User Settings Tab" p.44
4
Projection area
24
Changing the Number of Projected Screens
You can divide the projected image into a maximum of four areas. By
changing the number of divisions, you can project screens from multiple
computers at the same time, or project one computer's screen at full
screen.
A Select the user's icon in the projection area.
Move the target frame.
B Click
,
divisions.
When the background color for a panel is white, the computer's
screen for the user's icon in that panel is projected. If there is no user
icon in a white panel, a black screen is projected.
The projected screen is divided in two, and the selected
screen and the next screen are projected.
The projected screen is divided in four, and the computer's
screens in all four panels in the projection area are
projected.
s "Changing the Presenter" p.24
Target frame
Move the target frame by clicking on one of the panels in the
projection area. You can project the computer's screen where the
target frame is positioned when you click one of the change
projection buttons.
q
to change the number of screen
The selected screen is projected at full screen.
By dragging and dropping the user's icon, you can change the screen
being projected and the position at which the computer's screen is
projected.
5
, or
When you click the projector name next to Connected Projector Name,
Web Remote is displayed. In Web Remote, you can make projector
operations on your computer's screen in the same way as using the remote
control.
See your projector User’s Guide for details on Web Remote.
q
You can also change the number of screen divisions by right-clicking in the
projection area. Right-click the icon, and then select the number of
divisions.
Changing the Presenter
When changing the projection screen
Project Screens
Drag and drop an icon in the user's area to the panel you want to project.
25
q
When
or
are selected, you can change the computer's screen
being projected by switching the icon being projected (the icon in the white
panel) with an icon not being projected (the icon in the black panel).
Outputting Audio from the Projector
You can output the computer's audio from the projector when one
computer is connected to one projector and is projecting in full screen.
To finish projecting, drag and drop the icon from the projection area to
the user's area.
q
By right-clicking an icon in the user's area, you can set the projection
position.
When changing the projection position
In the projection area, drag and drop an icon you want to move to the
target position.
Ending the Meeting
Ending the Meeting
When you want to end a session, use one of the following methods to
disconnect from the projectors.
When only you disconnect
Right-click your icon in the user's area, and then select Leave.
can also disconnect by selecting Leave from the Tool menu.
qWhenYouending
the session
Select End Session from the Tool menu. All computers and projectors
participating in the session are disconnected.
26
27
Holding Frequent Meetings with Ease
This chapter explains how to save and organize projector information used during a meeting allowing you to hold subsequent meetings with ease.
Saving Projector Information
Saving Projector Information
By saving the projector information used during the first meeting, you
can participate smoothly in subsequent meetings when they are held in
the same environment.
You can save projector information by creating a shortcut or registering
the information to a profile.
Creating a Shortcut
When creating a shortcut, information for the selected projectors is saved
in the shortcut file. When you start EasyMP Multi PC Projection from
the shortcut, EasyMP Multi PC Projection automatically searches for the
projectors saved in the shortcut file.
When holding regular meetings in the same environment, creating a
shortcut allows you to start meetings smoothly.
You can use one of the following methods to create a shortcut:
• Right-click the projector to be saved from the Profile or Projector List,
and then select Create Shortcut.
• Select the projector to be saved from the Profile or Projector List, and
then drag and drop to the location where you want to create the
shortcut.
q
Creating a folder shortcut saves information for multiple projectors
contained in the folder.
You can search for multiple projectors at the same time when you start the
program.
28
Registering a Profile
You can save information for the projectors you have searched for in a
profile. When connecting to the same projectors next time, you can easily
search for the projectors.
You can register a profile by using one of the following methods.
Saving Projector Information
A When registering projectors from the List of Connected
Projectors
If you want to register projectors displayed in the List of Connected
Projectors to a Profile, click Register.
When only registering a specific projector
If you want to register one specific projector to a profile, right-click
the projector you want to register from the projector list, and then
select Add Item to Profile.
When registering all projectors found by the search
Right-click one of the projectors in the projector list, and then select Add All to Profile. You can register all of the projectors displayed in the projector list.
29
B Enter the projector name and select or create the folder
where you want to save the profile, and then click OK.
q
• To register a projector, you can drag and drop the projector you want to
register from the projector list to the Profile list folder.
• The folder structure can be six folders deep.
Sharing a Profile
You can share the created profile list with other participants. This allows
participants joining a session for the first time to easily search for the
projectors.
Saving Projector Information
Exporting the profile you want to share
Follow the steps below to export the registered profile.
A In the profile list, right-click the folder containing the profile
you want to share, and then select Export.
B Select where you want to save the profile (.mplist), and then
save the profile.
Importing the shared profile
Follow the steps below to import the shared profile to EasyMP Multi PC
Projection.
A In the profile list, right-click the folder containing the profile
you want to import, and then select Import.
B Select the profile (.mplist), and then click Open.
Click OK to complete the import.
q
You can also import a profile (.plist) exported using EasyMP Network
Projection. However, you cannot import a profile in which the projectors
connected using Quick connection mode.
30
31
Troubleshooting
This chapter identifies possible problems and explains how to handle them.
Limitations
Limitations
When projecting computer images while running EasyMP Multi PC
Projection, the following restrictions apply.
32
Display Color
The following number of screen colors can be projected.
Windows
Supported Resolutions
The following computer screen resolutions can be projected. You cannot
connect to a computer with a resolution greater than WUXGA.
• VGA (640 × 480)
• SVGA (800 × 600)
• XGA (1024 × 768)
• SXGA (1280 × 960)
• SXGA (1280 × 1024)
• SXGA+ (1400 × 1050)
• WXGA (1280 × 768)
• WXGA (1280 × 800)
• WXGA+ (1440 × 900)
• UXGA (1600 × 1200)
• WUXGA (1920 × 1200)
When using a computer screen with a unique aspect ratio, depending on
the resolution of the computer and the projector, increase or decrease the
resolution so as not to impair the image quality.
Depending on the resolution, at times the vertical or horizontal margins
may be projected in black.
Mac OS X
16-bit color
About 32,000 colors (16-bit)
32-bit color
About 16.7 million colors (32-bit)
Number of Connections
You can connect up to four projectors to one computer and project
simultaneously. (Multi-screen is not supported.)
You can connect up to 32 computers to one projector at the same time.
(Up to 16 computers, if any of the computers are running an older
version of the EasyMP Multi PC Projection software [version 1.05 or
older].)
Other Limitations
• If the transmission speed of the Wireless LAN is low, the network
might be cut off unexpectedly.
• Audio can only be transferred when connected to one projector and
projecting one computer's screen at full screen. If multiple projectors
are connected or if the projected screen is divided, audio cannot be
transferred during projection.
• When videos are played back, they do not play back as smoothly as
when displayed on the computer.
• Applications that use part of DirectX functions may not be displayed
correctly. (Windows only)
• Cannot project full screen MS-DOS prompts. (Windows only)
Limitations
• The image on the computer screen and the image projected by the
projector may not match exactly.
When Using Windows 8/Windows 7/Windows Vista
33
• A few minutes after you connect a computer to the projector over a
network with EasyMP Multi PC Projection, the following message may
be displayed.
It is recommended that you select Keep the current color scheme, and
don't show this message again. This selection is enabled until the
computer is restarted.
Note the following points when using EasyMP Multi PC Projection with
a computer running Windows 8/Windows 7/Windows Vista.
Limitations when projecting from Windows Photo Gallery
or Windows Live Photo Gallery
Note the following two limitations when launching Windows Photo
Gallery or Windows Live Photo Gallery when EasyMP Multi PC
Projection is running.
• Slide Shows are played back in simple mode when projecting from
Windows Photo Gallery or Windows Live Photo Gallery.
Because the toolbar is not displayed, you cannot change the Theme
(effects) while playing a slide show, regardless of the Windows
Experience Index rating.
• You cannot play movies.
Other Limitations
Limitations in Windows Aero (Windows 7/Windows Vista)
Note the following two limitations when the window design for your
computer is Windows Aero.
• The layered window is projected regardless of the Transfer layered
window setting from Set options in EasyMP Multi PC Projection.
s "Adjust Performance Tab" p.45
• Cannot project Windows Media Center images at full screen. You can
project in Window display.
• If audio stops during playback when transferring audio from the
computer to the projector using EasyMP Multi PC Projection, try
restarting the application you are using.
Solving Problems
34
Solving Problems
Cannot connect to the projector you want to use
Cannot connect the projector and the computer via wireless LAN
Check
Is the Wireless LAN unit connected?
Remedy
Check that the Wireless LAN unit is securely connected.
Is the projector connection mode set to Quick connection EasyMP Multi PC Projection cannot connect using Quick connection mode. Set the connection mode
mode?
to Advanced connection mode. See your projector User’s Guide for details.
For wireless LAN connections, is the wireless LAN setting
enabled when the computer is in power save mode?
Enable the Wireless LAN.
Are there any obstacles between the wireless LAN
connection access point and the computer or projector?
Sometimes the indoor environment prevents the projector from being found in a search. Check for
any obstacles between the access point and the computer or projector, and change their position to
improve communication.
Is the computer's wireless LAN radio strength set to low?
Set the radio strength to maximum.
Does the Wireless LAN conform to 802.11a, 802.11b, or
802.11g?
It is only compatible with standards 802.11a, 802.11b, and 802.11g, and not with other standards such
as 802.11.
Is Wireless LAN Power set to Off in the projector's
Wireless LAN menu?
Set Wireless LAN Power to On in the projector's Wireless LAN menu from the Configuration menu.
See your projector User’s Guide for details on the projector's wireless LAN settings.
Is the SSID setting different?
Set the computer, the access point, and the projector to the same SSID.
Is the same WEP key set?
When selecting WEP from Security, set the access point, the computer, and the projector to the same
WEP key.
Solving Problems
35
Cannot connect the projector and the computer via wired LAN
Check
Is the network cable connected correctly?
Remedy
Check that the network cable is securely connected.
Are the computer's LAN card and the built-in LAN function Check that LAN is valid by checking the device manager under Control Panel - System - Hardware.
available?
Is the DHCP function for Wired LAN turned On?
Turn off the DHCP setting for Wired LAN from the Configuration Menu before connecting.
When DHCP is set to ON in Advanced connection mode, if an available DHCP server is not found, it
may take a while to enter LAN standby status.
See your projector User’s Guide for details on the projector's wired LAN settings.
Are connection denial functions, such as MAC Address
restrictions and port restrictions, set correctly at the
access point?
Set the projector to allow connections from the access point.
Are the IP address, the subnet mask, and the gateway
address for the access point and the projector set
correctly?
When not using a DHCP, adjust each setting.
Cannot connect the projector and the computer via the network
Check
Remedy
Is the Network Configuration screen displayed on the
projector?
Close network settings on the projector, and return to the LAN standby screen. If the Network
Configuration screen is displayed on the projector, you cannot connect using EasyMP Multi PC
Projection.
Is the firewall turned off, or has the firewall been
registered as an exception?
When you do not wish to turn off the firewall or register the firewall as an exception, make the
necessary settings to open the ports.
The ports used by EasyMP Multi PC Projection are "3620", "3621", and "3629".
Was the network adapter being used selected correctly
with EasyMP Multi PC Projection?
If the computer has multiple LAN environments, it cannot connect unless the network adapter is
selected correctly. When using a computer running Windows, start EasyMP Multi PC Projection, and
select the network adapter you are using from Switch LAN in Set options.
s "General Settings Tab" p.44
Solving Problems
36
Check
Remedy
Are the access point and the projector's subnet different? Select Manual search from EasyMP Multi PC Projection, and then specify the IP address to connect.
s "Manual search" p.19
Does the projector support the EasyMP Multi PC
Projection version being used?
Install EasyMP Multi PC Projection from the EPSON Projector Software CD-ROM supplied with the
projector.
Do you have the latest version of EasyMP Multi PC
Projection?
Only 16 computers can be connected under either of the following conditions.
• When any of the computers is running an older version (Ver. 1.05 or older) of EasyMP Multi PC
Projection.
Install the latest version of EasyMP Multi PC Projection on all computers when connecting 17 to 32
computers.
You can check the EasyMP Multi PC Projection version from Set options.
s "Adjust Performance Tab" p.45
• When any of the connected projectors can only connect up to 16 computers.
Cannot select the projector
Check
Remedy
Are you trying to combine a set of projectors that differs
from a combination created by a user who is already
connected?
When another user is already connected, you can only connect to the projectors in the combination
selected by the other user. Select a projector from the same combination as the user who is already
connected, or select a projector that is in standby status.
Solving Problems
37
The Screen is not Projected
The movie image and audio are not displayed, the image is slow to appear, or either the video or audio stop when
projecting using EasyMP Multi PC Projection
Check
Remedy
Did you try to play back movies with Media Player or try to Depending on the computer, the movie playback screen in Media Player may not be displayed, and
operate the screen saver preview?
the screen saver preview may not be displayed normally.
Is WEP encryption enabled?
When WEP encryption is enabled, display speed decreases.
Have you enabled DHCP?
When DHCP is set to On in Advanced connection mode or wired LAN connection, if an available DHCP
server is not found, it may take a while to enter LAN standby status.
Was EasyMP Multi PC Projection started while a movie was When playing back movies, start EasyMP Multi PC Projection first before starting play back. If EasyMP
playing, or were the resolution and color number
Multi PC Projection is started during movie play back and the display screen resolution and color
changed?
numbers are changed, try moving the movie playback window, minimizing it, or resizing it and so on.
(For Mac OS X)
Are you using a computer that does not meet the
software requirements?
When using a computer that does not meet the software requirements, images and audio for movies
may stop.
s "Software Requirements" p.6
Is Make the movement of the mouse pointer smooth
selected?
Is Transfer layered window selected?
Do one of the following to stop the mouse pointer from flickering on the screen.
• Select Make the movement of the mouse pointer smooth.
s "General Settings Tab" p.44
• Clear Transfer layered window.
s "Adjust Performance Tab" p.45
Solving Problems
38
No audio from the projector when connecting with EasyMP Multi PC Projection
Check
Remedy
Are multiple projectors connected to one computer?
Audio can only be transferred to one projector. Cut the current connection, and then select one
projector from the search screen.
Are you projecting a divided screen from multiple
computers?
You can only output the computer's audio from the projector when projecting one computer's screen
at full screen. Only project one screen.
s "Changing the Number of Projected Screens" p.24
Is audio set to output from the computer in Set options?
Select Output audio from the projector on the Audio Output tab in Set options.
s "Audio Output Tab" p.46
When a connection is made using EasyMP Multi PC Projection, a PowerPoint Slide Show cannot be started.
Check
Remedy
Was EasyMP Multi PC Projection started while PowerPoint When connecting with EasyMP Multi PC Projection, make sure you close PowerPoint first. Slide Show
was running?
might not run if connecting while PowerPoint is running.
(For Windows)
When a connection has been made using EasyMP Multi PC Projection, the screen will not be refreshed when using an Office
application.
Check
Is the mouse moved continuously?
Remedy
When you stop moving the mouse pointer, the screen is updated. If the screen does not update
quickly, stop moving the mouse pointer.
Error Message List
39
Error Message List
Error Messages when Starting up EasyMP Multi PC Projection
Error Messages
This application is already running.
Remedy
Two instances of EasyMP Multi PC Projection have been started.
Cannot start this application because other EPSON
Close the other projector software and then start EasyMP Multi PC Projection.
Projector software (Quick Wireless Connection) is already
running.
Cannot start this application because other EPSON
Projector software (USB Display) is already running.
Cannot start this application because other EPSON
Projector software (EasyMP Network Projection) is already
running.
EasyMP Multi PC Projection initialization failed.
Restart EasyMP Multi PC Projection. If the message still appears, uninstall and then reinstall EasyMP
Multi PC Projection.
s "Uninstalling the Software" p.47
s "Installing the Software" p.6
Cannot open the shortcut file.
The shortcut file may be corrupted. Start EasyMP Multi PC Projection, and then try searching for and
connecting to the projectors again.
s "Starting EasyMP Multi PC Projection" p.16
s "Searching for and Connecting to the Projectors" p.18
Files are missing or invalid. Failed to start the application. Uninstall and then reinstall EasyMP Multi PC Projection.
Reinstall/remove the application.
s "Uninstalling the Software" p.47
s "Installing the Software" p.6
Network adapter information could not be obtained.
Use a computer that can connect to LAN.
Cannot start from the shortcut while projecting.
Because the projector is already projecting using EasyMP Multi PC Projection, you cannot start from
the shortcut. Stop projecting and then start from the shortcut.
Error Message List
40
Error Messages
Remedy
Cannot start from the shortcut while the Option screen is The Option screen is displayed. Close the Option screen.
displayed. Close the Option screen, and then try opening
the shortcut again.
The slide show may will not begin until PowerPoint is
restarted.
Close PowerPoint, and then start again.
Cannot be used with current OS version. Reinstall EasyMP If you update your operating system from Windows 7 to Windows 8, reinstall EasyMP Multi PC
Multi PC Projection.
Projection.
Error Messages when Searching for and Selecting Projectors
Error Messages
Cannot join. The maximum number of participants has
been exceeded.
Remedy
32 computers are already connected to the projector. Disconnect users and projectors that are not
projecting screens.
s "Ending the Meeting" p.26
The keyword does not match. Re-enter the keyword
displayed on the projector screen.
Check the Projector Keyword displayed on the LAN standby screen, and enter the Projector Keyword.
If a user is already connected, check the Projector Keyword with the connected user.
Connection failed due to keyword mismatch.
Reconnect to the projector. Enter the Projector Keyword on the keyword entry screen displayed when
you connect.
Check the Projector Keyword that is displayed on the projector's LAN standby screen. If a user is
already connected, check the Projector Keyword with the connected user.
Updating display configuration. Please try again in a few
minutes. Select another projector.
When another user is already connected, you can only connect to the projectors in the combination
selected by the other user. Select a projector from the same combination as the user who is already
connected, or select a projector that is in standby status.
One or more projectors are not responding.
You cannot connect to multiple projectors simultaneously. Check the network settings on the
computer and the network settings on the projector.
A network error occurred.
Try connecting again. If it still does not connect, check the network settings on the computer and the
network settings for the projector.
Connection to the projector failed.
Cannot connect to a projector that is already connected using EasyMP Network Projection. Check if
the projector you want to connect to is already connected to EasyMP Network Projection.
Error Message List
41
Error Messages when Projecting
Error Messages
Remedy
The projector has disconnected.
An error may have occurred in the projector. Check the projector's indicators. See your projector User’s
Guide for details.
A network error occurred.
A network error occurred. Check the connection between the computer and the projector.
Error Message when Operating a Profile
Error Messages
Remedy
Enter max. 32 characters.
The entered text exceeds 32 characters. Shorten the name to 32 characters or less.
Enter a folder name.
No folder name entered. Enter a folder name.
Folders should not be created more than 6 layers deep.
The folder structure is deeper than six folders. Create the new folder higher up in the folder structure.
There is already a folder named XXX in this folder.
A folder with the same name already exists. Enter another name.
There is already a projector file named XXX in this folder.
A projector with the same name already exists. Enter another name.
Cannot import. Format not supported by this application. Check the profile you want to import. You cannot import a profile for projectors connected using
Quick connection mode in EasyMP Network Projection.
Also, you cannot import when projector information has not been registered, or when the profile is
corrupt.
Cannot import because the folder structure exceeds six
folders.
If you import, the folder structure will exceed six layers. Import to a folder higher up in the folder
structure.
Cannot move because the folder structure exceeds six
folders.
If the folder is moved, the folder structure will exceed six folders. Import to a folder higher up in the
folder structure.
42
Appendix
Set Options
Set Options
You can display the Set options screen by using one of the following
methods.
• Click Set options on the search screen.
43
• Select Set options from the Tool menu on the projection control
screen.
q
If you display the Set options screen from the projection control screen,
neither the User Settings tab or the General settings tab are displayed.
Set Options
44
User Settings Tab
General Settings Tab
User name
Set the user name displayed in the user's area. You
can enter up to 32 characters.
Manual search
Delete the input history for Manual search.
Restore Defaults
You can reset all adjustment values for Set options
to their default settings. However, you can retain
the setting for Switch LAN in General settings.
Encrypt
communications
Select to encrypt and transmit data. Even if data is
intercepted, it cannot be decrypted.
Display in high
resolution when
dividing the
projected screen
in two or four
Select to display all divided screens in high
resolution. Clear this setting if displaying the image
takes too long or is interrupted. (Only available for
projectors with a resolution of WUXGA
(1920 x 1200).)
Make the
movement of the
mouse pointer
smooth
Windows 7/Windows Vista/Windows XP only
Select to prevent the mouse pointer from flickering
when Transfer layered window is selected in
Adjust performance. (When Windows Aero is
selected as the theme in Windows Vista/7,
Windows Aero turns off by selecting this setting.)
Set Options
Switch LAN
45
Windows only
Adjust Performance Tab
This is used to switch the network adapter to be
used for a search when a computer has multiple
adapters.
By default, all of the network adapters are used to
perform a search. When a wired LAN is always used
as the connection method, select a wired LAN
adapter.
Restore Defaults
You can reset all adjustment values for Set options
to their default settings. However, you can retain
the setting for Switch LAN in General settings.
Performance
adjustment slider
The performance can be set to Fast, Normal, and
Fine.
Set to Fast when movie projections are
interrupted.
Lower the
resolution and
transfer
Only available for projectors with a resolution of
WUXGA (1920 x 1200).
Select to reduce the size of the data to be
transferred to the projector by lowering the
resolution. Use this option on a slow network or
when displaying the image takes too long or is
interrupted. (This is not available when dividing
the projected screen in two or four.)
Set Options
Transfer layered
window
46
Windows XP only
Audio Output Tab
The layered window is in use when contents such
as messages displayed on the computer are not
projected by the projector. Select this check box to
project contents such as messages that use the
layered window.
If the mouse pointer flickers on the screen, select
Make the movement of the mouse pointer
smooth in General settings.
Version
Displays EasyMP Multi PC Projection version
information.
Restore Defaults
You can reset all adjustment values for Set options
to their default settings. However, you can retain
the setting for Switch LAN in General settings.
Output audio from Select to output the computer's audio from the
projector. Clear to output audio from the
the projector
computer.
You can only output the computer's audio from
the projector when projecting one computer's
screen at full screen.
Restore Defaults
You can reset all adjustment values for Set options
to their default settings. However, you can retain
the setting for Switch LAN in General settings.
Uninstalling the Software
Uninstalling the Software
Uninstalling
Make sure you check the following points before starting uninstallation.
• For Windows, you need administrator authority to uninstall EasyMP
Multi PC Projection.
• Close all running applications before starting uninstallation.
For Windows 8
From the Start menu, right-click EasyMP Multi PC Projection
Ver.X.XX and select Uninstall to uninstall EasyMP Multi PC Projection.
For Windows Vista/Windows 7
A Click Start, and then Control Panel.
B Click Uninstall a program from Programs.
C Select EasyMP Multi PC Projection, and then click Uninstall.
For Windows XP
A Click Start, and then Control Panel.
B Double-click Add/Remove Programs.
C Select EasyMP Multi PC Projection, and then click Remove.
For Mac OS X
A Open the Applications folder.
B Open the EasyMP Multi PC Projection - Tools folder, and then
double-click EasyMP Multi PC Projection Uninstaller.
47
C Follow the on-screen instructions to uninstall.
Notices
Notices
Copyright Notice
All rights reserved. No part of this publication may be reproduced, stored
in a retrieval system, or transmitted in any form or by any means,
electronic, mechanical, photocopying, recording, or otherwise, without
the prior written permission of Seiko Epson Corporation. No patent
liability is assumed with respect to the use of the information contained
herein. Neither is any liability assumed for damages resulting from the
use of the information contained herein.
Neither Seiko Epson Corporation nor its affiliates shall be liable to the
purchaser of this product or third parties for damages, losses, costs, or
expenses incurred by the purchaser or third parties as a result of:
accident, misuse, or abuse of this product or unauthorized modifications,
repairs, or alterations to this product, or (excluding the U.S.) failure to
strictly comply with Seiko Epson Corporation's operating and
maintenance instructions.
Seiko Epson Corporation shall not be liable against any damages or
problems arising from the use of any options or any consumable
products other than those designated as Original Epson Products or
Epson Approved Products by Seiko Epson Corporation.
This information is subject to change without notice.
Illustrations in this guide may differ from the actual projector.
48
Regarding the use of Names
Microsoft® Windows® XP Professional operating system
Microsoft® Windows® XP Home Edition operating system
Microsoft® Windows Vista® operating system
Microsoft® Windows® 7 operating system
Microsoft® Windows® 8 operating system
In this guide, the operating systems above are referred to as "Windows
XP", "Windows Vista", "Windows 7", and "Windows 8". Furthermore, the
collective term Windows may be used to refer to Windows XP, Windows
Vista, Windows 7, and Windows 8, and multiple versions of Windows
may be referred to as, for example, Windows XP/Vista, with the
Windows notation omitted.
Mac OS X 10.4.x
Mac OS X 10.5.x
Mac OS X 10.6.x
Mac OS X 10.7.x
Mac OS X 10.8.x
In this guide, the operating systems above are referred to as "Mac OS X
10.4.x", "Mac OS X 10.5.x", "Mac OS X 10.6.x", "Mac OS X 10.7.x", and
"Mac OS X 10.8.x". Furthermore, the collective term "Mac OS X" is used
to refer to them all.
Regarding Screen Shots
Unless specifically stated, screen shots used in this operation guide are
taken from Windows 7.
You see the same screens even when using Mac OS X.
Notices
Trademarks
IBM, DOS/V, and XGA are trademarks or registered trademarks of
International Business Machines Corporation.
Macintosh, Mac, Mac OS, and iMac are trademarks of Apple Inc.
Microsoft, Windows, Windows NT, Windows Vista, Windows 7, PowerPoint,
and the Windows logo are trademarks or registered trademarks of
Microsoft Corporation in the United States.
Other product names used herein are also for identification purposes only
and may be trademarks of their respective owners. Epson disclaims any and
all rights in those marks.
Software Copyright:
This product uses free software as well as software to which this company
holds the rights.
Z 2013 Epson America, Inc.
3/13
CPD-38871
49
Download PDF

advertising