LIP-7016D/7024D IP Telephone Description Quick Guide

LIP-7016D/7024D IP Telephone Description Quick Guide
LIP-7016D/7024D IP Telephone Description
Quick Guide
※ The number of flexible buttons may be different between LDP-7016D and LDP-7024D.
Fixed Feature button definition
Button
Description
Speed
Used to access speed dialing, speed programming, save number redial, and last
number redial.
DND/Fwd
The DND (Do Not Disturb) feature blocks all incoming calls. When DND is active,
the red LED in this button is illuminated.
It is also used to activate call forward, e.g. to another station or voicemail. When
call forward is activated, the red LED flashes.
Speaker
Speaker toggles the speakerphone state, and the red LED is illuminated when
the speakerphone is active.
Hold/Save
This button is used to put a call on hold or save information when programming.
Flexible
Some flexible buttons are pre-programmed in the system for line appearances,
loop functions etc. The remaining flexible buttons can be user-programmed.
3 Soft
Buttons
Used in conjunction with fixed and flexible features, and the function changes in
relation to call progress, as indicated on the LCD display.
Trans/PGM
This button is used to initiate a call transfer (TRS) or to enter programming mode
(PGM)
Call back
A station can initiate a call back request to a busy station. Once that station
becomes idle, the initiating station is signaled.
Volume
The volume button adjusts the audio levels for ringing, handset and
speakerphone functions.
Menu
The menu button is used to move to the desired option (Dial, MSG, Program),
and to select the next screen when indicated by an arrow on the LCD display.
Phonebook
Used to make a call with phonebook, which searches saved station names or
speed dial names.
Earphone-Jack Socket
Used to connect optional headset to the phone.
Visual Ringing LED
Illuminates when the phone is ringing.
LCD Display
Displays information about telephone status, dialing directories, and test
message information.
Hands-free Microphone
Microphone is used for hands-free speakerphone function.
LIP Keyset User Operation
Receiving calls _ Answering a Call While Idle :
1. Lift the handset and press the flashing Flex button (as
needed), the call will be connected.
Responding to a Call While Busy
1. Press Hold/save and/or
2. Press the flashing CO line button.
Answering Calls to Other Stations
To answer a call ringing at another station:
1. Lift the handset,
2. Dial 7 (Directed Call Pick-Up code),
3. Dial the Intercom Number of the ringing station; the
call will be connected.
To answer a call ringing at a station in your
group:
1. Lift the handset,
2. Dial 566 (Group Call Pick-Up code), the call is
connected.
Using Do-Not-Disturb (DND) to Block Incoming
Calls
To toggle DND ON and OFF:
1. Press the DND button.
Forwarding calls to another Station or Voice
Mail
To activate Call Forward from your phone to
another phone or internal system resource:
1.
2.
3.
4.
Lift the handset,
Press the Fwd Soft button,
Dial the type of forward code 1-9 (iPECS: 1-5)
Dial the destination number.
Placing Intercom calls
To place an Intercom call:
1. Lift the handset,
2. Dial the Intercom number of the desired station,
3. On answer or Splash tone, speak to the called party.
Using Camp-On when calling a busy station
To Camp-On (wait off-hook) for a busy station:
1. Press * and wait an answer.
Using Last Number Redial (LNR)
To dial the Last Number for an external call:
1. Lift the handset,
2. Select the Redial Soft button,
3. Press ▼ volume ▲ to select from the last 10
numbers dialed,
4. Press the Send Soft button or hold/save.
Using System Speed Dial Numbers
To place a call using System Speed Dial:
1. Lift the handset,
2. Press the Speed button,
3. Dial the desired System Speed Dial bin number
Using and Entering Station Speed Dial
Numbers
To place a call using Station Speed Dial:
1. Lift the handset,
2. Press Speed,
3. Dial the desired Station Speed Dial bin number
To enter a Station Speed Dial number with CO
Line and Name:
1.
2.
3.
4.
5.
6.
7.
Press Trans/Pgm,
Press speed,
Dial the desired Station Speed Dial bin number,
Select/dial the CO line/group,
Dial the desired number to be stored,
Press hold/Save,
Enter the associated name if desired, using the
alpha-numeric entry chart,
8. Press hold/Save.
To assign a Station Speed Dial number directly
to a Flex button:
1.
2.
3.
4.
5.
6.
7.
Press Trans/pgm,
Press the desired Flex button,
Select the Tel Num Soft button,
Select/dial the CO line/group,
Dial the desired number,
Press hold/Save,
Enter the associated name if desired, using the
Character Entry chart,
8. Press hold/Save.
ACNR: To retry a busy external number until
answered
To set up an ACNR, while on an outgoing call:
1. Use the Navigation button to display the next menu
and select the ACNR Soft button,
2. Hang-up handset.
To cancel the ACNR request:
1. Press the ACNR Soft button.
Call Transfer: Sending a call to a different
destination
To Transfer an active call:
1. Press Trans/pgm,
2. Call receiving party,
3. Hang-up with or without announcement.
Call Hold: Placing a call in a waiting state
To place a call on Hold:
1. Press Hold/save.
Joining Multiple People in a Conference
To establish a Conference:
1. Establish call with one of the desired conference
parties,
2. Select the Conf Soft button,
3. Establish call with the other conference party,
4. Select the Conf Soft button,
5. Select the Conf Soft button again to establish the
conference.
To place a Conference on Hold:
1. Press the hold/save button.
To retrieve the Conference:
1. Select the Conf Soft button.
To make an External-parties-only Conference:
1. Establish conference with two external parties,
2. Select the Conf Soft button to exit.
To enter pre-opened Conference Room:
1. Dial 5 7 X (iPECS: 5 9 X) when X is the conference
room number.
User Program Codes
• Press the [TRANS/PGM] button ▶ Press the flexible button to be programmed
• ▶ Press [Trans/Pgm] button again ▶ Enter the desired feature code below table
• ▶ Press the [HOLD/SAVE] button to save.
LDK
Code
iPECS
Code
LDK
Code
iPECS
Code
11
-
Ring Type
78
7*
14
10
Enblock mode
7*
-
17
19
Ear-Mic Headset
80
84
Account Code
18
11
ICM Ring
81
34
DID Call Wait
19
12
CO Ring
84
85
LOOP Button
21
21
COS Down
85
88
Camp-on
22
22
COS Restore
86
86
INTURSION
23
23
Walking COS
87
-
24
-
COS Change
89
89
31
33
Auth. Code Register
8*
-
ACD STATUS (group only)
32
34
Auth. Code Change
8#
-
PAGER CALL
34
38
Mobile Ext Activation
91
91
CONF Button
36
-
Mobile Ext Hunt Call
92
92
CALLBK Button
41
41
Set Wake-up Time
93
-
42
42
Wake-Up Erase
94
94
FLASH Button
43
53
Conf-Room Activate
95
95
MUTE Button
44
54
Conf-Room Deactivate
96
96
MON Button
45
14
Call Coverage
97
97
REDIAL Button
46
-
Call Coverage For STA XXX
98
-
DID RESTRICTION
51
51
Set Pre-Selected MSG
99
-
DISA RESTRICTION
52
52
Set Customer MSG
9*
-
USB CALL RECORD
54
80
Two Way Record
*0
*0
HOTDESK Agent Login
57
57
Call Log
**
**
HOTDESK Agent Logout
61
-
Record User Greeting
-
31
STA Msg. Wait Retrieve
62
-
Listen Time & Date
-
32
CLI/IP Msg. Wait Retrieve
63
-
Listen Station Number
-
35
Msg. Wait in Exec/Sec pair
64
-
Listen Station Status
-
75
Display Phone IP Address
65
-
Record Page MSG
-
76
Change Phone IP Address
66
-
Erase User Greeting
-
77
Display Phone MAC IP Address
67
-
Erase Page MSG
-
78
Change Mode
71
71
LCD Display Language
-
79
Display Phone Version
73
73
Background Music
-
93
DND Button
74
74
Register Station Name
-
98
FWD Button
75
61
Speakerphone / Headset
-
99
PTT Button
76
62
Headset Ring Mode
Function
http://www.LG-Nortel.com
Function
Display Serial number/Package
for SMEMU
USB Always Record
HUNT DND (group only)
KEY PAD FACILITY
DND / FWD Button
P/N : MMBB0000000
Important Safety Information
To prevent the unexpected danger or damage please read this information before installing and
repairing the phone. There are “Caution” and “Warning”, it means as follows;
Warning: To reduce the possibility of electric shock, do not expose your phone to high humidity areas,
such as a bathroom, swimming area, etc.
Caution: Use only LG-Nortel approved batteries and desktop chargers to avoid the damage to the phone.
Using other batteries or chargers voids your warranty and may cause an explosion.
Warning
Caution
1. Only trained and qualified service personnel shall
install, replace or service the phone.
2. Do not spill liquid like water on the phone. If so,
call for the service center as this may result in
a fire or an electric shock.
3. If you see smoke or smell something during,
unplug the power cord and the phone line. Call for
service centre immediately.
4. If the power adapter is used, do not touch the plug
with wet hands. This may result in a fire or an
electric shock.
5. Do not tug the power cord or the phone line. This
may result in a fire, an electric shock or
equipment damage.
6. Do not use the phone during a thunderstorm.
Lightning strike may result in a fire, severe
electrical or acoustic shock.
7. Do not use the power adapter if the power cord or
wall outlet are damaged. This may result in a fire
or an electric shock.
1. Ensure that children do not pull on phone cords.
This may injure children or result in equipment
damage.
2. The ear-piece houses a magnetic device which
may attract pins or small metal objects. Keep
handset clear of such objects and check before use.
3. Avoid placing the phone in an area that is dusty,
damp or subject to vibration.
4. Choose a site that is dry and well ventilated.
5. Do not plug multiple plug-packs into one power
outlet. This may result in overheating of the plugpacks and result in a fire or plug-pack failure.
6. Do not put the heavy things on the phone.
7. Do not drop or throw the phone.
8. Static electricity discharge will damage electronic
components.
9. Keep out of direct sunlight and away from heat.
10.No user serviceable parts inside. No not insert a
screw driver or any metal objects into the phone.
This may cause electric shock or damage the
equipment and will render the warranty void.
11.Clean the phone with a soft, dry cloth only. Do not
use volatile liquids such as petrol, alcohol or
acetone as this may cause a fire or result in
discoloration or damage to plastics. Do not clean
with wax or silicon products as these may enter the
equipment and cause operation to become
unreliable.
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is attached to a product it means the product
is covered by the European Directive 2002/96/EC.
2.
All electrical and electronic products should be disposed of separately from the municipal
waste stream via designated collection facilities appointed by the government or the local
authorities.
3.
The correct disposal of your old appliance will help prevent potential negative
consequences for the environment and human health.
4.
For more detailed information about disposal of your old appliance, please contact your
city office, waste disposal service or the shop where you purchased the product.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement