advertisement
OWNER’S MANUAL
HRX217HYA
LAWN MOWER
Before operating the mower for the first time, please read this
Owner’s Manual. Even if you have operated other mowers, take time to become familiar with how this mower works and practice in a safe area until you build up your skills.
QUICK FIND
Air Filter..................................................
Blades ....................................................
Contact Honda .......................................
Cutting Height ..........................................
CONTENTS
FOR YOUR SAFETY ..............................
PARTS AND CONTROLS ......................
INITIAL MOWER SETUP........................
Adjust the Handlebar...........................
Assemble the Grass Bag.....................
Check Your Mower..............................
Check Your Mowing Area....................
Clip Director® ......................................
Cutting Height Adjustment...................
Check the Oil Level .............................
Add Fuel ..............................................
Safe Mowing Practices........................
Operating the Controls ........................
Starting the Engine..............................
Stopping the Engine ............................
Maintenance Safety.............................
Find a Dealer..........................................
Fuel ..........................................................
Fuel System Maintenance......................
Maintenance Schedule...........................
Oil Change..............................................
Oil Level Check.........................................
Spark Plug ..............................................
Warranty Coverage.................................
Maintenance Schedule......................
Blade Inspection................................
Blade Replacement ...........................
Oil Change ........................................
Air Filter .............................................
Spark Plug.........................................
Spark Arrester (optional part) ............
TRANSPORTING .................................
Fuel ...................................................
Oil ......................................................
Cleaning ............................................
Storage Location ...............................
Handlebar..........................................
Removing From Storage ...................
Engine Will Not Start .........................
Loss of Power.......................................
Vibration ...............................................
Mowing and Bagging Problems............
Serial Number Locations ......................
High Altitude Operation ........................
Emission Control System .....................
Air Index ...............................................
Specifications .......................................
FUEL SYSTEM MAINTENANCE.............
Parts, Accessories, and Service Items.
Dealer Locator Information...................
How to Contact Honda .........................
Honda Publications ..............................
DISTRIBUTOR’S LIMITED WARRANTY.
EMISSION SYSTEM WARRANTY ..........
PRODUCT REGISTRATION ...................
For more information about your lawn mower, visit our website at www.powerequipment.honda.com
and click on FAQs or scan the QR code shown here.
© 2013 American Honda Motor Co., Inc.
All Rights Reserved
QUESTIONS?
Contact your Honda dealer.
There is a dealer locator at www.powerequipment.honda.com
2
WELCOME
Congratulations on your selection of a Honda lawn mower! We are certain you will be pleased with your purchase of one of the finest lawn mowers on the market. We want to help you get the best results from your new mower and to operate it safely. This manual contains information on how to do that; please read it carefully.
When your mower needs scheduled maintenance, keep in mind that
Honda Power Equipment servicing dealership personnel are specially trained in servicing Honda lawn mowers and are supported by the parts and service divisions of American Honda.
Please read the DISTRIBUTOR’S LIMITED WARRANTY on
and the EMISSION CONTROL SYSTEM WARRANTY on
fully understand what is covered by warranty and your responsibilities of ownership.
FOR YOUR SAFETY
WARNING
The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects, or reproductive harm.
Important Message to Parents
The safety of your children is very important to Honda. Lawn mowers are tools, not toys. As with any equipment, bad judgments can result in serious injuries. Your child must be big enough, strong enough, and have the coordination necessary to comfortably reach and operate the controls. Anyone who takes unnecessary risks and doesn’t obey rules should not operate this lawn mower.
Safety Label Locations
These labels warn you of potential hazards that can cause serious injury. Read them carefully. If a label comes off or becomes hard to read, contact an authorized Honda servicing dealer for a replacement.
Your safety and the safety of others are very important. We have provided important safety messages in this manual and on the mower.
This information alerts you to potential hazards that could hurt you or others. Please read these messages carefully.
Of course, it is not practical or possible to warn you about all the hazards associated with operating or maintaining a lawn mower. You must use your own good judgment.
Safety Instructions
You will find important safety information in a variety of forms:
• Safety Labels – on the lawn mower.
• Instructions – how to use this mower correctly and safely.
• Safety Messages – preceded by a safety alert
symbol and one of three signal words: DANGER, WARNING, or CAUTION.
Each message tells you what the hazard is, what can happen, and what you can do to avoid or reduce injury.
These signal words mean:
DANGER
You WILL be KILLED or
SERIOUSLY HURT if you don't follow instructions.
WARNING
You CAN be KILLED or
SERIOUSLY HURT if you don't follow instructions.
CAUTION
You CAN be HURT if you don't follow instructions.
• Damage Prevention Messages – You will also see other important messages that are preceded by the word NOTICE. This word means:
NOTICE
Your engine or other property can be damaged if you don’t follow instructions.
PARTS AND CONTROLS
HANDLEBAR
REAR
DISCHARGE
GUARD
FUEL TANK CAP
INITIAL MOWER SETUP
List of Parts
With help of an assistant, carefully remove the mower and loose parts from the carton and compare the loose parts against the following list.
Contact the authorized Honda dealer from whom you purchased the mower if any of the loose parts shown are not included with the mower.
Ref. No.
Description
Grass bag frame
Grass bag
Engine oil and owner’s manual
Qty.
1
1
1
RECOIL
STARTER
GRIP
HANDLEBAR
ADJUST
KNOB (2)
OIL FILLER CAP
BLADE
CONTROL
BUTTON
BLADE
CONTROL
LEVER
(P. 8)
MUFFLER
CUTTING HEIGHT
ADJUSTMENT
LEVER (4)
DRIVE
CLUTCH
LEVER
(P. 8)
Adjust the Handlebar
1. With the handlebar adjust knobs in the unlocked position, raise the handlebar into the mowing position.
GRASS BAG
CLIP DIRECTOR®
KNOB
(P. 5)
SPARK PLUG
CARBURETOR
AIR FILTER
FUEL VALVE ON FUEL VALVE OFF
HANDLEBAR ADJUST
KNOBS
UNLOCKED
LOCKED
2. Align the adjust knobs with one of the three holes on each handle stay. Setting the adjust knobs in the lowest holes raises the handlebar to its highest position.
3. Turn the handlebar adjust knobs 90 degrees into the lock position, making sure both sides are positioned at the same height.
4. Remove all the cardboard from around the handlebar.
3
4
Add Engine Oil
The mower is shipped WITHOUT
OIL in the engine. Remove the oil filler cap/dipstick and add the entire contents of the included bottle of oil into the oil filler opening.
Before Using Your Lawn Mower
All mower operators must read the following sections:
)
• BEFORE EACH OPERATION ( page 4
)
• MAINTENANCE SCHEDULE (
)
All Honda engines are run at the factory prior to packaging. Most of the oil is removed prior to shipment; however, some oil remains in the engine. The amount of oil left in the engine varies.
If you don’t use the supplied oil, add enough SAE 10W-30 API service category SJ or later oil to bring the oil level between the upper and lower limit marks on the dipstick—without screwing the dipstick in
(approximately 12 to 13.5 ounces is required). See
.
Do not overfill the engine with oil. If the engine is overfilled, the excess oil may get transferred to the air cleaner housing and air filter.
An indication of overfilling is white or blue smoke coming from the muffler when the engine is running.
After filling the engine with oil, screw the filler/cap dipstick in and remove the hang tag near the recoil starter grip that says “The engine
has no oil.”
BEFORE EACH OPERATION
Your safety is your responsibility. A little time spent in preparation will significantly reduce your risk of injury.
Read and understand this manual. Know what the controls do and how to operate them.
Familiarize yourself with the lawn mower and its operation before you begin using it. Know how to quickly shut off the lawn mower in case of an emergency.
Check Your Mower
For your safety, and to maximize the service life of your lawn mower, it is very important to take a few moments before you operate the lawn mower to check its condition. Be sure to take care of any problem you find, or have your servicing dealer correct it, before you operate the lawn mower.
Assemble the Grass Bag
1. Turn the grass bag right-side out.
2. Pull the frame support legs outward and slide them into the eyelets as shown.
3. Install the assembled frame into the fabric grass bag, keeping the grass bag handle exposed.
WARNING
Improperly maintaining this lawn mower, or failing to correct a problem before operation, could cause a malfunction in which you could be seriously injured.
Always perform a pre-operation inspection before each operation, and correct any problem.
GRASS BAG HANDLE
FABRIC GRASS BAG
EYELETS
SUPPORT LEGS
TOP PLASTIC CLIP
(Route under the handle and frame)
PLASTIC CLIP
Please Register Your Mower
Please take a few minutes and register your purchase with Honda.
You can register by completing and mailing the registration card on the back cover of this book or going online to www.powerequipment.honda.com
and clicking on Product
Registration.
• Make sure the lawn mower is on a level surface.
• Look around and underneath the lawn mower for signs of oil or gasoline leaks.
• Look for signs of damage.
• Check each control for proper operation.
• Check the blades for wear. Replace as necessary (
• Check that the blade bolts are tight ( page 11
).
• Check that all nuts, bolts, and screws are tightened.
• Check the air filter (
).
• Check the fuel level (
). Starting with a full tank will help to eliminate or reduce operating interruptions for refueling.
Check Your Mowing Area
For your safety and the safety of others, always inspect the area before operating the lawn mower.
Anything that can be picked up by the blades and thrown is a potential hazard to you and others. Look for things like stones, sticks, nails, and wire, and remove them from the lawn area.
People and animals near the lawn area can move into your lawn mower’s path or into a position where they could be struck by thrown objects. Clear the area of pets and people, especially children. Their safety is your responsibility.
Check the condition of the grass. Adjust your lawn mower ground speed and mowing swath accordingly.
Clip Director
®
The Clip Director can be adjusted to any one of the ten positions to achieve the desired mowing results (bag, bag and mulch, or mulch).
To adjust the Clip Director knob, pull the knob downward and towards the rear of the mower. The knob adjusts a sliding door from the fully open BAG position to the fully closed MULCH position.
Some grass accumulation in the discharge opening is normal when the Clip Director is fully closed in the MULCH position. To remove this grass, close the discharge guard, fully open the Clip Director in the
BAG position, engage the blade control lever, and start the engine.
If a high resistance is noticed when moving the Clip Director knob from side-to-side, excessive grass may have built up on top of the sliding door.
Rear Discharge
FULL BAGGING OR
REAR DISCHARGE
KNOB (BAG POSITION)
CLIP DIRECTOR KNOB
SLIDING DOOR
(fully open)
FULL MULCHING
KNOB (MULCH POSITION)
SLIDING DOOR
(fully closed)
To discharge clippings to the rear, remove the grass bag and position the Clip Director knob in the BAG range. Maximum rear discharge will occur when the Clip Director knob is all the way to the left (BAG) position. As the Clip Director knob is moved toward the right (MULCH) position, less grass will be discharged through the rear discharge guard.
SLIDING DOOR
(fully closed)
DISCHARGE
GUARD
Important Safety Precaution
Always stop the engine and disconnect the spark plug cap ( page 13 )
before lifting the discharge guard to view or clean around the sliding door. This will prevent contact with the rotating blades and prevent objects from being thrown into the discharge area.
Sliding Door Position
The sliding door can be positioned to produce different mowing results. If the preferred sliding door position is unknown, install the grass bag and begin mowing with the Clip Director knob all the way to the BAG position. Check the appearance of the lawn. As the knob is moved towards the MULCH position, more grass will be recycled back into the lawn. Adjust the Clip Director knob until the desired result is achieved.
CLIP DIRECTOR KNOB
BAGGING OR REAR DISCHARGE
AND SOME MULCHING
Fallen Leaves
Use the Clip Director to shred and collect fallen leaves for disposal.
Set the front wheels so they are one or two settings higher than the rear. Set the Clip Director in position #9 (not quite full mulching), and adjust the setting from this point for best results.
Rear Shield
During normal use the rear shield is subject to deterioration and wear.
Remove the grass bag and raise the discharge guard to check the rear shield for cracks or tears. If the rear shield is excessively worn, have it replaced by your authorized Honda servicing dealer.
DISCHARGE GUARD
SLIDING DOOR
(50% open)
REAR SHIELD
5
6
Grass Bag
A lawn mower works like a vacuum cleaner; it blows air through the bag fabric, which traps the grass clippings. Always empty the grass bag before it becomes filled to the limit of its capacity. Bagging performance will diminish after the bag becomes about 90% filled.
Also, the bag is easier to empty when it is not packed full.
You can leave the grass bag on the mower during mowing, even when full mulching is selected.
To minimize dust and fine particles from passing through the grass bag fabric, it is best to mow grass in the morning when the grass is damp.
Inspection
During use, the grass bag material is subject to normal wear and tear.
To adjust cutting height, pull each adjustment lever toward the wheel, and move it into another notch.
Move all four adjustment levers to the same position, forward for tall grass and rearward for short grass.
ADJUSTMENT LEVERS
CAUTION
An excessively worn grass bag may allow objects to be thrown toward the operator.
Replace a worn grass bag to prevent possible injury.
Grass bag replacement is explained on
Installation
DISCHARGE GUARD
1. Raise the discharge guard and hook the grass bag onto the mower deck as shown.
Clean any grass clippings from the hook channel.
2. Lower the discharge guard to secure the grass bag.
GRASS BAG
HANDLE
BAG
Removal
HOOK
CHANNEL
1. Raise the discharge guard, grasp the grass bag handle, and remove the grass bag.
2. Release the discharge guard.
3. When the grass bag is clear of the discharge guard, you can lift it through the handlebar opening or remove it to the rear of the mower below the handlebar.
Cutting Height Adjustment
Each wheel of the mower can be adjusted to one of seven settings.
The actual height of cut grass will vary with lawn and soil conditions.
Be sure the engine is not running when adjusting the cutting height.
THE CUTTING HEIGHT FIGURES ARE APPROXIMATE
3/4 in (20 mm)
1-1/4 in (32 mm)
2 in (46 mm)
2-1/2 in (62 mm)
3 in (75 mm)
3-1/2 in (88 mm)
4 in (100 mm)
FORWARD
DIRECTION
1
•
2
•
•
3
4
If you are not sure what cutting height to select, start with a high setting and check the appearance of the lawn after mowing a small area. Then readjust the cutting height if necessary.
Check the Oil Level
1. Unscrew and remove the filler cap/dipstick and wipe it clean.
2. Insert and remove the dipstick without
screwing it into the
filler neck. Check the oil level shown on the dipstick.
3. If the oil level is low, add oil to reach the upper limit mark on the dipstick.
Do not overfill. If the engine is overfilled, the excess oil may get transferred to the air cleaner housing and air filter. An indication of overfilling is white or blue smoke coming from the muffler when the engine is running.
Use 10W-30 API Service category SJ oil for normal conditions. For additional oil recommendations, see
.
FILLER CAP
/DIPSTICK
UPPER
LIMIT
LOWER
LIMIT
NOTICE
Running the engine with a low oil level can cause engine damage.
4. Screw in the filler cap/dipstick securely.
Add Fuel
This engine is certified to operate on regular gasoline with a pump octane rating of 86 or higher.
OPERATION
Never use stale or contaminated gasoline or an oil/gasoline mixture.
Avoid getting dirt or water in the fuel tank.
You may use regular unleaded gasoline containing no more than 10% ethanol (E10) or 5% methanol by volume. In addition, methanol must contain cosolvents and corrosion inhibitors.
For your safety, avoid starting or operating the engine in an enclosed area, such as a garage. Your mower’s exhaust contains poisonous carbon monoxide gas, which can collect rapidly in an enclosed area and cause illness or death.
Use of fuels with content of ethanol or methanol greater than shown above may cause starting and/or performance problems. It may also damage metal, rubber, and plastic parts of the fuel system.
Engine damage or performance problems that result form using a fuel with percentages of ethanol or methanol greater than shown above are not covered under warranty.
WARNING
Exhaust contains poisonous carbon monoxide gas that can build up to dangerous levels in closed areas. Breathing carbon monoxide can cause unconsciousness or death.
Never run the lawn mower in a closed, or even partially closed area where people may be present.
You might hear a clicking noise as you push or pull the lawn mower without engaging the drive clutch. This is normal; moving the mower without using the drive clutch lever will not damage the mower.
WARNING
Gasoline is highly flammable and explosive, and you can be burned or seriously injured when refueling.
• Stop the engine and keep heat, sparks, and flame away.
• Refuel only outdoors.
• Wipe up spills immediately.
If your equipment will be used on an infrequent or intermittent basis,
(more than 4 weeks before next use), refer to “FUEL SYSTEM
MAINTENANCE” on page 18 for information regarding fuel
deterioration.
1. Remove the fuel tank cap.
2. Add fuel to the bottom of the red fuel level gauge in the neck of the fuel tank. Do not overfill. Wipe up spilled fuel before starting the engine.
Safe Mowing Practices
Most injuries and property damage with walk-behind mowers can be prevented if you follow all instructions in this manual and on the mower. The most common hazards are discussed below, along with the best way to protect yourself and others.
Avoid Rotating Blades
Rotating blades can cause serious cuts and even amputate fingers, hands, toes, or feet. Keep away from the mower deck whenever the engine is running. If you need to adjust the cutting height or work around the deck for any other reason, always shut off the engine.
Wear heavy gloves and disconnect the spark plug cap when you need to clean the mower deck or handle the blades.
RED FUEL
LEVEL
GAUGE
MAXIMUM
FUEL LEVEL
WARNING
The blades are sharp and spin at high speed. A spinning blade can cut you severely and can amputate fingers and toes.
• Wear protective footwear.
• Keep your hands and feet away from the mower deck while the engine is running.
• Stop the engine before performing any adjustment, inspection, or maintenance.
3. Tighten the fuel tank cap until it clicks.
Move the mower at least 10 feet (3 meters) away from the fueling source and site before starting the engine.
Clear Mowing Area
Mower blades can throw rocks and other objects with enough force to cause serious injury. Before mowing, carefully inspect the area and remove all sticks, stones, pieces of wire, and other loose objects.
Never operate the blades over gravel.
NOTICE
Fuel can damage paint and plastic. Be careful not to spill fuel when filling your fuel tank. Damage caused by spilled fuel is not
covered by the DISTRIBUTOR’S LIMITED WARRANTY
(
).
NOTICE
Striking objects with the spinning blades can cause severe engine
damage, which is not covered by the Distributor’s Limited Warranty.
Keep Shields In Place
Guards and shields are designed to protect you from being hit by thrown objects and from hot engine parts and moving components.
For your safety and the safety of others, keep all shields in place when the engine is running.
7
8
Refuel With Care
Gasoline is extremely flammable and gasoline vapor can explode.
Refuel only outdoors, in a well-ventilated area, with the engine OFF.
Never smoke near gasoline, and keep other flames and sparks away.
Always store gasoline in an approved container.
Wear Protective Clothing
Wearing protective clothing will reduce your risk of injury. Long pants and eye protection reduce the risk of injuries from thrown objects.
Sturdy shoes with aggressive soles will help protect your feet and give you better traction on slopes or uneven ground.
Stop the Engine When Not Mowing
If you need to leave the mower for any reason, even just to inspect the lawn ahead, always release the blade control lever.
Avoid Slopes
Avoid steep slopes of more than 20
°
.
Mow across slopes, not up and down. Be careful when changing direction. Mowing on a slope when the grass is damp or wet could cause you to slip, fall, and lose control of the mower.
NOTICE
Mowing on steep slopes can starve the engine of oil, causing engine damage that is not covered by the Distributor’s Limited
Warranty.
Keep all four wheels on the ground, and be careful to avoid losing your footing and your control of the mower. Keep a firm grip on the handlebar, and walk, never run, with the mower. Be very careful when mowing uneven or rough ground.
If stuck, do not kick or shove the mower with your foot. Use the handlebar to control the mower.
Avoid Obstacles
Gravel, loose stones, and landscaping material can be picked up by the mower and thrown many feet with enough force to cause serious personal injury and/or property damage. The best way to prevent potential injury from thrown objects is to release the blade control lever to stop the blades before reaching areas with gravel, loose stones, or landscaping material.
Be careful when mowing over obstacles that stick up above the surface of the lawn such as sprinkler heads, paving, edging, raised tree roots, etc.
If the blade hits something, or if the mower starts to vibrate, stop the engine immediately, disconnect the spark plug cap, and check for damage (
). Striking objects may damage the blades, bend the crankshaft, and/or break the mower deck or other components.
Vibration usually indicates serious trouble.
WARNING
A worn, cracked, or damaged blade can break, and pieces of the damaged blade can become dangerous projectiles.
Thrown objects can cause serious injury.
Inspect the blades regularly (see page 11 ), and do not operate
the mower with a worn or damaged blade.
The DISTRIBUTOR’S LIMITED WARRANTY (
) does not cover parts damaged by accidental impact collision.
Operating the Controls
Throttle Lever
For best cut quality, always mow with the throttle lever in the FAST position. When the blades rotate at the preset fast speed, they create a strong fan action that lifts and cuts grass more efficiently.
Do not try to increase the preset engine speed; the blades could fracture and come apart.
THROTTLE
LEVER
FAST
STOP
OP
ST
Blade Control Lever
To start blade rotation, hold down the yellow button on top of the blade control lever, and then push the lever forward quickly and hold it against the handlebar.
Release the yellow button.
BLADE CONTROL LEVER
Operate the blade control lever with a quick and complete motion so that the blade control is always either fully
BUTTON
engaged or released. This will help to prevent stalling the engine, and it will also extend the service life of the blade control mechanism.
To stop blade rotation, release the blade control lever. The engine will continue to run. Always release the blade control lever before starting the engine to prevent the blades from turning.
Drive Clutch Lever
Push the drive clutch lever forward to propel the mower.
BLADE CONTROL LEVER
Release the drive clutch lever to stop the mower’s forward movement.
You can control the self-propelled speed with the drive clutch
DRIVE CLUTCH LEVER
lever. The mower will move gradually faster as you push the drive clutch lever forward. If you push the lever all the way forward to the handlebar, the mower
will move at the speed determined by the shift lever setting ( page 9 ).
When moving and using the drive clutch lever to change the self-propelled speed, continue to fully hold the blade control lever against the handlebar. This will help prevent damage to the blade control mechanism. Use the shift lever (
) to change the maximum speed so you can hold the drive clutch lever comfortably against the handlebar.
For self-propelled mowing, press the button on top of the blade control lever, push the blade control lever completely forward, and then push the drive clutch lever forward. The drive clutch lever will hold the blade control lever against the handlebar.
Always release the drive clutch lever before starting the engine. If the drive clutch is engaged, the mower will move forward when you operate the starter.
Shift Lever
SHIFT
LEVER
Use the shift lever to select the forward speed at which you wish to mow.
Do not use the throttle lever to adjust your forward speed. The throttle lever must remain in the
FAST position for good mowing performance.
THROTTLE
SLOW
FAST
The position of the shift lever determines the maximum ground speed when the drive clutch lever is fully engaged.
For maximum mowing performance, use the lower speed range for mowing and the higher speed range for transporting.
With the shift lever all the way back and the drive clutch lever engaged, the mower will move slowly or not at all.
Starting the Engine
Before starting, always release the drive clutch lever so that the mower will not move forward when you operate the starter.
1. Turn the fuel valve to the ON position (
2. Move the throttle lever to the FAST position.
OP
ST
3. Pull the starter grip lightly until you feel resistance, then pull
FAST
briskly. Return the starter grip gently.
THROTTLE
LEVER
To ensure easy restarting and maximum performance from the Auto Choke System™, allow the engine to run for at least three minutes after starting a cold engine before stopping the engine. The minimum run time will need to be longer if the temperature is below 70°F (21°C).
SERVICING YOUR MOWER
Proper maintenance is essential for safe, economical, and trouble-free operation. It also helps reduce air pollution.
WARNING
Improper maintenance, or failure to correct a problem before operation, can cause a malfunction in which you can be seriously hurt or killed.
Always follow the inspection and maintenance recommendations and schedules in this owner’s manual.
To help you properly care for your mower, the following pages include a maintenance schedule, routine inspection procedures, and simple maintenance procedures using basic hand tools. Other service tasks that are more difficult or require special tools are best handled by professionals and are normally performed by a Honda technician or other qualified mechanic.
The maintenance schedule applies to normal operating conditions. If you operate your mower under severe conditions, such as sustained high load, high temperature, or unusually wet or dusty conditions, consult your servicing dealer for recommendations applicable to your individual needs and use.
Remember that an authorized Honda servicing dealer knows your mower best and is fully equipped to maintain and repair it. To ensure the best quality and reliability, use only new, Honda Genuine parts or their equivalents for repair and replacement.
Maintenance, replacement, or repair of the emission control devices and systems may be performed by any engine repair establishment or individual, using parts that are “certified” to
EPA standards.
Maintenance Safety
Some of the most important safety precautions follow. However, we cannot warn you of every conceivable hazard that can arise in performing maintenance. Only you can decide whether or not you should perform a given task.
Stopping the Engine
1. Release the drive clutch and blade control levers.
2. Move the throttle lever to the STOP position.
3. When you finish mowing, turn the fuel valve OFF.
4. If your mower will not be used for 3 to 4 weeks, we recommend running the engine’s carburetor out of fuel. You can do this by leaving the fuel valve OFF, restarting the engine and running it
until it stops. See “FUEL SYSTEM MAINTENANCE” on page 18
if you don’t plan to use your mower for a month or more.
5. Clean your mower after each mowing; refer to “Cleaning” on page 14 .
WARNING
Failure to properly follow maintenance instructions and precautions can cause you to be seriously hurt or killed.
Always follow the procedures and precautions in this manual.
9
Safety Precautions
• Make sure the engine is off before you begin any maintenance or repairs. This will eliminate several potential hazards:
– Carbon monoxide poisoning from engine exhaust.
Be sure there is adequate ventilation whenever you operate the engine.
– Burns from hot parts.
Let the engine and exhaust system cool before touching.
– Injury from moving parts.
Do not run the engine unless instructed to do so.
• Read the instructions before you begin, and make sure you have the tools and skills required.
• To reduce the possibility of fire or explosion, be careful when working around gasoline. Use only a nonflammable solvent, not gasoline, to clean parts. Keep cigarettes, sparks, and flames away from all fuel-related parts.
Maintenance Schedule
Rear shield
Blades
Item
Blade mounting bolts
Engine oil
Air filter
Grass bag
Blade control operation
Spark plug
Action
Check
Inspect
Inspect
Check
Change
Check
Clean
Replace
Check
Check
Check
Replace
Clean
Before each use
O
O
O
O
O
O
O
5 hours of use or first month
O
First
25 hours of use
O
O
O
(1)
(4)
(4)
50 hours of use or every
6 months
O
O
(2)
(1)
100 hours of use or every year
O
O
O
O
O
O
O
O
O
O
O
O
(1)
(3)
(4)
(4)
(4)
(3)
(3)
(3)
150 hours of use or every two years
See page
O
O
O
O (3)
8
Spark arrester (optional part)
Fuel tank/filter
Blade control cable
Drive clutch cable
Throttle cable
Idle speed
Valve clearance
Pinion gears
Rear wheel adjuster bushings
Fuel lines
Clean
Adjust
Adjust
Adjust
Adjust
Checkadjust
Grease
Inspectgrease
Check
—
—
Check every 2 years and replace if necessary
(3) —
(1) Service more frequently when used in dusty areas.
(2) Change engine oil every 25 hours when used under heavy load or in high outside air temperatures.
(3) These items should be serviced by an authorized Honda servicing dealer unless you have the proper tools and are mechanically
for ordering information.
(4) See FAQ section at www.PowerEquipment.Honda.com for information.
Failure to follow this maintenance schedule could result in non-warrantable failures.
—
—
—
—
—
—
10
Blade Inspection
1. Turn the fuel valve OFF ( page 3 ).
2. Disconnect the spark plug cap from the spark plug (
).
3. Tilt the mower to the right side so that the fuel cap side is up. This will help to prevent fuel leakage and hard starting due to carburetor flooding.
4. Inspect the blades for damage, cracks, and excessive rust or corrosion.
Blade Replacement
1. Remove the two blade bolts with a 14 mm (6 point) socket wrench. Use a wooden block to prevent the blades from turning when removing the bolts. Remove the blades
UPPER BLADE
LOWER
BLADE
BLADE
BOLT (2)
BLADE BOLTS
BLADES
WARNING
A worn, cracked, or damaged blade can break, and pieces of the damaged blade can become dangerous projectiles.
Thrown objects can cause serious injury.
Inspect the blades regularly, and do not operate the mower with worn or damaged blades.
A dull blade can be sharpened, but a blade that is excessively worn, bent, cracked, or otherwise damaged must be replaced.
NORMAL
TRAILING EDGE
SPECIAL
WASHER (2)
2. Clean dirt and grass from around the blade mounting area.
3. Install the sharpened or replacement blades using the two blade bolts and special washers as shown. Be sure to install the special washers as shown below.
WARNING
Operating the mower with only one blade will result in an improperly seated blade that can be thrown from the mower and seriously hurt or kill someone.
Always install both blades as a set.
The blade bolts and washers are specially designed for this application. When replacing bolts and washers, use only Honda
Genuine replacement parts.
UPPER BLADE
EXCESSIVELY WORN
TRAILING EDGE
NORMAL WORN BENT CRACKED
If a blade is bent, take the lawn mower to an authorized Honda servicing dealer for inspection.
Blade Mounting Bolt Inspection
Inspect the blade bolts for any signs of damage or looseness. If they are damaged, they must be replaced.
If they appear loose, a torque wrench must be used to accurately tighten the blade bolts to the required torque. If you do not have a torque wrench, take your lawn mower to an authorized dealer to have the bolts replaced or tightened.
Use only Honda Genuine blade bolts and special washers, since they are specifically designed for this purpose. Replacement part
INSPECT WASHERS
AND BOLT HEADS
FOR LOOSENESS
LOWER BLADE
BLADE BOLT [2]
AND WASHER [2]
SPECIAL WASHER
DIRECTION
4. Tighten the blade bolts with a torque wrench to the specified torque. Use a wooden block to prevent the blades from turning when tightening the bolts, as shown on
.
Blade bolt torque: 36 ~ 43 ft-lb (49 ~ 59 N·m)
If you do not have a torque wrench, have an authorized Honda servicing dealer tighten the blade bolts.
WARNING
If the blade bolts are not torqued properly, the blades could loosen and be thrown from the mower and seriously hurt or kill someone.
Ensure the blade bolts are torqued properly.
11
BLADES
TORQUE
WRENCH
TORQUE:
36 ~ 43 ft-lb
(49 ~ 59 N•m)
Oil Change
WOODEN
BLOCK
Change the oil after the first month or 5 hours of use. Thereafter, change the oil every 6 months or 50 hours of use. Change the oil more frequently when used under heavy load or high outdoor
temperatures. See “Engine Oil Recommendations” on this page for
recommended oil properties.
Drain the used oil while the engine is warm. Warm oil drains quickly and completely.
To reduce the chance of scratching the side of the mower deck or wheels when tipping, place a piece of cardboard or drop cloth on the ground. The use of a commercially available siphon pump will save time and make the oil change easier.
1. Turn the fuel valve OFF (
page 3 ). This will reduce the possibility
of fuel leakage.
2. Wipe the oil filler area clean, and then remove the oil filler cap/dipstick.
3. Place a suitable container next to the mower to catch the used oil, and then tilt the mower on its right side.
The used oil will drain through the filler neck.
Allow the oil to drain completely.
After draining, take the oil to your local recycling center or service station.
Do not throw it in the trash, pour it on the ground, or pour it down a drain.
4. Fill with the recommended oil.
Do not overfill. Allow a couple of minutes for the oil to settle in the engine, and then measure the oil level (
).
Refill amount:
12.0 ~ 13.5 oz.
(0.35 ~ 0.40 L)
NOTICE
Using nondetergent oil can shorten the engine’s service life, and using 2-stroke oil can damage the engine.
Engine Oil Recommendations
Oil is a major factor affecting performance and service life. Use
4-stroke automotive detergent oil. Always change the oil in
accordance with the MAINTENANCE SCHEDULE ( page 10 ).
Recommended oil for general use: SAE 10W-30
Other viscosities shown in the chart may be used when the average temperature in your area is within the recommended range.
30
10W-30
The SAE oil viscosity and service classification are in the API label on the oil container. Honda recommends
API service category SJ or later oil.
0 20 40 60 80 100°F
-20 -10 0 10 20 30 40°C
OUTSIDE AIR TEMPERATURE
Air Filter
Clean the air filter after the first 25 hours of use. Thereafter, clean the filter every 6 months or 50 hours of use. Clean the filter more often when used in dusty areas. Replace the filter every 2 years or 150 hours of use.
A properly maintained air filter will help prevent dirt from entering your engine. Dirt entering the carburetor can be drawn into small passages in the carburetor and cause premature engine wear. These small passages can become blocked, causing starting or running problems.
NOTICE
Operating the engine without an air filter, with a damaged air filter, or with an improperly installed air filter cover will allow dirt to enter the engine, causing rapid engine wear. This type of damage is not
covered by the DISTRIBUTOR’S LIMITED WARRANTY ( page 20
We recommend the use of a Honda Genuine air filter to ensure it seals and performs as designed. Using a non-Honda air filter can result in dirt bypassing the filter, causing damage to the engine or fuel system.
1. Press down on the cover tabs and remove the cover.
2. Remove the filter from the air cleaner housing.
AIR CLEANER
HOUSING
FILTER
COVER
TABS
COVER
3. Inspect the filter; replace if damaged.
4. Clean the filter by tapping it several times on a hard surface to remove dirt, or blow compressed air (not exceeding 30 psi
[207 kPa]) through the air filter from the inside. Never try to brush off dirt; brushing will force dirt into the fibers.
5. Wipe dirt from the inside of the air cleaner housing and cover using a moist rag. Be careful to prevent dirt from entering the air duct that leads to the carburetor.
6. Reinstall the filter and cover. Be sure both tabs are fully locked in place.
12
Spark Plug
Replace the spark plug every 2 years or after 150 hours of use.
Recommended Spark Plug: NGK - BPR5ES
NOTICE
An incorrect spark plug can cause engine damage.
For good performance, the spark plug must be properly gapped and free of deposits.
1. Allow the engine to cool, disconnect the spark plug cap, and remove any dirt from around the spark plug area.
2. Remove the spark plug with a 13/16 in (21 mm) spark plug wrench.
3. Inspect the spark plug.
Replace it if the electrodes are worn, or if the insulator is cracked or chipped.
4. Measure the spark plug electrode gap with a suitable gauge.
Gap: 0.028 ~ 0.031 in
(0.7 ~ 0.8 mm).
SPARK
PLUG
CAP
SPARK PLUG
0.028 ~ 0.031 in
(0.7 ~ 0.8 mm)
Correct the gap, if necessary, by carefully bending the side electrode.
5. Install the spark plug carefully, by hand, to avoid cross-threading.
SEALING
WASHER
6. After the spark plug seats, tighten with a
13/16 in (21 mm) spark plug wrench to compress the washer.
If reinstalling the old spark plug, tighten 1/8 to 1/4 turn after the spark plug seats.
If installing a new spark plug, tighten 1/2 turn after the spark plug seats.
Spark plug torque: 14 ft-lb (20 N·m)
NOTICE
A loose spark plug can overheat and damage the engine.
Overtightening the spark plug can damage the threads in the cylinder head.
7. Install the spark plug cap on the spark plug.
Spark Arrester (optional part)
The spark arrester must be serviced every 100 hours to keep it functioning as designed.
Your lawn mower engine is not factory-equipped with a spark arrester.
In some areas, it is illegal to operate an engine without a spark arrester. Check local laws and regulations. An optional USDA approved spark arrester is available from an authorized Honda servicing dealer. See
1. Allow the engine to cool and disconnect the spark plug cap.
2. Remove the three flange bolts and the heat shield. Remove the setscrew and the spark arrester from the muffler.
3. Check for carbon deposits on the spark arrester and the exhaust port. Use a brush to remove any carbon deposits from the screen. Replace the screen if it is torn or damaged.
4. Installation is the reverse of removal. Tighten all hardware securely.
5. Reconnect the spark plug cap.
SPARK ARRESTER
FLANGE BOLT (3) HEAT SHIELD
SETSCREW
13
Cleaning
TRANSPORTING
If the engine has been running, allow it to cool before loading the mower on the transport vehicle. A hot engine and exhaust system can burn you and can ignite some materials.
Turn the fuel valve to the OFF position. This will prevent carburetor flooding and reduce the possibility of fuel leakage.
If installed, remove the grass bag.
If a suitable loading ramp is not available, two people should lift the mower on and off the transport vehicle while holding the mower level.
Position the mower so all four wheels are on the bed of the transport vehicle. Tie the mower down with rope or straps, and block the wheels. Keep the tie-down rope or straps away from the controls, adjustment levers, cables, and the carburetor.
Fold the handlebar so the mower will take up less space (
STORAGE
Mower Deck
Before washing the underside of the mower deck, stop the engine and turn the fuel valve to the OFF position. Rest the mower on its right side so that the fuel cap side is up. This will help to prevent fuel leakage and hard starting due to carburetor flooding. Wear heavy gloves to protect your hands from the blades.
Be careful to avoid getting water into controls and cables.
Engine
Wash the engine by hand, and be careful to prevent water from entering the air cleaner and exhaust opening.
NOTICE
Using a garden hose or pressure washing equipment can force water into the air cleaner. Water in the air cleaner will soak the paper filter and can enter the carburetor or engine cylinder, causing damage.
Water contacting a hot engine can cause damage. If the engine has been running, allow it to cool before washing.
Proper storage preparation is essential for keeping your lawn mower trouble free and looking good. To help keep rust and corrosion from impairing your lawn mower’s function and appearance, and to make the engine easier to start after storage, follow the instructions described in this section to:
• Drain or treat the fuel
• Change the oil and coat the engine cylinder
• Clean the mower, engine, and grass bag
• Choose a storage location
Grass Bag
Remove the bag from the mower, and wash it with a garden hose or pressure washer. Allow the bag to dry completely before storage.
Drying
After washing the lawn mower, wipe dry all accessible surfaces.
Place the mower with its wheels on a level surface. Start the engine outdoors and let it run until it reaches normal operating temperature to evaporate any water remaining on the engine.
Stop the engine and allow it to cool.
After the lawn mower is clean and dry, touch up any damaged paint, and coat other areas that may rust with a light film of oil.
Fuel
See “FUEL SYSTEM MAINTENANCE” on
recommended procedures to avoid fuel related problems.
The DISTRIBUTOR’S LIMITED WARRANTY ( page 20 ) does not
cover fuel system damage or engine performance problems resulting from neglected storage preparation.
Oil
Change the engine oil (see page 12 ).
Add oil in the engine cylinder to prevent rust.
1. Remove the spark plug (
2. Pour a teaspoon (5 cc) of clean engine oil into the cylinder to keep it from rusting.
3. Pull the starter rope several times to distribute the oil in the cylinder.
4. Reinstall the spark plug.
5. Pull the starter rope slowly until resistance is felt, and then return the starter grip gently.
This will close the valves so moisture cannot enter the engine cylinder.
Storage Location
If your mower will be stored with gasoline in the fuel tank and carburetor, it is important to reduce the hazard of gasoline vapor ignition. Select a well-ventilated dry storage area away from any appliance that operates with a flame, such as a furnace, water heater, or clothes dryer. Also avoid any area with a spark-producing electric motor, or where power tools are operated.
Make sure the fuel valve is in the OFF position to reduce the possibility of fuel leakage.
Place the mower with its wheels on a level surface. Tilting can cause fuel or oil leakage.
With the engine and exhaust system cool, cover the mower to keep out dust. A hot engine and exhaust system can ignite or melt some materials. Do not use sheet plastic as a dust cover. A nonporous cover will trap moisture around the mower, promoting rust and corrosion.
14
Handlebar
.
Remove the grass bag if installed. You can place it on top of the engine with the bag opening to the front.
1. Turn the handlebar adjust knobs 90 degrees to release the locating pins.
2. Fold the handlebar forward; do not pinch or kink the cables.
Removing From Storage
When unfolding the handlebar, be sure to lock the handlebar adjust knobs to secure the handlebar in the mowing position.
Check your mower as described in BEFORE OPERATION ( page 4 ).
If the cylinder was coated with oil during storage preparation, the engine may smoke briefly at startup.
Loss of Power
Possible Cause Correction
Throttle not set to FAST
Grass is too tall
Mower deck is clogged
Air filter is clogged
Move the throttle lever to the FAST
)
Raise the cutting height (
a narrower swath, use a slower ground speed, or cut more frequently.
Instead of mulching, try rear discharging or bagging.
Clean out the mower deck ( page 14
).
Clean or replace the air filter
(
Bad fuel; mower stored without treating gasoline, or refueled with bad gasoline
Refuel with fresh gasoline ( page 7
).
Fuel filter clogged, carburetor malfunction, ignition malfunction, valves stuck, etc.
Take the mower to an authorized
Honda servicing dealer for repair.
Vibration
Possible Cause
Grass and debris lodged under the mower deck
Blades loose
Correction
Clean out the mower deck (
Tighten loose blade bolts ( page 11
).
TROUBLESHOOTING
Blades bent, damaged, or unbalanced by improper sharpening
Mechanical damage, such as a bent crankshaft
Take the mower to an authorized
Honda servicing dealer for repair.
Engine Will Not Start
Possible Cause Correction
Throttle lever in wrong position
Fuel valve OFF
Out of fuel
Move the throttle lever to the FAST
Refuel (
Turn the fuel valve ON ( page 9
).
Bad fuel; mower stored without treating gasoline, or refueled with bad gasoline
Refuel with fresh gasoline ( page 7
).
Spark plug faulty, fouled, or improperly gapped
Gap or replace the spark plug
Spark plug wet with fuel
(flooded engine)
Fuel filter clogged, carburetor malfunction, ignition malfunction, valves stuck, etc.
Dry and reinstall the spark plug.
Take the mower to an authorized
Honda servicing dealer for repair.
Mowing and Bagging Problems
Possible Cause Correction
Engine speed is too slow to cut well
Move the throttle lever to the FAST
)
Mower is moving too fast for lawn conditions
Cutting height adjustment levers set at different positions
Grass bag clogged
Shift to a slower speed or apply less pressure to the drive clutch lever.
Set all levers at the same cutting height position (
Wash the grass bag ( page 14 ).
Mower deck is clogged
Blades dull, worn, or damaged
Wrong blades installed
Clean out the mower deck ( page 14
).
Sharpen or replace the blades if
Install correct blades ( page 19 ).
15
Emission Control System
TECHNICAL INFORMATION
Serial Number Locations
ENGINE
SERIAL NUMBER
MODEL NAME AND
FRAME SERIAL NUMBER
Source of Emissions
The combustion process produces carbon monoxide, oxides of nitrogen, and hydrocarbons. Control of hydrocarbons and oxides of nitrogen is very important because, under certain conditions, they react to form photochemical smog when subjected to sunlight. Carbon monoxide does not react in the same way, but it is toxic.
Honda utilizes appropriate air/fuel ratios and other emissions control systems to reduce the emissions of carbon monoxide, oxides of nitrogen, and hydrocarbons. Additionally, Honda fuel systems utilize components and control technologies to reduce evaporative emissions.
U.S. EPA, CARB, and Environment Canada
EPA, California, and Canadian emissions regulations require all manufacturers to furnish written instructions describing the operation and maintenance of emissions control systems.
The following instructions and procedures must be followed in order to keep the emissions from your Honda engine within the emissions standards.
Tampering and Altering
CONFORMS TO ANSI B 71.1-SAFETY STANDARD
HRX2174HYA GH
MAGA –– XXXXXXX
AMERICAN HONDA MOTOR CO., INC.
ALPHARETTA, GA 30005-8847
There are two serial numbers, one for the engine and one for the mower frame. Record the engine and frame serial numbers in the space below. You will need these serial numbers when ordering parts and when making technical or warranty inquiries.
Engine serial number: _________________________________
Frame serial number: __________________________________
Date of purchase: _____________________________________
High Altitude Operation
At high Altitudes, the standard carburetor air-fuel mixture will be too rich. Performance will decrease, and fuel consumption will increase. A very rich mixture will also foul the spark plug and cause hard starting.
Operation at an Altitude that differs from that at which this engine was certified, for extended periods of time, may increase emissions.
High Altitude performance can be improved by specific modifications to the carburetor. If you always operate your lawn mower at Altitudes above 5,000 feet (1,500 meters), have your servicing dealer perform this carburetor modification. This engine, when operated at high
Altitude with the carburetor modifications for high Altitude use, will meet each emission standard throughout its useful life.
Even with carburetor modification, engine horsepower will decrease about 3.5% for each 1,000-foot (300-meter) increase in Altitude. The effect of Altitude on horsepower will be greater than this if no carburetor modification is made.
NOTICE
When the carburetor has been modified for high Altitude operation, the air-fuel mixture will be too lean for low Altitude use. Operation at
Altitudes below 5,000 feet (1,500 meters) with a modified carburetor may cause the engine to overheat and result in serious engine damage. For use at low Altitudes, have your servicing dealer return the carburetor to original factory specifications.
NOTICE
Tampering is a violation of Federal and California law.
Tampering with or altering the emissions control system may increase emissions beyond the legal limit. Among those acts that constitute tampering are:
• Removal or alteration of any part of the intake, fuel, or exhaust systems.
• Altering or defeating the speed-adjusting mechanism to cause the engine to operate outside its design parameters.
Problems That May Affect Emissions
If you are aware of any of the following symptoms, have your engine inspected and repaired by your servicing dealer.
• Hard starting or stalling after starting
• Rough idle
• Misfiring, backfiring under load, or afterburning
• Black exhaust smoke or high fuel consumption
Replacement Parts
The emissions control systems on your new Honda engine were designed, built, and certified to conform with EPA, California, and
Canadian emissions regulations. We recommend the use of Honda
Genuine parts whenever you have maintenance done. These original-design replacement parts are manufactured to the same standards as the original parts, so you can be confident of their performance. The use of replacement parts that are not of the original design and quality may impair the effectiveness of your emissions control system.
A manufacturer of an aftermarket part assumes the responsibility that the part will not adversely affect emissions performance. The manufacturer or rebuilder of the part must certify that use of the part will not result in a failure of the engine to comply with emissions regulations.
Maintenance
Follow the MAINTENANCE SCHEDULE on page 10 . Remember this
schedule is based on the assumption that your machine will be used for its designed purpose. Sustained high-load or high-temperature operation, or use in unusually wet or dusty conditions, will require more frequent service.
16
Air Index
An Air Index Information hang tag/label is applied to engines certified to an emission durability time period in accordance with the requirements of the California Air Resources Board.
The bar graph is intended to provide you, our customer, the ability to compare the emissions performance of available engines. The lower the Air Index, the less pollution.
The durability description is intended to provide you with information relating the engine’s emission durability period. The descriptive term indicates the useful life period for the engine’s emission control
system. See your EMISSION SYSTEM WARRANTY ( page 21 ) for
additional information.
Descriptive Term
Moderate
Intermediate
Extended
Applicable to Emissions
Durability Period
50 hours (0 ~ 80 cc)
125 hours (greater than 80 cc)
125 hours (0 ~ 80 cc)
250 hours (greater than 80 cc)
300 hours (0 ~ 80 cc)
500 hours (greater than 80 cc)
1000 hours (225 cc and greater)
Specifications
Mower Features
HRX217K4HYA Honda rotary mower, 21-inch mower deck,
Clip Director, hydrostatic transmission, blade brake clutch, Auto Choke System™
Maintenance
Fuel Unleaded gasoline with a pump octane rating of 86 or higher containing no more than 10% ethanol by volume
Capacity: 0.25 US gal (0.93 L)
See “FUEL SYSTEM MAINTENANCE” on page 18
to prevent fuel-related problems
36 ~ 43 ft-lb (49 ~ 59 N•m)
Blade Bolt
Torque
Engine Oil
Spark Plug
SAE 10W-30, API SJ or later
Capacity: 18.6 oz (0.55 L)
Refill amount: 12.0 ~ 13.5 oz
(0.35 ~ 0.40 L)*
Type: NGK - BPR5ES
Gap: 0.028 ~ 0.031 in (0.7 ~ 0.8 mm)
Adjust for proper operation.
1,700 ± 150 rpm
Idle speed
(lever at
SLOW)
Maximum
Governed
Speed
2,950 ~ 3,100 rpm **
Shop manual
Shop manual
Valve clearance
(cold)
Intake: 0.15 ± 0.04 mm
Exhaust: 0.20 ± 0.04 mm
Shop manual
* Actual amount will vary due to residual oil in the engine. Always use the dipstick to confirm the actual level (
).
** Do not try to increase the engine speed above the maximum governed speed; the blades could fracture and come apart.
Dimensions and Weights
Length
Width
Overall height
Dry weight
Cutting width
Cutting heights
71.9 in (1825 mm)
23 in (585 mm)
43.9 in (1115 mm)
96 lb (43.6 kg)
21.0 in (530 mm)
3/4 ~ 4 in (20 ~ 102 mm)
Engine Design and Performance
Model
Type
Displacement
Bore and stroke
Compression ratio
Ignition system
GCV190
4-stroke, overhead-cam, single-cylinder, air-cooled
11.4 cu in (187 cc)
2.71 x 1.97 in (69 x 50 mm)
8.5:1
Transistorized magneto
Transmission Design and Performance
Transmission Type
Mower Ground
Speed
Hydrostatic, fluid-drive, infinitely variable speeds
0 to 3.6 ~ 4.1 mph
(0 to 1.60 ~ 1.85 m/s)
17
FUEL SYSTEM MAINTENANCE
When properly maintained, your Honda lawn mower should provide years of trouble-free operation. This includes the fuel system.
However, gasoline can quickly deteriorate, causing starting or running problems and, in some cases, damage to the fuel system. Most fuel-related problems can be avoided by following the precautions listed below. Fuel system damage and engine performance problems resulting from deteriorated fuel are not covered by the Distributor’s Limited Warranty (see
During the Normal Mowing Season
Action
Do not use gasoline containing more than 10% ethanol.
Store gasoline in a clean, plastic, sealed container approved for fuel storage.
Store your fuel supply container away from direct sunlight; if the container has a vent, keep it closed.
Purchase only enough gasoline to last for 30 to 60 days.
If you purchase enough gasoline to last for more than 60 days, add a fuel stabilizer to your storage tank when you fill it.
When you finish mowing, turn the fuel valve OFF and fill the mower’s fuel tank.
3 to 4 Weeks Before Next Use
Reason
A high level of ethanol in gasoline attracts water, and can corrode or damage the fuel system and cause performance problems.
A clean plastic container will prevent rust and metallic contaminants from entering the fuel system.
Gasoline will deteriorate faster when exposed to air and sunlight.
Gasoline deteriorates with age, so try to avoid storing it for long periods, especially in summer heat.
Fuel stabilizer will extend the shelf life of gasoline, but it will not reconstitute stale fuel.
If the fuel tank is only partially filled, air in the tank will promote fuel deterioration.
Action
Turn the fuel valve OFF and fill the mower’s fuel tank.
With the fuel valve off, start the engine and let it run until it runs out of gas. Running time should be approximately 3 minutes.
Reason
If the fuel tank is only partially filled, air in the tank will promote fuel deterioration.
The small amount of gasoline in your lawn mower’s carburetor will deteriorate faster than the fuel in the fuel tank due to its small volume and heat from the engine.
1 to 3 Months Before Next Use
Action
If you did not add fuel stabilizer to your fuel storage tank when you filled it up, fill your mower’s fuel tank with fresh gasoline.
Add fuel stabilizer to the mower tank according to the stabilizer manufacturer’s instructions.
Run the engine outdoors for 10 minutes.
Stop the engine and turn the fuel valve OFF. Restart the engine and let it run until it runs out of gasoline. Running time should be approximately 3 minutes.
Reason
If the fuel tank is only partially filled, air in the tank will promote fuel deterioration.
Fuel stabilizer will extend the life of gasoline, but it will not reconstitute stale gasoline.
To make sure treated gasoline has replaced untreated gasoline throughout the fuel system.
The small amount of gasoline in your lawn mower’s carburetor will deteriorate faster than the fuel in the fuel tank due to its small volume and heat from the engine.
More Than 3 Months Before Next Use
Action Reason
Start the engine and let it run long enough to empty all the gasoline from the entire fuel system, including the fuel tank. Do not allow gasoline to remain in your lawn mower for more than 3 months of inactivity.
All fuel stabilizers have a shelf life. It is good practice to empty the fuel system for long term inactivity.
If you have fuel left in your storage container at the end of the season, the EPA (Environmental Protection Agency) recommends adding the gasoline to your car’s gas tank (http://epa.gov/reg5oair/mobile/winter.html), provided your car’s gas tank is fairly full.
18
CUSTOMER INFORMATION
Parts, Accessories, and Service Items
Contact an authorized Honda servicing dealer to purchase any of these (or other) Honda Genuine items for your lawn mower.
Replacement Parts
Item
Spark plug
Air filter
Lower blade
Upper blade
Blade bolt
Spring washer
Grass bag
Wheel/tire
Part Number Notes
98079-55846
17211-ZL8-023
72511-VH7-000
72531-VH7-000
NGK (brand) BPR5ES
Paper
Always use an upper and lower blade as a set.
90105-960-710
90502-VG3-000
2 required, 10 x 20 mm
2 required
81320-VH7-D00 Fabric bag only, no frame
42710-VH7-010ZA Rear
44710-VH7-010ZA Front
Accessories
Item
Spark arrester kit
Mower deck guard kit
Lawn mower cover
Part Number Notes
06180-Z0J-000 Includes spark arrester, ID plate, and screw
06761-VH7-000AH Two stainless steel side guards
08P59-VE2-000AH Custom fitted, waterproof, and breathable
Service Items
Item Part Number Notes
SAE 10W-30 engine oil
08207-10W30 1 quart
NO-SPILL gas cans
®
06176-1415-C6
06176-1405-C6
1-1/4 gallon
2-1/2 gallon
Fuel stabilizer 08732-0800
Matte black touch-up paint
(aerosol can)
08707-NH105
® NO-SPILL is a registered trademark of NoSpill LLC.
8 ounces
For short and long term storage
For handlebar only
Dealer Locator Information
To find an Authorized Honda Servicing Dealer anywhere in the United
States:
Visit www.powerequipment.honda.com
and click on Find a Dealer.
How to Contact Honda
Honda Power Equipment dealership personnel are trained professionals. They should be able to answer any question you may have. If you encounter a problem that your dealer does not solve to your satisfaction, please discuss it with the dealership's management.
The Service Manager or General Manager can help. Almost all problems are solved in this way.
If you are dissatisfied with the decision made by the dealership's management, contact the Honda Power Equipment Customer
Relations Office. You can write:
American Honda Motor Co., Inc.
Power Equipment Division
Customer Relations Office
4900 Marconi Drive
Alpharetta, GA 30005-8847
Or telephone: (770) 497-6400 M-F, 8:30 a.m. - 7:00 p.m. ET
When you write or call, please give us this information:
• Model and serial numbers ( page 16 )
• Name of the dealer who sold the lawn mower to you
• Name and address of the dealer who services your lawn mower
• Date of purchase
• Your name, address, and telephone number
• A detailed description of the problem
Honda Publications
These publications will give you information for maintaining and repairing your lawn mower.
Owner’s Manual
Keep this owner’s manual handy so you can refer to it at any time.
Consider this owner’s manual a permanent part of the lawn mower; please give it to the new owner if you resell the lawn mower.
The information and specifications included in this publication were in effect at the time of approval for printing. American Honda Motor Co.,
Inc. reserves the right, however, to discontinue or change specifications or design at any time without notice and without incurring any obligation whatever. No part of this publication may be reproduced without written permission.
Shop Manual
This manual covers complete maintenance and overhaul procedures.
It is intended to be used by a skilled technician. Available through your Honda dealer or visit www.powerequipment.honda.com
and click on Product Support; then click on Shop Manuals.
Parts Catalog
This manual provides complete, illustrated parts lists, and is available through your Honda dealer.
Frequently Asked Questions
The Honda Power Equipment web site provides additional information for users of Honda power equipment. Visit www.powerequipment.honda.com
and click on FAQs.
19
DISTRIBUTOR’S LIMITED WARRANTY
Honda Power Equipment
This warranty is limited to the following Honda Power Equipment products when distributed by American Honda Motor Co., Inc., Power Equipment Division, 4900 Marconi
Drive, Alpharetta, Georgia 30005-8847, purchased at retail or placed in rental service on or after January 1, 2010.
PRODUCTS COVERED
BY THIS WARRANTY
LENGTH OF WARRANTY
(from date of original retail purchase)
PRIVATE
RESIDENTIAL
(1)
COMMERCIAL/
RENTAL/
INSTITUTIONAL
HRX Mowers 60 months 3 months
(1)
Private residential: Used in maintaining owner’s primary and/or secondary residence.
Any other use, including but not limited to informal “for hire” use, is considered commercial/rental/institutional use.
To Qualify for This Warranty:
The product must be purchased in the United States, Puerto Rico, or the U.S. Virgin
Islands from American Honda or a dealer authorized by American Honda to sell those products. This warranty applies to the first retail purchaser and each subsequent owner during the applicable warranty time period.
What American Honda Will Repair or Replace Under Warranty:
American Honda will repair or replace, at its option, any part that is proven to be defective in material or workmanship under normal use during the applicable warranty time period.
Warranty repairs and replacements will be made without charge for parts or labor.
Anything replaced under warranty becomes the property of American Honda Motor Co.,
Inc. All parts replaced under warranty will be considered as part of the original product, and any warranty on those parts will expire coincident with the original product warranty.
To Obtain Warranty Service:
You must, at your expense, take the Honda Power Equipment product, accessory, replacement part, apparel, or the power equipment on which the accessory or replacement part is installed, and proof of purchase to any Honda Power Equipment servicing dealer in the United States, Puerto Rico, or the U.S. Virgin Islands who is authorized to service that product, during the dealer’s normal business hours. To locate a dealer near you, visit our web site at http://www.PowerEquipment.Honda.com and click on
Find a Dealer.
If you are unable to obtain warranty service or are dissatisfied with the warranty service you receive, contact the owner of the dealership involved; normally this will resolve the problem. However, if you should require further assistance, write or call the Power
Equipment Customer Relations Dept. of American Honda Motor Co., Inc. See “How to
Exclusions:
1. Any damage or deterioration resulting from the following:
- Neglect of the periodic maintenance as specified in this manual
- Improper repair or maintenance
- Operating methods other than those indicated in this manual
- The use of non-genuine Honda parts and accessories other than those approved by
Honda (other than recommended lubricants and fluids)
- Exposure of the product to soot and smoke, chemical agents, bird droppings, sea water, sea breeze, salt or other environmental phenomena
- Collision, fuel contamination or deterioration, neglect, unauthorized alteration, misuse, incorporation or use of unsuitable attachments or parts
- Normal wear and tear (normal fading of painted or plated surfaces, sheet peeling and other natural deterioration)
2. Consumable parts: Honda does not warrant parts deterioration due to normal wear and tear. The parts listed below are not covered by warranty (unless they are needed as a part of another warranted repair):
- Spark plug, fuel filter, air cleaner element, clutch disc, tire, wheel bearing, recoil starter rope, cable, belt, cutter blade.
- Lubricant: oil and grease.
3. Cleaning, adjustment, and normal periodic maintenance work (carburetor cleaning, engine oil draining, blade sharpening, belt and cable adjustments).
4. Any product that has ever been declared a total loss or sold for salvage by a financial institution or insurer.
5. Auger and paddle assemblies of snowthrowers, tiller tines of roto-tillers, mower blades and mower deck housings, are specifically not warranted against impact damage, including but not limited to, abrasive damage.
Disclaimer of Consequential Damage and Limitation of Implied
Warranties:
American Honda disclaims any responsibility for loss of time or use of the product, transportation, commercial loss, or any other incidental or consequential damage. Any implied warranties are limited to the duration of this written limited warranty. Some states do not allow limitations on how long an implied warranty lasts and/or do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusions and limitations may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
20
Honda Parts, Accessories, and Apparel
This warranty is limited to Honda Power Equipment parts, accessories, and apparel when distributed by American Honda Motor Co., Inc., 4900 Marconi Drive, Alpharetta, Georgia
30005-8847.
PRODUCTS COVERED
BY THIS WARRANTY
Replacement Parts
Accessories
Apparel
LENGTH OF WARRANTY
(from date of original retail purchase)
PRIVATE
RESIDENTIAL
COMMERCIAL/
RENTAL/
INSTITUTIONAL
6 months 3 months
12 months 3 months
6 months 3 months
To Qualify for This Warranty:
1. The parts, accessories, or apparel must be purchased from American Honda or a dealer authorized by American Honda to sell those products in the United States,
Puerto Rico, and the U.S. Virgin Islands. Parts and Accessories must be purchased for installation on original Honda equipment or engines to be eligible for warranty coverage. Installing parts and accessories on non-Honda products or engines voids this warranty.
2. You must be the first retail purchaser. This warranty is not transferable to subsequent owners.
What American Honda Will Repair or Replace Under Warranty:
American Honda will repair or replace, at its option, any Honda Power Equipment parts, accessories, replacement parts, or apparel that are proven to be defective in material or workmanship under normal use during the applicable warranty time period. Anything replaced under warranty becomes the property of American Honda Motor Company, Inc.
The warranty on all replacement parts, accessories, and apparel replaced under warranty will expire coincident with the original warranty on the replaced parts, accessories, or apparel.
Parts and accessories installed by a dealer who is authorized by American Honda to sell them will be repaired or replaced under warranty without charge for parts or labor. If installed by anyone else, parts and accessories will be repaired or replaced under warranty without charge for parts, but any labor charges will be the responsibility of the purchaser.
Apparel will be repaired or replaced under warranty without any charge.
To Obtain Warranty Service:
You must, at your expense, take the Honda Power Equipment part, accessory, apparel or the Honda Power Equipment on which the part or accessory is installed, and proof of purchase to any Honda Power Equipment dealer in the United States, Puerto Rico, or the
U.S. Virgin Islands who is authorized to sell that product, during the dealer's normal business hours. To locate a dealer near you, visit our web site at http://www.PowerEquipment.Honda.com and click on Find a Dealer.
If you are unable to obtain warranty service or are dissatisfied with the warranty service you receive, contact the owner of the dealership involved; normally this will resolve the problem. However, if you should require further assistance, write or call the Power
Equipment Customer Relations Department of American Honda Motor Co., Inc. Refer to
“How to Contact Honda” on page 19
Exclusions:
This warranty does not extend to parts, accessories, or apparel affected or damaged by collision, normal wear, use in an application for which the product was not designed or any other misuse, neglect, incorporation or use of unsuitable attachments or parts, unauthorized alteration, improper installation, or any causes other than defects in material or workmanship of the product. Installing parts and accessories on non-Honda products or engines voids this warranty.
Disclaimer of Consequential Damage and Limitation of Implied
Warranties:
American Honda disclaims any responsibility for loss of time or use of the product, or the power equipment on which the product is installed, transportation, commercial loss, or any other incidental or consequential damage. Any implied warranties are limited to the duration of this written warranty. Some states do not allow limitations on how long an implied warranty lasts and/or do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusions and limitations may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
PWL50623-R
EMISSION SYSTEM WARRANTY
Your new Honda Power Equipment engine complies with the U.S. EPA,
Environment Canada, and State of California emission regulations (models certified for sale in California only). American Honda Motor Co., Inc. provides the emission warranty coverage for engines in the United States and its territories. Honda Canada Inc. provides the emission warranty for engines in the 13 provinces and territories of Canada. In the remainder of this Emission
Control System Warranty, American Honda Motor Company Inc. and Honda
Canada Inc. will be referred to as Honda.
YOUR WARRANTY RIGHTS AND OBLIGATIONS:
CALIFORNIA
The California Air Resources Board and Honda are pleased to explain the emission control system warranty on your 2013 and later Honda Power
Equipment engine. In California, new spark-ignited small off-road equipment engines must be designed, built, and equipped to meet the State's stringent anti-smog standards.
OTHER STATES, U.S. TERRITORIES, AND CANADA
In other areas of the United States and in Canada, your engine must be designed, built, and equipped to meet the U.S. EPA and Environment Canada emission standards for spark-ignited engines at or below 19 kilowatts. Specific
Honda products that do not meet the California emissions regulations can be identified by a “Not for sale in California” decal.
ALL OF THE UNITED STATES AND CANADA
Honda must warrant the emission control system on your power equipment engine for the period of time listed below, provided there has been no abuse, neglect, or improper maintenance of your power equipment engine. Where a warrantable condition exists, Honda will repair your power equipment engine at no cost to you including diagnosis, parts, and labor.
Your emission control system may include such parts as the carburetor or fuel injection system, the ignition system, and catalytic converter. Also included may be hoses, connectors, and other emission-related assemblies. (See adjacent table for additional covered parts).
OWNER'S WARRANTY RESPONSIBILITY:
As the power equipment engine owner, you are responsible for the performance of the required maintenance listed in your owner's manual. Honda recommends that you retain all receipts covering maintenance on your power equipment engine, but Honda cannot deny warranty coverage solely for the lack of receipts or for your failure to ensure the performance of all scheduled maintenance.
As the power equipment engine owner, you should however be aware Honda may deny you warranty coverage if your power equipment engine or a part has failed due to abuse, neglect, improper maintenance, or unapproved modifications.
You are responsible for presenting your power equipment engine to a Honda
Power Equipment dealer as soon as a problem exists. The warranty repairs should be completed in a reasonable amount of time, not to exceed 30 days.
If you have any questions regarding your emissions warranty rights and responsibilities, you should contact the Honda Office in your region:
American Honda Motor Co., Inc.
Power Equipment Customer
Relations
4900 Marconi Drive
Alpharetta, Georgia 30005-8847
Telephone: (888) 888-3139
Email: powerequipmentemissions
@ahm.honda.com
or
Honda Canada Inc.
180 Honda Blvd. Markham,
ON, L6C, 0H9
Telephone: (888) 946-6329
WARRANTY COVERAGE:
Honda power equipment engines sold in the United States and Canada are covered by this warranty for a period of two years from the date of delivery to the original retail purchaser or the length of the Honda Distributor’s Limited
Warranty, whichever is longer. This warranty is transferable to each subsequent purchaser for the duration of the warranty period.
If any emission-related part on your engine is defective, the part will be repaired or replaced by Honda without charge for diagnosis, parts, or labor. All defective parts replaced under this warranty become the property of Honda. A list of warranted parts is in the adjacent column. Normal maintenance items, such as spark plugs and filters, that are on the warranted parts list are warranted up to their required replacement interval only.
Honda will also replace other engine components damaged by a failure of any warranted part during the warranty period.
Only Honda approved replacement parts may be used in the performance of any warranty repairs and must be provided without charge to the owner. The use of replacement parts not equivalent to the original parts may impair the effectiveness of your engine emission control system. If such a replacement part is used in the repair or maintenance of your engine, and an authorized
Honda dealer determines it is defective or causes a failure of a warranted part, your claim for repair of your engine may be denied. If the part in question is not related to the reason your engine requires repair, your claim will not be denied.
TO OBTAIN WARRANTY SERVICE:
You must, at your own expense, take your Honda Power Equipment engine or the product on which it is installed, along with your sales registration card or other proof of original purchase date, to any Honda Power Equipment dealer who is authorized by Honda to sell and service that Honda product during his normal business hours. Claims for repair or adjustment found to be caused solely by defects in material or workmanship will not be denied because the engine was not properly maintained and used.
If you are unable to obtain emission warranty service or are dissatisfied with the warranty service you received, contact the owner of the dealership involved. Normally this should resolve your problem. However, if you require further assistance, contact the Honda office in your region. Refer to adjacent column for contact information.
EXCLUSIONS:
Failures other than those resulting from defects in material or workmanship are not covered by this warranty. This warranty does not extend to emission control systems or parts that are affected or damaged by owner abuse, neglect, improper maintenance, misuse, misfueling, improper storage, collision, the incorporation of, or use of, unsuitable attachments, or the unauthorized alteration of any part.
This warranty does not cover replacement of expendable maintenance items made in connection with required maintenance service after the item’s first scheduled replacement as listed in the maintenance section of the product
Owner’s Manual, such as: spark plugs and filters.
DISCLAIMER OF CONSEQUENTIAL DAMAGE AND LIMITATION
OF IMPLIED WARRANTIES:
American Honda Motor Co., Inc. and Honda Canada disclaim any responsibility for incidental or consequential damages such as loss of time or the use of the power equipment, or any commercial loss due to the failure of the equipment; and any implied warranties are limited to the duration of this written warranty. This warranty is applicable only where the California, U.S.
EPA or Environment Canada emission control system warranty regulation is in effect.
EMISSION CONTROL SYSTEM WARRANTY PARTS:
SYSTEMS COVERED
BY THIS WARRANTY:
Fuel Metering
Evaporative
Exhaust
Air Induction
Ignition
PARTS
DESCRIPTION:
Carburetor assembly, (includes starting enrichment system), Engine temperature sensor, Engine control module, Fuel injector, Fuel regulator, Intake manifold
Fuel tank, Fuel cap, Fuel hoses, Vapor hoses,
Carbon canister, Canister mounting brackets,
Fuel strainer, Fuel valve, Fuel pump, Fuel hose joint,
Canister purge hose joint
Catalyst, Exhaust pipe, Muffler (with catalyst)
Air cleaner case, Air cleaner element*
Flywheel comp., Flywheel magneto, Ignition pulse generator, Crankshaft position sensor, Power coil,
Ignition coil assembly, Ignition control module,
Spark plug cap, Spark plug*
Crankcase Emission
Control
Miscellaneous Parts
Crankcase breather tube, Breather valve assembly,
Oil filler cap
Tubing, fittings, seals, gaskets, and clamps associated with these listed systems
Note: This list applies to parts supplied by Honda and does not cover parts supplied by the equipment manufacturer. Please see the original equipment manufacturer’s emissions warranty for non-Honda parts.
* Covered up to the first required replacement only. See the MAINTENANCE
SCHEDULE on
PWL50975-N
21
22
PRODUCT REGISTRATION
Thank you for choosing Honda. To ensure you receive important service information in the event of a product update or recall, please register your lawn mower within 30 days of purchase.
From time to time, American Honda conducts sales promotions that require you to register your lawn mower within 30 days of purchase. If you purchased your Honda lawn mower during one of these promotions, you must register your mower within 30 days.
Your information will remain confidential. It will not be released to any other company or organization.
Failure to register your lawn mower does not diminish your warranty rights.
Please complete and mail the postage paid card or register online at
www.powerequipment.honda.com
MODEL:
SERIAL NO:
XXXX XXXX
XXXX-XXXXXXX
Print the serial number here.
* Dealer Store number * Dealer ZIP code
Serial number
Owner's Last Name
Company Name
(commercial/rental users)
Address
First Name
*If available
Telephone
( )
State ZIP Code
E-mail address
Date of Purchase
MONTH
Application
(check one)
DAY YEAR
Commercial
(professional use)
Purchased Via
(check one)
In Store Online
Non-commercial
(private, homeowner use)
Rental
(for-hire use)
1. Go to www.PowerEquipment.Honda.com to register your unit.
2. Click on Product Registration.
3. Complete the required information and click Submit.
It’s that simple!
Product Registration
BUSINESS REPLY MAIL
FIRST-CLASS MAIL PERMIT NO. 117 ALPHARETTA GA
POSTAGE WILL BE PAID BY ADDRESSEE
Power Equipment Division
American Honda Motor Co. Inc.
4900 Marconi Dr
Alpharetta GA 30005-9956
NO POSTAGE
NECESSARY
IF MAILED
IN THE
UNITED STATES
*00X31VH7 J010*
EM5
K4
00X31VH7 J010
HPE.2013.03
PRINTED IN U.S.A.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project