Product information Turntable
Product information
Pro-Ject 6 PerspeX
Manual turntable
The transparent acrylic plinth stands on three individually height-adjustable Sorbothane®-damped aluminium
cones and carries the motor and the sub-chassis. The sub-chassis, made of Corian, rests on tree magnetic
fields. A supplied spirit level allows easy adjustment of the sub-chassis.
A quiet running AC motor with a two-step acryl pulley drives the platter's outside edge via a belt.
The inverted bearing uses a stainless-steel axle carrying a ceramic ball on which the ceramic bearing plate runs.
The resonance-optimised platter is a sandwich construction utilising a fine-balanced medium density fibre
platter weighing 2Kg and a 4mm thick flat-ground layer of vinyl and a screw-down metal record clamp.
Connection to the phono input of the amplifier can be made with connecting cables of your taste through the
gold plated phono sockets and earth screw. A standard cable is provided.
External power supply avoids potential electro-mechanical interference.
Tonearm Pro-Ject 9cc Evolution
The headshell and armtube are fashioned from a single piece of carbon-fibre.
Conical armtube avoids standing wave reflections.
Inverted tonearm bearing comprises four hardened stainless tips in ABEC7 spec ballraces.
Rings provide very solid arm bearing housings. The massive outside ring is open to avoid resonances.
Sorbothane®-damped counterweight effectively counteracts unwanted resonances.
The counterweights supplied are suitable for cartridges weighing between 5 - 7,5g, 7 - 10g, 9 - 11g or
10 - 14g.
Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing
warped records.
Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).
Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.
The straight armtube with an effective length of 9" reduces toe-in error.
Silicone-damped armlift can be adjusted to suit working height of the arm.
The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated
phono sockets.
High quality connection cable Pro-Ject Connect it Phono RCA-C supplied (123cm)
Dimensions W x H x D: With dust cover closed 460 x 160 x 365mm, dust cover open 460 x 420 x 465mm.
The manufacturer reserves the right to alter the technical specifications without notice.
Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger
1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697 · © Heinz Lichtenegger · Revision 1.12.08
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF