SSAC Accessories
Accessories
Ac
ce
ss
or
ies
DIN Rail/Surface Mount Sockets
DIN Rail Mount Sockets
8 pin 600 V AC.................................. 12.2
8 pin 600 V AC.................................. 12.2
11 pin 600 V AC................................ 12.2
Hold Down Clips............................... 12.2
DIN Rail................................................ 12.3
Surface Mount Sockets
8 pin 600 V AC .................................... 12.3
Hold Down Brackets .......................... 12.3
Mounting Methods, Terminals, Varistors, Cover and Marker
Mini Mount/Standard Bracket .......... 12.4
Front Panel Mount Kit....................... 12.4
DIN Rail Mount Adaptor ................... 12.4
Heat Sink Compound ....................... 12.4
Quick Connect Screw Adaptor......... 12.5
Female Quick Connect Terminals ..... 12.5
Metal Oxide Varistors ....................... 12.5
Sealable Transparent Cover ............. 12.5
Marker Insert .................................... 12.5
Timer Adjustment Options & Dials
Versa Pot .......................................... 12.6
Q-Pot ................................................ 12.6
Versa Knob ....................................... 12.6
Lock Shaft ........................................ 12.6
Mini Pot ............................................ 12.7
Mini Knob ......................................... 12.7
Time Adjustment Dials...................... 12.7
VTP/VTR ........................................... 12.7
Motor Protectors
Three Phase Fuse Block/Disconnect .12.9
Front Panel Mount Kit....................... 12.9
Voltage Reduction Module ............... 12.9
Liquid Level Probes & Probe Holders
Liquid Level Control Electrodes ....... 12.10
Liquid Level Probe ............................ 12.10
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]
es
c
Mounting Sockets
DIN Rail or Surface Mount Sockets
8 Pin Octal Socket (600 VAC)
Description
8 pin 35 mm DIN rail or surface mount socket. OT08PC
is rated at 10 A at 600 V AC and has pressure clamp
terminals. For use with AWG 12 to 22 (3.2 to 0.33 mm2)
wire sizes. Hold-down clips not available.
P/N: •OT08PC
Approvals:
Inches (Millimeters)
8 Pin Octal Socket (600 VAC)
Description
May be surface mounted with two #6 (M 3.5 x 0.6)
screws or snaps onto a 35 mm DIN rail. A spring
mechanism allows easy removal. Screw terminals
with captive wire clamps accept up to two #14 AWG
(2.45 mm2) wires. Rated 10 A at 600 V AC. Uses
PSC8 hold-down clips.
Approvals:
P/N: •NDS-8
Inches (Millimeters)
11 Pin Magnal Socket
Description
May be surface mounted with two #6 (M 3.5 x 0.6)
screws or snaps onto a 35 mm DIN rail. A spring
mechanism allows easy removal. Screw terminals
with captive wire clamps accept up to two #14 AWG
(2.45 mm2) wires. Rated 10 A at 600 V AC. Uses
PSC11 hold-down clips.
Approvals:
P/N: •NDS-11
11 Pin Magnal Socket
Inches (Millimeters)
Description
11 pin 35 mm DIN rail or surface mount socket.
OT11PC is rated at 10 A at 600 V AC and has
pressure clamp terminals. For use with AWG 12 to
22 (3.2 to 0.33 mm2)
wire sizes. Hold-down clips are not available.
P/N: •OT011PC
Hold-Down Clips
Securely mounts plug in controls in any position.
Also provides protection against vibration. Select
the PSC8 for use with NDS-8 or the PSC11 for
use with NDS-11 sockets. Comes in sets of two.
P/N: •PSC8
•PSC11
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]
09.10
Description
MS002B01
Ac
ies
r
so
Ac
Mounting Sockets
ce
ss
DIN Rail
Description
Industry standard 35 mm aluminum or steel DIN
rail. C103PM aluminum rail is available in 36 in.
(91.4 cm) lengths.
P/N: • C103PM (Al)
Inches (Millimeters)
C103PM Aluminum Rail
(Prepunched cut out dimensions are approximate.)
Surface Mount Sockets
8 Pin Octal Socket (600 VAC)
Description
8 pin surface mount socket with binder head screw
terminals. Rated 10 A at 600 V AC. When used with
TDM, TDB, TDS Series timers the combination is UL
Listed. Uses PSCRB8 hold-down brackets.
Approvals:
P/N:
• P1011-6
Inches (Millimeters)
Hold-Down Brackets
Description
Designed for use with P1011-6 socket. Securely
mounts 8 pin plug-in controls in any position, and
provides protection against vibration. Comes in
sets of two.
P/N: • PSCRB8
MS002B01
09.10
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]
or
ies
Mounting Methods, Terminals,
Varistors, Cover and Marker
Mini-Mount/Standard Mount Bracket
Description
Provides a convenient method of mounting 2 x 2 x 1.21 in.
(50.8 x 50.8 x 30.7 mm) or 2 x 3 x 1.5 in. (50.8 x 76.2 x
38.1 mm) modules. The 90° orientation of mounting slots
makes installation/removal of modules quick and easy. The
P1023-6 secures to module with a #8 (M4 x 0.7) screw. The
P1023-7 secures to 2 x 2 x 1.21 in. (50.8 x 50.8 x 30.7 mm)
module with Mini-Pot for local adjustment. Made from steel
with a cadmium surface finish.
Mounting Method
#8 (M4 x 0.7) screw
Mini-Pot
Mounting Hole Size
P/N
0.19 in. (4.8 mm)
•P1023-6
0.25 in (6.35 mm)
P1023-7
D
D = 0.25(6.35)
(P1023-7)
D = 0.19(4.8)
(P1023-6)
Inches (Millimeters)
Front Panel Mount Kit
Description
Provides an easy method of through-thepanel mounting of 8 or 11 pin plug-in
timers, flashers, and other controls. May be
mounted in panels up to 0.125 in. (3.2 mm)
thick. Includes two clamps and two screws.
P/N: •BZ1
Inches (Millimeters)
Illustrates panel opening
size required to mount BZ1.
2
(5 .0
0.
8)
Description
0.8
)
← 1.0
(25
←
.4)
←1
.25
(31
.8)
←
P/N: •P1023-20
← (52.0
←
Allows any 2 x 2 in. (50.8 x 50.8 mm) or 2 x 3 in. (50.8 x
76.2 mm) module to be mounted on a 35 mm DIN type
rail. Comes complete with mounting hardware for 0.75 in.
(19 mm) and 1 in. (25.4 mm) thick modules.
←
←
DIN Rail Mount Adaptor
←
Mounting hole for
#8 (M4 X 0.7) bolt
Inches (Millimeters)
Heat Sink Compound Single Package
Description
Single package of heat sink compound sufficient to mount one high current, plated
2” x 2” (50.8 x 50.8 mm) timer or flasher. Contains approximately 2 grams.
P/N: •P0200-19
Heat Sink Compound
Bulk heat sink compound sufficient to mount over 50 high current, plated
2” x 2” (50.8 x 50.8 mm) timers or flashers. Contains approximately 100 grams.
P/N: • P0200-20
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]
09.10
Description
MS002B01
es
c
Ac
ies
r
so
Ac
Mounting Methods, Terminals, Varistors,
Cover and Marker
ce
ss
or
ies
Quick Connect Screw Adaptor
Description
Screw adaptor terminal designed for use with all modules
with 0.25 in. (6.35 mm) male quick connect terminals.
Screw terminal accepts ring or spade terminals.
L = 0.55 (41.0)
W = 0.32 (8.1)
P/N: •P1015-18
Female Quick Connect Terminals
Inches (Millimeters)
Description
These 0.25 in. (6.35 mm) female terminals are constructed
with an insulator barrel to provide strain relief.
Part Number
P1015-13
•P1015-64
P1015-14
Wire Size
AWG 10/12 (5.3/3.2 mm2)
AWG 14/16 (2.5/1.3 mm2)
AWG 18/22 (0.93/0.33 mm2)
L
W
L = 0.83 (21.1)
W = 0.3 (7.6)
Inches (Millimeters)
Metal Oxide Varistors
Max Impulse
Varistor Voltage Peak Clamping
Max. Operating Current 80/20 us a t 1 m A DC T est Voltage with
Current
80 us wave
current wave
Capacitance
Voltage
(A)
Min.(V) Max.(V) Vc (V) lp (A)
(pF)
DC (V) AC (V)
P/N
1200
212
268
395
10
150
150
P1012-27 200
4500
212
268
395
50
800
150
P1012-25 200
1200
389
515
775
10
85
275
P1012-3 369
4500
389
475
710
50
450
275
P1012-6 369
Available Models1012-25
Don’t see what you need? Call us for a minimum quantity and price quote!
MS002B01
09.10
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]
Size
(mm)
7
14
7
14
es
Timer Adjustment Options and Dials
Versa-Pot
Description
Approvals:
Panel mountable, industrial potentiometer recommended
for remote time delay adjustment. The shaft is slotted
for screwdriver adjustment and serrated for slip-proof
finger adjustment. Accepts Versa-Knob or Lock Shaft.
May be ordered with two 8 in. (20.3 cm) wires soldered
to pot (clockwise increase) and female quick connect
terminals on other ends by adding suffix -X to end of
part number.
Versa Pot
P/N
P1004-198
P1004-199
P1004-95
P1004-17
•P1004-16
P1004-15
•P1004-12
P1004-13
With Wire Leads
•P1004-95-X
•P1004-16-X
•P1004-12-X
Value
25KΩ
50KΩ
100KΩ
500KΩ
1 MΩ
1.5 MΩ
3 MΩ
5 MΩ
Specifications
Rating
Taper
Shaft Rotation
Tolerance
0.25W at 55°C
Linear
300° +/-5°
+/-10%
Inches (Millimeters)
Versa-Knob
Description
Versa-Knob is designed for 0.25 in (6.35 mm) shaft of
Versa-Pot or Q-Pot. Semi-Gloss industrial black finish.
SS = Set Screw
P/N: •P0700-7
Inches (Millimeters)
Lock Shaft
Description
Fits 0.25 in. (6.35 mm) potentiometer shafts.
Locks by tightening nut onto four tapered/slotted
fingers. Pressure on the shaft locks control
against mis-adjustment. Nickel plated brass
finish.
P/N: P0700-8
09.10
X = Locked on shaft
Inches (Millimeters)
AC003B01
c
Ac
ies
r
so
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]
Ac
Timer Adjustment Options and Dials
Mini-Pot
Description
A high quality, industrial potentiometer for remote time
delay adjustment. The shaft extends through the timer’s
center hole for easy panel mounting. Use mini-mount
bracket for standup mounting of timer. Adjustment by
screwdriver or mini-knob. May be ordered with two 3
in. (7.6 cm) wires soldered to pot (clockwise increase)
and female quick connect terminals on other ends by
adding suffix -X to end of part number.
P/N
P1004-10
P1004-31
With Wire Leads
P1004-10-X
P1004-31-X
ce
Specifications
Rating
Taper
Shaft Rotation
Tolerance
ss
or
ies
0.25W at 55°C
Linear
300° +/-5°
+/-10%
Value
1 MΩ
3 MΩ
Mini-Knob
Inches (Millimeters)
Description
Black plastic control knob with fluted body and white
index/dot for setting accuracy. Mounts on 0.125 in. (3.2
mm) shaft of Mini-Pot.
SS = Set Screw
Inches (Millimeters)
P/N: •P0700-21
Time Adjustment Dials
Description
Dials for use with remote Versa-Pot and panel
mounted Mini-Pot. Reverse screen printed on clear
plastic to avoid damage to printed image.
P/N
P0400-12
P0400-13
P0400-14
P0400-15
P0400-82
P0400-17
P0400-83
P0400-19
Range
Increments
.05 ... 1s
0.1s
.05 ... 2s
0.2s
.05 ... 3s
0.5s
0.1 ... 5s
0.5s
0.1 ... 10s
1s
1 ... 30s
5s
1 ... 60s
10s
2 ... 120s
20s
P/N
P0400-20
P0400-21
P0400-22
P0400-23
P0400-24
P0400-25
P0400-26
P0400-27
Available ModelsP0400-17
P0400-83
Range
Increments
2 ... 180s
30s
0.1 ... 4m
0.5m
0.1 ... 5m
0.5m
0.1 ... 6m
1m
0.1 ... 7m
1m
0.1 ... 8m
1m
0.1 ... 10m
1m
0...10
MRD*
*Multiplier Reference Dial
P0400-27
P0400-86
•P0400-82
Don’t see what you need? Call us for a minimum quantity and price quote!
VTP
Description
The VTP Series mounts on modules with in-line
adjustment terminals. Rated at 0.25W at 55°C.
Available in resistance values from 5 K Ω to 5M Ω.
Ordering Table (select one from each column)
Series
VTP
RT Value
A –
5KΩ
B – 10KΩ
C – 20KΩ
D – 50KΩ
0 – 250KΩ
1 – 0.5 MΩ
2 – 1 MΩ
3 – 2 MΩ
4 – 3 MΩ
5 – 5 MΩ
AC003B01
09.10
A –
B–
C–
D–
Top View
Approvals:
E –
F –
Available ModelsG–
H–
VTP0E
VTP1B
VTP1D
J –
VTP2A
VTP2C
VTP2E
K–
VTP2F
VTP2G
VTP2J
L –
VTP2P
VTP3B
•VTP4B
M–
•VTP4F
•VTP4J
VTP5C
N–
•VTP5G
•VTP5N
VTP5P
P –
R–
VTPDF
S –
Don’t see what you need? Call us for a minimum quantity and price quote!
T –
*Multiplier Reference Dial X –
Range
0.05 ...
1s
0.05 ...
3s
0.1 ... 10 s
0.5 ... 10 s
0.5 ... 20 s
0.5 ... 60 s
1 ... 100 s
2 ... 120 s
2 ... 180 s
10 ... 1000 s
0.1 ...
4m
0.1 ...
6m
0.1 ... 10 m
1 ... 100 m
0 ... 10 MRD*
0.1 ...
8m
0.1 ...
5m
All time range labels
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]
Ac
Motor Protectors
ce
ss
or
ies
Three Phase Fuse Block/Disconnect
Description
Description
3 Pole Fuse Block
Midget Fuse
3.0
(78 7
)
→
2 →
(52 .07
.5)
←
←
Part Number
•FH3P
•P0600-11
←→
Midget Fuse
Fast acting fuse for use with voltage monitors. Rated
2 A at 500 V AC. 1.5 x .41 in. (38.1 x 10.4 mm)
2.32
(59)
Three phase fuse block disconnect designed for use
with HRC midget fuses [1.5 x .41 in. (38.1 x 10.4 mm)]
rated up to 30 A at 600 V AC. DIN3 rail mounting. 3.9 x
2.09 x 2.2 in. (99 x 53.1 x 55.9 mm)
Front Panel Mount Kit
Description
Provides an easy method of through-thepanel mounting of 1.78 x 2.39 in.(60.7 x
45.2 mm) 8 or 11 pin plug-in controls. May be
mounted in panels up to 0.125 in. (3.2 mm) thick.
Includes two clamps and two screws.
Inches (Millimeters)
P/N: •BZ1
Illustrates panel opening
size required to mount
BZ1.
Accessory Module
575 V AC
The VRM6048 Accessory
Module allows the voltage
monitor to monitor a 3-Phase
550 ... 600 V AC Line. The
VRM can be used with voltage
monitor series: TVM, TVW, PLM,
PLR, and PLS manufactured
after December 2003.
F
VRM Module
→
460 V AC
Voltage Monitor
P/N: VRM6048
* The VRM6048 must be connected as shown. If the
voltage monitor is disconnected, the VRM output
voltage equals the input voltage.
Inches (Millimeters)
Adjustment: If the measured line voltage is
575 V AC, connect as shown and adjust/select
the voltage monitor for 460 V AC operation.
Voltage:
MP001B01
Package:
Circuitry
Mounting:
INPUT
600 V AC
575 V AC
550 V AC
F = 2 A Fast Acting Fuses are
recommended but not required.
*OUTPUT
480 V AC
460 V AC
440 V AC
Molded Housing with Encapsulated
09.10
Surface Mount with One #10 (M5 x 0.8)
Plastic Screw. May be DIN Rail
Mounted Using P1023-20 Adaptor.
Termination: Screw Terminals with Captive Wire
Clamps for up to No.12 AWG Wire.
Operating:
Storage:
Humidity:
-40°C to +70°C
-40°C to + 85°C
95% Relative, Non-Condensing
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]
Liquid Level Probes and Probe Holders
Liquid Level Control Electrodes
Description
Designed for use with all conductive liquid level controls. Composed of
insulators and metal parts made of number 300 series stainless steel.
These internally conductive probe holders are designed for a maximum
steam pressure of 240 PSI; 400 degrees F maximum. Maximum voltage
from electrode to ground.
Part Number
•PHST-38QTN
•P0700-409
Description
Probe Holder (UL353 Recognized)
Protective Boot
Inches (Millimeters)
Inches (Millimeters)
Liquid Level Probe
Description
Threaded stainless steel probe measuring 24 in.
(61 cm) long. Designed for use with PHST-38QTN liquid
level control electrodes.
P/N: •LLP-24
09.10
Inches (Millimeters)
LLC02B01
es
c
Ac
ies
r
so
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement