Eureka! Mountain Pass 2XTE, 3XTE tent Assembly Instructions

Below you will find brief information for tent Mountain Pass 2XTE, tent Mountain Pass 3XTE. This document provides information on assembling and taking down the tent. It includes important safety warnings and provides information on how to properly care for your tent to ensure its longevity.

PDF Download
Document
Eureka! Tent Mountain Pass 2XTE, 3XTE Assembly Instructions | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Double wall construction
  • High/Low venting
  • Fly rod
  • Shock corded poles
  • Guy-out cords
  • Stakes
  • Clips
  • Web buckles
  • Velcro straps

Frequently asked questions

This tent meets the flammability requirements of CPAI-84. Avoid using any flame or heat sources near the tent fabric. Do not operate any device that burns fuel inside your tent as it could produce dangerous levels of carbon monoxide. Make sure that you properly stake your tent to avoid being blown away.

Clean the tent by wiping it down with mild soap and water, then rinse thoroughly and dry completely. Avoid using detergents, washing machines, or dryers. Store the tent in a dry, cool place after it's completely dry.

Johnson Outdoors Gear LLC warrants that its products are free from defects in material and workmanship for the life of the product. The life of the product is determined from the date of purchase until the time the product is no longer serviceable due to normal wear and tear.

Johnson Outdoors Gear LLC warrants that its products are free from defects in material and workmanship for the life of the product. The life of the product is determined from the date of purchase until the time the product is no longer serviceable due to normal wear and tear.

Turn the fly right side up and drape it over the tent with the fly rod pointing over a door. Align the orange web on the fly to the orange web on the tent.
Preparing document for printing…
0%