PCI-9812/9812A/9810
PCI-9812/9812A/9810
4-CH 10/12-Bit 20 MS/s Simultaneous-Sampling Analog Input Cards
Introduction
ADLINK’s PCI-9812, PCI-9810 and PCI-9812A are 4-CH, 10 or 12-bit, 20 MS/s simultaneous-sampling analog input cards.
The high-speed analog input channels are single-ended, with hardware programmable input ranges of ±1 V, ±5 V and
input impedances of 50 Ω, 1.25 kΩ and 15 MΩ. The onboard 32 k-sample A/D FIFO can buffer so data throughput is
less than 100 Mbytes/s, the FIFO performs as the temporary A/D sample buffer, and as a rule of thumb, no data loss
will occur. When four channels operate at 20 MS/s simultaneously, each sample generates two bytes, resulting in 160
Mbyes/s (4 channels * 20 M * 2 bytes) throughput, which exceeds the peak 132 Mbyte/s bandwidth of PCI bus. To avoid
data loss, the 32 k-sample FIFO is the limitation of sample count. For applications requiring a larger number of samples
at full sampling rate, the PCI-9812A features 128 k sample A/D FIFO for storage.
In addition to the onboard 40 MHz time base, users are able to supply the external time base in either sine wave or
digital forms. The PCI-9810 and PCI-9812 also feature external digital trigger and programmable analog trigger, thus the
conversion start point of multiple cards can be synchronized to external events. The trigger modes include software-trigger,
pre-trigger, post-trigger, middle-trigger and delay trigger, further expands the capabilities of these high-speed devices.
ADLINK’s PCI-9812, PCI-9810 and 9812A deliver cost-effective and reliable data acquisition capabilities and are ideal
for vibration testing, image digitizing, ultrasonic measurement, biomedical research, ATE and other high-end industrial,
scientific, and military applications.
Features
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Supports a 32-bit 3.3 V or 5 V PCI bus
12-bit A/D resolution (PCI-9812 and PCI-9812A)
10-bit A/D resolution (PCI-9810)
Up to 20 MS/s simultaneous-sampling rate
>17 MHz -3 dB bandwidth
4-CH single-ended inputs
Bipolar analog input ranges
User-selectable input impedance of 50 Ω or high-input impedance
Onboard 32 k-sample A/D FIFO (PCI-9810 and PCI-9812)
Onboard 128 k-sample A/D FIFO (PCI-9812A)
Analog and digital triggering
External clock input for customized conversion rate
Bus-mastering DMA for analog inputs
3-CH TTL digital inputs
Compact, half-size PCB
■Operating Systems
• Windows 7/VISTA/XP/2000
• Linux
• Windows CE (call for availability)
■Recommended Software
• AD-Logger
• VB.NET/VC.NET/VB/VC++/BCB/Delphi
• DAQBench
■Driver Support
• DAQPilot for Windows
• DAQPilot for LabVIEW™
• DAQ-MTLB for MATLAB®
• PCIS-DASK for Windows
• PCIS-DASK/X for Linux
External Analog Trigger
Negative-slope
trigger event
occurs
Positive-slope
trigger event
occurs
Delay Trigger
External trigger
Event
Acquisition
start
Post trigger
counter count
from M down to 0
DMA stop
Acquire N A/D data
time
Middle-Trigger
External trigger
Event
DMA start
Acquire M A/D
data before
trigger event
DMA stop
Acquire N A/D
data before
trigger event
time
External Digital Trigger
Negative-slope
trigger event
occurs
Positive-edge
trigger event
occurs
Pre-Trigger
DMA start
External trigger Event
Acquire N A/D
data
time
Acquisition stop
Post-Trigger
DMA start
External trigger Event
DMA stop
Acquire N A/D
data after
trigger event
Acquisition start
4-9
www.adlinktech.com
time
Digitizers
1
Software &
Utilities
2
DAQ
3
Specifications
External Sine Wave Clock
■ Input coupling: AC
■ Input impedance: 50 Ω
■ Input frequency: 300 kHz to 40 MHz
■ Input range: 1.0 to 2.0 Vpp
■ Overvoltage protection: 2.5 Vpp
External Digital Clock
■ Input coupling: DC
■ Input impedance: 50 Ω
■ Compatibility: 5 V/TTL
■ Input frequency: 20 kHz to 40 MHz
■ Overvoltage protection: diode clamping, -0.3 V to +5.3 V
Digital Input
■ Number of channels: 3
■ Compatibility: 5 V/TTL with 10 KΩ pull down resistors
■ Overvoltage protection: Diode clamping, -0.3 V to +5.3 V
■ Data transfers: bus-mastering DMA with A/D samples
5
1 A typical
GPIB & Bus
Expansion
■ Dimensions (not including connectors)
173 mm x 108 mm
6
Pin Assignment
BNC Connector Assignment: Analog Inputs & External Sine Wave Clock
Motion
Control
7
CH0
CH1
Real-time
Distributed
I/O
CH2
CH3
Ext. Sine Wave CLK
8
PAC
Pin Assignment
JP1 Pin Assignment: External Digital Clock, Digital Trigger & Digital Inputs
GND
Triggering
■ Analog Trigger
· Modes: pre-trigger, post-trigger, middle-trigger, delay-trigger
· Source: CH0, CH1, CH2 and CH3
· Slope: rising/falling
· Coupling: DC
· Trigger sensitivity: 256 steps in full-scale voltage range
■ Digital Triggering
· Modes: pre-trigger, post-trigger, middle-trigger, delay-trigger
· Source: external digital trigger
· Slope: rising edge
· Compatibility: 5 V/TTL
· Minimum pulse width: 25 ns
PCI-9810
2
4
6
8
10
1
3
5
7
9
D12
■ Accuracy: ±1.5% typical
■ DNL: ±0.4 LSB typical, ±1.0 LSB maximum
■ INL: ±1.9 LSB typical
■ Input coupling: DC
■ Trigger sources: software, analog and digital trigger (5 V/TTL compatible)
■ Trigger modes: software-trigger, pre-trigger, post-trigger,
middle-trigger & delay trigger
■ FIFO buffer size
· 32 k samples (PCI-9810 & PCI-9812)
· 128 k samples (PCI-9812A)
■ Data transfers: bus-mastering DMA
1.4 A typical
PCI-9812A
GND
±10 V
D11
1.25 kΩ
+5 V
Device
PCI-9812
GND
50 Ω
±2 V
Modular
Instruments
D10
15 MΩ
Overvoltage protection
GND
±5 V
50 Ω
Ext. Digital TRG
±1 V
Input Impedance
4
GND
Input RangeModel
PXI
Ext. CIK
Analog Input
■ Number of channels: 4 single-ended Resolution
· 12-bit (PCI-9812 and PCI-9812A)
· 10-bit (PCI-9810)
■ Maximum sampling rate: 20 MS/s
■ Input signal ranges, impedance and overvoltage protection
General Specifications
■ I/O connector
· BNC x 5
· 10-pin ribbon male
■ Operating temperature: 0˚C to 40˚C
■ Storage temperature: -20˚C to 70˚C
■ Relative humidity: 5% to100%, non-condensing
■ Power requirements
9
Remote I/O
10
Communications
11
Vision
Ordering Information
■PCI-9810
4-CH 10-Bit 20 MS/s Simultaneous-Sampling Analog Input Card with 32 k-Sample A/D FIFO
■PCI-9812
4-CH 12-Bit 20 MS/s Simultaneous-Sampling Analog Input Card with 32 k-Sample A/D FIFO
■PCI-9812A
4-CH 12-Bit 20 MS/s Simultaneous-Sampling Analog Input Card with 128 k-Sample A/D FIFO
12
Fanless
Embedded
Computers
13
cPCI &
Industrial
Computers
www.adlinktech.com 4-10
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement