advertisement
◉
Touch to zoom
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
Frequently Answers and Questions
What is the PMK 550 Bracket Kit used for?
It is used for mounting accessory devices, up to 1U high, a quarter rack wide, and three inches deep, onto a PMK 550 Projector Mounting Kit base plate.
What is the maximum load capacity of the PMK 550?
The maximum load capacity is 15 lbs (6.8 kg).
How do I install the PMK 550 Bracket Kit?
Refer to the PMK 550 User Guide for detailed installation instructions.
What are the key steps involved in installing the PMK 550?
The key steps include removing the PMK 550 covers, fitting the brackets into the accessory device mounting slot, placing the accessory device between the brackets, securing the device with screws, and replacing the PMK 550 covers.
How do I secure the accessory device to the PMK 550 base plate?
Use the two 4-40 screws provided with the kit to secure the accessory device to the PMK 550 base plate.
What should I keep in mind when placing the accessory device?
Place the device onto the PMK 550 base plate with the rear panel facing inwards (towards the projector pipe) to allow for easy cable connection.
Where can I find more information about configuring and operating the accessory device?
Refer to the user manual for the accessory device for configuration and operation details.
Download PDF
advertisement