FZ-Lite VISION SENSOR
FZ-Lite VISION SENSOR
Easy inspection beyond expectation
» Intuitive user guidance
OMRON Corporation
Industrial Automation Company
Authorized Distributor:
Tokyo, JAPAN
» Flexible Vision platform
Contact: www.ia.omron.com
Regional Headquarters
OMRON EUROPE B.V.
Sensor Business Unit
Carl-Benz-Str. 4, D-71154 Nufringen, Germany
Tel: (49) 7032-811-0/Fax: (49) 7032-811-199
OMRON ELECTRONICS LLC
One Commerce Drive Schaumburg,
IL 60173-5302 U.S.A.
Tel: (1) 847-843-7900/Fax: (1) 847-843-7787
OMRON ASIA PACIFIC PTE. LTD.
No. 438A Alexandra Road # 05-05/08 (Lobby 2),
Alexandra Technopark,
Singapore 119967
Tel: (65) 6835-3011/Fax: (65) 6835-2711
OMRON (CHINA) CO., LTD.
Room 2211, Bank of China Tower,
200 Yin Cheng Zhong Road,
PuDong New Area, Shanghai, 200120, China
Tel: (86) 21-5037-2222/Fax: (86) 21-5037-2200
» Crystal-clear imaging
© OMRON Corporation 2010 All Rights Reserved.
In the interest of product improvement,
specifications are subject to change without notice.
Printed in Japan
Cat. No. Q182-E1-01
1210 (1210) (W)
2
3
Simple, flexible & crystal clear
The new FZ-Lite integrates the benefits of a
Smart Camera and a powerful Vision System
in a single platform.
The unique image clarity achieved by using
an intelligent camera enables simple setup,
fast installation and enhanced optical
performance.
Features
• Crystal-clear image quality
• Real Color Processing (16 million colors)
• C-mount and Smart Cameras
• EtherNet/IP & TCP/IP communication
Benefits
• Simple and guided set-up
• Reliable results on any surface
• One platform for any application
In combination with the powerful
FZ-Lite controller it takes you into a
new dimension of image processing.
Highest performance, simplicity and
unique flexibility are defining a new standard
for Compact Vision Sensors.
Simple Operation
FZ-Lite supports the Smart Camera
technology from the FQ-series Sensors.
This allows fast and easy installation
of the camera on the machine, without
further optics and illumination. Crystal
Clear images can be easily captured
using High-power Lighting and a Polarizing Filter that eliminates glare.
Intelligent Compact Camera
Camerra
Con
ntroller
Lite Controller
Monitor
Flexible Flow configuration
More than 20 processing items are provided by FZ-Lite, such as dimension
measurements, various search items
(pattern, contour), defects, edge and
count tools. These processing items,
can be combined in a flow program, offering branches or loops. This offers a
new dimension of flexibility for Compact Vision Sensors.
Open Network
EtherNet/IP, a global standard for
factory automation data networking,
is supported for seamless integration into a production line or machine.
This allows users to easily connect to
any EtherNet/IP enabled devices from
any manufacturer. Further communication is possible via TCP/IP, serial and
parallel interfaces.
4
5
A new benchmark in image clarity
Simple Operation
Achieving sharp and crystal clear images that improve inspection performance has never been so easy. The FZ-Lite
features powerful functions, to eliminate the effects of direct reflections, environmental light interference and big
variations in brightness. These cutting edge functions shorten and simplify the installation and setup procedure.
Simply don't care anymore about how to install the camera in the best way, to get a sharp image.
The Camera utilizes integrated High-power Lighting that enables
uniform illumination in the field of view. Utilizing a new optical design,
bright and clear images can be achieved without additional lighting.
A Polarizing Filter can be used to cut direct light reflections to eliminate the common issue of glare resulting from highly reflective surfaces.
A high dynamic range (HDR) function is provided to eliminate the
influence of objects with irregular reflectance and changes in
external light conditions. By increasing the high dynamic range by a
factor of up to 5,000, objects that previously could not be detected
due to inconsistent lighting or halation can be clearly inspected.
Real Color Sensing
Uniform Brightness
Underexposure
HDR Image
Inspection and
Measurement Items
Measurements
Dimension Measurements
Workpiece Count
Scan Edge Width
Labeling
Multiple measurements can be performed on the objects for their minimum width, maximum width, and
average width. Enhanced performance
is also provided to detect the depth of
grooves on metal shafts.
A cluster of objects is extracted as
labels, and the parameters for area,
center of gravity, and other factors are
generated for output and further processing. Perform measurements for
roundness, enclosing rectangles, and
circumference measurement. Counting by sorting of the labels according
to coordinates or size can also be
performed.
Halation
Monochrome
Real Color
Color sensing is standard for OMRON Vision Sensors. Real color
processing enables stable detection of minute color differences,
which is difficult to perform using color gray processing or filtering.
It is not necessary to perform color extraction or redo the setup
every time the workpiece color changes.
Appearance Inspections
Inspection of Defects
Defects
Perform inspection of defects and dirt
on solid-colored objects, component
chips or burrs.
Fine Matching
2 Million Pixel Camera
Inspections that require high resolution can be solved with the
2 Million Pixel Camera. Presence and dimension inspections can be
realized. At a rate of 30 frames per second. The input speed is the
highest in this class. The use of a C-mount Lens enables applications in any field of view.
Flexible Application
Typical Problem
Camera with integrated High-power Lighting
HDR Sensing
Powerful processing items for any
inspection and industry
Fine Matching is ideal when the background has a pattern. In Combination
with the standard image it enables
high-speed, high-precision inspection
for minute dirt and edge chips.
2 Million Pixel
A: Standard work
QTY:60
Materials
Vitamin A
Amount
10g
Vitamin D
Vitamin E
5g
10g
TAKE ONE TABLET BY MOUTH
TWICE DAILY
Amount per Tablet
CALCIUM
IRON
100%
80%
B: Different kind work
QTY:60
TAKE ONE TABLET BY MOUTH
TWICE DAILY
Detection of Subtle Differences
Sensitive Search
Detailed matching is performed by
automatically separating a registered
image. Subtle differences that cannot
be determined using normal searches
are detected with good stability and
correlation difference. So, there's no
need for accurate threshold settings.
Amount per Tablet
CALCIUM
IRON
100%
80%
Character Inspections
Inspection of Expiration Dates
Prevention of False Rejections
Date Verification
Flexible Search
By simply setting the period of production, the character string can be
automatically verified and the printing can be easily validated. The
printed expiration date is changed
automatically every day.
Inspection can be performed to accept items with variations in printing
quality and shape, and to reject only
those items that are obviously wrong.
Registering multiple images of acceptable items as models enables
stable searching regardless of the
printing quality or changes in shape.
6
Choose the interface you need
Open Network
A variety of interfaces, such as EtherNet/IP, general-purpose Ethernet, and serial communications allows
easy communication with a PLC or other external devices.
EtherNet/IP
Easier, Faster
EtherNet/IP is a widely used communication protocol in factories around the world. You can
easily connect to OMRON PLCs or any other vendor device that supports EtherNet/IP to enable
high-speed communication.
PLC Link Function
Network Drive Function
Easy Creation of Ladder Programs
Network Logging
A PLC Link function is included to reduce the effort in ladder
programming for serial communications and standard Ethernet.
The network drive function in FZ-Lite allows users to output and
store images and measurement values to computers over a
network, not limited to internal or only to USB memory. Connecting a large-capacity hard drive enables long-term image logging.
It can also be used for storage of configuration data. Back-up
and restore of any data over the network is also supported.
Applicable PLCs
OMRON CS, CJ, CP, and NSJ Series
Mitsubishi Electric Q Series
Computer
Hard drive
Network logging
HUB
Reading and writing I/O
memory areas can be
easily set on the special
menu screen.
Uploading and
downloading
scene data
Controller
7
Ordering Information
Controllers
Appearance
Type
Model
Two-camera controllers
Lite Controllers
Four-camera controllers
Remarks
NPN
FZ3-L350
---
PNP
FZ3-L355
---
NPN
FZ3-L350-10
---
PNP
FZ3-L355-10
---
Model
Remarks
Cameras
Appearance
Type
Wide View (Short-distance) @100mm Color
Intelligent Compact
Cameras
FZ-SQ100N
Wide View (Long-distance) @100mm
Color
FZ-SQ100F
Standard @50mm
Color
FZ-SQ050F
Narrow View @10mm
Color
FZ-SQ010F
Wide field of vision
Color
FZ-SLC100
Camera + Zoom, Autofocus
Lens + Intelligent Lighting
Intelligent Cameras
Narrow field of vision
Color
FZ-SLC15
Wide field of vision
Color
FZ-SZC100
Narrow field of vision
Color
FZ-SZC15
Color
FZ-SC2M
Monochrome
FZ-S2M
Color
FZ-SC
Monochrome
FZ-S
Color
FZ-SFC
Monochrome
FZ-SF
Color
FZ-SPC
Monochrome
FZ-SP
Color
FZ-SHC
Monochrome
FZ-SH
Camera + Zoom, Autofocus
Lens
Autofocus Cameras
Digital Cameras
Digital Cameras
Small Digital Cameras
Small Digital Cameras
High-speed Cameras
Camera +Lens +
High-power Lighting
2 million pixels
300,000-pixels
300,000-pixel flat type
Lens required
300,000-pixel pen type
300,000-pixels
Cameras peripheral devices
Appearance
Type
Model
CCTV Lenses
Remarks
---
3Z4S-LE Series
Extension Tubes
---
Low-distortion Lenses
FZ-LEH5/LEH8/LEH12/LEH16/
LEH25/LEH35/LEH50/LEH75/
LEH100
Low distortion lens for 2-million Pixel
Cameras
Lenses for Small Camera
FZ-LES3/LES6/LES16/LES30
Lens for 300,000-pixel Small Cameras
Extension Tubes for Small Camera
FZ-LESR
Extension Tubes for 300,000-pixel Small
Cameras
Wide field of vision
FZ-SLC100-DL
---
Narrow field of vision
FZ-SLC15-DL
---
Intelligent Camera Diffusion Plate
8
Ordering Information
Cables
Appearance
Type
Cable length:
Model
Remarks
Camera Cable
2m, 5m, 10m (See note 2)
FZ-VS
---
Bend resistant Camera
Cables
2m, 5m, 10m (See note 3)
FZ-VSB
---
Right-angle Camera Cable
(See note 1)
2m, 5m, 10m (See note 2)
FZ-VSL
---
Long-distance Camera
Cable
15m (See note 4)
FZ-VS2
---
Long-distance Right-angle
Camera Cable
15m (See note 4)
FZ-VSL2
---
Cable Extension Unit
Maximum cable length: 45 m
(Up to two Extension Units and three
Cables can be connected.)
FZ-VSJ
---
Monitor Cable
2m, 5m
FZ-VM
---
2m, 5m
FZ-VP
---
2m, 5m, Connector-type
FZ-VPX (See note 5)
---
Parallel Cable
Note: 1.
2.
3.
4.
5.
This Cable has an L-shaped connector on the Camera end.
The 10-m Cable cannot be used for the Intelligent Camera and Autofocus Camera.
The 10-m Cable cannot be used for the Intelligent Camera, Autofocus Camera and 2 Million-pixel Camera.
The 15-m Cable cannot be used for the Intelligent Camera and Autofocus Camera.
Connector-Terminal Block Conversion Units can be connected (Recommended Products: OMRON XW2B-50G4/50G5, XE2D50G6).
Peripheral devices
Appearance
Type
LCD Monitor
FZ-M08
USB Memory
FZ-MEM1G
Strobe Controller
Strobe Controller
-----
Model
Mouse
External Lighting
For 3Z4S-LT Series
Remarks
---
Capacity: 1 GB
One channel
Manufactured by MORITEX
Corporation
3Z4S-LT MLEK-C100E1TS2
One channel
FZ-LTA100
Two channels
FZ-LTA200
Required to control external lighting
from a Controller
For FZ-LT Series
---
---
3Z4S-LT Series
---
FZ-LT Series
---
9
Ratings and Performance
Lite Controller
Model
NPN
FZ3-L350
PNP
FZ3-L355
No. of Cameras
Processing
resolution
2
With Intelligent Compact Camera
752 (H) × 480 (V)
When connected to a 300,000-pixel camera
640 (H) × 480 (V)
When connected to a 2 million-pixel camera
1600 (H) × 1200 (V)
Processing Items
Main functions
Inspections / Measurement
Image Capturing
Camera image Input, Camera Image Input HDR, Camera Image Input HDR
Lite, Camera Switching, Measurement Image Switching
Correcting images
Position Compensation, Filtering, Backgrond Suppression, Color Gray Filter,
Extract Color Filter, Anti Color Shading, Polar Transformation
Assisting inspections /
measurement
Calculation, Line Regression, Circle Regression, Set Unit Data, Get Unit Data,
Set Unit Figure, Get Unit Figure, Trend Monitor, Image Logging, Data Logging,
Elapsed Time, Wait, Focus, Iris
Branching processing
Conditional Branch, End, DI Branch
Outputting results
Serial data output, Parallel data output, Parallel judgement output, Fieldbus
data output
Result Display, Display Image File, Display Last NG Image
Number of simultaneous inspections1
No limit to setting (as permitted by memory capacity)
Position compensation
Yes
(flexible combination with processing items for inspections and measurements)
Number of registered scenes
32
With Intelligent
Compact Camera
When connected
to a 300,000-pixel
camera
When connected
to a 2 million-pixel
camera
Connected to 1 camera
214
Connected to 2 cameras
107
Connected to 3 cameras
71
Connected to 4 cameras
53
Connected to 1 camera
Color Camera: 250, Monochrome Camera: 252
Connected to 2 cameras
Color Camera: 125, Monochrome Camera: 126
Connected to 3 cameras
Color Camera: 83, Monochrome Camera: 84
Connected to 4 cameras
Color Camera: 62, Monochrome Camera: 63
Connected to 1 camera
Color Camera: 40, Monochrome Camera: 40
Connected to 2 cameras
Color Camera: 20, Monochrome Camera: 20
Connected to 3 cameras
Color Camera: 13, Monochrome Camera: 13
Connected to 4 cameras
I/O
specifications
FZ3-L355-10
4
Search, Flexible Search, Sensitive Search, ECM Search, Ec Circle Search,
Classification, Edge Position, Edge Pitch, Scan Edge Position,
Scan Edge Width, Color Data, Gravity and Area, Labeling, Label Data, Defect,
Precise Defect, Fine Matching, Character Inspection, Date Verification,
Model Dictionary, Circle Angle
Displaying results onthe monitor
Number of
logged images
(See note 1.)
FZ3-L350-10
Color Camera: 10, Monochrome Camera: 10
Serial communications
RS-232C 1CH
Network communications
Ethernet 1000BASE-T/100BASE-TX/10BASE-T
EtherNet/IP
Ethernet port baud rate: 100 Mbps (100Base-TX)
Parallel I/O
11 inputs (RESET, STEP, DSA, and DI 0 to 7), 26 outputs
(RUN, BUSY, GATE, OR, READY, ERROR, STGOUT 0 to 3, and DO 0 to 15)
Monitor interface
Analog RGB video output, 1 channel
(Resolution: XGA 1,024 × 768 dots)
USB interface
2 channels (supports USB 1.1 and 2.0)
Operation
Mouse or similar device
Settings
Create series of processing steps by editing the flowchart
(Help messages provided).
Power supply voltage (See note 2.)
20.4 to 26.4 VDC
With Intelligent Compact Camera
Ratings
Current
consumption
(See note 3.)
(at 24.0 VDC)
When connected to a intelligent or
autofocus camera
When connected to a 300,000-pixel
camera
When connected to a 2 millionpixel camera
Environmental
immunity
4.0 A max.
5.5 A max.
2.6 A max.
2.9 A max.
Ambient temperature range
Operating: 0 to 50 °C, Storage: −25 to 65 °C (with no icing or condensation)
Ambient humidity range
Operating and storage: 35% to 85% (with no condensation)
Ambient atmosphere
No corrosive gas
Degree of protection
IEC 60529 IP20
Materials
Plating steel board
Weight
Approx. 1.8kg
Accessories
Instruction Manual
Note: 1. The number of logged images will vary when connecting multiple Cameras with different models.
2. Do not ground the positive terminal of the 24-VDC power supply to the Lite Controller.
If the positive terminal is grounded, electrical shock may occur when an SG (0-V) part, such as the case of the Controller or Camera,
is touched.
3. The current consumption when the maximum number of Cameras supported by each Controller are connected. If a strobe Controller
model is connected to a lamp, the current consumption is as high as when an Intelligent Camera is connected.
10
Ratings and Performance
LCD Monitor
Monitor Cable
Model
FZ-M08
Model
Size
8.4 inches
Type
Liquid crystal color TFT
Resolution
1,024×768 dots
Input signal
Analog RGB video input, 1 channel
Power supply voltage
21.6 to 26.4 VDC
Current consumption
Ambient temperature
range
Ambient humidity range
Operating and storage: 35% to 85%
(with no condensation)
Weight
Approx. 1.2 kg
Accessories
Instruction Sheet and 4 mounting brackets
FZ-VM
Vibration resistiveness
10 to 150 Hz single amplitude 0.15 mm 3
directions, 8 strokes, 4 times
Ambient temperature
range
Operation: 0 to +50 °C, Storage: −20 to +65 °C
(with no icing or condensation)
Ambient humidity range
Operation and storage: 35% to 85%RH
(with no condensation)
Approx. 0.7 A max.
Ambient atmosphere
No corrosive gases
Operating: 0 to 50 °C, Storage: −25 to 65 °C
(with no icing or condensation)
Material
Cable sheath: heat-resistant PVC
Connector: PVC
Minimum bending radius 75 mm
Weight
approx.170 g
Intelligent Compact Camera
Model
FZ-SQ010F
Field of vision
Installation distance
Image input
Lighting
FZ-SQ050F
FZ-SQ100F
FZ-SQ100N
7.5×4.7 to 13×8.2 mm
13×8.2 to 53×33 mm
53×33 to 240×153 mm
29×18 to 300×191 mm
38 to 60 mm
56 to 215 mm
220 to 970 mm
32 to 380 mm
Image processing method
Real color
Image elements
1/3-inch color CMOS
Shutter
1/250 to 1/32258
Processing resolution
752 (H) × 480 (V)
Partial function
8 to 752 lines
Lighting method
Pulse
Lighting color
White
LED class
Class 2
Ambient temperature range Operating: 0 to 50 °C, Storage: −25 to 65 °C (with no icing or condensation)
Environmental
immunity
Ambient humidity range
Operating and storage: 35% to 85% (with no condensation)
Ambient atmosphere
No corrosive gas
Degree of protection
IEC 60529 IP40 (with Polarizing Filter Attachment mounted.)
Materials
Camera: PBT, PC, SUS
Mounting Bracket: PBT
Polarizing Filter Attachment: PBT, PC
Weight
Approx. 160 g
•
•
•
•
Accessories
Approx. 150 g
Mounting Bracket (FQ-XL) (1)
Polarizing Filter Attachment (FQ-XF1) (1)
Instruction Manual
Member registration sheet
System configuration
Input device
Mouse
USB connection
PC
RS-232C
Ethernet
Analogue RGB
RGB Monitor
Parallel I/O
PLC
Camera connected
Dimensions
(Unit: mm)
Controllers
[email protected]
[email protected]
12
197
80
182.3
The 2-camera type has only two
camera connectors on its left side.
Intelligent Compact Camera
Narrow View and Standard
Wide View
FZ-SQ010F
FZ-SQ050F
FZ-SQ100F (Long-distance)
FZ-SQ100N (Short-distance)
44
1
46
(94.8)
20
9
3
(49)
8
20
Mounting Hole Dimensions
Note. The Mounting Bracket can be mounted to either side.
Mounting Hole Dimensions
20±0.1
s
ole
o,
Tw dia. h
4.5
1/4-20UNC
Depth: 6
Four-M4
Depth: 6
s
ole
o,
Tw dia. h
4.5
Tightening torque: 1.2 N.m
20±0.1
20
(4.8)
8
32
20
1/4-20UNC
Depth: 6
Four-M4
Depth: 6
9
(57)
(4.8)
11
Mounting Bracket
(See Note.)
Polarizing
Filter
Attachment
67
(94.8)
32
Polarizing
Filter
Attachment
44
45
Mounting Bracket
(See Note.)
45
67
Optical
axis
1
46
Optical
axis
Tightening torque: 1.2 N.m
Note. The Mounting Bracket can be mounted to either side.
LCD Monitor
FZ-M08
Mountable plate thickness:
1.6 to 5.0 mm
(6)
40
(103.5)
(31.5)
75
(12.5)
Four, M4
26
(38)
(129.4)
171
75
161
(185)
(173.4)
(85.5)
(130)
(90)
(172)
230
220
Refer to the FZ3-900-series Catalog (Cat. No. Q171-E1) for information on the ratings and performance of Intelligent Cameras, High-speed Cameras,
Compact Digital Cameras, Camera Cables, and Peripheral Devices.
11
12
Optical Chart
Intelligent Compact Camera
Narrow View
Standard
Wide View (Long-distance)
Narrow View (Short-distance)
FZ-SQ010F
FZ-SQ050F
FZ-SQ100F
FZ-SQ100N
300
240
Field of vision
13
7.5
Field of vision
Field of vision
191
153
33
13
8.2
8.2
4.7
60
38 to
0
53
Field of vision
56
0
to
29
53
33
215
0
970
18
32
to
220
0
380
to
Intelligent Cameras, Autofocus Cameras
Narrow View
FZ-SLC15
FZ-SZC15
Field of vision 13.8 to 14.9
Field of vision 13.8 to 14.9
2.9 to 3.1
2.9 to 3.1
13.8 to 14.9
0
2.9
to 3.1
55
35 to
0
13.8 to 14.9
2.9
to 3.1
67.5
to
47.5
Wide View
FZ-SLC100
FZ-SZC100
29 to 100
29 to 100
Field of vision
Field of vision
29 to 100
12.6 to 52
12.6 to 52
to
0
70
29 to 100
12.6 to 52
190
0
12.6 to 52
to
77.5
197.5
* Field of Vision
The images displayed on the monitor will be rectangular images of 640×480 pixels. The valid processing area for measurements is the
480×480-pixel area in the middle.
The above figures show the dimensions of the middle 480×480 pixels.
13
2 Million-pixel Digital Camera
[email protected]
10000
FZ-LEH5
FZ-LEH8
FZ-LEH12
FZ-LEH16
FZ-LEH25
FZ-LEH35
t0
t0
FZ-LEH50
FZ-LEH75
FZ-LEH100
t1
t2
t0
t5
t0
Camera distance (mm)
t10
1000
t15
t20
t10
t25
t35 t30
t45 t40
t15
t50
t20
t25
t40 t35 t30
t5
t10
t1
t25
t15
t2
t1
t20
t30
t5
t2
t10
t15
t20
t5
t2
t10
t5
t1
t0
t2
t0
t0
t0
t1
t0
t1
t0.5
t15
100
t5
t2
t10
t5
t10
t5
7
t0.5
t1
t1.5
30
t1
t2
10
100
1000
Field of vision (mm)
The 5-mm Extension Tubes (3Z4S-LE ML-EXR) cannot be used with FZ-LEH25 Lenses.
300,000-pixel Small Digital Cameras
[email protected], [email protected]
10000
FZ-LES30
FZ-LES16
FZ-LES6
FZ-LES3
WD (See Note.1) (mm)
t0
t0
1000
t0
t0
t5
t10
100
t15
t30 t25
t40
t35
t50 t45
t55
t60
t20
t5
t10
t15
t20
10
1
10
100
Field of vision (mm)
Note: 1. The vertical axis represents WD, not installation distance.
1000
Optical Chart
300,000-pixel High-speed Camera, and Digital Camera
[email protected], [email protected]
10000
t0
t0
t0
1000
t60
t50
t50
100
t45
t40
t0
t10
t15
t2
t20 t15 t10
t30 t25
t45 t40 t35 t20 t15
t40 t35 t30 t25
t10
t15
t5
t25 t20
t10
t20 t15
t5
t10
ML-0614
ML-0813
ML-1214
ML-1614
ML-2514
ML-3519
ML-5018
ML-7527
ML-10035
t2
t5
t25 t20
t35 t30
3Z4S-LE
t0
t0
t2
Camera distance (mm)
14
t10 t5
t5
t5
t1
t1.5
t0.5
t1.5
t2
t1
t1.5
t2
t1
t1.5
t2
t1
t0
t0.5
t1
t0
t0.5
t0
t0.5
t0.5
t0.5
t1.5
t2
t1.5
t1
t0.5
t1
30
3
10
100
1000
Field of vision (mm)
■ Meaning of Optical Chart
The X axis of the optical chart shows the field of vision (mm) (Note1),
and the Y axis of the optical chart shows the camera installation distance (mm) (Note2).
Camera
Extension Tube
thickness: t (mm)
Lens
Camera
distance
(mm)
WD
(mm)
Field of vision (mm)
Y
Field of
vision
X
Note: 1. The lengths of the fields of vision given in the optical charts are the lengths of the Y axis.
2. The vertical axis represents WD for small cameras.
READ AND UNDERSTAND THIS DOCUMENT
Please read and understand this document before using the products. Please consult your OMRON representative if you have any questions or comments.
WARRANTY
OMRON’s exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if
specified) from date of sale by OMRON.
OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR
FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS
DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED.
LIMITATIONS OF LIABILITY
OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS IN
ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY.
In no event shall responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.
IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS
OMRON’S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND
NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.
SUITABILITY FOR USE
THE PRODUCTS CONTAINED IN THIS DOCUMENT ARE NOT SAFETY RATED. THEY ARE NOT DESIGNED OR RATED FOR ENSURING
SAFETY OF PERSONS, AND SHOULD NOT BE RELIED UPON AS A SAFETY COMPONENT OR PROTECTIVE DEVICE FOR SUCH
PURPOSES. Please refer to separate catalogs for OMRON's safety rated products.
OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the
customer’s application or use of the product.
At the customer’s request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply
to the products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end
product, machine, system, or other application or use.
The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all
possible uses of the products, nor is it intended to imply that the uses listed may be suitable for the products:
• Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document.
• Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles,
safety equipment, and installations subject to separate industry or government regulations.
• Systems, machines, and equipment that could present a risk to life or property.
Please know and observe all prohibitions of use applicable to the products.
NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT
THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT IS PROPERLY RATED
AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
PERFORMANCE DATA
Performance data given in this document is provided as a guide for the user in determining suitability and does not constitute a warranty. It may
represent the result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject
to the OMRON Warranty and Limitations of Liability.
CHANGE IN SPECIFICATIONS
Product specifications and accessories may be changed at any time based on improvements and other reasons.
It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made.
However, some specifications of the product may be changed without any notice. When in doubt, special model numbers may be assigned to fix
or establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual
specifications of purchased products.
DIMENSIONS AND WEIGHTS
Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.
ERRORS AND OMISSIONS
The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical,
typographical, or proofreading errors, or omissions.
PROGRAMMABLE PRODUCTS
OMRON shall not be responsible for the user’s programming of a programmable product, or any consequence thereof.
COPYRIGHT AND COPY PERMISSION
This document shall not be copied for sales or promotions without permission.
This document is protected by copyright and is intended solely for use in conjunction with the product. Please notify us before copying or reproducing this
document in any manner, for any other purpose. If copying or transmitting this document to another, please copy or transmit it in its entirety.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement