First Alert | 2 Cu. Ft. Combination Executive Safe | User's Manual | First Alert 2 Cu. Ft. Combination Executive Safe User's Manual

First Alert 2 Cu. Ft. Combination Executive Safe User's Manual
Limited Warranty
Operation & Installation Guide
If your First Alert® Firesafe is ever damaged by a fire, BRK will replace it with a comparable model at
no charge to the consumer. Freight on the replacement unit is not included in the guarantee and
must be paid by the consumer.
For claims, submit your name and address, a photo of the damaged safe along with its Model
Number, and a copy of the Fire Department report to BRK Consumer Affairs as proof of loss. Once
the information is received, Consumer Affairs will contact you with further instructions.
BRK Brands, Inc., (“BRK”) warrants that for a period of five (5) years from the date of purchase, this
product will be free from defects in material and workmanship. BRK, at its sole option, will repair or
replace this product or any component of the product found to be defective during the warranty
period. Replacement or repair will be made with a new or remanufactured product or component.
If the product is no longer available, replacement may be made with a similar product of equal or
greater value. This is your exclusive warranty.
This warranty is only valid for the original retail purchaser from the date of initial retail purchase and
is not transferable. You must keep the original sales receipt. Proof of purchase is required to obtain
warranty performance. BRK dealers, service centers, or retail stores selling this product do not have
the right to alter, modify or in any way change the terms and conditions of this warranty.
This warranty does not apply to the finish on the product. This warranty does not cover normal
wear and tear of parts or damage resulting from any of the following: negligent use or misuse of
the product, use contrary to the operating instructions, disassembly, repair or alteration by anyone
other than BRK or an authorized service center, improper installation, or exposure to extremes of heat
or humidity. Further, the warranty does not cover Acts of God, such as fire, flood, hurricanes and
BRK shall not be liable for any incidental or consequential damages caused by the breach of any
express or implied warranty. BRK is also not responsible for: costs associated with removing or
installing the product; damage or loss of the contents of the product; nor for the unauthorized
removal of the contents; or damages incurred during shipment.
2190F 2575F 2700F 2702F
Except to the extent prohibited by applicable law, any implied warranty of merchantability or
fitness for a particular purpose is limited in duration to the duration of the above Warranty Period.
Some states, provinces or jurisdictions do not allow the exclusion or limitation of incidental or
consequential damages or limitations on how long an implied warranty lasts, so the above limitations
or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also
have other rights that vary from state to state, or province to province, or jurisdiction to jurisdiction.
If you have any questions that cannot be answered by reading this manual,call
Consumer Affairs at 1-800-323-9005
© 2009 BRK Brands, Inc., a Jarden Corporation company (NYSE: JAH)
3901 Liberty Street Road, Aurora, IL 60504-8122
All rights reserved.
Read These Instructions Very Carefully!
Home and Office Security Safes
Safe Identification Record
Overview of Your Safe ..................................................... Page 1
Recovering Lost Combinations
Opening & Closing Your Safe......................................... Page 2
The following information is needed to provide you with your combination:
Opening The First Time
Your Combination
Opening With Combination Dial
Closing & Locking The Safe
• Name / Address / Telephone
• Safe Model Number / Serial Number
• Key Number (located on the key and on the Emergency Override Key lock)
• E-mail address if available
Additional Features: Shelves.......................................... Page 3
Consumer Affairs .............................................................. Page 4
Your Safe’s Unique Identification #’s
How To Contact Us
Ordering Replacement Keys
Recovering Lost Combinations
Use, Care and Maintenance ........................................... Page 6
For Your Protection
Do not remove the Serial Number tag from the safe.
Record all Safe Identification Numbers on Safe Identification Record (last page).
Save this manual and NEVER keep it inside the safe.
Model Number
Serial Number
Key Number
4-Number Combination
RIGHT FOUR (4) turns and continue to:
LEFT TWO (2) turns and continue to:
RIGHT ONE (1) turn and continue to:
LEFT to:
Home and Office Security Safes
Overview of Your Safe
Your new First Alert® Fire Theft Safe™ will provide years of safe and secure
protection for your valuables, important documents and other personal items.
All First Alert® safes are designed and built using the highest manufacturing
standards to ensure maximum user satisfaction under a variety of conditions.
With proper care, your First Alert® safe will provide “Peace of Mind” for many
years to come.
Thank you and Enjoy!
The following list outlines the items and quantities of each included with
your new safe. Please carefully check the list to confirm all items have been
received. If any item is missing, then please contact Customer Service
@ 1-800-323-9005.
Package Contents
Models 2190F, 2575F, 2700F, 2702F
L 570
Operation & Installation Guide
Companion Keys Storage Drawer Keys (2700, 2702) Removable Shelves (1 only for 2190) Shelf Support Clips (4 only for 2190)
1 ea
2 ea
2 ea
2 ea
8 ea
If you are missing parts, have difficulty programming your safe or have any other questions pertaining
to its proper use and care, DO NOT RETURN your safe to the store. Please contact Consumer Affairs at
1-800-323-9005, 7:30 am – 5:00 pm Central Standard Time, Monday through Friday. To assist us in
serving you, please have the model number and date of purchase available when calling.
Home and Office Security Safes
Opening & Closing Your Safe
Opening The First Time
The dial is preset to the fourth (last) number in the combination.
The safe door should open when you insert the Companion
Entry Key (with the round top), turn to the right and pull the door
open. The dial may move in transit, making it necessary to dial the
combination before opening the first time We recommend
trying the following combination procedure with safe door open first.
Your Combination
The combination for your safe can be found imprinted on the inside back
cover of this manual. It is a preset 4 number sequence that is unique to your
safe and cannot be changed. It is recommended that you keep this manual in
Opening With Combination Dial
1. Turn dial right (clockwise) three times to clear settings.
2. Start the dial on 0 (zero) to dial combination,
3. Turn dial RIGHT, passing first combination number FOUR (4) times and
stop at number on fifth time around.
4. Turn dial LEFT, passing second combination number TWO (2) times and
stop at number on third time around.
5. Turn dial RIGHT, passing third combination number ONE (1) time and
stop at number on the second time around.
6. Turn dial LEFT, to the last combination number and STOP.
7. Insert the key in the lock and turn key RIGHT, then move handle to the
open position and pull door open.
Closing & Locking The Safe
1. When open, the key is turned right (the unlocked position).
2. Close the safe door and turn the key to the left.
3. Handle will automatically move to closed position.
4. Remove the key and spin the combination dial twice.
Frequent Key-Only Access
When circumstances require frequent, quick and convenient access for limited periods during the day, you may choose to keep the commbination positioned on the last number and lock only the keylock. However, the safe is not fully locked until spinning the dial.
The safe is ONLY fully locked after turning key to the locked position and spinning
the dial. For your security, we recommend always locking both the combination dial
and key lock for the highest level of protection & security.
Home and Office Security Safes
Use, Care and Maintenance
Appropriate Use of Your Safe
First Alert® fire safes protect paper records and many other valuables.
Verified fire protection for:
Memory sticks, CD’s & DVD’s, USB Drives.
This product is NOT INTENDED to protect audio or video cassettes, floppy discs,
data cartridges, film and photos or photo negatives
Testing shows that the interior temperature of the safe remains below 350°F
(177°C) for 2 hours during a fire up to 1700°F (927°C) when used properly. Your
safe must be closed and latched in order to properly protect the contents from fire.
Moisture Warning
We recommend that you place delicate items such as pictures or intricate jewelry
into an air-tight container before storing them in your safe. Avoid placing your
safe in areas of high humidity. For optimum performance, the safe should be
opened and aired out for at least 20 minutes every two weeks.
Firearms Warning
This safe is not designed to store medication, items with combustible content,
guns or other weapons. Please contact BRK at 800-323-9005 or shop for information about safes that can securely store your
firearms or medication.
Because pearls sustain heat damage at temperatures below 350° F, we advise
that you DO NOT store pearls in this fire safe.
Safe Care and Maintenance
When properly maintained, your safe will continue to provide protection for
many years. In order to ensure optimum performance of your safe, please
follow these simple precautions:
Clean Hands - Do not attempt to operate combination dial if your hands have
excessive dirt, debris, or liquids on them. Under normal circumstances, it is not
necessary to wash your hands before using the safe.
Additional Features: Removable Shelves
Adjustable & Removable Shelves
These models are designed with 5 position adjustable shelves to allow greater
flexibility and further accommodate your particular security storage needs.
To Install:
Your Shelf and Shelf Support Clips have been
shipped inside your safe and wrapped for protection
from damage during shipping.
1. Remove Shelf and (4) Shelf Support Clips
from protective wrapping.
2. Determine the desired position of your shelf
and note the corresponding Support Guide
Slots (2 on each side of interior walls) that
are best suited to support the shelf in that
3. Install the (4) Shelf Support Clips in the same
position on all four support guides.
4. Install shelf into position by placing it inside
the safe (tilting if necessary) at a point above
the desired position.
5. Once inside, lower it into position until
resting on Shelf Support Clips. To change the position of the shelf:
Simply remove the shelf and reposition the (4) shelf
support clips by sliding them up and out of the
support slots and reinstalling them into the new
positions. Then reinstall shelf as described above.
Clean Safe – To clean the outside surface of your safe, it is recommended that
you use a mild cleaner (e.g., window cleaner) to avoid scratching or discoloring
the surface. Do not use abrasive cleansers.
For future reference, store this Operation and Installation Guide in a secure area
away from the safe. DO NOT DISCARD!
If you remove the shelf, it is strongly recommended that you do not
discard it. You may lay the shelf flat in the bottom of the safe to assure
full flexibility in the future.
Home and Office Security Safes
Consumer Affairs
Your Safe’s Unique Identification Numbers
When contacting Consumer Affairs, you should be prepared to supply some
important information that specifically identifies your safe. This information is
extremely important to assuring prompt and accurate customer assistance.
It is strongly recommended that you identify and record the following information
in the “Safe Identification Record” form located on the inside back cover of this
Model Number
Serial Number
Key Number
Consumer Affairs
How to Obtain Warranty Service
If service is required, do not return the product to your retailer. In order to
obtain warranty service, contact the Consumer Affairs Division at 1-800-323-9005,
7:30 am – 5:00 pm Central Standard Time, Monday through Friday. To assist us in
serving you, please have the model number and date of purchase available when
For Warranty Service return to:
BRK Brands, Inc.,
23610 So. Banning Blvd.
Carson, CA 90745
Locating Model and Serial Numbers
Most First Alert® safes include a small metallic silver or gray tag affixed to one
of the surfaces. This tag is usually located on the front or right side of the safe.
This tag contains the Serial Number, and on selected models a similar tag is
attached containing the Model Number. If a Model Number tag is not attached
to the safe, then it can be located on the front or side panel of the box that the
safe was packaged in. Write this number down for future reference.
Key Number
The Key Number is located on the key. If you do not have the key, the
number is also imprinted on the Key lock.
Ordering Replacement Keys
If a key becomes misplaced or you would like additional keys, you may conveniently
purchase them from our Consumer Affairs Department. You must supply the following
information to assure accurate processing:
• Name / Address / Telephone
• Safe Model Number / Serial Number
• Key Number (located on the key and on the Emergency Override Key lock)
• Number of keys requested
• E-mail address if available
Checks or Money Orders are required for orders received by mail and should be made
payable to First Alert. Contact our Consumer Affairs Department for costing information
prior to ordering.
Important: Do Not Remove Tags!
In case your safe becomes inoperable or you lose your keys, these identification
numbers will be needed to correct the problem. It is recommended that the
number tags remain in place on the safe. If removal is necessary, then they
should be attached to the inside back cover of the Operation and Installation
Guide. Store in a safe and secure place for future reference.
Mail to: First Alert
Consumer Affairs
3901 Liberty Street Road
Aurora, IL 60504-8122
Home and Office Security Safes
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF