Fisher-Price C6325 Instruction Sheet

Please keep this instruction sheet for future reference, as it contains important information.

Requires three “AA” batteries (included).

Adult assembly is required for battery replacement.

Tool required for battery replacement:

Phillips screwdriver (not included).

C6325

www.fisher-price.com

Before Use

A plastic tab was attached to the toy for in-store demonstration purposes. While the tab may have already been removed, check the back of the toy to be sure. If the plastic tab is still attached, open the fasteners on the back of the toy and pull and remove the tab. Close the fasteners and throw the plastic tab away.

Battery Replacement

Power/Volume

Switch

Battery Compartment Door

Battery Safety Information

1.5V x 3

“AA” (LR6)

In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin your product.

To avoid battery leakage:

• Do not mix old and new batteries or batteries of different types: alkaline, standard (carbon-zinc) or rechargeable

(nickel-cadmium).

• Insert batteries as indicated inside the battery compartment.

• Remove batteries during long periods of non-use. Always remove exhausted batteries from the product. Dispose of batteries safely. Do not dispose of this product in a fire.

The batteries inside may explode or leak.

• Never short-circuit the battery terminals.

• Use only batteries of the same or equivalent type, as recommended.

• Do not charge non-rechargeable batteries.

• Remove rechargeable batteries from the product before charging.

• If removable, rechargeable batteries are used, they are only to be charged under adult supervision.

For best results, we recommend replacing the batteries that came with this toy with three, new “AA” (LR6) alkaline batteries.

• Open the fasteners on the back of the toy to access the battery compartment.

• Loosen the screws in the battery compartment door with a Phillips screwdriver. Remove the battery compartment door. Throw the exhausted batteries away.

• Insert three, new “AA” (LR6) alkaline batteries.

Hint: We recommend using alkaline batteries for longer battery life.

• If the toy begins to operate erratically you may need to reset the electronics. Slide the power/volume switch on the back of the toy off and then back on.

• When sounds become faint or stop, it’s time for an adult to change the batteries!

• Replace the battery compartment door and tighten the screws with a Phillips screwdriver. Do not over-tighten.

• Close the fasteners on the toy.

• Protect the environment by not disposing of this product with household waste (2002/96/EC).

Check your local authority for recycling advice and facilities (Europe only).

2 Interactive Play Modes!

• Open the fasteners on the back of the toy and slide the power/volume to either on with low volume ; on with high volume ; or off .

• Locate the mode select switch on puppy's right foot.

• Press the right foot to turn the toy on and start in learning mode. Press again for music mode. Press once more to turn the toy off.

Mode Select

Learning Mode

• Press the puppy's left foot, right hand, heart, tummy or left ear to hear it identified followed by a short ditty.

Press again to learn a color.

• Press the note button on the puppy's left hand to hear fun learning songs.

Music Mode

• Press the puppy's left foot, left ear, heart or hands to hear a fun song. Press again to hear a fun phrase.

• Press the puppy's tummy to hear another fun song.

Press again to hear the puppy giggle and bark.

Consumer Information

Care

• Wipe this toy with a clean cloth dampened with a mild soap and water solution. Do not immerse this toy.

• This toy has no consumer serviceable parts. Do not take this toy apart.

FCC Statement (United States Only)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Consult the dealer or an experienced radio/TV technician for help.

Note: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.

Fisher Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.

©2008 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.

C6325pr-0923

PRINTED IN CHINA