CMX16A Manual
C M X - 1 6 A S P E C I F I C AT I O N S
1. INPUT SECTION
Input
Connector
Input Impedance
Nominal Level
Max Level
XLR
>1.3K Ω
+2 dBm
+14 dBm
MONO CH LINE
1/4" TRS
>10K Ω
+4 dBm
+22 dBm
STEREO CH LINE
1/4" TRS
>10K Ω
+4 dBm
+22 dBm
RCA PIN JACKS
>10K Ω
+2 dBm
+22 dBm
1/4" TS
>10K Ω
+4 dBm
+22 dBm
1/4" TRS
>10K Ω
+4 dBm
+22 dBm
MONO CH MIC
TAPE IN
AUX RETURNS
INSERT IN
2. OUTPUT SECTION
Output
Connector
Output Impedance
Nominal Level
Max Level
XLR & 1/4" TS
120 Ω
+4~+6 dBm
+22 dBm
1/4" TS
120 Ω
+4~+6 dBm
+20 dBm
G1-G2 OUT
1/4"TRS
120 Ω
+4~+6 dBm
+22 dBm
INSERT OUT
1/4" TRS
120 Ω
+4~+6 dBm
+22 dBm
1/4" TS
1K Ω
+4~+6 dBm
+22 dBm
RCA PIN JACKS
1K Ω
+4~+6 dBm
+22 dBm
1/4" TRS
200 Ω
–––
40mW X 2
STEREO OUT L/R
AUX SENDS 1,2
CNTRL R. OUT
REC OUT
PHONES
3. FREQUENCY RESPONSE
8. HUM AND NOISE
ANY INPUT TO
ANY OUTPUT ....................20 Hz to 20 KHz =/- 3dB @ 0 dBm
20 Hz-20 Khz, Rs=150 ohms, input TRIM @ 0 dB, input sensitivity at –60 dB
EQUIVALENT INPUT NOISE ....................................-129 dBm
RESIDUAL OUTPUT NOISE........................................-85 dBm
4. TOTAL HARMONIC DISTORTION
ANY INPUT TO
ANY OUTPUT ..............0.02%, 20 Hz-20 KHz @ 1Khz, 0 dBm
9. VU METERS
10-segment LED X 2, L/G1, R/G2
5. INPUT CHANNEL EQUALIZATION
High shelving ....................12 kHz, +/- 15 dB, Q fixed at 2 oct.
Mid bell ............................2.5 khZ, +/- 15 dB, Q fixed at 1 oct.
Low shelving ......................80 Hz, +/- 15 dB, Q fixed at 2 oct.
10. PHANTOM POWER
6. GAIN CONTROL RANGE
External PSU, 120 VAC/60Hz or 230 VAC/50Hz
Input channel trim control....Stop to stop- Mic +10 dB~+60 dB,
Line ..................................................................+10 dB~+40 dB
Channel/Master Faders ...................................... -∞ to +15 dB
Aux Send/Aux Master Send ................................Off to +15 dB
Aux Return ..............................................Off to Unity to +20 dB
Tape In Level Control ..........................................Off to +15 dB
12. POWER CONSUMPTION
+48 VDC, globally selected
11. POWER REQUIREMENTS
40 Watts, External PSU
13. DIMENSIONS AND WEIGHT
15" x 17.5" x 3.75" (381 x 495 x 95 mm), 14.85 lbs (6.75 Kg),
External PSU not included
7. CROSSTALK @ 1KHZ
ADJACENT CHANNEL INPUTS ......................-78 dB~-68 dB
INPUT TO OUTPUT .......................................... -78 dB~-68 dB
The specifications above are correct at the time of printing of this manual. For improvement purposes, all specifications for this unit,
including design and appearance, are subject to change without prior notice.
13
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement