Fisher-Price | R4749 | Instruction Sheet | Fisher-Price R4749 Instruction Sheet

Fisher-Price R4749 Instruction Sheet
R4749
1
www.fisher-price.com
Consumer
Information
Battery Safety
Information
In exceptional circumstances, batteries
may leak fluids that can cause a chemical
burn injury or ruin your product. To avoid
battery leakage:
• Do not mix old and new batteries or
batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable
(nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods
of non-use. Always remove exhausted
batteries from the product. Dispose of
batteries safely. Do not dispose of this
product in a fire. The batteries inside
may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-rechargeable
batteries.
• Remove rechargeable batteries from the
product before charging.
• If removable, rechargeable batteries are
used, they are only to be charged under
adult supervision.
WARNING
Prevent Entanglement Injury
• This product may not attach
to all crib designs. Do not
add additional strings or
straps to attach to a crib
or playpen.
• Use ONLY attached to a crib.
• Please keep this instruction sheet
for future reference, as it contains
important information.
• Requires four “C” batteries (included)
and two “AAA” (LR03) alkaline batteries
(not included) for operation.
• Adult assembly is required for
battery installation.
• Tool required for battery installation:
Phillips screwdriver (not included).
2
Soother Battery
Replacement
Remote Battery
Installation
1.5V x 2
“AAA” (LR03)
1.5V x 4
"C" (LR14)
• Locate the battery compartment on the
back of the remote.
• Loosen the screw in the battery compartment door and remove the door.
• Insert two, new “AAA” (LR03)
alkaline batteries.
Hint: We recommend alkaline batteries
for longer battery life.
• Replace the battery compartment door
and tighten the screw.
• If the remote begins to operate erratically,
you may need to reset the electronics.
Remove the batteries and replace them.
For best performance, we recommend
replacing the batteries that came with
the soother with four, new “C” (LR14)
alkaline batteries.
• Locate the battery compartment on the
back of the soother.
• Loosen the screws in the battery compartment door and remove the door.
• Remove the exhausted batteries and
throw them away.
• Insert four, new “C” (LR14)
alkaline batteries.
Hint: We recommend alkaline batteries
for longer battery life.
• Replace the battery compartment door
and tighten the screws.
• If the soother begins to operate
erratically, you may need to reset the
electronics. Slide the power/volume
switch off and then back on.
IMPORTANT! Under normal use conditions,
the batteries in the soother will require
replacement more often than the batteries
in the remote. When sounds and lights from
this toy become faint or stop, it’s time for
an adult to change the batteries.
3
Consumer Information
FCC Statement (United States Only)
This equipment has been tested and found
to comply with the limits for a Class B
digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against
harmful interference in a residential
installation. This equipment generates, uses
and can radiate radio frequency energy
and, if not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct the
interference by one or more of the following
measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between the
equipment and receiver.
• Consult the dealer or an experienced
radio/TV technician for help.
Note: Changes or modifications not
expressly approved by the manufacturer
responsible for compliance could void the
user’s authority to operate the equipment.
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) this device
may not cause harmful interference and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
CONSUMER ASSISTANCE
1-800-432-5437 (US & Canada)
1300 135 312 (Australia)
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2; www.service.mattel.com.
Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
www.service.mattel.com/uk
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.
ICES-003
This Class B digital apparatus complies with
Canadian ICES-003. Operation is subject to
the following two conditions: (1) this device
may not cause harmful interference and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
NMB-003
Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
L’utilisation de ce dispositif est autorisée
seulement aux conditions suivantes:
(1) il ne doit pas produire de brouillage et
(2) l’utilisateur du dispositif doit être prêt
à accepter tout brouillage radioélectrique
reçu, meme si ce brouillage est susceptible
de compromettre le fonctionnement du
dispositif.
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
©2009 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
4
R4749pr-0920
PRINTED IN CHINA
Crib Attachment
IMPORTANT! Always attach all provided
fasteners (strings, straps, clamps, etc.)
tightly to a crib or playpen according to
the instructions. Do not add additional
strings or straps to attach to a crib.
Check frequently.
ibb Spindle
Spindle
Crib
Attachment Strap
Crib Rail
21
Peg
• Tie the toy’s strings to a crib spindle.
NOTE: It is better to tie the strings in a
knot than a bow, since a bow may be
easily untied.
Slot
ott
Tab
11
IMPORTANT! If you are attaching this toy
to a crib side rail that can be lowered and
raised, make sure the crib side rail is in the
raised (locked) position whenever a child is
in the crib.
• Position the toy inside the crib.
• Wrap the attachment strap around the
top of the crib rail.
• Slide the end of the attachment strap
under the tabs on the back of the toy.
• Fasten the attachment strap slot to the
peg on the back of the toy.
7" (18cm)
31
NOTE: This toy should be snug against the
crib rail and spindles. Use the strap slot that
provides the tightest fit.
• Make sure the distance between the
bottom of the product and the crib
mattress is at least 7 inches (18cm).
• If the distance is less than 7 inches
(18cm), readjust the attachment strap to
lift the product; or lower the crib mattress.
5
Use
Remote
IMPORTANT!
• In the unlikely event that use of the
remote interferes with normal use of
other remote controlled equipment, such
as televisions, stereos, or use of other
electronic or battery powered appliances
interfere with operation of the soother, do
not use both as the same time.
• For best performance between the soother
and the remote, avoid using the remote
in areas of bright light. In bright natural
or artificial light, you may notice loss of
range. Move the soother, or reduce the
amount of light, to improve performance.
• When using the remote, make sure the
arrow on the soother is pointing towards
the transmitter window on the remote. For
best results, make sure the path between
the transmitter window on the remote and
the soother are in a direct line and free
of obstacles. Position the soother so the
arrow points to an area that you are mostly
likely to use the remote.
6
Soothing Sounds
Song S
Select
ele Button
ele
el
• Slide the power/volume switch on the
soother to ON with low volume
or
ON with high volume
. When you
are finished using this product, slide
the power/volume switch OFF .
• Slide the mode switch to:
turns
on sounds, lights and projector;
turns on sounds and lights;
turns on
sounds only.
Power/Volume Switch
Mode Switch
• Press the song select button to change
the song.
7
Care
• Wipe this toy with a clean cloth
dampened with a mild soap and water
solution. Do not immerse this toy.
• This toy has no consumer serviceable
parts. Do not take this toy apart.
• Protect the environment by not disposing
of this product with household waste
(2002/96/EC). Check your local authority
for recycling advice and facilities
(Europe only).
8
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising