Fisher-Price | T4265 | Instruction Sheet | Fisher-Price T4265 Instruction Sheet

Fisher-Price T4265 Instruction Sheet
T4265
Please keep this instruction sheet for future reference,
as it contains important information.
Requires three “D” (LR20) alkaline batteries for mobile
operation and two "AAA" (LR03) alkaline batteries for
remote operation (batteries not included).
Adult assembly is required.
Tool required for assembly: Phillips screwdriver (not included).
www.fisher-price.com
Consumer Information
WARNING
Prevent Entanglement Injury
• Keep mobile out of baby’s reach.
• Remove mobile portion of product from crib or playpen
when baby begins to push up on hands and knees.
• This product may not attach to all crib designs. Do not add
additional strings or straps to attach to crib or playpen.
• Use ONLY attached to a crib or playpen.
IMPORTANT! Always attach with all provided fasteners tightly to a crib or playpen according to the
instructions. Do not add additional strings or straps to attach to a crib. Check frequently.
• The mobile portion of this product may be used from birth until 5 months.
• The base portion of this product may be used from birth until 36 months.
• A crib mobile is intended for visual stimulation and is not to be grasped by a child.
• Wipe this toy with a clean cloth dampened with a mild soap and water solution. Do not
immerse this toy. The soft toys are surface washable.
• This toy has no consumer serviceable parts. Do not take this toy apart.
• If this product begins to operate erratically, you may need to reset the electronics.
Slide the power/volume switch on the mobile base off and then back on. Remove the
batteries from the remote and replace them.
• Protect the environment by not disposing of this product with household waste
(2002/96/EC). Check your local authority for recycling advice and facilities
(Europe only).
Battery Safety Information
In exceptional circumstances, batteries may leak fluids that can cause a chemical
burn injury or ruin your product. To avoid battery leakage:
• Do not mix old and new batteries or batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the battery compartment.
• Remove batteries during long periods of non-use. Always remove exhausted batteries
from the product. Dispose of batteries safely. Do not dispose of product in a fire.
The batteries inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the product before charging.
• If removable, rechargeable batteries are used, they are only to be charged under adult supervision.
2
Parts
Mobile Hub
3 Long Spokes
Arm
3 Short Spokes
Crib Connector
Remote
Base
Note: All of the screws used to assemble this toy are attached to the product.
Follow these instructions carefully to fully secure the screws. Tighten and loosen all
screws with a Phillips screwdriver. Do not over-tighten the screws.
3
Battery Installation
Hint: We recommend using alkaline batteries for longer battery life.
1,5V x 3
“D” (LR20)
Mobile Base
• Loosen the screws in the battery compartment door with a Phillips screwdriver. Remove
the battery compartment door.
• Insert three “D” (LR20) alkaline batteries.
• Replace the battery compartment door and tighten the screws.
IMPORTANT! Under normal use conditions, the batteries in the mobile base will require
replacement more often than the batteries in the remote. When sounds or lights become
faint or stop, it’s time for an adult to change the batteries.
1,5V x 2
"AAA" (LR03)
Remote
• Loosen the screw in the battery compartment door with a Phillips screwdriver. Remove
the battery compartment door.
• Insert two "AAA" (LR03) alkaline batteries.
• Replace the battery compartment door and tighten the screw.
4
Assembly
Base
Crib Connector
11
• Fit the crib connector to the base and tighten both screws.
IMPORTANT! Make sure the straps are over the top of the crib connector.
PRESS
A
SLIDE
Arm
B
Socket
21
• First, press the button on the mobile base, next to the
socket A and then slide the socket door open B .
• Fit the arm into the socket in the base and tighten
both screws.
5
Assembly
Arm
Socket
31
• Fit the end of the arm to the socket on the mobile hub.
• Tighten both screws in the arm to secure the mobile hub.
Long Spoke
41
• Attach a long spoke to the mobile hub, as shown.
• Tighten the screw in the long spoke.
• Repeat this procedure to attach the remaining long spokes to the mobile hub.
6
Assembly
Short Spoke
51
• Attach a short spoke to the mobile hub, as shown.
• Tighten the screw in the short spoke.
• Repeat this procedure to attach the remaining short spokes to the mobile hub.
7
Consumer Information
FCC Statement (United States Only)
This equipment has been tested and found
to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and
can radiate radio frequency energy and,
if not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct the
interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Consult the dealer or an experienced
radio/TV technician for help.
Note: Changes or modifications not
expressly approved by the manufacturer
responsible for compliance could void the
user’s authority to operate the equipment.
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) this device
may not cause harmful interference and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
CONSUMER ASSISTANCE
1-800-432-5437 (US & Canada)
1300 135 312 (Australia)
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2; www.service.mattel.com.
Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
www.service.mattel.com/uk
Mattel Europa, B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.
ICES-003
This Class B digital apparatus complies with
Canadian ICES-003.
Operation is subject to the following two
conditions: (1) this device may not cause
harmful interference and (2) this device
must accept any interference received,
including interference that may cause
undesired operation.
NMB-003
Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
L’utilisation de ce dispositif est autorisée
seulement aux conditions suivantes:
(1) il ne doit pas produire de brouillage et
(2) l’utilisateur du dispositif doit être prêt
à accepter tout brouillage radioélectrique
reçu, même si ce brouillage est susceptible
de compromettre le fonctionnement
du dispositif.
Fisher Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
©2009 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
8
T4265pr-0920
PRINTED IN CHINA
Crib Attachment
WARNING
Prevent Entanglement Injury
• Keep mobile out of baby’s reach.
• Remove mobile portion of product from crib or playpen
when baby begins to push up on hands and knees.
• This product may not attach to all crib designs. Do not add
additional strings or straps to attach to crib or playpen.
• Use ONLY attached to a crib or playpen.
IMPORTANT! If you are attaching this toy to a crib side rail that can be lowered and raised,
make sure the crib side rail is in the raised (locked) position whenever a child is in the crib.
Crib Top Rail
Base
Buckles
11
• Position the base so that the decorated side faces the inside of the crib.
• Fit the base onto the crib top rail.
Hint: The base is designed to fit most crib designs. Please refer to the main illustration
and the inset photograph.
• Make sure the top strap is hanging over the crib top rail. Pull the bottom strap through
the crib rails.
• Buckle the straps. Make sure you hear a “click”.
9
Crib Attachment
21
• Make sure the straps are tightened securely around the crib rail.
• While pushing the tab at the bottom of the buckle, pull the free end of the strap to
tighten on the rail.
Hint: You can secure the free end of the strap to the base.
10
Crib Attachment
31
• Tie the base strings to a crib spindle.
Note: It is better the tie the strings in a knot than a bow, since a bow may be easily untied.
Bottom of Base
At Least 7 Inches (18 cm)
Mattress
41
• If the distance between the base and the mattress is less than 7 Inches (18 cm),
lower the crib mattress.
11
Use
IMPORTANT!
• In the unlikely event that use of the remote interferes with normal use of other remote
controlled equipment, such as televisions, stereos, or use of other electronic or battery
powered appliances interfere with operation of the mobile, do not use both appliances
at the same time.
• For best performance between the mobile and the remote, avoid using the remote in
areas of bright light. In bright natural or artificial light, you may notice loss of range.
Move the mobile or otherwise reduce the amount of light to improve performance.
Remote
• When using the remote, make sure that the arrow on the mobile base is pointing towards
the transmitter window on the remote. For best results make sure the path between the
transmitter window on the remote and the mobile base are in a direct line and free of
obstacles. Position the mobile base so that the arrow points to the area from which
you’re most likely to use the remote.
12
Use
Light Control Button
• Press to turn on the night light.
• Press the button again to turn the
night light off.
Hint: Make sure the mobile power
is on.
Power/Volume Switch
• Slide the switch to ON with
or ON with high
low volume
. When finished using
volume
the product, slide the switch
OFF .
Mode Select Switch
Slide the switch to select a mode:
Music and Motion
Music only
Music Buttons
Press the buttons to select music
from Beethoven or Mozart,
or ocean sounds.
13
Convert to Night Light
Remove the mobile and use as a music box with a night light!
• Loosen both screws in the arm near the
mobile base. Lift and remove the arm.
• Close the socket door on top of the
mobile base.
• Store the mobile in a safe place for
future use.
14
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising