Yamaha | HTR-3063 | Owner's Manual | Yamaha HTR-3063 Owner's manual

Owner’s Manual
AV Receiver
English for North America
CONTENTS
INTRODUCTION
Features and capabilities ................................................... 3
About this manual............................................................. 4
Supplied accessories......................................................... 4
Part names and functions.................................................. 5
Front panel........................................................................ 5
Rear panel......................................................................... 6
Front panel display ........................................................... 7
Remote control ................................................................. 8
CONNECTIONS
Connecting speakers .......................................................... 9
Speaker channels and functions........................................ 9
Speaker layout ................................................................ 10
Connecting speakers....................................................... 10
Connecting external devices............................................ 13
Cable plugs and jacks ..................................................... 13
Connecting a TV monitor............................................... 14
Connecting BD/DVD players and other devices ............ 16
Connecting video cameras and portable audio players .. 20
Transmitting input A/V to external devices.................... 20
Enjoying sound field programs ...................................... 26
Selecting sound field programs and sound decoders ..... 26
Sound field programs ..................................................... 28
FM/AM tuning ................................................................. 30
Selecting a frequency for reception (Normal tuning)..... 30
Registering and recalling a frequency (Preset tuning) ... 31
Clearing preset stations .................................................. 32
Playing back tunes from your iPod™/iPhone™ ........... 33
Connecting the Yamaha iPod universal dock ................. 33
Controlling an iPod/iPhone ............................................ 33
Playing back tunes from Bluetooth™ components....... 35
Connecting a Yamaha Bluetooth wireless
audio receiver ................................................................. 35
Pairing Bluetooth™ components ................................... 35
Using Bluetooth™ components ..................................... 36
SETUP
Configuring the settings specific for each input source
(Option menu) .................................................................. 37
Option menu display and setup ...................................... 37
Option menu items ......................................................... 37
Setting up speaker parameters ....................................... 22
STEP 1: Display the setting menu.................................. 22
STEP 2: Set the speaker status and size ......................... 22
STEP 3: Set the distance from the listening point.......... 23
STEP 4: Playback a test tone.......................................... 24
STEP 5: Adjust the volume ............................................ 24
Setting various functions (Setup menu)......................... 40
Setup menu display and settings .................................... 40
Setup menu items ........................................................... 40
Manages settings for speakers........................................ 41
Setting the audio output function of this unit................. 44
Making the receiver easier to use ................................... 46
Setting sound field program parameters......................... 47
Prohibiting setting changes ............................................ 47
PLAYBACK
Setting sound field program parameters ....................... 48
Setting sound field parameters ....................................... 48
Connecting the FM/AM antennas .................................. 21
Basic playback procedure ............................................... 25
Adjusting high/low-frequency sound (Tone control) ..... 25
Changing input settings with a single key
(SCENE function) ............................................................ 26
Registering input sources/sound field program .............. 26
Resetting all remote control codes ................................. 52
Extended functionality that can be configured
as needed (Advanced Setup menu) ................................ 53
Displaying/Setting the Advanced Setup menu............... 53
Setting the impedance of speakers ................................. 53
Avoiding crossing remote control signals when using
multiple Yamaha receivers ............................................. 54
Initializing various settings for this unit ........................ 54
APPENDIX
Troubleshooting ............................................................... 55
General ........................................................................... 55
HDMI™ ......................................................................... 57
Tuner (FM/AM) ............................................................. 58
Remote control............................................................... 59
iPod™/iPhone™ ............................................................ 59
Bluetooth™ .................................................................... 60
Glossary ............................................................................ 61
Audio information.......................................................... 61
Sound field program information................................... 61
Video information .......................................................... 62
Information on HDMI™................................................. 63
About trademarks ........................................................... 63
Specifications.................................................................... 64
Index ................................................................................. 65
Controlling other components with the
remote control .................................................................. 50
Keys connecting external components ........................... 50
Default remote control code settings.............................. 50
Registering remote control codes for external
component operations .................................................... 51
En
2
INTRODUCTION
Features and capabilities
■ Built-in high-quality, high-power 5-channel amplifier
■ 1-button input/sound field program switching (SCENE function) .......................26
■ Speaker connections for 2- to 5.1-channel configurations
–
–
–
–
–
Speaker channels and functions .................................................................................................................9
Speaker layout..........................................................................................................................................10
Speaker cable connection.........................................................................................................................10
Speaker impedance configuration............................................................................................................10
Subwoofer cable connection ....................................................................................................................12
■ Acoustic parameter adjustment to match your speakers and listening
environment
–
–
–
–
–
–
–
Setting for speaker acoustic parameters...................................................................................................22
Specifying the settings for each speaker..................................................................................................41
Volume control for each speaker..............................................................................................................42
Speaker distance settings .........................................................................................................................42
Sound quality control with the equalizer <Graphic Equalizer> ..............................................................43
Test tone speaker adjustment ...................................................................................................................43
Bass and treble level adjustment <Tone Control> ...................................................................................25
■ External device connection and playback
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Cables and input/output jacks for this unit ..............................................................................................13
TV connection..........................................................................................................................................14
TV audio playback through this receiver.................................................................................................15
Connections for BD/DVD players (recorders) and other devices............................................................16
Audio signal output to the TV connected via the HDMI jack .................................................................45
Correction of lag between audio and video signals <Lipsync>...............................................................44
External audio and video recorder connections .......................................................................................20
HDMI/AV video input combining other audio input...............................................................................38
Front panel external device connections (for video cameras, portable music players, etc.)....................20
Protective cover for front panel jacks ........................................................................................................4
Changing the input source names <Input Rename> ................................................................................46
Configuring the settings specific for each input source <Option menu> ................................................37
Playback from external devices ...............................................................................................................25
Playback from an iPod/iPhone (iPod/iPhone and components sold separately) .....................................33
Playback from a Bluetooth component (Bluetooth and components sold separately) ............................35
■ Multi-channel, multi-format playback
–
–
–
–
–
Sound field effect selection......................................................................................................................26
Playback without sound field effects .......................................................................................................27
Stereo playback........................................................................................................................................27
Sound field effect configuration ..............................................................................................................48
Compressed-music playback ...................................................................................................................26
■ Front panel information display
– Front panel display information switching ................................................................................................7
– Front panel display brightness adjustment <Dimmer>............................................................................47
– Digital video/audio signal information display <Signal Info> ................................................................38
■ Volume/sound quality adjustment functions
–
–
–
–
Easy listening at low volumes <Adaptive DRC> ....................................................................................44
Maximum volume settings.......................................................................................................................45
Startup volume settings............................................................................................................................45
Adjusting volume between input sources <Volume Trim> .....................................................................37
■ Remote control operation
–
–
–
–
Remote control names and functions.........................................................................................................8
Insert batteries into the remote control ......................................................................................................4
External device operation with this unit’s remote control .......................................................................50
Multiple Yamaha receiver operation without signal interference <Remote ID Switching>....................54
■ Other features
–
–
–
–
–
Standby mode after prolonged non-operation <Auto Power Down function>........................................47
Standby mode after a specific amount of time <Sleep timer>...................................................................8
To charge the iPod/iPhone when this unit is in standby mode <iPod Standby Charge> .........................34
Initializing various settings for this unit ..................................................................................................54
Prohibiting setting changes <Memory Guard>........................................................................................47
■ FM/AM Tuner
– FM/AM broadcast listening .....................................................................................................................30
– Simple preset tuning ................................................................................................................................31
En
3
INTRODUCTION
Features and capabilities
About this manual
• This manual is printed prior to production. Design and
specifications are subject to change in part as a result of
improvements, etc. In case of differences between the manual and
product, the product has priority.
• “dHDMI1” (example) indicates the name of the parts on the
remote control. Refer to the “Part names and functions” (☞p. 5)
for the information about each position of the parts.
• J1 indicates that the reference is in the footnote. Refer to the
corresponding numbers on the bottom of the page.
• ☞ indicates the page describing the related information.
• Click on the “
” at the bottom of the page to display the
corresponding page in “Part names and functions.”
Front panel
Rear panel
Front panel display
Remote control
■ Attaching the VIDEO AUX input cover (included)
■ Installing batteries in the remote control
To protect against dust, attach the supplied VIDEO AUX input
cover to the VIDEO AUX jacks when you do not use the jacks.
To remove the cover, push the left section of it.
When inserting batteries in the remote control, remove the
battery compartment cover from the reverse side of the remote
control, and insert two AAA batteries into the battery
compartment so that they match with the polarity markings (+
and -).
a
Battery compartment
cover
c
b
Attach the cover
Battery compartment
Replace the batteries with new ones if the following symptoms
become evident:
• The remote control can only be operated within a narrow range.
• bTRANSMIT does not light up, or only lights dimly.
Supplied accessories
PUSH
Check that you received all of the following parts.
NOTE
•
•
•
•
•
If there are remote control codes for external components
registered to the remote control, removing the batteries for more
than two minutes, or leaving exhausted batteries in the remote
control, the remote control codes may be cleared. If this should
occur, replace the batteries with new ones, and set the remote
control codes.
Remote control
Batteries (AAA, R03, UM-4) x 2
AM loop antenna
Indoor FM antenna
VIDEO AUX input cover
Remove the cover
En
4
INTRODUCTION
Part names and functions
g TUNING jj / ii
Front panel
h
a A (Power)
b
c
d
e
f
Switches this unit between on and standby modes.
INFO
Changes the information shown on the front panel display (☞p. 7).
MEMORY
Registers FM/AM stations as preset stations (☞p. 32). J1
PRESET j / i
Selects an FM/AM preset station (☞p. 32). J1
FM
Sets the FM/AM tuner band to FM (☞p. 30). J1
AM
Sets the FM/AM tuner band to AM (☞p. 30). J1
a
i
j
k
l TONE CONTROL
Changes FM/AM tuner frequencies (☞p. 30). J1
Front panel display
Displays information on this unit (☞p. 7).
PHONES jack
For plugging headphones in. Sound effects applied during playback
can also be heard through the headphones.
INPUT l / h
Selects an input source from which to playback. Press either the left or
right key repeatedly to cycle through the input sources in order.
SCENE
Switches the input source and the sound field program with a single
button (☞p. 26). Press this key when this unit is in standby mode to
switch on the unit.
m
n
o
p
b
c
d
e
f
g
INFO
MEMORY
PRESET
FM
AM
TUNING
Adjusts high-frequency/low-frequency output of speakers/headphones
(☞p. 25).
PROGRAM l / h
Switches between the sound field effect (sound field program) you are
using and the surround sound decoder (☞p. 26). Press either the left
or right key repeatedly to cycle through the input sources in order.
STRAIGHT
Changes a sound field program to straight decoding mode (☞p. 27).
VIDEO AUX jacks
For connecting video cameras, game consoles, and portable music
players to this unit temporarily.
Attach the supplied VIDEO AUX input cover when not using this
jack.
VOLUME
Adjusts the volume level.
h
VOLUME
SCENE
BD
DVD
PHONES
INPUT
TONE CONTROL
TV
CD
PROGRAM
RADIO
SILENT CINEMA
i
VIDEO AUX
STRAIGHT
PORTABLE
j
k l
m
n
VIDEO
o
L
AUDIO
R
p
J 1 : Usable when you have selected tuner input.
En
5
INTRODUCTION
Part names and functions
d ANTENNA jacks
Rear panel
e
a DOCK jack
b
c
For connecting an optional Yamaha iPod universal dock (such as
YDS-12) or Bluetooth wireless audio receiver (YBA-10) (☞p. 33,
☞p. 35).
HDMI OUT jack
For connecting an HDMI - compatible TV to output audio/video
signals to (☞p. 14).
HDMI1-4 jacks
For connecting external components equipped with HDMIcompatible outputs to receive audio/video signals from (☞p. 16).
a
DOCK
b
f
g
h
c
HDMI 3
HDMI 4
FM
GND AM
COMPONENT
VIDEO
PR
PR
PB
PB
k
l
m
Distinguishing the input and output jacks
The area around the audio/video output jacks is
marked in white to prevent connection errors.
Use these jacks to output audio/video signals
to a TV or other external component.
ANTENNA
HDMI 2
HDMI 1
j
For connecting a TV capable of receiving video input, and outputting
video signals to it (☞p. 15).
AUDIO OUT jacks
For outputting audio signals received when analog inputs such as the
AV5 or AUDIO1-2 jacks are selected (☞p. 20).
SUBWOOFER jack
For connecting a subwoofer with a built-in amplifier (☞p. 12).
SPEAKER terminals
For connecting the front, center, and surround speakers (☞p. 12).
Power cord
For connecting this unit to an AC wall outlet.
d
(BD/DVD)
HDMI OUT
i MONITOR OUT jack
For connecting AM and FM antennas (☞p. 21).
COMPONENT VIDEO jacks
For connecting TV that are compatible with component video signals,
using three cables to output video signal (☞p. 14).
AV1-5 jacks
For connecting to external devices equipped with audio/video outputs
so that this unit can receive audio/video signals (☞p. 17, p. 18).
AV OUT jacks
For outputting audio/video signals received when analog inputs (AV35 or AUDIO1-2) are selected (☞p. 20).
AUDIO1-2 jacks
For connecting to external components equipped with analog audio
outputs to input sound into this unit (☞p. 19).
Output jacks
SPEAKERS
FRONT
SURROUND
Y
MONITOR OUT
Y
COMPONENT
VIDEO
CENTER
MONITOR OUT
VIDEO
DOCK
ANTENNA
(BD/DVD)
HDMI OUT
HDMI 2
HDMI 1
HDMI 3
HDMI 4
FM
GND
COMPONENT
VIDEO
PR
PR
PB
PB
SURROU
Y
MONITOR OUT
OPTICAL
AV 1
COAXIAL
AV 2
COAXIAL
OPTICAL
(CD)
( TV )
AV 3
AV 4
AV 5
AV
OUT
AUDIO 1
AUDIO 2
AUDIO
OUT
Y
COMPONENT
VIDEO
SUBWOOFER
OPTICAL
AV 1
e
f
g
h
MONITOR OUT
VIDEO
j ik
l
COAXIAL
AV 2
COAXIAL
OPTICAL
(CD)
( TV )
AV 3
AV 4
AV 5
AV
OUT
SUBWOOFER
AUDIO 1
AUDIO 2
m
En
6
INTRODUCTION
Part names and functions
f MUTE indicator
Front panel display
a HDMI indicator
b
c
d
e
■ Changing the front panel display
Flashes when audio is muted.
g VOLUME indicator
Lights up during normal HDMI communication when any of the
HDMI 1-4 inputs are selected.
CINEMA DSP indicator
Lights up when a sound field effect that uses CINEMA DSP
technology is selected.
Tuner indicator
Lights up when receiving an FM/AM broadcast.
iPod CHARGE indicator
Lights up when an iPod/iPhone is connected through an optional
Yamaha iPod universal dock (such as YDS-12), and the iPod Standby
Charge function is active (☞p. 34).
SLEEP indicator
Lights up when the sleep timer is activated (☞p. 8).
h
i
j
The front panel can display sound field programs and surround
decoder names as well as the active input source.
Press fINFO repeatedly to cycle through input source →
sound field program → surround decoder in order. J1
Displays the current volume level.
Cursor indicators
Light up if corresponding cursors on the remote control are available
for operations.
Multi information display
Displays a range of information on menu items and settings.
Speaker indicators
Indicate speaker terminals from which signals are output.
Input source name
HDMI1
VOL.
Straight
Subwoofer
Front speaker L
Surround speaker L
a
L
SL
b
SW
C
Center speaker
R
SR
c
STEREO
TUNED
i
SW
C
R
SR
Sound field program (DSP program)
Front speaker R
Surround speaker R
d
e
iPod CHARGE
SLEEP
f
g
VOL.
MUTE
L
SL
h
L
SL
h
SW
C
R
SR
j
J 1 : While selecting a tuner input, the FM/AM frequency is displayed instead of the input source.
En
7
INTRODUCTION
Part names and functions
a Remote control signal transmitter
Remote control
Transmits infrared signals.
b TRANSMIT
c SOURCE A (SOURCE Power)
b
c
Switches an external component on and off.
CODE SET
TRANSMIT
n
SOURCE
RECEIVER
SLEEP
p
HDMI
1
2
1
2
3
4
3
4
o
AV
d
AUDIO
5
V-AUX
[ A ]
1
2
[ B ]
DOCK
FM
AM
PRESET
f
INFO
TUNING
TUNER
MEMORY
g
MUSIC
SCENE
h
TV
CD
SETUP
RADIO
q
OPTION
i
VOLUME
ENTER
j
RETURN
TOP
MENU
POP-UP
MENU
MUTE
s
Sets the FM/AM tuner band to FM.
Sets the FM/AM tuner band to AM.
Presets radio stations.
Selects a preset station.
Changes tuning frequencies.
k
Cycles the information displayed on the front panel display (the name
of the currently selected input source, the sound field program, the
surround decoder, the FM/AM tuner frequency, etc.)(☞p. 7).
Switch between the sound field effect (sound field program) you are
using and the surround decoder (☞p. 26).
1
2
3
4
5
6
7
8
9
0
10
ENT
k External component operation keys
Operate recording, playback, and menu displays etc. for external
components. J1
l Numeric keys
Enter numbers.
m TV control keys
Operate a monitor such as a TV.
n CODE SET
Sets remote control codes for external component operations (☞p. 50,
p. 54).
Switches this unit between on and standby modes.
p SLEEP
Sets this unit to place itself in standby mode automatically after a
specified period of time has elapsed (sleep timer). Press this key
repeatedly to set the time for the sleep timer function. The front panel
display indicator lights up when the sleep timer is activated.
f INFO
g Sound selection keys
REC
l
r
DISPLAY
FM
AM
MEMORY
PRESET F / G
TUNING H / I
Cursor B / C / D / E Select menu items and change settings when
settings menus, etc are displayed.
ENTER
Confirms a selected item.
RETURN
Returns to the previous screen when setting
menus are displayed, or ends the menu display.
o RECEIVER A (RECEIVER Power)
Operates the FM/AM tuner. These keys are used when using the tuner
input.
STEREO
STRAIGHT
BD
DVD
HDMI1-4 jacks
AV1-5 jacks
AUDIO1-2 jacks
Front panel VIDEO AUX jacks
Changes the external component you operating
with the kExternal component operation
keys without changing inputs. J1
A Yamaha iPod universal dock or Bluetooth
wireless audio receiver connected to the DOCK
jack.
FM/AM tuner
e Tuner keys
ENHANCER SUR. DECODE
MOVIE
Select an input source on this unit from which to playback.
DOCK
TUNER
e
d Input selector
HDMI1-4
AV1-5
AUDIO1-2
V-AUX
[A]/[B]
Displays a detailed Setup menu for this unit (☞p. 40).
j Cursor B / C / D / E, ENTER, RETURN
Lights up when a signal is output from the remote control.
a
i SETUP
h SCENE
Switches the input source and the sound field program with a single
button (☞p. 26). Press this key when this unit is in standby mode to
switch on the unit.
Sleep 120min.
Sleep Off
Sleep 90min.
Sleep 30min.
Sleep 60min.
q OPTION
Displays the Option menu for each input source (☞p. 37).
r VOLUME +/Adjusts the volume level (☞p. 25).
s MUTE
Turns the mute function of the sound output on and off (☞p. 25).
TV
INPUT
m
TV VOL
TV CH
MUTE
J 1 : You can use separate kExternal component operation keys for each input source to operate registered components. Remote control codes must be registered for
each input in advance if you wish to operate external components (☞p. 50).
En
8
CONNECTIONS
Connecting speakers
This unit uses acoustic field effects and sound decoders to bring you the impact of a real movie theater or concert hall. These effects will be brought to you with ideal speaker positioning and
connections in your listening environment.
■ Surround left and right speakers
Speaker channels and functions
The surround speakers are for effect and vocal sounds with the 5.1-channel speakers providing reararea sounds.
■ Front left and right speakers
The front speakers are used for the front channel sounds (stereo sound) and effect sounds.
Ex.
Ex.
Front speaker layout:
Place these speakers at an equal distance from the ideal listening position in the front of the room.
When using a projector screen, the appropriate top positions of the speakers are about 1/4 of the screen
from the bottom.
■ Center speaker
Surround speaker layout:
Place the speakers at the rear of the room on the left and right sides facing the listening position. They
should be placed between 60 degrees and 80 degrees from the listening position and with the speaker
tops at a height of 1.5 – 1.8 m from the floor.
■ Subwoofer
The subwoofer speaker is used for bass sounds and low-frequency effect (LFE) sounds included in
Dolby Digital and DTS. Use a subwoofer that is equipped with an internal amplifier.
The center speaker is for the center channel sounds (dialog, vocals, etc.).
Ex.
Center speaker layout:
Place it halfway between the left and right speakers. When using a TV, place the speaker just above or
just under the center of the TV with the front surfaces of the TV and the speaker aligned.
When using a screen, place it just under the center of the screen.
Ex.
Subwoofer speaker layout:
Place it exterior to the front left and right speakers facing slightly inward to reduce echoes from the
wall.
En
9
CONNECTIONS
Connecting speakers
Speaker layout
Connecting speakers
5.1-channel speaker layout (5 speakers + subwoofer)
■ Changing speaker impedance
This unit is configured for 8Ω speakers when it is dispatched from the factory.
When connecting to 6Ω speakers, carry out the following procedure to switch to 6Ω.
Front speaker R
1
2
Front speaker L
Subwoofer
Set this unit to the standby mode.
Press A while pressing and holding STRAIGHT on the front panel.
Release the keys when “ADVANCED SETUP” is displayed on the front panel display.
After approximately 3 seconds, the top menu items are displayed. J1
A
STRAIGHT
Surround
speaker R
INFO
MEMORY
PRESET
FM
AM
SCENE
BD
DVD
60q
60q
80q
PHONES
INPUT
TONE CONTROL
TV
CD
PROGRAM
RADIO
STRAIGHT
SILENT CINEMA
80q
Center speaker
Surround speaker L
• Connect at least two speakers (front left and right).
• If you cannot connect all five speakers, give priority to the surround speakers.
• The surround speakers should be placed between 60 degrees and 80 degrees from the listening position.
3
4
5
Check that “SP IMP.” is displayed on the front panel.
Press STRAIGHT repeatedly to select a “6ΩMIN.”
Switch this unit to the standby mode, and then switch it on again.
The power turns on, when the settings you made has been configured.
■ CRT monitors
We recommend that you use magnetically shielded speakers to avoid video distortion, especially for
the front and center speakers near the screen.
If your screen still gets interference from magnetically shielded speakers, move the speakers farther
away from your TV.
J 1 : See the section on “Extended functionality that can be configured as needed (Advanced Setup menu)” for details on the
Advanced Setup menu (☞p. 53).
En
10
CONNECTIONS
Connecting speakers
Connect your speakers to their respective terminals on the rear panel.
Front speaker
Surround speaker
R
R
L
L
ANTENNA
HDMI 4
FM
GND AM
SPEAKERS
FRONT
SURROUND
CENTER
OR OUT
AUDIO 2
AUDIO
OUT
Subwoofer
SUBWOOFER
Center speaker
CAUTION
• Remove the AC power cord of this unit from the power outlet before connecting the speakers.
• Generally speaker cables consist of two parallel insulated cables. One of these cables is a different
color, or has a line running along it, to indicate different polarity. Insert the different colored (or lined)
cable into the “+” (positive, red) terminal on this unit and the speakers, and the other cable into the “-”
(minus, black) terminal.
• Be careful that the core of the speaker cable does not touch anything or come into contact with the metal
areas of this unit. This may damage this unit or the speakers. If the speaker cables short circuit,
“CHECK SP WIRES!” will appear on the front panel display when this unit is switched on.
En
11
CONNECTIONS
Connecting speakers
■ Connecting front speakers
KE
RS
2
■ Connecting center speakers / surround
speakers
3
FR
ON
SU
EA
KE
NT
ER
1
3
4
2
3
4
SP
ND
CE
T
1
1
RR
OU
■ Connecting the subwoofer
2
Remove approximately 10mm of insulation from the
ends of the speaker cables, and twist the bare wires
of the cables together firmly so that they will not
cause short circuits.
Loosen the speaker terminals.
Insert the bare wire of the speaker cable into the gap
on the side of the terminal.
1
2
3
Press the tab on the speaker terminal down.
Insert the speaker cable end into the terminal.
Lift the tab to fix the speaker cable in place.
1
Connect the subwoofer input jack to the
SUBWOOFER jack on this unit with an audio pin
cable.
2
Set the subwoofer volume as follows.
Volume: Set to approximately half volume (or slightly less than
half).
Crossover frequency (if available): Set to maximum.
VOLUME
CROSSOVER/
HIGH CUT
Tighten the terminal.
MIN
Connecting the banana plug (Except U.K., Europe,
Asia and Korea models)
MAX
MIN
MAX
Subwoofer examples
Tighten the knob, and then insert the banana plug into the end of
the terminal.
KE
RS
FR
ON
T
Banana plug
En
12
CONNECTIONS
Connecting external devices
■ Audio jacks
Cable plugs and jacks
The main unit is equipped with the following input/output jacks. Use jacks and cables appropriate for
components that you are going to connect.
■ Audio/Video jacks
OPTICAL jacks
COAXIAL jacks
These jacks transmit optical digital audio signals.
Use fiber-optic cables for optical digital audio
signals.
These jacks transmit coaxial digital audio signals.
Use pin cables for digital audio signals.
HDMI jacks
Digital audio fiber-optic cable
Digital audio pin cable
Digital video and digital sound are transmitted through a single jack.
Only use an HDMI cable.
HDMI cable
• Use a 19-pin HDMI cable with the HDMI logo.
• We recommend using a cable less than 5.0 m long to prevent signal quality degradation.
PORTABLE jack
These jacks transmit conventional analog audio
signals.
Use stereo pin cables, connecting the red plug to
the red R jack, and the white plug to the white L
jack.
This jack transmits conventional analog audio
signals.
Use a stereo mini-plug cable when connecting.
Stereo audio pin cable
■ Analog video jacks
COMPONENT VIDEO jacks
VIDEO jack
The signal is separated into three components:
luminance (Y), chrominance blue (PB), and
chrominance red (PR).
Use component video pin cables with three plugs.
This jack transmits conventional analog video
signals.
Use video pin cables.
Component video pin cable
AUDIO jacks
Stereo mini-plug cable
Video pin cable
En
13
CONNECTIONS
Connecting external devices
■ Connecting an HDMI video monitor
Connecting a TV monitor
Connect the HDMI cable to the HDMI OUT jack.
This unit is equipped with the following three types of output jack for connection to a TV.
HDMI OUT, COMPONENT VIDEO or VIDEO. Select the proper connection according to the input
signal format supported by your TV.
HDMI OUT jack
HDMI
DOCK
HDMI input
(BD/DVD)
HDMI OUT
HDMI 2
HDMI 1
HDMI 3
HDMI 4
COMPONENT
VIDEO
PR
PR
PB
PB
HDMI
HDMI
Y
COMPONENT
VIDEO
Y
MONITOR OUT
DOCK
HDMI OUT
(BD/DVD)
HDMI 2
HDMI 1
HDMI 3
MONITOR OUT
VIDEO
HDMI 4
TV
COMPONENT
VIDEO
PR
PR
PB
PB
OPTICAL
AV 1
Y
MONITOR OUT
Y
COMPONENT
VIDEO
VIDEO
COMPONENT VIDEO jacks
(MONITOR OUT)
COAXIAL
AV 2
COAXIAL
OPTICAL
(CD)
( TV )
AV 3
AV 4
AV 5
AV
OUT
AUDIO 1
AUDIO 2
AUDIO
OUT
MONITOR OUT
• Use a 19-pin HDMI cable with the HDMI logo.
• We recommend using a cable less than 5.0 m long to prevent signal quality degradation.
VIDEO jack
(MONITOR OUT)
This unit will receive HDMI, component, or video signals in the same format as transmitted by the
output devices.
For example, these three output devices must be connected to the monitor by matching input/output
jacks and cables, and then you must change the TV’s input mode to the proper setting.
■ Connecting a component video monitor
Connect the component video cable to the COMPONENT VIDEO (MONITOR OUT) jacks.
Component video input
Input
Output
HDMI
HDMI
PR
HDMI input
COMPONENT
VIDEO
VIDEO
COMPONENT
VIDEO
COMPONENT
VIDEO
TV
DOCK
PR
Component
video input
VIDEO
PB
Y
Video input
(BD/DVD)
HDMI OUT
HDMI 2
HDMI 1
HDMI 3
HDMI 4
COMPONENT
VIDEO
MONITOR OUT
PR
PB
Y
PB
PR
Y
PB
Y
COMPONENT
VIDEO
OPTICAL
AV 1
MONITOR OUT
VIDEO
TV
COAXIAL
AV 2
COAXIAL
OPTICAL
(CD)
( TV )
AV 3
AV 4
AV 5
AV
OUT
AUDIO 1
AUDIO 2
AUDIO
OUT
En
14
CONNECTIONS
Connecting external devices
■ Connecting a video monitor
Connect the video pin cable to the VIDEO (MONITOR OUT) jack.
DOCK
Video input
(BD/DVD)
HDMI OUT
HDMI 2
HDMI 1
HDMI 3
HDMI 4
COMPONENT
VIDEO
PR
PR
PB
PB
VIDEO
V
Y
MONITOR OUT
Y
COMPONENT
VIDEO
MONITOR OUT
VIDEO
TV
V
OPTICAL
AV 1
COAXIAL
AV 2
COAXIAL
OPTICAL
(CD)
( TV )
AV 3
AV 4
AV 5
AV
OUT
AUDIO 1
AUDIO 2
AUDIO
OUT
■ Listening to TV audio
To transmit sound from the TV to this unit, connect its AV1-5 or AUDIO1-2 jacks to the TV’s
AUDIO OUT jacks.
If the TV supports optical digital audio output, we recommend that you connect the TV audio output
to the receiver’s AV4 jack. Connecting to AV4 allows you to switch the input source to AV4 with just
a single key operation using the SCENE function (☞p. 26).
Audio output
(Optical)
DOCK
(BD/DVD)
HDMI OUT
HDMI 2
HDMI 1
HDMI 3
HDMI 4
COMPONENT
VIDEO
OPTICAL
PR
PR
PB
PB
O
Y
MONITOR OUT
Y
COMPONENT
VIDEO
MONITOR OUT
VIDEO
TV
O
OPTICAL
COAXIAL
COAXIAL
OPTICAL
(CD)
AV 1
AV 2
AV 3
AV 5
AV
OUT
AUDIO 1
AUDIO 2
AUDIO
OUT
You can control your TV using the receiver’s remote control by entering the TV’s remote control
code (☞p. 50).
En
15
CONNECTIONS
Connecting external devices
CODE SET
TRANSMIT
SOURCE
Connecting BD/DVD players and other devices
RECEIVER
SLEEP
HDMI
1
2
1
2
3
4
3
4
This unit has the following input jacks. Connect them to the appropriate output jacks on
the external components.
AV
AUDIO
5
V-AUX
[ A ]
1
2
[ B ]
DOCK
Input jack
TUNER
FM
AM
INFO
MEMORY
PRESET
TUNING
ENHANCER SUR. DECODE
MOVIE
MUSIC
Audio input
HDMI1
HDMI
HDMI
HDMI2
HDMI
HDMI
HDMI3
HDMI
HDMI
HDMI4
SCENE
TV
CD
SETUP
HDMI/Audio (Optical)
output
q
VOLUME
ENTER
HDMI
HDMI OUT
DOCK
(BD/DVD)
HDMI 2
HDMI 3
HDMI 4
COMPONENT
VIDEO
HDMI
PR
PR
PB
PB
HDMI
HDMI
HDMI
AV1
Component video
Optical
AV2
Component video
Coaxial digital
AV3
Video
Coaxial digital
AV4
Video
Optical
AV5
Video
Analog (Stereo)
AUDIO1
—
Analog (Stereo)
AUDIO2
—
Analog (Stereo)
VIDEO AUX
Video
Analog (Stereo)
Y
COMPONENT
VIDEO
Y
OPTICAL
MONITOR OUT
MONITOR OUT
VIDEO
O
RADIO
OPTION
RETURN
Video input
This unit can use the AV1-5 or AUDIO1-2 input jacks to receive audio signals from
other audio input sources.
For example, if an external device cannot produce audio signals from an HDMI jack,
use the following method to change the audio input.
STEREO
STRAIGHT
BD
DVD
■ Receiving audio from other input sources
d
j
O
OPTICAL
COAXIAL
AV 2
COAXIAL
OPTICAL
(CD)
( TV )
AV 3
AV 4
AV
OUT
AV 5
AUDIO 1
AUDIO 2
AUDIO
OUT
BD/DVD player
DISPLAY
POP-UP
MENU
TOP
MENU
1
2
3
4
MUTE
REC
1
2
3
4
5
6
7
8
9
0
10
TV
TV VOL
ENT
■ Connecting BD/DVD players and other devices with
HDMI
INPUT
TV CH
MUTE
Connect the device with an HDMI cable to one of the HDMI1-4 jacks.
Select the HDMI input (HDMI1-4) that the external device is connected to for
playback.
d Input selector
j Cursor C / D / E
j ENTER
q OPTION
Use the dInput selector to select the desired HDMI input source.
Press qOPTION to display the Option menu. J1
Press jCursor C until “Audio In” is displayed, and then press
jENTER.
Press jCursor D / E to select the audio input source.
HDMI1
VOL.
Audio;;;;;;AV1
DOCK
SW
C
R
SR
If you have selected AV1 input audio (optical digital)
(BD/DVD)
HDMI OUT
L
SL
COMPONENT
VIDEO
HDMI
HDMI output
PR
PR
PB
PB
Y
HDMI
MONITOR OUT
5
Y
COMPONENT
VIDEO
Once you have completed the setup, press qOPTION to close the
Option menu.
MONITOR OUT
VIDEO
HDMI
OPTICAL
AV 1
BD/DVD player
COAXIAL
AV 2
COAXIAL
OPTICAL
(CD)
( TV )
AV 3
AV 4
AV 5
AV
OUT
AUDIO 1
AUDIO 2
AUDIO
OUT
J 1 : See the section on “Configuring the settings specific for each input source (Option menu)” for details on
the Option menu (☞p. 37).
En
16
CONNECTIONS
Connecting external devices
■ Connecting BD/DVD players and other devices with component
cables
■ Component connections to analog audio output devices
Connect the device with a component video cable to one of the AV1-2 input jacks.
Component video / Audio
output
Using optical digital audio output sources
Select the AV1 input that the external device is connected to for playback.
COMPONENT
VIDEO
PR
PB
Component video / Audio (Optical)
output
Y
PR
AUDIO
COMPONENT
VIDEO
PB
L
Y
MONITOR OUT
PR
DOCK
HDMI 2
HDMI 1
HDMI 3
R
HDMI 4
PR
HDMI 2
HDMI 1
PR
PB
Y
Y
Y
HDMI 4
PB
Y
COMPONENT
VIDEO
MONITOR OUT
VIDEO
L
PR
PR
R
OPTICAL
PB
HDMI 3
PR
COMPONENT
VIDEO
PB
AV 1
PB
COAXIAL
AV 2
COAXIAL
OPTICAL
(CD)
( TV )
AV 3
AV 4
AV
OUT
AUDIO 1
AUDIO
OUT
AUDIO 2
PB
Y
Y
COMPONENT
VIDEO
MONITOR OUT
OPTICAL
(BD/DVD)
HDMI OUT
(BD/DVD)
HDMI OUT
DOCK
COMPONENT
VIDEO
MONITOR OUT
VIDEO
Game console
O
O
OPTICAL
AV 1
COAXIAL
AV 2
COAXIAL
OPTICAL
(CD)
( TV )
AV 3
AV 4
AV 5
AV
OUT
AUDIO 1
AUDIO 2
AUDIO
OUT
BD/DVD player
Using coaxial digital audio output sources
Select the AV2 input that the external device is connected to for playback.
Component video / Audio (Coaxial)
output
You can use the video input from the AV1-2 jacks in combination with the audio input from other
AV inputs or AUDIO1-2.
When connecting these devices, select the AV3-5 or the AUDIO1-2 jacks as the audio input for AV1
or AV2. See “Receiving audio from other input sources” (☞p. 16) for detailed setup guidance.
Select the AV input source (AV1-2) that is connected by component video cable to the external
device for playback.
AV1
VOL.
Audio;;;AUDIO1
COMPONENT
VIDEO
PR
DOCK
SW
C
R
SR
(BD/DVD)
HDMI OUT
HDMI 2
HDMI 1
HDMI 3
HDMI 4
COMPONENT
VIDEO
PR
PB
PR
PR
Y
PB
PB
Y
COAXIAL
L
SL
MONITOR OUT
PB
Y
Y
COMPONENT
VIDEO
MONITOR OUT
VIDEO
C
C
OPTICAL
AV 1
COAXIAL
AV 2
COAXIAL
OPTICAL
(CD)
( TV )
AV 3
AV 4
AV 5
AV
OUT
AUDIO 1
AUDIO 2
AUDIO
OUT
BD/DVD player
En
17
CONNECTIONS
Connecting external devices
■ Connecting BD/DVD players and other devices with video cables
Connect the external device with a video pin cable to one of the AV3-5 input jacks.
Using analog stereo audio output sources
Select the AV5 input that the external device is connected to for playback.
Using optical digital audio output sources
Select the AV4 input that the external device is connected to for playback.
Video / Audio
output
DOCK
(BD/DVD)
HDMI OUT
HDMI 2
HDMI 1
HDMI 3
HDMI 4
COMPONENT
VIDEO
VIDEO
PR
PR
PB
PB
V
Video / Audio (Optical)
output
DOCK
(BD/DVD)
HDMI OUT
HDMI 3
HDMI 4
COMPONENT
VIDEO
VIDEO
AUDIO
PR
PR
PB
PB
Y
MONITOR OUT
L
V
Y
COMPONENT
VIDEO
R
V
Y
MONITOR OUT
MONITOR OUT
VIDEO
L
V
OPTICAL
HDMI 2
HDMI 1
Y
COMPONENT
VIDEO
R
OPTICAL
MONITOR OUT
VIDEO
AV 1
COAXIAL
AV 2
COAXIAL
OPTICAL
(CD)
( TV )
AV 3
AV 4
AV 5
AV
OUT
AUDIO 1
AUDIO 2
AUDIO
OUT
O
O
OPTICAL
AV 1
COAXIAL
AV 2
COAXIAL
OPTICAL
(CD)
TV
AV 3
AV 5
AV
OUT
AUDIO 1
AUDIO 2
AUDIO
OUT
BD/DVD player
BD/DVD player
Using coaxial digital audio output sources
Select the AV3 input that the external device is connected to for playback.
DOCK
Video / Audio (Coaxial)
output
VIDEO
V
(BD/DVD)
HDMI OUT
HDMI 2
HDMI 1
HDMI 3
HDMI 4
COMPONENT
VIDEO
PR
PR
PB
PB
Y
MONITOR OUT
Y
COMPONENT
VIDEO
V
MONITOR OUT
VIDEO
COAXIAL
C
C
OPTICAL
COAXIAL
COAXIAL
(CD)
AV 1
AV 2
OPTICAL
( TV )
AV 4
AV 5
AV
OUT
AUDIO 1
AUDIO 2
AUDIO
OUT
BD/DVD player
En
18
CONNECTIONS
Connecting external devices
■ Connecting CD players and other audio devices
Using coaxial digital output sources
Select the AV input (AV2 or AV3) that the external device is connected to for playback.
Using analog stereo output sources
Select the audio input (AUDIO1-2) that the external device is connected to for playback.
DOCK
(BD/DVD)
HDMI OUT
HDMI 2
HDMI 1
HDMI 3
HDMI 4
COMPONENT
VIDEO
DOCK
(BD/DVD)
HDMI OUT
HDMI 2
HDMI 1
HDMI 3
PR
PR
PB
PB
HDMI 4
COMPONENT
VIDEO
Audio output
PR
Audio (Coaxial) output
PR
Y
PB
MONITOR OUT
PB
AUDIO
Y
COMPONENT
VIDEO
L
Y
MONITOR OUT
Y
COMPONENT
VIDEO
C
C
MONITOR OUT
VIDEO
R
MONITOR OUT
VIDEO
COAXIAL
L
OPTICAL
COAXIAL
COAXIAL
(CD)
AV 1
OPTICAL
( TV )
AV 4
AV 5
AV
OUT
AUDIO 1
AUDIO 2
AUDIO
OUT
R
OPTICAL
AV 1
COAXIAL
AV 2
COAXIAL
OPTICAL
(CD)
( TV )
AV 3
AV 4
AV 5
AV
OUT
AUDIO 1
AUDIO 2
AUDIO
OUT
CD player
CD player
We recommend connecting audio devices with an coaxial digital output to the AV3 coaxial digital
jack on this unit. This connection allows you to switch to the AV input 3 just by pressing the “CD”
SCENE key (☞p. 26).
Using optical digital output sources
Select the AV input (AV1 or AV4) that the external device is connected to for playback.
DOCK
HDMI OUT
(BD/DVD)
HDMI 2
HDMI 1
HDMI 3
HDMI 4
COMPONENT
VIDEO
PR
PR
PB
PB
Audio (Optical) output
Y
MONITOR OUT
Y
COMPONENT
VIDEO
MONITOR OUT
VIDEO
OPTICAL
O
O
OPTICAL
COAXIAL
AV 2
COAXIAL
OPTICAL
(CD)
TV
AV 3
AV 5
AV
OUT
AUDIO 1
AUDIO 2
AUDIO
OUT
CD player
En
19
CONNECTIONS
Connecting external devices
Connecting video cameras and portable audio players
Transmitting input A/V to external devices
Use the VIDEO AUX jacks on the front panel to temporarily connect video cameras, game consoles, or
portable audio devices to the receiver.
Select the V-AUX input to use these connected devices.
This receiver can transmit selected incoming analog audio/video signals to external devices through the
AV OUT and AUDIO OUT jacks. You can record these input audio and video signals to VCRs or
similar devices, or send them to other TVs or external devices.
Video / Audio
input
RADIO
VIDEO
VIDEO AUX
STRAIGHT
V
PORTABLE
VIDEO
V
L
L
AUDIO
R
AUDIO
R
L
AUDIO
AUDIO OUT
R
L
DOCK
Audio output
Audio output
(BD/DVD)
HDMI OUT
HDMI 2
HDMI 1
HDMI 3
HDMI 4
COMPONENT
VIDEO
R
PR
PR
PB
PB
VIDEO
V
Video output
VCR
V
Y
MONITOR OUT
Y
COMPONENT
VIDEO
MONITOR OUT
VIDEO
L
R
OPTICAL
AV 1
COAXIAL
AV 2
COAXIAL
OPTICAL
(CD)
( TV )
AV 3
AV 4
Audio input
L
AV 5
AUDIO
R
AV
OUT
AUDIO 1
AUDIO 2
AUDIO
OUT
L
R
Portable audio player
Video cameras
• Be sure to turn down the volume when connecting this unit and the other devices.
• When external components are connected to both the PORTABLE jack and the AUDIO jacks, the sound
output from the PORTABLE jack is transmitted.
Audio recorder
Using the AV OUT jacks
Connect this jacks to the external device’s video input jack and analog audio input jacks.
Using the AUDIO OUT jacks
Connect this jack to the external device’s analog audio input jacks.
HDMI audio/video signals, component video signals, and digital audio signals cannot be transmitted
from these jacks.
En
20
CONNECTIONS
Connecting the FM/AM antennas
An indoor FM antenna and an AM loop antenna are included with this receiver. Connect these antennas
properly to their respective jacks.
AM loop antenna
Position the AM antenna away from the receiver. The
wires of the AM antenna have no polarity.
You can connect either wire to the AM jack or the
GND jack.
Indoor FM antenna
HDMI 3
HDMI 4
FM
GND AM
SPEAKERS
FRONT
SURROUND
CENTER
MONITOR OUT
Connecting the AM loop antenna
Press and hold
Insert
Release
■ Improving FM reception
We recommend using an outdoor antenna. For more information, consult the nearest authorized
dealer.
■ Improving AM reception
Connect this unit to an outdoor antenna with a 5-10 m vinyl-coated wire. Make sure the AM loop
antenna is still connected.
Connecting the GND jack can reduce noise. Connect the jack to a store-bought ground bar or copper
plate with a vinyl-covered wire and bury this new attachment in moist ground.
The GND jack is not to be connected to the ground socket of an electrical outlet.
En
21
CONNECTIONS
CODE SET
TRANSMIT
SOURCE
Setting up speaker parameters
RECEIVER
SLEEP
HDMI
1
2
3
4
3
4
AV
1
2
AUDIO
5
V-AUX
[ A ]
1
2
[ B ]
DOCK
TUNER
FM
AM
PRESET
INFO
TUNING
MUSIC
STEREO
STRAIGHT
SCENE
BD
DVD
STEP 1: Display the setting menu
STEP 1: Display the setting menu
1
2
Display the Setup menu from which you can configure
all settings for this unit, and then display the menu for
speaker settings.
MEMORY
ENHANCER SUR. DECODE
MOVIE
When you have finished connecting your speakers,
configure this unit so that they output sound normally.
Carry out the following steps to configure this unit.
TV
CD
SETUP
RADIO
OPTION
RETURN
DISPLAY
POP-UP
MENU
TOP
MENU
Set the size and connection status of speakers and
subwoofers, and whether to designate a specific speaker
i (or subwoofer) for low-frequency sound.
MUTE
REC
j Set the distance between the speakers and the listening
point so that the sound from each speaker reaches the
listening point at the appropriate timing.
STEP 4: Playback a test tone
1
2
3
4
5
6
7
8
9
0
10
TV
INPUT
TV VOL
MUTE
TV CH
ENT
Playback a test tone to allow you to configure sound
volumes while listening to the actual effect your settings
are having.
The settings in step 2 are not necessary with the
following speaker configuration:
The Setup menu that allows you to configure all
parameters on this unit appears. J1
VOL.
SpeakerSetup
3
– Front speaker: woofer diameter is 16 cm or larger
– Center/surround speakers: woofer diameter is 16 cm or
smaller
– Subwoofer: connected
Press iSETUP on the remote control.
SETUP
STEP 3: Set the distance from the listening
point
VOLUME
ENTER
STEP 2: Set the speaker status and size
Switch this unit on.
L
SL
SW
C
R
SR
Check that “Speaker Setup” appears and
press jENTER.
SP SET
Config
STEP 2: Set the speaker status and
size
4
Check that “Config” appears and press
jENTER.
CONFIG
VOL.
Subwoofer;;Yes
L
SL
SW
C
R
SR
VOL.
L
SL
SW
C
R
SR
Continues to the
next page
This completes step 1.
STEP 5: Adjust the volume
Adjust the volume for each speaker and configure them
so that the sound is balanced.
i SETUP
j ENTER
J 1 : See the section “Setting various functions (Setup menu)” for
details on the Setup menu (☞p. 40).
En
22
CONNECTIONS
Setting up speaker parameters
CODE SET
TRANSMIT
SOURCE
RECEIVER
SLEEP
5
HDMI
1
2
1
2
3
4
3
4
AV
AUDIO
5
V-AUX
[ A ]
1
2
[ B ]
DOCK
Use jCursor B / C to select the speaker
(subwoofer) you want to configure, and
then use jCursor D / E to select speaker
status and size.
Information
Description
• Whether or not you set “Crossover,” “SWFR Phase,”
and “Extra Bass” is optional. Check how the effects
sound and then configure them to your liking.
• Use the following as a guide when setting speaker
sizes.
8
Press jCursor B / C to select the speaker
that you want to configure, and press
jCursor D / E to change the distance.
If necessary, you can change the setting units under
“Unit.”
Setting
TUNER
FM
AM
PRESET
INFO
TUNING
MEMORY
Subwoofer
Sets the subwoofer status.
Yes/None
Front
Selects the size (sound
reproduction capacity) of the
front speakers.
Small/Large
Selects the size of the center
speakers. Choose “None” if
you do not have a center
speaker connected.
None/Small/
Large
Selects the size of the surround
speakers. Choose “None” if
you do not have surround
speakers connected.
None/Small/
Large
Audio with a frequency below
this limit will be output from
the subwoofer or the front
speakers.
40Hz to
200Hz
Switches the phase of the
subwoofer.
Normal/
Reverse
Selects whether to play front
channel low-frequency
components through either of
the front speakers or the
subwoofer (Off), or through
both the subwoofer and front
speakers (On).
On/Off
ENHANCER SUR. DECODE
MOVIE
MUSIC
STEREO
Information
Woofer diameter
• 16 cm or larger → Large
• 16 cm or smaller → Small
STRAIGHT
Center
SCENE
BD
DVD
TV
CD
SETUP
RADIO
OPTION
VOLUME
ENTER
RETURN
j
Sur. LR
DISPLAY
TOP
MENU
POP-UP
MENU
MUTE
When speaker size is set to “Small,” low-frequency
components of the speakers you configured are
produced from the subwoofer (or from the front
speakers if there is no subwoofer).
Description
Setting
Unit
Switches between setting
units (feet / meters).
feet (ft) /
meters (m)
Front L
Front speaker L
1.0 ft to 80.0 ft
(0.30 m to 24.0 m)
Front R
Front speaker R
1.0 ft to 80.0 ft
(0.30 m to 24.0 m)
Center
Center speaker
1.0 ft to 80.0 ft
(0.30 m to 24.0 m)
Sur. L
Surround speaker L
1.0 ft to 80.0 ft
(0.30 m to 24.0 m)
Sur. R
Surround speaker R
1.0 ft to 80.0 ft
(0.30 m to 24.0 m)
SWFR
Subwoofer
1.0 ft to 80.0 ft
(0.30 m to 24.0 m)
REC
Crossover
1
2
3
4
5
6
7
8
9
0
10
ENT
TV
SWFR Phase
INPUT
TV VOL
TV CH
MUTE
j Cursor B / C / D / E
j ENTER
j RETURN
Extra Bass
When you have completed the settings for one speaker,
repeat the same procedure for all speakers to complete
settings.
6
Press jRETURN when setting is complete.
When you have completed the settings for one speaker,
repeat the same procedure for all speakers to complete
settings.
Return to the previous menu.
This completes step 2.
STEP 3: Set the distance from the
listening point
9
Press jRETURN when setting is complete.
Return to the previous menu.
This completes step 3.
7
Press jCursor C to display “Distance” and
press jENTER.
DIST
Continues to the
next page
VOL.
Unit;;;;;;feet
L
SL
SW
C
R
SR
En
23
CONNECTIONS
Setting up speaker parameters
CODE SET
TRANSMIT
SOURCE
STEP 4: Playback a test tone
RECEIVER
SLEEP
STEP 5: Adjust the volume
HDMI
1
2
1
2
3
4
3
4
AV
5
V-AUX
[ A ]
1
2
[ B ]
DOCK
TEST
TUNER
FM
TUNING
13
L
SL
SW
C
Press jCursor B repeatedly to display
“Level” and press jENTER.
LEVEL
VOL.
>OffOn
AM
PRESET
INFO
Press jCursor C repeatedly to display
“Test Tone” and press jENTER.
VOL.
d
10
AUDIO
FL----d----
R
SR
L
SL
SW
C
16
Repeat steps 14 and 15 to adjust the
volume balance for all speakers to your
preference.
17
Press jRETURN when setting is
complete.
Return to the previous menu.
R
SR
This completes step 5.
MEMORY
ENHANCER SUR. DECODE
MOVIE
MUSIC
STEREO
11
STRAIGHT
SCENE
BD
DVD
TV
CD
SETUP
RADIO
i
OPTION
VOLUME
ENTER
RETURN
Use jCursor D / E to select “On.”
A test tone plays back as soon as you select “On.”
The test tone plays back in a clockwise fashion, as
follows.
j
Front L
DISPLAY
TOP
MENU
POP-UP
MENU
Use jCursor B / C to switch the speaker
that is outputting the test tone, looking
for speakers with a different volume level
to the others.
The front panel display shows the speaker that is
outputting the test tone. J1
Front R
18
19
Repeat procedures 10-12 (step 4) to stop
playback of the test tone.
Once you have completed all settings,
press iSETUP to close the Setup menu.
Center
Information
MUTE
REC
Subwoofer
1
2
3
4
5
6
7
8
9
0
10
14
Surround L
Surround R
ENT
Speakers
FL
Front speaker L
FR
Front speaker R
C
Center speaker
SL
Surround speaker L
SR
Surround speaker R
SWFR
Subwoofer
TV
INPUT
TV VOL
TV CH
MUTE
i SETUP
j Cursor B / C / D / E
j ENTER
j RETURN
12
Check that the test tone is playing back
and press jRETURN.
Return to the previous menu.
This completes step 4.
15
If you find a speaker with a different
volume level to the others, use jCursor
D / E to adjust the volume. Use Front
speaker L or R as a default when
adjusting volumes.
To raise the volume: Press jCursor E.
To lower the volume: Press jCursor D.
J 1 : Only speakers configured for use in procedure 5 output the test
tone.
En
24
PLAYBACK
CODE SET
TRANSMIT
SOURCE
Basic playback procedure
RECEIVER
SLEEP
HDMI
1
2
3
4
3
4
AV
1
2
AUDIO
5
V-AUX
[ A ]
1
2
[ B ]
DOCK
d
TUNER
FM
AM
PRESET
INFO
MEMORY
MOVIE
MUSIC
1
2
Turn on external components (TV, DVD
player, etc.) connected to this unit.
Turn on this unit and select the input source
using dInput selector.
The name of the selected input source is displayed for
a few seconds. J1
TUNING
Adjusting high/low-frequency sound
(Tone control)
You can adjust the balance of the high-frequency range
(Treble) and low-frequency range (Bass) of sounds
output from the front left and right speakers to obtain
desired tone.
2
Press PROGRAM l / h to adjust the output
level in those frequency ranges.
Adjustable range
-10.0 dB to +10.0 dB
Adjustment
increments
2.0 dB
ENHANCER SUR. DECODE
STEREO
STRAIGHT
3
SCENE
BD
DVD
TV
CD
SETUP
RADIO
OPTION
ENTER
RETURN
Play the external component that you have
selected as the source input, or select a
radio station on the tuner.
VOLUME
r
Refer to the instruction manuals provided with the
external component for details on playback.
MUTE
s
For details on the following operations, refer to the
corresponding pages:
DISPLAY
POP-UP
MENU
TOP
MENU
The tone control of the speakers or headphones can be
set separately. Set the headphone tone control with the
headphones connected.
1
The display returns to the previous display soon after
you release the key.
If you set the balance extremely off, sounds may not
match those from other channels well.
Press TONE CONTROL on the front panel
repeatedly to select “Treble” or “Bass.”
TONE CONTROL
REC
1
2
3
4
5
6
7
8
9
0
10
• “FM/AM tuning” (☞p. 30)
• “Playing back tunes from your iPod™/iPhone™”
(☞p. 33)
• “Playing back tunes from Bluetooth™ components”
(☞p. 35)
ENT
INFO
MEMORY
PRESET
FM
AM
SCENE
BD
DVD
TV
CD
RADIO
TV
INPUT
TV VOL
TV CH
MUTE
4
Press rVOLUME +/- to adjust the volume.
PHONES
TONE CONTROL
STRAIGHT
PROGRAM
SILENT CINEMA
PROGRAM l / h
To mute the output.
d Input selector
r VOLUME +/s MUTE
INPUT
Press sMUTE to mute the audio output.
Press sMUTE again to unmute.
The current setting is displayed on the front panel
display.
TONE
Treble
VOL.
0.0dB
L
SL
SW
C
R
SR
J 1 : You can change the input source name displayed on the front
panel display as necessary (☞p. 46).
En
25
PLAYBACK
Changing input settings with a single key (SCENE function)
CODE SET
TRANSMIT
SOURCE
RECEIVER
SLEEP
This unit has a SCENE function that allows you to turn the power on and change input sources and sound field programs with one key.
HDMI
1
2
3
4
3
4
AV
1
2
AUDIO
5
V-AUX
[ A ]
1
2
[ B ]
DOCK
PRESET
TUNING
TUNER
FM
AM
INFO
MEMORY
Four scenes are available for different uses, such as
d playing movies or music. The following input sources
and sound field programs are provided as the initial
factory settings.
SCENE
Input
Sound field program
BD/DVD
HDMI1
Straight
TV
AV4
Straight
CD
AV3
Straight
RADIO
TUNER
5ch Enhancer
ENHANCER SUR. DECODE
MOVIE
MUSIC
STEREO
g
STRAIGHT
SCENE
BD
DVD
TV
CD
SETUP
RADIO
OPTION
1
2
Use dInput selector to select the input
source you want to register.
Use the gSound selection keys to select
the sound field program you want to
register.
3
Press the hSCENE key until “SET
Complete” appears on the front panel
display.
SCENE1
VOL.
SET Complete
L
SL
SW
C
R
SR
Release the key when “SET Complete” is displayed.
When changing “SCENE,” you can also use switch
between the external components that the remote
control operates (☞p. 50).
VOLUME
ENTER
RETURN
h
Registering input sources/sound
field program
DISPLAY
TOP
MENU
POP-UP
MENU
MUTE
REC
Enjoying sound field programs
1
2
3
4
5
6
7
8
9
0
10
This unit is also equipped with a Yamaha digital sound field processing (DSP) chip. You can enjoy multi-channel playback for almost any sound source using various
sound field programs stored on the chip, and a range of sound decoders.
ENT
TV
INPUT
TV VOL
TV CH
MUTE
d Input selector
g Sound selection keys
g MOVIE
g MUSIC
g STEREO
g SUR. DECODE
g STRAIGHT
h SCENE
Selecting sound field programs and
sound decoders
This unit offers sound field settings (sound field
programs) in many different categories suitable for
movies, music and other uses. Choose a sound field
program that sounds best with the source you are playing
back, rather than relying on the name or explanation of
the program.
• Sound field programs are stored for each input source.
When you change the input source, the sound field
program previously selected for that input source is
applied again.
• If the sampling frequency of an input source is higher
than 96 kHz, this unit does not apply any sound field
programs.
Selects sound field program:
MOVIE category: Press gMOVIE repeatedly
MUSIC category: Press gMUSIC repeatedly
Selects stereo reproduction:
Press gSTEREO repeatedly
Selects compressed music enhancer:
Press gSTEREO repeatedly
Selects surround decoder:
Press gSUR. DECODE repeatedly
Switches Straight decoding mode (☞p. 27):
Press gSTRAIGHT
Sound field program categories
MOVIE
VOL.
Sci-Fi
L
SL
SW
C
R
SR
Program
• You can use the speaker indicators on the front panel
display to check what speakers are currently
outputting sound (☞p. 7).
• You can adjust sound field elements (sound field
parameters) for each of the programs.
En
26
PLAYBACK
Enjoying sound field programs
CODE SET
TRANSMIT
SOURCE
RECEIVER
SLEEP
HDMI
1
2
3
4
3
4
AV
1
2
AUDIO
5
V-AUX
[ A ]
1
2
[ B ]
DOCK
■ Enjoying unprocessed playback
■ Enjoying stereo playback
(Straight decoding mode)
Use straight decoding mode when you want to playback
sound without sound field processing. You can playback
as follows in straight decoding mode.
2-channel sources such as CD
TUNER
FM
AM
PRESET
INFO
MEMORY
MOVIE
MUSIC
TUNING
ENHANCER SUR. DECODE
STEREO
STRAIGHT
SCENE
BD
DVD
TV
CD
SETUP
RADIO
OPTION
VOLUME
ENTER
RETURN
DISPLAY
TOP
MENU
POP-UP
MENU
Stereo sound plays through the front left and right
speakers.
Select “2ch Stereo” from the surround field programs
when you want to playback 2-channel stereo sound
(from the front speakers only), regardless of the
playback source.
Selecting “2ch Stereo” will playback as follows for the
playback of CD and BD/DVD sources.
2-channel sources such as CD
Multi-channel playback sources such as BD/
g DVD
Plays back audio from a playback source without
applying sound field effects, using an appropriate
decoder to split the signal into multiple channels.
1
Stereo sound plays back through the front speakers.
Multi-channel sources such as BD/DVD
Playback channels other than the front channels in the
playback source are mixed with the front channels and
played back through the front speakers.
Press gSTRAIGHT to activate the straight
decoding mode.
1
Press gSTEREO repeatedly to select “2ch
Stereo.”
without surround sound speakers
This unit allows you to use virtual surround speakers to
enjoy sound field surround effects, even without any
surround speakers (Virtual CINEMA DSP mode). You
can even enjoy surround sound presence with just a
minimal configuration of the front speakers only.
This unit will switch to Virtual CINEMA DSP mode
automatically when surround speakers are
unavailable. J1
■ Enjoying sound field programs
with headphones
Even when headphones are connected, you can enjoy the
reproduction sound field presence with ease (SILENT
CINEMA mode). J2
MUTE
STEREO
VOL.
REC
Straight
1
2
3
4
5
6
7
8
9
0
10
ENT
TV
2
L
SL
SW
C
Press gSTRAIGHT again to exit straight
decoding mode.
TV CH
MUTE
MOVIE
Sci-Fi
g Sound selection keys
g STRAIGHT
g STEREO
VOL.
L
SL
SW
C
R
SR
Previously selected program
J 1 : However, Virtual CINEMA DSP mode is not available in the
following conditions:
• When headphones are connected to this unit.
• When a “2ch Stereo” sound field program is selected.
• When straight decoding mode is selected.
VOL.
SW
2ch Stereo
R
SR
INPUT
TV VOL
■ Enjoying sound field programs
2
R
L
To deactivate stereo playback, press any of
the gSound selection keys to select a
sound field program other than “2ch
Stereo.”
MUSIC
Hall in Vienna
VOL.
L
SL
SW
C
R
SR
J 2 : However, SILENT CINEMA mode is not available in the
following conditions:
• When a “2ch Stereo” sound field program is selected.
• When straight decoding mode is selected.
En
27
PLAYBACK
Enjoying sound field programs
Sound field programs
Action Game
This sound field is suitable for action games such as car racing and FPS games. It uses
reflection data that limits the effects range per channel in order to offer a powerful playing
environment that makes the listener feel as if they are right there by enhancing various
effects tones while maintaining a clear sense of directions.
Roleplaying Game
This sound field is suitable for role-playing and adventure games. It combines the sound
field effects for movies and the sound field designs for “Action Game” to represent the depth
and 3D feeling of the field during play, while offering movie-like surround effects in the
movie scenes in the game.
in the table indicates the sound field program for CINEMA DSP.
■ Category: MOVIE
Sound field programs optimized for viewing video sources such as movies, TV programs, and games.
Standard
This program creates a sound field emphasizing the surround feeling without disturbing the
original acoustic positioning of multi-channel audio such as Dolby Digital and DTS. It has
been designed with the concept of an ideal movie theater, in which the audience is
surrounded by beautiful reverberations from the left, right and rear.
Spectacle
This program represents the spectacular feeling of large-scale movie productions. It
reproduces a broad theater sound field that matches cinemascope and wider-screen movies
with an excellent dynamic range providing everything from very small sound effects to
large, impressive sounds.
Sci-Fi
This program clearly reproduces the finely elaborated sound design of the latest science
fiction and special effects-featuring movies. You can enjoy a variety of cinematographically
created virtual spaces reproduced with clear separation between dialog, sound effects and
background music.
Adventure
This program is ideal for precisely reproducing the sound design of action and adventure
movies. The sound field restrains reverberations but puts emphasis on reproducing a
powerful space expanded widely to the left and right. The reproduced depth is also
restrained relatively to ensure the separation between audio channels and the clarity of the
sound.
Drama
This sound field features stable reverberations that match a wide range of movie genres from
serious dramas to musicals and comedies. The reverberations are modest but offer an
optimum 3D feeling, reproducing effects tones and background music softly but cubically
around clear words and center positioning in a way that does not fatigue the listener even
after long hours of viewing.
Mono Movie
This program is provided for reproducing monaural video sources such as a classic movie in
an atmosphere of a good old movie theater. The program produces the optimum expansion
and reverberation to the original audio to create a comfortable space with a certain sound
depth.
Sports
This program allows the listeners to enjoy stereo sport broadcasts and studio variety
programs with enriched live feeling. In sports broadcasts, the voices of the commentator and
sportscaster are positioned clearly at the center while the atmosphere of the stadium expands
in an optimal space to offer the listeners a feeling of presence in the stadium.
■ Category: MUSIC
This sound field is suitable when listening to music sources such as CDs.
Hall in Munich
This sound field simulates a concert hall with approximately 2500 seats in Munich, using
stylish wood for the interior finishing as normal standards for European concert halls. Fine,
beautiful reverberations spread richly, creating a calming atmosphere. The listener’s virtual
seat is at the center left of the arena.
Hall in Vienna
This is an approximately 1700-seat, middle-sized concert hall with a shoebox shape that is
traditional in Vienna. Pillars and ornate carvings create extremely complex reflections from
all around the audience, producing a very full, rich sound.
Chamber
This program creates a relatively wide space with a high ceiling like an audience hall in a
palace. It offers pleasant reverberations that are suitable for courtly music and chamber
music.
Cellar Club
This program simulates a live house with a low ceiling and homey atmosphere. A realistic,
live sound field features powerful sound as if the listener is in a row in front of a small stage.
The Roxy Theatre
This is the sound field of a rock music live house in Los Angeles, with approximately 460
seats. The listener’s virtual seat is at the center left of the hall.
The Bottom Line
This is the sound field at stage front in The Bottom Line, a famous New York jazz club once.
The floor can seat 300 people to the left and right in a sound field offering real and vibrant
sound.
Music Video
This sound field offers an image of a concert hall for live performance of pop, rock and jazz
music. The listener can indulge oneself in a hot live space thanks to the presence sound field
that emphasizes the vividness of vocals and solo play and the beat of rhythm instruments,
and to the surround sound field that reproduces the space of a big live hall.
En
28
PLAYBACK
Enjoying sound field programs
■ Category: STEREO
Suitable for listening to stereo sources.
2ch Stereo
Use this program to mix down multi-channel sources to 2 channels. When multi-channel
signals are input, they are down mixed to 2 channels and output from the front left and right
speakers.
5ch Stereo
Use this program to output sound from all speakers. When you play back multi-channel
sources, this unit down-mixes the source to 2 channels, and then outputs the sound from all
speakers. This program creates a larger sound field and is ideal for background music at
parties, etc.
■ Category: ENHNCR (Compressed music enhancer)
Suitable for listening to compressed audio, such as MP3.
Straight Enhancer
Use this program to restore the original depth and dynamics of 2-channel or multi-channel
to compression audio.
5ch Enhancer
Use this program to play back compression artifacts in 5-channel stereo.
■ Category: SUR.DEC (Surround decode mode)
Select this program to playback sources with selected decoders. You can playback 2-channel sources as
5.1-channel sound.
q Pro Logic
A Dolby Pro Logic decoder. Suitable for any source.
q PLII Movie
A Dolby Pro Logic II decoder. Suitable for viewing any movie.
q PLII Music
A Dolby Pro Logic II decoder. Suitable for listening to music.
q PLII Game
A Dolby Pro Logic II decoder. Suitable for playing games.
En
29
PLAYBACK
FM/AM tuning
CODE SET
TRANSMIT
SOURCE
RECEIVER
SLEEP
HDMI
1
2
3
4
3
4
When using the FM/AM tuner, adjust the direction of
the FM/AM antenna connected to this unit to get the
best reception.
AV
1
2
AUDIO
5
V-AUX
[ A ]
1
2
[ B ]
DOCK
d The FM/AM tuner of this unit provides the following
two modes for tuning.
TUNER
FM
AM
INFO
MEMORY
PRESET
TUNING
Normal tuning
ENHANCER SUR. DECODE
MOVIE
MUSIC
STEREO
STRAIGHT
e You can tune in to a desired FM/AM station by searching
or specifying its frequency.
SCENE
BD
DVD
TV
CD
SETUP
POP-UP
MENU
MUTE
2
3
4
5
6
7
8
9
0
10
l
9
8
5
L
SL
SW
C
R
SR
Use eTUNING H / I to set a frequency to
receive.
eTUNING I
Decreases the frequency. Press and hold this key for
longer than a second to search automatically for a station
on a lower frequency than the current one. J1
ENT
TV
INPUT
TV VOL
In normal tuning mode, use the lNumeric keys on
the remote control to enter a frequency. Leave the
decimal point out when entering a number. J2
For example, enter as follows to select a station on
98.5MHz.
eTUNING H
Increases the frequency. Press and hold this key for
longer than a second to search automatically for a station
on a higher frequency than the current one. J1
REC
1
Press eFM or eAM to select a band to
receive.
FM 87.5 MHz
3
DISPLAY
TOP
MENU
Press dTUNER to switch to the tuner input.
■ Entering a frequency number
VOL.
You can preset the frequencies of FM/AM stations by
registering them to specific numbers, and later just select
those numbers to tune in.
VOLUME
ENTER
1
2
Preset tuning (☞p. 31)
RADIO
OPTION
RETURN
Selecting a frequency for reception
(Normal tuning)
TV CH
MUTE
Lights up when receiving
a broadcast from a station
d TUNER
e FM
e AM
e TUNING H / I
l Numeric keys
Lights up when receiving
a stereo broadcast
VOL.
STEREO
TUNED
FM98.5MHz
L
SL
SW
C
R
SR
J 1 : When searching for a station, release the key once the search has
started.
J 2 : “Wrong Station!” appears on the front panel display when you
enter a frequency that is out of receivable range. Make sure that
the frequency entered is correct.
En
30
PLAYBACK
FM/AM tuning
CODE SET
TRANSMIT
SOURCE
RECEIVER
■ When signal reception is poor
SLEEP
HDMI
1
2
1
2
3
4
3
4
When you are receiving an FM broadcast and cannot
obtain a stable stereo broadcast, you can force this
unit to receive in a monaural mode.
AV
AUDIO
5
V-AUX
[ A ]
1
2
[ B ]
DOCK
d
TUNER
FM
AM
PRESET
INFO
TUNING
e
MEMORY
ENHANCER SUR. DECODE
MOVIE
MUSIC
STEREO
STRAIGHT
SCENE
BD
DVD
TV
CD
SETUP
RADIO
OPTION
VOLUME
ENTER
RETURN
q
1
2
3
POP-UP
MENU
Press qOPTION to display the Option
menu. J1
Use jCursor B / C to select “FM Mode.”
OPTION
j
VOL.
MUTE
4
REC
1
2
3
4
5
6
7
8
9
0
10
Press jENTER and use the jCursor D /
E to select “Mono.”
985
ENT
VOL.
FMMode:Mono
TV
INPUT
TV VOL
4
You can register up to 40 FM/AM stations as preset
stations. There are two methods of presetting stations,
“Auto Preset” and “Manual Preset.” Use one of these
methods to register stations.
■ Presetting FM stations
automatically (Auto Preset)
The tuner detects FM stations with strong signals and
registers up to 40 automatically.
AM stations cannot be automatically registered. Use
manual station preset (☞p. 32).
TV CH
1
2
3
Press dTUNER to switch to the tuner input.
d TUNER
e PRESET F / G
j Cursor B / C / D / E
j ENTER
j RETURN
q OPTION
When setting is completed, press
qOPTION to close the Option menu.
To return this unit to its original settings, use the
same procedure to return the settings to “Stereo.”
Auto Preset will begin approximately 5 seconds after
you select a preset number.
If you do not select a preset number, Auto Preset will
begin approximately 5 seconds after “READY” is
displayed.
Selecting a preset number
Status
Frequency
READY
VOL.
L
SL
SW
C
R
SR
Preset number
To cancel registration, press jRETURN.
Press qOPTION to display the Option
menu. J1
During Auto Preset
Use jCursor B / C to select “Auto Preset.”
MUTE
5
Press jENTER, then press ePRESET F /
G or jCursor B / C to choose the preset
number from which to start the Auto Preset
function.
01:FM87.5MHz
FMMode
DISPLAY
TOP
MENU
Press dTUNER to switch to the tuner
input.
Registering and recalling a
frequency (Preset tuning)
OPTION
Auto Preset
VOL.
L
SL
SW
C
Search
Preset for stations
SEARCH
MEMORY
R
SR
When Auto Preset is complete
FINISH
VOL.
Auto Preset
L
SL
SW
C
R
SR
The Option menu closes automatically when presetting
is complete. J2
J 1 : See the section on “Configuring the settings specific for each
input source (Option menu)” for details on the Option menu
(☞p. 37).
J 2 : The preset with the lowest preset number will be selected
automatically immediately after presetting.
En
31
PLAYBACK
FM/AM tuning
CODE SET
TRANSMIT
SOURCE
■ Registering stations manually
RECEIVER
SLEEP
1
2
1
2
3
4
3
4
Select stations by hand and register them as presets
individually.
AV
AUDIO
5
V-AUX
[ A ]
1
2
[ B ]
DOCK
d
TUNER
FM
AM
INFO
MEMORY
MOVIE
MUSIC
PRESET
TUNING
2
STEREO
STRAIGHT
SCENE
BD
DVD
TV
CD
RADIO
OPTION
VOLUME
ENTER
RETURN
POP-UP
MENU
Tune in to the station you wish to register,
referring to “Selecting a frequency for
reception (Normal tuning)” (☞p. 30).
j
MUTE
REC
MEMORY
1
2
3
4
5
6
7
8
9
0
10
l
The newly registered frequency
VOL.
L
SL
SW
C
R
SR
Press dTUNER to switch to the tuner input.
Press qOPTION to display the Option
menu. J3
Use jCursor B / C to display “Clear
Preset” and press jENTER.
Empty, or the frequency registered
most previously.
CLEAR
Press ePRESET F / G to select the preset to register
the station to, and then press eMEMORY to register.
VOL.
01:FM98.5MHz
To cancel registration, press jRETURN or do not
operate the remote control for about 30 seconds.
Blinks
L
SL
SW
C
R
SR
Registered frequencies
VOL.
01:FM98.5MHz
L
SL
SW
C
R
SR
ENT
■ Recalling a preset station
You can call preset stations registered by automatic
station preset or manual station preset. J1
INPUT
TV VOL
1
2
3
The number of the preset to be cleared
Blinks
STEREO
TUNED
Registered frequencies
TV
Preset number
01:Empty
Press eMEMORY for 2 seconds or longer.
The station will be registered automatically to the lowest
open preset number (or the next number after the one
registered most recently).
Clearing preset stations
Press eMEMORY once, to display “Manual Preset” on
the front panel display. After a small wait, the preset
number that the station has been registered to will
appear.
985
Use one of the following methods to
register the station you are currently
receiving.
■ Registering to a preset number to which no
q
station is registered
DISPLAY
TOP
MENU
1
e
ENHANCER SUR. DECODE
SETUP
■ Designating a preset number for
registration
(Manual Preset)
HDMI
TV CH
To select a registered station, press ePRESET
F / G to select the preset number of the
station. J2
MUTE
d TUNER
e MEMORY
e PRESET F / G
j Cursor B / C
j ENTER
j RETURN
l Numeric keys
q OPTION
Press jRETURN to cancel the operation.
4
Repeat this operation to clear the registration of
multiple numbers.
5
J 1 : Preset numbers to which no stations are registered will be
skipped. “No Presets” or “No Presets in Memory” is displayed
when there are no stations are registered.
J 2 : To select a station by selecting a preset number, use the
lNumeric keys to enter the preset number of the station you
wish listen to. When an invalid number is entered, “Wrong Num.”
appears on the front panel display. Check that you have entered
the correct number.
Use jCursor B / C to select the preset
number you want to clear, and press
jENTER to clear it.
Press qOPTION to finish this operation.
J 3 : See the section on “Configuring the settings specific for each
input source (Option menu)” for details on the Option menu
(☞p. 37).
En
32
PLAYBACK
Playing back tunes from your iPod™/iPhone™
CODE SET
TRANSMIT
SOURCE
RECEIVER
SLEEP
Once you have connected a Yamaha iPod universal dock (such as the YDS-12, sold separately) to this unit, you can enjoy playback of your iPod/iPhone using the remote
control supplied with this unit. When playing back from an iPod/iPhone, you can also use the compressed music enhancer sound field programs (☞p. 29) to give
compressed audio formats such as MP3 a sharper, more dynamic sound.
HDMI
1
2
3
4
3
4
AV
1
2
AUDIO
5
V-AUX
[ A ]
1
2
[ B ]
DOCK
PRESET
TUNING
d
TUNER
FM
AM
INFO
MEMORY
MOVIE
MUSIC
•
•
•
•
iPod touch, iPod (Click and Wheel including iPod classic), iPod nano, iPod mini, iPhone, iPhone 3G, and iPhone 3GS are supported (As of March 2010).
When connecting an iPhone, please use a YDS-12.
Some features may not be compatible depending on the model or the software version of your iPod.
Some functions may not be available for some Yamaha iPod universal dock models. This explanation focuses on the YDS-12.
ENHANCER SUR. DECODE
STEREO
Connecting the Yamaha iPod
universal dock
STRAIGHT
SCENE
BD
DVD
TV
CD
SETUP
RADIO
Controlling an iPod/iPhone
After setting your iPod/iPhone in your dock, just press
dDOCK to switch to DOCK input and you can operate
your iPod/iPhone.
You can use the remote control of this unit to carry out
basic operations (playback, stop, skip etc) on your iPod/
iPhone. You can check song information on the iPod/
iPhone screen.
OPTION
VOLUME
ENTER
RETURN
DISPLAY
POP-UP
MENU
TOP
MENU
MUTE
Use the dedicated cable to connect the dock to the
j DOCK jack on the rear panel of this unit. Refer to the
operating instructions of the iPod universal dock for
information on how to connect your iPod/iPhone.
REC
k
1
2
3
4
5
6
7
8
9
0
10
CAUTION
To prevent accidents, place this unit in standby mode
before connecting an iPod universal dock.
ENT
dDOCK
Switches to the DOCK (iPod) input.
jCursor B / C
Move the cursor up and down to different
fields.
jCursor D / E
Returns to the previous menu or enter the
menu you have selected.
TV
INPUT
TV VOL
TV CH
MUTE
HDMI OUT
COMPONENT
VIDEO
d DOCK
j Cursor B / C / D / E
j ENTER
ks
ke
kp
kw
kf
kb
ka
PR
PR
PB
PB
jENTER
Y
COMPON
VIDEO
Y
MONITOR OUT
kw
Searches backwards while held down.
kf
Searches forwards while held down.
kb
Skips to the beginning of the currently
playing song. Pressing repeatedly skips
one song backwards with each press.
ka
Skips to the beginning of the next song.
OPTICA
AV
Yamaha iPod universal dock
Switch the power on and place your iPod/iPhone in the
dock. The unit is now ready for playback.
DOCK
Enters the selected menu.
ks
Stops playback.
ke
Switches between playback and pause.
kp
Switches between playback and pause.
VOL.
iPodconnected
L
SL
SW
C
R
SR
En
33
PLAYBACK
Playing back tunes from your iPod™/iPhone™
CODE SET
TRANSMIT
SOURCE
RECEIVER
■ To charge the iPod/iPhone when this unit
is in standby mode
SLEEP
HDMI
1
2
1
2
3
4
3
4
AV
AUDIO
5
V-AUX
[ A ]
1
2
[ B ]
DOCK
PRESET
TUNING
d
TUNER
FM
AM
INFO
MEMORY
MOVIE
MUSIC
ENHANCER SUR. DECODE
STEREO
STRAIGHT
SCENE
BD
DVD
TV
CD
SETUP
RADIO
OPTION
RETURN
q
VOLUME
ENTER
If you connect an iPod/iPhone to the iPod universal
dock the iPod/iPhone will always charge when this
unit is turned on.
This unit can charge an iPod/iPhone even when in
standby mode (iPod Standby Charge function).
Check the iPod CHARGE indicator ( iPod CHARGE )
on the front panel display of this unit to check
whether this unit is charging an iPod/iPhone while in
standby mode. While charging an iPod/iPhone, the
iPod charge indicator lights. The indicator goes out
when charging is finished.
j
If necessary, you can also deactivate the iPod Standby
Charge function.
DISPLAY
POP-UP
MENU
TOP
MENU
MUTE
REC
1
2
3
4
5
6
7
8
9
0
10
ENT
TV
INPUT
TV VOL
TV CH
1
2
3
Press dDOCK to switch to the DOCK
input.
Press qOPTION to display the Option
menu.
Use jCursor B / C to display “Standby
Charge” and press jENTER.
MUTE
DOCK
VOL.
Charge;;;;Auto
d DOCK
j Cursor B / C / D / E
j ENTER
q OPTION
4
5
L
SL
SW
C
R
SR
Use jCursor D / E to switch the setting
to “Off.”
When setting is completed, press
qOPTION to close the Option menu.
To re-activate the Standby Charge function carry out
this procedure again and change the “Standby
Charge” setting back to “Auto.”
En
34
PLAYBACK
Playing back tunes from Bluetooth™ components
CODE SET
TRANSMIT
SOURCE
Playing back tunes from Bluetooth™ components
RECEIVER
SLEEP
You can connect a Yamaha Bluetooth wireless audio receiver (such as the YBA-10, sold separately) to this unit and enjoy wireless playback from Bluetooth-compatible
portable music players. J1
HDMI
1
2
3
4
3
4
AV
1
2
AUDIO
5
V-AUX
[ A ]
1
2
[ B ]
DOCK
PRESET
TUNING
NOTE
d
TUNER
FM
AM
INFO
MEMORY
e
ENHANCER SUR. DECODE
MOVIE
MUSIC
STEREO
STRAIGHT
When playing back from a Bluetooth component for the first time, you must first pair the devices (register the Bluetooth components). When establishing a wireless connection
you must carry out pairing on both this unit and on the Bluetooth component.
Connecting a Yamaha Bluetooth
wireless audio receiver
Pairing Bluetooth™ components
SCENE
BD
DVD
TV
CD
SETUP
RADIO
OPTION
VOLUME
ENTER
RETURN
Use the dedicated cable to connect the dock to the
q DOCK jack on the rear panel of this unit.
The Bluetooth wireless audio receiver connection will be
j
complete when this unit is turned on.
DISPLAY
TOP
MENU
POP-UP
MENU
The Yamaha Bluetooth wireless audio receiver can be
paired with up to eight Bluetooth components. When
the ninth device is paired, the pairing settings for the
device which has not been used for the longest period
of time will be deleted.
MUTE
REC
HDMI OUT
1
Be sure to carry out pairing when connecting a Bluetooth
component for the first time, or when settings have been
deleted.
Refer to the operating instructions of your Bluetooth
component as necessary when carrying out pairing.
2
5
6
9
0
3
7
10
4
COMPONENT
VIDEO
PR
PR
PB
PB
8
ENT
TV
Y
MONITOR OUT
INPUT
TV VOL
Y
COMPON
VIDEO
TV CH
MUTE
OPTICA
AV
d DOCK
e MEMORY
j Cursor B / C
j ENTER
j RETURN
q OPTION
Yamaha Bluetooth
wireless audio receiver
CAUTION
To prevent accidents, place this unit in standby mode
before connecting a Bluetooth wireless audio receiver.
1
2
3
4
DOCK
Press qOPTION to display the Option menu
and use jCursor B / C to select “Pairing.”
OPTION
Pairing
VOL.
Searching...
L
SL
SW
C
R
SR
• To cancel pairing, press jRETURN.
• You can also press and hold eMEMORY on the front
panel to begin pairing.
5
Press dDOCK to switch to the DOCK input.
Turn on the Bluetooth component you want
to pair with and set it to pairing mode.
Press jENTER to start pairing.
Make sure the Bluetooth component
recognizes the Bluetooth wireless audio
receiver.
When the device is recognized it will appear in the
Bluetooth component list, for example as “YBA-10
YAMAHA.”
6
Select the Bluetooth wireless audio receiver
from the Bluetooth component list, and
enter a pass key “0000” into the Bluetooth
component.
When pairing occurs correctly
VOL.
L
SL
SW
C
R
SR
DOCK
VOL.
Completed
L
SL
SW
C
R
SR
J 1 : This unit supports A2DP (Advanced Audio Distribution Profile)
of the Bluetooth profile.
En
35
PLAYBACK
Playing back tunes from Bluetooth™ components
CODE SET
TRANSMIT
SOURCE
Using Bluetooth™ components
RECEIVER
SLEEP
HDMI
1
2
1
2
3
4
3
4
AV
AUDIO
5
V-AUX
[ A ]
1
2
[ B ]
DOCK
TUNER
FM
AM
INFO
MEMORY
PRESET
When pairing is complete, carry out the following
procedure to achieve a wireless connection between this
unit and the Bluetooth component. When the wireless
d connection is complete, you playback from Bluetooth
components.
Depending on Bluetooth components, a wireless
connection is established automatically or by
operating the Bluetooth components. In that case, it is
not necessary to carry out the following procedure.
TUNING
ENHANCER SUR. DECODE
MOVIE
MUSIC
STEREO
STRAIGHT
SCENE
BD
DVD
TV
CD
SETUP
RADIO
OPTION
VOLUME
ENTER
RETURN
q
DISPLAY
POP-UP
MENU
TOP
MENU
MUTE
REC
1
2
3
4
5
6
7
8
9
0
10
j
1
2
Press dDOCK to switch to the DOCK input.
Press qOPTION to display the Option
menu.
3
Use jCursor B / C to select “Connect” and
press jENTER. J1
When wireless connection is complete
DOCK
BTconnected
VOL.
L
SL
SW
C
R
SR
“Not found” is displayed when there is an error
connecting. Check that the following conditions have
been satisfied, and try to establish a wireless
connection again.
• Both this unit and the Bluetooth component are paired.
• The Bluetooth component is switched on.
• The Bluetooth component is within 32 feet (10 meters)
of the Bluetooth wireless audio receiver.
4
Operate the Bluetooth component for
playback.
To disconnect a wireless connection, repeat the same
steps, and in step 3, select “Disconnect.”
ENT
TV
INPUT
TV VOL
TV CH
MUTE
d DOCK
j Cursor B / C
j ENTER
q OPTION
J 1 : “Disconnect” is displayed when a Bluetooth component has been
connected.
En
36
SETUP
CODE SET
TRANSMIT
SOURCE
Configuring the settings specific for each input source (Option menu)
RECEIVER
SLEEP
HDMI
1
2
3
4
3
4
This receiver has a unique option menu specific for each type of input source, such as volume trim for compatible input sources, audio/video data display for signals from
external devices, and other frequently used menu items.
AV
1
2
AUDIO
5
V-AUX
[ A ]
1
2
[ B ]
DOCK
d
Option menu display and setup
5
TUNER
FM
AM
INFO
MEMORY
MOVIE
MUSIC
PRESET
1
TUNING
ENHANCER SUR. DECODE
STEREO
Use the dInput selector on the remote
control to select the Option menu you wish
to display.
STRAIGHT
SCENE
BD
DVD
TV
CD
SETUP
RADIO
OPTION
VOLUME
ENTER
RETURN
q
2
j
The Option menu appears for the desired input source.
POP-UP
MENU
OPTION
MUTE
VolumeTrim
REC
2
3
5
6
7
9
0
10
ENT
3
TV CH
MUTE
d Input selector
j Cursor B / C / D / E
j ENTER
j RETURN
q OPTION
4
sources
Input source:
All
Reduces any change in volume when switching between
input sources by correcting volume differences in each
input source. You can adjust this parameter for each
input source.
Adjustable range
-6.0 dB to 0.0 dB to +6.0 dB
Default setting
0.0 dB
Adjustment
increments
0.5 dB steps
VOL.
L
SL
SW
C
HDMI1-4
Volume
Trim
Audio In
Signal Info
AV1-2
Volume
Trim
Audio In
Signal Info
AV3-4
Volume
Trim
Signal Info
AV5
Volume
Trim
AUDIO1-2
Volume
Trim
V-AUX
Volume
Trim
TUNER
Volume
Trim
FM Mode
iPod
(DOCK)
Volume
Trim
Standby
Charge
Bluetooth
(DOCK)
Volume
Trim
Connect/
Disconnect
R
SR
Select the desired control/setup item using
jCursor B / C and press jENTER.
The displayed Option menu items differ depending on
the input source.
For details, read the following Option menu items
section.
TV
INPUT
TV VOL
Option menu items
4
8
■ Adjusting volume between input
Volume Trim
For a few seconds after closing the Option menu, the
remote control keys may not function. If this occurs,
reselect the input source.
The following menu items are provided for each input
source.
Option menu
DISPLAY
TOP
MENU
1
Press qOPTION.
To close the Option menu, press qOPTION.
Select the desired menu item (or enable a
function) using jCursor B / C / D / E and
jENTER.
Parameters of the selected item are displayed. The
parameters you can set differ depending on the menu
items.
• You can also use jRETURN to return to the previous
screen or close the Option menu.
• Certain selected menu items may automatically close
the Option menu when their functions are enabled.
Auto
Preset
Clear
Preset
Pairing
En
37
SETUP
Configuring the settings specific for each input source (Option menu)
■ Combining HDMI/AV1-2 input source
video and audio
Audio In
Input source:
■ Displaying information on audio/video
signals
Signal Info
Input source:
HDMI1-4, AV1-2
Combines video from HDMI or AV input sources with analog/
digital audio inputs in situations such as:
– an external device is connected with an HDMI cable but cannot
transmit audio through HDMI
– an external device with component video output and analog audio
output (such as certain game consoles) are connected to the
system
• “No Signal” is displayed when no signals are being received,
and “---” is displayed if this unit cannot recognize the incoming
signal.
• The bit rate may vary during playback.
HDMI1-4, AV1-4
Displays information on digital audio and video signals on the
front panel display. You can display the signal information by
pressing jENTER on the menu item and using jCursor B / C.
Menu item
FORMAT
VOL.
DolbyD
L
SL
SW
C
R
SR
Inputs that change the audio source
HDMI1
Information
VOL.
Audio;;;;;;AV1
L
SL
SW
C
R
SR
Assignable audio input jacks
To change assignments, select an input source (HDMI1-4 or AV1-2)
as the video input first, and then select audio input jacks in this
menu.
Set as follows according on the desired combination of audio input
jacks.
Audio inputs
Settings method
Optical digital audio
input
Select AV1 or AV4. Connect the external component
audio cable to the optical jack for the selected input.
Coaxial digital audio
input
Select AV2 or AV3. Connect the external component
audio cable to the coaxial jack for the selected input.
Analog audio input
Select one of AV5, AUDIO1, or AUDIO2. Connect
the external component audio cable to the audio jack
for the selected input.
• For details of settings, refer to “Receiving audio from other input
sources” (☞p. 16) and “Component connections to analog audio
output devices” (☞p. 17).
• To return audio inputs to their previous settings, display this item
again, and select the original input jack.
Audio information
FORMAT
Format of audio signals.
CHAN
The number of input signal channels (front/surround/
LFE).
For example, if input signal channels are 3 front
channels, 2 surrounds and LFE, “3/2/0.1” is
displayed.
SAMPL
The sampling frequency of analog-to-digital
conversion.
B RATE
The bit rate of input signal per second.
Video information
V IN
Format and resolution of video input signal.
V OUT
Format and resolution of video output signal.
V.MSG
(appears only
when an error
has occurred)
Error messages about HDMI signals and components.
Error message
HDCP Error
HDCP authentication failed.
Device Over The number of connected HDMI
components is over the limit.
En
38
SETUP
Configuring the settings specific for each input source (Option menu)
■ Changing FM mode (Stereo/Monaural)
FM Mode
Input source:
■ Bluetooth™ wireless connections
Connect
TUNER
Sets this unit to automatically match FM broadcast frequencies in
stereo, or to convert the frequency to monaural (☞p. 31).
Disconnect
Input source:
Bluetooth (DOCK)
stations
Enables/disables the Bluetooth wireless connection (☞p. 36).
Select “Connect” to establish the wireless connection. Select
“Disconnect” to disable the wireless connection.
Auto Preset
■ Pairing the Bluetooth™ wireless audio
■ Automatically presetting FM radio
Input source:
TUNER
Automatically detects radio stations in the FM frequency and
registers them as preset stations (☞p. 31).
■ Clearing preset FM stations
receiver and your Bluetooth component
Pairing
Input source:
Bluetooth (DOCK)
Pairs your Bluetooth wireless device and this receiver (☞p. 35).
Clear Preset
Input source:
TUNER
Clears the preset stations (☞p. 32).
■ Charging an iPod™/iPhone™ in standby
mode
Standby Charge
Input source:
iPod (DOCK)
Charges an iPod/iPhone stationed in the iPod universal dock while
the receiver is in standby mode (☞p. 34).
En
39
SETUP
Setting various functions (Setup menu)
CODE SET
TRANSMIT
SOURCE
RECEIVER
SLEEP
You can configure various function settings of this unit using the Setup menu.
HDMI
1
2
3
4
3
4
AV
1
2
Setup menu display and settings
AUDIO
5
V-AUX
[ A ]
1
2
[ B ]
DOCK
1
TUNER
FM
AM
INFO
MEMORY
MOVIE
MUSIC
PRESET
TUNING
Press iSETUP on the remote control.
HDMI
SETUP
ENHANCER SUR. DECODE
STEREO
L
SL
SW
C
TV
CD
SETUP
RADIO
i
OPTION
VOLUME
ENTER
RETURN
POP-UP
MENU
2
Use the jCursor B / C to select the desired
menu and press jENTER.
Setup menu categories
DISPLAY
TOP
MENU
j
MUTE
REC
1
2
3
4
5
6
7
8
9
0
10
Speaker Setup
Manages settings for speakers.
Sound Setup
Manages settings for audio output.
Func. Setup
Manages settings to make receiver
operation easier, such as input source
labeling and auto-standby functions.
DSP Parameter
Sets parameters for sound field programs.
Memory Guard
Protects settings against accidental
alteration.
ENT
TV
TV CH
MUTE
i SETUP
j Cursor B / C / D / E
j ENTER
j RETURN
SOUND
Lipsync
Ex: Sound Setup menu
SW
C
R
SR
SW
C
Config
R
SR
Subwoofer
Front
Center
4
5
When multiple items appear, use jCursor
B / C to select the desired item.
6
Sur. LR
Crossover
SWFR Phase
Press jCursor D / E to change the setting.
You can change other items by repeating step 4 and 5.
Press iSETUP to exit the Setup menu.
For a few seconds after closing the Setup menu, the
remote control keys may not function. If this occurs,
reselect the input source.
VOL.
L
SL
L
SL
You can also use jRETURN to return to the
previous screen.
INPUT
TV VOL
Setup menu
R
SR
SCENE
BD
DVD
Setup menu items
Speaker Setup
VOL.
Audio;;;;;;Amp
VOL.
SpeakerSetup
STRAIGHT
3
Use jCursor B / C to navigate the
submenus to find the desired setting and
press jENTER.
Extra Bass
Level
Distance
Equalizer
Test Tone
Sound Setup
Lipsync
(speakers)
(unit and speakers)
(speakers and frequency
bands)
HDMI Auto
Auto
Manual
Adaptive DRC
D.Range
Max Volume
Init.Volume
HDMI Audio Out
Func. Setup
Input Rename
AutoPowerDown
Dimmer
DSP Parameter
Memory Guard
En
40
SETUP
Setting various functions (Setup menu)
■ Manual speaker setup
Manages settings for speakers
Config
SETUP
Adjusts the output characteristics of the speakers based on
manually set parameters.
VOL.
SpeakerSetup
L
SL
SW
C
In the Config submenu, you can select the speaker size
characteristic (Large or Small). Select the size (sound
reproduction capacity) that matches your speakers.
Manually manages speaker configuration, such as
speaker size (sound production capacity), and bass
audio processing.
Level
Manually adjusts the volume of each speaker.
Distance
Manually adjusts the output of each speaker based on
distance to the listening point.
Equalizer
Selects an equalizer to adjust speaker output
characteristics.
Test Tone
Small (Default)
Select this for small speakers. The subwoofer will
produce front channel low-frequency
components. J3
Large
Select this for large speakers. The front speakers will
produce all of the front channel frequency
components.
R
SR
Speaker Setup submenu
Config
Front
Selects the size (sound reproduction capacity) of the front
speakers. J2
Generates test tones.
Center
Selects the size of the center speakers.
Woofer diameter
• 16 cm or larger → Large
• 16 cm or smaller → Small
When speaker size is set to “Small,” low-frequency components
of the speakers that you configured are produced from the
subwoofer (or from the front speakers if there is no subwoofer).
Subwoofer
Confirms the subwoofer.
Yes (Default)
None
J 1 : Enabling the “Extra Bass” setting allows both the subwoofer and the front
speakers to produce bass audio.
J 2 : When “Subwoofer” is set to “None,” you can only choose “Large.” If the front
speaker setting is “Small” and you change “Subwoofer” to “None,” it will
automatically change to “Large.”
Select this when you have a subwoofer connected.
During playback, the subwoofer will produce audio
from the LFE (low-frequency effect) channel and bass
audio from other channels. J1
None
Select this when there is no center speaker. The front
speakers will produce center channel audio.
Small (Default)
Select this when a small center speaker is connected.
Large
Select this when a large center speaker is connected.
Sur. LR
Selects the size of the surround speakers.
None
Select this when no surround speakers are connected.
The front speakers will produce surround channel
audio signals.
Small (Default)
Select this when the surround speakers are small.
Large
Select this when the surround speakers are large.
Select this when you do not have a subwoofer
connected. The front speakers will produce audio
from the LFE (low-frequency effect) channel and bass
frequency audio from other channels.
J 3 : Enabling the “Crossover” setting allows you to set the frequency components
of audio signals transmitted from the front speakers to the subwoofer.
En
41
SETUP
Setting various functions (Setup menu)
Crossover
Sets the lower limit of low-frequency component output from
speakers set to “Small.”
Audio with a frequency below that limit will be produced from the
subwoofer or the front speakers. J1
■ Controlling the volume of each speaker
Level
Distance
Separately adjusts the volume of each speaker. Use jCursor B /
C to select the desired speaker and adjust the volume with
jCursor D / E.
40Hz
110Hz
60Hz
120Hz
FL
Front speaker L
80Hz (Default)
160Hz
FR
Front speaker R
90Hz
200Hz
C
Center speaker
SL
Surround speaker L
SR
Surround speaker R
SWFR
Subwoofer
100Hz
SWFR Phase
Sets the phase of the subwoofer if the bass audio is lacking or
unclear.
NRM (Default)
Does not change the subwoofer phase.
REV
Reverses the subwoofer phase.
Extra Bass
Allows the front channel low-frequency components to be
produced exclusively by the subwoofer, or by both the subwoofer
and the front speakers.
On
The subwoofer and the front speakers produce the
front channel low-frequency components.
Off (Default)
Depending on the size of the front speakers, either the
front speakers or the subwoofer produce the front
channel low-frequency components.
■ Manually setting speaker distance
Adjusts the timing at which the speakers produce audio so that
sounds from the speakers reach the listening position at the same
time.
Selecting adjustment units
Use jCursor B / C to display “Unit,” and then use jCursor D
/ E to choose the units of length (feet or meters).
Setting distances for each speaker
Use jCursor B / C to display the speaker you want to configure,
and then use jCursor D / E to set the distance from the speaker
to your listening position.
Unit
Selects the distance unit (feet or meters).
Adjustable range
-10.0 dB to +10.0 dB
Front L
Front speaker L
Default setting
0 dB (FL / FR / SWFR)
-1.0 dB (C / SL / SR)
Front R
Front speaker R
Center
Center speaker
0.5 dB
Sur. L
Surround speaker L
Sur. R
Surround speaker R
SWFR
Subwoofer
Adjustable range
1.0 ft to 80.0 ft (0.30 m to 24.0 m)
Default setting
10.0 ft (3.00 m) (Front L/Front R/SWFR)
8.5 ft (2.60 m) (Center)
8.0 ft (2.40 m) (Sur. L/Sur. R)
Adjustment
increments
0.5 ft (0.10 m)
Adjustment
increments
When the “Subwoofer” is set to “None,” the “Extra Bass”
setting is disabled.
J 1 : If your subwoofer has a volume control or a crossover frequency control, set
the crossover frequency to maximum and the volume to half (or slightly less).
En
42
SETUP
Setting various functions (Setup menu)
■ Adjusting sound quality with the equalizer
■ Generating test tones
3
Equalizer
Adjusts sound quality and tune with a graphic equalizer.
Raising volume: Press jCursor E.
Lowering volume: Press jCursor D.
EQ Select
Turns the graphic equalizer on or off. By selecting GEQ and
pressing jENTER, you can adjust the characteristics of the
graphic equalizer.
GEQ (Default)
Uses the graphic equalizer to adjust sound quality.
Off
Does not activate the equalizer.
When “EQ Select” is displayed, use jCursor D / E
to select “GEQ” and press jENTER.
Check that “Channel” appears and use jCursor
D / E to select the speaker for which you want to
adjust the equalizer.
GEQ
GEQ
VOL.
63Hz
Frequency band
■ Adjusting the graphic equalizer
1
2
Press jCursor C repeatedly to select the
frequency you want to adjust, then use jCursor D
/ E to adjust the volume.
VOL.
Channel;FRNT L
L
SL
SW
C
R
SR
L
SL
SW
C
Test Tone
Turns the test tone generator on or off.
Off (Default)
Does not generate test tones.
On
Generates test tones. While “On” is selected, test
tones are produced constantly.
R
SR
Setting the volume level for
the selected frequency
Frequency
range
63 Hz/160 Hz/400 Hz/1 kHz/2.5 kHz/6.3 kHz/
16 kHz
Adjustable
range
-6.0 dB to 0 dB to +6.0 dB
Default setting
0 dB
Adjustment
increments
0.5 dB
You can use the test tone in a variety of circumstances. For
example, you can adjust the volume balance settings for each
speaker, or whenever you adjust the settings on the internal
graphic equalizer, you can listen to the actual effect while
operating this unit. Turn the test tone off when you have finished
making adjustments.
You can use jCursor B / C to select another frequency or
return to step 2. Repeat steps 2-3 to adjust the tone to your
liking.
The speaker you are adjusting
4
When you have finished making adjustments,
press iSETUP to close the Setup menu.
En
43
SETUP
Setting various functions (Setup menu)
SoundSetup
Lipsync
Adjusts the delay between audio and video output (Lipsync
function).
VOL.
L
SL
SW
C
R
SR
Sound Setup submenu
Lipsync
Adjusts the delay between video and audio output.
Adaptive DRC
Auto-adjusting the sound level to make even low
volumes more audible.
D.Range
Selects the dynamic range adjustment method for
digital audio playback.
Max Volume
Sets the maximum volume for this receiver.
Init.Volume
Sets the initial volume for when this receiver is turned
on.
HDMI Audio Out
Selects audio signals received through the HDMI
input jack.
HDMI Auto
When connecting to a TV via HDMI, automatically adjusts output
timing if the TV supports an automatic lipsync function.
Off (Default)
On
Select this when the connected TV does not support
the automatic lipsync function or you do not wish to
use the automatic lipsync function. Set the correction
time in “Manual.”
Select this when the TV supports the automatic
lipsync function. Fine-adjust the correction time in
“Auto.”
Auto
Fine-adjust the audio output timing by entering the correction time
provided when “HDMI Auto” is set to “On.”
Adjustable range
0 ms to 240 ms
Adjustment
increments
1 ms
■ Auto-adjusting the sound level to make
even low volumes more audible
Adaptive DRC
Adjusts the dynamic range in conjunction with the volume level
(from minimum to maximum). When you play audio at night or at
low volumes, it is a good idea to set parameter to “Auto.” J1
Auto
Adjusts the dynamic range automatically.
Off (Default)
Does not adjust the dynamic range automatically.
When the auto function is enabled, it adjusts the dynamic range as
follows.
Auto
Off
Input Level
Volume: low
Output Level
SETUP
■ Synchronizing audio/video output
Output Level
Setting the audio output function of this
unit
Auto
Off
Input Level
Volume: high
Manual
Manually adjusts the correction time. Select this when the TV does
not support the automatic lipsync function or “HDMI Auto” is set
to “Off.”
Adjustable range
0 ms to 240 ms
Adjustment
increments
1 ms
Default setting
0 ms
J 1 : The Adaptive DRC setting is also effective when you use headphones.
En
44
SETUP
Setting various functions (Setup menu)
■ Auto-adjusting Dolby Digital and DTS
dynamic range
D.Range
Selects the dynamic range adjustment method for audio bitstream
(Dolby Digital and DTS) playback.
■ Setting the startup volume
Init.Volume
Sets the initial volume for when this receiver is turned on. When
this parameter is set to “Off,” the volume is set at the level when the
receiver last entered standby mode. J1
Max (Default)
Produces audio without adjusting the dynamic range.
Adjustable range
Off, Mute, -80 dB to +16.5 dB
STD
Sets the standard dynamic range suitable for home
use.
Default setting
Off
Sets the dynamic range at the lowest level for
playback. This is useful for low-volume audio.
Adjustment
increments
0.5 dB
Min
■ Setting the maximum volume
Max Volume
■ Changing the output destination of HDMI
input audio signals
HDMI Audio Out
Sets a maximum volume level so that the audio is not played too
loudly. The default setting of +16.5 dB produces the highest
volume.
Adjustable range
-30.0 dB to +15.0 dB / +16.5 dB (Maximum volume)
Default setting
+16.5 dB
Adjustment
increments
5.0 dB
Choose whether to playback audio from an external component
such as a BD/DVD player connected via HDMI through this unit or
through a TV.
Amp (Default)
Outputs audio through this unit only. When this
setting is selected, the external component outputs an
audio format compatible with this unit.
TV
Outputs audio through a TV only. When this setting is
selected, the external component outputs an audio
format compatible with the TV. J2
Amp+TV
Outputs audio from the TV and this unit. When this
setting is selected, the external component outputs an
audio format compatible with this unit and TV.
J 1 : When you set the “Max Volume” at a lower level than “Init.Volume,” the “Max
Volume” setting has priority.
J 2 : When “TV” is selected, the speakers of this unit do not output sound.
En
45
SETUP
Setting various functions (Setup menu)
CODE SET
TRANSMIT
SOURCE
Making the receiver easier to use
RECEIVER
SLEEP
HDMI
1
2
3
4
3
4
3
AV
1
2
SETUP
AUDIO
5
V-AUX
[ A ]
1
2
[ B ]
DOCK
Func.Setup
L
SL
SW
C
R
SR
Func. Setup submenu
AM
PRESET
INFO
MEMORY
MOVIE
MUSIC
Input Rename
Changes the input source names.
AutoPowerDown
Goes into standby mode.
Dimmer
Sets the Brightness of the front panel
display.
STEREO
STRAIGHT
SCENE
TV
CD
SETUP
Blu-ray
Satellite
DVD
VCR
SetTopBox
Tape
Game
MD
TV
PC
DVR
iPod
CD
HD DVD
CD-R
(blank)
HDMI1
RADIO
i
VOLUME
ENTER
DISPLAY
TOP
MENU
POP-UP
MENU
j
■ Changing input source names
Input Rename
MUTE
REC
1
2
3
4
5
6
7
8
9
0
10
ENT
Changes the input source names to be shown on the front
panel display.
You can change an input source name by choosing from
a list of templates, or make one of your own.
4
TV VOL
TV CH
MUTE
4
HDMI1
To cancel a name change, select the original name
and then press jRETURN to exit renaming.
HDMI1
i SETUP
j Cursor B / C / D / E
j ENTER
j RETURN
1
VOL.
L
SL
SW
C
R
SR
HDMI1
Renaming the input source
2
Select the input source that you want to
rename using jCursor B / C.
5
6
A to Z, a to z
0 to 9
Symbols (#, *, -, +, etc.)
Space
Repeat step 4 until you have entered the
new input source name.
Confirm the new display name by
pressing jENTER. Press iSETUP to
exit the Setup menu.
To cancel a name change, press jRETURN.
Select “Input Rename” from the Setup
menu and press jENTER.
HDMI1
Use jCursor B / C to select the
characters you wish to change, and use
jCursor D / E to enter those characters.
•
•
•
•
Confirm the new display name by
pressing jRETURN. Press iSETUP to
exit the Setup menu.
■ Entering an original name
Select “Input Rename” from the Setup
menu and press jENTER.
R
SR
The following characters are available for input
source.
■ Selecting a template
1
SW
C
L
SL
Cursor
TV
INPUT
VOL.
HDMI1
OPTION
RETURN
Press jENTER.
TUNING
ENHANCER SUR. DECODE
BD
DVD
3
VOL.
TUNER
FM
Use jCursor D / E to select a new name
from the following templates.
VOL.
L
SL
SW
C
R
SR
Renaming the input source
2
Select the input source that you want to
rename using jCursor B / C.
En
46
SETUP
Setting various functions (Setup menu)
■ Goes enter standby mode automatically
when you leave it without operating
Setting sound field program parameters
You can set the parameters for the sound field programs (☞p. 48).
AutoPowerDown
If you do not operate this unit or use the remote control for an
extended period of time, it will automatically go into standby mode
(Auto Power Down function). This function’s default setting is
“Off.” When you wish to activate this function, set the amount of
time to pass before this unit will enter standby.
Off (Default)
Auto Power Down function is disabled.
4hours
Goes into standby mode, when you have not operated
this unit for four hours.
8hours
Goes into standby mode, when you have not operated
this unit for eight hours.
12hours
Goes into standby mode, when you have not operated
this unit for twelve hours.
This unit starts a countdown of 30 seconds before entering the
standby mode. Pressing any key of the remote control during the
countdown cancels entering the standby mode and reset the
timer.
SETUP
VOL.
DSPParameter
L
SL
SW
C
R
SR
Prohibiting setting changes
SETUP
Memory Guard
VOL.
L
SL
SW
C
R
SR
Prohibits setting changes to prevent careless changes being made
to the settings on Setup menu.
Off (Default)
Settings are not protected.
On
Prohibits changes to the settings on Setup menu until
it is returned to “Off.”
While set to “On,” the unit displays “Memory
Guard!” when an attempt is made to change the
settings.
■ Setting the brightness of the front panel
display
Dimmer
Sets the brightness of the front panel display. Lowering the setting
dims the display.
Adjustable range
-4 to 0
Default setting
0
En
47
SETUP
Setting sound field program parameters
CODE SET
TRANSMIT
SOURCE
RECEIVER
SLEEP
Although the sound field programs would satisfy you as they are with the default parameters, you can arrange the effect by setting the sound field elements (parameters).
To adjust the sound effects suitable for acoustical conditions of audio/video sources or rooms, perform the following operations.
HDMI
1
2
3
4
3
4
AV
1
2
AUDIO
5
V-AUX
[ A ]
1
2
[ B ]
DOCK
Setting sound field parameters
4
TUNER
FM
PRESET
INFO
1
2
AM
TUNING
MEMORY
ENHANCER SUR. DECODE
MOVIE
MUSIC
STEREO
STRAIGHT
SCENE
BD
DVD
TV
CD
SETUP
RADIO
SETUP
VOLUME
ENTER
DSPPRM
Use jCursor B / C to select “DSP
Parameter” and press jENTER.
VOL.
DSPParameter
j
Sound field parameter
L
SL
SW
C
R
SR
DISPLAY
POP-UP
MENU
TOP
MENU
MUTE
REC
1
2
3
4
5
6
7
8
9
0
10
3
Use jCursor D / E to choose the sound
field program you want to edit.
DSPPRM
Sci-Fi
ENT
TV
Sound field program to be edited
INPUT
TV VOL
TV CH
MUTE
i SETUP
j Cursor B / C / D / E
j ENTER
VOL.
L
SL
SW
C
R
SR
DSP Level
Change the effect level (level of the sound field effect to
be added). You can adjust the level of the sound field
effect while checking the sound effect.
VOL.
DSPLevel;;0dB
i
OPTION
RETURN
Press iSETUP to display the Setup menu.
■ CINEMA DSP parameters
Press jCursor B / C to select the
parameter that you want to change, and
press jCursor D / E to change the
parameter.
L
SL
SW
C
-6 dB to 0 dB to +3 dB
Default setting
0 dB
Choices
When there are multiple parameters in the sound field
program you are configuring, repeat step 4 as
necessary to change other parameters.
5
Adjustable range
R
SR
Once you have completed editing, press
iSETUP to close the Setup menu.
Adjust “DSP Level” as follows:
• The effect sound is too soft.
• There are no differences between effects of the sound
field programs.
→ Increase the effect level.
• The sound is dull.
• The sound field effect is added too much.
→ Reduce the effect level.
■ To initialize the sound field parameters
To set the parameters of the sound field program back
to default, press jCursor C repeatedly during
editing to select “Initialize” and press jCursor E.
When “Press Again >” is displayed, press jCursor
E again to initialize.
DSPPRM
Initialize
VOL.
L
SL
SW
C
R
SR
To cancel operations, press jCursor D when “Press
Again” appears and return to the original display.
En
48
SETUP
Setting sound field program parameters
■ Parameters usable in certain sound field
programs
EFCT LVL
2ch Stereo only
Adjusts the effect level of the compressed music enhancer mode.
Direct
Automatically bypasses the DSP circuit and tone control circuit
depending on the condition of tone control etc., when an analog
sound source is played back. You can enjoy a higher quality sound.
Auto (Default)
Off
Straight Enhancer/5ch Enhancer only
Outputs sound by bypassing the DSP circuit and tone
control circuit when both tone controls of “Bass” and
“Treble” are set to 0dB.
Does not bypass the DSP circuit and tone control
circuit.
5ch Stereo only
CT Level
Adjusts the center channel volume. J1
Adjustable range
0 to 100%
Default setting
100%
SL Level
Adjusts the volume of the surround L channel. J1
High (Default)
Standard effect.
Low
Sets when the high-frequency signals of the source are
emphasized excessively.
■ Parameters usable in surround decoder
q PLII Music only
Dimension
Adjusts the difference in level between the front sound field and
the surround sound field. You can adjust the difference in level
created by the software being played back to obtain the preferred
sound balance.
The surround sound gets stronger as you make the value more
negative, and the front sound gets stronger as you make the value
more positive.
Adjustable range
-3 to STD to +3
Default setting
STD (Standard)
Panorama
Adjusts the soundscape of the front sound field. Sends front left/
right channels sounds to the surround speakers as well as the front
speakers for a wraparound effect.
Off (Default)
Disables the effect.
On
Enables the effect.
CT Width
Spreads the center channel sound to the front left and right
speakers to suit your needs or preferences. Set this parameter to 0
for outputting the center sound from the center speaker only, or to 7
for outputting it from the front left/right speaker only.
Adjustable range
0 to 100%
Adjustable range
0 to 7
Default setting
100%
Default setting
3
SR Level
Adjusts the volume of the surround R channel. J1
Adjustable range
0 to 100%
Default setting
100%
J 1 : Not displayed when speakers are set to be inactive.
En
49
SETUP
Controlling other components with the remote control
CODE SET
TRANSMIT
SOURCE
RECEIVER
SLEEP
c
You can operate an external component such as TV and DVD player with the remote control of this unit by setting the code for external component (remote control code).
The remote control code can be set for each input source. Individual setting allows you to switch external components seamlessly depending on the selected input source.
HDMI
1
2
3
4
3
4
AV
1
2
AUDIO
5
V-AUX
[ A ]
1
2
[ B ]
DOCK
PRESET
TUNING
d Selecting input source connected to DVD
player
Keys connecting external
components
Default remote control code
settings
TUNER
FM
AM
INFO
MEMORY
MOVIE
MUSIC
DVD player
ENHANCER SUR. DECODE
STEREO
STRAIGHT
SCENE
BD
DVD
TV
CD
SETUP
RADIO
OPTION
RETURN
POP-UP
MENU
CD player
j
Selecting input source connected to CD
player
DISPLAY
TOP
MENU
Playback/Stop
q
VOLUME
ENTER
i
MUTE
REC
k
1
2
3
4
5
6
7
8
9
0
10
DVD player
l
TV VOL
TV CH
m
Playback/Stop
MUTE
CD player
c SOURCE A
d Input selector
i SETUP
j Cursor B / C / D / E
j ENTER
j RETURN
k External component
operation keys
k DISPLAY
l Numeric keys
m TV control keys
m INPUT
m MUTE
m TV VOL +/m TV CH +/mA
q OPTION
cSOURCE A
Switches an external component on and off.
jCursor, jENTER, jRETURN
Operates the menus of external components.
kDISPLAY
Switches an external component display.
kExternal component operation keys
Functions as a recording or playback key of an external
component, or a menu display key.
lNumeric keys
Functions as numeric keys of an external component.
ENT
TV
INPUT
The remote control keys for controlling external
components are available only when the external
components have corresponding control keys.
If you are unable to operate this unit after operating an
external component, press iSETUP or qOPTION
and then try operating the remote control again.
J 1 : You can register remote control codes for external components to
dInput selector and remote control codes for TVs in mA
(mTV control keys).
To register a TV remote control code to dInput selector:
You can use the jCursor, lNumeric keys, and mTV
mTV control keys J1
The following remote control codes are assigned to input
sources as factory default settings. For a complete list of
available remote control codes, please refer to “Remote
Control Code Search” in the CD-ROM.
Input
Category
Manufacturer
Remote
control code
HDMI1
Blu-ray
player/
recorder
Yamaha
2064
HDMI2
—
—
—
HDMI3
—
—
—
HDMI4
—
—
—
AV1
—
—
—
AV2
—
—
—
AV3
CD player
Yamaha
5095
AV4
—
—
—
AV5
—
—
—
mINPUT
Switches video inputs of TV
AUDIO1
—
—
—
mMUTE
Mutes TV volume temporarily.
AUDIO2
—
—
—
mTV VOL +/-
Controls the volume of TV
V-AUX
—
—
—
mTV CH +/-
Switches TV channels.
A/B J2
—
—
—
mA
Turns on and off TV
DOCK
DOCK
Yamaha
5089
TUNER
Tuner
Yamaha
5085
To register a remote control code for a device other than a TV to
dInput selector:
You can use the jCursor and lNumeric keys etc to control
external components, and the mTV control keys to control
TVs registered in mA.
J 2 : Use A/B for external component operations only. Set these keys to
remote control codes if you want to perform external component
operations without linking to input source selection of this unit.
For example, it may be convenient to assign remote control codes
for devices such as TVs.
control keys to control a TV you have registered.
En
50
SETUP
Controlling other components with the remote control
CODE SET
TRANSMIT
SOURCE
n
RECEIVER
SLEEP
MI
1
2
1
2
3
4
3
4
d
Registering remote control codes
for external component operations
AV
AUDIO
5
V-AUX
[ A ]
1
2
[ B ]
DOCK
The following section describes how to register remote
control code using an example of the registration of the
remote control codes of a Yamaha BD player connected
to HDMI2 jack.
TUNER
FM
AM
PRESET
INFO
TUNING
MEMORY
ENHANCER SUR. DECODE
MOVIE
MUSIC
STEREO
STRAIGHT
SCENE
BD
DVD
TV
CD
SETUP
RADIO
h
OPTION
VOLUME
ENTER
RETURN
DISPLAY
POP-UP
MENU
TOP
MENU
MUTE
REC
• Perform each of the following steps within 1 minute.
Settings will be automatically stopped if more than 1
minute passes since the last operation. To reset, repeat
from step 2.
• Remote control code of an external component cannot
be set from the name or model number of a unit. Use
“Remote Control Code Search” in the CD-ROM to
search the available remote control codes from the
category or manufacturer of external components.
• If multiple remote control codes exist, first set the first
code in the list, if it does not work then try the other
codes.
3
4
Press dHDMI2 on the remote control to
switch the input source to HDMI2. J1
Perform the following steps to register the selected
input source here to the remote control code.
To switch between BD player linked to
scene selections, press hSCENE and at the
same time press dHDMI2 and hold it for
approximately 3 seconds.
Enter a remote control code “2064” using
lNumeric keys. J2
Then you can operate the external components by
switching the input source to HDMI2, or selecting
HDMI2 in the registered scene.
2
6
0
4
Once the remote control code is registered successfully
the remote control will blink twice.
5
Same steps for operating other external components,
press hSCENE and at the same time press the input
source key selected in step 3 and hold it for
approximately 3 seconds.
Registration successful: blinks twice
Registration failed: blinks 6 times
TRANSMIT
SOURCE
CODE SET
RECEIVER
SLEEP
HDMI
1
2
3
4
5
6
7
8
9
0
10
l
1
ENT
TV
INPUT
TV VOL
TV CH
m
MUTE
Use “Remote Control Code Search” in the CDROM to search the available remote control
codes from the category or manufacturer of
external components.
“2064” can be used for a Yamaha BD player.
d HDMI2
h SCENE
l Numeric keys
m TV control keys
mA
n CODE SET
2
• If the registration fails, repeat the step 2.
• In case of an external component with multiple remote
control codes, the other remote control codes may be
supported. Repeat from step 2 with the other remote
control codes.
Press nCODE SET on the remote control
using a pointed object such as the tip of a
ballpoint pen.
J 1 : When you want to register a remote control code to the mTV
control keys, press mA (mTV control keys) in step 3.
J 2 : When you want to register a remote control code to the mTV
control keys, enter the TV remote control code in step 4.
En
51
SETUP
Controlling other components with the remote control
CODE SET
TRANSMIT
SOURCE
n
RECEIVER
SLEEP
Resetting all remote control codes
HDMI
1
2
1
2
3
4
3
4
Resetting all remote control codes for external
components to the initial factory settings.
AV
AUDIO
5
V-AUX
[ A ]
1
2
[ B ]
DOCK
AM
INFO
MEMORY
MOVIE
MUSIC
PRESET
TUNING
STEREO
STRAIGHT
1
SCENE
TV
CD
SETUP
RADIO
OPTION
8
9
1
Once the remote control code is registered
successfully the remote control will blink twice.
Registration successful: blinks twice
Registration failed: blinks 6 times
ENHANCER SUR. DECODE
BD
DVD
Enter “9981” using lNumeric keys.
9
Perform each of the following steps within 1 minute.
Settings will be automatically stopped if more than 1
minute passes since the last operation. To reset, repeat
from step 2.
TUNER
FM
3
i
Press nCODE SET on the remote control
using a pointed object such as the tip of a
ballpoint pen.
TRANSMIT
SOURCE
CODE SET
RECEIVER
SLEEP
RETURN
blinks twice
VOLUME
ENTER
HDMI
If setup fails, repeat from step 1.
DISPLAY
POP-UP
MENU
TOP
MENU
TRANSMIT
MUTE
REC
SOURCE
CODE SET
RECEIVER
SLEEP
HDMI
1
2
3
4
5
6
7
8
9
0
10
ENT
l
2
Press iSETUP on the remote control.
TV
INPUT
TV VOL
TV CH
MUTE
i SETUP
l Numeric keys
n CODE SET
En
52
SETUP
Extended functionality that can be configured as needed (Advanced Setup menu)
The Advanced Setup menu can be used for unit initialization and other useful extended functions. The Advanced Setup menu can be operated as follows.
Displaying/Setting the Advanced Setup
menu
3
Use PROGRAM to select the item to be set from the
following items.
Setting the impedance of speakers
In the Advanced Setup menu, you can set the following settings.
1
2
Set this unit to the standby mode.
Press A while pressing and holding STRAIGHT on
the front panel.
Release the keys when “ADVANCED SETUP” is displayed on
the front panel display.
After approximately 3 seconds, the top menu items are displayed.
A
STRAIGHT
INFO
MEMORY
PRESET
FM
AM
SCENE
BD
DVD
PHONES
INPUT
TONE CONTROL
TV
CD
PROGRAM
SP IMP.
Sets the impedance of speakers.
REMOTE ID
Changes the remote control ID of a receiver.
INIT
Initializes various settings for this unit.
4
5
Press STRAIGHT a few times to select the value you
wish to change.
SPIMP.-8MIN
Changes the unit settings depending on the impedance of the
speakers connected. J1
6 MIN
Select the impedance when 6Ω speakers are
connected.
8 MIN (Default)
Select the impedance when speakers above 8Ω are
connected.
Switch this unit to the standby mode, and then
switch it on again.
The settings become effective and the unit is powered on. If
initialization is selected, it will be performed when the unit is
powered on again.
RADIO
STRAIGHT
SILENT CINEMA
PROGRAM l / h
SPIMP.-8MIN
J 1 : For detailed procedures of speaker impedance settings, refer to “Changing
speaker impedance” (☞p. 10).
En
53
SETUP
Extended functionality that can be configured as needed (Advanced Setup menu)
CODE SET
TRANSMIT
SOURCE
n
RECEIVER
SLEEP
HDMI
1
2
1
2
3
4
3
4
AV
Avoiding crossing remote control
signals when using multiple
Yamaha receivers
AUDIO
5
V-AUX
[ A ]
1
2
[ B ]
DOCK
■ To change the remote control ID
Initializing various settings for this
unit
Perform each of the following steps within 1 minute.
Settings will be automatically stopped if more than
1 minute passes since the last operation. To reset,
repeat from step 1.
INIT-CANCEL
TUNER
FM
AM
INFO
MEMORY
MOVIE
MUSIC
PRESET
ENHANCER SUR. DECODE
STEREO
STRAIGHT
SCENE
BD
DVD
TV
CD
SETUP
RADIO
OPTION
VOLUME
ENTER
RETURN
DISPLAY
POP-UP
MENU
TOP
MENU
REMOTEID-ID1
TUNING
The remote control of the unit can only receive signals
from a receiver which has an identical ID (remote
control ID). When using multiple Yamaha AV receivers,
you can set each remote control with a unique remote
i control ID for its corresponding receiver.
On the contrary, if you are setting the same remote
control ID for all receivers, you can use one remote
control to operate 2 receivers.
MUTE
ID1 (Default)
Receives the remote control signals set in
ID1.
ID2
Receives the remote control signals set in
ID2.
REC
1
2
3
4
5
6
7
8
9
0
10
TV
INPUT
TV VOL
TV CH
MUTE
i SETUP
l Numeric keys
n CODE SET
l
ENT
ID1 is set for both remote control and receiver by
default. To avoid crossing remote control, change the
remote control ID for both remote control and
receiver.
1
Press nCODE SET on the remote control
using a pointed object such as the tip of a
ballpoint pen.
2
3
Press iSETUP on the remote control.
Enter the desired remote control ID code.
Initializes various settings stored in this unit and sets it
back to default.
Select the items to be initialized from the following.
DSP PARAM
Initializes all parameters for the sound
field programs.
ALL
Resets this unit to default factory settings.
CANCEL (Default)
Does not initialize.
To switch to ID1:
Enter “5019” using lNumeric keys.
To switch to ID2:
Enter “5020” using lNumeric keys.
Once the remote control code is registered
successfully the remote control will blink twice.
Registration successful: blinks twice
Registration failed: blinks 6 times
TRANSMIT
SOURCE
CODE SET
RECEIVER
SLEEP
HDMI
• If setup fails, repeat from step 1.
• Returns to ID1 after the remote control code is
initialized (☞p. 52).
En
54
APPENDIX
Troubleshooting
Refer to the table below when this unit does not function properly.
If the problem you are experiencing is not listed below, or if the instructions below do not help, turn off this unit, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service
center.
General
Problem
Cause
Remedy
See
page
The power will not
turn on.
The protection circuitry operated
three times consecutively.
As a safety precaution, when the protection
circuitry operates three times consecutively,
the capability to turn on the power is
disabled. Please contact your nearest
Yamaha dealer or service center to request
repair.
—
The unit enters
standby mode soon
after the power is
turned on.
The power cable is not completely
inserted.
Connect the power cable properly to an AC
wall outlet.
—
The speaker impedance settings
are incorrect.
Set the speaker impedance to match your
speakers.
(When this unit is turned back on
and “CHECK SP WIRES!” is
displayed.) The protection
circuitry has been activated
because this unit was turned on
while a speaker cable was shorted.
Make sure that all speaker cables between
this unit and speakers are connected
properly.
The internal microcomputer is
hung-up due to an external electric
shock (such as lightning or
excessive static electricity) or by a
drop in power supply voltage.
Disconnect the power cable from the AC
wall outlet, wait about 30 seconds and then
plug it in again.
—
The batteries in the remote control
may have lost their charge.
Replace all batteries.
4
The protection circuitry has been
activated because of a short circuit,
etc.
Check that the speaker impedance settings
are correct.
10
This unit cannot be
turned off or does
not work properly.
The unit enters
standby mode.
Problem
Cause
Remedy
See
page
After display of a
countdown on the
front panel, the unit
goes into standby
mode.
If you do not use take any action,
the Auto Power Down function
operates.
Turn on the unit, and play the source again.
—
In the Setup menu “AutoPowerDown”
(“Func. Setup” → “AutoPowerDown”),
increase the time until switching to standby
mode, or turn off the Auto Power Down
function.
47
An internal error has occurred.
Please contact authorized Yamaha dealer or
service center to request repair.
—
10
“Internal Error” is
displayed on the
front panel display.
Sound/images
suddenly go off.
The protection circuitry has been
activated because of a short circuit,
etc.
Check that the speaker impedance settings
are correct.
10
12
Check that the speaker wires are not
touching each other, then turn the unit back
on.
—
The sleep timer has turned off the
unit.
Turn on the unit, and play the source again.
—
En
55
APPENDIX
Troubleshooting
Problem
No sound.
No picture.
Cause
Remedy
See
page
Incorrect input or output cable
connections.
Connect the cables properly. If the problem
persists, the cables may be defective.
16
If a DVI-HDMI cable is used to
connect the unit with an external
component, then it is necessary to
use an audio input jack for a
different input to output audio.
Display the HDMI Input Option menu for
the connected cable, select “Audio In,” and
select the jack to use for audio input.
38
Speaker connections are not
secure.
Secure the connections.
12
The HDMI components connected
to the unit do not support the
HDCP copy protection standards.
Connect HDMI components that support the
HDCP copy protection standards.
38
The audio input into the device is
set to playback through the TV.
In the Setup menu, set the HDMI Audio Out
(“Sound Setup” → “HDMI Audio Out”) to
other than “TV.”
45
No appropriate input source has
been selected.
Select an appropriate input source with
dInput selector (on the remote control).
25
The volume is turned down or
muted.
Turn up the volume.
—
Signals that this unit cannot
reproduce are being input from a
source component, such as a CDROM.
Use an input source that has signals that can
be reproduced on this unit.
—
A video jack (ex. Video input →
HDMI output) type different to the
input video is being used to try to
display content on the TV.
Use video jacks of the same type (ex. Video
input → Video output) to connect to the TV.
14
An appropriate video input is not
selected on the TV.
Select an appropriate video input on the TV.
—
Problem
No sound is output
from a specific
speaker.
Only the center
speaker outputs
substantial sound.
Cause
See
page
Remedy
The speaker is malfunctioning.
Check the Speaker indicators on
the front panel display. If the
corresponding indicator lights up,
connect another speaker and check
if sound is output.
If sound is not output, the unit may be
malfunctioning.
The playback component or
speakers are not connected
properly.
Connect the cables properly. If the problem
persists, the cables may be defective.
12, 16
Output from that speaker is
disabled.
Check the Speaker indicators on the front
panel display. If the corresponding indicator
is turned off, try the following.
1) Change to a different input source.
2) With the selected sound field program,
sound is not output from that speaker. Select
another sound field program.
3) “None” may have been selected for that
speaker on this unit. Display “Speaker
Setup” in the Setup menu, and set respective
parameters to enable output from that
speaker (“Speaker Setup” → “Config”).
7, 41
The volume of that speaker is set
to the minimum in “Speaker
Setup” in the Setup menu.
Display “Speaker Setup” in the Setup menu
and adjust the volume (“Speaker Setup” →
“Level”).
42
(If hardly any sound comes from
one channel)
Speaker output balance is not set
correctly.
Balance the volume of each speaker from
“Level” in the Setup menu (“Speaker Setup”
→ “Level”).
42
Sound may not be output from
certain channels, depending on the
input source or sound field
program.
Try another sound field program.
26
When a monaural source sound
field program is applied, for some
surround decoders, sound from all
channels is output from the center
speaker.
Try another sound field program.
26
En
7
56
APPENDIX
Troubleshooting
Problem
No sound is heard
from the surround
speakers.
No sound is heard
from the subwoofer.
Cause
Remedy
See
page
This unit is in straight decoding
mode and a monaural source is
being played back.
Press gSTRAIGHT (on the remote
control) to exit straight decoding mode.
27
Sound may not be output from
certain channels depending on
input sources or sound field
programs.
Try another sound field program.
26
A subwoofer is not connected, or it
is disabled.
Check that a subwoofer is connected
correctly, and from the Setup menu
“Subwoofer” (“Speaker Setup” → “Config”
→ “Subwoofer”), set the subwoofer to
“On.”
41
Turn the subwoofer power on.
If the subwoofer includes an Auto Power
Off function, then lower the Auto Power Off
sensitivity settings.
—
The subwoofer is turned off.
The source does not contain LFE
(☞p. 61) or low frequency signals.
Problem
Noise/hum noise is
heard.
The volume cannot
be increased, or the
sound is distorted.
—
Cause
See
page
Remedy
Incorrect cable connection.
Connect the audio cables properly.
If the problem persists, the cables may be
defective.
—
A DTS-CD is being played back.
If a DTS bitstream signal is not properly
input to this unit, only noise is output.
Connect the playback component to this
unit by digital connection and play back the
DTS-CD.
If the condition is not resolved, the problem
may result from the playback component.
Consult the manufacturer of the playback
component.
—
The component connected to the
output jacks of this unit is not
turned on.
When the component connected to the
output jacks of this unit is not turned on, the
sound may be distorted, or the volume may
decreased due to the nature of AV receivers.
Turn on all components connected to this
unit.
—
“Max Volume” is set to a low
value.
Set it to a higher value.
45
The right
combination of audio
/ video jacks to
connect cannot be
found.
Combine input connected to the
external component video output
with another input audio jack.
Select a desired input source (HDMI1-4 or
AV1-2) as a video input and select a audio
input source from “Audio In” in the Option
menu.
38
The audio input
sources cannot be
played in the desired
digital audio signal
format.
The connected component is not
set to output the desired digital
audio signals.
Set the playback component properly
referring to its instruction manual.
—
Problem
An error with the HDMI
connection has occurred.
Try re-inserting the HDMI cable.
—
This unit does not support
playback of HD Audio (TrueHD,
Dolby Digital plus, DTS Master
Audio, etc.) or DTS 96/24, etc.
Signals, such as HD Audio and DTS 96/24,
can be played by standard decoders (Dolby
Digital, DTS Digital Surround, etc.).
—
The front panel
display HDMI
indicator is flashing.
Confirm that HDMI video that is not
supported by the unit is not being input
(HDMI Input → Option menu → “Signal
Info”).
38
This unit is too close to other
digital or radio frequency
equipment.
Move this unit further away from such
equipment.
—
No picture or sound.
The number of components is over
the limit.
Disconnect some of the HDMI components.
—
The connected HDMI component
does not support high-bandwidth
digital copyright protection
(HDCP).
Connect an HDMI component that supports
HDCP.
—
There is noise
interference from
digital or radio
frequency
equipment.
HDMI™
Cause
See
page
Remedy
En
57
APPENDIX
Troubleshooting
Tuner (FM/AM)
FM
AM
Problem
FM stereo reception
is noisy.
Cause
You are too far from the station
transmitter, or the input from the
antenna is weak.
Remedy
See
page
Check the antenna connections.
21
Switch to monaural mode.
31
Replace the outdoor antenna with a more
sensitive multi-element antenna.
—
Adjust the antenna height or orientation, or
place it in a different location.
—
There is distortion,
and clear reception
cannot be obtained
even with a good FM
antenna.
There is multi-path interference.
The desired station
cannot be tuned into
with the automatic
tuning method.
You are in an area far from a
station, or input from the antenna
is weak.
Replace the outdoor antenna with a more
sensitive multi element antenna.
—
Use eTUNING H / I (on the remote
control) to manually select the station.
30
“No Presets” is
displayed.
No preset stations are registered.
Register stations you wish to listen to as
preset stations before operation.
31
“Wrong Station” is
displayed.
An invalid FM/AM frequency has
been input.
Input a frequency that can be received.
—
See
page
Problem
Cause
Remedy
The desired station
cannot be tuned into
with the automatic
tuning method.
The signal is weak, or the antenna
connections are loose.
Adjust the AM loop antenna orientation.
21
Use the manual tuning method.
30
Automatic station
preset does not
work.
Automatic station preset is not
available for AM stations.
Use manual station preset.
32
Continuous
crackling and
hissing noises are
heard.
The supplied AM loop antenna is
not connected.
Connect the AM loop antenna correctly
even if you use an outdoor antenna.
21
The noises may be caused by
lightning, fluorescent lamps,
motors, thermostats, or other
electrical equipment.
It is difficult to completely eliminate noise,
but it can be reduced by installing and
properly grounding an outdoor AM antenna.
21
Buzzing and whining
noises are heard.
A TV set is being used nearby.
Move this unit away from the TV set.
—
En
58
APPENDIX
Troubleshooting
Remote control
Problem
The remote control
does not work or
function properly.
External components
cannot be controlled
using the remote
control.
iPod™/iPhone™
Cause
Remedy
See
page
Wrong distance or angle.
The remote control will function within a
maximum range of 20 ft / 6 m, and no more
than 30 degrees off-axis from the front
panel.
—
Direct sunlight or lighting (from
an inverter type of fluorescent
lamp, strobe light, etc.) is striking
the remote control sensor of this
unit.
Adjust the lighting angle, or reposition this
unit.
—
The batteries are weak.
Replace all batteries.
4
The remote control ID of the
remote control and this unit do not
match.
Match the remote control ID of this unit and
the remote control.
54
The remote control code is not
correctly set.
Set the remote control code correctly using
“Remote control code search” on the CDROM.
—
Try setting another code for the same
manufacturer using “Remote control code
search” on the CD-ROM.
—
If this unit does not work when you press
—
Display
Loading...
Connect error
jCursor B / C / D / E (on the remote
control), do the following.
When the key does not work during DVD
disc menu operation: press the dInput
selector (on the remote control) again.
When the key does not work during Option
menu/Setup menu operation: press the key
corresponding to the current menu operation
again.
—
Even if the remote control code is correctly
set, there are some models that do not
respond to the remote control.
—
Cause
See
page
Remedy
The unit is in the process of
recognizing the connection with
your iPod/iPhone.
—
The unit is in the middle of
acquiring song lists from your
iPod/iPhone.
—
There is a problem with the signal
path from your iPod/iPhone to the
unit.
Turn off the unit and reconnect the Yamaha
iPod universal dock to the DOCK jack of
the unit.
33
Remove your iPod/iPhone from the Yamaha
iPod universal dock and then place it back in
the dock.
33
Connect an iPod/iPhone supported by the
unit.
—
Unknown iPod
The iPod/iPhone being used is not
supported by the unit.
iPod connected
Your iPod/iPhone is properly
placed in the Yamaha iPod
universal dock.
—
Disconnected
Your iPod/iPhone is removed from
the Yamaha iPod universal dock.
—
Unable to play
The unit cannot play back the
songs currently stored on your
iPod/iPhone.
Check that songs are currently stored on
your iPod/iPhone.
En
—
59
APPENDIX
Troubleshooting
Bluetooth™
Display
Searching...
Cause
Remedy
See
page
The Yamaha Bluetooth wireless
audio receiver and the Bluetooth
component are in the process of
pairing.
—
The Yamaha Bluetooth wireless
audio receiver and the Bluetooth
component are in the process of
establishing a connection.
—
Completed
The pairing is completed.
—
Canceled
The pairing is canceled.
—
BT connected
The connection between the
Yamaha Bluetooth wireless audio
receiver and the Bluetooth
component is established.
—
Disconnected
The Bluetooth component is
disconnected from the Yamaha
Bluetooth wireless audio receiver.
—
Not found
The Bluetooth component is not
found.
During pairing:
– pairing must be performed on the
Bluetooth component and this unit
simultaneously. Check if the Bluetooth
component is in pairing mode.
During connecting:
– check if the Bluetooth component is
turned on.
– check if the Bluetooth component is
within 32 feet (10 m) of the Yamaha
Bluetooth wireless audio receiver.
—
En
60
APPENDIX
Glossary
Audio information
Audio and video synchronization (lip sync)
Lip sync, an abbreviation for lip synchronization, is a technical term that
involves both a problem, and the capability of maintaining audio and video
signals synchronized during post-production and transmission.
Whereas the audio and video latency requires complex end-user
adjustment, HDMI version 1.3 incorporates an automatic audio and video
syncing capability that allows devices to perform this synchronization
automatically and accurately without user interaction.
Dolby Digital
Dolby Digital is a digital surround sound system that gives you completely
independent multi-channel audio. With 3 front channels (front L/R and
center), and 2 surround stereo channels, Dolby Digital provides 5 full-range
audio channels. With an additional channel especially for bass effects,
referred to as LFE (Low-Frequency Effect), the system has a total of 5.1channels (LFE is counted as 0.1 channel). By using 2-channel stereo for the
surround speakers, more accurate moving sound effects and surround sound
environments are possible than with Dolby Surround. The wide dynamic
range from maximum to minimum volumes that are reproduced by the 5
full-range channels, and the precise sound orientation generated using
digital sound processing provides listeners with unprecedented excitement
and realism. With this unit, any sound environment from monaural up to a
5.1-channel configuration can be freely selected for your enjoyment.
Dolby Pro Logic II
Dolby Pro Logic II is an improved technique used to decode vast numbers
of existing Dolby Surround sources. This new technology enables a discrete
5-channel playback with 2 front left and right channels, 1 center channel,
and 2 surround left and right channels, instead of only 1 surround channel
for conventional Pro Logic technology. There are three modes available:
“Music mode” for music sources, “Movie mode” for movie sources, and
“Game mode” for game sources.
Dolby Surround
PCM (Linear PCM)
Dolby Surround uses a 4-channel analog recording system to reproduce
realistic and dynamic sound effects: 2 front left and right channels (stereo),
a center channel for dialog (monaural), and a surround channel for special
sound effects (monaural). The surround channel reproduces sound within a
narrow frequency range. Dolby Surround is widely used with nearly all
video tapes and laser discs, as well as in many TV and cable broadcasts.
The Dolby Pro Logic decoder built into this unit employs a digital signal
processing system that automatically stabilizes the volume on each channel
to enhance moving sound effects and directionality.
Linear PCM is a signal format under which an analog audio signal is
digitized, recorded and transmitted without using any compression. This is
used as a method of recording CDs and DVD audio. The PCM system uses
a technique for sampling the size of the analog signal per very small unit of
time. Standing for “Pulse Code Modulation,” the analog signal is encoded
as pulses and then modulated for recording.
DTS Digital Surround
DTS Digital Surround was developed to replace the analog soundtracks of
movies with a 5.1-channel digital sound track, and is now rapidly gaining
popularity in movie theaters around the world. DTS, Inc. has developed a
home theater system so that you can enjoy the depth of sound and natural
spatial representation of DTS Digital Surround in your home. This system
produces practically distortion-free 5.1-channel sound (technically, left,
right and center channels, 2 surround channels, plus an LFE 0.1 channel as
a subwoofer, for a total of 5.1-channels).
Sampling frequency and number of quantized bits
When digitizing an analog audio signal, the number of times the signal is
sampled per second is called the sampling frequency, while the degree of
accuracy when converting the sound level into a numeric value is called the
number of quantized bits. The range of rates that can be played back is
determined based on the sampling rate, whereas the dynamic range
representing the sound level difference is determined by the number of
quantized bits. In principle, the higher the sampling frequency, the wider
the range of frequencies that can be played back, and the higher the number
of quantized bits, the more accurately the sound level can be reproduced.
Sound field program information
DSD
Direct Stream Digital (DSD) technology stores audio signals on digital
storage media, such as Super Audio CDs. Using DSD, signals are stored as
single bit values at a high-frequency sampling rate of 2.8224 MHz, while
noise shaping and oversampling are used to reduce distortion, a common
occurrence with very high quantization of audio signals. Due to the high
sampling rate, better audio quality can be achieved than that offered by the
PCM format used for normal audio CDs. The frequency is equal to or
higher than 100 kHz, with a dynamic range of 120 dB. This unit can
transmit or receive DSD signals via the HDMI jack.
LFE 0.1 channel
This channel reproduces low-frequency bass signals, and has a frequency
range from 20 Hz to 120 Hz. This channel is counted as 0.1, because it only
enforces a low-frequency range compared to the full-range reproduced by
the other 5 channels in Dolby Digital or DTS 5.1-channel systems.
CINEMA DSP
Since the Dolby Surround and DTS systems were originally designed for
use in movie theaters, their effect is best felt in a theater having many
speakers designed for acoustic effects. Since home conditions, such as
room size, wall material, number of speakers, and so on, can differ so
widely, it is inevitable that there are differences in the sound that is heard.
Based on a wealth of actually measured data, Yamaha CINEMA DSP uses
Yamaha’s original DSP technology to combine Dolby Pro Logic, Dolby
Digital, and DTS systems to provide the audiovisual experience of a movie
theater in the listening room of your own home.
Compressed music enhancer
The Compressed music enhancer feature of this unit enhances your
listening experience by regenerating the missing harmonics in compression
artifacts. As a result, it compensates for flattened complexity due to the loss
of high-frequency fidelity as well as lack of bass due to the loss of lowfrequency bass, providing improved performance for the overall sound
system.
En
61
APPENDIX
Glossary
SILENT CINEMA
HDMI
Yamaha has developed a natural, realistic sound effect DSP algorithm for
headphones. Parameters for headphones have been set for each sound field
program, so that accurate representations of all the sound field programs
can be enjoyed on headphones.
HDMI (High-Definition Multimedia Interface) is the first industry
supported, uncompressed, all-digital audio/video interface. Providing an
interface between any sources (such as set-top boxes or AV receivers) and
audio/video monitors (such as digital TV), HDMI supports standard,
enhanced or high-definition video as well as multichannel digital audio
using a single cable. HDMI transmits all ATSC HDTV standards and
supports 8-channel digital audio, with bandwidth to spare to accommodate
future enhancements and requirements.
When used in combination with HDCP (High-bandwidth Digital Content
Protection), HDMI provides a secure audio/video interface that meets the
security requirements of content providers and system operators. For
further information on HDMI, visit the HDMI website at “http://
www.hdmi.org/.”
Virtual CINEMA DSP
Yamaha has developed a Virtual CINEMA DSP algorithm that allows you
to enjoy DSP surround effects even without any surround speakers, by
using virtual surround speakers. It is even possible to enjoy Virtual
CINEMA DSP using a minimal two-speaker system that does not include a
center speaker.
Video information
“x.v.Color”
Component video signal
With the component video signal system, the video signal is separated into
the Y signal for luminance and the PB and PR signals for chrominance.
Color can be reproduced more faithfully with this system because each of
these signals is independent. The component signal is also called the “color
difference signal” because the luminance signal is subtracted from the color
signal. A monitor with component input jacks is required in order to output
component signals.
A color space standard supported by HDMI version 1.3. It is a more
extensive color space than sRGB, and allows the expression of colors that
were not hitherto possible. While remaining compatible with the color
gamut of sRGB standards, “x.v.Color” expands the color space, and can
thus produce more vivid, natural images. It is particularly effective for still
pictures and computer graphics.
Composite video signal
With the composite video signal system, the video signal comprises the
three basic elements of a video picture: color, brightness and
synchronization data. A composite video jack on a video component
transmits these three elements combined.
Deep Color
Deep Color refers to the use of various color depths in displays, up from the
24-bit depths in previous versions of the HDMI specification. This extra bit
depth allows HDTVs and other displays increase from millions of colors to
billions of colors and eliminate on-screen color banding for smooth tonal
transitions and subtle gradations between colors. The increased contrast
ratio can represent many times more shades of gray between black and
white. Additionally, Deep Color increases the number of available colors
within the boundaries defined by the RGB or YCbCr color space.
En
62
APPENDIX
Information on HDMI™
■ HDMI signal compatibility
NOTES
Audio signals
Audio signal types
Audio signal formats
Compatible media
2ch Linear PCM
2ch, 32-192 kHz, 16/20/24 bit
CD, DVD-Video, DVD-Audio, etc.
Multi-ch Linear PCM
8ch, 32-192 kHz, 16/20/24 bit
DVD-Audio, Blu-ray Disc, HD DVD,
etc.
DSD
2/5.1ch, 2.8224 MHz, 1 bit
SACD, etc.
Bitstream
Dolby Digital, DTS
DVD-Video, etc.
• If the input source component can decode the bitstream audio signals of audio commentaries, you can play back the audio
sources with the audio commentaries mixed down by using the digital audio input (optical or coaxial) connections.
• Refer to the supplied instruction manuals of the input source component, and set the component appropriately.
• When CPPM copy-protected DVD-Audio is played back, video and audio signals may not be output,
depending on the type of the DVD player.
• This unit is not compatible with HDCP-incompatible HDMI or DVI components.
• Refer to the supplied instruction manuals for details.
To decode audio bitstream signals on this unit, set the input source component appropriately so that the
component outputs the bitstream audio signals directly (does not decode the bitstream signals on the
component).
• This unit is not compatible with the audio commentary features (for example, the special audio contents
downloaded via Internet) of Blu-ray Disc or HD DVD. This unit does not play back the audio
commentaries of the Blu-ray Disc or HD DVD content.
Video signals
This unit is compatible with the video signals of the following resolutions:
–
–
–
–
480i/60 Hz
576i/50 Hz
480p/60 Hz
576p/50 Hz
– 720p/60 Hz, 50 Hz
– 1080i/60 Hz, 50 Hz
– 1080p/60 Hz, 50 Hz, 24 Hz
About trademarks
Bluetooth™
Bluetooth is a registered trademark of the Bluetooth SIG and is used by Yamaha in accordance with a
license agreement.
Manufactured under license from Dolby Laboratories.
“Dolby,” “Pro Logic,” and the double-D symbol are trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;
6,487,535 & other U.S. and worldwide patents issued & pending. DTS and DTS Digital Surround are
registered trademarks and the DTS logos and Symbol are trademarks of DTS, Inc. ©1996-2008 DTS,
Inc. All Rights Reserved.
“HDMI,” the “HDMI” logo and “High-Definition Multimedia Interface” are trademarks, or registered
trademarks of HDMI Licensing LLC.
“SILENT CINEMA” is a trademark of Yamaha Corporation.
iPod™, iPhone™
“iPod” is a trademark of Apple Inc., registered in the U.S. and other countries. “iPhone” is a trademark
of Apple Inc.
En
63
APPENDIX
Specifications
■ HDMI specification
• Deep Color
• x.v.Color
• Auto Lip sync
■ INPUT/OUTPUT
Input jacks
• HDMI input x 4
• AV input x 5
[Audio] Digital input (optical) x 2, digital input (coaxial) x 2,
analog input x 1
[Video] Component video jacks x 2, video jacks x 3
• AUDIO input x 2
[Audio] Analog jack x 2
• VIDEO AUX input x 1
[Audio] Analog x 1, stereo mini jack x 1
[Video] Video jack x 1
• DOCK input x 1
Output jacks
• TV output (monitor output) x 3
[Audio/Video] HDMI x 1
[Video] Component video jack x 1, video jack x 1
• AV output x 2
[Audio] Analog jack x 1
[Video] Video jack x 1
• Minimum RMS Output Power for Front, Center, Surround
[U.S.A. and Canada models]
(1 kHz, 0.9% THD, 8 Ω)
FRONT L/R........................................................................100 W/ch
CENTER .................................................................................100 W
SURROUND L/R...............................................................100 W/ch
[Other models]
(1 kHz, 0.9% THD, 6 Ω)
FRONT L/R........................................................................100 W/ch
CENTER .................................................................................100 W
SURROUND L/R...............................................................100 W/ch
• Dynamic Power (IHF)
[U.S.A. and Canada models]
Front Speakers 8/6/4/2 Ω .................................. 110/130/160/180 W
[Other models]
Front Speakers 6/4/2 Ω ............................................ 105/130/150 W
• Maximum Useful Output Power (JEITA)
[China, Korea, General and Asia models]
1 kHz, 10% THD, 6 Ω ............................................................135 W
• Maximum Output Power [U.K., Europe and Asia models]
1 kHz, 0.7% THD, 4 Ω ...........................................................120 W
• IEC Output Power [U.K., Europe and Asia models]
Front Speakers 1 kHz, 0.9% THD, 8 Ω .........................95 W+95 W
• Dynamic Headroom [U.S.A. and Canada models]
8 Ω.........................................................................................0.23 dB
• Input Sensitivity/Input Impedance
AV5, etc..................................................................... 200 mV/47 kΩ
• Maximum Input Voltage
AV5, etc. (1 kHz, 0.5% THD) .....................................2.3 V or more
• AUDIO output x 1
[Audio] Analog jack x 1
• Rated Output Voltage/Output Impedance
AUDIO OUT............................................................ 200 mV/1.2 kΩ
SUBWOOFER (2ch Stereo & Front: Small) ............... 1.0 V/1.2 kΩ
■ AUDIO SECTION
• Headphone Jack Rated Output/Impedance
AV5, etc. (1 kHz, 50 mV, 8 Ω) .................................. 100 mV/470 Ω
• Surround Decoder
Dolby Digital, Dolby Pro Logic, Dolby Pro Logic II
DTS Digital Surround
DSD
• Frequency Response
AV5 to FRONT ..................................... 10 Hz to 100 kHz, +0/-3 dB
• Total Harmonic Distortion
AV5, etc. to FRONT
[U.S.A. and Canada models] (1 kHz, 50 W, 8 Ω)........ 0.06% or less
[Other models] (1 kHz, 50 W, 6 Ω) ............................. 0.06% or less
• Signal to Noise Ratio (IHF-A Network)
AV5, etc. Input Shorted (250 mV to Front Speakers)
................................................................................. 98 dB or more
• Residual Noise (IHF-A Network)
Front Speakers ........................................................... 150 µV or less
• Channel Separation (1 kHz/10 kHz)
AV5, etc. (5.1 kΩ shortened) ...........................60 dB/45 dB or more
• Volume Control ...................................... MUTE / -80 dB to +16.5 dB
• Tone Control (Front Speakers)
BASS Boost/Cut ............................................ ±10 dB/2 dB at 50 Hz
BASS Turnover Frequency .................................................... 350 Hz
TREBLE Boost/Cut ..................................... ±10 dB/2 dB at 20 kHz
TREBLE Turnover Frequency.............................................. 3.5 kHz
• Filter Characteristics (fc=40/60/80/90/100/110/120/160/200 Hz)
H.P.F. (Front, Center, Surround) ....................................... 12 dB/oct.
L.P.F. (Subwoofer) ............................................................ 24 dB/oct.
■ VIDEO SECTION
• Video Signal Type
[U.S.A., Canada, Korea and General models] ........................ NTSC
[Other models] ............................................................................PAL
• Signal Level
Composite ..................................................................... 1 Vp-p/75 Ω
Component.......................1 Vp-p/75 Ω (Y), 0.7 Vp-p/75 Ω (PB/PR)
• Maximum Input Level (Video Conversion Off) ....... 1.5 Vp-p or more
• Signal to Noise Ratio.................................................... 50 dB or more
• Frequency Response [MONITOR OUT]
Component (Video Conversion Off)............5 Hz to 60 MHz, ±3 dB
En
64
APPENDIX
■ FM SECTION
■ AM SECTION
• Tuning Range
[U.S.A. and Canada models] ...............................87.5 to 107.9 MHz
[Asia and General models] ........... 87.5/87.50 to 108.0/108.00 MHz
[Other models].................................................87.50 to 108.00 MHz
• Tuning Range
[U.S.A. and Canada models]...................................530 to 1710 kHz
[Asia and General models]..................... 530/531 to 1710/1611 kHz
[Other models] ........................................................531 to 1611 kHz
• 50 dB Quieting Sensitivity (IHF)
Mono..................................................................... 3.0 µV (20.8 dBf)
■ GENERAL
• Signal to Noise Ratio (IHF)
Mono/Stereo ................................................................. 74 dB/69 dB
• Harmonic Distortion (1 kHz)
Mono/Stereo ....................................................................... 0.3/0.3%
• Antenna Input (unbalanced) .........................................................75 Ω
• Power Supply
[U.S.A. and Canada models].................................. AC 120 V, 60 Hz
[General models]......................... AC 110-120/220-240 V, 50/60 Hz
[China model].........................................................AC 220 V, 50 Hz
[Korea model] ........................................................ AC 220 V, 60 Hz
[Australia model] ................................................... AC 240 V, 50 Hz
[U.K. and Europe models] ..................................... AC 230 V, 50 Hz
[Asia models] ............................................ AC 220-240 V, 50/60 Hz
• Power Consumption
[U.S.A. and Canada models] .....................................250 W/320 VA
[Other models] ........................................................................ 250 W
• Standby Power Consumption
[General models] ..........................................................1.0 W or less
[Other models] ..............................................................0.5 W or less
• Dimensions (W x H x D)
435 x 151 x 315 mm (17-1/8 x 6 x 12-3/8 in)
• Weight
7.5 kg (16.5 lbs)
* Specifications are subject to change without notice.
Index
A
I
Advanced Setup menu ................................................................. 53
AM tuning.................................................................................... 30
Antenna connection ..................................................................... 21
iPod™/iPhone™ playback .......................................................... 33
B
Bluetooth™ component playback................................................ 35
C
Cable plug .................................................................................... 13
Connections.................................................................................... 9
E
Supplied accessories...................................................................... 4
J
Jack.............................................................................................. 13
O
Option menu................................................................................ 37
R
Rear panel...................................................................................... 6
Remote control, Controlling other components .......................... 50
Remote control, Part names and functions.................................... 8
External device connection .......................................................... 13
S
F
FM tuning..................................................................................... 30
Front panel ..................................................................................... 5
Front panel display......................................................................... 7
SCENE function.......................................................................... 26
Setup menu.................................................................................. 40
Sound field program.................................................................... 26
Sound field program parameter setting ....................................... 48
Speaker connection ....................................................................... 9
Speaker setting ............................................................................ 22
En
65
© 2010 Yamaha Corporation All rights reserved.
YC435B0/OMEN1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising