Landa PDE2-1500 Operator's Manual
Landa PDE2-1100 is a pressure washer designed for heavy-duty cleaning tasks. With its powerful pump, it delivers high-pressure water, making it ideal for removing dirt, grime, mold, and other stubborn stains from various surfaces. It comes equipped with multiple nozzles for different cleaning applications, including a soap nozzle for applying detergent. The unloader safety feature automatically relieves pressure when the spray gun is released, preventing damage to the pump.
Advertisement
Advertisement
PDE
OPERATOR’S MANUAL
■ PDE2-1100 ■ PDE2-1500 ■ PDE4-2000 ■ PDE4-3000
LISTED
®
For technical assistance or the dealer nearest you, consult our web page at www.landa.com
8.913-997.0
Important Safety Information ................................................................ 4-5
Component Identifi cation ......................................................................... 6
Assembly Instructions .............................................................................. 7
Operating Instructions.............................................................................. 8
Applying Detergent and General Operating Techniques .......................... 9
Shut Down and Clean-Up ...................................................................... 10
Storage .................................................................................................. 10
Troubleshooting ..................................................................................... 11
Preventative Maintenance ..................................................................... 12
Oil Change Record ................................................................................ 12
2-11024D, 2-15024D, 4-20024A Exploded View.................................... 13
2-11024D, 2-15024D, 4-20024A Exploded View Parts List............... 14-15
4-30025A, B, C Exploded View and Parts List .................................. 16-18
Specifi cations ......................................................................................... 19
LE Series Pump Exploded View and Parts List ................................ 20-21
RKA E Version Pump Exploded View and Parts List ........................ 22-23
UU1 Unloader Exploded View and Parts List ........................................ 24
AR-20242B Unloader Exploded View and Parts List ............................. 25
Hose and Spray Gun Assembly ............................................................. 26
Warranty
CONTENTS
Model Number ______________________________
Serial Number ______________________________
Date of Purchase ____________________________
The model and serial numbers will be found on a decal attached to the pressure washer. You should record both serial number and date of purchase and keep in a safe place for future reference.
LANDA PDE • 8.913-997.0 • Rev. 02/12
3
INTRODUCTION & IMPORTANT SAFETY INFORMATION
4
Thank you for purchasing this Pressure Washer.
We reserve the right to make changes at any time without incurring any obligation.
Owner/User Responsibility:
DANGER: Improper connection of the equipmentgrounding conductor can result in a risk of electrocution. Check with a qualified electrician or service personnel if you are in doubt as to whether the outlet is properly grounded. Do not modify the
The owner and/or user must have an understanding of the manufacturer’s operating instructions and warnings before using this pressure washer. Warning information should be emphasized and understood. If the operator is not fl uent in English, the manufacturer’s instructions and warnings shall be read to and discussed with the operator in the operator’s native language by the purchaser/owner, making sure that the operator comprehends its contents.
plug provided with the product - if it will not fi t the outlet, have a proper outlet installed by a qualifi ed electrician. Do not use any type of adaptor with this product
WARNING
WARNING: Keep wand, hose, and water spray away from electric wiring or fatal electric shock may result.
Owner and/or user must study and maintain for future reference the manufacturers’ instructions.
The operator must know how to stop the machine quickly and understand the operation of all controls.
Never permit anyone to operate the engine without proper instructions.
5. To protect the operator from electrical shock, the machine
KEEP WATER
SPRAY AWAY FROM
ELECTRICAL WIRING.
must be electrically grounded.
It is the responsibility of the owner to connect this machine to a UL grounded receptacle of proper voltage and
This manual should be considered a permanent part of the machine and should remain with it if
amperage ratings. Do not spray water on or near electrical components. Do not touch machine with wet hands or while standing in water. Always disconnect power before servicing.
machine is resold.
When ordering parts, please specify model and serial number. Use only identical replacement parts.
IMPORTANT SAFETY
INFORMATION
WARNING
WARNING: Flammable liquids can create fumes which can ignite, causing property damage
This machine is to be used only by trained operators.
or severe injury.
WARNING: Risk of explosion —
WARNING: To reduce the risk of injury, read operating instructions carefully before using.
1. Read the owner's manual thoroughly. Failure to follow instructions could cause malfunction of the machine and
READ OPERATOR’S
MANUAL THOROUGHLY
PRIOR TO USE.
result in death, serious bodily injury and/or property damage.
2. Know how to stop the machine and bleed pressure quickly. Be thoroughly familiar with the controls.
Do not spray fl ammable liquids.
RISK OF EXPLOSION:
DO NOT SPRAY
FLAMMABLE LIQ-
UIDS.
6. Do not allow acids, caustic or abrasive fluids to pass through the pump.
7. Never run pump dry or leave spray gun closed longer than 1-2 minutes.
8. Keep operating area clear of all persons.
WARNING
3. Stay alert — watch what you are doing.
USE PROTECTIVE
EYE WEAR
AND CLOTHING
WHEN OPERATING
THIS EQUIPMENT.
4. All installations must comply with local codes. Contact your electrician, plumber, utility company or the selling distributor for specifi c details. If your machine is rated 250 volts or less, single phase will be provided with a ground fault circuit interrupter (GFCI).
If rated more than 250 volts, or more than single phase this product should only be connected to a power supply receptacle protected by a GFCI.
LANDA PDE • 8.913-997.0 • Rev. 02/12
WARNING: High pressure spray can cause paint chips or other particles to become airborne and fl y at high speeds. To avoid personal injury, eye, hand and foot safety devices must be worn.
9. Eye, hand, and foot protection must be worn when u s i n g t h i s e q u i p m e n t .
IMPORTANT SAFETY INFORMATION
WARNING
TRIGGER GUN KICKS
BACK - HOLD WITH
BOTH HANDS
WARNING: Grip cleaning wand securely with both hands before starting. Failure to do this could result in injury from a whipping wand.
WARNING
RISK OF INJECTION
OR SEVERE INJURY
TO PERSONS. KEEP
CLEAR OF NOZZLE.
WARNING: High pressure developed by these machines will cause personal injury or equipment damage. Keep clear of nozzle. Use caution when operating. Do not direct discharge stream at people, or severe injury or death will result.
10. To reduce the risk of injury, close supervision is necessary when a machine is used near children.
Do not allow children to operate the pressure washer. This machine must be attended during
operation.
11. Never make adjustments on machine while in operation.
12. Be certain all quick coupler fi ttings are secured before using pressure washer.
WARNING
WARNING: Protect machine from freezing.
13. To keep machine in best operating conditions, it is important you protect machine from freezing. Failure to protect
PROTECT FROM
FREEZING
machine from freezing could cause malfunction of the machine and result in death, serious bodily injury, and/or property damage. Follow storage instructions specifi ed in this manual.
14. Inlet water must be clean fresh water and no hotter then 90°F.
15. Manufacturer will not be liable for any changes made to our standard machines or any components not purchased from us.
16. The best insurance against an accident is precaution and knowledge of the machine.
WARNING
RISK OF INJURY
FROM FALLS WHEN
USING LADDER.
WARNING: Be extremely careful when using a ladder, scaffolding or any other relatively unstable location. The cleaning area should have adequate slopes and drainage to reduce the possibility of a fall due to slippery surfaces.
17. Do not overreach or stand on unstable support.
Keep good footing and balance at all times.
18. Do not operate this machine when fatigued or under the infl uence of alcohol, prescription medications, or drugs.
19. Follow the maintenance instructions specifi ed in the manual.
5
LANDA PDE • 8.913-997.0 • Rev. 02/12
6
Water Supply
(not included)
COMPONENT IDENTIFICATION
Pressure
Nozzle
Quick
Coupler
On/Off
Switch
Pump
Protector
Unloader
Soap
Nozzle
Wand
Hanger
Pump
Safety
Latch
Detergent
Bucket (not included)
Garden Hose
(not included)
GFCI
High Pressure
Hose
Spray Gun and Wand
Pump — Develops high pressure.
Spray Gun — Controls the application of water and detergent onto cleaning surface with trigger device.
Includes safety latch.
Wand — Must be connected to the spray gun.
Unloader — Safety device that relieves pressure when spray gun trigger is closed.
High Pressure Hose — Connect one end to water pump discharge nipple and the other end to spray gun.
Pump Protector — Cycles fresh cool water through pump when recirculating water reaches 140°F.
GFCI — Ground fault circuit interrupter trips when voltage leaks to ground.
Note: If trigger on spray gun is released for more
than 1-2 minutes, water will leak from valve. Warm water will discharge from pump protector onto fl oor. This system prevents internal pump damage.
LANDA PDE • 8.913-997.0 • Rev. 02/12
Handle
Alignment
Holes
ASSEMBLY INSTRUCTIONS
Carriage
Bolt
Nut
Bolts
Hose/Gun
Storage
Bracket
Nut
Frame
Assy.
STEP 1: Attach the handle to the frame of the pressure washer.
Note: It may be necessary to move the handle supports from side to side in order to align the handle so it will slide over the frame supports.
Spray
Gun
Safety
Latch
STEP 2: Insert the carriage bolt through the holes from the outside of the unit and attach a nut from the inside of the machine. Tighten nuts.
Spray
Gun/Wand
Nozzle Extension
High Pressure
Hose
Studs
STEP 3: Attach the spray gun/hose storage handle, and bracket to handle. Tighten nuts.
STEP 4: Attach the high pressure hose to the spray gun using tefl on tape on hose threads.
STEP 5: Attach nozzle extension to spray gun/wand. Tighten both by hand.
Discharge
Nipple
STEP 6: Before installing nozzle, turn on water supply and run machine allowing water to flush through the system until clear.
Cold
Water
Source
High
Pressure
Hose
Coupler Collar
STEP 7: Connect the high pressure hose to the pumps discharge nipple. Push coupler collar forward until secure.
Pressure
Nozzle
Wand
Coupler
Pump
Water
Garden Hose
Garden
Hose
STEP 8: Connect the garden hose to pump water inlet. Inspect inlets.
CAUTION: Do not run the pump without water or pump damage will result.
STEP 9: Connect garden hose to the cold water source.
Wand
Collar
STEP 10: Pull the spring-loaded collar of the wand coupler back to insert your choice of pressure nozzle.
LANDA PDE • 8.913-997.0 • Rev. 02/12
7
8
OPERATING INSTRUCTIONS
Cold
Water
Source
Garden
Hose
STEP 1: Connect garden hose to the cold water source and turn water on completely. Never use hot water.
STEP 2: Trigger the spray gun to eliminate trapped air then wait for a steady fl ow of water to emerge from the spray wand. Then install nozzle
On/Off
Switch
STEP 4: Connect to appropriate power supply. Push reset button on GFCI.
Safety
Latch
STEP 4: Turn machine on by turning switch at top of motor.
WARNING! Never replace
nozzles without engaging the safety latch on the spray gun trigger.
NOZZLES
The fi ve color-coded quick connect nozzles provide a wide array of spray widths from 0° to 40° and are easily accessible when placed in the convenient rubber nozzle holder, which is provided on the front of the machine.
NOTE: For a more gentle rinse, select the white 40° or green 25° nozzle.
To scour the surface, select the yellow 15° or red 0° nozzle. To apply detergent select the black nozzle.
LANDA PDE • 8.913-997.0 • Rev. 02/12
DETERGENTS AND GENERAL OPERATING TECHNIQUES
WARNING
WARNING: Some detergents may be harmful if inhaled or ingested, causing severe nausea, fainting or poisoning. The harmful elements may cause property damage or severe injury.
STEP 1: Connect detergent injector to discharge nipple on machine. Connect high pressure hose to injector with quick coupler. (Check to make sure locking coupler sleeves are in proper position before applying water pressure).
Filter
Discharge
Nipple
Detergent
Injector
Quick
Coupler
STEP 2: Use detergent designed specifi cally for pressure washers.
Household detergents could damage the pump. Prepare detergent solution as required by the manufacturer. Fill a container with pressure washer detergent. Place the fi lter end of detergent suction tube into the detergent container.
STEP 3: With safety latch on spray gun engaged, secure black detergent nozzle into quick coupler. NOTE: Detergent cannot be applied using a pressure nozzle.
STEP 4: With the motor running, pull trigger to operate machine.
Liquid detergent is drawn into the machine and mixed with water. Apply detergent to work area. Do not allow detergent to dry on surface.
IMPORTANT: You must fl ush the detergent injection system after each use by placing the suction tube into a bucket of clean water, then run the pressure washer in low pressure for 1-2 minutes.
THERMAL PUMP PROTECTION
If you run the motor on your pressure washer for 1-2 minutes without pressing the trigger on the spray gun, circulating water in the pump can reach high temperatures. When the water reaches this temperature, the pump protector engages and cools the pump by discharging the warm water onto the ground. This thermal device prevents internal damage to the pump.
CLEANING TIPS
Pre-rinse cleaning surface with fresh water. Place detergent suction tube directly into cleaning solution and apply to surface at low pressure (for best results, limit your work area to sections approximately 6 feet square and always apply detergent from bottom to top). Allow detergent to remain on surface 1-3 minutes. Do not allow detergent to dry on surface. If surface appears to be drying, simply wet down surface with fresh water.
If needed, use brush to remove stubborn dirt. Rinse at high pressure from top to bottom in an even sweeping motion keeping the spray nozzle approximately 1 foot from cleaning surface. Use overlapping strokes as you clean and rinse any surface. For best surface cleaning action spray at a slight angle.
Recommendations:
• Before cleaning any surface, an inconspicuous area should be cleaned to test spray pattern and distance for maximum cleaning results.
• If painted surfaces are peeling or chipping, use extreme caution as pressure washer may remove the loose paint from the surface.
• Keep the spray nozzle a safe distance from the surface you plan to clean. High pressure wash a small area, then check the surface for damage. If no damage is found, continue to pressure washing.
CAUTION - Never use:
• Liquids containing solvents (i.e., paint thinners, gasoline, oils)
• Tri-sodium phosphate products
• Ammonia products
• Acid-based products
These chemicals will harm the machine and will damage the surface being cleaned.
RINSING
It will take a few seconds for the detergent to clear.
Apply safety latch to spray gun. Remove black soap nozzle from the quick coupler. Select and install the desired high pressure nozzle. NOTE: You can also stop detergent from fl owing by simply removing detergent siphon tube from bottle.
9
LANDA PDE • 8.913-997.0 • Rev. 02/12
SHUTTING DOWN AND CLEAN-UP
On/Off
Switch
STEP 1: Remove detergent suction tube from container and insert into one gallon of fresh water.
Slide nozzle forward for low pressure or use black detergent nozzle. Pull trigger on spray gun and siphon fresh clean water for one minute.
STEP 2: Turn off machine by turning switch to “OFF” switch.
STEP 3: Turn off water supply.
STEP 4: Press trigger to release water pressure.
High
Pressure
Outlet
Pump
Water
Inlet
STEP 5: Disconnect the garden hose from the water inlet on the machine.
Safety
Latch
STEP 6: Disconnect the high pressure hose from the discharge nipple.
STEP 7: Engage the spray gun safety lock.
10
STORAGE
Pump Storage
CAUTION
CAUTION: Always store your pressure washer in a location where the temperature will not fall below 32°F
(0°C). The pump in this machine is susceptible to permanent damage if frozen.
FREEZE DAMAGE IS NOT COVERED B Y W A R -
RANTY.
If you must store your pressure washer in a location where the temperature is below 32°F, you can minimize the chance of damage to your machine by draining your machine as follows:
1. Stop the pressure washer and detach supply hose and high pressure hose. Squeeze trigger of spray gun to drain all water from the wand and hose.
2. Restart pressure washer and let it run briefl y (about
5 seconds) until water no longer discharges from the high pressure outlet.
LANDA PDE • 8.913-997.0 • Rev. 02/12
TROUBLESHOOTING
PROBLEM
PUMP RUNNING
NORMALLY BUT
PRESSURE LOW ON
INSTALLATION
POSSIBLE CAUSE
Pump sucking air
Check valves sticking
Unloader valve seat faulty
Faulty or misadjusted unloader valve
SOLUTION
Check water supply and possibility of air seepage.
Check and clean or replace if necessary.
Check and replace if necessary.
Tampering with the factory setting may cause personal injury and/ or property damage, and will void the manufacture warranty.
Check and replace if necessary.
FLUCTUATING
PRESSURE
Nozzle incorrectly sized
Worn piston packing
Valves worn
Blockage in valve
Pump sucking air
PRESSURE LOW AFTER
PERIOD OF NORMAL
USE
Worn piston packing
Insuffi cient water
Nozzle worn
Suction or delivery valves worn
Suction or delivery lines blocked
Check and replace if necessary.
Check and replace if necessary.
Check and replace if necessary.
Check water supply connections.
Check and replace if necessary.
Check fi lter and hose for breakage.
Check and replace if necessary.
Check and replace if necessary.
Check and clean if necessary.
PUMP NOISY
Unloader valve seat worn
Worn piston packing
Water temperature excessive
Air in suction line
Check and replace if necessary.
Check and replace if necessary.
Reduce to below 160 o
F.
Check water supply and connections on suction line.
Broken or weak suction or delivery valve spring
Foreign matter in valves
Worn bearings
Check and replace if necessary.
Check and clean if necessary.
PRESENCE OF WATER
IN PUMP OIL
Excessive temperature of water
Oil seal worn
High humidity in air
Check and replace if necessary.
Reduce to below 160 o
F.
Check and replace if necessary.
Check and replace if necessary.
Piston packing worn Check and replace if necessary.
WATER DRIPPING FROM
UNDER PUMP
Piston packing worn
O-ring plunger retainer worn
Check and replace if necessary.
Check and replace if necessary.
WATER DRIPPING FROM
PUMP PROTECTOR
Water supply pressure too high (over
90 PSI)
Spray gun is in the off position for over
5 minutes
Lower water supply pressure using a regulator.
Turn machine off if not in use for over 1-2 minutes.
OIL DRIPPING
Oil seal worn
EXCESSIVE VIBRATION
IN HIGH PRESSURE
HOSE
MOTOR DOES NOT
START WHEN SWITCHED
ON
Irregular functioning of the pump valves
Plug not well connected or lack of power supply
WHEN SWITCHING ON
THE MACHINE, MOTOR
HUMS BUT DOES NOT
RUN
Main voltage is insuffi cient, lower than the minimum required
The pump is stuck or frozen
Check and replace if necessary.
Check and replace if necessary.
Check plug, cable and switch.
Check to make sure main power supply is adequate.
Check by turning the motor manually.
LANDA PDE • 8.913-997.0 • Rev. 02/12
11
PREVENTATIVE MAINTENANCE
PREVENTATIVE MAINTENANCE
This pressure washer was produced with the best available materials and quality craftsmanship. However, you as the owner have certain responsibilities for the correct care of the equipment. Attention to regular preventative maintenance procedures will assist in preserving the performance of your equipment. Contact your dealer for maintenance. Regular preventative maintenance will add many hours to the life of your pressure washer.
Perform maintenance more often under severe conditions.
Pump Oil
Inspect
Change
Replace High Pressure Nozzle
Replace Quick Connects
Clean Water Screen/Filter
Replace HP Hose
Grease Motor
MAINTENANCE SCHEDULE
Daily inspect the oil level
After fi rst 50 hours, then every 500 hours or annually
Every 6 months
Annually
Weekly
Annually if there is any sign of wear
Every 10,000 hours
OIL CHANGE RECORD
Check pump oil and engine oil level before fi rst use of your new pressure washer.
Date Oil Changed
Month/Day/Year
Estimated Operating
Hours Since Last
Oil Change
Date Oil Changed
Month/Day/Year
Estimated Operating
Hours Since Last
Oil Change
12
LANDA PDE • 8.913-997.0 • Rev. 02/12
2-11024D, 2-15024D, 4-20024A EXPLODED VIEW
2
3
1
9
45
55
4
67
15
5
18
68
2-15024D
2-11024D
2-15025D
5
6, 7
57
12
OFF ON
MOT
OR OVERLOAD
DEP OSIT
PUS
IVO D
H T
E RE
O RES
PO
ET
SIC ION
47 16
17
27
14
13
19
49
56
39
21
20
64
15
12
13 14
17
OFF ON
10
60, 11
25
26
24
22
34
35
MOT
DEP
PUSH OR OVER
DE OSIT IVO
TO RESET
REP
LO
ION OSIC
AD
23
16
61, 62
11, 60
10
(Model 4-20024A)
34
35
29
1
28
30
8
31
32
33
8
35
34
15
2-11024D
58
48
51
52
50
36
36
50
54
53
INTENDED FOR INDOOR USE
61
61
65
26
48
43
44
47
44
43
67
43
37
38
42
41
40
46
45
39
LANDA PDE • 8.913-997.0 • Rev. 02/12
13
14
2-11024D, 2-15024D, 4-20024A EXPLODED VIEW PARTS LIST
ITEM PART NO. DESCRIPTION QTY
1
Model 2-15024D
9.104-016.0 NOZZLE KIT 3.25 (23326) 1
Model
9.804-626.0 Nozzle, 700375, White 1
9.804-624.0 Nozzle, Yellow 1
9.804-625.0 Nozzle, 250375, Green 1
9.804-627.0 Nozzle, 000375, Red 1
Model
8.712-354.0 Nozzle, Yellow
8.712-355.0 Nozzle, 2505, Green
8.712-356.0 Nozzle, White
8.712-353.0 Nozzle, 0005, Red
2
8.712-398.0
9.802-220.0
Nozzle, Compl. QCME 6540,
1
Wand, 18" M22 x 1/4" QC 1
1
1
1
1
3
4
5
9.802-223.0 Spray Gun, SK@, 3/8" Inlet,
Lance w/M22 Coupler
Hose, See Specifi cations Page
1
6
9.802-517.0
9.802-427.0
Connector, 1/2" L/T, 90°,
2
Cord, Service, SOWA 12/3,
Coleman 21"
7
8
9.802-448.0
9.802-773.0
9 9.802-225.0
10 9.803-831.0
11 9.802-759.0
12 9.802-450.0
13 9.802-478.0
14 9.802-477.0
15 9.802-430.0
9.802-431.0
9.802-432.0
16 9.800-016.0
17 9.803-833.0
Conduit, Watertight, Flex,
Nut, 1/4" ESNA, NC
4-20024A)
8"
6
Inj., Chem, Assy, 3-5 GPM 1
Connector, 3/4" L/T, 90°, Black
(4-20024A) 2
Screw, 10/32" x 1/2" BHSOC
Black (2-15024D, 4-20024A) 4
Switch, 2 Pos. 120V-600V,
1-3 PH Bremas (2-15024D,
4-20024A) 1
Lid, Plastic, Carlon E9801
Box (2-15024D, 4-20024A) 1
Box, Plastic, Carlon E9801, w/o Lid (2-15024D,4-20024A)1
GFCI, 240V 1Ph 30A, 36' 10-3
1
GFCI, 120V 20A, w/36' 12-3
GFCI, 120V 15A, w/36'
12-3 Cord (2-11024D)
1
1
Label, Disconnect Power
Supply 1
Cover, Motor (2-15024D,
1
ITEM PART DESCRIPTION
18 9.802-171.0 Nipple, 3/8" x 3/8" NPT ST
Male
QTY
1
19 9.802-146.0 Swivel, 1/2" MP x 3/4" GHF, w/Strainer 1
20 9.804-025.0 Protector, Pump 1/4" PTP 1
21 Unloader, See Specifi cations Page
22 Pump, See Specifi cations Page
23 9.802-720.0 Bolt, 3/8" x 1" NC
24 9.802-807.0
25 8.718-618.0
26 8.718-980.0
Washer, 3/8" SAE, Flat
Bolt, 5/16" x 3/4" NC
Washer, 5/16" Flat
27 Motor, See Specifi cations Page
28 9.802-064.0 Grommet, Rubber, Nozzle
Holder 5
29 9.802-788.0
30 8.920-262.0
Nut, 5/16" Whiz Loc Flange 2
Handle, Grab, Chrome 1
4
4
4
8
31
32
8.900-319.0
9.803-126.0
Label, Landa Cold Water 1
Plate, 1
33 9.803-098.0 Hanger, Hose/Wand 1
34 9.802-706.0 Bolt, Carriage, 1/4"-20 x
1-3/4" 6
35 9.802-802.0
36 9.802-776.0
Washer, 1/4" Flat
Nut, 5/16" ESNA, NC
6
4
37 8.920-261.0 Handle,
Lower Grab, Chrome
38 9.803-114.0
39 9.802-728.0
Retainer Bracket, Handle,
Black
Bolt, 3/8" x 2"
2
4
1
40 9.802-730.0
41 9.802-817.0
42 9.802-066.0
43 9.802-807.0
44 9.197-003.0
45 9.802-782.0
46 9.802-270.0
47 9.802-103.0
48 9.802-712.0
49 9.803-097.0
50 8.718-980.0
51 8.920-263.0
52 9.803-125.0
53 9.800-013.0
54 9.800-034.0
Bolt, 3/8" x 2-1/4"
Washer, 3/8" x 1"
Pad, Soft Rubber, 50 Duro 2
2
2
Washer, 3/8" SAE, Flat
Nut, 3/8" ESNA, NC
Collar, 5/8" Bore Shaft, 3010 2
6
6
Wheel & Tire Assy., 4" Steel
2
Bushing, Snap, 5/8" 2
Belt, Carriage 5/16" x 1-3/4" 4
Axle, 5/8" x 19.625" Long 1
Washer, 5/16" Flat, SAE 4
Handle, Bumper, Chrome 1
Base, CW Direct, Black 1
Label, Intend. For Indoor Use 1
Label, Clear Lexan, 2-1/4” x
4-1/2" 1
LANDA PDE • 8.913-997.0 • Rev. 02/12
2-11024D, 2-15024D, 4-20024A EXPLODED VIEW PARTS LIST
ITEM PART
55 9.802-454.0
DESCRIPTION QTY
Switch Assembly (2-11024D) 1
56 8.932-969.0 Label, Warn, Service Cord 1
57 9.802-516.0 Strain Relief, Flex 90°, Plastic
(2-15024D) 1
9.802-525.0
▲ Locknut, 1/2" Conduit
(2-15024D) 1
58 9.802-514.0 Strain Relief
(2-11024D) 1
9.802-525.0
▲ Locknut, 1/2"
(2-11024D) 1
59 99.802-695.0
▲ Nut, 10/32" Keps (2-15024D
4-20024A) 3
9.802-699.0
▲ Screw, 10/32" x 3/4" Slot Pan,
MS SS (2-15024D 4-20024A)1
9.800-040.0
▲ Label, Ground (2-15024D,
4-20024A) 1
60 9.802-695.0
61 9.803-832.0
62 9.802-436.0
Nut, 10/32" Keps (4-20024A) 4
Conduit, Water Tite, Flex 3/4"
(4-20024A) 8"
Cord, Service, 10/3 (4-20024A,
352007A) 21"
63 9.802-776.0 Nut, 5/16" ESNA 4
64 9.802-518.0 Strain Relief 3/4" 1
9.802-523.0
▲ Locknut, 3/4" (4-20024A) 1
65 9.800-049.0 Label, Manufacturer's Cleaning
Solution 1
66 9.800-040.0
▲ Label, Ground (Motor)
1
67 9.802-810.0 Washer, 5/8" Flat 2
68 9.803-834.0
▲ Washer, Reducing, 3/4" x
1
▲ Not Shown
LANDA PDE • 8.913-997.0 • Rev. 02/12
15
16
40
4
16
4-30025A, B, C EXPLODED VIEW
3
22
14
3
7
42
19
15
28
32
5
20
2
47
48
60
42
41
43
23
59
39
57
58
51
9
28
32
37
41
6
46
31
44
56
52
8
24
27
25
26
17
12
55
49
18
45
32
28
10
56
55
56 55
56
37
50
29
32
30
32
1
35
30
54
53
53
36
30
32
39
30
61
59
13
32
30
38
54
LANDA PDE • 8.913-997.0 • Rev. 02/12
16
33
34
21
29
4-30025A, B, C EXPLODED VIEW PARTS LIST
ITEM PART NO. DESCRIPTION
1 9.803-114.0 Retainer,
QTY
2
2
3
8.706-864.0
9.802-434.0
9.802-437.0
9.802-429.0
Plug, 1/8" Countersunk 1
Cord w/GFCI, 240V, 40 Amp
1
Cord, Service, SEO 10/4
(4-3000B)
Cord, Service 12/4
(4-3000C)
4
5
9.803-123.0
9.800-040.0
Handle, Bumper, Chrome 1
Label, 1
6
7
8
8.724-305.0
8.724-312.0
9.800-015.0
9.803-122.0
Overload, 24-32 Amp
(4-3000B) 1
Overload, 10.00- 16 Amp
(4-3000C) 1
Label, Warning, Service
Cord
Handle, Grab, Chrome
1
1
9 9.802-457.0 Din Rail, 35mm 4"
10 9.803-119.0 Handle, Lower Grab,
Chrome 1
11 9.802-695.0
▲ Nut, 10/32" KEPS
(4-3000A) 6
4
9.802-762.0
▲ Screw, 10/32" XD 1-1/4" 1
9.802-759.0
▲ Screw, 10/32" x 1/2",
BHSOC B1 (4-3000A) 7
5
12 9.802-064.0 Grommet, 1/8" Rubber 5
13 9.802-066.0
14 9.802-170.0
15 8.707-256.0
16 9.802-270.0
Pad, Soft Rubber, 50 Duro 2
Nipple, 3/8" x 3/8" NPT ST
Female
Pump Protector, 1/2" PTP
Wheel, 4" Steel Rim
1
1
2
17 8.712-345.0
8.712-346.0
8.712-347.0
8.712-348.0
18 8.712-398.0
19 8.715-098.0
8.715-103.0
20 8.715-304.0
21 9.802-729.0
22 8.715-480.0
Nozzle, SAQMCEG 0004
Red 1
Nozzle, SAQCMEG 1504,
Yellow 1
Nozzle, SAQMCEG 2504
Green 1
Nozzle, SAQMCEG 4004
White 1
Nozzle Compl, QCEM-6540
1
Motor 7.5 HP 1 PH C-Face
(4-30025A)
Motor 7.5 HP 3 PH C-Face
1725 RPM, 37B12X54G1
Pump, AR RKA35G30E-F17 1
Bolt, 3/8" x 2-1/4"
1
1
2
Unloader, AR-3-5 5 GPM,
3650 PSI, Black Knob 1
ITEM PART NO.
23 9.803-974.0
DESCRIPTION
Switch, GRN PB, CH
QTY
1
24 9.803-973.0
25 8.716-271.0
26 8.900-315.0
27 9.800-016.0
28 9.802-720.0
29 9.802-728.0
30 9.197-003.0
31 9.802-534.0
32 9.802-807.0
Switch, Red PB, CH
Enclosure, Fiberglass,
NEMA4X
Label, PE Off/On, For Push
Buttons
Supply
Bolt, 3/8" x 1", NC HH
Bolt, 3/8" x 2", NC HH
1
1
1
Label, Disconnect Power
1
6
4
Nut, 3/8", ESNA, NC
Block, Contact, N/C
12
1
Washer, 3/8", SAE, Flat 18
33 9.802-782.0
34 9.802-817.0
Collar, 5/8" Bore Shaft, 3010 2
Washer, 3/8" x 1" Steel
35 9.803-124.0 Base
2
1
36 9.800-013.0
37 9.802-706.0
Label, Indoor Use
9.800-034.0 Lexan,
Bolt, Carriage 1/4-20 x 1-3/4
Zinc 6
1
1
38 9.802-712.0
39 9.802-103.0
40 8.920-220.0
Bolt, Carriage 5/16 x 1-3/4 4
Bushing, 5/8" Snap 2
Axle, 5/8 x 21.5" 1
41 9.802-518.0
9.802-526.0
42 9.802-518.0
9.802-521.0
9.802-526.0
43 8.724-282.0
8.724-273.0
8.724-271.0
Strain Relief, Strt, LQ Tite
Locknut, 3/4", Conduit
1
Strain Relief, STRT, LQ Tite
1
Strain Relief, 3/4", Water Tite
(4-3000A) 1
Locknut, 3/4" Conduit 1
Contactor, 240V, CH,
Contactor, 240V, CH,
Contactor, 480V, CH
44 8.900-319.0 Label
45 8.920-219.0 Bracket, Electrical Box
1
1
1
46 9.802-535.0
47 9.802-736.0
48 9.803-517.0
Block, Contactor, N/O 1
Bolt, 1/2" x 1-1/2" NC HH 4
Washer, 1/2" Lock 4
49 9.803-126.0
50 9.803-098.0
51 9.802-425.0
9.802-429.0
9.802-437.0
Plate,
Hanger, Hose & Wand
1
1
Cord, Service, 8/3
(4-3000A) 2.75 ft.
Cord, Service, 12/4
(4-3000C) 2.75 ft.
Cord, Service 10/4
(4-3000B) 2.75 ft.
17
LANDA PDE • 8.913-997.0 • Rev. 02/12
4-30025A, B, C EXPLODED VIEW PARTS LIST
ITEM PART NO.
52 9.802-788.0
53 9.802-776.0
54 8.718-980.0
55 9.802-773.0
56 9.802-802.0
57 9.802-518.0
9.802-526.0
9.803-279.0
9.803-280.0
58 9.800-049.0
59 9.802-810.0
60 9.802-225.0
61 8.919-593.0
DESCRIPTION QTY
Nut, 5/16" Whiz Loc Flange 2
Nut, 5/16" ESNA NC 4
Washer, 5/16" Flat, SAE 4
Nut, 1/4" ESNA, NC 6
Washer, 1/4" Flat 6
Strain Relief, 3/4" LQ Tite
(4-3000A)
Locknut, 3/4" (4-3000A)
1
1
Strain Relief, 1" (4-3000B, C) 1
Locknut, 1" (4-3000B, C) 1
Label, Manufacturer's Cleaning
Solution 1
Washer, 5/8" Flat 2
Injector, Chem., Assy.
1
Axle Spacer Black Wrinkl 1
▲ Not Shown
18
LANDA PDE • 8.913-997.0 • Rev. 02/12
SPECIFICATIONS
Model GPM (PSI) Size Hose p/n Part # Model Part # Hp Part #
PDE2-11024D 2.0 1000 3.75 8.917-056.0 1-1/2 9.802-338.0
PDE2-15024D 1.8 1500 3.25 8.917-056.0 2 9.802-339.0
PDE4-20024A 3.5 2000 5.0 8.917-056.0 5 9.802-341.0
PDE4-30025A 3.5
PDE4-30025B 3.5
PDE4-30025C 3.5
3000
3000
3000
4.0
4.0
4.0
8.739-380.0 8.715-304.0 RKA35G30E-17 8.715-480.0 7-1/2
8.917-056.0 8.715-304.0 RKA35G30E-17 8.715-480.0 7-1/2
8.711-722.0 8.715-304.0 RKA35G30E-17 8.715-480.0 7-1/2
8.715-098.0
8.715-103.0
8.715-103.0
LANDA PDE • 8.913-997.0 • Rev. 02/12
19
8.904-848.0 LE 2020F.1
8.904-849.0 LE 2020S.1
8.916-553.0 LE 2825F.1
8.916-554.0 LE 2825S.1
8.904-852.0 LE 3525F.1
LE.1 SERIES PUMP EXPLODED VIEW
20
TORQUE
SPECS
Item # Ft.-lbs
36
38
48
14
17
25
8
7
13
65
18
7.6
LE.1 SERIES PUMP EXPLODED VIEW PARTS LIST
ITEM PART NO. DESCRIPTION
1 9.803-938.0 Crankcase
2* 9.804-586.0 Plunger Oil Seal
4* See Kit Below Pressure Ring 15mm
See Kit Below Pressure Ring 18mm
5* See Kit Below U-Seal, dia 15mm
See Kit Below U-Seal, dia 18mm 6
6* See Kit Below Intermediate Ring 15mm 6
See Kit Below Intermediate Ring 18mm 6
3
8 9.802-926.0 Brass Plug G1/2
1
1
3
1
3
6
3
3
QTY
1
3
11 9.803-947.0 O-Ring Ø1.78 x 15.54
13* 9.803-948.0 O-Ring Ø2.62 x 18.77 6
6
6
6
1
ITEM PART NO. DESCRIPTION QTY
16 9.803-951.0 Brass Plug G1/4
17 9.803-952.0 Manifold Stud Bolt
18 9.802-884.0 Washer
20 9.802-925.0 Brass Plug G3/8
25 9.802-939.0 Screw
26 9.803-953.0 Bearing Cover
9.804-577.0 Crankshaft
9.804-578.0 Crankshaft
9.804-579.0 Crankshaft
9.804-580.0 Crankshaft
32 9.804-581.0 O-Ring Ø3.53 x 55.56
34 9.804-583.0 Motor Flange 56C
1
1
1
1
2
1
1
1
1
1
1
1
4
1
2
12
2
1
8
8
LANDA PDE • 8.913-997.0 • Rev. 02/12
LE.1 SERIES PUMP EXPLODED VIEW PARTS LIST
ITEM PART NO. DESCRIPTION
3
3
40* See Kit Below Plunger 15mm (2020F,
2825F, 3525F) 3
QTY
4
1
42* See Kit Below O-Ring Ø1.78 x 5.28
3
3
3
45 9.803-965.0 Connecting Rod Pin
6
48 8.933-020.0 Connecting Rod Screw 6
49 9.803-969.0 O-Ring Ø2.62 x 107.62 1
1
51 9.803-197.0 Gasket 1
3
3
3
3
52 9.803-202.0 Sight Glass 1
REPAIR KIT
NUMBER
8.725-354.0 8.725-350.0 8.725-355.0
8.725-357.0
9.803-934.0
9.803-935.0
9.803-936.0
KIT DE-
SCRIPTION
ITEM
NUMBERS
INCLUDED
Plunger
Seal
15mm
2020F.1
2825F.1
3525F.1
3, 5, 7
Plunger
Seal 18mm
2020S.1
2825S.1
3, 5, 7
Complete
Seal Packing 15mm
2020F.1
2825F.1
3525F.1
3, 4, 5,
6, 7
Complete Seal
Packing 18 mm
2020S.1
2825S.1
3, 4, 5, 6, 7
Plunger
15mm
2020F.1
2825F.1
3525F.1
38, 39, 40,
41, 42, 43
Plunger
18mm
2020S.1
2825S.1
38, 39, 40,
41, 42, 43
Complete
Valve
11, 12, 13
NO. OF
CYLINDERS
KIT WILL
SERVICE
3 3 1 1 1 1 6
9.803-937.0
Plunger Oil
Seals
2
3
LANDA PDE • 8.913-997.0 • Rev. 02/12
21
RKA PUMP EXPLODED VIEW
#5-2263 RKA 1750
RPM
E VERSION 1-1/8"
WITH
N
EMA
182-184 F
LANGE
13
14
30
15 16
17
18
19
20
21
22
23
24
25
26
27
49
1
3
4
5
2
1
3
4
6
2
7
8
9
10
11
31
12
34
39
47
38
36
37
35
33
31
32
40
41
42 43
44
28
13 45
31
29
32
50
51 52 53
46
48
RKA PUMP EXPLODED VIEW PARTS LIST
22
ITEM PART NO.
1 960160
2 960090
1380740
3 1389051
4 880830
5 880581
1380690
6 820510
7 960110
840300
840320
8 880320
840290
840330
9 1380090
1380150
1380160
10 961240
11 880330
840280
840340
12 1383130
DESCRIPTION
O-Ring
QTY
6
O-Ring
Plug, 1/4" G RKA
Plug, 1/4" G Nickel RKAH 2
O-Ring 2
3
3
3
6
6
2
6
6
Piston Guide 018
Piston Guide 020
Piston Guide 022
O-Ring
Seal
3
3
3
3
3
3
3
3
3
3
3
LANDA PDE • 8.913-997.0 • Rev. 02/12
ITEM PARTNO.
13 850370
14 1380050
15 640030
16 2280240
17 1382770
18 880130
19 962010
20 962000
21 1380940
1380930
1380360
22 1380950
23 600180
24 1380920
25 1380060
26 1383050
1383020
27 1780510
28 1789010
29 1343510
DESCRIPTION
Screw
O-Ring
Bearing
Nut
Washer
Ceramic Piston 018
Ceramic Piston 020
Ceramic Piston 022
Spacer
O-Ring
Aluminum Con Rod
Bronze Con Rod
O-Ring
Screw
QTY
4
3
3
3
3
3
3
1
1
6
3
3
3
3
3
1
1
3
1
1
RKA PUMP EXPLODED VIEW PARTS LIST
ITEM PART NO.
30 1380120
1380130
1380530
1382810
31 740290
32 1980740
33 1260470
34 1380141
35 1980740
1981180
36 180101
37 820361
960870
38 1381071
1381070
1380020
1383010
1383310
39 820150
40 2280260
2280200
2280270
2280280
DESCRIPTION
0,10 mm Shim
QTY
1-3
0,20 mm Shim
0,25 mm Shim
0,05 mm Shim
O-Ring
Plug 3/8” G
Screw
Base
Plug 3/8” G RKA
Plug 3/8” G Nickel RKAH 1
O-Ring 1
Plug 1/2” G RKA 1
Plug 1/2” G Nickel RKAH 1
Pump Head Ø18 RKA 1
4
2
1
1-3
1-3
1-3
3
2
Pump Head Ø18 RKAH 1
Pump Head Ø20 RKA 1
Pump Head Ø22 RKA 1
Pump Head Ø22 RKAH 1
Screw 8
Hollow Shaft 1
Hollow Shaft
Hollow Shaft
Hollow Shaft
1
1
1
ITEM PART NO.
41 1380320
42 621170
43 1380220
44 1380210
45 1380360
46 620610
47 1381850
48 1389270
1389272
1389208
1389268
1389269
49 1080401
50 1260250
51 1260430
52 1780690
53 1140450
DESCRIPTION
Bearing
Seal
O-Ring
Shaft Cover
Electric Motor Flange
Screw
Washer
Pump Head Assem Ø18
RKA
Pump Head Assem Ø18
RKAH
Pump Head Assem Ø20
RKA
Pump Head Assem Ø22
RKA
Pump Head Assem Ø22
RKAH
Ring
Oil Indicator
Snap Ring
Disc
O-Ring
QTY
1
1
4
8
1
1
1
1
1
1
1
1
1
1
1
1
1
018
For
❍
RKA3.5G25
RKA3.5G30
RKA3.5G30H
For
●
RKA7G13
RKA7G20H
LEGEND
018
For
❒
RKA4G20
RKA4G30
RKA4G30H
020
For
▼
022
For
◆
RKA5.5G13
RKA6.5G13
RKA6.5G20H
PART NO.
2819
2820
2809
2810
2811
SPECIAL PARTS
DESCRIPTION
Kit for up to 180° F 018 High Temp
Kit for up to 180° F 020 High Temp
Viton water seals 018
Viton water seals 020
Viton water seals 022
REPAIR KITS
Pistons Oil Seals Water Seals
Kit 1857018
Kit 1887020
Kit 1888022
Valve
Kit 2864 Kit 2546018
Kit 2547020
Kit 2759022
Kit 1856
Support Rings
Kit 1829018
Kit 1815020
Kit 1816022
Item# Qty Item# Qty Item# Qty Item# Qty Item# Qty
8 3 3 6 19 3 12 3 7 3
10
11
3
3
4 6 20
21
22
23
49
3
3
3
3
3
15
27
42
43
1
1
2
1
LANDA PDE • 8.913-997.0 • Rev. 02/12
QTY
1
1
1
1
1
23
UU1 UNLOADER EXPLODED VIEW
9.175-018.0
UU1 3500PSI, UNIVERSAL UNLOADER (SPARE)
14
21
2
21
3
10
1
27
5
6
7
15
19
20
16
18
25
23
25
4
24
8
22
27
28
26
13
26
15
12
9
27
17
23
11
24
UU1 UNLOADER EXPLODED VIEW PARTS LIST
ITEM PART # DESCRIPTION KIT QTY
D 1
2 Piston
3 Piston O-Ring Back Up A, D 1
4 8.749-796.0 Main Block 1
5 9.152-372.0 Piston Ring
6 Ball Seat
7
D
C, D
1
1
O-Ring 10.5 ID x 1.5 CS A,C,D 1
8 Plunger
9 9.152-016.0 Plunger Housing
10 Bypass Spring
B
C, D
1
1
1
11 9.149-001.0 Low Pressure Port 1
12 9.152-017.0 Sliding Connector, 30mm 1
8.762-005.0 Sliding Connector, 40mm, Long 1
13 9.149-002.0 Sliding Connector H 1/2"
9.149-005.0 Sliding Connector H 3/8"
14 9.196-011.0 Plug 5/8 -18 UNF
15 O-Ring 12 ID x 2 CS
D 1
A, D 2
1
1
16 O-Ring 6 ID X 2 CS A, D 1
ITEM PART # DESCRIPTION KIT QTY
17 9.149-006.0 Sliding Connector Guide
18 O-Ring Backup
6 x 1.45 x 1.68
1
A, D 1
19
20
21
Ball Housing Assy C, D 1
O-Ring 6.75 x 1.78 BN80 A, D 1
Spring Seat C, D 2
22 Plunger Spring B 1
23 8.917-699.0 Banjo Bolt 1/2" Short 1
8.917-700.0 Banjo Bolt 1/2"-1/4" NPT Short 1
24 8.917-698.0 Banjo Bolt 3/8" Short
25 9.802-893.0 Seal Washer 3/8"
1
2
26 9.803-921.0 Seal Washer 1/2"
9.802-893.0 Seal Washer 3/8"
2
2
27 O-Ring 15 ID x 2CS A,B,D 3
28 8.706-865.0 Plug, 1/4" Countersunk
Kit A 9.104-038.0 O-Ring Repair Kit
Kit B 9.104-039.0 Outlet Kit
Kit C 9.104-040.0 Stem Basic Kit
Kit D 8.920-045.0 UU1 Complete Stem Kit
1
LANDA PDE • 8.913-997.0 • Rev. 02/12
AR-20242G UNLOADER VALVE EXPLODED VIEW
3000 PSI
6
7
1
2
3
4
5
8
9
10
11
34
33
32
35
Kit 83-2611
Pos.
Qty Pos.
Qty Pos.
Qty
4
10
1
1
16
17
1
2
25
26
1
1
16
18
17
15 14
13
12
30
31
29
11 1 20 1 35 1
19 28
13 1 21 1
20
21
15 2 23 1
27
26
25
22
23
24
AR-20242G UNLOADER VALVE EXPLODED VIEW PARTS LIST
ITEM PART DESCRIPTION
1 83-1560110 Nipple
2 83-1560140 Spring
3 83-1560100 Valve
4 83-1560150 O-Ring
5 83-1080540 Upper
6 83-1560440 Spring
7 83-1560350 Spring
8 83-1080610 Seat
9 83-1080660 Pin
10 83-1080640
11 83-391000
Seat (Upper Piston)
12 83-1540080 Bolt
13 83-1540110 Washer Ring 3/8"G
14 83-1560010 Valve
15 83-1080550 Seat
16 83-1560280 Washer Ring 3/8"G
17 83-480480
18 83-1560320 Lower
QTY
1
1
1
1
1
1
1
1
1
1
1
2
2
2
1
2
1
1
ITEM PART DESCRIPTION
19 83-1560050 By-Pass
20 83-880270
21 83-390080
22 83-1540090 Bolt
23 83-1540120 Washer Ring 1/2" Gas
24 83-1540020 By-Pass
25 83-1560290
26 83-480440
Washer Ring 1/2"
27 83-1540050 Inlet
28 83-1560410 Spring
29 83-1560420 Adjustment
30 83-1080070 Pin
31 83-1560400 Knob
32 83-1660210 Locking
33 83-180030 Set Screw M3x4
34 83-1560580 Cap
35 83-180101
QTY
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
LANDA PDE • 8.913-997.0 • Rev. 02/12
25
26
7
5
6
HOSE AND SPRAY GUN ASSEMBLY
4
3
8
1
12
Quick Connection
Only PDE4-30025C
Model
10
9
11
9
2
HOSE AND SPRAY GUN ASSEMBLY PARTS LIST
ITEM PART NO. DESCRIPTION QTY
1 9.802-166.0 Coupler, 3/8" Female 1
9.802-100.0
▲ Quick Coupler O-Ring
1
2 Hose, See Specifi cations page # 19 1
3
4
9.802-223.0
9.802-220.0
Spray Gun, Shut-Off
Wand,
1
1
5
6
9.802-164.0
9.802-096.0
Coupler, 1/4" Female
Quick Coupler O-Ring
Nozzle, See Specifi cations Page
1
1
ITEM PART NO.
7 8.712-398.0
8
9
9.802-216.0
9.802-210.0
DESCRIPTION
Nozzle, Brass Soap
QTY
1
Injector, Chemical,
Non-Adjust, 3-5GPM, .083 1
Clamp, Hose, .46 - .54 ST 2
10 9.802-251.0 Tube, 1/2" x 1/2" Clear Vinyl 6ft.
11 8.707-057.0
12 9.802-169.0
Strainer, 1/4" Hose Barb,
Plastic
Coupler, 3/8" Socket, Male
1
Brass (PDE4-30025C Only) 1
▲ Not Shown
LANDA PDE • 8.913-997.0 • Rev. 02/12
LANDA LIMITED NEW PRODUCT WARRANTY
PRESSURE WASHERS
WHAT THIS WARRANTY COVERS
All LANDA pressure washers are warranted by LANDA to the original purchaser to be free from defects in materials and workmanship under normal use, for the periods specified below. This Limited Warranty is subject to the exclusions shown below, is calculated from the date of the original purchase, and applies to the original components only. Any parts replaced under this warranty will assume the remainder of the part’s warranty period.
SEVEN YEAR PARTS AND ONE YEAR LABOR WARRANTY:
Components manufactured by LANDA, such as frames, handles, top and bottom wraps, float tanks, fuel tanks, belt guards, and internal components on the oil-end of Landa manufactured pumps. General, AR, Liberty, Comet and swash and wobble plate pumps have a one year warranty. Heating coils have a five year warranty from date of original machine purchase.
ONE YEAR PARTS AND ONE YEAR LABOR WARRANTY:
All other components, excluding normal wear items as described below, will be warranted for one year on parts and labor. Parts and labor warranty on these parts will be for one year regardless of the duration of the original component manufacturer’s part warranty.
WARRANTY PROVIDED BY OTHER MANUFACTURERS:
Motors, generators, and engines, which are warranted by their respective manufacturers, are serviced through these manufacturers’ local authorized service centers. LANDA is not authorized and has no responsibility to provide warranty service for such components.
WHAT THIS WARRANTY DOES NOT COVER
This warranty does not cover the following items:
1. Normal wear items, such as nozzles, spray guns, discharge hoses, wands, quick couplers, seals, filters, gaskets, O-rings, packings, pistons, pump valve assemblies, strainers, belts, brushes, rupture disks, fuses, pump protectors.
2. Damage or malfunctions resulting from accidents, abuse, modifications, alterations, incorrect installation, improper servicing, failure to follow manufacturer’s maintenance instructions, or use of the equipment beyond its stated usage specifications as contained in the operator’s manual.
3. Damage due to freezing, chemical deterioration, scale build up, rust, corrosion, or thermal expansion.
4. Damage to components from fluctuations in electrical or water supply.
5. Normal maintenance service, including adjustments, fuel system cleaning, and clearing of obstructions.
6. Transportation to service center, field labor charges, or freight damage.
WHAT YOU MUST DO TO OBTAIN WARRANTY SERVICE
While not required for warranty service, we request that you register your LANDA pressure washer by returning the completed registration card. In order to obtain warranty service on items warranted by LANDA, you must return the product to your Authorized LANDA Dealer, freight prepaid, with proof of purchase, within the applicable warranty period. If the product is permanently installed, you must notify your Authorized LANDA Dealer of the defect. Your Authorized LANDA
Dealer will file a claim with Landa, who must subsequently verify the defect. In most cases, the part must be returned to LANDA freight prepaid with the claim. For warranty service on components warranted by other manufacturer’s, your
Authorized LANDA Dealer can help you obtain warranty service through these manufacturers’ local authorized service centers.
LIMITATION OF LIABILITY
LANDA’S liability for special, incidental, or consequential damages is expressly disclaimed. In no event shall LANDA’S liability exceed the purchase price of the product in question. LANDA makes every effort to ensure that all illustrations and specifications are correct, however, these do not imply a warranty that the product is merchantable or fit for a particular purpose, or that the product will actually conform to the illustrations and specifications. Our obligation under this warranty is expressly limited at our option to the replacement or repair at a service facility or factory designated by us, of such part or parts as inspection shall disclose to have been defective. THE WARRANTY CONTAINED HEREIN
IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF
MERCANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY LIMITED TO THE DURATION
OF THIS WRITTEN WARRANTY. LANDA does not authorize any other party, including authorized LANDA Dealers, to make any representation or promise on behalf of LANDA, or to modify the terms, conditions, or limitations in any way.
It is the buyer’s responsibility to ensure that the installation and use of LANDA products conforms to local codes. While
LANDA attempts to assure that its products meet national codes, it cannot be responsible for how the customer chooses to use or install the product. Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
LANDA
www.landa.com
LANDA PDE • 8.913-997.0 • Rev. 02/12
Form # 8.913-997.0 • Revised 02/12 • Printed in U.S.A.

Public link updated
The public link to your chat has been updated.
Advertisement